[linux-block.git] / include / scsi / scsi_cmnd.h

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _SCSI_SCSI_CMND_H
#define _SCSI_SCSI_CMND_H

#include <linux/dma-mapping.h>
#include <linux/blkdev.h>
#include <linux/t10-pi.h>
#include <linux/list.h>
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/scatterlist.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_request.h>

struct Scsi_Host;
struct scsi_driver;

/*
 * MAX_COMMAND_SIZE is:
 * The longest fixed-length SCSI CDB as per the SCSI standard.
 * fixed-length means: commands that their size can be determined
 * by their opcode and the CDB does not carry a length specifier, (unlike
 * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
 * true and the SCSI standard also defines extended commands and
 * vendor specific commands that can be bigger than 16 bytes. The kernel
 * will support these using the same infrastructure used for VARLEN CDB's.
 * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
 * supports without specifying a cmd_len by ULD's
 */
#define MAX_COMMAND_SIZE 16
#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
#endif

struct scsi_data_buffer {
	struct sg_table table;
	unsigned length;
};

/* embedded in scsi_cmnd */
struct scsi_pointer {
	char *ptr;		/* data pointer */
	int this_residual;	/* left in this buffer */
	struct scatterlist *buffer;	/* which buffer */
	int buffers_residual;	/* how many buffers left */

        dma_addr_t dma_handle;

	volatile int Status;
	volatile int Message;
	volatile int have_data_in;
	volatile int sent_command;
	volatile int phase;
};

/* for scmd->flags */
#define SCMD_TAGGED		(1 << 0)
#define SCMD_UNCHECKED_ISA_DMA	(1 << 1)
#define SCMD_INITIALIZED	(1 << 2)
/* flags preserved across unprep / reprep */
#define SCMD_PRESERVED_FLAGS	(SCMD_UNCHECKED_ISA_DMA | SCMD_INITIALIZED)

/* for scmd->state */
#define SCMD_STATE_COMPLETE	0

struct scsi_cmnd {
	struct scsi_request req;
	struct scsi_device *device;
	struct list_head list;  /* scsi_cmnd participates in queue lists */
	struct list_head eh_entry; /* entry for the host eh_cmd_q */
	struct delayed_work abort_work;

	struct rcu_head rcu;

	int eh_eflags;		/* Used by error handlr */

	/*
	 * This is set to jiffies as it was when the command was first
	 * allocated.  It is used to time how long the command has
	 * been outstanding
	 */
	unsigned long jiffies_at_alloc;

	int retries;
	int allowed;

	unsigned char prot_op;
	unsigned char prot_type;
	unsigned char prot_flags;

	unsigned short cmd_len;
	enum dma_data_direction sc_data_direction;

	/* These elements define the operation we are about to perform */
	unsigned char *cmnd;


	/* These elements define the operation we ultimately want to perform */
	struct scsi_data_buffer sdb;
	struct scsi_data_buffer *prot_sdb;

	unsigned underflow;	/* Return error if less than
				   this amount is transferred */

	unsigned transfersize;	/* How much we are guaranteed to
				   transfer with each SCSI transfer
				   (ie, between disconnect / 
				   reconnects.   Probably == sector
				   size */

	struct request *request;	/* The command we are
				   	   working on */

	unsigned char *sense_buffer;
				/* obtained by REQUEST SENSE when
				 * CHECK CONDITION is received on original
				 * command (auto-sense). Length must be
				 * SCSI_SENSE_BUFFERSIZE bytes. */

	/* Low-level done function - can be used by low-level driver to point
	 *        to completion function.  Not used by mid/upper level code. */
	void (*scsi_done) (struct scsi_cmnd *);

