Commit | Line | Data |
---|---|---|
16216333 | 1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ |
76cc9f0e WS |
2 | /* |
3 | * i2c.h - definitions for the Linux i2c bus interface | |
4 | * Copyright (C) 1995-2000 Simon G. Vogl | |
2f5a55c5 | 5 | * Copyright (C) 2013-2019 Wolfram Sang <wsa@kernel.org> |
76cc9f0e WS |
6 | * |
7 | * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and | |
8 | * Frodo Looijaard <frodol@dds.nl> | |
16216333 | 9 | */ |
1da177e4 LT |
10 | #ifndef _LINUX_I2C_H |
11 | #define _LINUX_I2C_H | |
12 | ||
5213d7ef | 13 | #include <linux/acpi.h> /* for acpi_handle */ |
b18c1ad6 | 14 | #include <linux/bits.h> |
a9d1b24d | 15 | #include <linux/mod_devicetable.h> |
1da177e4 | 16 | #include <linux/device.h> /* for struct device */ |
4e57b681 | 17 | #include <linux/sched.h> /* for completion */ |
5c085d36 | 18 | #include <linux/mutex.h> |
5a7b95fb | 19 | #include <linux/regulator/consumer.h> |
037741a6 | 20 | #include <linux/rtmutex.h> |
4d5538f5 | 21 | #include <linux/irqdomain.h> /* for Host Notify IRQ */ |
d12d42f7 | 22 | #include <linux/of.h> /* for struct device_node */ |
06a67848 | 23 | #include <linux/swab.h> /* for swab16 */ |
607ca46e | 24 | #include <uapi/linux/i2c.h> |
1da177e4 | 25 | |
e9ca9eb9 | 26 | extern struct bus_type i2c_bus_type; |
0826374b | 27 | extern struct device_type i2c_adapter_type; |
00a06c22 | 28 | extern struct device_type i2c_client_type; |
e9ca9eb9 | 29 | |
1da177e4 LT |
30 | /* --- General options ------------------------------------------------ */ |
31 | ||
32 | struct i2c_msg; | |
33 | struct i2c_algorithm; | |
34 | struct i2c_adapter; | |
35 | struct i2c_client; | |
36 | struct i2c_driver; | |
dde67eb1 | 37 | struct i2c_device_identity; |
1da177e4 | 38 | union i2c_smbus_data; |
4735c98f | 39 | struct i2c_board_info; |
4b1acc43 | 40 | enum i2c_slave_event; |
d68222d4 WS |
41 | typedef int (*i2c_slave_cb_t)(struct i2c_client *client, |
42 | enum i2c_slave_event event, u8 *val); | |
1da177e4 | 43 | |
e6282fc6 AS |
44 | /* I2C Frequency Modes */ |
45 | #define I2C_MAX_STANDARD_MODE_FREQ 100000 | |
46 | #define I2C_MAX_FAST_MODE_FREQ 400000 | |
47 | #define I2C_MAX_FAST_MODE_PLUS_FREQ 1000000 | |
48 | #define I2C_MAX_TURBO_MODE_FREQ 1400000 | |
49 | #define I2C_MAX_HIGH_SPEED_MODE_FREQ 3400000 | |
50 | #define I2C_MAX_ULTRA_FAST_MODE_FREQ 5000000 | |
51 | ||
de477254 | 52 | struct module; |
d3e1b617 | 53 | struct property_entry; |
de477254 | 54 | |
901a891f | 55 | #if IS_ENABLED(CONFIG_I2C) |
3b4c747c YY |
56 | /* Return the Frequency mode string based on the bus frequency */ |
57 | const char *i2c_freq_mode_string(u32 bus_freq_hz); | |
58 | ||
1da177e4 LT |
59 | /* |
60 | * The master routines are the ones normally used to transmit data to devices | |
438d6c2c DB |
61 | * on a bus (or read from them). Apart from two basic transfer functions to |
62 | * transmit one message at a time, a more complex version can be used to | |
1da177e4 | 63 | * transmit an arbitrary number of messages without interruption. |
aca7ed09 | 64 | * @count must be less than 64k since msg.len is u16. |
1da177e4 | 65 | */ |
c807da53 LC |
66 | int i2c_transfer_buffer_flags(const struct i2c_client *client, |
67 | char *buf, int count, u16 flags); | |
8a91732b WS |
68 | |
69 | /** | |
70 | * i2c_master_recv - issue a single I2C message in master receive mode | |
71 | * @client: Handle to slave device | |
72 | * @buf: Where to store data read from slave | |
