Commit | Line | Data |
---|---|---|
1a59d1b8 | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
e5779998 | 2 | /* |
e5779998 DM |
3 | */ |
4 | ||
5 | #include <linux/init.h> | |
36db0456 | 6 | #include <linux/slab.h> |
e5779998 DM |
7 | #include <linux/usb.h> |
8 | #include <linux/usb/audio.h> | |
aafe77cc | 9 | #include <linux/usb/midi.h> |
ad43d528 | 10 | #include <linux/bits.h> |
e5779998 | 11 | |
9e38658f | 12 | #include <sound/control.h> |
e5779998 DM |
13 | #include <sound/core.h> |
14 | #include <sound/info.h> | |
15 | #include <sound/pcm.h> | |
16 | ||
17 | #include "usbaudio.h" | |
18 | #include "card.h" | |
f0b5e634 | 19 | #include "mixer.h" |
7b1eda22 | 20 | #include "mixer_quirks.h" |
e5779998 DM |
21 | #include "midi.h" |
22 | #include "quirks.h" | |
23 | #include "helper.h" | |
24 | #include "endpoint.h" | |
25 | #include "pcm.h" | |
3d8d4dcf | 26 | #include "clock.h" |
e8e8babf | 27 | #include "stream.h" |
e5779998 DM |
28 | |
29 | /* | |
30 | * handle the quirks for the contained interfaces | |
31 | */ | |
32 | static int create_composite_quirk(struct snd_usb_audio *chip, | |
33 | struct usb_interface *iface, | |
34 | struct usb_driver *driver, | |
85a81813 | 35 | const struct snd_usb_audio_quirk *quirk_comp) |
e5779998 DM |
36 | { |
37 | int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber; | |
85a81813 | 38 | const struct snd_usb_audio_quirk *quirk; |
e5779998 DM |
39 | int err; |
40 | ||
85a81813 | 41 | for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { |
e5779998 DM |
42 | iface = usb_ifnum_to_if(chip->dev, quirk->ifnum); |
43 | if (!iface) | |
44 | continue; | |
45 | if (quirk->ifnum != probed_ifnum && | |
46 | usb_interface_claimed(iface)) | |
47 | continue; | |
48 | err = snd_usb_create_quirk(chip, iface, driver, quirk); | |
49 | if (err < 0) | |
50 | return err; | |
d4b8fc66 TI |
51 | } |
52 | ||
85a81813 | 53 | for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { |
d4b8fc66 TI |
54 | iface = usb_ifnum_to_if(chip->dev, quirk->ifnum); |
55 | if (!iface) | |
56 | continue; | |
57 | if (quirk->ifnum != probed_ifnum && | |
58 | !usb_interface_claimed(iface)) | |
e5779998 DM |
59 | usb_driver_claim_interface(driver, iface, (void *)-1L); |
60 | } | |
d4b8fc66 | 61 | |
e5779998 DM |
62 | return 0; |
63 | } | |
64 | ||
65 | static int ignore_interface_quirk(struct snd_usb_audio *chip, | |
66 | struct usb_interface *iface, | |
67 | struct usb_driver *driver, | |
68 | const struct snd_usb_audio_quirk *quirk) | |
69 | { | |
70 | return 0; | |
71 | } | |
72 | ||
73 | ||
74 | /* | |
75 | * Allow alignment on audio sub-slot (channel samples) rather than | |
76 | * on audio slots (audio frames) | |
77 | */ | |
78 | static int create_align_transfer_quirk(struct snd_usb_audio *chip, | |
79 | struct usb_interface *iface, | |
80 | struct usb_driver *driver, | |
81 | const struct snd_usb_audio_quirk *quirk) | |
82 | { | |
83 | chip->txfr_quirk = 1; | |
84 | return 1; /* Continue with creating streams and mixer */ | |
85 | } | |
86 | ||
87 | static int create_any_midi_quirk(struct snd_usb_audio *chip, | |
88 | struct usb_interface *intf, | |
89 | struct usb_driver *driver, | |
90 | const struct snd_usb_audio_quirk *quirk) | |
91 | { | |
92 | return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk); | |
93 | } | |
94 | ||
95 | /* | |
96 | * create a stream for an interface with proper descriptors | |
97 | */ | |
98 | static int create_standard_audio_quirk(struct snd_usb_audio *chip, | |
99 | struct usb_interface *iface, | |
100 | struct usb_driver *driver, | |
101 | const struct snd_usb_audio_quirk *quirk) | |
102 | { | |
103 | struct usb_host_interface *alts; | |
104 | struct usb_interface_descriptor *altsd; | |
105 | int err; | |
106 | ||
e0570446 RW |
107 | if (chip->usb_id == USB_ID(0x1686, 0x00dd)) /* Zoom R16/24 */ |
108 | chip->tx_length_quirk = 1; | |
109 | ||
e5779998 DM |
110 | alts = &iface->altsetting[0]; |
111 | altsd = get_iface_desc(alts); | |
e8e8babf | 112 | err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber); |
e5779998 | 113 | if (err < 0) { |
0ba41d91 | 114 | usb_audio_err(chip, "cannot setup if %d: error %d\n", |
e5779998 DM |
115 | altsd->bInterfaceNumber, err); |
116 | return err; | |
117 | } | |
118 | /* reset the current interface */ | |
119 | usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0); | |
120 | return 0; | |
121 | } | |
122 | ||
123 | /* | |
124 | * create a stream for an endpoint/altsetting without proper descriptors | |
125 | */ | |
126 | static int create_fixed_stream_quirk(struct snd_usb_audio *chip, | |
127 | struct usb_interface *iface, | |
128 | struct usb_driver *driver, | |
129 | const struct snd_usb_audio_quirk *quirk) | |
130 | { | |
131 | struct audioformat *fp; | |
132 | struct usb_host_interface *alts; | |
42d4ab83 | 133 | struct usb_interface_descriptor *altsd; |
e5779998 DM |
134 | int stream, err; |
135 | unsigned *rate_table = NULL; | |
136 | ||
137 | fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL); | |
9ecb2406 | 138 | if (!fp) |
e5779998 | 139 | return -ENOMEM; |
9ecb2406 | 140 | |
836b34a9 | 141 | INIT_LIST_HEAD(&fp->list); |
8866f405 XW |
142 | if (fp->nr_rates > MAX_NR_RATES) { |
143 | kfree(fp); | |
144 | return -EINVAL; | |
145 | } | |
e5779998 | 146 | if (fp->nr_rates > 0) { |
43df2a57 TM |
147 | rate_table = kmemdup(fp->rate_table, |
148 | sizeof(int) * fp->nr_rates, GFP_KERNEL); | |
e5779998 DM |
149 | if (!rate_table) { |
150 | kfree(fp); | |
151 | return -ENOMEM; | |
152 | } | |
e5779998 DM |
153 | fp->rate_table = rate_table; |
154 | } | |
155 | ||
156 | stream = (fp->endpoint & USB_DIR_IN) | |
157 | ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; | |
e8e8babf | 158 | err = snd_usb_add_audio_stream(chip, stream, fp); |
902eb7fd TI |
159 | if (err < 0) |
160 | goto error; | |
e5779998 DM |
161 | if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber || |
162 | fp->altset_idx >= iface->num_altsetting) { | |
902eb7fd TI |
163 | err = -EINVAL; |
164 | goto error; | |
e5779998 DM |
165 | } |
166 | alts = &iface->altsetting[fp->altset_idx]; | |
42d4ab83 | 167 | altsd = get_iface_desc(alts); |
0f886ca1 | 168 | if (altsd->bNumEndpoints < 1) { |
902eb7fd TI |
169 | err = -EINVAL; |
170 | goto error; | |
0f886ca1 TI |
171 | } |
172 | ||
42d4ab83 EZ |
173 | fp->protocol = altsd->bInterfaceProtocol; |
174 | ||
59ea586f MH |
175 | if (fp->datainterval == 0) |
176 | fp->datainterval = snd_usb_parse_datainterval(chip, alts); | |
177 | if (fp->maxpacksize == 0) | |
178 | fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); | |
e5779998 | 179 | usb_set_interface(chip->dev, fp->iface, 0); |
767d75ad DM |
180 | snd_usb_init_pitch(chip, fp->iface, alts, fp); |
181 | snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max); | |
e5779998 | 182 | return 0; |
902eb7fd TI |
183 | |
184 | error: | |
836b34a9 | 185 | list_del(&fp->list); /* unlink for avoiding double-free */ |
902eb7fd TI |
186 | kfree(fp); |
187 | kfree(rate_table); | |
188 | return err; | |
e5779998 DM |
189 | } |
190 | ||
aafe77cc CL |
191 | static int create_auto_pcm_quirk(struct snd_usb_audio *chip, |
192 | struct usb_interface *iface, | |
193 | struct usb_driver *driver) | |
194 | { | |
195 | struct usb_host_interface *alts; | |
196 | struct usb_interface_descriptor *altsd; | |
197 | struct usb_endpoint_descriptor *epd; | |
198 | struct uac1_as_header_descriptor *ashd; | |
199 | struct uac_format_type_i_discrete_descriptor *fmtd; | |
200 | ||
201 | /* | |
202 | * Most Roland/Yamaha audio streaming interfaces have more or less | |
203 | * standard descriptors, but older devices might lack descriptors, and | |
204 | * future ones might change, so ensure that we fail silently if the | |
205 | * interface doesn't look exactly right. | |
206 | */ | |
207 | ||
208 | /* must have a non-zero altsetting for streaming */ | |
209 | if (iface->num_altsetting < 2) | |
210 | return -ENODEV; | |
211 | alts = &iface->altsetting[1]; | |
212 | altsd = get_iface_desc(alts); | |
213 | ||
214 | /* must have an isochronous endpoint for streaming */ | |
215 | if (altsd->bNumEndpoints < 1) | |
216 | return -ENODEV; | |
217 | epd = get_endpoint(alts, 0); | |
218 | if (!usb_endpoint_xfer_isoc(epd)) | |
219 | return -ENODEV; | |
220 | ||
221 | /* must have format descriptors */ | |
222 | ashd = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, | |
223 | UAC_AS_GENERAL); | |
224 | fmtd = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, | |
225 | UAC_FORMAT_TYPE); | |
226 | if (!ashd || ashd->bLength < 7 || | |
227 | !fmtd || fmtd->bLength < 8) | |
228 | return -ENODEV; | |
229 | ||
230 | return create_standard_audio_quirk(chip, iface, driver, NULL); | |
231 | } | |
232 | ||
233 | static int create_yamaha_midi_quirk(struct snd_usb_audio *chip, | |
