[linux-2.6-block.git] / net / mac80211 / Kconfig

config MAC80211
	tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
	depends on EXPERIMENTAL
	select CRYPTO
	select CRYPTO_ECB
	select CRYPTO_ARC4
	select CRYPTO_AES
	select CRC32
	select WIRELESS_EXT
	select CFG80211
	select NET_SCH_FIFO
	---help---
	This option enables the hardware independent IEEE 802.11
	networking stack.

config MAC80211_RCSIMPLE
	bool "'simple' rate control algorithm" if EMBEDDED
	default y
	depends on MAC80211
	help
	  This option allows you to turn off the 'simple' rate
	  control algorithm in mac80211. If you do turn it off,
	  you absolutely need another rate control algorithm.

	  Say Y unless you know you will have another algorithm
	  available.

config MAC80211_RCPID
	bool "'PID' rate control algorithm" if EMBEDDED
	default y
	depends on MAC80211
	help
	  This option enables a TX rate control algorithm for
	  mac80211 that uses a PID controller to select the TX
	  rate.

	  Say Y unless you're sure you want to use a different
	  rate control algorithm.

config MAC80211_LEDS
	bool "Enable LED triggers"
	depends on MAC80211 && LEDS_TRIGGERS
	---help---
	This option enables a few LED triggers for different
	packet receive/transmit events.

config MAC80211_DEBUGFS
	bool "Export mac80211 internals in DebugFS"
	depends on MAC80211 && DEBUG_FS
	---help---
	  Select this to see extensive information about
	  the internal state of mac80211 in debugfs.

	  Say N unless you know you need this.

config MAC80211_DEBUG
	bool "Enable debugging output"
	depends on MAC80211
	---help---
	  This option will enable debug tracing output for the
	  ieee80211 network stack.

	  If you are not trying to debug or develop the ieee80211
	  subsystem, you most likely want to say N here.

config MAC80211_HT_DEBUG
       bool "Enable HT debugging output"
       depends on MAC80211_DEBUG
       ---help---
       This option enables 802.11n High Throughput features
       debug tracing output.

       If you are not trying to debug of develop the ieee80211
       subsystem, you most likely want to say N here.

config MAC80211_VERBOSE_DEBUG
	bool "Verbose debugging output"
	depends on MAC80211_DEBUG

config MAC80211_LOWTX_FRAME_DUMP
	bool "Debug frame dumping"
	depends on MAC80211_DEBUG
	---help---
	  Selecting this option will cause the stack to
	  print a message for each frame that is handed
	  to the lowlevel driver for transmission. This
	  message includes all MAC addresses and the
	  frame control field.

	  If unsure, say N and insert the debugging code
	  you require into the driver you are debugging.

config TKIP_DEBUG
	bool "TKIP debugging"
	depends on MAC80211_DEBUG

config MAC80211_DEBUG_COUNTERS
	bool "Extra statistics for TX/RX debugging"
	depends on MAC80211_DEBUG

config MAC80211_IBSS_DEBUG
	bool "Support for IBSS testing"
	depends on MAC80211_DEBUG
	---help---
	  Say Y here if you intend to debug the IBSS code.

config MAC80211_VERBOSE_PS_DEBUG
	bool "Verbose powersave mode debugging"
	depends on MAC80211_DEBUG
	---help---
	  Say Y here to print out verbose powersave
	  mode debug messages.
Commit	Line	Data
f0706e82 JB	1	config MAC80211
	2	tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
	3	depends on EXPERIMENTAL
	4	select CRYPTO
	5	select CRYPTO_ECB
	6	select CRYPTO_ARC4
	7	select CRYPTO_AES
	8	select CRC32
	9	select WIRELESS_EXT
	10	select CFG80211
	11	select NET_SCH_FIFO
	12	---help---
	13	This option enables the hardware independent IEEE 802.11
	14	networking stack.
	15
ac71c691	16	config MAC80211_RCSIMPLE
d52a60ad	17	bool "'simple' rate control algorithm" if EMBEDDED
ac71c691	18	default y
d52a60ad	19	depends on MAC80211
ac71c691 JB	20	help
	21	This option allows you to turn off the 'simple' rate
	22	control algorithm in mac80211. If you do turn it off,
	23	you absolutely need another rate control algorithm.
	24
	25	Say Y unless you know you will have another algorithm
	26	available.
	27
ad018375 MN	28	config MAC80211_RCPID
	29	bool "'PID' rate control algorithm" if EMBEDDED
	30	default y
	31	depends on MAC80211
	32	help
	33	This option enables a TX rate control algorithm for
	34	mac80211 that uses a PID controller to select the TX
	35	rate.
	36
	37	Say Y unless you're sure you want to use a different
	38	rate control algorithm.
	39
f0706e82 JB	40	config MAC80211_LEDS
	41	bool "Enable LED triggers"
	42	depends on MAC80211 && LEDS_TRIGGERS
	43	---help---
	44	This option enables a few LED triggers for different
	45	packet receive/transmit events.
	46
e9f207f0 JB	47	config MAC80211_DEBUGFS
	48	bool "Export mac80211 internals in DebugFS"
	49	depends on MAC80211 && DEBUG_FS
	50	---help---
	51	Select this to see extensive information about
	52	the internal state of mac80211 in debugfs.
	53
	54	Say N unless you know you need this.
	55
f0706e82 JB	56	config MAC80211_DEBUG
	57	bool "Enable debugging output"
	58	depends on MAC80211
	59	---help---
	60	This option will enable debug tracing output for the
	61	ieee80211 network stack.
	62
	63	If you are not trying to debug or develop the ieee80211
	64	subsystem, you most likely want to say N here.
82b3cad9 RR	65
	66	config MAC80211_HT_DEBUG
	67	bool "Enable HT debugging output"
	68	depends on MAC80211_DEBUG
	69	---help---
	70	This option enables 802.11n High Throughput features
	71	debug tracing output.
	72
	73	If you are not trying to debug of develop the ieee80211
	74	subsystem, you most likely want to say N here.
f0706e82 JB	75
	76	config MAC80211_VERBOSE_DEBUG
	77	bool "Verbose debugging output"
	78	depends on MAC80211_DEBUG
	79
	80	config MAC80211_LOWTX_FRAME_DUMP
	81	bool "Debug frame dumping"
	82	depends on MAC80211_DEBUG
	83	---help---
	84	Selecting this option will cause the stack to
	85	print a message for each frame that is handed
	86	to the lowlevel driver for transmission. This
	87	message includes all MAC addresses and the
	88	frame control field.
	89
	90	If unsure, say N and insert the debugging code
	91	you require into the driver you are debugging.
	92
	93	config TKIP_DEBUG
	94	bool "TKIP debugging"
	95	depends on MAC80211_DEBUG
	96
	97	config MAC80211_DEBUG_COUNTERS
	98	bool "Extra statistics for TX/RX debugging"
	99	depends on MAC80211_DEBUG
	100
	101	config MAC80211_IBSS_DEBUG
	102	bool "Support for IBSS testing"
	103	depends on MAC80211_DEBUG
	104	---help---
	105	Say Y here if you intend to debug the IBSS code.
	106
	107	config MAC80211_VERBOSE_PS_DEBUG
	108	bool "Verbose powersave mode debugging"
	109	depends on MAC80211_DEBUG
	110	---help---
	111	Say Y here to print out verbose powersave
	112	mode debug messages.