[linux-block.git] / include / linux / vdpa.h

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_VDPA_H
#define _LINUX_VDPA_H

#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/vhost_iotlb.h>

/**
 * struct vdpa_calllback - vDPA callback definition.
 * @callback: interrupt callback function
 * @private: the data passed to the callback function
 */
struct vdpa_callback {
	irqreturn_t (*callback)(void *data);
	void *private;
};

/**
 * struct vdpa_notification_area - vDPA notification area
 * @addr: base address of the notification area
 * @size: size of the notification area
 */
struct vdpa_notification_area {
	resource_size_t addr;
	resource_size_t size;
};

/**
 * struct vdpa_vq_state_split - vDPA split virtqueue state
 * @avail_index: available index
 */
struct vdpa_vq_state_split {
	u16	avail_index;
};

/**
 * struct vdpa_vq_state_packed - vDPA packed virtqueue state
 * @last_avail_counter: last driver ring wrap counter observed by device
 * @last_avail_idx: device available index
 * @last_used_counter: device ring wrap counter
 * @last_used_idx: used index
 */
struct vdpa_vq_state_packed {
        u16	last_avail_counter:1;
        u16	last_avail_idx:15;
        u16	last_used_counter:1;
        u16	last_used_idx:15;
};

struct vdpa_vq_state {
     union {
          struct vdpa_vq_state_split split;
          struct vdpa_vq_state_packed packed;
     };
};

struct vdpa_mgmt_dev;

/**
 * struct vdpa_device - representation of a vDPA device
 * @dev: underlying device
 * @dma_dev: the actual device that is performing DMA
 * @config: the configuration ops for this device.
 * @index: device index
 * @features_valid: were features initialized? for legacy guests
 * @nvqs: maximum number of supported virtqueues
 * @mdev: management device pointer; caller must setup when registering device as part
 *	  of dev_add() mgmtdev ops callback before invoking _vdpa_register_device().
 */
struct vdpa_device {
	struct device dev;
	struct device *dma_dev;
	const struct vdpa_config_ops *config;
	unsigned int index;
	bool features_valid;
	int nvqs;
	struct vdpa_mgmt_dev *mdev;
};

/**
 * struct vdpa_iova_range - the IOVA range support by the device
 * @first: start of the IOVA range
 * @last: end of the IOVA range
 */
struct vdpa_iova_range {
	u64 first;
	u64 last;
};