234 | struct usb_interface *iface, | |
235 | struct usb_driver *driver, | |
236 | struct usb_host_interface *alts) | |
237 | { | |
238 | static const struct snd_usb_audio_quirk yamaha_midi_quirk = { | |
239 | .type = QUIRK_MIDI_YAMAHA | |
240 | }; | |
241 | struct usb_midi_in_jack_descriptor *injd; | |
242 | struct usb_midi_out_jack_descriptor *outjd; | |
243 | ||
244 | /* must have some valid jack descriptors */ | |
245 | injd = snd_usb_find_csint_desc(alts->extra, alts->extralen, | |
246 | NULL, USB_MS_MIDI_IN_JACK); | |
247 | outjd = snd_usb_find_csint_desc(alts->extra, alts->extralen, | |
248 | NULL, USB_MS_MIDI_OUT_JACK); | |
249 | if (!injd && !outjd) | |
250 | return -ENODEV; | |
251 | if (injd && (injd->bLength < 5 || | |
252 | (injd->bJackType != USB_MS_EMBEDDED && | |
253 | injd->bJackType != USB_MS_EXTERNAL))) | |
254 | return -ENODEV; | |
255 | if (outjd && (outjd->bLength < 6 || | |
256 | (outjd->bJackType != USB_MS_EMBEDDED && | |
257 | outjd->bJackType != USB_MS_EXTERNAL))) | |
258 | return -ENODEV; | |
259 | return create_any_midi_quirk(chip, iface, driver, &yamaha_midi_quirk); | |
260 | } | |
261 | ||
262 | static int create_roland_midi_quirk(struct snd_usb_audio *chip, | |
263 | struct usb_interface *iface, | |
264 | struct usb_driver *driver, | |
265 | struct usb_host_interface *alts) | |
266 | { | |
267 | static const struct snd_usb_audio_quirk roland_midi_quirk = { | |
268 | .type = QUIRK_MIDI_ROLAND | |
269 | }; | |
270 | u8 *roland_desc = NULL; | |
271 | ||
272 | /* might have a vendor-specific descriptor <06 24 F1 02 ...> */ | |
273 | for (;;) { | |
274 | roland_desc = snd_usb_find_csint_desc(alts->extra, | |
275 | alts->extralen, | |
276 | roland_desc, 0xf1); | |
277 | if (!roland_desc) | |
278 | return -ENODEV; | |
279 | if (roland_desc[0] < 6 || roland_desc[3] != 2) | |
280 | continue; | |
281 | return create_any_midi_quirk(chip, iface, driver, | |
282 | &roland_midi_quirk); | |
283 | } | |
284 | } | |
285 | ||
286 | static int create_std_midi_quirk(struct snd_usb_audio *chip, | |
287 | struct usb_interface *iface, | |
288 | struct usb_driver *driver, | |
289 | struct usb_host_interface *alts) | |
290 | { | |
291 | struct usb_ms_header_descriptor *mshd; | |
292 | struct usb_ms_endpoint_descriptor *msepd; | |
293 | ||
294 | /* must have the MIDIStreaming interface header descriptor*/ | |
295 | mshd = (struct usb_ms_header_descriptor *)alts->extra; | |
296 | if (alts->extralen < 7 || | |
297 | mshd->bLength < 7 || | |
298 | mshd->bDescriptorType != USB_DT_CS_INTERFACE || | |
299 | mshd->bDescriptorSubtype != USB_MS_HEADER) | |
300 | return -ENODEV; | |
301 | /* must have the MIDIStreaming endpoint descriptor*/ | |
302 | msepd = (struct usb_ms_endpoint_descriptor *)alts->endpoint[0].extra; | |
303 | if (alts->endpoint[0].extralen < 4 || | |
304 | msepd->bLength < 4 || | |
305 | msepd->bDescriptorType != USB_DT_CS_ENDPOINT || | |
306 | msepd->bDescriptorSubtype != UAC_MS_GENERAL || | |
307 | msepd->bNumEmbMIDIJack < 1 || | |
308 | msepd->bNumEmbMIDIJack > 16) | |
309 | return -ENODEV; | |
310 | ||
311 | return create_any_midi_quirk(chip, iface, driver, NULL); | |
312 | } | |
313 | ||
314 | static int create_auto_midi_quirk(struct snd_usb_audio *chip, | |
315 | struct usb_interface *iface, | |
316 | struct usb_driver *driver) | |
317 | { | |
318 | struct usb_host_interface *alts; | |
319 | struct usb_interface_descriptor *altsd; | |
320 | struct usb_endpoint_descriptor *epd; | |
321 | int err; | |
322 | ||
323 | alts = &iface->altsetting[0]; | |
324 | altsd = get_iface_desc(alts); | |
325 | ||
326 | /* must have at least one bulk/interrupt endpoint for streaming */ | |
327 | if (altsd->bNumEndpoints < 1) | |
328 | return -ENODEV; | |
329 | epd = get_endpoint(alts, 0); | |
aa773bfe | 330 | if (!usb_endpoint_xfer_bulk(epd) && |
aafe77cc CL |
331 | !usb_endpoint_xfer_int(epd)) |
332 | return -ENODEV; | |
333 | ||
334 | switch (USB_ID_VENDOR(chip->usb_id)) { | |
335 | case 0x0499: /* Yamaha */ | |
336 | err = create_yamaha_midi_quirk(chip, iface, driver, alts); | |
aa773bfe | 337 | if (err != -ENODEV) |
aafe77cc CL |
338 | return err; |
339 | break; | |
340 | case 0x0582: /* Roland */ | |
341 | err = create_roland_midi_quirk(chip, iface, driver, alts); | |
aa773bfe | 342 | if (err != -ENODEV) |
aafe77cc CL |
343 | return err; |
344 | break; | |
345 | } | |
346 | ||
347 | return create_std_midi_quirk(chip, iface, driver, alts); | |
348 | } | |
349 | ||
350 | static int create_autodetect_quirk(struct snd_usb_audio *chip, | |
351 | struct usb_interface *iface, | |
b1ce7ba6 | 352 | struct usb_driver *driver) |
aafe77cc CL |
353 | { |
354 | int err; | |
355 | ||
356 | err = create_auto_pcm_quirk(chip, iface, driver); | |
357 | if (err == -ENODEV) | |
358 | err = create_auto_midi_quirk(chip, iface, driver); | |
359 | return err; | |
360 | } | |
361 | ||
b1ce7ba6 CL |
362 | static int create_autodetect_quirks(struct snd_usb_audio *chip, |
363 | struct usb_interface *iface, | |
364 | struct usb_driver *driver, | |
365 | const struct snd_usb_audio_quirk *quirk) | |
366 | { | |
367 | int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber; | |
368 | int ifcount, ifnum, err; | |
369 | ||
370 | err = create_autodetect_quirk(chip, iface, driver); | |
371 | if (err < 0) | |
372 | return err; | |
373 | ||
374 | /* | |
375 | * ALSA PCM playback/capture devices cannot be registered in two steps, | |
376 | * so we have to claim the other corresponding interface here. | |
377 | */ | |
378 | ifcount = chip->dev->actconfig->desc.bNumInterfaces; | |
379 | for (ifnum = 0; ifnum < ifcount; ifnum++) { | |
380 | if (ifnum == probed_ifnum || quirk->ifnum >= 0) | |
381 | continue; | |
382 | iface = usb_ifnum_to_if(chip->dev, ifnum); | |
383 | if (!iface || | |
384 | usb_interface_claimed(iface) || | |
385 | get_iface_desc(iface->altsetting)->bInterfaceClass != | |
386 | USB_CLASS_VENDOR_SPEC) | |
387 | continue; | |
388 | ||
389 | err = create_autodetect_quirk(chip, iface, driver); | |
390 | if (err >= 0) | |
391 | usb_driver_claim_interface(driver, iface, (void *)-1L); | |
392 | } | |
393 | ||
394 | return 0; | |
395 | } | |
396 | ||
e5779998 DM |
397 | /* |
398 | * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface. | |
399 | * The only way to detect the sample rate is by looking at wMaxPacketSize. | |
400 | */ | |
401 | static int create_uaxx_quirk(struct snd_usb_audio *chip, | |
402 | struct usb_interface *iface, | |
403 | struct usb_driver *driver, | |
404 | const struct snd_usb_audio_quirk *quirk) | |
405 | { | |
406 | static const struct audioformat ua_format = { | |
015eb0b0 | 407 | .formats = SNDRV_PCM_FMTBIT_S24_3LE, |
e5779998 DM |
408 | .channels = 2, |
409 | .fmt_type = UAC_FORMAT_TYPE_I, | |
410 | .altsetting = 1, | |
411 | .altset_idx = 1, | |
412 | .rates = SNDRV_PCM_RATE_CONTINUOUS, | |
413 | }; | |
414 | struct usb_host_interface *alts; | |
415 | struct usb_interface_descriptor *altsd; | |
416 | struct audioformat *fp; | |
417 | int stream, err; | |
418 | ||
419 | /* both PCM and MIDI interfaces have 2 or more altsettings */ | |
420 | if (iface->num_altsetting < 2) | |
421 | return -ENXIO; | |
422 | alts = &iface->altsetting[1]; | |
423 | altsd = get_iface_desc(alts); | |
424 | ||
425 | if (altsd->bNumEndpoints == 2) { | |
426 | static const struct snd_usb_midi_endpoint_info ua700_ep = { | |
427 | .out_cables = 0x0003, | |
428 | .in_cables = 0x0003 | |
429 | }; | |
430 | static const struct snd_usb_audio_quirk ua700_quirk = { | |
431 | .type = QUIRK_MIDI_FIXED_ENDPOINT, | |
432 | .data = &ua700_ep | |
433 | }; | |
434 | static const struct snd_usb_midi_endpoint_info uaxx_ep = { | |
435 | .out_cables = 0x0001, | |
436 | .in_cables = 0x0001 | |
437 | }; | |
438 | static const struct snd_usb_audio_quirk uaxx_quirk = { | |
439 | .type = QUIRK_MIDI_FIXED_ENDPOINT, | |
440 | .data = &uaxx_ep | |
441 | }; | |
442 | const struct snd_usb_audio_quirk *quirk = | |
443 | chip->usb_id == USB_ID(0x0582, 0x002b) | |
444 | ? &ua700_quirk : &uaxx_quirk; | |
79289e24 TI |
445 | return __snd_usbmidi_create(chip->card, iface, |
446 | &chip->midi_list, quirk, | |
447 | chip->usb_id); | |
e5779998 DM |
448 | } |
449 | ||
450 | if (altsd->bNumEndpoints != 1) | |
451 | return -ENXIO; | |
452 | ||
43df2a57 | 453 | fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL); |
e5779998 DM |
454 | if (!fp) |
455 | return -ENOMEM; | |
e5779998 DM |
456 | |
457 | fp->iface = altsd->bInterfaceNumber; | |
458 | fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress; | |
459 | fp->ep_attr = get_endpoint(alts, 0)->bmAttributes; | |
460 | fp->datainterval = 0; | |
461 | fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); | |
836b34a9 | 462 | INIT_LIST_HEAD(&fp->list); |
e5779998 DM |
463 | |
464 | switch (fp->maxpacksize) { | |
