Commit | Line | Data |
---|---|---|
704232c2 JB |
1 | #ifndef __LINUX_NL80211_H |
2 | #define __LINUX_NL80211_H | |
3 | /* | |
4 | * 802.11 netlink interface public header | |
5 | * | |
6 | * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net> | |
7 | */ | |
8 | ||
5727ef1b JB |
9 | /** |
10 | * DOC: Station handling | |
11 | * | |
12 | * Stations are added per interface, but a special case exists with VLAN | |
13 | * interfaces. When a station is bound to an AP interface, it may be moved | |
14 | * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). | |
15 | * The station is still assumed to belong to the AP interface it was added | |
16 | * to. | |
17 | * | |
18 | * TODO: need more info? | |
19 | */ | |
20 | ||
55682965 JB |
21 | /** |
22 | * enum nl80211_commands - supported nl80211 commands | |
23 | * | |
24 | * @NL80211_CMD_UNSPEC: unspecified command to catch errors | |
25 | * | |
26 | * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request | |
27 | * to get a list of all present wiphys. | |
31888487 JM |
28 | * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or |
29 | * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME | |
30 | * and/or %NL80211_ATTR_WIPHY_TXQ_PARAMS. | |
55682965 JB |
31 | * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request |
32 | * or rename notification. Has attributes %NL80211_ATTR_WIPHY and | |
33 | * %NL80211_ATTR_WIPHY_NAME. | |
34 | * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes | |
35 | * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. | |
36 | * | |
37 | * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; | |
38 | * either a dump request on a %NL80211_ATTR_WIPHY or a specific get | |
39 | * on an %NL80211_ATTR_IFINDEX is supported. | |
40 | * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires | |
41 | * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. | |
42 | * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response | |
43 | * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, | |
44 | * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also | |
45 | * be sent from userspace to request creation of a new virtual interface, | |
46 | * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and | |
47 | * %NL80211_ATTR_IFNAME. | |
48 | * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes | |
49 | * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from | |
50 | * userspace to request deletion of a virtual interface, then requires | |
51 | * attribute %NL80211_ATTR_IFINDEX. | |
52 | * | |
41ade00f JB |
53 | * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified |
54 | * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. | |
55 | * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT or | |
56 | * %NL80211_ATTR_KEY_THRESHOLD. | |
57 | * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, | |
58 | * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER | |
59 | * attributes. | |
60 | * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX | |
61 | * or %NL80211_ATTR_MAC. | |
62 | * | |
ed1b6cc7 JB |
63 | * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a |
64 | * %NL80222_CMD_NEW_BEACON message) | |
65 | * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface | |
66 | * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, | |
67 | * %NL80211_BEACON_HEAD and %NL80211_BEACON_TAIL attributes. | |
68 | * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, | |
69 | * parameters are like for %NL80211_CMD_SET_BEACON. | |
70 | * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it | |
71 | * | |
5727ef1b JB |
72 | * @NL80211_CMD_GET_STATION: Get station attributes for station identified by |
73 | * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. | |
74 | * @NL80211_CMD_SET_STATION: Set station attributes for station identified by | |
75 | * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. | |
76 | * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the | |
77 | * the interface identified by %NL80211_ATTR_IFINDEX. | |
78 | * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC | |
79 | * or, if no MAC address given, all stations, on the interface identified | |
