Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
f30c2269 | 2 | * sound/oss/pas2_card.c |
1da177e4 LT |
3 | * |
4 | * Detection routine for the Pro Audio Spectrum cards. | |
5 | */ | |
6 | ||
1da177e4 LT |
7 | #include <linux/init.h> |
8 | #include <linux/interrupt.h> | |
9 | #include <linux/module.h> | |
10 | #include <linux/spinlock.h> | |
11 | #include "sound_config.h" | |
12 | ||
13 | #include "pas2.h" | |
14 | #include "sb.h" | |
15 | ||
16 | static unsigned char dma_bits[] = { | |
17 | 4, 1, 2, 3, 0, 5, 6, 7 | |
18 | }; | |
19 | ||
20 | static unsigned char irq_bits[] = { | |
21 | 0, 0, 1, 2, 3, 4, 5, 6, 0, 1, 7, 8, 9, 0, 10, 11 | |
22 | }; | |
23 | ||
24 | static unsigned char sb_irq_bits[] = { | |
25 | 0x00, 0x00, 0x08, 0x10, 0x00, 0x18, 0x00, 0x20, | |
26 | 0x00, 0x08, 0x28, 0x30, 0x38, 0, 0 | |
27 | }; | |
28 | ||
29 | static unsigned char sb_dma_bits[] = { | |
30 | 0x00, 0x40, 0x80, 0xC0, 0, 0, 0, 0 | |
31 | }; | |
32 | ||
33 | /* | |
34 | * The Address Translation code is used to convert I/O register addresses to | |
35 | * be relative to the given base -register | |
36 | */ | |
37 | ||
38 | int pas_translate_code = 0; | |
39 | static int pas_intr_mask; | |
40 | static int pas_irq; | |
41 | static int pas_sb_base; | |
42 | DEFINE_SPINLOCK(pas_lock); | |
43 | #ifndef CONFIG_PAS_JOYSTICK | |
a67ff6a5 | 44 | static bool joystick; |
1da177e4 | 45 | #else |
a67ff6a5 | 46 | static bool joystick = 1; |
1da177e4 LT |
47 | #endif |
48 | #ifdef SYMPHONY_PAS | |
a67ff6a5 | 49 | static bool symphony = 1; |
1da177e4 | 50 | #else |
a67ff6a5 | 51 | static bool symphony; |
1da177e4 LT |
52 | #endif |
53 | #ifdef BROKEN_BUS_CLOCK | |
a67ff6a5 | 54 | static bool broken_bus_clock = 1; |
1da177e4 | 55 | #else |
a67ff6a5 | 56 | static bool broken_bus_clock; |
1da177e4 LT |
57 | #endif |
58 | ||
59 | static struct address_info cfg; | |
60 | static struct address_info cfg2; | |
61 | ||
62 | char pas_model = 0; | |
63 | static char *pas_model_names[] = { | |
64 | "", | |
65 | "Pro AudioSpectrum+", | |
66 | "CDPC", | |
67 | "Pro AudioSpectrum 16", | |
68 | "Pro AudioSpectrum 16D" | |
69 | }; | |
70 | ||
71 | /* | |
72 | * pas_read() and pas_write() are equivalents of inb and outb | |
73 | * These routines perform the I/O address translation required | |
74 | * to support other than the default base address | |
75 | */ | |
76 | ||
77 | extern void mix_write(unsigned char data, int ioaddr); | |
78 | ||
79 | unsigned char pas_read(int ioaddr) | |
80 | { | |
81 | return inb(ioaddr + pas_translate_code); | |
82 | } | |
83 | ||
84 | void pas_write(unsigned char data, int ioaddr) | |
85 | { | |
86 | outb((data), ioaddr + pas_translate_code); | |
87 | } | |
88 | ||
89 | /******************* Begin of the Interrupt Handler ********************/ | |
90 | ||
7d12e780 | 91 | static irqreturn_t pasintr(int irq, void *dev_id) |
1da177e4 LT |
92 | { |
93 | int status; | |
94 | ||
95 | status = pas_read(0x0B89); | |
96 | pas_write(status, 0x0B89); /* Clear interrupt */ | |
97 | ||
98 | if (status & 0x08) | |
99 | { | |
100 | pas_pcm_interrupt(status, 1); | |
101 | status &= ~0x08; | |
102 | } | |
103 | if (status & 0x10) | |
104 | { | |
105 | pas_midi_interrupt(); | |
106 | status &= ~0x10; | |
107 | } | |
108 | return IRQ_HANDLED; | |
109 | } | |
110 | ||
111 | int pas_set_intr(int mask) | |
112 | { | |
113 | if (!mask) | |
114 | return 0; | |
115 | ||
116 | pas_intr_mask |= mask; | |