465 | case 0x120: | |
466 | fp->rate_max = fp->rate_min = 44100; | |
467 | break; | |
468 | case 0x138: | |
469 | case 0x140: | |
470 | fp->rate_max = fp->rate_min = 48000; | |
471 | break; | |
472 | case 0x258: | |
473 | case 0x260: | |
474 | fp->rate_max = fp->rate_min = 96000; | |
475 | break; | |
476 | default: | |
0ba41d91 | 477 | usb_audio_err(chip, "unknown sample rate\n"); |
e5779998 DM |
478 | kfree(fp); |
479 | return -ENXIO; | |
480 | } | |
481 | ||
482 | stream = (fp->endpoint & USB_DIR_IN) | |
483 | ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; | |
e8e8babf | 484 | err = snd_usb_add_audio_stream(chip, stream, fp); |
e5779998 | 485 | if (err < 0) { |
836b34a9 | 486 | list_del(&fp->list); /* unlink for avoiding double-free */ |
e5779998 DM |
487 | kfree(fp); |
488 | return err; | |
489 | } | |
490 | usb_set_interface(chip->dev, fp->iface, 0); | |
491 | return 0; | |
492 | } | |
493 | ||
014950b0 DM |
494 | /* |
495 | * Create a standard mixer for the specified interface. | |
496 | */ | |
497 | static int create_standard_mixer_quirk(struct snd_usb_audio *chip, | |
498 | struct usb_interface *iface, | |
499 | struct usb_driver *driver, | |
500 | const struct snd_usb_audio_quirk *quirk) | |
501 | { | |
502 | if (quirk->ifnum < 0) | |
503 | return 0; | |
504 | ||
505 | return snd_usb_create_mixer(chip, quirk->ifnum, 0); | |
506 | } | |
507 | ||
e5779998 DM |
508 | /* |
509 | * audio-interface quirks | |
510 | * | |
511 | * returns zero if no standard audio/MIDI parsing is needed. | |
25985edc | 512 | * returns a positive value if standard audio/midi interfaces are parsed |
e5779998 DM |
513 | * after this. |
514 | * returns a negative value at error. | |
515 | */ | |
516 | int snd_usb_create_quirk(struct snd_usb_audio *chip, | |
517 | struct usb_interface *iface, | |
518 | struct usb_driver *driver, | |
519 | const struct snd_usb_audio_quirk *quirk) | |
520 | { | |
521 | typedef int (*quirk_func_t)(struct snd_usb_audio *, | |
522 | struct usb_interface *, | |
523 | struct usb_driver *, | |
524 | const struct snd_usb_audio_quirk *); | |
525 | static const quirk_func_t quirk_funcs[] = { | |
526 | [QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk, | |
527 | [QUIRK_COMPOSITE] = create_composite_quirk, | |
b1ce7ba6 | 528 | [QUIRK_AUTODETECT] = create_autodetect_quirks, |
e5779998 DM |
529 | [QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk, |
530 | [QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk, | |
531 | [QUIRK_MIDI_YAMAHA] = create_any_midi_quirk, | |
aafe77cc | 532 | [QUIRK_MIDI_ROLAND] = create_any_midi_quirk, |
e5779998 DM |
533 | [QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk, |
534 | [QUIRK_MIDI_NOVATION] = create_any_midi_quirk, | |
c7f57216 | 535 | [QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk, |
e5779998 DM |
536 | [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk, |
537 | [QUIRK_MIDI_CME] = create_any_midi_quirk, | |
4434ade8 | 538 | [QUIRK_MIDI_AKAI] = create_any_midi_quirk, |
1ef0e0a0 | 539 | [QUIRK_MIDI_FTDI] = create_any_midi_quirk, |
1ca8b201 | 540 | [QUIRK_MIDI_CH345] = create_any_midi_quirk, |
e5779998 DM |
541 | [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, |
542 | [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, | |
543 | [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk, | |
014950b0 DM |
544 | [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk, |
545 | [QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk, | |
e5779998 DM |
546 | }; |
547 | ||
548 | if (quirk->type < QUIRK_TYPE_COUNT) { | |
549 | return quirk_funcs[quirk->type](chip, iface, driver, quirk); | |
550 | } else { | |
0ba41d91 | 551 | usb_audio_err(chip, "invalid quirk type %d\n", quirk->type); |
e5779998 DM |
552 | return -ENXIO; |
553 | } | |
554 | } | |
555 | ||
556 | /* | |
557 | * boot quirks | |
558 | */ | |
559 | ||
560 | #define EXTIGY_FIRMWARE_SIZE_OLD 794 | |
561 | #define EXTIGY_FIRMWARE_SIZE_NEW 483 | |
562 | ||
563 | static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf) | |
564 | { | |
565 | struct usb_host_config *config = dev->actconfig; | |
566 | int err; | |
567 | ||
568 | if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD || | |
569 | le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) { | |
0ba41d91 | 570 | dev_dbg(&dev->dev, "sending Extigy boot sequence...\n"); |
e5779998 DM |
571 | /* Send message to force it to reconnect with full interface. */ |
572 | err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0), | |
17d900c4 | 573 | 0x10, 0x43, 0x0001, 0x000a, NULL, 0); |
0ba41d91 TI |
574 | if (err < 0) |
575 | dev_dbg(&dev->dev, "error sending boot message: %d\n", err); | |
e5779998 DM |
576 | err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, |
577 | &dev->descriptor, sizeof(dev->descriptor)); | |
578 | config = dev->actconfig; | |
0ba41d91 TI |
579 | if (err < 0) |
580 | dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); | |
e5779998 | 581 | err = usb_reset_configuration(dev); |
0ba41d91 TI |
582 | if (err < 0) |
583 | dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); | |
584 | dev_dbg(&dev->dev, "extigy_boot: new boot length = %d\n", | |
e5779998 DM |
585 | le16_to_cpu(get_cfg_desc(config)->wTotalLength)); |
586 | return -ENODEV; /* quit this anyway */ | |
587 | } | |
588 | return 0; | |
589 | } | |
590 | ||
591 | static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev) | |
592 | { | |
593 | u8 buf = 1; | |
594 | ||
595 | snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a, | |
596 | USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, | |
17d900c4 | 597 | 0, 0, &buf, 1); |
e5779998 DM |
598 | if (buf == 0) { |
599 | snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29, | |
600 | USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, | |
17d900c4 | 601 | 1, 2000, NULL, 0); |
e5779998 DM |
602 | return -ENODEV; |
603 | } | |
604 | return 0; | |
605 | } | |
606 | ||
0f5733b0 GP |
607 | static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev) |
608 | { | |
609 | int err; | |
610 | ||
611 | if (dev->actconfig->desc.bConfigurationValue == 1) { | |
0ba41d91 | 612 | dev_info(&dev->dev, |
0f5733b0 GP |
613 | "Fast Track Pro switching to config #2\n"); |
614 | /* This function has to be available by the usb core module. | |
615 | * if it is not avialable the boot quirk has to be left out | |
616 | * and the configuration has to be set by udev or hotplug | |
617 | * rules | |
618 | */ | |
619 | err = usb_driver_set_configuration(dev, 2); | |
b98ae272 | 620 | if (err < 0) |
0ba41d91 TI |
621 | dev_dbg(&dev->dev, |
622 | "error usb_driver_set_configuration: %d\n", | |
623 | err); | |
b98ae272 DH |
624 | /* Always return an error, so that we stop creating a device |
625 | that will just be destroyed and recreated with a new | |
626 | configuration */ | |
627 | return -ENODEV; | |
0f5733b0 | 628 | } else |
0ba41d91 | 629 | dev_info(&dev->dev, "Fast Track Pro config OK\n"); |
0f5733b0 GP |
630 | |
631 | return 0; | |
632 | } | |
633 | ||
e5779998 DM |
634 | /* |
635 | * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely | |
636 | * documented in the device's data sheet. | |
637 | */ | |
638 | static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value) | |
639 | { | |
640 | u8 buf[4]; | |
641 | buf[0] = 0x20; | |
642 | buf[1] = value & 0xff; | |
643 | buf[2] = (value >> 8) & 0xff; | |
644 | buf[3] = reg; | |
645 | return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, | |
646 | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, | |
17d900c4 | 647 | 0, 0, &buf, 4); |
e5779998 DM |
648 | } |
649 | ||
650 | static int snd_usb_cm106_boot_quirk(struct usb_device *dev) | |
651 | { | |
652 | /* | |
653 | * Enable line-out driver mode, set headphone source to front | |
654 | * channels, enable stereo mic. | |
655 | */ | |
656 | return snd_usb_cm106_write_int_reg(dev, 2, 0x8004); | |
657 | } | |
658 | ||
659 | /* | |
ad43d528 | 660 | * CM6206 registers from the CM6206 datasheet rev 2.1 |
e5779998 | 661 | */ |
ad43d528 LW |
662 | #define CM6206_REG0_DMA_MASTER BIT(15) |
663 | #define CM6206_REG0_SPDIFO_RATE_48K (2 << 12) | |
664 | #define CM6206_REG0_SPDIFO_RATE_96K (7 << 12) | |
665 | /* Bit 4 thru 11 is the S/PDIF category code */ | |
666 | #define CM6206_REG0_SPDIFO_CAT_CODE_GENERAL (0 << 4) | |
667 | #define CM6206_REG0_SPDIFO_EMPHASIS_CD BIT(3) | |
668 | #define CM6206_REG0_SPDIFO_COPYRIGHT_NA BIT(2) | |
669 | #define CM6206_REG0_SPDIFO_NON_AUDIO BIT(1) | |
670 | #define CM6206_REG0_SPDIFO_PRO_FORMAT BIT(0) | |
671 | ||
672 | #define CM6206_REG1_TEST_SEL_CLK BIT(14) | |
673 | #define CM6206_REG1_PLLBIN_EN BIT(13) | |
674 | #define CM6206_REG1_SOFT_MUTE_EN BIT(12) | |
675 | #define CM6206_REG1_GPIO4_OUT BIT(11) | |
