Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * ALSA driver for ICEnsemble VT1724 (Envy24HT) | |
3 | * | |
4 | * Lowlevel functions for ESI Juli@ cards | |
5 | * | |
c1017a4c | 6 | * Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz> |
d16be8ed PH |
7 | * 2008 Pavel Hofman <dustin@seznam.cz> |
8 | * | |
1da177e4 LT |
9 | * |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2 of the License, or | |
13 | * (at your option) any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
23 | * | |
cc67b7f7 | 24 | */ |
1da177e4 | 25 | |
1da177e4 LT |
26 | #include <linux/delay.h> |
27 | #include <linux/interrupt.h> | |
28 | #include <linux/init.h> | |
29 | #include <linux/slab.h> | |
30 | #include <sound/core.h> | |
d16be8ed | 31 | #include <sound/tlv.h> |
1da177e4 LT |
32 | |
33 | #include "ice1712.h" | |
34 | #include "envy24ht.h" | |
35 | #include "juli.h" | |
cc67b7f7 | 36 | |
7cda8ba9 TI |
37 | struct juli_spec { |
38 | struct ak4114 *ak4114; | |
cc67b7f7 | 39 | unsigned int analog:1; |
7cda8ba9 TI |
40 | }; |
41 | ||
1da177e4 LT |
42 | /* |
43 | * chip addresses on I2C bus | |
44 | */ | |
45 | #define AK4114_ADDR 0x20 /* S/PDIF receiver */ | |
46 | #define AK4358_ADDR 0x22 /* DAC */ | |
47 | ||
d16be8ed PH |
48 | /* |
49 | * Juli does not use the standard ICE1724 clock scheme. Juli's ice1724 chip is | |
50 | * supplied by external clock provided by Xilinx array and MK73-1 PLL frequency | |
51 | * multiplier. Actual frequency is set by ice1724 GPIOs hooked to the Xilinx. | |
52 | * | |
53 | * The clock circuitry is supplied by the two ice1724 crystals. This | |
54 | * arrangement allows to generate independent clock signal for AK4114's input | |
55 | * rate detection circuit. As a result, Juli, unlike most other | |
56 | * ice1724+ak4114-based cards, detects spdif input rate correctly. | |
57 | * This fact is applied in the driver, allowing to modify PCM stream rate | |
58 | * parameter according to the actual input rate. | |
59 | * | |
60 | * Juli uses the remaining three stereo-channels of its DAC to optionally | |
61 | * monitor analog input, digital input, and digital output. The corresponding | |
62 | * I2S signals are routed by Xilinx, controlled by GPIOs. | |
63 | * | |
64 | * The master mute is implemented using output muting transistors (GPIO) in | |
65 | * combination with smuting the DAC. | |
66 | * | |
67 | * The card itself has no HW master volume control, implemented using the | |
68 | * vmaster control. | |
69 | * | |
70 | * TODO: | |
71 | * researching and fixing the input monitors | |
72 | */ | |
73 | ||
1da177e4 LT |
74 | /* |
75 | * GPIO pins | |
76 | */ | |
77 | #define GPIO_FREQ_MASK (3<<0) | |
78 | #define GPIO_FREQ_32KHZ (0<<0) | |
79 | #define GPIO_FREQ_44KHZ (1<<0) | |
80 | #define GPIO_FREQ_48KHZ (2<<0) | |
81 | #define GPIO_MULTI_MASK (3<<2) | |
82 | #define GPIO_MULTI_4X (0<<2) | |
83 | #define GPIO_MULTI_2X (1<<2) | |
84 | #define GPIO_MULTI_1X (2<<2) /* also external */ | |
85 | #define GPIO_MULTI_HALF (3<<2) | |
d16be8ed PH |
86 | #define GPIO_INTERNAL_CLOCK (1<<4) /* 0 = external, 1 = internal */ |
87 | #define GPIO_CLOCK_MASK (1<<4) | |
1da177e4 LT |
88 | #define GPIO_ANALOG_PRESENT (1<<5) /* RO only: 0 = present */ |
89 | #define GPIO_RXMCLK_SEL (1<<7) /* must be 0 */ | |
90 | #define GPIO_AK5385A_CKS0 (1<<8) | |
d16be8ed PH |
91 | #define GPIO_AK5385A_DFS1 (1<<9) |
92 | #define GPIO_AK5385A_DFS0 (1<<10) | |
