Commit | Line | Data |
---|---|---|
e2be04c7 | 1 | /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ |
3132583e HV |
2 | /* |
3 | * cec - HDMI Consumer Electronics Control public header | |
4 | * | |
5 | * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved. | |
3132583e HV |
6 | */ |
7 | ||
3132583e HV |
8 | #ifndef _CEC_UAPI_H |
9 | #define _CEC_UAPI_H | |
10 | ||
11 | #include <linux/types.h> | |
3145c754 | 12 | #include <linux/string.h> |
3132583e HV |
13 | |
14 | #define CEC_MAX_MSG_SIZE 16 | |
15 | ||
16 | /** | |
17 | * struct cec_msg - CEC message structure. | |
980e0b36 HV |
18 | * @tx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the |
19 | * driver when the message transmission has finished. | |
20 | * @rx_ts: Timestamp in nanoseconds using CLOCK_MONOTONIC. Set by the | |
21 | * driver when the message was received. | |
3132583e HV |
22 | * @len: Length in bytes of the message. |
23 | * @timeout: The timeout (in ms) that is used to timeout CEC_RECEIVE. | |
24 | * Set to 0 if you want to wait forever. This timeout can also be | |
25 | * used with CEC_TRANSMIT as the timeout for waiting for a reply. | |
26 | * If 0, then it will use a 1 second timeout instead of waiting | |
27 | * forever as is done with CEC_RECEIVE. | |
28 | * @sequence: The framework assigns a sequence number to messages that are | |
29 | * sent. This can be used to track replies to previously sent | |
30 | * messages. | |
31 | * @flags: Set to 0. | |
3132583e HV |
32 | * @msg: The message payload. |
33 | * @reply: This field is ignored with CEC_RECEIVE and is only used by | |
34 | * CEC_TRANSMIT. If non-zero, then wait for a reply with this | |
35 | * opcode. Set to CEC_MSG_FEATURE_ABORT if you want to wait for | |
36 | * a possible ABORT reply. If there was an error when sending the | |
37 | * msg or FeatureAbort was returned, then reply is set to 0. | |
38 | * If reply is non-zero upon return, then len/msg are set to | |
39 | * the received message. | |
40 | * If reply is zero upon return and status has the | |
41 | * CEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to | |
42 | * the received feature abort message. | |
43 | * If reply is zero upon return and status has the | |
44 | * CEC_TX_STATUS_MAX_RETRIES bit set, then no reply was seen at | |
45 | * all. If reply is non-zero for CEC_TRANSMIT and the message is a | |
46 | * broadcast, then -EINVAL is returned. | |
47 | * if reply is non-zero, then timeout is set to 1000 (the required | |
48 | * maximum response time). | |
980e0b36 HV |
49 | * @rx_status: The message receive status bits. Set by the driver. |
50 | * @tx_status: The message transmit status bits. Set by the driver. | |
3132583e HV |
51 | * @tx_arb_lost_cnt: The number of 'Arbitration Lost' events. Set by the driver. |
52 | * @tx_nack_cnt: The number of 'Not Acknowledged' events. Set by the driver. | |
53 | * @tx_low_drive_cnt: The number of 'Low Drive Detected' events. Set by the | |
54 | * driver. | |
55 | * @tx_error_cnt: The number of 'Error' events. Set by the driver. | |
56 | */ | |
57 | struct cec_msg { | |
980e0b36 HV |
58 | __u64 tx_ts; |
59 | __u64 rx_ts; | |
3132583e HV |
60 | __u32 len; |
61 | __u32 timeout; | |
62 | __u32 sequence; | |
63 | __u32 flags; | |
3132583e HV |
64 | __u8 msg[CEC_MAX_MSG_SIZE]; |
65 | __u8 reply; | |
980e0b36 HV |
66 | __u8 rx_status; |
67 | __u8 tx_status; | |
3132583e HV |
68 | __u8 tx_arb_lost_cnt; |
69 | __u8 tx_nack_cnt; | |
70 | __u8 tx_low_drive_cnt; | |
71 | __u8 tx_error_cnt; | |
72 | }; | |
73 | ||
74 | /** | |
75 | * cec_msg_initiator - return the initiator's logical address. | |
76 | * @msg: the message structure | |
77 | */ | |
78 | static inline __u8 cec_msg_initiator(const struct cec_msg *msg) | |
79 | { | |
80 | return msg->msg[0] >> 4; | |
81 | } | |
82 | ||
83 | /** | |
84 | * cec_msg_destination - return the destination's logical address. | |
85 | * @msg: the message structure | |
86 | */ | |
87 | static inline __u8 cec_msg_destination(const struct cec_msg *msg) | |
88 | { | |
89 | return msg->msg[0] & 0xf; | |
90 | } | |
91 | ||
92 | /** | |
93 | * cec_msg_opcode - return the opcode of the message, -1 for poll | |
94 | * @msg: the message structure | |
95 | */ | |
96 | static inline int cec_msg_opcode(const struct cec_msg *msg) | |
97 | { | |
98 | return msg->len > 1 ? msg->msg[1] : -1; | |
99 | } | |
100 | ||
101 | /** | |
102 | * cec_msg_is_broadcast - return true if this is a broadcast message. | |
103 | * @msg: the message structure | |
104 | */ | |
3145c754 | 105 | static inline int cec_msg_is_broadcast(const struct cec_msg *msg) |
3132583e HV |
106 | { |
107 | return (msg->msg[0] & 0xf) == 0xf; | |
108 | } | |
109 | ||
110 | /** | |
111 | * cec_msg_init - initialize the message structure. | |
112 | * @msg: the message structure | |
113 | * @initiator: the logical address of the initiator | |
114 | * @destination:the logical address of the destination (0xf for broadcast) | |
115 | * | |
116 | * The whole structure is zeroed, the len field is set to 1 (i.e. a poll | |
117 | * message) and the initiator and destination are filled in. | |
118 | */ | |
119 | static inline void cec_msg_init(struct cec_msg *msg, | |
120 | __u8 initiator, __u8 destination) | |
121 | { | |
122 | memset(msg, 0, sizeof(*msg)); | |
123 | msg->msg[0] = (initiator << 4) | destination; | |
124 | msg->len = 1; | |
125 | } | |
126 | ||
127 | /** | |
128 | * cec_msg_set_reply_to - fill in destination/initiator in a reply message. | |
129 | * @msg: the message structure for the reply | |
130 | * @orig: the original message structure | |
131 | * | |
132 | * Set the msg destination to the orig initiator and the msg initiator to the | |
133 | * orig destination. Note that msg and orig may be the same pointer, in which | |
134 | * case the change is done in place. | |
135 | */ | |
136 | static inline void cec_msg_set_reply_to(struct cec_msg *msg, | |
137 | struct cec_msg *orig) | |
138 | { | |
139 | /* The destination becomes the initiator and vice versa */ | |
140 | msg->msg[0] = (cec_msg_destination(orig) << 4) | | |
141 | cec_msg_initiator(orig); | |
142 | msg->reply = msg->timeout = 0; | |
143 | } | |
144 | ||
567f882a HV |
145 | /** |
146 | * cec_msg_recv_is_tx_result - return true if this message contains the | |
147 | * result of an earlier non-blocking transmit | |
148 | * @msg: the message structure from CEC_RECEIVE | |
149 | */ | |
150 | static inline int cec_msg_recv_is_tx_result(const struct cec_msg *msg) | |
151 | { | |
152 | return msg->sequence && msg->tx_status && !msg->rx_status; | |
153 | } | |
154 | ||
155 | /** | |
156 | * cec_msg_recv_is_rx_result - return true if this message contains the | |
157 | * reply of an earlier non-blocking transmit | |
158 | * @msg: the message structure from CEC_RECEIVE | |
