[linux-2.6-block.git] / include / scsi / scsi_transport_sas.h

#ifndef SCSI_TRANSPORT_SAS_H
#define SCSI_TRANSPORT_SAS_H

#include <linux/transport_class.h>
#include <linux/types.h>
#include <linux/mutex.h>

struct scsi_transport_template;
struct sas_rphy;


enum sas_device_type {
	SAS_PHY_UNUSED,
	SAS_END_DEVICE,
	SAS_EDGE_EXPANDER_DEVICE,
	SAS_FANOUT_EXPANDER_DEVICE,
};

enum sas_protocol {
	SAS_PROTOCOL_SATA		= 0x01,
	SAS_PROTOCOL_SMP		= 0x02,
	SAS_PROTOCOL_STP		= 0x04,
	SAS_PROTOCOL_SSP		= 0x08,
};

enum sas_linkrate {
	SAS_LINK_RATE_UNKNOWN,
	SAS_PHY_DISABLED,
	SAS_LINK_RATE_FAILED,
	SAS_SATA_SPINUP_HOLD,
	SAS_SATA_PORT_SELECTOR,
	SAS_LINK_RATE_1_5_GBPS,
	SAS_LINK_RATE_3_0_GBPS,
	SAS_LINK_RATE_6_0_GBPS,
	SAS_LINK_VIRTUAL,
};

struct sas_identify {
	enum sas_device_type	device_type;
	enum sas_protocol	initiator_port_protocols;
	enum sas_protocol	target_port_protocols;
	u64			sas_address;
	u8			phy_identifier;
};

struct sas_phy {
	struct device		dev;
	int			number;

	/* phy identification */
	struct sas_identify	identify;

	/* phy attributes */
	enum sas_linkrate	negotiated_linkrate;
	enum sas_linkrate	minimum_linkrate_hw;
	enum sas_linkrate	minimum_linkrate;
	enum sas_linkrate	maximum_linkrate_hw;
	enum sas_linkrate	maximum_linkrate;

	/* internal state */
	unsigned int		local_attached : 1;

	/* link error statistics */
	u32			invalid_dword_count;
	u32			running_disparity_error_count;
	u32			loss_of_dword_sync_count;
	u32			phy_reset_problem_count;

	/* for the list of phys belonging to a port */
	struct list_head	port_siblings;
};

#define dev_to_phy(d) \
	container_of((d), struct sas_phy, dev)
#define transport_class_to_phy(cdev) \
	dev_to_phy((cdev)->dev)
#define phy_to_shost(phy) \
	dev_to_shost((phy)->dev.parent)

struct sas_rphy {
	struct device		dev;
	struct sas_identify	identify;
	struct list_head	list;
	u32			scsi_target_id;
};

#define dev_to_rphy(d) \
	container_of((d), struct sas_rphy, dev)
#define transport_class_to_rphy(cdev) \
	dev_to_rphy((cdev)->dev)
#define rphy_to_shost(rphy) \
	dev_to_shost((rphy)->dev.parent)
#define target_to_rphy(targ) \
	dev_to_rphy((targ)->dev.parent)

struct sas_end_device {
	struct sas_rphy		rphy;
	/* flags */
	unsigned		ready_led_meaning:1;
	/* parameters */
	u16			I_T_nexus_loss_timeout;
	u16			initiator_response_timeout;
};
#define rphy_to_end_device(r) \
	container_of((r), struct sas_end_device, rphy)

struct sas_expander_device {
	int    level;
	int    next_port_id;

	#define SAS_EXPANDER_VENDOR_ID_LEN	8
	char   vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
	#define SAS_EXPANDER_PRODUCT_ID_LEN	16
	char   product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
	#define SAS_EXPANDER_PRODUCT_REV_LEN	4
	char   product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
	#define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN	8
	char   component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
	u16    component_id;
	u8     component_revision_id;

	struct sas_rphy		rphy;

};
#define rphy_to_expander_device(r) \
	container_of((r), struct sas_expander_device, rphy)

struct sas_port {
	struct device		dev;

	int			port_identifier;
	int			num_phys;

	/* the other end of the link */
	struct sas_rphy		*rphy;

	struct mutex		phy_list_mutex;
	struct list_head	phy_list;
};

#define dev_to_sas_port(d) \
	container_of((d), struct sas_port, dev)
#define transport_class_to_sas_port(cdev) \
	dev_to_sas_port((cdev)->dev)