/**
 * struct vdpa_config_ops - operations for configuring a vDPA device.
 * Note: vDPA device drivers are required to implement all of the
 * operations unless it is mentioned to be optional in the following
 * list.
 *
 * @set_vq_address:		Set the address of virtqueue
 *				@vdev: vdpa device
 *				@idx: virtqueue index
 *				@desc_area: address of desc area
 *				@driver_area: address of driver area
 *				@device_area: address of device area
 *				Returns integer: success (0) or error (< 0)
 * @set_vq_num:			Set the size of virtqueue
 *				@vdev: vdpa device
 *				@idx: virtqueue index
 *				@num: the size of virtqueue
 * @kick_vq:			Kick the virtqueue
 *				@vdev: vdpa device
 *				@idx: virtqueue index
 * @set_vq_cb:			Set the interrupt callback function for
 *				a virtqueue
 *				@vdev: vdpa device
 *				@idx: virtqueue index
 *				@cb: virtio-vdev interrupt callback structure
 * @set_vq_ready:		Set ready status for a virtqueue
 *				@vdev: vdpa device
 *				@idx: virtqueue index
 *				@ready: ready (true) not ready(false)
 * @get_vq_ready:		Get ready status for a virtqueue
 *				@vdev: vdpa device
 *				@idx: virtqueue index
 *				Returns boolean: ready (true) or not (false)
 * @set_vq_state:		Set the state for a virtqueue
 *				@vdev: vdpa device
 *				@idx: virtqueue index
 *				@state: pointer to set virtqueue state (last_avail_idx)
 *				Returns integer: success (0) or error (< 0)
 * @get_vq_state:		Get the state for a virtqueue
 *				@vdev: vdpa device
 *				@idx: virtqueue index
 *				@state: pointer to returned state (last_avail_idx)
 * @get_vq_notification: 	Get the notification area for a virtqueue
 *				@vdev: vdpa device
 *				@idx: virtqueue index
 *				Returns the notifcation area
 * @get_vq_irq:			Get the irq number of a virtqueue (optional,
 *				but must implemented if require vq irq offloading)
 *				@vdev: vdpa device
 *				@idx: virtqueue index
 *				Returns int: irq number of a virtqueue,
 *				negative number if no irq assigned.
 * @get_vq_align:		Get the virtqueue align requirement
 *				for the device
 *				@vdev: vdpa device
 *				Returns virtqueue algin requirement
 * @get_features:		Get virtio features supported by the device
 *				@vdev: vdpa device
 *				Returns the virtio features support by the
 *				device
 * @set_features:		Set virtio features supported by the driver
 *				@vdev: vdpa device
 *				@features: feature support by the driver
 *				Returns integer: success (0) or error (< 0)
 * @set_config_cb:		Set the config interrupt callback
 *				@vdev: vdpa device
 *				@cb: virtio-vdev interrupt callback structure
 * @get_vq_num_max:		Get the max size of virtqueue
 *				@vdev: vdpa device
 *				Returns u16: max size of virtqueue
 * @get_device_id:		Get virtio device id
 *				@vdev: vdpa device
 *				Returns u32: virtio device id
 * @get_vendor_id:		Get id for the vendor that provides this device
 *				@vdev: vdpa device
 *				Returns u32: virtio vendor id
 * @get_status:			Get the device status
 *				@vdev: vdpa device
 *				Returns u8: virtio device status
 * @set_status:			Set the device status
 *				@vdev: vdpa device
 *				@status: virtio device status
 * @get_config_size:		Get the size of the configuration space
 *				@vdev: vdpa device
 *				Returns size_t: configuration size
 * @get_config:			Read from device specific configuration space
 *				@vdev: vdpa device
 *				@offset: offset from the beginning of
 *				configuration space
 *				@buf: buffer used to read to
 *				@len: the length to read from
 *				configuration space
 * @set_config:			Write to device specific configuration space
 *				@vdev: vdpa device
 *				@offset: offset from the beginning of
 *				configuration space
 *				@buf: buffer used to write from
 *				@len: the length to write to
 *				configuration space
 * @get_generation:		Get device config generation (optional)
 *				@vdev: vdpa device
 *				Returns u32: device generation
 * @get_iova_range:		Get supported iova range (optional)
 *				@vdev: vdpa device
 *				Returns the iova range supported by
 *				the device.
 * @set_map:			Set device memory mapping (optional)
 *				Needed for device that using device
 *				specific DMA translation (on-chip IOMMU)
 *				@vdev: vdpa device
 *				@iotlb: vhost memory mapping to be
 *				used by the vDPA
 *				Returns integer: success (0) or error (< 0)
 * @dma_map:			Map an area of PA to IOVA (optional)
 *				Needed for device that using device
 *				specific DMA translation (on-chip IOMMU)
 *				and preferring incremental map.
 *				@vdev: vdpa device
 *				@iova: iova to be mapped
 *				@size: size of the area
 *				@pa: physical address for the map
 *				@perm: device access permission (VHOST_MAP_XX)
 *				Returns integer: success (0) or error (< 0)
 * @dma_unmap:			Unmap an area of IOVA (optional but
 *				must be implemented with dma_map)
 *				Needed for device that using device
 *				specific DMA translation (on-chip IOMMU)
 *				and preferring incremental unmap.
 *				@vdev: vdpa device
 *				@iova: iova to be unmapped
 *				@size: size of the area
 *				Returns integer: success (0) or error (< 0)
 * @free:			Free resources that belongs to vDPA (optional)
 *				@vdev: vdpa device
 */
struct vdpa_config_ops {
	/* Virtqueue ops */
	int (*set_vq_address)(struct vdpa_device *vdev,
			      u16 idx, u64 desc_area, u64 driver_area,
			      u64 device_area);
	void (*set_vq_num)(struct vdpa_device *vdev, u16 idx, u32 num);
	void (*kick_vq)(struct vdpa_device *vdev, u16 idx);
	void (*set_vq_cb)(struct vdpa_device *vdev, u16 idx,
			  struct vdpa_callback *cb);
	void (*set_vq_ready)(struct vdpa_device *vdev, u16 idx, bool ready);
	bool (*get_vq_ready)(struct vdpa_device *vdev, u16 idx);
	int (*set_vq_state)(struct vdpa_device *vdev, u16 idx,
			    const struct vdpa_vq_state *state);
	int (*get_vq_state)(struct vdpa_device *vdev, u16 idx,
			    struct vdpa_vq_state *state);
	struct vdpa_notification_area
	(*get_vq_notification)(struct vdpa_device *vdev, u16 idx);
	/* vq irq is not expected to be changed once DRIVER_OK is set */
	int (*get_vq_irq)(struct vdpa_device *vdv, u16 idx);