1da177e4 LT |
93 | #define GPIO_DIGOUT_MONITOR (1<<11) /* 1 = active */ |
94 | #define GPIO_DIGIN_MONITOR (1<<12) /* 1 = active */ | |
95 | #define GPIO_ANAIN_MONITOR (1<<13) /* 1 = active */ | |
d16be8ed PH |
96 | #define GPIO_AK5385A_CKS1 (1<<14) /* must be 0 */ |
97 | #define GPIO_MUTE_CONTROL (1<<15) /* output mute, 1 = muted */ | |
98 | ||
99 | #define GPIO_RATE_MASK (GPIO_FREQ_MASK | GPIO_MULTI_MASK | \ | |
100 | GPIO_CLOCK_MASK) | |
101 | #define GPIO_AK5385A_MASK (GPIO_AK5385A_CKS0 | GPIO_AK5385A_DFS0 | \ | |
102 | GPIO_AK5385A_DFS1 | GPIO_AK5385A_CKS1) | |
103 | ||
104 | #define JULI_PCM_RATE (SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \ | |
105 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ | |
106 | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \ | |
107 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \ | |
108 | SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000) | |
109 | ||
110 | #define GPIO_RATE_16000 (GPIO_FREQ_32KHZ | GPIO_MULTI_HALF | \ | |
111 | GPIO_INTERNAL_CLOCK) | |
112 | #define GPIO_RATE_22050 (GPIO_FREQ_44KHZ | GPIO_MULTI_HALF | \ | |
113 | GPIO_INTERNAL_CLOCK) | |
114 | #define GPIO_RATE_24000 (GPIO_FREQ_48KHZ | GPIO_MULTI_HALF | \ | |
115 | GPIO_INTERNAL_CLOCK) | |
116 | #define GPIO_RATE_32000 (GPIO_FREQ_32KHZ | GPIO_MULTI_1X | \ | |
117 | GPIO_INTERNAL_CLOCK) | |
118 | #define GPIO_RATE_44100 (GPIO_FREQ_44KHZ | GPIO_MULTI_1X | \ | |
119 | GPIO_INTERNAL_CLOCK) | |
120 | #define GPIO_RATE_48000 (GPIO_FREQ_48KHZ | GPIO_MULTI_1X | \ | |
121 | GPIO_INTERNAL_CLOCK) | |
122 | #define GPIO_RATE_64000 (GPIO_FREQ_32KHZ | GPIO_MULTI_2X | \ | |
123 | GPIO_INTERNAL_CLOCK) | |
124 | #define GPIO_RATE_88200 (GPIO_FREQ_44KHZ | GPIO_MULTI_2X | \ | |
125 | GPIO_INTERNAL_CLOCK) | |
126 | #define GPIO_RATE_96000 (GPIO_FREQ_48KHZ | GPIO_MULTI_2X | \ | |
127 | GPIO_INTERNAL_CLOCK) | |
128 | #define GPIO_RATE_176400 (GPIO_FREQ_44KHZ | GPIO_MULTI_4X | \ | |
129 | GPIO_INTERNAL_CLOCK) | |
130 | #define GPIO_RATE_192000 (GPIO_FREQ_48KHZ | GPIO_MULTI_4X | \ | |
131 | GPIO_INTERNAL_CLOCK) | |
132 | ||
133 | /* | |
134 | * Initial setup of the conversion array GPIO <-> rate | |
135 | */ | |
136 | static unsigned int juli_rates[] = { | |
137 | 16000, 22050, 24000, 32000, | |
138 | 44100, 48000, 64000, 88200, | |
139 | 96000, 176400, 192000, | |
140 | }; | |
141 | ||
142 | static unsigned int gpio_vals[] = { | |
143 | GPIO_RATE_16000, GPIO_RATE_22050, GPIO_RATE_24000, GPIO_RATE_32000, | |
144 | GPIO_RATE_44100, GPIO_RATE_48000, GPIO_RATE_64000, GPIO_RATE_88200, | |
145 | GPIO_RATE_96000, GPIO_RATE_176400, GPIO_RATE_192000, | |
146 | }; | |
147 | ||
148 | static struct snd_pcm_hw_constraint_list juli_rates_info = { | |
149 | .count = ARRAY_SIZE(juli_rates), | |
150 | .list = juli_rates, | |
151 | .mask = 0, | |
152 | }; | |
153 | ||
154 | static int get_gpio_val(int rate) | |
155 | { | |
156 | int i; | |
157 | for (i = 0; i < ARRAY_SIZE(juli_rates); i++) | |
158 | if (juli_rates[i] == rate) | |
159 | return gpio_vals[i]; | |
160 | return 0; | |
161 | } | |
1da177e4 | 162 | |
cc67b7f7 VM |
163 | static void juli_ak4114_write(void *private_data, unsigned char reg, |
164 | unsigned char val) | |
1da177e4 | 165 | { |
cc67b7f7 VM |
166 | snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4114_ADDR, |
167 | reg, val); | |
1da177e4 | 168 | } |
cc67b7f7 | 169 | |
1da177e4 LT |