/* The functions by which the transport class and the driver communicate */
struct sas_function_template {
	int (*get_linkerrors)(struct sas_phy *);
	int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
	int (*get_bay_identifier)(struct sas_rphy *);
	int (*phy_reset)(struct sas_phy *, int);
};


void sas_remove_children(struct device *);
extern void sas_remove_host(struct Scsi_Host *);

extern struct sas_phy *sas_phy_alloc(struct device *, int);
extern void sas_phy_free(struct sas_phy *);
extern int sas_phy_add(struct sas_phy *);
extern void sas_phy_delete(struct sas_phy *);
extern int scsi_is_sas_phy(const struct device *);

extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
void sas_rphy_free(struct sas_rphy *);
extern int sas_rphy_add(struct sas_rphy *);
extern void sas_rphy_delete(struct sas_rphy *);
extern int scsi_is_sas_rphy(const struct device *);

struct sas_port *sas_port_alloc(struct device *, int);
struct sas_port *sas_port_alloc_num(struct device *);
int sas_port_add(struct sas_port *);
void sas_port_free(struct sas_port *);
void sas_port_delete(struct sas_port *);
void sas_port_add_phy(struct sas_port *, struct sas_phy *);
void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
int scsi_is_sas_port(const struct device *);

extern struct scsi_transport_template *
sas_attach_transport(struct sas_function_template *);
extern void sas_release_transport(struct scsi_transport_template *);
int sas_read_port_mode_page(struct scsi_device *);

static inline int
scsi_is_sas_expander_device(struct device *dev)
{
	struct sas_rphy *rphy;
	if (!scsi_is_sas_rphy(dev))
		return 0;
	rphy = dev_to_rphy(dev);
	return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
		rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
}