159 | */ | |
160 | static inline int cec_msg_recv_is_rx_result(const struct cec_msg *msg) | |
161 | { | |
162 | return msg->sequence && !msg->tx_status && msg->rx_status; | |
163 | } | |
164 | ||
adc0c622 HV |
165 | /* cec_msg flags field */ |
166 | #define CEC_MSG_FL_REPLY_TO_FOLLOWERS (1 << 0) | |
aa50accf | 167 | #define CEC_MSG_FL_RAW (1 << 1) |
adc0c622 HV |
168 | |
169 | /* cec_msg tx/rx_status field */ | |
3132583e HV |
170 | #define CEC_TX_STATUS_OK (1 << 0) |
171 | #define CEC_TX_STATUS_ARB_LOST (1 << 1) | |
172 | #define CEC_TX_STATUS_NACK (1 << 2) | |
173 | #define CEC_TX_STATUS_LOW_DRIVE (1 << 3) | |
174 | #define CEC_TX_STATUS_ERROR (1 << 4) | |
175 | #define CEC_TX_STATUS_MAX_RETRIES (1 << 5) | |
7ec2b3b9 HV |
176 | #define CEC_TX_STATUS_ABORTED (1 << 6) |
177 | #define CEC_TX_STATUS_TIMEOUT (1 << 7) | |
3132583e HV |
178 | |
179 | #define CEC_RX_STATUS_OK (1 << 0) | |
180 | #define CEC_RX_STATUS_TIMEOUT (1 << 1) | |
181 | #define CEC_RX_STATUS_FEATURE_ABORT (1 << 2) | |
7ec2b3b9 | 182 | #define CEC_RX_STATUS_ABORTED (1 << 3) |
3132583e | 183 | |
3145c754 | 184 | static inline int cec_msg_status_is_ok(const struct cec_msg *msg) |
3132583e HV |
185 | { |
186 | if (msg->tx_status && !(msg->tx_status & CEC_TX_STATUS_OK)) | |
3145c754 | 187 | return 0; |
3132583e | 188 | if (msg->rx_status && !(msg->rx_status & CEC_RX_STATUS_OK)) |
3145c754 | 189 | return 0; |
3132583e | 190 | if (!msg->tx_status && !msg->rx_status) |
3145c754 | 191 | return 0; |
3132583e HV |
192 | return !(msg->rx_status & CEC_RX_STATUS_FEATURE_ABORT); |
193 | } | |
194 | ||
195 | #define CEC_LOG_ADDR_INVALID 0xff | |
196 | #define CEC_PHYS_ADDR_INVALID 0xffff | |
197 | ||
198 | /* | |
199 | * The maximum number of logical addresses one device can be assigned to. | |
200 | * The CEC 2.0 spec allows for only 2 logical addresses at the moment. The | |
201 | * Analog Devices CEC hardware supports 3. So let's go wild and go for 4. | |
202 | */ | |
203 | #define CEC_MAX_LOG_ADDRS 4 | |
204 | ||
205 | /* The logical addresses defined by CEC 2.0 */ | |
206 | #define CEC_LOG_ADDR_TV 0 | |
207 | #define CEC_LOG_ADDR_RECORD_1 1 | |
208 | #define CEC_LOG_ADDR_RECORD_2 2 | |
209 | #define CEC_LOG_ADDR_TUNER_1 3 | |
210 | #define CEC_LOG_ADDR_PLAYBACK_1 4 | |
211 | #define CEC_LOG_ADDR_AUDIOSYSTEM 5 | |
212 | #define CEC_LOG_ADDR_TUNER_2 6 | |
213 | #define CEC_LOG_ADDR_TUNER_3 7 | |
214 | #define CEC_LOG_ADDR_PLAYBACK_2 8 | |
215 | #define CEC_LOG_ADDR_RECORD_3 9 | |
216 | #define CEC_LOG_ADDR_TUNER_4 10 | |
217 | #define CEC_LOG_ADDR_PLAYBACK_3 11 | |
218 | #define CEC_LOG_ADDR_BACKUP_1 12 | |
219 | #define CEC_LOG_ADDR_BACKUP_2 13 | |
220 | #define CEC_LOG_ADDR_SPECIFIC 14 | |
221 | #define CEC_LOG_ADDR_UNREGISTERED 15 /* as initiator address */ | |
6e9b73c6 | 222 | #define CEC_LOG_ADDR_BROADCAST 15 /* as destination address */ |
3132583e HV |
223 | |
224 | /* The logical address types that the CEC device wants to claim */ | |
225 | #define CEC_LOG_ADDR_TYPE_TV 0 | |
226 | #define CEC_LOG_ADDR_TYPE_RECORD 1 | |
227 | #define CEC_LOG_ADDR_TYPE_TUNER 2 | |
228 | #define CEC_LOG_ADDR_TYPE_PLAYBACK 3 | |
229 | #define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM 4 | |
230 | #define CEC_LOG_ADDR_TYPE_SPECIFIC 5 | |
231 | #define CEC_LOG_ADDR_TYPE_UNREGISTERED 6 | |
232 | /* | |
233 | * Switches should use UNREGISTERED. | |
234 | * Processors should use SPECIFIC. | |
235 | */ | |
236 | ||
237 | #define CEC_LOG_ADDR_MASK_TV (1 << CEC_LOG_ADDR_TV) | |
238 | #define CEC_LOG_ADDR_MASK_RECORD ((1 << CEC_LOG_ADDR_RECORD_1) | \ | |
239 | (1 << CEC_LOG_ADDR_RECORD_2) | \ | |
240 | (1 << CEC_LOG_ADDR_RECORD_3)) | |
241 | #define CEC_LOG_ADDR_MASK_TUNER ((1 << CEC_LOG_ADDR_TUNER_1) | \ | |
242 | (1 << CEC_LOG_ADDR_TUNER_2) | \ | |
243 | (1 << CEC_LOG_ADDR_TUNER_3) | \ | |
244 | (1 << CEC_LOG_ADDR_TUNER_4)) | |
245 | #define CEC_LOG_ADDR_MASK_PLAYBACK ((1 << CEC_LOG_ADDR_PLAYBACK_1) | \ | |
246 | (1 << CEC_LOG_ADDR_PLAYBACK_2) | \ | |
247 | (1 << CEC_LOG_ADDR_PLAYBACK_3)) | |
248 | #define CEC_LOG_ADDR_MASK_AUDIOSYSTEM (1 << CEC_LOG_ADDR_AUDIOSYSTEM) | |
249 | #define CEC_LOG_ADDR_MASK_BACKUP ((1 << CEC_LOG_ADDR_BACKUP_1) | \ | |
250 | (1 << CEC_LOG_ADDR_BACKUP_2)) | |
251 | #define CEC_LOG_ADDR_MASK_SPECIFIC (1 << CEC_LOG_ADDR_SPECIFIC) | |
252 | #define CEC_LOG_ADDR_MASK_UNREGISTERED (1 << CEC_LOG_ADDR_UNREGISTERED) | |
253 | ||
3145c754 | 254 | static inline int cec_has_tv(__u16 log_addr_mask) |
3132583e HV |
255 | { |
256 | return log_addr_mask & CEC_LOG_ADDR_MASK_TV; | |
257 | } | |
258 | ||
3145c754 | 259 | static inline int cec_has_record(__u16 log_addr_mask) |
3132583e HV |
260 | { |
261 | return log_addr_mask & CEC_LOG_ADDR_MASK_RECORD; | |
262 | } | |
263 | ||
3145c754 | 264 | static inline int cec_has_tuner(__u16 log_addr_mask) |
3132583e HV |
265 | { |
266 | return log_addr_mask & CEC_LOG_ADDR_MASK_TUNER; | |
267 | } | |
268 | ||
3145c754 | 269 | static inline int cec_has_playback(__u16 log_addr_mask) |
3132583e HV |
270 | { |
271 | return log_addr_mask & CEC_LOG_ADDR_MASK_PLAYBACK; | |
272 | } | |
273 | ||
3145c754 | 274 | static inline int cec_has_audiosystem(__u16 log_addr_mask) |
3132583e HV |
275 | { |
276 | return log_addr_mask & CEC_LOG_ADDR_MASK_AUDIOSYSTEM; | |
277 | } | |
278 | ||
3145c754 | 279 | static inline int cec_has_backup(__u16 log_addr_mask) |
3132583e HV |
280 | { |
281 | return log_addr_mask & CEC_LOG_ADDR_MASK_BACKUP; | |
282 | } | |
283 | ||
3145c754 | 284 | static inline int cec_has_specific(__u16 log_addr_mask) |
3132583e HV |
285 | { |
286 | return log_addr_mask & CEC_LOG_ADDR_MASK_SPECIFIC; | |
287 | } | |
288 | ||
3145c754 | 289 | static inline int cec_is_unregistered(__u16 log_addr_mask) |
3132583e HV |
290 | { |
291 | return log_addr_mask & CEC_LOG_ADDR_MASK_UNREGISTERED; | |
292 | } | |
293 | ||
3145c754 | 294 | static inline int cec_is_unconfigured(__u16 log_addr_mask) |
3132583e HV |
295 | { |
296 | return log_addr_mask == 0; | |
297 | } | |
298 | ||
299 | /* | |
300 | * Use this if there is no vendor ID (CEC_G_VENDOR_ID) or if the vendor ID | |
301 | * should be disabled (CEC_S_VENDOR_ID) | |
302 | */ | |
303 | #define CEC_VENDOR_ID_NONE 0xffffffff | |
304 | ||
305 | /* The message handling modes */ | |
306 | /* Modes for initiator */ | |
307 | #define CEC_MODE_NO_INITIATOR (0x0 << 0) | |
308 | #define CEC_MODE_INITIATOR (0x1 << 0) | |
309 | #define CEC_MODE_EXCL_INITIATOR (0x2 << 0) | |
310 | #define CEC_MODE_INITIATOR_MSK 0x0f | |
311 | ||
312 | /* Modes for follower */ | |
313 | #define CEC_MODE_NO_FOLLOWER (0x0 << 4) | |
314 | #define CEC_MODE_FOLLOWER (0x1 << 4) | |
315 | #define CEC_MODE_EXCL_FOLLOWER (0x2 << 4) | |
316 | #define CEC_MODE_EXCL_FOLLOWER_PASSTHRU (0x3 << 4) | |
6303d978 | 317 | #define CEC_MODE_MONITOR_PIN (0xd << 4) |
3132583e HV |
