Commit | Line | Data |
---|---|---|
fb7df12d | 1 | /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
971e827b ACM |
2 | /* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com |
3 | * | |
4 | * This program is free software; you can redistribute it and/or | |
5 | * modify it under the terms of version 2 of the GNU General Public | |
6 | * License as published by the Free Software Foundation. | |
7 | */ | |
8 | #ifndef _UAPI__LINUX_BPF_H__ | |
9 | #define _UAPI__LINUX_BPF_H__ | |
10 | ||
11 | #include <linux/types.h> | |
12 | #include <linux/bpf_common.h> | |
13 | ||
14 | /* Extended instruction set based on top of classic BPF */ | |
15 | ||
16 | /* instruction classes */ | |
d405c740 | 17 | #define BPF_JMP32 0x06 /* jmp mode in word width */ |
971e827b ACM |
18 | #define BPF_ALU64 0x07 /* alu mode in double word width */ |
19 | ||
20 | /* ld/ldx fields */ | |
d6d4f60c | 21 | #define BPF_DW 0x18 /* double word (64-bit) */ |
91c960b0 BJ |
22 | #define BPF_ATOMIC 0xc0 /* atomic memory ops - op type in immediate */ |
23 | #define BPF_XADD 0xc0 /* exclusive add - legacy name */ | |
971e827b ACM |
24 | |
25 | /* alu/jmp fields */ | |
26 | #define BPF_MOV 0xb0 /* mov reg to reg */ | |
27 | #define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */ | |
28 | ||
29 | /* change endianness of a register */ | |
30 | #define BPF_END 0xd0 /* flags for endianness conversion: */ | |
31 | #define BPF_TO_LE 0x00 /* convert to little-endian */ | |
32 | #define BPF_TO_BE 0x08 /* convert to big-endian */ | |
33 | #define BPF_FROM_LE BPF_TO_LE | |
34 | #define BPF_FROM_BE BPF_TO_BE | |
35 | ||
92b31a9a | 36 | /* jmp encodings */ |
971e827b | 37 | #define BPF_JNE 0x50 /* jump != */ |
92b31a9a DB |
38 | #define BPF_JLT 0xa0 /* LT is unsigned, '<' */ |
39 | #define BPF_JLE 0xb0 /* LE is unsigned, '<=' */ | |
971e827b ACM |
40 | #define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */ |
41 | #define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */ | |
92b31a9a DB |
42 | #define BPF_JSLT 0xc0 /* SLT is signed, '<' */ |
43 | #define BPF_JSLE 0xd0 /* SLE is signed, '<=' */ | |
971e827b ACM |
44 | #define BPF_CALL 0x80 /* function call */ |
45 | #define BPF_EXIT 0x90 /* function return */ | |
46 | ||
5ca419f2 | 47 | /* atomic op type fields (stored in immediate) */ |
5ffa2550 BJ |
48 | #define BPF_FETCH 0x01 /* not an opcode on its own, used to build others */ |
49 | #define BPF_XCHG (0xe0 | BPF_FETCH) /* atomic exchange */ | |
50 | #define BPF_CMPXCHG (0xf0 | BPF_FETCH) /* atomic compare-and-write */ | |
5ca419f2 | 51 | |
971e827b ACM |
52 | /* Register numbers */ |
53 | enum { | |
54 | BPF_REG_0 = 0, | |
55 | BPF_REG_1, | |
56 | BPF_REG_2, | |
57 | BPF_REG_3, | |
58 | BPF_REG_4, | |
59 | BPF_REG_5, | |
60 | BPF_REG_6, | |
61 | BPF_REG_7, | |
62 | BPF_REG_8, | |
63 | BPF_REG_9, | |
64 | BPF_REG_10, | |
65 | __MAX_BPF_REG, | |
66 | }; | |
67 | ||
68 | /* BPF has 10 general purpose 64-bit registers and stack frame. */ | |
69 | #define MAX_BPF_REG __MAX_BPF_REG | |
70 | ||
71 | struct bpf_insn { | |
72 | __u8 code; /* opcode */ | |
73 | __u8 dst_reg:4; /* dest register */ | |
74 | __u8 src_reg:4; /* source register */ | |
75 | __s16 off; /* signed offset */ | |
76 | __s32 imm; /* signed immediate constant */ | |
77 | }; | |
78 | ||
9a738266 MS |
79 | /* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */ |
80 | struct bpf_lpm_trie_key { | |
81 | __u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */ | |
fb53d3b6 | 82 | __u8 data[0]; /* Arbitrary size */ |
9a738266 MS |
83 | }; |
84 | ||
c419cf52 RG |
85 | struct bpf_cgroup_storage_key { |
86 | __u64 cgroup_inode_id; /* cgroup inode id */ | |
6fc88c35 | 87 | __u32 attach_type; /* program attach type (enum bpf_attach_type) */ |
c419cf52 RG |
88 | }; |
89 | ||
74fc097d YS |
90 | union bpf_iter_link_info { |
91 | struct { | |
92 | __u32 map_fd; | |
93 | } map; | |
94 | }; | |
95 | ||
242029f4 JS |
96 | /* BPF syscall commands, see bpf(2) man-page for more details. */ |
97 | /** | |
98 | * DOC: eBPF Syscall Preamble | |
99 | * | |
100 | * The operation to be performed by the **bpf**\ () system call is determined | |
101 | * by the *cmd* argument. Each operation takes an accompanying argument, | |
102 | * provided via *attr*, which is a pointer to a union of type *bpf_attr* (see | |
103 | * below). The size argument is the size of the union pointed to by *attr*. | |
104 | */ | |
105 | /** | |
106 | * DOC: eBPF Syscall Commands | |
107 | * | |
108 | * BPF_MAP_CREATE | |
109 | * Description | |
110 | * Create a map and return a file descriptor that refers to the | |
111 | * map. The close-on-exec file descriptor flag (see **fcntl**\ (2)) | |
112 | * is automatically enabled for the new file descriptor. | |
113 | * | |
114 | * Applying **close**\ (2) to the file descriptor returned by | |
115 | * **BPF_MAP_CREATE** will delete the map (but see NOTES). | |
116 | * | |
117 | * Return | |
118 | * A new file descriptor (a nonnegative integer), or -1 if an | |
119 | * error occurred (in which case, *errno* is set appropriately). | |
120 | * | |
121 | * BPF_MAP_LOOKUP_ELEM | |
122 | * Description | |
123 | * Look up an element with a given *key* in the map referred to | |
124 | * by the file descriptor *map_fd*. | |
125 | * | |
126 | * The *flags* argument may be specified as one of the | |
127 | * following: | |
128 | * | |
129 | * **BPF_F_LOCK** | |
130 | * Look up the value of a spin-locked map without | |
131 | * returning the lock. This must be specified if the | |
132 | * elements contain a spinlock. | |
133 | * | |
134 | * Return | |
135 | * Returns zero on success. On error, -1 is returned and *errno* | |
136 | * is set appropriately. | |
137 | * | |
138 | * BPF_MAP_UPDATE_ELEM | |
139 | * Description | |
140 | * Create or update an element (key/value pair) in a specified map. | |
141 | * | |
142 | * The *flags* argument should be specified as one of the | |
143 | * following: | |
144 | * | |
145 | * **BPF_ANY** | |
146 | * Create a new element or update an existing element. | |
147 | * **BPF_NOEXIST** | |
148 | * Create a new element only if it did not exist. | |
149 | * **BPF_EXIST** | |
150 | * Update an existing element. | |
151 | * **BPF_F_LOCK** | |
152 | * Update a spin_lock-ed map element. | |
153 | * | |
154 | * Return | |
155 | * Returns zero on success. On error, -1 is returned and *errno* | |
156 | * is set appropriately. | |
157 | * | |
158 | * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, | |
159 | * **E2BIG**, **EEXIST**, or **ENOENT**. | |
160 | * | |
161 | * **E2BIG** | |
162 | * The number of elements in the map reached the | |
163 | * *max_entries* limit specified at map creation time. | |
164 | * **EEXIST** | |
165 | * If *flags* specifies **BPF_NOEXIST** and the element | |
166 | * with *key* already exists in the map. | |
167 | * **ENOENT** | |
168 | * If *flags* specifies **BPF_EXIST** and the element with | |
169 | * *key* does not exist in the map. | |
170 | * | |
171 | * BPF_MAP_DELETE_ELEM | |
172 | * Description | |
173 | * Look up and delete an element by key in a specified map. | |
174 | * | |
175 | * Return | |
176 | * Returns zero on success. On error, -1 is returned and *errno* | |
177 | * is set appropriately. | |
178 | * | |
179 | * BPF_MAP_GET_NEXT_KEY | |
180 | * Description | |
181 | * Look up an element by key in a specified map and return the key | |
182 | * of the next element. Can be used to iterate over all elements | |
183 | * in the map. | |
184 | * | |
185 | * Return | |
186 | * Returns zero on success. On error, -1 is returned and *errno* | |
187 | * is set appropriately. | |
188 | * | |
189 | * The following cases can be used to iterate over all elements of | |
190 | * the map: | |
191 | * | |
192 | * * If *key* is not found, the operation returns zero and sets | |
193 | * the *next_key* pointer to the key of the first element. | |
194 | * * If *key* is found, the operation returns zero and sets the | |
195 | * *next_key* pointer to the key of the next element. | |
196 | * * If *key* is the last element, returns -1 and *errno* is set | |
197 | * to **ENOENT**. | |
198 | * | |
199 | * May set *errno* to **ENOMEM**, **EFAULT**, **EPERM**, or | |
200 | * **EINVAL** on error. | |
201 | * | |
202 | * BPF_PROG_LOAD | |
203 | * Description | |
204 | * Verify and load an eBPF program, returning a new file | |
205 | * descriptor associated with the program. | |
206 | * | |
207 | * Applying **close**\ (2) to the file descriptor returned by | |
208 | * **BPF_PROG_LOAD** will unload the eBPF program (but see NOTES). | |
209 | * | |
210 | * The close-on-exec file descriptor flag (see **fcntl**\ (2)) is | |
211 | * automatically enabled for the new file descriptor. | |
212 | * | |
213 | * Return | |
214 | * A new file descriptor (a nonnegative integer), or -1 if an | |
215 | * error occurred (in which case, *errno* is set appropriately). | |
216 | * | |
217 | * BPF_OBJ_PIN | |
218 | * Description | |
219 | * Pin an eBPF program or map referred by the specified *bpf_fd* | |
220 | * to the provided *pathname* on the filesystem. | |
221 | * | |
222 | * The *pathname* argument must not contain a dot ("."). | |
223 | * | |
224 | * On success, *pathname* retains a reference to the eBPF object, | |
225 | * preventing deallocation of the object when the original | |
226 | * *bpf_fd* is closed. This allow the eBPF object to live beyond | |
227 | * **close**\ (\ *bpf_fd*\ ), and hence the lifetime of the parent | |
228 | * process. | |
229 | * | |
230 | * Applying **unlink**\ (2) or similar calls to the *pathname* | |
231 | * unpins the object from the filesystem, removing the reference. | |
232 | * If no other file descriptors or filesystem nodes refer to the | |
233 | * same object, it will be deallocated (see NOTES). | |
234 | * | |
235 | * The filesystem type for the parent directory of *pathname* must | |
236 | * be **BPF_FS_MAGIC**. | |
237 | * | |
238 | * Return | |
239 | * Returns zero on success. On error, -1 is returned and *errno* | |
240 | * is set appropriately. | |
241 | * | |
242 | * BPF_OBJ_GET | |
243 | * Description | |
244 | * Open a file descriptor for the eBPF object pinned to the | |
245 | * specified *pathname*. | |
246 | * | |
247 | * Return | |
248 | * A new file descriptor (a nonnegative integer), or -1 if an | |
249 | * error occurred (in which case, *errno* is set appropriately). | |
250 | * | |
251 | * BPF_PROG_ATTACH | |
252 | * Description | |
253 | * Attach an eBPF program to a *target_fd* at the specified | |
254 | * *attach_type* hook. | |
255 | * | |
256 | * The *attach_type* specifies the eBPF attachment point to | |
257 | * attach the program to, and must be one of *bpf_attach_type* | |
258 | * (see below). | |
259 | * | |
260 | * The *attach_bpf_fd* must be a valid file descriptor for a | |
261 | * loaded eBPF program of a cgroup, flow dissector, LIRC, sockmap | |
262 | * or sock_ops type corresponding to the specified *attach_type*. | |
263 | * | |
264 | * The *target_fd* must be a valid file descriptor for a kernel | |
265 | * object which depends on the attach type of *attach_bpf_fd*: | |
266 | * | |
267 | * **BPF_PROG_TYPE_CGROUP_DEVICE**, | |
268 | * **BPF_PROG_TYPE_CGROUP_SKB**, | |
269 | * **BPF_PROG_TYPE_CGROUP_SOCK**, | |
270 | * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, | |
271 | * **BPF_PROG_TYPE_CGROUP_SOCKOPT**, | |
272 | * **BPF_PROG_TYPE_CGROUP_SYSCTL**, | |
273 | * **BPF_PROG_TYPE_SOCK_OPS** | |
274 | * | |
275 | * Control Group v2 hierarchy with the eBPF controller | |
276 | * enabled. Requires the kernel to be compiled with | |
277 | * **CONFIG_CGROUP_BPF**. | |
278 | * | |
279 | * **BPF_PROG_TYPE_FLOW_DISSECTOR** | |
280 | * | |
281 | * Network namespace (eg /proc/self/ns/net). | |
282 | * | |
283 | * **BPF_PROG_TYPE_LIRC_MODE2** | |
284 | * | |
285 | * LIRC device path (eg /dev/lircN). Requires the kernel | |
286 | * to be compiled with **CONFIG_BPF_LIRC_MODE2**. | |
287 | * | |
288 | * **BPF_PROG_TYPE_SK_SKB**, | |
289 | * **BPF_PROG_TYPE_SK_MSG** | |
290 | * | |
291 | * eBPF map of socket type (eg **BPF_MAP_TYPE_SOCKHASH**). | |
292 | * | |
293 | * Return | |
294 | * Returns zero on success. On error, -1 is returned and *errno* | |
295 | * is set appropriately. | |
296 | * | |
297 | * BPF_PROG_DETACH | |
298 | * Description | |
299 | * Detach the eBPF program associated with the *target_fd* at the | |
300 | * hook specified by *attach_type*. The program must have been | |
301 | * previously attached using **BPF_PROG_ATTACH**. | |
302 | * | |
303 | * Return | |
304 | * Returns zero on success. On error, -1 is returned and *errno* | |
305 | * is set appropriately. | |
306 | * | |
307 | * BPF_PROG_TEST_RUN | |
308 | * Description | |
309 | * Run the eBPF program associated with the *prog_fd* a *repeat* | |
310 | * number of times against a provided program context *ctx_in* and | |
311 | * data *data_in*, and return the modified program context | |
312 | * *ctx_out*, *data_out* (for example, packet data), result of the | |
313 | * execution *retval*, and *duration* of the test run. | |
314 | * | |
cbaa683b DB |
315 | * The sizes of the buffers provided as input and output |
316 | * parameters *ctx_in*, *ctx_out*, *data_in*, and *data_out* must | |
317 | * be provided in the corresponding variables *ctx_size_in*, | |
318 | * *ctx_size_out*, *data_size_in*, and/or *data_size_out*. If any | |
319 | * of these parameters are not provided (ie set to NULL), the | |
320 | * corresponding size field must be zero. | |
321 | * | |
322 | * Some program types have particular requirements: | |
323 | * | |
324 | * **BPF_PROG_TYPE_SK_LOOKUP** | |
325 | * *data_in* and *data_out* must be NULL. | |
cbaa683b DB |
326 | * |
327 | * **BPF_PROG_TYPE_RAW_TRACEPOINT**, | |
328 | * **BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE** | |
329 | * | |
330 | * *ctx_out*, *data_in* and *data_out* must be NULL. | |
331 | * *repeat* must be zero. | |
332 | * | |
e40fbbf0 UA |
333 | * BPF_PROG_RUN is an alias for BPF_PROG_TEST_RUN. |
334 | * | |
242029f4 JS |
335 | * Return |
336 | * Returns zero on success. On error, -1 is returned and *errno* | |
337 | * is set appropriately. | |
338 | * | |
339 | * **ENOSPC** | |
340 | * Either *data_size_out* or *ctx_size_out* is too small. | |
341 | * **ENOTSUPP** | |
342 | * This command is not supported by the program type of | |
343 | * the program referred to by *prog_fd*. | |
344 | * | |
345 | * BPF_PROG_GET_NEXT_ID | |
346 | * Description | |
347 | * Fetch the next eBPF program currently loaded into the kernel. | |
348 | * | |
349 | * Looks for the eBPF program with an id greater than *start_id* | |
350 | * and updates *next_id* on success. If no other eBPF programs | |
351 | * remain with ids higher than *start_id*, returns -1 and sets | |
352 | * *errno* to **ENOENT**. | |
353 | * | |
354 | * Return | |
355 | * Returns zero on success. On error, or when no id remains, -1 | |
356 | * is returned and *errno* is set appropriately. | |
357 | * | |
358 | * BPF_MAP_GET_NEXT_ID | |
359 | * Description | |
360 | * Fetch the next eBPF map currently loaded into the kernel. | |
361 | * | |
362 | * Looks for the eBPF map with an id greater than *start_id* | |
363 | * and updates *next_id* on success. If no other eBPF maps | |
364 | * remain with ids higher than *start_id*, returns -1 and sets | |
365 | * *errno* to **ENOENT**. | |
366 | * | |
367 | * Return | |
368 | * Returns zero on success. On error, or when no id remains, -1 | |
369 | * is returned and *errno* is set appropriately. | |
370 | * | |
371 | * BPF_PROG_GET_FD_BY_ID | |
372 | * Description | |
373 | * Open a file descriptor for the eBPF program corresponding to | |
374 | * *prog_id*. | |
375 | * | |
376 | * Return | |
377 | * A new file descriptor (a nonnegative integer), or -1 if an | |
378 | * error occurred (in which case, *errno* is set appropriately). | |
379 | * | |
380 | * BPF_MAP_GET_FD_BY_ID | |
381 | * Description | |
382 | * Open a file descriptor for the eBPF map corresponding to | |
383 | * *map_id*. | |
384 | * | |
385 | * Return | |
386 | * A new file descriptor (a nonnegative integer), or -1 if an | |
387 | * error occurred (in which case, *errno* is set appropriately). | |
388 | * | |
389 | * BPF_OBJ_GET_INFO_BY_FD | |
390 | * Description | |
391 | * Obtain information about the eBPF object corresponding to | |
392 | * *bpf_fd*. | |
393 | * | |
394 | * Populates up to *info_len* bytes of *info*, which will be in | |
395 | * one of the following formats depending on the eBPF object type | |
396 | * of *bpf_fd*: | |
397 | * | |
398 | * * **struct bpf_prog_info** | |
399 | * * **struct bpf_map_info** | |
400 | * * **struct bpf_btf_info** | |
401 | * * **struct bpf_link_info** | |
402 | * | |
403 | * Return | |
404 | * Returns zero on success. On error, -1 is returned and *errno* | |
405 | * is set appropriately. | |
406 | * | |
407 | * BPF_PROG_QUERY | |
408 | * Description | |
409 | * Obtain information about eBPF programs associated with the | |
410 | * specified *attach_type* hook. | |
411 | * | |
412 | * The *target_fd* must be a valid file descriptor for a kernel | |
413 | * object which depends on the attach type of *attach_bpf_fd*: | |
414 | * | |
415 | * **BPF_PROG_TYPE_CGROUP_DEVICE**, | |
416 | * **BPF_PROG_TYPE_CGROUP_SKB**, | |
417 | * **BPF_PROG_TYPE_CGROUP_SOCK**, | |
418 | * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, | |
419 | * **BPF_PROG_TYPE_CGROUP_SOCKOPT**, | |
420 | * **BPF_PROG_TYPE_CGROUP_SYSCTL**, | |
421 | * **BPF_PROG_TYPE_SOCK_OPS** | |
422 | * | |
423 | * Control Group v2 hierarchy with the eBPF controller | |
424 | * enabled. Requires the kernel to be compiled with | |
425 | * **CONFIG_CGROUP_BPF**. | |
426 | * | |
427 | * **BPF_PROG_TYPE_FLOW_DISSECTOR** | |
428 | * | |
429 | * Network namespace (eg /proc/self/ns/net). | |
430 | * | |
431 | * **BPF_PROG_TYPE_LIRC_MODE2** | |
432 | * | |
433 | * LIRC device path (eg /dev/lircN). Requires the kernel | |
434 | * to be compiled with **CONFIG_BPF_LIRC_MODE2**. | |
435 | * | |
436 | * **BPF_PROG_QUERY** always fetches the number of programs | |
437 | * attached and the *attach_flags* which were used to attach those | |
438 | * programs. Additionally, if *prog_ids* is nonzero and the number | |
439 | * of attached programs is less than *prog_cnt*, populates | |
440 | * *prog_ids* with the eBPF program ids of the programs attached | |
441 | * at *target_fd*. | |
442 | * | |
443 | * The following flags may alter the result: | |
444 | * | |
445 | * **BPF_F_QUERY_EFFECTIVE** | |
446 | * Only return information regarding programs which are | |
447 | * currently effective at the specified *target_fd*. | |
448 | * | |
449 | * Return | |
450 | * Returns zero on success. On error, -1 is returned and *errno* | |
451 | * is set appropriately. | |
452 | * | |
453 | * BPF_RAW_TRACEPOINT_OPEN | |
454 | * Description | |
455 | * Attach an eBPF program to a tracepoint *name* to access kernel | |
456 | * internal arguments of the tracepoint in their raw form. | |
457 | * | |
458 | * The *prog_fd* must be a valid file descriptor associated with | |
459 | * a loaded eBPF program of type **BPF_PROG_TYPE_RAW_TRACEPOINT**. | |
460 | * | |
461 | * No ABI guarantees are made about the content of tracepoint | |
462 | * arguments exposed to the corresponding eBPF program. | |
463 | * | |
464 | * Applying **close**\ (2) to the file descriptor returned by | |
465 | * **BPF_RAW_TRACEPOINT_OPEN** will delete the map (but see NOTES). | |
466 | * | |
467 | * Return | |
468 | * A new file descriptor (a nonnegative integer), or -1 if an | |
469 | * error occurred (in which case, *errno* is set appropriately). | |
470 | * | |
471 | * BPF_BTF_LOAD | |
472 | * Description | |
473 | * Verify and load BPF Type Format (BTF) metadata into the kernel, | |
474 | * returning a new file descriptor associated with the metadata. | |
475 | * BTF is described in more detail at | |
476 | * https://www.kernel.org/doc/html/latest/bpf/btf.html. | |
477 | * | |
478 | * The *btf* parameter must point to valid memory providing | |
479 | * *btf_size* bytes of BTF binary metadata. | |
480 | * | |
481 | * The returned file descriptor can be passed to other **bpf**\ () | |
482 | * subcommands such as **BPF_PROG_LOAD** or **BPF_MAP_CREATE** to | |
483 | * associate the BTF with those objects. | |
484 | * | |
485 | * Similar to **BPF_PROG_LOAD**, **BPF_BTF_LOAD** has optional | |
486 | * parameters to specify a *btf_log_buf*, *btf_log_size* and | |
487 | * *btf_log_level* which allow the kernel to return freeform log | |
488 | * output regarding the BTF verification process. | |
489 | * | |
490 | * Return | |
491 | * A new file descriptor (a nonnegative integer), or -1 if an | |
492 | * error occurred (in which case, *errno* is set appropriately). | |
493 | * | |
494 | * BPF_BTF_GET_FD_BY_ID | |
495 | * Description | |
496 | * Open a file descriptor for the BPF Type Format (BTF) | |
497 | * corresponding to *btf_id*. | |
498 | * | |
499 | * Return | |
500 | * A new file descriptor (a nonnegative integer), or -1 if an | |
501 | * error occurred (in which case, *errno* is set appropriately). | |
502 | * | |
503 | * BPF_TASK_FD_QUERY | |
504 | * Description | |
505 | * Obtain information about eBPF programs associated with the | |
506 | * target process identified by *pid* and *fd*. | |
507 | * | |
508 | * If the *pid* and *fd* are associated with a tracepoint, kprobe | |
509 | * or uprobe perf event, then the *prog_id* and *fd_type* will | |
510 | * be populated with the eBPF program id and file descriptor type | |
511 | * of type **bpf_task_fd_type**. If associated with a kprobe or | |
512 | * uprobe, the *probe_offset* and *probe_addr* will also be | |
513 | * populated. Optionally, if *buf* is provided, then up to | |
514 | * *buf_len* bytes of *buf* will be populated with the name of | |
515 | * the tracepoint, kprobe or uprobe. | |
516 | * | |
517 | * The resulting *prog_id* may be introspected in deeper detail | |
518 | * using **BPF_PROG_GET_FD_BY_ID** and **BPF_OBJ_GET_INFO_BY_FD**. | |
519 | * | |
520 | * Return | |
521 | * Returns zero on success. On error, -1 is returned and *errno* | |
522 | * is set appropriately. | |
523 | * | |
524 | * BPF_MAP_LOOKUP_AND_DELETE_ELEM | |
525 | * Description | |
526 | * Look up an element with the given *key* in the map referred to | |
527 | * by the file descriptor *fd*, and if found, delete the element. | |
528 | * | |
3e87f192 DS |
529 | * For **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map |
530 | * types, the *flags* argument needs to be set to 0, but for other | |
531 | * map types, it may be specified as: | |
532 | * | |
533 | * **BPF_F_LOCK** | |
534 | * Look up and delete the value of a spin-locked map | |
535 | * without returning the lock. This must be specified if | |
536 | * the elements contain a spinlock. | |
537 | * | |
242029f4 JS |
538 | * The **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map types |
539 | * implement this command as a "pop" operation, deleting the top | |
540 | * element rather than one corresponding to *key*. | |
541 | * The *key* and *key_len* parameters should be zeroed when | |
542 | * issuing this operation for these map types. | |
543 | * | |
544 | * This command is only valid for the following map types: | |
545 | * * **BPF_MAP_TYPE_QUEUE** | |
546 | * * **BPF_MAP_TYPE_STACK** | |
3e87f192 DS |
547 | * * **BPF_MAP_TYPE_HASH** |
548 | * * **BPF_MAP_TYPE_PERCPU_HASH** | |
549 | * * **BPF_MAP_TYPE_LRU_HASH** | |
550 | * * **BPF_MAP_TYPE_LRU_PERCPU_HASH** | |
242029f4 JS |
551 | * |
552 | * Return | |
553 | * Returns zero on success. On error, -1 is returned and *errno* | |
554 | * is set appropriately. | |
555 | * | |
556 | * BPF_MAP_FREEZE | |
557 | * Description | |
558 | * Freeze the permissions of the specified map. | |
559 | * | |
560 | * Write permissions may be frozen by passing zero *flags*. | |
561 | * Upon success, no future syscall invocations may alter the | |
562 | * map state of *map_fd*. Write operations from eBPF programs | |
563 | * are still possible for a frozen map. | |
564 | * | |
565 | * Not supported for maps of type **BPF_MAP_TYPE_STRUCT_OPS**. | |
566 | * | |
567 | * Return | |
568 | * Returns zero on success. On error, -1 is returned and *errno* | |
569 | * is set appropriately. | |
570 | * | |
571 | * BPF_BTF_GET_NEXT_ID | |
572 | * Description | |
573 | * Fetch the next BPF Type Format (BTF) object currently loaded | |
574 | * into the kernel. | |
575 | * | |
576 | * Looks for the BTF object with an id greater than *start_id* | |
577 | * and updates *next_id* on success. If no other BTF objects | |
578 | * remain with ids higher than *start_id*, returns -1 and sets | |
579 | * *errno* to **ENOENT**. | |
580 | * | |
581 | * Return | |
582 | * Returns zero on success. On error, or when no id remains, -1 | |
583 | * is returned and *errno* is set appropriately. | |
584 | * | |
585 | * BPF_MAP_LOOKUP_BATCH | |
586 | * Description | |
587 | * Iterate and fetch multiple elements in a map. | |
588 | * | |
589 | * Two opaque values are used to manage batch operations, | |
590 | * *in_batch* and *out_batch*. Initially, *in_batch* must be set | |
591 | * to NULL to begin the batched operation. After each subsequent | |
592 | * **BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant | |
593 | * *out_batch* as the *in_batch* for the next operation to | |
594 | * continue iteration from the current point. | |
595 | * | |
596 | * The *keys* and *values* are output parameters which must point | |
597 | * to memory large enough to hold *count* items based on the key | |
598 | * and value size of the map *map_fd*. The *keys* buffer must be | |
599 | * of *key_size* * *count*. The *values* buffer must be of | |
600 | * *value_size* * *count*. | |
601 | * | |
602 | * The *elem_flags* argument may be specified as one of the | |
603 | * following: | |
604 | * | |
605 | * **BPF_F_LOCK** | |
606 | * Look up the value of a spin-locked map without | |
607 | * returning the lock. This must be specified if the | |
608 | * elements contain a spinlock. | |
609 | * | |
610 | * On success, *count* elements from the map are copied into the | |
611 | * user buffer, with the keys copied into *keys* and the values | |
612 | * copied into the corresponding indices in *values*. | |
613 | * | |
614 | * If an error is returned and *errno* is not **EFAULT**, *count* | |
615 | * is set to the number of successfully processed elements. | |
616 | * | |
617 | * Return | |
618 | * Returns zero on success. On error, -1 is returned and *errno* | |
619 | * is set appropriately. | |
620 | * | |
621 | * May set *errno* to **ENOSPC** to indicate that *keys* or | |
622 | * *values* is too small to dump an entire bucket during | |
623 | * iteration of a hash-based map type. | |
624 | * | |
625 | * BPF_MAP_LOOKUP_AND_DELETE_BATCH | |
626 | * Description | |
627 | * Iterate and delete all elements in a map. | |
628 | * | |
629 | * This operation has the same behavior as | |
630 | * **BPF_MAP_LOOKUP_BATCH** with two exceptions: | |
631 | * | |
632 | * * Every element that is successfully returned is also deleted | |
633 | * from the map. This is at least *count* elements. Note that | |
634 | * *count* is both an input and an output parameter. | |
635 | * * Upon returning with *errno* set to **EFAULT**, up to | |
636 | * *count* elements may be deleted without returning the keys | |
637 | * and values of the deleted elements. | |
638 | * | |
639 | * Return | |
640 | * Returns zero on success. On error, -1 is returned and *errno* | |
641 | * is set appropriately. | |
642 | * | |
643 | * BPF_MAP_UPDATE_BATCH | |
644 | * Description | |
645 | * Update multiple elements in a map by *key*. | |
646 | * | |
647 | * The *keys* and *values* are input parameters which must point | |
648 | * to memory large enough to hold *count* items based on the key | |
649 | * and value size of the map *map_fd*. The *keys* buffer must be | |
650 | * of *key_size* * *count*. The *values* buffer must be of | |
651 | * *value_size* * *count*. | |
652 | * | |
653 | * Each element specified in *keys* is sequentially updated to the | |
654 | * value in the corresponding index in *values*. The *in_batch* | |
655 | * and *out_batch* parameters are ignored and should be zeroed. | |
656 | * | |
657 | * The *elem_flags* argument should be specified as one of the | |
658 | * following: | |
659 | * | |
660 | * **BPF_ANY** | |
661 | * Create new elements or update a existing elements. | |
662 | * **BPF_NOEXIST** | |
663 | * Create new elements only if they do not exist. | |
664 | * **BPF_EXIST** | |
665 | * Update existing elements. | |
666 | * **BPF_F_LOCK** | |
667 | * Update spin_lock-ed map elements. This must be | |
668 | * specified if the map value contains a spinlock. | |
669 | * | |
670 | * On success, *count* elements from the map are updated. | |
671 | * | |
672 | * If an error is returned and *errno* is not **EFAULT**, *count* | |
673 | * is set to the number of successfully processed elements. | |
674 | * | |
675 | * Return | |
676 | * Returns zero on success. On error, -1 is returned and *errno* | |
677 | * is set appropriately. | |
678 | * | |
679 | * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, or | |
680 | * **E2BIG**. **E2BIG** indicates that the number of elements in | |
681 | * the map reached the *max_entries* limit specified at map | |
682 | * creation time. | |
683 | * | |
684 | * May set *errno* to one of the following error codes under | |
685 | * specific circumstances: | |
686 | * | |
687 | * **EEXIST** | |
688 | * If *flags* specifies **BPF_NOEXIST** and the element | |
689 | * with *key* already exists in the map. | |
690 | * **ENOENT** | |
691 | * If *flags* specifies **BPF_EXIST** and the element with | |
692 | * *key* does not exist in the map. | |
693 | * | |
694 | * BPF_MAP_DELETE_BATCH | |
695 | * Description | |
696 | * Delete multiple elements in a map by *key*. | |
697 | * | |
698 | * The *keys* parameter is an input parameter which must point | |
699 | * to memory large enough to hold *count* items based on the key | |
700 | * size of the map *map_fd*, that is, *key_size* * *count*. | |
701 | * | |
702 | * Each element specified in *keys* is sequentially deleted. The | |
703 | * *in_batch*, *out_batch*, and *values* parameters are ignored | |
704 | * and should be zeroed. | |
705 | * | |
706 | * The *elem_flags* argument may be specified as one of the | |
707 | * following: | |
708 | * | |
709 | * **BPF_F_LOCK** | |
710 | * Look up the value of a spin-locked map without | |
711 | * returning the lock. This must be specified if the | |
712 | * elements contain a spinlock. | |
713 | * | |
714 | * On success, *count* elements from the map are updated. | |
715 | * | |
716 | * If an error is returned and *errno* is not **EFAULT**, *count* | |
717 | * is set to the number of successfully processed elements. If | |
718 | * *errno* is **EFAULT**, up to *count* elements may be been | |
719 | * deleted. | |
720 | * | |
721 | * Return | |
722 | * Returns zero on success. On error, -1 is returned and *errno* | |
723 | * is set appropriately. | |
724 | * | |
725 | * BPF_LINK_CREATE | |
726 | * Description | |
727 | * Attach an eBPF program to a *target_fd* at the specified | |
728 | * *attach_type* hook and return a file descriptor handle for | |
729 | * managing the link. | |
730 | * | |
731 | * Return | |
732 | * A new file descriptor (a nonnegative integer), or -1 if an | |
733 | * error occurred (in which case, *errno* is set appropriately). | |
734 | * | |
735 | * BPF_LINK_UPDATE | |
736 | * Description | |
737 | * Update the eBPF program in the specified *link_fd* to | |
738 | * *new_prog_fd*. | |
739 | * | |
740 | * Return | |
741 | * Returns zero on success. On error, -1 is returned and *errno* | |
742 | * is set appropriately. | |
743 | * | |
744 | * BPF_LINK_GET_FD_BY_ID | |
745 | * Description | |
746 | * Open a file descriptor for the eBPF Link corresponding to | |
747 | * *link_id*. | |
748 | * | |
749 | * Return | |
750 | * A new file descriptor (a nonnegative integer), or -1 if an | |
751 | * error occurred (in which case, *errno* is set appropriately). | |
752 | * | |
753 | * BPF_LINK_GET_NEXT_ID | |
754 | * Description | |
755 | * Fetch the next eBPF link currently loaded into the kernel. | |
756 | * | |
757 | * Looks for the eBPF link with an id greater than *start_id* | |
758 | * and updates *next_id* on success. If no other eBPF links | |
759 | * remain with ids higher than *start_id*, returns -1 and sets | |
760 | * *errno* to **ENOENT**. | |
761 | * | |
762 | * Return | |
763 | * Returns zero on success. On error, or when no id remains, -1 | |
764 | * is returned and *errno* is set appropriately. | |
765 | * | |
766 | * BPF_ENABLE_STATS | |
767 | * Description | |
768 | * Enable eBPF runtime statistics gathering. | |
769 | * | |
770 | * Runtime statistics gathering for the eBPF runtime is disabled | |
771 | * by default to minimize the corresponding performance overhead. | |
772 | * This command enables statistics globally. | |
773 | * | |
774 | * Multiple programs may independently enable statistics. | |
775 | * After gathering the desired statistics, eBPF runtime statistics | |
776 | * may be disabled again by calling **close**\ (2) for the file | |
777 | * descriptor returned by this function. Statistics will only be | |
778 | * disabled system-wide when all outstanding file descriptors | |
779 | * returned by prior calls for this subcommand are closed. | |
780 | * | |
781 | * Return | |
782 | * A new file descriptor (a nonnegative integer), or -1 if an | |
783 | * error occurred (in which case, *errno* is set appropriately). | |
784 | * | |
785 | * BPF_ITER_CREATE | |
786 | * Description | |
787 | * Create an iterator on top of the specified *link_fd* (as | |
788 | * previously created using **BPF_LINK_CREATE**) and return a | |
789 | * file descriptor that can be used to trigger the iteration. | |
790 | * | |
791 | * If the resulting file descriptor is pinned to the filesystem | |
792 | * using **BPF_OBJ_PIN**, then subsequent **read**\ (2) syscalls | |
793 | * for that path will trigger the iterator to read kernel state | |
794 | * using the eBPF program attached to *link_fd*. | |
795 | * | |
796 | * Return | |
797 | * A new file descriptor (a nonnegative integer), or -1 if an | |
798 | * error occurred (in which case, *errno* is set appropriately). | |
799 | * | |
800 | * BPF_LINK_DETACH | |
801 | * Description | |
802 | * Forcefully detach the specified *link_fd* from its | |
803 | * corresponding attachment point. | |
804 | * | |
805 | * Return | |
806 | * Returns zero on success. On error, -1 is returned and *errno* | |
807 | * is set appropriately. | |
808 | * | |
809 | * BPF_PROG_BIND_MAP | |
810 | * Description | |
811 | * Bind a map to the lifetime of an eBPF program. | |
812 | * | |
813 | * The map identified by *map_fd* is bound to the program | |
814 | * identified by *prog_fd* and only released when *prog_fd* is | |
815 | * released. This may be used in cases where metadata should be | |
816 | * associated with a program which otherwise does not contain any | |
817 | * references to the map (for example, embedded in the eBPF | |
818 | * program instructions). | |
819 | * | |
820 | * Return | |
821 | * Returns zero on success. On error, -1 is returned and *errno* | |
822 | * is set appropriately. | |
823 | * | |
824 | * NOTES | |
825 | * eBPF objects (maps and programs) can be shared between processes. | |
826 | * | |
827 | * * After **fork**\ (2), the child inherits file descriptors | |
828 | * referring to the same eBPF objects. | |
829 | * * File descriptors referring to eBPF objects can be transferred over | |
830 | * **unix**\ (7) domain sockets. | |
831 | * * File descriptors referring to eBPF objects can be duplicated in the | |
832 | * usual way, using **dup**\ (2) and similar calls. | |
833 | * * File descriptors referring to eBPF objects can be pinned to the | |
834 | * filesystem using the **BPF_OBJ_PIN** command of **bpf**\ (2). | |
835 | * | |
836 | * An eBPF object is deallocated only after all file descriptors referring | |
837 | * to the object have been closed and no references remain pinned to the | |
838 | * filesystem or attached (for example, bound to a program or device). | |
839 | */ | |
971e827b ACM |
840 | enum bpf_cmd { |
841 | BPF_MAP_CREATE, | |
842 | BPF_MAP_LOOKUP_ELEM, | |
843 | BPF_MAP_UPDATE_ELEM, | |
844 | BPF_MAP_DELETE_ELEM, | |
845 | BPF_MAP_GET_NEXT_KEY, | |
846 | BPF_PROG_LOAD, | |
847 | BPF_OBJ_PIN, | |
848 | BPF_OBJ_GET, | |
0cb34dc2 JS |
849 | BPF_PROG_ATTACH, |
850 | BPF_PROG_DETACH, | |
30848873 | 851 | BPF_PROG_TEST_RUN, |
5d67f349 | 852 | BPF_PROG_RUN = BPF_PROG_TEST_RUN, |
95b9afd3 MKL |
853 | BPF_PROG_GET_NEXT_ID, |
854 | BPF_MAP_GET_NEXT_ID, | |
855 | BPF_PROG_GET_FD_BY_ID, | |
856 | BPF_MAP_GET_FD_BY_ID, | |
857 | BPF_OBJ_GET_INFO_BY_FD, | |
defd9c47 | 858 | BPF_PROG_QUERY, |
a0fe3e57 | 859 | BPF_RAW_TRACEPOINT_OPEN, |
3bd86a84 | 860 | BPF_BTF_LOAD, |
7a01f6a3 | 861 | BPF_BTF_GET_FD_BY_ID, |
30687ad9 | 862 | BPF_TASK_FD_QUERY, |
da4e1b15 | 863 | BPF_MAP_LOOKUP_AND_DELETE_ELEM, |
c83fef6b | 864 | BPF_MAP_FREEZE, |
d2648e1e | 865 | BPF_BTF_GET_NEXT_ID, |
a1e3a3b8 YS |
866 | BPF_MAP_LOOKUP_BATCH, |
867 | BPF_MAP_LOOKUP_AND_DELETE_BATCH, | |
868 | BPF_MAP_UPDATE_BATCH, | |
869 | BPF_MAP_DELETE_BATCH, | |
af6eea57 | 870 | BPF_LINK_CREATE, |
cc4f864b | 871 | BPF_LINK_UPDATE, |
f2e10bff AN |
872 | BPF_LINK_GET_FD_BY_ID, |
873 | BPF_LINK_GET_NEXT_ID, | |
d46edd67 | 874 | BPF_ENABLE_STATS, |
ac51d99b | 875 | BPF_ITER_CREATE, |
2e49527e | 876 | BPF_LINK_DETACH, |
ef15314a | 877 | BPF_PROG_BIND_MAP, |
971e827b ACM |
878 | }; |
879 | ||
880 | enum bpf_map_type { | |
881 | BPF_MAP_TYPE_UNSPEC, | |
882 | BPF_MAP_TYPE_HASH, | |
883 | BPF_MAP_TYPE_ARRAY, | |
884 | BPF_MAP_TYPE_PROG_ARRAY, | |
885 | BPF_MAP_TYPE_PERF_EVENT_ARRAY, | |
886 | BPF_MAP_TYPE_PERCPU_HASH, | |
887 | BPF_MAP_TYPE_PERCPU_ARRAY, | |
888 | BPF_MAP_TYPE_STACK_TRACE, | |
791cceb8 | 889 | BPF_MAP_TYPE_CGROUP_ARRAY, |
0cb34dc2 JS |
890 | BPF_MAP_TYPE_LRU_HASH, |
891 | BPF_MAP_TYPE_LRU_PERCPU_HASH, | |
9a738266 | 892 | BPF_MAP_TYPE_LPM_TRIE, |
fb30d4b7 MKL |
893 | BPF_MAP_TYPE_ARRAY_OF_MAPS, |
894 | BPF_MAP_TYPE_HASH_OF_MAPS, | |
81f6bf81 | 895 | BPF_MAP_TYPE_DEVMAP, |
69e8cc13 | 896 | BPF_MAP_TYPE_SOCKMAP, |
6710e112 | 897 | BPF_MAP_TYPE_CPUMAP, |
cb9c28ef | 898 | BPF_MAP_TYPE_XSKMAP, |
b8b394fa | 899 | BPF_MAP_TYPE_SOCKHASH, |
c419cf52 | 900 | BPF_MAP_TYPE_CGROUP_STORAGE, |
3bd43a8c | 901 | BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, |
25025e0a | 902 | BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE, |
da4e1b15 MV |
903 | BPF_MAP_TYPE_QUEUE, |
904 | BPF_MAP_TYPE_STACK, | |
948d930e | 905 | BPF_MAP_TYPE_SK_STORAGE, |
10fbe211 | 906 | BPF_MAP_TYPE_DEVMAP_HASH, |
17328d61 | 907 | BPF_MAP_TYPE_STRUCT_OPS, |
457f4436 | 908 | BPF_MAP_TYPE_RINGBUF, |
8ea63684 | 909 | BPF_MAP_TYPE_INODE_STORAGE, |
4cf1bc1f | 910 | BPF_MAP_TYPE_TASK_STORAGE, |
9330986c | 911 | BPF_MAP_TYPE_BLOOM_FILTER, |
971e827b ACM |
912 | }; |
913 | ||
6c4fc209 DB |
914 | /* Note that tracing related programs such as |
915 | * BPF_PROG_TYPE_{KPROBE,TRACEPOINT,PERF_EVENT,RAW_TRACEPOINT} | |
916 | * are not subject to a stable API since kernel internal data | |
917 | * structures can change from release to release and may | |
918 | * therefore break existing tracing BPF programs. Tracing BPF | |
919 | * programs correspond to /a/ specific kernel which is to be | |
920 | * analyzed, and not /a/ specific kernel /and/ all future ones. | |
921 | */ | |
971e827b ACM |
922 | enum bpf_prog_type { |
923 | BPF_PROG_TYPE_UNSPEC, | |
924 | BPF_PROG_TYPE_SOCKET_FILTER, | |
925 | BPF_PROG_TYPE_KPROBE, | |
926 | BPF_PROG_TYPE_SCHED_CLS, | |
927 | BPF_PROG_TYPE_SCHED_ACT, | |
928 | BPF_PROG_TYPE_TRACEPOINT, | |
791cceb8 | 929 | BPF_PROG_TYPE_XDP, |
0cb34dc2 JS |