73 | * @count: How many bytes to read, must be less than 64k since msg.len is u16 | |
74 | * | |
75 | * Returns negative errno, or else the number of bytes read. | |
76 | */ | |
77 | static inline int i2c_master_recv(const struct i2c_client *client, | |
78 | char *buf, int count) | |
79 | { | |
80 | return i2c_transfer_buffer_flags(client, buf, count, I2C_M_RD); | |
81 | }; | |
82 | ||
ba98645c WS |
83 | /** |
84 | * i2c_master_recv_dmasafe - issue a single I2C message in master receive mode | |
85 | * using a DMA safe buffer | |
86 | * @client: Handle to slave device | |
87 | * @buf: Where to store data read from slave, must be safe to use with DMA | |
88 | * @count: How many bytes to read, must be less than 64k since msg.len is u16 | |
89 | * | |
90 | * Returns negative errno, or else the number of bytes read. | |
91 | */ | |
92 | static inline int i2c_master_recv_dmasafe(const struct i2c_client *client, | |
93 | char *buf, int count) | |
94 | { | |
95 | return i2c_transfer_buffer_flags(client, buf, count, | |
96 | I2C_M_RD | I2C_M_DMA_SAFE); | |
97 | }; | |
98 | ||
8a91732b WS |
99 | /** |
100 | * i2c_master_send - issue a single I2C message in master transmit mode | |
101 | * @client: Handle to slave device | |
102 | * @buf: Data that will be written to the slave | |
103 | * @count: How many bytes to write, must be less than 64k since msg.len is u16 | |
104 | * | |
105 | * Returns negative errno, or else the number of bytes written. | |
106 | */ | |
107 | static inline int i2c_master_send(const struct i2c_client *client, | |
108 | const char *buf, int count) | |
109 | { | |
110 | return i2c_transfer_buffer_flags(client, (char *)buf, count, 0); | |
111 | }; | |
1da177e4 | 112 | |
ba98645c WS |
113 | /** |
114 | * i2c_master_send_dmasafe - issue a single I2C message in master transmit mode | |
115 | * using a DMA safe buffer | |
116 | * @client: Handle to slave device | |
117 | * @buf: Data that will be written to the slave, must be safe to use with DMA | |
118 | * @count: How many bytes to write, must be less than 64k since msg.len is u16 | |
119 | * | |
120 | * Returns negative errno, or else the number of bytes written. | |
121 | */ | |
122 | static inline int i2c_master_send_dmasafe(const struct i2c_client *client, | |
123 | const char *buf, int count) | |
124 | { | |
125 | return i2c_transfer_buffer_flags(client, (char *)buf, count, | |
126 | I2C_M_DMA_SAFE); | |
127 | }; | |
128 | ||
1da177e4 LT |
129 | /* Transfer num messages. |
130 | */ | |
c807da53 | 131 | int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num); |
b37d2a3a | 132 | /* Unlocked flavor */ |
c807da53 | 133 | int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num); |
1da177e4 LT |
134 | |
135 | /* This is the very generalized SMBus access routine. You probably do not | |
136 | want to use this, though; one of the functions below may be much easier, | |
438d6c2c | 137 | and probably just as fast. |
1da177e4 LT |
138 | Note that we use i2c_adapter here, because you do not need a specific |
139 | smbus adapter to call this function. */ | |
63453b59 PR |
140 | s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, |
141 | unsigned short flags, char read_write, u8 command, | |
142 | int protocol, union i2c_smbus_data *data); | |
143 | ||
144 | /* Unlocked flavor */ | |
145 | s32 __i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, | |
146 | unsigned short flags, char read_write, u8 command, | |
