[linux-2.6-block.git] / include / uapi / linux / if.h

/*
 * INET		An implementation of the TCP/IP protocol suite for the LINUX
 *		operating system.  INET is implemented using the  BSD Socket
 *		interface as the means of communication with the user level.
 *
 *		Global definitions for the INET interface module.
 *
 * Version:	@(#)if.h	1.0.2	04/18/93
 *
 * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
 *		Ross Biro
 *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
 *
 *		This program is free software; you can redistribute it and/or
 *		modify it under the terms of the GNU General Public License
 *		as published by the Free Software Foundation; either version
 *		2 of the License, or (at your option) any later version.
 */
#ifndef _LINUX_IF_H
#define _LINUX_IF_H

#include <linux/types.h>		/* for "__kernel_caddr_t" et al	*/
#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
#include <linux/compiler.h>		/* for "__user" et al           */

#define	IFNAMSIZ	16
#define	IFALIASZ	256
#include <linux/hdlc/ioctl.h>

/**
 * enum net_device_flags - &struct net_device flags
 *
 * These are the &struct net_device flags, they can be set by drivers, the
 * kernel and some can be triggered by userspace. Userspace can query and
 * set these flags using userspace utilities but there is also a sysfs
 * entry available for all dev flags which can be queried and set. These flags
 * are shared for all types of net_devices. The sysfs entries are available
 * via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs
 * are annotated below, note that only a few flags can be toggled and some
 * other flags are always always preserved from the original net_device flags
 * even if you try to set them via sysfs. Flags which are always preserved
 * are kept under the flag grouping @IFF_VOLATILE. Flags which are volatile
 * are annotated below as such.
 *
 * You should have a pretty good reason to be extending these flags.
 *
 * @IFF_UP: interface is up. Can be toggled through sysfs.
 * @IFF_BROADCAST: broadcast address valid. Volatile.
 * @IFF_DEBUG: turn on debugging. Can be toggled through sysfs.
 * @IFF_LOOPBACK: is a loopback net. Volatile.
 * @IFF_POINTOPOINT: interface is has p-p link. Volatile.
 * @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs.
 *	Volatile.
 * @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile.
 * @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile.
 * @IFF_PROMISC: receive all packets. Can be toggled through sysfs.
 * @IFF_ALLMULTI: receive all multicast packets. Can be toggled through
 *	sysfs.
 * @IFF_MASTER: master of a load balancer. Volatile.
 * @IFF_SLAVE: slave of a load balancer. Volatile.
 * @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs.
 * @IFF_PORTSEL: can set media type. Can be toggled through sysfs.
 * @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs.
 * @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled
 *	through sysfs.
 * @IFF_LOWER_UP: driver signals L1 up. Volatile.
 * @IFF_DORMANT: driver signals dormant. Volatile.
 * @IFF_ECHO: echo sent packets. Volatile.
 */
enum net_device_flags {
	IFF_UP				= 1<<0,  /* sysfs */
	IFF_BROADCAST			= 1<<1,  /* volatile */
	IFF_DEBUG			= 1<<2,  /* sysfs */
	IFF_LOOPBACK			= 1<<3,  /* volatile */
	IFF_POINTOPOINT			= 1<<4,  /* volatile */
	IFF_NOTRAILERS			= 1<<5,  /* sysfs */
	IFF_RUNNING			= 1<<6,  /* volatile */
	IFF_NOARP			= 1<<7,  /* sysfs */
	IFF_PROMISC			= 1<<8,  /* sysfs */
	IFF_ALLMULTI			= 1<<9,  /* sysfs */
	IFF_MASTER			= 1<<10, /* volatile */
	IFF_SLAVE			= 1<<11, /* volatile */
	IFF_MULTICAST			= 1<<12, /* sysfs */
	IFF_PORTSEL			= 1<<13, /* sysfs */
	IFF_AUTOMEDIA			= 1<<14, /* sysfs */
	IFF_DYNAMIC			= 1<<15, /* sysfs */
	IFF_LOWER_UP			= 1<<16, /* volatile */
	IFF_DORMANT			= 1<<17, /* volatile */
	IFF_ECHO			= 1<<18, /* volatile */
};