170 | static unsigned char juli_ak4114_read(void *private_data, unsigned char reg) |
171 | { | |
cc67b7f7 VM |
172 | return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data, |
173 | AK4114_ADDR, reg); | |
1da177e4 LT |
174 | } |
175 | ||
d16be8ed PH |
176 | /* |
177 | * If SPDIF capture and slaved to SPDIF-IN, setting runtime rate | |
178 | * to the external rate | |
179 | */ | |
c93f5a1e | 180 | static void juli_spdif_in_open(struct snd_ice1712 *ice, |
cc67b7f7 | 181 | struct snd_pcm_substream *substream) |
c93f5a1e TI |
182 | { |
183 | struct juli_spec *spec = ice->spec; | |
184 | struct snd_pcm_runtime *runtime = substream->runtime; | |
185 | int rate; | |
186 | ||
d16be8ed PH |
187 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || |
188 | !ice->is_spdif_master(ice)) | |
c93f5a1e TI |
189 | return; |
190 | rate = snd_ak4114_external_rate(spec->ak4114); | |
191 | if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) { | |
192 | runtime->hw.rate_min = rate; | |
193 | runtime->hw.rate_max = rate; | |
194 | } | |
195 | } | |
196 | ||
1da177e4 LT |
197 | /* |
198 | * AK4358 section | |
199 | */ | |
200 | ||
ab0c7d72 | 201 | static void juli_akm_lock(struct snd_akm4xxx *ak, int chip) |
1da177e4 LT |
202 | { |
203 | } | |
204 | ||
ab0c7d72 | 205 | static void juli_akm_unlock(struct snd_akm4xxx *ak, int chip) |
1da177e4 LT |
206 | { |
207 | } | |
208 | ||
ab0c7d72 | 209 | static void juli_akm_write(struct snd_akm4xxx *ak, int chip, |
1da177e4 LT |
210 | unsigned char addr, unsigned char data) |
211 | { | |
ab0c7d72 | 212 | struct snd_ice1712 *ice = ak->private_data[0]; |
1da177e4 | 213 | |
da3cec35 TI |
214 | if (snd_BUG_ON(chip)) |
215 | return; | |
1da177e4 LT |
216 | snd_vt1724_write_i2c(ice, AK4358_ADDR, addr, data); |
217 | } | |
218 | ||
219 | /* | |
d16be8ed | 220 | * change the rate of envy24HT, AK4358, AK5385 |
1da177e4 | 221 | */ |
ab0c7d72 | 222 | static void juli_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate) |
1da177e4 | 223 | { |
d16be8ed PH |
224 | unsigned char old, tmp, ak4358_dfs; |
225 | unsigned int ak5385_pins, old_gpio, new_gpio; | |
226 | struct snd_ice1712 *ice = ak->private_data[0]; | |
227 | struct juli_spec *spec = ice->spec; | |
1da177e4 | 228 | |
d16be8ed PH |
229 | if (rate == 0) /* no hint - S/PDIF input is master or the new spdif |
230 | input rate undetected, simply return */ | |
1da177e4 | 231 | return; |
d16be8ed | 232 | |
1da177e4 | 233 | /* adjust DFS on codecs */ |
d16be8ed PH |
234 | if (rate > 96000) { |
235 | ak4358_dfs = 2; | |
236 | ak5385_pins = GPIO_AK5385A_DFS1 | GPIO_AK5385A_CKS0; | |
237 | } else if (rate > 48000) { | |
238 | ak4358_dfs = 1; | |
239 | ak5385_pins = GPIO_AK5385A_DFS0; | |
240 | } else { | |
241 | ak4358_dfs = 0; | |
242 | ak5385_pins = 0; | |
243 | } | |
244 | /* AK5385 first, since it requires cold reset affecting both codecs */ | |
245 | old_gpio = ice->gpio.get_data(ice); | |
246 | new_gpio = (old_gpio & ~GPIO_AK5385A_MASK) | ak5385_pins; | |
6dfb5aff | 247 | /* dev_dbg(ice->card->dev, "JULI - ak5385 set_rate_val: new gpio 0x%x\n", |
d16be8ed PH |
248 | new_gpio); */ |
249 | ice->gpio.set_data(ice, new_gpio); | |
250 | ||
251 | /* cold reset */ | |
252 | old = inb(ICEMT1724(ice, AC97_CMD)); | |
253 | outb(old | VT1724_AC97_COLD, ICEMT1724(ice, AC97_CMD)); | |
254 | udelay(1); | |
255 | outb(old & ~VT1724_AC97_COLD, ICEMT1724(ice, AC97_CMD)); | |
256 | ||
257 | /* AK4358 */ | |
258 | /* set new value, reset DFS */ | |
