ethtool: provide message mask with DEBUG_GET request
[linux-block.git] / include / uapi / linux / virtio_net.h
CommitLineData
678ece30
MR
1#ifndef _UAPI_LINUX_VIRTIO_NET_H
2#define _UAPI_LINUX_VIRTIO_NET_H
674bfc23 3/* This header is BSD licensed so anyone can use the definitions to implement
a1b38387
RR
4 * compatible drivers/servers.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. Neither the name of IBM nor the names of its contributors
15 * may be used to endorse or promote products derived from this software
16 * without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE. */
9a0e0ac2 28#include <linux/types.h>
e95646c3 29#include <linux/virtio_ids.h>
296f96fc 30#include <linux/virtio_config.h>
fdd819b2 31#include <linux/virtio_types.h>
c047fcd2 32#include <linux/if_ether.h>
296f96fc 33
a586d4f6 34/* The feature bitmap for virtio net */
5539ae96
RR
35#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
36#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
8b0a9d42 37#define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Dynamic offload configuration. */
7d84e37e 38#define VIRTIO_NET_F_MTU 3 /* Initial MTU advice */
34a48579 39#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
5539ae96
RR
40#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
41#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
42#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
43#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
44#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
45#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
46#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
47#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
3f2c31d9 48#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
9f4d26d0 49#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
2a41f71d 50#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
2af7698e 51#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
0bde9569 52#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
e79f07e2 53#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
586d17c5
JW
54#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the
55 * network */
986a4f4d
JW
56#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
57 * Steering */
7e58d5ae 58#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
9f4d26d0 59
9805069d
SS
60#define VIRTIO_NET_F_STANDBY 62 /* Act as standby for another device
61 * with the same MAC.
62 */
faa9b39f
JB
63#define VIRTIO_NET_F_SPEED_DUPLEX 63 /* Device set linkspeed and duplex */
64
ed9ecb04
RR
65#ifndef VIRTIO_NET_NO_LEGACY
66#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */
67#endif /* VIRTIO_NET_NO_LEGACY */
68
9f4d26d0 69#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
586d17c5 70#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
296f96fc 71
1842f23c 72struct virtio_net_config {
a586d4f6 73 /* The config defining mac address (if VIRTIO_NET_F_MAC) */
e216975a 74 __u8 mac[ETH_ALEN];
9f4d26d0
MM
75 /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
76 __u16 status;
986a4f4d
JW
77 /* Maximum number of each of transmit and receive queues;
78 * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ.
79 * Legal values are between 1 and 0x8000
80 */
81 __u16 max_virtqueue_pairs;
14de9d11
AC
82 /* Default maximum transmit unit advice */
83 __u16 mtu;
faa9b39f
JB
84 /*
85 * speed, in units of 1Mb. All values 0 to INT_MAX are legal.
86 * Any other value stands for unknown.
87 */
88 __u32 speed;
89 /*
90 * 0x00 - half duplex
91 * 0x01 - full duplex
92 * Any other value stands for unknown.
93 */
94 __u8 duplex;
a586d4f6 95} __attribute__((packed));
296f96fc 96
ed9ecb04
RR
97/*
98 * This header comes first in the scatter-gather list. If you don't
99 * specify GSO or CSUM features, you can simply ignore the header.
100 *
e68c48f9
RR
101 * This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf,
102 * only flattened.
ed9ecb04
RR
103 */
104struct virtio_net_hdr_v1 {
105#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */
106#define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */
107 __u8 flags;
108#define VIRTIO_NET_HDR_GSO_NONE 0 /* Not a GSO frame */
109#define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */
110#define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */
111#define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */
112#define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */
113 __u8 gso_type;
114 __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
115 __virtio16 gso_size; /* Bytes to append to hdr_len per frame */
116 __virtio16 csum_start; /* Position to start checksumming from */
117 __virtio16 csum_offset; /* Offset after that to place checksum */
118 __virtio16 num_buffers; /* Number of merged rx buffers */
119};
e68c48f9
RR
120
121#ifndef VIRTIO_NET_NO_LEGACY
122/* This header comes first in the scatter-gather list.
123 * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must
124 * be the first element of the scatter-gather list. If you don't
125 * specify GSO or CSUM features, you can simply ignore the header. */
126struct virtio_net_hdr {
127 /* See VIRTIO_NET_HDR_F_* */
128 __u8 flags;
129 /* See VIRTIO_NET_HDR_GSO_* */
130 __u8 gso_type;
131 __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
132 __virtio16 gso_size; /* Bytes to append to hdr_len per frame */
133 __virtio16 csum_start; /* Position to start checksumming from */
134 __virtio16 csum_offset; /* Offset after that to place checksum */
135};
136
137/* This is the version of the header to use when the MRG_RXBUF
138 * feature has been negotiated. */
139struct virtio_net_hdr_mrg_rxbuf {
140 struct virtio_net_hdr hdr;
141 __virtio16 num_buffers; /* Number of merged rx buffers */
142};
ed9ecb04 143#endif /* ...VIRTIO_NET_NO_LEGACY */
3f2c31d9 144
2a41f71d
AW
145/*
146 * Control virtqueue data structures
147 *
148 * The control virtqueue expects a header in the first sg entry
149 * and an ack/status response in the last entry. Data for the
150 * command goes in between.