#define IFF_UP				IFF_UP
#define IFF_BROADCAST			IFF_BROADCAST
#define IFF_DEBUG			IFF_DEBUG
#define IFF_LOOPBACK			IFF_LOOPBACK
#define IFF_POINTOPOINT			IFF_POINTOPOINT
#define IFF_NOTRAILERS			IFF_NOTRAILERS
#define IFF_RUNNING			IFF_RUNNING
#define IFF_NOARP			IFF_NOARP
#define IFF_PROMISC			IFF_PROMISC
#define IFF_ALLMULTI			IFF_ALLMULTI
#define IFF_MASTER			IFF_MASTER
#define IFF_SLAVE			IFF_SLAVE
#define IFF_MULTICAST			IFF_MULTICAST
#define IFF_PORTSEL			IFF_PORTSEL
#define IFF_AUTOMEDIA			IFF_AUTOMEDIA
#define IFF_DYNAMIC			IFF_DYNAMIC
#define IFF_LOWER_UP			IFF_LOWER_UP
#define IFF_DORMANT			IFF_DORMANT
#define IFF_ECHO			IFF_ECHO

#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
		IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)

#define IF_GET_IFACE	0x0001		/* for querying only */
#define IF_GET_PROTO	0x0002

/* For definitions see hdlc.h */
#define IF_IFACE_V35	0x1000		/* V.35 serial interface	*/
#define IF_IFACE_V24	0x1001		/* V.24 serial interface	*/
#define IF_IFACE_X21	0x1002		/* X.21 serial interface	*/
#define IF_IFACE_T1	0x1003		/* T1 telco serial interface	*/
#define IF_IFACE_E1	0x1004		/* E1 telco serial interface	*/
#define IF_IFACE_SYNC_SERIAL 0x1005	/* can't be set by software	*/
#define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */

/* For definitions see hdlc.h */
#define IF_PROTO_HDLC	0x2000		/* raw HDLC protocol		*/
#define IF_PROTO_PPP	0x2001		/* PPP protocol			*/
#define IF_PROTO_CISCO	0x2002		/* Cisco HDLC protocol		*/
#define IF_PROTO_FR	0x2003		/* Frame Relay protocol		*/
#define IF_PROTO_FR_ADD_PVC 0x2004	/*    Create FR PVC		*/
#define IF_PROTO_FR_DEL_PVC 0x2005	/*    Delete FR PVC		*/
#define IF_PROTO_X25	0x2006		/* X.25				*/
#define IF_PROTO_HDLC_ETH 0x2007	/* raw HDLC, Ethernet emulation	*/
#define IF_PROTO_FR_ADD_ETH_PVC 0x2008	/*  Create FR Ethernet-bridged PVC */
#define IF_PROTO_FR_DEL_ETH_PVC 0x2009	/*  Delete FR Ethernet-bridged PVC */
#define IF_PROTO_FR_PVC	0x200A		/* for reading PVC status	*/
#define IF_PROTO_FR_ETH_PVC 0x200B
#define IF_PROTO_RAW    0x200C          /* RAW Socket                   */

/* RFC 2863 operational status */
enum {
	IF_OPER_UNKNOWN,
	IF_OPER_NOTPRESENT,
	IF_OPER_DOWN,
	IF_OPER_LOWERLAYERDOWN,
	IF_OPER_TESTING,
	IF_OPER_DORMANT,
	IF_OPER_UP,
};

/* link modes */
enum {
	IF_LINK_MODE_DEFAULT,
	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */
};