1da177e4 | 259 | tmp = snd_akm4xxx_get(ak, 0, 2); |
1da177e4 LT |
260 | snd_akm4xxx_reset(ak, 1); |
261 | tmp = snd_akm4xxx_get(ak, 0, 2); | |
262 | tmp &= ~(0x03 << 4); | |
d16be8ed | 263 | tmp |= ak4358_dfs << 4; |
1da177e4 LT |
264 | snd_akm4xxx_set(ak, 0, 2, tmp); |
265 | snd_akm4xxx_reset(ak, 0); | |
d16be8ed PH |
266 | |
267 | /* reinit ak4114 */ | |
268 | snd_ak4114_reinit(spec->ak4114); | |
1da177e4 LT |
269 | } |
270 | ||
d16be8ed PH |
271 | #define AK_DAC(xname, xch) { .name = xname, .num_channels = xch } |
272 | #define PCM_VOLUME "PCM Playback Volume" | |
273 | #define MONITOR_AN_IN_VOLUME "Monitor Analog In Volume" | |
274 | #define MONITOR_DIG_IN_VOLUME "Monitor Digital In Volume" | |
275 | #define MONITOR_DIG_OUT_VOLUME "Monitor Digital Out Volume" | |
276 | ||
277 | static const struct snd_akm4xxx_dac_channel juli_dac[] = { | |
278 | AK_DAC(PCM_VOLUME, 2), | |
279 | AK_DAC(MONITOR_AN_IN_VOLUME, 2), | |
280 | AK_DAC(MONITOR_DIG_OUT_VOLUME, 2), | |
281 | AK_DAC(MONITOR_DIG_IN_VOLUME, 2), | |
282 | }; | |
283 | ||
284 | ||
e23e7a14 | 285 | static struct snd_akm4xxx akm_juli_dac = { |
1da177e4 | 286 | .type = SND_AK4358, |
d16be8ed PH |
287 | .num_dacs = 8, /* DAC1 - analog out |
288 | DAC2 - analog in monitor | |
289 | DAC3 - digital out monitor | |
290 | DAC4 - digital in monitor | |
291 | */ | |
1da177e4 LT |
292 | .ops = { |
293 | .lock = juli_akm_lock, | |
294 | .unlock = juli_akm_unlock, | |
295 | .write = juli_akm_write, | |
296 | .set_rate_val = juli_akm_set_rate_val | |
d16be8ed PH |
297 | }, |
298 | .dac_info = juli_dac, | |
299 | }; | |
300 | ||
301 | #define juli_mute_info snd_ctl_boolean_mono_info | |
302 | ||
303 | static int juli_mute_get(struct snd_kcontrol *kcontrol, | |
304 | struct snd_ctl_elem_value *ucontrol) | |
305 | { | |
306 | struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); | |
307 | unsigned int val; | |
308 | val = ice->gpio.get_data(ice) & (unsigned int) kcontrol->private_value; | |
309 | if (kcontrol->private_value == GPIO_MUTE_CONTROL) | |
310 | /* val 0 = signal on */ | |
311 | ucontrol->value.integer.value[0] = (val) ? 0 : 1; | |
312 | else | |
313 | /* val 1 = signal on */ | |
314 | ucontrol->value.integer.value[0] = (val) ? 1 : 0; | |
315 | return 0; | |
316 | } | |
317 | ||
318 | static int juli_mute_put(struct snd_kcontrol *kcontrol, | |
319 | struct snd_ctl_elem_value *ucontrol) | |
320 | { | |
321 | struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol); | |
322 | unsigned int old_gpio, new_gpio; | |
323 | old_gpio = ice->gpio.get_data(ice); | |
324 | if (ucontrol->value.integer.value[0]) { | |
325 | /* unmute */ | |
326 | if (kcontrol->private_value == GPIO_MUTE_CONTROL) { | |
327 | /* 0 = signal on */ | |
328 | new_gpio = old_gpio & ~GPIO_MUTE_CONTROL; | |
329 | /* un-smuting DAC */ | |
330 | snd_akm4xxx_write(ice->akm, 0, 0x01, 0x01); | |
331 | } else | |
332 | /* 1 = signal on */ | |
333 | new_gpio = old_gpio | | |
334 | (unsigned int) kcontrol->private_value; | |
335 | } else { | |
336 | /* mute */ | |
337 | if (kcontrol->private_value == GPIO_MUTE_CONTROL) { | |
338 | /* 1 = signal off */ | |
339 | new_gpio = old_gpio | GPIO_MUTE_CONTROL; | |
340 | /* smuting DAC */ | |
341 | snd_akm4xxx_write(ice->akm, 0, 0x01, 0x03); | |
342 | } else | |
343 | /* 0 = signal off */ | |
344 | new_gpio = old_gpio & | |
345 | ~((unsigned int) kcontrol->private_value); | |
346 | } | |