80 | * by %NL80211_ATTR_IFINDEX. | |
81 | * | |
2ec600d6 LCC |
82 | * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to |
83 | * destination %NL80211_ATTR_MAC on the interface identified by | |
84 | * %NL80211_ATTR_IFINDEX. | |
85 | * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to | |
86 | * destination %NL80211_ATTR_MAC on the interface identified by | |
87 | * %NL80211_ATTR_IFINDEX. | |
88 | * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the | |
89 | * the interface identified by %NL80211_ATTR_IFINDEX. | |
90 | * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC | |
91 | * or, if no MAC address given, all mesh paths, on the interface identified | |
92 | * by %NL80211_ATTR_IFINDEX. | |
9f1ba906 JM |
93 | * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by |
94 | * %NL80211_ATTR_IFINDEX. | |
2ec600d6 | 95 | * |
b2e1b302 LR |
96 | * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command |
97 | * after being queried by the kernel. CRDA replies by sending a regulatory | |
98 | * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our | |
99 | * current alpha2 if it found a match. It also provides | |
100 | * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each | |
101 | * regulatory rule is a nested set of attributes given by | |
102 | * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and | |
103 | * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by | |
104 | * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and | |
105 | * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. | |
106 | * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain | |
107 | * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will | |
108 | * store this as a valid request and then query userspace for it. | |
109 | * | |
93da9cc1 | 110 | * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the |
111 | * interface identified by %NL80211_ATTR_IFINDEX | |
112 | * | |
113 | * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the | |
114 | * interface identified by %NL80211_ATTR_IFINDEX | |
115 | * | |
55682965 JB |
116 | * @NL80211_CMD_MAX: highest used command number |
117 | * @__NL80211_CMD_AFTER_LAST: internal use | |
118 | */ | |
119 | enum nl80211_commands { | |
120 | /* don't change the order or add anything inbetween, this is ABI! */ | |
121 | NL80211_CMD_UNSPEC, | |
122 | ||
123 | NL80211_CMD_GET_WIPHY, /* can dump */ | |
124 | NL80211_CMD_SET_WIPHY, | |
125 | NL80211_CMD_NEW_WIPHY, | |
126 | NL80211_CMD_DEL_WIPHY, | |
127 | ||
128 | NL80211_CMD_GET_INTERFACE, /* can dump */ | |
129 | NL80211_CMD_SET_INTERFACE, | |
130 | NL80211_CMD_NEW_INTERFACE, | |
131 | NL80211_CMD_DEL_INTERFACE, | |
132 | ||
41ade00f JB |
133 | NL80211_CMD_GET_KEY, |
134 | NL80211_CMD_SET_KEY, | |
135 | NL80211_CMD_NEW_KEY, | |
136 | NL80211_CMD_DEL_KEY, | |
137 | ||
ed1b6cc7 JB |
138 | NL80211_CMD_GET_BEACON, |
139 | NL80211_CMD_SET_BEACON, | |
140 | NL80211_CMD_NEW_BEACON, | |
141 | NL80211_CMD_DEL_BEACON, | |
142 | ||
5727ef1b JB |
143 | NL80211_CMD_GET_STATION, |
144 | NL80211_CMD_SET_STATION, | |
145 | NL80211_CMD_NEW_STATION, | |
146 | NL80211_CMD_DEL_STATION, | |
147 | ||
2ec600d6 LCC |
148 | NL80211_CMD_GET_MPATH, |
149 | NL80211_CMD_SET_MPATH, | |
150 | NL80211_CMD_NEW_MPATH, | |
151 | NL80211_CMD_DEL_MPATH, | |
152 | ||
9f1ba906 JM |
153 | NL80211_CMD_SET_BSS, |
154 | ||
b2e1b302 LR |
155 | NL80211_CMD_SET_REG, |
156 | NL80211_CMD_REQ_SET_REG, | |
157 | ||
93da9cc1 | 158 | NL80211_CMD_GET_MESH_PARAMS, |
159 | NL80211_CMD_SET_MESH_PARAMS, | |
160 | ||
b2e1b302 | 161 | /* add new commands above here */ |
564d9bdd | 162 | |
55682965 JB |
163 | /* used to define NL80211_CMD_MAX below */ |
164 | __NL80211_CMD_AFTER_LAST, | |
165 | NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 | |
166 | }; | |
167 | ||
9f1ba906 JM |
168 | /* |
169 | * Allow user space programs to use #ifdef on new commands by defining them | |
170 | * here | |
171 | */ | |
172 | #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS | |
55682965 JB |
173 | |
174 | /** | |
175 | * enum nl80211_attrs - nl80211 netlink attributes | |
176 | * | |
177 | * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors | |
178 | * | |
179 | * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. | |
180 | * /sys/class/ieee80211/<phyname>/index | |
181 | * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) | |
31888487 | 182 | * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters |
55682965 JB |
183 | * |
184 | * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on | |
185 | * @NL80211_ATTR_IFNAME: network interface name | |
186 | * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype | |
187 | * | |
41ade00f JB |
188 | * @NL80211_ATTR_MAC: MAC address (various uses) |
189 | * | |
190 | * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of | |
191 | * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC | |
192 | * keys | |
193 | * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) | |
194 | * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 | |
195 | * section 7.3.2.25.1, e.g. 0x000FAC04) | |
196 | * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and | |
197 | * CCMP keys, each six bytes in little endian | |
198 | * | |
ed1b6cc7 JB |
199 | * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU |
200 | * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing | |
201 | * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE | |
202 | * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE | |
203 | * | |
5727ef1b JB |
204 | * @NL80211_ATTR_STA_AID: Association ID for the station (u16) |
205 | * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of | |
206 | * &enum nl80211_sta_flags. | |
207 | * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by | |
208 | * IEEE 802.11 7.3.1.6 (u16). | |
209 | * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported | |
210 | * rates as defined by IEEE 802.11 7.3.2.2 but without the length | |
211 | * restriction (at most %NL80211_MAX_SUPP_RATES). | |
212 | * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station | |
213 | * to, or the AP interface the station was originally added to to. | |
2ec600d6 | 214 | * @NL80211_ATTR_STA_INFO: information about a station, part of station info |
fd5b74dc | 215 | * given for %NL80211_CMD_GET_STATION, nested attribute containing |
2ec600d6 | 216 | * info as possible, see &enum nl80211_sta_info. |
5727ef1b | 217 | * |
ee688b00 JB |
218 | * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, |
219 | * consisting of a nested array. | |
220 | * | |
2ec600d6 LCC |
221 | * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). |
222 | * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link. | |
223 | * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. | |
224 | * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path | |
225 | * info given for %NL80211_CMD_GET_MPATH, nested attribute described at | |
226 | * &enum nl80211_mpath_info. | |
227 | * | |
66f7ac50 MW |
228 | * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of |
229 | * &enum nl80211_mntr_flags. | |
230 | * | |
b2e1b302 LR |
231 | * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the |
232 | * current regulatory domain should be set to or is already set to. | |
233 | * For example, 'CR', for Costa Rica. This attribute is used by the kernel | |
234 | * to query the CRDA to retrieve one regulatory domain. This attribute can | |
235 | * also be used by userspace to query the kernel for the currently set | |
236 | * regulatory domain. We chose an alpha2 as that is also used by the | |
237 | * IEEE-802.11d country information element to identify a country. | |
238 | * Users can also simply ask the wireless core to set regulatory domain | |
239 | * to a specific alpha2. | |
240 | * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory | |
241 | * rules. | |
242 | * | |
9f1ba906 JM |
243 | * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) |
244 | * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled | |
245 | * (u8, 0 or 1) | |
246 | * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled | |
247 | * (u8, 0 or 1) | |
90c97a04 JM |
248 | * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic |
249 | * rates in format defined by IEEE 802.11 7.3.2.2 but without the length | |