676 | #define CM6206_REG1_GPIO4_OE BIT(10) | |
677 | #define CM6206_REG1_GPIO3_OUT BIT(9) | |
678 | #define CM6206_REG1_GPIO3_OE BIT(8) | |
679 | #define CM6206_REG1_GPIO2_OUT BIT(7) | |
680 | #define CM6206_REG1_GPIO2_OE BIT(6) | |
681 | #define CM6206_REG1_GPIO1_OUT BIT(5) | |
682 | #define CM6206_REG1_GPIO1_OE BIT(4) | |
683 | #define CM6206_REG1_SPDIFO_INVALID BIT(3) | |
684 | #define CM6206_REG1_SPDIF_LOOP_EN BIT(2) | |
685 | #define CM6206_REG1_SPDIFO_DIS BIT(1) | |
686 | #define CM6206_REG1_SPDIFI_MIX BIT(0) | |
687 | ||
688 | #define CM6206_REG2_DRIVER_ON BIT(15) | |
689 | #define CM6206_REG2_HEADP_SEL_SIDE_CHANNELS (0 << 13) | |
690 | #define CM6206_REG2_HEADP_SEL_SURROUND_CHANNELS (1 << 13) | |
691 | #define CM6206_REG2_HEADP_SEL_CENTER_SUBW (2 << 13) | |
692 | #define CM6206_REG2_HEADP_SEL_FRONT_CHANNELS (3 << 13) | |
693 | #define CM6206_REG2_MUTE_HEADPHONE_RIGHT BIT(12) | |
694 | #define CM6206_REG2_MUTE_HEADPHONE_LEFT BIT(11) | |
695 | #define CM6206_REG2_MUTE_REAR_SURROUND_RIGHT BIT(10) | |
696 | #define CM6206_REG2_MUTE_REAR_SURROUND_LEFT BIT(9) | |
697 | #define CM6206_REG2_MUTE_SIDE_SURROUND_RIGHT BIT(8) | |
698 | #define CM6206_REG2_MUTE_SIDE_SURROUND_LEFT BIT(7) | |
699 | #define CM6206_REG2_MUTE_SUBWOOFER BIT(6) | |
700 | #define CM6206_REG2_MUTE_CENTER BIT(5) | |
701 | #define CM6206_REG2_MUTE_RIGHT_FRONT BIT(3) | |
702 | #define CM6206_REG2_MUTE_LEFT_FRONT BIT(3) | |
703 | #define CM6206_REG2_EN_BTL BIT(2) | |
704 | #define CM6206_REG2_MCUCLKSEL_1_5_MHZ (0) | |
705 | #define CM6206_REG2_MCUCLKSEL_3_MHZ (1) | |
706 | #define CM6206_REG2_MCUCLKSEL_6_MHZ (2) | |
707 | #define CM6206_REG2_MCUCLKSEL_12_MHZ (3) | |
708 | ||
709 | /* Bit 11..13 sets the sensitivity to FLY tuner volume control VP/VD signal */ | |
710 | #define CM6206_REG3_FLYSPEED_DEFAULT (2 << 11) | |
711 | #define CM6206_REG3_VRAP25EN BIT(10) | |
712 | #define CM6206_REG3_MSEL1 BIT(9) | |
713 | #define CM6206_REG3_SPDIFI_RATE_44_1K BIT(0 << 7) | |
714 | #define CM6206_REG3_SPDIFI_RATE_48K BIT(2 << 7) | |
715 | #define CM6206_REG3_SPDIFI_RATE_32K BIT(3 << 7) | |
716 | #define CM6206_REG3_PINSEL BIT(6) | |
717 | #define CM6206_REG3_FOE BIT(5) | |
718 | #define CM6206_REG3_ROE BIT(4) | |
719 | #define CM6206_REG3_CBOE BIT(3) | |
720 | #define CM6206_REG3_LOSE BIT(2) | |
721 | #define CM6206_REG3_HPOE BIT(1) | |
722 | #define CM6206_REG3_SPDIFI_CANREC BIT(0) | |
723 | ||
724 | #define CM6206_REG5_DA_RSTN BIT(13) | |
725 | #define CM6206_REG5_AD_RSTN BIT(12) | |
726 | #define CM6206_REG5_SPDIFO_AD2SPDO BIT(12) | |
727 | #define CM6206_REG5_SPDIFO_SEL_FRONT (0 << 9) | |
728 | #define CM6206_REG5_SPDIFO_SEL_SIDE_SUR (1 << 9) | |
729 | #define CM6206_REG5_SPDIFO_SEL_CEN_LFE (2 << 9) | |
730 | #define CM6206_REG5_SPDIFO_SEL_REAR_SUR (3 << 9) | |
731 | #define CM6206_REG5_CODECM BIT(8) | |
732 | #define CM6206_REG5_EN_HPF BIT(7) | |
733 | #define CM6206_REG5_T_SEL_DSDA4 BIT(6) | |
734 | #define CM6206_REG5_T_SEL_DSDA3 BIT(5) | |
735 | #define CM6206_REG5_T_SEL_DSDA2 BIT(4) | |
736 | #define CM6206_REG5_T_SEL_DSDA1 BIT(3) | |
737 | #define CM6206_REG5_T_SEL_DSDAD_NORMAL 0 | |
738 | #define CM6206_REG5_T_SEL_DSDAD_FRONT 4 | |
739 | #define CM6206_REG5_T_SEL_DSDAD_S_SURROUND 5 | |
740 | #define CM6206_REG5_T_SEL_DSDAD_CEN_LFE 6 | |
741 | #define CM6206_REG5_T_SEL_DSDAD_R_SURROUND 7 | |
742 | ||
e5779998 DM |
743 | static int snd_usb_cm6206_boot_quirk(struct usb_device *dev) |
744 | { | |
dac8f847 | 745 | int err = 0, reg; |
ad43d528 LW |
746 | int val[] = { |
747 | /* | |
748 | * Values here are chosen based on sniffing USB traffic | |
749 | * under Windows. | |
750 | * | |
751 | * REG0: DAC is master, sample rate 48kHz, no copyright | |
752 | */ | |
753 | CM6206_REG0_SPDIFO_RATE_48K | | |
754 | CM6206_REG0_SPDIFO_COPYRIGHT_NA, | |
755 | /* | |
756 | * REG1: PLL binary search enable, soft mute enable. | |
757 | */ | |
758 | CM6206_REG1_PLLBIN_EN | | |
f5c9571e | 759 | CM6206_REG1_SOFT_MUTE_EN, |
ad43d528 LW |
760 | /* |
761 | * REG2: enable output drivers, | |
762 | * select front channels to the headphone output, | |
763 | * then mute the headphone channels, run the MCU | |
764 | * at 1.5 MHz. | |
765 | */ | |
766 | CM6206_REG2_DRIVER_ON | | |
767 | CM6206_REG2_HEADP_SEL_FRONT_CHANNELS | | |
768 | CM6206_REG2_MUTE_HEADPHONE_RIGHT | | |
769 | CM6206_REG2_MUTE_HEADPHONE_LEFT, | |
770 | /* | |
771 | * REG3: default flyspeed, set 2.5V mic bias | |
772 | * enable all line out ports and enable SPDIF | |
773 | */ | |
774 | CM6206_REG3_FLYSPEED_DEFAULT | | |
775 | CM6206_REG3_VRAP25EN | | |
776 | CM6206_REG3_FOE | | |
777 | CM6206_REG3_ROE | | |
778 | CM6206_REG3_CBOE | | |
779 | CM6206_REG3_LOSE | | |
780 | CM6206_REG3_HPOE | | |
781 | CM6206_REG3_SPDIFI_CANREC, | |
782 | /* REG4 is just a bunch of GPIO lines */ | |
783 | 0x0000, | |
784 | /* REG5: de-assert AD/DA reset signals */ | |
785 | CM6206_REG5_DA_RSTN | | |
786 | CM6206_REG5_AD_RSTN }; | |
e5779998 DM |
787 | |
788 | for (reg = 0; reg < ARRAY_SIZE(val); reg++) { | |
789 | err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]); | |
790 | if (err < 0) | |
791 | return err; | |
792 | } | |
793 | ||
794 | return err; | |
795 | } | |
796 | ||
19570d74 TI |
797 | /* quirk for Plantronics GameCom 780 with CM6302 chip */ |
798 | static int snd_usb_gamecon780_boot_quirk(struct usb_device *dev) | |
799 | { | |
800 | /* set the initial volume and don't change; other values are either | |
801 | * too loud or silent due to firmware bug (bko#65251) | |
802 | */ | |
542baf94 | 803 | u8 buf[2] = { 0x74, 0xe3 }; |
19570d74 TI |
804 | return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR, |
805 | USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, | |
806 | UAC_FU_VOLUME << 8, 9 << 8, buf, 2); | |
807 | } | |
808 | ||
5e212332 MH |
809 | /* |
810 | * Novation Twitch DJ controller | |
11e424e8 | 811 | * Focusrite Novation Saffire 6 USB audio card |
5e212332 | 812 | */ |
11e424e8 | 813 | static int snd_usb_novation_boot_quirk(struct usb_device *dev) |
5e212332 MH |
814 | { |
815 | /* preemptively set up the device because otherwise the | |
816 | * raw MIDI endpoints are not active */ | |
817 | usb_set_interface(dev, 0, 1); | |
818 | return 0; | |
819 | } | |
820 | ||
e5779998 DM |
821 | /* |
822 | * This call will put the synth in "USB send" mode, i.e it will send MIDI | |
823 | * messages through USB (this is disabled at startup). The synth will | |
824 | * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB | |
825 | * sign on its LCD. Values here are chosen based on sniffing USB traffic | |
826 | * under Windows. | |
827 | */ | |
828 | static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev) | |
829 | { | |
830 | int err, actual_length; | |
e5779998 DM |
831 | /* "midi send" enable */ |
832 | static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 }; | |
801ebf10 | 833 | void *buf; |
e5779998 | 834 | |
801ebf10 TI |
835 | if (snd_usb_pipe_sanity_check(dev, usb_sndintpipe(dev, 0x05))) |
836 | return -EINVAL; | |
837 | buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL); | |
e5779998 DM |
838 | if (!buf) |
839 | return -ENOMEM; | |
840 | err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf, | |
841 | ARRAY_SIZE(seq), &actual_length, 1000); | |
842 | kfree(buf); | |
843 | if (err < 0) | |
844 | return err; | |
845 | ||
846 | return 0; | |
847 | } | |
848 | ||
54a8c500 DM |
849 | /* |
850 | * Some sound cards from Native Instruments are in fact compliant to the USB | |
851 | * audio standard of version 2 and other approved USB standards, even though | |
852 | * they come up as vendor-specific device when first connected. | |
853 | * | |
854 | * However, they can be told to come up with a new set of descriptors | |
855 | * upon their next enumeration, and the interfaces announced by the new | |
856 | * descriptors will then be handled by the kernel's class drivers. As the | |
857 | * product ID will also change, no further checks are required. | |
858 | */ | |
859 | ||
860 | static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) | |
861 | { | |
801ebf10 TI |
862 | int ret; |
863 | ||
864 | if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0))) | |
865 | return -EINVAL; | |
866 | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
54a8c500 | 867 | 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
889d6684 | 868 | 1, 0, NULL, 0, 1000); |
54a8c500 DM |
869 | |
870 | if (ret < 0) | |
871 | return ret; | |
872 | ||
873 | usb_reset_device(dev); | |
874 | ||
875 | /* return -EAGAIN, so the creation of an audio interface for this | |
876 | * temporary device is aborted. The device will reconnect with a | |
877 | * new product ID */ | |
878 | return -EAGAIN; | |
879 | } | |
880 | ||
cb99864d DZ |
881 | static void mbox2_setup_48_24_magic(struct usb_device *dev) |