318 | #define CEC_MODE_MONITOR (0xe << 4) |
319 | #define CEC_MODE_MONITOR_ALL (0xf << 4) | |
320 | #define CEC_MODE_FOLLOWER_MSK 0xf0 | |
321 | ||
322 | /* Userspace has to configure the physical address */ | |
323 | #define CEC_CAP_PHYS_ADDR (1 << 0) | |
324 | /* Userspace has to configure the logical addresses */ | |
325 | #define CEC_CAP_LOG_ADDRS (1 << 1) | |
326 | /* Userspace can transmit messages (and thus become follower as well) */ | |
327 | #define CEC_CAP_TRANSMIT (1 << 2) | |
328 | /* | |
329 | * Passthrough all messages instead of processing them. | |
330 | */ | |
331 | #define CEC_CAP_PASSTHROUGH (1 << 3) | |
332 | /* Supports remote control */ | |
333 | #define CEC_CAP_RC (1 << 4) | |
334 | /* Hardware can monitor all messages, not just directed and broadcast. */ | |
335 | #define CEC_CAP_MONITOR_ALL (1 << 5) | |
f902c1e9 HV |
336 | /* Hardware can use CEC only if the HDMI HPD pin is high. */ |
337 | #define CEC_CAP_NEEDS_HPD (1 << 6) | |
6303d978 HV |
338 | /* Hardware can monitor CEC pin transitions */ |
339 | #define CEC_CAP_MONITOR_PIN (1 << 7) | |
9098c1c2 DM |
340 | /* CEC_ADAP_G_CONNECTOR_INFO is available */ |
341 | #define CEC_CAP_CONNECTOR_INFO (1 << 8) | |
3132583e HV |
342 | |
343 | /** | |
344 | * struct cec_caps - CEC capabilities structure. | |
345 | * @driver: name of the CEC device driver. | |
346 | * @name: name of the CEC device. @driver + @name must be unique. | |
347 | * @available_log_addrs: number of available logical addresses. | |
348 | * @capabilities: capabilities of the CEC adapter. | |
349 | * @version: version of the CEC adapter framework. | |
350 | */ | |
351 | struct cec_caps { | |
352 | char driver[32]; | |
353 | char name[32]; | |
354 | __u32 available_log_addrs; | |
355 | __u32 capabilities; | |
356 | __u32 version; | |
357 | }; | |
358 | ||
359 | /** | |
360 | * struct cec_log_addrs - CEC logical addresses structure. | |
361 | * @log_addr: the claimed logical addresses. Set by the driver. | |
362 | * @log_addr_mask: current logical address mask. Set by the driver. | |
363 | * @cec_version: the CEC version that the adapter should implement. Set by the | |
364 | * caller. | |
365 | * @num_log_addrs: how many logical addresses should be claimed. Set by the | |
366 | * caller. | |
367 | * @vendor_id: the vendor ID of the device. Set by the caller. | |
dcceb1ea | 368 | * @flags: flags. |
3132583e HV |
369 | * @osd_name: the OSD name of the device. Set by the caller. |
370 | * @primary_device_type: the primary device type for each logical address. | |
371 | * Set by the caller. | |
372 | * @log_addr_type: the logical address types. Set by the caller. | |
373 | * @all_device_types: CEC 2.0: all device types represented by the logical | |
374 | * address. Set by the caller. | |
375 | * @features: CEC 2.0: The logical address features. Set by the caller. | |
376 | */ | |
377 | struct cec_log_addrs { | |
378 | __u8 log_addr[CEC_MAX_LOG_ADDRS]; | |
379 | __u16 log_addr_mask; | |
380 | __u8 cec_version; | |
381 | __u8 num_log_addrs; | |
382 | __u32 vendor_id; | |
383 | __u32 flags; | |
384 | char osd_name[15]; | |
385 | __u8 primary_device_type[CEC_MAX_LOG_ADDRS]; | |
386 | __u8 log_addr_type[CEC_MAX_LOG_ADDRS]; | |
387 | ||
388 | /* CEC 2.0 */ | |
389 | __u8 all_device_types[CEC_MAX_LOG_ADDRS]; | |
390 | __u8 features[CEC_MAX_LOG_ADDRS][12]; | |
391 | }; | |
392 | ||
dcceb1ea HV |
393 | /* Allow a fallback to unregistered */ |
394 | #define CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK (1 << 0) | |
f4062625 HV |
395 | /* Passthrough RC messages to the input subsystem */ |
396 | #define CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU (1 << 1) | |
a69a168a HV |
397 | /* CDC-Only device: supports only CDC messages */ |
398 | #define CEC_LOG_ADDRS_FL_CDC_ONLY (1 << 2) | |
dcceb1ea | 399 | |
9098c1c2 DM |
400 | /** |
401 | * struct cec_drm_connector_info - tells which drm connector is | |
402 | * associated with the CEC adapter. | |
403 | * @card_no: drm card number | |
404 | * @connector_id: drm connector ID | |
405 | */ | |
406 | struct cec_drm_connector_info { | |
407 | __u32 card_no; | |
408 | __u32 connector_id; | |
409 | }; | |
410 | ||
411 | #define CEC_CONNECTOR_TYPE_NO_CONNECTOR 0 | |
412 | #define CEC_CONNECTOR_TYPE_DRM 1 | |
413 | ||
414 | /** | |
415 | * struct cec_connector_info - tells if and which connector is | |
416 | * associated with the CEC adapter. | |
417 | * @type: connector type (if any) | |
418 | * @drm: drm connector info | |
f12b81e4 | 419 | * @raw: array to pad the union |
9098c1c2 DM |
420 | */ |
421 | struct cec_connector_info { | |
422 | __u32 type; | |
423 | union { | |
424 | struct cec_drm_connector_info drm; | |
425 | __u32 raw[16]; | |
426 | }; | |
427 | }; | |
428 | ||
3132583e HV |
429 | /* Events */ |
430 | ||
431 | /* Event that occurs when the adapter state changes */ | |
432 | #define CEC_EVENT_STATE_CHANGE 1 | |
433 | /* | |
434 | * This event is sent when messages are lost because the application | |
435 | * didn't empty the message queue in time | |
436 | */ | |
437 | #define CEC_EVENT_LOST_MSGS 2 | |
9a6b2a87 HV |
438 | #define CEC_EVENT_PIN_CEC_LOW 3 |
439 | #define CEC_EVENT_PIN_CEC_HIGH 4 | |
333ef6bd HV |
440 | #define CEC_EVENT_PIN_HPD_LOW 5 |
441 | #define CEC_EVENT_PIN_HPD_HIGH 6 | |
f48a534a HV |
442 | #define CEC_EVENT_PIN_5V_LOW 7 |
443 | #define CEC_EVENT_PIN_5V_HIGH 8 | |
3132583e HV |
444 | |
445 | #define CEC_EVENT_FL_INITIAL_STATE (1 << 0) | |
6b2bbb08 | 446 | #define CEC_EVENT_FL_DROPPED_EVENTS (1 << 1) |
3132583e HV |
447 | |
448 | /** | |
449 | * struct cec_event_state_change - used when the CEC adapter changes state. | |
450 | * @phys_addr: the current physical address | |
451 | * @log_addr_mask: the current logical address mask | |
9098c1c2 DM |
452 | * @have_conn_info: if non-zero, then HDMI connector information is available. |
453 | * This field is only valid if CEC_CAP_CONNECTOR_INFO is set. If that | |
454 | * capability is set and @have_conn_info is zero, then that indicates | |
455 | * that the HDMI connector device is not instantiated, either because | |
456 | * the HDMI driver is still configuring the device or because the HDMI | |
457 | * device was unbound. | |
3132583e HV |
458 | */ |
459 | struct cec_event_state_change { | |
460 | __u16 phys_addr; | |
461 | __u16 log_addr_mask; | |
9098c1c2 | 462 | __u16 have_conn_info; |
3132583e HV |
463 | }; |
464 | ||
465 | /** | |
6b2bbb08 | 466 | * struct cec_event_lost_msgs - tells you how many messages were lost. |
3132583e HV |
467 | * @lost_msgs: how many messages were lost. |
468 | */ | |
469 | struct cec_event_lost_msgs { | |
470 | __u32 lost_msgs; | |
471 | }; | |
472 | ||
473 | /** | |
474 | * struct cec_event - CEC event structure | |
475 | * @ts: the timestamp of when the event was sent. | |
