Commit | Line | Data |
---|---|---|
704232c2 JB |
1 | #ifndef __NET_CFG80211_H |
2 | #define __NET_CFG80211_H | |
d3236553 JB |
3 | /* |
4 | * 802.11 device and configuration interface | |
5 | * | |
026331c4 | 6 | * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> |
d3236553 JB |
7 | * |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License version 2 as | |
10 | * published by the Free Software Foundation. | |
11 | */ | |
704232c2 | 12 | |
d3236553 JB |
13 | #include <linux/netdevice.h> |
14 | #include <linux/debugfs.h> | |
15 | #include <linux/list.h> | |
187f1882 | 16 | #include <linux/bug.h> |
704232c2 JB |
17 | #include <linux/netlink.h> |
18 | #include <linux/skbuff.h> | |
55682965 | 19 | #include <linux/nl80211.h> |
2a519311 JB |
20 | #include <linux/if_ether.h> |
21 | #include <linux/ieee80211.h> | |
2a0e047e | 22 | #include <linux/net.h> |
d3236553 JB |
23 | #include <net/regulatory.h> |
24 | ||
d70e9693 JB |
25 | /** |
26 | * DOC: Introduction | |
27 | * | |
28 | * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges | |
29 | * userspace and drivers, and offers some utility functionality associated | |
30 | * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used | |
31 | * by all modern wireless drivers in Linux, so that they offer a consistent | |
32 | * API through nl80211. For backward compatibility, cfg80211 also offers | |
33 | * wireless extensions to userspace, but hides them from drivers completely. | |
34 | * | |
35 | * Additionally, cfg80211 contains code to help enforce regulatory spectrum | |
36 | * use restrictions. | |
37 | */ | |
38 | ||
39 | ||
40 | /** | |
41 | * DOC: Device registration | |
42 | * | |
43 | * In order for a driver to use cfg80211, it must register the hardware device | |
44 | * with cfg80211. This happens through a number of hardware capability structs | |
45 | * described below. | |
46 | * | |
47 | * The fundamental structure for each device is the 'wiphy', of which each | |
48 | * instance describes a physical wireless device connected to the system. Each | |
49 | * such wiphy can have zero, one, or many virtual interfaces associated with | |
50 | * it, which need to be identified as such by pointing the network interface's | |
51 | * @ieee80211_ptr pointer to a &struct wireless_dev which further describes | |
52 | * the wireless part of the interface, normally this struct is embedded in the | |
53 | * network interface's private data area. Drivers can optionally allow creating | |
54 | * or destroying virtual interfaces on the fly, but without at least one or the | |
55 | * ability to create some the wireless device isn't useful. | |
56 | * | |
57 | * Each wiphy structure contains device capability information, and also has | |
58 | * a pointer to the various operations the driver offers. The definitions and | |
59 | * structures here describe these capabilities in detail. | |
60 | */ | |
61 | ||
9f5e8f6e JB |
62 | struct wiphy; |
63 | ||
704232c2 | 64 | /* |
d3236553 JB |
65 | * wireless hardware capability structures |
66 | */ | |
67 | ||
68 | /** | |
69 | * enum ieee80211_band - supported frequency bands | |
70 | * | |
71 | * The bands are assigned this way because the supported | |
72 | * bitrates differ in these bands. | |
704232c2 | 73 | * |
d3236553 JB |
74 | * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band |
75 | * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) | |
3a0c52a6 | 76 | * @IEEE80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) |
abe37c4b | 77 | * @IEEE80211_NUM_BANDS: number of defined bands |
704232c2 | 78 | */ |
d3236553 | 79 | enum ieee80211_band { |
13ae75b1 JM |
80 | IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ, |
81 | IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ, | |
3a0c52a6 | 82 | IEEE80211_BAND_60GHZ = NL80211_BAND_60GHZ, |
d3236553 JB |
83 | |
84 | /* keep last */ | |
85 | IEEE80211_NUM_BANDS | |
86 | }; | |
704232c2 | 87 | |
2ec600d6 | 88 | /** |
d3236553 JB |
89 | * enum ieee80211_channel_flags - channel flags |
90 | * | |
91 | * Channel flags set by the regulatory control code. | |
92 | * | |
93 | * @IEEE80211_CHAN_DISABLED: This channel is disabled. | |
94 | * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted | |
95 | * on this channel. | |
96 | * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. | |
97 | * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. | |
689da1b3 | 98 | * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel |
d3236553 | 99 | * is not permitted. |
689da1b3 | 100 | * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel |
d3236553 | 101 | * is not permitted. |
03f6b084 | 102 | * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel. |
c7a6ee27 JB |
103 | * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band, |
104 | * this flag indicates that an 80 MHz channel cannot use this | |
105 | * channel as the control or any of the secondary channels. | |
106 | * This may be due to the driver or due to regulatory bandwidth | |
107 | * restrictions. | |
108 | * @IEEE80211_CHAN_NO_160MHZ: If the driver supports 160 MHz on the band, | |
109 | * this flag indicates that an 160 MHz channel cannot use this | |
110 | * channel as the control or any of the secondary channels. | |
111 | * This may be due to the driver or due to regulatory bandwidth | |
112 | * restrictions. | |
2ec600d6 | 113 | */ |
d3236553 JB |
114 | enum ieee80211_channel_flags { |
115 | IEEE80211_CHAN_DISABLED = 1<<0, | |
116 | IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, | |
117 | IEEE80211_CHAN_NO_IBSS = 1<<2, | |
118 | IEEE80211_CHAN_RADAR = 1<<3, | |
689da1b3 LR |
119 | IEEE80211_CHAN_NO_HT40PLUS = 1<<4, |
120 | IEEE80211_CHAN_NO_HT40MINUS = 1<<5, | |
03f6b084 | 121 | IEEE80211_CHAN_NO_OFDM = 1<<6, |
c7a6ee27 JB |
122 | IEEE80211_CHAN_NO_80MHZ = 1<<7, |
123 | IEEE80211_CHAN_NO_160MHZ = 1<<8, | |
2ec600d6 LCC |
124 | }; |
125 | ||
038659e7 | 126 | #define IEEE80211_CHAN_NO_HT40 \ |
689da1b3 | 127 | (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) |
038659e7 | 128 | |
04f39047 SW |
129 | #define IEEE80211_DFS_MIN_CAC_TIME_MS 60000 |
130 | #define IEEE80211_DFS_MIN_NOP_TIME_MS (30 * 60 * 1000) | |
131 | ||
d3236553 JB |
132 | /** |
133 | * struct ieee80211_channel - channel definition | |
134 | * | |
135 | * This structure describes a single channel for use | |
136 | * with cfg80211. | |
137 | * | |
138 | * @center_freq: center frequency in MHz | |
d3236553 JB |
139 | * @hw_value: hardware-specific value for the channel |
140 | * @flags: channel flags from &enum ieee80211_channel_flags. | |
141 | * @orig_flags: channel flags at registration time, used by regulatory | |
142 | * code to support devices with additional restrictions | |
143 | * @band: band this channel belongs to. | |
144 | * @max_antenna_gain: maximum antenna gain in dBi | |
145 | * @max_power: maximum transmission power (in dBm) | |
eccc068e | 146 | * @max_reg_power: maximum regulatory transmission power (in dBm) |
d3236553 JB |
147 | * @beacon_found: helper to regulatory code to indicate when a beacon |
148 | * has been found on this channel. Use regulatory_hint_found_beacon() | |
77c2061d | 149 | * to enable this, this is useful only on 5 GHz band. |
d3236553 JB |
150 | * @orig_mag: internal use |
151 | * @orig_mpwr: internal use | |
04f39047 SW |
152 | * @dfs_state: current state of this channel. Only relevant if radar is required |
153 | * on this channel. | |
154 | * @dfs_state_entered: timestamp (jiffies) when the dfs state was entered. | |
179f831b | 155 | */ |
d3236553 JB |
156 | struct ieee80211_channel { |
157 | enum ieee80211_band band; | |
158 | u16 center_freq; | |
d3236553 JB |
159 | u16 hw_value; |
160 | u32 flags; | |
161 | int max_antenna_gain; | |
162 | int max_power; | |
eccc068e | 163 | int max_reg_power; |
d3236553 JB |
164 | bool beacon_found; |
165 | u32 orig_flags; | |
166 | int orig_mag, orig_mpwr; | |
04f39047 SW |
167 | enum nl80211_dfs_state dfs_state; |
168 | unsigned long dfs_state_entered; | |
d3236553 JB |
169 | }; |
170 | ||
179f831b | 171 | /** |
d3236553 JB |
172 | * enum ieee80211_rate_flags - rate flags |
173 | * | |
174 | * Hardware/specification flags for rates. These are structured | |
175 | * in a way that allows using the same bitrate structure for | |
176 | * different bands/PHY modes. | |
177 | * | |
178 | * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short | |
179 | * preamble on this bitrate; only relevant in 2.4GHz band and | |
180 | * with CCK rates. | |
181 | * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate | |
182 | * when used with 802.11a (on the 5 GHz band); filled by the | |
183 | * core code when registering the wiphy. | |
184 | * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate | |
185 | * when used with 802.11b (on the 2.4 GHz band); filled by the | |
186 | * core code when registering the wiphy. | |
187 | * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate | |
188 | * when used with 802.11g (on the 2.4 GHz band); filled by the | |
189 | * core code when registering the wiphy. | |
190 | * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. | |
30e74732 SW |
191 | * @IEEE80211_RATE_SUPPORTS_5MHZ: Rate can be used in 5 MHz mode |
192 | * @IEEE80211_RATE_SUPPORTS_10MHZ: Rate can be used in 10 MHz mode | |
179f831b | 193 | */ |
d3236553 JB |
194 | enum ieee80211_rate_flags { |
195 | IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, | |
196 | IEEE80211_RATE_MANDATORY_A = 1<<1, | |
197 | IEEE80211_RATE_MANDATORY_B = 1<<2, | |
198 | IEEE80211_RATE_MANDATORY_G = 1<<3, | |
199 | IEEE80211_RATE_ERP_G = 1<<4, | |
30e74732 SW |
200 | IEEE80211_RATE_SUPPORTS_5MHZ = 1<<5, |
201 | IEEE80211_RATE_SUPPORTS_10MHZ = 1<<6, | |
d3236553 | 202 | }; |
179f831b | 203 | |
d3236553 JB |
204 | /** |
205 | * struct ieee80211_rate - bitrate definition | |
206 | * | |
207 | * This structure describes a bitrate that an 802.11 PHY can | |
208 | * operate with. The two values @hw_value and @hw_value_short | |
209 | * are only for driver use when pointers to this structure are | |
210 | * passed around. | |
211 | * | |
212 | * @flags: rate-specific flags | |
213 | * @bitrate: bitrate in units of 100 Kbps | |
214 | * @hw_value: driver/hardware value for this rate | |
215 | * @hw_value_short: driver/hardware value for this rate when | |
216 | * short preamble is used | |
217 | */ | |
218 | struct ieee80211_rate { | |
219 | u32 flags; | |
220 | u16 bitrate; | |
221 | u16 hw_value, hw_value_short; | |
222 | }; | |
179f831b | 223 | |
d3236553 JB |
224 | /** |
225 | * struct ieee80211_sta_ht_cap - STA's HT capabilities | |
226 | * | |
227 | * This structure describes most essential parameters needed | |
228 | * to describe 802.11n HT capabilities for an STA. | |
229 | * | |
230 | * @ht_supported: is HT supported by the STA | |
231 | * @cap: HT capabilities map as described in 802.11n spec | |
232 | * @ampdu_factor: Maximum A-MPDU length factor | |
233 | * @ampdu_density: Minimum A-MPDU spacing | |
234 | * @mcs: Supported MCS rates | |
235 | */ | |
236 | struct ieee80211_sta_ht_cap { | |
237 | u16 cap; /* use IEEE80211_HT_CAP_ */ | |
238 | bool ht_supported; | |
239 | u8 ampdu_factor; | |
240 | u8 ampdu_density; | |
241 | struct ieee80211_mcs_info mcs; | |
179f831b AG |
242 | }; |
243 | ||
bf0c111e MP |
244 | /** |
245 | * struct ieee80211_sta_vht_cap - STA's VHT capabilities | |
246 | * | |
247 | * This structure describes most essential parameters needed | |
248 | * to describe 802.11ac VHT capabilities for an STA. | |
249 | * | |
250 | * @vht_supported: is VHT supported by the STA | |
251 | * @cap: VHT capabilities map as described in 802.11ac spec | |
252 | * @vht_mcs: Supported VHT MCS rates | |
253 | */ | |
254 | struct ieee80211_sta_vht_cap { | |
255 | bool vht_supported; | |
256 | u32 cap; /* use IEEE80211_VHT_CAP_ */ | |
257 | struct ieee80211_vht_mcs_info vht_mcs; | |
258 | }; | |
259 | ||
d3236553 JB |
260 | /** |
261 | * struct ieee80211_supported_band - frequency band definition | |
262 | * | |
263 | * This structure describes a frequency band a wiphy | |
264 | * is able to operate in. | |
265 | * | |
266 | * @channels: Array of channels the hardware can operate in | |
267 | * in this band. | |
268 | * @band: the band this structure represents | |
269 | * @n_channels: Number of channels in @channels | |
270 | * @bitrates: Array of bitrates the hardware can operate with | |
271 | * in this band. Must be sorted to give a valid "supported | |
272 | * rates" IE, i.e. CCK rates first, then OFDM. | |
273 | * @n_bitrates: Number of bitrates in @bitrates | |
abe37c4b | 274 | * @ht_cap: HT capabilities in this band |
c9a0a302 | 275 | * @vht_cap: VHT capabilities in this band |
d3236553 JB |
276 | */ |
277 | struct ieee80211_supported_band { | |
278 | struct ieee80211_channel *channels; | |
279 | struct ieee80211_rate *bitrates; | |
280 | enum ieee80211_band band; | |
281 | int n_channels; | |
282 | int n_bitrates; | |
283 | struct ieee80211_sta_ht_cap ht_cap; | |
bf0c111e | 284 | struct ieee80211_sta_vht_cap vht_cap; |
d3236553 | 285 | }; |
179f831b | 286 | |
d3236553 JB |
287 | /* |
288 | * Wireless hardware/device configuration structures and methods | |
289 | */ | |
179f831b | 290 | |
d70e9693 JB |
291 | /** |
292 | * DOC: Actions and configuration | |
293 | * | |
294 | * Each wireless device and each virtual interface offer a set of configuration | |
295 | * operations and other actions that are invoked by userspace. Each of these | |
296 | * actions is described in the operations structure, and the parameters these | |
297 | * operations use are described separately. | |
298 | * | |
299 | * Additionally, some operations are asynchronous and expect to get status | |
300 | * information via some functions that drivers need to call. | |
301 | * | |
302 | * Scanning and BSS list handling with its associated functionality is described | |
303 | * in a separate chapter. | |
304 | */ | |
305 | ||
d3236553 JB |
306 | /** |
307 | * struct vif_params - describes virtual interface parameters | |
8b787643 | 308 | * @use_4addr: use 4-address frames |
1c18f145 AS |
309 | * @macaddr: address to use for this virtual interface. This will only |
310 | * be used for non-netdevice interfaces. If this parameter is set | |
311 | * to zero address the driver may determine the address as needed. | |
d3236553 JB |
312 | */ |
313 | struct vif_params { | |
8b787643 | 314 | int use_4addr; |
1c18f145 | 315 | u8 macaddr[ETH_ALEN]; |
d3236553 | 316 | }; |
179f831b | 317 | |
d3236553 | 318 | /** |
41ade00f JB |
319 | * struct key_params - key information |
320 | * | |
321 | * Information about a key | |
322 | * | |
323 | * @key: key material | |
324 | * @key_len: length of key material | |
325 | * @cipher: cipher suite selector | |
326 | * @seq: sequence counter (IV/PN) for TKIP and CCMP keys, only used | |
327 | * with the get_key() callback, must be in little endian, | |
328 | * length given by @seq_len. | |
abe37c4b | 329 | * @seq_len: length of @seq. |
41ade00f JB |
330 | */ |
331 | struct key_params { | |
332 | u8 *key; | |
333 | u8 *seq; | |
334 | int key_len; | |
335 | int seq_len; | |
336 | u32 cipher; | |
337 | }; | |
338 | ||
683b6d3b JB |
339 | /** |
340 | * struct cfg80211_chan_def - channel definition | |
341 | * @chan: the (control) channel | |
3d9d1d66 JB |
342 | * @width: channel width |
343 | * @center_freq1: center frequency of first segment | |
344 | * @center_freq2: center frequency of second segment | |
345 | * (only with 80+80 MHz) | |
683b6d3b JB |
346 | */ |
347 | struct cfg80211_chan_def { | |
348 | struct ieee80211_channel *chan; | |
3d9d1d66 JB |
349 | enum nl80211_chan_width width; |
350 | u32 center_freq1; | |
351 | u32 center_freq2; | |
683b6d3b JB |
352 | }; |
353 | ||
3d9d1d66 JB |
354 | /** |
355 | * cfg80211_get_chandef_type - return old channel type from chandef | |
356 | * @chandef: the channel definition | |
357 | * | |
0ae997dc | 358 | * Return: The old channel type (NOHT, HT20, HT40+/-) from a given |
3d9d1d66 JB |
359 | * chandef, which must have a bandwidth allowing this conversion. |
360 | */ | |
683b6d3b JB |
361 | static inline enum nl80211_channel_type |
362 | cfg80211_get_chandef_type(const struct cfg80211_chan_def *chandef) | |
363 | { | |
3d9d1d66 JB |
364 | switch (chandef->width) { |
365 | case NL80211_CHAN_WIDTH_20_NOHT: | |
366 | return NL80211_CHAN_NO_HT; | |
367 | case NL80211_CHAN_WIDTH_20: | |
368 | return NL80211_CHAN_HT20; | |
369 | case NL80211_CHAN_WIDTH_40: | |
370 | if (chandef->center_freq1 > chandef->chan->center_freq) | |
371 | return NL80211_CHAN_HT40PLUS; | |
372 | return NL80211_CHAN_HT40MINUS; | |
373 | default: | |
374 | WARN_ON(1); | |
375 | return NL80211_CHAN_NO_HT; | |
376 | } | |
683b6d3b JB |
377 | } |
378 | ||
3d9d1d66 JB |
379 | /** |
380 | * cfg80211_chandef_create - create channel definition using channel type | |
381 | * @chandef: the channel definition struct to fill | |
382 | * @channel: the control channel | |
383 | * @chantype: the channel type | |
384 | * | |
385 | * Given a channel type, create a channel definition. | |
386 | */ | |
387 | void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, | |
388 | struct ieee80211_channel *channel, | |
389 | enum nl80211_channel_type chantype); | |
390 | ||
391 | /** | |
392 | * cfg80211_chandef_identical - check if two channel definitions are identical | |
393 | * @chandef1: first channel definition | |
394 | * @chandef2: second channel definition | |
395 | * | |
0ae997dc | 396 | * Return: %true if the channels defined by the channel definitions are |
3d9d1d66 JB |
397 | * identical, %false otherwise. |
398 | */ | |
399 | static inline bool | |
400 | cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1, | |
401 | const struct cfg80211_chan_def *chandef2) | |
402 | { | |
403 | return (chandef1->chan == chandef2->chan && | |
404 | chandef1->width == chandef2->width && | |
405 | chandef1->center_freq1 == chandef2->center_freq1 && | |
406 | chandef1->center_freq2 == chandef2->center_freq2); | |
407 | } | |
408 | ||
409 | /** | |
410 | * cfg80211_chandef_compatible - check if two channel definitions are compatible | |
411 | * @chandef1: first channel definition | |
412 | * @chandef2: second channel definition | |
413 | * | |
0ae997dc | 414 | * Return: %NULL if the given channel definitions are incompatible, |
3d9d1d66 JB |
415 | * chandef1 or chandef2 otherwise. |
416 | */ | |
417 | const struct cfg80211_chan_def * | |
418 | cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, | |
419 | const struct cfg80211_chan_def *chandef2); | |
420 | ||
9f5e8f6e JB |
421 | /** |
422 | * cfg80211_chandef_valid - check if a channel definition is valid | |
423 | * @chandef: the channel definition to check | |
0ae997dc | 424 | * Return: %true if the channel definition is valid. %false otherwise. |
9f5e8f6e JB |
425 | */ |
426 | bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); | |
427 | ||
428 | /** | |
429 | * cfg80211_chandef_usable - check if secondary channels can be used | |
430 | * @wiphy: the wiphy to validate against | |
431 | * @chandef: the channel definition to check | |
0ae997dc YB |
432 | * @prohibited_flags: the regulatory channel flags that must not be set |
433 | * Return: %true if secondary channels are usable. %false otherwise. | |
9f5e8f6e JB |
434 | */ |
435 | bool cfg80211_chandef_usable(struct wiphy *wiphy, | |
436 | const struct cfg80211_chan_def *chandef, | |
437 | u32 prohibited_flags); | |
438 | ||
30e74732 SW |
439 | /** |
440 | * ieee80211_chandef_rate_flags - returns rate flags for a channel | |
441 | * | |
442 | * In some channel types, not all rates may be used - for example CCK | |
443 | * rates may not be used in 5/10 MHz channels. | |
444 | * | |
445 | * @chandef: channel definition for the channel | |
446 | * | |
447 | * Returns: rate flags which apply for this channel | |
448 | */ | |
449 | static inline enum ieee80211_rate_flags | |
450 | ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef) | |
451 | { | |
452 | switch (chandef->width) { | |
453 | case NL80211_CHAN_WIDTH_5: | |
454 | return IEEE80211_RATE_SUPPORTS_5MHZ; | |
455 | case NL80211_CHAN_WIDTH_10: | |
456 | return IEEE80211_RATE_SUPPORTS_10MHZ; | |
457 | default: | |
458 | break; | |
459 | } | |
460 | return 0; | |
461 | } | |
462 | ||
0430c883 SW |
463 | /** |
464 | * ieee80211_chandef_max_power - maximum transmission power for the chandef | |
465 | * | |
466 | * In some regulations, the transmit power may depend on the configured channel | |
467 | * bandwidth which may be defined as dBm/MHz. This function returns the actual | |
468 | * max_power for non-standard (20 MHz) channels. | |
469 | * | |
470 | * @chandef: channel definition for the channel | |
471 | * | |
472 | * Returns: maximum allowed transmission power in dBm for the chandef | |
473 | */ | |
474 | static inline int | |
475 | ieee80211_chandef_max_power(struct cfg80211_chan_def *chandef) | |
476 | { | |
477 | switch (chandef->width) { | |
478 | case NL80211_CHAN_WIDTH_5: | |
479 | return min(chandef->chan->max_reg_power - 6, | |
480 | chandef->chan->max_power); | |
481 | case NL80211_CHAN_WIDTH_10: | |
482 | return min(chandef->chan->max_reg_power - 3, | |
483 | chandef->chan->max_power); | |
484 | default: | |
485 | break; | |
486 | } | |
487 | return chandef->chan->max_power; | |
488 | } | |
489 | ||
61fa713c HS |
490 | /** |
491 | * enum survey_info_flags - survey information flags | |
492 | * | |
abe37c4b | 493 | * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in |
17e5a808 | 494 | * @SURVEY_INFO_IN_USE: channel is currently being used |
8610c29a FF |
495 | * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in |
496 | * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in | |
497 | * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in | |
498 | * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in | |
499 | * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in | |
abe37c4b | 500 | * |
61fa713c HS |
501 | * Used by the driver to indicate which info in &struct survey_info |
502 | * it has filled in during the get_survey(). | |
503 | */ | |
504 | enum survey_info_flags { | |
505 | SURVEY_INFO_NOISE_DBM = 1<<0, | |
17e5a808 | 506 | SURVEY_INFO_IN_USE = 1<<1, |
8610c29a FF |
507 | SURVEY_INFO_CHANNEL_TIME = 1<<2, |
508 | SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3, | |
509 | SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4, | |
510 | SURVEY_INFO_CHANNEL_TIME_RX = 1<<5, | |
511 | SURVEY_INFO_CHANNEL_TIME_TX = 1<<6, | |
61fa713c HS |
512 | }; |
513 | ||
514 | /** | |
515 | * struct survey_info - channel survey response | |
516 | * | |
61fa713c HS |
517 | * @channel: the channel this survey record reports, mandatory |
518 | * @filled: bitflag of flags from &enum survey_info_flags | |
519 | * @noise: channel noise in dBm. This and all following fields are | |
ad24b0da | 520 | * optional |
8610c29a FF |
521 | * @channel_time: amount of time in ms the radio spent on the channel |
522 | * @channel_time_busy: amount of time the primary channel was sensed busy | |
523 | * @channel_time_ext_busy: amount of time the extension channel was sensed busy | |
524 | * @channel_time_rx: amount of time the radio spent receiving data | |
525 | * @channel_time_tx: amount of time the radio spent transmitting data | |
61fa713c | 526 | * |
abe37c4b JB |
527 | * Used by dump_survey() to report back per-channel survey information. |
528 | * | |
61fa713c HS |
529 | * This structure can later be expanded with things like |
530 | * channel duty cycle etc. | |
531 | */ | |
532 | struct survey_info { | |
533 | struct ieee80211_channel *channel; | |
8610c29a FF |
534 | u64 channel_time; |
535 | u64 channel_time_busy; | |
536 | u64 channel_time_ext_busy; | |
537 | u64 channel_time_rx; | |
538 | u64 channel_time_tx; | |
61fa713c HS |
539 | u32 filled; |
540 | s8 noise; | |
541 | }; | |
542 | ||
5fb628e9 JM |
543 | /** |
544 | * struct cfg80211_crypto_settings - Crypto settings | |
545 | * @wpa_versions: indicates which, if any, WPA versions are enabled | |
546 | * (from enum nl80211_wpa_versions) | |
547 | * @cipher_group: group key cipher suite (or 0 if unset) | |
548 | * @n_ciphers_pairwise: number of AP supported unicast ciphers | |
549 | * @ciphers_pairwise: unicast key cipher suites | |
550 | * @n_akm_suites: number of AKM suites | |
551 | * @akm_suites: AKM suites | |
552 | * @control_port: Whether user space controls IEEE 802.1X port, i.e., | |
553 | * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is | |
554 | * required to assume that the port is unauthorized until authorized by | |
555 | * user space. Otherwise, port is marked authorized by default. | |
556 | * @control_port_ethertype: the control port protocol that should be | |
557 | * allowed through even on unauthorized ports | |
558 | * @control_port_no_encrypt: TRUE to prevent encryption of control port | |
559 | * protocol frames. | |
560 | */ | |
561 | struct cfg80211_crypto_settings { | |
562 | u32 wpa_versions; | |
563 | u32 cipher_group; | |
564 | int n_ciphers_pairwise; | |
565 | u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; | |
566 | int n_akm_suites; | |
567 | u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; | |
568 | bool control_port; | |
569 | __be16 control_port_ethertype; | |
570 | bool control_port_no_encrypt; | |
571 | }; | |
572 | ||
ed1b6cc7 | 573 | /** |
8860020e | 574 | * struct cfg80211_beacon_data - beacon data |
ed1b6cc7 | 575 | * @head: head portion of beacon (before TIM IE) |
ad24b0da | 576 | * or %NULL if not changed |
ed1b6cc7 | 577 | * @tail: tail portion of beacon (after TIM IE) |
ad24b0da | 578 | * or %NULL if not changed |
ed1b6cc7 JB |
579 | * @head_len: length of @head |
580 | * @tail_len: length of @tail | |
9946ecfb JM |
581 | * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL |
582 | * @beacon_ies_len: length of beacon_ies in octets | |
583 | * @proberesp_ies: extra information element(s) to add into Probe Response | |
584 | * frames or %NULL | |
585 | * @proberesp_ies_len: length of proberesp_ies in octets | |
586 | * @assocresp_ies: extra information element(s) to add into (Re)Association | |
587 | * Response frames or %NULL | |
588 | * @assocresp_ies_len: length of assocresp_ies in octets | |
00f740e1 AN |
589 | * @probe_resp_len: length of probe response template (@probe_resp) |
590 | * @probe_resp: probe response template (AP mode only) | |
ed1b6cc7 | 591 | */ |
8860020e JB |
592 | struct cfg80211_beacon_data { |
593 | const u8 *head, *tail; | |
594 | const u8 *beacon_ies; | |
595 | const u8 *proberesp_ies; | |
596 | const u8 *assocresp_ies; | |
597 | const u8 *probe_resp; | |
598 | ||
599 | size_t head_len, tail_len; | |