/*
 *	Device mapping structure. I'd just gone off and designed a 
 *	beautiful scheme using only loadable modules with arguments
 *	for driver options and along come the PCMCIA people 8)
 *
 *	Ah well. The get() side of this is good for WDSETUP, and it'll
 *	be handy for debugging things. The set side is fine for now and
 *	being very small might be worth keeping for clean configuration.
 */

struct ifmap {
	unsigned long mem_start;
	unsigned long mem_end;
	unsigned short base_addr; 
	unsigned char irq;
	unsigned char dma;
	unsigned char port;
	/* 3 bytes spare */
};

struct if_settings {
	unsigned int type;	/* Type of physical device or protocol */
	unsigned int size;	/* Size of the data allocated by the caller */
	union {
		/* {atm/eth/dsl}_settings anyone ? */
		raw_hdlc_proto		__user *raw_hdlc;
		cisco_proto		__user *cisco;
		fr_proto		__user *fr;
		fr_proto_pvc		__user *fr_pvc;
		fr_proto_pvc_info	__user *fr_pvc_info;

		/* interface settings */
		sync_serial_settings	__user *sync;
		te1_settings		__user *te1;
	} ifs_ifsu;
};

/*
 * Interface request structure used for socket
 * ioctl's.  All interface ioctl's must have parameter
 * definitions which begin with ifr_name.  The
 * remainder may be interface specific.
 */

struct ifreq {
#define IFHWADDRLEN	6
	union
	{
		char	ifrn_name[IFNAMSIZ];		/* if name, e.g. "en0" */
	} ifr_ifrn;
	
	union {
		struct	sockaddr ifru_addr;
		struct	sockaddr ifru_dstaddr;
		struct	sockaddr ifru_broadaddr;
		struct	sockaddr ifru_netmask;
		struct  sockaddr ifru_hwaddr;
		short	ifru_flags;
		int	ifru_ivalue;
		int	ifru_mtu;
		struct  ifmap ifru_map;
		char	ifru_slave[IFNAMSIZ];	/* Just fits the size */
		char	ifru_newname[IFNAMSIZ];
		void __user *	ifru_data;
		struct	if_settings ifru_settings;
	} ifr_ifru;
};

#define ifr_name	ifr_ifrn.ifrn_name	/* interface name 	*/
#define ifr_hwaddr	ifr_ifru.ifru_hwaddr	/* MAC address 		*/
#define	ifr_addr	ifr_ifru.ifru_addr	/* address		*/
#define	ifr_dstaddr	ifr_ifru.ifru_dstaddr	/* other end of p-p lnk	*/
#define	ifr_broadaddr	ifr_ifru.ifru_broadaddr	/* broadcast address	*/
#define	ifr_netmask	ifr_ifru.ifru_netmask	/* interface net mask	*/
#define	ifr_flags	ifr_ifru.ifru_flags	/* flags		*/
#define	ifr_metric	ifr_ifru.ifru_ivalue	/* metric		*/
#define	ifr_mtu		ifr_ifru.ifru_mtu	/* mtu			*/
#define ifr_map		ifr_ifru.ifru_map	/* device map		*/
#define ifr_slave	ifr_ifru.ifru_slave	/* slave device		*/
#define	ifr_data	ifr_ifru.ifru_data	/* for use by interface	*/
#define ifr_ifindex	ifr_ifru.ifru_ivalue	/* interface index	*/
#define ifr_bandwidth	ifr_ifru.ifru_ivalue    /* link bandwidth	*/
#define ifr_qlen	ifr_ifru.ifru_ivalue	/* Queue length 	*/
#define ifr_newname	ifr_ifru.ifru_newname	/* New name		*/
#define ifr_settings	ifr_ifru.ifru_settings	/* Device/proto settings*/

/*
 * Structure used in SIOCGIFCONF request.
 * Used to retrieve interface configuration
 * for machine (useful for programs which
 * must know all networks accessible).
 */

struct ifconf  {
	int	ifc_len;			/* size of buffer	*/
	union {
		char __user *ifcu_buf;
		struct ifreq __user *ifcu_req;
	} ifc_ifcu;
};
#define	ifc_buf	ifc_ifcu.ifcu_buf		/* buffer address	*/
#define	ifc_req	ifc_ifcu.ifcu_req		/* array of structures	*/