117 | ||
118 | pas_write(pas_intr_mask, 0x0B8B); | |
119 | return 0; | |
120 | } | |
121 | ||
122 | int pas_remove_intr(int mask) | |
123 | { | |
124 | if (!mask) | |
125 | return 0; | |
126 | ||
127 | pas_intr_mask &= ~mask; | |
128 | pas_write(pas_intr_mask, 0x0B8B); | |
129 | ||
130 | return 0; | |
131 | } | |
132 | ||
133 | /******************* End of the Interrupt handler **********************/ | |
134 | ||
135 | /******************* Begin of the Initialization Code ******************/ | |
136 | ||
137 | static int __init config_pas_hw(struct address_info *hw_config) | |
138 | { | |
139 | char ok = 1; | |
140 | unsigned int_ptrs; /* scsi/sound interrupt pointers */ | |
141 | ||
142 | pas_irq = hw_config->irq; | |
143 | ||
144 | pas_write(0x00, 0x0B8B); | |
145 | pas_write(0x36, 0x138B); | |
146 | pas_write(0x36, 0x1388); | |
147 | pas_write(0, 0x1388); | |
148 | pas_write(0x74, 0x138B); | |
149 | pas_write(0x74, 0x1389); | |
150 | pas_write(0, 0x1389); | |
151 | ||
152 | pas_write(0x80 | 0x40 | 0x20 | 1, 0x0B8A); | |
153 | pas_write(0x80 | 0x20 | 0x10 | 0x08 | 0x01, 0xF8A); | |
154 | pas_write(0x01 | 0x02 | 0x04 | 0x10 /* | |
155 | * | | |
156 | * 0x80 | |
157 | */ , 0xB88); | |
158 | ||
c1615912 | 159 | pas_write(0x80 | (joystick ? 0x40 : 0), 0xF388); |
1da177e4 LT |
160 | |
161 | if (pas_irq < 0 || pas_irq > 15) | |
162 | { | |
163 | printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq); | |
164 | hw_config->irq=-1; | |
165 | ok = 0; | |
166 | } | |
167 | else | |
168 | { | |
169 | int_ptrs = pas_read(0xF38A); | |
170 | int_ptrs = (int_ptrs & 0xf0) | irq_bits[pas_irq]; | |
171 | pas_write(int_ptrs, 0xF38A); | |
172 | if (!irq_bits[pas_irq]) | |
173 | { | |
174 | printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq); | |
175 | hw_config->irq=-1; | |
176 | ok = 0; | |
177 | } | |
178 | else | |
179 | { | |
180 | if (request_irq(pas_irq, pasintr, 0, "PAS16",hw_config) < 0) { | |
181 | printk(KERN_ERR "PAS16: Cannot allocate IRQ %d\n",pas_irq); | |
182 | hw_config->irq=-1; | |
183 | ok = 0; | |
184 | } | |
185 | } | |
186 | } | |
187 | ||
188 | if (hw_config->dma < 0 || hw_config->dma > 7) | |
189 | { | |
190 | printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma); | |
191 | hw_config->dma=-1; | |
192 | ok = 0; | |
193 | } | |
194 | else | |
195 | { | |
196 | pas_write(dma_bits[hw_config->dma], 0xF389); | |
197 | if (!dma_bits[hw_config->dma]) | |
198 | { | |
199 | printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma); | |
200 | hw_config->dma=-1; | |
201 | ok = 0; | |
202 | } | |
203 | else | |
204 | { | |
205 | if (sound_alloc_dma(hw_config->dma, "PAS16")) | |
206 | { | |
207 | printk(KERN_ERR "pas2_card.c: Can't allocate DMA channel\n"); | |
208 | hw_config->dma=-1; | |
209 | ok = 0; | |
210 | } | |
211 | } | |
212 | } | |
213 | ||
214 | /* | |
215 | * This fixes the timing problems of the PAS due to the Symphony chipset | |
216 | * as per Media Vision. Only define this if your PAS doesn't work correctly. | |
217 | */ | |
218 | ||
219 | if(symphony) | |
220 | { | |
221 | outb((0x05), 0xa8); | |
222 | outb((0x60), 0xa9); | |
223 | } | |
224 | ||
225 | if(broken_bus_clock) | |
226 | pas_write(0x01 | 0x10 | 0x20 | 0x04, 0x8388); | |
227 | else | |
228 | /* | |
229 | * pas_write(0x01, 0x8388); | |
230 | */ | |
231 | pas_write(0x01 | 0x10 | 0x20, 0x8388); | |
232 | ||
233 | pas_write(0x18, 0x838A); /* ??? */ | |