	/* Device ops */
	u32 (*get_vq_align)(struct vdpa_device *vdev);
	u64 (*get_features)(struct vdpa_device *vdev);
	int (*set_features)(struct vdpa_device *vdev, u64 features);
	void (*set_config_cb)(struct vdpa_device *vdev,
			      struct vdpa_callback *cb);
	u16 (*get_vq_num_max)(struct vdpa_device *vdev);
	u32 (*get_device_id)(struct vdpa_device *vdev);
	u32 (*get_vendor_id)(struct vdpa_device *vdev);
	u8 (*get_status)(struct vdpa_device *vdev);
	void (*set_status)(struct vdpa_device *vdev, u8 status);
	size_t (*get_config_size)(struct vdpa_device *vdev);
	void (*get_config)(struct vdpa_device *vdev, unsigned int offset,
			   void *buf, unsigned int len);
	void (*set_config)(struct vdpa_device *vdev, unsigned int offset,
			   const void *buf, unsigned int len);
	u32 (*get_generation)(struct vdpa_device *vdev);
	struct vdpa_iova_range (*get_iova_range)(struct vdpa_device *vdev);

	/* DMA ops */
	int (*set_map)(struct vdpa_device *vdev, struct vhost_iotlb *iotlb);
	int (*dma_map)(struct vdpa_device *vdev, u64 iova, u64 size,
		       u64 pa, u32 perm);
	int (*dma_unmap)(struct vdpa_device *vdev, u64 iova, u64 size);

	/* Free device resources */
	void (*free)(struct vdpa_device *vdev);
};

struct vdpa_device *__vdpa_alloc_device(struct device *parent,
					const struct vdpa_config_ops *config,
					size_t size, const char *name);

/**
 * vdpa_alloc_device - allocate and initilaize a vDPA device
 *
 * @dev_struct: the type of the parent structure
 * @member: the name of struct vdpa_device within the @dev_struct
 * @parent: the parent device
 * @config: the bus operations that is supported by this device
 * @name: name of the vdpa device
 *
 * Return allocated data structure or ERR_PTR upon error
 */
#define vdpa_alloc_device(dev_struct, member, parent, config, name)   \
			  container_of(__vdpa_alloc_device( \
				       parent, config, \
				       sizeof(dev_struct) + \
				       BUILD_BUG_ON_ZERO(offsetof( \
				       dev_struct, member)), name), \
				       dev_struct, member)

int vdpa_register_device(struct vdpa_device *vdev, int nvqs);
void vdpa_unregister_device(struct vdpa_device *vdev);

int _vdpa_register_device(struct vdpa_device *vdev, int nvqs);
void _vdpa_unregister_device(struct vdpa_device *vdev);

/**
 * struct vdpa_driver - operations for a vDPA driver
 * @driver: underlying device driver
 * @probe: the function to call when a device is found.  Returns 0 or -errno.
 * @remove: the function to call when a device is removed.
 */
struct vdpa_driver {
	struct device_driver driver;
	int (*probe)(struct vdpa_device *vdev);
	void (*remove)(struct vdpa_device *vdev);
};

#define vdpa_register_driver(drv) \
	__vdpa_register_driver(drv, THIS_MODULE)
int __vdpa_register_driver(struct vdpa_driver *drv, struct module *owner);
void vdpa_unregister_driver(struct vdpa_driver *drv);