882 | { | |
883 | u8 srate[3]; | |
884 | u8 temp[12]; | |
885 | ||
886 | /* Choose 48000Hz permanently */ | |
887 | srate[0] = 0x80; | |
888 | srate[1] = 0xbb; | |
889 | srate[2] = 0x00; | |
890 | ||
891 | /* Send the magic! */ | |
892 | snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), | |
893 | 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003); | |
894 | snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), | |
895 | 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003); | |
896 | snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), | |
897 | 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003); | |
898 | snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), | |
899 | 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003); | |
900 | return; | |
901 | } | |
902 | ||
903 | /* Digidesign Mbox 2 needs to load firmware onboard | |
904 | * and driver must wait a few seconds for initialisation. | |
905 | */ | |
906 | ||
907 | #define MBOX2_FIRMWARE_SIZE 646 | |
908 | #define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */ | |
909 | #define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */ | |
910 | ||
b7b435e8 | 911 | static int snd_usb_mbox2_boot_quirk(struct usb_device *dev) |
cb99864d DZ |
912 | { |
913 | struct usb_host_config *config = dev->actconfig; | |
914 | int err; | |
4909a0ca | 915 | u8 bootresponse[0x12]; |
cb99864d DZ |
916 | int fwsize; |
917 | int count; | |
918 | ||
919 | fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength); | |
920 | ||
921 | if (fwsize != MBOX2_FIRMWARE_SIZE) { | |
0ba41d91 | 922 | dev_err(&dev->dev, "Invalid firmware size=%d.\n", fwsize); |
cb99864d DZ |
923 | return -ENODEV; |
924 | } | |
925 | ||
0ba41d91 | 926 | dev_dbg(&dev->dev, "Sending Digidesign Mbox 2 boot sequence...\n"); |
cb99864d DZ |
927 | |
928 | count = 0; | |
b7b435e8 DZ |
929 | bootresponse[0] = MBOX2_BOOT_LOADING; |
930 | while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10)) { | |
cb99864d DZ |
931 | msleep(500); /* 0.5 second delay */ |
932 | snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), | |
933 | /* Control magic - load onboard firmware */ | |
934 | 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012); | |
b7b435e8 | 935 | if (bootresponse[0] == MBOX2_BOOT_READY) |
cb99864d | 936 | break; |
0ba41d91 | 937 | dev_dbg(&dev->dev, "device not ready, resending boot sequence...\n"); |
cb99864d DZ |
938 | count++; |
939 | } | |
940 | ||
b7b435e8 | 941 | if (bootresponse[0] != MBOX2_BOOT_READY) { |
0ba41d91 | 942 | dev_err(&dev->dev, "Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]); |
cb99864d DZ |
943 | return -ENODEV; |
944 | } | |
945 | ||
0ba41d91 | 946 | dev_dbg(&dev->dev, "device initialised!\n"); |
cb99864d DZ |
947 | |
948 | err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, | |
949 | &dev->descriptor, sizeof(dev->descriptor)); | |
950 | config = dev->actconfig; | |
951 | if (err < 0) | |
0ba41d91 | 952 | dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err); |
cb99864d DZ |
953 | |
954 | err = usb_reset_configuration(dev); | |
955 | if (err < 0) | |
0ba41d91 TI |
956 | dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err); |
957 | dev_dbg(&dev->dev, "mbox2_boot: new boot length = %d\n", | |
cb99864d DZ |
958 | le16_to_cpu(get_cfg_desc(config)->wTotalLength)); |
959 | ||
960 | mbox2_setup_48_24_magic(dev); | |
961 | ||
0ba41d91 | 962 | dev_info(&dev->dev, "Digidesign Mbox 2: 24bit 48kHz"); |
cb99864d DZ |
963 | |
964 | return 0; /* Successful boot */ | |
965 | } | |
966 | ||
16bafa79 AA |
967 | static int snd_usb_axefx3_boot_quirk(struct usb_device *dev) |
968 | { | |
969 | int err; | |
970 | ||
971 | dev_dbg(&dev->dev, "Waiting for Axe-Fx III to boot up...\n"); | |
972 | ||
801ebf10 TI |
973 | if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0))) |
974 | return -EINVAL; | |
16bafa79 AA |
975 | /* If the Axe-Fx III has not fully booted, it will timeout when trying |
976 | * to enable the audio streaming interface. A more generous timeout is | |
977 | * used here to detect when the Axe-Fx III has finished booting as the | |
978 | * set interface message will be acked once it has | |
979 | */ | |
980 | err = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
981 | USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, | |
982 | 1, 1, NULL, 0, 120000); | |
983 | if (err < 0) { | |
984 | dev_err(&dev->dev, | |
985 | "failed waiting for Axe-Fx III to boot: %d\n", err); | |
986 | return err; | |
987 | } | |
988 | ||
989 | dev_dbg(&dev->dev, "Axe-Fx III is now ready\n"); | |
990 | ||
991 | err = usb_set_interface(dev, 1, 0); | |
992 | if (err < 0) | |
993 | dev_dbg(&dev->dev, | |
994 | "error stopping Axe-Fx III interface: %d\n", err); | |
995 | ||
996 | return 0; | |
997 | } | |
998 | ||
a634090a MR |
999 | |
1000 | #define MICROBOOK_BUF_SIZE 128 | |
1001 | ||
1002 | static int snd_usb_motu_microbookii_communicate(struct usb_device *dev, u8 *buf, | |
1003 | int buf_size, int *length) | |
1004 | { | |
1005 | int err, actual_length; | |
1006 | ||
801ebf10 TI |
1007 | if (snd_usb_pipe_sanity_check(dev, usb_sndintpipe(dev, 0x01))) |
1008 | return -EINVAL; | |
a634090a MR |
1009 | err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x01), buf, *length, |
1010 | &actual_length, 1000); | |
1011 | if (err < 0) | |
1012 | return err; | |
1013 | ||
1014 | print_hex_dump(KERN_DEBUG, "MicroBookII snd: ", DUMP_PREFIX_NONE, 16, 1, | |
1015 | buf, actual_length, false); | |
1016 | ||
1017 | memset(buf, 0, buf_size); | |
1018 | ||
801ebf10 TI |
1019 | if (snd_usb_pipe_sanity_check(dev, usb_rcvintpipe(dev, 0x82))) |
1020 | return -EINVAL; | |
a634090a MR |
1021 | err = usb_interrupt_msg(dev, usb_rcvintpipe(dev, 0x82), buf, buf_size, |
1022 | &actual_length, 1000); | |
1023 | if (err < 0) | |
1024 | return err; | |
1025 | ||
1026 | print_hex_dump(KERN_DEBUG, "MicroBookII rcv: ", DUMP_PREFIX_NONE, 16, 1, | |
1027 | buf, actual_length, false); | |
1028 | ||
1029 | *length = actual_length; | |
1030 | return 0; | |
1031 | } | |
1032 | ||
1033 | static int snd_usb_motu_microbookii_boot_quirk(struct usb_device *dev) | |
1034 | { | |
1035 | int err, actual_length, poll_attempts = 0; | |
1036 | static const u8 set_samplerate_seq[] = { 0x00, 0x00, 0x00, 0x00, | |
1037 | 0x00, 0x00, 0x0b, 0x14, | |
1038 | 0x00, 0x00, 0x00, 0x01 }; | |
1039 | static const u8 poll_ready_seq[] = { 0x00, 0x04, 0x00, 0x00, | |
1040 | 0x00, 0x00, 0x0b, 0x18 }; | |
1041 | u8 *buf = kzalloc(MICROBOOK_BUF_SIZE, GFP_KERNEL); | |
1042 | ||
1043 | if (!buf) | |
1044 | return -ENOMEM; | |
1045 | ||
1046 | dev_info(&dev->dev, "Waiting for MOTU Microbook II to boot up...\n"); | |
1047 | ||
1048 | /* First we tell the device which sample rate to use. */ | |
1049 | memcpy(buf, set_samplerate_seq, sizeof(set_samplerate_seq)); | |
1050 | actual_length = sizeof(set_samplerate_seq); | |
1051 | err = snd_usb_motu_microbookii_communicate(dev, buf, MICROBOOK_BUF_SIZE, | |
1052 | &actual_length); | |
1053 | ||
1054 | if (err < 0) { | |
1055 | dev_err(&dev->dev, | |
1056 | "failed setting the sample rate for Motu MicroBook II: %d\n", | |
1057 | err); | |
1058 | goto free_buf; | |
1059 | } | |
1060 | ||
1061 | /* Then we poll every 100 ms until the device informs of its readiness. */ | |
1062 | while (true) { | |
1063 | if (++poll_attempts > 100) { | |
1064 | dev_err(&dev->dev, | |
1065 | "failed booting Motu MicroBook II: timeout\n"); | |
1066 | err = -ENODEV; | |
1067 | goto free_buf; | |
1068 | } | |
1069 | ||
1070 | memset(buf, 0, MICROBOOK_BUF_SIZE); | |
1071 | memcpy(buf, poll_ready_seq, sizeof(poll_ready_seq)); | |
1072 | ||
1073 | actual_length = sizeof(poll_ready_seq); | |
1074 | err = snd_usb_motu_microbookii_communicate( | |
1075 | dev, buf, MICROBOOK_BUF_SIZE, &actual_length); | |
1076 | if (err < 0) { | |
1077 | dev_err(&dev->dev, | |
1078 | "failed booting Motu MicroBook II: communication error %d\n", | |
1079 | err); | |
1080 | goto free_buf; | |
1081 | } | |
1082 | ||
1083 | /* the device signals its readiness through a message of the | |
1084 | * form | |
1085 | * XX 06 00 00 00 00 0b 18 00 00 00 01 | |
1086 | * If the device is not yet ready to accept audio data, the | |
1087 | * last byte of that sequence is 00. | |
1088 | */ | |
1089 | if (actual_length == 12 && buf[actual_length - 1] == 1) | |
1090 | break; | |
1091 | ||
1092 | msleep(100); | |
1093 | } | |
1094 | ||
1095 | dev_info(&dev->dev, "MOTU MicroBook II ready\n"); | |
1096 | ||
1097 | free_buf: | |
1098 | kfree(buf); | |
1099 | return err; | |
1100 | } | |
1101 | ||
e5779998 DM |
1102 | /* |
1103 | * Setup quirks | |
1104 | */ | |
0f5733b0 GP |
1105 | #define MAUDIO_SET 0x01 /* parse device_setup */ |
1106 | #define MAUDIO_SET_COMPATIBLE 0x80 /* use only "win-compatible" interfaces */ | |
