projects / linux-2.6-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge branch 'for-5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie...
[linux-2.6-block.git] / include / uapi / linux / cyclades.h
CommitLineData
6f52b16c 1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
607ca46e
DH		 2/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
3 * linux/include/linux/cyclades.h
4 *
5 * This file was initially written by
6 * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
7 * Ivan Passos <ivan@cyclades.com>.
8 *
9 * This file contains the general definitions for the cyclades.c driver
10 *$Log: cyclades.h,v $
11 *Revision 3.1 2002/01/29 11:36:16 henrique
12 *added throttle field on struct cyclades_port to indicate whether the
13 *port is throttled or not
14 *
15 *Revision 3.1 2000/04/19 18:52:52 ivan
16 *converted address fields to unsigned long and added fields for physical
17 *addresses on cyclades_card structure;
18 *
19 *Revision 3.0 1998/11/02 14:20:59 ivan
20 *added nports field on cyclades_card structure;
21 *
22 *Revision 2.5 1998/08/03 16:57:01 ivan
23 *added cyclades_idle_stats structure;
24 *
25 *Revision 2.4 1998/06/01 12:09:53 ivan
26 *removed closing_wait2 from cyclades_port structure;
27 *
28 *Revision 2.3 1998/03/16 18:01:12 ivan
29 *changes in the cyclades_port structure to get it closer to the
30 *standard serial port structure;
31 *added constants for new ioctls;
32 *
33 *Revision 2.2 1998/02/17 16:50:00 ivan
34 *changes in the cyclades_port structure (addition of shutdown_wait and
35 *chip_rev variables);
36 *added constants for new ioctls and for CD1400 rev. numbers.
37 *
38 *Revision 2.1 1997/10/24 16:03:00 ivan
39 *added rflow (which allows enabling the CD1400 special flow control
40 *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to
41 *cyclades_port structure;
42 *added Alpha support
43 *
44 *Revision 2.0 1997/06/30 10:30:00 ivan
45 *added some new doorbell command constants related to IOCTLW and
46 *UART error signaling
47 *
48 *Revision 1.8 1997/06/03 15:30:00 ivan
49 *added constant ZFIRM_HLT
50 *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
51 *
52 *Revision 1.7 1997/03/26 10:30:00 daniel
53 *new entries at the end of cyclades_port struct to reallocate
54 *variables illegally allocated within card memory.
55 *
56 *Revision 1.6 1996/09/09 18:35:30 bentson
57 *fold in changes for Cyclom-Z -- including structures for
58 *communicating with board as well modest changes to original
59 *structures to support new features.
60 *
61 *Revision 1.5 1995/11/13 21:13:31 bentson
62 *changes suggested by Michael Chastain <mec@duracef.shout.net>
63 *to support use of this file in non-kernel applications
64 *
65 *
66 */
67
68#ifndef _UAPI_LINUX_CYCLADES_H
69#define _UAPI_LINUX_CYCLADES_H
70
71#include <linux/types.h>
72
73struct cyclades_monitor {
74 unsigned long int_count;
75 unsigned long char_count;
76 unsigned long char_max;
77 unsigned long char_last;
78};
79
80/*
81 * These stats all reflect activity since the device was last initialized.
82 * (i.e., since the port was opened with no other processes already having it
83 * open)
84 */
85struct cyclades_idle_stats {
86 __kernel_time_t in_use; /* Time device has been in use (secs) */
87 __kernel_time_t recv_idle; /* Time since last char received (secs) */
88 __kernel_time_t xmit_idle; /* Time since last char transmitted (secs) */
89 unsigned long recv_bytes; /* Bytes received */
90 unsigned long xmit_bytes; /* Bytes transmitted */
91 unsigned long overruns; /* Input overruns */
92 unsigned long frame_errs; /* Input framing errors */
93 unsigned long parity_errs; /* Input parity errors */
94};
95
96#define CYCLADES_MAGIC 0x4359
97
98#define CYGETMON 0x435901
99#define CYGETTHRESH 0x435902
100#define CYSETTHRESH 0x435903
101#define CYGETDEFTHRESH 0x435904
102#define CYSETDEFTHRESH 0x435905
103#define CYGETTIMEOUT 0x435906
104#define CYSETTIMEOUT 0x435907
105#define CYGETDEFTIMEOUT 0x435908
106#define CYSETDEFTIMEOUT 0x435909
107#define CYSETRFLOW 0x43590a
108#define CYGETRFLOW 0x43590b
109#define CYSETRTSDTR_INV 0x43590c
110#define CYGETRTSDTR_INV 0x43590d
111#define CYZSETPOLLCYCLE 0x43590e
112#define CYZGETPOLLCYCLE 0x43590f
113#define CYGETCD1400VER 0x435910
114#define CYSETWAIT 0x435912
115#define CYGETWAIT 0x435913
116
117/*************** CYCLOM-Z ADDITIONS ***************/
118
119#define CZIOC ('M' << 8)
120#define CZ_NBOARDS (CZIOC|0xfa)