930 | BPF_PROG_TYPE_PERF_EVENT, |
931 | BPF_PROG_TYPE_CGROUP_SKB, | |
932 | BPF_PROG_TYPE_CGROUP_SOCK, | |
933 | BPF_PROG_TYPE_LWT_IN, | |
934 | BPF_PROG_TYPE_LWT_OUT, | |
935 | BPF_PROG_TYPE_LWT_XMIT, | |
04df41e3 | 936 | BPF_PROG_TYPE_SOCK_OPS, |
69e8cc13 | 937 | BPF_PROG_TYPE_SK_SKB, |
ebc614f6 | 938 | BPF_PROG_TYPE_CGROUP_DEVICE, |
82a86168 | 939 | BPF_PROG_TYPE_SK_MSG, |
a0fe3e57 | 940 | BPF_PROG_TYPE_RAW_TRACEPOINT, |
e50b0a6f | 941 | BPF_PROG_TYPE_CGROUP_SOCK_ADDR, |
c99a84ea | 942 | BPF_PROG_TYPE_LWT_SEG6LOCAL, |
6bdd533c | 943 | BPF_PROG_TYPE_LIRC_MODE2, |
3bd43a8c | 944 | BPF_PROG_TYPE_SK_REUSEPORT, |
2f965e3f | 945 | BPF_PROG_TYPE_FLOW_DISSECTOR, |
196398d4 | 946 | BPF_PROG_TYPE_CGROUP_SYSCTL, |
4635b0ae | 947 | BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, |
aa6ab647 | 948 | BPF_PROG_TYPE_CGROUP_SOCKOPT, |
12a8654b | 949 | BPF_PROG_TYPE_TRACING, |
17328d61 | 950 | BPF_PROG_TYPE_STRUCT_OPS, |
2db6eab1 | 951 | BPF_PROG_TYPE_EXT, |
fc611f47 | 952 | BPF_PROG_TYPE_LSM, |
a352b32a | 953 | BPF_PROG_TYPE_SK_LOOKUP, |
79a7f8bd | 954 | BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */ |
971e827b ACM |
955 | }; |
956 | ||
0cb34dc2 JS |
957 | enum bpf_attach_type { |
958 | BPF_CGROUP_INET_INGRESS, | |
959 | BPF_CGROUP_INET_EGRESS, | |
960 | BPF_CGROUP_INET_SOCK_CREATE, | |
04df41e3 | 961 | BPF_CGROUP_SOCK_OPS, |
464bc0fd JF |
962 | BPF_SK_SKB_STREAM_PARSER, |
963 | BPF_SK_SKB_STREAM_VERDICT, | |
ebc614f6 | 964 | BPF_CGROUP_DEVICE, |
82a86168 | 965 | BPF_SK_MSG_VERDICT, |
e50b0a6f AI |
966 | BPF_CGROUP_INET4_BIND, |
967 | BPF_CGROUP_INET6_BIND, | |
622adafb AI |
968 | BPF_CGROUP_INET4_CONNECT, |
969 | BPF_CGROUP_INET6_CONNECT, | |
1d436885 AI |
970 | BPF_CGROUP_INET4_POST_BIND, |
971 | BPF_CGROUP_INET6_POST_BIND, | |
3024cf82 AI |
972 | BPF_CGROUP_UDP4_SENDMSG, |
973 | BPF_CGROUP_UDP6_SENDMSG, | |
6bdd533c | 974 | BPF_LIRC_MODE2, |
2f965e3f | 975 | BPF_FLOW_DISSECTOR, |
196398d4 | 976 | BPF_CGROUP_SYSCTL, |
3dbc6ada DB |
977 | BPF_CGROUP_UDP4_RECVMSG, |
978 | BPF_CGROUP_UDP6_RECVMSG, | |
aa6ab647 SF |
979 | BPF_CGROUP_GETSOCKOPT, |
980 | BPF_CGROUP_SETSOCKOPT, | |
12a8654b | 981 | BPF_TRACE_RAW_TP, |
b8c54ea4 AS |
982 | BPF_TRACE_FENTRY, |
983 | BPF_TRACE_FEXIT, | |
ae240823 | 984 | BPF_MODIFY_RETURN, |
fc611f47 | 985 | BPF_LSM_MAC, |
15d83c4d | 986 | BPF_TRACE_ITER, |
1b66d253 DB |
987 | BPF_CGROUP_INET4_GETPEERNAME, |
988 | BPF_CGROUP_INET6_GETPEERNAME, | |
989 | BPF_CGROUP_INET4_GETSOCKNAME, | |
990 | BPF_CGROUP_INET6_GETSOCKNAME, | |
fbee97fe | 991 | BPF_XDP_DEVMAP, |
e8b012e9 | 992 | BPF_CGROUP_INET_SOCK_RELEASE, |
92164774 | 993 | BPF_XDP_CPUMAP, |
a352b32a | 994 | BPF_SK_LOOKUP, |
dc8698ca | 995 | BPF_XDP, |
a7ba4558 | 996 | BPF_SK_SKB_VERDICT, |
d5e4ddae KI |
997 | BPF_SK_REUSEPORT_SELECT, |
998 | BPF_SK_REUSEPORT_SELECT_OR_MIGRATE, | |
b89fbfbb | 999 | BPF_PERF_EVENT, |
0dcac272 | 1000 | BPF_TRACE_KPROBE_MULTI, |
0cb34dc2 JS |
1001 | __MAX_BPF_ATTACH_TYPE |
1002 | }; | |
1003 | ||
1004 | #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE | |
1005 | ||
f2e10bff AN |
1006 | enum bpf_link_type { |
1007 | BPF_LINK_TYPE_UNSPEC = 0, | |
1008 | BPF_LINK_TYPE_RAW_TRACEPOINT = 1, | |
1009 | BPF_LINK_TYPE_TRACING = 2, | |
1010 | BPF_LINK_TYPE_CGROUP = 3, | |
de4e05ca | 1011 | BPF_LINK_TYPE_ITER = 4, |
7f045a49 | 1012 | BPF_LINK_TYPE_NETNS = 5, |
dc8698ca | 1013 | BPF_LINK_TYPE_XDP = 6, |
b89fbfbb | 1014 | BPF_LINK_TYPE_PERF_EVENT = 7, |
0dcac272 | 1015 | BPF_LINK_TYPE_KPROBE_MULTI = 8, |
f2e10bff AN |
1016 | |
1017 | MAX_BPF_LINK_TYPE, | |
1018 | }; | |
1019 | ||
defd9c47 AS |
1020 | /* cgroup-bpf attach flags used in BPF_PROG_ATTACH command |
1021 | * | |
1022 | * NONE(default): No further bpf programs allowed in the subtree. | |
1023 | * | |
1024 | * BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, | |
1025 | * the program in this cgroup yields to sub-cgroup program. | |
1026 | * | |
1027 | * BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, | |
1028 | * that cgroup program gets run in addition to the program in this cgroup. | |
1029 | * | |
1030 | * Only one program is allowed to be attached to a cgroup with | |
1031 | * NONE or BPF_F_ALLOW_OVERRIDE flag. | |
1032 | * Attaching another program on top of NONE or BPF_F_ALLOW_OVERRIDE will | |
1033 | * release old program and attach the new one. Attach flags has to match. | |
1034 | * | |
1035 | * Multiple programs are allowed to be attached to a cgroup with | |
1036 | * BPF_F_ALLOW_MULTI flag. They are executed in FIFO order | |
1037 | * (those that were attached first, run first) | |
1038 | * The programs of sub-cgroup are executed first, then programs of | |
1039 | * this cgroup and then programs of parent cgroup. | |
1040 | * When children program makes decision (like picking TCP CA or sock bind) | |
1041 | * parent program has a chance to override it. | |
1042 | * | |
7dd68b32 AI |
1043 | * With BPF_F_ALLOW_MULTI a new program is added to the end of the list of |
1044 | * programs for a cgroup. Though it's possible to replace an old program at | |
1045 | * any position by also specifying BPF_F_REPLACE flag and position itself in | |
1046 | * replace_bpf_fd attribute. Old program at this position will be released. | |
1047 | * | |
defd9c47 AS |
1048 | * A cgroup with MULTI or OVERRIDE flag allows any attach flags in sub-cgroups. |
1049 | * A cgroup with NONE doesn't allow any programs in sub-cgroups. | |
1050 | * Ex1: | |
1051 | * cgrp1 (MULTI progs A, B) -> | |
1052 | * cgrp2 (OVERRIDE prog C) -> | |
1053 | * cgrp3 (MULTI prog D) -> | |
1054 | * cgrp4 (OVERRIDE prog E) -> | |
1055 | * cgrp5 (NONE prog F) | |
1056 | * the event in cgrp5 triggers execution of F,D,A,B in that order. | |
1057 | * if prog F is detached, the execution is E,D,A,B | |
1058 | * if prog F and D are detached, the execution is E,A,B | |
1059 | * if prog F, E and D are detached, the execution is C,A,B | |
1060 | * | |
1061 | * All eligible programs are executed regardless of return code from | |
1062 | * earlier programs. | |
5463b3d0 SR |
1063 | */ |
1064 | #define BPF_F_ALLOW_OVERRIDE (1U << 0) | |
defd9c47 | 1065 | #define BPF_F_ALLOW_MULTI (1U << 1) |
7dd68b32 | 1066 | #define BPF_F_REPLACE (1U << 2) |
5463b3d0 | 1067 | |
e07b98d9 DM |
1068 | /* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the |
1069 | * verifier will perform strict alignment checking as if the kernel | |
1070 | * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set, | |
1071 | * and NET_IP_ALIGN defined to 2. | |
1072 | */ | |
1073 | #define BPF_F_STRICT_ALIGNMENT (1U << 0) | |
1074 | ||
e9ee9efc DM |
1075 | /* If BPF_F_ANY_ALIGNMENT is used in BPF_PROF_LOAD command, the |
1076 | * verifier will allow any alignment whatsoever. On platforms | |
1077 | * with strict alignment requirements for loads ands stores (such | |
1078 | * as sparc and mips) the verifier validates that all loads and | |
1079 | * stores provably follow this requirement. This flag turns that | |
1080 | * checking and enforcement off. | |
1081 | * | |
1082 | * It is mostly used for testing when we want to validate the | |
1083 | * context and memory access aspects of the verifier, but because | |
1084 | * of an unaligned access the alignment check would trigger before | |
1085 | * the one we are interested in. | |
1086 | */ | |
1087 | #define BPF_F_ANY_ALIGNMENT (1U << 1) | |
1088 | ||
9ce33e33 JW |
1089 | /* BPF_F_TEST_RND_HI32 is used in BPF_PROG_LOAD command for testing purpose. |
1090 | * Verifier does sub-register def/use analysis and identifies instructions whose | |
1091 | * def only matters for low 32-bit, high 32-bit is never referenced later | |
1092 | * through implicit zero extension. Therefore verifier notifies JIT back-ends | |
1093 | * that it is safe to ignore clearing high 32-bit for these instructions. This | |
1094 | * saves some back-ends a lot of code-gen. However such optimization is not | |
1095 | * necessary on some arches, for example x86_64, arm64 etc, whose JIT back-ends | |
1096 | * hence hasn't used verifier's analysis result. But, we really want to have a | |
1097 | * way to be able to verify the correctness of the described optimization on | |
1098 | * x86_64 on which testsuites are frequently exercised. | |
1099 | * | |
1100 | * So, this flag is introduced. Once it is set, verifier will randomize high | |
1101 | * 32-bit for those instructions who has been identified as safe to ignore them. | |
1102 | * Then, if verifier is not doing correct analysis, such randomization will | |
1103 | * regress tests to expose bugs. | |
1104 | */ | |
1105 | #define BPF_F_TEST_RND_HI32 (1U << 2) | |
1106 | ||
0fc2e0b8 AS |
1107 | /* The verifier internal test flag. Behavior is undefined */ |
1108 | #define BPF_F_TEST_STATE_FREQ (1U << 3) | |
1109 | ||
1e6c62a8 AS |
1110 | /* If BPF_F_SLEEPABLE is used in BPF_PROG_LOAD command, the verifier will |
1111 | * restrict map and helper usage for such programs. Sleepable BPF programs can | |
1112 | * only be attached to hooks where kernel execution context allows sleeping. | |
1113 | * Such programs are allowed to use helpers that may sleep like | |
1114 | * bpf_copy_from_user(). | |
1115 | */ | |
1116 | #define BPF_F_SLEEPABLE (1U << 4) | |
1117 | ||
c2f2cdbe LB |
1118 | /* If BPF_F_XDP_HAS_FRAGS is used in BPF_PROG_LOAD command, the loaded program |
1119 | * fully support xdp frags. | |
1120 | */ | |
1121 | #define BPF_F_XDP_HAS_FRAGS (1U << 5) | |
1122 | ||
0dcac272 JO |
1123 | /* link_create.kprobe_multi.flags used in LINK_CREATE command for |
1124 | * BPF_TRACE_KPROBE_MULTI attach type to create return probe. | |
1125 | */ | |
1126 | #define BPF_F_KPROBE_MULTI_RETURN (1U << 0) | |
1127 | ||
c83fef6b | 1128 | /* When BPF ldimm64's insn[0].src_reg != 0 then this can have |
4976b718 | 1129 | * the following extensions: |
c83fef6b | 1130 | * |
387544bf AS |
1131 | * insn[0].src_reg: BPF_PSEUDO_MAP_[FD|IDX] |
1132 | * insn[0].imm: map fd or fd_idx | |
4976b718 HL |
1133 | * insn[1].imm: 0 |
1134 | * insn[0].off: 0 | |
1135 | * insn[1].off: 0 | |
1136 | * ldimm64 rewrite: address of map | |
1137 | * verifier type: CONST_PTR_TO_MAP | |
c83fef6b | 1138 | */ |
971e827b | 1139 | #define BPF_PSEUDO_MAP_FD 1 |
387544bf AS |
1140 | #define BPF_PSEUDO_MAP_IDX 5 |
1141 | ||
1142 | /* insn[0].src_reg: BPF_PSEUDO_MAP_[IDX_]VALUE | |
1143 | * insn[0].imm: map fd or fd_idx | |
4976b718 HL |
1144 | * insn[1].imm: offset into value |
1145 | * insn[0].off: 0 | |
1146 | * insn[1].off: 0 | |
1147 | * ldimm64 rewrite: address of map[0]+offset | |
1148 | * verifier type: PTR_TO_MAP_VALUE | |
1149 | */ | |
387544bf AS |
1150 | #define BPF_PSEUDO_MAP_VALUE 2 |
1151 | #define BPF_PSEUDO_MAP_IDX_VALUE 6 | |
1152 | ||
4976b718 HL |
1153 | /* insn[0].src_reg: BPF_PSEUDO_BTF_ID |
1154 | * insn[0].imm: kernel btd id of VAR | |
1155 | * insn[1].imm: 0 | |
1156 | * insn[0].off: 0 | |
1157 | * insn[1].off: 0 | |
1158 | * ldimm64 rewrite: address of the kernel variable | |
1159 | * verifier type: PTR_TO_BTF_ID or PTR_TO_MEM, depending on whether the var | |
1160 | * is struct/union. | |
1161 | */ | |
1162 | #define BPF_PSEUDO_BTF_ID 3 | |
69c087ba YS |
1163 | /* insn[0].src_reg: BPF_PSEUDO_FUNC |
1164 | * insn[0].imm: insn offset to the func | |
1165 | * insn[1].imm: 0 | |
1166 | * insn[0].off: 0 | |
1167 | * insn[1].off: 0 | |
1168 | * ldimm64 rewrite: address of the function | |
1169 | * verifier type: PTR_TO_FUNC. | |
1170 | */ | |
1171 | #define BPF_PSEUDO_FUNC 4 | |
971e827b | 1172 | |
48cca7e4 AS |
1173 | /* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative |
1174 | * offset to another bpf function | |
1175 | */ | |
1176 | #define BPF_PSEUDO_CALL 1 | |
e6ac2450 MKL |
1177 | /* when bpf_call->src_reg == BPF_PSEUDO_KFUNC_CALL, |
1178 | * bpf_call->imm == btf_id of a BTF_KIND_FUNC in the running kernel | |
1179 | */ | |
1180 | #define BPF_PSEUDO_KFUNC_CALL 2 | |
48cca7e4 | 1181 | |
971e827b | 1182 | /* flags for BPF_MAP_UPDATE_ELEM command */ |
1aae4bdd AN |
1183 | enum { |
1184 | BPF_ANY = 0, /* create new element or update existing */ | |
1185 | BPF_NOEXIST = 1, /* create new element if it didn't exist */ | |
1186 | BPF_EXIST = 2, /* update existing element */ | |
1187 | BPF_F_LOCK = 4, /* spin_lock-ed map_lookup/map_update */ | |
1188 | }; | |
971e827b | 1189 | |
ad17d0e6 | 1190 | /* flags for BPF_MAP_CREATE command */ |
1aae4bdd AN |
1191 | enum { |
1192 | BPF_F_NO_PREALLOC = (1U << 0), | |
0cb34dc2 JS |
1193 | /* Instead of having one common LRU list in the |
1194 | * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list | |
1195 | * which can scale and perform better. | |
1196 | * Note, the LRU nodes (including free nodes) cannot be moved | |
1197 | * across different LRU lists. | |
1198 | */ | |
1aae4bdd | 1199 | BPF_F_NO_COMMON_LRU = (1U << 1), |
ad17d0e6 | 1200 | /* Specify numa node during map creation */ |
1aae4bdd | 1201 | BPF_F_NUMA_NODE = (1U << 2), |
88cda1c9 | 1202 | |
c83fef6b | 1203 | /* Flags for accessing BPF object from syscall side. */ |
1aae4bdd AN |
1204 | BPF_F_RDONLY = (1U << 3), |
1205 | BPF_F_WRONLY = (1U << 4), | |
e27afb84 | 1206 | |
81f77fd0 | 1207 | /* Flag for stack_map, store build_id+offset instead of pointer */ |
1aae4bdd | 1208 | BPF_F_STACK_BUILD_ID = (1U << 5), |
81f77fd0 | 1209 | |
608114e4 | 1210 | /* Zero-initialize hash function seed. This should only be used for testing. */ |
1aae4bdd | 1211 | BPF_F_ZERO_SEED = (1U << 6), |
608114e4 | 1212 | |
c83fef6b | 1213 | /* Flags for accessing BPF object from program side. */ |
1aae4bdd AN |
1214 | BPF_F_RDONLY_PROG = (1U << 7), |
1215 | BPF_F_WRONLY_PROG = (1U << 8), | |
c83fef6b | 1216 | |
9e819ffc | 1217 | /* Clone map from listener for newly accepted socket */ |
1aae4bdd | 1218 | BPF_F_CLONE = (1U << 9), |
9e819ffc | 1219 | |
fc970227 | 1220 | /* Enable memory-mapping BPF map */ |
1aae4bdd | 1221 | BPF_F_MMAPABLE = (1U << 10), |
792caccc SL |
1222 | |
1223 | /* Share perf_event among processes */ | |
1224 | BPF_F_PRESERVE_ELEMS = (1U << 11), | |
4a8f87e6 DB |
1225 | |
1226 | /* Create a map that is suitable to be an inner map with dynamic max entries */ | |
1227 | BPF_F_INNER_MAP = (1U << 12), | |
1aae4bdd | 1228 | }; |
fc970227 | 1229 | |
f5bfcd95 AI |
1230 | /* Flags for BPF_PROG_QUERY. */ |
1231 | ||
1232 | /* Query effective (directly attached + inherited from ancestor cgroups) | |
1233 | * programs that will be executed for events within a cgroup. | |
1234 | * attach_flags with this flag are returned only for directly attached programs. | |
1235 | */ | |
608114e4 LB |
1236 | #define BPF_F_QUERY_EFFECTIVE (1U << 0) |
1237 | ||
1b4d60ec SL |
1238 | /* Flags for BPF_PROG_TEST_RUN */ |
1239 | ||
1240 | /* If set, run the test on the cpu specified by bpf_attr.test.cpu */ | |
1241 | #define BPF_F_TEST_RUN_ON_CPU (1U << 0) | |
b530e9e1 THJ |
1242 | /* If set, XDP frames will be transmitted after processing */ |
1243 | #define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1) | |
1b4d60ec | 1244 | |
d46edd67 SL |
1245 | /* type for BPF_ENABLE_STATS */ |
1246 | enum bpf_stats_type { | |
1247 | /* enabled run_time_ns and run_cnt */ | |
1248 | BPF_STATS_RUN_TIME = 0, | |
1249 | }; | |
1250 | ||
81f77fd0 SL |
1251 | enum bpf_stack_build_id_status { |
1252 | /* user space need an empty entry to identify end of a trace */ | |
1253 | BPF_STACK_BUILD_ID_EMPTY = 0, | |
1254 | /* with valid build_id and offset */ | |
1255 | BPF_STACK_BUILD_ID_VALID = 1, | |
1256 | /* couldn't get build_id, fallback to ip */ | |
1257 | BPF_STACK_BUILD_ID_IP = 2, | |
1258 | }; | |
1259 | ||
1260 | #define BPF_BUILD_ID_SIZE 20 | |
1261 | struct bpf_stack_build_id { | |
1262 | __s32 status; | |
1263 | unsigned char build_id[BPF_BUILD_ID_SIZE]; | |
1264 | union { | |
1265 | __u64 offset; | |
1266 | __u64 ip; | |
1267 | }; | |
1268 | }; | |
1269 | ||
1aae4bdd AN |
1270 | #define BPF_OBJ_NAME_LEN 16U |
1271 | ||
971e827b ACM |
1272 | union bpf_attr { |
1273 | struct { /* anonymous struct used by BPF_MAP_CREATE command */ | |
1274 | __u32 map_type; /* one of enum bpf_map_type */ | |
1275 | __u32 key_size; /* size of key in bytes */ | |
1276 | __u32 value_size; /* size of value in bytes */ | |
1277 | __u32 max_entries; /* max number of entries in a map */ | |
ad17d0e6 MKL |
1278 | __u32 map_flags; /* BPF_MAP_CREATE related |
1279 | * flags defined above. | |
1280 | */ | |
fb30d4b7 | 1281 | __u32 inner_map_fd; /* fd pointing to the inner map */ |
ad17d0e6 MKL |
1282 | __u32 numa_node; /* numa node (effective only if |
1283 | * BPF_F_NUMA_NODE is set). | |
1284 | */ | |
067cae47 | 1285 | char map_name[BPF_OBJ_NAME_LEN]; |
a3884572 | 1286 | __u32 map_ifindex; /* ifindex of netdev to create on */ |
3bd86a84 | 1287 | __u32 btf_fd; /* fd pointing to a BTF type data */ |
f03b15d3 MKL |
1288 | __u32 btf_key_type_id; /* BTF type_id of the key */ |
1289 | __u32 btf_value_type_id; /* BTF type_id of the value */ | |
17328d61 MKL |
1290 | __u32 btf_vmlinux_value_type_id;/* BTF type_id of a kernel- |
1291 | * struct stored as the | |
1292 | * map value | |
1293 | */ | |
9330986c JK |
1294 | /* Any per-map-type extra fields |
1295 | * | |
1296 | * BPF_MAP_TYPE_BLOOM_FILTER - the lowest 4 bits indicate the | |
1297 | * number of hash functions (if 0, the bloom filter will default | |
1298 | * to using 5 hash functions). | |
1299 | */ | |
1300 | __u64 map_extra; | |
971e827b ACM |
1301 | }; |
1302 | ||
1303 | struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ | |
1304 | __u32 map_fd; | |
1305 | __aligned_u64 key; | |
1306 | union { | |
1307 | __aligned_u64 value; | |
1308 | __aligned_u64 next_key; | |
1309 | }; | |
1310 | __u64 flags; | |
1311 | }; | |
1312 | ||
a1e3a3b8 YS |
1313 | struct { /* struct used by BPF_MAP_*_BATCH commands */ |
1314 | __aligned_u64 in_batch; /* start batch, | |
1315 | * NULL to start from beginning | |
1316 | */ | |
1317 | __aligned_u64 out_batch; /* output: next start batch */ | |
1318 | __aligned_u64 keys; | |
1319 | __aligned_u64 values; | |
1320 | __u32 count; /* input/output: | |
1321 | * input: # of key/value | |
1322 | * elements | |
1323 | * output: # of filled elements | |
1324 | */ | |
1325 | __u32 map_fd; | |
1326 | __u64 elem_flags; | |
1327 | __u64 flags; | |
1328 | } batch; | |
1329 | ||
971e827b ACM |
1330 | struct { /* anonymous struct used by BPF_PROG_LOAD command */ |
1331 | __u32 prog_type; /* one of enum bpf_prog_type */ | |
1332 | __u32 insn_cnt; | |
1333 | __aligned_u64 insns; | |
1334 | __aligned_u64 license; | |
1335 | __u32 log_level; /* verbosity level of verifier */ | |
1336 | __u32 log_size; /* size of user buffer */ | |
1337 | __aligned_u64 log_buf; /* user supplied buffer */ | |
6c4fc209 | 1338 | __u32 kern_version; /* not used */ |
e07b98d9 | 1339 | __u32 prog_flags; |
067cae47 | 1340 | char prog_name[BPF_OBJ_NAME_LEN]; |
1f6f4cb7 | 1341 | __u32 prog_ifindex; /* ifindex of netdev to prep for */ |
d7be143b AI |
1342 | /* For some prog types expected attach type must be known at |
1343 | * load time to verify attach type specific parts of prog | |
1344 | * (context accesses, allowed helpers, etc). | |
1345 | */ | |
1346 | __u32 expected_attach_type; | |
cc19435c YS |
1347 | __u32 prog_btf_fd; /* fd pointing to BTF type data */ |
1348 | __u32 func_info_rec_size; /* userspace bpf_func_info size */ | |
1349 | __aligned_u64 func_info; /* func info */ | |
1350 | __u32 func_info_cnt; /* number of bpf_func_info records */ | |
ee491d8d MKL |
1351 | __u32 line_info_rec_size; /* userspace bpf_line_info size */ |
1352 | __aligned_u64 line_info; /* line info */ | |
1353 | __u32 line_info_cnt; /* number of bpf_line_info records */ | |
ccfe29eb | 1354 | __u32 attach_btf_id; /* in-kernel BTF type id to attach to */ |
290248a5 AN |
1355 | union { |
1356 | /* valid prog_fd to attach to bpf prog */ | |
1357 | __u32 attach_prog_fd; | |
1358 | /* or valid module BTF object fd or 0 to attach to vmlinux */ | |
1359 | __u32 attach_btf_obj_fd; | |
1360 | }; | |
fbd94c7a | 1361 | __u32 core_relo_cnt; /* number of bpf_core_relo */ |
387544bf | 1362 | __aligned_u64 fd_array; /* array of FDs */ |
fbd94c7a AS |
1363 | __aligned_u64 core_relos; |
1364 | __u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */ | |
971e827b ACM |
1365 | }; |
1366 | ||
1367 | struct { /* anonymous struct used by BPF_OBJ_* commands */ | |
1368 | __aligned_u64 pathname; | |
1369 | __u32 bpf_fd; | |
e27afb84 | 1370 | __u32 file_flags; |
971e827b | 1371 | }; |
0cb34dc2 JS |
1372 | |
1373 | struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */ | |
1374 | __u32 target_fd; /* container object to attach to */ | |
1375 | __u32 attach_bpf_fd; /* eBPF program to attach */ | |
1376 | __u32 attach_type; | |
5463b3d0 | 1377 | __u32 attach_flags; |
7dd68b32 AI |
1378 | __u32 replace_bpf_fd; /* previously attached eBPF |
1379 | * program to replace if | |
1380 | * BPF_F_REPLACE is used | |
1381 | */ | |
0cb34dc2 | 1382 | }; |
30848873 AS |
1383 | |
1384 | struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */ | |
1385 | __u32 prog_fd; | |
1386 | __u32 retval; | |
2587a974 LB |
1387 | __u32 data_size_in; /* input: len of data_in */ |
1388 | __u32 data_size_out; /* input/output: len of data_out | |
1389 | * returns ENOSPC if data_out | |
1390 | * is too small. | |
1391 | */ | |
30848873 AS |
1392 | __aligned_u64 data_in; |
1393 | __aligned_u64 data_out; | |
1394 | __u32 repeat; | |
1395 | __u32 duration; | |
5e903c65 SF |
1396 | __u32 ctx_size_in; /* input: len of ctx_in */ |
1397 | __u32 ctx_size_out; /* input/output: len of ctx_out | |
1398 | * returns ENOSPC if ctx_out | |
1399 | * is too small. | |
1400 | */ | |
1401 | __aligned_u64 ctx_in; | |
1402 | __aligned_u64 ctx_out; | |
1b4d60ec SL |
1403 | __u32 flags; |
1404 | __u32 cpu; | |
b530e9e1 | 1405 | __u32 batch_size; |
30848873 | 1406 | } test; |
95b9afd3 MKL |
1407 | |
1408 | struct { /* anonymous struct used by BPF_*_GET_*_ID */ | |
1409 | union { | |
1410 | __u32 start_id; | |
1411 | __u32 prog_id; | |
1412 | __u32 map_id; | |
7a01f6a3 | 1413 | __u32 btf_id; |
f2e10bff | 1414 | __u32 link_id; |
95b9afd3 MKL |
1415 | }; |
1416 | __u32 next_id; | |
e27afb84 | 1417 | __u32 open_flags; |
95b9afd3 MKL |
1418 | }; |
1419 | ||
1420 | struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */ | |
1421 | __u32 bpf_fd; | |
1422 | __u32 info_len; | |
1423 | __aligned_u64 info; | |
1424 | } info; | |
defd9c47 AS |
1425 | |
1426 | struct { /* anonymous struct used by BPF_PROG_QUERY command */ | |
1427 | __u32 target_fd; /* container object to query */ | |
1428 | __u32 attach_type; | |
1429 | __u32 query_flags; | |
1430 | __u32 attach_flags; | |
1431 | __aligned_u64 prog_ids; | |
1432 | __u32 prog_cnt; | |
1433 | } query; | |
a0fe3e57 | 1434 | |
af6eea57 | 1435 | struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ |
a0fe3e57 AS |
1436 | __u64 name; |
1437 | __u32 prog_fd; | |
1438 | } raw_tracepoint; | |
3bd86a84 MKL |
1439 | |
1440 | struct { /* anonymous struct for BPF_BTF_LOAD */ | |
1441 | __aligned_u64 btf; | |
1442 | __aligned_u64 btf_log_buf; | |
1443 | __u32 btf_size; | |
1444 | __u32 btf_log_size; | |
1445 | __u32 btf_log_level; | |
1446 | }; | |
30687ad9 YS |
1447 | |
1448 | struct { | |
1449 | __u32 pid; /* input: pid */ | |
1450 | __u32 fd; /* input: fd */ | |
1451 | __u32 flags; /* input: flags */ | |
1452 | __u32 buf_len; /* input/output: buf len */ | |
1453 | __aligned_u64 buf; /* input/output: | |
1454 | * tp_name for tracepoint | |
1455 | * symbol for kprobe | |
1456 | * filename for uprobe | |
1457 | */ | |
1458 | __u32 prog_id; /* output: prod_id */ | |
1459 | __u32 fd_type; /* output: BPF_FD_TYPE_* */ | |
1460 | __u64 probe_offset; /* output: probe_offset */ | |
1461 | __u64 probe_addr; /* output: probe_addr */ | |
1462 | } task_fd_query; | |
af6eea57 AN |
1463 | |
1464 | struct { /* struct used by BPF_LINK_CREATE command */ | |
1465 | __u32 prog_fd; /* eBPF program to attach */ | |
dc8698ca AN |
1466 | union { |
1467 | __u32 target_fd; /* object to attach to */ | |
1468 | __u32 target_ifindex; /* target ifindex */ | |
1469 | }; | |
af6eea57 AN |
1470 | __u32 attach_type; /* attach type */ |
1471 | __u32 flags; /* extra flags */ | |
4a1e7c0c THJ |
1472 | union { |
1473 | __u32 target_btf_id; /* btf_id of target to attach to */ | |
1474 | struct { | |
1475 | __aligned_u64 iter_info; /* extra bpf_iter_link_info */ | |
1476 | __u32 iter_info_len; /* iter_info length */ | |
1477 | }; | |
82e6b1ee AN |
1478 | struct { |
1479 | /* black box user-provided value passed through | |
1480 | * to BPF program at the execution time and | |
1481 | * accessible through bpf_get_attach_cookie() BPF helper | |
1482 | */ | |
1483 | __u64 bpf_cookie; | |
1484 | } perf_event; | |
0dcac272 JO |
1485 | struct { |
1486 | __u32 flags; | |
1487 | __u32 cnt; | |
1488 | __aligned_u64 syms; | |
1489 | __aligned_u64 addrs; | |
ca74823c | 1490 | __aligned_u64 cookies; |
0dcac272 | 1491 | } kprobe_multi; |
4a1e7c0c | 1492 | }; |
af6eea57 | 1493 | } link_create; |
cc4f864b AN |
1494 | |
1495 | struct { /* struct used by BPF_LINK_UPDATE command */ | |
1496 | __u32 link_fd; /* link fd */ | |
1497 | /* new program fd to update link with */ | |
1498 | __u32 new_prog_fd; | |
1499 | __u32 flags; /* extra flags */ | |
1500 | /* expected link's program fd; is specified only if | |
1501 | * BPF_F_REPLACE flag is set in flags */ | |
1502 | __u32 old_prog_fd; | |
1503 | } link_update; | |
1504 | ||
2e49527e AN |
1505 | struct { |
1506 | __u32 link_fd; | |
1507 | } link_detach; | |
1508 | ||
d46edd67 SL |
1509 | struct { /* struct used by BPF_ENABLE_STATS command */ |
1510 | __u32 type; | |
1511 | } enable_stats; | |
1512 | ||
ac51d99b YS |
1513 | struct { /* struct used by BPF_ITER_CREATE command */ |
1514 | __u32 link_fd; | |
1515 | __u32 flags; | |
1516 | } iter_create; | |
1517 | ||
ef15314a YZ |
1518 | struct { /* struct used by BPF_PROG_BIND_MAP command */ |
1519 | __u32 prog_fd; | |
1520 | __u32 map_fd; | |
1521 | __u32 flags; /* extra flags */ | |
1522 | } prog_bind_map; | |
1523 | ||
971e827b ACM |
1524 | } __attribute__((aligned(8))); |
1525 | ||
9cde0c88 QM |
1526 | /* The description below is an attempt at providing documentation to eBPF |
1527 | * developers about the multiple available eBPF helper functions. It can be | |
1528 | * parsed and used to produce a manual page. The workflow is the following, | |
1529 | * and requires the rst2man utility: | |
1530 | * | |
923a932c | 1531 | * $ ./scripts/bpf_doc.py \ |
9cde0c88 QM |
1532 | * --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst |
1533 | * $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7 | |
1534 | * $ man /tmp/bpf-helpers.7 | |
1535 | * | |
1536 | * Note that in order to produce this external documentation, some RST | |
1537 | * formatting is used in the descriptions to get "bold" and "italics" in | |
1538 | * manual pages. Also note that the few trailing white spaces are | |
1539 | * intentional, removing them would break paragraphs for rst2man. | |
1540 | * | |
1541 | * Start of BPF helper function descriptions: | |
1542 | * | |
1543 | * void *bpf_map_lookup_elem(struct bpf_map *map, const void *key) | |
1544 | * Description | |
1545 | * Perform a lookup in *map* for an entry associated to *key*. | |
1546 | * Return | |
1547 | * Map value associated to *key*, or **NULL** if no entry was | |
1548 | * found. | |
1549 | * | |
bdb7b79b | 1550 | * long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags) |
9cde0c88 QM |
1551 | * Description |
1552 | * Add or update the value of the entry associated to *key* in | |
1553 | * *map* with *value*. *flags* is one of: | |
1554 | * | |
1555 | * **BPF_NOEXIST** | |
1556 | * The entry for *key* must not exist in the map. | |
1557 | * **BPF_EXIST** | |
1558 | * The entry for *key* must already exist in the map. | |
1559 | * **BPF_ANY** | |
1560 | * No condition on the existence of the entry for *key*. | |
1561 | * | |
1562 | * Flag value **BPF_NOEXIST** cannot be used for maps of types | |
1563 | * **BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY** (all | |
1564 | * elements always exist), the helper would return an error. | |
1565 | * Return | |
1566 | * 0 on success, or a negative error in case of failure. | |
1567 | * | |
bdb7b79b | 1568 | * long bpf_map_delete_elem(struct bpf_map *map, const void *key) |
9cde0c88 QM |
1569 | * Description |
1570 | * Delete entry with *key* from *map*. | |
1571 | * Return | |
1572 | * 0 on success, or a negative error in case of failure. | |
1573 | * | |
bdb7b79b | 1574 | * long bpf_probe_read(void *dst, u32 size, const void *unsafe_ptr) |
9cde0c88 QM |
1575 | * Description |
1576 | * For tracing programs, safely attempt to read *size* bytes from | |
6ae08ae3 DB |
1577 | * kernel space address *unsafe_ptr* and store the data in *dst*. |
1578 | * | |
ff20460e QM |
1579 | * Generally, use **bpf_probe_read_user**\ () or |
1580 | * **bpf_probe_read_kernel**\ () instead. | |
9cde0c88 QM |
1581 | * Return |
1582 | * 0 on success, or a negative error in case of failure. | |
0cb34dc2 JS |
1583 | * |
1584 | * u64 bpf_ktime_get_ns(void) | |
9cde0c88 QM |
1585 | * Description |
1586 | * Return the time elapsed since system boot, in nanoseconds. | |
71d19214 | 1587 | * Does not include time the system was suspended. |
ff20460e | 1588 | * See: **clock_gettime**\ (**CLOCK_MONOTONIC**) |
9cde0c88 QM |
1589 | * Return |
1590 | * Current *ktime*. | |
1591 | * | |
bdb7b79b | 1592 | * long bpf_trace_printk(const char *fmt, u32 fmt_size, ...) |
9cde0c88 QM |
1593 | * Description |
1594 | * This helper is a "printk()-like" facility for debugging. It | |
1595 | * prints a message defined by format *fmt* (of size *fmt_size*) | |
1596 | * to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if | |
1597 | * available. It can take up to three additional **u64** | |
1598 | * arguments (as an eBPF helpers, the total number of arguments is | |
1599 | * limited to five). | |
1600 | * | |
1601 | * Each time the helper is called, it appends a line to the trace. | |
1f8919b1 PW |
1602 | * Lines are discarded while *\/sys/kernel/debug/tracing/trace* is |
1603 | * open, use *\/sys/kernel/debug/tracing/trace_pipe* to avoid this. | |
9cde0c88 QM |
1604 | * The format of the trace is customizable, and the exact output |
1605 | * one will get depends on the options set in | |
1606 | * *\/sys/kernel/debug/tracing/trace_options* (see also the | |
1607 | * *README* file under the same directory). However, it usually | |
1608 | * defaults to something like: | |
1609 | * | |
1610 | * :: | |
1611 | * | |
1612 | * telnet-470 [001] .N.. 419421.045894: 0x00000001: <formatted msg> | |
1613 | * | |
1614 | * In the above: | |
1615 | * | |
1616 | * * ``telnet`` is the name of the current task. | |
1617 | * * ``470`` is the PID of the current task. | |
1618 | * * ``001`` is the CPU number on which the task is | |
1619 | * running. | |
1620 | * * In ``.N..``, each character refers to a set of | |
1621 | * options (whether irqs are enabled, scheduling | |
1622 | * options, whether hard/softirqs are running, level of | |
1623 | * preempt_disabled respectively). **N** means that | |
1624 | * **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED** | |
1625 | * are set. | |
1626 | * * ``419421.045894`` is a timestamp. | |
1627 | * * ``0x00000001`` is a fake value used by BPF for the | |
1628 | * instruction pointer register. | |
1629 | * * ``<formatted msg>`` is the message formatted with | |
1630 | * *fmt*. | |
1631 | * | |
1632 | * The conversion specifiers supported by *fmt* are similar, but | |
1633 | * more limited than for printk(). They are **%d**, **%i**, | |
1634 | * **%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**, | |
1635 | * **%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size | |
1636 | * of field, padding with zeroes, etc.) is available, and the | |
1637 | * helper will return **-EINVAL** (but print nothing) if it | |
1638 | * encounters an unknown specifier. | |
1639 | * | |
1640 | * Also, note that **bpf_trace_printk**\ () is slow, and should | |
1641 | * only be used for debugging purposes. For this reason, a notice | |
b16fc097 | 1642 | * block (spanning several lines) is printed to kernel logs and |
9cde0c88 QM |
1643 | * states that the helper should not be used "for production use" |
1644 | * the first time this helper is used (or more precisely, when | |
1645 | * **trace_printk**\ () buffers are allocated). For passing values | |
1646 | * to user space, perf events should be preferred. | |
1647 | * Return | |
1648 | * The number of bytes written to the buffer, or a negative error | |
1649 | * in case of failure. | |
1650 | * | |
1651 | * u32 bpf_get_prandom_u32(void) | |
1652 | * Description | |
1653 | * Get a pseudo-random number. | |
1654 | * | |
1655 | * From a security point of view, this helper uses its own | |
1656 | * pseudo-random internal state, and cannot be used to infer the | |
1657 | * seed of other random functions in the kernel. However, it is | |
1658 | * essential to note that the generator used by the helper is not | |
1659 | * cryptographically secure. | |
1660 | * Return | |
1661 | * A random 32-bit unsigned value. | |
1662 | * | |
1663 | * u32 bpf_get_smp_processor_id(void) | |
1664 | * Description | |
1665 | * Get the SMP (symmetric multiprocessing) processor id. Note that | |
33656275 | 1666 | * all programs run with migration disabled, which means that the |
9cde0c88 QM |
1667 | * SMP processor id is stable during all the execution of the |
1668 | * program. | |
1669 | * Return | |
1670 | * The SMP id of the processor running the program. | |
1671 | * | |
bdb7b79b | 1672 | * long bpf_skb_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len, u64 flags) |
9cde0c88 QM |
1673 | * Description |
1674 | * Store *len* bytes from address *from* into the packet | |
1675 | * associated to *skb*, at *offset*. *flags* are a combination of | |
1676 | * **BPF_F_RECOMPUTE_CSUM** (automatically recompute the | |
1677 | * checksum for the packet after storing the bytes) and | |
1678 | * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\ | |
1679 | * **->swhash** and *skb*\ **->l4hash** to 0). | |
1680 | * | |
c1fe1e70 | 1681 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
1682 | * packet buffer. Therefore, at load time, all checks on pointers |
1683 | * previously done by the verifier are invalidated and must be | |
1684 | * performed again, if the helper is used in combination with | |
1685 | * direct packet access. | |
1686 | * Return | |
1687 | * 0 on success, or a negative error in case of failure. | |
1688 | * | |
bdb7b79b | 1689 | * long bpf_l3_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 size) |
9cde0c88 QM |
1690 | * Description |
1691 | * Recompute the layer 3 (e.g. IP) checksum for the packet | |
1692 | * associated to *skb*. Computation is incremental, so the helper | |
1693 | * must know the former value of the header field that was | |
1694 | * modified (*from*), the new value of this field (*to*), and the | |
1695 | * number of bytes (2 or 4) for this field, stored in *size*. | |
1696 | * Alternatively, it is possible to store the difference between | |
1697 | * the previous and the new values of the header field in *to*, by | |
1698 | * setting *from* and *size* to 0. For both methods, *offset* | |
1699 | * indicates the location of the IP checksum within the packet. | |
1700 | * | |
1701 | * This helper works in combination with **bpf_csum_diff**\ (), | |
1702 | * which does not update the checksum in-place, but offers more | |
1703 | * flexibility and can handle sizes larger than 2 or 4 for the | |
1704 | * checksum to update. | |
1705 | * | |
c1fe1e70 | 1706 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
1707 | * packet buffer. Therefore, at load time, all checks on pointers |
1708 | * previously done by the verifier are invalidated and must be | |
1709 | * performed again, if the helper is used in combination with | |
1710 | * direct packet access. | |
1711 | * Return | |
1712 | * 0 on success, or a negative error in case of failure. | |
1713 | * | |
bdb7b79b | 1714 | * long bpf_l4_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 flags) |
9cde0c88 QM |
1715 | * Description |
1716 | * Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the | |
1717 | * packet associated to *skb*. Computation is incremental, so the | |
1718 | * helper must know the former value of the header field that was | |
1719 | * modified (*from*), the new value of this field (*to*), and the | |
1720 | * number of bytes (2 or 4) for this field, stored on the lowest | |
1721 | * four bits of *flags*. Alternatively, it is possible to store | |
1722 | * the difference between the previous and the new values of the | |
1723 | * header field in *to*, by setting *from* and the four lowest | |
1724 | * bits of *flags* to 0. For both methods, *offset* indicates the | |
1725 | * location of the IP checksum within the packet. In addition to | |
1726 | * the size of the field, *flags* can be added (bitwise OR) actual | |
1727 | * flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left | |
1728 | * untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and | |
1729 | * for updates resulting in a null checksum the value is set to | |
1730 | * **CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates | |
1731 | * the checksum is to be computed against a pseudo-header. | |
1732 | * | |
1733 | * This helper works in combination with **bpf_csum_diff**\ (), | |
1734 | * which does not update the checksum in-place, but offers more | |
1735 | * flexibility and can handle sizes larger than 2 or 4 for the | |
1736 | * checksum to update. | |
1737 | * | |
c1fe1e70 | 1738 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
1739 | * packet buffer. Therefore, at load time, all checks on pointers |
1740 | * previously done by the verifier are invalidated and must be | |
1741 | * performed again, if the helper is used in combination with | |
1742 | * direct packet access. | |
1743 | * Return | |
1744 | * 0 on success, or a negative error in case of failure. | |
1745 | * | |
bdb7b79b | 1746 | * long bpf_tail_call(void *ctx, struct bpf_map *prog_array_map, u32 index) |
9cde0c88 QM |
1747 | * Description |
1748 | * This special helper is used to trigger a "tail call", or in | |
1749 | * other words, to jump into another eBPF program. The same stack | |
1750 | * frame is used (but values on stack and in registers for the | |
1751 | * caller are not accessible to the callee). This mechanism allows | |
1752 | * for program chaining, either for raising the maximum number of | |
1753 | * available eBPF instructions, or to execute given programs in | |
1754 | * conditional blocks. For security reasons, there is an upper | |
1755 | * limit to the number of successive tail calls that can be | |
1756 | * performed. | |
1757 | * | |
1758 | * Upon call of this helper, the program attempts to jump into a | |
1759 | * program referenced at index *index* in *prog_array_map*, a | |
1760 | * special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes | |
1761 | * *ctx*, a pointer to the context. | |
1762 | * | |
1763 | * If the call succeeds, the kernel immediately runs the first | |
1764 | * instruction of the new program. This is not a function call, | |
1765 | * and it never returns to the previous program. If the call | |
1766 | * fails, then the helper has no effect, and the caller continues | |
1767 | * to run its subsequent instructions. A call can fail if the | |
1768 | * destination program for the jump does not exist (i.e. *index* | |
1769 | * is superior to the number of entries in *prog_array_map*), or | |
1770 | * if the maximum number of tail calls has been reached for this | |
1771 | * chain of programs. This limit is defined in the kernel by the | |
1772 | * macro **MAX_TAIL_CALL_CNT** (not accessible to user space), | |
ebf7f6f0 | 1773 | * which is currently set to 33. |
9cde0c88 QM |
1774 | * Return |
1775 | * 0 on success, or a negative error in case of failure. | |
1776 | * | |