#define module_vdpa_driver(__vdpa_driver) \
	module_driver(__vdpa_driver, vdpa_register_driver,	\
		      vdpa_unregister_driver)

static inline struct vdpa_driver *drv_to_vdpa(struct device_driver *driver)
{
	return container_of(driver, struct vdpa_driver, driver);
}

static inline struct vdpa_device *dev_to_vdpa(struct device *_dev)
{
	return container_of(_dev, struct vdpa_device, dev);
}

static inline void *vdpa_get_drvdata(const struct vdpa_device *vdev)
{
	return dev_get_drvdata(&vdev->dev);
}

static inline void vdpa_set_drvdata(struct vdpa_device *vdev, void *data)
{
	dev_set_drvdata(&vdev->dev, data);
}

static inline struct device *vdpa_get_dma_dev(struct vdpa_device *vdev)
{
	return vdev->dma_dev;
}

static inline void vdpa_reset(struct vdpa_device *vdev)
{
        const struct vdpa_config_ops *ops = vdev->config;

	vdev->features_valid = false;
        ops->set_status(vdev, 0);
}

static inline int vdpa_set_features(struct vdpa_device *vdev, u64 features)
{
        const struct vdpa_config_ops *ops = vdev->config;

	vdev->features_valid = true;
        return ops->set_features(vdev, features);
}


static inline void vdpa_get_config(struct vdpa_device *vdev, unsigned offset,
				   void *buf, unsigned int len)
{
        const struct vdpa_config_ops *ops = vdev->config;

	/*
	 * Config accesses aren't supposed to trigger before features are set.
	 * If it does happen we assume a legacy guest.
	 */
	if (!vdev->features_valid)
		vdpa_set_features(vdev, 0);
	ops->get_config(vdev, offset, buf, len);
}

/**
 * struct vdpa_mgmtdev_ops - vdpa device ops
 * @dev_add: Add a vdpa device using alloc and register
 *	     @mdev: parent device to use for device addition
 *	     @name: name of the new vdpa device
 *	     Driver need to add a new device using _vdpa_register_device()
 *	     after fully initializing the vdpa device. Driver must return 0
 *	     on success or appropriate error code.
 * @dev_del: Remove a vdpa device using unregister
 *	     @mdev: parent device to use for device removal
 *	     @dev: vdpa device to remove
 *	     Driver need to remove the specified device by calling
 *	     _vdpa_unregister_device().
 */
struct vdpa_mgmtdev_ops {
	int (*dev_add)(struct vdpa_mgmt_dev *mdev, const char *name);
	void (*dev_del)(struct vdpa_mgmt_dev *mdev, struct vdpa_device *dev);
};

struct vdpa_mgmt_dev {
	struct device *device;
	const struct vdpa_mgmtdev_ops *ops;
	const struct virtio_device_id *id_table; /* supported ids */
	struct list_head list;
};

int vdpa_mgmtdev_register(struct vdpa_mgmt_dev *mdev);
void vdpa_mgmtdev_unregister(struct vdpa_mgmt_dev *mdev);