	/*
	 * The following fields can be written to by the host specific code. 
	 * Everything else should be left alone. 
	 */
	struct scsi_pointer SCp;	/* Scratchpad used by some host adapters */

	unsigned char *host_scribble;	/* The host adapter is allowed to
					 * call scsi_malloc and get some memory
					 * and hang it here.  The host adapter
					 * is also expected to call scsi_free
					 * to release this memory.  (The memory
					 * obtained by scsi_malloc is guaranteed
					 * to be at an address < 16Mb). */

	int result;		/* Status code from lower level driver */
	int flags;		/* Command flags */
	unsigned long state;	/* Command completion state */

	unsigned char tag;	/* SCSI-II queued command tag */
};

/*
 * Return the driver private allocation behind the command.
 * Only works if cmd_size is set in the host template.
 */
static inline void *scsi_cmd_priv(struct scsi_cmnd *cmd)
{
	return cmd + 1;
}

/* make sure not to use it with passthrough commands */
static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
{
	return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
}

extern void scsi_put_command(struct scsi_cmnd *);
extern void scsi_finish_command(struct scsi_cmnd *cmd);

extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
				 size_t *offset, size_t *len);
extern void scsi_kunmap_atomic_sg(void *virt);

extern blk_status_t scsi_init_io(struct scsi_cmnd *cmd);

#ifdef CONFIG_SCSI_DMA
extern int scsi_dma_map(struct scsi_cmnd *cmd);
extern void scsi_dma_unmap(struct scsi_cmnd *cmd);
#else /* !CONFIG_SCSI_DMA */
static inline int scsi_dma_map(struct scsi_cmnd *cmd) { return -ENOSYS; }
static inline void scsi_dma_unmap(struct scsi_cmnd *cmd) { }
#endif /* !CONFIG_SCSI_DMA */

static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd)
{
	return cmd->sdb.table.nents;
}

static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd)
{
	return cmd->sdb.table.sgl;
}

static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd)
{
	return cmd->sdb.length;
}

static inline void scsi_set_resid(struct scsi_cmnd *cmd, int resid)
{
	cmd->req.resid_len = resid;
}

static inline int scsi_get_resid(struct scsi_cmnd *cmd)
{
	return cmd->req.resid_len;
}

#define scsi_for_each_sg(cmd, sg, nseg, __i)			\
	for_each_sg(scsi_sglist(cmd), sg, nseg, __i)

static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd,
					   void *buf, int buflen)
{
	return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
				   buf, buflen);
}

static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
					 void *buf, int buflen)
{
	return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
				 buf, buflen);
}

/*
 * The operations below are hints that tell the controller driver how
 * to handle I/Os with DIF or similar types of protection information.
 */
enum scsi_prot_operations {
	/* Normal I/O */
	SCSI_PROT_NORMAL = 0,

	/* OS-HBA: Protected, HBA-Target: Unprotected */
	SCSI_PROT_READ_INSERT,
	SCSI_PROT_WRITE_STRIP,

	/* OS-HBA: Unprotected, HBA-Target: Protected */
	SCSI_PROT_READ_STRIP,
	SCSI_PROT_WRITE_INSERT,

	/* OS-HBA: Protected, HBA-Target: Protected */
	SCSI_PROT_READ_PASS,
	SCSI_PROT_WRITE_PASS,
};

static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
{
	scmd->prot_op = op;
}

static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd)
{
	return scmd->prot_op;
}

enum scsi_prot_flags {
	SCSI_PROT_TRANSFER_PI		= 1 << 0,
	SCSI_PROT_GUARD_CHECK		= 1 << 1,
	SCSI_PROT_REF_CHECK		= 1 << 2,
	SCSI_PROT_REF_INCREMENT		= 1 << 3,
	SCSI_PROT_IP_CHECKSUM		= 1 << 4,
};