151 */
152struct virtio_net_ctrl_hdr {
153 __u8 class;
154 __u8 cmd;
155} __attribute__((packed));
156
157typedef __u8 virtio_net_ctrl_ack;
158
159#define VIRTIO_NET_OK 0
160#define VIRTIO_NET_ERR 1
161
2af7698e 162/*
e79f07e2
AW
163 * Control the RX mode, ie. promisucous, allmulti, etc...
164 * All commands require an "out" sg entry containing a 1 byte
165 * state value, zero = disable, non-zero = enable. Commands
166 * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
167 * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
2af7698e
AW
168 */
169#define VIRTIO_NET_CTRL_RX 0
170 #define VIRTIO_NET_CTRL_RX_PROMISC 0
171 #define VIRTIO_NET_CTRL_RX_ALLMULTI 1
e79f07e2
AW
172 #define VIRTIO_NET_CTRL_RX_ALLUNI 2
173 #define VIRTIO_NET_CTRL_RX_NOMULTI 3
174 #define VIRTIO_NET_CTRL_RX_NOUNI 4
175 #define VIRTIO_NET_CTRL_RX_NOBCAST 5
2af7698e 176
f565a7c2 177/*
7e58d5ae 178 * Control the MAC
f565a7c2
AW
179 *
180 * The MAC filter table is managed by the hypervisor, the guest should
181 * assume the size is infinite. Filtering should be considered
182 * non-perfect, ie. based on hypervisor resources, the guest may
183 * received packets from sources not specified in the filter list.
184 *
185 * In addition to the class/cmd header, the TABLE_SET command requires
186 * two out scatterlists. Each contains a 4 byte count of entries followed
187 * by a concatenated byte stream of the ETH_ALEN MAC addresses. The
188 * first sg list contains unicast addresses, the second is for multicast.
189 * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
190 * is available.
7e58d5ae
AK
191 *
192 * The ADDR_SET command requests one out scatterlist, it contains a
193 * 6 bytes MAC address. This functionality is present if the
194 * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
f565a7c2
AW
195 */
196struct virtio_net_ctrl_mac {
fdd819b2 197 __virtio32 entries;
f565a7c2
AW
198 __u8 macs[][ETH_ALEN];
199} __attribute__((packed));
200
201#define VIRTIO_NET_CTRL_MAC 1
202 #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
7e58d5ae 203 #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
f565a7c2 204
0bde9569
AW
205/*
206 * Control VLAN filtering
207 *
208 * The VLAN filter table is controlled via a simple ADD/DEL interface.
209 * VLAN IDs not added may be filterd by the hypervisor. Del is the
210 * opposite of add. Both commands expect an out entry containing a 2
211 * byte VLAN ID. VLAN filterting is available with the
212 * VIRTIO_NET_F_CTRL_VLAN feature bit.
213 */
214#define VIRTIO_NET_CTRL_VLAN 2
215 #define VIRTIO_NET_CTRL_VLAN_ADD 0
216 #define VIRTIO_NET_CTRL_VLAN_DEL 1
217
586d17c5
JW
218/*
219 * Control link announce acknowledgement
220 *
221 * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
222 * driver has recevied the notification; device would clear the
223 * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
224 * this command.
225 */
226#define VIRTIO_NET_CTRL_ANNOUNCE 3
227 #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
228
986a4f4d
JW
229/*
230 * Control Receive Flow Steering
231 *
232 * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
233 * enables Receive Flow Steering, specifying the number of the transmit and
234 * receive queues that will be used. After the command is consumed and acked by
235 * the device, the device will not steer new packets on receive virtqueues
236 * other than specified nor read from transmit virtqueues other than specified.
237 * Accordingly, driver should not transmit new packets on virtqueues other than
238 * specified.
239 */
240struct virtio_net_ctrl_mq {
fdd819b2 241 __virtio16 virtqueue_pairs;
986a4f4d
JW
242};
243
244#define VIRTIO_NET_CTRL_MQ 4
245 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
246 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
247 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
248
8b0a9d42
MT
249/*
250 * Control network offloads
251 *
252 * Reconfigures the network offloads that Guest can handle.
253 *
254 * Available with the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature bit.
255 *
256 * Command data format matches the feature bit mask exactly.
257 *
258 * See VIRTIO_NET_F_GUEST_* for the list of offloads
259 * that can be enabled/disabled.
260 */
261#define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5
262#define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0
263
678ece30 264#endif /* _UAPI_LINUX_VIRTIO_NET_H */