600 | size_t beacon_ies_len; | |
601 | size_t proberesp_ies_len; | |
602 | size_t assocresp_ies_len; | |
603 | size_t probe_resp_len; | |
604 | }; | |
605 | ||
6d45a74b VT |
606 | struct mac_address { |
607 | u8 addr[ETH_ALEN]; | |
608 | }; | |
609 | ||
77765eaf VT |
610 | /** |
611 | * struct cfg80211_acl_data - Access control list data | |
612 | * | |
613 | * @acl_policy: ACL policy to be applied on the station's | |
077f897a | 614 | * entry specified by mac_addr |
77765eaf VT |
615 | * @n_acl_entries: Number of MAC address entries passed |
616 | * @mac_addrs: List of MAC addresses of stations to be used for ACL | |
617 | */ | |
618 | struct cfg80211_acl_data { | |
619 | enum nl80211_acl_policy acl_policy; | |
620 | int n_acl_entries; | |
621 | ||
622 | /* Keep it last */ | |
623 | struct mac_address mac_addrs[]; | |
624 | }; | |
625 | ||
8860020e JB |
626 | /** |
627 | * struct cfg80211_ap_settings - AP configuration | |
628 | * | |
629 | * Used to configure an AP interface. | |
630 | * | |
683b6d3b | 631 | * @chandef: defines the channel to use |
8860020e JB |
632 | * @beacon: beacon data |
633 | * @beacon_interval: beacon interval | |
634 | * @dtim_period: DTIM period | |
635 | * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from | |
636 | * user space) | |
637 | * @ssid_len: length of @ssid | |
638 | * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames | |
639 | * @crypto: crypto settings | |
640 | * @privacy: the BSS uses privacy | |
641 | * @auth_type: Authentication type (algorithm) | |
1b658f11 | 642 | * @inactivity_timeout: time in seconds to determine station's inactivity. |
53cabad7 JB |
643 | * @p2p_ctwindow: P2P CT Window |
644 | * @p2p_opp_ps: P2P opportunistic PS | |
77765eaf VT |
645 | * @acl: ACL configuration used by the drivers which has support for |
646 | * MAC address based access control | |
04f39047 | 647 | * @radar_required: set if radar detection is required |
8860020e JB |
648 | */ |
649 | struct cfg80211_ap_settings { | |
683b6d3b | 650 | struct cfg80211_chan_def chandef; |
aa430da4 | 651 | |
8860020e JB |
652 | struct cfg80211_beacon_data beacon; |
653 | ||
654 | int beacon_interval, dtim_period; | |
32e9de84 JM |
655 | const u8 *ssid; |
656 | size_t ssid_len; | |
657 | enum nl80211_hidden_ssid hidden_ssid; | |
5fb628e9 JM |
658 | struct cfg80211_crypto_settings crypto; |
659 | bool privacy; | |
660 | enum nl80211_auth_type auth_type; | |
1b658f11 | 661 | int inactivity_timeout; |
53cabad7 JB |
662 | u8 p2p_ctwindow; |
663 | bool p2p_opp_ps; | |
77765eaf | 664 | const struct cfg80211_acl_data *acl; |
04f39047 | 665 | bool radar_required; |
ed1b6cc7 JB |
666 | }; |
667 | ||
16ef1fe2 SW |
668 | /** |
669 | * struct cfg80211_csa_settings - channel switch settings | |
670 | * | |
671 | * Used for channel switch | |
672 | * | |
673 | * @chandef: defines the channel to use after the switch | |
674 | * @beacon_csa: beacon data while performing the switch | |
675 | * @counter_offset_beacon: offset for the counter within the beacon (tail) | |
676 | * @counter_offset_presp: offset for the counter within the probe response | |
677 | * @beacon_after: beacon data to be used on the new channel | |
678 | * @radar_required: whether radar detection is required on the new channel | |
679 | * @block_tx: whether transmissions should be blocked while changing | |
680 | * @count: number of beacons until switch | |
681 | */ | |
682 | struct cfg80211_csa_settings { | |
683 | struct cfg80211_chan_def chandef; | |
684 | struct cfg80211_beacon_data beacon_csa; | |
685 | u16 counter_offset_beacon, counter_offset_presp; | |
686 | struct cfg80211_beacon_data beacon_after; | |
687 | bool radar_required; | |
688 | bool block_tx; | |
689 | u8 count; | |
690 | }; | |
691 | ||
3b9ce80c JB |
692 | /** |
693 | * enum station_parameters_apply_mask - station parameter values to apply | |
694 | * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) | |
9d62a986 | 695 | * @STATION_PARAM_APPLY_CAPABILITY: apply new capability |
f8bacc21 | 696 | * @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state |
3b9ce80c JB |
697 | * |
698 | * Not all station parameters have in-band "no change" signalling, | |
699 | * for those that don't these flags will are used. | |
700 | */ | |
701 | enum station_parameters_apply_mask { | |
702 | STATION_PARAM_APPLY_UAPSD = BIT(0), | |
9d62a986 | 703 | STATION_PARAM_APPLY_CAPABILITY = BIT(1), |
f8bacc21 | 704 | STATION_PARAM_APPLY_PLINK_STATE = BIT(2), |
3b9ce80c JB |
705 | }; |
706 | ||
5727ef1b JB |
707 | /** |
708 | * struct station_parameters - station parameters | |
709 | * | |
710 | * Used to change and create a new station. | |
711 | * | |
712 | * @vlan: vlan interface station should belong to | |
713 | * @supported_rates: supported rates in IEEE 802.11 format | |
714 | * (or NULL for no change) | |
715 | * @supported_rates_len: number of supported rates | |
eccb8e8f JB |
716 | * @sta_flags_mask: station flags that changed |
717 | * (bitmask of BIT(NL80211_STA_FLAG_...)) | |
718 | * @sta_flags_set: station flags values | |
719 | * (bitmask of BIT(NL80211_STA_FLAG_...)) | |
5727ef1b JB |
720 | * @listen_interval: listen interval or -1 for no change |
721 | * @aid: AID or zero for no change | |
abe37c4b | 722 | * @plink_action: plink action to take |
9c3990aa | 723 | * @plink_state: set the peer link state for a station |
abe37c4b | 724 | * @ht_capa: HT capabilities of station |
f461be3e | 725 | * @vht_capa: VHT capabilities of station |
910868db EP |
726 | * @uapsd_queues: bitmap of queues configured for uapsd. same format |
727 | * as the AC bitmap in the QoS info field | |
728 | * @max_sp: max Service Period. same format as the MAX_SP in the | |
729 | * QoS info field (but already shifted down) | |
c26887d2 JB |
730 | * @sta_modify_mask: bitmap indicating which parameters changed |
731 | * (for those that don't have a natural "no change" value), | |
732 | * see &enum station_parameters_apply_mask | |
3b1c5a53 MP |
733 | * @local_pm: local link-specific mesh power save mode (no change when set |
734 | * to unknown) | |
9d62a986 JM |
735 | * @capability: station capability |
736 | * @ext_capab: extended capabilities of the station | |
737 | * @ext_capab_len: number of extended capabilities | |
5727ef1b JB |
738 | */ |
739 | struct station_parameters { | |
2c1aabf3 | 740 | const u8 *supported_rates; |
5727ef1b | 741 | struct net_device *vlan; |
eccb8e8f | 742 | u32 sta_flags_mask, sta_flags_set; |
3b9ce80c | 743 | u32 sta_modify_mask; |
5727ef1b JB |
744 | int listen_interval; |
745 | u16 aid; | |
746 | u8 supported_rates_len; | |
2ec600d6 | 747 | u8 plink_action; |
9c3990aa | 748 | u8 plink_state; |
2c1aabf3 JB |
749 | const struct ieee80211_ht_cap *ht_capa; |
750 | const struct ieee80211_vht_cap *vht_capa; | |
c75786c9 EP |
751 | u8 uapsd_queues; |
752 | u8 max_sp; | |
3b1c5a53 | 753 | enum nl80211_mesh_power_mode local_pm; |
9d62a986 | 754 | u16 capability; |
2c1aabf3 | 755 | const u8 *ext_capab; |
9d62a986 | 756 | u8 ext_capab_len; |
5727ef1b JB |
757 | }; |
758 | ||
77ee7c89 JB |
759 | /** |
760 | * enum cfg80211_station_type - the type of station being modified | |
761 | * @CFG80211_STA_AP_CLIENT: client of an AP interface | |
762 | * @CFG80211_STA_AP_MLME_CLIENT: client of an AP interface that has | |
763 | * the AP MLME in the device | |
764 | * @CFG80211_STA_AP_STA: AP station on managed interface | |
765 | * @CFG80211_STA_IBSS: IBSS station | |
766 | * @CFG80211_STA_TDLS_PEER_SETUP: TDLS peer on managed interface (dummy entry | |
767 | * while TDLS setup is in progress, it moves out of this state when | |
768 | * being marked authorized; use this only if TDLS with external setup is | |
769 | * supported/used) | |
770 | * @CFG80211_STA_TDLS_PEER_ACTIVE: TDLS peer on managed interface (active | |
771 | * entry that is operating, has been marked authorized by userspace) | |
eef941e6 TP |
772 | * @CFG80211_STA_MESH_PEER_KERNEL: peer on mesh interface (kernel managed) |
773 | * @CFG80211_STA_MESH_PEER_USER: peer on mesh interface (user managed) | |
77ee7c89 JB |
774 | */ |
775 | enum cfg80211_station_type { | |
776 | CFG80211_STA_AP_CLIENT, | |
777 | CFG80211_STA_AP_MLME_CLIENT, | |
778 | CFG80211_STA_AP_STA, | |
779 | CFG80211_STA_IBSS, | |
780 | CFG80211_STA_TDLS_PEER_SETUP, | |
781 | CFG80211_STA_TDLS_PEER_ACTIVE, | |
eef941e6 TP |
782 | CFG80211_STA_MESH_PEER_KERNEL, |
783 | CFG80211_STA_MESH_PEER_USER, | |
77ee7c89 JB |
784 | }; |
785 | ||
786 | /** | |
787 | * cfg80211_check_station_change - validate parameter changes | |
788 | * @wiphy: the wiphy this operates on | |
789 | * @params: the new parameters for a station | |
790 | * @statype: the type of station being modified | |
791 | * | |
792 | * Utility function for the @change_station driver method. Call this function | |
793 | * with the appropriate station type looking up the station (and checking that | |
794 | * it exists). It will verify whether the station change is acceptable, and if | |
795 | * not will return an error code. Note that it may modify the parameters for | |
796 | * backward compatibility reasons, so don't use them before calling this. | |
797 | */ | |
798 | int cfg80211_check_station_change(struct wiphy *wiphy, | |
799 | struct station_parameters *params, | |
800 | enum cfg80211_station_type statype); | |
801 | ||
fd5b74dc | 802 | /** |
2ec600d6 | 803 | * enum station_info_flags - station information flags |
fd5b74dc | 804 | * |
2ec600d6 LCC |
805 | * Used by the driver to indicate which info in &struct station_info |
806 | * it has filled in during get_station() or dump_station(). | |
fd5b74dc | 807 | * |
2ec600d6 LCC |
808 | * @STATION_INFO_INACTIVE_TIME: @inactive_time filled |
809 | * @STATION_INFO_RX_BYTES: @rx_bytes filled | |
810 | * @STATION_INFO_TX_BYTES: @tx_bytes filled | |
077f897a JB |
811 | * @STATION_INFO_RX_BYTES64: @rx_bytes filled with 64-bit value |
812 | * @STATION_INFO_TX_BYTES64: @tx_bytes filled with 64-bit value | |
2ec600d6 LCC |
813 | * @STATION_INFO_LLID: @llid filled |
814 | * @STATION_INFO_PLID: @plid filled | |
815 | * @STATION_INFO_PLINK_STATE: @plink_state filled | |
420e7fab | 816 | * @STATION_INFO_SIGNAL: @signal filled |
c8dcfd8a | 817 | * @STATION_INFO_TX_BITRATE: @txrate fields are filled |
ad24b0da | 818 | * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) |
42745e03 VK |
819 | * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value |
820 | * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value | |
b206b4ef BR |
821 | * @STATION_INFO_TX_RETRIES: @tx_retries filled |
822 | * @STATION_INFO_TX_FAILED: @tx_failed filled | |
5a5c731a | 823 | * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled |
541a45a1 | 824 | * @STATION_INFO_SIGNAL_AVG: @signal_avg filled |
c8dcfd8a | 825 | * @STATION_INFO_RX_BITRATE: @rxrate fields are filled |
f4263c98 | 826 | * @STATION_INFO_BSS_PARAM: @bss_param filled |
ebe27c91 | 827 | * @STATION_INFO_CONNECTED_TIME: @connected_time filled |
040bdf71 | 828 | * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled |
bb6e753e | 829 | * @STATION_INFO_STA_FLAGS: @sta_flags filled |
a85e1d55 | 830 | * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled |
d299a1f2 | 831 | * @STATION_INFO_T_OFFSET: @t_offset filled |
3b1c5a53 MP |
832 | * @STATION_INFO_LOCAL_PM: @local_pm filled |
833 | * @STATION_INFO_PEER_PM: @peer_pm filled | |
834 | * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled | |
119363c7 FF |
835 | * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled |
836 | * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled | |
fd5b74dc | 837 | */ |
2ec600d6 LCC |
838 | enum station_info_flags { |
839 | STATION_INFO_INACTIVE_TIME = 1<<0, | |
840 | STATION_INFO_RX_BYTES = 1<<1, | |
841 | STATION_INFO_TX_BYTES = 1<<2, | |
842 | STATION_INFO_LLID = 1<<3, | |
843 | STATION_INFO_PLID = 1<<4, | |
844 | STATION_INFO_PLINK_STATE = 1<<5, | |
420e7fab HR |
845 | STATION_INFO_SIGNAL = 1<<6, |
846 | STATION_INFO_TX_BITRATE = 1<<7, | |
98c8a60a JM |
847 | STATION_INFO_RX_PACKETS = 1<<8, |
848 | STATION_INFO_TX_PACKETS = 1<<9, | |
b206b4ef BR |
849 | STATION_INFO_TX_RETRIES = 1<<10, |
850 | STATION_INFO_TX_FAILED = 1<<11, | |
5a5c731a | 851 | STATION_INFO_RX_DROP_MISC = 1<<12, |
541a45a1 | 852 | STATION_INFO_SIGNAL_AVG = 1<<13, |
c8dcfd8a | 853 | STATION_INFO_RX_BITRATE = 1<<14, |
f4263c98 | 854 | STATION_INFO_BSS_PARAM = 1<<15, |
040bdf71 | 855 | STATION_INFO_CONNECTED_TIME = 1<<16, |
bb6e753e | 856 | STATION_INFO_ASSOC_REQ_IES = 1<<17, |
a85e1d55 | 857 | STATION_INFO_STA_FLAGS = 1<<18, |
d299a1f2 JC |
858 | STATION_INFO_BEACON_LOSS_COUNT = 1<<19, |
859 | STATION_INFO_T_OFFSET = 1<<20, | |
3b1c5a53 MP |
860 | STATION_INFO_LOCAL_PM = 1<<21, |
861 | STATION_INFO_PEER_PM = 1<<22, | |
862 | STATION_INFO_NONPEER_PM = 1<<23, | |
42745e03 VK |
863 | STATION_INFO_RX_BYTES64 = 1<<24, |
864 | STATION_INFO_TX_BYTES64 = 1<<25, | |
119363c7 FF |
865 | STATION_INFO_CHAIN_SIGNAL = 1<<26, |
866 | STATION_INFO_CHAIN_SIGNAL_AVG = 1<<27, | |
420e7fab HR |
867 | }; |
868 | ||
869 | /** | |
870 | * enum station_info_rate_flags - bitrate info flags | |
871 | * | |
872 | * Used by the driver to indicate the specific rate transmission | |
873 | * type for 802.11n transmissions. | |
874 | * | |
db9c64cf JB |
875 | * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS |
876 | * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS | |
877 | * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 MHz width transmission | |
878 | * @RATE_INFO_FLAGS_80_MHZ_WIDTH: 80 MHz width transmission | |
879 | * @RATE_INFO_FLAGS_80P80_MHZ_WIDTH: 80+80 MHz width transmission | |
880 | * @RATE_INFO_FLAGS_160_MHZ_WIDTH: 160 MHz width transmission | |
420e7fab | 881 | * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval |
db9c64cf | 882 | * @RATE_INFO_FLAGS_60G: 60GHz MCS |
420e7fab HR |
883 | */ |
884 | enum rate_info_flags { | |
db9c64cf JB |
885 | RATE_INFO_FLAGS_MCS = BIT(0), |
886 | RATE_INFO_FLAGS_VHT_MCS = BIT(1), | |
887 | RATE_INFO_FLAGS_40_MHZ_WIDTH = BIT(2), | |
888 | RATE_INFO_FLAGS_80_MHZ_WIDTH = BIT(3), | |
889 | RATE_INFO_FLAGS_80P80_MHZ_WIDTH = BIT(4), | |
890 | RATE_INFO_FLAGS_160_MHZ_WIDTH = BIT(5), | |
891 | RATE_INFO_FLAGS_SHORT_GI = BIT(6), | |
892 | RATE_INFO_FLAGS_60G = BIT(7), | |
420e7fab HR |
893 | }; |
894 | ||
895 | /** | |
896 | * struct rate_info - bitrate information | |
897 | * | |
898 | * Information about a receiving or transmitting bitrate | |
899 | * | |
900 | * @flags: bitflag of flags from &enum rate_info_flags | |
901 | * @mcs: mcs index if struct describes a 802.11n bitrate | |
902 | * @legacy: bitrate in 100kbit/s for 802.11abg | |
db9c64cf | 903 | * @nss: number of streams (VHT only) |
420e7fab HR |
904 | */ |
905 | struct rate_info { | |
906 | u8 flags; | |
907 | u8 mcs; | |
908 | u16 legacy; | |
db9c64cf | 909 | u8 nss; |
fd5b74dc JB |
910 | }; |
911 | ||
f4263c98 PS |
912 | /** |
913 | * enum station_info_rate_flags - bitrate info flags | |
914 | * | |
915 | * Used by the driver to indicate the specific rate transmission | |
916 | * type for 802.11n transmissions. | |
917 | * | |
918 | * @BSS_PARAM_FLAGS_CTS_PROT: whether CTS protection is enabled | |
919 | * @BSS_PARAM_FLAGS_SHORT_PREAMBLE: whether short preamble is enabled | |
920 | * @BSS_PARAM_FLAGS_SHORT_SLOT_TIME: whether short slot time is enabled | |
921 | */ | |
922 | enum bss_param_flags { | |
923 | BSS_PARAM_FLAGS_CTS_PROT = 1<<0, | |
924 | BSS_PARAM_FLAGS_SHORT_PREAMBLE = 1<<1, | |
925 | BSS_PARAM_FLAGS_SHORT_SLOT_TIME = 1<<2, | |
926 | }; | |
927 | ||
928 | /** | |
929 | * struct sta_bss_parameters - BSS parameters for the attached station | |
930 | * | |
931 | * Information about the currently associated BSS | |
932 | * | |
933 | * @flags: bitflag of flags from &enum bss_param_flags | |
934 | * @dtim_period: DTIM period for the BSS | |
935 | * @beacon_interval: beacon interval | |
936 | */ | |
937 | struct sta_bss_parameters { | |
938 | u8 flags; | |
939 | u8 dtim_period; | |
940 | u16 beacon_interval; | |
941 | }; | |
942 | ||
119363c7 FF |
943 | #define IEEE80211_MAX_CHAINS 4 |
944 | ||
fd5b74dc | 945 | /** |
2ec600d6 | 946 | * struct station_info - station information |
fd5b74dc | 947 | * |
2ec600d6 | 948 | * Station information filled by driver for get_station() and dump_station. |
fd5b74dc | 949 | * |
2ec600d6 | 950 | * @filled: bitflag of flags from &enum station_info_flags |
ebe27c91 | 951 | * @connected_time: time(in secs) since a station is last connected |
fd5b74dc JB |
952 | * @inactive_time: time since last station activity (tx/rx) in milliseconds |
953 | * @rx_bytes: bytes received from this station | |
954 | * @tx_bytes: bytes transmitted to this station | |
2ec600d6 LCC |
955 | * @llid: mesh local link id |
956 | * @plid: mesh peer link id | |
957 | * @plink_state: mesh peer link state | |
73c3df3b JB |
958 | * @signal: The signal strength, type depends on the wiphy's signal_type. |
959 | * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. | |
960 | * @signal_avg: Average signal strength, type depends on the wiphy's signal_type. | |
961 | * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. | |
119363c7 FF |
962 | * @chains: bitmask for filled values in @chain_signal, @chain_signal_avg |
963 | * @chain_signal: per-chain signal strength of last received packet in dBm | |
964 | * @chain_signal_avg: per-chain signal strength average in dBm | |
858022aa RD |
965 | * @txrate: current unicast bitrate from this station |
966 | * @rxrate: current unicast bitrate to this station | |
98c8a60a JM |
967 | * @rx_packets: packets received from this station |
968 | * @tx_packets: packets transmitted to this station | |
b206b4ef BR |
969 | * @tx_retries: cumulative retry counts |
970 | * @tx_failed: number of failed transmissions (retries exceeded, no ACK) | |
5a5c731a | 971 | * @rx_dropped_misc: Dropped for un-specified reason. |
1ba01458 | 972 | * @bss_param: current BSS parameters |
f5ea9120 JB |
973 | * @generation: generation number for nl80211 dumps. |
974 | * This number should increase every time the list of stations | |
975 | * changes, i.e. when a station is added or removed, so that | |
976 | * userspace can tell whether it got a consistent snapshot. | |
50d3dfb7 JM |
977 | * @assoc_req_ies: IEs from (Re)Association Request. |
978 | * This is used only when in AP mode with drivers that do not use | |
979 | * user space MLME/SME implementation. The information is provided for | |
980 | * the cfg80211_new_sta() calls to notify user space of the IEs. | |
981 | * @assoc_req_ies_len: Length of assoc_req_ies buffer in octets. | |
c26887d2 | 982 | * @sta_flags: station flags mask & values |
a85e1d55 | 983 | * @beacon_loss_count: Number of times beacon loss event has triggered. |
d299a1f2 | 984 | * @t_offset: Time offset of the station relative to this host. |
3b1c5a53 MP |
985 | * @local_pm: local mesh STA power save mode |
986 | * @peer_pm: peer mesh STA power save mode | |
987 | * @nonpeer_pm: non-peer mesh STA power save mode | |
fd5b74dc | 988 | */ |
2ec600d6 | 989 | struct station_info { |
fd5b74dc | 990 | u32 filled; |
ebe27c91 | 991 | u32 connected_time; |
fd5b74dc | 992 | u32 inactive_time; |
42745e03 VK |
993 | u64 rx_bytes; |
994 | u64 tx_bytes; | |
2ec600d6 LCC |
995 | u16 llid; |
996 | u16 plid; | |
997 | u8 plink_state; | |
420e7fab | 998 | s8 signal; |
541a45a1 | 999 | s8 signal_avg; |
119363c7 FF |
1000 | |
1001 | u8 chains; | |
1002 | s8 chain_signal[IEEE80211_MAX_CHAINS]; | |
1003 | s8 chain_signal_avg[IEEE80211_MAX_CHAINS]; | |
1004 | ||
420e7fab | 1005 | struct rate_info txrate; |
c8dcfd8a | 1006 | struct rate_info rxrate; |
98c8a60a JM |
1007 | u32 rx_packets; |
1008 | u32 tx_packets; | |
b206b4ef BR |
1009 | u32 tx_retries; |
1010 | u32 tx_failed; | |
5a5c731a | 1011 | u32 rx_dropped_misc; |
f4263c98 | 1012 | struct sta_bss_parameters bss_param; |
bb6e753e | 1013 | struct nl80211_sta_flag_update sta_flags; |
f5ea9120 JB |
1014 | |
1015 | int generation; | |
50d3dfb7 JM |
1016 | |
1017 | const u8 *assoc_req_ies; | |
1018 | size_t assoc_req_ies_len; | |
f612cedf | 1019 | |
a85e1d55 | 1020 | u32 beacon_loss_count; |
d299a1f2 | 1021 | s64 t_offset; |
3b1c5a53 MP |
1022 | enum nl80211_mesh_power_mode local_pm; |
1023 | enum nl80211_mesh_power_mode peer_pm; | |
1024 | enum nl80211_mesh_power_mode nonpeer_pm; | |
a85e1d55 | 1025 | |
f612cedf JM |
1026 | /* |
1027 | * Note: Add a new enum station_info_flags value for each new field and | |
1028 | * use it to check which fields are initialized. | |
1029 | */ | |
fd5b74dc JB |
1030 | }; |
1031 | ||
66f7ac50 MW |
1032 | /** |
1033 | * enum monitor_flags - monitor flags | |
1034 | * | |
1035 | * Monitor interface configuration flags. Note that these must be the bits | |
1036 | * according to the nl80211 flags. | |
1037 | * | |
1038 | * @MONITOR_FLAG_FCSFAIL: pass frames with bad FCS | |
1039 | * @MONITOR_FLAG_PLCPFAIL: pass frames with bad PLCP | |
1040 | * @MONITOR_FLAG_CONTROL: pass control frames | |
1041 | * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering | |
1042 | * @MONITOR_FLAG_COOK_FRAMES: report frames after processing | |
e057d3c3 | 1043 | * @MONITOR_FLAG_ACTIVE: active monitor, ACKs frames on its MAC address |
66f7ac50 MW |
1044 | */ |
1045 | enum monitor_flags { | |
1046 | MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL, | |
1047 | MONITOR_FLAG_PLCPFAIL = 1<<NL80211_MNTR_FLAG_PLCPFAIL, | |
1048 | MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL, | |
1049 | MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS, | |
1050 | MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES, | |
e057d3c3 | 1051 | MONITOR_FLAG_ACTIVE = 1<<NL80211_MNTR_FLAG_ACTIVE, |
66f7ac50 MW |
1052 | }; |
1053 | ||
2ec600d6 LCC |
1054 | /** |
1055 | * enum mpath_info_flags - mesh path information flags | |
1056 | * | |
1057 | * Used by the driver to indicate which info in &struct mpath_info it has filled | |
1058 | * in during get_station() or dump_station(). | |
1059 | * | |
abe37c4b JB |
1060 | * @MPATH_INFO_FRAME_QLEN: @frame_qlen filled |
1061 | * @MPATH_INFO_SN: @sn filled | |
1062 | * @MPATH_INFO_METRIC: @metric filled | |
1063 | * @MPATH_INFO_EXPTIME: @exptime filled | |
1064 | * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled | |
1065 | * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled | |
1066 | * @MPATH_INFO_FLAGS: @flags filled | |
2ec600d6 LCC |
1067 | */ |
1068 | enum mpath_info_flags { | |
1069 | MPATH_INFO_FRAME_QLEN = BIT(0), | |
d19b3bf6 | 1070 | MPATH_INFO_SN = BIT(1), |
2ec600d6 LCC |
1071 | MPATH_INFO_METRIC = BIT(2), |
1072 | MPATH_INFO_EXPTIME = BIT(3), | |
1073 | MPATH_INFO_DISCOVERY_TIMEOUT = BIT(4), | |
1074 | MPATH_INFO_DISCOVERY_RETRIES = BIT(5), | |
1075 | MPATH_INFO_FLAGS = BIT(6), | |
1076 | }; | |
1077 | ||
1078 | /** | |
1079 | * struct mpath_info - mesh path information | |
1080 | * | |
1081 | * Mesh path information filled by driver for get_mpath() and dump_mpath(). | |
1082 | * | |
1083 | * @filled: bitfield of flags from &enum mpath_info_flags | |
1084 | * @frame_qlen: number of queued frames for this destination | |
d19b3bf6 | 1085 | * @sn: target sequence number |
2ec600d6 LCC |
1086 | * @metric: metric (cost) of this mesh path |
1087 | * @exptime: expiration time for the mesh path from now, in msecs | |
1088 | * @flags: mesh path flags | |
1089 | * @discovery_timeout: total mesh path discovery timeout, in msecs | |
1090 | * @discovery_retries: mesh path discovery retries | |
f5ea9120 JB |
1091 | * @generation: generation number for nl80211 dumps. |
1092 | * This number should increase every time the list of mesh paths | |
1093 | * changes, i.e. when a station is added or removed, so that | |
1094 | * userspace can tell whether it got a consistent snapshot. | |
2ec600d6 LCC |
1095 | */ |
1096 | struct mpath_info { | |
1097 | u32 filled; | |
1098 | u32 frame_qlen; | |
d19b3bf6 | 1099 | u32 sn; |
2ec600d6 LCC |
1100 | u32 metric; |
1101 | u32 exptime; | |
1102 | u32 discovery_timeout; | |
1103 | u8 discovery_retries; | |
1104 | u8 flags; | |
f5ea9120 JB |
1105 | |
1106 | int generation; | |
2ec600d6 LCC |
1107 | }; |
1108 | ||
9f1ba906 JM |
1109 | /** |
1110 | * struct bss_parameters - BSS parameters | |
1111 | * | |
1112 | * Used to change BSS parameters (mainly for AP mode). | |
1113 | * | |
1114 | * @use_cts_prot: Whether to use CTS protection | |
1115 | * (0 = no, 1 = yes, -1 = do not change) | |
1116 | * @use_short_preamble: Whether the use of short preambles is allowed | |
1117 | * (0 = no, 1 = yes, -1 = do not change) | |
1118 | * @use_short_slot_time: Whether the use of short slot time is allowed | |
1119 | * (0 = no, 1 = yes, -1 = do not change) | |
90c97a04 JM |
1120 | * @basic_rates: basic rates in IEEE 802.11 format |
1121 | * (or NULL for no change) | |
1122 | * @basic_rates_len: number of basic rates | |
fd8aaaf3 | 1123 | * @ap_isolate: do not forward packets between connected stations |
50b12f59 HS |
1124 | * @ht_opmode: HT Operation mode |
1125 | * (u16 = opmode, -1 = do not change) | |
53cabad7 JB |
1126 | * @p2p_ctwindow: P2P CT Window (-1 = no change) |
1127 | * @p2p_opp_ps: P2P opportunistic PS (-1 = no change) | |
9f1ba906 JM |
1128 | */ |
1129 | struct bss_parameters { | |
1130 | int use_cts_prot; | |
1131 | int use_short_preamble; | |
1132 | int use_short_slot_time; | |
90c97a04 JM |
1133 | u8 *basic_rates; |
1134 | u8 basic_rates_len; | |
fd8aaaf3 | 1135 | int ap_isolate; |
50b12f59 | 1136 | int ht_opmode; |
53cabad7 | 1137 | s8 p2p_ctwindow, p2p_opp_ps; |
9f1ba906 | 1138 | }; |
2ec600d6 | 1139 | |
3ddd53f3 | 1140 | /** |
29cbe68c JB |
1141 | * struct mesh_config - 802.11s mesh configuration |
1142 | * | |
1143 | * These parameters can be changed while the mesh is active. | |
3ddd53f3 CYY |
1144 | * |
1145 | * @dot11MeshRetryTimeout: the initial retry timeout in millisecond units used | |
1146 | * by the Mesh Peering Open message | |
1147 | * @dot11MeshConfirmTimeout: the initial retry timeout in millisecond units | |
1148 | * used by the Mesh Peering Open message | |
1149 | * @dot11MeshHoldingTimeout: the confirm timeout in millisecond units used by | |
1150 | * the mesh peering management to close a mesh peering | |
1151 | * @dot11MeshMaxPeerLinks: the maximum number of peer links allowed on this | |
1152 | * mesh interface | |
1153 | * @dot11MeshMaxRetries: the maximum number of peer link open retries that can | |
1154 | * be sent to establish a new peer link instance in a mesh | |
1155 | * @dot11MeshTTL: the value of TTL field set at a source mesh STA | |
1156 | * @element_ttl: the value of TTL field set at a mesh STA for path selection | |
1157 | * elements | |
1158 | * @auto_open_plinks: whether we should automatically open peer links when we | |