bdb7b79b | 1777 | * long bpf_clone_redirect(struct sk_buff *skb, u32 ifindex, u64 flags) |
9cde0c88 QM |
1778 | * Description |
1779 | * Clone and redirect the packet associated to *skb* to another | |
1780 | * net device of index *ifindex*. Both ingress and egress | |
1781 | * interfaces can be used for redirection. The **BPF_F_INGRESS** | |
1782 | * value in *flags* is used to make the distinction (ingress path | |
1783 | * is selected if the flag is present, egress path otherwise). | |
1784 | * This is the only flag supported for now. | |
1785 | * | |
1786 | * In comparison with **bpf_redirect**\ () helper, | |
1787 | * **bpf_clone_redirect**\ () has the associated cost of | |
1788 | * duplicating the packet buffer, but this can be executed out of | |
1789 | * the eBPF program. Conversely, **bpf_redirect**\ () is more | |
1790 | * efficient, but it is handled through an action code where the | |
1791 | * redirection happens only after the eBPF program has returned. | |
1792 | * | |
c1fe1e70 | 1793 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
1794 | * packet buffer. Therefore, at load time, all checks on pointers |
1795 | * previously done by the verifier are invalidated and must be | |
1796 | * performed again, if the helper is used in combination with | |
1797 | * direct packet access. | |
1798 | * Return | |
1799 | * 0 on success, or a negative error in case of failure. | |
0cb34dc2 JS |
1800 | * |
1801 | * u64 bpf_get_current_pid_tgid(void) | |
e40fbbf0 UA |
1802 | * Description |
1803 | * Get the current pid and tgid. | |
9cde0c88 QM |
1804 | * Return |
1805 | * A 64-bit integer containing the current tgid and pid, and | |
1806 | * created as such: | |
1807 | * *current_task*\ **->tgid << 32 \|** | |
1808 | * *current_task*\ **->pid**. | |
0cb34dc2 JS |
1809 | * |
1810 | * u64 bpf_get_current_uid_gid(void) | |
e40fbbf0 UA |
1811 | * Description |
1812 | * Get the current uid and gid. | |
9cde0c88 QM |
1813 | * Return |
1814 | * A 64-bit integer containing the current GID and UID, and | |
1815 | * created as such: *current_gid* **<< 32 \|** *current_uid*. | |
1816 | * | |
bdb7b79b | 1817 | * long bpf_get_current_comm(void *buf, u32 size_of_buf) |
9cde0c88 QM |
1818 | * Description |
1819 | * Copy the **comm** attribute of the current task into *buf* of | |
1820 | * *size_of_buf*. The **comm** attribute contains the name of | |
1821 | * the executable (excluding the path) for the current task. The | |
1822 | * *size_of_buf* must be strictly positive. On success, the | |
1823 | * helper makes sure that the *buf* is NUL-terminated. On failure, | |
1824 | * it is filled with zeroes. | |
1825 | * Return | |
1826 | * 0 on success, or a negative error in case of failure. | |
1827 | * | |
1828 | * u32 bpf_get_cgroup_classid(struct sk_buff *skb) | |
1829 | * Description | |
1830 | * Retrieve the classid for the current task, i.e. for the net_cls | |
1831 | * cgroup to which *skb* belongs. | |
1832 | * | |
1833 | * This helper can be used on TC egress path, but not on ingress. | |
1834 | * | |
1835 | * The net_cls cgroup provides an interface to tag network packets | |
1836 | * based on a user-provided identifier for all traffic coming from | |
1837 | * the tasks belonging to the related cgroup. See also the related | |
1838 | * kernel documentation, available from the Linux sources in file | |
da82c92f | 1839 | * *Documentation/admin-guide/cgroup-v1/net_cls.rst*. |
9cde0c88 QM |
1840 | * |
1841 | * The Linux kernel has two versions for cgroups: there are | |
1842 | * cgroups v1 and cgroups v2. Both are available to users, who can | |
1843 | * use a mixture of them, but note that the net_cls cgroup is for | |
1844 | * cgroup v1 only. This makes it incompatible with BPF programs | |
1845 | * run on cgroups, which is a cgroup-v2-only feature (a socket can | |
1846 | * only hold data for one version of cgroups at a time). | |
1847 | * | |
1848 | * This helper is only available is the kernel was compiled with | |
1849 | * the **CONFIG_CGROUP_NET_CLASSID** configuration option set to | |
1850 | * "**y**" or to "**m**". | |
1851 | * Return | |
1852 | * The classid, or 0 for the default unconfigured classid. | |
1853 | * | |
bdb7b79b | 1854 | * long bpf_skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) |
9cde0c88 QM |
1855 | * Description |
1856 | * Push a *vlan_tci* (VLAN tag control information) of protocol | |
1857 | * *vlan_proto* to the packet associated to *skb*, then update | |
1858 | * the checksum. Note that if *vlan_proto* is different from | |
1859 | * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to | |
1860 | * be **ETH_P_8021Q**. | |
1861 | * | |
c1fe1e70 | 1862 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
1863 | * packet buffer. Therefore, at load time, all checks on pointers |
1864 | * previously done by the verifier are invalidated and must be | |
1865 | * performed again, if the helper is used in combination with | |
1866 | * direct packet access. | |
1867 | * Return | |
1868 | * 0 on success, or a negative error in case of failure. | |
1869 | * | |
bdb7b79b | 1870 | * long bpf_skb_vlan_pop(struct sk_buff *skb) |
9cde0c88 QM |
1871 | * Description |
1872 | * Pop a VLAN header from the packet associated to *skb*. | |
1873 | * | |
c1fe1e70 | 1874 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
1875 | * packet buffer. Therefore, at load time, all checks on pointers |
1876 | * previously done by the verifier are invalidated and must be | |
1877 | * performed again, if the helper is used in combination with | |
1878 | * direct packet access. | |
1879 | * Return | |
1880 | * 0 on success, or a negative error in case of failure. | |
1881 | * | |
bdb7b79b | 1882 | * long bpf_skb_get_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) |
9cde0c88 QM |
1883 | * Description |
1884 | * Get tunnel metadata. This helper takes a pointer *key* to an | |
1885 | * empty **struct bpf_tunnel_key** of **size**, that will be | |
1886 | * filled with tunnel metadata for the packet associated to *skb*. | |
1887 | * The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which | |
1888 | * indicates that the tunnel is based on IPv6 protocol instead of | |
1889 | * IPv4. | |
1890 | * | |
1891 | * The **struct bpf_tunnel_key** is an object that generalizes the | |
1892 | * principal parameters used by various tunneling protocols into a | |
1893 | * single struct. This way, it can be used to easily make a | |
1894 | * decision based on the contents of the encapsulation header, | |
1895 | * "summarized" in this struct. In particular, it holds the IP | |
1896 | * address of the remote end (IPv4 or IPv6, depending on the case) | |
1897 | * in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also, | |
1898 | * this struct exposes the *key*\ **->tunnel_id**, which is | |
1899 | * generally mapped to a VNI (Virtual Network Identifier), making | |
1900 | * it programmable together with the **bpf_skb_set_tunnel_key**\ | |
1901 | * () helper. | |
1902 | * | |
1903 | * Let's imagine that the following code is part of a program | |
1904 | * attached to the TC ingress interface, on one end of a GRE | |
1905 | * tunnel, and is supposed to filter out all messages coming from | |
1906 | * remote ends with IPv4 address other than 10.0.0.1: | |
1907 | * | |
1908 | * :: | |
1909 | * | |
1910 | * int ret; | |
1911 | * struct bpf_tunnel_key key = {}; | |
b16fc097 | 1912 | * |
9cde0c88 QM |
1913 | * ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0); |
1914 | * if (ret < 0) | |
1915 | * return TC_ACT_SHOT; // drop packet | |
b16fc097 | 1916 | * |
9cde0c88 QM |
1917 | * if (key.remote_ipv4 != 0x0a000001) |
1918 | * return TC_ACT_SHOT; // drop packet | |
b16fc097 | 1919 | * |
9cde0c88 QM |
1920 | * return TC_ACT_OK; // accept packet |
1921 | * | |
1922 | * This interface can also be used with all encapsulation devices | |
1923 | * that can operate in "collect metadata" mode: instead of having | |
1924 | * one network device per specific configuration, the "collect | |
1925 | * metadata" mode only requires a single device where the | |
1926 | * configuration can be extracted from this helper. | |
1927 | * | |
1928 | * This can be used together with various tunnels such as VXLan, | |
1929 | * Geneve, GRE or IP in IP (IPIP). | |
1930 | * Return | |
1931 | * 0 on success, or a negative error in case of failure. | |
1932 | * | |
bdb7b79b | 1933 | * long bpf_skb_set_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) |
9cde0c88 QM |
1934 | * Description |
1935 | * Populate tunnel metadata for packet associated to *skb.* The | |
1936 | * tunnel metadata is set to the contents of *key*, of *size*. The | |
1937 | * *flags* can be set to a combination of the following values: | |
1938 | * | |
1939 | * **BPF_F_TUNINFO_IPV6** | |
1940 | * Indicate that the tunnel is based on IPv6 protocol | |
1941 | * instead of IPv4. | |
1942 | * **BPF_F_ZERO_CSUM_TX** | |
1943 | * For IPv4 packets, add a flag to tunnel metadata | |
1944 | * indicating that checksum computation should be skipped | |
1945 | * and checksum set to zeroes. | |
1946 | * **BPF_F_DONT_FRAGMENT** | |
1947 | * Add a flag to tunnel metadata indicating that the | |
1948 | * packet should not be fragmented. | |
1949 | * **BPF_F_SEQ_NUMBER** | |
1950 | * Add a flag to tunnel metadata indicating that a | |
1951 | * sequence number should be added to tunnel header before | |
1952 | * sending the packet. This flag was added for GRE | |
1953 | * encapsulation, but might be used with other protocols | |
1954 | * as well in the future. | |
1955 | * | |
1956 | * Here is a typical usage on the transmit path: | |
1957 | * | |
1958 | * :: | |
1959 | * | |
1960 | * struct bpf_tunnel_key key; | |
1961 | * populate key ... | |
1962 | * bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0); | |
1963 | * bpf_clone_redirect(skb, vxlan_dev_ifindex, 0); | |
1964 | * | |
1965 | * See also the description of the **bpf_skb_get_tunnel_key**\ () | |
1966 | * helper for additional information. | |
1967 | * Return | |
1968 | * 0 on success, or a negative error in case of failure. | |
1969 | * | |
1970 | * u64 bpf_perf_event_read(struct bpf_map *map, u64 flags) | |
1971 | * Description | |
1972 | * Read the value of a perf event counter. This helper relies on a | |
1973 | * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of | |
1974 | * the perf event counter is selected when *map* is updated with | |
1975 | * perf event file descriptors. The *map* is an array whose size | |
1976 | * is the number of available CPUs, and each cell contains a value | |
1977 | * relative to one CPU. The value to retrieve is indicated by | |
1978 | * *flags*, that contains the index of the CPU to look up, masked | |
1979 | * with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to | |
1980 | * **BPF_F_CURRENT_CPU** to indicate that the value for the | |
1981 | * current CPU should be retrieved. | |
1982 | * | |
1983 | * Note that before Linux 4.13, only hardware perf event can be | |
1984 | * retrieved. | |
1985 | * | |
1986 | * Also, be aware that the newer helper | |
1987 | * **bpf_perf_event_read_value**\ () is recommended over | |
a56497d3 | 1988 | * **bpf_perf_event_read**\ () in general. The latter has some ABI |
9cde0c88 QM |
1989 | * quirks where error and counter value are used as a return code |
1990 | * (which is wrong to do since ranges may overlap). This issue is | |
a56497d3 QM |
1991 | * fixed with **bpf_perf_event_read_value**\ (), which at the same |
1992 | * time provides more features over the **bpf_perf_event_read**\ | |
1993 | * () interface. Please refer to the description of | |
9cde0c88 QM |
1994 | * **bpf_perf_event_read_value**\ () for details. |
1995 | * Return | |
1996 | * The value of the perf event counter read from the map, or a | |
1997 | * negative error code in case of failure. | |
1998 | * | |
bdb7b79b | 1999 | * long bpf_redirect(u32 ifindex, u64 flags) |
9cde0c88 QM |
2000 | * Description |
2001 | * Redirect the packet to another net device of index *ifindex*. | |
2002 | * This helper is somewhat similar to **bpf_clone_redirect**\ | |
2003 | * (), except that the packet is not cloned, which provides | |
2004 | * increased performance. | |
2005 | * | |
2006 | * Except for XDP, both ingress and egress interfaces can be used | |
2007 | * for redirection. The **BPF_F_INGRESS** value in *flags* is used | |
2008 | * to make the distinction (ingress path is selected if the flag | |
2009 | * is present, egress path otherwise). Currently, XDP only | |
2010 | * supports redirection to the egress interface, and accepts no | |
2011 | * flag at all. | |
2012 | * | |
f25975f4 THJ |
2013 | * The same effect can also be attained with the more generic |
2014 | * **bpf_redirect_map**\ (), which uses a BPF map to store the | |
2015 | * redirect target instead of providing it directly to the helper. | |
9cde0c88 QM |
2016 | * Return |
2017 | * For XDP, the helper returns **XDP_REDIRECT** on success or | |
2018 | * **XDP_ABORTED** on error. For other program types, the values | |
2019 | * are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on | |
2020 | * error. | |
2021 | * | |
2022 | * u32 bpf_get_route_realm(struct sk_buff *skb) | |
2023 | * Description | |
2024 | * Retrieve the realm or the route, that is to say the | |
2025 | * **tclassid** field of the destination for the *skb*. The | |
b16fc097 | 2026 | * identifier retrieved is a user-provided tag, similar to the |
9cde0c88 QM |
2027 | * one used with the net_cls cgroup (see description for |
2028 | * **bpf_get_cgroup_classid**\ () helper), but here this tag is | |
2029 | * held by a route (a destination entry), not by a task. | |
2030 | * | |
2031 | * Retrieving this identifier works with the clsact TC egress hook | |
2032 | * (see also **tc-bpf(8)**), or alternatively on conventional | |
2033 | * classful egress qdiscs, but not on TC ingress path. In case of | |
2034 | * clsact TC egress hook, this has the advantage that, internally, | |
2035 | * the destination entry has not been dropped yet in the transmit | |
2036 | * path. Therefore, the destination entry does not need to be | |
2037 | * artificially held via **netif_keep_dst**\ () for a classful | |
2038 | * qdisc until the *skb* is freed. | |
2039 | * | |
2040 | * This helper is available only if the kernel was compiled with | |
2041 | * **CONFIG_IP_ROUTE_CLASSID** configuration option. | |
2042 | * Return | |
2043 | * The realm of the route for the packet associated to *skb*, or 0 | |
2044 | * if none was found. | |
2045 | * | |
bdb7b79b | 2046 | * long bpf_perf_event_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) |
9cde0c88 QM |
2047 | * Description |
2048 | * Write raw *data* blob into a special BPF perf event held by | |
2049 | * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf | |
2050 | * event must have the following attributes: **PERF_SAMPLE_RAW** | |
2051 | * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and | |
2052 | * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. | |
2053 | * | |
2054 | * The *flags* are used to indicate the index in *map* for which | |
2055 | * the value must be put, masked with **BPF_F_INDEX_MASK**. | |
2056 | * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** | |
2057 | * to indicate that the index of the current CPU core should be | |
2058 | * used. | |
2059 | * | |
2060 | * The value to write, of *size*, is passed through eBPF stack and | |
2061 | * pointed by *data*. | |
2062 | * | |
2063 | * The context of the program *ctx* needs also be passed to the | |
2064 | * helper. | |
2065 | * | |
2066 | * On user space, a program willing to read the values needs to | |
2067 | * call **perf_event_open**\ () on the perf event (either for | |
2068 | * one or for all CPUs) and to store the file descriptor into the | |
2069 | * *map*. This must be done before the eBPF program can send data | |
2070 | * into it. An example is available in file | |
2071 | * *samples/bpf/trace_output_user.c* in the Linux kernel source | |
2072 | * tree (the eBPF program counterpart is in | |
2073 | * *samples/bpf/trace_output_kern.c*). | |
2074 | * | |
2075 | * **bpf_perf_event_output**\ () achieves better performance | |
2076 | * than **bpf_trace_printk**\ () for sharing data with user | |
2077 | * space, and is much better suitable for streaming data from eBPF | |
2078 | * programs. | |
2079 | * | |
2080 | * Note that this helper is not restricted to tracing use cases | |
2081 | * and can be used with programs attached to TC or XDP as well, | |
2082 | * where it allows for passing data to user space listeners. Data | |
2083 | * can be: | |
2084 | * | |
2085 | * * Only custom structs, | |
2086 | * * Only the packet payload, or | |
2087 | * * A combination of both. | |
2088 | * Return | |
2089 | * 0 on success, or a negative error in case of failure. | |
2090 | * | |
bdb7b79b | 2091 | * long bpf_skb_load_bytes(const void *skb, u32 offset, void *to, u32 len) |
9cde0c88 QM |
2092 | * Description |
2093 | * This helper was provided as an easy way to load data from a | |
2094 | * packet. It can be used to load *len* bytes from *offset* from | |
2095 | * the packet associated to *skb*, into the buffer pointed by | |
2096 | * *to*. | |
2097 | * | |
2098 | * Since Linux 4.7, usage of this helper has mostly been replaced | |
2099 | * by "direct packet access", enabling packet data to be | |
2100 | * manipulated with *skb*\ **->data** and *skb*\ **->data_end** | |
2101 | * pointing respectively to the first byte of packet data and to | |
2102 | * the byte after the last byte of packet data. However, it | |
2103 | * remains useful if one wishes to read large quantities of data | |
2104 | * at once from a packet into the eBPF stack. | |
2105 | * Return | |
2106 | * 0 on success, or a negative error in case of failure. | |
2107 | * | |
bdb7b79b | 2108 | * long bpf_get_stackid(void *ctx, struct bpf_map *map, u64 flags) |
9cde0c88 QM |
2109 | * Description |
2110 | * Walk a user or a kernel stack and return its id. To achieve | |
2111 | * this, the helper needs *ctx*, which is a pointer to the context | |
2112 | * on which the tracing program is executed, and a pointer to a | |
2113 | * *map* of type **BPF_MAP_TYPE_STACK_TRACE**. | |
2114 | * | |
2115 | * The last argument, *flags*, holds the number of stack frames to | |
2116 | * skip (from 0 to 255), masked with | |
2117 | * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set | |
2118 | * a combination of the following flags: | |
2119 | * | |
2120 | * **BPF_F_USER_STACK** | |
2121 | * Collect a user space stack instead of a kernel stack. | |
2122 | * **BPF_F_FAST_STACK_CMP** | |
2123 | * Compare stacks by hash only. | |
2124 | * **BPF_F_REUSE_STACKID** | |
2125 | * If two different stacks hash into the same *stackid*, | |
2126 | * discard the old one. | |
2127 | * | |
2128 | * The stack id retrieved is a 32 bit long integer handle which | |
2129 | * can be further combined with other data (including other stack | |
2130 | * ids) and used as a key into maps. This can be useful for | |
2131 | * generating a variety of graphs (such as flame graphs or off-cpu | |
2132 | * graphs). | |
2133 | * | |
2134 | * For walking a stack, this helper is an improvement over | |
2135 | * **bpf_probe_read**\ (), which can be used with unrolled loops | |
2136 | * but is not efficient and consumes a lot of eBPF instructions. | |
2137 | * Instead, **bpf_get_stackid**\ () can collect up to | |
2138 | * **PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that | |
2139 | * this limit can be controlled with the **sysctl** program, and | |
2140 | * that it should be manually increased in order to profile long | |
2141 | * user stacks (such as stacks for Java programs). To do so, use: | |
2142 | * | |
2143 | * :: | |
2144 | * | |
2145 | * # sysctl kernel.perf_event_max_stack=<new value> | |
9cde0c88 QM |
2146 | * Return |
2147 | * The positive or null stack id on success, or a negative error | |
2148 | * in case of failure. | |
2149 | * | |
2150 | * s64 bpf_csum_diff(__be32 *from, u32 from_size, __be32 *to, u32 to_size, __wsum seed) | |
2151 | * Description | |
2152 | * Compute a checksum difference, from the raw buffer pointed by | |
2153 | * *from*, of length *from_size* (that must be a multiple of 4), | |
2154 | * towards the raw buffer pointed by *to*, of size *to_size* | |
2155 | * (same remark). An optional *seed* can be added to the value | |
2156 | * (this can be cascaded, the seed may come from a previous call | |
2157 | * to the helper). | |
2158 | * | |
2159 | * This is flexible enough to be used in several ways: | |
2160 | * | |
2161 | * * With *from_size* == 0, *to_size* > 0 and *seed* set to | |
2162 | * checksum, it can be used when pushing new data. | |
2163 | * * With *from_size* > 0, *to_size* == 0 and *seed* set to | |
2164 | * checksum, it can be used when removing data from a packet. | |
2165 | * * With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it | |
2166 | * can be used to compute a diff. Note that *from_size* and | |
2167 | * *to_size* do not need to be equal. | |
2168 | * | |
2169 | * This helper can be used in combination with | |
2170 | * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to | |
2171 | * which one can feed in the difference computed with | |
2172 | * **bpf_csum_diff**\ (). | |
2173 | * Return | |
2174 | * The checksum result, or a negative error code in case of | |
2175 | * failure. | |
2176 | * | |
bdb7b79b | 2177 | * long bpf_skb_get_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) |
9cde0c88 QM |
2178 | * Description |
2179 | * Retrieve tunnel options metadata for the packet associated to | |
2180 | * *skb*, and store the raw tunnel option data to the buffer *opt* | |
2181 | * of *size*. | |
2182 | * | |
2183 | * This helper can be used with encapsulation devices that can | |
2184 | * operate in "collect metadata" mode (please refer to the related | |
2185 | * note in the description of **bpf_skb_get_tunnel_key**\ () for | |
2186 | * more details). A particular example where this can be used is | |
2187 | * in combination with the Geneve encapsulation protocol, where it | |
2188 | * allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper) | |
2189 | * and retrieving arbitrary TLVs (Type-Length-Value headers) from | |
2190 | * the eBPF program. This allows for full customization of these | |
2191 | * headers. | |
2192 | * Return | |
2193 | * The size of the option data retrieved. | |
2194 | * | |
bdb7b79b | 2195 | * long bpf_skb_set_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) |
9cde0c88 QM |
2196 | * Description |
2197 | * Set tunnel options metadata for the packet associated to *skb* | |
2198 | * to the option data contained in the raw buffer *opt* of *size*. | |
2199 | * | |
2200 | * See also the description of the **bpf_skb_get_tunnel_opt**\ () | |
2201 | * helper for additional information. | |
2202 | * Return | |
2203 | * 0 on success, or a negative error in case of failure. | |
2204 | * | |
bdb7b79b | 2205 | * long bpf_skb_change_proto(struct sk_buff *skb, __be16 proto, u64 flags) |
9cde0c88 QM |
2206 | * Description |
2207 | * Change the protocol of the *skb* to *proto*. Currently | |
2208 | * supported are transition from IPv4 to IPv6, and from IPv6 to | |
2209 | * IPv4. The helper takes care of the groundwork for the | |
2210 | * transition, including resizing the socket buffer. The eBPF | |
2211 | * program is expected to fill the new headers, if any, via | |
2212 | * **skb_store_bytes**\ () and to recompute the checksums with | |
2213 | * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ | |
2214 | * (). The main case for this helper is to perform NAT64 | |
2215 | * operations out of an eBPF program. | |
2216 | * | |
2217 | * Internally, the GSO type is marked as dodgy so that headers are | |
2218 | * checked and segments are recalculated by the GSO/GRO engine. | |
2219 | * The size for GSO target is adapted as well. | |
2220 | * | |
2221 | * All values for *flags* are reserved for future usage, and must | |
2222 | * be left at zero. | |
2223 | * | |
c1fe1e70 | 2224 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
2225 | * packet buffer. Therefore, at load time, all checks on pointers |
2226 | * previously done by the verifier are invalidated and must be | |
2227 | * performed again, if the helper is used in combination with | |
2228 | * direct packet access. | |
2229 | * Return | |
2230 | * 0 on success, or a negative error in case of failure. | |
2231 | * | |
bdb7b79b | 2232 | * long bpf_skb_change_type(struct sk_buff *skb, u32 type) |
9cde0c88 QM |
2233 | * Description |
2234 | * Change the packet type for the packet associated to *skb*. This | |
2235 | * comes down to setting *skb*\ **->pkt_type** to *type*, except | |
2236 | * the eBPF program does not have a write access to *skb*\ | |
2237 | * **->pkt_type** beside this helper. Using a helper here allows | |
2238 | * for graceful handling of errors. | |
2239 | * | |
2240 | * The major use case is to change incoming *skb*s to | |
2241 | * **PACKET_HOST** in a programmatic way instead of having to | |
2242 | * recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for | |
2243 | * example. | |
2244 | * | |
2245 | * Note that *type* only allows certain values. At this time, they | |
2246 | * are: | |
2247 | * | |
2248 | * **PACKET_HOST** | |
2249 | * Packet is for us. | |
2250 | * **PACKET_BROADCAST** | |
2251 | * Send packet to all. | |
2252 | * **PACKET_MULTICAST** | |
2253 | * Send packet to group. | |
2254 | * **PACKET_OTHERHOST** | |
2255 | * Send packet to someone else. | |
2256 | * Return | |
2257 | * 0 on success, or a negative error in case of failure. | |
2258 | * | |
bdb7b79b | 2259 | * long bpf_skb_under_cgroup(struct sk_buff *skb, struct bpf_map *map, u32 index) |
9cde0c88 QM |
2260 | * Description |
2261 | * Check whether *skb* is a descendant of the cgroup2 held by | |
2262 | * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. | |
2263 | * Return | |
2264 | * The return value depends on the result of the test, and can be: | |
2265 | * | |
2266 | * * 0, if the *skb* failed the cgroup2 descendant test. | |
2267 | * * 1, if the *skb* succeeded the cgroup2 descendant test. | |
2268 | * * A negative error code, if an error occurred. | |
2269 | * | |
2270 | * u32 bpf_get_hash_recalc(struct sk_buff *skb) | |
2271 | * Description | |
2272 | * Retrieve the hash of the packet, *skb*\ **->hash**. If it is | |
2273 | * not set, in particular if the hash was cleared due to mangling, | |
2274 | * recompute this hash. Later accesses to the hash can be done | |
2275 | * directly with *skb*\ **->hash**. | |
2276 | * | |
2277 | * Calling **bpf_set_hash_invalid**\ (), changing a packet | |
2278 | * prototype with **bpf_skb_change_proto**\ (), or calling | |
2279 | * **bpf_skb_store_bytes**\ () with the | |
2280 | * **BPF_F_INVALIDATE_HASH** are actions susceptible to clear | |
2281 | * the hash and to trigger a new computation for the next call to | |
2282 | * **bpf_get_hash_recalc**\ (). | |
2283 | * Return | |
2284 | * The 32-bit hash. | |
0cb34dc2 JS |
2285 | * |
2286 | * u64 bpf_get_current_task(void) | |
e40fbbf0 UA |
2287 | * Description |
2288 | * Get the current task. | |
9cde0c88 QM |
2289 | * Return |
2290 | * A pointer to the current task struct. | |
2291 | * | |
bdb7b79b | 2292 | * long bpf_probe_write_user(void *dst, const void *src, u32 len) |
9cde0c88 QM |
2293 | * Description |
2294 | * Attempt in a safe way to write *len* bytes from the buffer | |
2295 | * *src* to *dst* in memory. It only works for threads that are in | |
2296 | * user context, and *dst* must be a valid user space address. | |
2297 | * | |
2298 | * This helper should not be used to implement any kind of | |
2299 | * security mechanism because of TOC-TOU attacks, but rather to | |
2300 | * debug, divert, and manipulate execution of semi-cooperative | |
2301 | * processes. | |
2302 | * | |
2303 | * Keep in mind that this feature is meant for experiments, and it | |
2304 | * has a risk of crashing the system and running programs. | |
2305 | * Therefore, when an eBPF program using this helper is attached, | |
2306 | * a warning including PID and process name is printed to kernel | |
2307 | * logs. | |
2308 | * Return | |
2309 | * 0 on success, or a negative error in case of failure. | |
2310 | * | |
bdb7b79b | 2311 | * long bpf_current_task_under_cgroup(struct bpf_map *map, u32 index) |
9cde0c88 QM |
2312 | * Description |
2313 | * Check whether the probe is being run is the context of a given | |
2314 | * subset of the cgroup2 hierarchy. The cgroup2 to test is held by | |
2315 | * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. | |
2316 | * Return | |
2317 | * The return value depends on the result of the test, and can be: | |
2318 | * | |
58617014 HC |
2319 | * * 1, if current task belongs to the cgroup2. |
2320 | * * 0, if current task does not belong to the cgroup2. | |
9cde0c88 QM |
2321 | * * A negative error code, if an error occurred. |
2322 | * | |
bdb7b79b | 2323 | * long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags) |
9cde0c88 QM |
2324 | * Description |
2325 | * Resize (trim or grow) the packet associated to *skb* to the | |
2326 | * new *len*. The *flags* are reserved for future usage, and must | |
2327 | * be left at zero. | |
2328 | * | |
2329 | * The basic idea is that the helper performs the needed work to | |
2330 | * change the size of the packet, then the eBPF program rewrites | |
2331 | * the rest via helpers like **bpf_skb_store_bytes**\ (), | |
2332 | * **bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ () | |
2333 | * and others. This helper is a slow path utility intended for | |
2334 | * replies with control messages. And because it is targeted for | |
2335 | * slow path, the helper itself can afford to be slow: it | |
2336 | * implicitly linearizes, unclones and drops offloads from the | |
2337 | * *skb*. | |
2338 | * | |
c1fe1e70 | 2339 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
2340 | * packet buffer. Therefore, at load time, all checks on pointers |
2341 | * previously done by the verifier are invalidated and must be | |
2342 | * performed again, if the helper is used in combination with | |
2343 | * direct packet access. | |
2344 | * Return | |
2345 | * 0 on success, or a negative error in case of failure. | |
2346 | * | |
bdb7b79b | 2347 | * long bpf_skb_pull_data(struct sk_buff *skb, u32 len) |
9cde0c88 QM |
2348 | * Description |
2349 | * Pull in non-linear data in case the *skb* is non-linear and not | |
2350 | * all of *len* are part of the linear section. Make *len* bytes | |
2351 | * from *skb* readable and writable. If a zero value is passed for | |
2352 | * *len*, then the whole length of the *skb* is pulled. | |
2353 | * | |
2354 | * This helper is only needed for reading and writing with direct | |
2355 | * packet access. | |
2356 | * | |
2357 | * For direct packet access, testing that offsets to access | |
2358 | * are within packet boundaries (test on *skb*\ **->data_end**) is | |
2359 | * susceptible to fail if offsets are invalid, or if the requested | |
2360 | * data is in non-linear parts of the *skb*. On failure the | |
2361 | * program can just bail out, or in the case of a non-linear | |
2362 | * buffer, use a helper to make the data available. The | |
2363 | * **bpf_skb_load_bytes**\ () helper is a first solution to access | |
2364 | * the data. Another one consists in using **bpf_skb_pull_data** | |
2365 | * to pull in once the non-linear parts, then retesting and | |
2366 | * eventually access the data. | |
2367 | * | |
2368 | * At the same time, this also makes sure the *skb* is uncloned, | |
2369 | * which is a necessary condition for direct write. As this needs | |
2370 | * to be an invariant for the write part only, the verifier | |
2371 | * detects writes and adds a prologue that is calling | |
2372 | * **bpf_skb_pull_data()** to effectively unclone the *skb* from | |
2373 | * the very beginning in case it is indeed cloned. | |
2374 | * | |
c1fe1e70 | 2375 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
2376 | * packet buffer. Therefore, at load time, all checks on pointers |
2377 | * previously done by the verifier are invalidated and must be | |
2378 | * performed again, if the helper is used in combination with | |
2379 | * direct packet access. | |
2380 | * Return | |
2381 | * 0 on success, or a negative error in case of failure. | |
2382 | * | |
2383 | * s64 bpf_csum_update(struct sk_buff *skb, __wsum csum) | |
2384 | * Description | |
2385 | * Add the checksum *csum* into *skb*\ **->csum** in case the | |
2386 | * driver has supplied a checksum for the entire packet into that | |
2387 | * field. Return an error otherwise. This helper is intended to be | |
2388 | * used in combination with **bpf_csum_diff**\ (), in particular | |
2389 | * when the checksum needs to be updated after data has been | |
2390 | * written into the packet through direct packet access. | |
2391 | * Return | |
2392 | * The checksum on success, or a negative error code in case of | |
2393 | * failure. | |
2394 | * | |
2395 | * void bpf_set_hash_invalid(struct sk_buff *skb) | |
2396 | * Description | |
2397 | * Invalidate the current *skb*\ **->hash**. It can be used after | |
2398 | * mangling on headers through direct packet access, in order to | |
2399 | * indicate that the hash is outdated and to trigger a | |
2400 | * recalculation the next time the kernel tries to access this | |
2401 | * hash or when the **bpf_get_hash_recalc**\ () helper is called. | |
e40fbbf0 UA |
2402 | * Return |
2403 | * void. | |
9cde0c88 | 2404 | * |
bdb7b79b | 2405 | * long bpf_get_numa_node_id(void) |
9cde0c88 QM |
2406 | * Description |
2407 | * Return the id of the current NUMA node. The primary use case | |
2408 | * for this helper is the selection of sockets for the local NUMA | |
2409 | * node, when the program is attached to sockets using the | |
2410 | * **SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**), | |
2411 | * but the helper is also available to other eBPF program types, | |
2412 | * similarly to **bpf_get_smp_processor_id**\ (). | |
2413 | * Return | |
2414 | * The id of current NUMA node. | |
2415 | * | |
bdb7b79b | 2416 | * long bpf_skb_change_head(struct sk_buff *skb, u32 len, u64 flags) |
9cde0c88 QM |
2417 | * Description |
2418 | * Grows headroom of packet associated to *skb* and adjusts the | |
2419 | * offset of the MAC header accordingly, adding *len* bytes of | |
2420 | * space. It automatically extends and reallocates memory as | |
2421 | * required. | |
2422 | * | |
2423 | * This helper can be used on a layer 3 *skb* to push a MAC header | |
2424 | * for redirection into a layer 2 device. | |
2425 | * | |
2426 | * All values for *flags* are reserved for future usage, and must | |
2427 | * be left at zero. | |
2428 | * | |
c1fe1e70 | 2429 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
2430 | * packet buffer. Therefore, at load time, all checks on pointers |
2431 | * previously done by the verifier are invalidated and must be | |
2432 | * performed again, if the helper is used in combination with | |
2433 | * direct packet access. | |
2434 | * Return | |
2435 | * 0 on success, or a negative error in case of failure. | |
2436 | * | |
bdb7b79b | 2437 | * long bpf_xdp_adjust_head(struct xdp_buff *xdp_md, int delta) |
9cde0c88 QM |
2438 | * Description |
2439 | * Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that | |
2440 | * it is possible to use a negative value for *delta*. This helper | |
2441 | * can be used to prepare the packet for pushing or popping | |
2442 | * headers. | |
2443 | * | |
c1fe1e70 | 2444 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
2445 | * packet buffer. Therefore, at load time, all checks on pointers |
2446 | * previously done by the verifier are invalidated and must be | |
2447 | * performed again, if the helper is used in combination with | |
2448 | * direct packet access. | |
2449 | * Return | |
2450 | * 0 on success, or a negative error in case of failure. | |
9a738266 | 2451 | * |
bdb7b79b | 2452 | * long bpf_probe_read_str(void *dst, u32 size, const void *unsafe_ptr) |
9cde0c88 | 2453 | * Description |
6ae08ae3 | 2454 | * Copy a NUL terminated string from an unsafe kernel address |
ff20460e | 2455 | * *unsafe_ptr* to *dst*. See **bpf_probe_read_kernel_str**\ () for |
6ae08ae3 | 2456 | * more details. |
9cde0c88 | 2457 | * |
ff20460e QM |
2458 | * Generally, use **bpf_probe_read_user_str**\ () or |
2459 | * **bpf_probe_read_kernel_str**\ () instead. | |
9cde0c88 QM |
2460 | * Return |
2461 | * On success, the strictly positive length of the string, | |
2462 | * including the trailing NUL character. On error, a negative | |
2463 | * value. | |
2464 | * | |
2465 | * u64 bpf_get_socket_cookie(struct sk_buff *skb) | |
2466 | * Description | |
2467 | * If the **struct sk_buff** pointed by *skb* has a known socket, | |
2468 | * retrieve the cookie (generated by the kernel) of this socket. | |
2469 | * If no cookie has been set yet, generate a new cookie. Once | |
2470 | * generated, the socket cookie remains stable for the life of the | |
2471 | * socket. This helper can be useful for monitoring per socket | |
609a2ca5 DB |
2472 | * networking traffic statistics as it provides a global socket |
2473 | * identifier that can be assumed unique. | |
9cde0c88 | 2474 | * Return |
07881ccb FR |
2475 | * A 8-byte long unique number on success, or 0 if the socket |
2476 | * field is missing inside *skb*. | |
9cde0c88 | 2477 | * |
a40b712e AI |
2478 | * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx) |
2479 | * Description | |
2480 | * Equivalent to bpf_get_socket_cookie() helper that accepts | |
ea6eced0 | 2481 | * *skb*, but gets socket from **struct bpf_sock_addr** context. |
a40b712e | 2482 | * Return |
07881ccb | 2483 | * A 8-byte long unique number. |
a40b712e AI |
2484 | * |
2485 | * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx) | |
2486 | * Description | |
ff20460e | 2487 | * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts |
ea6eced0 | 2488 | * *skb*, but gets socket from **struct bpf_sock_ops** context. |
a40b712e | 2489 | * Return |
07881ccb | 2490 | * A 8-byte long unique number. |
a40b712e | 2491 | * |
c5dbb89f FR |
2492 | * u64 bpf_get_socket_cookie(struct sock *sk) |
2493 | * Description | |
2494 | * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts | |
2495 | * *sk*, but gets socket from a BTF **struct sock**. This helper | |
2496 | * also works for sleepable programs. | |
2497 | * Return | |
2498 | * A 8-byte long unique number or 0 if *sk* is NULL. | |
2499 | * | |
9cde0c88 | 2500 | * u32 bpf_get_socket_uid(struct sk_buff *skb) |
e40fbbf0 UA |
2501 | * Description |
2502 | * Get the owner UID of the socked associated to *skb*. | |
9cde0c88 QM |
2503 | * Return |
2504 | * The owner UID of the socket associated to *skb*. If the socket | |
2505 | * is **NULL**, or if it is not a full socket (i.e. if it is a | |
2506 | * time-wait or a request socket instead), **overflowuid** value | |
2507 | * is returned (note that **overflowuid** might also be the actual | |
2508 | * UID value for the socket). | |
2509 | * | |
bdb7b79b | 2510 | * long bpf_set_hash(struct sk_buff *skb, u32 hash) |
9cde0c88 QM |
2511 | * Description |
2512 | * Set the full hash for *skb* (set the field *skb*\ **->hash**) | |
2513 | * to value *hash*. | |
2514 | * Return | |
2515 | * 0 | |
2516 | * | |
bdb7b79b | 2517 | * long bpf_setsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) |
9cde0c88 QM |
2518 | * Description |
2519 | * Emulate a call to **setsockopt()** on the socket associated to | |
2520 | * *bpf_socket*, which must be a full socket. The *level* at | |
2521 | * which the option resides and the name *optname* of the option | |
2522 | * must be specified, see **setsockopt(2)** for more information. | |
2523 | * The option value of length *optlen* is pointed by *optval*. | |