476 | * @event: the event. | |
f12b81e4 | 477 | * @flags: event flags. |
3132583e HV |
478 | * @state_change: the event payload for CEC_EVENT_STATE_CHANGE. |
479 | * @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS. | |
480 | * @raw: array to pad the union. | |
481 | */ | |
482 | struct cec_event { | |
483 | __u64 ts; | |
484 | __u32 event; | |
485 | __u32 flags; | |
486 | union { | |
487 | struct cec_event_state_change state_change; | |
488 | struct cec_event_lost_msgs lost_msgs; | |
489 | __u32 raw[16]; | |
490 | }; | |
491 | }; | |
492 | ||
493 | /* ioctls */ | |
494 | ||
495 | /* Adapter capabilities */ | |
496 | #define CEC_ADAP_G_CAPS _IOWR('a', 0, struct cec_caps) | |
497 | ||
498 | /* | |
499 | * phys_addr is either 0 (if this is the CEC root device) | |
500 | * or a valid physical address obtained from the sink's EDID | |
501 | * as read by this CEC device (if this is a source device) | |
502 | * or a physical address obtained and modified from a sink | |
503 | * EDID and used for a sink CEC device. | |
504 | * If nothing is connected, then phys_addr is 0xffff. | |
505 | * See HDMI 1.4b, section 8.7 (Physical Address). | |
506 | * | |
507 | * The CEC_ADAP_S_PHYS_ADDR ioctl may not be available if that is handled | |
508 | * internally. | |
509 | */ | |
510 | #define CEC_ADAP_G_PHYS_ADDR _IOR('a', 1, __u16) | |
511 | #define CEC_ADAP_S_PHYS_ADDR _IOW('a', 2, __u16) | |
512 | ||
513 | /* | |
514 | * Configure the CEC adapter. It sets the device type and which | |
515 | * logical types it will try to claim. It will return which | |
516 | * logical addresses it could actually claim. | |
517 | * An error is returned if the adapter is disabled or if there | |
518 | * is no physical address assigned. | |
519 | */ | |
520 | ||
521 | #define CEC_ADAP_G_LOG_ADDRS _IOR('a', 3, struct cec_log_addrs) | |
522 | #define CEC_ADAP_S_LOG_ADDRS _IOWR('a', 4, struct cec_log_addrs) | |
523 | ||
524 | /* Transmit/receive a CEC command */ | |
525 | #define CEC_TRANSMIT _IOWR('a', 5, struct cec_msg) | |
526 | #define CEC_RECEIVE _IOWR('a', 6, struct cec_msg) | |
527 | ||
528 | /* Dequeue CEC events */ | |
529 | #define CEC_DQEVENT _IOWR('a', 7, struct cec_event) | |
530 | ||
531 | /* | |
532 | * Get and set the message handling mode for this filehandle. | |
533 | */ | |
534 | #define CEC_G_MODE _IOR('a', 8, __u32) | |
535 | #define CEC_S_MODE _IOW('a', 9, __u32) | |
536 | ||
9098c1c2 DM |
537 | /* Get the connector info */ |
538 | #define CEC_ADAP_G_CONNECTOR_INFO _IOR('a', 10, struct cec_connector_info) | |
539 | ||
3132583e HV |
540 | /* |
541 | * The remainder of this header defines all CEC messages and operands. | |
542 | * The format matters since it the cec-ctl utility parses it to generate | |
543 | * code for implementing all these messages. | |
544 | * | |
545 | * Comments ending with 'Feature' group messages for each feature. | |
546 | * If messages are part of multiple features, then the "Has also" | |
547 | * comment is used to list the previously defined messages that are | |
548 | * supported by the feature. | |
549 | * | |
550 | * Before operands are defined a comment is added that gives the | |
551 | * name of the operand and in brackets the variable name of the | |
552 | * corresponding argument in the cec-funcs.h function. | |
553 | */ | |
554 | ||
555 | /* Messages */ | |
556 | ||
557 | /* One Touch Play Feature */ | |
558 | #define CEC_MSG_ACTIVE_SOURCE 0x82 | |
559 | #define CEC_MSG_IMAGE_VIEW_ON 0x04 | |
560 | #define CEC_MSG_TEXT_VIEW_ON 0x0d | |
561 | ||
562 | ||
563 | /* Routing Control Feature */ | |
564 | ||
565 | /* | |
566 | * Has also: | |
567 | * CEC_MSG_ACTIVE_SOURCE | |
568 | */ | |
569 | ||
570 | #define CEC_MSG_INACTIVE_SOURCE 0x9d | |
571 | #define CEC_MSG_REQUEST_ACTIVE_SOURCE 0x85 | |
572 | #define CEC_MSG_ROUTING_CHANGE 0x80 | |
573 | #define CEC_MSG_ROUTING_INFORMATION 0x81 | |
574 | #define CEC_MSG_SET_STREAM_PATH 0x86 | |
575 | ||
576 | ||
577 | /* Standby Feature */ | |
578 | #define CEC_MSG_STANDBY 0x36 | |
579 | ||
580 | ||
581 | /* One Touch Record Feature */ | |
582 | #define CEC_MSG_RECORD_OFF 0x0b | |
583 | #define CEC_MSG_RECORD_ON 0x09 | |
584 | /* Record Source Type Operand (rec_src_type) */ | |
585 | #define CEC_OP_RECORD_SRC_OWN 1 | |
586 | #define CEC_OP_RECORD_SRC_DIGITAL 2 | |
587 | #define CEC_OP_RECORD_SRC_ANALOG 3 | |
588 | #define CEC_OP_RECORD_SRC_EXT_PLUG 4 | |
589 | #define CEC_OP_RECORD_SRC_EXT_PHYS_ADDR 5 | |
590 | /* Service Identification Method Operand (service_id_method) */ | |
591 | #define CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID 0 | |
592 | #define CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL 1 | |
593 | /* Digital Service Broadcast System Operand (dig_bcast_system) */ | |
594 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_GEN 0x00 | |
595 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN 0x01 | |
596 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_GEN 0x02 | |
597 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_BS 0x08 | |
598 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_CS 0x09 | |
599 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_T 0x0a | |
600 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE 0x10 | |
601 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT 0x11 | |
602 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T 0x12 | |
603 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_C 0x18 | |
604 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S 0x19 | |
605 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S2 0x1a | |
606 | #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_T 0x1b | |
607 | /* Analogue Broadcast Type Operand (ana_bcast_type) */ | |
608 | #define CEC_OP_ANA_BCAST_TYPE_CABLE 0 | |
609 | #define CEC_OP_ANA_BCAST_TYPE_SATELLITE 1 | |
610 | #define CEC_OP_ANA_BCAST_TYPE_TERRESTRIAL 2 | |
611 | /* Broadcast System Operand (bcast_system) */ | |
612 | #define CEC_OP_BCAST_SYSTEM_PAL_BG 0x00 | |
613 | #define CEC_OP_BCAST_SYSTEM_SECAM_LQ 0x01 /* SECAM L' */ | |
614 | #define CEC_OP_BCAST_SYSTEM_PAL_M 0x02 | |
615 | #define CEC_OP_BCAST_SYSTEM_NTSC_M 0x03 | |
616 | #define CEC_OP_BCAST_SYSTEM_PAL_I 0x04 | |
617 | #define CEC_OP_BCAST_SYSTEM_SECAM_DK 0x05 | |
618 | #define CEC_OP_BCAST_SYSTEM_SECAM_BG 0x06 | |
619 | #define CEC_OP_BCAST_SYSTEM_SECAM_L 0x07 | |
620 | #define CEC_OP_BCAST_SYSTEM_PAL_DK 0x08 | |
621 | #define CEC_OP_BCAST_SYSTEM_OTHER 0x1f | |
622 | /* Channel Number Format Operand (channel_number_fmt) */ | |
623 | #define CEC_OP_CHANNEL_NUMBER_FMT_1_PART 0x01 | |
624 | #define CEC_OP_CHANNEL_NUMBER_FMT_2_PART 0x02 | |
625 | ||
626 | #define CEC_MSG_RECORD_STATUS 0x0a | |
627 | /* Record Status Operand (rec_status) */ | |
628 | #define CEC_OP_RECORD_STATUS_CUR_SRC 0x01 | |