/*
 * The controller usually does not know anything about the target it
 * is communicating with.  However, when DIX is enabled the controller
 * must be know target type so it can verify the protection
 * information passed along with the I/O.
 */
enum scsi_prot_target_type {
	SCSI_PROT_DIF_TYPE0 = 0,
	SCSI_PROT_DIF_TYPE1,
	SCSI_PROT_DIF_TYPE2,
	SCSI_PROT_DIF_TYPE3,
};

static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type)
{
	scmd->prot_type = type;
}

static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
{
	return scmd->prot_type;
}

static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
{
	return blk_rq_pos(scmd->request);
}

static inline unsigned int scsi_prot_interval(struct scsi_cmnd *scmd)
{
	return scmd->device->sector_size;
}

static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
{
	return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0;
}

static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd)
{
	return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL;
}

static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd)
{
	return cmd->prot_sdb;
}

#define scsi_for_each_prot_sg(cmd, sg, nseg, __i)		\
	for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)

static inline void set_msg_byte(struct scsi_cmnd *cmd, char status)
{
	cmd->result = (cmd->result & 0xffff00ff) | (status << 8);
}

static inline void set_host_byte(struct scsi_cmnd *cmd, char status)
{
	cmd->result = (cmd->result & 0xff00ffff) | (status << 16);
}

static inline void set_driver_byte(struct scsi_cmnd *cmd, char status)
{
	cmd->result = (cmd->result & 0x00ffffff) | (status << 24);
}

static inline unsigned scsi_transfer_length(struct scsi_cmnd *scmd)
{
	unsigned int xfer_len = scmd->sdb.length;
	unsigned int prot_interval = scsi_prot_interval(scmd);

	if (scmd->prot_flags & SCSI_PROT_TRANSFER_PI)
		xfer_len += (xfer_len >> ilog2(prot_interval)) * 8;