234 | pas_write(0x20 | 0x01, 0x0B8A); /* Mute off, filter = 17.897 kHz */ | |
235 | pas_write(8, 0xBF8A); | |
236 | ||
237 | mix_write(0x80 | 5, 0x078B); | |
238 | mix_write(5, 0x078B); | |
239 | ||
240 | { | |
241 | struct address_info *sb_config; | |
242 | ||
243 | sb_config = &cfg2; | |
244 | if (sb_config->io_base) | |
245 | { | |
246 | unsigned char irq_dma; | |
247 | ||
248 | /* | |
249 | * Turn on Sound Blaster compatibility | |
250 | * bit 1 = SB emulation | |
251 | * bit 0 = MPU401 emulation (CDPC only :-( ) | |
252 | */ | |
253 | ||
254 | pas_write(0x02, 0xF788); | |
255 | ||
256 | /* | |
257 | * "Emulation address" | |
258 | */ | |
259 | ||
260 | pas_write((sb_config->io_base >> 4) & 0x0f, 0xF789); | |
261 | pas_sb_base = sb_config->io_base; | |
262 | ||
263 | if (!sb_dma_bits[sb_config->dma]) | |
264 | printk(KERN_ERR "PAS16 Warning: Invalid SB DMA %d\n\n", sb_config->dma); | |
265 | ||
266 | if (!sb_irq_bits[sb_config->irq]) | |
267 | printk(KERN_ERR "PAS16 Warning: Invalid SB IRQ %d\n\n", sb_config->irq); | |
268 | ||
269 | irq_dma = sb_dma_bits[sb_config->dma] | | |
270 | sb_irq_bits[sb_config->irq]; | |
271 | ||
272 | pas_write(irq_dma, 0xFB8A); | |
273 | } | |
274 | else | |
275 | pas_write(0x00, 0xF788); | |
276 | } | |
277 | ||
278 | if (!ok) | |
279 | printk(KERN_WARNING "PAS16: Driver not enabled\n"); | |
280 | ||
281 | return ok; | |
282 | } | |
283 | ||
284 | static int __init detect_pas_hw(struct address_info *hw_config) | |
285 | { | |
286 | unsigned char board_id, foo; | |
287 | ||
288 | /* | |
289 | * WARNING: Setting an option like W:1 or so that disables warm boot reset | |
290 | * of the card will screw up this detect code something fierce. Adding code | |
291 | * to handle this means possibly interfering with other cards on the bus if | |
292 | * you have something on base port 0x388. SO be forewarned. | |
293 | */ | |
294 | ||
295 | outb((0xBC), 0x9A01); /* Activate first board */ | |
296 | outb((hw_config->io_base >> 2), 0x9A01); /* Set base address */ | |
297 | pas_translate_code = hw_config->io_base - 0x388; | |
298 | pas_write(1, 0xBF88); /* Select one wait states */ | |
299 | ||
300 | board_id = pas_read(0x0B8B); | |
301 | ||
302 | if (board_id == 0xff) | |
303 | return 0; | |
304 | ||
305 | /* | |
306 | * We probably have a PAS-series board, now check for a PAS16-series board | |
307 | * by trying to change the board revision bits. PAS16-series hardware won't | |
308 | * let you do this - the bits are read-only. | |
309 | */ | |
310 | ||
311 | foo = board_id ^ 0xe0; | |
312 | ||
313 | pas_write(foo, 0x0B8B); | |
314 | foo = pas_read(0x0B8B); | |
315 | pas_write(board_id, 0x0B8B); | |
316 | ||
317 | if (board_id != foo) | |
318 | return 0; | |
319 | ||
320 | pas_model = pas_read(0xFF88); | |
321 | ||
322 | return pas_model; | |
323 | } | |
324 | ||
325 | static void __init attach_pas_card(struct address_info *hw_config) | |
326 | { | |
327 | pas_irq = hw_config->irq; | |
328 | ||
329 | if (detect_pas_hw(hw_config)) | |
330 | { | |
331 | ||
332 | if ((pas_model = pas_read(0xFF88))) | |
333 | { | |
334 | char temp[100]; | |
335 | ||
dc30a436 AK |
336 | if (pas_model < 0 || |
337 | pas_model >= ARRAY_SIZE(pas_model_names)) { | |
338 | printk(KERN_ERR "pas2 unrecognized model.\n"); | |
339 | return; | |
340 | } | |
1da177e4 LT |
341 | sprintf(temp, |
342 | "%s rev %d", pas_model_names[(int) pas_model], | |
343 | pas_read(0x2789)); | |