1159 | * detect compatible mesh peers | |
1160 | * @dot11MeshNbrOffsetMaxNeighbor: the maximum number of neighbors to | |
1161 | * synchronize to for 11s default synchronization method | |
1162 | * @dot11MeshHWMPmaxPREQretries: the number of action frames containing a PREQ | |
1163 | * that an originator mesh STA can send to a particular path target | |
1164 | * @path_refresh_time: how frequently to refresh mesh paths in milliseconds | |
1165 | * @min_discovery_timeout: the minimum length of time to wait until giving up on | |
1166 | * a path discovery in milliseconds | |
1167 | * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs | |
1168 | * receiving a PREQ shall consider the forwarding information from the | |
1169 | * root to be valid. (TU = time unit) | |
1170 | * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during | |
1171 | * which a mesh STA can send only one action frame containing a PREQ | |
1172 | * element | |
1173 | * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during | |
1174 | * which a mesh STA can send only one Action frame containing a PERR | |
1175 | * element | |
1176 | * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that | |
1177 | * it takes for an HWMP information element to propagate across the mesh | |
1178 | * @dot11MeshHWMPRootMode: the configuration of a mesh STA as root mesh STA | |
1179 | * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root | |
1180 | * announcements are transmitted | |
1181 | * @dot11MeshGateAnnouncementProtocol: whether to advertise that this mesh | |
1182 | * station has access to a broader network beyond the MBSS. (This is | |
1183 | * missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol set to true | |
1184 | * only means that the station will announce others it's a mesh gate, but | |
1185 | * not necessarily using the gate announcement protocol. Still keeping the | |
1186 | * same nomenclature to be in sync with the spec) | |
1187 | * @dot11MeshForwarding: whether the Mesh STA is forwarding or non-forwarding | |
1188 | * entity (default is TRUE - forwarding entity) | |
1189 | * @rssi_threshold: the threshold for average signal strength of candidate | |
1190 | * station to establish a peer link | |
1191 | * @ht_opmode: mesh HT protection mode | |
ac1073a6 CYY |
1192 | * |
1193 | * @dot11MeshHWMPactivePathToRootTimeout: The time (in TUs) for which mesh STAs | |
1194 | * receiving a proactive PREQ shall consider the forwarding information to | |
1195 | * the root mesh STA to be valid. | |
1196 | * | |
1197 | * @dot11MeshHWMProotInterval: The interval of time (in TUs) between proactive | |
1198 | * PREQs are transmitted. | |
728b19e5 CYY |
1199 | * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs) |
1200 | * during which a mesh STA can send only one Action frame containing | |
1201 | * a PREQ element for root path confirmation. | |
3b1c5a53 MP |
1202 | * @power_mode: The default mesh power save mode which will be the initial |
1203 | * setting for new peer links. | |
1204 | * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake | |
1205 | * after transmitting its beacon. | |
8e7c0538 CT |
1206 | * @plink_timeout: If no tx activity is seen from a STA we've established |
1207 | * peering with for longer than this time (in seconds), then remove it | |
1208 | * from the STA's list of peers. Default is 30 minutes. | |
29cbe68c | 1209 | */ |
93da9cc1 | 1210 | struct mesh_config { |
93da9cc1 | 1211 | u16 dot11MeshRetryTimeout; |
1212 | u16 dot11MeshConfirmTimeout; | |
1213 | u16 dot11MeshHoldingTimeout; | |
1214 | u16 dot11MeshMaxPeerLinks; | |
a4f606ea CYY |
1215 | u8 dot11MeshMaxRetries; |
1216 | u8 dot11MeshTTL; | |
1217 | u8 element_ttl; | |
93da9cc1 | 1218 | bool auto_open_plinks; |
d299a1f2 | 1219 | u32 dot11MeshNbrOffsetMaxNeighbor; |
a4f606ea | 1220 | u8 dot11MeshHWMPmaxPREQretries; |
93da9cc1 | 1221 | u32 path_refresh_time; |
1222 | u16 min_discovery_timeout; | |
1223 | u32 dot11MeshHWMPactivePathTimeout; | |
1224 | u16 dot11MeshHWMPpreqMinInterval; | |
dca7e943 | 1225 | u16 dot11MeshHWMPperrMinInterval; |
93da9cc1 | 1226 | u16 dot11MeshHWMPnetDiameterTraversalTime; |
a4f606ea | 1227 | u8 dot11MeshHWMPRootMode; |
0507e159 | 1228 | u16 dot11MeshHWMPRannInterval; |
a4f606ea | 1229 | bool dot11MeshGateAnnouncementProtocol; |
94f90656 | 1230 | bool dot11MeshForwarding; |
55335137 | 1231 | s32 rssi_threshold; |
70c33eaa | 1232 | u16 ht_opmode; |
ac1073a6 CYY |
1233 | u32 dot11MeshHWMPactivePathToRootTimeout; |
1234 | u16 dot11MeshHWMProotInterval; | |
728b19e5 | 1235 | u16 dot11MeshHWMPconfirmationInterval; |
3b1c5a53 MP |
1236 | enum nl80211_mesh_power_mode power_mode; |
1237 | u16 dot11MeshAwakeWindowDuration; | |
8e7c0538 | 1238 | u32 plink_timeout; |
93da9cc1 | 1239 | }; |
1240 | ||
29cbe68c JB |
1241 | /** |
1242 | * struct mesh_setup - 802.11s mesh setup configuration | |
683b6d3b | 1243 | * @chandef: defines the channel to use |
29cbe68c JB |
1244 | * @mesh_id: the mesh ID |
1245 | * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes | |
d299a1f2 | 1246 | * @sync_method: which synchronization method to use |
c80d545d JC |
1247 | * @path_sel_proto: which path selection protocol to use |
1248 | * @path_metric: which metric to use | |
6e16d90b | 1249 | * @auth_id: which authentication method this mesh is using |
581a8b0f JC |
1250 | * @ie: vendor information elements (optional) |
1251 | * @ie_len: length of vendor information elements | |
b130e5ce JC |
1252 | * @is_authenticated: this mesh requires authentication |
1253 | * @is_secure: this mesh uses security | |
bb2798d4 | 1254 | * @user_mpm: userspace handles all MPM functions |
9bdbf04d MP |
1255 | * @dtim_period: DTIM period to use |
1256 | * @beacon_interval: beacon interval to use | |
4bb62344 | 1257 | * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a] |
ffb3cf30 | 1258 | * @basic_rates: basic rates to use when creating the mesh |
29cbe68c JB |
1259 | * |
1260 | * These parameters are fixed when the mesh is created. | |
1261 | */ | |
1262 | struct mesh_setup { | |
683b6d3b | 1263 | struct cfg80211_chan_def chandef; |
29cbe68c JB |
1264 | const u8 *mesh_id; |
1265 | u8 mesh_id_len; | |
d299a1f2 JC |
1266 | u8 sync_method; |
1267 | u8 path_sel_proto; | |
1268 | u8 path_metric; | |
6e16d90b | 1269 | u8 auth_id; |
581a8b0f JC |
1270 | const u8 *ie; |
1271 | u8 ie_len; | |
b130e5ce | 1272 | bool is_authenticated; |
15d5dda6 | 1273 | bool is_secure; |
bb2798d4 | 1274 | bool user_mpm; |
9bdbf04d MP |
1275 | u8 dtim_period; |
1276 | u16 beacon_interval; | |
4bb62344 | 1277 | int mcast_rate[IEEE80211_NUM_BANDS]; |
ffb3cf30 | 1278 | u32 basic_rates; |
29cbe68c JB |
1279 | }; |
1280 | ||
31888487 JM |
1281 | /** |
1282 | * struct ieee80211_txq_params - TX queue parameters | |
a3304b0a | 1283 | * @ac: AC identifier |
31888487 JM |
1284 | * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled |
1285 | * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range | |
1286 | * 1..32767] | |
1287 | * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range | |
1288 | * 1..32767] | |
1289 | * @aifs: Arbitration interframe space [0..255] | |
1290 | */ | |
1291 | struct ieee80211_txq_params { | |
a3304b0a | 1292 | enum nl80211_ac ac; |
31888487 JM |
1293 | u16 txop; |
1294 | u16 cwmin; | |
1295 | u16 cwmax; | |
1296 | u8 aifs; | |
1297 | }; | |
1298 | ||
d70e9693 JB |
1299 | /** |
1300 | * DOC: Scanning and BSS list handling | |
1301 | * | |
1302 | * The scanning process itself is fairly simple, but cfg80211 offers quite | |
1303 | * a bit of helper functionality. To start a scan, the scan operation will | |
1304 | * be invoked with a scan definition. This scan definition contains the | |
1305 | * channels to scan, and the SSIDs to send probe requests for (including the | |
1306 | * wildcard, if desired). A passive scan is indicated by having no SSIDs to | |
1307 | * probe. Additionally, a scan request may contain extra information elements | |
1308 | * that should be added to the probe request. The IEs are guaranteed to be | |
1309 | * well-formed, and will not exceed the maximum length the driver advertised | |
1310 | * in the wiphy structure. | |
1311 | * | |
1312 | * When scanning finds a BSS, cfg80211 needs to be notified of that, because | |
1313 | * it is responsible for maintaining the BSS list; the driver should not | |
1314 | * maintain a list itself. For this notification, various functions exist. | |
1315 | * | |
1316 | * Since drivers do not maintain a BSS list, there are also a number of | |
1317 | * functions to search for a BSS and obtain information about it from the | |
1318 | * BSS structure cfg80211 maintains. The BSS list is also made available | |
1319 | * to userspace. | |
1320 | */ | |
72bdcf34 | 1321 | |
2a519311 JB |
1322 | /** |
1323 | * struct cfg80211_ssid - SSID description | |
1324 | * @ssid: the SSID | |
1325 | * @ssid_len: length of the ssid | |
1326 | */ | |
1327 | struct cfg80211_ssid { | |
1328 | u8 ssid[IEEE80211_MAX_SSID_LEN]; | |
1329 | u8 ssid_len; | |
1330 | }; | |
1331 | ||
1332 | /** | |
1333 | * struct cfg80211_scan_request - scan request description | |
1334 | * | |
1335 | * @ssids: SSIDs to scan for (active scan only) | |
1336 | * @n_ssids: number of SSIDs | |
1337 | * @channels: channels to scan on. | |
ca3dbc20 | 1338 | * @n_channels: total number of channels to scan |
dcd6eac1 | 1339 | * @scan_width: channel width for scanning |
70692ad2 JM |
1340 | * @ie: optional information element(s) to add into Probe Request or %NULL |
1341 | * @ie_len: length of ie in octets | |
ed473771 | 1342 | * @flags: bit field of flags controlling operation |
34850ab2 | 1343 | * @rates: bitmap of rates to advertise for each band |
2a519311 | 1344 | * @wiphy: the wiphy this was for |
15d6030b | 1345 | * @scan_start: time (in jiffies) when the scan started |
fd014284 | 1346 | * @wdev: the wireless device to scan for |
abe37c4b | 1347 | * @aborted: (internal) scan request was notified as aborted |
5fe231e8 | 1348 | * @notified: (internal) scan request was notified as done or aborted |
e9f935e3 | 1349 | * @no_cck: used to send probe requests at non CCK rate in 2GHz band |
2a519311 JB |
1350 | */ |
1351 | struct cfg80211_scan_request { | |
1352 | struct cfg80211_ssid *ssids; | |
1353 | int n_ssids; | |
2a519311 | 1354 | u32 n_channels; |
dcd6eac1 | 1355 | enum nl80211_bss_scan_width scan_width; |
de95a54b | 1356 | const u8 *ie; |
70692ad2 | 1357 | size_t ie_len; |
ed473771 | 1358 | u32 flags; |
2a519311 | 1359 | |
34850ab2 JB |
1360 | u32 rates[IEEE80211_NUM_BANDS]; |
1361 | ||
fd014284 JB |
1362 | struct wireless_dev *wdev; |
1363 | ||
2a519311 JB |
1364 | /* internal */ |
1365 | struct wiphy *wiphy; | |
15d6030b | 1366 | unsigned long scan_start; |
5fe231e8 | 1367 | bool aborted, notified; |
e9f935e3 | 1368 | bool no_cck; |
5ba63533 JB |
1369 | |
1370 | /* keep last */ | |
1371 | struct ieee80211_channel *channels[0]; | |
2a519311 JB |
1372 | }; |
1373 | ||
a1f1c21c LC |
1374 | /** |
1375 | * struct cfg80211_match_set - sets of attributes to match | |
1376 | * | |
1377 | * @ssid: SSID to be matched | |
1378 | */ | |
1379 | struct cfg80211_match_set { | |
1380 | struct cfg80211_ssid ssid; | |
1381 | }; | |
1382 | ||
807f8a8c LC |
1383 | /** |
1384 | * struct cfg80211_sched_scan_request - scheduled scan request description | |
1385 | * | |
1386 | * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans) | |
1387 | * @n_ssids: number of SSIDs | |
1388 | * @n_channels: total number of channels to scan | |
dcd6eac1 | 1389 | * @scan_width: channel width for scanning |
bbe6ad6d | 1390 | * @interval: interval between each scheduled scan cycle |
807f8a8c LC |
1391 | * @ie: optional information element(s) to add into Probe Request or %NULL |
1392 | * @ie_len: length of ie in octets | |
ed473771 | 1393 | * @flags: bit field of flags controlling operation |
a1f1c21c LC |
1394 | * @match_sets: sets of parameters to be matched for a scan result |
1395 | * entry to be considered valid and to be passed to the host | |
1396 | * (others are filtered out). | |
1397 | * If ommited, all results are passed. | |
1398 | * @n_match_sets: number of match sets | |
807f8a8c LC |
1399 | * @wiphy: the wiphy this was for |
1400 | * @dev: the interface | |
077f897a | 1401 | * @scan_start: start time of the scheduled scan |
807f8a8c | 1402 | * @channels: channels to scan |
88e920b4 | 1403 | * @rssi_thold: don't report scan results below this threshold (in s32 dBm) |
807f8a8c LC |
1404 | */ |
1405 | struct cfg80211_sched_scan_request { | |
1406 | struct cfg80211_ssid *ssids; | |
1407 | int n_ssids; | |
1408 | u32 n_channels; | |
dcd6eac1 | 1409 | enum nl80211_bss_scan_width scan_width; |
bbe6ad6d | 1410 | u32 interval; |
807f8a8c LC |
1411 | const u8 *ie; |
1412 | size_t ie_len; | |
ed473771 | 1413 | u32 flags; |
a1f1c21c LC |
1414 | struct cfg80211_match_set *match_sets; |
1415 | int n_match_sets; | |
88e920b4 | 1416 | s32 rssi_thold; |
807f8a8c LC |
1417 | |
1418 | /* internal */ | |
1419 | struct wiphy *wiphy; | |
1420 | struct net_device *dev; | |
15d6030b | 1421 | unsigned long scan_start; |
807f8a8c LC |
1422 | |
1423 | /* keep last */ | |
1424 | struct ieee80211_channel *channels[0]; | |
1425 | }; | |
1426 | ||
2a519311 JB |
1427 | /** |
1428 | * enum cfg80211_signal_type - signal type | |
1429 | * | |
1430 | * @CFG80211_SIGNAL_TYPE_NONE: no signal strength information available | |
1431 | * @CFG80211_SIGNAL_TYPE_MBM: signal strength in mBm (100*dBm) | |
1432 | * @CFG80211_SIGNAL_TYPE_UNSPEC: signal strength, increasing from 0 through 100 | |
1433 | */ | |
1434 | enum cfg80211_signal_type { | |
1435 | CFG80211_SIGNAL_TYPE_NONE, | |
1436 | CFG80211_SIGNAL_TYPE_MBM, | |
1437 | CFG80211_SIGNAL_TYPE_UNSPEC, | |
1438 | }; | |
1439 | ||
9caf0364 JB |
1440 | /** |
1441 | * struct cfg80211_bss_ie_data - BSS entry IE data | |
8cef2c9d | 1442 | * @tsf: TSF contained in the frame that carried these IEs |
9caf0364 JB |
1443 | * @rcu_head: internal use, for freeing |
1444 | * @len: length of the IEs | |
1445 | * @data: IE data | |
1446 | */ | |
1447 | struct cfg80211_bss_ies { | |
8cef2c9d | 1448 | u64 tsf; |
9caf0364 JB |
1449 | struct rcu_head rcu_head; |
1450 | int len; | |
1451 | u8 data[]; | |
1452 | }; | |
1453 | ||
2a519311 JB |
1454 | /** |
1455 | * struct cfg80211_bss - BSS description | |
1456 | * | |
1457 | * This structure describes a BSS (which may also be a mesh network) | |
1458 | * for use in scan results and similar. | |
1459 | * | |
abe37c4b | 1460 | * @channel: channel this BSS is on |
dcd6eac1 | 1461 | * @scan_width: width of the control channel |
2a519311 | 1462 | * @bssid: BSSID of the BSS |
2a519311 JB |
1463 | * @beacon_interval: the beacon interval as from the frame |
1464 | * @capability: the capability field in host byte order | |
83c7aa1a JB |
1465 | * @ies: the information elements (Note that there is no guarantee that these |
1466 | * are well-formed!); this is a pointer to either the beacon_ies or | |
1467 | * proberesp_ies depending on whether Probe Response frame has been | |
1468 | * received. It is always non-%NULL. | |
34a6eddb | 1469 | * @beacon_ies: the information elements from the last Beacon frame |
776b3580 JB |
1470 | * (implementation note: if @hidden_beacon_bss is set this struct doesn't |
1471 | * own the beacon_ies, but they're just pointers to the ones from the | |
1472 | * @hidden_beacon_bss struct) | |
34a6eddb | 1473 | * @proberesp_ies: the information elements from the last Probe Response frame |
776b3580 JB |
1474 | * @hidden_beacon_bss: in case this BSS struct represents a probe response from |
1475 | * a BSS that hides the SSID in its beacon, this points to the BSS struct | |
1476 | * that holds the beacon data. @beacon_ies is still valid, of course, and | |
1477 | * points to the same data as hidden_beacon_bss->beacon_ies in that case. | |
77965c97 | 1478 | * @signal: signal strength value (type depends on the wiphy's signal_type) |
2a519311 JB |
1479 | * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes |
1480 | */ | |
1481 | struct cfg80211_bss { | |
1482 | struct ieee80211_channel *channel; | |
dcd6eac1 | 1483 | enum nl80211_bss_scan_width scan_width; |
2a519311 | 1484 | |
9caf0364 JB |
1485 | const struct cfg80211_bss_ies __rcu *ies; |
1486 | const struct cfg80211_bss_ies __rcu *beacon_ies; | |
1487 | const struct cfg80211_bss_ies __rcu *proberesp_ies; | |
1488 | ||
776b3580 | 1489 | struct cfg80211_bss *hidden_beacon_bss; |
9caf0364 JB |
1490 | |
1491 | s32 signal; | |
1492 | ||
2a519311 JB |
1493 | u16 beacon_interval; |
1494 | u16 capability; | |
2a519311 | 1495 | |
9caf0364 | 1496 | u8 bssid[ETH_ALEN]; |
2a519311 | 1497 | |
1c06ef98 | 1498 | u8 priv[0] __aligned(sizeof(void *)); |
2a519311 JB |
1499 | }; |
1500 | ||
517357c6 JB |
1501 | /** |
1502 | * ieee80211_bss_get_ie - find IE with given ID | |
1503 | * @bss: the bss to search | |
1504 | * @ie: the IE ID | |
9caf0364 JB |
1505 | * |
1506 | * Note that the return value is an RCU-protected pointer, so | |
1507 | * rcu_read_lock() must be held when calling this function. | |
0ae997dc | 1508 | * Return: %NULL if not found. |
517357c6 JB |
1509 | */ |
1510 | const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); | |
1511 | ||
1512 | ||
636a5d36 JM |
1513 | /** |
1514 | * struct cfg80211_auth_request - Authentication request data | |
1515 | * | |
1516 | * This structure provides information needed to complete IEEE 802.11 | |
1517 | * authentication. | |
19957bb3 | 1518 | * |
959867fa JB |
1519 | * @bss: The BSS to authenticate with, the callee must obtain a reference |
1520 | * to it if it needs to keep it. | |
636a5d36 JM |
1521 | * @auth_type: Authentication type (algorithm) |
1522 | * @ie: Extra IEs to add to Authentication frame or %NULL | |
1523 | * @ie_len: Length of ie buffer in octets | |
fffd0934 JB |
1524 | * @key_len: length of WEP key for shared key authentication |
1525 | * @key_idx: index of WEP key for shared key authentication | |
1526 | * @key: WEP key for shared key authentication | |
e39e5b5e JM |
1527 | * @sae_data: Non-IE data to use with SAE or %NULL. This starts with |
1528 | * Authentication transaction sequence number field. | |
1529 | * @sae_data_len: Length of sae_data buffer in octets | |
636a5d36 JM |
1530 | */ |
1531 | struct cfg80211_auth_request { | |
19957bb3 | 1532 | struct cfg80211_bss *bss; |
636a5d36 JM |
1533 | const u8 *ie; |
1534 | size_t ie_len; | |
19957bb3 | 1535 | enum nl80211_auth_type auth_type; |
fffd0934 JB |
1536 | const u8 *key; |
1537 | u8 key_len, key_idx; | |
e39e5b5e JM |
1538 | const u8 *sae_data; |
1539 | size_t sae_data_len; | |
636a5d36 JM |
1540 | }; |
1541 | ||
7e7c8926 BG |
1542 | /** |
1543 | * enum cfg80211_assoc_req_flags - Over-ride default behaviour in association. | |
1544 | * | |
1545 | * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) | |
ee2aca34 | 1546 | * @ASSOC_REQ_DISABLE_VHT: Disable VHT |
7e7c8926 BG |
1547 | */ |
1548 | enum cfg80211_assoc_req_flags { | |
1549 | ASSOC_REQ_DISABLE_HT = BIT(0), | |
ee2aca34 | 1550 | ASSOC_REQ_DISABLE_VHT = BIT(1), |
7e7c8926 BG |
1551 | }; |
1552 | ||
636a5d36 JM |
1553 | /** |
1554 | * struct cfg80211_assoc_request - (Re)Association request data | |
1555 | * | |
1556 | * This structure provides information needed to complete IEEE 802.11 | |
1557 | * (re)association. | |
959867fa JB |
1558 | * @bss: The BSS to associate with. If the call is successful the driver is |
1559 | * given a reference that it must give back to cfg80211_send_rx_assoc() | |
1560 | * or to cfg80211_assoc_timeout(). To ensure proper refcounting, new | |
1561 | * association requests while already associating must be rejected. | |
636a5d36 JM |
1562 | * @ie: Extra IEs to add to (Re)Association Request frame or %NULL |
1563 | * @ie_len: Length of ie buffer in octets | |
dc6382ce | 1564 | * @use_mfp: Use management frame protection (IEEE 802.11w) in this association |
b23aa676 | 1565 | * @crypto: crypto settings |
3e5d7649 | 1566 | * @prev_bssid: previous BSSID, if not %NULL use reassociate frame |
7e7c8926 BG |
1567 | * @flags: See &enum cfg80211_assoc_req_flags |
1568 | * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask | |
ad24b0da | 1569 | * will be used in ht_capa. Un-supported values will be ignored. |
7e7c8926 | 1570 | * @ht_capa_mask: The bits of ht_capa which are to be used. |
ee2aca34 JB |
1571 | * @vht_capa: VHT capability override |
1572 | * @vht_capa_mask: VHT capability mask indicating which fields to use | |
636a5d36 JM |
1573 | */ |
1574 | struct cfg80211_assoc_request { | |
19957bb3 | 1575 | struct cfg80211_bss *bss; |
3e5d7649 | 1576 | const u8 *ie, *prev_bssid; |
636a5d36 | 1577 | size_t ie_len; |
b23aa676 | 1578 | struct cfg80211_crypto_settings crypto; |
19957bb3 | 1579 | bool use_mfp; |
7e7c8926 BG |
1580 | u32 flags; |
1581 | struct ieee80211_ht_cap ht_capa; | |
1582 | struct ieee80211_ht_cap ht_capa_mask; | |
ee2aca34 | 1583 | struct ieee80211_vht_cap vht_capa, vht_capa_mask; |
636a5d36 JM |
1584 | }; |
1585 | ||
1586 | /** | |
1587 | * struct cfg80211_deauth_request - Deauthentication request data | |
1588 | * | |
1589 | * This structure provides information needed to complete IEEE 802.11 | |
1590 | * deauthentication. | |
1591 | * | |
95de817b | 1592 | * @bssid: the BSSID of the BSS to deauthenticate from |
636a5d36 JM |
1593 | * @ie: Extra IEs to add to Deauthentication frame or %NULL |
1594 | * @ie_len: Length of ie buffer in octets | |
19957bb3 | 1595 | * @reason_code: The reason code for the deauthentication |
077f897a JB |
1596 | * @local_state_change: if set, change local state only and |
1597 | * do not set a deauth frame | |
636a5d36 JM |
1598 | */ |
1599 | struct cfg80211_deauth_request { | |
95de817b | 1600 | const u8 *bssid; |
636a5d36 JM |
1601 | const u8 *ie; |
1602 | size_t ie_len; | |
19957bb3 | 1603 | u16 reason_code; |
6863255b | 1604 | bool local_state_change; |
636a5d36 JM |
1605 | }; |
1606 | ||
1607 | /** | |
1608 | * struct cfg80211_disassoc_request - Disassociation request data | |
1609 | * | |
1610 | * This structure provides information needed to complete IEEE 802.11 | |
1611 | * disassocation. | |
1612 | * | |
19957bb3 | 1613 | * @bss: the BSS to disassociate from |
636a5d36 JM |
1614 | * @ie: Extra IEs to add to Disassociation frame or %NULL |
1615 | * @ie_len: Length of ie buffer in octets | |
19957bb3 | 1616 | * @reason_code: The reason code for the disassociation |
d5cdfacb JM |
1617 | * @local_state_change: This is a request for a local state only, i.e., no |
1618 | * Disassociation frame is to be transmitted. | |
636a5d36 JM |
1619 | */ |
1620 | struct cfg80211_disassoc_request { | |
19957bb3 | 1621 | struct cfg80211_bss *bss; |
636a5d36 JM |
1622 | const u8 *ie; |
1623 | size_t ie_len; | |
19957bb3 | 1624 | u16 reason_code; |
d5cdfacb | 1625 | bool local_state_change; |
636a5d36 JM |
1626 | }; |
1627 | ||
04a773ad JB |
1628 | /** |
1629 | * struct cfg80211_ibss_params - IBSS parameters | |
1630 | * | |
1631 | * This structure defines the IBSS parameters for the join_ibss() | |
1632 | * method. | |
1633 | * | |
1634 | * @ssid: The SSID, will always be non-null. | |
1635 | * @ssid_len: The length of the SSID, will always be non-zero. | |
1636 | * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not | |
1637 | * search for IBSSs with a different BSSID. | |
683b6d3b | 1638 | * @chandef: defines the channel to use if no other IBSS to join can be found |
04a773ad JB |
1639 | * @channel_fixed: The channel should be fixed -- do not search for |
1640 | * IBSSs to join on other channels. | |
1641 | * @ie: information element(s) to include in the beacon | |
1642 | * @ie_len: length of that | |
8e30bc55 | 1643 | * @beacon_interval: beacon interval to use |
fffd0934 JB |
1644 | * @privacy: this is a protected network, keys will be configured |
1645 | * after joining | |
267335d6 AQ |
1646 | * @control_port: whether user space controls IEEE 802.1X port, i.e., |
1647 | * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is | |
1648 | * required to assume that the port is unauthorized until authorized by | |
1649 | * user space. Otherwise, port is marked authorized by default. | |
fbd2c8dc | 1650 | * @basic_rates: bitmap of basic rates to use when creating the IBSS |
dd5b4cc7 | 1651 | * @mcast_rate: per-band multicast rate index + 1 (0: disabled) |
803768f5 | 1652 | * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask |
ad24b0da | 1653 | * will be used in ht_capa. Un-supported values will be ignored. |
803768f5 | 1654 | * @ht_capa_mask: The bits of ht_capa which are to be used. |
04a773ad JB |
1655 | */ |
1656 | struct cfg80211_ibss_params { | |
1657 | u8 *ssid; | |
1658 | u8 *bssid; | |
683b6d3b | 1659 | struct cfg80211_chan_def chandef; |
04a773ad JB |
1660 | u8 *ie; |
1661 | u8 ssid_len, ie_len; | |
8e30bc55 | 1662 | u16 beacon_interval; |
fbd2c8dc | 1663 | u32 basic_rates; |
04a773ad | 1664 | bool channel_fixed; |
fffd0934 | 1665 | bool privacy; |
267335d6 | 1666 | bool control_port; |
dd5b4cc7 | 1667 | int mcast_rate[IEEE80211_NUM_BANDS]; |
803768f5 SW |
1668 | struct ieee80211_ht_cap ht_capa; |
1669 | struct ieee80211_ht_cap ht_capa_mask; | |
04a773ad JB |
1670 | }; |
1671 | ||
b23aa676 SO |
1672 | /** |
1673 | * struct cfg80211_connect_params - Connection parameters | |
1674 | * | |
1675 | * This structure provides information needed to complete IEEE 802.11 | |
1676 | * authentication and association. | |
1677 | * | |
1678 | * @channel: The channel to use or %NULL if not specified (auto-select based | |
1679 | * on scan results) | |
1680 | * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan | |
1681 | * results) | |
1682 | * @ssid: SSID | |
1683 | * @ssid_len: Length of ssid in octets | |
1684 | * @auth_type: Authentication type (algorithm) | |
abe37c4b JB |
1685 | * @ie: IEs for association request |
1686 | * @ie_len: Length of assoc_ie in octets | |
b23aa676 | 1687 | * @privacy: indicates whether privacy-enabled APs should be used |
cee00a95 | 1688 | * @mfp: indicate whether management frame protection is used |
b23aa676 | 1689 | * @crypto: crypto settings |
fffd0934 JB |
1690 | * @key_len: length of WEP key for shared key authentication |
1691 | * @key_idx: index of WEP key for shared key authentication | |
1692 | * @key: WEP key for shared key authentication | |
7e7c8926 | 1693 | * @flags: See &enum cfg80211_assoc_req_flags |
4486ea98 | 1694 | * @bg_scan_period: Background scan period in seconds |
ad24b0da | 1695 | * or -1 to indicate that default value is to be used. |
7e7c8926 | 1696 | * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask |
ad24b0da | 1697 | * will be used in ht_capa. Un-supported values will be ignored. |
7e7c8926 | 1698 | * @ht_capa_mask: The bits of ht_capa which are to be used. |
