Commit | Line | Data |
---|---|---|
b2441318 | 1 | /* SPDX-License-Identifier: GPL-2.0 */ |
14752412 TI |
2 | /* |
3 | * HD-audio controller (Azalia) registers and helpers | |
4 | * | |
5 | * For traditional reasons, we still use azx_ prefix here | |
6 | */ | |
7 | ||
8 | #ifndef __SOUND_HDA_REGISTER_H | |
9 | #define __SOUND_HDA_REGISTER_H | |
10 | ||
11 | #include <linux/io.h> | |
12 | #include <sound/hdaudio.h> | |
13 | ||
14 | #define AZX_REG_GCAP 0x00 | |
15 | #define AZX_GCAP_64OK (1 << 0) /* 64bit address support */ | |
16 | #define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */ | |
17 | #define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */ | |
18 | #define AZX_GCAP_ISS (15 << 8) /* # of input streams */ | |
19 | #define AZX_GCAP_OSS (15 << 12) /* # of output streams */ | |
20 | #define AZX_REG_VMIN 0x02 | |
21 | #define AZX_REG_VMAJ 0x03 | |
22 | #define AZX_REG_OUTPAY 0x04 | |
23 | #define AZX_REG_INPAY 0x06 | |
24 | #define AZX_REG_GCTL 0x08 | |
25 | #define AZX_GCTL_RESET (1 << 0) /* controller reset */ | |
26 | #define AZX_GCTL_FCNTRL (1 << 1) /* flush control */ | |
27 | #define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ | |
28 | #define AZX_REG_WAKEEN 0x0c | |
29 | #define AZX_REG_STATESTS 0x0e | |
30 | #define AZX_REG_GSTS 0x10 | |
31 | #define AZX_GSTS_FSTS (1 << 1) /* flush status */ | |
83b0b677 JK |
32 | #define AZX_REG_GCAP2 0x12 |
33 | #define AZX_REG_LLCH 0x14 | |
34 | #define AZX_REG_OUTSTRMPAY 0x18 | |
35 | #define AZX_REG_INSTRMPAY 0x1A | |
14752412 TI |
36 | #define AZX_REG_INTCTL 0x20 |
37 | #define AZX_REG_INTSTS 0x24 | |
38 | #define AZX_REG_WALLCLK 0x30 /* 24Mhz source */ | |
39 | #define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ | |
40 | #define AZX_REG_SSYNC 0x38 | |
41 | #define AZX_REG_CORBLBASE 0x40 | |
42 | #define AZX_REG_CORBUBASE 0x44 | |
43 | #define AZX_REG_CORBWP 0x48 | |
44 | #define AZX_REG_CORBRP 0x4a | |
45 | #define AZX_CORBRP_RST (1 << 15) /* read pointer reset */ | |
46 | #define AZX_REG_CORBCTL 0x4c | |
47 | #define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */ | |
48 | #define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ | |
49 | #define AZX_REG_CORBSTS 0x4d | |
50 | #define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */ | |
51 | #define AZX_REG_CORBSIZE 0x4e | |
52 | ||
53 | #define AZX_REG_RIRBLBASE 0x50 | |
54 | #define AZX_REG_RIRBUBASE 0x54 | |
55 | #define AZX_REG_RIRBWP 0x58 | |
56 | #define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */ | |
57 | #define AZX_REG_RINTCNT 0x5a | |
58 | #define AZX_REG_RIRBCTL 0x5c | |
59 | #define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ | |
60 | #define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */ | |
61 | #define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ | |
62 | #define AZX_REG_RIRBSTS 0x5d | |
63 | #define AZX_RBSTS_IRQ (1 << 0) /* response irq */ | |
64 | #define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */ | |
65 | #define AZX_REG_RIRBSIZE 0x5e | |
66 | ||
67 | #define AZX_REG_IC 0x60 | |
68 | #define AZX_REG_IR 0x64 | |
69 | #define AZX_REG_IRS 0x68 | |
70 | #define AZX_IRS_VALID (1<<1) | |
71 | #define AZX_IRS_BUSY (1<<0) | |
72 | ||
73 | #define AZX_REG_DPLBASE 0x70 | |
74 | #define AZX_REG_DPUBASE 0x74 | |