344 | conf_printf(temp, hw_config); | |
345 | } | |
346 | if (config_pas_hw(hw_config)) | |
347 | { | |
348 | pas_pcm_init(hw_config); | |
349 | pas_midi_init(); | |
350 | pas_init_mixer(); | |
351 | } | |
352 | } | |
353 | } | |
354 | ||
355 | static inline int __init probe_pas(struct address_info *hw_config) | |
356 | { | |
357 | return detect_pas_hw(hw_config); | |
358 | } | |
359 | ||
360 | static void __exit unload_pas(struct address_info *hw_config) | |
361 | { | |
362 | extern int pas_audiodev; | |
363 | extern int pas2_mididev; | |
364 | ||
365 | if (hw_config->dma>0) | |
366 | sound_free_dma(hw_config->dma); | |
367 | if (hw_config->irq>0) | |
368 | free_irq(hw_config->irq, hw_config); | |
369 | ||
370 | if(pas_audiodev!=-1) | |
371 | sound_unload_mixerdev(audio_devs[pas_audiodev]->mixer_dev); | |
372 | if(pas2_mididev!=-1) | |
373 | sound_unload_mididev(pas2_mididev); | |
374 | if(pas_audiodev!=-1) | |
375 | sound_unload_audiodev(pas_audiodev); | |
376 | } | |
377 | ||
378 | static int __initdata io = -1; | |
379 | static int __initdata irq = -1; | |
380 | static int __initdata dma = -1; | |
381 | static int __initdata dma16 = -1; /* Set this for modules that need it */ | |
382 | ||
383 | static int __initdata sb_io = 0; | |
384 | static int __initdata sb_irq = -1; | |
385 | static int __initdata sb_dma = -1; | |
386 | static int __initdata sb_dma16 = -1; | |
387 | ||
388 | module_param(io, int, 0); | |
389 | module_param(irq, int, 0); | |
390 | module_param(dma, int, 0); | |
391 | module_param(dma16, int, 0); | |
392 | ||
393 | module_param(sb_io, int, 0); | |
394 | module_param(sb_irq, int, 0); | |
395 | module_param(sb_dma, int, 0); | |
396 | module_param(sb_dma16, int, 0); | |
397 | ||
398 | module_param(joystick, bool, 0); | |
399 | module_param(symphony, bool, 0); | |
400 | module_param(broken_bus_clock, bool, 0); | |
401 | ||
402 | MODULE_LICENSE("GPL"); | |
403 | ||
404 | static int __init init_pas2(void) | |
405 | { | |
406 | printk(KERN_INFO "Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996\n"); | |
407 | ||
408 | cfg.io_base = io; | |
409 | cfg.irq = irq; | |
410 | cfg.dma = dma; | |
411 | cfg.dma2 = dma16; | |
412 | ||
413 | cfg2.io_base = sb_io; | |
414 | cfg2.irq = sb_irq; | |
415 | cfg2.dma = sb_dma; | |
416 | cfg2.dma2 = sb_dma16; | |
417 | ||
418 | if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) { | |
419 | printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n"); | |
420 | return -EINVAL; | |
421 | } | |
422 | ||
423 | if (!probe_pas(&cfg)) | |
424 | return -ENODEV; | |
425 | attach_pas_card(&cfg); | |
426 | ||
427 | return 0; | |
428 | } | |
429 | ||
430 | static void __exit cleanup_pas2(void) | |
431 | { | |
432 | unload_pas(&cfg); | |
433 | } | |
434 | ||
435 | module_init(init_pas2); | |
436 | module_exit(cleanup_pas2); | |
437 | ||
438 | #ifndef MODULE | |
439 | static int __init setup_pas2(char *str) | |
440 | { | |
441 | /* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, sb_dma2 */ | |
442 | int ints[9]; | |
443 | ||
444 | str = get_options(str, ARRAY_SIZE(ints), ints); | |
445 | ||
446 | io = ints[1]; | |
447 | irq = ints[2]; | |
448 | dma = ints[3]; | |
449 | dma16 = ints[4]; | |
450 | ||
451 | sb_io = ints[5]; | |
452 | sb_irq = ints[6]; | |
453 | sb_dma = ints[7]; | |
454 | sb_dma16 = ints[8]; | |
455 | ||
456 | return 1; | |
457 | } | |
458 | ||
459 | __setup("pas2=", setup_pas2); | |
460 | #endif |