#endif /* _LINUX_VDPA_H */
Commit	Line	Data
961e9c84 JW	1	/* SPDX-License-Identifier: GPL-2.0 */
	2	#ifndef _LINUX_VDPA_H
	3	#define _LINUX_VDPA_H
	4
	5	#include <linux/kernel.h>
	6	#include <linux/device.h>
	7	#include <linux/interrupt.h>
	8	#include <linux/vhost_iotlb.h>
	9
	10	/**
d0f9164e	11	* struct vdpa_calllback - vDPA callback definition.
961e9c84 JW	12	* @callback: interrupt callback function
	13	* @private: the data passed to the callback function
	14	*/
	15	struct vdpa_callback {
	16	irqreturn_t (callback)(void data);
	17	void *private;
	18	};
	19
c25a26e6	20	/**
d0f9164e	21	* struct vdpa_notification_area - vDPA notification area
c25a26e6 JW	22	* @addr: base address of the notification area
	23	* @size: size of the notification area
	24	*/
	25	struct vdpa_notification_area {
	26	resource_size_t addr;
	27	resource_size_t size;
	28	};
	29
aac50c0b	30	/**
530a5678	31	* struct vdpa_vq_state_split - vDPA split virtqueue state
aac50c0b EC	32	* @avail_index: available index
aac50c0b EC	33	*/
530a5678	34	struct vdpa_vq_state_split {
aac50c0b EC	35	u16 avail_index;
	36	};
	37
530a5678 JW	38	/**
	39	* struct vdpa_vq_state_packed - vDPA packed virtqueue state
	40	* @last_avail_counter: last driver ring wrap counter observed by device
	41	* @last_avail_idx: device available index
	42	* @last_used_counter: device ring wrap counter
	43	* @last_used_idx: used index
	44	*/
	45	struct vdpa_vq_state_packed {
	46	u16 last_avail_counter:1;
	47	u16 last_avail_idx:15;
	48	u16 last_used_counter:1;
	49	u16 last_used_idx:15;
	50	};
	51
	52	struct vdpa_vq_state {
	53	union {
	54	struct vdpa_vq_state_split split;
	55	struct vdpa_vq_state_packed packed;
	56	};
	57	};
	58
33b34750 PP	59	struct vdpa_mgmt_dev;
33b34750 PP	60
961e9c84	61	/**
d0f9164e	62	* struct vdpa_device - representation of a vDPA device
961e9c84 JW	63	* @dev: underlying device
	64	* @dma_dev: the actual device that is performing DMA
	65	* @config: the configuration ops for this device.
	66	* @index: device index
452639a6	67	* @features_valid: were features initialized? for legacy guests
476c135e	68	* @nvqs: maximum number of supported virtqueues
903f7bca PP	69	* @mdev: management device pointer; caller must setup when registering device as part
903f7bca PP	70	* of dev_add() mgmtdev ops callback before invoking _vdpa_register_device().
961e9c84 JW	71	*/
	72	struct vdpa_device {
	73	struct device dev;
	74	struct device *dma_dev;
	75	const struct vdpa_config_ops *config;
	76	unsigned int index;
452639a6	77	bool features_valid;
a9974489	78	int nvqs;
903f7bca	79	struct vdpa_mgmt_dev *mdev;
961e9c84 JW	80	};
961e9c84 JW	81
3f1b623a	82	/**
d0f9164e	83	* struct vdpa_iova_range - the IOVA range support by the device
3f1b623a JW	84	* @first: start of the IOVA range
	85	* @last: end of the IOVA range
	86	*/
	87	struct vdpa_iova_range {
	88	u64 first;
	89	u64 last;
	90	};
	91
961e9c84	92	/**
d0f9164e	93	* struct vdpa_config_ops - operations for configuring a vDPA device.
961e9c84 JW	94	* Note: vDPA device drivers are required to implement all of the
	95	* operations unless it is mentioned to be optional in the following
	96	* list.
	97	*
	98	* @set_vq_address: Set the address of virtqueue
	99	* @vdev: vdpa device
	100	* @idx: virtqueue index
	101	* @desc_area: address of desc area
	102	* @driver_area: address of driver area
	103	* @device_area: address of device area
	104	* Returns integer: success (0) or error (< 0)
	105	* @set_vq_num: Set the size of virtqueue
	106	* @vdev: vdpa device
	107	* @idx: virtqueue index
	108	* @num: the size of virtqueue
	109	* @kick_vq: Kick the virtqueue
	110	* @vdev: vdpa device
	111	* @idx: virtqueue index
	112	* @set_vq_cb: Set the interrupt callback function for
	113	* a virtqueue
	114	* @vdev: vdpa device
	115	* @idx: virtqueue index
	116	* @cb: virtio-vdev interrupt callback structure
	117	* @set_vq_ready: Set ready status for a virtqueue
	118	* @vdev: vdpa device