6dfb5aff | 347 | /* dev_dbg(ice->card->dev, |
e2ea7cfc TI |
348 | "JULI - mute/unmute: control_value: 0x%x, old_gpio: 0x%x, " |
349 | "new_gpio 0x%x\n", | |
d16be8ed PH |
350 | (unsigned int)ucontrol->value.integer.value[0], old_gpio, |
351 | new_gpio); */ | |
352 | if (old_gpio != new_gpio) { | |
353 | ice->gpio.set_data(ice, new_gpio); | |
354 | return 1; | |
355 | } | |
356 | /* no change */ | |
357 | return 0; | |
358 | } | |
359 | ||
e23e7a14 | 360 | static struct snd_kcontrol_new juli_mute_controls[] = { |
d16be8ed PH |
361 | { |
362 | .iface = SNDRV_CTL_ELEM_IFACE_MIXER, | |
363 | .name = "Master Playback Switch", | |
364 | .info = juli_mute_info, | |
365 | .get = juli_mute_get, | |
366 | .put = juli_mute_put, | |
367 | .private_value = GPIO_MUTE_CONTROL, | |
368 | }, | |
369 | /* Although the following functionality respects the succint NDA'd | |
370 | * documentation from the card manufacturer, and the same way of | |
371 | * operation is coded in OSS Juli driver, only Digital Out monitor | |
372 | * seems to work. Surprisingly, Analog input monitor outputs Digital | |
373 | * output data. The two are independent, as enabling both doubles | |
374 | * volume of the monitor sound. | |
375 | * | |
376 | * Checking traces on the board suggests the functionality described | |
377 | * by the manufacturer is correct - I2S from ADC and AK4114 | |
378 | * go to ICE as well as to Xilinx, I2S inputs of DAC2,3,4 (the monitor | |
379 | * inputs) are fed from Xilinx. | |
380 | * | |
381 | * I even checked traces on board and coded a support in driver for | |
06fe9fb4 | 382 | * an alternative possibility - the unused I2S ICE output channels |
d16be8ed PH |
383 | * switched to HW-IN/SPDIF-IN and providing the monitoring signal to |
384 | * the DAC - to no avail. The I2S outputs seem to be unconnected. | |
385 | * | |
386 | * The windows driver supports the monitoring correctly. | |
387 | */ | |
388 | { | |
389 | .iface = SNDRV_CTL_ELEM_IFACE_MIXER, | |
390 | .name = "Monitor Analog In Switch", | |
391 | .info = juli_mute_info, | |
392 | .get = juli_mute_get, | |
393 | .put = juli_mute_put, | |
394 | .private_value = GPIO_ANAIN_MONITOR, | |
395 | }, | |
396 | { | |
397 | .iface = SNDRV_CTL_ELEM_IFACE_MIXER, | |
398 | .name = "Monitor Digital Out Switch", | |
399 | .info = juli_mute_info, | |
400 | .get = juli_mute_get, | |
401 | .put = juli_mute_put, | |
402 | .private_value = GPIO_DIGOUT_MONITOR, | |
403 | }, | |
404 | { | |
405 | .iface = SNDRV_CTL_ELEM_IFACE_MIXER, | |
406 | .name = "Monitor Digital In Switch", | |
407 | .info = juli_mute_info, | |
408 | .get = juli_mute_get, | |
409 | .put = juli_mute_put, | |
410 | .private_value = GPIO_DIGIN_MONITOR, | |
411 | }, | |
412 | }; | |
413 | ||
e23e7a14 | 414 | static char *slave_vols[] = { |
d16be8ed PH |
415 | PCM_VOLUME, |
416 | MONITOR_AN_IN_VOLUME, | |
417 | MONITOR_DIG_IN_VOLUME, | |
418 | MONITOR_DIG_OUT_VOLUME, | |
419 | NULL | |
1da177e4 LT |
420 | }; |
421 | ||
e23e7a14 | 422 | static |
d16be8ed PH |
423 | DECLARE_TLV_DB_SCALE(juli_master_db_scale, -6350, 50, 1); |
424 | ||
e23e7a14 BP |
425 | static struct snd_kcontrol *ctl_find(struct snd_card *card, |
426 | const char *name) | |
d16be8ed PH |
427 | { |
428 | struct snd_ctl_elem_id sid; | |
429 | memset(&sid, 0, sizeof(sid)); | |
430 | /* FIXME: strcpy is bad. */ | |
431 | strcpy(sid.name, name); | |
432 | sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER; | |
