Commit | Line | Data |
---|---|---|
05a14d5e | 1 | #!/bin/bash |
b2441318 | 2 | # SPDX-License-Identifier: GPL-2.0 |
05a14d5e JDB |
3 | # |
4 | # Benchmark script: | |
5 | # - developed for benchmarking ingress qdisc path | |
6 | # | |
7 | # Script for injecting packets into RX path of the stack with pktgen | |
8 | # "xmit_mode netif_receive". With an invalid dst_mac this will only | |
9 | # measure the ingress code path as packets gets dropped in ip_rcv(). | |
10 | # | |
11 | # This script don't really need any hardware. It benchmarks software | |
12 | # RX path just after NIC driver level. With bursting is also | |
13 | # "removes" the SKB alloc/free overhead. | |
14 | # | |
15 | # Setup scenarios for measuring ingress qdisc (with invalid dst_mac): | |
16 | # ------------------------------------------------------------------ | |
17 | # (1) no ingress (uses static_key_false(&ingress_needed)) | |
18 | # | |
19 | # (2) ingress on other dev (change ingress_needed and calls | |
20 | # handle_ing() but exit early) | |
21 | # | |
22 | # config: tc qdisc add dev $SOMEDEV handle ffff: ingress | |
23 | # | |
24 | # (3) ingress on this dev, handle_ing() -> tc_classify() | |
25 | # | |
26 | # config: tc qdisc add dev $DEV handle ffff: ingress | |
27 | # | |
28 | # (4) ingress on this dev + drop at u32 classifier/action. | |
29 | # | |
30 | basedir=`dirname $0` | |
31 | source ${basedir}/functions.sh | |
32 | root_check_run_with_sudo "$@" | |
33 | ||
34 | # Parameter parsing via include | |
35 | source ${basedir}/parameters.sh | |
36 | # Using invalid DST_MAC will cause the packets to get dropped in | |
37 | # ip_rcv() which is part of the test | |
0f06a678 MKL |
38 | if [ -z "$DEST_IP" ]; then |
39 | [ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1" | |
40 | fi | |
05a14d5e JDB |
41 | [ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff" |
42 | [ -z "$BURST" ] && BURST=1024 | |
69137ea6 | 43 | [ -z "$COUNT" ] && COUNT="10000000" # Zero means indefinitely |
05a14d5e JDB |
44 | |
45 | # Base Config | |
46 | DELAY="0" # Zero means max speed | |
05a14d5e JDB |
47 | |
48 | # General cleanup everything since last run | |
49 | pg_ctrl "reset" | |
50 | ||
51 | # Threads are specified with parameter -t value in $THREADS | |
e0e16672 | 52 | for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do |
05a14d5e JDB |
53 | # The device name is extended with @name, using thread number to |
54 | # make then unique, but any name will do. | |
55 | dev=${DEV}@${thread} | |
56 | ||
57 | # Add remove all other devices and add_device $dev to thread | |
58 | pg_thread $thread "rem_device_all" | |
59 | pg_thread $thread "add_device" $dev | |
60 | ||
61 | # Base config of dev | |
62 | pg_set $dev "flag QUEUE_MAP_CPU" | |
63 | pg_set $dev "count $COUNT" | |
64 | pg_set $dev "pkt_size $PKT_SIZE" | |
65 | pg_set $dev "delay $DELAY" | |
66 | pg_set $dev "flag NO_TIMESTAMP" | |
67 | ||
68 | # Destination | |
69 | pg_set $dev "dst_mac $DST_MAC" | |
0f06a678 | 70 | pg_set $dev "dst$IP6 $DEST_IP" |
05a14d5e JDB |
71 | |
72 | # Inject packet into RX path of stack | |
73 | pg_set $dev "xmit_mode netif_receive" | |
74 | ||
75 | # Burst allow us to avoid measuring SKB alloc/free overhead | |
76 | pg_set $dev "burst $BURST" | |
77 | done | |
78 | ||
79 | # start_run | |
80 | echo "Running... ctrl^C to stop" >&2 | |
81 | pg_ctrl "start" | |
82 | echo "Done" >&2 | |
83 | ||
84 | # Print results | |
e0e16672 | 85 | for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do |
05a14d5e JDB |
86 | dev=${DEV}@${thread} |
87 | echo "Device: $dev" | |
88 | cat /proc/net/pktgen/$dev | grep -A2 "Result:" | |
89 | done |