2524 | * | |
beecf11b | 2525 | * *bpf_socket* should be one of the following: |
ff20460e | 2526 | * |
beecf11b SF |
2527 | * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. |
2528 | * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT** | |
2529 | * and **BPF_CGROUP_INET6_CONNECT**. | |
2530 | * | |
9cde0c88 QM |
2531 | * This helper actually implements a subset of **setsockopt()**. |
2532 | * It supports the following *level*\ s: | |
2533 | * | |
2534 | * * **SOL_SOCKET**, which supports the following *optname*\ s: | |
2535 | * **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**, | |
f9bcf968 DY |
2536 | * **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**, |
2537 | * **SO_BINDTODEVICE**, **SO_KEEPALIVE**. | |
9cde0c88 QM |
2538 | * * **IPPROTO_TCP**, which supports the following *optname*\ s: |
2539 | * **TCP_CONGESTION**, **TCP_BPF_IW**, | |
f9bcf968 DY |
2540 | * **TCP_BPF_SNDCWND_CLAMP**, **TCP_SAVE_SYN**, |
2541 | * **TCP_KEEPIDLE**, **TCP_KEEPINTVL**, **TCP_KEEPCNT**, | |
eca43ee6 | 2542 | * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**. |
9cde0c88 QM |
2543 | * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. |
2544 | * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**. | |
2545 | * Return | |
2546 | * 0 on success, or a negative error in case of failure. | |
2547 | * | |
bdb7b79b | 2548 | * long bpf_skb_adjust_room(struct sk_buff *skb, s32 len_diff, u32 mode, u64 flags) |
9cde0c88 QM |
2549 | * Description |
2550 | * Grow or shrink the room for data in the packet associated to | |
2551 | * *skb* by *len_diff*, and according to the selected *mode*. | |
2552 | * | |
836e66c2 DB |
2553 | * By default, the helper will reset any offloaded checksum |
2554 | * indicator of the skb to CHECKSUM_NONE. This can be avoided | |
2555 | * by the following flag: | |
2556 | * | |
2557 | * * **BPF_F_ADJ_ROOM_NO_CSUM_RESET**: Do not reset offloaded | |
2558 | * checksum data of the skb to CHECKSUM_NONE. | |
2559 | * | |
6c408dec WB |
2560 | * There are two supported modes at this time: |
2561 | * | |
2562 | * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer | |
2563 | * (room space is added or removed below the layer 2 header). | |
9cde0c88 QM |
2564 | * |
2565 | * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer | |
2566 | * (room space is added or removed below the layer 3 header). | |
2567 | * | |
6c408dec WB |
2568 | * The following flags are supported at this time: |
2569 | * | |
2570 | * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size. | |
2571 | * Adjusting mss in this way is not allowed for datagrams. | |
2572 | * | |
c1fe1e70 QM |
2573 | * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**, |
2574 | * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**: | |
6c408dec WB |
2575 | * Any new space is reserved to hold a tunnel header. |
2576 | * Configure skb offsets and other fields accordingly. | |
2577 | * | |
c1fe1e70 QM |
2578 | * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**, |
2579 | * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**: | |
6c408dec | 2580 | * Use with ENCAP_L3 flags to further specify the tunnel type. |
9cde0c88 | 2581 | * |
c1fe1e70 | 2582 | * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*): |
1db04c30 | 2583 | * Use with ENCAP_L3/L4 flags to further specify the tunnel |
c1fe1e70 | 2584 | * type; *len* is the length of the inner MAC header. |
1db04c30 | 2585 | * |
d01b59c9 XH |
2586 | * * **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**: |
2587 | * Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the | |
2588 | * L2 type as Ethernet. | |
2589 | * | |
c1fe1e70 | 2590 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
2591 | * packet buffer. Therefore, at load time, all checks on pointers |
2592 | * previously done by the verifier are invalidated and must be | |
2593 | * performed again, if the helper is used in combination with | |
2594 | * direct packet access. | |
2595 | * Return | |
2596 | * 0 on success, or a negative error in case of failure. | |
2597 | * | |
bdb7b79b | 2598 | * long bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags) |
9cde0c88 QM |
2599 | * Description |
2600 | * Redirect the packet to the endpoint referenced by *map* at | |
2601 | * index *key*. Depending on its type, this *map* can contain | |
2602 | * references to net devices (for forwarding packets through other | |
2603 | * ports), or to CPUs (for redirecting XDP frames to another CPU; | |
2604 | * but this is only implemented for native XDP (with driver | |
2605 | * support) as of this writing). | |
2606 | * | |
3745ee18 PP |
2607 | * The lower two bits of *flags* are used as the return code if |
2608 | * the map lookup fails. This is so that the return value can be | |
ff20460e | 2609 | * one of the XDP program return codes up to **XDP_TX**, as chosen |
e624d4ed HL |
2610 | * by the caller. The higher bits of *flags* can be set to |
2611 | * BPF_F_BROADCAST or BPF_F_EXCLUDE_INGRESS as defined below. | |
2612 | * | |
2613 | * With BPF_F_BROADCAST the packet will be broadcasted to all the | |
2614 | * interfaces in the map, with BPF_F_EXCLUDE_INGRESS the ingress | |
2615 | * interface will be excluded when do broadcasting. | |
9cde0c88 | 2616 | * |
ff20460e QM |
2617 | * See also **bpf_redirect**\ (), which only supports redirecting |
2618 | * to an ifindex, but doesn't require a map to do so. | |
9cde0c88 | 2619 | * Return |
f25975f4 | 2620 | * **XDP_REDIRECT** on success, or the value of the two lower bits |
a33d3147 | 2621 | * of the *flags* argument on error. |
9cde0c88 | 2622 | * |
bdb7b79b | 2623 | * long bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags) |
9cde0c88 QM |
2624 | * Description |
2625 | * Redirect the packet to the socket referenced by *map* (of type | |
2626 | * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and | |
2627 | * egress interfaces can be used for redirection. The | |
2628 | * **BPF_F_INGRESS** value in *flags* is used to make the | |
2629 | * distinction (ingress path is selected if the flag is present, | |
2630 | * egress path otherwise). This is the only flag supported for now. | |
2631 | * Return | |
2632 | * **SK_PASS** on success, or **SK_DROP** on error. | |
2633 | * | |
bdb7b79b | 2634 | * long bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) |
9cde0c88 QM |
2635 | * Description |
2636 | * Add an entry to, or update a *map* referencing sockets. The | |
2637 | * *skops* is used as a new value for the entry associated to | |
2638 | * *key*. *flags* is one of: | |
2639 | * | |
2640 | * **BPF_NOEXIST** | |
2641 | * The entry for *key* must not exist in the map. | |
2642 | * **BPF_EXIST** | |
2643 | * The entry for *key* must already exist in the map. | |
2644 | * **BPF_ANY** | |
2645 | * No condition on the existence of the entry for *key*. | |
2646 | * | |
2647 | * If the *map* has eBPF programs (parser and verdict), those will | |
2648 | * be inherited by the socket being added. If the socket is | |
2649 | * already attached to eBPF programs, this results in an error. | |
2650 | * Return | |
2651 | * 0 on success, or a negative error in case of failure. | |
2652 | * | |
bdb7b79b | 2653 | * long bpf_xdp_adjust_meta(struct xdp_buff *xdp_md, int delta) |
9cde0c88 QM |
2654 | * Description |
2655 | * Adjust the address pointed by *xdp_md*\ **->data_meta** by | |
2656 | * *delta* (which can be positive or negative). Note that this | |
2657 | * operation modifies the address stored in *xdp_md*\ **->data**, | |
2658 | * so the latter must be loaded only after the helper has been | |
2659 | * called. | |
2660 | * | |
2661 | * The use of *xdp_md*\ **->data_meta** is optional and programs | |
2662 | * are not required to use it. The rationale is that when the | |
2663 | * packet is processed with XDP (e.g. as DoS filter), it is | |
2664 | * possible to push further meta data along with it before passing | |
2665 | * to the stack, and to give the guarantee that an ingress eBPF | |
2666 | * program attached as a TC classifier on the same device can pick | |
2667 | * this up for further post-processing. Since TC works with socket | |
2668 | * buffers, it remains possible to set from XDP the **mark** or | |
2669 | * **priority** pointers, or other pointers for the socket buffer. | |
2670 | * Having this scratch space generic and programmable allows for | |
2671 | * more flexibility as the user is free to store whatever meta | |
2672 | * data they need. | |
2673 | * | |
c1fe1e70 | 2674 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
2675 | * packet buffer. Therefore, at load time, all checks on pointers |
2676 | * previously done by the verifier are invalidated and must be | |
2677 | * performed again, if the helper is used in combination with | |
2678 | * direct packet access. | |
2679 | * Return | |
2680 | * 0 on success, or a negative error in case of failure. | |
2681 | * | |
bdb7b79b | 2682 | * long bpf_perf_event_read_value(struct bpf_map *map, u64 flags, struct bpf_perf_event_value *buf, u32 buf_size) |
9cde0c88 QM |
2683 | * Description |
2684 | * Read the value of a perf event counter, and store it into *buf* | |
2685 | * of size *buf_size*. This helper relies on a *map* of type | |
2686 | * **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event | |
2687 | * counter is selected when *map* is updated with perf event file | |
2688 | * descriptors. The *map* is an array whose size is the number of | |
2689 | * available CPUs, and each cell contains a value relative to one | |
2690 | * CPU. The value to retrieve is indicated by *flags*, that | |
2691 | * contains the index of the CPU to look up, masked with | |
2692 | * **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to | |
2693 | * **BPF_F_CURRENT_CPU** to indicate that the value for the | |
2694 | * current CPU should be retrieved. | |
2695 | * | |
2696 | * This helper behaves in a way close to | |
2697 | * **bpf_perf_event_read**\ () helper, save that instead of | |
2698 | * just returning the value observed, it fills the *buf* | |
2699 | * structure. This allows for additional data to be retrieved: in | |
2700 | * particular, the enabled and running times (in *buf*\ | |
2701 | * **->enabled** and *buf*\ **->running**, respectively) are | |
2702 | * copied. In general, **bpf_perf_event_read_value**\ () is | |
2703 | * recommended over **bpf_perf_event_read**\ (), which has some | |
2704 | * ABI issues and provides fewer functionalities. | |
2705 | * | |
2706 | * These values are interesting, because hardware PMU (Performance | |
2707 | * Monitoring Unit) counters are limited resources. When there are | |
2708 | * more PMU based perf events opened than available counters, | |
2709 | * kernel will multiplex these events so each event gets certain | |
2710 | * percentage (but not all) of the PMU time. In case that | |
2711 | * multiplexing happens, the number of samples or counter value | |
2712 | * will not reflect the case compared to when no multiplexing | |
2713 | * occurs. This makes comparison between different runs difficult. | |
2714 | * Typically, the counter value should be normalized before | |
2715 | * comparing to other experiments. The usual normalization is done | |
2716 | * as follows. | |
2717 | * | |
2718 | * :: | |
2719 | * | |
2720 | * normalized_counter = counter * t_enabled / t_running | |
2721 | * | |
2722 | * Where t_enabled is the time enabled for event and t_running is | |
2723 | * the time running for event since last normalization. The | |
2724 | * enabled and running times are accumulated since the perf event | |
2725 | * open. To achieve scaling factor between two invocations of an | |
ff20460e | 2726 | * eBPF program, users can use CPU id as the key (which is |
9cde0c88 QM |
2727 | * typical for perf array usage model) to remember the previous |
2728 | * value and do the calculation inside the eBPF program. | |
2729 | * Return | |
2730 | * 0 on success, or a negative error in case of failure. | |
2731 | * | |
bdb7b79b | 2732 | * long bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size) |
9cde0c88 QM |
2733 | * Description |
2734 | * For en eBPF program attached to a perf event, retrieve the | |
2735 | * value of the event counter associated to *ctx* and store it in | |
2736 | * the structure pointed by *buf* and of size *buf_size*. Enabled | |
2737 | * and running times are also stored in the structure (see | |
2738 | * description of helper **bpf_perf_event_read_value**\ () for | |
2739 | * more details). | |
2740 | * Return | |
2741 | * 0 on success, or a negative error in case of failure. | |
2742 | * | |
bdb7b79b | 2743 | * long bpf_getsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) |
9cde0c88 QM |
2744 | * Description |
2745 | * Emulate a call to **getsockopt()** on the socket associated to | |
2746 | * *bpf_socket*, which must be a full socket. The *level* at | |
2747 | * which the option resides and the name *optname* of the option | |
2748 | * must be specified, see **getsockopt(2)** for more information. | |
2749 | * The retrieved value is stored in the structure pointed by | |
2750 | * *opval* and of length *optlen*. | |
2751 | * | |
beecf11b | 2752 | * *bpf_socket* should be one of the following: |
ff20460e | 2753 | * |
beecf11b SF |
2754 | * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. |
2755 | * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT** | |
2756 | * and **BPF_CGROUP_INET6_CONNECT**. | |
2757 | * | |
9cde0c88 QM |
2758 | * This helper actually implements a subset of **getsockopt()**. |
2759 | * It supports the following *level*\ s: | |
2760 | * | |
2761 | * * **IPPROTO_TCP**, which supports *optname* | |
2762 | * **TCP_CONGESTION**. | |
2763 | * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. | |
2764 | * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**. | |
2765 | * Return | |
2766 | * 0 on success, or a negative error in case of failure. | |
2767 | * | |
bdb7b79b | 2768 | * long bpf_override_return(struct pt_regs *regs, u64 rc) |
9cde0c88 QM |
2769 | * Description |
2770 | * Used for error injection, this helper uses kprobes to override | |
2771 | * the return value of the probed function, and to set it to *rc*. | |
2772 | * The first argument is the context *regs* on which the kprobe | |
2773 | * works. | |
2774 | * | |
ff20460e | 2775 | * This helper works by setting the PC (program counter) |
9cde0c88 QM |
2776 | * to an override function which is run in place of the original |
2777 | * probed function. This means the probed function is not run at | |
2778 | * all. The replacement function just returns with the required | |
2779 | * value. | |
2780 | * | |
2781 | * This helper has security implications, and thus is subject to | |
2782 | * restrictions. It is only available if the kernel was compiled | |
2783 | * with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration | |
2784 | * option, and in this case it only works on functions tagged with | |
2785 | * **ALLOW_ERROR_INJECTION** in the kernel code. | |
2786 | * | |
2787 | * Also, the helper is only available for the architectures having | |
2788 | * the CONFIG_FUNCTION_ERROR_INJECTION option. As of this writing, | |
2789 | * x86 architecture is the only one to support this feature. | |
2790 | * Return | |
2791 | * 0 | |
2792 | * | |
bdb7b79b | 2793 | * long bpf_sock_ops_cb_flags_set(struct bpf_sock_ops *bpf_sock, int argval) |
9cde0c88 QM |
2794 | * Description |
2795 | * Attempt to set the value of the **bpf_sock_ops_cb_flags** field | |
2796 | * for the full TCP socket associated to *bpf_sock_ops* to | |
2797 | * *argval*. | |
2798 | * | |
2799 | * The primary use of this field is to determine if there should | |
2800 | * be calls to eBPF programs of type | |
2801 | * **BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP | |
2802 | * code. A program of the same type can change its value, per | |
2803 | * connection and as necessary, when the connection is | |
2804 | * established. This field is directly accessible for reading, but | |
2805 | * this helper must be used for updates in order to return an | |
2806 | * error if an eBPF program tries to set a callback that is not | |
2807 | * supported in the current kernel. | |
2808 | * | |
4635b0ae | 2809 | * *argval* is a flag array which can combine these flags: |
9cde0c88 QM |
2810 | * |
2811 | * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out) | |
2812 | * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission) | |
2813 | * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change) | |
692cbaa9 | 2814 | * * **BPF_SOCK_OPS_RTT_CB_FLAG** (every RTT) |
9cde0c88 | 2815 | * |
4635b0ae MM |
2816 | * Therefore, this function can be used to clear a callback flag by |
2817 | * setting the appropriate bit to zero. e.g. to disable the RTO | |
2818 | * callback: | |
2819 | * | |
2820 | * **bpf_sock_ops_cb_flags_set(bpf_sock,** | |
2821 | * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)** | |
2822 | * | |
9cde0c88 QM |
2823 | * Here are some examples of where one could call such eBPF |
2824 | * program: | |
2825 | * | |
2826 | * * When RTO fires. | |
2827 | * * When a packet is retransmitted. | |
2828 | * * When the connection terminates. | |
2829 | * * When a packet is sent. | |
2830 | * * When a packet is received. | |
2831 | * Return | |
2832 | * Code **-EINVAL** if the socket is not a full TCP socket; | |
2833 | * otherwise, a positive number containing the bits that could not | |
2834 | * be set is returned (which comes down to 0 if all bits were set | |
2835 | * as required). | |
2836 | * | |
bdb7b79b | 2837 | * long bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags) |
9cde0c88 QM |
2838 | * Description |
2839 | * This helper is used in programs implementing policies at the | |
2840 | * socket level. If the message *msg* is allowed to pass (i.e. if | |
2841 | * the verdict eBPF program returns **SK_PASS**), redirect it to | |
2842 | * the socket referenced by *map* (of type | |
2843 | * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and | |
2844 | * egress interfaces can be used for redirection. The | |
2845 | * **BPF_F_INGRESS** value in *flags* is used to make the | |
2846 | * distinction (ingress path is selected if the flag is present, | |
2847 | * egress path otherwise). This is the only flag supported for now. | |
2848 | * Return | |
2849 | * **SK_PASS** on success, or **SK_DROP** on error. | |
2850 | * | |
bdb7b79b | 2851 | * long bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes) |
9cde0c88 QM |
2852 | * Description |
2853 | * For socket policies, apply the verdict of the eBPF program to | |
2854 | * the next *bytes* (number of bytes) of message *msg*. | |
2855 | * | |
2856 | * For example, this helper can be used in the following cases: | |
2857 | * | |
2858 | * * A single **sendmsg**\ () or **sendfile**\ () system call | |
2859 | * contains multiple logical messages that the eBPF program is | |
2860 | * supposed to read and for which it should apply a verdict. | |
2861 | * * An eBPF program only cares to read the first *bytes* of a | |
2862 | * *msg*. If the message has a large payload, then setting up | |
2863 | * and calling the eBPF program repeatedly for all bytes, even | |
2864 | * though the verdict is already known, would create unnecessary | |
2865 | * overhead. | |
2866 | * | |
2867 | * When called from within an eBPF program, the helper sets a | |
2868 | * counter internal to the BPF infrastructure, that is used to | |
2869 | * apply the last verdict to the next *bytes*. If *bytes* is | |
2870 | * smaller than the current data being processed from a | |
2871 | * **sendmsg**\ () or **sendfile**\ () system call, the first | |
2872 | * *bytes* will be sent and the eBPF program will be re-run with | |
2873 | * the pointer for start of data pointing to byte number *bytes* | |
2874 | * **+ 1**. If *bytes* is larger than the current data being | |
2875 | * processed, then the eBPF verdict will be applied to multiple | |
2876 | * **sendmsg**\ () or **sendfile**\ () calls until *bytes* are | |
2877 | * consumed. | |
2878 | * | |
2879 | * Note that if a socket closes with the internal counter holding | |
2880 | * a non-zero value, this is not a problem because data is not | |
2881 | * being buffered for *bytes* and is sent as it is received. | |
2882 | * Return | |
2883 | * 0 | |
2884 | * | |
bdb7b79b | 2885 | * long bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes) |
9cde0c88 QM |
2886 | * Description |
2887 | * For socket policies, prevent the execution of the verdict eBPF | |
2888 | * program for message *msg* until *bytes* (byte number) have been | |
2889 | * accumulated. | |
2890 | * | |
2891 | * This can be used when one needs a specific number of bytes | |
2892 | * before a verdict can be assigned, even if the data spans | |
2893 | * multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme | |
2894 | * case would be a user calling **sendmsg**\ () repeatedly with | |
2895 | * 1-byte long message segments. Obviously, this is bad for | |
2896 | * performance, but it is still valid. If the eBPF program needs | |
2897 | * *bytes* bytes to validate a header, this helper can be used to | |
2898 | * prevent the eBPF program to be called again until *bytes* have | |
2899 | * been accumulated. | |
2900 | * Return | |
2901 | * 0 | |
2902 | * | |
bdb7b79b | 2903 | * long bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags) |
9cde0c88 QM |
2904 | * Description |
2905 | * For socket policies, pull in non-linear data from user space | |
2906 | * for *msg* and set pointers *msg*\ **->data** and *msg*\ | |
2907 | * **->data_end** to *start* and *end* bytes offsets into *msg*, | |
2908 | * respectively. | |
2909 | * | |
2910 | * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a | |
2911 | * *msg* it can only parse data that the (**data**, **data_end**) | |
2912 | * pointers have already consumed. For **sendmsg**\ () hooks this | |
2913 | * is likely the first scatterlist element. But for calls relying | |
2914 | * on the **sendpage** handler (e.g. **sendfile**\ ()) this will | |
2915 | * be the range (**0**, **0**) because the data is shared with | |
2916 | * user space and by default the objective is to avoid allowing | |
2917 | * user space to modify data while (or after) eBPF verdict is | |
2918 | * being decided. This helper can be used to pull in data and to | |
2919 | * set the start and end pointer to given values. Data will be | |
2920 | * copied if necessary (i.e. if data was not linear and if start | |
2921 | * and end pointers do not point to the same chunk). | |
2922 | * | |
c1fe1e70 | 2923 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
2924 | * packet buffer. Therefore, at load time, all checks on pointers |
2925 | * previously done by the verifier are invalidated and must be | |
2926 | * performed again, if the helper is used in combination with | |
2927 | * direct packet access. | |
2928 | * | |
2929 | * All values for *flags* are reserved for future usage, and must | |
2930 | * be left at zero. | |
2931 | * Return | |
2932 | * 0 on success, or a negative error in case of failure. | |
2933 | * | |
bdb7b79b | 2934 | * long bpf_bind(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len) |
9cde0c88 QM |
2935 | * Description |
2936 | * Bind the socket associated to *ctx* to the address pointed by | |
2937 | * *addr*, of length *addr_len*. This allows for making outgoing | |
2938 | * connection from the desired IP address, which can be useful for | |
2939 | * example when all processes inside a cgroup should use one | |
2940 | * single IP address on a host that has multiple IP configured. | |
2941 | * | |
2942 | * This helper works for IPv4 and IPv6, TCP and UDP sockets. The | |
2943 | * domain (*addr*\ **->sa_family**) must be **AF_INET** (or | |
8086fbaf SF |
2944 | * **AF_INET6**). It's advised to pass zero port (**sin_port** |
2945 | * or **sin6_port**) which triggers IP_BIND_ADDRESS_NO_PORT-like | |
2946 | * behavior and lets the kernel efficiently pick up an unused | |
2947 | * port as long as 4-tuple is unique. Passing non-zero port might | |
2948 | * lead to degraded performance. | |
9cde0c88 QM |
2949 | * Return |
2950 | * 0 on success, or a negative error in case of failure. | |
2951 | * | |
bdb7b79b | 2952 | * long bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta) |
9cde0c88 QM |
2953 | * Description |
2954 | * Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is | |
fb53d3b6 AS |
2955 | * possible to both shrink and grow the packet tail. |
2956 | * Shrink done via *delta* being a negative integer. | |
9cde0c88 | 2957 | * |
c1fe1e70 | 2958 | * A call to this helper is susceptible to change the underlying |
9cde0c88 QM |
2959 | * packet buffer. Therefore, at load time, all checks on pointers |
2960 | * previously done by the verifier are invalidated and must be | |
2961 | * performed again, if the helper is used in combination with | |
2962 | * direct packet access. | |
2963 | * Return | |
2964 | * 0 on success, or a negative error in case of failure. | |
2965 | * | |
bdb7b79b | 2966 | * long bpf_skb_get_xfrm_state(struct sk_buff *skb, u32 index, struct bpf_xfrm_state *xfrm_state, u32 size, u64 flags) |
9cde0c88 QM |
2967 | * Description |
2968 | * Retrieve the XFRM state (IP transform framework, see also | |
2969 | * **ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*. | |
2970 | * | |
2971 | * The retrieved value is stored in the **struct bpf_xfrm_state** | |
2972 | * pointed by *xfrm_state* and of length *size*. | |
2973 | * | |
2974 | * All values for *flags* are reserved for future usage, and must | |
2975 | * be left at zero. | |
2976 | * | |
2977 | * This helper is available only if the kernel was compiled with | |
2978 | * **CONFIG_XFRM** configuration option. | |
2979 | * Return | |
2980 | * 0 on success, or a negative error in case of failure. | |
de2ff05f | 2981 | * |
bdb7b79b | 2982 | * long bpf_get_stack(void *ctx, void *buf, u32 size, u64 flags) |
de2ff05f | 2983 | * Description |
a56497d3 QM |
2984 | * Return a user or a kernel stack in bpf program provided buffer. |
2985 | * To achieve this, the helper needs *ctx*, which is a pointer | |
2986 | * to the context on which the tracing program is executed. | |
2987 | * To store the stacktrace, the bpf program provides *buf* with | |
2988 | * a nonnegative *size*. | |
2989 | * | |
2990 | * The last argument, *flags*, holds the number of stack frames to | |
2991 | * skip (from 0 to 255), masked with | |
2992 | * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set | |
2993 | * the following flags: | |
2994 | * | |
2995 | * **BPF_F_USER_STACK** | |
2996 | * Collect a user space stack instead of a kernel stack. | |
2997 | * **BPF_F_USER_BUILD_ID** | |
2998 | * Collect buildid+offset instead of ips for user stack, | |
2999 | * only valid if **BPF_F_USER_STACK** is also specified. | |
3000 | * | |
3001 | * **bpf_get_stack**\ () can collect up to | |
3002 | * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject | |
3003 | * to sufficient large buffer size. Note that | |
3004 | * this limit can be controlled with the **sysctl** program, and | |
3005 | * that it should be manually increased in order to profile long | |
3006 | * user stacks (such as stacks for Java programs). To do so, use: | |
3007 | * | |
3008 | * :: | |
3009 | * | |
3010 | * # sysctl kernel.perf_event_max_stack=<new value> | |
de2ff05f | 3011 | * Return |
98870605 GT |
3012 | * The non-negative copied *buf* length equal to or less than |
3013 | * *size* on success, or a negative error in case of failure. | |
32b3652c | 3014 | * |
bdb7b79b | 3015 | * long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header) |
32b3652c DB |
3016 | * Description |
3017 | * This helper is similar to **bpf_skb_load_bytes**\ () in that | |
3018 | * it provides an easy way to load *len* bytes from *offset* | |
3019 | * from the packet associated to *skb*, into the buffer pointed | |
3020 | * by *to*. The difference to **bpf_skb_load_bytes**\ () is that | |
3021 | * a fifth argument *start_header* exists in order to select a | |
3022 | * base offset to start from. *start_header* can be one of: | |
3023 | * | |
3024 | * **BPF_HDR_START_MAC** | |
3025 | * Base offset to load data from is *skb*'s mac header. | |
3026 | * **BPF_HDR_START_NET** | |
3027 | * Base offset to load data from is *skb*'s network header. | |
3028 | * | |
3029 | * In general, "direct packet access" is the preferred method to | |
3030 | * access packet data, however, this helper is in particular useful | |
3031 | * in socket filters where *skb*\ **->data** does not always point | |
3032 | * to the start of the mac header and where "direct packet access" | |
3033 | * is not available. | |
32b3652c DB |
3034 | * Return |
3035 | * 0 on success, or a negative error in case of failure. | |
3036 | * | |
bdb7b79b | 3037 | * long bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags) |
cb9c28ef PB |
3038 | * Description |
3039 | * Do FIB lookup in kernel tables using parameters in *params*. | |
3040 | * If lookup is successful and result shows packet is to be | |
3041 | * forwarded, the neighbor tables are searched for the nexthop. | |
3042 | * If successful (ie., FIB lookup shows forwarding and nexthop | |
6bdd533c SY |
3043 | * is resolved), the nexthop address is returned in ipv4_dst |
3044 | * or ipv6_dst based on family, smac is set to mac address of | |
3045 | * egress device, dmac is set to nexthop mac address, rt_metric | |
9b8ca379 QM |
3046 | * is set to metric from route (IPv4/IPv6 only), and ifindex |
3047 | * is set to the device index of the nexthop from the FIB lookup. | |
cb9c28ef | 3048 | * |
0bd72117 DB |
3049 | * *plen* argument is the size of the passed in struct. |
3050 | * *flags* argument can be a combination of one or more of the | |
3051 | * following values: | |
cb9c28ef | 3052 | * |
7a279e93 QM |
3053 | * **BPF_FIB_LOOKUP_DIRECT** |
3054 | * Do a direct table lookup vs full lookup using FIB | |
3055 | * rules. | |
3056 | * **BPF_FIB_LOOKUP_OUTPUT** | |
3057 | * Perform lookup from an egress perspective (default is | |
3058 | * ingress). | |
cb9c28ef | 3059 | * |
0bd72117 DB |
3060 | * *ctx* is either **struct xdp_md** for XDP programs or |
3061 | * **struct sk_buff** tc cls_act programs. | |
3062 | * Return | |
9b8ca379 QM |
3063 | * * < 0 if any input argument is invalid |
3064 | * * 0 on success (packet is forwarded, nexthop neighbor exists) | |
3065 | * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the | |
3066 | * packet is not forwarded or needs assist from full stack | |
b8b394fa | 3067 | * |
e1850ea9 JDB |
3068 | * If lookup fails with BPF_FIB_LKUP_RET_FRAG_NEEDED, then the MTU |
3069 | * was exceeded and output params->mtu_result contains the MTU. | |
3070 | * | |
bdb7b79b | 3071 | * long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) |
b8b394fa JF |
3072 | * Description |
3073 | * Add an entry to, or update a sockhash *map* referencing sockets. | |
3074 | * The *skops* is used as a new value for the entry associated to | |
3075 | * *key*. *flags* is one of: | |
3076 | * | |
3077 | * **BPF_NOEXIST** | |
3078 | * The entry for *key* must not exist in the map. | |
3079 | * **BPF_EXIST** | |
3080 | * The entry for *key* must already exist in the map. | |
3081 | * **BPF_ANY** | |
3082 | * No condition on the existence of the entry for *key*. | |
3083 | * | |
3084 | * If the *map* has eBPF programs (parser and verdict), those will | |
3085 | * be inherited by the socket being added. If the socket is | |
3086 | * already attached to eBPF programs, this results in an error. | |
3087 | * Return | |
3088 | * 0 on success, or a negative error in case of failure. | |
3089 | * | |
bdb7b79b | 3090 | * long bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags) |
b8b394fa JF |
3091 | * Description |
3092 | * This helper is used in programs implementing policies at the | |
3093 | * socket level. If the message *msg* is allowed to pass (i.e. if | |
3094 | * the verdict eBPF program returns **SK_PASS**), redirect it to | |
3095 | * the socket referenced by *map* (of type | |
3096 | * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and | |
3097 | * egress interfaces can be used for redirection. The | |
3098 | * **BPF_F_INGRESS** value in *flags* is used to make the | |
3099 | * distinction (ingress path is selected if the flag is present, | |
3100 | * egress path otherwise). This is the only flag supported for now. | |
3101 | * Return | |
3102 | * **SK_PASS** on success, or **SK_DROP** on error. | |
3103 | * | |
bdb7b79b | 3104 | * long bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags) |
b8b394fa JF |
3105 | * Description |
3106 | * This helper is used in programs implementing policies at the | |
3107 | * skb socket level. If the sk_buff *skb* is allowed to pass (i.e. | |
49f3d12b | 3108 | * if the verdict eBPF program returns **SK_PASS**), redirect it |
b8b394fa JF |
3109 | * to the socket referenced by *map* (of type |
3110 | * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and | |
3111 | * egress interfaces can be used for redirection. The | |
3112 | * **BPF_F_INGRESS** value in *flags* is used to make the | |
3113 | * distinction (ingress path is selected if the flag is present, | |
3114 | * egress otherwise). This is the only flag supported for now. | |
3115 | * Return | |
3116 | * **SK_PASS** on success, or **SK_DROP** on error. | |
c99a84ea | 3117 | * |
bdb7b79b | 3118 | * long bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len) |
c99a84ea MX |
3119 | * Description |
3120 | * Encapsulate the packet associated to *skb* within a Layer 3 | |
3121 | * protocol header. This header is provided in the buffer at | |
3122 | * address *hdr*, with *len* its size in bytes. *type* indicates | |
3123 | * the protocol of the header and can be one of: | |
3124 | * | |
3125 | * **BPF_LWT_ENCAP_SEG6** | |
3126 | * IPv6 encapsulation with Segment Routing Header | |
3127 | * (**struct ipv6_sr_hdr**). *hdr* only contains the SRH, | |
3128 | * the IPv6 header is computed by the kernel. | |
3129 | * **BPF_LWT_ENCAP_SEG6_INLINE** | |
3130 | * Only works if *skb* contains an IPv6 packet. Insert a | |
3131 | * Segment Routing Header (**struct ipv6_sr_hdr**) inside | |
3132 | * the IPv6 header. | |
755db477 PO |
3133 | * **BPF_LWT_ENCAP_IP** |
3134 | * IP encapsulation (GRE/GUE/IPIP/etc). The outer header | |
3135 | * must be IPv4 or IPv6, followed by zero or more | |
c1fe1e70 QM |
3136 | * additional headers, up to **LWT_BPF_MAX_HEADROOM** |
3137 | * total bytes in all prepended headers. Please note that | |
3138 | * if **skb_is_gso**\ (*skb*) is true, no more than two | |
3139 | * headers can be prepended, and the inner header, if | |
3140 | * present, should be either GRE or UDP/GUE. | |
3141 | * | |
3142 | * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs | |
3143 | * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can | |
3144 | * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and | |
3145 | * **BPF_PROG_TYPE_LWT_XMIT**. | |
3146 | * | |
3147 | * A call to this helper is susceptible to change the underlying | |
c99a84ea MX |
3148 | * packet buffer. Therefore, at load time, all checks on pointers |
3149 | * previously done by the verifier are invalidated and must be | |
3150 | * performed again, if the helper is used in combination with | |
3151 | * direct packet access. | |
3152 | * Return | |
3153 | * 0 on success, or a negative error in case of failure. | |
3154 | * | |
bdb7b79b | 3155 | * long bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len) |
c99a84ea MX |
3156 | * Description |
3157 | * Store *len* bytes from address *from* into the packet | |
3158 | * associated to *skb*, at *offset*. Only the flags, tag and TLVs | |
3159 | * inside the outermost IPv6 Segment Routing Header can be | |
3160 | * modified through this helper. | |
3161 | * | |
c1fe1e70 | 3162 | * A call to this helper is susceptible to change the underlying |
c99a84ea MX |
3163 | * packet buffer. Therefore, at load time, all checks on pointers |
3164 | * previously done by the verifier are invalidated and must be | |
3165 | * performed again, if the helper is used in combination with | |
3166 | * direct packet access. | |
3167 | * Return | |
3168 | * 0 on success, or a negative error in case of failure. | |
3169 | * | |
bdb7b79b | 3170 | * long bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta) |
c99a84ea MX |
3171 | * Description |
3172 | * Adjust the size allocated to TLVs in the outermost IPv6 | |
3173 | * Segment Routing Header contained in the packet associated to | |
3174 | * *skb*, at position *offset* by *delta* bytes. Only offsets | |
3175 | * after the segments are accepted. *delta* can be as well | |
3176 | * positive (growing) as negative (shrinking). | |
3177 | * | |
c1fe1e70 | 3178 | * A call to this helper is susceptible to change the underlying |
c99a84ea MX |
3179 | * packet buffer. Therefore, at load time, all checks on pointers |
3180 | * previously done by the verifier are invalidated and must be | |
3181 | * performed again, if the helper is used in combination with | |
3182 | * direct packet access. | |
3183 | * Return | |
3184 | * 0 on success, or a negative error in case of failure. | |
3185 | * | |
bdb7b79b | 3186 | * long bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len) |
c99a84ea MX |
3187 | * Description |
3188 | * Apply an IPv6 Segment Routing action of type *action* to the | |
3189 | * packet associated to *skb*. Each action takes a parameter | |
3190 | * contained at address *param*, and of length *param_len* bytes. | |
3191 | * *action* can be one of: | |
3192 | * | |
3193 | * **SEG6_LOCAL_ACTION_END_X** | |
3194 | * End.X action: Endpoint with Layer-3 cross-connect. | |
3195 | * Type of *param*: **struct in6_addr**. | |
3196 | * **SEG6_LOCAL_ACTION_END_T** | |
3197 | * End.T action: Endpoint with specific IPv6 table lookup. | |
3198 | * Type of *param*: **int**. | |
3199 | * **SEG6_LOCAL_ACTION_END_B6** | |
3200 | * End.B6 action: Endpoint bound to an SRv6 policy. | |
c1fe1e70 | 3201 | * Type of *param*: **struct ipv6_sr_hdr**. |
c99a84ea MX |
3202 | * **SEG6_LOCAL_ACTION_END_B6_ENCAP** |
3203 | * End.B6.Encap action: Endpoint bound to an SRv6 | |
3204 | * encapsulation policy. | |
c1fe1e70 | 3205 | * Type of *param*: **struct ipv6_sr_hdr**. |
c99a84ea | 3206 | * |
c1fe1e70 | 3207 | * A call to this helper is susceptible to change the underlying |
c99a84ea MX |
3208 | * packet buffer. Therefore, at load time, all checks on pointers |
3209 | * previously done by the verifier are invalidated and must be | |
3210 | * performed again, if the helper is used in combination with | |
3211 | * direct packet access. | |
3212 | * Return | |
3213 | * 0 on success, or a negative error in case of failure. | |
6bdd533c | 3214 | * |
bdb7b79b | 3215 | * long bpf_rc_repeat(void *ctx) |
6bdd533c SY |
3216 | * Description |
3217 | * This helper is used in programs implementing IR decoding, to | |
ea6eced0 QM |
3218 | * report a successfully decoded repeat key message. This delays |
3219 | * the generation of a key up event for previously generated | |
3220 | * key down event. | |
6bdd533c | 3221 | * |
ea6eced0 QM |
3222 | * Some IR protocols like NEC have a special IR message for |
3223 | * repeating last button, for when a button is held down. | |
6bdd533c SY |
3224 | * |
3225 | * The *ctx* should point to the lirc sample as passed into | |
3226 | * the program. | |
3227 | * | |
6bdd533c SY |
3228 | * This helper is only available is the kernel was compiled with |
3229 | * the **CONFIG_BPF_LIRC_MODE2** configuration option set to | |
3230 | * "**y**". | |
6bdd533c SY |
3231 | * Return |
3232 | * 0 | |
3233 | * | |
bdb7b79b | 3234 | * long bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle) |
6bdd533c SY |
3235 | * Description |
3236 | * This helper is used in programs implementing IR decoding, to | |