433 | return snd_ctl_find_id(card, &sid); | |
434 | } | |
435 | ||
e23e7a14 BP |
436 | static void add_slaves(struct snd_card *card, |
437 | struct snd_kcontrol *master, | |
438 | char * const *list) | |
d16be8ed PH |
439 | { |
440 | for (; *list; list++) { | |
441 | struct snd_kcontrol *slave = ctl_find(card, *list); | |
6dfb5aff | 442 | /* dev_dbg(card->dev, "add_slaves - %s\n", *list); */ |
d16be8ed | 443 | if (slave) { |
6dfb5aff | 444 | /* dev_dbg(card->dev, "slave %s found\n", *list); */ |
d16be8ed PH |
445 | snd_ctl_add_slave(master, slave); |
446 | } | |
447 | } | |
448 | } | |
449 | ||
e23e7a14 | 450 | static int juli_add_controls(struct snd_ice1712 *ice) |
1da177e4 | 451 | { |
7cda8ba9 | 452 | struct juli_spec *spec = ice->spec; |
fdd4bb49 | 453 | int err; |
d16be8ed PH |
454 | unsigned int i; |
455 | struct snd_kcontrol *vmaster; | |
456 | ||
fdd4bb49 TI |
457 | err = snd_ice1712_akm4xxx_build_controls(ice); |
458 | if (err < 0) | |
459 | return err; | |
d16be8ed PH |
460 | |
461 | for (i = 0; i < ARRAY_SIZE(juli_mute_controls); i++) { | |
462 | err = snd_ctl_add(ice->card, | |
463 | snd_ctl_new1(&juli_mute_controls[i], ice)); | |
464 | if (err < 0) | |
465 | return err; | |
466 | } | |
467 | /* Create virtual master control */ | |
468 | vmaster = snd_ctl_make_virtual_master("Master Playback Volume", | |
469 | juli_master_db_scale); | |
470 | if (!vmaster) | |
471 | return -ENOMEM; | |
472 | add_slaves(ice->card, vmaster, slave_vols); | |
473 | err = snd_ctl_add(ice->card, vmaster); | |
474 | if (err < 0) | |
475 | return err; | |
476 | ||
fdd4bb49 | 477 | /* only capture SPDIF over AK4114 */ |
7cda8ba9 | 478 | err = snd_ak4114_build(spec->ak4114, NULL, |
d16be8ed | 479 | ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream); |
fdd4bb49 TI |
480 | if (err < 0) |
481 | return err; | |
482 | return 0; | |
1da177e4 LT |
483 | } |
484 | ||
50d40f18 AK |
485 | /* |
486 | * suspend/resume | |
487 | * */ | |
488 | ||
c7561cd8 | 489 | #ifdef CONFIG_PM_SLEEP |
50d40f18 AK |
490 | static int juli_resume(struct snd_ice1712 *ice) |
491 | { | |
492 | struct snd_akm4xxx *ak = ice->akm; | |
493 | struct juli_spec *spec = ice->spec; | |
494 | /* akm4358 un-reset, un-mute */ | |
495 | snd_akm4xxx_reset(ak, 0); | |
496 | /* reinit ak4114 */ | |
497 | snd_ak4114_reinit(spec->ak4114); | |
498 | return 0; | |
499 | } | |
500 | ||
501 | static int juli_suspend(struct snd_ice1712 *ice) | |
502 | { | |
503 | struct snd_akm4xxx *ak = ice->akm; | |
504 | /* akm4358 reset and soft-mute */ | |
505 | snd_akm4xxx_reset(ak, 1); | |
506 | return 0; | |
507 | } | |
508 | #endif | |
509 | ||
1da177e4 LT |
510 | /* |
511 | * initialize the chip | |
512 | */ | |
d16be8ed PH |
513 | |
514 | static inline int juli_is_spdif_master(struct snd_ice1712 *ice) | |
515 | { | |
516 | return (ice->gpio.get_data(ice) & GPIO_INTERNAL_CLOCK) ? 0 : 1; | |
517 | } | |
518 | ||
519 | static unsigned int juli_get_rate(struct snd_ice1712 *ice) | |
520 | { | |
521 | int i; | |
522 | unsigned char result; | |
523 | ||
524 | result = ice->gpio.get_data(ice) & GPIO_RATE_MASK; | |
525 | for (i = 0; i < ARRAY_SIZE(gpio_vals); i++) | |
526 | if (gpio_vals[i] == result) | |
527 | return juli_rates[i]; | |
528 | return 0; | |
529 | } | |
530 | ||
531 | /* setting new rate */ | |
532 | static void juli_set_rate(struct snd_ice1712 *ice, unsigned int rate) | |
533 | { | |
