Commit | Line | Data |
---|---|---|
6f52b16c | 1 | /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ |
607ca46e DH |
2 | /* |
3 | * ethtool.h: Defines for Linux ethtool. | |
4 | * | |
5 | * Copyright (C) 1998 David S. Miller (davem@redhat.com) | |
6 | * Copyright 2001 Jeff Garzik <jgarzik@pobox.com> | |
7 | * Portions Copyright 2001 Sun Microsystems (thockin@sun.com) | |
8 | * Portions Copyright 2002 Intel (eli.kupermann@intel.com, | |
9 | * christopher.leech@intel.com, | |
10 | * scott.feldman@intel.com) | |
11 | * Portions Copyright (C) Sun Microsystems 2008 | |
12 | */ | |
13 | ||
14 | #ifndef _UAPI_LINUX_ETHTOOL_H | |
15 | #define _UAPI_LINUX_ETHTOOL_H | |
16 | ||
a85cbe61 | 17 | #include <linux/const.h> |
607ca46e DH |
18 | #include <linux/types.h> |
19 | #include <linux/if_ether.h> | |
20 | ||
14e20379 ND |
21 | #ifndef __KERNEL__ |
22 | #include <limits.h> /* for INT_MAX */ | |
23 | #endif | |
24 | ||
bf8fc60a BH |
25 | /* All structures exposed to userland should be defined such that they |
26 | * have the same layout for 32-bit and 64-bit userland. | |
27 | */ | |
28 | ||
83e5feeb JK |
29 | /* Note on reserved space. |
30 | * Reserved fields must not be accessed directly by user space because | |
31 | * they may be replaced by a different field in the future. They must | |
32 | * be initialized to zero before making the request, e.g. via memset | |
33 | * of the entire structure or implicitly by not being set in a structure | |
34 | * initializer. | |
35 | */ | |
36 | ||
bf8fc60a | 37 | /** |
3f1ac7a7 DD |
38 | * struct ethtool_cmd - DEPRECATED, link control and status |
39 | * This structure is DEPRECATED, please use struct ethtool_link_settings. | |
bf8fc60a BH |
40 | * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET |
41 | * @supported: Bitmask of %SUPPORTED_* flags for the link modes, | |
42 | * physical connectors and other link features for which the | |
43 | * interface supports autonegotiation or auto-detection. | |
44 | * Read-only. | |
45 | * @advertising: Bitmask of %ADVERTISED_* flags for the link modes, | |
46 | * physical connectors and other link features that are | |
47 | * advertised through autonegotiation or enabled for | |
48 | * auto-detection. | |
4456ed04 | 49 | * @speed: Low bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN |
bf8fc60a BH |
50 | * @duplex: Duplex mode; one of %DUPLEX_* |
51 | * @port: Physical connector type; one of %PORT_* | |
52 | * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not | |
53 | * applicable. For clause 45 PHYs this is the PRTAD. | |
54 | * @transceiver: Historically used to distinguish different possible | |
55 | * PHY types, but not in a consistent way. Deprecated. | |
56 | * @autoneg: Enable/disable autonegotiation and auto-detection; | |
57 | * either %AUTONEG_DISABLE or %AUTONEG_ENABLE | |
58 | * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO | |
59 | * protocols supported by the interface; 0 if unknown. | |
60 | * Read-only. | |
61 | * @maxtxpkt: Historically used to report TX IRQ coalescing; now | |
62 | * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. | |
63 | * @maxrxpkt: Historically used to report RX IRQ coalescing; now | |
64 | * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. | |
4456ed04 | 65 | * @speed_hi: High bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN |
bf8fc60a BH |
66 | * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of |
67 | * %ETH_TP_MDI_*. If the status is unknown or not applicable, the | |
68 | * value will be %ETH_TP_MDI_INVALID. Read-only. | |
69 | * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of | |
70 | * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads | |
71 | * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected. | |
72 | * When written successfully, the link should be renegotiated if | |
73 | * necessary. | |
74 | * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes | |
75 | * and other link features that the link partner advertised | |
76 | * through autonegotiation; 0 if unknown or not applicable. | |
77 | * Read-only. | |
83e5feeb | 78 | * @reserved: Reserved for future use; see the note on reserved space. |
bf8fc60a BH |
79 | * |
80 | * The link speed in Mbps is split between @speed and @speed_hi. Use | |
81 | * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to | |
82 | * access it. | |
83 | * | |
84 | * If autonegotiation is disabled, the speed and @duplex represent the | |
85 | * fixed link mode and are writable if the driver supports multiple | |
86 | * link modes. If it is enabled then they are read-only; if the link | |
87 | * is up they represent the negotiated link mode; if the link is down, | |
88 | * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and | |
89 | * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. | |
90 | * | |
91 | * Some hardware interfaces may have multiple PHYs and/or physical | |
92 | * connectors fitted or do not allow the driver to detect which are | |
93 | * fitted. For these interfaces @port and/or @phy_address may be | |
94 | * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE. | |
95 | * Otherwise, attempts to write different values may be ignored or | |
96 | * rejected. | |
97 | * | |
98 | * Users should assume that all fields not marked read-only are | |
99 | * writable and subject to validation by the driver. They should use | |
100 | * %ETHTOOL_GSET to get the current values before making specific | |
101 | * changes and then applying them with %ETHTOOL_SSET. | |
102 | * | |
bf8fc60a BH |
103 | * Deprecated fields should be ignored by both users and drivers. |
104 | */ | |
607ca46e DH |
105 | struct ethtool_cmd { |
106 | __u32 cmd; | |
bf8fc60a BH |
107 | __u32 supported; |
108 | __u32 advertising; | |
109 | __u16 speed; | |
110 | __u8 duplex; | |
111 | __u8 port; | |
112 | __u8 phy_address; | |
113 | __u8 transceiver; | |
114 | __u8 autoneg; | |
115 | __u8 mdio_support; | |
116 | __u32 maxtxpkt; | |
117 | __u32 maxrxpkt; | |
118 | __u16 speed_hi; | |
119 | __u8 eth_tp_mdix; | |
120 | __u8 eth_tp_mdix_ctrl; | |
121 | __u32 lp_advertising; | |
607ca46e DH |
122 | __u32 reserved[2]; |
123 | }; | |
124 | ||
125 | static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, | |
126 | __u32 speed) | |
127 | { | |
85a62440 | 128 | ep->speed = (__u16)(speed & 0xFFFF); |
607ca46e DH |
129 | ep->speed_hi = (__u16)(speed >> 16); |
130 | } | |
131 | ||
132 | static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) | |
133 | { | |
134 | return (ep->speed_hi << 16) | ep->speed; | |
135 | } | |
136 | ||
137 | /* Device supports clause 22 register access to PHY or peripherals | |
138 | * using the interface defined in <linux/mii.h>. This should not be | |
139 | * set if there are known to be no such peripherals present or if | |
140 | * the driver only emulates clause 22 registers for compatibility. | |
141 | */ | |
142 | #define ETH_MDIO_SUPPORTS_C22 1 | |
143 | ||
144 | /* Device supports clause 45 register access to PHY or peripherals | |
145 | * using the interface defined in <linux/mii.h> and <linux/mdio.h>. | |
146 | * This should not be set if there are known to be no such peripherals | |
147 | * present. | |
148 | */ | |
149 | #define ETH_MDIO_SUPPORTS_C45 2 | |
150 | ||
151 | #define ETHTOOL_FWVERS_LEN 32 | |
152 | #define ETHTOOL_BUSINFO_LEN 32 | |
a4505152 | 153 | #define ETHTOOL_EROMVERS_LEN 32 |
daba1b6b BH |
154 | |
155 | /** | |
156 | * struct ethtool_drvinfo - general driver and device information | |
157 | * @cmd: Command number = %ETHTOOL_GDRVINFO | |
158 | * @driver: Driver short name. This should normally match the name | |
159 | * in its bus driver structure (e.g. pci_driver::name). Must | |
160 | * not be an empty string. | |
161 | * @version: Driver version string; may be an empty string | |
162 | * @fw_version: Firmware version string; may be an empty string | |
a4505152 | 163 | * @erom_version: Expansion ROM version string; may be an empty string |
daba1b6b BH |
164 | * @bus_info: Device bus address. This should match the dev_name() |
165 | * string for the underlying bus device, if there is one. May be | |
166 | * an empty string. | |
83e5feeb | 167 | * @reserved2: Reserved for future use; see the note on reserved space. |
daba1b6b BH |
168 | * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and |
169 | * %ETHTOOL_SPFLAGS commands; also the number of strings in the | |
170 | * %ETH_SS_PRIV_FLAGS set | |
171 | * @n_stats: Number of u64 statistics returned by the %ETHTOOL_GSTATS | |
172 | * command; also the number of strings in the %ETH_SS_STATS set | |
173 | * @testinfo_len: Number of results returned by the %ETHTOOL_TEST | |
174 | * command; also the number of strings in the %ETH_SS_TEST set | |
175 | * @eedump_len: Size of EEPROM accessible through the %ETHTOOL_GEEPROM | |
176 | * and %ETHTOOL_SEEPROM commands, in bytes | |
177 | * @regdump_len: Size of register dump returned by the %ETHTOOL_GREGS | |
178 | * command, in bytes | |
179 | * | |
180 | * Users can use the %ETHTOOL_GSSET_INFO command to get the number of | |
181 | * strings in any string set (from Linux 2.6.34). | |
182 | * | |
183 | * Drivers should set at most @driver, @version, @fw_version and | |
184 | * @bus_info in their get_drvinfo() implementation. The ethtool | |
185 | * core fills in the other fields using other driver operations. | |
186 | */ | |
607ca46e DH |
187 | struct ethtool_drvinfo { |
188 | __u32 cmd; | |
daba1b6b BH |
189 | char driver[32]; |
190 | char version[32]; | |
191 | char fw_version[ETHTOOL_FWVERS_LEN]; | |
192 | char bus_info[ETHTOOL_BUSINFO_LEN]; | |
a4505152 | 193 | char erom_version[ETHTOOL_EROMVERS_LEN]; |
607ca46e | 194 | char reserved2[12]; |
daba1b6b BH |
195 | __u32 n_priv_flags; |
196 | __u32 n_stats; | |
607ca46e | 197 | __u32 testinfo_len; |
daba1b6b BH |
198 | __u32 eedump_len; |
199 | __u32 regdump_len; | |
607ca46e DH |
200 | }; |
201 | ||
202 | #define SOPASS_MAX 6 | |
02d59f3f BH |
203 | |
204 | /** | |
205 | * struct ethtool_wolinfo - Wake-On-Lan configuration | |
206 | * @cmd: Command number = %ETHTOOL_GWOL or %ETHTOOL_SWOL | |
207 | * @supported: Bitmask of %WAKE_* flags for supported Wake-On-Lan modes. | |
208 | * Read-only. | |
209 | * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes. | |
210 | * @sopass: SecureOn(tm) password; meaningful only if %WAKE_MAGICSECURE | |
211 | * is set in @wolopts. | |
212 | */ | |
607ca46e DH |
213 | struct ethtool_wolinfo { |
214 | __u32 cmd; | |
215 | __u32 supported; | |
216 | __u32 wolopts; | |
02d59f3f | 217 | __u8 sopass[SOPASS_MAX]; |
607ca46e DH |
218 | }; |
219 | ||
220 | /* for passing single values */ | |
221 | struct ethtool_value { | |
222 | __u32 cmd; | |
223 | __u32 data; | |
224 | }; | |
225 | ||
e1577c1c IK |
226 | #define PFC_STORM_PREVENTION_AUTO 0xffff |
227 | #define PFC_STORM_PREVENTION_DISABLE 0 | |
228 | ||
f0db9b07 GV |
229 | enum tunable_id { |
230 | ETHTOOL_ID_UNSPEC, | |
231 | ETHTOOL_RX_COPYBREAK, | |
1255a505 | 232 | ETHTOOL_TX_COPYBREAK, |
e1577c1c | 233 | ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */ |
a4244b0c | 234 | /* |
c3086637 | 235 | * Add your fresh new tunable attribute above and remember to update |
a4244b0c HHZ |
236 | * tunable_strings[] in net/core/ethtool.c |
237 | */ | |
238 | __ETHTOOL_TUNABLE_COUNT, | |
f0db9b07 GV |
239 | }; |
240 | ||
241 | enum tunable_type_id { | |
242 | ETHTOOL_TUNABLE_UNSPEC, | |
243 | ETHTOOL_TUNABLE_U8, | |
244 | ETHTOOL_TUNABLE_U16, | |
245 | ETHTOOL_TUNABLE_U32, | |
246 | ETHTOOL_TUNABLE_U64, | |
247 | ETHTOOL_TUNABLE_STRING, | |
248 | ETHTOOL_TUNABLE_S8, | |
249 | ETHTOOL_TUNABLE_S16, | |
250 | ETHTOOL_TUNABLE_S32, | |
251 | ETHTOOL_TUNABLE_S64, | |
252 | }; | |
253 | ||
254 | struct ethtool_tunable { | |
255 | __u32 cmd; | |
256 | __u32 id; | |
257 | __u32 type_id; | |
258 | __u32 len; | |
259 | void *data[0]; | |
260 | }; | |
261 | ||
607c7029 RL |
262 | #define DOWNSHIFT_DEV_DEFAULT_COUNT 0xff |
263 | #define DOWNSHIFT_DEV_DISABLE 0 | |
264 | ||
3aeb0803 HK |
265 | /* Time in msecs after which link is reported as down |
266 | * 0 = lowest time supported by the PHY | |
267 | * 0xff = off, link down detection according to standard | |
268 | */ | |
269 | #define ETHTOOL_PHY_FAST_LINK_DOWN_ON 0 | |
270 | #define ETHTOOL_PHY_FAST_LINK_DOWN_OFF 0xff | |
271 | ||
9f2f13f4 AA |
272 | /* Energy Detect Power Down (EDPD) is a feature supported by some PHYs, where |
273 | * the PHY's RX & TX blocks are put into a low-power mode when there is no | |
274 | * link detected (typically cable is un-plugged). For RX, only a minimal | |
275 | * link-detection is available, and for TX the PHY wakes up to send link pulses | |
276 | * to avoid any lock-ups in case the peer PHY may also be running in EDPD mode. | |
277 | * | |
278 | * Some PHYs may support configuration of the wake-up interval for TX pulses, | |
279 | * and some PHYs may support only disabling TX pulses entirely. For the latter | |
280 | * a special value is required (ETHTOOL_PHY_EDPD_NO_TX) so that this can be | |