629 | #define CEC_OP_RECORD_STATUS_DIG_SERVICE 0x02 | |
630 | #define CEC_OP_RECORD_STATUS_ANA_SERVICE 0x03 | |
631 | #define CEC_OP_RECORD_STATUS_EXT_INPUT 0x04 | |
632 | #define CEC_OP_RECORD_STATUS_NO_DIG_SERVICE 0x05 | |
633 | #define CEC_OP_RECORD_STATUS_NO_ANA_SERVICE 0x06 | |
634 | #define CEC_OP_RECORD_STATUS_NO_SERVICE 0x07 | |
635 | #define CEC_OP_RECORD_STATUS_INVALID_EXT_PLUG 0x09 | |
636 | #define CEC_OP_RECORD_STATUS_INVALID_EXT_PHYS_ADDR 0x0a | |
637 | #define CEC_OP_RECORD_STATUS_UNSUP_CA 0x0b | |
638 | #define CEC_OP_RECORD_STATUS_NO_CA_ENTITLEMENTS 0x0c | |
639 | #define CEC_OP_RECORD_STATUS_CANT_COPY_SRC 0x0d | |
640 | #define CEC_OP_RECORD_STATUS_NO_MORE_COPIES 0x0e | |
641 | #define CEC_OP_RECORD_STATUS_NO_MEDIA 0x10 | |
642 | #define CEC_OP_RECORD_STATUS_PLAYING 0x11 | |
643 | #define CEC_OP_RECORD_STATUS_ALREADY_RECORDING 0x12 | |
644 | #define CEC_OP_RECORD_STATUS_MEDIA_PROT 0x13 | |
645 | #define CEC_OP_RECORD_STATUS_NO_SIGNAL 0x14 | |
646 | #define CEC_OP_RECORD_STATUS_MEDIA_PROBLEM 0x15 | |
647 | #define CEC_OP_RECORD_STATUS_NO_SPACE 0x16 | |
648 | #define CEC_OP_RECORD_STATUS_PARENTAL_LOCK 0x17 | |
649 | #define CEC_OP_RECORD_STATUS_TERMINATED_OK 0x1a | |
650 | #define CEC_OP_RECORD_STATUS_ALREADY_TERM 0x1b | |
651 | #define CEC_OP_RECORD_STATUS_OTHER 0x1f | |
652 | ||
653 | #define CEC_MSG_RECORD_TV_SCREEN 0x0f | |
654 | ||
655 | ||
656 | /* Timer Programming Feature */ | |
657 | #define CEC_MSG_CLEAR_ANALOGUE_TIMER 0x33 | |
658 | /* Recording Sequence Operand (recording_seq) */ | |
659 | #define CEC_OP_REC_SEQ_SUNDAY 0x01 | |
660 | #define CEC_OP_REC_SEQ_MONDAY 0x02 | |
661 | #define CEC_OP_REC_SEQ_TUESDAY 0x04 | |
662 | #define CEC_OP_REC_SEQ_WEDNESDAY 0x08 | |
663 | #define CEC_OP_REC_SEQ_THURSDAY 0x10 | |
664 | #define CEC_OP_REC_SEQ_FRIDAY 0x20 | |
caa7302b | 665 | #define CEC_OP_REC_SEQ_SATURDAY 0x40 |
3132583e HV |
666 | #define CEC_OP_REC_SEQ_ONCE_ONLY 0x00 |
667 | ||
668 | #define CEC_MSG_CLEAR_DIGITAL_TIMER 0x99 | |
669 | ||
670 | #define CEC_MSG_CLEAR_EXT_TIMER 0xa1 | |
671 | /* External Source Specifier Operand (ext_src_spec) */ | |
672 | #define CEC_OP_EXT_SRC_PLUG 0x04 | |
673 | #define CEC_OP_EXT_SRC_PHYS_ADDR 0x05 | |
674 | ||
675 | #define CEC_MSG_SET_ANALOGUE_TIMER 0x34 | |
676 | #define CEC_MSG_SET_DIGITAL_TIMER 0x97 | |
677 | #define CEC_MSG_SET_EXT_TIMER 0xa2 | |
678 | ||
679 | #define CEC_MSG_SET_TIMER_PROGRAM_TITLE 0x67 | |
680 | #define CEC_MSG_TIMER_CLEARED_STATUS 0x43 | |
681 | /* Timer Cleared Status Data Operand (timer_cleared_status) */ | |
682 | #define CEC_OP_TIMER_CLR_STAT_RECORDING 0x00 | |
683 | #define CEC_OP_TIMER_CLR_STAT_NO_MATCHING 0x01 | |
684 | #define CEC_OP_TIMER_CLR_STAT_NO_INFO 0x02 | |
685 | #define CEC_OP_TIMER_CLR_STAT_CLEARED 0x80 | |
686 | ||
687 | #define CEC_MSG_TIMER_STATUS 0x35 | |
688 | /* Timer Overlap Warning Operand (timer_overlap_warning) */ | |
689 | #define CEC_OP_TIMER_OVERLAP_WARNING_NO_OVERLAP 0 | |
690 | #define CEC_OP_TIMER_OVERLAP_WARNING_OVERLAP 1 | |
691 | /* Media Info Operand (media_info) */ | |
692 | #define CEC_OP_MEDIA_INFO_UNPROT_MEDIA 0 | |
693 | #define CEC_OP_MEDIA_INFO_PROT_MEDIA 1 | |
694 | #define CEC_OP_MEDIA_INFO_NO_MEDIA 2 | |
695 | /* Programmed Indicator Operand (prog_indicator) */ | |
696 | #define CEC_OP_PROG_IND_NOT_PROGRAMMED 0 | |
697 | #define CEC_OP_PROG_IND_PROGRAMMED 1 | |
698 | /* Programmed Info Operand (prog_info) */ | |
699 | #define CEC_OP_PROG_INFO_ENOUGH_SPACE 0x08 | |
700 | #define CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE 0x09 | |
701 | #define CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE 0x0b | |
702 | #define CEC_OP_PROG_INFO_NONE_AVAILABLE 0x0a | |
703 | /* Not Programmed Error Info Operand (prog_error) */ | |
704 | #define CEC_OP_PROG_ERROR_NO_FREE_TIMER 0x01 | |
705 | #define CEC_OP_PROG_ERROR_DATE_OUT_OF_RANGE 0x02 | |
706 | #define CEC_OP_PROG_ERROR_REC_SEQ_ERROR 0x03 | |
707 | #define CEC_OP_PROG_ERROR_INV_EXT_PLUG 0x04 | |
708 | #define CEC_OP_PROG_ERROR_INV_EXT_PHYS_ADDR 0x05 | |
709 | #define CEC_OP_PROG_ERROR_CA_UNSUPP 0x06 | |
710 | #define CEC_OP_PROG_ERROR_INSUF_CA_ENTITLEMENTS 0x07 | |
711 | #define CEC_OP_PROG_ERROR_RESOLUTION_UNSUPP 0x08 | |
712 | #define CEC_OP_PROG_ERROR_PARENTAL_LOCK 0x09 | |
713 | #define CEC_OP_PROG_ERROR_CLOCK_FAILURE 0x0a | |
714 | #define CEC_OP_PROG_ERROR_DUPLICATE 0x0e | |
715 | ||
716 | ||
717 | /* System Information Feature */ | |
718 | #define CEC_MSG_CEC_VERSION 0x9e | |
719 | /* CEC Version Operand (cec_version) */ | |
720 | #define CEC_OP_CEC_VERSION_1_3A 4 | |
721 | #define CEC_OP_CEC_VERSION_1_4 5 | |
722 | #define CEC_OP_CEC_VERSION_2_0 6 | |
723 | ||
724 | #define CEC_MSG_GET_CEC_VERSION 0x9f | |
725 | #define CEC_MSG_GIVE_PHYSICAL_ADDR 0x83 | |
726 | #define CEC_MSG_GET_MENU_LANGUAGE 0x91 | |
727 | #define CEC_MSG_REPORT_PHYSICAL_ADDR 0x84 | |
728 | /* Primary Device Type Operand (prim_devtype) */ | |
729 | #define CEC_OP_PRIM_DEVTYPE_TV 0 | |
730 | #define CEC_OP_PRIM_DEVTYPE_RECORD 1 | |
731 | #define CEC_OP_PRIM_DEVTYPE_TUNER 3 | |
732 | #define CEC_OP_PRIM_DEVTYPE_PLAYBACK 4 | |
733 | #define CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM 5 | |
734 | #define CEC_OP_PRIM_DEVTYPE_SWITCH 6 | |
735 | #define CEC_OP_PRIM_DEVTYPE_PROCESSOR 7 | |
736 | ||
737 | #define CEC_MSG_SET_MENU_LANGUAGE 0x32 | |
738 | #define CEC_MSG_REPORT_FEATURES 0xa6 /* HDMI 2.0 */ | |
739 | /* All Device Types Operand (all_device_types) */ | |
740 | #define CEC_OP_ALL_DEVTYPE_TV 0x80 | |
741 | #define CEC_OP_ALL_DEVTYPE_RECORD 0x40 | |
742 | #define CEC_OP_ALL_DEVTYPE_TUNER 0x20 | |
743 | #define CEC_OP_ALL_DEVTYPE_PLAYBACK 0x10 | |
744 | #define CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM 0x08 | |
745 | #define CEC_OP_ALL_DEVTYPE_SWITCH 0x04 | |
746 | /* | |
747 | * And if you wondering what happened to PROCESSOR devices: those should | |
748 | * be mapped to a SWITCH. | |
749 | */ | |
750 | ||
751 | /* Valid for RC Profile and Device Feature operands */ | |
752 | #define CEC_OP_FEAT_EXT 0x80 /* Extension bit */ | |
753 | /* RC Profile Operand (rc_profile) */ | |
754 | #define CEC_OP_FEAT_RC_TV_PROFILE_NONE 0x00 | |
755 | #define CEC_OP_FEAT_RC_TV_PROFILE_1 0x02 | |
756 | #define CEC_OP_FEAT_RC_TV_PROFILE_2 0x06 | |
757 | #define CEC_OP_FEAT_RC_TV_PROFILE_3 0x0a | |
758 | #define CEC_OP_FEAT_RC_TV_PROFILE_4 0x0e | |
759 | #define CEC_OP_FEAT_RC_SRC_HAS_DEV_ROOT_MENU 0x50 | |
760 | #define CEC_OP_FEAT_RC_SRC_HAS_DEV_SETUP_MENU 0x48 | |
761 | #define CEC_OP_FEAT_RC_SRC_HAS_CONTENTS_MENU 0x44 | |
762 | #define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_TOP_MENU 0x42 | |
763 | #define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_CONTEXT_MENU 0x41 | |
764 | /* Device Feature Operand (dev_features) */ | |
765 | #define CEC_OP_FEAT_DEV_HAS_RECORD_TV_SCREEN 0x40 | |