ea6eced0 QM |
3237 | * report a successfully decoded key press with *scancode*, |
3238 | * *toggle* value in the given *protocol*. The scancode will be | |
3239 | * translated to a keycode using the rc keymap, and reported as | |
3240 | * an input key down event. After a period a key up event is | |
3241 | * generated. This period can be extended by calling either | |
3242 | * **bpf_rc_keydown**\ () again with the same values, or calling | |
3243 | * **bpf_rc_repeat**\ (). | |
6bdd533c | 3244 | * |
ff20460e | 3245 | * Some protocols include a toggle bit, in case the button was |
ea6eced0 | 3246 | * released and pressed again between consecutive scancodes. |
6bdd533c SY |
3247 | * |
3248 | * The *ctx* should point to the lirc sample as passed into | |
3249 | * the program. | |
3250 | * | |
ea6eced0 QM |
3251 | * The *protocol* is the decoded protocol number (see |
3252 | * **enum rc_proto** for some predefined values). | |
3253 | * | |
6bdd533c SY |
3254 | * This helper is only available is the kernel was compiled with |
3255 | * the **CONFIG_BPF_LIRC_MODE2** configuration option set to | |
3256 | * "**y**". | |
6bdd533c SY |
3257 | * Return |
3258 | * 0 | |
6b6a1925 | 3259 | * |
ea6eced0 | 3260 | * u64 bpf_skb_cgroup_id(struct sk_buff *skb) |
6b6a1925 DB |
3261 | * Description |
3262 | * Return the cgroup v2 id of the socket associated with the *skb*. | |
3263 | * This is roughly similar to the **bpf_get_cgroup_classid**\ () | |
3264 | * helper for cgroup v1 by providing a tag resp. identifier that | |
3265 | * can be matched on or used for map lookups e.g. to implement | |
3266 | * policy. The cgroup v2 id of a given path in the hierarchy is | |
3267 | * exposed in user space through the f_handle API in order to get | |
3268 | * to the same 64-bit id. | |
3269 | * | |
3270 | * This helper can be used on TC egress path, but not on ingress, | |
3271 | * and is available only if the kernel was compiled with the | |
3272 | * **CONFIG_SOCK_CGROUP_DATA** configuration option. | |
3273 | * Return | |
3274 | * The id is returned or 0 in case the id could not be retrieved. | |
c7ddbbaf YS |
3275 | * |
3276 | * u64 bpf_get_current_cgroup_id(void) | |
e40fbbf0 UA |
3277 | * Description |
3278 | * Get the current cgroup id based on the cgroup within which | |
3279 | * the current task is running. | |
c7ddbbaf YS |
3280 | * Return |
3281 | * A 64-bit integer containing the current cgroup id based | |
3282 | * on the cgroup within which the current task is running. | |
c419cf52 | 3283 | * |
ea6eced0 | 3284 | * void *bpf_get_local_storage(void *map, u64 flags) |
c419cf52 RG |
3285 | * Description |
3286 | * Get the pointer to the local storage area. | |
3287 | * The type and the size of the local storage is defined | |
3288 | * by the *map* argument. | |
3289 | * The *flags* meaning is specific for each map type, | |
3290 | * and has to be 0 for cgroup local storage. | |
3291 | * | |
0bd72117 DB |
3292 | * Depending on the BPF program type, a local storage area |
3293 | * can be shared between multiple instances of the BPF program, | |
c419cf52 RG |
3294 | * running simultaneously. |
3295 | * | |
3296 | * A user should care about the synchronization by himself. | |
91c960b0 | 3297 | * For example, by using the **BPF_ATOMIC** instructions to alter |
c419cf52 RG |
3298 | * the shared data. |
3299 | * Return | |
0bd72117 | 3300 | * A pointer to the local storage area. |
3bd43a8c | 3301 | * |
bdb7b79b | 3302 | * long bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags) |
3bd43a8c | 3303 | * Description |
0bd72117 | 3304 | * Select a **SO_REUSEPORT** socket from a |
f170acda | 3305 | * **BPF_MAP_TYPE_REUSEPORT_SOCKARRAY** *map*. |
0bd72117 DB |
3306 | * It checks the selected socket is matching the incoming |
3307 | * request in the socket buffer. | |
3bd43a8c MKL |
3308 | * Return |
3309 | * 0 on success, or a negative error in case of failure. | |
6acc9b43 | 3310 | * |
ea6eced0 QM |
3311 | * u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level) |
3312 | * Description | |
3313 | * Return id of cgroup v2 that is ancestor of cgroup associated | |
3314 | * with the *skb* at the *ancestor_level*. The root cgroup is at | |
3315 | * *ancestor_level* zero and each step down the hierarchy | |
3316 | * increments the level. If *ancestor_level* == level of cgroup | |
3317 | * associated with *skb*, then return value will be same as that | |
3318 | * of **bpf_skb_cgroup_id**\ (). | |
3319 | * | |
3320 | * The helper is useful to implement policies based on cgroups | |
3321 | * that are upper in hierarchy than immediate cgroup associated | |
3322 | * with *skb*. | |
3323 | * | |
3324 | * The format of returned id and helper limitations are same as in | |
3325 | * **bpf_skb_cgroup_id**\ (). | |
3326 | * Return | |
3327 | * The id is returned or 0 in case the id could not be retrieved. | |
3328 | * | |
f71c6143 | 3329 | * struct bpf_sock *bpf_sk_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) |
6acc9b43 JS |
3330 | * Description |
3331 | * Look for TCP socket matching *tuple*, optionally in a child | |
3332 | * network namespace *netns*. The return value must be checked, | |
0bd72117 | 3333 | * and if non-**NULL**, released via **bpf_sk_release**\ (). |
6acc9b43 JS |
3334 | * |
3335 | * The *ctx* should point to the context of the program, such as | |
3336 | * the skb or socket (depending on the hook in use). This is used | |
3337 | * to determine the base network namespace for the lookup. | |
3338 | * | |
3339 | * *tuple_size* must be one of: | |
3340 | * | |
3341 | * **sizeof**\ (*tuple*\ **->ipv4**) | |
3342 | * Look for an IPv4 socket. | |
3343 | * **sizeof**\ (*tuple*\ **->ipv6**) | |
3344 | * Look for an IPv6 socket. | |
3345 | * | |
f71c6143 | 3346 | * If the *netns* is a negative signed 32-bit integer, then the |
bfdfa517 | 3347 | * socket lookup table in the netns associated with the *ctx* |
f71c6143 JS |
3348 | * will be used. For the TC hooks, this is the netns of the device |
3349 | * in the skb. For socket hooks, this is the netns of the socket. | |
3350 | * If *netns* is any other signed 32-bit value greater than or | |
3351 | * equal to zero then it specifies the ID of the netns relative to | |
3352 | * the netns associated with the *ctx*. *netns* values beyond the | |
3353 | * range of 32-bit integers are reserved for future use. | |
6acc9b43 JS |
3354 | * |
3355 | * All values for *flags* are reserved for future usage, and must | |
3356 | * be left at zero. | |
3357 | * | |
3358 | * This helper is available only if the kernel was compiled with | |
3359 | * **CONFIG_NET** configuration option. | |
3360 | * Return | |
0bd72117 DB |
3361 | * Pointer to **struct bpf_sock**, or **NULL** in case of failure. |
3362 | * For sockets with reuseport option, the **struct bpf_sock** | |
c1fe1e70 QM |
3363 | * result is from *reuse*\ **->socks**\ [] using the hash of the |
3364 | * tuple. | |
6acc9b43 | 3365 | * |
f71c6143 | 3366 | * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) |
6acc9b43 JS |
3367 | * Description |
3368 | * Look for UDP socket matching *tuple*, optionally in a child | |
3369 | * network namespace *netns*. The return value must be checked, | |
0bd72117 | 3370 | * and if non-**NULL**, released via **bpf_sk_release**\ (). |
6acc9b43 JS |
3371 | * |
3372 | * The *ctx* should point to the context of the program, such as | |
3373 | * the skb or socket (depending on the hook in use). This is used | |
3374 | * to determine the base network namespace for the lookup. | |
3375 | * | |
3376 | * *tuple_size* must be one of: | |
3377 | * | |
3378 | * **sizeof**\ (*tuple*\ **->ipv4**) | |
3379 | * Look for an IPv4 socket. | |
3380 | * **sizeof**\ (*tuple*\ **->ipv6**) | |
3381 | * Look for an IPv6 socket. | |
3382 | * | |
f71c6143 | 3383 | * If the *netns* is a negative signed 32-bit integer, then the |
bfdfa517 | 3384 | * socket lookup table in the netns associated with the *ctx* |
f71c6143 JS |
3385 | * will be used. For the TC hooks, this is the netns of the device |
3386 | * in the skb. For socket hooks, this is the netns of the socket. | |
3387 | * If *netns* is any other signed 32-bit value greater than or | |
3388 | * equal to zero then it specifies the ID of the netns relative to | |
3389 | * the netns associated with the *ctx*. *netns* values beyond the | |
3390 | * range of 32-bit integers are reserved for future use. | |
6acc9b43 JS |
3391 | * |
3392 | * All values for *flags* are reserved for future usage, and must | |
3393 | * be left at zero. | |
3394 | * | |
3395 | * This helper is available only if the kernel was compiled with | |
3396 | * **CONFIG_NET** configuration option. | |
3397 | * Return | |
0bd72117 DB |
3398 | * Pointer to **struct bpf_sock**, or **NULL** in case of failure. |
3399 | * For sockets with reuseport option, the **struct bpf_sock** | |
c1fe1e70 QM |
3400 | * result is from *reuse*\ **->socks**\ [] using the hash of the |
3401 | * tuple. | |
6acc9b43 | 3402 | * |
a5fa25ad | 3403 | * long bpf_sk_release(void *sock) |
6acc9b43 | 3404 | * Description |
0bd72117 DB |
3405 | * Release the reference held by *sock*. *sock* must be a |
3406 | * non-**NULL** pointer that was returned from | |
3407 | * **bpf_sk_lookup_xxx**\ (). | |
6acc9b43 JS |
3408 | * Return |
3409 | * 0 on success, or a negative error in case of failure. | |
f908d26b | 3410 | * |
bdb7b79b | 3411 | * long bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags) |
ea6eced0 QM |
3412 | * Description |
3413 | * Push an element *value* in *map*. *flags* is one of: | |
3414 | * | |
3415 | * **BPF_EXIST** | |
3416 | * If the queue/stack is full, the oldest element is | |
3417 | * removed to make room for this. | |
3418 | * Return | |
3419 | * 0 on success, or a negative error in case of failure. | |
3420 | * | |
bdb7b79b | 3421 | * long bpf_map_pop_elem(struct bpf_map *map, void *value) |
0bd72117 DB |
3422 | * Description |
3423 | * Pop an element from *map*. | |
3424 | * Return | |
3425 | * 0 on success, or a negative error in case of failure. | |
3426 | * | |
bdb7b79b | 3427 | * long bpf_map_peek_elem(struct bpf_map *map, void *value) |
0bd72117 DB |
3428 | * Description |
3429 | * Get an element from *map* without removing it. | |
3430 | * Return | |
3431 | * 0 on success, or a negative error in case of failure. | |
3432 | * | |
bdb7b79b | 3433 | * long bpf_msg_push_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) |
f908d26b | 3434 | * Description |
0bd72117 | 3435 | * For socket policies, insert *len* bytes into *msg* at offset |
f908d26b JF |
3436 | * *start*. |
3437 | * | |
3438 | * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a | |
0bd72117 | 3439 | * *msg* it may want to insert metadata or options into the *msg*. |
f908d26b JF |
3440 | * This can later be read and used by any of the lower layer BPF |
3441 | * hooks. | |
3442 | * | |
3443 | * This helper may fail if under memory pressure (a malloc | |
3444 | * fails) in these cases BPF programs will get an appropriate | |
3445 | * error and BPF programs will need to handle them. | |
f908d26b JF |
3446 | * Return |
3447 | * 0 on success, or a negative error in case of failure. | |
d913a227 | 3448 | * |
bdb7b79b | 3449 | * long bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) |
0bd72117 | 3450 | * Description |
5f0e5412 | 3451 | * Will remove *len* bytes from a *msg* starting at byte *start*. |
d913a227 JF |
3452 | * This may result in **ENOMEM** errors under certain situations if |
3453 | * an allocation and copy are required due to a full ring buffer. | |
3454 | * However, the helper will try to avoid doing the allocation | |
3455 | * if possible. Other errors can occur if input parameters are | |
0bd72117 | 3456 | * invalid either due to *start* byte not being valid part of *msg* |
d913a227 | 3457 | * payload and/or *pop* value being to large. |
01d3240a SY |
3458 | * Return |
3459 | * 0 on success, or a negative error in case of failure. | |
3460 | * | |
bdb7b79b | 3461 | * long bpf_rc_pointer_rel(void *ctx, s32 rel_x, s32 rel_y) |
01d3240a SY |
3462 | * Description |
3463 | * This helper is used in programs implementing IR decoding, to | |
3464 | * report a successfully decoded pointer movement. | |
3465 | * | |
3466 | * The *ctx* should point to the lirc sample as passed into | |
3467 | * the program. | |
d913a227 | 3468 | * |
01d3240a SY |
3469 | * This helper is only available is the kernel was compiled with |
3470 | * the **CONFIG_BPF_LIRC_MODE2** configuration option set to | |
3471 | * "**y**". | |
d913a227 | 3472 | * Return |
01d3240a | 3473 | * 0 |
281f9e75 | 3474 | * |
bdb7b79b | 3475 | * long bpf_spin_lock(struct bpf_spin_lock *lock) |
ea6eced0 QM |
3476 | * Description |
3477 | * Acquire a spinlock represented by the pointer *lock*, which is | |
3478 | * stored as part of a value of a map. Taking the lock allows to | |
3479 | * safely update the rest of the fields in that value. The | |
3480 | * spinlock can (and must) later be released with a call to | |
3481 | * **bpf_spin_unlock**\ (\ *lock*\ ). | |
3482 | * | |
3483 | * Spinlocks in BPF programs come with a number of restrictions | |
3484 | * and constraints: | |
3485 | * | |
3486 | * * **bpf_spin_lock** objects are only allowed inside maps of | |
3487 | * types **BPF_MAP_TYPE_HASH** and **BPF_MAP_TYPE_ARRAY** (this | |
3488 | * list could be extended in the future). | |
3489 | * * BTF description of the map is mandatory. | |
3490 | * * The BPF program can take ONE lock at a time, since taking two | |
3491 | * or more could cause dead locks. | |
3492 | * * Only one **struct bpf_spin_lock** is allowed per map element. | |
3493 | * * When the lock is taken, calls (either BPF to BPF or helpers) | |
3494 | * are not allowed. | |
3495 | * * The **BPF_LD_ABS** and **BPF_LD_IND** instructions are not | |
3496 | * allowed inside a spinlock-ed region. | |
3497 | * * The BPF program MUST call **bpf_spin_unlock**\ () to release | |
3498 | * the lock, on all execution paths, before it returns. | |
3499 | * * The BPF program can access **struct bpf_spin_lock** only via | |
3500 | * the **bpf_spin_lock**\ () and **bpf_spin_unlock**\ () | |
3501 | * helpers. Loading or storing data into the **struct | |
3502 | * bpf_spin_lock** *lock*\ **;** field of a map is not allowed. | |
3503 | * * To use the **bpf_spin_lock**\ () helper, the BTF description | |
3504 | * of the map value must be a struct and have **struct | |
3505 | * bpf_spin_lock** *anyname*\ **;** field at the top level. | |
3506 | * Nested lock inside another struct is not allowed. | |
3507 | * * The **struct bpf_spin_lock** *lock* field in a map value must | |
3508 | * be aligned on a multiple of 4 bytes in that value. | |
3509 | * * Syscall with command **BPF_MAP_LOOKUP_ELEM** does not copy | |
3510 | * the **bpf_spin_lock** field to user space. | |
3511 | * * Syscall with command **BPF_MAP_UPDATE_ELEM**, or update from | |
3512 | * a BPF program, do not update the **bpf_spin_lock** field. | |
3513 | * * **bpf_spin_lock** cannot be on the stack or inside a | |
3514 | * networking packet (it can only be inside of a map values). | |
3515 | * * **bpf_spin_lock** is available to root only. | |
3516 | * * Tracing programs and socket filter programs cannot use | |
3517 | * **bpf_spin_lock**\ () due to insufficient preemption checks | |
3518 | * (but this may change in the future). | |
3519 | * * **bpf_spin_lock** is not allowed in inner maps of map-in-map. | |
3520 | * Return | |
3521 | * 0 | |
3522 | * | |
bdb7b79b | 3523 | * long bpf_spin_unlock(struct bpf_spin_lock *lock) |
ea6eced0 QM |
3524 | * Description |
3525 | * Release the *lock* previously locked by a call to | |
3526 | * **bpf_spin_lock**\ (\ *lock*\ ). | |
3527 | * Return | |
3528 | * 0 | |
3529 | * | |
281f9e75 MKL |
3530 | * struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk) |
3531 | * Description | |
3532 | * This helper gets a **struct bpf_sock** pointer such | |
ea6eced0 | 3533 | * that all the fields in this **bpf_sock** can be accessed. |
281f9e75 | 3534 | * Return |
ea6eced0 | 3535 | * A **struct bpf_sock** pointer on success, or **NULL** in |
281f9e75 MKL |
3536 | * case of failure. |
3537 | * | |
3538 | * struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk) | |
3539 | * Description | |
3540 | * This helper gets a **struct bpf_tcp_sock** pointer from a | |
3541 | * **struct bpf_sock** pointer. | |
281f9e75 | 3542 | * Return |
ea6eced0 | 3543 | * A **struct bpf_tcp_sock** pointer on success, or **NULL** in |
281f9e75 | 3544 | * case of failure. |
5cce85c6 | 3545 | * |
bdb7b79b | 3546 | * long bpf_skb_ecn_set_ce(struct sk_buff *skb) |
ea6eced0 QM |
3547 | * Description |
3548 | * Set ECN (Explicit Congestion Notification) field of IP header | |
3549 | * to **CE** (Congestion Encountered) if current value is **ECT** | |
3550 | * (ECN Capable Transport). Otherwise, do nothing. Works with IPv6 | |
3551 | * and IPv4. | |
3552 | * Return | |
3553 | * 1 if the **CE** flag is set (either by the current helper call | |
3554 | * or because it was already present), 0 if it is not set. | |
ef776a27 MKL |
3555 | * |
3556 | * struct bpf_sock *bpf_get_listener_sock(struct bpf_sock *sk) | |
3557 | * Description | |
ea6eced0 QM |
3558 | * Return a **struct bpf_sock** pointer in **TCP_LISTEN** state. |
3559 | * **bpf_sk_release**\ () is unnecessary and not allowed. | |
ef776a27 | 3560 | * Return |
ea6eced0 | 3561 | * A **struct bpf_sock** pointer on success, or **NULL** in |
ef776a27 | 3562 | * case of failure. |
253c8dde LB |
3563 | * |
3564 | * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) | |
3565 | * Description | |
3566 | * Look for TCP socket matching *tuple*, optionally in a child | |
3567 | * network namespace *netns*. The return value must be checked, | |
3568 | * and if non-**NULL**, released via **bpf_sk_release**\ (). | |
3569 | * | |
c1fe1e70 QM |
3570 | * This function is identical to **bpf_sk_lookup_tcp**\ (), except |
3571 | * that it also returns timewait or request sockets. Use | |
3572 | * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the | |
3573 | * full structure. | |
253c8dde LB |
3574 | * |
3575 | * This helper is available only if the kernel was compiled with | |
3576 | * **CONFIG_NET** configuration option. | |
3577 | * Return | |
3578 | * Pointer to **struct bpf_sock**, or **NULL** in case of failure. | |
3579 | * For sockets with reuseport option, the **struct bpf_sock** | |
c1fe1e70 QM |
3580 | * result is from *reuse*\ **->socks**\ [] using the hash of the |
3581 | * tuple. | |
253c8dde | 3582 | * |
c0df236e | 3583 | * long bpf_tcp_check_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) |
253c8dde | 3584 | * Description |
c1fe1e70 QM |
3585 | * Check whether *iph* and *th* contain a valid SYN cookie ACK for |
3586 | * the listening socket in *sk*. | |
253c8dde | 3587 | * |
c1fe1e70 QM |
3588 | * *iph* points to the start of the IPv4 or IPv6 header, while |
3589 | * *iph_len* contains **sizeof**\ (**struct iphdr**) or | |
3590 | * **sizeof**\ (**struct ip6hdr**). | |
253c8dde | 3591 | * |
c1fe1e70 QM |
3592 | * *th* points to the start of the TCP header, while *th_len* |
3593 | * contains **sizeof**\ (**struct tcphdr**). | |
253c8dde | 3594 | * Return |
c1fe1e70 QM |
3595 | * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative |
3596 | * error otherwise. | |
196398d4 | 3597 | * |
bdb7b79b | 3598 | * long bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags) |
196398d4 AI |
3599 | * Description |
3600 | * Get name of sysctl in /proc/sys/ and copy it into provided by | |
3601 | * program buffer *buf* of size *buf_len*. | |
3602 | * | |
3603 | * The buffer is always NUL terminated, unless it's zero-sized. | |
3604 | * | |
3605 | * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is | |
3606 | * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name | |
3607 | * only (e.g. "tcp_mem"). | |
3608 | * Return | |
3609 | * Number of character copied (not including the trailing NUL). | |
3610 | * | |
3611 | * **-E2BIG** if the buffer wasn't big enough (*buf* will contain | |
3612 | * truncated name in this case). | |
3613 | * | |
bdb7b79b | 3614 | * long bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) |
196398d4 AI |
3615 | * Description |
3616 | * Get current value of sysctl as it is presented in /proc/sys | |
3617 | * (incl. newline, etc), and copy it as a string into provided | |
3618 | * by program buffer *buf* of size *buf_len*. | |
3619 | * | |
3620 | * The whole value is copied, no matter what file position user | |
3621 | * space issued e.g. sys_read at. | |
3622 | * | |
3623 | * The buffer is always NUL terminated, unless it's zero-sized. | |
3624 | * Return | |
3625 | * Number of character copied (not including the trailing NUL). | |
3626 | * | |
3627 | * **-E2BIG** if the buffer wasn't big enough (*buf* will contain | |
3628 | * truncated name in this case). | |
3629 | * | |
3630 | * **-EINVAL** if current value was unavailable, e.g. because | |
3631 | * sysctl is uninitialized and read returns -EIO for it. | |
3632 | * | |
bdb7b79b | 3633 | * long bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) |
196398d4 AI |
3634 | * Description |
3635 | * Get new value being written by user space to sysctl (before | |
3636 | * the actual write happens) and copy it as a string into | |
3637 | * provided by program buffer *buf* of size *buf_len*. | |
3638 | * | |
3639 | * User space may write new value at file position > 0. | |
3640 | * | |
3641 | * The buffer is always NUL terminated, unless it's zero-sized. | |
3642 | * Return | |
3643 | * Number of character copied (not including the trailing NUL). | |
3644 | * | |
3645 | * **-E2BIG** if the buffer wasn't big enough (*buf* will contain | |
3646 | * truncated name in this case). | |
3647 | * | |
3648 | * **-EINVAL** if sysctl is being read. | |
3649 | * | |
bdb7b79b | 3650 | * long bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len) |
196398d4 AI |
3651 | * Description |
3652 | * Override new value being written by user space to sysctl with | |
3653 | * value provided by program in buffer *buf* of size *buf_len*. | |
3654 | * | |
3655 | * *buf* should contain a string in same form as provided by user | |
3656 | * space on sysctl write. | |
3657 | * | |
3658 | * User space may write new value at file position > 0. To override | |
3659 | * the whole sysctl value file position should be set to zero. | |
3660 | * Return | |
3661 | * 0 on success. | |
3662 | * | |
3663 | * **-E2BIG** if the *buf_len* is too big. | |
3664 | * | |
3665 | * **-EINVAL** if sysctl is being read. | |
b457e553 | 3666 | * |
bdb7b79b | 3667 | * long bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res) |
b457e553 AI |
3668 | * Description |
3669 | * Convert the initial part of the string from buffer *buf* of | |
3670 | * size *buf_len* to a long integer according to the given base | |
3671 | * and save the result in *res*. | |
3672 | * | |
3673 | * The string may begin with an arbitrary amount of white space | |
c1fe1e70 QM |
3674 | * (as determined by **isspace**\ (3)) followed by a single |
3675 | * optional '**-**' sign. | |
b457e553 AI |
3676 | * |
3677 | * Five least significant bits of *flags* encode base, other bits | |
3678 | * are currently unused. | |
3679 | * | |
3680 | * Base must be either 8, 10, 16 or 0 to detect it automatically | |
c1fe1e70 | 3681 | * similar to user space **strtol**\ (3). |
b457e553 AI |
3682 | * Return |
3683 | * Number of characters consumed on success. Must be positive but | |
c1fe1e70 | 3684 | * no more than *buf_len*. |
b457e553 AI |
3685 | * |
3686 | * **-EINVAL** if no valid digits were found or unsupported base | |
3687 | * was provided. | |
3688 | * | |
3689 | * **-ERANGE** if resulting value was out of range. | |
3690 | * | |
bdb7b79b | 3691 | * long bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res) |
b457e553 AI |
3692 | * Description |
3693 | * Convert the initial part of the string from buffer *buf* of | |
3694 | * size *buf_len* to an unsigned long integer according to the | |
3695 | * given base and save the result in *res*. | |
3696 | * | |
3697 | * The string may begin with an arbitrary amount of white space | |
c1fe1e70 | 3698 | * (as determined by **isspace**\ (3)). |
b457e553 AI |
3699 | * |
3700 | * Five least significant bits of *flags* encode base, other bits | |
3701 | * are currently unused. | |
3702 | * | |
3703 | * Base must be either 8, 10, 16 or 0 to detect it automatically | |
c1fe1e70 | 3704 | * similar to user space **strtoul**\ (3). |
b457e553 AI |
3705 | * Return |
3706 | * Number of characters consumed on success. Must be positive but | |
c1fe1e70 | 3707 | * no more than *buf_len*. |
b457e553 AI |
3708 | * |
3709 | * **-EINVAL** if no valid digits were found or unsupported base | |
3710 | * was provided. | |
3711 | * | |
3712 | * **-ERANGE** if resulting value was out of range. | |
948d930e | 3713 | * |
30897832 | 3714 | * void *bpf_sk_storage_get(struct bpf_map *map, void *sk, void *value, u64 flags) |
948d930e | 3715 | * Description |
c1fe1e70 | 3716 | * Get a bpf-local-storage from a *sk*. |
948d930e MKL |
3717 | * |
3718 | * Logically, it could be thought of getting the value from | |
3719 | * a *map* with *sk* as the **key**. From this | |
3720 | * perspective, the usage is not much different from | |
c1fe1e70 QM |
3721 | * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this |
3722 | * helper enforces the key must be a full socket and the map must | |
3723 | * be a **BPF_MAP_TYPE_SK_STORAGE** also. | |
948d930e MKL |
3724 | * |
3725 | * Underneath, the value is stored locally at *sk* instead of | |
c1fe1e70 QM |
3726 | * the *map*. The *map* is used as the bpf-local-storage |
3727 | * "type". The bpf-local-storage "type" (i.e. the *map*) is | |
3728 | * searched against all bpf-local-storages residing at *sk*. | |
948d930e | 3729 | * |
30897832 KS |
3730 | * *sk* is a kernel **struct sock** pointer for LSM program. |
3731 | * *sk* is a **struct bpf_sock** pointer for other program types. | |
3732 | * | |
c1fe1e70 | 3733 | * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be |
948d930e MKL |
3734 | * used such that a new bpf-local-storage will be |
3735 | * created if one does not exist. *value* can be used | |
c1fe1e70 | 3736 | * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify |
948d930e | 3737 | * the initial value of a bpf-local-storage. If *value* is |
c1fe1e70 | 3738 | * **NULL**, the new bpf-local-storage will be zero initialized. |
948d930e MKL |
3739 | * Return |
3740 | * A bpf-local-storage pointer is returned on success. | |
3741 | * | |
3742 | * **NULL** if not found or there was an error in adding | |
3743 | * a new bpf-local-storage. | |
3744 | * | |
30897832 | 3745 | * long bpf_sk_storage_delete(struct bpf_map *map, void *sk) |
948d930e | 3746 | * Description |
c1fe1e70 | 3747 | * Delete a bpf-local-storage from a *sk*. |
948d930e MKL |
3748 | * Return |
3749 | * 0 on success. | |
3750 | * | |
3751 | * **-ENOENT** if the bpf-local-storage cannot be found. | |
592a3498 | 3752 | * **-EINVAL** if sk is not a fullsock (e.g. a request_sock). |
edaccf89 | 3753 | * |
bdb7b79b | 3754 | * long bpf_send_signal(u32 sig) |
edaccf89 | 3755 | * Description |
8482941f YS |
3756 | * Send signal *sig* to the process of the current task. |
3757 | * The signal may be delivered to any of this process's threads. | |
edaccf89 YS |
3758 | * Return |
3759 | * 0 on success or successfully queued. | |
3760 | * | |
3761 | * **-EBUSY** if work queue under nmi is full. | |
3762 | * | |
3763 | * **-EINVAL** if *sig* is invalid. | |
3764 | * | |
3765 | * **-EPERM** if no permission to send the *sig*. | |
3766 | * | |
3767 | * **-EAGAIN** if bpf program can try again. | |
3745ee18 | 3768 | * |
c0df236e | 3769 | * s64 bpf_tcp_gen_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) |
3745ee18 PP |
3770 | * Description |
3771 | * Try to issue a SYN cookie for the packet with corresponding | |
3772 | * IP/TCP headers, *iph* and *th*, on the listening socket in *sk*. | |
3773 | * | |
3774 | * *iph* points to the start of the IPv4 or IPv6 header, while | |
3775 | * *iph_len* contains **sizeof**\ (**struct iphdr**) or | |
3776 | * **sizeof**\ (**struct ip6hdr**). | |
3777 | * | |
3778 | * *th* points to the start of the TCP header, while *th_len* | |
3779 | * contains the length of the TCP header. | |
3745ee18 PP |
3780 | * Return |
3781 | * On success, lower 32 bits hold the generated SYN cookie in | |
3782 | * followed by 16 bits which hold the MSS value for that cookie, | |
3783 | * and the top 16 bits are unused. | |
3784 | * | |
3785 | * On failure, the returned value is one of the following: | |
3786 | * | |
3787 | * **-EINVAL** SYN cookie cannot be issued due to error | |
3788 | * | |
3789 | * **-ENOENT** SYN cookie should not be issued (no SYN flood) | |
3790 | * | |
3791 | * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies | |
3792 | * | |
3793 | * **-EPROTONOSUPPORT** IP packet version is not 4 or 6 | |
a7658e1a | 3794 | * |
bdb7b79b | 3795 | * long bpf_skb_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) |
a7658e1a AS |
3796 | * Description |
3797 | * Write raw *data* blob into a special BPF perf event held by | |
3798 | * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf | |
3799 | * event must have the following attributes: **PERF_SAMPLE_RAW** | |
3800 | * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and | |
3801 | * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. | |
3802 | * | |
3803 | * The *flags* are used to indicate the index in *map* for which | |
3804 | * the value must be put, masked with **BPF_F_INDEX_MASK**. | |
3805 | * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** | |
3806 | * to indicate that the index of the current CPU core should be | |
3807 | * used. | |
3808 | * | |
3809 | * The value to write, of *size*, is passed through eBPF stack and | |
3810 | * pointed by *data*. | |
3811 | * | |
3812 | * *ctx* is a pointer to in-kernel struct sk_buff. | |
3813 | * | |
3814 | * This helper is similar to **bpf_perf_event_output**\ () but | |
3815 | * restricted to raw_tracepoint bpf programs. | |
3816 | * Return | |
3817 | * 0 on success, or a negative error in case of failure. | |
6ae08ae3 | 3818 | * |
bdb7b79b | 3819 | * long bpf_probe_read_user(void *dst, u32 size, const void *unsafe_ptr) |
6ae08ae3 DB |
3820 | * Description |
3821 | * Safely attempt to read *size* bytes from user space address | |
3822 | * *unsafe_ptr* and store the data in *dst*. | |
3823 | * Return | |
3824 | * 0 on success, or a negative error in case of failure. | |
3825 | * | |
bdb7b79b | 3826 | * long bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr) |
6ae08ae3 DB |
3827 | * Description |
3828 | * Safely attempt to read *size* bytes from kernel space address | |
3829 | * *unsafe_ptr* and store the data in *dst*. | |
3830 | * Return | |
3831 | * 0 on success, or a negative error in case of failure. | |
3832 | * | |
bdb7b79b | 3833 | * long bpf_probe_read_user_str(void *dst, u32 size, const void *unsafe_ptr) |
6ae08ae3 DB |
3834 | * Description |
3835 | * Copy a NUL terminated string from an unsafe user address | |
3836 | * *unsafe_ptr* to *dst*. The *size* should include the | |
3837 | * terminating NUL byte. In case the string length is smaller than | |
3838 | * *size*, the target is not padded with further NUL bytes. If the | |
3839 | * string length is larger than *size*, just *size*-1 bytes are | |
3840 | * copied and the last byte is set to NUL. | |
3841 | * | |
c6458e72 BJ |
3842 | * On success, returns the number of bytes that were written, |
3843 | * including the terminal NUL. This makes this helper useful in | |
3844 | * tracing programs for reading strings, and more importantly to | |
3845 | * get its length at runtime. See the following snippet: | |
6ae08ae3 DB |
3846 | * |
3847 | * :: | |
3848 | * | |
3849 | * SEC("kprobe/sys_open") | |
3850 | * void bpf_sys_open(struct pt_regs *ctx) | |
3851 | * { | |
3852 | * char buf[PATHLEN]; // PATHLEN is defined to 256 | |
3853 | * int res = bpf_probe_read_user_str(buf, sizeof(buf), | |
3854 | * ctx->di); | |
3855 | * | |
3856 | * // Consume buf, for example push it to | |
3857 | * // userspace via bpf_perf_event_output(); we | |
3858 | * // can use res (the string length) as event | |
3859 | * // size, after checking its boundaries. | |
3860 | * } | |
3861 | * | |
ff20460e | 3862 | * In comparison, using **bpf_probe_read_user**\ () helper here |
6ae08ae3 DB |
3863 | * instead to read the string would require to estimate the length |
3864 | * at compile time, and would often result in copying more memory | |
3865 | * than necessary. | |
3866 | * | |
3867 | * Another useful use case is when parsing individual process | |
3868 | * arguments or individual environment variables navigating | |
3869 | * *current*\ **->mm->arg_start** and *current*\ | |
3870 | * **->mm->env_start**: using this helper and the return value, | |
3871 | * one can quickly iterate at the right offset of the memory area. | |
3872 | * Return | |
c6458e72 | 3873 | * On success, the strictly positive length of the output string, |
6ae08ae3 DB |
3874 | * including the trailing NUL character. On error, a negative |
3875 | * value. | |
3876 | * | |
bdb7b79b | 3877 | * long bpf_probe_read_kernel_str(void *dst, u32 size, const void *unsafe_ptr) |
6ae08ae3 DB |
3878 | * Description |
3879 | * Copy a NUL terminated string from an unsafe kernel address *unsafe_ptr* | |
ff20460e | 3880 | * to *dst*. Same semantics as with **bpf_probe_read_user_str**\ () apply. |
6ae08ae3 | 3881 | * Return |
ff20460e | 3882 | * On success, the strictly positive length of the string, including |
6ae08ae3 | 3883 | * the trailing NUL character. On error, a negative value. |
17328d61 | 3884 | * |
bdb7b79b | 3885 | * long bpf_tcp_send_ack(void *tp, u32 rcv_nxt) |
17328d61 | 3886 | * Description |
ff20460e | 3887 | * Send out a tcp-ack. *tp* is the in-kernel struct **tcp_sock**. |
17328d61 MKL |
3888 | * *rcv_nxt* is the ack_seq to be sent out. |
3889 | * Return | |
3890 | * 0 on success, or a negative error in case of failure. | |
3891 | * | |
bdb7b79b | 3892 | * long bpf_send_signal_thread(u32 sig) |
8482941f YS |
3893 | * Description |
3894 | * Send signal *sig* to the thread corresponding to the current task. | |
3895 | * Return | |
3896 | * 0 on success or successfully queued. | |
3897 | * | |
3898 | * **-EBUSY** if work queue under nmi is full. | |
3899 | * | |
3900 | * **-EINVAL** if *sig* is invalid. | |
3901 | * | |
3902 | * **-EPERM** if no permission to send the *sig*. | |
3903 | * | |
3904 | * **-EAGAIN** if bpf program can try again. | |
0a49c1a8 MKL |
3905 | * |
3906 | * u64 bpf_jiffies64(void) | |
3907 | * Description | |
3908 | * Obtain the 64bit jiffies | |
3909 | * Return | |
3910 | * The 64 bit jiffies | |
67306f84 | 3911 | * |
bdb7b79b | 3912 | * long bpf_read_branch_records(struct bpf_perf_event_data *ctx, void *buf, u32 size, u64 flags) |
67306f84 DX |
3913 | * Description |
3914 | * For an eBPF program attached to a perf event, retrieve the | |
ff20460e QM |
3915 | * branch records (**struct perf_branch_entry**) associated to *ctx* |
3916 | * and store it in the buffer pointed by *buf* up to size | |
67306f84 DX |
3917 | * *size* bytes. |
3918 | * Return | |
3919 | * On success, number of bytes written to *buf*. On error, a | |
3920 | * negative value. | |
3921 | * | |
3922 | * The *flags* can be set to **BPF_F_GET_BRANCH_RECORDS_SIZE** to | |
ff20460e | 3923 | * instead return the number of bytes required to store all the |
67306f84 DX |
3924 | * branch entries. If this flag is set, *buf* may be NULL. |
3925 | * | |
3926 | * **-EINVAL** if arguments invalid or **size** not a multiple | |
ff20460e | 3927 | * of **sizeof**\ (**struct perf_branch_entry**\ ). |
67306f84 DX |
3928 | * |
3929 | * **-ENOENT** if architecture does not support branch records. | |
b4490c5c | 3930 | * |
bdb7b79b | 3931 | * long bpf_get_ns_current_pid_tgid(u64 dev, u64 ino, struct bpf_pidns_info *nsdata, u32 size) |
b4490c5c CN |
3932 | * Description |
3933 | * Returns 0 on success, values for *pid* and *tgid* as seen from the current | |
3934 | * *namespace* will be returned in *nsdata*. | |
ff20460e QM |
3935 | * Return |
3936 | * 0 on success, or one of the following in case of failure: | |
b4490c5c CN |
3937 | * |
3938 | * **-EINVAL** if dev and inum supplied don't match dev_t and inode number | |
3939 | * with nsfs of current task, or if dev conversion to dev_t lost high bits. | |
3940 | * | |
3941 | * **-ENOENT** if pidns does not exists for the current task. | |
3942 | * | |
bdb7b79b | 3943 | * long bpf_xdp_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) |
d831ee84 EC |
3944 | * Description |
3945 | * Write raw *data* blob into a special BPF perf event held by | |
3946 | * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf | |
3947 | * event must have the following attributes: **PERF_SAMPLE_RAW** | |
3948 | * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and | |
3949 | * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. | |
3950 | * | |
3951 | * The *flags* are used to indicate the index in *map* for which | |
3952 | * the value must be put, masked with **BPF_F_INDEX_MASK**. | |
3953 | * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** | |
3954 | * to indicate that the index of the current CPU core should be | |
3955 | * used. | |
3956 | * | |
3957 | * The value to write, of *size*, is passed through eBPF stack and | |
3958 | * pointed by *data*. | |
3959 | * | |
3960 | * *ctx* is a pointer to in-kernel struct xdp_buff. | |
3961 | * | |
3962 | * This helper is similar to **bpf_perf_eventoutput**\ () but | |
3963 | * restricted to raw_tracepoint bpf programs. | |
3964 | * Return | |
3965 | * 0 on success, or a negative error in case of failure. | |
f318903c DB |
3966 | * |
3967 | * u64 bpf_get_netns_cookie(void *ctx) | |
3968 | * Description | |
3969 | * Retrieve the cookie (generated by the kernel) of the network | |
3970 | * namespace the input *ctx* is associated with. The network | |
3971 | * namespace cookie remains stable for its lifetime and provides | |
3972 | * a global identifier that can be assumed unique. If *ctx* is | |
3973 | * NULL, then the helper returns the cookie for the initial | |
3974 | * network namespace. The cookie itself is very similar to that | |
ff20460e QM |
3975 | * of **bpf_get_socket_cookie**\ () helper, but for network |
3976 | * namespaces instead of sockets. | |
f318903c DB |
3977 | * Return |
3978 | * A 8-byte long opaque number. | |
0f09abd1 DB |
3979 | * |
3980 | * u64 bpf_get_current_ancestor_cgroup_id(int ancestor_level) | |
3981 | * Description | |
3982 | * Return id of cgroup v2 that is ancestor of the cgroup associated | |
3983 | * with the current task at the *ancestor_level*. The root cgroup | |
3984 | * is at *ancestor_level* zero and each step down the hierarchy | |
3985 | * increments the level. If *ancestor_level* == level of cgroup | |
3986 | * associated with the current task, then return value will be the | |
3987 | * same as that of **bpf_get_current_cgroup_id**\ (). | |
3988 | * | |
3989 | * The helper is useful to implement policies based on cgroups | |
3990 | * that are upper in hierarchy than immediate cgroup associated | |
3991 | * with the current task. | |
3992 | * | |
3993 | * The format of returned id and helper limitations are same as in | |
3994 | * **bpf_get_current_cgroup_id**\ (). | |
3995 | * Return | |
3996 | * The id is returned or 0 in case the id could not be retrieved. | |
cf7fbe66 | 3997 | * |
27e5203b | 3998 | * long bpf_sk_assign(struct sk_buff *skb, void *sk, u64 flags) |
cf7fbe66 | 3999 | * Description |
a352b32a JS |
4000 | * Helper is overloaded depending on BPF program type. This |
4001 | * description applies to **BPF_PROG_TYPE_SCHED_CLS** and | |
4002 | * **BPF_PROG_TYPE_SCHED_ACT** programs. | |
4003 | * | |
cf7fbe66 JS |