75 | #define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */ | |
76 | ||
77 | /* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ | |
78 | enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; | |
79 | ||
80 | /* stream register offsets from stream base */ | |
81 | #define AZX_REG_SD_CTL 0x00 | |
82 | #define AZX_REG_SD_STS 0x03 | |
83 | #define AZX_REG_SD_LPIB 0x04 | |
84 | #define AZX_REG_SD_CBL 0x08 | |
85 | #define AZX_REG_SD_LVI 0x0c | |
86 | #define AZX_REG_SD_FIFOW 0x0e | |
87 | #define AZX_REG_SD_FIFOSIZE 0x10 | |
88 | #define AZX_REG_SD_FORMAT 0x12 | |
83b0b677 | 89 | #define AZX_REG_SD_FIFOL 0x14 |
14752412 TI |
90 | #define AZX_REG_SD_BDLPL 0x18 |
91 | #define AZX_REG_SD_BDLPU 0x1c | |
92 | ||
50279d9b GS |
93 | /* GTS registers */ |
94 | #define AZX_REG_LLCH 0x14 | |
95 | ||
96 | #define AZX_REG_GTS_BASE 0x520 | |
97 | ||
98 | #define AZX_REG_GTSCC (AZX_REG_GTS_BASE + 0x00) | |
99 | #define AZX_REG_WALFCC (AZX_REG_GTS_BASE + 0x04) | |
100 | #define AZX_REG_TSCCL (AZX_REG_GTS_BASE + 0x08) | |
101 | #define AZX_REG_TSCCU (AZX_REG_GTS_BASE + 0x0C) | |
102 | #define AZX_REG_LLPFOC (AZX_REG_GTS_BASE + 0x14) | |
103 | #define AZX_REG_LLPCL (AZX_REG_GTS_BASE + 0x18) | |
104 | #define AZX_REG_LLPCU (AZX_REG_GTS_BASE + 0x1C) | |
105 | ||
98d8fc6c ML |
106 | /* Haswell/Broadwell display HD-A controller Extended Mode registers */ |
107 | #define AZX_REG_HSW_EM4 0x100c | |
108 | #define AZX_REG_HSW_EM5 0x1010 | |
109 | ||
70eafad8 TI |
110 | /* Skylake/Broxton vendor-specific registers */ |
111 | #define AZX_REG_VS_EM1 0x1000 | |
112 | #define AZX_REG_VS_INRC 0x1004 | |
113 | #define AZX_REG_VS_OUTRC 0x1008 | |
114 | #define AZX_REG_VS_FIFOTRK 0x100C | |
115 | #define AZX_REG_VS_FIFOTRK2 0x1010 | |
116 | #define AZX_REG_VS_EM2 0x1030 | |
117 | #define AZX_REG_VS_EM3L 0x1038 | |
118 | #define AZX_REG_VS_EM3U 0x103C | |
119 | #define AZX_REG_VS_EM4L 0x1040 | |
120 | #define AZX_REG_VS_EM4U 0x1044 | |
121 | #define AZX_REG_VS_LTRC 0x1048 | |
122 | #define AZX_REG_VS_D0I3C 0x104A | |
123 | #define AZX_REG_VS_PCE 0x104B | |
124 | #define AZX_REG_VS_L2MAGC 0x1050 | |
125 | #define AZX_REG_VS_L2LAHPT 0x1054 | |
126 | #define AZX_REG_VS_SDXDPIB_XBASE 0x1084 | |
127 | #define AZX_REG_VS_SDXDPIB_XINTERVAL 0x20 | |
128 | #define AZX_REG_VS_SDXEFIFOS_XBASE 0x1094 | |
129 | #define AZX_REG_VS_SDXEFIFOS_XINTERVAL 0x20 | |
7c23b7c1 | 130 | |
14752412 TI |
131 | /* PCI space */ |
132 | #define AZX_PCIREG_TCSEL 0x44 | |
133 | ||
134 | /* | |
135 | * other constants | |
136 | */ | |
137 | ||
138 | /* max number of fragments - we may use more if allocating more pages for BDL */ | |
139 | #define BDL_SIZE 4096 | |
140 | #define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) | |
141 | #define AZX_MAX_FRAG 32 | |
142 | /* max buffer size - no h/w limit, you can increase as you like */ | |
143 | #define AZX_MAX_BUF_SIZE (1024*1024*1024) | |
144 | ||
145 | /* RIRB int mask: overrun[2], response[0] */ | |
146 | #define RIRB_INT_RESPONSE 0x01 | |
147 | #define RIRB_INT_OVERRUN 0x04 | |
148 | #define RIRB_INT_MASK 0x05 | |
149 | ||
150 | /* STATESTS int mask: S3,SD2,SD1,SD0 */ | |
151 | #define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1) | |
152 | ||
153 | /* SD_CTL bits */ | |
154 | #define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ | |
155 | #define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ | |
156 | #define SD_CTL_STRIPE (3 << 16) /* stripe control */ | |
157 | #define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ | |
158 | #define SD_CTL_DIR (1 << 19) /* bi-directional stream */ | |
159 | #define SD_CTL_STREAM_TAG_MASK (0xf << 20) | |
160 | #define SD_CTL_STREAM_TAG_SHIFT 20 | |
161 | ||
162 | /* SD_CTL and SD_STS */ | |
163 | #define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ | |
164 | #define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ | |
165 | #define SD_INT_COMPLETE 0x04 /* completion interrupt */ | |
166 | #define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ | |
167 | SD_INT_COMPLETE) | |
168 | ||
169 | /* SD_STS */ | |
170 | #define SD_STS_FIFO_READY 0x20 /* FIFO ready */ | |
171 | ||
172 | /* INTCTL and INTSTS */ | |
173 | #define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */ | |
174 | #define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ | |
175 | #define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ | |
176 | ||
177 | /* below are so far hardcoded - should read registers in future */ | |
178 | #define AZX_MAX_CORB_ENTRIES 256 | |
179 | #define AZX_MAX_RIRB_ENTRIES 256 | |
180 | ||
83b0b677 JK |
181 | /* Capability header Structure */ |
182 | #define AZX_REG_CAP_HDR 0x0 | |
183 | #define AZX_CAP_HDR_VER_OFF 28 | |
184 | #define AZX_CAP_HDR_VER_MASK (0xF << AZX_CAP_HDR_VER_OFF) | |
185 | #define AZX_CAP_HDR_ID_OFF 16 | |
186 | #define AZX_CAP_HDR_ID_MASK (0xFFF << AZX_CAP_HDR_ID_OFF) | |
187 | #define AZX_CAP_HDR_NXT_PTR_MASK 0xFFFF | |
188 | ||
189 | /* registers of Software Position Based FIFO Capability Structure */ | |
190 | #define AZX_SPB_CAP_ID 0x4 | |
191 | #define AZX_REG_SPB_BASE_ADDR 0x700 | |
192 | #define AZX_REG_SPB_SPBFCH 0x00 | |
193 | #define AZX_REG_SPB_SPBFCCTL 0x04 | |
194 | /* Base used to calculate the iterating register offset */ | |
195 | #define AZX_SPB_BASE 0x08 | |
196 | /* Interval used to calculate the iterating register offset */ | |
197 | #define AZX_SPB_INTERVAL 0x08 | |
ee8bc4df JK |
198 | /* SPIB base */ |
199 | #define AZX_SPB_SPIB 0x00 | |
200 | /* SPIB MAXFIFO base*/ | |
201 | #define AZX_SPB_MAXFIFO 0x04 | |
83b0b677 JK |
202 | |
203 | /* registers of Global Time Synchronization Capability Structure */ | |
204 | #define AZX_GTS_CAP_ID 0x1 | |
205 | #define AZX_REG_GTS_GTSCH 0x00 | |
206 | #define AZX_REG_GTS_GTSCD 0x04 | |
207 | #define AZX_REG_GTS_GTSCTLAC 0x0C | |
208 | #define AZX_GTS_BASE 0x20 | |
209 | #define AZX_GTS_INTERVAL 0x20 | |
210 | ||
211 | /* registers for Processing Pipe Capability Structure */ | |
212 | #define AZX_PP_CAP_ID 0x3 | |
213 | #define AZX_REG_PP_PPCH 0x10 | |
214 | #define AZX_REG_PP_PPCTL 0x04 | |
215 | #define AZX_PPCTL_PIE (1<<31) | |
216 | #define AZX_PPCTL_GPROCEN (1<<30) | |
217 | /* _X_ = dma engine # and cannot * exceed 29 (per spec max 30 dma engines) */ | |
218 | #define AZX_PPCTL_PROCEN(_X_) (1<<(_X_)) | |
219 | ||
220 | #define AZX_REG_PP_PPSTS 0x08 | |
221 | ||
222 | #define AZX_PPHC_BASE 0x10 | |
223 | #define AZX_PPHC_INTERVAL 0x10 | |
224 | ||
225 | #define AZX_REG_PPHCLLPL 0x0 | |
226 | #define AZX_REG_PPHCLLPU 0x4 | |
227 | #define AZX_REG_PPHCLDPL 0x8 | |
228 | #define AZX_REG_PPHCLDPU 0xC | |
229 | ||
