Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Definitions for talking to the PMU. The PMU is a microcontroller | |
3 | * which controls battery charging and system power on PowerBook 3400 | |
4 | * and 2400 models as well as the RTC and various other things. | |
5 | * | |
6 | * Copyright (C) 1998 Paul Mackerras. | |
7 | */ | |
8 | ||
9 | #include <linux/config.h> | |
10 | ||
11 | #define PMU_DRIVER_VERSION 2 | |
12 | ||
13 | /* | |
14 | * PMU commands | |
15 | */ | |
16 | #define PMU_POWER_CTRL0 0x10 /* control power of some devices */ | |
17 | #define PMU_POWER_CTRL 0x11 /* control power of some devices */ | |
18 | #define PMU_ADB_CMD 0x20 /* send ADB packet */ | |
19 | #define PMU_ADB_POLL_OFF 0x21 /* disable ADB auto-poll */ | |
20 | #define PMU_WRITE_NVRAM 0x33 /* write non-volatile RAM */ | |
21 | #define PMU_READ_NVRAM 0x3b /* read non-volatile RAM */ | |
22 | #define PMU_SET_RTC 0x30 /* set real-time clock */ | |
23 | #define PMU_READ_RTC 0x38 /* read real-time clock */ | |
24 | #define PMU_SET_VOLBUTTON 0x40 /* set volume up/down position */ | |
25 | #define PMU_BACKLIGHT_BRIGHT 0x41 /* set backlight brightness */ | |
26 | #define PMU_GET_VOLBUTTON 0x48 /* get volume up/down position */ | |
27 | #define PMU_PCEJECT 0x4c /* eject PC-card from slot */ | |
28 | #define PMU_BATTERY_STATE 0x6b /* report battery state etc. */ | |
29 | #define PMU_SMART_BATTERY_STATE 0x6f /* report battery state (new way) */ | |
30 | #define PMU_SET_INTR_MASK 0x70 /* set PMU interrupt mask */ | |
31 | #define PMU_INT_ACK 0x78 /* read interrupt bits */ | |
32 | #define PMU_SHUTDOWN 0x7e /* turn power off */ | |
33 | #define PMU_CPU_SPEED 0x7d /* control CPU speed on some models */ | |
34 | #define PMU_SLEEP 0x7f /* put CPU to sleep */ | |
35 | #define PMU_POWER_EVENTS 0x8f /* Send power-event commands to PMU */ | |
36 | #define PMU_I2C_CMD 0x9a /* I2C operations */ | |
37 | #define PMU_RESET 0xd0 /* reset CPU */ | |
38 | #define PMU_GET_BRIGHTBUTTON 0xd9 /* report brightness up/down pos */ | |
39 | #define PMU_GET_COVER 0xdc /* report cover open/closed */ | |
40 | #define PMU_SYSTEM_READY 0xdf /* tell PMU we are awake */ | |
41 | #define PMU_GET_VERSION 0xea /* read the PMU version */ | |
42 | ||
43 | /* Bits to use with the PMU_POWER_CTRL0 command */ | |
44 | #define PMU_POW0_ON 0x80 /* OR this to power ON the device */ | |
45 | #define PMU_POW0_OFF 0x00 /* leave bit 7 to 0 to power it OFF */ | |
46 | #define PMU_POW0_HARD_DRIVE 0x04 /* Hard drive power (on wallstreet/lombard ?) */ | |
47 | ||
48 | /* Bits to use with the PMU_POWER_CTRL command */ | |
49 | #define PMU_POW_ON 0x80 /* OR this to power ON the device */ | |
50 | #define PMU_POW_OFF 0x00 /* leave bit 7 to 0 to power it OFF */ | |
51 | #define PMU_POW_BACKLIGHT 0x01 /* backlight power */ | |
52 | #define PMU_POW_CHARGER 0x02 /* battery charger power */ | |
53 | #define PMU_POW_IRLED 0x04 /* IR led power (on wallstreet) */ | |
54 | #define PMU_POW_MEDIABAY 0x08 /* media bay power (wallstreet/lombard ?) */ | |
55 | ||
56 | /* Bits in PMU interrupt and interrupt mask bytes */ | |
57 | #define PMU_INT_PCEJECT 0x04 /* PC-card eject buttons */ | |
58 | #define PMU_INT_SNDBRT 0x08 /* sound/brightness up/down buttons */ | |
59 | #define PMU_INT_ADB 0x10 /* ADB autopoll or reply data */ | |
60 | #define PMU_INT_BATTERY 0x20 /* Battery state change */ | |
61 | #define PMU_INT_ENVIRONMENT 0x40 /* Environment interrupts */ | |
62 | #define PMU_INT_TICK 0x80 /* 1-second tick interrupt */ | |
63 | ||