121#define CZ_BOOT_START (CZIOC|0xfb)
122#define CZ_BOOT_DATA (CZIOC|0xfc)
123#define CZ_BOOT_END (CZIOC|0xfd)
124#define CZ_TEST (CZIOC|0xfe)
125
126#define CZ_DEF_POLL (HZ/25)
127
128#define MAX_BOARD 4 /* Max number of boards */
129#define MAX_DEV 256 /* Max number of ports total */
130#define CYZ_MAX_SPEED 921600
131
132#define CYZ_FIFO_SIZE 16
133
134#define CYZ_BOOT_NWORDS 0x100
135struct CYZ_BOOT_CTRL {
136 unsigned short nboard;
137 int status[MAX_BOARD];
138 int nchannel[MAX_BOARD];
139 int fw_rev[MAX_BOARD];
140 unsigned long offset;
141 unsigned long data[CYZ_BOOT_NWORDS];
142};
143
144
145#ifndef DP_WINDOW_SIZE
146/*
147 * Memory Window Sizes
148 */
149
150#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
151#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
152 8Zo V.2 */
153#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
154
155/*
156 * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
157 * normally will access only interested on the fpga_id, fpga_version,
158 * start_cpu and stop_cpu.
159 */
160
161struct CUSTOM_REG {
162 __u32 fpga_id; /* FPGA Identification Register */
163 __u32 fpga_version; /* FPGA Version Number Register */
164 __u32 cpu_start; /* CPU start Register (write) */
165 __u32 cpu_stop; /* CPU stop Register (write) */
166 __u32 misc_reg; /* Miscellaneous Register */
167 __u32 idt_mode; /* IDT mode Register */
168 __u32 uart_irq_status; /* UART IRQ status Register */
169 __u32 clear_timer0_irq; /* Clear timer interrupt Register */
170 __u32 clear_timer1_irq; /* Clear timer interrupt Register */
171 __u32 clear_timer2_irq; /* Clear timer interrupt Register */
172 __u32 test_register; /* Test Register */
173 __u32 test_count; /* Test Count Register */
174 __u32 timer_select; /* Timer select register */
175 __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
176 __u32 ram_wait_state; /* RAM wait-state Register */
177 __u32 uart_wait_state; /* UART wait-state Register */
178 __u32 timer_wait_state; /* timer wait-state Register */
179 __u32 ack_wait_state; /* ACK wait State Register */
180};
181
182/*
183 * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
184 * registers. This structure can be used to access the 9060 registers
185 * (memory mapped).
186 */
187
188struct RUNTIME_9060 {
189 __u32 loc_addr_range; /* 00h - Local Address Range */
190 __u32 loc_addr_base; /* 04h - Local Address Base */
191 __u32 loc_arbitr; /* 08h - Local Arbitration */
192 __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */
193 __u32 loc_rom_range; /* 10h - Local ROM Range */
194 __u32 loc_rom_base; /* 14h - Local ROM Base */
195 __u32 loc_bus_descr; /* 18h - Local Bus descriptor */
196 __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */
197 __u32 loc_base_mst; /* 20h - Local Base for Master PCI */
198 __u32 loc_range_io; /* 24h - Local Range for Master IO */
199 __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */
200 __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */
201 __u32 filler1; /* 30h */
202 __u32 filler2; /* 34h */
203 __u32 filler3; /* 38h */
204 __u32 filler4; /* 3Ch */
205 __u32 mail_box_0; /* 40h - Mail Box 0 */
206 __u32 mail_box_1; /* 44h - Mail Box 1 */
207 __u32 mail_box_2; /* 48h - Mail Box 2 */
208 __u32 mail_box_3; /* 4Ch - Mail Box 3 */
209 __u32 filler5; /* 50h */
210 __u32 filler6; /* 54h */
211 __u32 filler7; /* 58h */
212 __u32 filler8; /* 5Ch */
213 __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */
214 __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */
215 __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */
216 __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
217};
218
219/* Values for the Local Base Address re-map register */
220
221#define WIN_RAM 0x00000001L /* set the sliding window to RAM */
222#define WIN_CREG 0x14000001L /* set the window to custom Registers */
223
224/* Values timer select registers */
225
226#define TIMER_BY_1M 0x00 /* clock divided by 1M */
227#define TIMER_BY_256K 0x01 /* clock divided by 256k */
228#define TIMER_BY_128K 0x02 /* clock divided by 128k */
229#define TIMER_BY_32K 0x03 /* clock divided by 32k */
230
231/****************** ****************** *******************/
232#endif
233
234#ifndef ZFIRM_ID
235/* #include "zfwint.h" */
236/****************** ****************** *******************/
237/*
238 * This file contains the definitions for interfacing with the
239 * Cyclom-Z ZFIRM Firmware.