230 | #define AZX_PPLC_BASE 0x10 | |
231 | #define AZX_PPLC_MULTI 0x10 | |
232 | #define AZX_PPLC_INTERVAL 0x10 | |
233 | ||
234 | #define AZX_REG_PPLCCTL 0x0 | |
235 | #define AZX_PPLCCTL_STRM_BITS 4 | |
236 | #define AZX_PPLCCTL_STRM_SHIFT 20 | |
237 | #define AZX_REG_MASK(bit_num, offset) \ | |
238 | (((1 << (bit_num)) - 1) << (offset)) | |
239 | #define AZX_PPLCCTL_STRM_MASK \ | |
240 | AZX_REG_MASK(AZX_PPLCCTL_STRM_BITS, AZX_PPLCCTL_STRM_SHIFT) | |
241 | #define AZX_PPLCCTL_RUN (1<<1) | |
242 | #define AZX_PPLCCTL_STRST (1<<0) | |
243 | ||
244 | #define AZX_REG_PPLCFMT 0x4 | |
245 | #define AZX_REG_PPLCLLPL 0x8 | |
246 | #define AZX_REG_PPLCLLPU 0xC | |
247 | ||
248 | /* registers for Multiple Links Capability Structure */ | |
249 | #define AZX_ML_CAP_ID 0x2 | |
250 | #define AZX_REG_ML_MLCH 0x00 | |
251 | #define AZX_REG_ML_MLCD 0x04 | |
252 | #define AZX_ML_BASE 0x40 | |
253 | #define AZX_ML_INTERVAL 0x40 | |
254 | ||
255 | #define AZX_REG_ML_LCAP 0x00 | |
256 | #define AZX_REG_ML_LCTL 0x04 | |
257 | #define AZX_REG_ML_LOSIDV 0x08 | |
258 | #define AZX_REG_ML_LSDIID 0x0C | |
259 | #define AZX_REG_ML_LPSOO 0x10 | |
260 | #define AZX_REG_ML_LPSIO 0x12 | |
261 | #define AZX_REG_ML_LWALFC 0x18 | |
262 | #define AZX_REG_ML_LOUTPAY 0x20 | |
263 | #define AZX_REG_ML_LINPAY 0x30 | |
264 | ||
dde5bff5 LY |
265 | #define ML_LCTL_SCF_MASK 0xF |
266 | #define AZX_MLCTL_SPA (0x1 << 16) | |
267 | #define AZX_MLCTL_CPA (0x1 << 23) | |
268 | #define AZX_MLCTL_SPA_SHIFT 16 | |
269 | #define AZX_MLCTL_CPA_SHIFT 23 | |
a9c48f7f JK |
270 | |
271 | /* registers for DMA Resume Capability Structure */ | |
272 | #define AZX_DRSM_CAP_ID 0x5 | |
273 | #define AZX_REG_DRSM_CTL 0x4 | |
274 | /* Base used to calculate the iterating register offset */ | |
275 | #define AZX_DRSM_BASE 0x08 | |
276 | /* Interval used to calculate the iterating register offset */ | |
277 | #define AZX_DRSM_INTERVAL 0x08 | |
278 | ||
50279d9b GS |
279 | /* Global time synchronization registers */ |
280 | #define GTSCC_TSCCD_MASK 0x80000000 | |
281 | #define GTSCC_TSCCD_SHIFT BIT(31) | |
282 | #define GTSCC_TSCCI_MASK 0x20 | |
283 | #define GTSCC_CDMAS_DMA_DIR_SHIFT 4 | |
284 | ||
285 | #define WALFCC_CIF_MASK 0x1FF | |
286 | #define WALFCC_FN_SHIFT 9 | |
287 | #define HDA_CLK_CYCLES_PER_FRAME 512 | |
288 | ||
289 | /* | |
290 | * An error occurs near frame "rollover". The clocks in frame value indicates | |
291 | * whether this error may have occurred. Here we use the value of 10. Please | |
292 | * see the errata for the right number [<10] | |
293 | */ | |
294 | #define HDA_MAX_CYCLE_VALUE 499 | |
295 | #define HDA_MAX_CYCLE_OFFSET 10 | |
296 | #define HDA_MAX_CYCLE_READ_RETRY 10 | |
297 | ||
298 | #define TSCCU_CCU_SHIFT 32 | |
299 | #define LLPC_CCU_SHIFT 32 | |
300 | ||
301 | ||
14752412 TI |
302 | /* |
303 | * helpers to read the stream position | |
304 | */ | |
305 | static inline unsigned int | |
306 | snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream) | |
307 | { | |
308 | return snd_hdac_stream_readl(stream, SD_LPIB); | |
309 | } | |
310 | ||
311 | static inline unsigned int | |
312 | snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream) | |
313 | { | |
314 | return le32_to_cpu(*stream->posbuf); | |
315 | } | |
316 | ||
317 | #endif /* __SOUND_HDA_REGISTER_H */ |