147 | int protocol, union i2c_smbus_data *data); | |
1da177e4 LT |
148 | |
149 | /* Now follow the 'nice' access routines. These also document the calling | |
ae7193f7 | 150 | conventions of i2c_smbus_xfer. */ |
1da177e4 | 151 | |
87cf5127 | 152 | u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count); |
c807da53 LC |
153 | s32 i2c_smbus_read_byte(const struct i2c_client *client); |
154 | s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value); | |
155 | s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command); | |
156 | s32 i2c_smbus_write_byte_data(const struct i2c_client *client, | |
157 | u8 command, u8 value); | |
158 | s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command); | |
159 | s32 i2c_smbus_write_word_data(const struct i2c_client *client, | |
160 | u8 command, u16 value); | |
06a67848 JC |
161 | |
162 | static inline s32 | |
163 | i2c_smbus_read_word_swapped(const struct i2c_client *client, u8 command) | |
164 | { | |
165 | s32 value = i2c_smbus_read_word_data(client, command); | |
166 | ||
167 | return (value < 0) ? value : swab16(value); | |
168 | } | |
169 | ||
170 | static inline s32 | |
171 | i2c_smbus_write_word_swapped(const struct i2c_client *client, | |
172 | u8 command, u16 value) | |
173 | { | |
174 | return i2c_smbus_write_word_data(client, command, swab16(value)); | |
175 | } | |
176 | ||
b86a1bc8 | 177 | /* Returns the number of read bytes */ |
c807da53 LC |
178 | s32 i2c_smbus_read_block_data(const struct i2c_client *client, |
179 | u8 command, u8 *values); | |
180 | s32 i2c_smbus_write_block_data(const struct i2c_client *client, | |
181 | u8 command, u8 length, const u8 *values); | |
31ec5bc5 | 182 | /* Returns the number of read bytes */ |
c807da53 LC |
183 | s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, |
184 | u8 command, u8 length, u8 *values); | |
185 | s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, | |
186 | u8 command, u8 length, const u8 *values); | |
187 | s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client, | |
188 | u8 command, u8 length, | |
189 | u8 *values); | |
dde67eb1 PR |
190 | int i2c_get_device_id(const struct i2c_client *client, |
191 | struct i2c_device_identity *id); | |
66223373 | 192 | const struct i2c_device_id *i2c_client_get_device_id(const struct i2c_client *client); |
23af8400 | 193 | #endif /* I2C */ |
1da177e4 | 194 | |
dde67eb1 PR |
195 | /** |
196 | * struct i2c_device_identity - i2c client device identification | |
197 | * @manufacturer_id: 0 - 4095, database maintained by NXP | |
198 | * @part_id: 0 - 511, according to manufacturer | |
199 | * @die_revision: 0 - 7, according to manufacturer | |
200 | */ | |
201 | struct i2c_device_identity { | |
202 | u16 manufacturer_id; | |
203 | #define I2C_DEVICE_ID_NXP_SEMICONDUCTORS 0 | |
204 | #define I2C_DEVICE_ID_NXP_SEMICONDUCTORS_1 1 | |
205 | #define I2C_DEVICE_ID_NXP_SEMICONDUCTORS_2 2 | |
206 | #define I2C_DEVICE_ID_NXP_SEMICONDUCTORS_3 3 | |
207 | #define I2C_DEVICE_ID_RAMTRON_INTERNATIONAL 4 | |
208 | #define I2C_DEVICE_ID_ANALOG_DEVICES 5 | |
209 | #define I2C_DEVICE_ID_STMICROELECTRONICS 6 | |
210 | #define I2C_DEVICE_ID_ON_SEMICONDUCTOR 7 | |
211 | #define I2C_DEVICE_ID_SPRINTEK_CORPORATION 8 | |
212 | #define I2C_DEVICE_ID_ESPROS_PHOTONICS_AG 9 | |
213 | #define I2C_DEVICE_ID_FUJITSU_SEMICONDUCTOR 10 | |
214 | #define I2C_DEVICE_ID_FLIR 11 | |
215 | #define I2C_DEVICE_ID_O2MICRO 12 | |
216 | #define I2C_DEVICE_ID_ATMEL 13 | |