	return xfer_len;
}

#endif /* _SCSI_SCSI_CMND_H */
Commit	Line	Data
b2441318	1	/* SPDX-License-Identifier: GPL-2.0 */
1da177e4 LT	2	#ifndef _SCSI_SCSI_CMND_H
	3	#define _SCSI_SCSI_CMND_H
	4
	5	#include <linux/dma-mapping.h>
6f9a35e2	6	#include <linux/blkdev.h>
ddd0bc75	7	#include <linux/t10-pi.h>
1da177e4 LT	8	#include <linux/list.h>
1da177e4 LT	9	#include <linux/types.h>
4e57b681	10	#include <linux/timer.h>
c6132da1	11	#include <linux/scatterlist.h>
8846bab1	12	#include <scsi/scsi_device.h>
82ed4db4	13	#include <scsi/scsi_request.h>
1da177e4	14
b58d9154	15	struct Scsi_Host;
18a4d0a2	16	struct scsi_driver;
1da177e4	17
64a87b24 BH	18	/*
	19	* MAX_COMMAND_SIZE is:
	20	* The longest fixed-length SCSI CDB as per the SCSI standard.
	21	* fixed-length means: commands that their size can be determined
	22	* by their opcode and the CDB does not carry a length specifier, (unlike
	23	* the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
	24	* true and the SCSI standard also defines extended commands and
	25	* vendor specific commands that can be bigger than 16 bytes. The kernel
	26	* will support these using the same infrastructure used for VARLEN CDB's.
	27	* So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
	28	* supports without specifying a cmd_len by ULD's
	29	*/
	30	#define MAX_COMMAND_SIZE 16
	31	#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
	32	# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
	33	#endif
	34
30b0c37b BH	35	struct scsi_data_buffer {
	36	struct sg_table table;
	37	unsigned length;
30b0c37b	38	};
1da177e4 LT	39
	40	/* embedded in scsi_cmnd */
	41	struct scsi_pointer {
	42	char ptr; / data pointer */
	43	int this_residual; /* left in this buffer */
	44	struct scatterlist buffer; / which buffer */
	45	int buffers_residual; /* how many buffers left */
	46
	47	dma_addr_t dma_handle;
	48
	49	volatile int Status;
	50	volatile int Message;
	51	volatile int have_data_in;
	52	volatile int sent_command;
	53	volatile int phase;
	54	};
	55
125c99bc CH	56	/* for scmd->flags */
125c99bc CH	57	#define SCMD_TAGGED (1 << 0)
8e688254	58	#define SCMD_UNCHECKED_ISA_DMA (1 << 1)
39051dd8	59	#define SCMD_INITIALIZED (1 << 2)
64104f70 BVA	60	/* flags preserved across unprep / reprep */
64104f70 BVA	61	#define SCMD_PRESERVED_FLAGS (SCMD_UNCHECKED_ISA_DMA \| SCMD_INITIALIZED)
125c99bc	62
f1342709	63	/* for scmd->state */
29cadd2b	64	#define SCMD_STATE_COMPLETE 0
f1342709	65
1da177e4	66	struct scsi_cmnd {
82ed4db4	67	struct scsi_request req;
1da177e4	68	struct scsi_device *device;
1da177e4	69	struct list_head list; /* scsi_cmnd participates in queue lists */
1da177e4	70	struct list_head eh_entry; /* entry for the host eh_cmd_q */
e494f6a7	71	struct delayed_work abort_work;
3be8828f BVA	72
	73	struct rcu_head rcu;
	74
1da177e4	75	int eh_eflags; /* Used by error handlr */
1da177e4	76
b21a4138 JB	77	/*
	78	* This is set to jiffies as it was when the command was first
	79	* allocated. It is used to time how long the command has
	80	* been outstanding
	81	*/
	82	unsigned long jiffies_at_alloc;
1da177e4 LT	83
	84	int retries;
	85	int allowed;
1da177e4	86
db007fc5 MP	87	unsigned char prot_op;
db007fc5 MP	88	unsigned char prot_type;
c611529e	89	unsigned char prot_flags;
db007fc5	90
db4742dd	91	unsigned short cmd_len;
1da177e4	92	enum dma_data_direction sc_data_direction;
1da177e4 LT	93
1da177e4 LT	94	/* These elements define the operation we are about to perform */
64a87b24	95	unsigned char *cmnd;
1da177e4	96
1da177e4 LT	97
1da177e4 LT	98	/* These elements define the operation we ultimately want to perform */
30b0c37b	99	struct scsi_data_buffer sdb;
7027ad72 MP	100	struct scsi_data_buffer *prot_sdb;
7027ad72 MP	101
1da177e4 LT	102	unsigned underflow; /* Return error if less than
1da177e4 LT	103	this amount is transferred */
1da177e4 LT	104
	105	unsigned transfersize; /* How much we are guaranteed to