ee2aca34 JB |
1699 | * @vht_capa: VHT Capability overrides |
1700 | * @vht_capa_mask: The bits of vht_capa which are to be used. | |
b23aa676 SO |
1701 | */ |
1702 | struct cfg80211_connect_params { | |
1703 | struct ieee80211_channel *channel; | |
1704 | u8 *bssid; | |
1705 | u8 *ssid; | |
1706 | size_t ssid_len; | |
1707 | enum nl80211_auth_type auth_type; | |
1708 | u8 *ie; | |
1709 | size_t ie_len; | |
1710 | bool privacy; | |
cee00a95 | 1711 | enum nl80211_mfp mfp; |
b23aa676 | 1712 | struct cfg80211_crypto_settings crypto; |
fffd0934 JB |
1713 | const u8 *key; |
1714 | u8 key_len, key_idx; | |
7e7c8926 | 1715 | u32 flags; |
4486ea98 | 1716 | int bg_scan_period; |
7e7c8926 BG |
1717 | struct ieee80211_ht_cap ht_capa; |
1718 | struct ieee80211_ht_cap ht_capa_mask; | |
ee2aca34 JB |
1719 | struct ieee80211_vht_cap vht_capa; |
1720 | struct ieee80211_vht_cap vht_capa_mask; | |
b23aa676 SO |
1721 | }; |
1722 | ||
b9a5f8ca JM |
1723 | /** |
1724 | * enum wiphy_params_flags - set_wiphy_params bitfield values | |
abe37c4b JB |
1725 | * @WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed |
1726 | * @WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed | |
1727 | * @WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed | |
1728 | * @WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed | |
1729 | * @WIPHY_PARAM_COVERAGE_CLASS: coverage class changed | |
b9a5f8ca JM |
1730 | */ |
1731 | enum wiphy_params_flags { | |
1732 | WIPHY_PARAM_RETRY_SHORT = 1 << 0, | |
1733 | WIPHY_PARAM_RETRY_LONG = 1 << 1, | |
1734 | WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2, | |
1735 | WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, | |
81077e82 | 1736 | WIPHY_PARAM_COVERAGE_CLASS = 1 << 4, |
b9a5f8ca JM |
1737 | }; |
1738 | ||
9930380f JB |
1739 | /* |
1740 | * cfg80211_bitrate_mask - masks for bitrate control | |
1741 | */ | |
1742 | struct cfg80211_bitrate_mask { | |
9930380f JB |
1743 | struct { |
1744 | u32 legacy; | |
24db78c0 | 1745 | u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; |
9930380f | 1746 | } control[IEEE80211_NUM_BANDS]; |
9930380f | 1747 | }; |
67fbb16b SO |
1748 | /** |
1749 | * struct cfg80211_pmksa - PMK Security Association | |
1750 | * | |
1751 | * This structure is passed to the set/del_pmksa() method for PMKSA | |
1752 | * caching. | |
1753 | * | |
1754 | * @bssid: The AP's BSSID. | |
1755 | * @pmkid: The PMK material itself. | |
1756 | */ | |
1757 | struct cfg80211_pmksa { | |
1758 | u8 *bssid; | |
1759 | u8 *pmkid; | |
1760 | }; | |
9930380f | 1761 | |
ff1b6e69 | 1762 | /** |
50ac6607 | 1763 | * struct cfg80211_pkt_pattern - packet pattern |
ff1b6e69 JB |
1764 | * @mask: bitmask where to match pattern and where to ignore bytes, |
1765 | * one bit per byte, in same format as nl80211 | |
1766 | * @pattern: bytes to match where bitmask is 1 | |
1767 | * @pattern_len: length of pattern (in bytes) | |
bb92d199 | 1768 | * @pkt_offset: packet offset (in bytes) |
ff1b6e69 JB |
1769 | * |
1770 | * Internal note: @mask and @pattern are allocated in one chunk of | |
1771 | * memory, free @mask only! | |
1772 | */ | |
50ac6607 | 1773 | struct cfg80211_pkt_pattern { |
ff1b6e69 JB |
1774 | u8 *mask, *pattern; |
1775 | int pattern_len; | |
bb92d199 | 1776 | int pkt_offset; |
ff1b6e69 JB |
1777 | }; |
1778 | ||
2a0e047e JB |
1779 | /** |
1780 | * struct cfg80211_wowlan_tcp - TCP connection parameters | |
1781 | * | |
1782 | * @sock: (internal) socket for source port allocation | |
1783 | * @src: source IP address | |
1784 | * @dst: destination IP address | |
1785 | * @dst_mac: destination MAC address | |
1786 | * @src_port: source port | |
1787 | * @dst_port: destination port | |
1788 | * @payload_len: data payload length | |
1789 | * @payload: data payload buffer | |
1790 | * @payload_seq: payload sequence stamping configuration | |
1791 | * @data_interval: interval at which to send data packets | |
1792 | * @wake_len: wakeup payload match length | |
1793 | * @wake_data: wakeup payload match data | |
1794 | * @wake_mask: wakeup payload match mask | |
1795 | * @tokens_size: length of the tokens buffer | |
1796 | * @payload_tok: payload token usage configuration | |
1797 | */ | |
1798 | struct cfg80211_wowlan_tcp { | |
1799 | struct socket *sock; | |
1800 | __be32 src, dst; | |
1801 | u16 src_port, dst_port; | |
1802 | u8 dst_mac[ETH_ALEN]; | |
1803 | int payload_len; | |
1804 | const u8 *payload; | |
1805 | struct nl80211_wowlan_tcp_data_seq payload_seq; | |
1806 | u32 data_interval; | |
1807 | u32 wake_len; | |
1808 | const u8 *wake_data, *wake_mask; | |
1809 | u32 tokens_size; | |
1810 | /* must be last, variable member */ | |
1811 | struct nl80211_wowlan_tcp_data_token payload_tok; | |
ff1b6e69 JB |
1812 | }; |
1813 | ||
1814 | /** | |
1815 | * struct cfg80211_wowlan - Wake on Wireless-LAN support info | |
1816 | * | |
1817 | * This structure defines the enabled WoWLAN triggers for the device. | |
1818 | * @any: wake up on any activity -- special trigger if device continues | |
1819 | * operating as normal during suspend | |
1820 | * @disconnect: wake up if getting disconnected | |
1821 | * @magic_pkt: wake up on receiving magic packet | |
1822 | * @patterns: wake up on receiving packet matching a pattern | |
1823 | * @n_patterns: number of patterns | |
77dbbb13 JB |
1824 | * @gtk_rekey_failure: wake up on GTK rekey failure |
1825 | * @eap_identity_req: wake up on EAP identity request packet | |
1826 | * @four_way_handshake: wake up on 4-way handshake | |
1827 | * @rfkill_release: wake up when rfkill is released | |
2a0e047e JB |
1828 | * @tcp: TCP connection establishment/wakeup parameters, see nl80211.h. |
1829 | * NULL if not configured. | |
ff1b6e69 JB |
1830 | */ |
1831 | struct cfg80211_wowlan { | |
77dbbb13 JB |
1832 | bool any, disconnect, magic_pkt, gtk_rekey_failure, |
1833 | eap_identity_req, four_way_handshake, | |
1834 | rfkill_release; | |
50ac6607 | 1835 | struct cfg80211_pkt_pattern *patterns; |
2a0e047e | 1836 | struct cfg80211_wowlan_tcp *tcp; |
ff1b6e69 JB |
1837 | int n_patterns; |
1838 | }; | |
1839 | ||
be29b99a AK |
1840 | /** |
1841 | * struct cfg80211_coalesce_rules - Coalesce rule parameters | |
1842 | * | |
1843 | * This structure defines coalesce rule for the device. | |
1844 | * @delay: maximum coalescing delay in msecs. | |
1845 | * @condition: condition for packet coalescence. | |
1846 | * see &enum nl80211_coalesce_condition. | |
1847 | * @patterns: array of packet patterns | |
1848 | * @n_patterns: number of patterns | |
1849 | */ | |
1850 | struct cfg80211_coalesce_rules { | |
1851 | int delay; | |
1852 | enum nl80211_coalesce_condition condition; | |
1853 | struct cfg80211_pkt_pattern *patterns; | |
1854 | int n_patterns; | |
1855 | }; | |
1856 | ||
1857 | /** | |
1858 | * struct cfg80211_coalesce - Packet coalescing settings | |
1859 | * | |
1860 | * This structure defines coalescing settings. | |
1861 | * @rules: array of coalesce rules | |
1862 | * @n_rules: number of rules | |
1863 | */ | |
1864 | struct cfg80211_coalesce { | |
1865 | struct cfg80211_coalesce_rules *rules; | |
1866 | int n_rules; | |
1867 | }; | |
1868 | ||
cd8f7cb4 JB |
1869 | /** |
1870 | * struct cfg80211_wowlan_wakeup - wakeup report | |
1871 | * @disconnect: woke up by getting disconnected | |
1872 | * @magic_pkt: woke up by receiving magic packet | |
1873 | * @gtk_rekey_failure: woke up by GTK rekey failure | |
1874 | * @eap_identity_req: woke up by EAP identity request packet | |
1875 | * @four_way_handshake: woke up by 4-way handshake | |
1876 | * @rfkill_release: woke up by rfkill being released | |
1877 | * @pattern_idx: pattern that caused wakeup, -1 if not due to pattern | |
1878 | * @packet_present_len: copied wakeup packet data | |
1879 | * @packet_len: original wakeup packet length | |
1880 | * @packet: The packet causing the wakeup, if any. | |
1881 | * @packet_80211: For pattern match, magic packet and other data | |
1882 | * frame triggers an 802.3 frame should be reported, for | |
1883 | * disconnect due to deauth 802.11 frame. This indicates which | |
1884 | * it is. | |
2a0e047e JB |
1885 | * @tcp_match: TCP wakeup packet received |
1886 | * @tcp_connlost: TCP connection lost or failed to establish | |
1887 | * @tcp_nomoretokens: TCP data ran out of tokens | |
cd8f7cb4 JB |
1888 | */ |
1889 | struct cfg80211_wowlan_wakeup { | |
1890 | bool disconnect, magic_pkt, gtk_rekey_failure, | |
1891 | eap_identity_req, four_way_handshake, | |
2a0e047e JB |
1892 | rfkill_release, packet_80211, |
1893 | tcp_match, tcp_connlost, tcp_nomoretokens; | |
cd8f7cb4 JB |
1894 | s32 pattern_idx; |
1895 | u32 packet_present_len, packet_len; | |
1896 | const void *packet; | |
1897 | }; | |
1898 | ||
e5497d76 JB |
1899 | /** |
1900 | * struct cfg80211_gtk_rekey_data - rekey data | |
1901 | * @kek: key encryption key | |
1902 | * @kck: key confirmation key | |
1903 | * @replay_ctr: replay counter | |
1904 | */ | |
1905 | struct cfg80211_gtk_rekey_data { | |
1906 | u8 kek[NL80211_KEK_LEN]; | |
1907 | u8 kck[NL80211_KCK_LEN]; | |
1908 | u8 replay_ctr[NL80211_REPLAY_CTR_LEN]; | |
1909 | }; | |
1910 | ||
355199e0 JM |
1911 | /** |
1912 | * struct cfg80211_update_ft_ies_params - FT IE Information | |
1913 | * | |
1914 | * This structure provides information needed to update the fast transition IE | |
1915 | * | |
1916 | * @md: The Mobility Domain ID, 2 Octet value | |
1917 | * @ie: Fast Transition IEs | |
1918 | * @ie_len: Length of ft_ie in octets | |
1919 | */ | |
1920 | struct cfg80211_update_ft_ies_params { | |
1921 | u16 md; | |
1922 | const u8 *ie; | |
1923 | size_t ie_len; | |
1924 | }; | |
1925 | ||
704232c2 JB |
1926 | /** |
1927 | * struct cfg80211_ops - backend description for wireless configuration | |
1928 | * | |
1929 | * This struct is registered by fullmac card drivers and/or wireless stacks | |
1930 | * in order to handle configuration requests on their interfaces. | |
1931 | * | |
1932 | * All callbacks except where otherwise noted should return 0 | |
1933 | * on success or a negative error code. | |
1934 | * | |
43fb45cb JB |
1935 | * All operations are currently invoked under rtnl for consistency with the |
1936 | * wireless extensions but this is subject to reevaluation as soon as this | |
1937 | * code is used more widely and we have a first user without wext. | |
1938 | * | |
ff1b6e69 JB |
1939 | * @suspend: wiphy device needs to be suspended. The variable @wow will |
1940 | * be %NULL or contain the enabled Wake-on-Wireless triggers that are | |
1941 | * configured for the device. | |
0378b3f1 | 1942 | * @resume: wiphy device needs to be resumed |
6d52563f JB |
1943 | * @set_wakeup: Called when WoWLAN is enabled/disabled, use this callback |
1944 | * to call device_set_wakeup_enable() to enable/disable wakeup from | |
1945 | * the device. | |
0378b3f1 | 1946 | * |
60719ffd | 1947 | * @add_virtual_intf: create a new virtual interface with the given name, |
463d0183 | 1948 | * must set the struct wireless_dev's iftype. Beware: You must create |
84efbb84 | 1949 | * the new netdev in the wiphy's network namespace! Returns the struct |
98104fde JB |
1950 | * wireless_dev, or an ERR_PTR. For P2P device wdevs, the driver must |
1951 | * also set the address member in the wdev. | |
704232c2 | 1952 | * |
84efbb84 | 1953 | * @del_virtual_intf: remove the virtual interface |
55682965 | 1954 | * |
60719ffd JB |
1955 | * @change_virtual_intf: change type/configuration of virtual interface, |
1956 | * keep the struct wireless_dev's iftype updated. | |
55682965 | 1957 | * |
41ade00f JB |
1958 | * @add_key: add a key with the given parameters. @mac_addr will be %NULL |
1959 | * when adding a group key. | |
1960 | * | |
1961 | * @get_key: get information about the key with the given parameters. | |
1962 | * @mac_addr will be %NULL when requesting information for a group | |
1963 | * key. All pointers given to the @callback function need not be valid | |
e3da574a JB |
1964 | * after it returns. This function should return an error if it is |
1965 | * not possible to retrieve the key, -ENOENT if it doesn't exist. | |
41ade00f JB |
1966 | * |
1967 | * @del_key: remove a key given the @mac_addr (%NULL for a group key) | |
e3da574a | 1968 | * and @key_index, return -ENOENT if the key doesn't exist. |
41ade00f JB |
1969 | * |
1970 | * @set_default_key: set the default key on an interface | |
ed1b6cc7 | 1971 | * |
3cfcf6ac JM |
1972 | * @set_default_mgmt_key: set the default management frame key on an interface |
1973 | * | |
e5497d76 JB |
1974 | * @set_rekey_data: give the data necessary for GTK rekeying to the driver |
1975 | * | |
c04a4ff7 JB |
1976 | * @start_ap: Start acting in AP mode defined by the parameters. |
1977 | * @change_beacon: Change the beacon parameters for an access point mode | |
1978 | * interface. This should reject the call when AP mode wasn't started. | |
1979 | * @stop_ap: Stop being an AP, including stopping beaconing. | |
5727ef1b JB |
1980 | * |
1981 | * @add_station: Add a new station. | |
5727ef1b | 1982 | * @del_station: Remove a station; @mac may be NULL to remove all stations. |
bdd90d5e JB |
1983 | * @change_station: Modify a given station. Note that flags changes are not much |
1984 | * validated in cfg80211, in particular the auth/assoc/authorized flags | |
1985 | * might come to the driver in invalid combinations -- make sure to check | |
77ee7c89 JB |
1986 | * them, also against the existing state! Drivers must call |
1987 | * cfg80211_check_station_change() to validate the information. | |
abe37c4b JB |
1988 | * @get_station: get station information for the station identified by @mac |
1989 | * @dump_station: dump station callback -- resume dump at index @idx | |
1990 | * | |
1991 | * @add_mpath: add a fixed mesh path | |
1992 | * @del_mpath: delete a given mesh path | |
1993 | * @change_mpath: change a given mesh path | |
1994 | * @get_mpath: get a mesh path for the given parameters | |
1995 | * @dump_mpath: dump mesh path callback -- resume dump at index @idx | |
f52555a4 | 1996 | * @join_mesh: join the mesh network with the specified parameters |
8d61ffa5 | 1997 | * (invoked with the wireless_dev mutex held) |
f52555a4 | 1998 | * @leave_mesh: leave the current mesh network |
8d61ffa5 | 1999 | * (invoked with the wireless_dev mutex held) |
2ec600d6 | 2000 | * |
24bdd9f4 | 2001 | * @get_mesh_config: Get the current mesh configuration |
93da9cc1 | 2002 | * |
24bdd9f4 | 2003 | * @update_mesh_config: Update mesh parameters on a running mesh. |
93da9cc1 | 2004 | * The mask is a bitfield which tells us which parameters to |
2005 | * set, and which to leave alone. | |
2006 | * | |
9f1ba906 | 2007 | * @change_bss: Modify parameters for a given BSS. |
31888487 JM |
2008 | * |
2009 | * @set_txq_params: Set TX queue parameters | |
72bdcf34 | 2010 | * |
e8c9bd5b JB |
2011 | * @libertas_set_mesh_channel: Only for backward compatibility for libertas, |
2012 | * as it doesn't implement join_mesh and needs to set the channel to | |
2013 | * join the mesh instead. | |
2014 | * | |
2015 | * @set_monitor_channel: Set the monitor mode channel for the device. If other | |
2016 | * interfaces are active this callback should reject the configuration. | |
2017 | * If no interfaces are active or the device is down, the channel should | |
2018 | * be stored for when a monitor interface becomes active. | |
9aed3cc1 | 2019 | * |
2a519311 JB |
2020 | * @scan: Request to do a scan. If returning zero, the scan request is given |
2021 | * the driver, and will be valid until passed to cfg80211_scan_done(). | |
2022 | * For scan results, call cfg80211_inform_bss(); you can call this outside | |
2023 | * the scan/scan_done bracket too. | |
636a5d36 JM |
2024 | * |
2025 | * @auth: Request to authenticate with the specified peer | |
8d61ffa5 | 2026 | * (invoked with the wireless_dev mutex held) |
636a5d36 | 2027 | * @assoc: Request to (re)associate with the specified peer |
8d61ffa5 | 2028 | * (invoked with the wireless_dev mutex held) |
636a5d36 | 2029 | * @deauth: Request to deauthenticate from the specified peer |
8d61ffa5 | 2030 | * (invoked with the wireless_dev mutex held) |
636a5d36 | 2031 | * @disassoc: Request to disassociate from the specified peer |
8d61ffa5 | 2032 | * (invoked with the wireless_dev mutex held) |
04a773ad | 2033 | * |
b23aa676 SO |
2034 | * @connect: Connect to the ESS with the specified parameters. When connected, |
2035 | * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS. | |
2036 | * If the connection fails for some reason, call cfg80211_connect_result() | |
2037 | * with the status from the AP. | |
8d61ffa5 | 2038 | * (invoked with the wireless_dev mutex held) |
b23aa676 | 2039 | * @disconnect: Disconnect from the BSS/ESS. |
8d61ffa5 | 2040 | * (invoked with the wireless_dev mutex held) |
b23aa676 | 2041 | * |
04a773ad JB |
2042 | * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call |
2043 | * cfg80211_ibss_joined(), also call that function when changing BSSID due | |
2044 | * to a merge. | |
8d61ffa5 | 2045 | * (invoked with the wireless_dev mutex held) |
04a773ad | 2046 | * @leave_ibss: Leave the IBSS. |
8d61ffa5 | 2047 | * (invoked with the wireless_dev mutex held) |
b9a5f8ca | 2048 | * |
f4e583c8 AQ |
2049 | * @set_mcast_rate: Set the specified multicast rate (only if vif is in ADHOC or |
2050 | * MESH mode) | |
2051 | * | |
b9a5f8ca JM |
2052 | * @set_wiphy_params: Notify that wiphy parameters have changed; |
2053 | * @changed bitfield (see &enum wiphy_params_flags) describes which values | |
2054 | * have changed. The actual parameter values are available in | |
2055 | * struct wiphy. If returning an error, no value should be changed. | |
7643a2c3 | 2056 | * |
1432de07 | 2057 | * @set_tx_power: set the transmit power according to the parameters, |
c8442118 JB |
2058 | * the power passed is in mBm, to get dBm use MBM_TO_DBM(). The |
2059 | * wdev may be %NULL if power was set for the wiphy, and will | |
2060 | * always be %NULL unless the driver supports per-vif TX power | |
2061 | * (as advertised by the nl80211 feature flag.) | |
7643a2c3 | 2062 | * @get_tx_power: store the current TX power into the dbm variable; |
1f87f7d3 JB |
2063 | * return 0 if successful |
2064 | * | |
abe37c4b JB |
2065 | * @set_wds_peer: set the WDS peer for a WDS interface |
2066 | * | |
1f87f7d3 JB |
2067 | * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting |
2068 | * functions to adjust rfkill hw state | |
aff89a9b | 2069 | * |
61fa713c HS |
2070 | * @dump_survey: get site survey information. |
2071 | * | |
9588bbd5 JM |
2072 | * @remain_on_channel: Request the driver to remain awake on the specified |
2073 | * channel for the specified duration to complete an off-channel | |
2074 | * operation (e.g., public action frame exchange). When the driver is | |
2075 | * ready on the requested channel, it must indicate this with an event | |
2076 | * notification by calling cfg80211_ready_on_channel(). | |
2077 | * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation. | |
2078 | * This allows the operation to be terminated prior to timeout based on | |
2079 | * the duration value. | |
f7ca38df JB |
2080 | * @mgmt_tx: Transmit a management frame. |
2081 | * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management | |
2082 | * frame on another channel | |
9588bbd5 | 2083 | * |
fc73f11f | 2084 | * @testmode_cmd: run a test mode command; @wdev may be %NULL |
71063f0e WYG |
2085 | * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be |
2086 | * used by the function, but 0 and 1 must not be touched. Additionally, | |
2087 | * return error codes other than -ENOBUFS and -ENOENT will terminate the | |
2088 | * dump and return to userspace with an error, so be careful. If any data | |
2089 | * was passed in from userspace then the data/len arguments will be present | |
2090 | * and point to the data contained in %NL80211_ATTR_TESTDATA. | |
67fbb16b | 2091 | * |
abe37c4b JB |
2092 | * @set_bitrate_mask: set the bitrate mask configuration |
2093 | * | |
67fbb16b SO |
2094 | * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac |
2095 | * devices running firmwares capable of generating the (re) association | |
2096 | * RSN IE. It allows for faster roaming between WPA2 BSSIDs. | |
2097 | * @del_pmksa: Delete a cached PMKID. | |
2098 | * @flush_pmksa: Flush all cached PMKIDs. | |
9043f3b8 JO |
2099 | * @set_power_mgmt: Configure WLAN power management. A timeout value of -1 |
2100 | * allows the driver to adjust the dynamic ps timeout value. | |
d6dc1a38 | 2101 | * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold. |
84f10708 TP |
2102 | * @set_cqm_txe_config: Configure connection quality monitor TX error |
2103 | * thresholds. | |
807f8a8c | 2104 | * @sched_scan_start: Tell the driver to start a scheduled scan. |
30d08a46 | 2105 | * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan. |
67fbb16b | 2106 | * |
271733cf JB |
2107 | * @mgmt_frame_register: Notify driver that a management frame type was |
2108 | * registered. Note that this callback may not sleep, and cannot run | |
2109 | * concurrently with itself. | |
547025d5 BR |
2110 | * |
2111 | * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device. | |
2112 | * Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may | |
2113 | * reject TX/RX mask combinations they cannot support by returning -EINVAL | |
2114 | * (also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX). | |
2115 | * | |
2116 | * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant). | |
3677713b JL |
2117 | * |
2118 | * @set_ringparam: Set tx and rx ring sizes. | |
2119 | * | |
2120 | * @get_ringparam: Get tx and rx ring current and maximum sizes. | |
109086ce AN |
2121 | * |
2122 | * @tdls_mgmt: Transmit a TDLS management frame. | |
2123 | * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup). | |
7f6cf311 JB |
2124 | * |
2125 | * @probe_client: probe an associated client, must return a cookie that it | |
2126 | * later passes to cfg80211_probe_status(). | |
1d9d9213 SW |
2127 | * |
2128 | * @set_noack_map: Set the NoAck Map for the TIDs. | |
d6199218 BG |
2129 | * |
2130 | * @get_et_sset_count: Ethtool API to get string-set count. | |
2131 | * See @ethtool_ops.get_sset_count | |
2132 | * | |
2133 | * @get_et_stats: Ethtool API to get a set of u64 stats. | |
2134 | * See @ethtool_ops.get_ethtool_stats | |
2135 | * | |
2136 | * @get_et_strings: Ethtool API to get a set of strings to describe stats | |
2137 | * and perhaps other supported types of ethtool data-sets. | |
2138 | * See @ethtool_ops.get_strings | |
5b7ccaf3 JB |
2139 | * |
2140 | * @get_channel: Get the current operating channel for the virtual interface. | |
2141 | * For monitor interfaces, it should return %NULL unless there's a single | |
2142 | * current monitoring channel. | |
98104fde JB |
2143 | * |
2144 | * @start_p2p_device: Start the given P2P device. | |
2145 | * @stop_p2p_device: Stop the given P2P device. | |
77765eaf VT |
2146 | * |
2147 | * @set_mac_acl: Sets MAC address control list in AP and P2P GO mode. | |
2148 | * Parameters include ACL policy, an array of MAC address of stations | |
2149 | * and the number of MAC addresses. If there is already a list in driver | |
2150 | * this new list replaces the existing one. Driver has to clear its ACL | |
2151 | * when number of MAC addresses entries is passed as 0. Drivers which | |
2152 | * advertise the support for MAC based ACL have to implement this callback. | |
04f39047 SW |
2153 | * |
2154 | * @start_radar_detection: Start radar detection in the driver. | |
8bf24293 JM |
2155 | * |
2156 | * @update_ft_ies: Provide updated Fast BSS Transition information to the | |
2157 | * driver. If the SME is in the driver/firmware, this information can be | |
2158 | * used in building Authentication and Reassociation Request frames. | |
5de17984 AS |
2159 | * |
2160 | * @crit_proto_start: Indicates a critical protocol needs more link reliability | |
2161 | * for a given duration (milliseconds). The protocol is provided so the | |
2162 | * driver can take the most appropriate actions. | |
2163 | * @crit_proto_stop: Indicates critical protocol no longer needs increased link | |
2164 | * reliability. This operation can not fail. | |
be29b99a | 2165 | * @set_coalesce: Set coalesce parameters. |
16ef1fe2 SW |
2166 | * |
2167 | * @channel_switch: initiate channel-switch procedure (with CSA) | |
704232c2 JB |
2168 | */ |
2169 | struct cfg80211_ops { | |
ff1b6e69 | 2170 | int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); |
0378b3f1 | 2171 | int (*resume)(struct wiphy *wiphy); |
6d52563f | 2172 | void (*set_wakeup)(struct wiphy *wiphy, bool enabled); |
0378b3f1 | 2173 | |
84efbb84 | 2174 | struct wireless_dev * (*add_virtual_intf)(struct wiphy *wiphy, |
552bff0c | 2175 | const char *name, |
84efbb84 JB |
2176 | enum nl80211_iftype type, |
2177 | u32 *flags, | |
2178 | struct vif_params *params); | |
2179 | int (*del_virtual_intf)(struct wiphy *wiphy, | |
2180 | struct wireless_dev *wdev); | |
e36d56b6 JB |
2181 | int (*change_virtual_intf)(struct wiphy *wiphy, |
2182 | struct net_device *dev, | |
2ec600d6 LCC |
2183 | enum nl80211_iftype type, u32 *flags, |
2184 | struct vif_params *params); | |
41ade00f JB |
2185 | |
2186 | int (*add_key)(struct wiphy *wiphy, struct net_device *netdev, | |
e31b8213 | 2187 | u8 key_index, bool pairwise, const u8 *mac_addr, |
41ade00f JB |
2188 | struct key_params *params); |
2189 | int (*get_key)(struct wiphy *wiphy, struct net_device *netdev, | |
e31b8213 JB |
2190 | u8 key_index, bool pairwise, const u8 *mac_addr, |
2191 | void *cookie, | |
41ade00f JB |
2192 | void (*callback)(void *cookie, struct key_params*)); |
2193 | int (*del_key)(struct wiphy *wiphy, struct net_device *netdev, | |
e31b8213 | 2194 | u8 key_index, bool pairwise, const u8 *mac_addr); |
41ade00f JB |
2195 | int (*set_default_key)(struct wiphy *wiphy, |
2196 | struct net_device *netdev, | |
dbd2fd65 | 2197 | u8 key_index, bool unicast, bool multicast); |
3cfcf6ac JM |
2198 | int (*set_default_mgmt_key)(struct wiphy *wiphy, |
2199 | struct net_device *netdev, | |
2200 | u8 key_index); | |
ed1b6cc7 | 2201 | |
8860020e JB |
2202 | int (*start_ap)(struct wiphy *wiphy, struct net_device *dev, |
2203 | struct cfg80211_ap_settings *settings); | |
2204 | int (*change_beacon)(struct wiphy *wiphy, struct net_device *dev, | |
2205 | struct cfg80211_beacon_data *info); | |
2206 | int (*stop_ap)(struct wiphy *wiphy, struct net_device *dev); | |
5727ef1b JB |
2207 | |
2208 | ||
2209 | int (*add_station)(struct wiphy *wiphy, struct net_device *dev, | |
2210 | u8 *mac, struct station_parameters *params); | |