534 | unsigned int old, new; | |
535 | unsigned char val; | |
536 | ||
537 | old = ice->gpio.get_data(ice); | |
538 | new = (old & ~GPIO_RATE_MASK) | get_gpio_val(rate); | |
6dfb5aff | 539 | /* dev_dbg(ice->card->dev, "JULI - set_rate: old %x, new %x\n", |
d16be8ed PH |
540 | old & GPIO_RATE_MASK, |
541 | new & GPIO_RATE_MASK); */ | |
542 | ||
543 | ice->gpio.set_data(ice, new); | |
544 | /* switching to external clock - supplied by external circuits */ | |
545 | val = inb(ICEMT1724(ice, RATE)); | |
546 | outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE)); | |
547 | } | |
548 | ||
549 | static inline unsigned char juli_set_mclk(struct snd_ice1712 *ice, | |
550 | unsigned int rate) | |
551 | { | |
552 | /* no change in master clock */ | |
553 | return 0; | |
554 | } | |
555 | ||
556 | /* setting clock to external - SPDIF */ | |
1ff97cb9 | 557 | static int juli_set_spdif_clock(struct snd_ice1712 *ice, int type) |
d16be8ed PH |
558 | { |
559 | unsigned int old; | |
560 | old = ice->gpio.get_data(ice); | |
561 | /* external clock (= 0), multiply 1x, 48kHz */ | |
562 | ice->gpio.set_data(ice, (old & ~GPIO_RATE_MASK) | GPIO_MULTI_1X | | |
563 | GPIO_FREQ_48KHZ); | |
1ff97cb9 | 564 | return 0; |
d16be8ed PH |
565 | } |
566 | ||
567 | /* Called when ak4114 detects change in the input SPDIF stream */ | |
568 | static void juli_ak4114_change(struct ak4114 *ak4114, unsigned char c0, | |
569 | unsigned char c1) | |
570 | { | |
571 | struct snd_ice1712 *ice = ak4114->change_callback_private; | |
572 | int rate; | |
573 | if (ice->is_spdif_master(ice) && c1) { | |
574 | /* only for SPDIF master mode, rate was changed */ | |
575 | rate = snd_ak4114_external_rate(ak4114); | |
6dfb5aff | 576 | /* dev_dbg(ice->card->dev, "ak4114 - input rate changed to %d\n", |
d16be8ed PH |
577 | rate); */ |
578 | juli_akm_set_rate_val(ice->akm, rate); | |
579 | } | |
580 | } | |
581 | ||
e23e7a14 | 582 | static int juli_init(struct snd_ice1712 *ice) |
1da177e4 | 583 | { |
517400cb | 584 | static const unsigned char ak4114_init_vals[] = { |
cc67b7f7 VM |
585 | /* AK4117_REG_PWRDN */ AK4114_RST | AK4114_PWN | |
586 | AK4114_OCKS0 | AK4114_OCKS1, | |
1da177e4 LT |
587 | /* AK4114_REQ_FORMAT */ AK4114_DIF_I24I2S, |
588 | /* AK4114_REG_IO0 */ AK4114_TX1E, | |
cc67b7f7 VM |
589 | /* AK4114_REG_IO1 */ AK4114_EFH_1024 | AK4114_DIT | |
590 | AK4114_IPS(1), | |
1da177e4 LT |
591 | /* AK4114_REG_INT0_MASK */ 0, |
592 | /* AK4114_REG_INT1_MASK */ 0 | |
593 | }; | |
517400cb | 594 | static const unsigned char ak4114_init_txcsb[] = { |
1da177e4 LT |
595 | 0x41, 0x02, 0x2c, 0x00, 0x00 |
596 | }; | |
597 | int err; | |
7cda8ba9 | 598 | struct juli_spec *spec; |
ab0c7d72 | 599 | struct snd_akm4xxx *ak; |
1da177e4 | 600 | |
7cda8ba9 TI |
601 | spec = kzalloc(sizeof(*spec), GFP_KERNEL); |
602 | if (!spec) | |
603 | return -ENOMEM; | |
604 | ice->spec = spec; | |
605 | ||
1da177e4 LT |
606 | err = snd_ak4114_create(ice->card, |
607 | juli_ak4114_read, | |
608 | juli_ak4114_write, | |
609 | ak4114_init_vals, ak4114_init_txcsb, | |
7cda8ba9 | 610 | ice, &spec->ak4114); |
1da177e4 LT |
611 | if (err < 0) |
612 | return err; | |
d16be8ed PH |
613 | /* callback for codecs rate setting */ |
614 | spec->ak4114->change_callback = juli_ak4114_change; | |
615 | spec->ak4114->change_callback_private = ice; | |
616 | /* AK4114 in Juli can detect external rate correctly */ | |
617 | spec->ak4114->check_flags = 0; | |