	106	transfer with each SCSI transfer
	107	(ie, between disconnect /
	108	reconnects. Probably == sector
	109	size */
	110
1da177e4 LT	111	struct request request; / The command we are
	112	working on */
	113
de25deb1	114	unsigned char *sense_buffer;
c67a848c MW	115	/* obtained by REQUEST SENSE when
c67a848c MW	116	* CHECK CONDITION is received on original
704f8392 KC	117	* command (auto-sense). Length must be
704f8392 KC	118	* SCSI_SENSE_BUFFERSIZE bytes. */
1da177e4 LT	119
	120	/* Low-level done function - can be used by low-level driver to point
	121	* to completion function. Not used by mid/upper level code. */
	122	void (scsi_done) (struct scsi_cmnd );
	123
	124	/*
	125	* The following fields can be written to by the host specific code.
	126	* Everything else should be left alone.
	127	*/
	128	struct scsi_pointer SCp; /* Scratchpad used by some host adapters */
	129
	130	unsigned char host_scribble; / The host adapter is allowed to
c67a848c MW	131	* call scsi_malloc and get some memory
	132	* and hang it here. The host adapter
	133	* is also expected to call scsi_free
	134	* to release this memory. (The memory
	135	* obtained by scsi_malloc is guaranteed
	136	* to be at an address < 16Mb). */
1da177e4 LT	137
1da177e4 LT	138	int result; /* Status code from lower level driver */
125c99bc	139	int flags; /* Command flags */
f1342709	140	unsigned long state; /* Command completion state */
1da177e4 LT	141
1da177e4 LT	142	unsigned char tag; /* SCSI-II queued command tag */
1da177e4 LT	143	};
1da177e4 LT	144
b54197c4 CH	145	/*
	146	* Return the driver private allocation behind the command.
	147	* Only works if cmd_size is set in the host template.
	148	*/
	149	static inline void scsi_cmd_priv(struct scsi_cmnd cmd)
	150	{
	151	return cmd + 1;
	152	}
	153
57292b58	154	/* make sure not to use it with passthrough commands */
18a4d0a2 MP	155	static inline struct scsi_driver scsi_cmd_to_driver(struct scsi_cmnd cmd)
18a4d0a2 MP	156	{
329a402c	157	return (struct scsi_driver *)cmd->request->rq_disk->private_data;
18a4d0a2 MP	158	}
18a4d0a2 MP	159
1da177e4	160	extern void scsi_put_command(struct scsi_cmnd *);
1da177e4 LT	161	extern void scsi_finish_command(struct scsi_cmnd *cmd);
1da177e4 LT	162
cdb8c2a6 GL	163	extern void scsi_kmap_atomic_sg(struct scatterlist sg, int sg_count,
	164	size_t offset, size_t len);
	165	extern void scsi_kunmap_atomic_sg(void *virt);
	166
159b2cbf	167	extern blk_status_t scsi_init_io(struct scsi_cmnd *cmd);
b58d9154	168
bff739b6	169	#ifdef CONFIG_SCSI_DMA
824d7b57 FT	170	extern int scsi_dma_map(struct scsi_cmnd *cmd);
824d7b57 FT	171	extern void scsi_dma_unmap(struct scsi_cmnd *cmd);
bff739b6 GU	172	#else /* !CONFIG_SCSI_DMA */
	173	static inline int scsi_dma_map(struct scsi_cmnd *cmd) { return -ENOSYS; }
	174	static inline void scsi_dma_unmap(struct scsi_cmnd *cmd) { }
	175	#endif /* !CONFIG_SCSI_DMA */
824d7b57	176
30b0c37b BH	177	static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd)
	178	{
	179	return cmd->sdb.table.nents;
	180	}
	181
	182	static inline struct scatterlist scsi_sglist(struct scsi_cmnd cmd)
	183	{
	184	return cmd->sdb.table.sgl;
	185	}
	186
	187	static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd)
	188	{
	189	return cmd->sdb.length;
	190	}
824d7b57 FT	191
	192	static inline void scsi_set_resid(struct scsi_cmnd *cmd, int resid)
	193	{
9fa505ad	194	cmd->req.resid_len = resid;
824d7b57 FT	195	}
	196
	197	static inline int scsi_get_resid(struct scsi_cmnd *cmd)
	198	{
9fa505ad	199	return cmd->req.resid_len;
824d7b57 FT	200	}
	201
	202	#define scsi_for_each_sg(cmd, sg, nseg, __i) \
c6132da1	203	for_each_sg(scsi_sglist(cmd), sg, nseg, __i)
824d7b57	204
9ac16b61 FT	205	static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd,
	206	void *buf, int buflen)
	207	{
	208	return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
	209	buf, buflen);
	210	}
