Commit | Line | Data |
---|---|---|
4808a1c0 OK |
1 | |
2 | /* | |
3 | * Board initialization code should put one of these into dev->platform_data | |
4 | * and place the isp116x onto platform_bus. | |
5 | */ | |
6 | ||
7 | struct isp116x_platform_data { | |
8 | /* Enable internal resistors on downstream ports */ | |
9 | unsigned sel15Kres:1; | |
9d233d9f | 10 | /* On-chip overcurrent detection */ |
4808a1c0 OK |
11 | unsigned oc_enable:1; |
12 | /* INT output polarity */ | |
13 | unsigned int_act_high:1; | |
14 | /* INT edge or level triggered */ | |
15 | unsigned int_edge_triggered:1; | |
d4d62861 OK |
16 | /* Enable wakeup by devices on usb bus (e.g. wakeup |
17 | by attachment/detachment or by device activity | |
18 | such as moving a mouse). When chosen, this option | |
19 | prevents stopping internal clock, increasing | |
20 | thereby power consumption in suspended state. */ | |
4808a1c0 | 21 | unsigned remote_wakeup_enable:1; |
4808a1c0 OK |
22 | /* Inter-io delay (ns). The chip is picky about access timings; it |
23 | expects at least: | |
24 | 150ns delay between consecutive accesses to DATA_REG, | |
25 | 300ns delay between access to ADDR_REG and DATA_REG | |
26 | OE, WE MUST NOT be changed during these intervals | |
27 | */ | |
28 | void (*delay) (struct device * dev, int delay); | |
29 | }; |