1107 | #define MAUDIO_SET_DTS 0x02 /* enable DTS Digital Output */ | |
1108 | #define MAUDIO_SET_96K 0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */ | |
1109 | #define MAUDIO_SET_24B 0x08 /* 24bits sample if set, 16bits otherwise */ | |
1110 | #define MAUDIO_SET_DI 0x10 /* enable Digital Input */ | |
1111 | #define MAUDIO_SET_MASK 0x1f /* bit mask for setup value */ | |
1112 | #define MAUDIO_SET_24B_48K_DI 0x19 /* 24bits+48KHz+Digital Input */ | |
1113 | #define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48KHz+No Digital Input */ | |
1114 | #define MAUDIO_SET_16B_48K_DI 0x11 /* 16bits+48KHz+Digital Input */ | |
1115 | #define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48KHz+No Digital Input */ | |
1116 | ||
1117 | static int quattro_skip_setting_quirk(struct snd_usb_audio *chip, | |
1118 | int iface, int altno) | |
1119 | { | |
1120 | /* Reset ALL ifaces to 0 altsetting. | |
1121 | * Call it for every possible altsetting of every interface. | |
1122 | */ | |
1123 | usb_set_interface(chip->dev, iface, 0); | |
1124 | if (chip->setup & MAUDIO_SET) { | |
1125 | if (chip->setup & MAUDIO_SET_COMPATIBLE) { | |
1126 | if (iface != 1 && iface != 2) | |
1127 | return 1; /* skip all interfaces but 1 and 2 */ | |
1128 | } else { | |
1129 | unsigned int mask; | |
1130 | if (iface == 1 || iface == 2) | |
1131 | return 1; /* skip interfaces 1 and 2 */ | |
1132 | if ((chip->setup & MAUDIO_SET_96K) && altno != 1) | |
1133 | return 1; /* skip this altsetting */ | |
1134 | mask = chip->setup & MAUDIO_SET_MASK; | |
1135 | if (mask == MAUDIO_SET_24B_48K_DI && altno != 2) | |
1136 | return 1; /* skip this altsetting */ | |
1137 | if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3) | |
1138 | return 1; /* skip this altsetting */ | |
1139 | if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 4) | |
1140 | return 1; /* skip this altsetting */ | |
1141 | } | |
1142 | } | |
0ba41d91 | 1143 | usb_audio_dbg(chip, |
0f5733b0 GP |
1144 | "using altsetting %d for interface %d config %d\n", |
1145 | altno, iface, chip->setup); | |
1146 | return 0; /* keep this altsetting */ | |
1147 | } | |
e5779998 DM |
1148 | |
1149 | static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip, | |
1150 | int iface, | |
1151 | int altno) | |
1152 | { | |
1153 | /* Reset ALL ifaces to 0 altsetting. | |
1154 | * Call it for every possible altsetting of every interface. | |
1155 | */ | |
1156 | usb_set_interface(chip->dev, iface, 0); | |
1157 | ||
0f5733b0 GP |
1158 | if (chip->setup & MAUDIO_SET) { |
1159 | unsigned int mask; | |
1160 | if ((chip->setup & MAUDIO_SET_DTS) && altno != 6) | |
e5779998 | 1161 | return 1; /* skip this altsetting */ |
0f5733b0 | 1162 | if ((chip->setup & MAUDIO_SET_96K) && altno != 1) |
e5779998 | 1163 | return 1; /* skip this altsetting */ |
0f5733b0 GP |
1164 | mask = chip->setup & MAUDIO_SET_MASK; |
1165 | if (mask == MAUDIO_SET_24B_48K_DI && altno != 2) | |
e5779998 | 1166 | return 1; /* skip this altsetting */ |
0f5733b0 | 1167 | if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3) |
e5779998 | 1168 | return 1; /* skip this altsetting */ |
0f5733b0 | 1169 | if (mask == MAUDIO_SET_16B_48K_DI && altno != 4) |
e5779998 | 1170 | return 1; /* skip this altsetting */ |
0f5733b0 | 1171 | if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 5) |
e5779998 DM |
1172 | return 1; /* skip this altsetting */ |
1173 | } | |
1174 | ||
1175 | return 0; /* keep this altsetting */ | |
1176 | } | |
1177 | ||
0f5733b0 GP |
1178 | static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip, |
1179 | int iface, int altno) | |
1180 | { | |
1181 | /* Reset ALL ifaces to 0 altsetting. | |
1182 | * Call it for every possible altsetting of every interface. | |
1183 | */ | |
1184 | usb_set_interface(chip->dev, iface, 0); | |
1185 | ||
1186 | /* possible configuration where both inputs and only one output is | |
1187 | *used is not supported by the current setup | |
1188 | */ | |
1189 | if (chip->setup & (MAUDIO_SET | MAUDIO_SET_24B)) { | |
1190 | if (chip->setup & MAUDIO_SET_96K) { | |
1191 | if (altno != 3 && altno != 6) | |
1192 | return 1; | |
1193 | } else if (chip->setup & MAUDIO_SET_DI) { | |
1194 | if (iface == 4) | |
1195 | return 1; /* no analog input */ | |
1196 | if (altno != 2 && altno != 5) | |
1197 | return 1; /* enable only altsets 2 and 5 */ | |
1198 | } else { | |
1199 | if (iface == 5) | |
1200 | return 1; /* disable digialt input */ | |
1201 | if (altno != 2 && altno != 5) | |
1202 | return 1; /* enalbe only altsets 2 and 5 */ | |
1203 | } | |
1204 | } else { | |
1205 | /* keep only 16-Bit mode */ | |
1206 | if (altno != 1) | |
1207 | return 1; | |
1208 | } | |
1209 | ||
0ba41d91 | 1210 | usb_audio_dbg(chip, |
0f5733b0 GP |
1211 | "using altsetting %d for interface %d config %d\n", |
1212 | altno, iface, chip->setup); | |
1213 | return 0; /* keep this altsetting */ | |
1214 | } | |
1215 | ||
e5779998 DM |
1216 | int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip, |
1217 | int iface, | |
1218 | int altno) | |
1219 | { | |
1220 | /* audiophile usb: skip altsets incompatible with device_setup */ | |
1221 | if (chip->usb_id == USB_ID(0x0763, 0x2003)) | |
1222 | return audiophile_skip_setting_quirk(chip, iface, altno); | |
0f5733b0 GP |
1223 | /* quattro usb: skip altsets incompatible with device_setup */ |
1224 | if (chip->usb_id == USB_ID(0x0763, 0x2001)) | |
1225 | return quattro_skip_setting_quirk(chip, iface, altno); | |
1226 | /* fasttrackpro usb: skip altsets incompatible with device_setup */ | |
1227 | if (chip->usb_id == USB_ID(0x0763, 0x2012)) | |
1228 | return fasttrackpro_skip_setting_quirk(chip, iface, altno); | |
e5779998 DM |
1229 | |
1230 | return 0; | |
1231 | } | |
1232 | ||
1233 | int snd_usb_apply_boot_quirk(struct usb_device *dev, | |
1234 | struct usb_interface *intf, | |
79289e24 TI |
1235 | const struct snd_usb_audio_quirk *quirk, |
1236 | unsigned int id) | |
e5779998 | 1237 | { |
3347b26c DM |
1238 | switch (id) { |
1239 | case USB_ID(0x041e, 0x3000): | |
1240 | /* SB Extigy needs special boot-up sequence */ | |
1241 | /* if more models come, this will go to the quirk list. */ | |
e5779998 DM |
1242 | return snd_usb_extigy_boot_quirk(dev, intf); |
1243 | ||
3347b26c DM |
1244 | case USB_ID(0x041e, 0x3020): |
1245 | /* SB Audigy 2 NX needs its own boot-up magic, too */ | |
e5779998 DM |
1246 | return snd_usb_audigy2nx_boot_quirk(dev); |
1247 | ||
3347b26c DM |
1248 | case USB_ID(0x10f5, 0x0200): |
1249 | /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */ | |
e5779998 DM |
1250 | return snd_usb_cm106_boot_quirk(dev); |
1251 | ||
3347b26c DM |
1252 | case USB_ID(0x0d8c, 0x0102): |
1253 | /* C-Media CM6206 / CM106-Like Sound Device */ | |
8129e79e | 1254 | case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */ |
e5779998 DM |
1255 | return snd_usb_cm6206_boot_quirk(dev); |
1256 | ||
cb99864d DZ |
1257 | case USB_ID(0x0dba, 0x3000): |
1258 | /* Digidesign Mbox 2 */ | |
1259 | return snd_usb_mbox2_boot_quirk(dev); | |
1260 | ||
11e424e8 EG |
1261 | case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */ |
1262 | case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */ | |
1263 | return snd_usb_novation_boot_quirk(dev); | |
5e212332 | 1264 | |
3347b26c DM |
1265 | case USB_ID(0x133e, 0x0815): |
1266 | /* Access Music VirusTI Desktop */ | |
e5779998 DM |
1267 | return snd_usb_accessmusic_boot_quirk(dev); |
1268 | ||
759e890f | 1269 | case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */ |
3347b26c DM |
1270 | case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */ |
1271 | case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */ | |
54a8c500 | 1272 | return snd_usb_nativeinstruments_boot_quirk(dev); |
0f5733b0 GP |
1273 | case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */ |
1274 | return snd_usb_fasttrackpro_boot_quirk(dev); | |
19570d74 TI |
1275 | case USB_ID(0x047f, 0xc010): /* Plantronics Gamecom 780 */ |
1276 | return snd_usb_gamecon780_boot_quirk(dev); | |
16bafa79 AA |
1277 | case USB_ID(0x2466, 0x8010): /* Fractal Audio Axe-Fx 3 */ |
1278 | return snd_usb_axefx3_boot_quirk(dev); | |
a634090a MR |
1279 | case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */ |
1280 | return snd_usb_motu_microbookii_boot_quirk(dev); | |
3347b26c | 1281 | } |
54a8c500 | 1282 | |
e5779998 DM |
1283 | return 0; |
1284 | } | |
1285 | ||
1286 | /* | |
1287 | * check if the device uses big-endian samples | |
1288 | */ | |
1289 | int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp) | |
1290 | { | |
48fc7f7e | 1291 | /* it depends on altsetting whether the device is big-endian or not */ |
e5779998 DM |
1292 | switch (chip->usb_id) { |
1293 | case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */ | |
0f5733b0 GP |