	211
	212	static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
	213	void *buf, int buflen)
	214	{
	215	return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
	216	buf, buflen);
	217	}
	218
db007fc5 MP	219	/*
	220	* The operations below are hints that tell the controller driver how
	221	* to handle I/Os with DIF or similar types of protection information.
	222	*/
	223	enum scsi_prot_operations {
	224	/* Normal I/O */
	225	SCSI_PROT_NORMAL = 0,
	226
	227	/* OS-HBA: Protected, HBA-Target: Unprotected */
	228	SCSI_PROT_READ_INSERT,
	229	SCSI_PROT_WRITE_STRIP,
	230
	231	/* OS-HBA: Unprotected, HBA-Target: Protected */
	232	SCSI_PROT_READ_STRIP,
	233	SCSI_PROT_WRITE_INSERT,
	234
	235	/* OS-HBA: Protected, HBA-Target: Protected */
	236	SCSI_PROT_READ_PASS,
	237	SCSI_PROT_WRITE_PASS,
db007fc5 MP	238	};
	239
	240	static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
	241	{
	242	scmd->prot_op = op;
	243	}
	244
	245	static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd)
	246	{
	247	return scmd->prot_op;
	248	}
	249
c611529e MP	250	enum scsi_prot_flags {
	251	SCSI_PROT_TRANSFER_PI = 1 << 0,
	252	SCSI_PROT_GUARD_CHECK = 1 << 1,
	253	SCSI_PROT_REF_CHECK = 1 << 2,
	254	SCSI_PROT_REF_INCREMENT = 1 << 3,
	255	SCSI_PROT_IP_CHECKSUM = 1 << 4,
	256	};
	257
db007fc5 MP	258	/*
	259	* The controller usually does not know anything about the target it
	260	* is communicating with. However, when DIX is enabled the controller
	261	* must be know target type so it can verify the protection
	262	* information passed along with the I/O.
	263	*/
	264	enum scsi_prot_target_type {
	265	SCSI_PROT_DIF_TYPE0 = 0,
	266	SCSI_PROT_DIF_TYPE1,
	267	SCSI_PROT_DIF_TYPE2,
	268	SCSI_PROT_DIF_TYPE3,
	269	};
	270
	271	static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type)
	272	{
	273	scmd->prot_type = type;
	274	}
	275
	276	static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
	277	{
	278	return scmd->prot_type;
	279	}
	280
	281	static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
	282	{
83096ebf	283	return blk_rq_pos(scmd->request);
db007fc5 MP	284	}
db007fc5 MP	285
c611529e MP	286	static inline unsigned int scsi_prot_interval(struct scsi_cmnd *scmd)
	287	{
	288	return scmd->device->sector_size;
	289	}
	290
7027ad72 MP	291	static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
	292	{
	293	return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0;
	294	}
	295
	296	static inline struct scatterlist scsi_prot_sglist(struct scsi_cmnd cmd)
	297	{
	298	return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL;
	299	}
	300
	301	static inline struct scsi_data_buffer scsi_prot(struct scsi_cmnd cmd)
	302	{
	303	return cmd->prot_sdb;
	304	}
	305
	306	#define scsi_for_each_prot_sg(cmd, sg, nseg, __i) \
	307	for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)
	308
f290f197 JB	309	static inline void set_msg_byte(struct scsi_cmnd *cmd, char status)
f290f197 JB	310	{
3384db9e	311	cmd->result = (cmd->result & 0xffff00ff) \| (status << 8);
f290f197 JB	312	}
	313
	314	static inline void set_host_byte(struct scsi_cmnd *cmd, char status)
	315	{
3384db9e	316	cmd->result = (cmd->result & 0xff00ffff) \| (status << 16);
f290f197 JB	317	}
	318
	319	static inline void set_driver_byte(struct scsi_cmnd *cmd, char status)
	320	{
3384db9e	321	cmd->result = (cmd->result & 0x00ffffff) \| (status << 24);
f290f197 JB	322	}
f290f197 JB	323
8846bab1 SG	324	static inline unsigned scsi_transfer_length(struct scsi_cmnd *scmd)
8846bab1 SG	325	{
ae3d56d8	326	unsigned int xfer_len = scmd->sdb.length;
c611529e	327	unsigned int prot_interval = scsi_prot_interval(scmd);
8846bab1	328
c611529e MP	329	if (scmd->prot_flags & SCSI_PROT_TRANSFER_PI)
c611529e MP	330	xfer_len += (xfer_len >> ilog2(prot_interval)) * 8;
8846bab1	331
c611529e	332	return xfer_len;
8846bab1 SG	333	}
8846bab1 SG	334
1da177e4	335	#endif /* _SCSI_SCSI_CMND_H */