217 | #define I2C_DEVICE_ID_NONE 0xffff | |
218 | u16 part_id; | |
219 | u8 die_revision; | |
220 | }; | |
221 | ||
b4f21054 BT |
222 | enum i2c_alert_protocol { |
223 | I2C_PROTOCOL_SMBUS_ALERT, | |
e456cd37 | 224 | I2C_PROTOCOL_SMBUS_HOST_NOTIFY, |
b4f21054 BT |
225 | }; |
226 | ||
b18c1ad6 SA |
227 | /** |
228 | * enum i2c_driver_flags - Flags for an I2C device driver | |
229 | * | |
230 | * @I2C_DRV_ACPI_WAIVE_D0_PROBE: Don't put the device in D0 state for probe | |
231 | */ | |
232 | enum i2c_driver_flags { | |
233 | I2C_DRV_ACPI_WAIVE_D0_PROBE = BIT(0), | |
234 | }; | |
235 | ||
4735c98f JD |
236 | /** |
237 | * struct i2c_driver - represent an I2C device driver | |
238 | * @class: What kind of i2c device we instantiate (for detect) | |
03c835f4 UKK |
239 | * @probe: Callback for device binding |
240 | * @probe_new: Transitional callback for device binding - do not use | |
729d6dd5 | 241 | * @remove: Callback for device unbinding |
96e21e4f | 242 | * @shutdown: Callback for device shutdown |
72d2e9f9 | 243 | * @alert: Alert callback, for example for the SMBus alert protocol |
96e21e4f JD |
244 | * @command: Callback for bus-wide signaling (optional) |
245 | * @driver: Device driver model driver | |
246 | * @id_table: List of I2C devices supported by this driver | |
4735c98f | 247 | * @detect: Callback for device detection |
c3813d6a | 248 | * @address_list: The I2C addresses to probe (for detect) |
4735c98f | 249 | * @clients: List of detected clients we created (for i2c-core use only) |
b18c1ad6 | 250 | * @flags: A bitmask of flags defined in &enum i2c_driver_flags |
35d8b2e6 LR |
251 | * |
252 | * The driver.owner field should be set to the module owner of this driver. | |
253 | * The driver.name field should be set to the name of this driver. | |
4735c98f | 254 | * |
0ec13867 | 255 | * For automatic device detection, both @detect and @address_list must |
4735c98f JD |
256 | * be defined. @class should also be set, otherwise only devices forced |
257 | * with module parameters will be created. The detect function must | |
258 | * fill at least the name field of the i2c_board_info structure it is | |
259 | * handed upon successful detection, and possibly also the flags field. | |
260 | * | |
261 | * If @detect is missing, the driver will still work fine for enumerated | |
262 | * devices. Detected devices simply won't be supported. This is expected | |
263 | * for the many I2C/SMBus devices which can't be detected reliably, and | |
264 | * the ones which can always be enumerated in practice. | |
265 | * | |
266 | * The i2c_client structure which is handed to the @detect callback is | |
267 | * not a real i2c_client. It is initialized just enough so that you can | |
268 | * call i2c_smbus_read_byte_data and friends on it. Don't do anything | |
269 | * else with it. In particular, calling dev_dbg and friends on it is | |
270 | * not allowed. | |
1da177e4 | 271 | */ |
1da177e4 | 272 | struct i2c_driver { |
1da177e4 | 273 | unsigned int class; |
1da177e4 | 274 | |
03c835f4 | 275 | union { |
729d6dd5 | 276 | /* Standard driver model interfaces */ |
03c835f4 UKK |
277 | int (*probe)(struct i2c_client *client); |
278 | /* | |
279 | * Legacy callback that was part of a conversion of .probe(). | |
280 | * Today it has the same semantic as .probe(). Don't use for new | |
281 | * code. | |
282 | */ | |
283 | int (*probe_new)(struct i2c_client *client); | |
284 | }; | |