240 */
241
242/* General Constant definitions */
243
244#define MAX_CHAN 64 /* max number of channels per board */
245
246/* firmware id structure (set after boot) */
247
248#define ID_ADDRESS 0x00000180L /* signature/pointer address */
249#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
250#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
251#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
252
253#define ZF_TINACT_DEF 1000 /* default inactivity timeout
254 (1000 ms) */
255#define ZF_TINACT ZF_TINACT_DEF
256
257struct FIRM_ID {
258 __u32 signature; /* ZFIRM/U signature */
259 __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */
260};
261
262/* Op. System id */
263
264#define C_OS_LINUX 0x00000030 /* generic Linux system */
265
266/* channel op_mode */
267
268#define C_CH_DISABLE 0x00000000 /* channel is disabled */
269#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
270#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
271#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
272#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
273
274/* comm_parity - parity */
275
276#define C_PR_NONE 0x00000000 /* None */
277#define C_PR_ODD 0x00000001 /* Odd */
278#define C_PR_EVEN 0x00000002 /* Even */
279#define C_PR_MARK 0x00000004 /* Mark */
280#define C_PR_SPACE 0x00000008 /* Space */
281#define C_PR_PARITY 0x000000ff
282
283#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
284#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
285
286/* comm_data_l - data length and stop bits */
287
288#define C_DL_CS5 0x00000001
289#define C_DL_CS6 0x00000002
290#define C_DL_CS7 0x00000004
291#define C_DL_CS8 0x00000008
292#define C_DL_CS 0x0000000f
293#define C_DL_1STOP 0x00000010
294#define C_DL_15STOP 0x00000020
295#define C_DL_2STOP 0x00000040
296#define C_DL_STOP 0x000000f0
297
298/* interrupt enabling/status */
299
300#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
301#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
302#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
303#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
304#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
305#define C_IN_MDCD 0x00000100 /* modem DCD change */
306#define C_IN_MDSR 0x00000200 /* modem DSR change */
307#define C_IN_MRI 0x00000400 /* modem RI change */
308#define C_IN_MCTS 0x00000800 /* modem CTS change */
309#define C_IN_RXBRK 0x00001000 /* Break received */
310#define C_IN_PR_ERROR 0x00002000 /* parity error */
311#define C_IN_FR_ERROR 0x00004000 /* frame error */
312#define C_IN_OVR_ERROR 0x00008000 /* overrun error */
313#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
314#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
315#define C_IN_MRTS 0x00040000 /* modem RTS drop */
316#define C_IN_ICHAR 0x00080000
317
318/* flow control */
319
320#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
321#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
322#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
323#define C_FL_SWFLOW 0x0000000f
324
325/* flow status */
326
327#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
328#define C_FS_SENDING 0x00000001 /* UART is sending data */
329#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
330
331/* rs_control/rs_status RS-232 signals */
332
333#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
334 IOCTLM command */
335#define C_RS_RTS 0x00000001 /* RTS */
336#define C_RS_DTR 0x00000004 /* DTR */
337#define C_RS_DCD 0x00000100 /* CD */
338#define C_RS_DSR 0x00000200 /* DSR */
339#define C_RS_RI 0x00000400 /* RI */
340#define C_RS_CTS 0x00000800 /* CTS */
341
342/* commands Host <-> Board */
343
344#define C_CM_RESET 0x01 /* reset/flush buffers */
345#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
346#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
347#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
348#define C_CM_SENDXOFF 0x10 /* send Xoff */
349#define C_CM_SENDXON 0x11 /* send Xon */
350#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
351#define C_CM_SENDBRK 0x41 /* send break */
352#define C_CM_INTBACK 0x42 /* Interrupt back */
353#define C_CM_SET_BREAK 0x43 /* Tx break on */
354#define C_CM_CLR_BREAK 0x44 /* Tx break off */
355#define C_CM_CMD_DONE 0x45 /* Previous command done */
356#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
357#define C_CM_TINACT 0x51 /* set inactivity detection */
358#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
359#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
360#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
361#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
362#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
363#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
364#define C_CM_Q_ENABLE 0x58 /* enables queue access from the
365 driver */
366#define C_CM_Q_DISABLE 0x59 /* disables queue access from the
367 driver */
368
369#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
370#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
371#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
372#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
373#define C_CM_TXFEMPTY 0x64
374#define C_CM_ICHAR 0x65
375#define C_CM_MDCD 0x70 /* modem DCD change */
376#define C_CM_MDSR 0x71 /* modem DSR change */
377#define C_CM_MRI 0x72 /* modem RI change */
378#define C_CM_MCTS 0x73 /* modem CTS change */
379#define C_CM_MRTS 0x74 /* modem RTS drop */
380#define C_CM_RXBRK 0x84 /* Break received */
381#define C_CM_PR_ERROR 0x85 /* Parity error */
382#define C_CM_FR_ERROR 0x86 /* Frame error */
383#define C_CM_OVR_ERROR 0x87 /* Overrun error */
384#define C_CM_RXOFL 0x88 /* RX buffer overflow */
385#define C_CM_CMDERROR 0x90 /* command error */
386#define C_CM_FATAL 0x91 /* fatal error */
387#define C_CM_HW_RESET 0x92 /* reset board */
388
389/*
390 * CH_CTRL - This per port structure contains all parameters
391 * that control an specific port. It can be seen as the
392 * configuration registers of a "super-serial-controller".