1da177e4 | 618 | |
fd6715e5 | 619 | #if 0 |
cc67b7f7 VM |
620 | /* |
621 | * it seems that the analog doughter board detection does not work reliably, so | |
622 | * force the analog flag; it should be very rare (if ever) to come at Juli@ | |
623 | * used without the analog daughter board | |
624 | */ | |
7cda8ba9 | 625 | spec->analog = (ice->gpio.get_data(ice) & GPIO_ANALOG_PRESENT) ? 0 : 1; |
fd6715e5 | 626 | #else |
cc67b7f7 | 627 | spec->analog = 1; |
fd6715e5 | 628 | #endif |
1da177e4 | 629 | |
7cda8ba9 | 630 | if (spec->analog) { |
6dfb5aff | 631 | dev_info(ice->card->dev, "juli@: analog I/O detected\n"); |
1da177e4 LT |
632 | ice->num_total_dacs = 2; |
633 | ice->num_total_adcs = 2; | |
634 | ||
cc67b7f7 VM |
635 | ice->akm = kzalloc(sizeof(struct snd_akm4xxx), GFP_KERNEL); |
636 | ak = ice->akm; | |
637 | if (!ak) | |
1da177e4 LT |
638 | return -ENOMEM; |
639 | ice->akm_codecs = 1; | |
cc67b7f7 VM |
640 | err = snd_ice1712_akm4xxx_init(ak, &akm_juli_dac, NULL, ice); |
641 | if (err < 0) | |
1da177e4 LT |
642 | return err; |
643 | } | |
cc67b7f7 | 644 | |
d16be8ed PH |
645 | /* juli is clocked by Xilinx array */ |
646 | ice->hw_rates = &juli_rates_info; | |
647 | ice->is_spdif_master = juli_is_spdif_master; | |
648 | ice->get_rate = juli_get_rate; | |
649 | ice->set_rate = juli_set_rate; | |
650 | ice->set_mclk = juli_set_mclk; | |
651 | ice->set_spdif_clock = juli_set_spdif_clock; | |
652 | ||
c93f5a1e | 653 | ice->spdif.ops.open = juli_spdif_in_open; |
50d40f18 | 654 | |
c7561cd8 | 655 | #ifdef CONFIG_PM_SLEEP |
50d40f18 AK |
656 | ice->pm_resume = juli_resume; |
657 | ice->pm_suspend = juli_suspend; | |
658 | ice->pm_suspend_enabled = 1; | |
659 | #endif | |
660 | ||
1da177e4 LT |
661 | return 0; |
662 | } | |
663 | ||
664 | ||
665 | /* | |
666 | * Juli@ boards don't provide the EEPROM data except for the vendor IDs. | |
667 | * hence the driver needs to sets up it properly. | |
668 | */ | |
669 | ||
e23e7a14 | 670 | static unsigned char juli_eeprom[] = { |
d16be8ed PH |
671 | [ICE_EEP2_SYSCONF] = 0x2b, /* clock 512, mpu401, 1xADC, 1xDACs, |
672 | SPDIF in */ | |
189bc171 TI |
673 | [ICE_EEP2_ACLINK] = 0x80, /* I2S */ |
674 | [ICE_EEP2_I2S] = 0xf8, /* vol, 96k, 24bit, 192k */ | |
675 | [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */ | |
d16be8ed | 676 | [ICE_EEP2_GPIO_DIR] = 0x9f, /* 5, 6:inputs; 7, 4-0 outputs*/ |
189bc171 TI |
677 | [ICE_EEP2_GPIO_DIR1] = 0xff, |
678 | [ICE_EEP2_GPIO_DIR2] = 0x7f, | |
d16be8ed PH |
679 | [ICE_EEP2_GPIO_MASK] = 0x60, /* 5, 6: locked; 7, 4-0 writable */ |
680 | [ICE_EEP2_GPIO_MASK1] = 0x00, /* 0-7 writable */ | |
189bc171 | 681 | [ICE_EEP2_GPIO_MASK2] = 0x7f, |
d16be8ed PH |
682 | [ICE_EEP2_GPIO_STATE] = GPIO_FREQ_48KHZ | GPIO_MULTI_1X | |
683 | GPIO_INTERNAL_CLOCK, /* internal clock, multiple 1x, 48kHz*/ | |
684 | [ICE_EEP2_GPIO_STATE1] = 0x00, /* unmuted */ | |
189bc171 | 685 | [ICE_EEP2_GPIO_STATE2] = 0x00, |
1da177e4 LT |
686 | }; |
687 | ||
688 | /* entry point */ | |
e23e7a14 | 689 | struct snd_ice1712_card_info snd_vt1724_juli_cards[] = { |
1da177e4 LT |
690 | { |
691 | .subvendor = VT1724_SUBDEVICE_JULI, | |
692 | .name = "ESI Juli@", | |
693 | .model = "juli", | |
694 | .chip_init = juli_init, | |
695 | .build_controls = juli_add_controls, | |
696 | .eeprom_size = sizeof(juli_eeprom), | |
697 | .eeprom_data = juli_eeprom, | |
698 | }, | |
699 | { } /* terminator */ | |
700 | }; |