#endif /* _LINUX_IF_H */
Commit	Line	Data
1da177e4 LT	1	/*
	2	* INET An implementation of the TCP/IP protocol suite for the LINUX
	3	* operating system. INET is implemented using the BSD Socket
	4	* interface as the means of communication with the user level.
	5	*
	6	* Global definitions for the INET interface module.
	7	*
	8	* Version: @(#)if.h 1.0.2 04/18/93
	9	*
	10	* Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
02c30a84	11	* Ross Biro
1da177e4 LT	12	* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
	13	*
	14	* This program is free software; you can redistribute it and/or
	15	* modify it under the terms of the GNU General Public License
	16	* as published by the Free Software Foundation; either version
	17	* 2 of the License, or (at your option) any later version.
	18	*/
	19	#ifndef _LINUX_IF_H
	20	#define _LINUX_IF_H
	21
	22	#include <linux/types.h> /* for "__kernel_caddr_t" et al */
	23	#include <linux/socket.h> /* for "struct sockaddr" et al */
	24	#include <linux/compiler.h> /* for "__user" et al */
	25
	26	#define IFNAMSIZ 16
0b815a1a	27	#define IFALIASZ 256
1da177e4 LT	28	#include <linux/hdlc/ioctl.h>
1da177e4 LT	29
589f5816 LR	30	/**
	31	* enum net_device_flags - &struct net_device flags
	32	*
	33	* These are the &struct net_device flags, they can be set by drivers, the
	34	* kernel and some can be triggered by userspace. Userspace can query and
	35	* set these flags using userspace utilities but there is also a sysfs
	36	* entry available for all dev flags which can be queried and set. These flags
	37	* are shared for all types of net_devices. The sysfs entries are available
	38	* via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs
	39	* are annotated below, note that only a few flags can be toggled and some
	40	* other flags are always always preserved from the original net_device flags
	41	* even if you try to set them via sysfs. Flags which are always preserved
	42	* are kept under the flag grouping @IFF_VOLATILE. Flags which are volatile
	43	* are annotated below as such.
	44	*
	45	* You should have a pretty good reason to be extending these flags.
	46	*
	47	* @IFF_UP: interface is up. Can be toggled through sysfs.
	48	* @IFF_BROADCAST: broadcast address valid. Volatile.
	49	* @IFF_DEBUG: turn on debugging. Can be toggled through sysfs.
	50	* @IFF_LOOPBACK: is a loopback net. Volatile.
	51	* @IFF_POINTOPOINT: interface is has p-p link. Volatile.
	52	* @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs.
	53	* Volatile.
	54	* @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile.
	55	* @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile.
	56	* @IFF_PROMISC: receive all packets. Can be toggled through sysfs.
	57	* @IFF_ALLMULTI: receive all multicast packets. Can be toggled through
	58	* sysfs.
	59	* @IFF_MASTER: master of a load balancer. Volatile.
	60	* @IFF_SLAVE: slave of a load balancer. Volatile.
	61	* @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs.
	62	* @IFF_PORTSEL: can set media type. Can be toggled through sysfs.
	63	* @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs.
	64	* @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled
	65	* through sysfs.
	66	* @IFF_LOWER_UP: driver signals L1 up. Volatile.
	67	* @IFF_DORMANT: driver signals dormant. Volatile.
	68	* @IFF_ECHO: echo sent packets. Volatile.
	69	*/
	70	enum net_device_flags {
	71	IFF_UP = 1<<0, /* sysfs */
	72	IFF_BROADCAST = 1<<1, /* volatile */
	73	IFF_DEBUG = 1<<2, /* sysfs */