	119	* @idx: virtqueue index
	120	* @ready: ready (true) not ready(false)
	121	* @get_vq_ready: Get ready status for a virtqueue
	122	* @vdev: vdpa device
	123	* @idx: virtqueue index
	124	* Returns boolean: ready (true) or not (false)
	125	* @set_vq_state: Set the state for a virtqueue
	126	* @vdev: vdpa device
	127	* @idx: virtqueue index
aac50c0b	128	* @state: pointer to set virtqueue state (last_avail_idx)
961e9c84 JW	129	* Returns integer: success (0) or error (< 0)
	130	* @get_vq_state: Get the state for a virtqueue
	131	* @vdev: vdpa device
	132	* @idx: virtqueue index
aac50c0b	133	* @state: pointer to returned state (last_avail_idx)
c25a26e6 JW	134	* @get_vq_notification: Get the notification area for a virtqueue
	135	* @vdev: vdpa device
	136	* @idx: virtqueue index
	137	* Returns the notifcation area
7164675a ZL	138	* @get_vq_irq: Get the irq number of a virtqueue (optional,
	139	* but must implemented if require vq irq offloading)
	140	* @vdev: vdpa device
	141	* @idx: virtqueue index
	142	* Returns int: irq number of a virtqueue,
	143	* negative number if no irq assigned.
961e9c84 JW	144	* @get_vq_align: Get the virtqueue align requirement
	145	* for the device
	146	* @vdev: vdpa device
	147	* Returns virtqueue algin requirement
	148	* @get_features: Get virtio features supported by the device
	149	* @vdev: vdpa device
	150	* Returns the virtio features support by the
	151	* device
	152	* @set_features: Set virtio features supported by the driver
	153	* @vdev: vdpa device
	154	* @features: feature support by the driver
	155	* Returns integer: success (0) or error (< 0)
	156	* @set_config_cb: Set the config interrupt callback
	157	* @vdev: vdpa device
	158	* @cb: virtio-vdev interrupt callback structure
	159	* @get_vq_num_max: Get the max size of virtqueue
	160	* @vdev: vdpa device
	161	* Returns u16: max size of virtqueue
	162	* @get_device_id: Get virtio device id
	163	* @vdev: vdpa device
	164	* Returns u32: virtio device id
	165	* @get_vendor_id: Get id for the vendor that provides this device
	166	* @vdev: vdpa device
	167	* Returns u32: virtio vendor id
	168	* @get_status: Get the device status
	169	* @vdev: vdpa device
	170	* Returns u8: virtio device status
	171	* @set_status: Set the device status
	172	* @vdev: vdpa device
	173	* @status: virtio device status
442706f9 SG	174	* @get_config_size: Get the size of the configuration space
	175	* @vdev: vdpa device
	176	* Returns size_t: configuration size
961e9c84 JW	177	* @get_config: Read from device specific configuration space
	178	* @vdev: vdpa device
	179	* @offset: offset from the beginning of
	180	* configuration space
	181	* @buf: buffer used to read to
	182	* @len: the length to read from
	183	* configuration space
	184	* @set_config: Write to device specific configuration space
	185	* @vdev: vdpa device
	186	* @offset: offset from the beginning of
	187	* configuration space
	188	* @buf: buffer used to write from
	189	* @len: the length to write to
	190	* configuration space
	191	* @get_generation: Get device config generation (optional)
	192	* @vdev: vdpa device
	193	* Returns u32: device generation
3f1b623a JW	194	* @get_iova_range: Get supported iova range (optional)
	195	* @vdev: vdpa device
	196	* Returns the iova range supported by
	197	* the device.
961e9c84 JW	198	* @set_map: Set device memory mapping (optional)
	199	* Needed for device that using device
	200	* specific DMA translation (on-chip IOMMU)
	201	* @vdev: vdpa device
	202	* @iotlb: vhost memory mapping to be
	203	* used by the vDPA
	204	* Returns integer: success (0) or error (< 0)
	205	* @dma_map: Map an area of PA to IOVA (optional)
	206	* Needed for device that using device
	207	* specific DMA translation (on-chip IOMMU)
	208	* and preferring incremental map.
	209	* @vdev: vdpa device
	210	* @iova: iova to be mapped
	211	* @size: size of the area
	212	* @pa: physical address for the map