2211 | int (*del_station)(struct wiphy *wiphy, struct net_device *dev, | |
2212 | u8 *mac); | |
2213 | int (*change_station)(struct wiphy *wiphy, struct net_device *dev, | |
2214 | u8 *mac, struct station_parameters *params); | |
fd5b74dc | 2215 | int (*get_station)(struct wiphy *wiphy, struct net_device *dev, |
2ec600d6 LCC |
2216 | u8 *mac, struct station_info *sinfo); |
2217 | int (*dump_station)(struct wiphy *wiphy, struct net_device *dev, | |
2218 | int idx, u8 *mac, struct station_info *sinfo); | |
2219 | ||
2220 | int (*add_mpath)(struct wiphy *wiphy, struct net_device *dev, | |
2221 | u8 *dst, u8 *next_hop); | |
2222 | int (*del_mpath)(struct wiphy *wiphy, struct net_device *dev, | |
2223 | u8 *dst); | |
2224 | int (*change_mpath)(struct wiphy *wiphy, struct net_device *dev, | |
2225 | u8 *dst, u8 *next_hop); | |
2226 | int (*get_mpath)(struct wiphy *wiphy, struct net_device *dev, | |
2227 | u8 *dst, u8 *next_hop, | |
2228 | struct mpath_info *pinfo); | |
2229 | int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev, | |
2230 | int idx, u8 *dst, u8 *next_hop, | |
2231 | struct mpath_info *pinfo); | |
24bdd9f4 | 2232 | int (*get_mesh_config)(struct wiphy *wiphy, |
93da9cc1 | 2233 | struct net_device *dev, |
2234 | struct mesh_config *conf); | |
24bdd9f4 | 2235 | int (*update_mesh_config)(struct wiphy *wiphy, |
29cbe68c JB |
2236 | struct net_device *dev, u32 mask, |
2237 | const struct mesh_config *nconf); | |
2238 | int (*join_mesh)(struct wiphy *wiphy, struct net_device *dev, | |
2239 | const struct mesh_config *conf, | |
2240 | const struct mesh_setup *setup); | |
2241 | int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev); | |
2242 | ||
9f1ba906 JM |
2243 | int (*change_bss)(struct wiphy *wiphy, struct net_device *dev, |
2244 | struct bss_parameters *params); | |
31888487 | 2245 | |
f70f01c2 | 2246 | int (*set_txq_params)(struct wiphy *wiphy, struct net_device *dev, |
31888487 | 2247 | struct ieee80211_txq_params *params); |
72bdcf34 | 2248 | |
e8c9bd5b JB |
2249 | int (*libertas_set_mesh_channel)(struct wiphy *wiphy, |
2250 | struct net_device *dev, | |
2251 | struct ieee80211_channel *chan); | |
2252 | ||
2253 | int (*set_monitor_channel)(struct wiphy *wiphy, | |
683b6d3b | 2254 | struct cfg80211_chan_def *chandef); |
9aed3cc1 | 2255 | |
fd014284 | 2256 | int (*scan)(struct wiphy *wiphy, |
2a519311 | 2257 | struct cfg80211_scan_request *request); |
636a5d36 JM |
2258 | |
2259 | int (*auth)(struct wiphy *wiphy, struct net_device *dev, | |
2260 | struct cfg80211_auth_request *req); | |
2261 | int (*assoc)(struct wiphy *wiphy, struct net_device *dev, | |
2262 | struct cfg80211_assoc_request *req); | |
2263 | int (*deauth)(struct wiphy *wiphy, struct net_device *dev, | |
63c9c5e7 | 2264 | struct cfg80211_deauth_request *req); |
636a5d36 | 2265 | int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, |
63c9c5e7 | 2266 | struct cfg80211_disassoc_request *req); |
04a773ad | 2267 | |
b23aa676 SO |
2268 | int (*connect)(struct wiphy *wiphy, struct net_device *dev, |
2269 | struct cfg80211_connect_params *sme); | |
2270 | int (*disconnect)(struct wiphy *wiphy, struct net_device *dev, | |
2271 | u16 reason_code); | |
2272 | ||
04a773ad JB |
2273 | int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev, |
2274 | struct cfg80211_ibss_params *params); | |
2275 | int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); | |
b9a5f8ca | 2276 | |
f4e583c8 AQ |
2277 | int (*set_mcast_rate)(struct wiphy *wiphy, struct net_device *dev, |
2278 | int rate[IEEE80211_NUM_BANDS]); | |
2279 | ||
b9a5f8ca | 2280 | int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); |
7643a2c3 | 2281 | |
c8442118 | 2282 | int (*set_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, |
fa61cf70 | 2283 | enum nl80211_tx_power_setting type, int mbm); |
c8442118 JB |
2284 | int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, |
2285 | int *dbm); | |
1f87f7d3 | 2286 | |
ab737a4f | 2287 | int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, |
388ac775 | 2288 | const u8 *addr); |
ab737a4f | 2289 | |
1f87f7d3 | 2290 | void (*rfkill_poll)(struct wiphy *wiphy); |
aff89a9b JB |
2291 | |
2292 | #ifdef CONFIG_NL80211_TESTMODE | |
fc73f11f DS |
2293 | int (*testmode_cmd)(struct wiphy *wiphy, struct wireless_dev *wdev, |
2294 | void *data, int len); | |
71063f0e WYG |
2295 | int (*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb, |
2296 | struct netlink_callback *cb, | |
2297 | void *data, int len); | |
aff89a9b | 2298 | #endif |
bc92afd9 | 2299 | |
9930380f JB |
2300 | int (*set_bitrate_mask)(struct wiphy *wiphy, |
2301 | struct net_device *dev, | |
2302 | const u8 *peer, | |
2303 | const struct cfg80211_bitrate_mask *mask); | |
2304 | ||
61fa713c HS |
2305 | int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev, |
2306 | int idx, struct survey_info *info); | |
2307 | ||
67fbb16b SO |
2308 | int (*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev, |
2309 | struct cfg80211_pmksa *pmksa); | |
2310 | int (*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev, | |
2311 | struct cfg80211_pmksa *pmksa); | |
2312 | int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev); | |
2313 | ||
9588bbd5 | 2314 | int (*remain_on_channel)(struct wiphy *wiphy, |
71bbc994 | 2315 | struct wireless_dev *wdev, |
9588bbd5 | 2316 | struct ieee80211_channel *chan, |
9588bbd5 JM |
2317 | unsigned int duration, |
2318 | u64 *cookie); | |
2319 | int (*cancel_remain_on_channel)(struct wiphy *wiphy, | |
71bbc994 | 2320 | struct wireless_dev *wdev, |
9588bbd5 JM |
2321 | u64 cookie); |
2322 | ||
71bbc994 | 2323 | int (*mgmt_tx)(struct wiphy *wiphy, struct wireless_dev *wdev, |
f7ca38df | 2324 | struct ieee80211_channel *chan, bool offchan, |
42d97a59 JB |
2325 | unsigned int wait, const u8 *buf, size_t len, |
2326 | bool no_cck, bool dont_wait_for_ack, u64 *cookie); | |
f7ca38df | 2327 | int (*mgmt_tx_cancel_wait)(struct wiphy *wiphy, |
71bbc994 | 2328 | struct wireless_dev *wdev, |
f7ca38df | 2329 | u64 cookie); |
026331c4 | 2330 | |
bc92afd9 JB |
2331 | int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, |
2332 | bool enabled, int timeout); | |
d6dc1a38 JO |
2333 | |
2334 | int (*set_cqm_rssi_config)(struct wiphy *wiphy, | |
2335 | struct net_device *dev, | |
2336 | s32 rssi_thold, u32 rssi_hyst); | |
271733cf | 2337 | |
84f10708 TP |
2338 | int (*set_cqm_txe_config)(struct wiphy *wiphy, |
2339 | struct net_device *dev, | |
2340 | u32 rate, u32 pkts, u32 intvl); | |
2341 | ||
271733cf | 2342 | void (*mgmt_frame_register)(struct wiphy *wiphy, |
71bbc994 | 2343 | struct wireless_dev *wdev, |
271733cf | 2344 | u16 frame_type, bool reg); |
afe0cbf8 BR |
2345 | |
2346 | int (*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant); | |
2347 | int (*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant); | |
3677713b JL |
2348 | |
2349 | int (*set_ringparam)(struct wiphy *wiphy, u32 tx, u32 rx); | |
2350 | void (*get_ringparam)(struct wiphy *wiphy, | |
2351 | u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max); | |
807f8a8c LC |
2352 | |
2353 | int (*sched_scan_start)(struct wiphy *wiphy, | |
2354 | struct net_device *dev, | |
2355 | struct cfg80211_sched_scan_request *request); | |
85a9994a | 2356 | int (*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev); |
e5497d76 JB |
2357 | |
2358 | int (*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev, | |
2359 | struct cfg80211_gtk_rekey_data *data); | |
109086ce AN |
2360 | |
2361 | int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev, | |
2362 | u8 *peer, u8 action_code, u8 dialog_token, | |
2363 | u16 status_code, const u8 *buf, size_t len); | |
2364 | int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev, | |
2365 | u8 *peer, enum nl80211_tdls_operation oper); | |
7f6cf311 JB |
2366 | |
2367 | int (*probe_client)(struct wiphy *wiphy, struct net_device *dev, | |
2368 | const u8 *peer, u64 *cookie); | |
e999882a | 2369 | |
1d9d9213 SW |
2370 | int (*set_noack_map)(struct wiphy *wiphy, |
2371 | struct net_device *dev, | |
2372 | u16 noack_map); | |
2373 | ||
d6199218 BG |
2374 | int (*get_et_sset_count)(struct wiphy *wiphy, |
2375 | struct net_device *dev, int sset); | |
2376 | void (*get_et_stats)(struct wiphy *wiphy, struct net_device *dev, | |
2377 | struct ethtool_stats *stats, u64 *data); | |
2378 | void (*get_et_strings)(struct wiphy *wiphy, struct net_device *dev, | |
2379 | u32 sset, u8 *data); | |
dbbae26a | 2380 | |
683b6d3b | 2381 | int (*get_channel)(struct wiphy *wiphy, |
5b7ccaf3 | 2382 | struct wireless_dev *wdev, |
683b6d3b | 2383 | struct cfg80211_chan_def *chandef); |
98104fde JB |
2384 | |
2385 | int (*start_p2p_device)(struct wiphy *wiphy, | |
2386 | struct wireless_dev *wdev); | |
2387 | void (*stop_p2p_device)(struct wiphy *wiphy, | |
2388 | struct wireless_dev *wdev); | |
77765eaf VT |
2389 | |
2390 | int (*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev, | |
2391 | const struct cfg80211_acl_data *params); | |
04f39047 SW |
2392 | |
2393 | int (*start_radar_detection)(struct wiphy *wiphy, | |
2394 | struct net_device *dev, | |
2395 | struct cfg80211_chan_def *chandef); | |
355199e0 JM |
2396 | int (*update_ft_ies)(struct wiphy *wiphy, struct net_device *dev, |
2397 | struct cfg80211_update_ft_ies_params *ftie); | |
5de17984 AS |
2398 | int (*crit_proto_start)(struct wiphy *wiphy, |
2399 | struct wireless_dev *wdev, | |
2400 | enum nl80211_crit_proto_id protocol, | |
2401 | u16 duration); | |
2402 | void (*crit_proto_stop)(struct wiphy *wiphy, | |
2403 | struct wireless_dev *wdev); | |
be29b99a AK |
2404 | int (*set_coalesce)(struct wiphy *wiphy, |
2405 | struct cfg80211_coalesce *coalesce); | |
16ef1fe2 SW |
2406 | |
2407 | int (*channel_switch)(struct wiphy *wiphy, | |
2408 | struct net_device *dev, | |
2409 | struct cfg80211_csa_settings *params); | |
704232c2 JB |
2410 | }; |
2411 | ||
d3236553 JB |
2412 | /* |
2413 | * wireless hardware and networking interfaces structures | |
2414 | * and registration/helper functions | |
2415 | */ | |
2416 | ||
2417 | /** | |
5be83de5 JB |
2418 | * enum wiphy_flags - wiphy capability flags |
2419 | * | |
2420 | * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device | |
d3236553 JB |
2421 | * has its own custom regulatory domain and cannot identify the |
2422 | * ISO / IEC 3166 alpha2 it belongs to. When this is enabled | |
2423 | * we will disregard the first regulatory hint (when the | |
2424 | * initiator is %REGDOM_SET_BY_CORE). | |
5be83de5 JB |
2425 | * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will |
2426 | * ignore regulatory domain settings until it gets its own regulatory | |
749b527b LR |
2427 | * domain via its regulatory_hint() unless the regulatory hint is |
2428 | * from a country IE. After its gets its own regulatory domain it will | |
2429 | * only allow further regulatory domain settings to further enhance | |
2430 | * compliance. For example if channel 13 and 14 are disabled by this | |
2431 | * regulatory domain no user regulatory domain can enable these channels | |
2432 | * at a later time. This can be used for devices which do not have | |
2433 | * calibration information guaranteed for frequencies or settings | |
061acaae LR |
2434 | * outside of its regulatory domain. If used in combination with |
2435 | * WIPHY_FLAG_CUSTOM_REGULATORY the inspected country IE power settings | |
2436 | * will be followed. | |
5be83de5 JB |
2437 | * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure |
2438 | * that passive scan flags and beaconing flags may not be lifted by | |
2439 | * cfg80211 due to regulatory beacon hints. For more information on beacon | |
37184244 | 2440 | * hints read the documenation for regulatory_hint_found_beacon() |
5be83de5 JB |
2441 | * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this |
2442 | * wiphy at all | |
2443 | * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled | |
2444 | * by default -- this flag will be set depending on the kernel's default | |
2445 | * on wiphy_new(), but can be changed by the driver if it has a good | |
2446 | * reason to override the default | |
9bc383de JB |
2447 | * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station |
2448 | * on a VLAN interface) | |
2449 | * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station | |
c0692b8f JB |
2450 | * @WIPHY_FLAG_CONTROL_PORT_PROTOCOL: This device supports setting the |
2451 | * control port protocol ethertype. The device also honours the | |
2452 | * control_port_no_encrypt flag. | |
e31b8213 | 2453 | * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN. |
15d5dda6 JC |
2454 | * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing |
2455 | * auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH. | |
1ba01458 | 2456 | * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans. |
f4b34b55 VN |
2457 | * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the |
2458 | * firmware. | |
cedb5412 | 2459 | * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP. |
109086ce AN |
2460 | * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation. |
2461 | * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z) | |
2462 | * link setup/discovery operations internally. Setup, discovery and | |
2463 | * teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT | |
2464 | * command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be | |
2465 | * used for asking the driver/firmware to perform a TDLS operation. | |
562a7480 | 2466 | * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME |
5e760230 JB |
2467 | * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes |
2468 | * when there are virtual interfaces in AP mode by calling | |
2469 | * cfg80211_report_obss_beacon(). | |
87bbbe22 AN |
2470 | * @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD: When operating as an AP, the device |
2471 | * responds to probe-requests in hardware. | |
7c4ef712 JB |
2472 | * @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX. |
2473 | * @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call. | |
2f301ab2 | 2474 | * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. |
16ef1fe2 SW |
2475 | * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in |
2476 | * beaconing mode (AP, IBSS, Mesh, ...). | |
5be83de5 JB |
2477 | */ |
2478 | enum wiphy_flags { | |
c0692b8f JB |
2479 | WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), |
2480 | WIPHY_FLAG_STRICT_REGULATORY = BIT(1), | |
2481 | WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2), | |
2482 | WIPHY_FLAG_NETNS_OK = BIT(3), | |
2483 | WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), | |
2484 | WIPHY_FLAG_4ADDR_AP = BIT(5), | |
2485 | WIPHY_FLAG_4ADDR_STATION = BIT(6), | |
2486 | WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), | |
309075cf | 2487 | WIPHY_FLAG_IBSS_RSN = BIT(8), |
15d5dda6 | 2488 | WIPHY_FLAG_MESH_AUTH = BIT(10), |
807f8a8c | 2489 | WIPHY_FLAG_SUPPORTS_SCHED_SCAN = BIT(11), |
8e8b41f9 | 2490 | /* use hole at 12 */ |
f4b34b55 | 2491 | WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), |
cedb5412 | 2492 | WIPHY_FLAG_AP_UAPSD = BIT(14), |
109086ce AN |
2493 | WIPHY_FLAG_SUPPORTS_TDLS = BIT(15), |
2494 | WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16), | |
562a7480 | 2495 | WIPHY_FLAG_HAVE_AP_SME = BIT(17), |
5e760230 | 2496 | WIPHY_FLAG_REPORTS_OBSS = BIT(18), |
87bbbe22 | 2497 | WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19), |
7c4ef712 JB |
2498 | WIPHY_FLAG_OFFCHAN_TX = BIT(20), |
2499 | WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21), | |
2f301ab2 | 2500 | WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22), |
16ef1fe2 | 2501 | WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23), |
7527a782 JB |
2502 | }; |
2503 | ||
2504 | /** | |
2505 | * struct ieee80211_iface_limit - limit on certain interface types | |
2506 | * @max: maximum number of interfaces of these types | |
2507 | * @types: interface types (bits) | |
2508 | */ | |
2509 | struct ieee80211_iface_limit { | |
2510 | u16 max; | |
2511 | u16 types; | |
2512 | }; | |
2513 | ||
2514 | /** | |
2515 | * struct ieee80211_iface_combination - possible interface combination | |
2516 | * @limits: limits for the given interface types | |
2517 | * @n_limits: number of limitations | |
2518 | * @num_different_channels: can use up to this many different channels | |
2519 | * @max_interfaces: maximum number of interfaces in total allowed in this | |
2520 | * group | |
2521 | * @beacon_int_infra_match: In this combination, the beacon intervals | |
2522 | * between infrastructure and AP types must match. This is required | |
2523 | * only in special cases. | |
11c4a075 | 2524 | * @radar_detect_widths: bitmap of channel widths supported for radar detection |
7527a782 JB |
2525 | * |
2526 | * These examples can be expressed as follows: | |
2527 | * | |
2528 | * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total: | |
2529 | * | |
2530 | * struct ieee80211_iface_limit limits1[] = { | |
2531 | * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), }, | |
2532 | * { .max = 1, .types = BIT(NL80211_IFTYPE_AP}, }, | |
2533 | * }; | |
2534 | * struct ieee80211_iface_combination combination1 = { | |
2535 | * .limits = limits1, | |
2536 | * .n_limits = ARRAY_SIZE(limits1), | |
2537 | * .max_interfaces = 2, | |
2538 | * .beacon_int_infra_match = true, | |
2539 | * }; | |
2540 | * | |
2541 | * | |
2542 | * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total: | |
2543 | * | |
2544 | * struct ieee80211_iface_limit limits2[] = { | |
2545 | * { .max = 8, .types = BIT(NL80211_IFTYPE_AP) | | |
2546 | * BIT(NL80211_IFTYPE_P2P_GO), }, | |
2547 | * }; | |
2548 | * struct ieee80211_iface_combination combination2 = { | |
2549 | * .limits = limits2, | |
2550 | * .n_limits = ARRAY_SIZE(limits2), | |
2551 | * .max_interfaces = 8, | |
2552 | * .num_different_channels = 1, | |
2553 | * }; | |
2554 | * | |
2555 | * | |
2556 | * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total. | |
2557 | * This allows for an infrastructure connection and three P2P connections. | |
2558 | * | |
2559 | * struct ieee80211_iface_limit limits3[] = { | |
2560 | * { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), }, | |
2561 | * { .max = 3, .types = BIT(NL80211_IFTYPE_P2P_GO) | | |
2562 | * BIT(NL80211_IFTYPE_P2P_CLIENT), }, | |
2563 | * }; | |
2564 | * struct ieee80211_iface_combination combination3 = { | |
2565 | * .limits = limits3, | |
2566 | * .n_limits = ARRAY_SIZE(limits3), | |
2567 | * .max_interfaces = 4, | |
2568 | * .num_different_channels = 2, | |
2569 | * }; | |
2570 | */ | |
2571 | struct ieee80211_iface_combination { | |
2572 | const struct ieee80211_iface_limit *limits; | |
2573 | u32 num_different_channels; | |
2574 | u16 max_interfaces; | |
2575 | u8 n_limits; | |
2576 | bool beacon_int_infra_match; | |
11c4a075 | 2577 | u8 radar_detect_widths; |
5be83de5 JB |
2578 | }; |
2579 | ||
2e161f78 JB |
2580 | struct ieee80211_txrx_stypes { |
2581 | u16 tx, rx; | |
2582 | }; | |
2583 | ||
ff1b6e69 JB |
2584 | /** |
2585 | * enum wiphy_wowlan_support_flags - WoWLAN support flags | |
2586 | * @WIPHY_WOWLAN_ANY: supports wakeup for the special "any" | |
2587 | * trigger that keeps the device operating as-is and | |
2588 | * wakes up the host on any activity, for example a | |
2589 | * received packet that passed filtering; note that the | |
2590 | * packet should be preserved in that case | |
2591 | * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet | |
2592 | * (see nl80211.h) | |
2593 | * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect | |
77dbbb13 JB |
2594 | * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep |
2595 | * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure | |
2596 | * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request | |
2597 | * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure | |
2598 | * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release | |
ff1b6e69 JB |
2599 | */ |
2600 | enum wiphy_wowlan_support_flags { | |
77dbbb13 JB |
2601 | WIPHY_WOWLAN_ANY = BIT(0), |
2602 | WIPHY_WOWLAN_MAGIC_PKT = BIT(1), | |
2603 | WIPHY_WOWLAN_DISCONNECT = BIT(2), | |
2604 | WIPHY_WOWLAN_SUPPORTS_GTK_REKEY = BIT(3), | |
2605 | WIPHY_WOWLAN_GTK_REKEY_FAILURE = BIT(4), | |
2606 | WIPHY_WOWLAN_EAP_IDENTITY_REQ = BIT(5), | |
2607 | WIPHY_WOWLAN_4WAY_HANDSHAKE = BIT(6), | |
2608 | WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), | |
ff1b6e69 JB |
2609 | }; |
2610 | ||
2a0e047e JB |
2611 | struct wiphy_wowlan_tcp_support { |
2612 | const struct nl80211_wowlan_tcp_data_token_feature *tok; | |
2613 | u32 data_payload_max; | |
2614 | u32 data_interval_max; | |
2615 | u32 wake_payload_max; | |
2616 | bool seq; | |
2617 | }; | |
2618 | ||
ff1b6e69 JB |
2619 | /** |
2620 | * struct wiphy_wowlan_support - WoWLAN support data | |
2621 | * @flags: see &enum wiphy_wowlan_support_flags | |
2622 | * @n_patterns: number of supported wakeup patterns | |
2623 | * (see nl80211.h for the pattern definition) | |
2624 | * @pattern_max_len: maximum length of each pattern | |
2625 | * @pattern_min_len: minimum length of each pattern | |
bb92d199 | 2626 | * @max_pkt_offset: maximum Rx packet offset |
2a0e047e | 2627 | * @tcp: TCP wakeup support information |
ff1b6e69 JB |
2628 | */ |
2629 | struct wiphy_wowlan_support { | |
2630 | u32 flags; | |
2631 | int n_patterns; | |
2632 | int pattern_max_len; | |
2633 | int pattern_min_len; | |
bb92d199 | 2634 | int max_pkt_offset; |
2a0e047e | 2635 | const struct wiphy_wowlan_tcp_support *tcp; |
ff1b6e69 JB |
2636 | }; |
2637 | ||
be29b99a AK |
2638 | /** |
2639 | * struct wiphy_coalesce_support - coalesce support data | |
2640 | * @n_rules: maximum number of coalesce rules | |
2641 | * @max_delay: maximum supported coalescing delay in msecs | |
2642 | * @n_patterns: number of supported patterns in a rule | |
2643 | * (see nl80211.h for the pattern definition) | |
2644 | * @pattern_max_len: maximum length of each pattern | |
2645 | * @pattern_min_len: minimum length of each pattern | |
2646 | * @max_pkt_offset: maximum Rx packet offset | |
2647 | */ | |
2648 | struct wiphy_coalesce_support { | |
2649 | int n_rules; | |
2650 | int max_delay; | |
2651 | int n_patterns; | |
2652 | int pattern_max_len; | |
2653 | int pattern_min_len; | |
2654 | int max_pkt_offset; | |
2655 | }; | |
2656 | ||
5be83de5 JB |
2657 | /** |
2658 | * struct wiphy - wireless hardware description | |
2784fe91 LR |
2659 | * @reg_notifier: the driver's regulatory notification callback, |
2660 | * note that if your driver uses wiphy_apply_custom_regulatory() | |
2661 | * the reg_notifier's request can be passed as NULL | |
d3236553 JB |
2662 | * @regd: the driver's regulatory domain, if one was requested via |
2663 | * the regulatory_hint() API. This can be used by the driver | |
2664 | * on the reg_notifier() if it chooses to ignore future | |
2665 | * regulatory domain changes caused by other drivers. | |
2666 | * @signal_type: signal type reported in &struct cfg80211_bss. | |
2667 | * @cipher_suites: supported cipher suites | |
2668 | * @n_cipher_suites: number of supported cipher suites | |
b9a5f8ca JM |
2669 | * @retry_short: Retry limit for short frames (dot11ShortRetryLimit) |
2670 | * @retry_long: Retry limit for long frames (dot11LongRetryLimit) | |
2671 | * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold); | |
2672 | * -1 = fragmentation disabled, only odd values >= 256 used | |
2673 | * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled | |
abe37c4b | 2674 | * @_net: the network namespace this wiphy currently lives in |
ef15aac6 JB |
2675 | * @perm_addr: permanent MAC address of this device |
2676 | * @addr_mask: If the device supports multiple MAC addresses by masking, | |
2677 | * set this to a mask with variable bits set to 1, e.g. if the last | |
2678 | * four bits are variable then set it to 00:...:00:0f. The actual | |
2679 | * variable bits shall be determined by the interfaces added, with | |
2680 | * interfaces not matching the mask being rejected to be brought up. | |
2681 | * @n_addresses: number of addresses in @addresses. | |
2682 | * @addresses: If the device has more than one address, set this pointer | |
2683 | * to a list of addresses (6 bytes each). The first one will be used | |
2684 | * by default for perm_addr. In this case, the mask should be set to | |
2685 | * all-zeroes. In this case it is assumed that the device can handle | |
2686 | * the same number of arbitrary MAC addresses. | |
fd235913 RD |
2687 | * @registered: protects ->resume and ->suspend sysfs callbacks against |
2688 | * unregister hardware | |
abe37c4b JB |
2689 | * @debugfsdir: debugfs directory used for this wiphy, will be renamed |
2690 | * automatically on wiphy renames | |
2691 | * @dev: (virtual) struct device for this wiphy | |
4a711a85 | 2692 | * @registered: helps synchronize suspend/resume with wiphy unregister |
abe37c4b JB |
2693 | * @wext: wireless extension handlers |
2694 | * @priv: driver private data (sized according to wiphy_new() parameter) | |
2695 | * @interface_modes: bitmask of interfaces types valid for this wiphy, | |
2696 | * must be set by driver | |
7527a782 JB |
2697 | * @iface_combinations: Valid interface combinations array, should not |
2698 | * list single interface types. | |
2699 | * @n_iface_combinations: number of entries in @iface_combinations array. | |
2700 | * @software_iftypes: bitmask of software interface types, these are not | |
2701 | * subject to any restrictions since they are purely managed in SW. | |
abe37c4b | 2702 | * @flags: wiphy flags, see &enum wiphy_flags |
1f074bd8 | 2703 | * @features: features advertised to nl80211, see &enum nl80211_feature_flags. |
abe37c4b JB |
2704 | * @bss_priv_size: each BSS struct has private data allocated with it, |
2705 | * this variable determines its size | |
2706 | * @max_scan_ssids: maximum number of SSIDs the device can scan for in | |
2707 | * any given scan | |
93b6aa69 LC |
2708 | * @max_sched_scan_ssids: maximum number of SSIDs the device can scan |
2709 | * for in any given scheduled scan | |
a1f1c21c LC |
2710 | * @max_match_sets: maximum number of match sets the device can handle |
2711 | * when performing a scheduled scan, 0 if filtering is not | |
2712 | * supported. | |
abe37c4b JB |
2713 | * @max_scan_ie_len: maximum length of user-controlled IEs device can |
2714 | * add to probe request frames transmitted during a scan, must not | |
2715 | * include fixed IEs like supported rates | |
5a865bad LC |
2716 | * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled |
2717 | * scans | |
abe37c4b JB |
2718 | * @coverage_class: current coverage class |
2719 | * @fw_version: firmware version for ethtool reporting | |