766 | #define CEC_OP_FEAT_DEV_HAS_SET_OSD_STRING 0x20 | |
767 | #define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL 0x10 | |
768 | #define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE 0x08 | |
769 | #define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX 0x04 | |
770 | #define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX 0x02 | |
771 | ||
772 | #define CEC_MSG_GIVE_FEATURES 0xa5 /* HDMI 2.0 */ | |
773 | ||
774 | ||
775 | /* Deck Control Feature */ | |
776 | #define CEC_MSG_DECK_CONTROL 0x42 | |
777 | /* Deck Control Mode Operand (deck_control_mode) */ | |
778 | #define CEC_OP_DECK_CTL_MODE_SKIP_FWD 1 | |
779 | #define CEC_OP_DECK_CTL_MODE_SKIP_REV 2 | |
780 | #define CEC_OP_DECK_CTL_MODE_STOP 3 | |
781 | #define CEC_OP_DECK_CTL_MODE_EJECT 4 | |
782 | ||
783 | #define CEC_MSG_DECK_STATUS 0x1b | |
784 | /* Deck Info Operand (deck_info) */ | |
785 | #define CEC_OP_DECK_INFO_PLAY 0x11 | |
786 | #define CEC_OP_DECK_INFO_RECORD 0x12 | |
787 | #define CEC_OP_DECK_INFO_PLAY_REV 0x13 | |
788 | #define CEC_OP_DECK_INFO_STILL 0x14 | |
789 | #define CEC_OP_DECK_INFO_SLOW 0x15 | |
790 | #define CEC_OP_DECK_INFO_SLOW_REV 0x16 | |
791 | #define CEC_OP_DECK_INFO_FAST_FWD 0x17 | |
792 | #define CEC_OP_DECK_INFO_FAST_REV 0x18 | |
793 | #define CEC_OP_DECK_INFO_NO_MEDIA 0x19 | |
794 | #define CEC_OP_DECK_INFO_STOP 0x1a | |
795 | #define CEC_OP_DECK_INFO_SKIP_FWD 0x1b | |
796 | #define CEC_OP_DECK_INFO_SKIP_REV 0x1c | |
797 | #define CEC_OP_DECK_INFO_INDEX_SEARCH_FWD 0x1d | |
798 | #define CEC_OP_DECK_INFO_INDEX_SEARCH_REV 0x1e | |
799 | #define CEC_OP_DECK_INFO_OTHER 0x1f | |
800 | ||
801 | #define CEC_MSG_GIVE_DECK_STATUS 0x1a | |
802 | /* Status Request Operand (status_req) */ | |
803 | #define CEC_OP_STATUS_REQ_ON 1 | |
804 | #define CEC_OP_STATUS_REQ_OFF 2 | |
805 | #define CEC_OP_STATUS_REQ_ONCE 3 | |
806 | ||
807 | #define CEC_MSG_PLAY 0x41 | |
808 | /* Play Mode Operand (play_mode) */ | |
809 | #define CEC_OP_PLAY_MODE_PLAY_FWD 0x24 | |
810 | #define CEC_OP_PLAY_MODE_PLAY_REV 0x20 | |
811 | #define CEC_OP_PLAY_MODE_PLAY_STILL 0x25 | |
812 | #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MIN 0x05 | |
813 | #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MED 0x06 | |
814 | #define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MAX 0x07 | |
815 | #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MIN 0x09 | |
816 | #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MED 0x0a | |
817 | #define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MAX 0x0b | |
818 | #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MIN 0x15 | |
819 | #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MED 0x16 | |
820 | #define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MAX 0x17 | |
821 | #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MIN 0x19 | |
822 | #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MED 0x1a | |
823 | #define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MAX 0x1b | |
824 | ||
825 | ||
826 | /* Tuner Control Feature */ | |
827 | #define CEC_MSG_GIVE_TUNER_DEVICE_STATUS 0x08 | |
828 | #define CEC_MSG_SELECT_ANALOGUE_SERVICE 0x92 | |
829 | #define CEC_MSG_SELECT_DIGITAL_SERVICE 0x93 | |
830 | #define CEC_MSG_TUNER_DEVICE_STATUS 0x07 | |
831 | /* Recording Flag Operand (rec_flag) */ | |
806e0cdf HV |
832 | #define CEC_OP_REC_FLAG_NOT_USED 0 |
833 | #define CEC_OP_REC_FLAG_USED 1 | |
3132583e HV |
834 | /* Tuner Display Info Operand (tuner_display_info) */ |
835 | #define CEC_OP_TUNER_DISPLAY_INFO_DIGITAL 0 | |
836 | #define CEC_OP_TUNER_DISPLAY_INFO_NONE 1 | |
837 | #define CEC_OP_TUNER_DISPLAY_INFO_ANALOGUE 2 | |
838 | ||
839 | #define CEC_MSG_TUNER_STEP_DECREMENT 0x06 | |
840 | #define CEC_MSG_TUNER_STEP_INCREMENT 0x05 | |
841 | ||
842 | ||
843 | /* Vendor Specific Commands Feature */ | |
844 | ||
845 | /* | |
846 | * Has also: | |
847 | * CEC_MSG_CEC_VERSION | |
848 | * CEC_MSG_GET_CEC_VERSION | |
849 | */ | |
850 | #define CEC_MSG_DEVICE_VENDOR_ID 0x87 | |
851 | #define CEC_MSG_GIVE_DEVICE_VENDOR_ID 0x8c | |
852 | #define CEC_MSG_VENDOR_COMMAND 0x89 | |
853 | #define CEC_MSG_VENDOR_COMMAND_WITH_ID 0xa0 | |
854 | #define CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN 0x8a | |
855 | #define CEC_MSG_VENDOR_REMOTE_BUTTON_UP 0x8b | |
856 | ||
857 | ||
858 | /* OSD Display Feature */ | |
859 | #define CEC_MSG_SET_OSD_STRING 0x64 | |
860 | /* Display Control Operand (disp_ctl) */ | |
861 | #define CEC_OP_DISP_CTL_DEFAULT 0x00 | |
862 | #define CEC_OP_DISP_CTL_UNTIL_CLEARED 0x40 | |
863 | #define CEC_OP_DISP_CTL_CLEAR 0x80 | |
864 | ||
865 | ||
866 | /* Device OSD Transfer Feature */ | |
867 | #define CEC_MSG_GIVE_OSD_NAME 0x46 | |
868 | #define CEC_MSG_SET_OSD_NAME 0x47 | |
869 | ||
870 | ||
871 | /* Device Menu Control Feature */ | |
872 | #define CEC_MSG_MENU_REQUEST 0x8d | |
873 | /* Menu Request Type Operand (menu_req) */ | |
874 | #define CEC_OP_MENU_REQUEST_ACTIVATE 0x00 | |
875 | #define CEC_OP_MENU_REQUEST_DEACTIVATE 0x01 | |
876 | #define CEC_OP_MENU_REQUEST_QUERY 0x02 | |
877 | ||
878 | #define CEC_MSG_MENU_STATUS 0x8e | |
879 | /* Menu State Operand (menu_state) */ | |
880 | #define CEC_OP_MENU_STATE_ACTIVATED 0x00 | |
881 | #define CEC_OP_MENU_STATE_DEACTIVATED 0x01 | |
882 | ||
883 | #define CEC_MSG_USER_CONTROL_PRESSED 0x44 | |
eeabc18b HV |
884 | /* UI Command Operand (ui_cmd) */ |
885 | #define CEC_OP_UI_CMD_SELECT 0x00 | |
886 | #define CEC_OP_UI_CMD_UP 0x01 | |
887 | #define CEC_OP_UI_CMD_DOWN 0x02 | |
888 | #define CEC_OP_UI_CMD_LEFT 0x03 | |
889 | #define CEC_OP_UI_CMD_RIGHT 0x04 | |
890 | #define CEC_OP_UI_CMD_RIGHT_UP 0x05 | |
891 | #define CEC_OP_UI_CMD_RIGHT_DOWN 0x06 | |
892 | #define CEC_OP_UI_CMD_LEFT_UP 0x07 | |
893 | #define CEC_OP_UI_CMD_LEFT_DOWN 0x08 | |
894 | #define CEC_OP_UI_CMD_DEVICE_ROOT_MENU 0x09 | |
895 | #define CEC_OP_UI_CMD_DEVICE_SETUP_MENU 0x0a | |
896 | #define CEC_OP_UI_CMD_CONTENTS_MENU 0x0b | |
897 | #define CEC_OP_UI_CMD_FAVORITE_MENU 0x0c | |
898 | #define CEC_OP_UI_CMD_BACK 0x0d | |
899 | #define CEC_OP_UI_CMD_MEDIA_TOP_MENU 0x10 | |
900 | #define CEC_OP_UI_CMD_MEDIA_CONTEXT_SENSITIVE_MENU 0x11 | |
901 | #define CEC_OP_UI_CMD_NUMBER_ENTRY_MODE 0x1d | |
902 | #define CEC_OP_UI_CMD_NUMBER_11 0x1e | |
903 | #define CEC_OP_UI_CMD_NUMBER_12 0x1f | |
904 | #define CEC_OP_UI_CMD_NUMBER_0_OR_NUMBER_10 0x20 | |
905 | #define CEC_OP_UI_CMD_NUMBER_1 0x21 | |
906 | #define CEC_OP_UI_CMD_NUMBER_2 0x22 | |
907 | #define CEC_OP_UI_CMD_NUMBER_3 0x23 | |
908 | #define CEC_OP_UI_CMD_NUMBER_4 0x24 | |
909 | #define CEC_OP_UI_CMD_NUMBER_5 0x25 | |
910 | #define CEC_OP_UI_CMD_NUMBER_6 0x26 | |
911 | #define CEC_OP_UI_CMD_NUMBER_7 0x27 | |
912 | #define CEC_OP_UI_CMD_NUMBER_8 0x28 | |
913 | #define CEC_OP_UI_CMD_NUMBER_9 0x29 | |
914 | #define CEC_OP_UI_CMD_DOT 0x2a | |