	213	* @perm: device access permission (VHOST_MAP_XX)
	214	* Returns integer: success (0) or error (< 0)
	215	* @dma_unmap: Unmap an area of IOVA (optional but
	216	* must be implemented with dma_map)
	217	* Needed for device that using device
	218	* specific DMA translation (on-chip IOMMU)
	219	* and preferring incremental unmap.
	220	* @vdev: vdpa device
	221	* @iova: iova to be unmapped
	222	* @size: size of the area
	223	* Returns integer: success (0) or error (< 0)
	224	* @free: Free resources that belongs to vDPA (optional)
	225	* @vdev: vdpa device
	226	*/
	227	struct vdpa_config_ops {
	228	/* Virtqueue ops */
	229	int (set_vq_address)(struct vdpa_device vdev,
	230	u16 idx, u64 desc_area, u64 driver_area,
	231	u64 device_area);
	232	void (set_vq_num)(struct vdpa_device vdev, u16 idx, u32 num);
	233	void (kick_vq)(struct vdpa_device vdev, u16 idx);
	234	void (set_vq_cb)(struct vdpa_device vdev, u16 idx,
	235	struct vdpa_callback *cb);
	236	void (set_vq_ready)(struct vdpa_device vdev, u16 idx, bool ready);
	237	bool (get_vq_ready)(struct vdpa_device vdev, u16 idx);
aac50c0b EC	238	int (set_vq_state)(struct vdpa_device vdev, u16 idx,
aac50c0b EC	239	const struct vdpa_vq_state *state);
23750e39 EC	240	int (get_vq_state)(struct vdpa_device vdev, u16 idx,
23750e39 EC	241	struct vdpa_vq_state *state);
c25a26e6 JW	242	struct vdpa_notification_area
c25a26e6 JW	243	(get_vq_notification)(struct vdpa_device vdev, u16 idx);
4c05433b	244	/* vq irq is not expected to be changed once DRIVER_OK is set */
7164675a	245	int (get_vq_irq)(struct vdpa_device vdv, u16 idx);
961e9c84 JW	246
961e9c84 JW	247	/* Device ops */
425a5070	248	u32 (get_vq_align)(struct vdpa_device vdev);
961e9c84 JW	249	u64 (get_features)(struct vdpa_device vdev);
	250	int (set_features)(struct vdpa_device vdev, u64 features);
	251	void (set_config_cb)(struct vdpa_device vdev,
	252	struct vdpa_callback *cb);
	253	u16 (get_vq_num_max)(struct vdpa_device vdev);
	254	u32 (get_device_id)(struct vdpa_device vdev);
	255	u32 (get_vendor_id)(struct vdpa_device vdev);
	256	u8 (get_status)(struct vdpa_device vdev);
	257	void (set_status)(struct vdpa_device vdev, u8 status);
442706f9	258	size_t (get_config_size)(struct vdpa_device vdev);
961e9c84 JW	259	void (get_config)(struct vdpa_device vdev, unsigned int offset,
	260	void *buf, unsigned int len);
	261	void (set_config)(struct vdpa_device vdev, unsigned int offset,
	262	const void *buf, unsigned int len);
	263	u32 (get_generation)(struct vdpa_device vdev);
3f1b623a	264	struct vdpa_iova_range (get_iova_range)(struct vdpa_device vdev);
961e9c84 JW	265
	266	/* DMA ops */
	267	int (set_map)(struct vdpa_device vdev, struct vhost_iotlb *iotlb);
	268	int (dma_map)(struct vdpa_device vdev, u64 iova, u64 size,
	269	u64 pa, u32 perm);
	270	int (dma_unmap)(struct vdpa_device vdev, u64 iova, u64 size);
	271
	272	/* Free device resources */
	273	void (free)(struct vdpa_device vdev);
	274	};
	275
	276	struct vdpa_device __vdpa_alloc_device(struct device parent,
	277	const struct vdpa_config_ops *config,
f00bdce0	278	size_t size, const char *name);
961e9c84	279
c8d182bd XY	280	/**
	281	* vdpa_alloc_device - allocate and initilaize a vDPA device
	282	*
	283	* @dev_struct: the type of the parent structure
	284	* @member: the name of struct vdpa_device within the @dev_struct
	285	* @parent: the parent device
	286	* @config: the bus operations that is supported by this device
	287	* @name: name of the vdpa device
	288	*
	289	* Return allocated data structure or ERR_PTR upon error
	290	*/
f00bdce0	291	#define vdpa_alloc_device(dev_struct, member, parent, config, name) \
961e9c84	292	container_of(__vdpa_alloc_device( \
f00bdce0	293	parent, config, \
961e9c84 JW	294	sizeof(dev_struct) + \
961e9c84 JW	295	BUILD_BUG_ON_ZERO(offsetof( \
fd70a406	296	dev_struct, member)), name), \
961e9c84 JW	297	dev_struct, member)
961e9c84 JW	298
f00bdce0	299	int vdpa_register_device(struct vdpa_device *vdev, int nvqs);