393 */
394
395struct CH_CTRL {
396 __u32 op_mode; /* operation mode */
397 __u32 intr_enable; /* interrupt masking */
398 __u32 sw_flow; /* SW flow control */
399 __u32 flow_status; /* output flow status */
400 __u32 comm_baud; /* baud rate - numerically specified */
401 __u32 comm_parity; /* parity */
402 __u32 comm_data_l; /* data length/stop */
403 __u32 comm_flags; /* other flags */
404 __u32 hw_flow; /* HW flow control */
405 __u32 rs_control; /* RS-232 outputs */
406 __u32 rs_status; /* RS-232 inputs */
407 __u32 flow_xon; /* xon char */
408 __u32 flow_xoff; /* xoff char */
409 __u32 hw_overflow; /* hw overflow counter */
410 __u32 sw_overflow; /* sw overflow counter */
411 __u32 comm_error; /* frame/parity error counter */
412 __u32 ichar;
413 __u32 filler[7];
414};
415
416
417/*
418 * BUF_CTRL - This per channel structure contains
419 * all Tx and Rx buffer control for a given channel.
420 */
421
422struct BUF_CTRL {
423 __u32 flag_dma; /* buffers are in Host memory */
424 __u32 tx_bufaddr; /* address of the tx buffer */
425 __u32 tx_bufsize; /* tx buffer size */
426 __u32 tx_threshold; /* tx low water mark */
427 __u32 tx_get; /* tail index tx buf */
428 __u32 tx_put; /* head index tx buf */
429 __u32 rx_bufaddr; /* address of the rx buffer */
430 __u32 rx_bufsize; /* rx buffer size */
431 __u32 rx_threshold; /* rx high water mark */
432 __u32 rx_get; /* tail index rx buf */
433 __u32 rx_put; /* head index rx buf */
434 __u32 filler[5]; /* filler to align structures */
435};
436
437/*
438 * BOARD_CTRL - This per board structure contains all global
439 * control fields related to the board.
440 */
441
442struct BOARD_CTRL {
443
444 /* static info provided by the on-board CPU */
445 __u32 n_channel; /* number of channels */
446 __u32 fw_version; /* firmware version */
447
448 /* static info provided by the driver */
449 __u32 op_system; /* op_system id */
450 __u32 dr_version; /* driver version */
451
452 /* board control area */
453 __u32 inactivity; /* inactivity control */
454
455 /* host to FW commands */
456 __u32 hcmd_channel; /* channel number */
457 __u32 hcmd_param; /* pointer to parameters */
458
459 /* FW to Host commands */
460 __u32 fwcmd_channel; /* channel number */
461 __u32 fwcmd_param; /* pointer to parameters */
462 __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */
463
464 /* filler so the structures are aligned */
465 __u32 filler[6];
466};
467
468/* Host Interrupt Queue */
469
470#define QUEUE_SIZE (10*MAX_CHAN)
471
472struct INT_QUEUE {
473 unsigned char intr_code[QUEUE_SIZE];
474 unsigned long channel[QUEUE_SIZE];
475 unsigned long param[QUEUE_SIZE];
476 unsigned long put;
477 unsigned long get;
478};
479
480/*
481 * ZFW_CTRL - This is the data structure that includes all other
482 * data structures used by the Firmware.
483 */
484
485struct ZFW_CTRL {
486 struct BOARD_CTRL board_ctrl;
487 struct CH_CTRL ch_ctrl[MAX_CHAN];
488 struct BUF_CTRL buf_ctrl[MAX_CHAN];
489};
490
491/****************** ****************** *******************/
492#endif
493
494#endif /* _UAPI_LINUX_CYCLADES_H */
Linux 6.x block layer and io_uring tree(s)