2720 | * @hw_version: hardware version for ethtool reporting | |
2721 | * @max_num_pmkids: maximum number of PMKIDs supported by device | |
2722 | * @privid: a pointer that drivers can use to identify if an arbitrary | |
2723 | * wiphy is theirs, e.g. in global notifiers | |
2724 | * @bands: information about bands/channels supported by this device | |
2e161f78 JB |
2725 | * |
2726 | * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or | |
2727 | * transmitted through nl80211, points to an array indexed by interface | |
2728 | * type | |
a7ffac95 | 2729 | * |
7f531e03 BR |
2730 | * @available_antennas_tx: bitmap of antennas which are available to be |
2731 | * configured as TX antennas. Antenna configuration commands will be | |
2732 | * rejected unless this or @available_antennas_rx is set. | |
2733 | * | |
2734 | * @available_antennas_rx: bitmap of antennas which are available to be | |
2735 | * configured as RX antennas. Antenna configuration commands will be | |
2736 | * rejected unless this or @available_antennas_tx is set. | |
a293911d | 2737 | * |
15f0ebc2 RD |
2738 | * @probe_resp_offload: |
2739 | * Bitmap of supported protocols for probe response offloading. | |
2740 | * See &enum nl80211_probe_resp_offload_support_attr. Only valid | |
2741 | * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set. | |
2742 | * | |
a293911d JB |
2743 | * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation |
2744 | * may request, if implemented. | |
ff1b6e69 JB |
2745 | * |
2746 | * @wowlan: WoWLAN support information | |
6abb9cb9 JB |
2747 | * @wowlan_config: current WoWLAN configuration; this should usually not be |
2748 | * used since access to it is necessarily racy, use the parameter passed | |
2749 | * to the suspend() operation instead. | |
562a7480 JB |
2750 | * |
2751 | * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features. | |
7e7c8926 BG |
2752 | * @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden. |
2753 | * If null, then none can be over-ridden. | |
ee2aca34 JB |
2754 | * @vht_capa_mod_mask: Specify what VHT capabilities can be over-ridden. |
2755 | * If null, then none can be over-ridden. | |
77765eaf VT |
2756 | * |
2757 | * @max_acl_mac_addrs: Maximum number of MAC addresses that the device | |
2758 | * supports for ACL. | |
a50df0c4 JB |
2759 | * |
2760 | * @extended_capabilities: extended capabilities supported by the driver, | |
2761 | * additional capabilities might be supported by userspace; these are | |
2762 | * the 802.11 extended capabilities ("Extended Capabilities element") | |
2763 | * and are in the same format as in the information element. See | |
2764 | * 802.11-2012 8.4.2.29 for the defined fields. | |
2765 | * @extended_capabilities_mask: mask of the valid values | |
2766 | * @extended_capabilities_len: length of the extended capabilities | |
be29b99a | 2767 | * @coalesce: packet coalescing support information |
d3236553 JB |
2768 | */ |
2769 | struct wiphy { | |
2770 | /* assign these fields before you register the wiphy */ | |
2771 | ||
ef15aac6 | 2772 | /* permanent MAC address(es) */ |
d3236553 | 2773 | u8 perm_addr[ETH_ALEN]; |
ef15aac6 JB |
2774 | u8 addr_mask[ETH_ALEN]; |
2775 | ||
ef15aac6 | 2776 | struct mac_address *addresses; |
d3236553 | 2777 | |
2e161f78 JB |
2778 | const struct ieee80211_txrx_stypes *mgmt_stypes; |
2779 | ||
7527a782 JB |
2780 | const struct ieee80211_iface_combination *iface_combinations; |
2781 | int n_iface_combinations; | |
2782 | u16 software_iftypes; | |
2783 | ||
2e161f78 JB |
2784 | u16 n_addresses; |
2785 | ||
d3236553 JB |
2786 | /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ |
2787 | u16 interface_modes; | |
2788 | ||
77765eaf VT |
2789 | u16 max_acl_mac_addrs; |
2790 | ||
1f074bd8 | 2791 | u32 flags, features; |
463d0183 | 2792 | |
562a7480 JB |
2793 | u32 ap_sme_capa; |
2794 | ||
d3236553 JB |
2795 | enum cfg80211_signal_type signal_type; |
2796 | ||
2797 | int bss_priv_size; | |
2798 | u8 max_scan_ssids; | |
93b6aa69 | 2799 | u8 max_sched_scan_ssids; |
a1f1c21c | 2800 | u8 max_match_sets; |
d3236553 | 2801 | u16 max_scan_ie_len; |
5a865bad | 2802 | u16 max_sched_scan_ie_len; |
d3236553 JB |
2803 | |
2804 | int n_cipher_suites; | |
2805 | const u32 *cipher_suites; | |
2806 | ||
b9a5f8ca JM |
2807 | u8 retry_short; |
2808 | u8 retry_long; | |
2809 | u32 frag_threshold; | |
2810 | u32 rts_threshold; | |
81077e82 | 2811 | u8 coverage_class; |
b9a5f8ca | 2812 | |
81135548 | 2813 | char fw_version[ETHTOOL_FWVERS_LEN]; |
dfce95f5 KV |
2814 | u32 hw_version; |
2815 | ||
dfb89c56 | 2816 | #ifdef CONFIG_PM |
964dc9e2 | 2817 | const struct wiphy_wowlan_support *wowlan; |
6abb9cb9 | 2818 | struct cfg80211_wowlan *wowlan_config; |
dfb89c56 | 2819 | #endif |
ff1b6e69 | 2820 | |
a293911d JB |
2821 | u16 max_remain_on_channel_duration; |
2822 | ||
67fbb16b SO |
2823 | u8 max_num_pmkids; |
2824 | ||
7f531e03 BR |
2825 | u32 available_antennas_tx; |
2826 | u32 available_antennas_rx; | |
a7ffac95 | 2827 | |
87bbbe22 AN |
2828 | /* |
2829 | * Bitmap of supported protocols for probe response offloading | |
2830 | * see &enum nl80211_probe_resp_offload_support_attr. Only valid | |
2831 | * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set. | |
2832 | */ | |
2833 | u32 probe_resp_offload; | |
2834 | ||
a50df0c4 JB |
2835 | const u8 *extended_capabilities, *extended_capabilities_mask; |
2836 | u8 extended_capabilities_len; | |
2837 | ||
d3236553 JB |
2838 | /* If multiple wiphys are registered and you're handed e.g. |
2839 | * a regular netdev with assigned ieee80211_ptr, you won't | |
2840 | * know whether it points to a wiphy your driver has registered | |
2841 | * or not. Assign this to something global to your driver to | |
2842 | * help determine whether you own this wiphy or not. */ | |
cf5aa2f1 | 2843 | const void *privid; |
d3236553 JB |
2844 | |
2845 | struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; | |
2846 | ||
2847 | /* Lets us get back the wiphy on the callback */ | |
0c0280bd LR |
2848 | void (*reg_notifier)(struct wiphy *wiphy, |
2849 | struct regulatory_request *request); | |
d3236553 JB |
2850 | |
2851 | /* fields below are read-only, assigned by cfg80211 */ | |
2852 | ||
458f4f9e | 2853 | const struct ieee80211_regdomain __rcu *regd; |
d3236553 JB |
2854 | |
2855 | /* the item in /sys/class/ieee80211/ points to this, | |
2856 | * you need use set_wiphy_dev() (see below) */ | |
2857 | struct device dev; | |
2858 | ||
ecb44335 SG |
2859 | /* protects ->resume, ->suspend sysfs callbacks against unregister hw */ |
2860 | bool registered; | |
2861 | ||
d3236553 JB |
2862 | /* dir in debugfs: ieee80211/<wiphyname> */ |
2863 | struct dentry *debugfsdir; | |
2864 | ||
7e7c8926 | 2865 | const struct ieee80211_ht_cap *ht_capa_mod_mask; |
ee2aca34 | 2866 | const struct ieee80211_vht_cap *vht_capa_mod_mask; |
7e7c8926 | 2867 | |
463d0183 JB |
2868 | #ifdef CONFIG_NET_NS |
2869 | /* the network namespace this phy lives in currently */ | |
2870 | struct net *_net; | |
2871 | #endif | |
2872 | ||
3d23e349 JB |
2873 | #ifdef CONFIG_CFG80211_WEXT |
2874 | const struct iw_handler_def *wext; | |
2875 | #endif | |
2876 | ||
be29b99a AK |
2877 | const struct wiphy_coalesce_support *coalesce; |
2878 | ||
1c06ef98 | 2879 | char priv[0] __aligned(NETDEV_ALIGN); |
d3236553 JB |
2880 | }; |
2881 | ||
463d0183 JB |
2882 | static inline struct net *wiphy_net(struct wiphy *wiphy) |
2883 | { | |
c2d9ba9b | 2884 | return read_pnet(&wiphy->_net); |
463d0183 JB |
2885 | } |
2886 | ||
2887 | static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) | |
2888 | { | |
c2d9ba9b | 2889 | write_pnet(&wiphy->_net, net); |
463d0183 | 2890 | } |
463d0183 | 2891 | |
d3236553 JB |
2892 | /** |
2893 | * wiphy_priv - return priv from wiphy | |
2894 | * | |
2895 | * @wiphy: the wiphy whose priv pointer to return | |
0ae997dc | 2896 | * Return: The priv of @wiphy. |
d3236553 JB |
2897 | */ |
2898 | static inline void *wiphy_priv(struct wiphy *wiphy) | |
2899 | { | |
2900 | BUG_ON(!wiphy); | |
2901 | return &wiphy->priv; | |
2902 | } | |
2903 | ||
f1f74825 DK |
2904 | /** |
2905 | * priv_to_wiphy - return the wiphy containing the priv | |
2906 | * | |
2907 | * @priv: a pointer previously returned by wiphy_priv | |
0ae997dc | 2908 | * Return: The wiphy of @priv. |
f1f74825 DK |
2909 | */ |
2910 | static inline struct wiphy *priv_to_wiphy(void *priv) | |
2911 | { | |
2912 | BUG_ON(!priv); | |
2913 | return container_of(priv, struct wiphy, priv); | |
2914 | } | |
2915 | ||
d3236553 JB |
2916 | /** |
2917 | * set_wiphy_dev - set device pointer for wiphy | |
2918 | * | |
2919 | * @wiphy: The wiphy whose device to bind | |
2920 | * @dev: The device to parent it to | |
2921 | */ | |
2922 | static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) | |
2923 | { | |
2924 | wiphy->dev.parent = dev; | |
2925 | } | |
2926 | ||
2927 | /** | |
2928 | * wiphy_dev - get wiphy dev pointer | |
2929 | * | |
2930 | * @wiphy: The wiphy whose device struct to look up | |
0ae997dc | 2931 | * Return: The dev of @wiphy. |
d3236553 JB |
2932 | */ |
2933 | static inline struct device *wiphy_dev(struct wiphy *wiphy) | |
2934 | { | |
2935 | return wiphy->dev.parent; | |
2936 | } | |
2937 | ||
2938 | /** | |
2939 | * wiphy_name - get wiphy name | |
2940 | * | |
2941 | * @wiphy: The wiphy whose name to return | |
0ae997dc | 2942 | * Return: The name of @wiphy. |
d3236553 | 2943 | */ |
e1db74fc | 2944 | static inline const char *wiphy_name(const struct wiphy *wiphy) |
d3236553 JB |
2945 | { |
2946 | return dev_name(&wiphy->dev); | |
2947 | } | |
2948 | ||
2949 | /** | |
2950 | * wiphy_new - create a new wiphy for use with cfg80211 | |
2951 | * | |
2952 | * @ops: The configuration operations for this device | |
2953 | * @sizeof_priv: The size of the private area to allocate | |
2954 | * | |
2955 | * Create a new wiphy and associate the given operations with it. | |
2956 | * @sizeof_priv bytes are allocated for private use. | |
2957 | * | |
0ae997dc YB |
2958 | * Return: A pointer to the new wiphy. This pointer must be |
2959 | * assigned to each netdev's ieee80211_ptr for proper operation. | |
d3236553 | 2960 | */ |
3dcf670b | 2961 | struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); |
d3236553 JB |
2962 | |
2963 | /** | |
2964 | * wiphy_register - register a wiphy with cfg80211 | |
2965 | * | |
2966 | * @wiphy: The wiphy to register. | |
2967 | * | |
0ae997dc | 2968 | * Return: A non-negative wiphy index or a negative error code. |
d3236553 JB |
2969 | */ |
2970 | extern int wiphy_register(struct wiphy *wiphy); | |
2971 | ||
2972 | /** | |
2973 | * wiphy_unregister - deregister a wiphy from cfg80211 | |
2974 | * | |
2975 | * @wiphy: The wiphy to unregister. | |
2976 | * | |
2977 | * After this call, no more requests can be made with this priv | |
2978 | * pointer, but the call may sleep to wait for an outstanding | |
2979 | * request that is being handled. | |
2980 | */ | |
2981 | extern void wiphy_unregister(struct wiphy *wiphy); | |
2982 | ||
2983 | /** | |
2984 | * wiphy_free - free wiphy | |
2985 | * | |
2986 | * @wiphy: The wiphy to free | |
2987 | */ | |
2988 | extern void wiphy_free(struct wiphy *wiphy); | |
2989 | ||
fffd0934 | 2990 | /* internal structs */ |
6829c878 | 2991 | struct cfg80211_conn; |
19957bb3 | 2992 | struct cfg80211_internal_bss; |
fffd0934 | 2993 | struct cfg80211_cached_keys; |
19957bb3 | 2994 | |
d3236553 | 2995 | /** |
89a54e48 | 2996 | * struct wireless_dev - wireless device state |
d3236553 | 2997 | * |
89a54e48 JB |
2998 | * For netdevs, this structure must be allocated by the driver |
2999 | * that uses the ieee80211_ptr field in struct net_device (this | |
3000 | * is intentional so it can be allocated along with the netdev.) | |
3001 | * It need not be registered then as netdev registration will | |
3002 | * be intercepted by cfg80211 to see the new wireless device. | |
3003 | * | |
3004 | * For non-netdev uses, it must also be allocated by the driver | |
3005 | * in response to the cfg80211 callbacks that require it, as | |
3006 | * there's no netdev registration in that case it may not be | |
3007 | * allocated outside of callback operations that return it. | |
d3236553 JB |
3008 | * |
3009 | * @wiphy: pointer to hardware description | |
3010 | * @iftype: interface type | |
3011 | * @list: (private) Used to collect the interfaces | |
89a54e48 JB |
3012 | * @netdev: (private) Used to reference back to the netdev, may be %NULL |
3013 | * @identifier: (private) Identifier used in nl80211 to identify this | |
3014 | * wireless device if it has no netdev | |
d3236553 | 3015 | * @current_bss: (private) Used by the internal configuration code |
f444de05 | 3016 | * @channel: (private) Used by the internal configuration code to track |
aa430da4 | 3017 | * the user-set AP, monitor and WDS channel |
780b40df | 3018 | * @preset_chandef: (private) Used by the internal configuration code to |
aa430da4 | 3019 | * track the channel to be used for AP later |
d3236553 JB |
3020 | * @bssid: (private) Used by the internal configuration code |
3021 | * @ssid: (private) Used by the internal configuration code | |
3022 | * @ssid_len: (private) Used by the internal configuration code | |
29cbe68c JB |
3023 | * @mesh_id_len: (private) Used by the internal configuration code |
3024 | * @mesh_id_up_len: (private) Used by the internal configuration code | |
d3236553 | 3025 | * @wext: (private) Used by the internal wireless extensions compat code |
9bc383de JB |
3026 | * @use_4addr: indicates 4addr mode is used on this interface, must be |
3027 | * set by driver (if supported) on add_interface BEFORE registering the | |
3028 | * netdev and may otherwise be used by driver read-only, will be update | |
3029 | * by cfg80211 on change_interface | |
2e161f78 JB |
3030 | * @mgmt_registrations: list of registrations for management frames |
3031 | * @mgmt_registrations_lock: lock for the list | |
8d61ffa5 JB |
3032 | * @mtx: mutex used to lock data in this struct, may be used by drivers |
3033 | * and some API functions require it held | |
56d1893d JB |
3034 | * @beacon_interval: beacon interval used on this device for transmitting |
3035 | * beacons, 0 when not valid | |
98104fde JB |
3036 | * @address: The address for this device, valid only if @netdev is %NULL |
3037 | * @p2p_started: true if this is a P2P Device that has been started | |
04f39047 SW |
3038 | * @cac_started: true if DFS channel availability check has been started |
3039 | * @cac_start_time: timestamp (jiffies) when the dfs state was entered. | |
780b40df JB |
3040 | * @ps: powersave mode is enabled |
3041 | * @ps_timeout: dynamic powersave timeout | |
3042 | * @ap_unexpected_nlportid: (private) netlink port ID of application | |
3043 | * registered for unexpected class 3 frames (AP mode) | |
3044 | * @conn: (private) cfg80211 software SME connection state machine data | |
3045 | * @connect_keys: (private) keys to set after connection is established | |
3046 | * @ibss_fixed: (private) IBSS is using fixed BSSID | |
3047 | * @event_list: (private) list for internal event processing | |
3048 | * @event_lock: (private) lock for event list | |
d3236553 JB |
3049 | */ |
3050 | struct wireless_dev { | |
3051 | struct wiphy *wiphy; | |
3052 | enum nl80211_iftype iftype; | |
3053 | ||
667503dd | 3054 | /* the remainder of this struct should be private to cfg80211 */ |
d3236553 JB |
3055 | struct list_head list; |
3056 | struct net_device *netdev; | |
3057 | ||
89a54e48 JB |
3058 | u32 identifier; |
3059 | ||
2e161f78 JB |
3060 | struct list_head mgmt_registrations; |
3061 | spinlock_t mgmt_registrations_lock; | |
026331c4 | 3062 | |
667503dd JB |
3063 | struct mutex mtx; |
3064 | ||
98104fde JB |
3065 | bool use_4addr, p2p_started; |
3066 | ||
3067 | u8 address[ETH_ALEN] __aligned(sizeof(u16)); | |
9bc383de | 3068 | |
b23aa676 | 3069 | /* currently used for IBSS and SME - might be rearranged later */ |
d3236553 | 3070 | u8 ssid[IEEE80211_MAX_SSID_LEN]; |
29cbe68c | 3071 | u8 ssid_len, mesh_id_len, mesh_id_up_len; |
6829c878 | 3072 | struct cfg80211_conn *conn; |
fffd0934 | 3073 | struct cfg80211_cached_keys *connect_keys; |
d3236553 | 3074 | |
667503dd JB |
3075 | struct list_head event_list; |
3076 | spinlock_t event_lock; | |
3077 | ||
19957bb3 | 3078 | struct cfg80211_internal_bss *current_bss; /* associated / joined */ |
683b6d3b | 3079 | struct cfg80211_chan_def preset_chandef; |
19957bb3 | 3080 | |
f4489ebe MK |
3081 | /* for AP and mesh channel tracking */ |
3082 | struct ieee80211_channel *channel; | |
3083 | ||
c30a3d38 MK |
3084 | bool ibss_fixed; |
3085 | ||
ffb9eb3d KV |
3086 | bool ps; |
3087 | int ps_timeout; | |
3088 | ||
56d1893d JB |
3089 | int beacon_interval; |
3090 | ||
15e47304 | 3091 | u32 ap_unexpected_nlportid; |
28946da7 | 3092 | |
04f39047 SW |
3093 | bool cac_started; |
3094 | unsigned long cac_start_time; | |
3095 | ||
3d23e349 | 3096 | #ifdef CONFIG_CFG80211_WEXT |
d3236553 | 3097 | /* wext data */ |
cbe8fa9c | 3098 | struct { |
c238c8ac JB |
3099 | struct cfg80211_ibss_params ibss; |
3100 | struct cfg80211_connect_params connect; | |
fffd0934 | 3101 | struct cfg80211_cached_keys *keys; |
f2129354 JB |
3102 | u8 *ie; |
3103 | size_t ie_len; | |
f401a6f7 | 3104 | u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; |
f2129354 | 3105 | u8 ssid[IEEE80211_MAX_SSID_LEN]; |
08645126 | 3106 | s8 default_key, default_mgmt_key; |
ffb9eb3d | 3107 | bool prev_bssid_valid; |
cbe8fa9c | 3108 | } wext; |
d3236553 JB |
3109 | #endif |
3110 | }; | |
3111 | ||
98104fde JB |
3112 | static inline u8 *wdev_address(struct wireless_dev *wdev) |
3113 | { | |
3114 | if (wdev->netdev) | |
3115 | return wdev->netdev->dev_addr; | |
3116 | return wdev->address; | |
3117 | } | |
3118 | ||
d3236553 JB |
3119 | /** |
3120 | * wdev_priv - return wiphy priv from wireless_dev | |
3121 | * | |
3122 | * @wdev: The wireless device whose wiphy's priv pointer to return | |
0ae997dc | 3123 | * Return: The wiphy priv of @wdev. |
d3236553 JB |
3124 | */ |
3125 | static inline void *wdev_priv(struct wireless_dev *wdev) | |
3126 | { | |
3127 | BUG_ON(!wdev); | |
3128 | return wiphy_priv(wdev->wiphy); | |
3129 | } | |
3130 | ||
d70e9693 JB |
3131 | /** |
3132 | * DOC: Utility functions | |
3133 | * | |
3134 | * cfg80211 offers a number of utility functions that can be useful. | |
d3236553 JB |
3135 | */ |
3136 | ||
3137 | /** | |
3138 | * ieee80211_channel_to_frequency - convert channel number to frequency | |
abe37c4b | 3139 | * @chan: channel number |
59eb21a6 | 3140 | * @band: band, necessary due to channel number overlap |
0ae997dc | 3141 | * Return: The corresponding frequency (in MHz), or 0 if the conversion failed. |
d3236553 | 3142 | */ |
59eb21a6 | 3143 | extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band); |
d3236553 JB |
3144 | |
3145 | /** | |
3146 | * ieee80211_frequency_to_channel - convert frequency to channel number | |
abe37c4b | 3147 | * @freq: center frequency |
0ae997dc | 3148 | * Return: The corresponding channel, or 0 if the conversion failed. |
d3236553 JB |
3149 | */ |
3150 | extern int ieee80211_frequency_to_channel(int freq); | |
3151 | ||
3152 | /* | |
3153 | * Name indirection necessary because the ieee80211 code also has | |
3154 | * a function named "ieee80211_get_channel", so if you include | |
3155 | * cfg80211's header file you get cfg80211's version, if you try | |
3156 | * to include both header files you'll (rightfully!) get a symbol | |
3157 | * clash. | |
3158 | */ | |
3159 | extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, | |
3160 | int freq); | |
3161 | /** | |
3162 | * ieee80211_get_channel - get channel struct from wiphy for specified frequency | |
abe37c4b JB |
3163 | * @wiphy: the struct wiphy to get the channel for |
3164 | * @freq: the center frequency of the channel | |
0ae997dc | 3165 | * Return: The channel struct from @wiphy at @freq. |
d3236553 JB |
3166 | */ |
3167 | static inline struct ieee80211_channel * | |
3168 | ieee80211_get_channel(struct wiphy *wiphy, int freq) | |
3169 | { | |
3170 | return __ieee80211_get_channel(wiphy, freq); | |
3171 | } | |
3172 | ||
3173 | /** | |
3174 | * ieee80211_get_response_rate - get basic rate for a given rate | |
3175 | * | |
3176 | * @sband: the band to look for rates in | |
3177 | * @basic_rates: bitmap of basic rates | |
3178 | * @bitrate: the bitrate for which to find the basic rate | |
3179 | * | |
0ae997dc YB |
3180 | * Return: The basic rate corresponding to a given bitrate, that |
3181 | * is the next lower bitrate contained in the basic rate map, | |
3182 | * which is, for this function, given as a bitmap of indices of | |
3183 | * rates in the band's bitrate table. | |
d3236553 JB |
3184 | */ |
3185 | struct ieee80211_rate * | |
3186 | ieee80211_get_response_rate(struct ieee80211_supported_band *sband, | |
3187 | u32 basic_rates, int bitrate); | |
3188 | ||
b422c6cd AN |
3189 | /** |
3190 | * ieee80211_mandatory_rates - get mandatory rates for a given band | |
3191 | * @sband: the band to look for rates in | |
74608aca | 3192 | * @scan_width: width of the control channel |
b422c6cd AN |
3193 | * |
3194 | * This function returns a bitmap of the mandatory rates for the given | |
3195 | * band, bits are set according to the rate position in the bitrates array. | |
3196 | */ | |
74608aca SW |
3197 | u32 ieee80211_mandatory_rates(struct ieee80211_supported_band *sband, |
3198 | enum nl80211_bss_scan_width scan_width); | |
b422c6cd | 3199 | |
d3236553 JB |
3200 | /* |
3201 | * Radiotap parsing functions -- for controlled injection support | |
3202 | * | |
3203 | * Implemented in net/wireless/radiotap.c | |
3204 | * Documentation in Documentation/networking/radiotap-headers.txt | |
3205 | */ | |
3206 | ||
33e5a2f7 JB |
3207 | struct radiotap_align_size { |
3208 | uint8_t align:4, size:4; | |
3209 | }; | |
3210 | ||
3211 | struct ieee80211_radiotap_namespace { | |
3212 | const struct radiotap_align_size *align_size; | |
3213 | int n_bits; | |
3214 | uint32_t oui; | |
3215 | uint8_t subns; | |
3216 | }; | |
3217 | ||
3218 | struct ieee80211_radiotap_vendor_namespaces { | |
3219 | const struct ieee80211_radiotap_namespace *ns; | |
3220 | int n_ns; | |
3221 | }; | |
3222 | ||
d3236553 JB |
3223 | /** |
3224 | * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args | |
33e5a2f7 JB |
3225 | * @this_arg_index: index of current arg, valid after each successful call |
3226 | * to ieee80211_radiotap_iterator_next() | |
3227 | * @this_arg: pointer to current radiotap arg; it is valid after each | |
3228 | * call to ieee80211_radiotap_iterator_next() but also after | |
3229 | * ieee80211_radiotap_iterator_init() where it will point to | |
3230 | * the beginning of the actual data portion | |
3231 | * @this_arg_size: length of the current arg, for convenience | |
3232 | * @current_namespace: pointer to the current namespace definition | |
3233 | * (or internally %NULL if the current namespace is unknown) | |
3234 | * @is_radiotap_ns: indicates whether the current namespace is the default | |
3235 | * radiotap namespace or not | |
3236 | * | |
33e5a2f7 JB |
3237 | * @_rtheader: pointer to the radiotap header we are walking through |
3238 | * @_max_length: length of radiotap header in cpu byte ordering | |
3239 | * @_arg_index: next argument index | |
3240 | * @_arg: next argument pointer | |
3241 | * @_next_bitmap: internal pointer to next present u32 | |
3242 | * @_bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present | |
3243 | * @_vns: vendor namespace definitions | |
3244 | * @_next_ns_data: beginning of the next namespace's data | |
3245 | * @_reset_on_ext: internal; reset the arg index to 0 when going to the | |
3246 | * next bitmap word | |
3247 | * | |
3248 | * Describes the radiotap parser state. Fields prefixed with an underscore | |
3249 | * must not be used by users of the parser, only by the parser internally. | |
d3236553 JB |
3250 | */ |
3251 | ||
3252 | struct ieee80211_radiotap_iterator { | |
33e5a2f7 JB |
3253 | struct ieee80211_radiotap_header *_rtheader; |
3254 | const struct ieee80211_radiotap_vendor_namespaces *_vns; | |
3255 | const struct ieee80211_radiotap_namespace *current_namespace; | |
3256 | ||
3257 | unsigned char *_arg, *_next_ns_data; | |
67272440 | 3258 | __le32 *_next_bitmap; |
33e5a2f7 JB |
3259 | |
3260 | unsigned char *this_arg; | |
d3236553 | 3261 | int this_arg_index; |
33e5a2f7 | 3262 | int this_arg_size; |
d3236553 | 3263 | |
33e5a2f7 JB |
3264 | int is_radiotap_ns; |
3265 | ||
3266 | int _max_length; | |
3267 | int _arg_index; | |
3268 | uint32_t _bitmap_shifter; | |
3269 | int _reset_on_ext; | |
d3236553 JB |
3270 | }; |
3271 | ||
3272 | extern int ieee80211_radiotap_iterator_init( | |
33e5a2f7 JB |
3273 | struct ieee80211_radiotap_iterator *iterator, |
3274 | struct ieee80211_radiotap_header *radiotap_header, | |
3275 | int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns); | |
d3236553 JB |
3276 | |
3277 | extern int ieee80211_radiotap_iterator_next( | |
33e5a2f7 JB |
3278 | struct ieee80211_radiotap_iterator *iterator); |
3279 | ||
d3236553 | 3280 | |
e31a16d6 ZY |
3281 | extern const unsigned char rfc1042_header[6]; |
3282 | extern const unsigned char bridge_tunnel_header[6]; | |
3283 | ||
3284 | /** | |
3285 | * ieee80211_get_hdrlen_from_skb - get header length from data | |
3286 | * | |
0ae997dc YB |
3287 | * @skb: the frame |
3288 | * | |
e31a16d6 | 3289 | * Given an skb with a raw 802.11 header at the data pointer this function |
0ae997dc | 3290 | * returns the 802.11 header length. |
e31a16d6 | 3291 | * |
0ae997dc YB |
3292 | * Return: The 802.11 header length in bytes (not including encryption |
3293 | * headers). Or 0 if the data in the sk_buff is too short to contain a valid | |
3294 | * 802.11 header. | |
e31a16d6 ZY |
3295 | */ |
3296 | unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); | |
3297 | ||
3298 | /** | |
3299 | * ieee80211_hdrlen - get header length in bytes from frame control | |
3300 | * @fc: frame control field in little-endian format | |
0ae997dc | 3301 | * Return: The header length in bytes. |
e31a16d6 | 3302 | */ |
633adf1a | 3303 | unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); |
e31a16d6 | 3304 | |
9b395bc3 JB |
3305 | /** |
3306 | * ieee80211_get_mesh_hdrlen - get mesh extension header length | |
3307 | * @meshhdr: the mesh extension header, only the flags field | |
3308 | * (first byte) will be accessed | |
0ae997dc | 3309 | * Return: The length of the extension header, which is always at |
9b395bc3 JB |
3310 | * least 6 bytes and at most 18 if address 5 and 6 are present. |
3311 | */ | |
3312 | unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); | |