ed5c2f5f | 285 | void (*remove)(struct i2c_client *client); |
7b4fbc50 | 286 | |
b8a1a4cd | 287 | |
f37dd80a | 288 | /* driver model interfaces that don't relate to enumeration */ |
d68222d4 | 289 | void (*shutdown)(struct i2c_client *client); |
f37dd80a | 290 | |
b5527a77 JD |
291 | /* Alert callback, for example for the SMBus alert protocol. |
292 | * The format and meaning of the data value depends on the protocol. | |
293 | * For the SMBus alert protocol, there is a single bit of data passed | |
294 | * as the alert response's low bit ("event flag"). | |
e456cd37 BT |
295 | * For the SMBus Host Notify protocol, the data corresponds to the |
296 | * 16-bit payload data reported by the slave device acting as master. | |
b5527a77 | 297 | */ |
d68222d4 | 298 | void (*alert)(struct i2c_client *client, enum i2c_alert_protocol protocol, |
b4f21054 | 299 | unsigned int data); |
b5527a77 | 300 | |
1da177e4 LT |
301 | /* a ioctl like command that can be used to perform specific functions |
302 | * with the device. | |
303 | */ | |
3ae70dee | 304 | int (*command)(struct i2c_client *client, unsigned int cmd, void *arg); |
1da177e4 LT |
305 | |
306 | struct device_driver driver; | |
d2653e92 | 307 | const struct i2c_device_id *id_table; |
4735c98f JD |
308 | |
309 | /* Device detection callback for automatic device creation */ | |
d68222d4 | 310 | int (*detect)(struct i2c_client *client, struct i2c_board_info *info); |
c3813d6a | 311 | const unsigned short *address_list; |
4735c98f | 312 | struct list_head clients; |
b18c1ad6 SA |
313 | |
314 | u32 flags; | |
1da177e4 LT |
315 | }; |
316 | #define to_i2c_driver(d) container_of(d, struct i2c_driver, driver) | |
317 | ||
2096b956 DB |
318 | /** |
319 | * struct i2c_client - represent an I2C slave device | |
2caea56f | 320 | * @flags: see I2C_CLIENT_* for possible flags |
2096b956 DB |
321 | * @addr: Address used on the I2C bus connected to the parent adapter. |
322 | * @name: Indicates the type of the device, usually a chip name that's | |
323 | * generic enough to hide second-sourcing and compatible revisions. | |
d64f73be | 324 | * @adapter: manages the bus segment hosting this I2C device |
2096b956 | 325 | * @dev: Driver model device node for the slave. |
3ac61258 | 326 | * @init_irq: IRQ that was set at initialization |
d64f73be | 327 | * @irq: indicates the IRQ generated by this device (if any) |
99cd8e25 JD |
328 | * @detected: member of an i2c_driver.clients list or i2c-core's |
329 | * userspace_devices list | |
4b1acc43 WS |
330 | * @slave_cb: Callback when I2C slave mode of an adapter is used. The adapter |
331 | * calls it to pass on slave events to the slave driver. | |
5b547582 DT |
332 | * @devres_group_id: id of the devres group that will be created for resources |
333 | * acquired when probing this device. | |
2096b956 DB |
334 | * |
335 | * An i2c_client identifies a single device (i.e. chip) connected to an | |
d64f73be DB |
336 | * i2c bus. The behaviour exposed to Linux is defined by the driver |
337 | * managing the device. | |
1da177e4 LT |
338 | */ |
339 | struct i2c_client { | |
2096b956 | 340 | unsigned short flags; /* div., see below */ |
2caea56f WS |
341 | #define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */ |
342 | #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ | |
343 | /* Must equal I2C_M_TEN below */ | |
344 | #define I2C_CLIENT_SLAVE 0x20 /* we are the slave */ | |
345 | #define I2C_CLIENT_HOST_NOTIFY 0x40 /* We want to use I2C host notify */ | |