250 | * restriction (at most %NL80211_MAX_SUPP_RATES). | |
9f1ba906 | 251 | * |
36aedc90 JM |
252 | * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from |
253 | * association request when used with NL80211_CMD_NEW_STATION) | |
254 | * | |
f59ac048 LR |
255 | * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all |
256 | * supported interface types, each a flag attribute with the number | |
257 | * of the interface mode. | |
258 | * | |
55682965 JB |
259 | * @NL80211_ATTR_MAX: highest attribute number currently defined |
260 | * @__NL80211_ATTR_AFTER_LAST: internal use | |
261 | */ | |
262 | enum nl80211_attrs { | |
263 | /* don't change the order or add anything inbetween, this is ABI! */ | |
264 | NL80211_ATTR_UNSPEC, | |
265 | ||
266 | NL80211_ATTR_WIPHY, | |
267 | NL80211_ATTR_WIPHY_NAME, | |
268 | ||
269 | NL80211_ATTR_IFINDEX, | |
270 | NL80211_ATTR_IFNAME, | |
271 | NL80211_ATTR_IFTYPE, | |
272 | ||
41ade00f JB |
273 | NL80211_ATTR_MAC, |
274 | ||
275 | NL80211_ATTR_KEY_DATA, | |
276 | NL80211_ATTR_KEY_IDX, | |
277 | NL80211_ATTR_KEY_CIPHER, | |
278 | NL80211_ATTR_KEY_SEQ, | |
279 | NL80211_ATTR_KEY_DEFAULT, | |
280 | ||
ed1b6cc7 JB |
281 | NL80211_ATTR_BEACON_INTERVAL, |
282 | NL80211_ATTR_DTIM_PERIOD, | |
283 | NL80211_ATTR_BEACON_HEAD, | |
284 | NL80211_ATTR_BEACON_TAIL, | |
285 | ||
5727ef1b JB |
286 | NL80211_ATTR_STA_AID, |
287 | NL80211_ATTR_STA_FLAGS, | |
288 | NL80211_ATTR_STA_LISTEN_INTERVAL, | |
289 | NL80211_ATTR_STA_SUPPORTED_RATES, | |
290 | NL80211_ATTR_STA_VLAN, | |
2ec600d6 | 291 | NL80211_ATTR_STA_INFO, |
5727ef1b | 292 | |
ee688b00 JB |
293 | NL80211_ATTR_WIPHY_BANDS, |
294 | ||
66f7ac50 MW |
295 | NL80211_ATTR_MNTR_FLAGS, |
296 | ||
2ec600d6 LCC |
297 | NL80211_ATTR_MESH_ID, |
298 | NL80211_ATTR_STA_PLINK_ACTION, | |
299 | NL80211_ATTR_MPATH_NEXT_HOP, | |
300 | NL80211_ATTR_MPATH_INFO, | |
301 | ||
9f1ba906 JM |
302 | NL80211_ATTR_BSS_CTS_PROT, |
303 | NL80211_ATTR_BSS_SHORT_PREAMBLE, | |
304 | NL80211_ATTR_BSS_SHORT_SLOT_TIME, | |
305 | ||
36aedc90 JM |
306 | NL80211_ATTR_HT_CAPABILITY, |
307 | ||
f59ac048 LR |
308 | NL80211_ATTR_SUPPORTED_IFTYPES, |
309 | ||
b2e1b302 LR |
310 | NL80211_ATTR_REG_ALPHA2, |
311 | NL80211_ATTR_REG_RULES, | |
312 | ||
93da9cc1 | 313 | NL80211_ATTR_MESH_PARAMS, |
314 | ||
90c97a04 JM |
315 | NL80211_ATTR_BSS_BASIC_RATES, |
316 | ||
31888487 JM |
317 | NL80211_ATTR_WIPHY_TXQ_PARAMS, |
318 | ||
564d9bdd MB |
319 | /* add attributes here, update the policy in nl80211.c */ |
320 | ||
55682965 JB |
321 | __NL80211_ATTR_AFTER_LAST, |
322 | NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 | |
323 | }; | |
324 | ||
36aedc90 JM |
325 | /* |
326 | * Allow user space programs to use #ifdef on new attributes by defining them | |
327 | * here | |
328 | */ | |
329 | #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY | |
90c97a04 | 330 | #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES |
31888487 | 331 | #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS |
36aedc90 | 332 | |
ffd7891d | 333 | #define NL80211_MAX_SUPP_RATES 32 |
b2e1b302 | 334 | #define NL80211_MAX_SUPP_REG_RULES 32 |
ffd7891d LR |
335 | #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 |
336 | #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 | |
337 | #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 | |
36aedc90 | 338 | #define NL80211_HT_CAPABILITY_LEN 26 |
5727ef1b | 339 | |
704232c2 JB |
340 | /** |
341 | * enum nl80211_iftype - (virtual) interface types | |
55682965 | 342 | * |
704232c2 JB |
343 | * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides |
344 | * @NL80211_IFTYPE_ADHOC: independent BSS member | |
345 | * @NL80211_IFTYPE_STATION: managed BSS member | |
346 | * @NL80211_IFTYPE_AP: access point | |
347 | * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points | |
348 | * @NL80211_IFTYPE_WDS: wireless distribution interface | |
349 | * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames | |
2ec600d6 | 350 | * @NL80211_IFTYPE_MESH_POINT: mesh point |
55682965 | 351 | * @NL80211_IFTYPE_MAX: highest interface type number currently defined |
704232c2 JB |
352 | * @__NL80211_IFTYPE_AFTER_LAST: internal use |
353 | * | |