281 | * configured from userspace (should the user want it). | |
282 | * | |
283 | * The interval units for TX wake-up are in milliseconds, since this should | |
284 | * cover a reasonable range of intervals: | |
285 | * - from 1 millisecond, which does not sound like much of a power-saver | |
286 | * - to ~65 seconds which is quite a lot to wait for a link to come up when | |
287 | * plugging a cable | |
288 | */ | |
289 | #define ETHTOOL_PHY_EDPD_DFLT_TX_MSECS 0xffff | |
290 | #define ETHTOOL_PHY_EDPD_NO_TX 0xfffe | |
291 | #define ETHTOOL_PHY_EDPD_DISABLE 0 | |
292 | ||
0d27f4e4 RL |
293 | enum phy_tunable_id { |
294 | ETHTOOL_PHY_ID_UNSPEC, | |
607c7029 | 295 | ETHTOOL_PHY_DOWNSHIFT, |
3aeb0803 | 296 | ETHTOOL_PHY_FAST_LINK_DOWN, |
9f2f13f4 | 297 | ETHTOOL_PHY_EDPD, |
0d27f4e4 RL |
298 | /* |
299 | * Add your fresh new phy tunable attribute above and remember to update | |
300 | * phy_tunable_strings[] in net/core/ethtool.c | |
301 | */ | |
302 | __ETHTOOL_PHY_TUNABLE_COUNT, | |
303 | }; | |
304 | ||
09fb8bb0 BH |
305 | /** |
306 | * struct ethtool_regs - hardware register dump | |
307 | * @cmd: Command number = %ETHTOOL_GREGS | |
308 | * @version: Dump format version. This is driver-specific and may | |
309 | * distinguish different chips/revisions. Drivers must use new | |
310 | * version numbers whenever the dump format changes in an | |
311 | * incompatible way. | |
312 | * @len: On entry, the real length of @data. On return, the number of | |
313 | * bytes used. | |
314 | * @data: Buffer for the register dump | |
315 | * | |
316 | * Users should use %ETHTOOL_GDRVINFO to find the maximum length of | |
317 | * a register dump for the interface. They must allocate the buffer | |
318 | * immediately following this structure. | |
319 | */ | |
607ca46e DH |
320 | struct ethtool_regs { |
321 | __u32 cmd; | |
09fb8bb0 BH |
322 | __u32 version; |
323 | __u32 len; | |
607ca46e DH |
324 | __u8 data[0]; |
325 | }; | |
326 | ||
c8364a63 BH |
327 | /** |
328 | * struct ethtool_eeprom - EEPROM dump | |
329 | * @cmd: Command number = %ETHTOOL_GEEPROM, %ETHTOOL_GMODULEEEPROM or | |
330 | * %ETHTOOL_SEEPROM | |
331 | * @magic: A 'magic cookie' value to guard against accidental changes. | |
332 | * The value passed in to %ETHTOOL_SEEPROM must match the value | |
333 | * returned by %ETHTOOL_GEEPROM for the same device. This is | |
334 | * unused when @cmd is %ETHTOOL_GMODULEEEPROM. | |
335 | * @offset: Offset within the EEPROM to begin reading/writing, in bytes | |
336 | * @len: On entry, number of bytes to read/write. On successful | |
337 | * return, number of bytes actually read/written. In case of | |
338 | * error, this may indicate at what point the error occurred. | |
339 | * @data: Buffer to read/write from | |
340 | * | |
341 | * Users may use %ETHTOOL_GDRVINFO or %ETHTOOL_GMODULEINFO to find | |
342 | * the length of an on-board or module EEPROM, respectively. They | |
343 | * must allocate the buffer immediately following this structure. | |
344 | */ | |
607ca46e DH |
345 | struct ethtool_eeprom { |
346 | __u32 cmd; | |
347 | __u32 magic; | |
c8364a63 BH |
348 | __u32 offset; |
349 | __u32 len; | |
607ca46e DH |
350 | __u8 data[0]; |
351 | }; | |
352 | ||
353 | /** | |
354 | * struct ethtool_eee - Energy Efficient Ethernet information | |
355 | * @cmd: ETHTOOL_{G,S}EEE | |
356 | * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations | |
357 | * for which there is EEE support. | |
358 | * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations | |
359 | * advertised as eee capable. | |
360 | * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex | |
361 | * combinations advertised by the link partner as eee capable. | |
362 | * @eee_active: Result of the eee auto negotiation. | |
363 | * @eee_enabled: EEE configured mode (enabled/disabled). | |
364 | * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given | |
365 | * that eee was negotiated. | |
366 | * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting | |
367 | * its tx lpi (after reaching 'idle' state). Effective only when eee | |
368 | * was negotiated and tx_lpi_enabled was set. | |
83e5feeb | 369 | * @reserved: Reserved for future use; see the note on reserved space. |
607ca46e DH |
370 | */ |
371 | struct ethtool_eee { | |
372 | __u32 cmd; | |
373 | __u32 supported; | |
374 | __u32 advertised; | |
375 | __u32 lp_advertised; | |
376 | __u32 eee_active; | |
377 | __u32 eee_enabled; | |
378 | __u32 tx_lpi_enabled; | |
379 | __u32 tx_lpi_timer; | |
380 | __u32 reserved[2]; | |
381 | }; | |
382 | ||
383 | /** | |
384 | * struct ethtool_modinfo - plugin module eeprom information | |
385 | * @cmd: %ETHTOOL_GMODULEINFO | |
386 | * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx | |
387 | * @eeprom_len: Length of the eeprom | |
83e5feeb | 388 | * @reserved: Reserved for future use; see the note on reserved space. |
607ca46e DH |
389 | * |
390 | * This structure is used to return the information to | |
391 | * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM. | |
392 | * The type code indicates the eeprom data format | |
393 | */ | |
394 | struct ethtool_modinfo { | |
395 | __u32 cmd; | |
396 | __u32 type; | |
397 | __u32 eeprom_len; | |
398 | __u32 reserved[8]; | |
399 | }; | |
400 | ||
401 | /** | |
402 | * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates | |
403 | * @cmd: ETHTOOL_{G,S}COALESCE | |
404 | * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after | |
405 | * a packet arrives. | |
406 | * @rx_max_coalesced_frames: Maximum number of packets to receive | |
407 | * before an RX interrupt. | |
408 | * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that | |
409 | * this value applies while an IRQ is being serviced by the host. | |
410 | * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames, | |
411 | * except that this value applies while an IRQ is being serviced | |
412 | * by the host. | |
413 | * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after | |
414 | * a packet is sent. | |
415 | * @tx_max_coalesced_frames: Maximum number of packets to be sent | |
416 | * before a TX interrupt. | |
417 | * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that | |
418 | * this value applies while an IRQ is being serviced by the host. | |
419 | * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames, | |
420 | * except that this value applies while an IRQ is being serviced | |
421 | * by the host. | |
422 | * @stats_block_coalesce_usecs: How many usecs to delay in-memory | |
423 | * statistics block updates. Some drivers do not have an | |
424 | * in-memory statistic block, and in such cases this value is | |
425 | * ignored. This value must not be zero. | |
426 | * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing. | |
427 | * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing. | |
428 | * @pkt_rate_low: Threshold for low packet rate (packets per second). | |
429 | * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after | |
430 | * a packet arrives, when the packet rate is below @pkt_rate_low. | |
431 | * @rx_max_coalesced_frames_low: Maximum number of packets to be received | |
432 | * before an RX interrupt, when the packet rate is below @pkt_rate_low. | |
433 | * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after | |
434 | * a packet is sent, when the packet rate is below @pkt_rate_low. | |
435 | * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before | |
436 | * a TX interrupt, when the packet rate is below @pkt_rate_low. | |
437 | * @pkt_rate_high: Threshold for high packet rate (packets per second). | |
438 | * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after | |
439 | * a packet arrives, when the packet rate is above @pkt_rate_high. | |
440 | * @rx_max_coalesced_frames_high: Maximum number of packets to be received | |
441 | * before an RX interrupt, when the packet rate is above @pkt_rate_high. | |
442 | * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after | |
443 | * a packet is sent, when the packet rate is above @pkt_rate_high. | |
444 | * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before | |
445 | * a TX interrupt, when the packet rate is above @pkt_rate_high. | |
446 | * @rate_sample_interval: How often to do adaptive coalescing packet rate | |
447 | * sampling, measured in seconds. Must not be zero. | |
448 | * | |
073e3cf2 BH |
449 | * Each pair of (usecs, max_frames) fields specifies that interrupts |
450 | * should be coalesced until | |
607ca46e DH |
451 | * (usecs > 0 && time_since_first_completion >= usecs) || |
452 | * (max_frames > 0 && completed_frames >= max_frames) | |
073e3cf2 | 453 | * |
607ca46e DH |
454 | * It is illegal to set both usecs and max_frames to zero as this |
455 | * would cause interrupts to never be generated. To disable | |
456 | * coalescing, set usecs = 0 and max_frames = 1. | |
457 | * | |
458 | * Some implementations ignore the value of max_frames and use the | |
073e3cf2 BH |
459 | * condition time_since_first_completion >= usecs |
460 | * | |
607ca46e DH |
461 | * This is deprecated. Drivers for hardware that does not support |
462 | * counting completions should validate that max_frames == !rx_usecs. | |
463 | * | |
464 | * Adaptive RX/TX coalescing is an algorithm implemented by some | |
465 | * drivers to improve latency under low packet rates and improve | |
466 | * throughput under high packet rates. Some drivers only implement | |
467 | * one of RX or TX adaptive coalescing. Anything not implemented by | |
468 | * the driver causes these values to be silently ignored. | |
469 | * | |
470 | * When the packet rate is below @pkt_rate_high but above | |
471 | * @pkt_rate_low (both measured in packets per second) the | |
472 | * normal {rx,tx}_* coalescing parameters are used. | |
473 | */ | |
474 | struct ethtool_coalesce { | |
475 | __u32 cmd; | |
476 | __u32 rx_coalesce_usecs; | |
477 | __u32 rx_max_coalesced_frames; | |
478 | __u32 rx_coalesce_usecs_irq; | |
479 | __u32 rx_max_coalesced_frames_irq; | |
480 | __u32 tx_coalesce_usecs; | |
481 | __u32 tx_max_coalesced_frames; | |
482 | __u32 tx_coalesce_usecs_irq; | |
483 | __u32 tx_max_coalesced_frames_irq; | |
484 | __u32 stats_block_coalesce_usecs; | |
485 | __u32 use_adaptive_rx_coalesce; | |
486 | __u32 use_adaptive_tx_coalesce; | |
487 | __u32 pkt_rate_low; | |
488 | __u32 rx_coalesce_usecs_low; | |
489 | __u32 rx_max_coalesced_frames_low; | |
490 | __u32 tx_coalesce_usecs_low; | |
491 | __u32 tx_max_coalesced_frames_low; | |
492 | __u32 pkt_rate_high; | |
493 | __u32 rx_coalesce_usecs_high; | |
494 | __u32 rx_max_coalesced_frames_high; | |
495 | __u32 tx_coalesce_usecs_high; | |
496 | __u32 tx_max_coalesced_frames_high; | |
497 | __u32 rate_sample_interval; | |
498 | }; | |
499 | ||
af440a8a BH |
500 | /** |
501 | * struct ethtool_ringparam - RX/TX ring parameters | |
502 | * @cmd: Command number = %ETHTOOL_GRINGPARAM or %ETHTOOL_SRINGPARAM | |
503 | * @rx_max_pending: Maximum supported number of pending entries per | |
504 | * RX ring. Read-only. | |
505 | * @rx_mini_max_pending: Maximum supported number of pending entries | |
506 | * per RX mini ring. Read-only. | |
507 | * @rx_jumbo_max_pending: Maximum supported number of pending entries | |
508 | * per RX jumbo ring. Read-only. | |
509 | * @tx_max_pending: Maximum supported number of pending entries per | |
510 | * TX ring. Read-only. | |
511 | * @rx_pending: Current maximum number of pending entries per RX ring | |
512 | * @rx_mini_pending: Current maximum number of pending entries per RX | |
513 | * mini ring | |
514 | * @rx_jumbo_pending: Current maximum number of pending entries per RX | |
515 | * jumbo ring | |
516 | * @tx_pending: Current maximum supported number of pending entries | |
517 | * per TX ring | |
518 | * | |
519 | * If the interface does not have separate RX mini and/or jumbo rings, | |
520 | * @rx_mini_max_pending and/or @rx_jumbo_max_pending will be 0. | |
521 | * | |
522 | * There may also be driver-dependent minimum values for the number | |
523 | * of entries per ring. | |
524 | */ | |
607ca46e | 525 | struct ethtool_ringparam { |
af440a8a | 526 | __u32 cmd; |
607ca46e DH |
527 | __u32 rx_max_pending; |
528 | __u32 rx_mini_max_pending; | |
529 | __u32 rx_jumbo_max_pending; | |
530 | __u32 tx_max_pending; | |
607ca46e DH |
531 | __u32 rx_pending; |
532 | __u32 rx_mini_pending; | |
533 | __u32 rx_jumbo_pending; | |
534 | __u32 tx_pending; | |
535 | }; | |
536 | ||
537 | /** | |
538 | * struct ethtool_channels - configuring number of network channel | |
539 | * @cmd: ETHTOOL_{G,S}CHANNELS | |
540 | * @max_rx: Read only. Maximum number of receive channel the driver support. | |
541 | * @max_tx: Read only. Maximum number of transmit channel the driver support. | |
542 | * @max_other: Read only. Maximum number of other channel the driver support. | |
543 | * @max_combined: Read only. Maximum number of combined channel the driver | |
544 | * support. Set of queues RX, TX or other. | |
545 | * @rx_count: Valid values are in the range 1 to the max_rx. | |