1294 | if (fp->altsetting == 2 || fp->altsetting == 3 || |
1295 | fp->altsetting == 5 || fp->altsetting == 6) | |
e5779998 DM |
1296 | return 1; |
1297 | break; | |
1298 | case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ | |
1299 | if (chip->setup == 0x00 || | |
0f5733b0 GP |
1300 | fp->altsetting == 1 || fp->altsetting == 2 || |
1301 | fp->altsetting == 3) | |
1302 | return 1; | |
1303 | break; | |
1304 | case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro */ | |
1305 | if (fp->altsetting == 2 || fp->altsetting == 3 || | |
1306 | fp->altsetting == 5 || fp->altsetting == 6) | |
e5779998 | 1307 | return 1; |
0f5733b0 | 1308 | break; |
e5779998 DM |
1309 | } |
1310 | return 0; | |
1311 | } | |
1312 | ||
1313 | /* | |
1cdfa9f3 | 1314 | * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device, |
e5779998 DM |
1315 | * not for interface. |
1316 | */ | |
1317 | ||
1318 | enum { | |
1319 | EMU_QUIRK_SR_44100HZ = 0, | |
1320 | EMU_QUIRK_SR_48000HZ, | |
1321 | EMU_QUIRK_SR_88200HZ, | |
1322 | EMU_QUIRK_SR_96000HZ, | |
1323 | EMU_QUIRK_SR_176400HZ, | |
1324 | EMU_QUIRK_SR_192000HZ | |
1325 | }; | |
1326 | ||
1327 | static void set_format_emu_quirk(struct snd_usb_substream *subs, | |
1328 | struct audioformat *fmt) | |
1329 | { | |
1330 | unsigned char emu_samplerate_id = 0; | |
1331 | ||
1332 | /* When capture is active | |
1333 | * sample rate shouldn't be changed | |
1334 | * by playback substream | |
1335 | */ | |
1336 | if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) { | |
1337 | if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1) | |
1338 | return; | |
1339 | } | |
1340 | ||
1341 | switch (fmt->rate_min) { | |
1342 | case 48000: | |
1343 | emu_samplerate_id = EMU_QUIRK_SR_48000HZ; | |
1344 | break; | |
1345 | case 88200: | |
1346 | emu_samplerate_id = EMU_QUIRK_SR_88200HZ; | |
1347 | break; | |
1348 | case 96000: | |
1349 | emu_samplerate_id = EMU_QUIRK_SR_96000HZ; | |
1350 | break; | |
1351 | case 176400: | |
1352 | emu_samplerate_id = EMU_QUIRK_SR_176400HZ; | |
1353 | break; | |
1354 | case 192000: | |
1355 | emu_samplerate_id = EMU_QUIRK_SR_192000HZ; | |
1356 | break; | |
1357 | default: | |
1358 | emu_samplerate_id = EMU_QUIRK_SR_44100HZ; | |
1359 | break; | |
1360 | } | |
1361 | snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id); | |
1539d4f8 | 1362 | subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0; |
e5779998 DM |
1363 | } |
1364 | ||
1365 | void snd_usb_set_format_quirk(struct snd_usb_substream *subs, | |
1366 | struct audioformat *fmt) | |
1367 | { | |
1368 | switch (subs->stream->chip->usb_id) { | |
1369 | case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */ | |
1370 | case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */ | |
1371 | case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */ | |
1cdfa9f3 | 1372 | case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */ |
e5779998 DM |
1373 | set_format_emu_quirk(subs, fmt); |
1374 | break; | |
1375 | } | |
1376 | } | |
1377 | ||
b62b9980 JT |
1378 | bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip) |
1379 | { | |
9fc88ad6 EW |
1380 | /* devices which do not support reading the sample rate. */ |
1381 | switch (chip->usb_id) { | |
7627e40c | 1382 | case USB_ID(0x041E, 0x4080): /* Creative Live Cam VF0610 */ |
9fc88ad6 | 1383 | case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */ |
84add303 | 1384 | case USB_ID(0x0556, 0x0014): /* Phoenix Audio TMX320VC */ |
41f5e3bd | 1385 | case USB_ID(0x05A3, 0x9420): /* ELP HD USB Camera */ |
2f80b295 | 1386 | case USB_ID(0x074D, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */ |
a8e800fe | 1387 | case USB_ID(0x1395, 0x740a): /* Sennheiser DECT */ |
83d9956b | 1388 | case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */ |
12a6116e | 1389 | case USB_ID(0x21B4, 0x0081): /* AudioQuest DragonFly */ |
9fc88ad6 EW |
1390 | return true; |
1391 | } | |
a6aa6cdc TI |
1392 | |
1393 | /* devices of these vendors don't support reading rate, either */ | |
1394 | switch (USB_ID_VENDOR(chip->usb_id)) { | |
1395 | case 0x045E: /* MS Lifecam */ | |
1396 | case 0x047F: /* Plantronics */ | |
1397 | case 0x1de7: /* Phoenix Audio */ | |
1398 | return true; | |
1399 | } | |
1400 | ||
9fc88ad6 | 1401 | return false; |
b62b9980 | 1402 | } |
6874daad | 1403 | |
71426535 | 1404 | /* ITF-USB DSD based DACs need a vendor cmd to switch |
6874daad JK |
1405 | * between PCM and native DSD mode |
1406 | */ | |
f3b906d7 | 1407 | static bool is_itf_usb_dsd_dac(unsigned int id) |
8b28c93f | 1408 | { |
f3b906d7 | 1409 | switch (id) { |
8b28c93f TI |
1410 | case USB_ID(0x154e, 0x1003): /* Denon DA-300USB */ |
1411 | case USB_ID(0x154e, 0x3005): /* Marantz HD-DAC1 */ | |
1412 | case USB_ID(0x154e, 0x3006): /* Marantz SA-14S1 */ | |
71426535 | 1413 | case USB_ID(0x1852, 0x5065): /* Luxman DA-06 */ |
f3b906d7 | 1414 | case USB_ID(0x0644, 0x8043): /* TEAC UD-501/UD-501V2/UD-503/NT-503 */ |
866f7ed7 | 1415 | case USB_ID(0x0644, 0x8044): /* Esoteric D-05X */ |
b0021486 | 1416 | case USB_ID(0x0644, 0x804a): /* TEAC UD-301 */ |
7f38ca04 NO |
1417 | return true; |
1418 | } | |
1419 | return false; | |
1420 | } | |
1421 | ||
6874daad JK |
1422 | int snd_usb_select_mode_quirk(struct snd_usb_substream *subs, |
1423 | struct audioformat *fmt) | |
1424 | { | |
1425 | struct usb_device *dev = subs->dev; | |
1426 | int err; | |
1427 | ||
f3b906d7 | 1428 | if (is_itf_usb_dsd_dac(subs->stream->chip->usb_id)) { |
6874daad JK |
1429 | /* First switch to alt set 0, otherwise the mode switch cmd |
1430 | * will not be accepted by the DAC | |
1431 | */ | |
1432 | err = usb_set_interface(dev, fmt->iface, 0); | |
1433 | if (err < 0) | |
1434 | return err; | |
1435 | ||
df3f0347 | 1436 | msleep(20); /* Delay needed after setting the interface */ |
6874daad | 1437 | |
7f38ca04 | 1438 | /* Vendor mode switch cmd is required. */ |
f3b906d7 NO |
1439 | if (fmt->formats & SNDRV_PCM_FMTBIT_DSD_U32_BE) { |
1440 | /* DSD mode (DSD_U32) requested */ | |
7f38ca04 NO |
1441 | err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0, |
1442 | USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, | |
1443 | 1, 1, NULL, 0); | |
1444 | if (err < 0) | |
1445 | return err; | |
7f38ca04 | 1446 | |
f3b906d7 NO |
1447 | } else { |
1448 | /* PCM or DOP mode (S32) requested */ | |
1449 | /* PCM mode (S16) requested */ | |
7f38ca04 NO |
1450 | err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0, |
1451 | USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, | |
1452 | 0, 1, NULL, 0); | |
1453 | if (err < 0) | |
1454 | return err; | |
f3b906d7 | 1455 | |
7f38ca04 | 1456 | } |
df3f0347 | 1457 | msleep(20); |
6874daad JK |
1458 | } |
1459 | return 0; | |
1460 | } | |
1461 | ||
2b58fd5b DM |
1462 | void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep) |
1463 | { | |
1464 | /* | |
1465 | * "Playback Design" products send bogus feedback data at the start | |
1466 | * of the stream. Ignore them. | |
1467 | */ | |
79289e24 | 1468 | if (USB_ID_VENDOR(ep->chip->usb_id) == 0x23ba && |
2b58fd5b DM |
1469 | ep->type == SND_USB_ENDPOINT_TYPE_SYNC) |
1470 | ep->skip_packets = 4; | |
83e3acd4 EZ |
1471 | |
1472 | /* | |
e9a25e04 MG |
1473 | * M-Audio Fast Track C400/C600 - when packets are not skipped, real |
1474 | * world latency varies by approx. +/- 50 frames (at 96KHz) each time | |
1475 | * the stream is (re)started. When skipping packets 16 at endpoint | |
1476 | * start up, the real world latency is stable within +/- 1 frame (also | |
83e3acd4 EZ |
1477 | * across power cycles). |
1478 | */ | |
e9a25e04 MG |
1479 | if ((ep->chip->usb_id == USB_ID(0x0763, 0x2030) || |
1480 | ep->chip->usb_id == USB_ID(0x0763, 0x2031)) && | |
83e3acd4 EZ |
1481 | ep->type == SND_USB_ENDPOINT_TYPE_DATA) |
1482 | ep->skip_packets = 16; | |
9abc1341 DM |
1483 | |
1484 | /* Work around devices that report unreasonable feedback data */ | |
ca0dd273 DM |
1485 | if ((ep->chip->usb_id == USB_ID(0x0644, 0x8038) || /* TEAC UD-H01 */ |
1486 | ep->chip->usb_id == USB_ID(0x1852, 0x5034)) && /* T+A Dac8 */ | |
9abc1341 | 1487 | ep->syncmaxsize == 4) |
ca0dd273 | 1488 | ep->tenor_fb_quirk = 1; |
2b58fd5b DM |
1489 | } |
1490 | ||
21bb5aaf DM |
1491 | void snd_usb_set_interface_quirk(struct usb_device *dev) |
1492 | { | |
79289e24 TI |
1493 | struct snd_usb_audio *chip = dev_get_drvdata(&dev->dev); |
1494 | ||
1495 | if (!chip) | |
1496 | return; | |
21bb5aaf DM |
1497 | /* |
1498 | * "Playback Design" products need a 50ms delay after setting the | |
1499 | * USB interface. | |
1500 | */ | |
79289e24 | 1501 | switch (USB_ID_VENDOR(chip->usb_id)) { |
5a4ff9ec GF |
1502 | case 0x23ba: /* Playback Design */ |
1503 | case 0x0644: /* TEAC Corp. */ | |
df3f0347 | 1504 | msleep(50); |
5a4ff9ec GF |
1505 | break; |
1506 | } | |
21bb5aaf DM |
1507 | } |