3313 | ||
d70e9693 JB |
3314 | /** |
3315 | * DOC: Data path helpers | |
3316 | * | |
3317 | * In addition to generic utilities, cfg80211 also offers | |
3318 | * functions that help implement the data path for devices | |
3319 | * that do not do the 802.11/802.3 conversion on the device. | |
3320 | */ | |
3321 | ||
e31a16d6 ZY |
3322 | /** |
3323 | * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3 | |
3324 | * @skb: the 802.11 data frame | |
3325 | * @addr: the device MAC address | |
3326 | * @iftype: the virtual interface type | |
0ae997dc | 3327 | * Return: 0 on success. Non-zero on error. |
e31a16d6 | 3328 | */ |
eaf85ca7 | 3329 | int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, |
e31a16d6 ZY |
3330 | enum nl80211_iftype iftype); |
3331 | ||
3332 | /** | |
3333 | * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11 | |
3334 | * @skb: the 802.3 frame | |
3335 | * @addr: the device MAC address | |
3336 | * @iftype: the virtual interface type | |
3337 | * @bssid: the network bssid (used only for iftype STATION and ADHOC) | |
3338 | * @qos: build 802.11 QoS data frame | |
0ae997dc | 3339 | * Return: 0 on success, or a negative error code. |
e31a16d6 | 3340 | */ |
eaf85ca7 | 3341 | int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, |
e31a16d6 ZY |
3342 | enum nl80211_iftype iftype, u8 *bssid, bool qos); |
3343 | ||
eaf85ca7 ZY |
3344 | /** |
3345 | * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame | |
3346 | * | |
3347 | * Decode an IEEE 802.11n A-MSDU frame and convert it to a list of | |
3348 | * 802.3 frames. The @list will be empty if the decode fails. The | |
3349 | * @skb is consumed after the function returns. | |
3350 | * | |
3351 | * @skb: The input IEEE 802.11n A-MSDU frame. | |
3352 | * @list: The output list of 802.3 frames. It must be allocated and | |
3353 | * initialized by by the caller. | |
3354 | * @addr: The device MAC address. | |
3355 | * @iftype: The device interface type. | |
3356 | * @extra_headroom: The hardware extra headroom for SKBs in the @list. | |
8b3becad | 3357 | * @has_80211_header: Set it true if SKB is with IEEE 802.11 header. |
eaf85ca7 ZY |
3358 | */ |
3359 | void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, | |
3360 | const u8 *addr, enum nl80211_iftype iftype, | |
8b3becad YAP |
3361 | const unsigned int extra_headroom, |
3362 | bool has_80211_header); | |
eaf85ca7 | 3363 | |
e31a16d6 ZY |
3364 | /** |
3365 | * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame | |
3366 | * @skb: the data frame | |
0ae997dc | 3367 | * Return: The 802.1p/1d tag. |
e31a16d6 ZY |
3368 | */ |
3369 | unsigned int cfg80211_classify8021d(struct sk_buff *skb); | |
3370 | ||
c21dbf92 JB |
3371 | /** |
3372 | * cfg80211_find_ie - find information element in data | |
3373 | * | |
3374 | * @eid: element ID | |
3375 | * @ies: data consisting of IEs | |
3376 | * @len: length of data | |
3377 | * | |
0ae997dc YB |
3378 | * Return: %NULL if the element ID could not be found or if |
3379 | * the element is invalid (claims to be longer than the given | |
3380 | * data), or a pointer to the first byte of the requested | |
3381 | * element, that is the byte containing the element ID. | |
3382 | * | |
3383 | * Note: There are no checks on the element length other than | |
3384 | * having to fit into the given data. | |
c21dbf92 JB |
3385 | */ |
3386 | const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); | |
3387 | ||
0c28ec58 EP |
3388 | /** |
3389 | * cfg80211_find_vendor_ie - find vendor specific information element in data | |
3390 | * | |
3391 | * @oui: vendor OUI | |
3392 | * @oui_type: vendor-specific OUI type | |
3393 | * @ies: data consisting of IEs | |
3394 | * @len: length of data | |
3395 | * | |
0ae997dc YB |
3396 | * Return: %NULL if the vendor specific element ID could not be found or if the |
3397 | * element is invalid (claims to be longer than the given data), or a pointer to | |
3398 | * the first byte of the requested element, that is the byte containing the | |
3399 | * element ID. | |
3400 | * | |
3401 | * Note: There are no checks on the element length other than having to fit into | |
3402 | * the given data. | |
0c28ec58 EP |
3403 | */ |
3404 | const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, | |
3405 | const u8 *ies, int len); | |
3406 | ||
d70e9693 JB |
3407 | /** |
3408 | * DOC: Regulatory enforcement infrastructure | |
3409 | * | |
3410 | * TODO | |
d3236553 JB |
3411 | */ |
3412 | ||
3413 | /** | |
3414 | * regulatory_hint - driver hint to the wireless core a regulatory domain | |
3415 | * @wiphy: the wireless device giving the hint (used only for reporting | |
3416 | * conflicts) | |
3417 | * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain | |
3418 | * should be in. If @rd is set this should be NULL. Note that if you | |
3419 | * set this to NULL you should still set rd->alpha2 to some accepted | |
3420 | * alpha2. | |
3421 | * | |
3422 | * Wireless drivers can use this function to hint to the wireless core | |
3423 | * what it believes should be the current regulatory domain by | |
3424 | * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory | |
3425 | * domain should be in or by providing a completely build regulatory domain. | |
3426 | * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried | |
3427 | * for a regulatory domain structure for the respective country. | |
3428 | * | |
3429 | * The wiphy must have been registered to cfg80211 prior to this call. | |
3430 | * For cfg80211 drivers this means you must first use wiphy_register(), | |
3431 | * for mac80211 drivers you must first use ieee80211_register_hw(). | |
3432 | * | |
3433 | * Drivers should check the return value, its possible you can get | |
3434 | * an -ENOMEM. | |
0ae997dc YB |
3435 | * |
3436 | * Return: 0 on success. -ENOMEM. | |
d3236553 JB |
3437 | */ |
3438 | extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); | |
3439 | ||
d3236553 JB |
3440 | /** |
3441 | * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain | |
3442 | * @wiphy: the wireless device we want to process the regulatory domain on | |
3443 | * @regd: the custom regulatory domain to use for this wiphy | |
3444 | * | |
3445 | * Drivers can sometimes have custom regulatory domains which do not apply | |
3446 | * to a specific country. Drivers can use this to apply such custom regulatory | |
3447 | * domains. This routine must be called prior to wiphy registration. The | |
3448 | * custom regulatory domain will be trusted completely and as such previous | |
3449 | * default channel settings will be disregarded. If no rule is found for a | |
3450 | * channel on the regulatory domain the channel will be disabled. | |
3451 | */ | |
3452 | extern void wiphy_apply_custom_regulatory( | |
3453 | struct wiphy *wiphy, | |
3454 | const struct ieee80211_regdomain *regd); | |
3455 | ||
3456 | /** | |
3457 | * freq_reg_info - get regulatory information for the given frequency | |
3458 | * @wiphy: the wiphy for which we want to process this rule for | |
3459 | * @center_freq: Frequency in KHz for which we want regulatory information for | |
d3236553 JB |
3460 | * |
3461 | * Use this function to get the regulatory rule for a specific frequency on | |
3462 | * a given wireless device. If the device has a specific regulatory domain | |
3463 | * it wants to follow we respect that unless a country IE has been received | |
3464 | * and processed already. | |
3465 | * | |
0ae997dc YB |
3466 | * Return: A valid pointer, or, when an error occurs, for example if no rule |
3467 | * can be found, the return value is encoded using ERR_PTR(). Use IS_ERR() to | |
3468 | * check and PTR_ERR() to obtain the numeric return value. The numeric return | |
3469 | * value will be -ERANGE if we determine the given center_freq does not even | |
3470 | * have a regulatory rule for a frequency range in the center_freq's band. | |
3471 | * See freq_in_rule_band() for our current definition of a band -- this is | |
3472 | * purely subjective and right now it's 802.11 specific. | |
d3236553 | 3473 | */ |
361c9c8b JB |
3474 | const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, |
3475 | u32 center_freq); | |
d3236553 | 3476 | |
d3236553 JB |
3477 | /* |
3478 | * callbacks for asynchronous cfg80211 methods, notification | |
3479 | * functions and BSS handling helpers | |
3480 | */ | |
3481 | ||
2a519311 JB |
3482 | /** |
3483 | * cfg80211_scan_done - notify that scan finished | |
3484 | * | |
3485 | * @request: the corresponding scan request | |
3486 | * @aborted: set to true if the scan was aborted for any reason, | |
3487 | * userspace will be notified of that | |
3488 | */ | |
3489 | void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted); | |
3490 | ||
807f8a8c LC |
3491 | /** |
3492 | * cfg80211_sched_scan_results - notify that new scan results are available | |
3493 | * | |
3494 | * @wiphy: the wiphy which got scheduled scan results | |
3495 | */ | |
3496 | void cfg80211_sched_scan_results(struct wiphy *wiphy); | |
3497 | ||
3498 | /** | |
3499 | * cfg80211_sched_scan_stopped - notify that the scheduled scan has stopped | |
3500 | * | |
3501 | * @wiphy: the wiphy on which the scheduled scan stopped | |
3502 | * | |
3503 | * The driver can call this function to inform cfg80211 that the | |
3504 | * scheduled scan had to be stopped, for whatever reason. The driver | |
3505 | * is then called back via the sched_scan_stop operation when done. | |
3506 | */ | |
3507 | void cfg80211_sched_scan_stopped(struct wiphy *wiphy); | |
3508 | ||
2a519311 | 3509 | /** |
dcd6eac1 | 3510 | * cfg80211_inform_bss_width_frame - inform cfg80211 of a received BSS frame |
2a519311 JB |
3511 | * |
3512 | * @wiphy: the wiphy reporting the BSS | |
abe37c4b | 3513 | * @channel: The channel the frame was received on |
dcd6eac1 | 3514 | * @scan_width: width of the control channel |
abe37c4b JB |
3515 | * @mgmt: the management frame (probe response or beacon) |
3516 | * @len: length of the management frame | |
77965c97 | 3517 | * @signal: the signal strength, type depends on the wiphy's signal_type |
2a519311 JB |
3518 | * @gfp: context flags |
3519 | * | |
3520 | * This informs cfg80211 that BSS information was found and | |
3521 | * the BSS should be updated/added. | |
ef100682 | 3522 | * |
0ae997dc YB |
3523 | * Return: A referenced struct, must be released with cfg80211_put_bss()! |
3524 | * Or %NULL on error. | |
2a519311 | 3525 | */ |
ef100682 | 3526 | struct cfg80211_bss * __must_check |
dcd6eac1 SW |
3527 | cfg80211_inform_bss_width_frame(struct wiphy *wiphy, |
3528 | struct ieee80211_channel *channel, | |
3529 | enum nl80211_bss_scan_width scan_width, | |
3530 | struct ieee80211_mgmt *mgmt, size_t len, | |
3531 | s32 signal, gfp_t gfp); | |
3532 | ||
3533 | static inline struct cfg80211_bss * __must_check | |
2a519311 JB |
3534 | cfg80211_inform_bss_frame(struct wiphy *wiphy, |
3535 | struct ieee80211_channel *channel, | |
3536 | struct ieee80211_mgmt *mgmt, size_t len, | |
dcd6eac1 SW |
3537 | s32 signal, gfp_t gfp) |
3538 | { | |
3539 | return cfg80211_inform_bss_width_frame(wiphy, channel, | |
3540 | NL80211_BSS_CHAN_WIDTH_20, | |
3541 | mgmt, len, signal, gfp); | |
3542 | } | |
2a519311 | 3543 | |
abe37c4b JB |
3544 | /** |
3545 | * cfg80211_inform_bss - inform cfg80211 of a new BSS | |
3546 | * | |
3547 | * @wiphy: the wiphy reporting the BSS | |
3548 | * @channel: The channel the frame was received on | |
dcd6eac1 | 3549 | * @scan_width: width of the control channel |
abe37c4b | 3550 | * @bssid: the BSSID of the BSS |
7b8bcff2 | 3551 | * @tsf: the TSF sent by the peer in the beacon/probe response (or 0) |
abe37c4b JB |
3552 | * @capability: the capability field sent by the peer |
3553 | * @beacon_interval: the beacon interval announced by the peer | |
3554 | * @ie: additional IEs sent by the peer | |
3555 | * @ielen: length of the additional IEs | |
3556 | * @signal: the signal strength, type depends on the wiphy's signal_type | |
3557 | * @gfp: context flags | |
3558 | * | |
3559 | * This informs cfg80211 that BSS information was found and | |
3560 | * the BSS should be updated/added. | |
ef100682 | 3561 | * |
0ae997dc YB |
3562 | * Return: A referenced struct, must be released with cfg80211_put_bss()! |
3563 | * Or %NULL on error. | |
abe37c4b | 3564 | */ |
ef100682 | 3565 | struct cfg80211_bss * __must_check |
dcd6eac1 SW |
3566 | cfg80211_inform_bss_width(struct wiphy *wiphy, |
3567 | struct ieee80211_channel *channel, | |
3568 | enum nl80211_bss_scan_width scan_width, | |
3569 | const u8 *bssid, u64 tsf, u16 capability, | |
3570 | u16 beacon_interval, const u8 *ie, size_t ielen, | |
3571 | s32 signal, gfp_t gfp); | |
3572 | ||
3573 | static inline struct cfg80211_bss * __must_check | |
06aa7afa JK |
3574 | cfg80211_inform_bss(struct wiphy *wiphy, |
3575 | struct ieee80211_channel *channel, | |
7b8bcff2 JB |
3576 | const u8 *bssid, u64 tsf, u16 capability, |
3577 | u16 beacon_interval, const u8 *ie, size_t ielen, | |
dcd6eac1 SW |
3578 | s32 signal, gfp_t gfp) |
3579 | { | |
3580 | return cfg80211_inform_bss_width(wiphy, channel, | |
3581 | NL80211_BSS_CHAN_WIDTH_20, | |
3582 | bssid, tsf, capability, | |
3583 | beacon_interval, ie, ielen, signal, | |
3584 | gfp); | |
3585 | } | |
06aa7afa | 3586 | |
2a519311 JB |
3587 | struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, |
3588 | struct ieee80211_channel *channel, | |
3589 | const u8 *bssid, | |
79420f09 JB |
3590 | const u8 *ssid, size_t ssid_len, |
3591 | u16 capa_mask, u16 capa_val); | |
3592 | static inline struct cfg80211_bss * | |
3593 | cfg80211_get_ibss(struct wiphy *wiphy, | |
3594 | struct ieee80211_channel *channel, | |
3595 | const u8 *ssid, size_t ssid_len) | |
3596 | { | |
3597 | return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len, | |
3598 | WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); | |
3599 | } | |
3600 | ||
4c0c0b75 JB |
3601 | /** |
3602 | * cfg80211_ref_bss - reference BSS struct | |
5b112d3d | 3603 | * @wiphy: the wiphy this BSS struct belongs to |
4c0c0b75 JB |
3604 | * @bss: the BSS struct to reference |
3605 | * | |
3606 | * Increments the refcount of the given BSS struct. | |
3607 | */ | |
5b112d3d | 3608 | void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); |
4c0c0b75 JB |
3609 | |
3610 | /** | |
3611 | * cfg80211_put_bss - unref BSS struct | |
5b112d3d | 3612 | * @wiphy: the wiphy this BSS struct belongs to |
4c0c0b75 JB |
3613 | * @bss: the BSS struct |
3614 | * | |
3615 | * Decrements the refcount of the given BSS struct. | |
3616 | */ | |
5b112d3d | 3617 | void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); |
d3236553 | 3618 | |
d491af19 JB |
3619 | /** |
3620 | * cfg80211_unlink_bss - unlink BSS from internal data structures | |
3621 | * @wiphy: the wiphy | |
3622 | * @bss: the bss to remove | |
3623 | * | |
3624 | * This function removes the given BSS from the internal data structures | |
3625 | * thereby making it no longer show up in scan results etc. Use this | |
3626 | * function when you detect a BSS is gone. Normally BSSes will also time | |
3627 | * out, so it is not necessary to use this function at all. | |
3628 | */ | |
3629 | void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); | |
fee52678 | 3630 | |
dcd6eac1 SW |
3631 | static inline enum nl80211_bss_scan_width |
3632 | cfg80211_chandef_to_scan_width(const struct cfg80211_chan_def *chandef) | |
3633 | { | |
3634 | switch (chandef->width) { | |
3635 | case NL80211_CHAN_WIDTH_5: | |
3636 | return NL80211_BSS_CHAN_WIDTH_5; | |
3637 | case NL80211_CHAN_WIDTH_10: | |
3638 | return NL80211_BSS_CHAN_WIDTH_10; | |
3639 | default: | |
3640 | return NL80211_BSS_CHAN_WIDTH_20; | |
3641 | } | |
3642 | } | |
3643 | ||
6039f6d2 | 3644 | /** |
6ff57cf8 | 3645 | * cfg80211_rx_mlme_mgmt - notification of processed MLME management frame |
6039f6d2 JM |
3646 | * @dev: network device |
3647 | * @buf: authentication frame (header + body) | |
3648 | * @len: length of the frame data | |
3649 | * | |
6ff57cf8 JB |
3650 | * This function is called whenever an authentication, disassociation or |
3651 | * deauthentication frame has been received and processed in station mode. | |
3652 | * After being asked to authenticate via cfg80211_ops::auth() the driver must | |
3653 | * call either this function or cfg80211_auth_timeout(). | |
3654 | * After being asked to associate via cfg80211_ops::assoc() the driver must | |
3655 | * call either this function or cfg80211_auth_timeout(). | |
3656 | * While connected, the driver must calls this for received and processed | |
3657 | * disassociation and deauthentication frames. If the frame couldn't be used | |
3658 | * because it was unprotected, the driver must call the function | |
3659 | * cfg80211_rx_unprot_mlme_mgmt() instead. | |
3660 | * | |
3661 | * This function may sleep. The caller must hold the corresponding wdev's mutex. | |
6039f6d2 | 3662 | */ |
6ff57cf8 | 3663 | void cfg80211_rx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len); |
6039f6d2 | 3664 | |
1965c853 | 3665 | /** |
6ff57cf8 | 3666 | * cfg80211_auth_timeout - notification of timed out authentication |
1965c853 JM |
3667 | * @dev: network device |
3668 | * @addr: The MAC address of the device with which the authentication timed out | |
cb0b4beb | 3669 | * |
8d61ffa5 JB |
3670 | * This function may sleep. The caller must hold the corresponding wdev's |
3671 | * mutex. | |
1965c853 | 3672 | */ |
6ff57cf8 | 3673 | void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); |
1965c853 | 3674 | |
6039f6d2 | 3675 | /** |
6ff57cf8 | 3676 | * cfg80211_rx_assoc_resp - notification of processed association response |
6039f6d2 | 3677 | * @dev: network device |
6ff57cf8 JB |
3678 | * @bss: the BSS that association was requested with, ownership of the pointer |
3679 | * moves to cfg80211 in this call | |
3680 | * @buf: authentication frame (header + body) | |
6039f6d2 JM |
3681 | * @len: length of the frame data |
3682 | * | |
6ff57cf8 JB |
3683 | * After being asked to associate via cfg80211_ops::assoc() the driver must |
3684 | * call either this function or cfg80211_auth_timeout(). | |
3685 | * | |
3686 | * This function may sleep. The caller must hold the corresponding wdev's mutex. | |
6039f6d2 | 3687 | */ |
6ff57cf8 JB |
3688 | void cfg80211_rx_assoc_resp(struct net_device *dev, |
3689 | struct cfg80211_bss *bss, | |
95de817b | 3690 | const u8 *buf, size_t len); |
6039f6d2 | 3691 | |
1965c853 | 3692 | /** |
6ff57cf8 | 3693 | * cfg80211_assoc_timeout - notification of timed out association |
1965c853 | 3694 | * @dev: network device |
959867fa | 3695 | * @bss: The BSS entry with which association timed out. |
cb0b4beb | 3696 | * |
8d61ffa5 | 3697 | * This function may sleep. The caller must hold the corresponding wdev's mutex. |
1965c853 | 3698 | */ |
959867fa | 3699 | void cfg80211_assoc_timeout(struct net_device *dev, struct cfg80211_bss *bss); |
1965c853 | 3700 | |
6039f6d2 | 3701 | /** |
6ff57cf8 | 3702 | * cfg80211_tx_mlme_mgmt - notification of transmitted deauth/disassoc frame |
6039f6d2 | 3703 | * @dev: network device |
6ff57cf8 | 3704 | * @buf: 802.11 frame (header + body) |
6039f6d2 JM |
3705 | * @len: length of the frame data |
3706 | * | |
3707 | * This function is called whenever deauthentication has been processed in | |
53b46b84 | 3708 | * station mode. This includes both received deauthentication frames and |
8d61ffa5 JB |
3709 | * locally generated ones. This function may sleep. The caller must hold the |
3710 | * corresponding wdev's mutex. | |
6039f6d2 | 3711 | */ |
6ff57cf8 | 3712 | void cfg80211_tx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len); |
ce470613 | 3713 | |
6039f6d2 | 3714 | /** |
6ff57cf8 | 3715 | * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame |
cf4e594e JM |
3716 | * @dev: network device |
3717 | * @buf: deauthentication frame (header + body) | |
3718 | * @len: length of the frame data | |
3719 | * | |
6ff57cf8 JB |
3720 | * This function is called whenever a received deauthentication or dissassoc |
3721 | * frame has been dropped in station mode because of MFP being used but the | |
cf4e594e JM |
3722 | * frame was not protected. This function may sleep. |
3723 | */ | |
6ff57cf8 JB |
3724 | void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev, |
3725 | const u8 *buf, size_t len); | |
cf4e594e | 3726 | |
a3b8b056 JM |
3727 | /** |
3728 | * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) | |
3729 | * @dev: network device | |
3730 | * @addr: The source MAC address of the frame | |
3731 | * @key_type: The key type that the received frame used | |
a66b98db | 3732 | * @key_id: Key identifier (0..3). Can be -1 if missing. |
a3b8b056 | 3733 | * @tsc: The TSC value of the frame that generated the MIC failure (6 octets) |
e6d6e342 | 3734 | * @gfp: allocation flags |
a3b8b056 JM |
3735 | * |
3736 | * This function is called whenever the local MAC detects a MIC failure in a | |
3737 | * received frame. This matches with MLME-MICHAELMICFAILURE.indication() | |
3738 | * primitive. | |
3739 | */ | |
3740 | void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, | |
3741 | enum nl80211_key_type key_type, int key_id, | |
e6d6e342 | 3742 | const u8 *tsc, gfp_t gfp); |
a3b8b056 | 3743 | |
04a773ad JB |
3744 | /** |
3745 | * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS | |
3746 | * | |
3747 | * @dev: network device | |
3748 | * @bssid: the BSSID of the IBSS joined | |
3749 | * @gfp: allocation flags | |
3750 | * | |
3751 | * This function notifies cfg80211 that the device joined an IBSS or | |
3752 | * switched to a different BSSID. Before this function can be called, | |
3753 | * either a beacon has to have been received from the IBSS, or one of | |
3754 | * the cfg80211_inform_bss{,_frame} functions must have been called | |
3755 | * with the locally generated beacon -- this guarantees that there is | |
3756 | * always a scan result for this IBSS. cfg80211 will handle the rest. | |
3757 | */ | |
3758 | void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp); | |
3759 | ||
c93b5e71 JC |
3760 | /** |
3761 | * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate | |
3762 | * | |
3763 | * @dev: network device | |
3764 | * @macaddr: the MAC address of the new candidate | |
3765 | * @ie: information elements advertised by the peer candidate | |
3766 | * @ie_len: lenght of the information elements buffer | |
3767 | * @gfp: allocation flags | |
3768 | * | |
3769 | * This function notifies cfg80211 that the mesh peer candidate has been | |
3770 | * detected, most likely via a beacon or, less likely, via a probe response. | |
3771 | * cfg80211 then sends a notification to userspace. | |
3772 | */ | |
3773 | void cfg80211_notify_new_peer_candidate(struct net_device *dev, | |
3774 | const u8 *macaddr, const u8 *ie, u8 ie_len, gfp_t gfp); | |
3775 | ||
d70e9693 JB |
3776 | /** |
3777 | * DOC: RFkill integration | |
3778 | * | |
3779 | * RFkill integration in cfg80211 is almost invisible to drivers, | |
3780 | * as cfg80211 automatically registers an rfkill instance for each | |
3781 | * wireless device it knows about. Soft kill is also translated | |
3782 | * into disconnecting and turning all interfaces off, drivers are | |
3783 | * expected to turn off the device when all interfaces are down. | |
3784 | * | |
3785 | * However, devices may have a hard RFkill line, in which case they | |
3786 | * also need to interact with the rfkill subsystem, via cfg80211. | |
3787 | * They can do this with a few helper functions documented here. | |
3788 | */ | |
3789 | ||
1f87f7d3 JB |
3790 | /** |
3791 | * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state | |
3792 | * @wiphy: the wiphy | |
3793 | * @blocked: block status | |
3794 | */ | |
3795 | void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked); | |
3796 | ||
3797 | /** | |
3798 | * wiphy_rfkill_start_polling - start polling rfkill | |
3799 | * @wiphy: the wiphy | |
3800 | */ | |
3801 | void wiphy_rfkill_start_polling(struct wiphy *wiphy); | |
3802 | ||
3803 | /** | |
3804 | * wiphy_rfkill_stop_polling - stop polling rfkill | |
3805 | * @wiphy: the wiphy | |
3806 | */ | |
3807 | void wiphy_rfkill_stop_polling(struct wiphy *wiphy); | |
3808 | ||
aff89a9b | 3809 | #ifdef CONFIG_NL80211_TESTMODE |
d70e9693 JB |
3810 | /** |
3811 | * DOC: Test mode | |
3812 | * | |
3813 | * Test mode is a set of utility functions to allow drivers to | |
3814 | * interact with driver-specific tools to aid, for instance, | |
3815 | * factory programming. | |
3816 | * | |
3817 | * This chapter describes how drivers interact with it, for more | |
3818 | * information see the nl80211 book's chapter on it. | |
3819 | */ | |
3820 | ||
aff89a9b JB |
3821 | /** |
3822 | * cfg80211_testmode_alloc_reply_skb - allocate testmode reply | |
3823 | * @wiphy: the wiphy | |
3824 | * @approxlen: an upper bound of the length of the data that will | |
3825 | * be put into the skb | |
3826 | * | |
3827 | * This function allocates and pre-fills an skb for a reply to | |
3828 | * the testmode command. Since it is intended for a reply, calling | |
3829 | * it outside of the @testmode_cmd operation is invalid. | |
3830 | * | |
0ae997dc YB |
3831 | * The returned skb is pre-filled with the wiphy index and set up in |
3832 | * a way that any data that is put into the skb (with skb_put(), | |
3833 | * nla_put() or similar) will end up being within the | |
3834 | * %NL80211_ATTR_TESTDATA attribute, so all that needs to be done | |
3835 | * with the skb is adding data for the corresponding userspace tool | |
3836 | * which can then read that data out of the testdata attribute. You | |
3837 | * must not modify the skb in any other way. | |
aff89a9b JB |
3838 | * |
3839 | * When done, call cfg80211_testmode_reply() with the skb and return | |
3840 | * its error code as the result of the @testmode_cmd operation. | |
0ae997dc YB |
3841 | * |
3842 | * Return: An allocated and pre-filled skb. %NULL if any errors happen. | |
aff89a9b JB |
3843 | */ |
3844 | struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, | |
3845 | int approxlen); | |
3846 | ||
3847 | /** | |
3848 | * cfg80211_testmode_reply - send the reply skb | |
3849 | * @skb: The skb, must have been allocated with | |
3850 | * cfg80211_testmode_alloc_reply_skb() | |
3851 | * | |
0ae997dc YB |
3852 | * Since calling this function will usually be the last thing |
3853 | * before returning from the @testmode_cmd you should return | |
3854 | * the error code. Note that this function consumes the skb | |
3855 | * regardless of the return value. | |
3856 | * | |
3857 | * Return: An error code or 0 on success. | |
aff89a9b JB |
3858 | */ |
3859 | int cfg80211_testmode_reply(struct sk_buff *skb); | |