346 | #define I2C_CLIENT_WAKE 0x80 /* for board_info; true iff can wake */ | |
347 | #define I2C_CLIENT_SCCB 0x9000 /* Use Omnivision SCCB protocol */ | |
348 | /* Must match I2C_M_STOP|IGNORE_NAK */ | |
349 | ||
438d6c2c | 350 | unsigned short addr; /* chip address - NOTE: 7bit */ |
1da177e4 | 351 | /* addresses are stored in the */ |
5071860a | 352 | /* _LOWER_ 7 bits */ |
2096b956 | 353 | char name[I2C_NAME_SIZE]; |
1da177e4 | 354 | struct i2c_adapter *adapter; /* the adapter we sit on */ |
1da177e4 | 355 | struct device dev; /* the device structure */ |
93b6604c | 356 | int init_irq; /* irq set at initialization */ |
8e29da9e | 357 | int irq; /* irq issued by device */ |
4735c98f | 358 | struct list_head detected; |
d5fd120e | 359 | #if IS_ENABLED(CONFIG_I2C_SLAVE) |
4b1acc43 | 360 | i2c_slave_cb_t slave_cb; /* callback for slave mode */ |
d5fd120e | 361 | #endif |
5b547582 | 362 | void *devres_group_id; /* ID of probe devres group */ |
1da177e4 LT |
363 | }; |
364 | #define to_i2c_client(d) container_of(d, struct i2c_client, dev) | |
365 | ||
c807da53 LC |
366 | struct i2c_adapter *i2c_verify_adapter(struct device *dev); |
367 | const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id, | |
368 | const struct i2c_client *client); | |
9b766b81 | 369 | |
a61fc683 | 370 | static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj) |
371 | { | |
b1d4dc15 | 372 | struct device * const dev = kobj_to_dev(kobj); |
d75d53cd | 373 | return to_i2c_client(dev); |
a61fc683 | 374 | } |
375 | ||
7df915e5 | 376 | static inline void *i2c_get_clientdata(const struct i2c_client *client) |
1da177e4 | 377 | { |
7df915e5 | 378 | return dev_get_drvdata(&client->dev); |
1da177e4 LT |
379 | } |
380 | ||
7df915e5 | 381 | static inline void i2c_set_clientdata(struct i2c_client *client, void *data) |
1da177e4 | 382 | { |
7df915e5 | 383 | dev_set_drvdata(&client->dev, data); |
1da177e4 LT |
384 | } |
385 | ||
4b1acc43 WS |
386 | /* I2C slave support */ |
387 | ||
388 | enum i2c_slave_event { | |
5b77d162 WS |
389 | I2C_SLAVE_READ_REQUESTED, |
390 | I2C_SLAVE_WRITE_REQUESTED, | |
391 | I2C_SLAVE_READ_PROCESSED, | |
392 | I2C_SLAVE_WRITE_RECEIVED, | |
4b1acc43 WS |
393 | I2C_SLAVE_STOP, |
394 | }; | |
395 | ||
c807da53 LC |
396 | int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb); |
397 | int i2c_slave_unregister(struct i2c_client *client); | |
d714fb25 JHY |
398 | int i2c_slave_event(struct i2c_client *client, |
399 | enum i2c_slave_event event, u8 *val); | |
5d388143 AB |
400 | #if IS_ENABLED(CONFIG_I2C_SLAVE) |
401 | bool i2c_detect_slave_mode(struct device *dev); | |
8f1a357d AS |
402 | #else |
403 | static inline bool i2c_detect_slave_mode(struct device *dev) { return false; } | |
d5fd120e | 404 | #endif |
4b1acc43 | 405 | |
9c1600ed DB |
406 | /** |
407 | * struct i2c_board_info - template for device creation | |
eb8a7908 | 408 | * @type: chip type, to initialize i2c_client.name |
9c1600ed DB |
409 | * @flags: to initialize i2c_client.flags |
410 | * @addr: stored in i2c_client.addr | |
728fe6ce | 411 | * @dev_name: Overrides the default <busnr>-<addr> dev_name if set |
9c1600ed | 412 | * @platform_data: stored in i2c_client.dev.platform_data |
72d2e9f9 | 413 | * @of_node: pointer to OpenFirmware device node |
ce793486 | 414 | * @fwnode: device node supplied by the platform firmware |
714638e0 | 415 | * @swnode: software node for the device |
4124c4eb DT |