4004 | * Assign the *sk* to the *skb*. When combined with appropriate |
4005 | * routing configuration to receive the packet towards the socket, | |
4006 | * will cause *skb* to be delivered to the specified socket. | |
4007 | * Subsequent redirection of *skb* via **bpf_redirect**\ (), | |
4008 | * **bpf_clone_redirect**\ () or other methods outside of BPF may | |
4009 | * interfere with successful delivery to the socket. | |
4010 | * | |
4011 | * This operation is only valid from TC ingress path. | |
4012 | * | |
4013 | * The *flags* argument must be zero. | |
4014 | * Return | |
ff20460e | 4015 | * 0 on success, or a negative error in case of failure: |
cf7fbe66 | 4016 | * |
ff20460e QM |
4017 | * **-EINVAL** if specified *flags* are not supported. |
4018 | * | |
4019 | * **-ENOENT** if the socket is unavailable for assignment. | |
4020 | * | |
4021 | * **-ENETUNREACH** if the socket is unreachable (wrong netns). | |
4022 | * | |
4023 | * **-EOPNOTSUPP** if the operation is not supported, for example | |
4024 | * a call from outside of TC ingress. | |
4025 | * | |
4026 | * **-ESOCKTNOSUPPORT** if the socket type is not supported | |
4027 | * (reuseport). | |
71d19214 | 4028 | * |
a352b32a JS |
4029 | * long bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags) |
4030 | * Description | |
4031 | * Helper is overloaded depending on BPF program type. This | |
4032 | * description applies to **BPF_PROG_TYPE_SK_LOOKUP** programs. | |
4033 | * | |
4034 | * Select the *sk* as a result of a socket lookup. | |
4035 | * | |
4036 | * For the operation to succeed passed socket must be compatible | |
4037 | * with the packet description provided by the *ctx* object. | |
4038 | * | |
4039 | * L4 protocol (**IPPROTO_TCP** or **IPPROTO_UDP**) must | |
4040 | * be an exact match. While IP family (**AF_INET** or | |
4041 | * **AF_INET6**) must be compatible, that is IPv6 sockets | |
4042 | * that are not v6-only can be selected for IPv4 packets. | |
4043 | * | |
4044 | * Only TCP listeners and UDP unconnected sockets can be | |
4045 | * selected. *sk* can also be NULL to reset any previous | |
4046 | * selection. | |
4047 | * | |
4048 | * *flags* argument can combination of following values: | |
4049 | * | |
4050 | * * **BPF_SK_LOOKUP_F_REPLACE** to override the previous | |
4051 | * socket selection, potentially done by a BPF program | |
4052 | * that ran before us. | |
4053 | * | |
4054 | * * **BPF_SK_LOOKUP_F_NO_REUSEPORT** to skip | |
4055 | * load-balancing within reuseport group for the socket | |
4056 | * being selected. | |
4057 | * | |
4058 | * On success *ctx->sk* will point to the selected socket. | |
4059 | * | |
4060 | * Return | |
4061 | * 0 on success, or a negative errno in case of failure. | |
4062 | * | |
4063 | * * **-EAFNOSUPPORT** if socket family (*sk->family*) is | |
4064 | * not compatible with packet family (*ctx->family*). | |
4065 | * | |
4066 | * * **-EEXIST** if socket has been already selected, | |
4067 | * potentially by another program, and | |
4068 | * **BPF_SK_LOOKUP_F_REPLACE** flag was not specified. | |
4069 | * | |
4070 | * * **-EINVAL** if unsupported flags were specified. | |
4071 | * | |
4072 | * * **-EPROTOTYPE** if socket L4 protocol | |
4073 | * (*sk->protocol*) doesn't match packet protocol | |
4074 | * (*ctx->protocol*). | |
4075 | * | |
4076 | * * **-ESOCKTNOSUPPORT** if socket is not in allowed | |
4077 | * state (TCP listening or UDP unconnected). | |
4078 | * | |
71d19214 MŻ |
4079 | * u64 bpf_ktime_get_boot_ns(void) |
4080 | * Description | |
4081 | * Return the time elapsed since system boot, in nanoseconds. | |
4082 | * Does include the time the system was suspended. | |
ff20460e | 4083 | * See: **clock_gettime**\ (**CLOCK_BOOTTIME**) |
71d19214 MŻ |
4084 | * Return |
4085 | * Current *ktime*. | |
492e639f | 4086 | * |
bdb7b79b | 4087 | * long bpf_seq_printf(struct seq_file *m, const char *fmt, u32 fmt_size, const void *data, u32 data_len) |
492e639f | 4088 | * Description |
ff20460e QM |
4089 | * **bpf_seq_printf**\ () uses seq_file **seq_printf**\ () to print |
4090 | * out the format string. | |
492e639f YS |
4091 | * The *m* represents the seq_file. The *fmt* and *fmt_size* are for |
4092 | * the format string itself. The *data* and *data_len* are format string | |
ff20460e | 4093 | * arguments. The *data* are a **u64** array and corresponding format string |
492e639f YS |
4094 | * values are stored in the array. For strings and pointers where pointees |
4095 | * are accessed, only the pointer values are stored in the *data* array. | |
a42effb0 | 4096 | * The *data_len* is the size of *data* in bytes - must be a multiple of 8. |
492e639f YS |
4097 | * |
4098 | * Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory. | |
4099 | * Reading kernel memory may fail due to either invalid address or | |
4100 | * valid address but requiring a major memory fault. If reading kernel memory | |
4101 | * fails, the string for **%s** will be an empty string, and the ip | |
4102 | * address for **%p{i,I}{4,6}** will be 0. Not returning error to | |
ff20460e | 4103 | * bpf program is consistent with what **bpf_trace_printk**\ () does for now. |
492e639f | 4104 | * Return |
ff20460e QM |
4105 | * 0 on success, or a negative error in case of failure: |
4106 | * | |
4107 | * **-EBUSY** if per-CPU memory copy buffer is busy, can try again | |
4108 | * by returning 1 from bpf program. | |
4109 | * | |
4110 | * **-EINVAL** if arguments are invalid, or if *fmt* is invalid/unsupported. | |
4111 | * | |
4112 | * **-E2BIG** if *fmt* contains too many format specifiers. | |
492e639f | 4113 | * |
ff20460e | 4114 | * **-EOVERFLOW** if an overflow happened: The same object will be tried again. |
492e639f | 4115 | * |
bdb7b79b | 4116 | * long bpf_seq_write(struct seq_file *m, const void *data, u32 len) |
492e639f | 4117 | * Description |
ff20460e | 4118 | * **bpf_seq_write**\ () uses seq_file **seq_write**\ () to write the data. |
492e639f | 4119 | * The *m* represents the seq_file. The *data* and *len* represent the |
ff20460e | 4120 | * data to write in bytes. |
492e639f | 4121 | * Return |
ff20460e | 4122 | * 0 on success, or a negative error in case of failure: |
492e639f | 4123 | * |
ff20460e | 4124 | * **-EOVERFLOW** if an overflow happened: The same object will be tried again. |
f307fa2c | 4125 | * |
a5fa25ad | 4126 | * u64 bpf_sk_cgroup_id(void *sk) |
f307fa2c AI |
4127 | * Description |
4128 | * Return the cgroup v2 id of the socket *sk*. | |
4129 | * | |
a5fa25ad | 4130 | * *sk* must be a non-**NULL** pointer to a socket, e.g. one |
f307fa2c AI |
4131 | * returned from **bpf_sk_lookup_xxx**\ (), |
4132 | * **bpf_sk_fullsock**\ (), etc. The format of returned id is | |
4133 | * same as in **bpf_skb_cgroup_id**\ (). | |
4134 | * | |
4135 | * This helper is available only if the kernel was compiled with | |
4136 | * the **CONFIG_SOCK_CGROUP_DATA** configuration option. | |
4137 | * Return | |
4138 | * The id is returned or 0 in case the id could not be retrieved. | |
4139 | * | |
a5fa25ad | 4140 | * u64 bpf_sk_ancestor_cgroup_id(void *sk, int ancestor_level) |
f307fa2c AI |
4141 | * Description |
4142 | * Return id of cgroup v2 that is ancestor of cgroup associated | |
4143 | * with the *sk* at the *ancestor_level*. The root cgroup is at | |
4144 | * *ancestor_level* zero and each step down the hierarchy | |
4145 | * increments the level. If *ancestor_level* == level of cgroup | |
4146 | * associated with *sk*, then return value will be same as that | |
4147 | * of **bpf_sk_cgroup_id**\ (). | |
4148 | * | |
4149 | * The helper is useful to implement policies based on cgroups | |
4150 | * that are upper in hierarchy than immediate cgroup associated | |
4151 | * with *sk*. | |
4152 | * | |
4153 | * The format of returned id and helper limitations are same as in | |
4154 | * **bpf_sk_cgroup_id**\ (). | |
4155 | * Return | |
4156 | * The id is returned or 0 in case the id could not be retrieved. | |
457f4436 | 4157 | * |
e1613b57 | 4158 | * long bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags) |
457f4436 AN |
4159 | * Description |
4160 | * Copy *size* bytes from *data* into a ring buffer *ringbuf*. | |
bcc7f554 QM |
4161 | * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification |
4162 | * of new data availability is sent. | |
4163 | * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification | |
4164 | * of new data availability is sent unconditionally. | |
5c507329 PT |
4165 | * If **0** is specified in *flags*, an adaptive notification |
4166 | * of new data availability is sent. | |
4167 | * | |
4168 | * An adaptive notification is a notification sent whenever the user-space | |
4169 | * process has caught up and consumed all available payloads. In case the user-space | |
4170 | * process is still processing a previous payload, then no notification is needed | |
4171 | * as it will process the newly added payload automatically. | |
457f4436 | 4172 | * Return |
bcc7f554 | 4173 | * 0 on success, or a negative error in case of failure. |
457f4436 AN |
4174 | * |
4175 | * void *bpf_ringbuf_reserve(void *ringbuf, u64 size, u64 flags) | |
4176 | * Description | |
4177 | * Reserve *size* bytes of payload in a ring buffer *ringbuf*. | |
5c507329 | 4178 | * *flags* must be 0. |
457f4436 AN |
4179 | * Return |
4180 | * Valid pointer with *size* bytes of memory available; NULL, | |
4181 | * otherwise. | |
4182 | * | |
4183 | * void bpf_ringbuf_submit(void *data, u64 flags) | |
4184 | * Description | |
4185 | * Submit reserved ring buffer sample, pointed to by *data*. | |
bcc7f554 QM |
4186 | * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification |
4187 | * of new data availability is sent. | |
4188 | * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification | |
4189 | * of new data availability is sent unconditionally. | |
5c507329 PT |
4190 | * If **0** is specified in *flags*, an adaptive notification |
4191 | * of new data availability is sent. | |
4192 | * | |
4193 | * See 'bpf_ringbuf_output()' for the definition of adaptive notification. | |
457f4436 AN |
4194 | * Return |
4195 | * Nothing. Always succeeds. | |
4196 | * | |
4197 | * void bpf_ringbuf_discard(void *data, u64 flags) | |
4198 | * Description | |
4199 | * Discard reserved ring buffer sample, pointed to by *data*. | |
bcc7f554 QM |
4200 | * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification |
4201 | * of new data availability is sent. | |
4202 | * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification | |
4203 | * of new data availability is sent unconditionally. | |
5c507329 PT |
4204 | * If **0** is specified in *flags*, an adaptive notification |
4205 | * of new data availability is sent. | |
4206 | * | |
4207 | * See 'bpf_ringbuf_output()' for the definition of adaptive notification. | |
457f4436 AN |
4208 | * Return |
4209 | * Nothing. Always succeeds. | |
4210 | * | |
4211 | * u64 bpf_ringbuf_query(void *ringbuf, u64 flags) | |
4212 | * Description | |
4213 | * Query various characteristics of provided ring buffer. What | |
4214 | * exactly is queries is determined by *flags*: | |
bcc7f554 QM |
4215 | * |
4216 | * * **BPF_RB_AVAIL_DATA**: Amount of data not yet consumed. | |
4217 | * * **BPF_RB_RING_SIZE**: The size of ring buffer. | |
4218 | * * **BPF_RB_CONS_POS**: Consumer position (can wrap around). | |
4219 | * * **BPF_RB_PROD_POS**: Producer(s) position (can wrap around). | |
4220 | * | |
4221 | * Data returned is just a momentary snapshot of actual values | |
457f4436 AN |
4222 | * and could be inaccurate, so this facility should be used to |
4223 | * power heuristics and for reporting, not to make 100% correct | |
4224 | * calculation. | |
4225 | * Return | |
bcc7f554 | 4226 | * Requested value, or 0, if *flags* are not recognized. |
7cdec54f | 4227 | * |
bdb7b79b | 4228 | * long bpf_csum_level(struct sk_buff *skb, u64 level) |
7cdec54f DB |
4229 | * Description |
4230 | * Change the skbs checksum level by one layer up or down, or | |
4231 | * reset it entirely to none in order to have the stack perform | |
4232 | * checksum validation. The level is applicable to the following | |
4233 | * protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of | |
4234 | * | ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP | | |
4235 | * through **bpf_skb_adjust_room**\ () helper with passing in | |
4236 | * **BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one call | |
4237 | * to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since | |
4238 | * the UDP header is removed. Similarly, an encap of the latter | |
4239 | * into the former could be accompanied by a helper call to | |
4240 | * **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the | |
4241 | * skb is still intended to be processed in higher layers of the | |
4242 | * stack instead of just egressing at tc. | |
4243 | * | |
4244 | * There are three supported level settings at this time: | |
4245 | * | |
4246 | * * **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs | |
4247 | * with CHECKSUM_UNNECESSARY. | |
4248 | * * **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs | |
4249 | * with CHECKSUM_UNNECESSARY. | |
4250 | * * **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and | |
4251 | * sets CHECKSUM_NONE to force checksum validation by the stack. | |
4252 | * * **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current | |
4253 | * skb->csum_level. | |
4254 | * Return | |
4255 | * 0 on success, or a negative error in case of failure. In the | |
4256 | * case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level | |
4257 | * is returned or the error code -EACCES in case the skb is not | |
4258 | * subject to CHECKSUM_UNNECESSARY. | |
af7ec138 YS |
4259 | * |
4260 | * struct tcp6_sock *bpf_skc_to_tcp6_sock(void *sk) | |
4261 | * Description | |
4262 | * Dynamically cast a *sk* pointer to a *tcp6_sock* pointer. | |
4263 | * Return | |
bc0b5a03 | 4264 | * *sk* if casting is valid, or **NULL** otherwise. |
478cfbdf YS |
4265 | * |
4266 | * struct tcp_sock *bpf_skc_to_tcp_sock(void *sk) | |
4267 | * Description | |
4268 | * Dynamically cast a *sk* pointer to a *tcp_sock* pointer. | |
4269 | * Return | |
bc0b5a03 | 4270 | * *sk* if casting is valid, or **NULL** otherwise. |
478cfbdf YS |
4271 | * |
4272 | * struct tcp_timewait_sock *bpf_skc_to_tcp_timewait_sock(void *sk) | |
4273 | * Description | |
4274 | * Dynamically cast a *sk* pointer to a *tcp_timewait_sock* pointer. | |
4275 | * Return | |
bc0b5a03 | 4276 | * *sk* if casting is valid, or **NULL** otherwise. |
478cfbdf YS |
4277 | * |
4278 | * struct tcp_request_sock *bpf_skc_to_tcp_request_sock(void *sk) | |
4279 | * Description | |
4280 | * Dynamically cast a *sk* pointer to a *tcp_request_sock* pointer. | |
4281 | * Return | |
bc0b5a03 | 4282 | * *sk* if casting is valid, or **NULL** otherwise. |
0d4fad3e YS |
4283 | * |
4284 | * struct udp6_sock *bpf_skc_to_udp6_sock(void *sk) | |
4285 | * Description | |
4286 | * Dynamically cast a *sk* pointer to a *udp6_sock* pointer. | |
4287 | * Return | |
bc0b5a03 | 4288 | * *sk* if casting is valid, or **NULL** otherwise. |
fa28dcb8 SL |
4289 | * |
4290 | * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags) | |
4291 | * Description | |
4292 | * Return a user or a kernel stack in bpf program provided buffer. | |
4293 | * To achieve this, the helper needs *task*, which is a valid | |
bc0b5a03 QM |
4294 | * pointer to **struct task_struct**. To store the stacktrace, the |
4295 | * bpf program provides *buf* with a nonnegative *size*. | |
fa28dcb8 SL |
4296 | * |
4297 | * The last argument, *flags*, holds the number of stack frames to | |
4298 | * skip (from 0 to 255), masked with | |
4299 | * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set | |
4300 | * the following flags: | |
4301 | * | |
4302 | * **BPF_F_USER_STACK** | |
4303 | * Collect a user space stack instead of a kernel stack. | |
4304 | * **BPF_F_USER_BUILD_ID** | |
4305 | * Collect buildid+offset instead of ips for user stack, | |
4306 | * only valid if **BPF_F_USER_STACK** is also specified. | |
4307 | * | |
4308 | * **bpf_get_task_stack**\ () can collect up to | |
4309 | * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject | |
4310 | * to sufficient large buffer size. Note that | |
4311 | * this limit can be controlled with the **sysctl** program, and | |
4312 | * that it should be manually increased in order to profile long | |
4313 | * user stacks (such as stacks for Java programs). To do so, use: | |
4314 | * | |
4315 | * :: | |
4316 | * | |
4317 | * # sysctl kernel.perf_event_max_stack=<new value> | |
4318 | * Return | |
98870605 GT |
4319 | * The non-negative copied *buf* length equal to or less than |
4320 | * *size* on success, or a negative error in case of failure. | |
fa28dcb8 | 4321 | * |
0813a841 MKL |
4322 | * long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags) |
4323 | * Description | |
4324 | * Load header option. Support reading a particular TCP header | |
bc0b5a03 | 4325 | * option for bpf program (**BPF_PROG_TYPE_SOCK_OPS**). |
0813a841 MKL |
4326 | * |
4327 | * If *flags* is 0, it will search the option from the | |
bc0b5a03 | 4328 | * *skops*\ **->skb_data**. The comment in **struct bpf_sock_ops** |
0813a841 | 4329 | * has details on what skb_data contains under different |
bc0b5a03 | 4330 | * *skops*\ **->op**. |
0813a841 MKL |
4331 | * |
4332 | * The first byte of the *searchby_res* specifies the | |
4333 | * kind that it wants to search. | |
4334 | * | |
4335 | * If the searching kind is an experimental kind | |
4336 | * (i.e. 253 or 254 according to RFC6994). It also | |
4337 | * needs to specify the "magic" which is either | |
4338 | * 2 bytes or 4 bytes. It then also needs to | |
4339 | * specify the size of the magic by using | |
4340 | * the 2nd byte which is "kind-length" of a TCP | |
4341 | * header option and the "kind-length" also | |
4342 | * includes the first 2 bytes "kind" and "kind-length" | |
4343 | * itself as a normal TCP header option also does. | |
4344 | * | |
4345 | * For example, to search experimental kind 254 with | |
4346 | * 2 byte magic 0xeB9F, the searchby_res should be | |
4347 | * [ 254, 4, 0xeB, 0x9F, 0, 0, .... 0 ]. | |
4348 | * | |
4349 | * To search for the standard window scale option (3), | |
bc0b5a03 | 4350 | * the *searchby_res* should be [ 3, 0, 0, .... 0 ]. |
0813a841 MKL |
4351 | * Note, kind-length must be 0 for regular option. |
4352 | * | |
4353 | * Searching for No-Op (0) and End-of-Option-List (1) are | |
4354 | * not supported. | |
4355 | * | |
4356 | * *len* must be at least 2 bytes which is the minimal size | |
4357 | * of a header option. | |
4358 | * | |
4359 | * Supported flags: | |
bc0b5a03 | 4360 | * |
0813a841 MKL |
4361 | * * **BPF_LOAD_HDR_OPT_TCP_SYN** to search from the |
4362 | * saved_syn packet or the just-received syn packet. | |
4363 | * | |
4364 | * Return | |
bc0b5a03 QM |
4365 | * > 0 when found, the header option is copied to *searchby_res*. |
4366 | * The return value is the total length copied. On failure, a | |
4367 | * negative error code is returned: | |
0813a841 | 4368 | * |
bc0b5a03 | 4369 | * **-EINVAL** if a parameter is invalid. |
0813a841 | 4370 | * |
bc0b5a03 | 4371 | * **-ENOMSG** if the option is not found. |
0813a841 | 4372 | * |
bc0b5a03 QM |
4373 | * **-ENOENT** if no syn packet is available when |
4374 | * **BPF_LOAD_HDR_OPT_TCP_SYN** is used. | |
0813a841 | 4375 | * |
bc0b5a03 QM |
4376 | * **-ENOSPC** if there is not enough space. Only *len* number of |
4377 | * bytes are copied. | |
0813a841 | 4378 | * |
bc0b5a03 QM |
4379 | * **-EFAULT** on failure to parse the header options in the |
4380 | * packet. | |
0813a841 | 4381 | * |
bc0b5a03 QM |
4382 | * **-EPERM** if the helper cannot be used under the current |
4383 | * *skops*\ **->op**. | |
0813a841 MKL |
4384 | * |
4385 | * long bpf_store_hdr_opt(struct bpf_sock_ops *skops, const void *from, u32 len, u64 flags) | |
4386 | * Description | |
4387 | * Store header option. The data will be copied | |
4388 | * from buffer *from* with length *len* to the TCP header. | |
4389 | * | |
4390 | * The buffer *from* should have the whole option that | |
4391 | * includes the kind, kind-length, and the actual | |
4392 | * option data. The *len* must be at least kind-length | |
4393 | * long. The kind-length does not have to be 4 byte | |
4394 | * aligned. The kernel will take care of the padding | |
4395 | * and setting the 4 bytes aligned value to th->doff. | |
4396 | * | |
4397 | * This helper will check for duplicated option | |
4398 | * by searching the same option in the outgoing skb. | |
4399 | * | |
4400 | * This helper can only be called during | |
bc0b5a03 | 4401 | * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. |
0813a841 MKL |
4402 | * |
4403 | * Return | |
4404 | * 0 on success, or negative error in case of failure: | |
4405 | * | |
bc0b5a03 | 4406 | * **-EINVAL** If param is invalid. |
0813a841 | 4407 | * |
bc0b5a03 QM |
4408 | * **-ENOSPC** if there is not enough space in the header. |
4409 | * Nothing has been written | |
0813a841 | 4410 | * |
bc0b5a03 | 4411 | * **-EEXIST** if the option already exists. |
0813a841 | 4412 | * |
bc0b5a03 | 4413 | * **-EFAULT** on failrue to parse the existing header options. |
0813a841 | 4414 | * |
bc0b5a03 QM |
4415 | * **-EPERM** if the helper cannot be used under the current |
4416 | * *skops*\ **->op**. | |
0813a841 MKL |
4417 | * |
4418 | * long bpf_reserve_hdr_opt(struct bpf_sock_ops *skops, u32 len, u64 flags) | |
4419 | * Description | |
4420 | * Reserve *len* bytes for the bpf header option. The | |
bc0b5a03 QM |
4421 | * space will be used by **bpf_store_hdr_opt**\ () later in |
4422 | * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. | |
0813a841 | 4423 | * |
bc0b5a03 | 4424 | * If **bpf_reserve_hdr_opt**\ () is called multiple times, |
0813a841 MKL |
4425 | * the total number of bytes will be reserved. |
4426 | * | |
4427 | * This helper can only be called during | |
bc0b5a03 | 4428 | * **BPF_SOCK_OPS_HDR_OPT_LEN_CB**. |
0813a841 MKL |
4429 | * |
4430 | * Return | |
4431 | * 0 on success, or negative error in case of failure: | |
4432 | * | |
bc0b5a03 | 4433 | * **-EINVAL** if a parameter is invalid. |
0813a841 | 4434 | * |
bc0b5a03 | 4435 | * **-ENOSPC** if there is not enough space in the header. |
0813a841 | 4436 | * |
bc0b5a03 QM |
4437 | * **-EPERM** if the helper cannot be used under the current |
4438 | * *skops*\ **->op**. | |
6e22ab9d | 4439 | * |
8ea63684 KS |
4440 | * void *bpf_inode_storage_get(struct bpf_map *map, void *inode, void *value, u64 flags) |
4441 | * Description | |
4442 | * Get a bpf_local_storage from an *inode*. | |
4443 | * | |
4444 | * Logically, it could be thought of as getting the value from | |
4445 | * a *map* with *inode* as the **key**. From this | |
4446 | * perspective, the usage is not much different from | |
4447 | * **bpf_map_lookup_elem**\ (*map*, **&**\ *inode*) except this | |
4448 | * helper enforces the key must be an inode and the map must also | |
4449 | * be a **BPF_MAP_TYPE_INODE_STORAGE**. | |
4450 | * | |
4451 | * Underneath, the value is stored locally at *inode* instead of | |
4452 | * the *map*. The *map* is used as the bpf-local-storage | |
4453 | * "type". The bpf-local-storage "type" (i.e. the *map*) is | |
4454 | * searched against all bpf_local_storage residing at *inode*. | |
4455 | * | |
4456 | * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be | |
4457 | * used such that a new bpf_local_storage will be | |
4458 | * created if one does not exist. *value* can be used | |
4459 | * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify | |
4460 | * the initial value of a bpf_local_storage. If *value* is | |
4461 | * **NULL**, the new bpf_local_storage will be zero initialized. | |
4462 | * Return | |
4463 | * A bpf_local_storage pointer is returned on success. | |
4464 | * | |
4465 | * **NULL** if not found or there was an error in adding | |
4466 | * a new bpf_local_storage. | |
4467 | * | |
4468 | * int bpf_inode_storage_delete(struct bpf_map *map, void *inode) | |
4469 | * Description | |
4470 | * Delete a bpf_local_storage from an *inode*. | |
4471 | * Return | |
4472 | * 0 on success. | |
4473 | * | |
4474 | * **-ENOENT** if the bpf_local_storage cannot be found. | |
6e22ab9d JO |
4475 | * |
4476 | * long bpf_d_path(struct path *path, char *buf, u32 sz) | |
4477 | * Description | |
bc0b5a03 QM |
4478 | * Return full path for given **struct path** object, which |
4479 | * needs to be the kernel BTF *path* object. The path is | |
4480 | * returned in the provided buffer *buf* of size *sz* and | |
6e22ab9d JO |
4481 | * is zero terminated. |
4482 | * | |
4483 | * Return | |
4484 | * On success, the strictly positive length of the string, | |
4485 | * including the trailing NUL character. On error, a negative | |
4486 | * value. | |
07be4c4a AS |
4487 | * |
4488 | * long bpf_copy_from_user(void *dst, u32 size, const void *user_ptr) | |
4489 | * Description | |
4490 | * Read *size* bytes from user space address *user_ptr* and store | |
bc0b5a03 | 4491 | * the data in *dst*. This is a wrapper of **copy_from_user**\ (). |
07be4c4a AS |
4492 | * Return |
4493 | * 0 on success, or a negative error in case of failure. | |
c4d0bfb4 AM |
4494 | * |
4495 | * long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags) | |
4496 | * Description | |
4497 | * Use BTF to store a string representation of *ptr*->ptr in *str*, | |
4498 | * using *ptr*->type_id. This value should specify the type | |
4499 | * that *ptr*->ptr points to. LLVM __builtin_btf_type_id(type, 1) | |
4500 | * can be used to look up vmlinux BTF type ids. Traversing the | |
4501 | * data structure using BTF, the type information and values are | |
4502 | * stored in the first *str_size* - 1 bytes of *str*. Safe copy of | |
4503 | * the pointer data is carried out to avoid kernel crashes during | |
4504 | * operation. Smaller types can use string space on the stack; | |
4505 | * larger programs can use map data to store the string | |
4506 | * representation. | |
4507 | * | |
4508 | * The string can be subsequently shared with userspace via | |
4509 | * bpf_perf_event_output() or ring buffer interfaces. | |
4510 | * bpf_trace_printk() is to be avoided as it places too small | |
4511 | * a limit on string size to be useful. | |
4512 | * | |
4513 | * *flags* is a combination of | |
4514 | * | |
4515 | * **BTF_F_COMPACT** | |
4516 | * no formatting around type information | |
4517 | * **BTF_F_NONAME** | |
4518 | * no struct/union member names/types | |
4519 | * **BTF_F_PTR_RAW** | |
4520 | * show raw (unobfuscated) pointer values; | |
4521 | * equivalent to printk specifier %px. | |
4522 | * **BTF_F_ZERO** | |
4523 | * show zero-valued struct/union members; they | |
4524 | * are not displayed by default | |
4525 | * | |
4526 | * Return | |
4527 | * The number of bytes that were written (or would have been | |
4528 | * written if output had to be truncated due to string size), | |
4529 | * or a negative error in cases of failure. | |
eb411377 AM |
4530 | * |
4531 | * long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 ptr_size, u64 flags) | |
4532 | * Description | |
4533 | * Use BTF to write to seq_write a string representation of | |
4534 | * *ptr*->ptr, using *ptr*->type_id as per bpf_snprintf_btf(). | |
4535 | * *flags* are identical to those used for bpf_snprintf_btf. | |
4536 | * Return | |
4537 | * 0 on success or a negative error in case of failure. | |
b426ce83 DB |
4538 | * |
4539 | * u64 bpf_skb_cgroup_classid(struct sk_buff *skb) | |
4540 | * Description | |
4541 | * See **bpf_get_cgroup_classid**\ () for the main description. | |
4542 | * This helper differs from **bpf_get_cgroup_classid**\ () in that | |
4543 | * the cgroup v1 net_cls class is retrieved only from the *skb*'s | |
4544 | * associated socket instead of the current process. | |
4545 | * Return | |
4546 | * The id is returned or 0 in case the id could not be retrieved. | |
b4ab3141 | 4547 | * |
ba452c9e | 4548 | * long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags) |
b4ab3141 DB |
4549 | * Description |
4550 | * Redirect the packet to another net device of index *ifindex* | |
4551 | * and fill in L2 addresses from neighboring subsystem. This helper | |
4552 | * is somewhat similar to **bpf_redirect**\ (), except that it | |
dd2ce6a5 | 4553 | * populates L2 addresses as well, meaning, internally, the helper |
ba452c9e THJ |
4554 | * relies on the neighbor lookup for the L2 address of the nexthop. |
4555 | * | |
4556 | * The helper will perform a FIB lookup based on the skb's | |
4557 | * networking header to get the address of the next hop, unless | |
4558 | * this is supplied by the caller in the *params* argument. The | |
4559 | * *plen* argument indicates the len of *params* and should be set | |
4560 | * to 0 if *params* is NULL. | |
dd2ce6a5 | 4561 | * |
b4ab3141 | 4562 | * The *flags* argument is reserved and must be 0. The helper is |
dd2ce6a5 DB |
4563 | * currently only supported for tc BPF program types, and enabled |
4564 | * for IPv4 and IPv6 protocols. | |
b4ab3141 DB |
4565 | * Return |
4566 | * The helper returns **TC_ACT_REDIRECT** on success or | |
4567 | * **TC_ACT_SHOT** on error. | |
eaa6bcb7 HL |
4568 | * |
4569 | * void *bpf_per_cpu_ptr(const void *percpu_ptr, u32 cpu) | |
4570 | * Description | |
4571 | * Take a pointer to a percpu ksym, *percpu_ptr*, and return a | |
4572 | * pointer to the percpu kernel variable on *cpu*. A ksym is an | |
4573 | * extern variable decorated with '__ksym'. For ksym, there is a | |
4574 | * global var (either static or global) defined of the same name | |
4575 | * in the kernel. The ksym is percpu if the global var is percpu. | |
4576 | * The returned pointer points to the global percpu var on *cpu*. | |
4577 | * | |
4578 | * bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the | |
4579 | * kernel, except that bpf_per_cpu_ptr() may return NULL. This | |
4580 | * happens if *cpu* is larger than nr_cpu_ids. The caller of | |
4581 | * bpf_per_cpu_ptr() must check the returned value. | |
4582 | * Return | |
4583 | * A pointer pointing to the kernel percpu variable on *cpu*, or | |
4584 | * NULL, if *cpu* is invalid. | |
63d9b80d HL |
4585 | * |
4586 | * void *bpf_this_cpu_ptr(const void *percpu_ptr) | |
4587 | * Description | |
4588 | * Take a pointer to a percpu ksym, *percpu_ptr*, and return a | |
4589 | * pointer to the percpu kernel variable on this cpu. See the | |
4590 | * description of 'ksym' in **bpf_per_cpu_ptr**\ (). | |
4591 | * | |
4592 | * bpf_this_cpu_ptr() has the same semantic as this_cpu_ptr() in | |
4593 | * the kernel. Different from **bpf_per_cpu_ptr**\ (), it would | |
4594 | * never return NULL. | |
4595 | * Return | |
4596 | * A pointer pointing to the kernel percpu variable on this cpu. | |
9aa1206e DB |
4597 | * |
4598 | * long bpf_redirect_peer(u32 ifindex, u64 flags) | |
4599 | * Description | |
4600 | * Redirect the packet to another net device of index *ifindex*. | |
4601 | * This helper is somewhat similar to **bpf_redirect**\ (), except | |
4602 | * that the redirection happens to the *ifindex*' peer device and | |
4603 | * the netns switch takes place from ingress to ingress without | |
4604 | * going through the CPU's backlog queue. | |
4605 | * | |
4606 | * The *flags* argument is reserved and must be 0. The helper is | |
4607 | * currently only supported for tc BPF program types at the ingress | |
4608 | * hook and for veth device types. The peer device must reside in a | |
4609 | * different network namespace. | |
4610 | * Return | |
4611 | * The helper returns **TC_ACT_REDIRECT** on success or | |
4612 | * **TC_ACT_SHOT** on error. | |
4cf1bc1f KS |
4613 | * |
4614 | * void *bpf_task_storage_get(struct bpf_map *map, struct task_struct *task, void *value, u64 flags) | |
4615 | * Description | |
4616 | * Get a bpf_local_storage from the *task*. | |
4617 | * | |
4618 | * Logically, it could be thought of as getting the value from | |
4619 | * a *map* with *task* as the **key**. From this | |
4620 | * perspective, the usage is not much different from | |
4621 | * **bpf_map_lookup_elem**\ (*map*, **&**\ *task*) except this | |
4622 | * helper enforces the key must be an task_struct and the map must also | |
4623 | * be a **BPF_MAP_TYPE_TASK_STORAGE**. | |
4624 | * | |
4625 | * Underneath, the value is stored locally at *task* instead of | |
4626 | * the *map*. The *map* is used as the bpf-local-storage | |
4627 | * "type". The bpf-local-storage "type" (i.e. the *map*) is | |
4628 | * searched against all bpf_local_storage residing at *task*. | |
4629 | * | |
4630 | * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be | |
4631 | * used such that a new bpf_local_storage will be | |
4632 | * created if one does not exist. *value* can be used | |
4633 | * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify | |
4634 | * the initial value of a bpf_local_storage. If *value* is | |
4635 | * **NULL**, the new bpf_local_storage will be zero initialized. | |
4636 | * Return | |
4637 | * A bpf_local_storage pointer is returned on success. | |
4638 | * | |
4639 | * **NULL** if not found or there was an error in adding | |
4640 | * a new bpf_local_storage. | |
4641 | * | |
4642 | * long bpf_task_storage_delete(struct bpf_map *map, struct task_struct *task) | |
4643 | * Description | |
4644 | * Delete a bpf_local_storage from a *task*. | |
4645 | * Return | |
4646 | * 0 on success. | |
4647 | * | |
4648 | * **-ENOENT** if the bpf_local_storage cannot be found. | |
3ca1032a KS |
4649 | * |
4650 | * struct task_struct *bpf_get_current_task_btf(void) | |
4651 | * Description | |
4652 | * Return a BTF pointer to the "current" task. | |
4653 | * This pointer can also be used in helpers that accept an | |
4654 | * *ARG_PTR_TO_BTF_ID* of type *task_struct*. | |
4655 | * Return | |
4656 | * Pointer to the current task. | |
3f6719c7 KS |
4657 | * |
4658 | * long bpf_bprm_opts_set(struct linux_binprm *bprm, u64 flags) | |
4659 | * Description | |
4660 | * Set or clear certain options on *bprm*: | |
4661 | * | |
4662 | * **BPF_F_BPRM_SECUREEXEC** Set the secureexec bit | |
4663 | * which sets the **AT_SECURE** auxv for glibc. The bit | |
4664 | * is cleared if the flag is not specified. | |
4665 | * Return | |
4666 | * **-EINVAL** if invalid *flags* are passed, zero otherwise. | |
d0551261 DB |
4667 | * |
4668 | * u64 bpf_ktime_get_coarse_ns(void) | |
4669 | * Description | |
4670 | * Return a coarse-grained version of the time elapsed since | |
4671 | * system boot, in nanoseconds. Does not include time the system | |
4672 | * was suspended. | |
4673 | * | |
4674 | * See: **clock_gettime**\ (**CLOCK_MONOTONIC_COARSE**) | |
4675 | * Return | |
4676 | * Current *ktime*. | |
27672f0d KS |
4677 | * |
4678 | * long bpf_ima_inode_hash(struct inode *inode, void *dst, u32 size) | |
4679 | * Description | |
4680 | * Returns the stored IMA hash of the *inode* (if it's avaialable). | |
4681 | * If the hash is larger than *size*, then only *size* | |
4682 | * bytes will be copied to *dst* | |
4683 | * Return | |
4684 | * The **hash_algo** is returned on success, | |
4685 | * **-EOPNOTSUP** if IMA is disabled or **-EINVAL** if | |
4686 | * invalid arguments are passed. | |
4f19cab7 FR |
4687 | * |
4688 | * struct socket *bpf_sock_from_file(struct file *file) | |
4689 | * Description | |
4690 | * If the given file represents a socket, returns the associated | |
4691 | * socket. | |
4692 | * Return | |
4693 | * A pointer to a struct socket on success or NULL if the file is | |
4694 | * not a socket. | |
34b2021c JDB |
4695 | * |
4696 | * long bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags) | |
4697 | * Description | |
cbaa683b | 4698 | * Check packet size against exceeding MTU of net device (based |
34b2021c JDB |
4699 | * on *ifindex*). This helper will likely be used in combination |
4700 | * with helpers that adjust/change the packet size. | |
4701 | * | |
4702 | * The argument *len_diff* can be used for querying with a planned | |
4703 | * size change. This allows to check MTU prior to changing packet | |
4704 | * ctx. Providing an *len_diff* adjustment that is larger than the | |
4705 | * actual packet size (resulting in negative packet size) will in | |
4706 | * principle not exceed the MTU, why it is not considered a | |
4707 | * failure. Other BPF-helpers are needed for performing the | |
4708 | * planned size change, why the responsability for catch a negative | |
4709 | * packet size belong in those helpers. | |
4710 | * | |
4711 | * Specifying *ifindex* zero means the MTU check is performed | |
4712 | * against the current net device. This is practical if this isn't | |
4713 | * used prior to redirect. | |
4714 | * | |
cbaa683b DB |
4715 | * On input *mtu_len* must be a valid pointer, else verifier will |
4716 | * reject BPF program. If the value *mtu_len* is initialized to | |
4717 | * zero then the ctx packet size is use. When value *mtu_len* is | |
4718 | * provided as input this specify the L3 length that the MTU check | |
4719 | * is done against. Remember XDP and TC length operate at L2, but | |
4720 | * this value is L3 as this correlate to MTU and IP-header tot_len | |
4721 | * values which are L3 (similar behavior as bpf_fib_lookup). | |
4722 | * | |
34b2021c JDB |
4723 | * The Linux kernel route table can configure MTUs on a more |
4724 | * specific per route level, which is not provided by this helper. | |
4725 | * For route level MTU checks use the **bpf_fib_lookup**\ () | |
4726 | * helper. | |
4727 | * | |
4728 | * *ctx* is either **struct xdp_md** for XDP programs or | |
4729 | * **struct sk_buff** for tc cls_act programs. | |
4730 | * | |
4731 | * The *flags* argument can be a combination of one or more of the | |
4732 | * following values: | |
4733 | * | |
4734 | * **BPF_MTU_CHK_SEGS** | |
4735 | * This flag will only works for *ctx* **struct sk_buff**. | |
4736 | * If packet context contains extra packet segment buffers | |
4737 | * (often knows as GSO skb), then MTU check is harder to | |
4738 | * check at this point, because in transmit path it is | |
4739 | * possible for the skb packet to get re-segmented | |
4740 | * (depending on net device features). This could still be | |
4741 | * a MTU violation, so this flag enables performing MTU | |
4742 | * check against segments, with a different violation | |
4743 | * return code to tell it apart. Check cannot use len_diff. | |
4744 | * | |
4745 | * On return *mtu_len* pointer contains the MTU value of the net | |
4746 | * device. Remember the net device configured MTU is the L3 size, | |
cbaa683b | 4747 | * which is returned here and XDP and TC length operate at L2. |
34b2021c | 4748 | * Helper take this into account for you, but remember when using |
cbaa683b | 4749 | * MTU value in your BPF-code. |
34b2021c JDB |
4750 | * |
4751 | * Return | |
4752 | * * 0 on success, and populate MTU value in *mtu_len* pointer. | |
4753 | * | |
4754 | * * < 0 if any input argument is invalid (*mtu_len* not updated) | |
4755 | * | |
4756 | * MTU violations return positive values, but also populate MTU | |
4757 | * value in *mtu_len* pointer, as this can be needed for | |
4758 | * implementing PMTU handing: | |
4759 | * | |
4760 | * * **BPF_MTU_CHK_RET_FRAG_NEEDED** | |
4761 | * * **BPF_MTU_CHK_RET_SEGS_TOOBIG** | |
4762 | * | |
69c087ba YS |
4763 | * long bpf_for_each_map_elem(struct bpf_map *map, void *callback_fn, void *callback_ctx, u64 flags) |
4764 | * Description | |
4765 | * For each element in **map**, call **callback_fn** function with | |
4766 | * **map**, **callback_ctx** and other map-specific parameters. | |
4767 | * The **callback_fn** should be a static function and | |
4768 | * the **callback_ctx** should be a pointer to the stack. | |
4769 | * The **flags** is used to control certain aspects of the helper. | |