55682965 | 354 | * These values are used with the %NL80211_ATTR_IFTYPE |
704232c2 JB |
355 | * to set the type of an interface. |
356 | * | |
357 | */ | |
358 | enum nl80211_iftype { | |
359 | NL80211_IFTYPE_UNSPECIFIED, | |
360 | NL80211_IFTYPE_ADHOC, | |
361 | NL80211_IFTYPE_STATION, | |
362 | NL80211_IFTYPE_AP, | |
363 | NL80211_IFTYPE_AP_VLAN, | |
364 | NL80211_IFTYPE_WDS, | |
365 | NL80211_IFTYPE_MONITOR, | |
2ec600d6 | 366 | NL80211_IFTYPE_MESH_POINT, |
704232c2 JB |
367 | |
368 | /* keep last */ | |
55682965 JB |
369 | __NL80211_IFTYPE_AFTER_LAST, |
370 | NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1 | |
704232c2 | 371 | }; |
704232c2 | 372 | |
5727ef1b JB |
373 | /** |
374 | * enum nl80211_sta_flags - station flags | |
375 | * | |
376 | * Station flags. When a station is added to an AP interface, it is | |
377 | * assumed to be already associated (and hence authenticated.) | |
378 | * | |
379 | * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) | |
380 | * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames | |
381 | * with short barker preamble | |
382 | * @NL80211_STA_FLAG_WME: station is WME/QoS capable | |
383 | */ | |
384 | enum nl80211_sta_flags { | |
385 | __NL80211_STA_FLAG_INVALID, | |
386 | NL80211_STA_FLAG_AUTHORIZED, | |
387 | NL80211_STA_FLAG_SHORT_PREAMBLE, | |
388 | NL80211_STA_FLAG_WME, | |
389 | ||
390 | /* keep last */ | |
391 | __NL80211_STA_FLAG_AFTER_LAST, | |
392 | NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 | |
393 | }; | |
394 | ||
fd5b74dc | 395 | /** |
2ec600d6 | 396 | * enum nl80211_sta_info - station information |
fd5b74dc | 397 | * |
2ec600d6 | 398 | * These attribute types are used with %NL80211_ATTR_STA_INFO |
fd5b74dc JB |
399 | * when getting information about a station. |
400 | * | |
2ec600d6 LCC |
401 | * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved |
402 | * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) | |
403 | * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) | |
404 | * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) | |
405 | * @__NL80211_STA_INFO_AFTER_LAST: internal | |
406 | * @NL80211_STA_INFO_MAX: highest possible station info attribute | |
407 | */ | |
408 | enum nl80211_sta_info { | |
409 | __NL80211_STA_INFO_INVALID, | |
410 | NL80211_STA_INFO_INACTIVE_TIME, | |
411 | NL80211_STA_INFO_RX_BYTES, | |
412 | NL80211_STA_INFO_TX_BYTES, | |
413 | NL80211_STA_INFO_LLID, | |
414 | NL80211_STA_INFO_PLID, | |
415 | NL80211_STA_INFO_PLINK_STATE, | |
416 | ||
417 | /* keep last */ | |
418 | __NL80211_STA_INFO_AFTER_LAST, | |
419 | NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 | |
420 | }; | |
421 | ||
422 | /** | |
423 | * enum nl80211_mpath_flags - nl80211 mesh path flags | |
424 | * | |
425 | * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active | |
426 | * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running | |
427 | * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN | |
428 | * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set | |
429 | * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded | |
430 | */ | |
431 | enum nl80211_mpath_flags { | |
432 | NL80211_MPATH_FLAG_ACTIVE = 1<<0, | |
433 | NL80211_MPATH_FLAG_RESOLVING = 1<<1, | |
434 | NL80211_MPATH_FLAG_DSN_VALID = 1<<2, | |
435 | NL80211_MPATH_FLAG_FIXED = 1<<3, | |
436 | NL80211_MPATH_FLAG_RESOLVED = 1<<4, | |
437 | }; | |
438 | ||
439 | /** | |
440 | * enum nl80211_mpath_info - mesh path information | |
441 | * | |
442 | * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting | |
443 | * information about a mesh path. | |
444 | * | |
445 | * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved | |
446 | * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination | |
447 | * @NL80211_ATTR_MPATH_DSN: destination sequence number | |
448 | * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path | |
449 | * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now | |
450 | * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in | |
451 | * &enum nl80211_mpath_flags; | |
452 | * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec | |
453 | * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries | |
fd5b74dc | 454 | */ |
2ec600d6 LCC |
455 | enum nl80211_mpath_info { |
456 | __NL80211_MPATH_INFO_INVALID, | |
457 | NL80211_MPATH_INFO_FRAME_QLEN, | |
458 | NL80211_MPATH_INFO_DSN, | |
459 | NL80211_MPATH_INFO_METRIC, | |
460 | NL80211_MPATH_INFO_EXPTIME, | |
461 | NL80211_MPATH_INFO_FLAGS, | |
462 | NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, | |
463 | NL80211_MPATH_INFO_DISCOVERY_RETRIES, | |
fd5b74dc JB |
464 | |
465 | /* keep last */ | |
2ec600d6 LCC |
466 | __NL80211_MPATH_INFO_AFTER_LAST, |
467 | NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 | |
fd5b74dc JB |
468 | }; |
469 | ||
ee688b00 JB |
470 | /** |
471 | * enum nl80211_band_attr - band attributes | |
472 | * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved | |
473 | * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, | |
474 | * an array of nested frequency attributes | |
475 | * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, | |
476 | * an array of nested bitrate attributes | |
d51626df JB |
477 | * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as |
478 | * defined in 802.11n | |
479 | * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE | |
480 | * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n | |
481 | * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n | |
ee688b00 JB |
482 | */ |
483 | enum nl80211_band_attr { | |
484 | __NL80211_BAND_ATTR_INVALID, | |
485 | NL80211_BAND_ATTR_FREQS, | |
486 | NL80211_BAND_ATTR_RATES, | |
487 | ||
d51626df JB |
488 | NL80211_BAND_ATTR_HT_MCS_SET, |
489 | NL80211_BAND_ATTR_HT_CAPA, | |
490 | NL80211_BAND_ATTR_HT_AMPDU_FACTOR, | |
491 | NL80211_BAND_ATTR_HT_AMPDU_DENSITY, | |
492 | ||
ee688b00 JB |
493 | /* keep last */ |
494 | __NL80211_BAND_ATTR_AFTER_LAST, | |
495 | NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 | |
496 | }; | |
497 | ||
d51626df JB |
498 | #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA |
499 | ||
ee688b00 JB |
500 | /** |
501 | * enum nl80211_frequency_attr - frequency attributes | |
502 | * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz | |
503 | * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current | |
504 | * regulatory domain. | |
505 | * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is | |
506 | * permitted on this channel in current regulatory domain. | |
507 | * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted | |
508 | * on this channel in current regulatory domain. | |
509 | * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory | |
510 | * on this channel in current regulatory domain. | |
bf8c1ac6 JM |
511 | * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm |
512 | * (100 * dBm). | |
ee688b00 JB |
513 | */ |
514 | enum nl80211_frequency_attr { | |
515 | __NL80211_FREQUENCY_ATTR_INVALID, | |
516 | NL80211_FREQUENCY_ATTR_FREQ, | |
517 | NL80211_FREQUENCY_ATTR_DISABLED, | |
518 | NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, | |
519 | NL80211_FREQUENCY_ATTR_NO_IBSS, | |
520 | NL80211_FREQUENCY_ATTR_RADAR, | |
e2f367f2 | 521 | NL80211_FREQUENCY_ATTR_MAX_TX_POWER, |
ee688b00 JB |
522 | |
523 | /* keep last */ | |
524 | __NL80211_FREQUENCY_ATTR_AFTER_LAST, | |
525 | NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 | |
526 | }; | |
527 | ||
e2f367f2 JM |
528 | #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER |
529 | ||
ee688b00 JB |
530 | /** |
531 | * enum nl80211_bitrate_attr - bitrate attributes | |
532 | * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps | |
533 | * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported | |
534 | * in 2.4 GHz band. | |
535 | */ | |
536 | enum nl80211_bitrate_attr { | |
537 | __NL80211_BITRATE_ATTR_INVALID, | |
538 | NL80211_BITRATE_ATTR_RATE, | |
539 | NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, | |
540 | ||
541 | /* keep last */ | |
542 | __NL80211_BITRATE_ATTR_AFTER_LAST, | |
543 | NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 | |
544 | }; | |
545 | ||
b2e1b302 LR |
546 | /** |
547 | * enum nl80211_reg_rule_attr - regulatory rule attributes | |
548 | * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional | |
549 | * considerations for a given frequency range. These are the | |
