Commit | Line | Data |
---|---|---|
6f52b16c | 1 | /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
b7be7557 AL |
2 | /* |
3 | * lirc.h - linux infrared remote control header file | |
4 | * last modified 2010/07/13 by Jarod Wilson | |
5 | */ | |
6 | ||
7 | #ifndef _LINUX_LIRC_H | |
8 | #define _LINUX_LIRC_H | |
9 | ||
10 | #include <linux/types.h> | |
11 | #include <linux/ioctl.h> | |
12 | ||
13 | #define PULSE_BIT 0x01000000 | |
14 | #define PULSE_MASK 0x00FFFFFF | |
15 | ||
16 | #define LIRC_MODE2_SPACE 0x00000000 | |
17 | #define LIRC_MODE2_PULSE 0x01000000 | |
18 | #define LIRC_MODE2_FREQUENCY 0x02000000 | |
19 | #define LIRC_MODE2_TIMEOUT 0x03000000 | |
20 | ||
21 | #define LIRC_VALUE_MASK 0x00FFFFFF | |
22 | #define LIRC_MODE2_MASK 0xFF000000 | |
23 | ||
24 | #define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) | |
25 | #define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) | |
26 | #define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) | |
27 | #define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) | |
28 | ||
29 | #define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) | |
30 | #define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) | |
31 | ||
32 | #define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) | |
33 | #define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) | |
34 | #define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) | |
35 | #define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) | |
36 | ||
37 | /* used heavily by lirc userspace */ | |
38 | #define lirc_t int | |
39 | ||
40 | /*** lirc compatible hardware features ***/ | |
41 | ||
42 | #define LIRC_MODE2SEND(x) (x) | |
43 | #define LIRC_SEND2MODE(x) (x) | |
44 | #define LIRC_MODE2REC(x) ((x) << 16) | |
45 | #define LIRC_REC2MODE(x) ((x) >> 16) | |
46 | ||
47 | #define LIRC_MODE_RAW 0x00000001 | |
48 | #define LIRC_MODE_PULSE 0x00000002 | |
49 | #define LIRC_MODE_MODE2 0x00000004 | |
9b619258 | 50 | #define LIRC_MODE_SCANCODE 0x00000008 |
b7be7557 AL |
51 | #define LIRC_MODE_LIRCCODE 0x00000010 |
52 | ||
53 | ||
54 | #define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) | |
55 | #define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) | |
56 | #define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) | |
57 | #define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) | |
58 | ||
59 | #define LIRC_CAN_SEND_MASK 0x0000003f | |
60 | ||
61 | #define LIRC_CAN_SET_SEND_CARRIER 0x00000100 | |
62 | #define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 | |
63 | #define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 | |
64 | ||
65 | #define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) | |
66 | #define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) | |
67 | #define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) | |
9b619258 | 68 | #define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE) |
b7be7557 AL |
69 | #define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) |
70 | ||
71 | #define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) | |
72 | ||
73 | #define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) | |
74 | #define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) | |
75 | ||
76 | #define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 | |
77 | #define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 | |
78 | #define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 | |
79 | #define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 | |
80 | #define LIRC_CAN_SET_REC_FILTER 0x08000000 | |
81 | ||
82 | #define LIRC_CAN_MEASURE_CARRIER 0x02000000 | |
83 | #define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 | |
84 | ||
85 | #define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) | |
86 | #define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) | |
87 | ||
88 | #define LIRC_CAN_NOTIFY_DECODE 0x01000000 | |
89 | ||
90 | /*** IOCTL commands for lirc driver ***/ | |
91 | ||
92 | #define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) | |
93 | ||
94 | #define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) | |
95 | #define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) | |
b7be7557 AL |
96 | #define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) |
97 | ||
98 | #define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) | |
99 | #define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) | |
100 | ||
b7be7557 AL |
101 | /* code length in bits, currently only for LIRC_MODE_LIRCCODE */ |
102 | #define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) | |
103 | ||
104 | #define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) | |
105 | #define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) | |
106 | /* Note: these can reset the according pulse_width */ | |
107 | #define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) | |
108 | #define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) | |
109 | #define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) | |