3860 | ||
3861 | /** | |
3862 | * cfg80211_testmode_alloc_event_skb - allocate testmode event | |
3863 | * @wiphy: the wiphy | |
3864 | * @approxlen: an upper bound of the length of the data that will | |
3865 | * be put into the skb | |
3866 | * @gfp: allocation flags | |
3867 | * | |
3868 | * This function allocates and pre-fills an skb for an event on the | |
3869 | * testmode multicast group. | |
3870 | * | |
0ae997dc YB |
3871 | * The returned skb is set up in the same way as with |
3872 | * cfg80211_testmode_alloc_reply_skb() but prepared for an event. As | |
3873 | * there, you should simply add data to it that will then end up in the | |
3874 | * %NL80211_ATTR_TESTDATA attribute. Again, you must not modify the skb | |
3875 | * in any other way. | |
aff89a9b JB |
3876 | * |
3877 | * When done filling the skb, call cfg80211_testmode_event() with the | |
3878 | * skb to send the event. | |
0ae997dc YB |
3879 | * |
3880 | * Return: An allocated and pre-filled skb. %NULL if any errors happen. | |
aff89a9b JB |
3881 | */ |
3882 | struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, | |
3883 | int approxlen, gfp_t gfp); | |
3884 | ||
3885 | /** | |
3886 | * cfg80211_testmode_event - send the event | |
3887 | * @skb: The skb, must have been allocated with | |
3888 | * cfg80211_testmode_alloc_event_skb() | |
3889 | * @gfp: allocation flags | |
3890 | * | |
3891 | * This function sends the given @skb, which must have been allocated | |
3892 | * by cfg80211_testmode_alloc_event_skb(), as an event. It always | |
3893 | * consumes it. | |
3894 | */ | |
3895 | void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp); | |
3896 | ||
3897 | #define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd), | |
71063f0e | 3898 | #define CFG80211_TESTMODE_DUMP(cmd) .testmode_dump = (cmd), |
aff89a9b JB |
3899 | #else |
3900 | #define CFG80211_TESTMODE_CMD(cmd) | |
71063f0e | 3901 | #define CFG80211_TESTMODE_DUMP(cmd) |
aff89a9b JB |
3902 | #endif |
3903 | ||
b23aa676 SO |
3904 | /** |
3905 | * cfg80211_connect_result - notify cfg80211 of connection result | |
3906 | * | |
3907 | * @dev: network device | |
3908 | * @bssid: the BSSID of the AP | |
3909 | * @req_ie: association request IEs (maybe be %NULL) | |
3910 | * @req_ie_len: association request IEs length | |
3911 | * @resp_ie: association response IEs (may be %NULL) | |
3912 | * @resp_ie_len: assoc response IEs length | |
3913 | * @status: status code, 0 for successful connection, use | |
3914 | * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you | |
3915 | * the real status code for failures. | |
3916 | * @gfp: allocation flags | |
3917 | * | |
3918 | * It should be called by the underlying driver whenever connect() has | |
3919 | * succeeded. | |
3920 | */ | |
3921 | void cfg80211_connect_result(struct net_device *dev, const u8 *bssid, | |
3922 | const u8 *req_ie, size_t req_ie_len, | |
3923 | const u8 *resp_ie, size_t resp_ie_len, | |
3924 | u16 status, gfp_t gfp); | |
3925 | ||
3926 | /** | |
3927 | * cfg80211_roamed - notify cfg80211 of roaming | |
3928 | * | |
3929 | * @dev: network device | |
ed9d0102 | 3930 | * @channel: the channel of the new AP |
b23aa676 SO |
3931 | * @bssid: the BSSID of the new AP |
3932 | * @req_ie: association request IEs (maybe be %NULL) | |
3933 | * @req_ie_len: association request IEs length | |
3934 | * @resp_ie: association response IEs (may be %NULL) | |
3935 | * @resp_ie_len: assoc response IEs length | |
3936 | * @gfp: allocation flags | |
3937 | * | |
3938 | * It should be called by the underlying driver whenever it roamed | |
3939 | * from one AP to another while connected. | |
3940 | */ | |
ed9d0102 JM |
3941 | void cfg80211_roamed(struct net_device *dev, |
3942 | struct ieee80211_channel *channel, | |
3943 | const u8 *bssid, | |
b23aa676 SO |
3944 | const u8 *req_ie, size_t req_ie_len, |
3945 | const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp); | |
3946 | ||
adbde344 VT |
3947 | /** |
3948 | * cfg80211_roamed_bss - notify cfg80211 of roaming | |
3949 | * | |
3950 | * @dev: network device | |
3951 | * @bss: entry of bss to which STA got roamed | |
3952 | * @req_ie: association request IEs (maybe be %NULL) | |
3953 | * @req_ie_len: association request IEs length | |
3954 | * @resp_ie: association response IEs (may be %NULL) | |
3955 | * @resp_ie_len: assoc response IEs length | |
3956 | * @gfp: allocation flags | |
3957 | * | |
3958 | * This is just a wrapper to notify cfg80211 of roaming event with driver | |
3959 | * passing bss to avoid a race in timeout of the bss entry. It should be | |
3960 | * called by the underlying driver whenever it roamed from one AP to another | |
3961 | * while connected. Drivers which have roaming implemented in firmware | |
3962 | * may use this function to avoid a race in bss entry timeout where the bss | |
3963 | * entry of the new AP is seen in the driver, but gets timed out by the time | |
3964 | * it is accessed in __cfg80211_roamed() due to delay in scheduling | |
3965 | * rdev->event_work. In case of any failures, the reference is released | |
3966 | * either in cfg80211_roamed_bss() or in __cfg80211_romed(), Otherwise, | |
3967 | * it will be released while diconneting from the current bss. | |
3968 | */ | |
3969 | void cfg80211_roamed_bss(struct net_device *dev, struct cfg80211_bss *bss, | |
3970 | const u8 *req_ie, size_t req_ie_len, | |
3971 | const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp); | |
3972 | ||
b23aa676 SO |
3973 | /** |
3974 | * cfg80211_disconnected - notify cfg80211 that connection was dropped | |
3975 | * | |
3976 | * @dev: network device | |
3977 | * @ie: information elements of the deauth/disassoc frame (may be %NULL) | |
3978 | * @ie_len: length of IEs | |
3979 | * @reason: reason code for the disconnection, set it to 0 if unknown | |
3980 | * @gfp: allocation flags | |
3981 | * | |
3982 | * After it calls this function, the driver should enter an idle state | |
3983 | * and not try to connect to any AP any more. | |
3984 | */ | |
3985 | void cfg80211_disconnected(struct net_device *dev, u16 reason, | |
3986 | u8 *ie, size_t ie_len, gfp_t gfp); | |
3987 | ||
9588bbd5 JM |
3988 | /** |
3989 | * cfg80211_ready_on_channel - notification of remain_on_channel start | |
71bbc994 | 3990 | * @wdev: wireless device |
9588bbd5 JM |
3991 | * @cookie: the request cookie |
3992 | * @chan: The current channel (from remain_on_channel request) | |
9588bbd5 JM |
3993 | * @duration: Duration in milliseconds that the driver intents to remain on the |
3994 | * channel | |
3995 | * @gfp: allocation flags | |
3996 | */ | |
71bbc994 | 3997 | void cfg80211_ready_on_channel(struct wireless_dev *wdev, u64 cookie, |
9588bbd5 | 3998 | struct ieee80211_channel *chan, |
9588bbd5 JM |
3999 | unsigned int duration, gfp_t gfp); |
4000 | ||
4001 | /** | |
4002 | * cfg80211_remain_on_channel_expired - remain_on_channel duration expired | |
71bbc994 | 4003 | * @wdev: wireless device |
9588bbd5 JM |
4004 | * @cookie: the request cookie |
4005 | * @chan: The current channel (from remain_on_channel request) | |
9588bbd5 JM |
4006 | * @gfp: allocation flags |
4007 | */ | |
71bbc994 | 4008 | void cfg80211_remain_on_channel_expired(struct wireless_dev *wdev, u64 cookie, |
9588bbd5 | 4009 | struct ieee80211_channel *chan, |
9588bbd5 | 4010 | gfp_t gfp); |
b23aa676 | 4011 | |
98b62183 JB |
4012 | |
4013 | /** | |
4014 | * cfg80211_new_sta - notify userspace about station | |
4015 | * | |
4016 | * @dev: the netdev | |
4017 | * @mac_addr: the station's address | |
4018 | * @sinfo: the station information | |
4019 | * @gfp: allocation flags | |
4020 | */ | |
4021 | void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr, | |
4022 | struct station_info *sinfo, gfp_t gfp); | |
4023 | ||
ec15e68b JM |
4024 | /** |
4025 | * cfg80211_del_sta - notify userspace about deletion of a station | |
4026 | * | |
4027 | * @dev: the netdev | |
4028 | * @mac_addr: the station's address | |
4029 | * @gfp: allocation flags | |
4030 | */ | |
4031 | void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp); | |
4032 | ||
ed44a951 PP |
4033 | /** |
4034 | * cfg80211_conn_failed - connection request failed notification | |
4035 | * | |
4036 | * @dev: the netdev | |
4037 | * @mac_addr: the station's address | |
4038 | * @reason: the reason for connection failure | |
4039 | * @gfp: allocation flags | |
4040 | * | |
4041 | * Whenever a station tries to connect to an AP and if the station | |
4042 | * could not connect to the AP as the AP has rejected the connection | |
4043 | * for some reasons, this function is called. | |
4044 | * | |
4045 | * The reason for connection failure can be any of the value from | |
4046 | * nl80211_connect_failed_reason enum | |
4047 | */ | |
4048 | void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, | |
4049 | enum nl80211_connect_failed_reason reason, | |
4050 | gfp_t gfp); | |
4051 | ||
026331c4 | 4052 | /** |
2e161f78 | 4053 | * cfg80211_rx_mgmt - notification of received, unprocessed management frame |
71bbc994 | 4054 | * @wdev: wireless device receiving the frame |
026331c4 | 4055 | * @freq: Frequency on which the frame was received in MHz |
804483e9 | 4056 | * @sig_dbm: signal strength in mBm, or 0 if unknown |
2e161f78 | 4057 | * @buf: Management frame (header + body) |
026331c4 JM |
4058 | * @len: length of the frame data |
4059 | * @gfp: context flags | |
2e161f78 | 4060 | * |
0ae997dc YB |
4061 | * This function is called whenever an Action frame is received for a station |
4062 | * mode interface, but is not processed in kernel. | |
4063 | * | |
4064 | * Return: %true if a user space application has registered for this frame. | |
2e161f78 JB |
4065 | * For action frames, that makes it responsible for rejecting unrecognized |
4066 | * action frames; %false otherwise, in which case for action frames the | |
4067 | * driver is responsible for rejecting the frame. | |
026331c4 | 4068 | */ |
71bbc994 | 4069 | bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm, |
804483e9 | 4070 | const u8 *buf, size_t len, gfp_t gfp); |
026331c4 JM |
4071 | |
4072 | /** | |
2e161f78 | 4073 | * cfg80211_mgmt_tx_status - notification of TX status for management frame |
71bbc994 | 4074 | * @wdev: wireless device receiving the frame |
2e161f78 JB |
4075 | * @cookie: Cookie returned by cfg80211_ops::mgmt_tx() |
4076 | * @buf: Management frame (header + body) | |
026331c4 JM |
4077 | * @len: length of the frame data |
4078 | * @ack: Whether frame was acknowledged | |
4079 | * @gfp: context flags | |
4080 | * | |
2e161f78 JB |
4081 | * This function is called whenever a management frame was requested to be |
4082 | * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the | |
026331c4 JM |
4083 | * transmission attempt. |
4084 | */ | |
71bbc994 | 4085 | void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie, |
2e161f78 | 4086 | const u8 *buf, size_t len, bool ack, gfp_t gfp); |
026331c4 | 4087 | |
d6dc1a38 JO |
4088 | |
4089 | /** | |
4090 | * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event | |
4091 | * @dev: network device | |
4092 | * @rssi_event: the triggered RSSI event | |
4093 | * @gfp: context flags | |
4094 | * | |
4095 | * This function is called when a configured connection quality monitoring | |
4096 | * rssi threshold reached event occurs. | |
4097 | */ | |
4098 | void cfg80211_cqm_rssi_notify(struct net_device *dev, | |
4099 | enum nl80211_cqm_rssi_threshold_event rssi_event, | |
4100 | gfp_t gfp); | |
4101 | ||
04f39047 SW |
4102 | /** |
4103 | * cfg80211_radar_event - radar detection event | |
4104 | * @wiphy: the wiphy | |
4105 | * @chandef: chandef for the current channel | |
4106 | * @gfp: context flags | |
4107 | * | |
4108 | * This function is called when a radar is detected on the current chanenl. | |
4109 | */ | |
4110 | void cfg80211_radar_event(struct wiphy *wiphy, | |
4111 | struct cfg80211_chan_def *chandef, gfp_t gfp); | |
4112 | ||
4113 | /** | |
4114 | * cfg80211_cac_event - Channel availability check (CAC) event | |
4115 | * @netdev: network device | |
4116 | * @event: type of event | |
4117 | * @gfp: context flags | |
4118 | * | |
4119 | * This function is called when a Channel availability check (CAC) is finished | |
4120 | * or aborted. This must be called to notify the completion of a CAC process, | |
4121 | * also by full-MAC drivers. | |
4122 | */ | |
4123 | void cfg80211_cac_event(struct net_device *netdev, | |
4124 | enum nl80211_radar_event event, gfp_t gfp); | |
4125 | ||
4126 | ||
c063dbf5 JB |
4127 | /** |
4128 | * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer | |
4129 | * @dev: network device | |
4130 | * @peer: peer's MAC address | |
4131 | * @num_packets: how many packets were lost -- should be a fixed threshold | |
4132 | * but probably no less than maybe 50, or maybe a throughput dependent | |
4133 | * threshold (to account for temporary interference) | |
4134 | * @gfp: context flags | |
4135 | */ | |
4136 | void cfg80211_cqm_pktloss_notify(struct net_device *dev, | |
4137 | const u8 *peer, u32 num_packets, gfp_t gfp); | |
4138 | ||
84f10708 TP |
4139 | /** |
4140 | * cfg80211_cqm_txe_notify - TX error rate event | |
4141 | * @dev: network device | |
4142 | * @peer: peer's MAC address | |
4143 | * @num_packets: how many packets were lost | |
4144 | * @rate: % of packets which failed transmission | |
4145 | * @intvl: interval (in s) over which the TX failure threshold was breached. | |
4146 | * @gfp: context flags | |
4147 | * | |
4148 | * Notify userspace when configured % TX failures over number of packets in a | |
4149 | * given interval is exceeded. | |
4150 | */ | |
4151 | void cfg80211_cqm_txe_notify(struct net_device *dev, const u8 *peer, | |
4152 | u32 num_packets, u32 rate, u32 intvl, gfp_t gfp); | |
4153 | ||
e5497d76 JB |
4154 | /** |
4155 | * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying | |
4156 | * @dev: network device | |
4157 | * @bssid: BSSID of AP (to avoid races) | |
4158 | * @replay_ctr: new replay counter | |
af71ff85 | 4159 | * @gfp: allocation flags |
e5497d76 JB |
4160 | */ |
4161 | void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid, | |
4162 | const u8 *replay_ctr, gfp_t gfp); | |
4163 | ||
c9df56b4 JM |
4164 | /** |
4165 | * cfg80211_pmksa_candidate_notify - notify about PMKSA caching candidate | |
4166 | * @dev: network device | |
4167 | * @index: candidate index (the smaller the index, the higher the priority) | |
4168 | * @bssid: BSSID of AP | |
4169 | * @preauth: Whether AP advertises support for RSN pre-authentication | |
4170 | * @gfp: allocation flags | |
4171 | */ | |
4172 | void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, | |
4173 | const u8 *bssid, bool preauth, gfp_t gfp); | |
4174 | ||
28946da7 JB |
4175 | /** |
4176 | * cfg80211_rx_spurious_frame - inform userspace about a spurious frame | |
4177 | * @dev: The device the frame matched to | |
4178 | * @addr: the transmitter address | |
4179 | * @gfp: context flags | |
4180 | * | |
4181 | * This function is used in AP mode (only!) to inform userspace that | |
4182 | * a spurious class 3 frame was received, to be able to deauth the | |
4183 | * sender. | |
0ae997dc | 4184 | * Return: %true if the frame was passed to userspace (or this failed |
28946da7 JB |
4185 | * for a reason other than not having a subscription.) |
4186 | */ | |
4187 | bool cfg80211_rx_spurious_frame(struct net_device *dev, | |
4188 | const u8 *addr, gfp_t gfp); | |
4189 | ||
b92ab5d8 JB |
4190 | /** |
4191 | * cfg80211_rx_unexpected_4addr_frame - inform about unexpected WDS frame | |
4192 | * @dev: The device the frame matched to | |
4193 | * @addr: the transmitter address | |
4194 | * @gfp: context flags | |
4195 | * | |
4196 | * This function is used in AP mode (only!) to inform userspace that | |
4197 | * an associated station sent a 4addr frame but that wasn't expected. | |
4198 | * It is allowed and desirable to send this event only once for each | |
4199 | * station to avoid event flooding. | |
0ae997dc | 4200 | * Return: %true if the frame was passed to userspace (or this failed |
b92ab5d8 JB |
4201 | * for a reason other than not having a subscription.) |
4202 | */ | |
4203 | bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, | |
4204 | const u8 *addr, gfp_t gfp); | |
4205 | ||
7f6cf311 JB |
4206 | /** |
4207 | * cfg80211_probe_status - notify userspace about probe status | |
4208 | * @dev: the device the probe was sent on | |
4209 | * @addr: the address of the peer | |
4210 | * @cookie: the cookie filled in @probe_client previously | |
4211 | * @acked: indicates whether probe was acked or not | |
4212 | * @gfp: allocation flags | |
4213 | */ | |
4214 | void cfg80211_probe_status(struct net_device *dev, const u8 *addr, | |
4215 | u64 cookie, bool acked, gfp_t gfp); | |
4216 | ||
5e760230 JB |
4217 | /** |
4218 | * cfg80211_report_obss_beacon - report beacon from other APs | |
4219 | * @wiphy: The wiphy that received the beacon | |
4220 | * @frame: the frame | |
4221 | * @len: length of the frame | |
4222 | * @freq: frequency the frame was received on | |
804483e9 | 4223 | * @sig_dbm: signal strength in mBm, or 0 if unknown |
5e760230 JB |
4224 | * |
4225 | * Use this function to report to userspace when a beacon was | |
4226 | * received. It is not useful to call this when there is no | |
4227 | * netdev that is in AP/GO mode. | |
4228 | */ | |
4229 | void cfg80211_report_obss_beacon(struct wiphy *wiphy, | |
4230 | const u8 *frame, size_t len, | |
37c73b5f | 4231 | int freq, int sig_dbm); |
5e760230 | 4232 | |
d58e7e37 | 4233 | /** |
683b6d3b | 4234 | * cfg80211_reg_can_beacon - check if beaconing is allowed |
54858ee5 | 4235 | * @wiphy: the wiphy |
683b6d3b | 4236 | * @chandef: the channel definition |
d58e7e37 | 4237 | * |
0ae997dc YB |
4238 | * Return: %true if there is no secondary channel or the secondary channel(s) |
4239 | * can be used for beaconing (i.e. is not a radar channel etc.) | |
54858ee5 | 4240 | */ |
683b6d3b JB |
4241 | bool cfg80211_reg_can_beacon(struct wiphy *wiphy, |
4242 | struct cfg80211_chan_def *chandef); | |
54858ee5 | 4243 | |
5314526b TP |
4244 | /* |
4245 | * cfg80211_ch_switch_notify - update wdev channel and notify userspace | |
4246 | * @dev: the device which switched channels | |
683b6d3b | 4247 | * @chandef: the new channel definition |
5314526b TP |
4248 | * |
4249 | * Acquires wdev_lock, so must only be called from sleepable driver context! | |
4250 | */ | |
683b6d3b JB |
4251 | void cfg80211_ch_switch_notify(struct net_device *dev, |
4252 | struct cfg80211_chan_def *chandef); | |
5314526b | 4253 | |
1ce3e82b JB |
4254 | /** |
4255 | * ieee80211_operating_class_to_band - convert operating class to band | |
4256 | * | |
4257 | * @operating_class: the operating class to convert | |
4258 | * @band: band pointer to fill | |
4259 | * | |
4260 | * Returns %true if the conversion was successful, %false otherwise. | |
4261 | */ | |
4262 | bool ieee80211_operating_class_to_band(u8 operating_class, | |
4263 | enum ieee80211_band *band); | |
4264 | ||
3475b094 JM |
4265 | /* |
4266 | * cfg80211_tdls_oper_request - request userspace to perform TDLS operation | |
4267 | * @dev: the device on which the operation is requested | |
4268 | * @peer: the MAC address of the peer device | |
4269 | * @oper: the requested TDLS operation (NL80211_TDLS_SETUP or | |
4270 | * NL80211_TDLS_TEARDOWN) | |
4271 | * @reason_code: the reason code for teardown request | |
4272 | * @gfp: allocation flags | |
4273 | * | |
4274 | * This function is used to request userspace to perform TDLS operation that | |
4275 | * requires knowledge of keys, i.e., link setup or teardown when the AP | |
4276 | * connection uses encryption. This is optional mechanism for the driver to use | |
4277 | * if it can automatically determine when a TDLS link could be useful (e.g., | |
4278 | * based on traffic and signal strength for a peer). | |
4279 | */ | |
4280 | void cfg80211_tdls_oper_request(struct net_device *dev, const u8 *peer, | |
4281 | enum nl80211_tdls_operation oper, | |
4282 | u16 reason_code, gfp_t gfp); | |
4283 | ||
8097e149 TP |
4284 | /* |
4285 | * cfg80211_calculate_bitrate - calculate actual bitrate (in 100Kbps units) | |
4286 | * @rate: given rate_info to calculate bitrate from | |
4287 | * | |
4288 | * return 0 if MCS index >= 32 | |
4289 | */ | |
8eb41c8d | 4290 | u32 cfg80211_calculate_bitrate(struct rate_info *rate); |
8097e149 | 4291 | |
98104fde JB |
4292 | /** |
4293 | * cfg80211_unregister_wdev - remove the given wdev | |
4294 | * @wdev: struct wireless_dev to remove | |
4295 | * | |
4296 | * Call this function only for wdevs that have no netdev assigned, | |
4297 | * e.g. P2P Devices. It removes the device from the list so that | |
4298 | * it can no longer be used. It is necessary to call this function | |
4299 | * even when cfg80211 requests the removal of the interface by | |
4300 | * calling the del_virtual_intf() callback. The function must also | |
4301 | * be called when the driver wishes to unregister the wdev, e.g. | |
4302 | * when the device is unbound from the driver. | |
4303 | * | |
4304 | * Requires the RTNL to be held. | |
4305 | */ | |
4306 | void cfg80211_unregister_wdev(struct wireless_dev *wdev); | |
4307 | ||
355199e0 JM |
4308 | /** |
4309 | * struct cfg80211_ft_event - FT Information Elements | |
4310 | * @ies: FT IEs | |
4311 | * @ies_len: length of the FT IE in bytes | |
4312 | * @target_ap: target AP's MAC address | |
4313 | * @ric_ies: RIC IE | |
4314 | * @ric_ies_len: length of the RIC IE in bytes | |
4315 | */ | |
4316 | struct cfg80211_ft_event_params { | |
4317 | const u8 *ies; | |
4318 | size_t ies_len; | |
4319 | const u8 *target_ap; | |
4320 | const u8 *ric_ies; | |
4321 | size_t ric_ies_len; | |
4322 | }; | |
4323 | ||
4324 | /** | |
4325 | * cfg80211_ft_event - notify userspace about FT IE and RIC IE | |
4326 | * @netdev: network device | |
4327 | * @ft_event: IE information | |
4328 | */ | |
4329 | void cfg80211_ft_event(struct net_device *netdev, | |
4330 | struct cfg80211_ft_event_params *ft_event); | |
4331 | ||
0ee45355 JB |
4332 | /** |
4333 | * cfg80211_get_p2p_attr - find and copy a P2P attribute from IE buffer | |
4334 | * @ies: the input IE buffer | |
4335 | * @len: the input length | |
4336 | * @attr: the attribute ID to find | |
4337 | * @buf: output buffer, can be %NULL if the data isn't needed, e.g. | |
4338 | * if the function is only called to get the needed buffer size | |
4339 | * @bufsize: size of the output buffer | |
4340 | * | |
4341 | * The function finds a given P2P attribute in the (vendor) IEs and | |
4342 | * copies its contents to the given buffer. | |
4343 | * | |
0ae997dc YB |
4344 | * Return: A negative error code (-%EILSEQ or -%ENOENT) if the data is |
4345 | * malformed or the attribute can't be found (respectively), or the | |
4346 | * length of the found attribute (which can be zero). | |
0ee45355 | 4347 | */ |
c216e641 AS |
4348 | int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, |
4349 | enum ieee80211_p2p_attr_id attr, | |
4350 | u8 *buf, unsigned int bufsize); | |
0ee45355 | 4351 | |
cd8f7cb4 JB |
4352 | /** |
4353 | * cfg80211_report_wowlan_wakeup - report wakeup from WoWLAN | |
4354 | * @wdev: the wireless device reporting the wakeup | |
4355 | * @wakeup: the wakeup report | |
4356 | * @gfp: allocation flags | |
4357 | * | |
4358 | * This function reports that the given device woke up. If it | |
4359 | * caused the wakeup, report the reason(s), otherwise you may | |
4360 | * pass %NULL as the @wakeup parameter to advertise that something | |
4361 | * else caused the wakeup. | |
4362 | */ | |
4363 | void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, | |
4364 | struct cfg80211_wowlan_wakeup *wakeup, | |
4365 | gfp_t gfp); | |
4366 | ||
5de17984 AS |
4367 | /** |
4368 | * cfg80211_crit_proto_stopped() - indicate critical protocol stopped by driver. | |
4369 | * | |
4370 | * @wdev: the wireless device for which critical protocol is stopped. | |
03f831a6 | 4371 | * @gfp: allocation flags |
5de17984 AS |
4372 | * |
4373 | * This function can be called by the driver to indicate it has reverted | |
4374 | * operation back to normal. One reason could be that the duration given | |
4375 | * by .crit_proto_start() has expired. | |
4376 | */ | |
4377 | void cfg80211_crit_proto_stopped(struct wireless_dev *wdev, gfp_t gfp); | |
4378 | ||
e1db74fc JP |
4379 | /* Logging, debugging and troubleshooting/diagnostic helpers. */ |
4380 | ||
4381 | /* wiphy_printk helpers, similar to dev_printk */ | |
4382 | ||
4383 | #define wiphy_printk(level, wiphy, format, args...) \ | |
9c376639 | 4384 | dev_printk(level, &(wiphy)->dev, format, ##args) |
e1db74fc | 4385 | #define wiphy_emerg(wiphy, format, args...) \ |
9c376639 | 4386 | dev_emerg(&(wiphy)->dev, format, ##args) |
e1db74fc | 4387 | #define wiphy_alert(wiphy, format, args...) \ |
9c376639 | 4388 | dev_alert(&(wiphy)->dev, format, ##args) |
e1db74fc | 4389 | #define wiphy_crit(wiphy, format, args...) \ |
9c376639 | 4390 | dev_crit(&(wiphy)->dev, format, ##args) |
e1db74fc | 4391 | #define wiphy_err(wiphy, format, args...) \ |
9c376639 | 4392 | dev_err(&(wiphy)->dev, format, ##args) |
e1db74fc | 4393 | #define wiphy_warn(wiphy, format, args...) \ |
9c376639 | 4394 | dev_warn(&(wiphy)->dev, format, ##args) |
e1db74fc | 4395 | #define wiphy_notice(wiphy, format, args...) \ |
9c376639 | 4396 | dev_notice(&(wiphy)->dev, format, ##args) |
e1db74fc | 4397 | #define wiphy_info(wiphy, format, args...) \ |
9c376639 | 4398 | dev_info(&(wiphy)->dev, format, ##args) |
073730d7 | 4399 | |
9c376639 | 4400 | #define wiphy_debug(wiphy, format, args...) \ |
e1db74fc | 4401 | wiphy_printk(KERN_DEBUG, wiphy, format, ##args) |
9c376639 | 4402 | |
e1db74fc | 4403 | #define wiphy_dbg(wiphy, format, args...) \ |
9c376639 | 4404 | dev_dbg(&(wiphy)->dev, format, ##args) |
e1db74fc JP |
4405 | |
4406 | #if defined(VERBOSE_DEBUG) | |
4407 | #define wiphy_vdbg wiphy_dbg | |
4408 | #else | |
e1db74fc JP |
4409 | #define wiphy_vdbg(wiphy, format, args...) \ |
4410 | ({ \ | |
4411 | if (0) \ | |
4412 | wiphy_printk(KERN_DEBUG, wiphy, format, ##args); \ | |
9c376639 | 4413 | 0; \ |
e1db74fc JP |
4414 | }) |
4415 | #endif | |
4416 | ||
4417 | /* | |
4418 | * wiphy_WARN() acts like wiphy_printk(), but with the key difference | |
4419 | * of using a WARN/WARN_ON to get the message out, including the | |
4420 | * file/line information and a backtrace. | |
4421 | */ | |
4422 | #define wiphy_WARN(wiphy, format, args...) \ | |
4423 | WARN(1, "wiphy: %s\n" format, wiphy_name(wiphy), ##args); | |
4424 | ||
704232c2 | 4425 | #endif /* __NET_CFG80211_H */ |