550 | * &enum nl80211_reg_rule_flags. | |
551 | * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory | |
552 | * rule in KHz. This is not a center of frequency but an actual regulatory | |
553 | * band edge. | |
554 | * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule | |
555 | * in KHz. This is not a center a frequency but an actual regulatory | |
556 | * band edge. | |
557 | * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this | |
558 | * frequency range, in KHz. | |
559 | * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain | |
560 | * for a given frequency range. The value is in mBi (100 * dBi). | |
561 | * If you don't have one then don't send this. | |
562 | * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for | |
563 | * a given frequency range. The value is in mBm (100 * dBm). | |
564 | */ | |
565 | enum nl80211_reg_rule_attr { | |
566 | __NL80211_REG_RULE_ATTR_INVALID, | |
567 | NL80211_ATTR_REG_RULE_FLAGS, | |
568 | ||
569 | NL80211_ATTR_FREQ_RANGE_START, | |
570 | NL80211_ATTR_FREQ_RANGE_END, | |
571 | NL80211_ATTR_FREQ_RANGE_MAX_BW, | |
572 | ||
573 | NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, | |
574 | NL80211_ATTR_POWER_RULE_MAX_EIRP, | |
575 | ||
576 | /* keep last */ | |
577 | __NL80211_REG_RULE_ATTR_AFTER_LAST, | |
578 | NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 | |
579 | }; | |
580 | ||
581 | /** | |
582 | * enum nl80211_reg_rule_flags - regulatory rule flags | |
583 | * | |
584 | * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed | |
585 | * @NL80211_RRF_NO_CCK: CCK modulation not allowed | |
586 | * @NL80211_RRF_NO_INDOOR: indoor operation not allowed | |
587 | * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed | |
588 | * @NL80211_RRF_DFS: DFS support is required to be used | |
589 | * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links | |
590 | * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links | |
591 | * @NL80211_RRF_PASSIVE_SCAN: passive scan is required | |
592 | * @NL80211_RRF_NO_IBSS: no IBSS is allowed | |
593 | */ | |
594 | enum nl80211_reg_rule_flags { | |
595 | NL80211_RRF_NO_OFDM = 1<<0, | |
596 | NL80211_RRF_NO_CCK = 1<<1, | |
597 | NL80211_RRF_NO_INDOOR = 1<<2, | |
598 | NL80211_RRF_NO_OUTDOOR = 1<<3, | |
599 | NL80211_RRF_DFS = 1<<4, | |
600 | NL80211_RRF_PTP_ONLY = 1<<5, | |
601 | NL80211_RRF_PTMP_ONLY = 1<<6, | |
602 | NL80211_RRF_PASSIVE_SCAN = 1<<7, | |
603 | NL80211_RRF_NO_IBSS = 1<<8, | |
604 | }; | |
605 | ||
66f7ac50 MW |
606 | /** |
607 | * enum nl80211_mntr_flags - monitor configuration flags | |
608 | * | |
609 | * Monitor configuration flags. | |
610 | * | |
611 | * @__NL80211_MNTR_FLAG_INVALID: reserved | |
612 | * | |
613 | * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS | |
614 | * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP | |
615 | * @NL80211_MNTR_FLAG_CONTROL: pass control frames | |
616 | * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering | |
617 | * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. | |
618 | * overrides all other flags. | |
619 | * | |
620 | * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use | |
621 | * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag | |
622 | */ | |
623 | enum nl80211_mntr_flags { | |
624 | __NL80211_MNTR_FLAG_INVALID, | |
625 | NL80211_MNTR_FLAG_FCSFAIL, | |
626 | NL80211_MNTR_FLAG_PLCPFAIL, | |
627 | NL80211_MNTR_FLAG_CONTROL, | |
628 | NL80211_MNTR_FLAG_OTHER_BSS, | |
629 | NL80211_MNTR_FLAG_COOK_FRAMES, | |
630 | ||
631 | /* keep last */ | |
632 | __NL80211_MNTR_FLAG_AFTER_LAST, | |
633 | NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 | |
634 | }; | |
635 | ||
93da9cc1 | 636 | /** |
637 | * enum nl80211_meshconf_params - mesh configuration parameters | |
638 | * | |
639 | * Mesh configuration parameters | |
640 | * | |
641 | * @__NL80211_MESHCONF_INVALID: internal use | |
642 | * | |
643 | * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in | |
644 | * millisecond units, used by the Peer Link Open message | |
645 | * | |
646 | * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in | |