416 | * @resources: resources associated with the device |
417 | * @num_resources: number of resources in the @resources array | |
9c1600ed | 418 | * @irq: stored in i2c_client.irq |
d64f73be | 419 | * |
9c1600ed DB |
420 | * I2C doesn't actually support hardware probing, although controllers and |
421 | * devices may be able to use I2C_SMBUS_QUICK to tell whether or not there's | |
422 | * a device at a given address. Drivers commonly need more information than | |
423 | * that, such as chip type, configuration, associated IRQ, and so on. | |
424 | * | |
425 | * i2c_board_info is used to build tables of information listing I2C devices | |
729d6dd5 JD |
426 | * that are present. This information is used to grow the driver model tree. |
427 | * For mainboards this is done statically using i2c_register_board_info(); | |
428 | * bus numbers identify adapters that aren't yet available. For add-on boards, | |
390fd047 | 429 | * i2c_new_client_device() does this dynamically with the adapter already known. |
9c1600ed DB |
430 | */ |
431 | struct i2c_board_info { | |
9c1600ed DB |
432 | char type[I2C_NAME_SIZE]; |
433 | unsigned short flags; | |
434 | unsigned short addr; | |
728fe6ce | 435 | const char *dev_name; |
9c1600ed | 436 | void *platform_data; |
d12d42f7 | 437 | struct device_node *of_node; |
ce793486 | 438 | struct fwnode_handle *fwnode; |
714638e0 | 439 | const struct software_node *swnode; |
4124c4eb DT |
440 | const struct resource *resources; |
441 | unsigned int num_resources; | |
9c1600ed DB |
442 | int irq; |
443 | }; | |
444 | ||
445 | /** | |
3760f736 JD |
446 | * I2C_BOARD_INFO - macro used to list an i2c device and its address |
447 | * @dev_type: identifies the device type | |
9c1600ed DB |
448 | * @dev_addr: the device's address on the bus. |
449 | * | |
450 | * This macro initializes essential fields of a struct i2c_board_info, | |
451 | * declaring what has been provided on a particular board. Optional | |
3760f736 JD |
452 | * fields (such as associated irq, or device-specific platform_data) |
453 | * are provided using conventional syntax. | |
9c1600ed | 454 | */ |
3ae70dee | 455 | #define I2C_BOARD_INFO(dev_type, dev_addr) \ |
c758e8cf | 456 | .type = dev_type, .addr = (dev_addr) |
9c1600ed DB |
457 | |
458 | ||
901a891f | 459 | #if IS_ENABLED(CONFIG_I2C) |
390fd047 WS |
460 | /* |
461 | * Add-on boards should register/unregister their devices; e.g. a board | |
9c1600ed DB |
462 | * with integrated I2C, a config eeprom, sensors, and a codec that's |
463 | * used in conjunction with the primary hardware. | |
464 | */ | |
c807da53 | 465 | struct i2c_client * |
550113d4 WS |
466 | i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info); |
467 | ||
12b5053a JD |
468 | /* If you don't know the exact address of an I2C device, use this variant |
469 | * instead, which can probe for device presence in a list of possible | |
9a94241a JD |
470 | * addresses. The "probe" callback function is optional. If it is provided, |
471 | * it must return 1 on successful probe, 0 otherwise. If it is not provided, | |
472 | * a default probing method is used. | |
12b5053a | 473 | */ |
c807da53 | 474 | struct i2c_client * |
c1d08475 WS |
475 | i2c_new_scanned_device(struct i2c_adapter *adap, |
476 | struct i2c_board_info *info, | |
477 | unsigned short const *addr_list, | |
478 | int (*probe)(struct i2c_adapter *adap, unsigned short addr)); | |
479 | ||