546 | * @tx_count: Valid values are in the range 1 to the max_tx. | |
547 | * @other_count: Valid values are in the range 1 to the max_other. | |
548 | * @combined_count: Valid values are in the range 1 to the max_combined. | |
549 | * | |
550 | * This can be used to configure RX, TX and other channels. | |
551 | */ | |
552 | ||
553 | struct ethtool_channels { | |
554 | __u32 cmd; | |
555 | __u32 max_rx; | |
556 | __u32 max_tx; | |
557 | __u32 max_other; | |
558 | __u32 max_combined; | |
559 | __u32 rx_count; | |
560 | __u32 tx_count; | |
561 | __u32 other_count; | |
562 | __u32 combined_count; | |
563 | }; | |
564 | ||
6a7a1081 BH |
565 | /** |
566 | * struct ethtool_pauseparam - Ethernet pause (flow control) parameters | |
567 | * @cmd: Command number = %ETHTOOL_GPAUSEPARAM or %ETHTOOL_SPAUSEPARAM | |
568 | * @autoneg: Flag to enable autonegotiation of pause frame use | |
569 | * @rx_pause: Flag to enable reception of pause frames | |
570 | * @tx_pause: Flag to enable transmission of pause frames | |
571 | * | |
572 | * Drivers should reject a non-zero setting of @autoneg when | |
573 | * autoneogotiation is disabled (or not supported) for the link. | |
574 | * | |
575 | * If the link is autonegotiated, drivers should use | |
576 | * mii_advertise_flowctrl() or similar code to set the advertised | |
577 | * pause frame capabilities based on the @rx_pause and @tx_pause flags, | |
578 | * even if @autoneg is zero. They should also allow the advertised | |
579 | * pause frame capabilities to be controlled directly through the | |
580 | * advertising field of &struct ethtool_cmd. | |
581 | * | |
582 | * If @autoneg is non-zero, the MAC is configured to send and/or | |
583 | * receive pause frames according to the result of autonegotiation. | |
584 | * Otherwise, it is configured directly based on the @rx_pause and | |
585 | * @tx_pause flags. | |
586 | */ | |
607ca46e | 587 | struct ethtool_pauseparam { |
6a7a1081 | 588 | __u32 cmd; |
607ca46e DH |
589 | __u32 autoneg; |
590 | __u32 rx_pause; | |
591 | __u32 tx_pause; | |
592 | }; | |
593 | ||
f0ebc2b6 | 594 | /* Link extended state */ |
ecc31c60 AC |
595 | enum ethtool_link_ext_state { |
596 | ETHTOOL_LINK_EXT_STATE_AUTONEG, | |
597 | ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE, | |
598 | ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH, | |
599 | ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY, | |
600 | ETHTOOL_LINK_EXT_STATE_NO_CABLE, | |
601 | ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE, | |
602 | ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE, | |
603 | ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE, | |
604 | ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED, | |
605 | ETHTOOL_LINK_EXT_STATE_OVERHEAT, | |
606 | }; | |
607 | ||
f0ebc2b6 | 608 | /* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */ |
ecc31c60 AC |
609 | enum ethtool_link_ext_substate_autoneg { |
610 | ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED = 1, | |
611 | ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED, | |
612 | ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED, | |
613 | ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE, | |
614 | ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE, | |
615 | ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD, | |
616 | }; | |
617 | ||
f0ebc2b6 | 618 | /* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE. |
ecc31c60 AC |
619 | */ |
620 | enum ethtool_link_ext_substate_link_training { | |
621 | ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED = 1, | |
622 | ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT, | |
623 | ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY, | |
624 | ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT, | |
625 | }; | |
626 | ||
f0ebc2b6 | 627 | /* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH. |
ecc31c60 AC |
628 | */ |
629 | enum ethtool_link_ext_substate_link_logical_mismatch { | |
630 | ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK = 1, | |
631 | ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK, | |
632 | ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS, | |
633 | ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED, | |
634 | ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED, | |
635 | }; | |
636 | ||
f0ebc2b6 | 637 | /* More information in addition to ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY. |
ecc31c60 AC |
638 | */ |
639 | enum ethtool_link_ext_substate_bad_signal_integrity { | |
640 | ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS = 1, | |
641 | ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE, | |
642 | }; | |
643 | ||
f0ebc2b6 | 644 | /* More information in addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE. */ |
ecc31c60 AC |
645 | enum ethtool_link_ext_substate_cable_issue { |
646 | ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE = 1, | |
647 | ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE, | |
648 | }; | |
649 | ||
607ca46e | 650 | #define ETH_GSTRING_LEN 32 |
fe5df1b9 BH |
651 | |
652 | /** | |
653 | * enum ethtool_stringset - string set ID | |
654 | * @ETH_SS_TEST: Self-test result names, for use with %ETHTOOL_TEST | |
655 | * @ETH_SS_STATS: Statistic names, for use with %ETHTOOL_GSTATS | |
656 | * @ETH_SS_PRIV_FLAGS: Driver private flag names, for use with | |
657 | * %ETHTOOL_GPFLAGS and %ETHTOOL_SPFLAGS | |
658 | * @ETH_SS_NTUPLE_FILTERS: Previously used with %ETHTOOL_GRXNTUPLE; | |
659 | * now deprecated | |
660 | * @ETH_SS_FEATURES: Device feature names | |
892311f6 | 661 | * @ETH_SS_RSS_HASH_FUNCS: RSS hush function names |
d9c65de0 | 662 | * @ETH_SS_TUNABLES: tunable names |
f3a40945 | 663 | * @ETH_SS_PHY_STATS: Statistic names, for use with %ETHTOOL_GPHYSTATS |
0d27f4e4 | 664 | * @ETH_SS_PHY_TUNABLES: PHY tunable names |
428c122f | 665 | * @ETH_SS_LINK_MODES: link mode names |
6a94b8cc | 666 | * @ETH_SS_MSG_CLASSES: debug message class names |
51ea22b0 | 667 | * @ETH_SS_WOL_MODES: wake-on-lan modes |
f76510b4 MK |
668 | * @ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags |
669 | * @ETH_SS_TS_TX_TYPES: timestamping Tx types | |
670 | * @ETH_SS_TS_RX_FILTERS: timestamping Rx filters | |
c7d759eb | 671 | * @ETH_SS_UDP_TUNNEL_TYPES: UDP tunnel types |
d9c65de0 JK |
672 | * |
673 | * @ETH_SS_COUNT: number of defined string sets | |
fe5df1b9 | 674 | */ |
607ca46e DH |
675 | enum ethtool_stringset { |
676 | ETH_SS_TEST = 0, | |
677 | ETH_SS_STATS, | |
678 | ETH_SS_PRIV_FLAGS, | |
fe5df1b9 | 679 | ETH_SS_NTUPLE_FILTERS, |
607ca46e | 680 | ETH_SS_FEATURES, |
892311f6 | 681 | ETH_SS_RSS_HASH_FUNCS, |
a4244b0c | 682 | ETH_SS_TUNABLES, |
f3a40945 | 683 | ETH_SS_PHY_STATS, |
0d27f4e4 | 684 | ETH_SS_PHY_TUNABLES, |
428c122f | 685 | ETH_SS_LINK_MODES, |
6a94b8cc | 686 | ETH_SS_MSG_CLASSES, |
51ea22b0 | 687 | ETH_SS_WOL_MODES, |
f76510b4 MK |
688 | ETH_SS_SOF_TIMESTAMPING, |
689 | ETH_SS_TS_TX_TYPES, | |
690 | ETH_SS_TS_RX_FILTERS, | |
c7d759eb | 691 | ETH_SS_UDP_TUNNEL_TYPES, |
71921690 MK |
692 | |
693 | /* add new constants above here */ | |
694 | ETH_SS_COUNT | |
607ca46e DH |
695 | }; |
696 | ||
fe5df1b9 BH |
697 | /** |
698 | * struct ethtool_gstrings - string set for data tagging | |
699 | * @cmd: Command number = %ETHTOOL_GSTRINGS | |
700 | * @string_set: String set ID; one of &enum ethtool_stringset | |
701 | * @len: On return, the number of strings in the string set | |
702 | * @data: Buffer for strings. Each string is null-padded to a size of | |
703 | * %ETH_GSTRING_LEN. | |
704 | * | |
705 | * Users must use %ETHTOOL_GSSET_INFO to find the number of strings in | |
706 | * the string set. They must allocate a buffer of the appropriate | |
707 | * size immediately following this structure. | |
708 | */ | |
607ca46e | 709 | struct ethtool_gstrings { |
fe5df1b9 BH |
710 | __u32 cmd; |
711 | __u32 string_set; | |
712 | __u32 len; | |
607ca46e DH |
713 | __u8 data[0]; |
714 | }; | |
715 | ||
fe5df1b9 BH |
716 | /** |
717 | * struct ethtool_sset_info - string set information | |
718 | * @cmd: Command number = %ETHTOOL_GSSET_INFO | |
83e5feeb | 719 | * @reserved: Reserved for future use; see the note on reserved space. |
fe5df1b9 BH |
720 | * @sset_mask: On entry, a bitmask of string sets to query, with bits |
721 | * numbered according to &enum ethtool_stringset. On return, a | |
722 | * bitmask of those string sets queried that are supported. | |
723 | * @data: Buffer for string set sizes. On return, this contains the | |
724 | * size of each string set that was queried and supported, in | |
725 | * order of ID. | |
726 | * | |
727 | * Example: The user passes in @sset_mask = 0x7 (sets 0, 1, 2) and on | |
728 | * return @sset_mask == 0x6 (sets 1, 2). Then @data[0] contains the | |
729 | * size of set 1 and @data[1] contains the size of set 2. | |
730 | * | |
731 | * Users must allocate a buffer of the appropriate size (4 * number of | |
732 | * sets queried) immediately following this structure. | |
733 | */ | |
607ca46e | 734 | struct ethtool_sset_info { |
fe5df1b9 | 735 | __u32 cmd; |
607ca46e | 736 | __u32 reserved; |
fe5df1b9 BH |
737 | __u64 sset_mask; |
738 | __u32 data[0]; | |
607ca46e DH |
739 | }; |
740 | ||
741 | /** | |
742 | * enum ethtool_test_flags - flags definition of ethtool_test | |
743 | * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise | |
744 | * only online tests. | |
745 | * @ETH_TEST_FL_FAILED: Driver set this flag if test fails. | |
746 | * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback | |
747 | * test. | |
748 | * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test | |
749 | */ | |
750 | ||
751 | enum ethtool_test_flags { | |
752 | ETH_TEST_FL_OFFLINE = (1 << 0), | |
753 | ETH_TEST_FL_FAILED = (1 << 1), | |
754 | ETH_TEST_FL_EXTERNAL_LB = (1 << 2), | |
755 | ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3), | |
756 | }; | |
757 | ||
4e5a62db BH |
758 | /** |
759 | * struct ethtool_test - device self-test invocation | |
760 | * @cmd: Command number = %ETHTOOL_TEST | |
761 | * @flags: A bitmask of flags from &enum ethtool_test_flags. Some | |
762 | * flags may be set by the user on entry; others may be set by | |
763 | * the driver on return. | |
83e5feeb | 764 | * @reserved: Reserved for future use; see the note on reserved space. |
4e5a62db BH |
765 | * @len: On return, the number of test results |
766 | * @data: Array of test results | |
767 | * | |
768 | * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the | |
769 | * number of test results that will be returned. They must allocate a | |
770 | * buffer of the appropriate size (8 * number of results) immediately | |
771 | * following this structure. | |
772 | */ | |
607ca46e | 773 | struct ethtool_test { |
4e5a62db BH |
774 | __u32 cmd; |
775 | __u32 flags; | |
607ca46e | 776 | __u32 reserved; |
4e5a62db | 777 | __u32 len; |
607ca46e DH |
778 | __u64 data[0]; |
779 | }; | |
780 | ||
59091229 BH |
781 | /** |
782 | * struct ethtool_stats - device-specific statistics | |
783 | * @cmd: Command number = %ETHTOOL_GSTATS | |
784 | * @n_stats: On return, the number of statistics | |
785 | * @data: Array of statistics | |
786 | * | |
787 | * Users must use %ETHTOOL_GSSET_INFO or %ETHTOOL_GDRVINFO to find the | |
788 | * number of statistics that will be returned. They must allocate a | |
789 | * buffer of the appropriate size (8 * number of statistics) | |
790 | * immediately following this structure. | |
791 | */ | |
607ca46e | 792 | struct ethtool_stats { |
59091229 BH |
793 | __u32 cmd; |
794 | __u32 n_stats; | |
607ca46e DH |
795 | __u64 data[0]; |
796 | }; | |
797 | ||
f432c095 BH |
798 | /** |
799 | * struct ethtool_perm_addr - permanent hardware address | |
800 | * @cmd: Command number = %ETHTOOL_GPERMADDR | |
801 | * @size: On entry, the size of the buffer. On return, the size of the | |
802 | * address. The command fails if the buffer is too small. | |
803 | * @data: Buffer for the address | |
804 | * | |
805 | * Users must allocate the buffer immediately following this structure. | |
806 | * A buffer size of %MAX_ADDR_LEN should be sufficient for any address | |
807 | * type. | |
808 | */ | |
607ca46e | 809 | struct ethtool_perm_addr { |
f432c095 | 810 | __u32 cmd; |
607ca46e DH |
811 | __u32 size; |
812 | __u8 data[0]; | |
813 | }; | |
814 | ||
815 | /* boolean flags controlling per-interface behavior characteristics. | |
816 | * When reading, the flag indicates whether or not a certain behavior | |
817 | * is enabled/present. When writing, the flag indicates whether | |
818 | * or not the driver should turn on (set) or off (clear) a behavior. | |
819 | * | |
820 | * Some behaviors may read-only (unconditionally absent or present). | |
821 | * If such is the case, return EINVAL in the set-flags operation if the | |
822 | * flag differs from the read-only value. | |
823 | */ | |
824 | enum ethtool_flags { | |
825 | ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */ | |
826 | ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */ | |
827 | ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */ | |
828 | ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */ | |
829 | ETH_FLAG_RXHASH = (1 << 28), | |
830 | }; | |
831 | ||
832 | /* The following structures are for supporting RX network flow | |
833 | * classification and RX n-tuple configuration. Note, all multibyte | |
834 | * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to | |
835 | * be in network byte order. | |
836 | */ | |
837 | ||
838 | /** | |
839 | * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc. | |
840 | * @ip4src: Source host | |
841 | * @ip4dst: Destination host | |
842 | * @psrc: Source port | |
843 | * @pdst: Destination port | |
844 | * @tos: Type-of-service | |
845 | * | |
846 | * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow. | |
847 | */ | |
848 | struct ethtool_tcpip4_spec { | |
849 | __be32 ip4src; | |
850 | __be32 ip4dst; | |
851 | __be16 psrc; | |
852 | __be16 pdst; | |
853 | __u8 tos; | |
854 | }; | |
855 | ||
856 | /** | |
857 | * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4 | |
858 | * @ip4src: Source host | |
859 | * @ip4dst: Destination host | |
860 | * @spi: Security parameters index | |
861 | * @tos: Type-of-service | |
862 | * | |
863 | * This can be used to specify an IPsec transport or tunnel over IPv4. | |
864 | */ | |
865 | struct ethtool_ah_espip4_spec { | |
866 | __be32 ip4src; | |
867 | __be32 ip4dst; | |
868 | __be32 spi; | |
869 | __u8 tos; | |
870 | }; | |
871 | ||
872 | #define ETH_RX_NFC_IP4 1 | |
873 | ||
874 | /** | |
875 | * struct ethtool_usrip4_spec - general flow specification for IPv4 | |
876 | * @ip4src: Source host | |
877 | * @ip4dst: Destination host | |
878 | * @l4_4_bytes: First 4 bytes of transport (layer 4) header | |
879 | * @tos: Type-of-service | |
880 | * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0 | |
881 | * @proto: Transport protocol number; mask must be 0 | |
882 | */ | |
883 | struct ethtool_usrip4_spec { | |
884 | __be32 ip4src; | |
885 | __be32 ip4dst; | |
886 | __be32 l4_4_bytes; | |
887 | __u8 tos; | |
888 | __u8 ip_ver; | |
889 | __u8 proto; | |
890 | }; | |
891 | ||
72bb6872 EC |
892 | /** |
893 | * struct ethtool_tcpip6_spec - flow specification for TCP/IPv6 etc. | |
894 | * @ip6src: Source host | |
895 | * @ip6dst: Destination host | |
896 | * @psrc: Source port | |
897 | * @pdst: Destination port | |
898 | * @tclass: Traffic Class | |
899 | * | |
900 | * This can be used to specify a TCP/IPv6, UDP/IPv6 or SCTP/IPv6 flow. | |
901 | */ | |
902 | struct ethtool_tcpip6_spec { | |
903 | __be32 ip6src[4]; | |
904 | __be32 ip6dst[4]; | |
905 | __be16 psrc; | |
906 | __be16 pdst; | |
907 | __u8 tclass; | |
908 | }; | |
909 | ||
910 | /** | |
911 | * struct ethtool_ah_espip6_spec - flow specification for IPsec/IPv6 | |
912 | * @ip6src: Source host | |
913 | * @ip6dst: Destination host | |
914 | * @spi: Security parameters index | |
915 | * @tclass: Traffic Class | |
916 | * | |
917 | * This can be used to specify an IPsec transport or tunnel over IPv6. | |
918 | */ | |
919 | struct ethtool_ah_espip6_spec { | |
920 | __be32 ip6src[4]; | |
921 | __be32 ip6dst[4]; | |
922 | __be32 spi; | |
923 | __u8 tclass; | |
924 | }; | |
925 | ||
926 | /** | |
927 | * struct ethtool_usrip6_spec - general flow specification for IPv6 | |
928 | * @ip6src: Source host | |
929 | * @ip6dst: Destination host | |
930 | * @l4_4_bytes: First 4 bytes of transport (layer 4) header | |
931 | * @tclass: Traffic Class | |
932 | * @l4_proto: Transport protocol number (nexthdr after any Extension Headers) | |
933 | */ | |
934 | struct ethtool_usrip6_spec { | |
935 | __be32 ip6src[4]; | |
936 | __be32 ip6dst[4]; | |
937 | __be32 l4_4_bytes; | |
938 | __u8 tclass; | |
939 | __u8 l4_proto; | |
940 | }; | |
941 | ||
607ca46e DH |
942 | union ethtool_flow_union { |
943 | struct ethtool_tcpip4_spec tcp_ip4_spec; | |
944 | struct ethtool_tcpip4_spec udp_ip4_spec; | |
945 | struct ethtool_tcpip4_spec sctp_ip4_spec; | |
946 | struct ethtool_ah_espip4_spec ah_ip4_spec; | |
947 | struct ethtool_ah_espip4_spec esp_ip4_spec; | |
948 | struct ethtool_usrip4_spec usr_ip4_spec; | |
72bb6872 EC |
949 | struct ethtool_tcpip6_spec tcp_ip6_spec; |
950 | struct ethtool_tcpip6_spec udp_ip6_spec; | |
951 | struct ethtool_tcpip6_spec sctp_ip6_spec; | |
952 | struct ethtool_ah_espip6_spec ah_ip6_spec; | |
953 | struct ethtool_ah_espip6_spec esp_ip6_spec; | |
954 | struct ethtool_usrip6_spec usr_ip6_spec; | |
607ca46e | 955 | struct ethhdr ether_spec; |
d4676eac | 956 | __u8 hdata[52]; |
607ca46e DH |
957 | }; |
958 | ||
dc2e5734 YB |
959 | /** |
960 | * struct ethtool_flow_ext - additional RX flow fields | |
961 | * @h_dest: destination MAC address | |
962 | * @vlan_etype: VLAN EtherType | |
963 | * @vlan_tci: VLAN tag control information | |
964 | * @data: user defined data | |
83e5feeb | 965 | * @padding: Reserved for future use; see the note on reserved space. |
dc2e5734 YB |
966 | * |
967 | * Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT | |
968 | * is set in &struct ethtool_rx_flow_spec @flow_type. | |
969 | * @h_dest is valid if %FLOW_MAC_EXT is set. | |
970 | */ | |
607ca46e | 971 | struct ethtool_flow_ext { |
d4676eac | 972 | __u8 padding[2]; |
dc2e5734 | 973 | unsigned char h_dest[ETH_ALEN]; |
d4676eac YB |
974 | __be16 vlan_etype; |
975 | __be16 vlan_tci; | |
976 | __be32 data[2]; | |
607ca46e DH |
977 | }; |
978 | ||
979 | /** | |
980 | * struct ethtool_rx_flow_spec - classification rule for RX flows | |
981 | * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW | |
982 | * @h_u: Flow fields to match (dependent on @flow_type) | |
983 | * @h_ext: Additional fields to match | |
984 | * @m_u: Masks for flow field bits to be matched | |
985 | * @m_ext: Masks for additional field bits to be matched | |
986 | * Note, all additional fields must be ignored unless @flow_type | |
dc2e5734 YB |
987 | * includes the %FLOW_EXT or %FLOW_MAC_EXT flag |
988 | * (see &struct ethtool_flow_ext description). | |
607ca46e | 989 | * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC |
6cfef793 FF |
990 | * if packets should be discarded, or %RX_CLS_FLOW_WAKE if the |
991 | * packets should be used for Wake-on-LAN with %WAKE_FILTER | |
607ca46e DH |
992 | * @location: Location of rule in the table. Locations must be |
993 | * numbered such that a flow matching multiple rules will be | |
994 | * classified according to the first (lowest numbered) rule. | |
995 | */ | |
996 | struct ethtool_rx_flow_spec { | |
997 | __u32 flow_type; | |
998 | union ethtool_flow_union h_u; | |
999 | struct ethtool_flow_ext h_ext; | |
1000 | union ethtool_flow_union m_u; | |
1001 | struct ethtool_flow_ext m_ext; | |
1002 | __u64 ring_cookie; | |
1003 | __u32 location; | |
1004 | }; | |
1005 | ||
54e8cb78 | 1006 | /* How rings are laid out when accessing virtual functions or |
8cf6f497 JF |
1007 | * offloaded queues is device specific. To allow users to do flow |
1008 | * steering and specify these queues the ring cookie is partitioned | |
1009 | * into a 32bit queue index with an 8 bit virtual function id. | |
1010 | * This also leaves the 3bytes for further specifiers. It is possible | |
1011 | * future devices may support more than 256 virtual functions if | |
1012 | * devices start supporting PCIe w/ARI. However at the moment I | |
1013 | * do not know of any devices that support this so I do not reserve | |
1014 | * space for this at this time. If a future patch consumes the next | |
54e8cb78 | 1015 | * byte it should be aware of this possibility. |
8cf6f497 JF |
1016 | */ |
1017 | #define ETHTOOL_RX_FLOW_SPEC_RING 0x00000000FFFFFFFFLL | |
1018 | #define ETHTOOL_RX_FLOW_SPEC_RING_VF 0x000000FF00000000LL | |
1019 | #define ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF 32 | |
1020 | static inline __u64 ethtool_get_flow_spec_ring(__u64 ring_cookie) | |
1021 | { | |
1022 | return ETHTOOL_RX_FLOW_SPEC_RING & ring_cookie; | |
d89d4155 | 1023 | } |
8cf6f497 JF |
1024 | |
1025 | static inline __u64 ethtool_get_flow_spec_ring_vf(__u64 ring_cookie) | |
1026 | { | |
1027 | return (ETHTOOL_RX_FLOW_SPEC_RING_VF & ring_cookie) >> | |
1028 | ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF; | |
d89d4155 | 1029 | } |
8cf6f497 | 1030 | |
607ca46e DH |
1031 | /** |
1032 | * struct ethtool_rxnfc - command to get or set RX flow classification rules | |
1033 | * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH, | |
1034 | * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE, | |
1035 | * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS | |
1036 | * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW | |
1037 | * @data: Command-dependent value | |
1038 | * @fs: Flow classification rule | |
84a1d9c4 | 1039 | * @rss_context: RSS context to be affected |
607ca46e DH |
1040 | * @rule_cnt: Number of rules to be affected |
1041 | * @rule_locs: Array of used rule locations | |
1042 | * | |
1043 | * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating | |
1044 | * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following | |
84a1d9c4 EC |
1045 | * structure fields must not be used, except that if @flow_type includes |
1046 | * the %FLOW_RSS flag, then @rss_context determines which RSS context to | |
1047 | * act on. | |
607ca46e DH |
1048 | * |
1049 | * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues | |
1050 | * on return. | |
1051 | * | |
1052 | * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined | |
1053 | * rules on return. If @data is non-zero on return then it is the | |
1054 | * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the | |
1055 | * driver supports any special location values. If that flag is not | |
1056 | * set in @data then special location values should not be used. | |
1057 | * | |
1058 | * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an | |
84a1d9c4 EC |
1059 | * existing rule on entry and @fs contains the rule on return; if |
1060 | * @fs.@flow_type includes the %FLOW_RSS flag, then @rss_context is | |
1061 | * filled with the RSS context ID associated with the rule. | |
607ca46e DH |
1062 | * |
1063 | * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the | |
1064 | * user buffer for @rule_locs on entry. On return, @data is the size | |
1065 | * of the rule table, @rule_cnt is the number of defined rules, and | |
1066 | * @rule_locs contains the locations of the defined rules. Drivers | |
1067 | * must use the second parameter to get_rxnfc() instead of @rule_locs. | |
1068 | * | |
1069 | * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update. | |
1070 | * @fs.@location either specifies the location to use or is a special | |
1071 | * location value with %RX_CLS_LOC_SPECIAL flag set. On return, | |
84a1d9c4 EC |
1072 | * @fs.@location is the actual rule location. If @fs.@flow_type |
1073 | * includes the %FLOW_RSS flag, @rss_context is the RSS context ID to | |
1074 | * use for flow spreading traffic which matches this rule. The value | |
1075 | * from the rxfh indirection table will be added to @fs.@ring_cookie | |
1076 | * to choose which ring to deliver to. | |
607ca46e DH |
1077 | * |
1078 | * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an | |
1079 | * existing rule on entry. | |
1080 | * | |
1081 | * A driver supporting the special location values for | |
1082 | * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused | |
1083 | * location, and may remove a rule at a later location (lower | |
1084 | * priority) that matches exactly the same set of flows. The special | |
073e3cf2 | 1085 | * values are %RX_CLS_LOC_ANY, selecting any location; |
607ca46e DH |
1086 | * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum |
1087 | * priority); and %RX_CLS_LOC_LAST, selecting the last suitable | |
1088 | * location (minimum priority). Additional special values may be | |
1089 | * defined in future and drivers must return -%EINVAL for any | |
1090 | * unrecognised value. | |
1091 | */ | |
1092 | struct ethtool_rxnfc { | |
1093 | __u32 cmd; | |
1094 | __u32 flow_type; | |
1095 | __u64 data; | |
1096 | struct ethtool_rx_flow_spec fs; | |
84a1d9c4 EC |
1097 | union { |
1098 | __u32 rule_cnt; | |
1099 | __u32 rss_context; | |
1100 | }; | |
607ca46e DH |
1101 | __u32 rule_locs[0]; |
1102 | }; | |
1103 | ||
1104 | ||
1105 | /** | |
1106 | * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection | |
1107 | * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR | |
1108 | * @size: On entry, the array size of the user buffer, which may be zero. | |
1109 | * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware | |
1110 | * indirection table. | |
1111 | * @ring_index: RX ring/queue index for each hash value | |
1112 | * | |
1113 | * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size | |
1114 | * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means | |
1115 | * the table should be reset to default values. This last feature | |
1116 | * is not supported by the original implementations. | |
1117 | */ | |
1118 | struct ethtool_rxfh_indir { | |