647 | * millisecond units, used by the peer link management to close a peer link | |
648 | * | |
649 | * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in | |
650 | * millisecond units | |
651 | * | |
652 | * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed | |
653 | * on this mesh interface | |
654 | * | |
655 | * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link | |
656 | * open retries that can be sent to establish a new peer link instance in a | |
657 | * mesh | |
658 | * | |
659 | * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh | |
660 | * point. | |
661 | * | |
662 | * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically | |
663 | * open peer links when we detect compatible mesh peers. | |
664 | * | |
665 | * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames | |
666 | * containing a PREQ that an MP can send to a particular destination (path | |
667 | * target) | |
668 | * | |
669 | * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths | |
670 | * (in milliseconds) | |
671 | * | |
672 | * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait | |
673 | * until giving up on a path discovery (in milliseconds) | |
674 | * | |
675 | * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh | |
676 | * points receiving a PREQ shall consider the forwarding information from the | |
677 | * root to be valid. (TU = time unit) | |
678 | * | |
679 | * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in | |
680 | * TUs) during which an MP can send only one action frame containing a PREQ | |
681 | * reference element | |
682 | * | |
683 | * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) | |
684 | * that it takes for an HWMP information element to propagate across the mesh | |
685 | * | |
686 | * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute | |
687 | * | |
688 | * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use | |
689 | */ | |
690 | enum nl80211_meshconf_params { | |
691 | __NL80211_MESHCONF_INVALID, | |
692 | NL80211_MESHCONF_RETRY_TIMEOUT, | |
693 | NL80211_MESHCONF_CONFIRM_TIMEOUT, | |
694 | NL80211_MESHCONF_HOLDING_TIMEOUT, | |
695 | NL80211_MESHCONF_MAX_PEER_LINKS, | |
696 | NL80211_MESHCONF_MAX_RETRIES, | |
697 | NL80211_MESHCONF_TTL, | |
698 | NL80211_MESHCONF_AUTO_OPEN_PLINKS, | |
699 | NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, | |
700 | NL80211_MESHCONF_PATH_REFRESH_TIME, | |
701 | NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, | |
702 | NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, | |
703 | NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, | |
704 | NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, | |
705 | ||
706 | /* keep last */ | |
707 | __NL80211_MESHCONF_ATTR_AFTER_LAST, | |
708 | NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 | |
709 | }; | |
710 | ||
31888487 JM |
711 | /** |
712 | * enum nl80211_txq_attr - TX queue parameter attributes | |
713 | * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved | |
714 | * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) | |
715 | * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning | |
716 | * disabled | |
717 | * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form | |
718 | * 2^n-1 in the range 1..32767] | |
719 | * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form | |
720 | * 2^n-1 in the range 1..32767] | |
721 | * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] | |
722 | * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal | |
723 | * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number | |
724 | */ | |
725 | enum nl80211_txq_attr { | |
726 | __NL80211_TXQ_ATTR_INVALID, | |
727 | NL80211_TXQ_ATTR_QUEUE, | |
728 | NL80211_TXQ_ATTR_TXOP, | |
729 | NL80211_TXQ_ATTR_CWMIN, | |
730 | NL80211_TXQ_ATTR_CWMAX, | |
731 | NL80211_TXQ_ATTR_AIFS, | |
732 | ||
733 | /* keep last */ | |
734 | __NL80211_TXQ_ATTR_AFTER_LAST, | |
735 | NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 | |
736 | }; | |
737 | ||
738 | enum nl80211_txq_q { | |
739 | NL80211_TXQ_Q_VO, | |
740 | NL80211_TXQ_Q_VI, | |
741 | NL80211_TXQ_Q_BE, | |
742 | NL80211_TXQ_Q_BK | |
743 | }; | |
744 | ||
704232c2 | 745 | #endif /* __LINUX_NL80211_H */ |