	74	IFF_LOOPBACK = 1<<3, /* volatile */
	75	IFF_POINTOPOINT = 1<<4, /* volatile */
	76	IFF_NOTRAILERS = 1<<5, /* sysfs */
	77	IFF_RUNNING = 1<<6, /* volatile */
	78	IFF_NOARP = 1<<7, /* sysfs */
	79	IFF_PROMISC = 1<<8, /* sysfs */
	80	IFF_ALLMULTI = 1<<9, /* sysfs */
	81	IFF_MASTER = 1<<10, /* volatile */
	82	IFF_SLAVE = 1<<11, /* volatile */
	83	IFF_MULTICAST = 1<<12, /* sysfs */
	84	IFF_PORTSEL = 1<<13, /* sysfs */
	85	IFF_AUTOMEDIA = 1<<14, /* sysfs */
	86	IFF_DYNAMIC = 1<<15, /* sysfs */
	87	IFF_LOWER_UP = 1<<16, /* volatile */
	88	IFF_DORMANT = 1<<17, /* volatile */
	89	IFF_ECHO = 1<<18, /* volatile */
	90	};
b00055aa	91
589f5816 LR	92	#define IFF_UP IFF_UP
	93	#define IFF_BROADCAST IFF_BROADCAST
	94	#define IFF_DEBUG IFF_DEBUG
	95	#define IFF_LOOPBACK IFF_LOOPBACK
	96	#define IFF_POINTOPOINT IFF_POINTOPOINT
	97	#define IFF_NOTRAILERS IFF_NOTRAILERS
	98	#define IFF_RUNNING IFF_RUNNING
	99	#define IFF_NOARP IFF_NOARP
	100	#define IFF_PROMISC IFF_PROMISC
	101	#define IFF_ALLMULTI IFF_ALLMULTI
	102	#define IFF_MASTER IFF_MASTER
	103	#define IFF_SLAVE IFF_SLAVE
	104	#define IFF_MULTICAST IFF_MULTICAST
	105	#define IFF_PORTSEL IFF_PORTSEL
	106	#define IFF_AUTOMEDIA IFF_AUTOMEDIA
	107	#define IFF_DYNAMIC IFF_DYNAMIC
	108	#define IFF_LOWER_UP IFF_LOWER_UP
	109	#define IFF_DORMANT IFF_DORMANT
	110	#define IFF_ECHO IFF_ECHO
cd05acfe OH	111
cd05acfe OH	112	#define IFF_VOLATILE (IFF_LOOPBACK\|IFF_POINTOPOINT\|IFF_BROADCAST\|IFF_ECHO\|\
b00055aa SR	113	IFF_MASTER\|IFF_SLAVE\|IFF_RUNNING\|IFF_LOWER_UP\|IFF_DORMANT)
b00055aa SR	114
1da177e4 LT	115	#define IF_GET_IFACE 0x0001 /* for querying only */
	116	#define IF_GET_PROTO 0x0002
	117
	118	/* For definitions see hdlc.h */
	119	#define IF_IFACE_V35 0x1000 /* V.35 serial interface */
	120	#define IF_IFACE_V24 0x1001 /* V.24 serial interface */
	121	#define IF_IFACE_X21 0x1002 /* X.21 serial interface */
	122	#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */
	123	#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */
	124	#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */
	125	#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */
	126
	127	/* For definitions see hdlc.h */
	128	#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */
	129	#define IF_PROTO_PPP 0x2001 /* PPP protocol */
	130	#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */
	131	#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */
	132	#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */
	133	#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */
	134	#define IF_PROTO_X25 0x2006 /* X.25 */
	135	#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */
	136	#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */
	137	#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */
	138	#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */
	139	#define IF_PROTO_FR_ETH_PVC 0x200B
	140	#define IF_PROTO_RAW 0x200C /* RAW Socket */
	141
b00055aa SR	142	/* RFC 2863 operational status */
	143	enum {
	144	IF_OPER_UNKNOWN,
	145	IF_OPER_NOTPRESENT,
	146	IF_OPER_DOWN,
	147	IF_OPER_LOWERLAYERDOWN,
	148	IF_OPER_TESTING,
	149	IF_OPER_DORMANT,
	150	IF_OPER_UP,
	151	};
	152
	153	/* link modes */
	154	enum {
	155	IF_LINK_MODE_DEFAULT,
	156	IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */
	157	};
1da177e4 LT	158
	159	/*
	160	* Device mapping structure. I'd just gone off and designed a
	161	* beautiful scheme using only loadable modules with arguments
	162	* for driver options and along come the PCMCIA people 8)
	163	*