915 | #define CEC_OP_UI_CMD_ENTER 0x2b | |
916 | #define CEC_OP_UI_CMD_CLEAR 0x2c | |
917 | #define CEC_OP_UI_CMD_NEXT_FAVORITE 0x2f | |
918 | #define CEC_OP_UI_CMD_CHANNEL_UP 0x30 | |
919 | #define CEC_OP_UI_CMD_CHANNEL_DOWN 0x31 | |
920 | #define CEC_OP_UI_CMD_PREVIOUS_CHANNEL 0x32 | |
921 | #define CEC_OP_UI_CMD_SOUND_SELECT 0x33 | |
922 | #define CEC_OP_UI_CMD_INPUT_SELECT 0x34 | |
923 | #define CEC_OP_UI_CMD_DISPLAY_INFORMATION 0x35 | |
924 | #define CEC_OP_UI_CMD_HELP 0x36 | |
925 | #define CEC_OP_UI_CMD_PAGE_UP 0x37 | |
926 | #define CEC_OP_UI_CMD_PAGE_DOWN 0x38 | |
927 | #define CEC_OP_UI_CMD_POWER 0x40 | |
928 | #define CEC_OP_UI_CMD_VOLUME_UP 0x41 | |
929 | #define CEC_OP_UI_CMD_VOLUME_DOWN 0x42 | |
930 | #define CEC_OP_UI_CMD_MUTE 0x43 | |
931 | #define CEC_OP_UI_CMD_PLAY 0x44 | |
932 | #define CEC_OP_UI_CMD_STOP 0x45 | |
933 | #define CEC_OP_UI_CMD_PAUSE 0x46 | |
934 | #define CEC_OP_UI_CMD_RECORD 0x47 | |
935 | #define CEC_OP_UI_CMD_REWIND 0x48 | |
936 | #define CEC_OP_UI_CMD_FAST_FORWARD 0x49 | |
937 | #define CEC_OP_UI_CMD_EJECT 0x4a | |
938 | #define CEC_OP_UI_CMD_SKIP_FORWARD 0x4b | |
939 | #define CEC_OP_UI_CMD_SKIP_BACKWARD 0x4c | |
940 | #define CEC_OP_UI_CMD_STOP_RECORD 0x4d | |
941 | #define CEC_OP_UI_CMD_PAUSE_RECORD 0x4e | |
942 | #define CEC_OP_UI_CMD_ANGLE 0x50 | |
943 | #define CEC_OP_UI_CMD_SUB_PICTURE 0x51 | |
944 | #define CEC_OP_UI_CMD_VIDEO_ON_DEMAND 0x52 | |
945 | #define CEC_OP_UI_CMD_ELECTRONIC_PROGRAM_GUIDE 0x53 | |
946 | #define CEC_OP_UI_CMD_TIMER_PROGRAMMING 0x54 | |
947 | #define CEC_OP_UI_CMD_INITIAL_CONFIGURATION 0x55 | |
948 | #define CEC_OP_UI_CMD_SELECT_BROADCAST_TYPE 0x56 | |
949 | #define CEC_OP_UI_CMD_SELECT_SOUND_PRESENTATION 0x57 | |
950 | #define CEC_OP_UI_CMD_AUDIO_DESCRIPTION 0x58 | |
951 | #define CEC_OP_UI_CMD_INTERNET 0x59 | |
952 | #define CEC_OP_UI_CMD_3D_MODE 0x5a | |
953 | #define CEC_OP_UI_CMD_PLAY_FUNCTION 0x60 | |
954 | #define CEC_OP_UI_CMD_PAUSE_PLAY_FUNCTION 0x61 | |
955 | #define CEC_OP_UI_CMD_RECORD_FUNCTION 0x62 | |
956 | #define CEC_OP_UI_CMD_PAUSE_RECORD_FUNCTION 0x63 | |
957 | #define CEC_OP_UI_CMD_STOP_FUNCTION 0x64 | |
958 | #define CEC_OP_UI_CMD_MUTE_FUNCTION 0x65 | |
959 | #define CEC_OP_UI_CMD_RESTORE_VOLUME_FUNCTION 0x66 | |
960 | #define CEC_OP_UI_CMD_TUNE_FUNCTION 0x67 | |
961 | #define CEC_OP_UI_CMD_SELECT_MEDIA_FUNCTION 0x68 | |
962 | #define CEC_OP_UI_CMD_SELECT_AV_INPUT_FUNCTION 0x69 | |
963 | #define CEC_OP_UI_CMD_SELECT_AUDIO_INPUT_FUNCTION 0x6a | |
964 | #define CEC_OP_UI_CMD_POWER_TOGGLE_FUNCTION 0x6b | |
965 | #define CEC_OP_UI_CMD_POWER_OFF_FUNCTION 0x6c | |
966 | #define CEC_OP_UI_CMD_POWER_ON_FUNCTION 0x6d | |
967 | #define CEC_OP_UI_CMD_F1_BLUE 0x71 | |
968 | #define CEC_OP_UI_CMD_F2_RED 0x72 | |
969 | #define CEC_OP_UI_CMD_F3_GREEN 0x73 | |
970 | #define CEC_OP_UI_CMD_F4_YELLOW 0x74 | |
971 | #define CEC_OP_UI_CMD_F5 0x75 | |
972 | #define CEC_OP_UI_CMD_DATA 0x76 | |
3132583e HV |
973 | /* UI Broadcast Type Operand (ui_bcast_type) */ |
974 | #define CEC_OP_UI_BCAST_TYPE_TOGGLE_ALL 0x00 | |
975 | #define CEC_OP_UI_BCAST_TYPE_TOGGLE_DIG_ANA 0x01 | |
976 | #define CEC_OP_UI_BCAST_TYPE_ANALOGUE 0x10 | |
977 | #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_T 0x20 | |
978 | #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_CABLE 0x30 | |
979 | #define CEC_OP_UI_BCAST_TYPE_ANALOGUE_SAT 0x40 | |
980 | #define CEC_OP_UI_BCAST_TYPE_DIGITAL 0x50 | |
981 | #define CEC_OP_UI_BCAST_TYPE_DIGITAL_T 0x60 | |
982 | #define CEC_OP_UI_BCAST_TYPE_DIGITAL_CABLE 0x70 | |
983 | #define CEC_OP_UI_BCAST_TYPE_DIGITAL_SAT 0x80 | |
984 | #define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT 0x90 | |
985 | #define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT2 0x91 | |
986 | #define CEC_OP_UI_BCAST_TYPE_IP 0xa0 | |
987 | /* UI Sound Presentation Control Operand (ui_snd_pres_ctl) */ | |
988 | #define CEC_OP_UI_SND_PRES_CTL_DUAL_MONO 0x10 | |
989 | #define CEC_OP_UI_SND_PRES_CTL_KARAOKE 0x20 | |
990 | #define CEC_OP_UI_SND_PRES_CTL_DOWNMIX 0x80 | |
991 | #define CEC_OP_UI_SND_PRES_CTL_REVERB 0x90 | |
992 | #define CEC_OP_UI_SND_PRES_CTL_EQUALIZER 0xa0 | |
993 | #define CEC_OP_UI_SND_PRES_CTL_BASS_UP 0xb1 | |
994 | #define CEC_OP_UI_SND_PRES_CTL_BASS_NEUTRAL 0xb2 | |
995 | #define CEC_OP_UI_SND_PRES_CTL_BASS_DOWN 0xb3 | |
996 | #define CEC_OP_UI_SND_PRES_CTL_TREBLE_UP 0xc1 | |
997 | #define CEC_OP_UI_SND_PRES_CTL_TREBLE_NEUTRAL 0xc2 | |
998 | #define CEC_OP_UI_SND_PRES_CTL_TREBLE_DOWN 0xc3 | |
999 | ||
1000 | #define CEC_MSG_USER_CONTROL_RELEASED 0x45 | |
1001 | ||
1002 | ||
1003 | /* Remote Control Passthrough Feature */ | |
1004 | ||
1005 | /* | |
1006 | * Has also: | |
1007 | * CEC_MSG_USER_CONTROL_PRESSED | |
1008 | * CEC_MSG_USER_CONTROL_RELEASED | |
1009 | */ | |
1010 | ||
1011 | ||
1012 | /* Power Status Feature */ | |
1013 | #define CEC_MSG_GIVE_DEVICE_POWER_STATUS 0x8f | |
1014 | #define CEC_MSG_REPORT_POWER_STATUS 0x90 | |
1015 | /* Power Status Operand (pwr_state) */ | |
1016 | #define CEC_OP_POWER_STATUS_ON 0 | |
1017 | #define CEC_OP_POWER_STATUS_STANDBY 1 | |
1018 | #define CEC_OP_POWER_STATUS_TO_ON 2 | |
1019 | #define CEC_OP_POWER_STATUS_TO_STANDBY 3 | |
1020 | ||
1021 | ||
1022 | /* General Protocol Messages */ | |
1023 | #define CEC_MSG_FEATURE_ABORT 0x00 | |
1024 | /* Abort Reason Operand (reason) */ | |
1025 | #define CEC_OP_ABORT_UNRECOGNIZED_OP 0 | |
1026 | #define CEC_OP_ABORT_INCORRECT_MODE 1 | |
1027 | #define CEC_OP_ABORT_NO_SOURCE 2 | |
1028 | #define CEC_OP_ABORT_INVALID_OP 3 | |
1029 | #define CEC_OP_ABORT_REFUSED 4 | |
1030 | #define CEC_OP_ABORT_UNDETERMINED 5 | |
1031 | ||
1032 | #define CEC_MSG_ABORT 0xff | |
1033 | ||
1034 | ||
1035 | /* System Audio Control Feature */ | |
1036 | ||
1037 | /* | |
1038 | * Has also: | |
1039 | * CEC_MSG_USER_CONTROL_PRESSED | |
1040 | * CEC_MSG_USER_CONTROL_RELEASED | |
1041 | */ | |
1042 | #define CEC_MSG_GIVE_AUDIO_STATUS 0x71 | |
1043 | #define CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS 0x7d | |
1044 | #define CEC_MSG_REPORT_AUDIO_STATUS 0x7a | |
1045 | /* Audio Mute Status Operand (aud_mute_status) */ | |
1046 | #define CEC_OP_AUD_MUTE_STATUS_OFF 0 | |
1047 | #define CEC_OP_AUD_MUTE_STATUS_ON 1 | |
1048 | ||
1049 | #define CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR 0xa3 | |
1050 | #define CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR 0xa4 | |
1051 | #define CEC_MSG_SET_SYSTEM_AUDIO_MODE 0x72 | |
1052 | /* System Audio Status Operand (sys_aud_status) */ | |
1053 | #define CEC_OP_SYS_AUD_STATUS_OFF 0 | |
1054 | #define CEC_OP_SYS_AUD_STATUS_ON 1 | |
1055 | ||
1056 | #define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST 0x70 | |
1057 | #define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS 0x7e | |
1058 | /* Audio Format ID Operand (audio_format_id) */ | |