1119 | __u32 cmd; | |
1120 | __u32 size; | |
1121 | __u32 ring_index[0]; | |
1122 | }; | |
1123 | ||
3de0b592 VD |
1124 | /** |
1125 | * struct ethtool_rxfh - command to get/set RX flow hash indir or/and hash key. | |
1126 | * @cmd: Specific command number - %ETHTOOL_GRSSH or %ETHTOOL_SRSSH | |
84a1d9c4 EC |
1127 | * @rss_context: RSS context identifier. Context 0 is the default for normal |
1128 | * traffic; other contexts can be referenced as the destination for RX flow | |
1129 | * classification rules. %ETH_RXFH_CONTEXT_ALLOC is used with command | |
1130 | * %ETHTOOL_SRSSH to allocate a new RSS context; on return this field will | |
1131 | * contain the ID of the newly allocated context. | |
38c891a4 BH |
1132 | * @indir_size: On entry, the array size of the user buffer for the |
1133 | * indirection table, which may be zero, or (for %ETHTOOL_SRSSH), | |
1134 | * %ETH_RXFH_INDIR_NO_CHANGE. On return from %ETHTOOL_GRSSH, | |
1135 | * the array size of the hardware indirection table. | |
1136 | * @key_size: On entry, the array size of the user buffer for the hash key, | |
1137 | * which may be zero. On return from %ETHTOOL_GRSSH, the size of the | |
1138 | * hardware hash key. | |
892311f6 EP |
1139 | * @hfunc: Defines the current RSS hash function used by HW (or to be set to). |
1140 | * Valid values are one of the %ETH_RSS_HASH_*. | |
83e5feeb JK |
1141 | * @rsvd8: Reserved for future use; see the note on reserved space. |
1142 | * @rsvd32: Reserved for future use; see the note on reserved space. | |
3de0b592 | 1143 | * @rss_config: RX ring/queue index for each hash value i.e., indirection table |
38c891a4 BH |
1144 | * of @indir_size __u32 elements, followed by hash key of @key_size |
1145 | * bytes. | |
3de0b592 VD |
1146 | * |
1147 | * For %ETHTOOL_GRSSH, a @indir_size and key_size of zero means that only the | |
7455fa24 BH |
1148 | * size should be returned. For %ETHTOOL_SRSSH, an @indir_size of |
1149 | * %ETH_RXFH_INDIR_NO_CHANGE means that indir table setting is not requested | |
1150 | * and a @indir_size of zero means the indir table should be reset to default | |
84a1d9c4 EC |
1151 | * values (if @rss_context == 0) or that the RSS context should be deleted. |
1152 | * An hfunc of zero means that hash function setting is not requested. | |
3de0b592 VD |
1153 | */ |
1154 | struct ethtool_rxfh { | |
1155 | __u32 cmd; | |
1156 | __u32 rss_context; | |
1157 | __u32 indir_size; | |
1158 | __u32 key_size; | |
892311f6 EP |
1159 | __u8 hfunc; |
1160 | __u8 rsvd8[3]; | |
1161 | __u32 rsvd32; | |
3de0b592 VD |
1162 | __u32 rss_config[0]; |
1163 | }; | |
84a1d9c4 | 1164 | #define ETH_RXFH_CONTEXT_ALLOC 0xffffffff |
7455fa24 | 1165 | #define ETH_RXFH_INDIR_NO_CHANGE 0xffffffff |
3de0b592 | 1166 | |
607ca46e DH |
1167 | /** |
1168 | * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter | |
1169 | * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW | |
1170 | * @h_u: Flow field values to match (dependent on @flow_type) | |
1171 | * @m_u: Masks for flow field value bits to be ignored | |
1172 | * @vlan_tag: VLAN tag to match | |
1173 | * @vlan_tag_mask: Mask for VLAN tag bits to be ignored | |
1174 | * @data: Driver-dependent data to match | |
1175 | * @data_mask: Mask for driver-dependent data bits to be ignored | |
1176 | * @action: RX ring/queue index to deliver to (non-negative) or other action | |
1177 | * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP) | |
1178 | * | |
1179 | * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where | |
1180 | * a field value and mask are both zero this is treated as if all mask | |
1181 | * bits are set i.e. the field is ignored. | |
1182 | */ | |
1183 | struct ethtool_rx_ntuple_flow_spec { | |
1184 | __u32 flow_type; | |
1185 | union { | |
1186 | struct ethtool_tcpip4_spec tcp_ip4_spec; | |
1187 | struct ethtool_tcpip4_spec udp_ip4_spec; | |
1188 | struct ethtool_tcpip4_spec sctp_ip4_spec; | |
1189 | struct ethtool_ah_espip4_spec ah_ip4_spec; | |
1190 | struct ethtool_ah_espip4_spec esp_ip4_spec; | |
1191 | struct ethtool_usrip4_spec usr_ip4_spec; | |
1192 | struct ethhdr ether_spec; | |
1193 | __u8 hdata[72]; | |
1194 | } h_u, m_u; | |
1195 | ||
1196 | __u16 vlan_tag; | |
1197 | __u16 vlan_tag_mask; | |
1198 | __u64 data; | |
1199 | __u64 data_mask; | |
1200 | ||
1201 | __s32 action; | |
1202 | #define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */ | |
1203 | #define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */ | |
1204 | }; | |
1205 | ||
1206 | /** | |
1207 | * struct ethtool_rx_ntuple - command to set or clear RX flow filter | |
1208 | * @cmd: Command number - %ETHTOOL_SRXNTUPLE | |
1209 | * @fs: Flow filter specification | |
1210 | */ | |
1211 | struct ethtool_rx_ntuple { | |
1212 | __u32 cmd; | |
1213 | struct ethtool_rx_ntuple_flow_spec fs; | |
1214 | }; | |
1215 | ||
1216 | #define ETHTOOL_FLASH_MAX_FILENAME 128 | |
1217 | enum ethtool_flash_op_type { | |
1218 | ETHTOOL_FLASH_ALL_REGIONS = 0, | |
1219 | }; | |
1220 | ||
1221 | /* for passing firmware flashing related parameters */ | |
1222 | struct ethtool_flash { | |
1223 | __u32 cmd; | |
1224 | __u32 region; | |
1225 | char data[ETHTOOL_FLASH_MAX_FILENAME]; | |
1226 | }; | |
1227 | ||
1228 | /** | |
1229 | * struct ethtool_dump - used for retrieving, setting device dump | |
1230 | * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or | |
1231 | * %ETHTOOL_SET_DUMP | |
1232 | * @version: FW version of the dump, filled in by driver | |
1233 | * @flag: driver dependent flag for dump setting, filled in by driver during | |
1234 | * get and filled in by ethtool for set operation. | |
1235 | * flag must be initialized by macro ETH_FW_DUMP_DISABLE value when | |
1236 | * firmware dump is disabled. | |
1237 | * @len: length of dump data, used as the length of the user buffer on entry to | |
1238 | * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver | |
1239 | * for %ETHTOOL_GET_DUMP_FLAG command | |
1240 | * @data: data collected for get dump data operation | |
1241 | */ | |
607ca46e DH |
1242 | struct ethtool_dump { |
1243 | __u32 cmd; | |
1244 | __u32 version; | |
1245 | __u32 flag; | |
1246 | __u32 len; | |
1247 | __u8 data[0]; | |
1248 | }; | |
1249 | ||
ba569dc3 BH |
1250 | #define ETH_FW_DUMP_DISABLE 0 |
1251 | ||
607ca46e DH |
1252 | /* for returning and changing feature sets */ |
1253 | ||
1254 | /** | |
1255 | * struct ethtool_get_features_block - block with state of 32 features | |
1256 | * @available: mask of changeable features | |
1257 | * @requested: mask of features requested to be enabled if possible | |
1258 | * @active: mask of currently enabled features | |
1259 | * @never_changed: mask of features not changeable for any device | |
1260 | */ | |
1261 | struct ethtool_get_features_block { | |
1262 | __u32 available; | |
1263 | __u32 requested; | |
1264 | __u32 active; | |
1265 | __u32 never_changed; | |
1266 | }; | |
1267 | ||
1268 | /** | |
1269 | * struct ethtool_gfeatures - command to get state of device's features | |
1270 | * @cmd: command number = %ETHTOOL_GFEATURES | |
073e3cf2 BH |
1271 | * @size: On entry, the number of elements in the features[] array; |
1272 | * on return, the number of elements in features[] needed to hold | |
1273 | * all features | |
607ca46e DH |
1274 | * @features: state of features |
1275 | */ | |
1276 | struct ethtool_gfeatures { | |
1277 | __u32 cmd; | |
1278 | __u32 size; | |
1279 | struct ethtool_get_features_block features[0]; | |
1280 | }; | |
1281 | ||
1282 | /** | |
1283 | * struct ethtool_set_features_block - block with request for 32 features | |
1284 | * @valid: mask of features to be changed | |
1285 | * @requested: values of features to be changed | |
1286 | */ | |
1287 | struct ethtool_set_features_block { | |
1288 | __u32 valid; | |
1289 | __u32 requested; | |
1290 | }; | |
1291 | ||
1292 | /** | |
1293 | * struct ethtool_sfeatures - command to request change in device's features | |
1294 | * @cmd: command number = %ETHTOOL_SFEATURES | |
1295 | * @size: array size of the features[] array | |
1296 | * @features: feature change masks | |
1297 | */ | |
1298 | struct ethtool_sfeatures { | |
1299 | __u32 cmd; | |
1300 | __u32 size; | |
1301 | struct ethtool_set_features_block features[0]; | |
1302 | }; | |
1303 | ||
1304 | /** | |
1305 | * struct ethtool_ts_info - holds a device's timestamping and PHC association | |
1306 | * @cmd: command number = %ETHTOOL_GET_TS_INFO | |
1307 | * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags | |
1308 | * @phc_index: device index of the associated PHC, or -1 if there is none | |
1309 | * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values | |
83e5feeb | 1310 | * @tx_reserved: Reserved for future use; see the note on reserved space. |
607ca46e | 1311 | * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values |
83e5feeb | 1312 | * @rx_reserved: Reserved for future use; see the note on reserved space. |
607ca46e DH |
1313 | * |
1314 | * The bits in the 'tx_types' and 'rx_filters' fields correspond to | |
1315 | * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values, | |
1316 | * respectively. For example, if the device supports HWTSTAMP_TX_ON, | |
1317 | * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set. | |
eff3cddc JK |
1318 | * |
1319 | * Drivers should only report the filters they actually support without | |
1320 | * upscaling in the SIOCSHWTSTAMP ioctl. If the SIOCSHWSTAMP request for | |
1321 | * HWTSTAMP_FILTER_V1_SYNC is supported by HWTSTAMP_FILTER_V1_EVENT, then the | |
1322 | * driver should only report HWTSTAMP_FILTER_V1_EVENT in this op. | |
607ca46e DH |
1323 | */ |
1324 | struct ethtool_ts_info { | |
1325 | __u32 cmd; | |
1326 | __u32 so_timestamping; | |
1327 | __s32 phc_index; | |
1328 | __u32 tx_types; | |
1329 | __u32 tx_reserved[3]; | |
1330 | __u32 rx_filters; | |
1331 | __u32 rx_reserved[3]; | |
1332 | }; | |
1333 | ||
1334 | /* | |
1335 | * %ETHTOOL_SFEATURES changes features present in features[].valid to the | |
1336 | * values of corresponding bits in features[].requested. Bits in .requested | |
1337 | * not set in .valid or not changeable are ignored. | |
1338 | * | |
1339 | * Returns %EINVAL when .valid contains undefined or never-changeable bits | |
1340 | * or size is not equal to required number of features words (32-bit blocks). | |
1341 | * Returns >= 0 if request was completed; bits set in the value mean: | |
1342 | * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not | |
1343 | * changeable (not present in %ETHTOOL_GFEATURES' features[].available) | |
1344 | * those bits were ignored. | |
1345 | * %ETHTOOL_F_WISH - some or all changes requested were recorded but the | |
1346 | * resulting state of bits masked by .valid is not equal to .requested. | |
1347 | * Probably there are other device-specific constraints on some features | |
1348 | * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered | |
1349 | * here as though ignored bits were cleared. | |
1350 | * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling | |
1351 | * compatibility functions. Requested offload state cannot be properly | |
1352 | * managed by kernel. | |
1353 | * | |
1354 | * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of | |
1355 | * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands | |
1356 | * for ETH_SS_FEATURES string set. First entry in the table corresponds to least | |
1357 | * significant bit in features[0] fields. Empty strings mark undefined features. | |
1358 | */ | |
1359 | enum ethtool_sfeatures_retval_bits { | |
1360 | ETHTOOL_F_UNSUPPORTED__BIT, | |
1361 | ETHTOOL_F_WISH__BIT, | |
1362 | ETHTOOL_F_COMPAT__BIT, | |
1363 | }; | |
1364 | ||
1365 | #define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT) | |
1366 | #define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT) | |
1367 | #define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT) | |
1368 | ||
ac2c7ad0 KL |
1369 | #define MAX_NUM_QUEUE 4096 |
1370 | ||
1371 | /** | |
1372 | * struct ethtool_per_queue_op - apply sub command to the queues in mask. | |
1373 | * @cmd: ETHTOOL_PERQUEUE | |
1374 | * @sub_command: the sub command which apply to each queues | |
1375 | * @queue_mask: Bitmap of the queues which sub command apply to | |
1376 | * @data: A complete command structure following for each of the queues addressed | |
1377 | */ | |
1378 | struct ethtool_per_queue_op { | |
1379 | __u32 cmd; | |
1380 | __u32 sub_command; | |
b5d3755a | 1381 | __u32 queue_mask[__KERNEL_DIV_ROUND_UP(MAX_NUM_QUEUE, 32)]; |
ac2c7ad0 KL |
1382 | char data[]; |
1383 | }; | |
607ca46e | 1384 | |
1a5f3da2 | 1385 | /** |
6dbf94b2 | 1386 | * struct ethtool_fecparam - Ethernet Forward Error Correction parameters |
1a5f3da2 | 1387 | * @cmd: Command number = %ETHTOOL_GFECPARAM or %ETHTOOL_SFECPARAM |
6dbf94b2 JK |
1388 | * @active_fec: FEC mode which is active on the port, single bit set, GET only. |
1389 | * @fec: Bitmask of configured FEC modes. | |
240e1144 | 1390 | * @reserved: Reserved for future extensions, ignore on GET, write 0 for SET. |