4770 | * Currently, the **flags** must be 0. | |
4771 | * | |
4772 | * The following are a list of supported map types and their | |
4773 | * respective expected callback signatures: | |
4774 | * | |
4775 | * BPF_MAP_TYPE_HASH, BPF_MAP_TYPE_PERCPU_HASH, | |
4776 | * BPF_MAP_TYPE_LRU_HASH, BPF_MAP_TYPE_LRU_PERCPU_HASH, | |
4777 | * BPF_MAP_TYPE_ARRAY, BPF_MAP_TYPE_PERCPU_ARRAY | |
4778 | * | |
4779 | * long (\*callback_fn)(struct bpf_map \*map, const void \*key, void \*value, void \*ctx); | |
4780 | * | |
4781 | * For per_cpu maps, the map_value is the value on the cpu where the | |
4782 | * bpf_prog is running. | |
4783 | * | |
4784 | * If **callback_fn** return 0, the helper will continue to the next | |
4785 | * element. If return value is 1, the helper will skip the rest of | |
4786 | * elements and return. Other return values are not used now. | |
4787 | * | |
4788 | * Return | |
4789 | * The number of traversed map elements for success, **-EINVAL** for | |
4790 | * invalid **flags**. | |
7b15523a FR |
4791 | * |
4792 | * long bpf_snprintf(char *str, u32 str_size, const char *fmt, u64 *data, u32 data_len) | |
4793 | * Description | |
4794 | * Outputs a string into the **str** buffer of size **str_size** | |
4795 | * based on a format string stored in a read-only map pointed by | |
4796 | * **fmt**. | |
4797 | * | |
4798 | * Each format specifier in **fmt** corresponds to one u64 element | |
4799 | * in the **data** array. For strings and pointers where pointees | |
4800 | * are accessed, only the pointer values are stored in the *data* | |
a42effb0 DM |
4801 | * array. The *data_len* is the size of *data* in bytes - must be |
4802 | * a multiple of 8. | |
7b15523a FR |
4803 | * |
4804 | * Formats **%s** and **%p{i,I}{4,6}** require to read kernel | |
4805 | * memory. Reading kernel memory may fail due to either invalid | |
4806 | * address or valid address but requiring a major memory fault. If | |
4807 | * reading kernel memory fails, the string for **%s** will be an | |
4808 | * empty string, and the ip address for **%p{i,I}{4,6}** will be 0. | |
4809 | * Not returning error to bpf program is consistent with what | |
4810 | * **bpf_trace_printk**\ () does for now. | |
4811 | * | |
4812 | * Return | |
4813 | * The strictly positive length of the formatted string, including | |
4814 | * the trailing zero character. If the return value is greater than | |
4815 | * **str_size**, **str** contains a truncated string, guaranteed to | |
4816 | * be zero-terminated except when **str_size** is 0. | |
4817 | * | |
4818 | * Or **-EBUSY** if the per-CPU memory copy buffer is busy. | |
79a7f8bd AS |
4819 | * |
4820 | * long bpf_sys_bpf(u32 cmd, void *attr, u32 attr_size) | |
4821 | * Description | |
4822 | * Execute bpf syscall with given arguments. | |
4823 | * Return | |
4824 | * A syscall result. | |
3d78417b AS |
4825 | * |
4826 | * long bpf_btf_find_by_name_kind(char *name, int name_sz, u32 kind, int flags) | |
4827 | * Description | |
4828 | * Find BTF type with given name and kind in vmlinux BTF or in module's BTFs. | |
4829 | * Return | |
4830 | * Returns btf_id and btf_obj_fd in lower and upper 32 bits. | |
3abea089 AS |
4831 | * |
4832 | * long bpf_sys_close(u32 fd) | |
4833 | * Description | |
4834 | * Execute close syscall for given FD. | |
4835 | * Return | |
4836 | * A syscall result. | |
b00628b1 AS |
4837 | * |
4838 | * long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, u64 flags) | |
4839 | * Description | |
4840 | * Initialize the timer. | |
4841 | * First 4 bits of *flags* specify clockid. | |
4842 | * Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed. | |
4843 | * All other bits of *flags* are reserved. | |
4844 | * The verifier will reject the program if *timer* is not from | |
4845 | * the same *map*. | |
4846 | * Return | |
4847 | * 0 on success. | |
4848 | * **-EBUSY** if *timer* is already initialized. | |
4849 | * **-EINVAL** if invalid *flags* are passed. | |
4850 | * **-EPERM** if *timer* is in a map that doesn't have any user references. | |
4851 | * The user space should either hold a file descriptor to a map with timers | |
4852 | * or pin such map in bpffs. When map is unpinned or file descriptor is | |
4853 | * closed all timers in the map will be cancelled and freed. | |
4854 | * | |
4855 | * long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn) | |
4856 | * Description | |
4857 | * Configure the timer to call *callback_fn* static function. | |
4858 | * Return | |
4859 | * 0 on success. | |
4860 | * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. | |
4861 | * **-EPERM** if *timer* is in a map that doesn't have any user references. | |
4862 | * The user space should either hold a file descriptor to a map with timers | |
4863 | * or pin such map in bpffs. When map is unpinned or file descriptor is | |
4864 | * closed all timers in the map will be cancelled and freed. | |
4865 | * | |
4866 | * long bpf_timer_start(struct bpf_timer *timer, u64 nsecs, u64 flags) | |
4867 | * Description | |
4868 | * Set timer expiration N nanoseconds from the current time. The | |
4869 | * configured callback will be invoked in soft irq context on some cpu | |
4870 | * and will not repeat unless another bpf_timer_start() is made. | |
4871 | * In such case the next invocation can migrate to a different cpu. | |
4872 | * Since struct bpf_timer is a field inside map element the map | |
4873 | * owns the timer. The bpf_timer_set_callback() will increment refcnt | |
4874 | * of BPF program to make sure that callback_fn code stays valid. | |
4875 | * When user space reference to a map reaches zero all timers | |
4876 | * in a map are cancelled and corresponding program's refcnts are | |
4877 | * decremented. This is done to make sure that Ctrl-C of a user | |
4878 | * process doesn't leave any timers running. If map is pinned in | |
4879 | * bpffs the callback_fn can re-arm itself indefinitely. | |
4880 | * bpf_map_update/delete_elem() helpers and user space sys_bpf commands | |
4881 | * cancel and free the timer in the given map element. | |
4882 | * The map can contain timers that invoke callback_fn-s from different | |
4883 | * programs. The same callback_fn can serve different timers from | |
4884 | * different maps if key/value layout matches across maps. | |
4885 | * Every bpf_timer_set_callback() can have different callback_fn. | |
4886 | * | |
4887 | * Return | |
4888 | * 0 on success. | |
4889 | * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier | |
4890 | * or invalid *flags* are passed. | |
4891 | * | |
4892 | * long bpf_timer_cancel(struct bpf_timer *timer) | |
4893 | * Description | |
4894 | * Cancel the timer and wait for callback_fn to finish if it was running. | |
4895 | * Return | |
4896 | * 0 if the timer was not active. | |
4897 | * 1 if the timer was active. | |
4898 | * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. | |
4899 | * **-EDEADLK** if callback_fn tried to call bpf_timer_cancel() on its | |
4900 | * own timer which would have led to a deadlock otherwise. | |
9b99edca JO |
4901 | * |
4902 | * u64 bpf_get_func_ip(void *ctx) | |
4903 | * Description | |
9ffd9f3f | 4904 | * Get address of the traced function (for tracing and kprobe programs). |
9b99edca JO |
4905 | * Return |
4906 | * Address of the traced function. | |
7adfc6c9 AN |
4907 | * |
4908 | * u64 bpf_get_attach_cookie(void *ctx) | |
4909 | * Description | |
4910 | * Get bpf_cookie value provided (optionally) during the program | |
4911 | * attachment. It might be different for each individual | |
4912 | * attachment, even if BPF program itself is the same. | |
4913 | * Expects BPF program context *ctx* as a first argument. | |
4914 | * | |
4915 | * Supported for the following program types: | |
4916 | * - kprobe/uprobe; | |
4917 | * - tracepoint; | |
4918 | * - perf_event. | |
4919 | * Return | |
4920 | * Value specified by user at BPF link creation/attachment time | |
4921 | * or 0, if it was not specified. | |
dd6e10fb DX |
4922 | * |
4923 | * long bpf_task_pt_regs(struct task_struct *task) | |
4924 | * Description | |
4925 | * Get the struct pt_regs associated with **task**. | |
4926 | * Return | |
4927 | * A pointer to struct pt_regs. | |
856c02db SL |
4928 | * |
4929 | * long bpf_get_branch_snapshot(void *entries, u32 size, u64 flags) | |
4930 | * Description | |
4931 | * Get branch trace from hardware engines like Intel LBR. The | |
4932 | * hardware engine is stopped shortly after the helper is | |
4933 | * called. Therefore, the user need to filter branch entries | |
4934 | * based on the actual use case. To capture branch trace | |
4935 | * before the trigger point of the BPF program, the helper | |
4936 | * should be called at the beginning of the BPF program. | |
4937 | * | |
4938 | * The data is stored as struct perf_branch_entry into output | |
4939 | * buffer *entries*. *size* is the size of *entries* in bytes. | |
4940 | * *flags* is reserved for now and must be zero. | |
4941 | * | |
4942 | * Return | |
4943 | * On success, number of bytes written to *buf*. On error, a | |
4944 | * negative value. | |
4945 | * | |
4946 | * **-EINVAL** if *flags* is not zero. | |
4947 | * | |
4948 | * **-ENOENT** if architecture does not support branch records. | |
10aceb62 DM |
4949 | * |
4950 | * long bpf_trace_vprintk(const char *fmt, u32 fmt_size, const void *data, u32 data_len) | |
4951 | * Description | |
4952 | * Behaves like **bpf_trace_printk**\ () helper, but takes an array of u64 | |
4953 | * to format and can handle more format args as a result. | |
4954 | * | |
4955 | * Arguments are to be used as in **bpf_seq_printf**\ () helper. | |
4956 | * Return | |
4957 | * The number of bytes written to the buffer, or a negative error | |
4958 | * in case of failure. | |
9eeb3aa3 HC |
4959 | * |
4960 | * struct unix_sock *bpf_skc_to_unix_sock(void *sk) | |
4961 | * Description | |
4962 | * Dynamically cast a *sk* pointer to a *unix_sock* pointer. | |
4963 | * Return | |
4964 | * *sk* if casting is valid, or **NULL** otherwise. | |
d6aef08a KKD |
4965 | * |
4966 | * long bpf_kallsyms_lookup_name(const char *name, int name_sz, int flags, u64 *res) | |
4967 | * Description | |
4968 | * Get the address of a kernel symbol, returned in *res*. *res* is | |
4969 | * set to 0 if the symbol is not found. | |
4970 | * Return | |
4971 | * On success, zero. On error, a negative value. | |
4972 | * | |
4973 | * **-EINVAL** if *flags* is not zero. | |
4974 | * | |
4975 | * **-EINVAL** if string *name* is not the same size as *name_sz*. | |
4976 | * | |
4977 | * **-ENOENT** if symbol is not found. | |
4978 | * | |
4979 | * **-EPERM** if caller does not have permission to obtain kernel address. | |
7c7e3d31 SL |
4980 | * |
4981 | * long bpf_find_vma(struct task_struct *task, u64 addr, void *callback_fn, void *callback_ctx, u64 flags) | |
4982 | * Description | |
4983 | * Find vma of *task* that contains *addr*, call *callback_fn* | |
4984 | * function with *task*, *vma*, and *callback_ctx*. | |
4985 | * The *callback_fn* should be a static function and | |
4986 | * the *callback_ctx* should be a pointer to the stack. | |
4987 | * The *flags* is used to control certain aspects of the helper. | |
4988 | * Currently, the *flags* must be 0. | |
4989 | * | |
4990 | * The expected callback signature is | |
4991 | * | |
4992 | * long (\*callback_fn)(struct task_struct \*task, struct vm_area_struct \*vma, void \*callback_ctx); | |
4993 | * | |
4994 | * Return | |
4995 | * 0 on success. | |
4996 | * **-ENOENT** if *task->mm* is NULL, or no vma contains *addr*. | |
4997 | * **-EBUSY** if failed to try lock mmap_lock. | |
4998 | * **-EINVAL** for invalid **flags**. | |
e6f2dd0f JK |
4999 | * |
5000 | * long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags) | |
5001 | * Description | |
5002 | * For **nr_loops**, call **callback_fn** function | |
5003 | * with **callback_ctx** as the context parameter. | |
5004 | * The **callback_fn** should be a static function and | |
5005 | * the **callback_ctx** should be a pointer to the stack. | |
5006 | * The **flags** is used to control certain aspects of the helper. | |
5007 | * Currently, the **flags** must be 0. Currently, nr_loops is | |
5008 | * limited to 1 << 23 (~8 million) loops. | |
5009 | * | |
5010 | * long (\*callback_fn)(u32 index, void \*ctx); | |
5011 | * | |
5012 | * where **index** is the current index in the loop. The index | |
5013 | * is zero-indexed. | |
5014 | * | |
5015 | * If **callback_fn** returns 0, the helper will continue to the next | |
5016 | * loop. If return value is 1, the helper will skip the rest of | |
5017 | * the loops and return. Other return values are not used now, | |
5018 | * and will be rejected by the verifier. | |
5019 | * | |
5020 | * Return | |
5021 | * The number of loops performed, **-EINVAL** for invalid **flags**, | |
5022 | * **-E2BIG** if **nr_loops** exceeds the maximum number of loops. | |
c5fb1993 HT |
5023 | * |
5024 | * long bpf_strncmp(const char *s1, u32 s1_sz, const char *s2) | |
5025 | * Description | |
5026 | * Do strncmp() between **s1** and **s2**. **s1** doesn't need | |
5027 | * to be null-terminated and **s1_sz** is the maximum storage | |
5028 | * size of **s1**. **s2** must be a read-only string. | |
5029 | * Return | |
5030 | * An integer less than, equal to, or greater than zero | |
5031 | * if the first **s1_sz** bytes of **s1** is found to be | |
5032 | * less than, to match, or be greater than **s2**. | |
f92c1e18 JO |
5033 | * |
5034 | * long bpf_get_func_arg(void *ctx, u32 n, u64 *value) | |
5035 | * Description | |
5036 | * Get **n**-th argument (zero based) of the traced function (for tracing programs) | |
5037 | * returned in **value**. | |
5038 | * | |
5039 | * Return | |
5040 | * 0 on success. | |
5041 | * **-EINVAL** if n >= arguments count of traced function. | |
5042 | * | |
5043 | * long bpf_get_func_ret(void *ctx, u64 *value) | |
5044 | * Description | |
5045 | * Get return value of the traced function (for tracing programs) | |
5046 | * in **value**. | |
5047 | * | |
5048 | * Return | |
5049 | * 0 on success. | |
5050 | * **-EOPNOTSUPP** for tracing programs other than BPF_TRACE_FEXIT or BPF_MODIFY_RETURN. | |
5051 | * | |
5052 | * long bpf_get_func_arg_cnt(void *ctx) | |
5053 | * Description | |
5054 | * Get number of arguments of the traced function (for tracing programs). | |
5055 | * | |
5056 | * Return | |
5057 | * The number of arguments of the traced function. | |
b44123b4 YZ |
5058 | * |
5059 | * int bpf_get_retval(void) | |
5060 | * Description | |
5061 | * Get the syscall's return value that will be returned to userspace. | |
5062 | * | |
5063 | * This helper is currently supported by cgroup programs only. | |
5064 | * Return | |
5065 | * The syscall's return value. | |
5066 | * | |
5067 | * int bpf_set_retval(int retval) | |
5068 | * Description | |
5069 | * Set the syscall's return value that will be returned to userspace. | |
5070 | * | |
5071 | * This helper is currently supported by cgroup programs only. | |
5072 | * Return | |
5073 | * 0 on success, or a negative error in case of failure. | |
0165cc81 LB |
5074 | * |
5075 | * u64 bpf_xdp_get_buff_len(struct xdp_buff *xdp_md) | |
5076 | * Description | |
5077 | * Get the total size of a given xdp buff (linear and paged area) | |
5078 | * Return | |
5079 | * The total size of a given xdp buffer. | |
3f364222 LB |
5080 | * |
5081 | * long bpf_xdp_load_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) | |
5082 | * Description | |
5083 | * This helper is provided as an easy way to load data from a | |
5084 | * xdp buffer. It can be used to load *len* bytes from *offset* from | |
5085 | * the frame associated to *xdp_md*, into the buffer pointed by | |
5086 | * *buf*. | |
5087 | * Return | |
5088 | * 0 on success, or a negative error in case of failure. | |
5089 | * | |
5090 | * long bpf_xdp_store_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) | |
5091 | * Description | |
5092 | * Store *len* bytes from buffer *buf* into the frame | |
5093 | * associated to *xdp_md*, at *offset*. | |
5094 | * Return | |
5095 | * 0 on success, or a negative error in case of failure. | |
376040e4 KY |
5096 | * |
5097 | * long bpf_copy_from_user_task(void *dst, u32 size, const void *user_ptr, struct task_struct *tsk, u64 flags) | |
5098 | * Description | |
5099 | * Read *size* bytes from user space address *user_ptr* in *tsk*'s | |
5100 | * address space, and stores the data in *dst*. *flags* is not | |
5101 | * used yet and is provided for future extensibility. This helper | |
5102 | * can only be used by sleepable programs. | |
5103 | * Return | |
5104 | * 0 on success, or a negative error in case of failure. On error | |
5105 | * *dst* buffer is zeroed out. | |
8d21ec0e | 5106 | * |
9bb984f2 | 5107 | * long bpf_skb_set_tstamp(struct sk_buff *skb, u64 tstamp, u32 tstamp_type) |
8d21ec0e | 5108 | * Description |
9bb984f2 MKL |
5109 | * Change the __sk_buff->tstamp_type to *tstamp_type* |
5110 | * and set *tstamp* to the __sk_buff->tstamp together. | |
8d21ec0e | 5111 | * |
9bb984f2 MKL |
5112 | * If there is no need to change the __sk_buff->tstamp_type, |
5113 | * the tstamp value can be directly written to __sk_buff->tstamp | |
8d21ec0e MKL |
5114 | * instead. |
5115 | * | |
9bb984f2 MKL |
5116 | * BPF_SKB_TSTAMP_DELIVERY_MONO is the only tstamp that |
5117 | * will be kept during bpf_redirect_*(). A non zero | |
5118 | * *tstamp* must be used with the BPF_SKB_TSTAMP_DELIVERY_MONO | |
5119 | * *tstamp_type*. | |
5120 | * | |
5121 | * A BPF_SKB_TSTAMP_UNSPEC *tstamp_type* can only be used | |
5122 | * with a zero *tstamp*. | |
8d21ec0e MKL |
5123 | * |
5124 | * Only IPv4 and IPv6 skb->protocol are supported. | |
5125 | * | |
5126 | * This function is most useful when it needs to set a | |
5127 | * mono delivery time to __sk_buff->tstamp and then | |
5128 | * bpf_redirect_*() to the egress of an iface. For example, | |
5129 | * changing the (rcv) timestamp in __sk_buff->tstamp at | |
5130 | * ingress to a mono delivery time and then bpf_redirect_*() | |
5131 | * to sch_fq@phy-dev. | |
5132 | * Return | |
5133 | * 0 on success. | |
5134 | * **-EINVAL** for invalid input | |
9bb984f2 | 5135 | * **-EOPNOTSUPP** for unsupported protocol |
174b1694 RS |
5136 | * |
5137 | * long bpf_ima_file_hash(struct file *file, void *dst, u32 size) | |
5138 | * Description | |
5139 | * Returns a calculated IMA hash of the *file*. | |
5140 | * If the hash is larger than *size*, then only *size* | |
5141 | * bytes will be copied to *dst* | |
5142 | * Return | |
5143 | * The **hash_algo** is returned on success, | |
5144 | * **-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if | |
5145 | * invalid arguments are passed. | |
c0a5a21c KKD |
5146 | * |
5147 | * void *bpf_kptr_xchg(void *map_value, void *ptr) | |
5148 | * Description | |
5149 | * Exchange kptr at pointer *map_value* with *ptr*, and return the | |
5150 | * old value. *ptr* can be NULL, otherwise it must be a referenced | |
5151 | * pointer which will be released when this helper is called. | |
5152 | * Return | |
5153 | * The old value of kptr (which can be NULL). The returned pointer | |
5154 | * if not NULL, is a reference which must be released using its | |
5155 | * corresponding release function, or moved into a BPF map before | |
5156 | * program exit. | |
0cb34dc2 JS |
5157 | */ |
5158 | #define __BPF_FUNC_MAPPER(FN) \ | |
5159 | FN(unspec), \ | |
5160 | FN(map_lookup_elem), \ | |
5161 | FN(map_update_elem), \ | |
5162 | FN(map_delete_elem), \ | |
5163 | FN(probe_read), \ | |
5164 | FN(ktime_get_ns), \ | |
5165 | FN(trace_printk), \ | |
5166 | FN(get_prandom_u32), \ | |
5167 | FN(get_smp_processor_id), \ | |
5168 | FN(skb_store_bytes), \ | |
5169 | FN(l3_csum_replace), \ | |
5170 | FN(l4_csum_replace), \ | |
5171 | FN(tail_call), \ | |
5172 | FN(clone_redirect), \ | |
5173 | FN(get_current_pid_tgid), \ | |
5174 | FN(get_current_uid_gid), \ | |
5175 | FN(get_current_comm), \ | |
5176 | FN(get_cgroup_classid), \ | |
5177 | FN(skb_vlan_push), \ | |
5178 | FN(skb_vlan_pop), \ | |
5179 | FN(skb_get_tunnel_key), \ | |
5180 | FN(skb_set_tunnel_key), \ | |
5181 | FN(perf_event_read), \ | |
5182 | FN(redirect), \ | |
5183 | FN(get_route_realm), \ | |
5184 | FN(perf_event_output), \ | |
5185 | FN(skb_load_bytes), \ | |
5186 | FN(get_stackid), \ | |
5187 | FN(csum_diff), \ | |
5188 | FN(skb_get_tunnel_opt), \ | |
5189 | FN(skb_set_tunnel_opt), \ | |
5190 | FN(skb_change_proto), \ | |
5191 | FN(skb_change_type), \ | |
5192 | FN(skb_under_cgroup), \ | |
5193 | FN(get_hash_recalc), \ | |
5194 | FN(get_current_task), \ | |
5195 | FN(probe_write_user), \ | |
5196 | FN(current_task_under_cgroup), \ | |
5197 | FN(skb_change_tail), \ | |
5198 | FN(skb_pull_data), \ | |
5199 | FN(csum_update), \ | |
5200 | FN(set_hash_invalid), \ | |
5201 | FN(get_numa_node_id), \ | |
5202 | FN(skb_change_head), \ | |
9a738266 | 5203 | FN(xdp_adjust_head), \ |
91b8270f | 5204 | FN(probe_read_str), \ |
6acc5c29 | 5205 | FN(get_socket_cookie), \ |
ded092cd | 5206 | FN(get_socket_uid), \ |
04df41e3 | 5207 | FN(set_hash), \ |
2be7e212 | 5208 | FN(setsockopt), \ |
996139e8 | 5209 | FN(skb_adjust_room), \ |
69e8cc13 JF |
5210 | FN(redirect_map), \ |
5211 | FN(sk_redirect_map), \ | |
ac29991b | 5212 | FN(sock_map_update), \ |
020a32d9 | 5213 | FN(xdp_adjust_meta), \ |
81b9cf80 | 5214 | FN(perf_event_read_value), \ |
e27afb84 | 5215 | FN(perf_prog_read_value), \ |
965de87e | 5216 | FN(getsockopt), \ |
d6d4f60c | 5217 | FN(override_return), \ |
4c4c3c27 JF |
5218 | FN(sock_ops_cb_flags_set), \ |
5219 | FN(msg_redirect_map), \ | |
468b3fde | 5220 | FN(msg_apply_bytes), \ |
0dcbbf67 | 5221 | FN(msg_cork_bytes), \ |
622adafb | 5222 | FN(msg_pull_data), \ |
0367d0a2 | 5223 | FN(bind), \ |
29a36f9e | 5224 | FN(xdp_adjust_tail), \ |
de2ff05f | 5225 | FN(skb_get_xfrm_state), \ |
32b3652c | 5226 | FN(get_stack), \ |
cb9c28ef | 5227 | FN(skb_load_bytes_relative), \ |
b8b394fa JF |
5228 | FN(fib_lookup), \ |
5229 | FN(sock_hash_update), \ | |
5230 | FN(msg_redirect_hash), \ | |
c99a84ea MX |
5231 | FN(sk_redirect_hash), \ |
5232 | FN(lwt_push_encap), \ | |
5233 | FN(lwt_seg6_store_bytes), \ | |
5234 | FN(lwt_seg6_adjust_srh), \ | |
6bdd533c SY |
5235 | FN(lwt_seg6_action), \ |
5236 | FN(rc_repeat), \ | |
6b6a1925 | 5237 | FN(rc_keydown), \ |
c7ddbbaf | 5238 | FN(skb_cgroup_id), \ |
c419cf52 | 5239 | FN(get_current_cgroup_id), \ |
3bd43a8c | 5240 | FN(get_local_storage), \ |
539764d0 | 5241 | FN(sk_select_reuseport), \ |
6acc9b43 JS |
5242 | FN(skb_ancestor_cgroup_id), \ |
5243 | FN(sk_lookup_tcp), \ | |
5244 | FN(sk_lookup_udp), \ | |
da4e1b15 MV |
5245 | FN(sk_release), \ |
5246 | FN(map_push_elem), \ | |
5247 | FN(map_pop_elem), \ | |
f908d26b | 5248 | FN(map_peek_elem), \ |
d913a227 | 5249 | FN(msg_push_data), \ |
01d3240a | 5250 | FN(msg_pop_data), \ |
7dac3ae4 AS |
5251 | FN(rc_pointer_rel), \ |
5252 | FN(spin_lock), \ | |
281f9e75 MKL |
5253 | FN(spin_unlock), \ |
5254 | FN(sk_fullsock), \ | |
5cce85c6 | 5255 | FN(tcp_sock), \ |
ef776a27 | 5256 | FN(skb_ecn_set_ce), \ |
253c8dde LB |
5257 | FN(get_listener_sock), \ |
5258 | FN(skc_lookup_tcp), \ | |
196398d4 AI |
5259 | FN(tcp_check_syncookie), \ |
5260 | FN(sysctl_get_name), \ | |
5261 | FN(sysctl_get_current_value), \ | |
5262 | FN(sysctl_get_new_value), \ | |
b457e553 AI |
5263 | FN(sysctl_set_new_value), \ |
5264 | FN(strtol), \ | |
948d930e MKL |
5265 | FN(strtoul), \ |
5266 | FN(sk_storage_get), \ | |
edaccf89 | 5267 | FN(sk_storage_delete), \ |
3745ee18 | 5268 | FN(send_signal), \ |
a7658e1a | 5269 | FN(tcp_gen_syncookie), \ |
6ae08ae3 DB |
5270 | FN(skb_output), \ |
5271 | FN(probe_read_user), \ | |
5272 | FN(probe_read_kernel), \ | |
5273 | FN(probe_read_user_str), \ | |
17328d61 | 5274 | FN(probe_read_kernel_str), \ |
8482941f | 5275 | FN(tcp_send_ack), \ |
0a49c1a8 | 5276 | FN(send_signal_thread), \ |
67306f84 | 5277 | FN(jiffies64), \ |
b4490c5c | 5278 | FN(read_branch_records), \ |
d831ee84 | 5279 | FN(get_ns_current_pid_tgid), \ |
f318903c | 5280 | FN(xdp_output), \ |
0f09abd1 | 5281 | FN(get_netns_cookie), \ |
cf7fbe66 | 5282 | FN(get_current_ancestor_cgroup_id), \ |
71d19214 | 5283 | FN(sk_assign), \ |
492e639f YS |
5284 | FN(ktime_get_boot_ns), \ |
5285 | FN(seq_printf), \ | |
f307fa2c AI |
5286 | FN(seq_write), \ |
5287 | FN(sk_cgroup_id), \ | |
457f4436 AN |
5288 | FN(sk_ancestor_cgroup_id), \ |
5289 | FN(ringbuf_output), \ | |
5290 | FN(ringbuf_reserve), \ | |
5291 | FN(ringbuf_submit), \ | |
5292 | FN(ringbuf_discard), \ | |
7cdec54f | 5293 | FN(ringbuf_query), \ |
af7ec138 | 5294 | FN(csum_level), \ |
478cfbdf YS |
5295 | FN(skc_to_tcp6_sock), \ |
5296 | FN(skc_to_tcp_sock), \ | |
5297 | FN(skc_to_tcp_timewait_sock), \ | |
0d4fad3e | 5298 | FN(skc_to_tcp_request_sock), \ |
fa28dcb8 SL |
5299 | FN(skc_to_udp6_sock), \ |
5300 | FN(get_task_stack), \ | |
0813a841 MKL |
5301 | FN(load_hdr_opt), \ |
5302 | FN(store_hdr_opt), \ | |
8ea63684 KS |
5303 | FN(reserve_hdr_opt), \ |
5304 | FN(inode_storage_get), \ | |
5305 | FN(inode_storage_delete), \ | |
6e22ab9d | 5306 | FN(d_path), \ |
07be4c4a | 5307 | FN(copy_from_user), \ |
c4d0bfb4 | 5308 | FN(snprintf_btf), \ |
eb411377 | 5309 | FN(seq_printf_btf), \ |
b426ce83 | 5310 | FN(skb_cgroup_classid), \ |
b4ab3141 | 5311 | FN(redirect_neigh), \ |
b7906b70 AN |
5312 | FN(per_cpu_ptr), \ |
5313 | FN(this_cpu_ptr), \ | |
9aa1206e | 5314 | FN(redirect_peer), \ |
4cf1bc1f KS |
5315 | FN(task_storage_get), \ |
5316 | FN(task_storage_delete), \ | |
3ca1032a | 5317 | FN(get_current_task_btf), \ |
3f6719c7 | 5318 | FN(bprm_opts_set), \ |
d0551261 | 5319 | FN(ktime_get_coarse_ns), \ |
27672f0d | 5320 | FN(ima_inode_hash), \ |
4f19cab7 | 5321 | FN(sock_from_file), \ |
34b2021c | 5322 | FN(check_mtu), \ |
69c087ba | 5323 | FN(for_each_map_elem), \ |
7b15523a | 5324 | FN(snprintf), \ |
79a7f8bd | 5325 | FN(sys_bpf), \ |
3d78417b | 5326 | FN(btf_find_by_name_kind), \ |
3abea089 | 5327 | FN(sys_close), \ |
b00628b1 AS |
5328 | FN(timer_init), \ |
5329 | FN(timer_set_callback), \ | |
5330 | FN(timer_start), \ | |
5331 | FN(timer_cancel), \ | |
9b99edca | 5332 | FN(get_func_ip), \ |
7adfc6c9 | 5333 | FN(get_attach_cookie), \ |
dd6e10fb | 5334 | FN(task_pt_regs), \ |
856c02db | 5335 | FN(get_branch_snapshot), \ |
10aceb62 | 5336 | FN(trace_vprintk), \ |
9eeb3aa3 | 5337 | FN(skc_to_unix_sock), \ |
d6aef08a | 5338 | FN(kallsyms_lookup_name), \ |
7c7e3d31 | 5339 | FN(find_vma), \ |
e6f2dd0f | 5340 | FN(loop), \ |
c5fb1993 | 5341 | FN(strncmp), \ |
f92c1e18 JO |
5342 | FN(get_func_arg), \ |
5343 | FN(get_func_ret), \ | |
5344 | FN(get_func_arg_cnt), \ | |
b44123b4 YZ |
5345 | FN(get_retval), \ |
5346 | FN(set_retval), \ | |
0165cc81 | 5347 | FN(xdp_get_buff_len), \ |
3f364222 LB |
5348 | FN(xdp_load_bytes), \ |
5349 | FN(xdp_store_bytes), \ | |
376040e4 | 5350 | FN(copy_from_user_task), \ |
9bb984f2 | 5351 | FN(skb_set_tstamp), \ |
174b1694 | 5352 | FN(ima_file_hash), \ |
c0a5a21c | 5353 | FN(kptr_xchg), \ |
fa28dcb8 | 5354 | /* */ |
0cb34dc2 | 5355 | |
971e827b ACM |
5356 | /* integer value in 'imm' field of BPF_CALL instruction selects which helper |
5357 | * function eBPF program intends to call | |
5358 | */ | |
0cb34dc2 | 5359 | #define __BPF_ENUM_FN(x) BPF_FUNC_ ## x |
971e827b | 5360 | enum bpf_func_id { |
0cb34dc2 | 5361 | __BPF_FUNC_MAPPER(__BPF_ENUM_FN) |
971e827b ACM |
5362 | __BPF_FUNC_MAX_ID, |
5363 | }; | |
0cb34dc2 | 5364 | #undef __BPF_ENUM_FN |
971e827b ACM |
5365 | |
5366 | /* All flags used by eBPF helper functions, placed here. */ | |
5367 | ||
5368 | /* BPF_FUNC_skb_store_bytes flags. */ | |
1aae4bdd AN |
5369 | enum { |
5370 | BPF_F_RECOMPUTE_CSUM = (1ULL << 0), | |
5371 | BPF_F_INVALIDATE_HASH = (1ULL << 1), | |
5372 | }; | |
971e827b ACM |
5373 | |
5374 | /* BPF_FUNC_l3_csum_replace and BPF_FUNC_l4_csum_replace flags. | |
5375 | * First 4 bits are for passing the header field size. | |
5376 | */ | |
1aae4bdd AN |
5377 | enum { |
5378 | BPF_F_HDR_FIELD_MASK = 0xfULL, | |
5379 | }; | |
971e827b ACM |
5380 | |
5381 | /* BPF_FUNC_l4_csum_replace flags. */ | |
1aae4bdd AN |
5382 | enum { |
5383 | BPF_F_PSEUDO_HDR = (1ULL << 4), | |
5384 | BPF_F_MARK_MANGLED_0 = (1ULL << 5), | |
5385 | BPF_F_MARK_ENFORCE = (1ULL << 6), | |
5386 | }; | |
971e827b ACM |
5387 | |
5388 | /* BPF_FUNC_clone_redirect and BPF_FUNC_redirect flags. */ | |
1aae4bdd AN |
5389 | enum { |
5390 | BPF_F_INGRESS = (1ULL << 0), | |
5391 | }; | |
971e827b ACM |
5392 | |
5393 | /* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */ | |
1aae4bdd AN |
5394 | enum { |
5395 | BPF_F_TUNINFO_IPV6 = (1ULL << 0), | |
5396 | }; | |
971e827b | 5397 | |
de2ff05f | 5398 | /* flags for both BPF_FUNC_get_stackid and BPF_FUNC_get_stack. */ |
1aae4bdd AN |
5399 | enum { |
5400 | BPF_F_SKIP_FIELD_MASK = 0xffULL, | |
5401 | BPF_F_USER_STACK = (1ULL << 8), | |
de2ff05f | 5402 | /* flags used by BPF_FUNC_get_stackid only. */ |
1aae4bdd AN |
5403 | BPF_F_FAST_STACK_CMP = (1ULL << 9), |
5404 | BPF_F_REUSE_STACKID = (1ULL << 10), | |
de2ff05f | 5405 | /* flags used by BPF_FUNC_get_stack only. */ |
1aae4bdd AN |
5406 | BPF_F_USER_BUILD_ID = (1ULL << 11), |
5407 | }; | |
971e827b ACM |
5408 | |
5409 | /* BPF_FUNC_skb_set_tunnel_key flags. */ | |
1aae4bdd AN |
5410 | enum { |
5411 | BPF_F_ZERO_CSUM_TX = (1ULL << 1), | |
5412 | BPF_F_DONT_FRAGMENT = (1ULL << 2), | |
5413 | BPF_F_SEQ_NUMBER = (1ULL << 3), | |
5414 | }; | |
971e827b | 5415 | |
e27afb84 AS |
5416 | /* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and |
5417 | * BPF_FUNC_perf_event_read_value flags. | |
5418 | */ | |
1aae4bdd AN |
5419 | enum { |
5420 | BPF_F_INDEX_MASK = 0xffffffffULL, | |
5421 | BPF_F_CURRENT_CPU = BPF_F_INDEX_MASK, | |
791cceb8 | 5422 | /* BPF_FUNC_perf_event_output for sk_buff input context. */ |
1aae4bdd AN |
5423 | BPF_F_CTXLEN_MASK = (0xfffffULL << 32), |
5424 | }; | |
971e827b | 5425 | |
f71c6143 | 5426 | /* Current network namespace */ |
1aae4bdd AN |
5427 | enum { |
5428 | BPF_F_CURRENT_NETNS = (-1L), | |
5429 | }; | |
f71c6143 | 5430 | |
7cdec54f DB |
5431 | /* BPF_FUNC_csum_level level values. */ |
5432 | enum { | |
5433 | BPF_CSUM_LEVEL_QUERY, | |
5434 | BPF_CSUM_LEVEL_INC, | |
5435 | BPF_CSUM_LEVEL_DEC, | |
5436 | BPF_CSUM_LEVEL_RESET, | |
5437 | }; | |
5438 | ||
6c408dec | 5439 | /* BPF_FUNC_skb_adjust_room flags. */ |
1aae4bdd AN |
5440 | enum { |
5441 | BPF_F_ADJ_ROOM_FIXED_GSO = (1ULL << 0), | |
5442 | BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 = (1ULL << 1), | |
5443 | BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 = (1ULL << 2), | |
5444 | BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3), | |
5445 | BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4), | |
836e66c2 | 5446 | BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5), |
d01b59c9 | 5447 | BPF_F_ADJ_ROOM_ENCAP_L2_ETH = (1ULL << 6), |
1aae4bdd | 5448 | }; |
6c408dec | 5449 | |
1aae4bdd AN |
5450 | enum { |
5451 | BPF_ADJ_ROOM_ENCAP_L2_MASK = 0xff, | |
5452 | BPF_ADJ_ROOM_ENCAP_L2_SHIFT = 56, | |
5453 | }; | |
1db04c30 | 5454 | |
bfb35c27 | 5455 | #define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ |
1db04c30 AM |
5456 | BPF_ADJ_ROOM_ENCAP_L2_MASK) \ |
5457 | << BPF_ADJ_ROOM_ENCAP_L2_SHIFT) | |
6c408dec | 5458 | |
196398d4 | 5459 | /* BPF_FUNC_sysctl_get_name flags. */ |
1aae4bdd AN |
5460 | enum { |
5461 | BPF_F_SYSCTL_BASE_NAME = (1ULL << 0), | |
5462 | }; | |
196398d4 | 5463 | |
f836a56e | 5464 | /* BPF_FUNC_<kernel_obj>_storage_get flags */ |
1aae4bdd | 5465 | enum { |
f836a56e KS |
5466 | BPF_LOCAL_STORAGE_GET_F_CREATE = (1ULL << 0), |
5467 | /* BPF_SK_STORAGE_GET_F_CREATE is only kept for backward compatibility | |
5468 | * and BPF_LOCAL_STORAGE_GET_F_CREATE must be used instead. | |
5469 | */ | |
5470 | BPF_SK_STORAGE_GET_F_CREATE = BPF_LOCAL_STORAGE_GET_F_CREATE, | |
1aae4bdd | 5471 | }; |
948d930e | 5472 | |
67306f84 | 5473 | /* BPF_FUNC_read_branch_records flags. */ |
1aae4bdd AN |
5474 | enum { |
5475 | BPF_F_GET_BRANCH_RECORDS_SIZE = (1ULL << 0), | |
5476 | }; | |
67306f84 | 5477 | |
457f4436 AN |
5478 | /* BPF_FUNC_bpf_ringbuf_commit, BPF_FUNC_bpf_ringbuf_discard, and |
5479 | * BPF_FUNC_bpf_ringbuf_output flags. | |
5480 | */ | |
5481 | enum { | |
5482 | BPF_RB_NO_WAKEUP = (1ULL << 0), | |
5483 | BPF_RB_FORCE_WAKEUP = (1ULL << 1), | |
5484 | }; | |
5485 | ||
5486 | /* BPF_FUNC_bpf_ringbuf_query flags */ | |
5487 | enum { | |
5488 | BPF_RB_AVAIL_DATA = 0, | |
5489 | BPF_RB_RING_SIZE = 1, | |
5490 | BPF_RB_CONS_POS = 2, | |
5491 | BPF_RB_PROD_POS = 3, | |
5492 | }; | |
5493 | ||
5494 | /* BPF ring buffer constants */ | |
5495 | enum { | |
5496 | BPF_RINGBUF_BUSY_BIT = (1U << 31), | |
5497 | BPF_RINGBUF_DISCARD_BIT = (1U << 30), | |
5498 | BPF_RINGBUF_HDR_SZ = 8, | |
5499 | }; | |
5500 | ||
a352b32a JS |
5501 | /* BPF_FUNC_sk_assign flags in bpf_sk_lookup context. */ |
5502 | enum { | |
5503 | BPF_SK_LOOKUP_F_REPLACE = (1ULL << 0), | |
5504 | BPF_SK_LOOKUP_F_NO_REUSEPORT = (1ULL << 1), | |
5505 | }; | |
5506 | ||
2be7e212 DB |
5507 | /* Mode for BPF_FUNC_skb_adjust_room helper. */ |
5508 | enum bpf_adj_room_mode { | |
d62c1d72 | 5509 | BPF_ADJ_ROOM_NET, |
6c408dec | 5510 | BPF_ADJ_ROOM_MAC, |
2be7e212 DB |
5511 | }; |
5512 | ||
32b3652c DB |
5513 | /* Mode for BPF_FUNC_skb_load_bytes_relative helper. */ |
5514 | enum bpf_hdr_start_off { | |
5515 | BPF_HDR_START_MAC, | |
5516 | BPF_HDR_START_NET, | |
5517 | }; | |
5518 | ||
c99a84ea MX |
5519 | /* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */ |
5520 | enum bpf_lwt_encap_mode { | |
5521 | BPF_LWT_ENCAP_SEG6, | |
755db477 PO |
5522 | BPF_LWT_ENCAP_SEG6_INLINE, |
5523 | BPF_LWT_ENCAP_IP, | |
c99a84ea MX |
5524 | }; |
5525 | ||
3f6719c7 KS |
5526 | /* Flags for bpf_bprm_opts_set helper */ |
5527 | enum { | |
5528 | BPF_F_BPRM_SECUREEXEC = (1ULL << 0), | |
5529 | }; | |
5530 | ||
e624d4ed HL |
5531 | /* Flags for bpf_redirect_map helper */ |
5532 | enum { | |
5533 | BPF_F_BROADCAST = (1ULL << 3), | |
5534 | BPF_F_EXCLUDE_INGRESS = (1ULL << 4), | |
5535 | }; | |
5536 | ||
b7df9ada DB |
5537 | #define __bpf_md_ptr(type, name) \ |
5538 | union { \ | |
5539 | type name; \ | |
5540 | __u64 :64; \ | |
5541 | } __attribute__((aligned(8))) | |
5542 | ||
8d21ec0e | 5543 | enum { |
9bb984f2 MKL |
5544 | BPF_SKB_TSTAMP_UNSPEC, |
5545 | BPF_SKB_TSTAMP_DELIVERY_MONO, /* tstamp has mono delivery time */ | |
5546 | /* For any BPF_SKB_TSTAMP_* that the bpf prog cannot handle, | |
5547 | * the bpf prog should handle it like BPF_SKB_TSTAMP_UNSPEC | |
5548 | * and try to deduce it by ingress, egress or skb->sk->sk_clockid. | |
5549 | */ | |
8d21ec0e MKL |
5550 | }; |
5551 | ||
971e827b ACM |
5552 | /* user accessible mirror of in-kernel sk_buff. |
5553 | * new fields can only be added to the end of this structure | |
5554 | */ | |
5555 | struct __sk_buff { | |
5556 | __u32 len; | |
5557 | __u32 pkt_type; | |
5558 | __u32 mark; | |
5559 | __u32 queue_mapping; | |
5560 | __u32 protocol; | |
5561 | __u32 vlan_present; | |
5562 | __u32 vlan_tci; | |
5563 | __u32 vlan_proto; | |
5564 | __u32 priority; | |
5565 | __u32 ingress_ifindex; | |
5566 | __u32 ifindex; | |
5567 | __u32 tc_index; | |
5568 | __u32 cb[5]; | |
5569 | __u32 hash; | |
5570 | __u32 tc_classid; | |
5571 | __u32 data; | |
5572 | __u32 data_end; | |
b1d9fc41 | 5573 | __u32 napi_id; |
69e8cc13 | 5574 | |
ac29991b | 5575 | /* Accessed by BPF_PROG_TYPE_sk_skb types from here to ... */ |
69e8cc13 JF |
5576 | __u32 family; |
5577 | __u32 remote_ip4; /* Stored in network byte order */ | |
5578 | __u32 local_ip4; /* Stored in network byte order */ | |
5579 | __u32 remote_ip6[4]; /* Stored in network byte order */ | |
5580 | __u32 local_ip6[4]; /* Stored in network byte order */ | |
5581 | __u32 remote_port; /* Stored in network byte order */ | |
5582 | __u32 local_port; /* stored in host byte order */ | |
ac29991b DB |
5583 | /* ... here. */ |
5584 | ||
5585 | __u32 data_meta; | |
b7df9ada | 5586 | __bpf_md_ptr(struct bpf_flow_keys *, flow_keys); |
f11216b2 | 5587 | __u64 tstamp; |
e3da08d0 | 5588 | __u32 wire_len; |
d9ff286a | 5589 | __u32 gso_segs; |
281f9e75 | 5590 | __bpf_md_ptr(struct bpf_sock *, sk); |
b0ac4941 | 5591 | __u32 gso_size; |
9bb984f2 | 5592 | __u8 tstamp_type; |
8d21ec0e | 5593 | __u32 :24; /* Padding, future use. */ |
f64c4ace | 5594 | __u64 hwtstamp; |
971e827b ACM |
5595 | }; |
5596 | ||
5597 | struct bpf_tunnel_key { | |
5598 | __u32 tunnel_id; | |
5599 | union { | |
5600 | __u32 remote_ipv4; | |
5601 | __u32 remote_ipv6[4]; | |
5602 | }; | |
5603 | __u8 tunnel_tos; | |
5604 | __u8 tunnel_ttl; | |
6b6a1925 | 5605 | __u16 tunnel_ext; /* Padding, future use. */ |
971e827b ACM |
5606 | __u32 tunnel_label; |
5607 | }; | |
5608 | ||
29a36f9e EB |
5609 | /* user accessible mirror of in-kernel xfrm_state. |
5610 | * new fields can only be added to the end of this structure | |
5611 | */ | |
5612 | struct bpf_xfrm_state { | |
5613 | __u32 reqid; | |
5614 | __u32 spi; /* Stored in network byte order */ | |
5615 | __u16 family; | |
6b6a1925 | 5616 | __u16 ext; /* Padding, future use. */ |
29a36f9e EB |
5617 | union { |
5618 | __u32 remote_ipv4; /* Stored in network byte order */ | |
5619 | __u32 remote_ipv6[4]; /* Stored in network byte order */ | |
5620 | }; | |
5621 | }; | |
5622 | ||
0cb34dc2 JS |
5623 | /* Generic BPF return codes which all BPF program types may support. |
5624 | * The values are binary compatible with their TC_ACT_* counter-part to | |
5625 | * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT | |
5626 | * programs. | |
5627 | * | |
5628 | * XDP is handled seprately, see XDP_*. | |
5629 | */ | |
5630 | enum bpf_ret_code { | |
5631 | BPF_OK = 0, | |
5632 | /* 1 reserved */ | |
5633 | BPF_DROP = 2, | |
5634 | /* 3-6 reserved */ | |
5635 | BPF_REDIRECT = 7, | |
755db477 PO |
5636 | /* >127 are reserved for prog type specific return codes. |
5637 | * | |
5638 | * BPF_LWT_REROUTE: used by BPF_PROG_TYPE_LWT_IN and | |
5639 | * BPF_PROG_TYPE_LWT_XMIT to indicate that skb had been | |
5640 | * changed and should be routed based on its new L3 header. | |
5641 | * (This is an L3 redirect, as opposed to L2 redirect | |
5642 | * represented by BPF_REDIRECT above). | |
5643 | */ | |
5644 | BPF_LWT_REROUTE = 128, | |
0cb34dc2 JS |
5645 | }; |
5646 | ||
5647 | struct bpf_sock { | |
5648 | __u32 bound_dev_if; | |
5649 | __u32 family; | |
5650 | __u32 type; | |
5651 | __u32 protocol; | |
ac29991b DB |
5652 | __u32 mark; |
5653 | __u32 priority; | |
281f9e75 MKL |
5654 | /* IP address also allows 1 and 2 bytes access */ |
5655 | __u32 src_ip4; | |
5656 | __u32 src_ip6[4]; | |
5657 | __u32 src_port; /* host byte order */ | |
8f50f16f JS |
5658 | __be16 dst_port; /* network byte order */ |
5659 | __u16 :16; /* zero padding */ | |
281f9e75 MKL |
5660 | __u32 dst_ip4; |
5661 | __u32 dst_ip6[4]; | |
5662 | __u32 state; | |
df8fe57c | 5663 | __s32 rx_queue_mapping; |
281f9e75 MKL |
5664 | }; |
5665 | ||
5666 | struct bpf_tcp_sock { | |
5667 | __u32 snd_cwnd; /* Sending congestion window */ | |
5668 | __u32 srtt_us; /* smoothed round trip time << 3 in usecs */ | |
5669 | __u32 rtt_min; | |
5670 | __u32 snd_ssthresh; /* Slow start size threshold */ | |
5671 | __u32 rcv_nxt; /* What we want to receive next */ | |
5672 | __u32 snd_nxt; /* Next sequence we send */ | |
5673 | __u32 snd_una; /* First byte we want an ack for */ | |
5674 | __u32 mss_cache; /* Cached effective mss, not including SACKS */ | |
5675 | __u32 ecn_flags; /* ECN status bits. */ | |
5676 | __u32 rate_delivered; /* saved rate sample: packets delivered */ | |
5677 | __u32 rate_interval_us; /* saved rate sample: time elapsed */ | |
5678 | __u32 packets_out; /* Packets which are "in flight" */ | |
5679 | __u32 retrans_out; /* Retransmitted packets out */ | |
5680 | __u32 total_retrans; /* Total retransmits for entire connection */ | |
5681 | __u32 segs_in; /* RFC4898 tcpEStatsPerfSegsIn | |
5682 | * total number of segments in. | |
5683 | */ | |