961e9c84 JW	300	void vdpa_unregister_device(struct vdpa_device *vdev);
961e9c84 JW	301
f00bdce0	302	int _vdpa_register_device(struct vdpa_device *vdev, int nvqs);
903f7bca PP	303	void _vdpa_unregister_device(struct vdpa_device *vdev);
903f7bca PP	304
961e9c84	305	/**
d0f9164e	306	* struct vdpa_driver - operations for a vDPA driver
961e9c84 JW	307	* @driver: underlying device driver
	308	* @probe: the function to call when a device is found. Returns 0 or -errno.
	309	* @remove: the function to call when a device is removed.
	310	*/
	311	struct vdpa_driver {
	312	struct device_driver driver;
	313	int (probe)(struct vdpa_device vdev);
	314	void (remove)(struct vdpa_device vdev);
	315	};
	316
	317	#define vdpa_register_driver(drv) \
	318	__vdpa_register_driver(drv, THIS_MODULE)
	319	int __vdpa_register_driver(struct vdpa_driver drv, struct module owner);
	320	void vdpa_unregister_driver(struct vdpa_driver *drv);
	321
	322	#define module_vdpa_driver(__vdpa_driver) \
	323	module_driver(__vdpa_driver, vdpa_register_driver, \
	324	vdpa_unregister_driver)
	325
	326	static inline struct vdpa_driver drv_to_vdpa(struct device_driver driver)
	327	{
	328	return container_of(driver, struct vdpa_driver, driver);
	329	}
	330
	331	static inline struct vdpa_device dev_to_vdpa(struct device _dev)
	332	{
	333	return container_of(_dev, struct vdpa_device, dev);
	334	}
	335
	336	static inline void vdpa_get_drvdata(const struct vdpa_device vdev)
	337	{
	338	return dev_get_drvdata(&vdev->dev);
	339	}
	340
	341	static inline void vdpa_set_drvdata(struct vdpa_device vdev, void data)
	342	{
	343	dev_set_drvdata(&vdev->dev, data);
	344	}
	345
	346	static inline struct device vdpa_get_dma_dev(struct vdpa_device vdev)
	347	{
	348	return vdev->dma_dev;
	349	}
452639a6 MT	350
	351	static inline void vdpa_reset(struct vdpa_device *vdev)
	352	{
	353	const struct vdpa_config_ops *ops = vdev->config;
	354
	355	vdev->features_valid = false;
	356	ops->set_status(vdev, 0);
	357	}
	358
	359	static inline int vdpa_set_features(struct vdpa_device *vdev, u64 features)
	360	{
	361	const struct vdpa_config_ops *ops = vdev->config;
	362
	363	vdev->features_valid = true;
	364	return ops->set_features(vdev, features);
	365	}
	366
	367
	368	static inline void vdpa_get_config(struct vdpa_device *vdev, unsigned offset,
	369	void *buf, unsigned int len)
	370	{
	371	const struct vdpa_config_ops *ops = vdev->config;
	372
	373	/*
	374	* Config accesses aren't supposed to trigger before features are set.
	375	* If it does happen we assume a legacy guest.
	376	*/
	377	if (!vdev->features_valid)
	378	vdpa_set_features(vdev, 0);
	379	ops->get_config(vdev, offset, buf, len);
	380	}
	381
33b34750	382	/**
d0f9164e PP	383	* struct vdpa_mgmtdev_ops - vdpa device ops
	384	* @dev_add: Add a vdpa device using alloc and register
	385	* @mdev: parent device to use for device addition
	386	* @name: name of the new vdpa device
	387	* Driver need to add a new device using _vdpa_register_device()
	388	* after fully initializing the vdpa device. Driver must return 0
	389	* on success or appropriate error code.
	390	* @dev_del: Remove a vdpa device using unregister
	391	* @mdev: parent device to use for device removal
	392	* @dev: vdpa device to remove
	393	* Driver need to remove the specified device by calling
	394	* _vdpa_unregister_device().
33b34750 PP	395	*/
	396	struct vdpa_mgmtdev_ops {
	397	int (dev_add)(struct vdpa_mgmt_dev mdev, const char *name);
	398	void (dev_del)(struct vdpa_mgmt_dev mdev, struct vdpa_device *dev);
	399	};
	400
	401	struct vdpa_mgmt_dev {
	402	struct device *device;
	403	const struct vdpa_mgmtdev_ops *ops;
	404	const struct virtio_device_id id_table; / supported ids */
	405	struct list_head list;
	406	};
	407
	408	int vdpa_mgmtdev_register(struct vdpa_mgmt_dev *mdev);
	409	void vdpa_mgmtdev_unregister(struct vdpa_mgmt_dev *mdev);
	410
961e9c84	411	#endif /* _LINUX_VDPA_H */