b7be7557 AL |
110 | #define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) |
111 | ||
112 | /* | |
113 | * when a timeout != 0 is set the driver will send a | |
114 | * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is | |
115 | * never sent, timeout is disabled by default | |
116 | */ | |
117 | #define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) | |
118 | ||
119 | /* 1 enables, 0 disables timeout reports in MODE2 */ | |
120 | #define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) | |
121 | ||
b7be7557 AL |
122 | /* |
123 | * if enabled from the next key press on the driver will send | |
124 | * LIRC_MODE2_FREQUENCY packets | |
125 | */ | |
126 | #define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) | |
127 | ||
128 | /* | |
d55f09ab MCC |
129 | * to set a range use LIRC_SET_REC_CARRIER_RANGE with the |
130 | * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound | |
b7be7557 | 131 | */ |
b7be7557 AL |
132 | #define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) |
133 | ||
b7be7557 AL |
134 | #define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) |
135 | ||
95d1544e SY |
136 | /* |
137 | * Return the recording timeout, which is either set by | |
138 | * the ioctl LIRC_SET_REC_TIMEOUT or by the kernel after setting the protocols. | |
139 | */ | |
140 | #define LIRC_GET_REC_TIMEOUT _IOR('i', 0x00000024, __u32) | |
141 | ||
9b619258 SY |
142 | /* |
143 | * struct lirc_scancode - decoded scancode with protocol for use with | |
144 | * LIRC_MODE_SCANCODE | |
145 | * | |
146 | * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR | |
147 | * was decoded. | |
148 | * @flags: should be 0 for transmit. When receiving scancodes, | |
149 | * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set | |
150 | * depending on the protocol | |
151 | * @rc_proto: see enum rc_proto | |
152 | * @keycode: the translated keycode. Set to 0 for transmit. | |
153 | * @scancode: the scancode received or to be sent | |
154 | */ | |
155 | struct lirc_scancode { | |
156 | __u64 timestamp; | |
157 | __u16 flags; | |
158 | __u16 rc_proto; | |
159 | __u32 keycode; | |
160 | __u64 scancode; | |
161 | }; | |
162 | ||
163 | /* Set if the toggle bit of rc-5 or rc-6 is enabled */ | |
164 | #define LIRC_SCANCODE_FLAG_TOGGLE 1 | |
165 | /* Set if this is a nec or sanyo repeat */ | |
166 | #define LIRC_SCANCODE_FLAG_REPEAT 2 | |
167 | ||
168 | /** | |
169 | * enum rc_proto - the Remote Controller protocol | |
170 | * | |
171 | * @RC_PROTO_UNKNOWN: Protocol not known | |
172 | * @RC_PROTO_OTHER: Protocol known but proprietary | |
173 | * @RC_PROTO_RC5: Philips RC5 protocol | |
174 | * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol | |
175 | * @RC_PROTO_RC5_SZ: StreamZap variant of RC5 | |
176 | * @RC_PROTO_JVC: JVC protocol | |
177 | * @RC_PROTO_SONY12: Sony 12 bit protocol | |
178 | * @RC_PROTO_SONY15: Sony 15 bit protocol | |
179 | * @RC_PROTO_SONY20: Sony 20 bit protocol | |
180 | * @RC_PROTO_NEC: NEC protocol | |
181 | * @RC_PROTO_NECX: Extended NEC protocol | |
182 | * @RC_PROTO_NEC32: NEC 32 bit protocol | |
183 | * @RC_PROTO_SANYO: Sanyo protocol | |
184 | * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard | |
185 | * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse | |
186 | * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol | |
187 | * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol | |
188 | * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol | |
189 | * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol | |
190 | * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol | |
191 | * @RC_PROTO_SHARP: Sharp protocol | |
192 | * @RC_PROTO_XMP: XMP protocol | |
193 | * @RC_PROTO_CEC: CEC protocol | |
447dcc0c | 194 | * @RC_PROTO_IMON: iMon Pad protocol |
721074b0 PL |
195 | * @RC_PROTO_RCMM12: RC-MM protocol 12 bits |
196 | * @RC_PROTO_RCMM24: RC-MM protocol 24 bits | |
197 | * @RC_PROTO_RCMM32: RC-MM protocol 32 bits | |
17287692 | 198 | * @RC_PROTO_XBOX_DVD: Xbox DVD Movie Playback Kit protocol |
9b619258 SY |
199 | */ |
200 | enum rc_proto { | |
201 | RC_PROTO_UNKNOWN = 0, | |
202 | RC_PROTO_OTHER = 1, | |
203 | RC_PROTO_RC5 = 2, | |
204 | RC_PROTO_RC5X_20 = 3, | |
205 | RC_PROTO_RC5_SZ = 4, | |
206 | RC_PROTO_JVC = 5, | |
207 | RC_PROTO_SONY12 = 6, | |
208 | RC_PROTO_SONY15 = 7, | |
209 | RC_PROTO_SONY20 = 8, | |
210 | RC_PROTO_NEC = 9, | |
211 | RC_PROTO_NECX = 10, | |
212 | RC_PROTO_NEC32 = 11, | |
213 | RC_PROTO_SANYO = 12, | |
214 | RC_PROTO_MCIR2_KBD = 13, | |
215 | RC_PROTO_MCIR2_MSE = 14, | |
216 | RC_PROTO_RC6_0 = 15, | |
217 | RC_PROTO_RC6_6A_20 = 16, | |
218 | RC_PROTO_RC6_6A_24 = 17, | |
219 | RC_PROTO_RC6_6A_32 = 18, | |
220 | RC_PROTO_RC6_MCE = 19, | |
221 | RC_PROTO_SHARP = 20, | |
222 | RC_PROTO_XMP = 21, | |
223 | RC_PROTO_CEC = 22, | |
447dcc0c | 224 | RC_PROTO_IMON = 23, |
721074b0 PL |
225 | RC_PROTO_RCMM12 = 24, |
226 | RC_PROTO_RCMM24 = 25, | |
227 | RC_PROTO_RCMM32 = 26, | |
17287692 | 228 | RC_PROTO_XBOX_DVD = 27, |
9b619258 SY |
229 | }; |
230 | ||
b7be7557 | 231 | #endif |