1508 | ||
79289e24 | 1509 | /* quirk applied after snd_usb_ctl_msg(); not applied during boot quirks */ |
2b58fd5b DM |
1510 | void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe, |
1511 | __u8 request, __u8 requesttype, __u16 value, | |
1512 | __u16 index, void *data, __u16 size) | |
1513 | { | |
79289e24 TI |
1514 | struct snd_usb_audio *chip = dev_get_drvdata(&dev->dev); |
1515 | ||
1516 | if (!chip) | |
1517 | return; | |
2b58fd5b DM |
1518 | /* |
1519 | * "Playback Design" products need a 20ms delay after each | |
1520 | * class compliant request | |
1521 | */ | |
79289e24 | 1522 | if (USB_ID_VENDOR(chip->usb_id) == 0x23ba && |
2b58fd5b | 1523 | (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) |
df3f0347 | 1524 | msleep(20); |
6e84a8d7 | 1525 | |
5a4ff9ec GF |
1526 | /* |
1527 | * "TEAC Corp." products need a 20ms delay after each | |
1528 | * class compliant request | |
1529 | */ | |
79289e24 | 1530 | if (USB_ID_VENDOR(chip->usb_id) == 0x0644 && |
5a4ff9ec | 1531 | (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) |
df3f0347 | 1532 | msleep(20); |
5a4ff9ec | 1533 | |
71426535 | 1534 | /* ITF-USB DSD based DACs functionality need a delay |
6e84a8d7 JK |
1535 | * after each class compliant request |
1536 | */ | |
f3b906d7 | 1537 | if (is_itf_usb_dsd_dac(chip->usb_id) |
8b28c93f | 1538 | && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) |
df3f0347 | 1539 | msleep(20); |
dacacb0a | 1540 | |
07b3b5e9 JT |
1541 | /* Zoom R16/24, Logitech H650e, Jabra 550a needs a tiny delay here, |
1542 | * otherwise requests like get/set frequency return as failed despite | |
1543 | * actually succeeding. | |
dacacb0a | 1544 | */ |
07b3b5e9 JT |
1545 | if ((chip->usb_id == USB_ID(0x1686, 0x00dd) || |
1546 | chip->usb_id == USB_ID(0x046d, 0x0a46) || | |
1547 | chip->usb_id == USB_ID(0x0b0e, 0x0349)) && | |
dacacb0a | 1548 | (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) |
df3f0347 | 1549 | usleep_range(1000, 2000); |
2b58fd5b DM |
1550 | } |
1551 | ||
126825e7 DM |
1552 | /* |
1553 | * snd_usb_interface_dsd_format_quirks() is called from format.c to | |
1554 | * augment the PCM format bit-field for DSD types. The UAC standards | |
1555 | * don't have a designated bit field to denote DSD-capable interfaces, | |
1556 | * hence all hardware that is known to support this format has to be | |
1557 | * listed here. | |
1558 | */ | |
1559 | u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip, | |
1560 | struct audioformat *fp, | |
1561 | unsigned int sample_bytes) | |
1562 | { | |
f3b906d7 NO |
1563 | struct usb_interface *iface; |
1564 | ||
126825e7 | 1565 | /* Playback Designs */ |
79289e24 | 1566 | if (USB_ID_VENDOR(chip->usb_id) == 0x23ba) { |
126825e7 DM |
1567 | switch (fp->altsetting) { |
1568 | case 1: | |
1569 | fp->dsd_dop = true; | |
1570 | return SNDRV_PCM_FMTBIT_DSD_U16_LE; | |
1571 | case 2: | |
1572 | fp->dsd_bitrev = true; | |
1573 | return SNDRV_PCM_FMTBIT_DSD_U8; | |
1574 | case 3: | |
1575 | fp->dsd_bitrev = true; | |
1576 | return SNDRV_PCM_FMTBIT_DSD_U16_LE; | |
1577 | } | |
1578 | } | |
1579 | ||
848f3a82 JK |
1580 | /* XMOS based USB DACs */ |
1581 | switch (chip->usb_id) { | |
f656891c | 1582 | case USB_ID(0x1511, 0x0037): /* AURALiC VEGA */ |
5327d6ba | 1583 | case USB_ID(0x22d9, 0x0416): /* OPPO HA-1 */ |
f656891c DM |
1584 | case USB_ID(0x22d9, 0x0436): /* OPPO Sonica */ |
1585 | case USB_ID(0x22d9, 0x0461): /* OPPO UDP-205 */ | |
1586 | case USB_ID(0x2522, 0x0012): /* LH Labs VI DAC Infinity */ | |
9bb201a5 | 1587 | case USB_ID(0x2772, 0x0230): /* Pro-Ject Pre Box S2 Digital */ |
848f3a82 | 1588 | if (fp->altsetting == 2) |
d42472ec | 1589 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; |
848f3a82 | 1590 | break; |
3b7e5c7e | 1591 | |
f656891c | 1592 | case USB_ID(0x0d8c, 0x0316): /* Hegel HD12 DSD */ |
202e69e6 | 1593 | case USB_ID(0x10cb, 0x0103): /* The Bit Opus #3; with fp->dsd_raw */ |
f656891c | 1594 | case USB_ID(0x16b0, 0x06b2): /* NuPrime DAC-10 */ |
202e69e6 | 1595 | case USB_ID(0x16d0, 0x09dd): /* Encore mDSD */ |
f656891c DM |
1596 | case USB_ID(0x16d0, 0x0733): /* Furutech ADL Stratos */ |
1597 | case USB_ID(0x16d0, 0x09db): /* NuPrime Audio DAC-9 */ | |
1598 | case USB_ID(0x1db5, 0x0003): /* Bryston BDA3 */ | |
f656891c DM |
1599 | case USB_ID(0x22d9, 0x0426): /* OPPO HA-2 */ |
1600 | case USB_ID(0x22e1, 0xca01): /* HDTA Serenade DSD */ | |
1601 | case USB_ID(0x249c, 0x9326): /* M2Tech Young MkIII */ | |
ad678b4c | 1602 | case USB_ID(0x2616, 0x0106): /* PS Audio NuWave DAC */ |
f656891c DM |
1603 | case USB_ID(0x2622, 0x0041): /* Audiolab M-DAC+ */ |
1604 | case USB_ID(0x27f7, 0x3002): /* W4S DAC-2v2SE */ | |
1605 | case USB_ID(0x29a2, 0x0086): /* Mutec MC3+ USB */ | |
1606 | case USB_ID(0x6b42, 0x0042): /* MSB Technology */ | |
848f3a82 | 1607 | if (fp->altsetting == 3) |
d42472ec | 1608 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; |
848f3a82 | 1609 | break; |
3eff682d | 1610 | |
7c74866b DM |
1611 | /* Amanero Combo384 USB based DACs with native DSD support */ |
1612 | case USB_ID(0x16d0, 0x071a): /* Amanero - Combo384 */ | |
1613 | case USB_ID(0x2ab6, 0x0004): /* T+A DAC8DSD-V2.0, MP1000E-V2.0, MP2000R-V2.0, MP2500R-V2.0, MP3100HV-V2.0 */ | |
1614 | case USB_ID(0x2ab6, 0x0005): /* T+A USB HD Audio 1 */ | |
1615 | case USB_ID(0x2ab6, 0x0006): /* T+A USB HD Audio 2 */ | |
3eff682d | 1616 | if (fp->altsetting == 2) { |
f83914fd | 1617 | switch (le16_to_cpu(chip->dev->descriptor.bcdDevice)) { |
3eff682d JL |
1618 | case 0x199: |
1619 | return SNDRV_PCM_FMTBIT_DSD_U32_LE; | |
1620 | case 0x19b: | |
f5ce8179 | 1621 | case 0x203: |
3eff682d JL |
1622 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; |
1623 | default: | |
1624 | break; | |
1625 | } | |
1626 | } | |
1627 | break; | |
ed993c6f JL |
1628 | case USB_ID(0x16d0, 0x0a23): |
1629 | if (fp->altsetting == 2) | |
1630 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; | |
1631 | break; | |
3eff682d | 1632 | |
848f3a82 JK |
1633 | default: |
1634 | break; | |
1635 | } | |
1636 | ||
f3b906d7 NO |
1637 | /* ITF-USB DSD based DACs */ |
1638 | if (is_itf_usb_dsd_dac(chip->usb_id)) { | |
1639 | iface = usb_ifnum_to_if(chip->dev, fp->iface); | |
7a2e9ddc | 1640 | |
f3b906d7 NO |
1641 | /* Altsetting 2 support native DSD if the num of altsets is |
1642 | * three (0-2), | |
1643 | * Altsetting 3 support native DSD if the num of altsets is | |
1644 | * four (0-3). | |
1645 | */ | |
1646 | if (fp->altsetting == iface->num_altsetting - 1) | |
7f38ca04 NO |
1647 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; |
1648 | } | |
1649 | ||
3a572d94 JL |
1650 | /* Mostly generic method to detect many DSD-capable implementations - |
1651 | * from XMOS/Thesycon | |
1652 | */ | |
1653 | switch (USB_ID_VENDOR(chip->usb_id)) { | |
f332485f | 1654 | case 0x20b1: /* XMOS based devices */ |
1ea0358e | 1655 | case 0x152a: /* Thesycon devices */ |
3a572d94 | 1656 | case 0x25ce: /* Mytek devices */ |
3bff2407 | 1657 | case 0x2ab6: /* T+A devices */ |
3a572d94 JL |
1658 | if (fp->dsd_raw) |
1659 | return SNDRV_PCM_FMTBIT_DSD_U32_BE; | |
1660 | break; | |
1661 | default: | |
1662 | break; | |
1663 | ||
1664 | } | |
1665 | ||
126825e7 DM |
1666 | return 0; |
1667 | } | |
ceb18f51 RB |
1668 | |
1669 | void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip, | |
1670 | struct audioformat *fp, | |
1671 | int stream) | |
1672 | { | |
1673 | switch (chip->usb_id) { | |
1674 | case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */ | |
1675 | /* Optoplay sets the sample rate attribute although | |
1676 | * it seems not supporting it in fact. | |
1677 | */ | |
1678 | fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE; | |
1679 | break; | |
1680 | case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */ | |
1681 | case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ | |
1682 | /* doesn't set the sample rate attribute, but supports it */ | |
1683 | fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE; | |
1684 | break; | |
1685 | case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */ | |
1686 | case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */ | |
1687 | case USB_ID(0x047f, 0x0ca1): /* plantronics headset */ | |
1688 | case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is | |
1689 | an older model 77d:223) */ | |
1690 | /* | |
1691 | * plantronics headset and Griffin iMic have set adaptive-in | |
1692 | * although it's really not... | |
1693 | */ | |
1694 | fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE; | |
1695 | if (stream == SNDRV_PCM_STREAM_PLAYBACK) | |
1696 | fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE; | |
1697 | else | |
1698 | fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC; | |
1699 | break; | |
1700 | } | |
1701 | } |