#endif /* SCSI_TRANSPORT_SAS_H */
Commit	Line	Data
c7ebbbce CH	1	#ifndef SCSI_TRANSPORT_SAS_H
	2	#define SCSI_TRANSPORT_SAS_H
	3
	4	#include <linux/transport_class.h>
	5	#include <linux/types.h>
65c92b09	6	#include <linux/mutex.h>
c7ebbbce CH	7
	8	struct scsi_transport_template;
	9	struct sas_rphy;
	10
	11
	12	enum sas_device_type {
	13	SAS_PHY_UNUSED,
	14	SAS_END_DEVICE,
	15	SAS_EDGE_EXPANDER_DEVICE,
	16	SAS_FANOUT_EXPANDER_DEVICE,
	17	};
	18
	19	enum sas_protocol {
	20	SAS_PROTOCOL_SATA = 0x01,
	21	SAS_PROTOCOL_SMP = 0x02,
	22	SAS_PROTOCOL_STP = 0x04,
	23	SAS_PROTOCOL_SSP = 0x08,
	24	};
	25
	26	enum sas_linkrate {
	27	SAS_LINK_RATE_UNKNOWN,
	28	SAS_PHY_DISABLED,
	29	SAS_LINK_RATE_FAILED,
	30	SAS_SATA_SPINUP_HOLD,
	31	SAS_SATA_PORT_SELECTOR,
	32	SAS_LINK_RATE_1_5_GBPS,
	33	SAS_LINK_RATE_3_0_GBPS,
7e6dff62	34	SAS_LINK_RATE_6_0_GBPS,
c7ebbbce CH	35	SAS_LINK_VIRTUAL,
	36	};
	37
	38	struct sas_identify {
	39	enum sas_device_type device_type;
	40	enum sas_protocol initiator_port_protocols;
	41	enum sas_protocol target_port_protocols;
	42	u64 sas_address;
	43	u8 phy_identifier;
	44	};
	45
c7ebbbce CH	46	struct sas_phy {
	47	struct device dev;
	48	int number;
c3ee74c4 CH	49
c3ee74c4 CH	50	/* phy identification */
c7ebbbce	51	struct sas_identify identify;
c3ee74c4 CH	52
c3ee74c4 CH	53	/* phy attributes */
c7ebbbce CH	54	enum sas_linkrate negotiated_linkrate;
	55	enum sas_linkrate minimum_linkrate_hw;
	56	enum sas_linkrate minimum_linkrate;
	57	enum sas_linkrate maximum_linkrate_hw;
	58	enum sas_linkrate maximum_linkrate;
c3ee74c4	59
ac01bbbd CH	60	/* internal state */
	61	unsigned int local_attached : 1;
	62
c3ee74c4 CH	63	/* link error statistics */
	64	u32 invalid_dword_count;
	65	u32 running_disparity_error_count;
	66	u32 loss_of_dword_sync_count;
	67	u32 phy_reset_problem_count;
	68
65c92b09 JB	69	/* for the list of phys belonging to a port */
65c92b09 JB	70	struct list_head port_siblings;
c7ebbbce CH	71	};
	72
	73	#define dev_to_phy(d) \
	74	container_of((d), struct sas_phy, dev)
	75	#define transport_class_to_phy(cdev) \
	76	dev_to_phy((cdev)->dev)
	77	#define phy_to_shost(phy) \
	78	dev_to_shost((phy)->dev.parent)
	79
	80	struct sas_rphy {
	81	struct device dev;
	82	struct sas_identify identify;
	83	struct list_head list;
	84	u32 scsi_target_id;
	85	};
	86
	87	#define dev_to_rphy(d) \
	88	container_of((d), struct sas_rphy, dev)
	89	#define transport_class_to_rphy(cdev) \
	90	dev_to_rphy((cdev)->dev)
	91	#define rphy_to_shost(rphy) \
	92	dev_to_shost((rphy)->dev.parent)
42ab0360 JB	93	#define target_to_rphy(targ) \
	94	dev_to_rphy((targ)->dev.parent)
	95
	96	struct sas_end_device {
	97	struct sas_rphy rphy;
	98	/* flags */
	99	unsigned ready_led_meaning:1;
	100	/* parameters */
	101	u16 I_T_nexus_loss_timeout;
	102	u16 initiator_response_timeout;
	103	};
	104	#define rphy_to_end_device(r) \
	105	container_of((r), struct sas_end_device, rphy)
c7ebbbce	106
79cb1819 JB	107	struct sas_expander_device {
79cb1819 JB	108	int level;
c9fefeb2	109	int next_port_id;
79cb1819 JB	110
	111	#define SAS_EXPANDER_VENDOR_ID_LEN 8
	112	char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
	113	#define SAS_EXPANDER_PRODUCT_ID_LEN 16
	114	char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
	115	#define SAS_EXPANDER_PRODUCT_REV_LEN 4
	116	char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
	117	#define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8
	118	char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
	119	u16 component_id;
	120	u8 component_revision_id;
	121
	122	struct sas_rphy rphy;
	123
	124	};
	125	#define rphy_to_expander_device(r) \
	126	container_of((r), struct sas_expander_device, rphy)
c3ee74c4	127
65c92b09 JB	128	struct sas_port {
	129	struct device dev;
	130
c9fefeb2	131	int port_identifier;
65c92b09 JB	132	int num_phys;
	133
	134	/* the other end of the link */
	135	struct sas_rphy *rphy;
	136
	137	struct mutex phy_list_mutex;
	138	struct list_head phy_list;
	139	};
	140
	141	#define dev_to_sas_port(d) \
	142	container_of((d), struct sas_port, dev)
	143	#define transport_class_to_sas_port(cdev) \
	144	dev_to_sas_port((cdev)->dev)
	145
c3ee74c4 CH	146	/* The functions by which the transport class and the driver communicate */
	147	struct sas_function_template {
	148	int (get_linkerrors)(struct sas_phy );
a0125641 CH	149	int (get_enclosure_identifier)(struct sas_rphy , u64 *);
a0125641 CH	150	int (get_bay_identifier)(struct sas_rphy );
07ba3a95	151	int (phy_reset)(struct sas_phy , int);
c3ee74c4 CH	152	};
	153
	154
65c92b09	155	void sas_remove_children(struct device *);
c7ebbbce CH	156	extern void sas_remove_host(struct Scsi_Host *);
	157
	158	extern struct sas_phy sas_phy_alloc(struct device , int);
	159	extern void sas_phy_free(struct sas_phy *);
	160	extern int sas_phy_add(struct sas_phy *);
	161	extern void sas_phy_delete(struct sas_phy *);
	162	extern int scsi_is_sas_phy(const struct device *);
	163
65c92b09 JB	164	extern struct sas_rphy sas_end_device_alloc(struct sas_port );
65c92b09 JB	165	extern struct sas_rphy sas_expander_alloc(struct sas_port , enum sas_device_type);
c7ebbbce CH	166	void sas_rphy_free(struct sas_rphy *);
	167	extern int sas_rphy_add(struct sas_rphy *);
	168	extern void sas_rphy_delete(struct sas_rphy *);
	169	extern int scsi_is_sas_rphy(const struct device *);
	170
65c92b09	171	struct sas_port sas_port_alloc(struct device , int);
c9fefeb2	172	struct sas_port sas_port_alloc_num(struct device );
65c92b09 JB	173	int sas_port_add(struct sas_port *);
	174	void sas_port_free(struct sas_port *);
	175	void sas_port_delete(struct sas_port *);
	176	void sas_port_add_phy(struct sas_port , struct sas_phy );
	177	void sas_port_delete_phy(struct sas_port , struct sas_phy );
	178	int scsi_is_sas_port(const struct device *);
	179
c7ebbbce CH	180	extern struct scsi_transport_template *
	181	sas_attach_transport(struct sas_function_template *);
	182	extern void sas_release_transport(struct scsi_transport_template *);
42ab0360	183	int sas_read_port_mode_page(struct scsi_device *);
c7ebbbce	184
79cb1819 JB	185	static inline int
	186	scsi_is_sas_expander_device(struct device *dev)
	187	{
	188	struct sas_rphy *rphy;
	189	if (!scsi_is_sas_rphy(dev))
	190	return 0;
	191	rphy = dev_to_rphy(dev);
	192	return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE \|\|
	193	rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
	194	}
	195
c7ebbbce	196	#endif /* SCSI_TRANSPORT_SAS_H */