1059 | #define CEC_OP_AUD_FMT_ID_CEA861 0 | |
1060 | #define CEC_OP_AUD_FMT_ID_CEA861_CXT 1 | |
1061 | ||
1062 | ||
1063 | /* Audio Rate Control Feature */ | |
1064 | #define CEC_MSG_SET_AUDIO_RATE 0x9a | |
1065 | /* Audio Rate Operand (audio_rate) */ | |
1066 | #define CEC_OP_AUD_RATE_OFF 0 | |
1067 | #define CEC_OP_AUD_RATE_WIDE_STD 1 | |
1068 | #define CEC_OP_AUD_RATE_WIDE_FAST 2 | |
1069 | #define CEC_OP_AUD_RATE_WIDE_SLOW 3 | |
1070 | #define CEC_OP_AUD_RATE_NARROW_STD 4 | |
1071 | #define CEC_OP_AUD_RATE_NARROW_FAST 5 | |
1072 | #define CEC_OP_AUD_RATE_NARROW_SLOW 6 | |
1073 | ||
1074 | ||
1075 | /* Audio Return Channel Control Feature */ | |
1076 | #define CEC_MSG_INITIATE_ARC 0xc0 | |
1077 | #define CEC_MSG_REPORT_ARC_INITIATED 0xc1 | |
1078 | #define CEC_MSG_REPORT_ARC_TERMINATED 0xc2 | |
1079 | #define CEC_MSG_REQUEST_ARC_INITIATION 0xc3 | |
1080 | #define CEC_MSG_REQUEST_ARC_TERMINATION 0xc4 | |
1081 | #define CEC_MSG_TERMINATE_ARC 0xc5 | |
1082 | ||
1083 | ||
1084 | /* Dynamic Audio Lipsync Feature */ | |
1085 | /* Only for CEC 2.0 and up */ | |
1086 | #define CEC_MSG_REQUEST_CURRENT_LATENCY 0xa7 | |
1087 | #define CEC_MSG_REPORT_CURRENT_LATENCY 0xa8 | |
1088 | /* Low Latency Mode Operand (low_latency_mode) */ | |
1089 | #define CEC_OP_LOW_LATENCY_MODE_OFF 0 | |
1090 | #define CEC_OP_LOW_LATENCY_MODE_ON 1 | |
1091 | /* Audio Output Compensated Operand (audio_out_compensated) */ | |
1092 | #define CEC_OP_AUD_OUT_COMPENSATED_NA 0 | |
1093 | #define CEC_OP_AUD_OUT_COMPENSATED_DELAY 1 | |
1094 | #define CEC_OP_AUD_OUT_COMPENSATED_NO_DELAY 2 | |
1095 | #define CEC_OP_AUD_OUT_COMPENSATED_PARTIAL_DELAY 3 | |
1096 | ||
1097 | ||
1098 | /* Capability Discovery and Control Feature */ | |
1099 | #define CEC_MSG_CDC_MESSAGE 0xf8 | |
1100 | /* Ethernet-over-HDMI: nobody ever does this... */ | |
1101 | #define CEC_MSG_CDC_HEC_INQUIRE_STATE 0x00 | |
1102 | #define CEC_MSG_CDC_HEC_REPORT_STATE 0x01 | |
1103 | /* HEC Functionality State Operand (hec_func_state) */ | |
1104 | #define CEC_OP_HEC_FUNC_STATE_NOT_SUPPORTED 0 | |
1105 | #define CEC_OP_HEC_FUNC_STATE_INACTIVE 1 | |
1106 | #define CEC_OP_HEC_FUNC_STATE_ACTIVE 2 | |
1107 | #define CEC_OP_HEC_FUNC_STATE_ACTIVATION_FIELD 3 | |
1108 | /* Host Functionality State Operand (host_func_state) */ | |
1109 | #define CEC_OP_HOST_FUNC_STATE_NOT_SUPPORTED 0 | |
1110 | #define CEC_OP_HOST_FUNC_STATE_INACTIVE 1 | |
1111 | #define CEC_OP_HOST_FUNC_STATE_ACTIVE 2 | |
1112 | /* ENC Functionality State Operand (enc_func_state) */ | |
1113 | #define CEC_OP_ENC_FUNC_STATE_EXT_CON_NOT_SUPPORTED 0 | |
1114 | #define CEC_OP_ENC_FUNC_STATE_EXT_CON_INACTIVE 1 | |
1115 | #define CEC_OP_ENC_FUNC_STATE_EXT_CON_ACTIVE 2 | |
1116 | /* CDC Error Code Operand (cdc_errcode) */ | |
1117 | #define CEC_OP_CDC_ERROR_CODE_NONE 0 | |
1118 | #define CEC_OP_CDC_ERROR_CODE_CAP_UNSUPPORTED 1 | |
1119 | #define CEC_OP_CDC_ERROR_CODE_WRONG_STATE 2 | |
1120 | #define CEC_OP_CDC_ERROR_CODE_OTHER 3 | |
1121 | /* HEC Support Operand (hec_support) */ | |
1122 | #define CEC_OP_HEC_SUPPORT_NO 0 | |
1123 | #define CEC_OP_HEC_SUPPORT_YES 1 | |
1124 | /* HEC Activation Operand (hec_activation) */ | |
1125 | #define CEC_OP_HEC_ACTIVATION_ON 0 | |
1126 | #define CEC_OP_HEC_ACTIVATION_OFF 1 | |
1127 | ||
1128 | #define CEC_MSG_CDC_HEC_SET_STATE_ADJACENT 0x02 | |
1129 | #define CEC_MSG_CDC_HEC_SET_STATE 0x03 | |
1130 | /* HEC Set State Operand (hec_set_state) */ | |
1131 | #define CEC_OP_HEC_SET_STATE_DEACTIVATE 0 | |
1132 | #define CEC_OP_HEC_SET_STATE_ACTIVATE 1 | |
1133 | ||
1134 | #define CEC_MSG_CDC_HEC_REQUEST_DEACTIVATION 0x04 | |
1135 | #define CEC_MSG_CDC_HEC_NOTIFY_ALIVE 0x05 | |
1136 | #define CEC_MSG_CDC_HEC_DISCOVER 0x06 | |
1137 | /* Hotplug Detect messages */ | |
1138 | #define CEC_MSG_CDC_HPD_SET_STATE 0x10 | |
1139 | /* HPD State Operand (hpd_state) */ | |
1140 | #define CEC_OP_HPD_STATE_CP_EDID_DISABLE 0 | |
1141 | #define CEC_OP_HPD_STATE_CP_EDID_ENABLE 1 | |
1142 | #define CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE 2 | |
1143 | #define CEC_OP_HPD_STATE_EDID_DISABLE 3 | |
1144 | #define CEC_OP_HPD_STATE_EDID_ENABLE 4 | |
1145 | #define CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE 5 | |
1146 | #define CEC_MSG_CDC_HPD_REPORT_STATE 0x11 | |
1147 | /* HPD Error Code Operand (hpd_error) */ | |
1148 | #define CEC_OP_HPD_ERROR_NONE 0 | |
1149 | #define CEC_OP_HPD_ERROR_INITIATOR_NOT_CAPABLE 1 | |
1150 | #define CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE 2 | |
1151 | #define CEC_OP_HPD_ERROR_OTHER 3 | |
1152 | #define CEC_OP_HPD_ERROR_NONE_NO_VIDEO 4 | |
1153 | ||
a69a168a HV |
1154 | /* End of Messages */ |
1155 | ||
1156 | /* Helper functions to identify the 'special' CEC devices */ | |
1157 | ||
3145c754 | 1158 | static inline int cec_is_2nd_tv(const struct cec_log_addrs *las) |
a69a168a HV |
1159 | { |
1160 | /* | |
1161 | * It is a second TV if the logical address is 14 or 15 and the | |
1162 | * primary device type is a TV. | |
1163 | */ | |
1164 | return las->num_log_addrs && | |
1165 | las->log_addr[0] >= CEC_LOG_ADDR_SPECIFIC && | |
1166 | las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_TV; | |
1167 | } | |
1168 | ||
3145c754 | 1169 | static inline int cec_is_processor(const struct cec_log_addrs *las) |
a69a168a HV |
1170 | { |
1171 | /* | |
1172 | * It is a processor if the logical address is 12-15 and the | |
1173 | * primary device type is a Processor. | |
1174 | */ | |
1175 | return las->num_log_addrs && | |
1176 | las->log_addr[0] >= CEC_LOG_ADDR_BACKUP_1 && | |
1177 | las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_PROCESSOR; | |
1178 | } | |
1179 | ||
3145c754 | 1180 | static inline int cec_is_switch(const struct cec_log_addrs *las) |
a69a168a HV |
1181 | { |
1182 | /* | |
1183 | * It is a switch if the logical address is 15 and the | |
1184 | * primary device type is a Switch and the CDC-Only flag is not set. | |
1185 | */ | |
1186 | return las->num_log_addrs == 1 && | |
1187 | las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED && | |
1188 | las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH && | |
1189 | !(las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY); | |
1190 | } | |
1191 | ||
3145c754 | 1192 | static inline int cec_is_cdc_only(const struct cec_log_addrs *las) |
a69a168a HV |
1193 | { |
1194 | /* | |
1195 | * It is a CDC-only device if the logical address is 15 and the | |
1196 | * primary device type is a Switch and the CDC-Only flag is set. | |
1197 | */ | |
1198 | return las->num_log_addrs == 1 && | |
1199 | las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED && | |
1200 | las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH && | |
1201 | (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY); | |
1202 | } | |
1203 | ||
3132583e | 1204 | #endif |