64 | /* Other bits in PMU interrupt valid when PMU_INT_ADB is set */ | |
65 | #define PMU_INT_ADB_AUTO 0x04 /* ADB autopoll, when PMU_INT_ADB */ | |
66 | #define PMU_INT_WAITING_CHARGER 0x01 /* ??? */ | |
67 | #define PMU_INT_AUTO_SRQ_POLL 0x02 /* ??? */ | |
68 | ||
69 | /* Bits in the environement message (either obtained via PMU_GET_COVER, | |
70 | * or via PMU_INT_ENVIRONMENT on core99 */ | |
71 | #define PMU_ENV_LID_CLOSED 0x01 /* The lid is closed */ | |
72 | ||
73 | /* I2C related definitions */ | |
74 | #define PMU_I2C_MODE_SIMPLE 0 | |
75 | #define PMU_I2C_MODE_STDSUB 1 | |
76 | #define PMU_I2C_MODE_COMBINED 2 | |
77 | ||
78 | #define PMU_I2C_BUS_STATUS 0 | |
79 | #define PMU_I2C_BUS_SYSCLK 1 | |
80 | #define PMU_I2C_BUS_POWER 2 | |
81 | ||
82 | #define PMU_I2C_STATUS_OK 0 | |
83 | #define PMU_I2C_STATUS_DATAREAD 1 | |
84 | #define PMU_I2C_STATUS_BUSY 0xfe | |
85 | ||
86 | ||
87 | /* Kind of PMU (model) */ | |
88 | enum { | |
89 | PMU_UNKNOWN, | |
90 | PMU_OHARE_BASED, /* 2400, 3400, 3500 (old G3 powerbook) */ | |
91 | PMU_HEATHROW_BASED, /* PowerBook G3 series */ | |
92 | PMU_PADDINGTON_BASED, /* 1999 PowerBook G3 */ | |
93 | PMU_KEYLARGO_BASED, /* Core99 motherboard (PMU99) */ | |
94 | PMU_68K_V1, /* 68K PMU, version 1 */ | |
95 | PMU_68K_V2, /* 68K PMU, version 2 */ | |
96 | }; | |
97 | ||
98 | /* PMU PMU_POWER_EVENTS commands */ | |
99 | enum { | |
100 | PMU_PWR_GET_POWERUP_EVENTS = 0x00, | |
101 | PMU_PWR_SET_POWERUP_EVENTS = 0x01, | |
102 | PMU_PWR_CLR_POWERUP_EVENTS = 0x02, | |
103 | PMU_PWR_GET_WAKEUP_EVENTS = 0x03, | |
104 | PMU_PWR_SET_WAKEUP_EVENTS = 0x04, | |
105 | PMU_PWR_CLR_WAKEUP_EVENTS = 0x05, | |
106 | }; | |
107 | ||
108 | /* Power events wakeup bits */ | |
109 | enum { | |
110 | PMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */ | |
111 | PMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */ | |
112 | PMU_PWR_WAKEUP_AC_CHANGE = 0x04, | |
113 | PMU_PWR_WAKEUP_LID_OPEN = 0x08, | |
114 | PMU_PWR_WAKEUP_RING = 0x10, | |
115 | }; | |
116 | ||
117 | /* | |
118 | * Ioctl commands for the /dev/pmu device | |
119 | */ | |
120 | #include <linux/ioctl.h> | |
121 | ||
122 | /* no param */ | |
123 | #define PMU_IOC_SLEEP _IO('B', 0) | |
124 | /* out param: u32* backlight value: 0 to 15 */ | |
125 | #define PMU_IOC_GET_BACKLIGHT _IOR('B', 1, size_t) | |
126 | /* in param: u32 backlight value: 0 to 15 */ | |
127 | #define PMU_IOC_SET_BACKLIGHT _IOW('B', 2, size_t) | |
128 | /* out param: u32* PMU model */ | |
129 | #define PMU_IOC_GET_MODEL _IOR('B', 3, size_t) | |
130 | /* out param: u32* has_adb: 0 or 1 */ | |
131 | #define PMU_IOC_HAS_ADB _IOR('B', 4, size_t) | |
132 | /* out param: u32* can_sleep: 0 or 1 */ | |
133 | #define PMU_IOC_CAN_SLEEP _IOR('B', 5, size_t) | |
134 | /* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */ | |
135 | #define PMU_IOC_GRAB_BACKLIGHT _IOR('B', 6, size_t) | |
136 | ||
137 | #ifdef __KERNEL__ | |
138 | ||
139 | extern int find_via_pmu(void); | |
140 | ||
141 | extern int pmu_request(struct adb_request *req, | |
142 | void (*done)(struct adb_request *), int nbytes, ...); | |
143 | ||
144 | extern void pmu_poll(void); | |
145 | extern void pmu_poll_adb(void); /* For use by xmon */ | |
146 | extern void pmu_wait_complete(struct adb_request *req); | |
147 | ||
148 | /* For use before switching interrupts off for a long time; | |
149 | * warning: not stackable | |
150 | */ | |
151 | extern void pmu_suspend(void); | |
152 | extern void pmu_resume(void); | |
153 | ||
154 | extern void pmu_enable_irled(int on); | |