6dbf94b2 | 1391 | * |
ad1cd785 JK |
1392 | * Note that @reserved was never validated on input and ethtool user space |
1393 | * left it uninitialized when calling SET. Hence going forward it can only be | |
1394 | * used to return a value to userspace with GET. | |
1395 | * | |
6dbf94b2 JK |
1396 | * FEC modes supported by the device can be read via %ETHTOOL_GLINKSETTINGS. |
1397 | * FEC settings are configured by link autonegotiation whenever it's enabled. | |
1398 | * With autoneg on %ETHTOOL_GFECPARAM can be used to read the current mode. | |
1399 | * | |
1400 | * When autoneg is disabled %ETHTOOL_SFECPARAM controls the FEC settings. | |
1401 | * It is recommended that drivers only accept a single bit set in @fec. | |
1402 | * When multiple bits are set in @fec drivers may pick mode in an implementation | |
1403 | * dependent way. Drivers should reject mixing %ETHTOOL_FEC_AUTO_BIT with other | |
1404 | * FEC modes, because it's unclear whether in this case other modes constrain | |
1405 | * AUTO or are independent choices. | |
1406 | * Drivers must reject SET requests if they support none of the requested modes. | |
1407 | * | |
1408 | * If device does not support FEC drivers may use %ETHTOOL_FEC_NONE instead | |
1409 | * of returning %EOPNOTSUPP from %ETHTOOL_GFECPARAM. | |
1410 | * | |
1411 | * See enum ethtool_fec_config_bits for definition of valid bits for both | |
1412 | * @fec and @active_fec. | |
1a5f3da2 VSR |
1413 | */ |
1414 | struct ethtool_fecparam { | |
1415 | __u32 cmd; | |
1416 | /* bitmask of FEC modes */ | |
1417 | __u32 active_fec; | |
1418 | __u32 fec; | |
1419 | __u32 reserved; | |
1420 | }; | |
1421 | ||
1422 | /** | |
1423 | * enum ethtool_fec_config_bits - flags definition of ethtool_fec_configuration | |
d04feeca JK |
1424 | * @ETHTOOL_FEC_NONE_BIT: FEC mode configuration is not supported. Should not |
1425 | * be used together with other bits. GET only. | |
1426 | * @ETHTOOL_FEC_AUTO_BIT: Select default/best FEC mode automatically, usually | |
1427 | * based link mode and SFP parameters read from module's | |
1428 | * EEPROM. This bit does _not_ mean autonegotiation. | |
1429 | * @ETHTOOL_FEC_OFF_BIT: No FEC Mode | |
1430 | * @ETHTOOL_FEC_RS_BIT: Reed-Solomon FEC Mode | |
1431 | * @ETHTOOL_FEC_BASER_BIT: Base-R/Reed-Solomon FEC Mode | |
1432 | * @ETHTOOL_FEC_LLRS_BIT: Low Latency Reed Solomon FEC Mode (25G/50G Ethernet | |
1433 | * Consortium) | |
1a5f3da2 VSR |
1434 | */ |
1435 | enum ethtool_fec_config_bits { | |
1436 | ETHTOOL_FEC_NONE_BIT, | |
1437 | ETHTOOL_FEC_AUTO_BIT, | |
1438 | ETHTOOL_FEC_OFF_BIT, | |
1439 | ETHTOOL_FEC_RS_BIT, | |
1440 | ETHTOOL_FEC_BASER_BIT, | |
f623e597 | 1441 | ETHTOOL_FEC_LLRS_BIT, |
1a5f3da2 VSR |
1442 | }; |
1443 | ||
1444 | #define ETHTOOL_FEC_NONE (1 << ETHTOOL_FEC_NONE_BIT) | |
1445 | #define ETHTOOL_FEC_AUTO (1 << ETHTOOL_FEC_AUTO_BIT) | |
1446 | #define ETHTOOL_FEC_OFF (1 << ETHTOOL_FEC_OFF_BIT) | |
1447 | #define ETHTOOL_FEC_RS (1 << ETHTOOL_FEC_RS_BIT) | |
1448 | #define ETHTOOL_FEC_BASER (1 << ETHTOOL_FEC_BASER_BIT) | |
f623e597 | 1449 | #define ETHTOOL_FEC_LLRS (1 << ETHTOOL_FEC_LLRS_BIT) |
1a5f3da2 | 1450 | |
607ca46e | 1451 | /* CMDs currently supported */ |
3f1ac7a7 DD |
1452 | #define ETHTOOL_GSET 0x00000001 /* DEPRECATED, Get settings. |
1453 | * Please use ETHTOOL_GLINKSETTINGS | |
1454 | */ | |
1455 | #define ETHTOOL_SSET 0x00000002 /* DEPRECATED, Set settings. | |
1456 | * Please use ETHTOOL_SLINKSETTINGS | |
1457 | */ | |
607ca46e DH |
1458 | #define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ |
1459 | #define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ | |
1460 | #define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ | |
1461 | #define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */ | |
1462 | #define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ | |
1463 | #define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */ | |
1464 | #define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */ | |
1465 | /* Get link status for host, i.e. whether the interface *and* the | |
1466 | * physical port (if there is one) are up (ethtool_value). */ | |
1467 | #define ETHTOOL_GLINK 0x0000000a | |
1468 | #define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ | |
1469 | #define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */ | |
1470 | #define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ | |
1471 | #define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ | |
1472 | #define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ | |
1473 | #define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */ | |
1474 | #define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ | |
1475 | #define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ | |
1476 | #define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ | |
1477 | #define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ | |
1478 | #define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ | |
1479 | #define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ | |
1480 | #define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable | |
1481 | * (ethtool_value) */ | |
1482 | #define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable | |
1483 | * (ethtool_value). */ | |
1484 | #define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */ | |
1485 | #define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ | |
1486 | #define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ | |
1487 | #define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ | |
1488 | #define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ | |
1489 | #define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ | |
1490 | #define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */ | |
1491 | #define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ | |
1492 | #define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ | |
1493 | #define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ | |
1494 | #define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ | |
1495 | #define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */ | |
1496 | #define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */ | |
1497 | #define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */ | |
1498 | #define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */ | |
1499 | ||
1500 | #define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */ | |
1501 | #define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */ | |
1502 | #define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */ | |
1503 | #define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */ | |
1504 | #define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */ | |
1505 | #define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */ | |
1506 | #define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */ | |
1507 | #define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */ | |
1508 | #define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */ | |
1509 | #define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */ | |
1510 | #define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */ | |
1511 | #define ETHTOOL_RESET 0x00000034 /* Reset hardware */ | |
1512 | #define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */ | |
1513 | #define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */ | |
1514 | #define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */ | |
1515 | #define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */ | |
1516 | #define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */ | |
1517 | ||
1518 | #define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */ | |
1519 | #define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */ | |
1520 | #define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */ | |
1521 | #define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */ | |
1522 | #define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */ | |
1523 | #define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */ | |
1524 | #define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */ | |
1525 | #define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */ | |
1526 | #define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */ | |
1527 | #define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */ | |
1528 | #define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */ | |
1529 | #define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */ | |
1530 | ||
3de0b592 VD |
1531 | #define ETHTOOL_GRSSH 0x00000046 /* Get RX flow hash configuration */ |
1532 | #define ETHTOOL_SRSSH 0x00000047 /* Set RX flow hash configuration */ | |
f0db9b07 GV |
1533 | #define ETHTOOL_GTUNABLE 0x00000048 /* Get tunable configuration */ |
1534 | #define ETHTOOL_STUNABLE 0x00000049 /* Set tunable configuration */ | |
f3a40945 | 1535 | #define ETHTOOL_GPHYSTATS 0x0000004a /* get PHY-specific statistics */ |
3de0b592 | 1536 | |
ac2c7ad0 KL |
1537 | #define ETHTOOL_PERQUEUE 0x0000004b /* Set per queue options */ |
1538 | ||
3f1ac7a7 DD |
1539 | #define ETHTOOL_GLINKSETTINGS 0x0000004c /* Get ethtool_link_settings */ |
1540 | #define ETHTOOL_SLINKSETTINGS 0x0000004d /* Set ethtool_link_settings */ | |
0d27f4e4 RL |
1541 | #define ETHTOOL_PHY_GTUNABLE 0x0000004e /* Get PHY tunable configuration */ |
1542 | #define ETHTOOL_PHY_STUNABLE 0x0000004f /* Set PHY tunable configuration */ | |
1a5f3da2 VSR |
1543 | #define ETHTOOL_GFECPARAM 0x00000050 /* Get FEC settings */ |
1544 | #define ETHTOOL_SFECPARAM 0x00000051 /* Set FEC settings */ | |
3f1ac7a7 | 1545 | |
607ca46e DH |
1546 | /* compatibility with older code */ |
1547 | #define SPARC_ETH_GSET ETHTOOL_GSET | |
1548 | #define SPARC_ETH_SSET ETHTOOL_SSET | |
1549 | ||
3f1ac7a7 DD |
1550 | /* Link mode bit indices */ |
1551 | enum ethtool_link_mode_bit_indices { | |
1552 | ETHTOOL_LINK_MODE_10baseT_Half_BIT = 0, | |
1553 | ETHTOOL_LINK_MODE_10baseT_Full_BIT = 1, | |
1554 | ETHTOOL_LINK_MODE_100baseT_Half_BIT = 2, | |
1555 | ETHTOOL_LINK_MODE_100baseT_Full_BIT = 3, | |
1556 | ETHTOOL_LINK_MODE_1000baseT_Half_BIT = 4, | |
1557 | ETHTOOL_LINK_MODE_1000baseT_Full_BIT = 5, | |
1558 | ETHTOOL_LINK_MODE_Autoneg_BIT = 6, | |
1559 | ETHTOOL_LINK_MODE_TP_BIT = 7, | |
1560 | ETHTOOL_LINK_MODE_AUI_BIT = 8, | |
1561 | ETHTOOL_LINK_MODE_MII_BIT = 9, | |
1562 | ETHTOOL_LINK_MODE_FIBRE_BIT = 10, | |
1563 | ETHTOOL_LINK_MODE_BNC_BIT = 11, | |
1564 | ETHTOOL_LINK_MODE_10000baseT_Full_BIT = 12, | |
1565 | ETHTOOL_LINK_MODE_Pause_BIT = 13, | |
1566 | ETHTOOL_LINK_MODE_Asym_Pause_BIT = 14, | |
1567 | ETHTOOL_LINK_MODE_2500baseX_Full_BIT = 15, | |
1568 | ETHTOOL_LINK_MODE_Backplane_BIT = 16, | |
1569 | ETHTOOL_LINK_MODE_1000baseKX_Full_BIT = 17, | |
1570 | ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT = 18, | |
1571 | ETHTOOL_LINK_MODE_10000baseKR_Full_BIT = 19, | |
1572 | ETHTOOL_LINK_MODE_10000baseR_FEC_BIT = 20, | |
1573 | ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT = 21, | |
1574 | ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT = 22, | |
1575 | ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT = 23, | |
1576 | ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT = 24, | |
1577 | ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT = 25, | |
1578 | ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT = 26, | |
1579 | ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT = 27, | |
1580 | ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT = 28, | |
1581 | ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT = 29, | |
1582 | ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT = 30, | |
3851112e | 1583 | ETHTOOL_LINK_MODE_25000baseCR_Full_BIT = 31, |
e728fdf0 HK |
1584 | |
1585 | /* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit | |
1586 | * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_* | |
1587 | * macro for bits > 31. The only way to use indices > 31 is to | |
1588 | * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. | |
1589 | */ | |
1590 | ||
3851112e VSR |
1591 | ETHTOOL_LINK_MODE_25000baseKR_Full_BIT = 32, |
1592 | ETHTOOL_LINK_MODE_25000baseSR_Full_BIT = 33, | |
1593 | ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT = 34, | |
1594 | ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT = 35, | |
1595 | ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT = 36, | |
1596 | ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT = 37, | |
1597 | ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT = 38, | |
1598 | ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT = 39, | |
5711a982 VSR |
1599 | ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT = 40, |
1600 | ETHTOOL_LINK_MODE_1000baseX_Full_BIT = 41, | |
1601 | ETHTOOL_LINK_MODE_10000baseCR_Full_BIT = 42, | |
1602 | ETHTOOL_LINK_MODE_10000baseSR_Full_BIT = 43, | |
1603 | ETHTOOL_LINK_MODE_10000baseLR_Full_BIT = 44, | |
1604 | ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT = 45, | |