	164	* Ah well. The get() side of this is good for WDSETUP, and it'll
	165	* be handy for debugging things. The set side is fine for now and
	166	* being very small might be worth keeping for clean configuration.
	167	*/
	168
d94d9fee	169	struct ifmap {
1da177e4 LT	170	unsigned long mem_start;
	171	unsigned long mem_end;
	172	unsigned short base_addr;
	173	unsigned char irq;
	174	unsigned char dma;
	175	unsigned char port;
	176	/* 3 bytes spare */
	177	};
	178
d94d9fee	179	struct if_settings {
1da177e4 LT	180	unsigned int type; /* Type of physical device or protocol */
	181	unsigned int size; /* Size of the data allocated by the caller */
	182	union {
	183	/* {atm/eth/dsl}_settings anyone ? */
	184	raw_hdlc_proto __user *raw_hdlc;
	185	cisco_proto __user *cisco;
	186	fr_proto __user *fr;
	187	fr_proto_pvc __user *fr_pvc;
	188	fr_proto_pvc_info __user *fr_pvc_info;
	189
	190	/* interface settings */
	191	sync_serial_settings __user *sync;
	192	te1_settings __user *te1;
	193	} ifs_ifsu;
	194	};
	195
	196	/*
	197	* Interface request structure used for socket
	198	* ioctl's. All interface ioctl's must have parameter
	199	* definitions which begin with ifr_name. The
	200	* remainder may be interface specific.
	201	*/
	202
d94d9fee	203	struct ifreq {
1da177e4 LT	204	#define IFHWADDRLEN 6
	205	union
	206	{
	207	char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */
	208	} ifr_ifrn;
	209
	210	union {
	211	struct sockaddr ifru_addr;
	212	struct sockaddr ifru_dstaddr;
	213	struct sockaddr ifru_broadaddr;
	214	struct sockaddr ifru_netmask;
	215	struct sockaddr ifru_hwaddr;
	216	short ifru_flags;
	217	int ifru_ivalue;
	218	int ifru_mtu;
	219	struct ifmap ifru_map;
	220	char ifru_slave[IFNAMSIZ]; /* Just fits the size */
	221	char ifru_newname[IFNAMSIZ];
	222	void __user * ifru_data;
	223	struct if_settings ifru_settings;
	224	} ifr_ifru;
	225	};
	226
	227	#define ifr_name ifr_ifrn.ifrn_name /* interface name */
	228	#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */
	229	#define ifr_addr ifr_ifru.ifru_addr /* address */
	230	#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */
	231	#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */
	232	#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */
	233	#define ifr_flags ifr_ifru.ifru_flags /* flags */
	234	#define ifr_metric ifr_ifru.ifru_ivalue /* metric */
	235	#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */
	236	#define ifr_map ifr_ifru.ifru_map /* device map */
	237	#define ifr_slave ifr_ifru.ifru_slave /* slave device */
	238	#define ifr_data ifr_ifru.ifru_data /* for use by interface */
	239	#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */
	240	#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */
	241	#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */
	242	#define ifr_newname ifr_ifru.ifru_newname /* New name */
	243	#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/
	244
	245	/*
	246	* Structure used in SIOCGIFCONF request.
	247	* Used to retrieve interface configuration
	248	* for machine (useful for programs which
	249	* must know all networks accessible).
	250	*/
	251
d94d9fee	252	struct ifconf {
1da177e4	253	int ifc_len; /* size of buffer */
d94d9fee	254	union {
1da177e4 LT	255	char __user *ifcu_buf;
	256	struct ifreq __user *ifcu_req;
	257	} ifc_ifcu;
	258	};
	259	#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */
	260	#define ifc_req ifc_ifcu.ifcu_req /* array of structures */
	261
1da177e4	262	#endif /* _LINUX_IF_H */