155 | ||
156 | extern void pmu_restart(void); | |
157 | extern void pmu_shutdown(void); | |
158 | extern void pmu_unlock(void); | |
159 | ||
160 | extern int pmu_present(void); | |
161 | extern int pmu_get_model(void); | |
162 | ||
163 | extern int pmu_i2c_combined_read(int bus, int addr, int subaddr, u8* data, int len); | |
164 | extern int pmu_i2c_stdsub_write(int bus, int addr, int subaddr, u8* data, int len); | |
165 | extern int pmu_i2c_simple_read(int bus, int addr, u8* data, int len); | |
166 | extern int pmu_i2c_simple_write(int bus, int addr, u8* data, int len); | |
167 | ||
168 | ||
8c870933 | 169 | #ifdef CONFIG_PM |
1da177e4 LT |
170 | /* |
171 | * Stuff for putting the powerbook to sleep and waking it again. | |
172 | * | |
173 | */ | |
174 | #include <linux/list.h> | |
175 | ||
176 | struct pmu_sleep_notifier | |
177 | { | |
178 | int (*notifier_call)(struct pmu_sleep_notifier *self, int when); | |
179 | int priority; | |
180 | struct list_head list; | |
181 | }; | |
182 | ||
183 | /* Code values for calling sleep/wakeup handlers | |
184 | * | |
185 | * Note: If a sleep request got cancelled, all drivers will get | |
186 | * the PBOOK_SLEEP_REJECT, even those who didn't get the PBOOK_SLEEP_REQUEST. | |
187 | */ | |
188 | #define PBOOK_SLEEP_REQUEST 1 | |
189 | #define PBOOK_SLEEP_NOW 2 | |
190 | #define PBOOK_SLEEP_REJECT 3 | |
191 | #define PBOOK_WAKE 4 | |
192 | ||
193 | /* Result codes returned by the notifiers */ | |
194 | #define PBOOK_SLEEP_OK 0 | |
195 | #define PBOOK_SLEEP_REFUSE -1 | |
196 | ||
197 | /* priority levels in notifiers */ | |
198 | #define SLEEP_LEVEL_VIDEO 100 /* Video driver (first wake) */ | |
199 | #define SLEEP_LEVEL_MEDIABAY 90 /* Media bay driver */ | |
200 | #define SLEEP_LEVEL_BLOCK 80 /* IDE, SCSI */ | |
201 | #define SLEEP_LEVEL_NET 70 /* bmac, gmac */ | |
202 | #define SLEEP_LEVEL_MISC 60 /* Anything else */ | |
203 | #define SLEEP_LEVEL_USERLAND 55 /* Reserved for apm_emu */ | |
204 | #define SLEEP_LEVEL_ADB 50 /* ADB (async) */ | |
205 | #define SLEEP_LEVEL_SOUND 40 /* Sound driver (blocking) */ | |
206 | ||
207 | /* special register notifier functions */ | |
208 | int pmu_register_sleep_notifier(struct pmu_sleep_notifier* notifier); | |
209 | int pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* notifier); | |
210 | ||
8c870933 BH |
211 | #endif /* CONFIG_PM */ |
212 | ||
1da177e4 LT |
213 | #define PMU_MAX_BATTERIES 2 |
214 | ||
215 | /* values for pmu_power_flags */ | |
216 | #define PMU_PWR_AC_PRESENT 0x00000001 | |
217 | ||
218 | /* values for pmu_battery_info.flags */ | |
219 | #define PMU_BATT_PRESENT 0x00000001 | |
220 | #define PMU_BATT_CHARGING 0x00000002 | |
221 | #define PMU_BATT_TYPE_MASK 0x000000f0 | |
222 | #define PMU_BATT_TYPE_SMART 0x00000010 /* Smart battery */ | |
223 | #define PMU_BATT_TYPE_HOOPER 0x00000020 /* 3400/3500 */ | |
224 | #define PMU_BATT_TYPE_COMET 0x00000030 /* 2400 */ | |
225 | ||
226 | struct pmu_battery_info | |
227 | { | |
228 | unsigned int flags; | |
229 | unsigned int charge; /* current charge */ | |
230 | unsigned int max_charge; /* maximum charge */ | |
231 | signed int amperage; /* current, positive if charging */ | |
232 | unsigned int voltage; /* voltage */ | |
233 | unsigned int time_remaining; /* remaining time */ | |
234 | }; | |
235 | ||
236 | extern int pmu_battery_count; | |
237 | extern struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES]; | |
238 | extern unsigned int pmu_power_flags; | |
239 | ||
1da177e4 | 240 | #endif /* __KERNEL__ */ |