1605 | ETHTOOL_LINK_MODE_10000baseER_Full_BIT = 46, | |
94842b4f PB |
1606 | ETHTOOL_LINK_MODE_2500baseT_Full_BIT = 47, |
1607 | ETHTOOL_LINK_MODE_5000baseT_Full_BIT = 48, | |
5711a982 | 1608 | |
1a5f3da2 VSR |
1609 | ETHTOOL_LINK_MODE_FEC_NONE_BIT = 49, |
1610 | ETHTOOL_LINK_MODE_FEC_RS_BIT = 50, | |
1611 | ETHTOOL_LINK_MODE_FEC_BASER_BIT = 51, | |
2736d94f AL |
1612 | ETHTOOL_LINK_MODE_50000baseKR_Full_BIT = 52, |
1613 | ETHTOOL_LINK_MODE_50000baseSR_Full_BIT = 53, | |
1614 | ETHTOOL_LINK_MODE_50000baseCR_Full_BIT = 54, | |
1615 | ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT = 55, | |
1616 | ETHTOOL_LINK_MODE_50000baseDR_Full_BIT = 56, | |
1617 | ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT = 57, | |
1618 | ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT = 58, | |
1619 | ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT = 59, | |
1620 | ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT = 60, | |
1621 | ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT = 61, | |
1622 | ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT = 62, | |
1623 | ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT = 63, | |
1624 | ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT = 64, | |
1625 | ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT = 65, | |
1626 | ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT = 66, | |
b2557764 AL |
1627 | ETHTOOL_LINK_MODE_100baseT1_Full_BIT = 67, |
1628 | ETHTOOL_LINK_MODE_1000baseT1_Full_BIT = 68, | |
14af7fd1 JP |
1629 | ETHTOOL_LINK_MODE_400000baseKR8_Full_BIT = 69, |
1630 | ETHTOOL_LINK_MODE_400000baseSR8_Full_BIT = 70, | |
1631 | ETHTOOL_LINK_MODE_400000baseLR8_ER8_FR8_Full_BIT = 71, | |
1632 | ETHTOOL_LINK_MODE_400000baseDR8_Full_BIT = 72, | |
1633 | ETHTOOL_LINK_MODE_400000baseCR8_Full_BIT = 73, | |
f623e597 | 1634 | ETHTOOL_LINK_MODE_FEC_LLRS_BIT = 74, |
065e0d42 ML |
1635 | ETHTOOL_LINK_MODE_100000baseKR_Full_BIT = 75, |
1636 | ETHTOOL_LINK_MODE_100000baseSR_Full_BIT = 76, | |
1637 | ETHTOOL_LINK_MODE_100000baseLR_ER_FR_Full_BIT = 77, | |
1638 | ETHTOOL_LINK_MODE_100000baseCR_Full_BIT = 78, | |
1639 | ETHTOOL_LINK_MODE_100000baseDR_Full_BIT = 79, | |
1640 | ETHTOOL_LINK_MODE_200000baseKR2_Full_BIT = 80, | |
1641 | ETHTOOL_LINK_MODE_200000baseSR2_Full_BIT = 81, | |
1642 | ETHTOOL_LINK_MODE_200000baseLR2_ER2_FR2_Full_BIT = 82, | |
1643 | ETHTOOL_LINK_MODE_200000baseDR2_Full_BIT = 83, | |
1644 | ETHTOOL_LINK_MODE_200000baseCR2_Full_BIT = 84, | |
1645 | ETHTOOL_LINK_MODE_400000baseKR4_Full_BIT = 85, | |
1646 | ETHTOOL_LINK_MODE_400000baseSR4_Full_BIT = 86, | |
1647 | ETHTOOL_LINK_MODE_400000baseLR4_ER4_FR4_Full_BIT = 87, | |
1648 | ETHTOOL_LINK_MODE_400000baseDR4_Full_BIT = 88, | |
1649 | ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT = 89, | |
55f13311 DM |
1650 | ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90, |
1651 | ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91, | |
e728fdf0 HK |
1652 | /* must be last entry */ |
1653 | __ETHTOOL_LINK_MODE_MASK_NBITS | |
3f1ac7a7 DD |
1654 | }; |
1655 | ||
1656 | #define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \ | |
1657 | (1UL << (ETHTOOL_LINK_MODE_ ## base_name ## _BIT)) | |
1658 | ||
1659 | /* DEPRECATED macros. Please migrate to | |
1660 | * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT | |
1661 | * define any new SUPPORTED_* macro for bits > 31. | |
1662 | */ | |
1663 | #define SUPPORTED_10baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half) | |
1664 | #define SUPPORTED_10baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full) | |
1665 | #define SUPPORTED_100baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half) | |
1666 | #define SUPPORTED_100baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full) | |
1667 | #define SUPPORTED_1000baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half) | |
1668 | #define SUPPORTED_1000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full) | |
1669 | #define SUPPORTED_Autoneg __ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg) | |
1670 | #define SUPPORTED_TP __ETHTOOL_LINK_MODE_LEGACY_MASK(TP) | |
1671 | #define SUPPORTED_AUI __ETHTOOL_LINK_MODE_LEGACY_MASK(AUI) | |
1672 | #define SUPPORTED_MII __ETHTOOL_LINK_MODE_LEGACY_MASK(MII) | |
1673 | #define SUPPORTED_FIBRE __ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE) | |
1674 | #define SUPPORTED_BNC __ETHTOOL_LINK_MODE_LEGACY_MASK(BNC) | |
1675 | #define SUPPORTED_10000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full) | |
1676 | #define SUPPORTED_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Pause) | |
1677 | #define SUPPORTED_Asym_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause) | |
1678 | #define SUPPORTED_2500baseX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full) | |
1679 | #define SUPPORTED_Backplane __ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane) | |
1680 | #define SUPPORTED_1000baseKX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full) | |
1681 | #define SUPPORTED_10000baseKX4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full) | |
1682 | #define SUPPORTED_10000baseKR_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full) | |
1683 | #define SUPPORTED_10000baseR_FEC __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC) | |
1684 | #define SUPPORTED_20000baseMLD2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full) | |
1685 | #define SUPPORTED_20000baseKR2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full) | |
1686 | #define SUPPORTED_40000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full) | |
1687 | #define SUPPORTED_40000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full) | |
1688 | #define SUPPORTED_40000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full) | |
1689 | #define SUPPORTED_40000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full) | |
1690 | #define SUPPORTED_56000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full) | |
1691 | #define SUPPORTED_56000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full) | |
1692 | #define SUPPORTED_56000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full) | |
1693 | #define SUPPORTED_56000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full) | |
1694 | /* Please do not define any new SUPPORTED_* macro for bits > 31, see | |
1695 | * notice above. | |
1696 | */ | |
1697 | ||
1698 | /* | |
1699 | * DEPRECATED macros. Please migrate to | |
1700 | * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT | |
1701 | * define any new ADERTISE_* macro for bits > 31. | |
1702 | */ | |
1703 | #define ADVERTISED_10baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half) | |
1704 | #define ADVERTISED_10baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full) | |
1705 | #define ADVERTISED_100baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half) | |
1706 | #define ADVERTISED_100baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full) | |
1707 | #define ADVERTISED_1000baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half) | |
1708 | #define ADVERTISED_1000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full) | |
1709 | #define ADVERTISED_Autoneg __ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg) | |
1710 | #define ADVERTISED_TP __ETHTOOL_LINK_MODE_LEGACY_MASK(TP) | |
1711 | #define ADVERTISED_AUI __ETHTOOL_LINK_MODE_LEGACY_MASK(AUI) | |
1712 | #define ADVERTISED_MII __ETHTOOL_LINK_MODE_LEGACY_MASK(MII) | |
1713 | #define ADVERTISED_FIBRE __ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE) | |
1714 | #define ADVERTISED_BNC __ETHTOOL_LINK_MODE_LEGACY_MASK(BNC) | |
1715 | #define ADVERTISED_10000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full) | |
1716 | #define ADVERTISED_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Pause) | |
1717 | #define ADVERTISED_Asym_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause) | |
1718 | #define ADVERTISED_2500baseX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full) | |
1719 | #define ADVERTISED_Backplane __ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane) | |
1720 | #define ADVERTISED_1000baseKX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full) | |
1721 | #define ADVERTISED_10000baseKX4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full) | |
1722 | #define ADVERTISED_10000baseKR_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full) | |
1723 | #define ADVERTISED_10000baseR_FEC __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC) | |
1724 | #define ADVERTISED_20000baseMLD2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full) | |
1725 | #define ADVERTISED_20000baseKR2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full) | |
1726 | #define ADVERTISED_40000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full) | |
1727 | #define ADVERTISED_40000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full) | |
1728 | #define ADVERTISED_40000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full) | |
1729 | #define ADVERTISED_40000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full) | |
1730 | #define ADVERTISED_56000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full) | |
1731 | #define ADVERTISED_56000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full) | |
1732 | #define ADVERTISED_56000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full) | |
1733 | #define ADVERTISED_56000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full) | |
1734 | /* Please do not define any new ADVERTISED_* macro for bits > 31, see | |
1735 | * notice above. | |
1736 | */ | |
607ca46e DH |
1737 | |
1738 | /* The following are all involved in forcing a particular link | |
1739 | * mode for the device for setting things. When getting the | |
1740 | * devices settings, these indicate the current mode and whether | |
1741 | * it was forced up into this mode or autonegotiated. | |
1742 | */ | |
1743 | ||
297fb414 ND |
1744 | /* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal. |
1745 | * Update drivers/net/phy/phy.c:phy_speed_to_str() and | |
1746 | * drivers/net/bonding/bond_3ad.c:__get_link_speed() when adding new values. | |
1747 | */ | |
607ca46e DH |
1748 | #define SPEED_10 10 |
1749 | #define SPEED_100 100 | |
1750 | #define SPEED_1000 1000 | |
1751 | #define SPEED_2500 2500 | |
c9a70d43 | 1752 | #define SPEED_5000 5000 |
607ca46e | 1753 | #define SPEED_10000 10000 |
0d7e2d21 | 1754 | #define SPEED_14000 14000 |
dcf972a3 | 1755 | #define SPEED_20000 20000 |
c9a70d43 | 1756 | #define SPEED_25000 25000 |
dcf972a3 | 1757 | #define SPEED_40000 40000 |
c9a70d43 | 1758 | #define SPEED_50000 50000 |
dcf972a3 | 1759 | #define SPEED_56000 56000 |
c9a70d43 | 1760 | #define SPEED_100000 100000 |
2736d94f | 1761 | #define SPEED_200000 200000 |
14af7fd1 | 1762 | #define SPEED_400000 400000 |
dcf972a3 | 1763 | |
607ca46e DH |
1764 | #define SPEED_UNKNOWN -1 |
1765 | ||
103a8ad1 NA |
1766 | static inline int ethtool_validate_speed(__u32 speed) |
1767 | { | |
afe64245 | 1768 | return speed <= INT_MAX || speed == (__u32)SPEED_UNKNOWN; |
103a8ad1 NA |
1769 | } |
1770 | ||
607ca46e DH |
1771 | /* Duplex, half or full. */ |
1772 | #define DUPLEX_HALF 0x00 | |
1773 | #define DUPLEX_FULL 0x01 | |
1774 | #define DUPLEX_UNKNOWN 0xff | |
1775 | ||
103a8ad1 NA |
1776 | static inline int ethtool_validate_duplex(__u8 duplex) |
1777 | { | |
1778 | switch (duplex) { | |
1779 | case DUPLEX_HALF: | |
1780 | case DUPLEX_FULL: | |
1781 | case DUPLEX_UNKNOWN: | |
1782 | return 1; | |
1783 | } | |
1784 | ||
1785 | return 0; | |
1786 | } | |
1787 | ||
bdbdac76 OR |
1788 | #define MASTER_SLAVE_CFG_UNSUPPORTED 0 |
1789 | #define MASTER_SLAVE_CFG_UNKNOWN 1 | |
1790 | #define MASTER_SLAVE_CFG_MASTER_PREFERRED 2 | |
1791 | #define MASTER_SLAVE_CFG_SLAVE_PREFERRED 3 | |
1792 | #define MASTER_SLAVE_CFG_MASTER_FORCE 4 | |
1793 | #define MASTER_SLAVE_CFG_SLAVE_FORCE 5 | |
1794 | #define MASTER_SLAVE_STATE_UNSUPPORTED 0 | |
1795 | #define MASTER_SLAVE_STATE_UNKNOWN 1 | |
1796 | #define MASTER_SLAVE_STATE_MASTER 2 | |
1797 | #define MASTER_SLAVE_STATE_SLAVE 3 | |
1798 | #define MASTER_SLAVE_STATE_ERR 4 | |
1799 | ||
607ca46e DH |
1800 | /* Which connector port. */ |
1801 | #define PORT_TP 0x00 | |
1802 | #define PORT_AUI 0x01 | |
1803 | #define PORT_MII 0x02 | |
1804 | #define PORT_FIBRE 0x03 | |
1805 | #define PORT_BNC 0x04 | |
1806 | #define PORT_DA 0x05 | |
1807 | #define PORT_NONE 0xef | |
1808 | #define PORT_OTHER 0xff | |
1809 | ||
1810 | /* Which transceiver to use. */ | |
7ec87211 FF |
1811 | #define XCVR_INTERNAL 0x00 /* PHY and MAC are in the same package */ |
1812 | #define XCVR_EXTERNAL 0x01 /* PHY and MAC are in different packages */ | |
607ca46e DH |
1813 | #define XCVR_DUMMY1 0x02 |
1814 | #define XCVR_DUMMY2 0x03 | |
1815 | #define XCVR_DUMMY3 0x04 | |
1816 | ||
bf8fc60a | 1817 | /* Enable or disable autonegotiation. */ |
607ca46e DH |
1818 | #define AUTONEG_DISABLE 0x00 |
1819 | #define AUTONEG_ENABLE 0x01 | |
1820 | ||
1821 | /* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then | |