5684 | __u32 data_segs_in; /* RFC4898 tcpEStatsPerfDataSegsIn | |
5685 | * total number of data segments in. | |
5686 | */ | |
5687 | __u32 segs_out; /* RFC4898 tcpEStatsPerfSegsOut | |
5688 | * The total number of segments sent. | |
5689 | */ | |
5690 | __u32 data_segs_out; /* RFC4898 tcpEStatsPerfDataSegsOut | |
5691 | * total number of data segments sent. | |
1d436885 | 5692 | */ |
281f9e75 MKL |
5693 | __u32 lost_out; /* Lost packets */ |
5694 | __u32 sacked_out; /* SACK'd packets */ | |
5695 | __u64 bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived | |
5696 | * sum(delta(rcv_nxt)), or how many bytes | |
5697 | * were acked. | |
1d436885 | 5698 | */ |
281f9e75 MKL |
5699 | __u64 bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked |
5700 | * sum(delta(snd_una)), or how many bytes | |
5701 | * were acked. | |
1d436885 | 5702 | */ |
692cbaa9 SF |
5703 | __u32 dsack_dups; /* RFC4898 tcpEStatsStackDSACKDups |
5704 | * total number of DSACK blocks received | |
5705 | */ | |
5706 | __u32 delivered; /* Total data packets delivered incl. rexmits */ | |
5707 | __u32 delivered_ce; /* Like the above but only ECE marked packets */ | |
5708 | __u32 icsk_retransmits; /* Number of unrecovered [RTO] timeouts */ | |
0cb34dc2 JS |
5709 | }; |
5710 | ||
6acc9b43 JS |
5711 | struct bpf_sock_tuple { |
5712 | union { | |
5713 | struct { | |
5714 | __be32 saddr; | |
5715 | __be32 daddr; | |
5716 | __be16 sport; | |
5717 | __be16 dport; | |
5718 | } ipv4; | |
5719 | struct { | |
5720 | __be32 saddr[4]; | |
5721 | __be32 daddr[4]; | |
5722 | __be16 sport; | |
5723 | __be16 dport; | |
5724 | } ipv6; | |
5725 | }; | |
5726 | }; | |
5727 | ||
91eda599 JL |
5728 | struct bpf_xdp_sock { |
5729 | __u32 queue_id; | |
5730 | }; | |
5731 | ||
0cb34dc2 JS |
5732 | #define XDP_PACKET_HEADROOM 256 |
5733 | ||
791cceb8 ACM |
5734 | /* User return codes for XDP prog type. |
5735 | * A valid XDP program must return one of these defined values. All other | |
ac29991b DB |
5736 | * return codes are reserved for future use. Unknown return codes will |
5737 | * result in packet drops and a warning via bpf_warn_invalid_xdp_action(). | |
791cceb8 ACM |
5738 | */ |
5739 | enum xdp_action { | |
5740 | XDP_ABORTED = 0, | |
5741 | XDP_DROP, | |
5742 | XDP_PASS, | |
5743 | XDP_TX, | |
ac29991b | 5744 | XDP_REDIRECT, |
791cceb8 ACM |
5745 | }; |
5746 | ||
5747 | /* user accessible metadata for XDP packet hook | |
5748 | * new fields must be added to the end of this structure | |
5749 | */ | |
5750 | struct xdp_md { | |
5751 | __u32 data; | |
5752 | __u32 data_end; | |
ac29991b | 5753 | __u32 data_meta; |
e7b2823a JDB |
5754 | /* Below access go through struct xdp_rxq_info */ |
5755 | __u32 ingress_ifindex; /* rxq->dev->ifindex */ | |
5756 | __u32 rx_queue_index; /* rxq->queue_index */ | |
64b59025 DA |
5757 | |
5758 | __u32 egress_ifindex; /* txq->dev->ifindex */ | |
791cceb8 ACM |
5759 | }; |
5760 | ||
042b1545 JDB |
5761 | /* DEVMAP map-value layout |
5762 | * | |
5763 | * The struct data-layout of map-value is a configuration interface. | |
5764 | * New members can only be added to the end of this structure. | |
5765 | */ | |
5766 | struct bpf_devmap_val { | |
5767 | __u32 ifindex; /* device index */ | |
5768 | union { | |
5769 | int fd; /* prog fd on map write */ | |
5770 | __u32 id; /* prog id on map read */ | |
5771 | } bpf_prog; | |
5772 | }; | |
5773 | ||
644bfe51 LB |
5774 | /* CPUMAP map-value layout |
5775 | * | |
5776 | * The struct data-layout of map-value is a configuration interface. | |
5777 | * New members can only be added to the end of this structure. | |
5778 | */ | |
5779 | struct bpf_cpumap_val { | |
5780 | __u32 qsize; /* queue size to remote target CPU */ | |
92164774 LB |
5781 | union { |
5782 | int fd; /* prog fd on map write */ | |
5783 | __u32 id; /* prog id on map read */ | |
5784 | } bpf_prog; | |
644bfe51 LB |
5785 | }; |
5786 | ||
69e8cc13 | 5787 | enum sk_action { |
bfa64075 JF |
5788 | SK_DROP = 0, |
5789 | SK_PASS, | |
69e8cc13 JF |
5790 | }; |
5791 | ||
82a86168 JF |
5792 | /* user accessible metadata for SK_MSG packet hook, new fields must |
5793 | * be added to the end of this structure | |
5794 | */ | |
5795 | struct sk_msg_md { | |
b7df9ada DB |
5796 | __bpf_md_ptr(void *, data); |
5797 | __bpf_md_ptr(void *, data_end); | |
4da0dcab JF |
5798 | |
5799 | __u32 family; | |
5800 | __u32 remote_ip4; /* Stored in network byte order */ | |
5801 | __u32 local_ip4; /* Stored in network byte order */ | |
5802 | __u32 remote_ip6[4]; /* Stored in network byte order */ | |
5803 | __u32 local_ip6[4]; /* Stored in network byte order */ | |
5804 | __u32 remote_port; /* Stored in network byte order */ | |
5805 | __u32 local_port; /* stored in host byte order */ | |
584e4681 | 5806 | __u32 size; /* Total size of sk_msg */ |
13d70f5a JF |
5807 | |
5808 | __bpf_md_ptr(struct bpf_sock *, sk); /* current socket */ | |
82a86168 JF |
5809 | }; |
5810 | ||
3bd43a8c MKL |
5811 | struct sk_reuseport_md { |
5812 | /* | |
5813 | * Start of directly accessible data. It begins from | |
5814 | * the tcp/udp header. | |
5815 | */ | |
b7df9ada DB |
5816 | __bpf_md_ptr(void *, data); |
5817 | /* End of directly accessible data */ | |
5818 | __bpf_md_ptr(void *, data_end); | |
3bd43a8c MKL |
5819 | /* |
5820 | * Total length of packet (starting from the tcp/udp header). | |
5821 | * Note that the directly accessible bytes (data_end - data) | |
5822 | * could be less than this "len". Those bytes could be | |
5823 | * indirectly read by a helper "bpf_skb_load_bytes()". | |
5824 | */ | |
5825 | __u32 len; | |
5826 | /* | |
5827 | * Eth protocol in the mac header (network byte order). e.g. | |
5828 | * ETH_P_IP(0x0800) and ETH_P_IPV6(0x86DD) | |
5829 | */ | |
5830 | __u32 eth_protocol; | |
5831 | __u32 ip_protocol; /* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */ | |
5832 | __u32 bind_inany; /* Is sock bound to an INANY address? */ | |
5833 | __u32 hash; /* A hash of the packet 4 tuples */ | |
d5e4ddae KI |
5834 | /* When reuse->migrating_sk is NULL, it is selecting a sk for the |
5835 | * new incoming connection request (e.g. selecting a listen sk for | |
5836 | * the received SYN in the TCP case). reuse->sk is one of the sk | |
5837 | * in the reuseport group. The bpf prog can use reuse->sk to learn | |
5838 | * the local listening ip/port without looking into the skb. | |
5839 | * | |
5840 | * When reuse->migrating_sk is not NULL, reuse->sk is closed and | |
5841 | * reuse->migrating_sk is the socket that needs to be migrated | |
5842 | * to another listening socket. migrating_sk could be a fullsock | |
5843 | * sk that is fully established or a reqsk that is in-the-middle | |
5844 | * of 3-way handshake. | |
5845 | */ | |
e0610476 | 5846 | __bpf_md_ptr(struct bpf_sock *, sk); |
d5e4ddae | 5847 | __bpf_md_ptr(struct bpf_sock *, migrating_sk); |
3bd43a8c MKL |
5848 | }; |
5849 | ||
95b9afd3 MKL |
5850 | #define BPF_TAG_SIZE 8 |
5851 | ||
5852 | struct bpf_prog_info { | |
5853 | __u32 type; | |
5854 | __u32 id; | |
5855 | __u8 tag[BPF_TAG_SIZE]; | |
5856 | __u32 jited_prog_len; | |
5857 | __u32 xlated_prog_len; | |
5858 | __aligned_u64 jited_prog_insns; | |
5859 | __aligned_u64 xlated_prog_insns; | |
88cda1c9 MKL |
5860 | __u64 load_time; /* ns since boottime */ |
5861 | __u32 created_by_uid; | |
5862 | __u32 nr_map_ids; | |
5863 | __aligned_u64 map_ids; | |
e27afb84 | 5864 | char name[BPF_OBJ_NAME_LEN]; |
675fc275 | 5865 | __u32 ifindex; |
fb6ef42b | 5866 | __u32 gpl_compatible:1; |
0472301a | 5867 | __u32 :31; /* alignment pad */ |
675fc275 JK |
5868 | __u64 netns_dev; |
5869 | __u64 netns_ino; | |
dd0c5f07 | 5870 | __u32 nr_jited_ksyms; |
bd980d43 | 5871 | __u32 nr_jited_func_lens; |
dd0c5f07 | 5872 | __aligned_u64 jited_ksyms; |
bd980d43 | 5873 | __aligned_u64 jited_func_lens; |
cc19435c YS |
5874 | __u32 btf_id; |
5875 | __u32 func_info_rec_size; | |
5876 | __aligned_u64 func_info; | |
b4f8623c YS |
5877 | __u32 nr_func_info; |
5878 | __u32 nr_line_info; | |
ee491d8d MKL |
5879 | __aligned_u64 line_info; |
5880 | __aligned_u64 jited_line_info; | |
b4f8623c | 5881 | __u32 nr_jited_line_info; |
ee491d8d MKL |
5882 | __u32 line_info_rec_size; |
5883 | __u32 jited_line_info_rec_size; | |
eb896a69 SL |
5884 | __u32 nr_prog_tags; |
5885 | __aligned_u64 prog_tags; | |
b1eca86d AS |
5886 | __u64 run_time_ns; |
5887 | __u64 run_cnt; | |
9ed9e9ba | 5888 | __u64 recursion_misses; |
aba64c7d | 5889 | __u32 verified_insns; |
95b9afd3 MKL |
5890 | } __attribute__((aligned(8))); |
5891 | ||
5892 | struct bpf_map_info { | |
5893 | __u32 type; | |
5894 | __u32 id; | |
5895 | __u32 key_size; | |
5896 | __u32 value_size; | |
5897 | __u32 max_entries; | |
5898 | __u32 map_flags; | |
067cae47 | 5899 | char name[BPF_OBJ_NAME_LEN]; |
52775b33 | 5900 | __u32 ifindex; |
17328d61 | 5901 | __u32 btf_vmlinux_value_type_id; |
52775b33 JK |
5902 | __u64 netns_dev; |
5903 | __u64 netns_ino; | |
7a01f6a3 | 5904 | __u32 btf_id; |
f03b15d3 MKL |
5905 | __u32 btf_key_type_id; |
5906 | __u32 btf_value_type_id; | |
8845b468 | 5907 | __u32 :32; /* alignment pad */ |
9330986c | 5908 | __u64 map_extra; |
7a01f6a3 MKL |
5909 | } __attribute__((aligned(8))); |
5910 | ||
5911 | struct bpf_btf_info { | |
5912 | __aligned_u64 btf; | |
5913 | __u32 btf_size; | |
5914 | __u32 id; | |
53297220 AN |
5915 | __aligned_u64 name; |
5916 | __u32 name_len; | |
5917 | __u32 kernel_btf; | |
95b9afd3 MKL |
5918 | } __attribute__((aligned(8))); |
5919 | ||
f2e10bff AN |
5920 | struct bpf_link_info { |
5921 | __u32 type; | |
5922 | __u32 id; | |
5923 | __u32 prog_id; | |
5924 | union { | |
5925 | struct { | |
5926 | __aligned_u64 tp_name; /* in/out: tp_name buffer ptr */ | |
5927 | __u32 tp_name_len; /* in/out: tp_name buffer len */ | |
5928 | } raw_tracepoint; | |
5929 | struct { | |
5930 | __u32 attach_type; | |
441e8c66 THJ |
5931 | __u32 target_obj_id; /* prog_id for PROG_EXT, otherwise btf object id */ |
5932 | __u32 target_btf_id; /* BTF type id inside the object */ | |
f2e10bff AN |
5933 | } tracing; |
5934 | struct { | |
5935 | __u64 cgroup_id; | |
5936 | __u32 attach_type; | |
5937 | } cgroup; | |
6b0a249a YS |
5938 | struct { |
5939 | __aligned_u64 target_name; /* in/out: target_name buffer ptr */ | |
5940 | __u32 target_name_len; /* in/out: target_name buffer len */ | |
5941 | union { | |
b0c9eb37 YS |
5942 | struct { |
5943 | __u32 map_id; | |
5944 | } map; | |
5945 | }; | |
6b0a249a | 5946 | } iter; |
7f045a49 JS |
5947 | struct { |
5948 | __u32 netns_ino; | |
5949 | __u32 attach_type; | |
5950 | } netns; | |
dc8698ca AN |
5951 | struct { |
5952 | __u32 ifindex; | |
5953 | } xdp; | |
f2e10bff AN |
5954 | }; |
5955 | } __attribute__((aligned(8))); | |
5956 | ||
e50b0a6f AI |
5957 | /* User bpf_sock_addr struct to access socket fields and sockaddr struct passed |
5958 | * by user and intended to be used by socket (e.g. to bind to, depends on | |
bfdfa517 | 5959 | * attach type). |
e50b0a6f AI |
5960 | */ |
5961 | struct bpf_sock_addr { | |
5962 | __u32 user_family; /* Allows 4-byte read, but no write. */ | |
5963 | __u32 user_ip4; /* Allows 1,2,4-byte read and 4-byte write. | |
5964 | * Stored in network byte order. | |
5965 | */ | |
073a4834 | 5966 | __u32 user_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. |
e50b0a6f AI |
5967 | * Stored in network byte order. |
5968 | */ | |
7aebfa1b | 5969 | __u32 user_port; /* Allows 1,2,4-byte read and 4-byte write. |
e50b0a6f AI |
5970 | * Stored in network byte order |
5971 | */ | |
5972 | __u32 family; /* Allows 4-byte read, but no write */ | |
5973 | __u32 type; /* Allows 4-byte read, but no write */ | |
5974 | __u32 protocol; /* Allows 4-byte read, but no write */ | |
4cfacbe6 | 5975 | __u32 msg_src_ip4; /* Allows 1,2,4-byte read and 4-byte write. |
3024cf82 AI |
5976 | * Stored in network byte order. |
5977 | */ | |
073a4834 | 5978 | __u32 msg_src_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. |
3024cf82 AI |
5979 | * Stored in network byte order. |
5980 | */ | |
cd17d777 | 5981 | __bpf_md_ptr(struct bpf_sock *, sk); |
e50b0a6f AI |
5982 | }; |
5983 | ||
04df41e3 LB |
5984 | /* User bpf_sock_ops struct to access socket values and specify request ops |
5985 | * and their replies. | |
f1d6cb2d ACM |
5986 | * Some of this fields are in network (bigendian) byte order and may need |
5987 | * to be converted before use (bpf_ntohl() defined in samples/bpf/bpf_endian.h). | |
04df41e3 LB |
5988 | * New fields can only be added at the end of this structure |
5989 | */ | |
5990 | struct bpf_sock_ops { | |
5991 | __u32 op; | |
5992 | union { | |
d6d4f60c LB |
5993 | __u32 args[4]; /* Optionally passed to bpf program */ |
5994 | __u32 reply; /* Returned by bpf program */ | |
5995 | __u32 replylong[4]; /* Optionally returned by bpf prog */ | |
04df41e3 LB |
5996 | }; |
5997 | __u32 family; | |
f1d6cb2d ACM |
5998 | __u32 remote_ip4; /* Stored in network byte order */ |
5999 | __u32 local_ip4; /* Stored in network byte order */ | |
6000 | __u32 remote_ip6[4]; /* Stored in network byte order */ | |
6001 | __u32 local_ip6[4]; /* Stored in network byte order */ | |
6002 | __u32 remote_port; /* Stored in network byte order */ | |
6003 | __u32 local_port; /* stored in host byte order */ | |
e7b2823a JDB |
6004 | __u32 is_fullsock; /* Some TCP fields are only valid if |
6005 | * there is a full socket. If not, the | |
6006 | * fields read as zero. | |
6007 | */ | |
6008 | __u32 snd_cwnd; | |
6009 | __u32 srtt_us; /* Averaged RTT << 3 in usecs */ | |
d6d4f60c LB |
6010 | __u32 bpf_sock_ops_cb_flags; /* flags defined in uapi/linux/tcp.h */ |
6011 | __u32 state; | |
6012 | __u32 rtt_min; | |
6013 | __u32 snd_ssthresh; | |
6014 | __u32 rcv_nxt; | |
6015 | __u32 snd_nxt; | |
6016 | __u32 snd_una; | |
6017 | __u32 mss_cache; | |
6018 | __u32 ecn_flags; | |
6019 | __u32 rate_delivered; | |
6020 | __u32 rate_interval_us; | |
6021 | __u32 packets_out; | |
6022 | __u32 retrans_out; | |
6023 | __u32 total_retrans; | |
6024 | __u32 segs_in; | |
6025 | __u32 data_segs_in; | |
6026 | __u32 segs_out; | |
6027 | __u32 data_segs_out; | |
6028 | __u32 lost_out; | |
6029 | __u32 sacked_out; | |
6030 | __u32 sk_txhash; | |
6031 | __u64 bytes_received; | |
6032 | __u64 bytes_acked; | |
cd17d777 | 6033 | __bpf_md_ptr(struct bpf_sock *, sk); |
0813a841 MKL |
6034 | /* [skb_data, skb_data_end) covers the whole TCP header. |
6035 | * | |
6036 | * BPF_SOCK_OPS_PARSE_HDR_OPT_CB: The packet received | |
6037 | * BPF_SOCK_OPS_HDR_OPT_LEN_CB: Not useful because the | |
6038 | * header has not been written. | |
6039 | * BPF_SOCK_OPS_WRITE_HDR_OPT_CB: The header and options have | |
6040 | * been written so far. | |
6041 | * BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB: The SYNACK that concludes | |
6042 | * the 3WHS. | |
6043 | * BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB: The ACK that concludes | |
6044 | * the 3WHS. | |
6045 | * | |
6046 | * bpf_load_hdr_opt() can also be used to read a particular option. | |
6047 | */ | |
6048 | __bpf_md_ptr(void *, skb_data); | |
6049 | __bpf_md_ptr(void *, skb_data_end); | |
6050 | __u32 skb_len; /* The total length of a packet. | |
6051 | * It includes the header, options, | |
6052 | * and payload. | |
6053 | */ | |
6054 | __u32 skb_tcp_flags; /* tcp_flags of the header. It provides | |
6055 | * an easy way to check for tcp_flags | |
6056 | * without parsing skb_data. | |
6057 | * | |
6058 | * In particular, the skb_tcp_flags | |
6059 | * will still be available in | |
6060 | * BPF_SOCK_OPS_HDR_OPT_LEN even though | |
6061 | * the outgoing header has not | |
6062 | * been written yet. | |
6063 | */ | |
04df41e3 LB |
6064 | }; |
6065 | ||
d6d4f60c | 6066 | /* Definitions for bpf_sock_ops_cb_flags */ |
1aae4bdd AN |
6067 | enum { |
6068 | BPF_SOCK_OPS_RTO_CB_FLAG = (1<<0), | |
6069 | BPF_SOCK_OPS_RETRANS_CB_FLAG = (1<<1), | |
6070 | BPF_SOCK_OPS_STATE_CB_FLAG = (1<<2), | |
6071 | BPF_SOCK_OPS_RTT_CB_FLAG = (1<<3), | |
0813a841 MKL |
6072 | /* Call bpf for all received TCP headers. The bpf prog will be |
6073 | * called under sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB | |
6074 | * | |
6075 | * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB | |
6076 | * for the header option related helpers that will be useful | |
6077 | * to the bpf programs. | |
6078 | * | |
6079 | * It could be used at the client/active side (i.e. connect() side) | |
6080 | * when the server told it that the server was in syncookie | |
6081 | * mode and required the active side to resend the bpf-written | |
6082 | * options. The active side can keep writing the bpf-options until | |
6083 | * it received a valid packet from the server side to confirm | |
6084 | * the earlier packet (and options) has been received. The later | |
6085 | * example patch is using it like this at the active side when the | |
6086 | * server is in syncookie mode. | |
6087 | * | |
6088 | * The bpf prog will usually turn this off in the common cases. | |
6089 | */ | |
6090 | BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG = (1<<4), | |
6091 | /* Call bpf when kernel has received a header option that | |
6092 | * the kernel cannot handle. The bpf prog will be called under | |
6093 | * sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB. | |
6094 | * | |
6095 | * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB | |
6096 | * for the header option related helpers that will be useful | |
6097 | * to the bpf programs. | |
6098 | */ | |
00d211a4 | 6099 | BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG = (1<<5), |
0813a841 MKL |
6100 | /* Call bpf when the kernel is writing header options for the |
6101 | * outgoing packet. The bpf prog will first be called | |
6102 | * to reserve space in a skb under | |
6103 | * sock_ops->op == BPF_SOCK_OPS_HDR_OPT_LEN_CB. Then | |
6104 | * the bpf prog will be called to write the header option(s) | |
6105 | * under sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB. | |
6106 | * | |
6107 | * Please refer to the comment in BPF_SOCK_OPS_HDR_OPT_LEN_CB | |
6108 | * and BPF_SOCK_OPS_WRITE_HDR_OPT_CB for the header option | |
6109 | * related helpers that will be useful to the bpf programs. | |
6110 | * | |
6111 | * The kernel gets its chance to reserve space and write | |
6112 | * options first before the BPF program does. | |
6113 | */ | |
331fca43 | 6114 | BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG = (1<<6), |
1aae4bdd | 6115 | /* Mask of all currently supported cb flags */ |
331fca43 | 6116 | BPF_SOCK_OPS_ALL_CB_FLAGS = 0x7F, |
1aae4bdd | 6117 | }; |
d6d4f60c | 6118 | |
04df41e3 LB |
6119 | /* List of known BPF sock_ops operators. |
6120 | * New entries can only be added at the end | |
6121 | */ | |
6122 | enum { | |
6123 | BPF_SOCK_OPS_VOID, | |
6124 | BPF_SOCK_OPS_TIMEOUT_INIT, /* Should return SYN-RTO value to use or | |
6125 | * -1 if default value should be used | |
6126 | */ | |
6127 | BPF_SOCK_OPS_RWND_INIT, /* Should return initial advertized | |
6128 | * window (in packets) or -1 if default | |
6129 | * value should be used | |
6130 | */ | |
6131 | BPF_SOCK_OPS_TCP_CONNECT_CB, /* Calls BPF program right before an | |
6132 | * active connection is initialized | |
6133 | */ | |
6134 | BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB, /* Calls BPF program when an | |
6135 | * active connection is | |
6136 | * established | |
6137 | */ | |
6138 | BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB, /* Calls BPF program when a | |
6139 | * passive connection is | |
6140 | * established | |
6141 | */ | |
6142 | BPF_SOCK_OPS_NEEDS_ECN, /* If connection's congestion control | |
6143 | * needs ECN | |
6144 | */ | |
e27afb84 AS |
6145 | BPF_SOCK_OPS_BASE_RTT, /* Get base RTT. The correct value is |
6146 | * based on the path and may be | |
6147 | * dependent on the congestion control | |
6148 | * algorithm. In general it indicates | |
6149 | * a congestion threshold. RTTs above | |
6150 | * this indicate congestion | |
6151 | */ | |
d6d4f60c LB |
6152 | BPF_SOCK_OPS_RTO_CB, /* Called when an RTO has triggered. |
6153 | * Arg1: value of icsk_retransmits | |
6154 | * Arg2: value of icsk_rto | |
6155 | * Arg3: whether RTO has expired | |
6156 | */ | |
6157 | BPF_SOCK_OPS_RETRANS_CB, /* Called when skb is retransmitted. | |
6158 | * Arg1: sequence number of 1st byte | |
6159 | * Arg2: # segments | |
6160 | * Arg3: return value of | |
6161 | * tcp_transmit_skb (0 => success) | |
6162 | */ | |
6163 | BPF_SOCK_OPS_STATE_CB, /* Called when TCP changes state. | |
6164 | * Arg1: old_state | |
6165 | * Arg2: new_state | |
6166 | */ | |
060a7fcc AI |
6167 | BPF_SOCK_OPS_TCP_LISTEN_CB, /* Called on listen(2), right after |
6168 | * socket transition to LISTEN state. | |
6169 | */ | |
692cbaa9 SF |
6170 | BPF_SOCK_OPS_RTT_CB, /* Called on every RTT. |
6171 | */ | |
0813a841 MKL |
6172 | BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option. |
6173 | * It will be called to handle | |
6174 | * the packets received at | |
6175 | * an already established | |
6176 | * connection. | |
6177 | * | |
6178 | * sock_ops->skb_data: | |
6179 | * Referring to the received skb. | |
6180 | * It covers the TCP header only. | |
6181 | * | |
6182 | * bpf_load_hdr_opt() can also | |
6183 | * be used to search for a | |
6184 | * particular option. | |
6185 | */ | |
6186 | BPF_SOCK_OPS_HDR_OPT_LEN_CB, /* Reserve space for writing the | |
6187 | * header option later in | |
6188 | * BPF_SOCK_OPS_WRITE_HDR_OPT_CB. | |
6189 | * Arg1: bool want_cookie. (in | |
6190 | * writing SYNACK only) | |
6191 | * | |
6192 | * sock_ops->skb_data: | |
6193 | * Not available because no header has | |
6194 | * been written yet. | |
6195 | * | |
6196 | * sock_ops->skb_tcp_flags: | |
6197 | * The tcp_flags of the | |
6198 | * outgoing skb. (e.g. SYN, ACK, FIN). | |
6199 | * | |
6200 | * bpf_reserve_hdr_opt() should | |
6201 | * be used to reserve space. | |
6202 | */ | |
6203 | BPF_SOCK_OPS_WRITE_HDR_OPT_CB, /* Write the header options | |
6204 | * Arg1: bool want_cookie. (in | |
6205 | * writing SYNACK only) | |
6206 | * | |
6207 | * sock_ops->skb_data: | |
6208 | * Referring to the outgoing skb. | |
6209 | * It covers the TCP header | |
6210 | * that has already been written | |
6211 | * by the kernel and the | |
6212 | * earlier bpf-progs. | |
6213 | * | |
6214 | * sock_ops->skb_tcp_flags: | |
6215 | * The tcp_flags of the outgoing | |
6216 | * skb. (e.g. SYN, ACK, FIN). | |
6217 | * | |
6218 | * bpf_store_hdr_opt() should | |
6219 | * be used to write the | |
6220 | * option. | |
6221 | * | |
6222 | * bpf_load_hdr_opt() can also | |
6223 | * be used to search for a | |
6224 | * particular option that | |
6225 | * has already been written | |
6226 | * by the kernel or the | |
6227 | * earlier bpf-progs. | |
6228 | */ | |
d6d4f60c LB |
6229 | }; |
6230 | ||
6231 | /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect | |
6232 | * changes between the TCP and BPF versions. Ideally this should never happen. | |
6233 | * If it does, we need to add code to convert them before calling | |
6234 | * the BPF sock_ops function. | |
6235 | */ | |
6236 | enum { | |
6237 | BPF_TCP_ESTABLISHED = 1, | |
6238 | BPF_TCP_SYN_SENT, | |
6239 | BPF_TCP_SYN_RECV, | |
6240 | BPF_TCP_FIN_WAIT1, | |
6241 | BPF_TCP_FIN_WAIT2, | |
6242 | BPF_TCP_TIME_WAIT, | |
6243 | BPF_TCP_CLOSE, | |
6244 | BPF_TCP_CLOSE_WAIT, | |
6245 | BPF_TCP_LAST_ACK, | |
6246 | BPF_TCP_LISTEN, | |
6247 | BPF_TCP_CLOSING, /* Now a valid state */ | |
6248 | BPF_TCP_NEW_SYN_RECV, | |
6249 | ||
6250 | BPF_TCP_MAX_STATES /* Leave at the end! */ | |
04df41e3 LB |
6251 | }; |
6252 | ||
1aae4bdd AN |
6253 | enum { |
6254 | TCP_BPF_IW = 1001, /* Set TCP initial congestion window */ | |
6255 | TCP_BPF_SNDCWND_CLAMP = 1002, /* Set sndcwnd_clamp */ | |
2b8ee4f0 | 6256 | TCP_BPF_DELACK_MAX = 1003, /* Max delay ack in usecs */ |
ca584ba0 | 6257 | TCP_BPF_RTO_MIN = 1004, /* Min delay ack in usecs */ |
0813a841 MKL |
6258 | /* Copy the SYN pkt to optval |
6259 | * | |
6260 | * BPF_PROG_TYPE_SOCK_OPS only. It is similar to the | |
6261 | * bpf_getsockopt(TCP_SAVED_SYN) but it does not limit | |
6262 | * to only getting from the saved_syn. It can either get the | |
6263 | * syn packet from: | |
6264 | * | |
6265 | * 1. the just-received SYN packet (only available when writing the | |
6266 | * SYNACK). It will be useful when it is not necessary to | |
6267 | * save the SYN packet for latter use. It is also the only way | |
6268 | * to get the SYN during syncookie mode because the syn | |
6269 | * packet cannot be saved during syncookie. | |
6270 | * | |
6271 | * OR | |
6272 | * | |
6273 | * 2. the earlier saved syn which was done by | |
6274 | * bpf_setsockopt(TCP_SAVE_SYN). | |
6275 | * | |
6276 | * The bpf_getsockopt(TCP_BPF_SYN*) option will hide where the | |
6277 | * SYN packet is obtained. | |
6278 | * | |
6279 | * If the bpf-prog does not need the IP[46] header, the | |
6280 | * bpf-prog can avoid parsing the IP header by using | |
6281 | * TCP_BPF_SYN. Otherwise, the bpf-prog can get both | |
6282 | * IP[46] and TCP header by using TCP_BPF_SYN_IP. | |
6283 | * | |
6284 | * >0: Total number of bytes copied | |
6285 | * -ENOSPC: Not enough space in optval. Only optlen number of | |
6286 | * bytes is copied. | |
6287 | * -ENOENT: The SYN skb is not available now and the earlier SYN pkt | |
6288 | * is not saved by setsockopt(TCP_SAVE_SYN). | |
6289 | */ | |
6290 | TCP_BPF_SYN = 1005, /* Copy the TCP header */ | |
6291 | TCP_BPF_SYN_IP = 1006, /* Copy the IP[46] and TCP header */ | |
267cf9fa | 6292 | TCP_BPF_SYN_MAC = 1007, /* Copy the MAC, IP[46], and TCP header */ |
0813a841 MKL |
6293 | }; |
6294 | ||
6295 | enum { | |
6296 | BPF_LOAD_HDR_OPT_TCP_SYN = (1ULL << 0), | |
6297 | }; | |
6298 | ||
6299 | /* args[0] value during BPF_SOCK_OPS_HDR_OPT_LEN_CB and | |
6300 | * BPF_SOCK_OPS_WRITE_HDR_OPT_CB. | |
6301 | */ | |
6302 | enum { | |
6303 | BPF_WRITE_HDR_TCP_CURRENT_MSS = 1, /* Kernel is finding the | |
6304 | * total option spaces | |
6305 | * required for an established | |
6306 | * sk in order to calculate the | |
6307 | * MSS. No skb is actually | |
6308 | * sent. | |
6309 | */ | |
6310 | BPF_WRITE_HDR_TCP_SYNACK_COOKIE = 2, /* Kernel is in syncookie mode | |
6311 | * when sending a SYN. | |
6312 | */ | |
1aae4bdd | 6313 | }; |
04df41e3 | 6314 | |
e27afb84 AS |
6315 | struct bpf_perf_event_value { |
6316 | __u64 counter; | |
6317 | __u64 enabled; | |
6318 | __u64 running; | |
6319 | }; | |
6320 | ||
1aae4bdd AN |
6321 | enum { |
6322 | BPF_DEVCG_ACC_MKNOD = (1ULL << 0), | |
6323 | BPF_DEVCG_ACC_READ = (1ULL << 1), | |
6324 | BPF_DEVCG_ACC_WRITE = (1ULL << 2), | |
6325 | }; | |
ebc614f6 | 6326 | |
1aae4bdd AN |
6327 | enum { |
6328 | BPF_DEVCG_DEV_BLOCK = (1ULL << 0), | |
6329 | BPF_DEVCG_DEV_CHAR = (1ULL << 1), | |
6330 | }; | |
ebc614f6 RG |
6331 | |
6332 | struct bpf_cgroup_dev_ctx { | |
e7b2823a JDB |
6333 | /* access_type encoded as (BPF_DEVCG_ACC_* << 16) | BPF_DEVCG_DEV_* */ |
6334 | __u32 access_type; | |
ebc614f6 RG |
6335 | __u32 major; |
6336 | __u32 minor; | |
6337 | }; | |
6338 | ||
a0fe3e57 AS |
6339 | struct bpf_raw_tracepoint_args { |
6340 | __u64 args[0]; | |
6341 | }; | |
6342 | ||
cb9c28ef PB |
6343 | /* DIRECT: Skip the FIB rules and go to FIB table associated with device |
6344 | * OUTPUT: Do lookup from egress perspective; default is ingress | |
6345 | */ | |
1aae4bdd AN |
6346 | enum { |
6347 | BPF_FIB_LOOKUP_DIRECT = (1U << 0), | |
6348 | BPF_FIB_LOOKUP_OUTPUT = (1U << 1), | |
6349 | }; | |
cb9c28ef | 6350 | |
9b8ca379 QM |
6351 | enum { |
6352 | BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ | |
6353 | BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */ | |
6354 | BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */ | |
6355 | BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */ | |
6356 | BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */ | |
6357 | BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */ | |
6358 | BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ | |
6359 | BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ | |
6360 | BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ | |
6361 | }; | |
6362 | ||
cb9c28ef | 6363 | struct bpf_fib_lookup { |
6bdd533c SY |
6364 | /* input: network family for lookup (AF_INET, AF_INET6) |
6365 | * output: network family of egress nexthop | |
6366 | */ | |
6367 | __u8 family; | |
cb9c28ef PB |
6368 | |
6369 | /* set if lookup is to consider L4 data - e.g., FIB rules */ | |
6370 | __u8 l4_protocol; | |
6371 | __be16 sport; | |
6372 | __be16 dport; | |
6373 | ||
e1850ea9 JDB |
6374 | union { /* used for MTU check */ |
6375 | /* input to lookup */ | |
6376 | __u16 tot_len; /* L3 length from network hdr (iph->tot_len) */ | |
9b8ca379 | 6377 | |
e1850ea9 JDB |
6378 | /* output: MTU value */ |
6379 | __u16 mtu_result; | |
6380 | }; | |
9b8ca379 QM |
6381 | /* input: L3 device index for lookup |
6382 | * output: device index from FIB lookup | |
6383 | */ | |
6384 | __u32 ifindex; | |
cb9c28ef PB |
6385 | |
6386 | union { | |
6387 | /* inputs to lookup */ | |
6388 | __u8 tos; /* AF_INET */ | |
f568b472 | 6389 | __be32 flowinfo; /* AF_INET6, flow_label + priority */ |
cb9c28ef | 6390 | |
6bdd533c SY |
6391 | /* output: metric of fib result (IPv4/IPv6 only) */ |
6392 | __u32 rt_metric; | |
cb9c28ef PB |
6393 | }; |
6394 | ||
6395 | union { | |
cb9c28ef PB |
6396 | __be32 ipv4_src; |
6397 | __u32 ipv6_src[4]; /* in6_addr; network order */ | |
6398 | }; | |
6399 | ||
6bdd533c SY |
6400 | /* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in |
6401 | * network header. output: bpf_fib_lookup sets to gateway address | |
6402 | * if FIB lookup returns gateway route | |
cb9c28ef PB |
6403 | */ |
6404 | union { | |
cb9c28ef PB |
6405 | __be32 ipv4_dst; |
6406 | __u32 ipv6_dst[4]; /* in6_addr; network order */ | |
6407 | }; | |
6408 | ||
6409 | /* output */ | |
6410 | __be16 h_vlan_proto; | |
6411 | __be16 h_vlan_TCI; | |
6412 | __u8 smac[6]; /* ETH_ALEN */ | |
6413 | __u8 dmac[6]; /* ETH_ALEN */ | |
6414 | }; | |
6415 | ||
ba452c9e THJ |
6416 | struct bpf_redir_neigh { |
6417 | /* network family for lookup (AF_INET, AF_INET6) */ | |
6418 | __u32 nh_family; | |
6419 | /* network address of nexthop; skips fib lookup to find gateway */ | |
6420 | union { | |
6421 | __be32 ipv4_nh; | |
6422 | __u32 ipv6_nh[4]; /* in6_addr; network order */ | |
6423 | }; | |
6424 | }; | |
6425 | ||
34b2021c JDB |
6426 | /* bpf_check_mtu flags*/ |
6427 | enum bpf_check_mtu_flags { | |
6428 | BPF_MTU_CHK_SEGS = (1U << 0), | |
6429 | }; | |
6430 | ||
6431 | enum bpf_check_mtu_ret { | |
6432 | BPF_MTU_CHK_RET_SUCCESS, /* check and lookup successful */ | |
6433 | BPF_MTU_CHK_RET_FRAG_NEEDED, /* fragmentation required to fwd */ | |
6434 | BPF_MTU_CHK_RET_SEGS_TOOBIG, /* GSO re-segmentation needed to fwd */ | |
6435 | }; | |
6436 | ||
30687ad9 YS |
6437 | enum bpf_task_fd_type { |
6438 | BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */ | |
6439 | BPF_FD_TYPE_TRACEPOINT, /* tp name */ | |
6440 | BPF_FD_TYPE_KPROBE, /* (symbol + offset) or addr */ | |
6441 | BPF_FD_TYPE_KRETPROBE, /* (symbol + offset) or addr */ | |
6442 | BPF_FD_TYPE_UPROBE, /* filename + offset */ | |
6443 | BPF_FD_TYPE_URETPROBE, /* filename + offset */ | |
6444 | }; | |
6445 | ||
1aae4bdd AN |
6446 | enum { |
6447 | BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG = (1U << 0), | |
6448 | BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL = (1U << 1), | |
6449 | BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAP = (1U << 2), | |
6450 | }; | |
57debff2 | 6451 | |
2f965e3f PP |
6452 | struct bpf_flow_keys { |
6453 | __u16 nhoff; | |
6454 | __u16 thoff; | |
6455 | __u16 addr_proto; /* ETH_P_* of valid addrs */ | |
6456 | __u8 is_frag; | |
6457 | __u8 is_first_frag; | |
6458 | __u8 is_encap; | |
6459 | __u8 ip_proto; | |
6460 | __be16 n_proto; | |
6461 | __be16 sport; | |
6462 | __be16 dport; | |
6463 | union { | |
6464 | struct { | |
6465 | __be32 ipv4_src; | |
6466 | __be32 ipv4_dst; | |
6467 | }; | |
6468 | struct { | |
6469 | __u32 ipv6_src[4]; /* in6_addr; network order */ | |
6470 | __u32 ipv6_dst[4]; /* in6_addr; network order */ | |
6471 | }; | |
6472 | }; | |
57debff2 | 6473 | __u32 flags; |
71c99e32 | 6474 | __be32 flow_label; |
2f965e3f PP |
6475 | }; |
6476 | ||
cc19435c | 6477 | struct bpf_func_info { |
555249df | 6478 | __u32 insn_off; |
cc19435c YS |
6479 | __u32 type_id; |
6480 | }; | |
6481 | ||
ee491d8d MKL |
6482 | #define BPF_LINE_INFO_LINE_NUM(line_col) ((line_col) >> 10) |
6483 | #define BPF_LINE_INFO_LINE_COL(line_col) ((line_col) & 0x3ff) | |
6484 | ||
6485 | struct bpf_line_info { | |
6486 | __u32 insn_off; | |
6487 | __u32 file_name_off; | |
6488 | __u32 line_off; | |
6489 | __u32 line_col; | |
6490 | }; | |
6491 | ||
7dac3ae4 AS |
6492 | struct bpf_spin_lock { |
6493 | __u32 val; | |
6494 | }; | |
196398d4 | 6495 | |
b00628b1 AS |
6496 | struct bpf_timer { |
6497 | __u64 :64; | |
6498 | __u64 :64; | |
6499 | } __attribute__((aligned(8))); | |
6500 | ||
196398d4 AI |
6501 | struct bpf_sysctl { |
6502 | __u32 write; /* Sysctl is being read (= 0) or written (= 1). | |
6503 | * Allows 1,2,4-byte read, but no write. | |
6504 | */ | |
6505 | __u32 file_pos; /* Sysctl file position to read from, write to. | |
6506 | * Allows 1,2,4-byte read an 4-byte write. | |
6507 | */ | |
6508 | }; | |
6509 | ||
aa6ab647 SF |
6510 | struct bpf_sockopt { |
6511 | __bpf_md_ptr(struct bpf_sock *, sk); | |
6512 | __bpf_md_ptr(void *, optval); | |
6513 | __bpf_md_ptr(void *, optval_end); | |
6514 | ||
6515 | __s32 level; | |
6516 | __s32 optname; | |
6517 | __s32 optlen; | |
6518 | __s32 retval; | |
6519 | }; | |
6520 | ||
b4490c5c CN |
6521 | struct bpf_pidns_info { |
6522 | __u32 pid; | |
6523 | __u32 tgid; | |
6524 | }; | |
a352b32a JS |
6525 | |
6526 | /* User accessible data for SK_LOOKUP programs. Add new fields at the end. */ | |
6527 | struct bpf_sk_lookup { | |
7c32e8f8 LB |
6528 | union { |
6529 | __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */ | |
6530 | __u64 cookie; /* Non-zero if socket was selected in PROG_TEST_RUN */ | |
6531 | }; | |
a352b32a JS |
6532 | |
6533 | __u32 family; /* Protocol family (AF_INET, AF_INET6) */ | |
6534 | __u32 protocol; /* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */ | |
6535 | __u32 remote_ip4; /* Network byte order */ | |
6536 | __u32 remote_ip6[4]; /* Network byte order */ | |
2ed0dc59 JS |
6537 | __be16 remote_port; /* Network byte order */ |
6538 | __u16 :16; /* Zero padding */ | |
a352b32a JS |
6539 | __u32 local_ip4; /* Network byte order */ |
6540 | __u32 local_ip6[4]; /* Network byte order */ | |
6541 | __u32 local_port; /* Host byte order */ | |
f8931565 | 6542 | __u32 ingress_ifindex; /* The arriving interface. Determined by inet_iif. */ |
a352b32a JS |
6543 | }; |
6544 | ||
c4d0bfb4 AM |
6545 | /* |
6546 | * struct btf_ptr is used for typed pointer representation; the | |
6547 | * type id is used to render the pointer data as the appropriate type | |
6548 | * via the bpf_snprintf_btf() helper described above. A flags field - | |
6549 | * potentially to specify additional details about the BTF pointer | |
6550 | * (rather than its mode of display) - is included for future use. | |
6551 | * Display flags - BTF_F_* - are passed to bpf_snprintf_btf separately. | |
6552 | */ | |
6553 | struct btf_ptr { | |
6554 | void *ptr; | |
6555 | __u32 type_id; | |
6556 | __u32 flags; /* BTF ptr flags; unused at present. */ | |
6557 | }; | |
6558 | ||
6559 | /* | |
6560 | * Flags to control bpf_snprintf_btf() behaviour. | |
6561 | * - BTF_F_COMPACT: no formatting around type information | |
6562 | * - BTF_F_NONAME: no struct/union member names/types | |
6563 | * - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values; | |
6564 | * equivalent to %px. | |
6565 | * - BTF_F_ZERO: show zero-valued struct/union members; they | |
6566 | * are not displayed by default | |
6567 | */ | |
6568 | enum { | |
6569 | BTF_F_COMPACT = (1ULL << 0), | |
6570 | BTF_F_NONAME = (1ULL << 1), | |
6571 | BTF_F_PTR_RAW = (1ULL << 2), | |
6572 | BTF_F_ZERO = (1ULL << 3), | |
6573 | }; | |
6574 | ||
46334a0c AS |
6575 | /* bpf_core_relo_kind encodes which aspect of captured field/type/enum value |
6576 | * has to be adjusted by relocations. It is emitted by llvm and passed to | |
6577 | * libbpf and later to the kernel. | |
6578 | */ | |
6579 | enum bpf_core_relo_kind { | |
6580 | BPF_CORE_FIELD_BYTE_OFFSET = 0, /* field byte offset */ | |
6581 | BPF_CORE_FIELD_BYTE_SIZE = 1, /* field size in bytes */ | |
6582 | BPF_CORE_FIELD_EXISTS = 2, /* field existence in target kernel */ | |
6583 | BPF_CORE_FIELD_SIGNED = 3, /* field signedness (0 - unsigned, 1 - signed) */ | |
6584 | BPF_CORE_FIELD_LSHIFT_U64 = 4, /* bitfield-specific left bitshift */ | |
6585 | BPF_CORE_FIELD_RSHIFT_U64 = 5, /* bitfield-specific right bitshift */ | |
6586 | BPF_CORE_TYPE_ID_LOCAL = 6, /* type ID in local BPF object */ | |
6587 | BPF_CORE_TYPE_ID_TARGET = 7, /* type ID in target kernel */ | |
6588 | BPF_CORE_TYPE_EXISTS = 8, /* type existence in target kernel */ | |
6589 | BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */ | |
6590 | BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */ | |
6591 | BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */ | |
6592 | }; | |
6593 | ||
fbd94c7a AS |
6594 | /* |
6595 | * "struct bpf_core_relo" is used to pass relocation data form LLVM to libbpf | |
6596 | * and from libbpf to the kernel. | |
6597 | * | |
6598 | * CO-RE relocation captures the following data: | |
6599 | * - insn_off - instruction offset (in bytes) within a BPF program that needs | |
6600 | * its insn->imm field to be relocated with actual field info; | |
6601 | * - type_id - BTF type ID of the "root" (containing) entity of a relocatable | |
6602 | * type or field; | |
6603 | * - access_str_off - offset into corresponding .BTF string section. String | |
6604 | * interpretation depends on specific relocation kind: | |
6605 | * - for field-based relocations, string encodes an accessed field using | |
6606 | * a sequence of field and array indices, separated by colon (:). It's | |
6607 | * conceptually very close to LLVM's getelementptr ([0]) instruction's | |
6608 | * arguments for identifying offset to a field. | |
6609 | * - for type-based relocations, strings is expected to be just "0"; | |
6610 | * - for enum value-based relocations, string contains an index of enum | |
6611 | * value within its enum type; | |
6612 | * - kind - one of enum bpf_core_relo_kind; | |
6613 | * | |
6614 | * Example: | |
6615 | * struct sample { | |
6616 | * int a; | |
6617 | * struct { | |
6618 | * int b[10]; | |
6619 | * }; | |
6620 | * }; | |
6621 | * | |
6622 | * struct sample *s = ...; | |
6623 | * int *x = &s->a; // encoded as "0:0" (a is field #0) | |
6624 | * int *y = &s->b[5]; // encoded as "0:1:0:5" (anon struct is field #1, | |
6625 | * // b is field #0 inside anon struct, accessing elem #5) | |
6626 | * int *z = &s[10]->b; // encoded as "10:1" (ptr is used as an array) | |
6627 | * | |
6628 | * type_id for all relocs in this example will capture BTF type id of | |
6629 | * `struct sample`. | |
6630 | * | |
6631 | * Such relocation is emitted when using __builtin_preserve_access_index() | |
6632 | * Clang built-in, passing expression that captures field address, e.g.: | |
6633 | * | |
6634 | * bpf_probe_read(&dst, sizeof(dst), | |
6635 | * __builtin_preserve_access_index(&src->a.b.c)); | |
6636 | * | |
6637 | * In this case Clang will emit field relocation recording necessary data to | |
6638 | * be able to find offset of embedded `a.b.c` field within `src` struct. | |
6639 | * | |
6640 | * [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction | |
6641 | */ | |
6642 | struct bpf_core_relo { | |
6643 | __u32 insn_off; | |
6644 | __u32 type_id; | |
6645 | __u32 access_str_off; | |
6646 | enum bpf_core_relo_kind kind; | |
6647 | }; | |
6648 | ||
971e827b | 6649 | #endif /* _UAPI__LINUX_BPF_H__ */ |