1822 | * the driver is required to renegotiate link | |
1823 | */ | |
1824 | #define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */ | |
1825 | #define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */ | |
1826 | #define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */ | |
1827 | #define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */ | |
1828 | ||
1829 | /* Wake-On-Lan options. */ | |
1830 | #define WAKE_PHY (1 << 0) | |
1831 | #define WAKE_UCAST (1 << 1) | |
1832 | #define WAKE_MCAST (1 << 2) | |
1833 | #define WAKE_BCAST (1 << 3) | |
1834 | #define WAKE_ARP (1 << 4) | |
1835 | #define WAKE_MAGIC (1 << 5) | |
1836 | #define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ | |
6cfef793 | 1837 | #define WAKE_FILTER (1 << 7) |
607ca46e | 1838 | |
51ea22b0 MK |
1839 | #define WOL_MODE_COUNT 8 |
1840 | ||
607ca46e DH |
1841 | /* L2-L4 network traffic flow types */ |
1842 | #define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */ | |
1843 | #define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */ | |
1844 | #define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */ | |
1845 | #define AH_ESP_V4_FLOW 0x04 /* hash only */ | |
72bb6872 EC |
1846 | #define TCP_V6_FLOW 0x05 /* hash or spec (tcp_ip6_spec; nfc only) */ |
1847 | #define UDP_V6_FLOW 0x06 /* hash or spec (udp_ip6_spec; nfc only) */ | |
1848 | #define SCTP_V6_FLOW 0x07 /* hash or spec (sctp_ip6_spec; nfc only) */ | |
607ca46e DH |
1849 | #define AH_ESP_V6_FLOW 0x08 /* hash only */ |
1850 | #define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */ | |
1851 | #define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */ | |
72bb6872 EC |
1852 | #define AH_V6_FLOW 0x0b /* hash or spec (ah_ip6_spec; nfc only) */ |
1853 | #define ESP_V6_FLOW 0x0c /* hash or spec (esp_ip6_spec; nfc only) */ | |
1854 | #define IPV4_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ | |
1855 | #define IP_USER_FLOW IPV4_USER_FLOW | |
1856 | #define IPV6_USER_FLOW 0x0e /* spec only (usr_ip6_spec; nfc only) */ | |
607ca46e DH |
1857 | #define IPV4_FLOW 0x10 /* hash only */ |
1858 | #define IPV6_FLOW 0x11 /* hash only */ | |
1859 | #define ETHER_FLOW 0x12 /* spec only (ether_spec) */ | |
1860 | /* Flag to enable additional fields in struct ethtool_rx_flow_spec */ | |
1861 | #define FLOW_EXT 0x80000000 | |
d4676eac | 1862 | #define FLOW_MAC_EXT 0x40000000 |
84a1d9c4 EC |
1863 | /* Flag to enable RSS spreading of traffic matching rule (nfc only) */ |
1864 | #define FLOW_RSS 0x20000000 | |
607ca46e DH |
1865 | |
1866 | /* L3-L4 network traffic flow hash options */ | |
1867 | #define RXH_L2DA (1 << 1) | |
1868 | #define RXH_VLAN (1 << 2) | |
1869 | #define RXH_L3_PROTO (1 << 3) | |
1870 | #define RXH_IP_SRC (1 << 4) | |
1871 | #define RXH_IP_DST (1 << 5) | |
1872 | #define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */ | |
1873 | #define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */ | |
1874 | #define RXH_DISCARD (1 << 31) | |
1875 | ||
1876 | #define RX_CLS_FLOW_DISC 0xffffffffffffffffULL | |
6cfef793 | 1877 | #define RX_CLS_FLOW_WAKE 0xfffffffffffffffeULL |
607ca46e DH |
1878 | |
1879 | /* Special RX classification rule insert location values */ | |
1880 | #define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */ | |
1881 | #define RX_CLS_LOC_ANY 0xffffffff | |
1882 | #define RX_CLS_LOC_FIRST 0xfffffffe | |
1883 | #define RX_CLS_LOC_LAST 0xfffffffd | |
1884 | ||
1885 | /* EEPROM Standards for plug in modules */ | |
1886 | #define ETH_MODULE_SFF_8079 0x1 | |
1887 | #define ETH_MODULE_SFF_8079_LEN 256 | |
1888 | #define ETH_MODULE_SFF_8472 0x2 | |
1889 | #define ETH_MODULE_SFF_8472_LEN 512 | |
7202da8b SM |
1890 | #define ETH_MODULE_SFF_8636 0x3 |
1891 | #define ETH_MODULE_SFF_8636_LEN 256 | |
1892 | #define ETH_MODULE_SFF_8436 0x4 | |
1893 | #define ETH_MODULE_SFF_8436_LEN 256 | |
607ca46e | 1894 | |
0e1a2a3e EA |
1895 | #define ETH_MODULE_SFF_8636_MAX_LEN 640 |
1896 | #define ETH_MODULE_SFF_8436_MAX_LEN 640 | |
1897 | ||
607ca46e DH |
1898 | /* Reset flags */ |
1899 | /* The reset() operation must clear the flags for the components which | |
1900 | * were actually reset. On successful return, the flags indicate the | |
1901 | * components which were not reset, either because they do not exist | |
1902 | * in the hardware or because they cannot be reset independently. The | |
1903 | * driver must never reset any components that were not requested. | |
1904 | */ | |
1905 | enum ethtool_reset_flags { | |
1906 | /* These flags represent components dedicated to the interface | |
1907 | * the command is addressed to. Shift any flag left by | |
1908 | * ETH_RESET_SHARED_SHIFT to reset a shared component of the | |
1909 | * same type. | |
1910 | */ | |
1911 | ETH_RESET_MGMT = 1 << 0, /* Management processor */ | |
1912 | ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */ | |
1913 | ETH_RESET_DMA = 1 << 2, /* DMA engine */ | |
1914 | ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */ | |
1915 | ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */ | |
1916 | ETH_RESET_MAC = 1 << 5, /* Media access controller */ | |
1917 | ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */ | |
1918 | ETH_RESET_RAM = 1 << 7, /* RAM shared between | |
1919 | * multiple components */ | |
40e44a1e | 1920 | ETH_RESET_AP = 1 << 8, /* Application processor */ |
607ca46e DH |
1921 | |
1922 | ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to | |
1923 | * this interface */ | |
1924 | ETH_RESET_ALL = 0xffffffff, /* All components used by this | |
1925 | * interface, even if shared */ | |
1926 | }; | |
1927 | #define ETH_RESET_SHARED_SHIFT 16 | |
1928 | ||
3f1ac7a7 DD |
1929 | |
1930 | /** | |
1931 | * struct ethtool_link_settings - link control and status | |
1932 | * | |
1933 | * IMPORTANT, Backward compatibility notice: When implementing new | |
1934 | * user-space tools, please first try %ETHTOOL_GLINKSETTINGS, and | |
1935 | * if it succeeds use %ETHTOOL_SLINKSETTINGS to change link | |
1936 | * settings; do not use %ETHTOOL_SSET if %ETHTOOL_GLINKSETTINGS | |
1937 | * succeeded: stick to %ETHTOOL_GLINKSETTINGS/%SLINKSETTINGS in | |
1938 | * that case. Conversely, if %ETHTOOL_GLINKSETTINGS fails, use | |
1939 | * %ETHTOOL_GSET to query and %ETHTOOL_SSET to change link | |
1940 | * settings; do not use %ETHTOOL_SLINKSETTINGS if | |
1941 | * %ETHTOOL_GLINKSETTINGS failed: stick to | |
1942 | * %ETHTOOL_GSET/%ETHTOOL_SSET in that case. | |
1943 | * | |
1944 | * @cmd: Command number = %ETHTOOL_GLINKSETTINGS or %ETHTOOL_SLINKSETTINGS | |
1945 | * @speed: Link speed (Mbps) | |
1946 | * @duplex: Duplex mode; one of %DUPLEX_* | |
1947 | * @port: Physical connector type; one of %PORT_* | |
1948 | * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not | |
1949 | * applicable. For clause 45 PHYs this is the PRTAD. | |
1950 | * @autoneg: Enable/disable autonegotiation and auto-detection; | |
1951 | * either %AUTONEG_DISABLE or %AUTONEG_ENABLE | |
1952 | * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO | |
1953 | * protocols supported by the interface; 0 if unknown. | |
1954 | * Read-only. | |
1955 | * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of | |
1956 | * %ETH_TP_MDI_*. If the status is unknown or not applicable, the | |
1957 | * value will be %ETH_TP_MDI_INVALID. Read-only. | |
1958 | * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of | |
1959 | * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads | |
1960 | * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected. | |
1961 | * When written successfully, the link should be renegotiated if | |
1962 | * necessary. | |
1963 | * @link_mode_masks_nwords: Number of 32-bit words for each of the | |
1964 | * supported, advertising, lp_advertising link mode bitmaps. For | |
1965 | * %ETHTOOL_GLINKSETTINGS: on entry, number of words passed by user | |
1966 | * (>= 0); on return, if handshake in progress, negative if | |
1967 | * request size unsupported by kernel: absolute value indicates | |
5f2d4724 DD |
1968 | * kernel expected size and all the other fields but cmd |
1969 | * are 0; otherwise (handshake completed), strictly positive | |
1970 | * to indicate size used by kernel and cmd field stays | |
3f1ac7a7 DD |
1971 | * %ETHTOOL_GLINKSETTINGS, all other fields populated by driver. For |
1972 | * %ETHTOOL_SLINKSETTINGS: must be valid on entry, ie. a positive | |
1973 | * value returned previously by %ETHTOOL_GLINKSETTINGS, otherwise | |
1974 | * refused. For drivers: ignore this field (use kernel's | |
1975 | * __ETHTOOL_LINK_MODE_MASK_NBITS instead), any change to it will | |
1976 | * be overwritten by kernel. | |
1977 | * @supported: Bitmap with each bit meaning given by | |
1978 | * %ethtool_link_mode_bit_indices for the link modes, physical | |
1979 | * connectors and other link features for which the interface | |
1980 | * supports autonegotiation or auto-detection. Read-only. | |
1981 | * @advertising: Bitmap with each bit meaning given by | |
1982 | * %ethtool_link_mode_bit_indices for the link modes, physical | |
1983 | * connectors and other link features that are advertised through | |
1984 | * autonegotiation or enabled for auto-detection. | |
1985 | * @lp_advertising: Bitmap with each bit meaning given by | |
1986 | * %ethtool_link_mode_bit_indices for the link modes, and other | |
1987 | * link features that the link partner advertised through | |
1988 | * autonegotiation; 0 if unknown or not applicable. Read-only. | |
19cab887 FF |
1989 | * @transceiver: Used to distinguish different possible PHY types, |
1990 | * reported consistently by PHYLIB. Read-only. | |
d9c65de0 JK |
1991 | * @master_slave_cfg: Master/slave port mode. |
1992 | * @master_slave_state: Master/slave port state. | |
83e5feeb JK |
1993 | * @reserved: Reserved for future use; see the note on reserved space. |
1994 | * @reserved1: Reserved for future use; see the note on reserved space. | |
d9c65de0 | 1995 | * @link_mode_masks: Variable length bitmaps. |
3f1ac7a7 DD |
1996 | * |
1997 | * If autonegotiation is disabled, the speed and @duplex represent the | |
1998 | * fixed link mode and are writable if the driver supports multiple | |
1999 | * link modes. If it is enabled then they are read-only; if the link | |
2000 | * is up they represent the negotiated link mode; if the link is down, | |
2001 | * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and | |
2002 | * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. | |
2003 | * | |
2004 | * Some hardware interfaces may have multiple PHYs and/or physical | |
2005 | * connectors fitted or do not allow the driver to detect which are | |
2006 | * fitted. For these interfaces @port and/or @phy_address may be | |
2007 | * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE. | |
2008 | * Otherwise, attempts to write different values may be ignored or | |
2009 | * rejected. | |
2010 | * | |
2011 | * Deprecated %ethtool_cmd fields transceiver, maxtxpkt and maxrxpkt | |
9b300495 MK |
2012 | * are not available in %ethtool_link_settings. These fields will be |
2013 | * always set to zero in %ETHTOOL_GSET reply and %ETHTOOL_SSET will | |
2014 | * fail if any of them is set to non-zero value. | |
3f1ac7a7 DD |
2015 | * |
2016 | * Users should assume that all fields not marked read-only are | |
2017 | * writable and subject to validation by the driver. They should use | |
2018 | * %ETHTOOL_GLINKSETTINGS to get the current values before making specific | |
2019 | * changes and then applying them with %ETHTOOL_SLINKSETTINGS. | |
2020 | * | |
2021 | * Drivers that implement %get_link_ksettings and/or | |
2022 | * %set_link_ksettings should ignore the @cmd | |
2023 | * and @link_mode_masks_nwords fields (any change to them overwritten | |
2024 | * by kernel), and rely only on kernel's internal | |
2025 | * %__ETHTOOL_LINK_MODE_MASK_NBITS and | |
2026 | * %ethtool_link_mode_mask_t. Drivers that implement | |
2027 | * %set_link_ksettings() should validate all fields other than @cmd | |
2028 | * and @link_mode_masks_nwords that are not described as read-only or | |
2029 | * deprecated, and must ignore all fields described as read-only. | |
2030 | */ | |
2031 | struct ethtool_link_settings { | |
2032 | __u32 cmd; | |
2033 | __u32 speed; | |
2034 | __u8 duplex; | |
2035 | __u8 port; | |
2036 | __u8 phy_address; | |
2037 | __u8 autoneg; | |
2038 | __u8 mdio_support; | |
2039 | __u8 eth_tp_mdix; | |
2040 | __u8 eth_tp_mdix_ctrl; | |
2041 | __s8 link_mode_masks_nwords; | |
19cab887 | 2042 | __u8 transceiver; |
bdbdac76 OR |
2043 | __u8 master_slave_cfg; |
2044 | __u8 master_slave_state; | |
2045 | __u8 reserved1[1]; | |
19cab887 | 2046 | __u32 reserved[7]; |
3f1ac7a7 DD |
2047 | __u32 link_mode_masks[0]; |
2048 | /* layout of link_mode_masks fields: | |
2049 | * __u32 map_supported[link_mode_masks_nwords]; | |
2050 | * __u32 map_advertising[link_mode_masks_nwords]; | |
2051 | * __u32 map_lp_advertising[link_mode_masks_nwords]; | |
2052 | */ | |
2053 | }; | |
607ca46e | 2054 | #endif /* _UAPI_LINUX_ETHTOOL_H */ |