d44f19d5 | 480 | /* Common custom probe functions */ |
c807da53 | 481 | int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr); |
d44f19d5 | 482 | |
c807da53 | 483 | struct i2c_client * |
550113d4 WS |
484 | i2c_new_dummy_device(struct i2c_adapter *adapter, u16 address); |
485 | ||
c807da53 | 486 | struct i2c_client * |
b8f5fe3b HK |
487 | devm_i2c_new_dummy_device(struct device *dev, struct i2c_adapter *adap, u16 address); |
488 | ||
c807da53 | 489 | struct i2c_client * |
af80559b | 490 | i2c_new_ancillary_device(struct i2c_client *client, |
c807da53 LC |
491 | const char *name, |
492 | u16 default_addr); | |
0f614d83 | 493 | |
c807da53 | 494 | void i2c_unregister_device(struct i2c_client *client); |
aa5c8b25 JC |
495 | |
496 | struct i2c_client *i2c_verify_client(struct device *dev); | |
497 | #else | |
498 | static inline struct i2c_client *i2c_verify_client(struct device *dev) | |
499 | { | |
500 | return NULL; | |
501 | } | |
23af8400 | 502 | #endif /* I2C */ |
9c1600ed DB |
503 | |
504 | /* Mainboard arch_initcall() code should register all its I2C devices. | |
505 | * This is done at arch_initcall time, before declaring any i2c adapters. | |
506 | * Modules for add-on boards must use other calls. | |
507 | */ | |
26386763 | 508 | #ifdef CONFIG_I2C_BOARDINFO |
c807da53 | 509 | int |
3ae70dee JD |
510 | i2c_register_board_info(int busnum, struct i2c_board_info const *info, |
511 | unsigned n); | |
26386763 DB |
512 | #else |
513 | static inline int | |
3ae70dee JD |
514 | i2c_register_board_info(int busnum, struct i2c_board_info const *info, |
515 | unsigned n) | |
26386763 DB |
516 | { |
517 | return 0; | |
518 | } | |
23af8400 | 519 | #endif /* I2C_BOARDINFO */ |
9c1600ed | 520 | |
25ee33fb BD |
521 | /** |
522 | * struct i2c_algorithm - represent I2C transfer method | |
523 | * @master_xfer: Issue a set of i2c transactions to the given I2C adapter | |
524 | * defined by the msgs array, with num messages available to transfer via | |
525 | * the adapter specified by adap. | |
63b96983 WS |
526 | * @master_xfer_atomic: same as @master_xfer. Yet, only using atomic context |
527 | * so e.g. PMICs can be accessed very late before shutdown. Optional. | |
25ee33fb BD |
528 | * @smbus_xfer: Issue smbus transactions to the given I2C adapter. If this |
529 | * is not present, then the bus layer will try and convert the SMBus calls | |
530 | * into I2C transfers instead. | |
63b96983 WS |
531 | * @smbus_xfer_atomic: same as @smbus_xfer. Yet, only using atomic context |
532 | * so e.g. PMICs can be accessed very late before shutdown. Optional. | |
25ee33fb | 533 | * @functionality: Return the flags that this algorithm/adapter pair supports |
692b65c8 | 534 | * from the ``I2C_FUNC_*`` flags. |
4b1acc43 WS |
535 | * @reg_slave: Register given client to I2C slave mode of this adapter |
536 | * @unreg_slave: Unregister given client from I2C slave mode of this adapter | |
25ee33fb | 537 | * |
1da177e4 LT |
538 | * The following structs are for those who like to implement new bus drivers: |
539 | * i2c_algorithm is the interface to a class of hardware solutions which can | |
540 | * be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584 | |
541 | * to name two of the most common. | |
25ee33fb | 542 | * |
692b65c8 | 543 | * The return codes from the ``master_xfer{_atomic}`` fields should indicate the |
63b96983 | 544 | * type of error code that occurred during the transfer, as documented in the |
a1182149 WS |
545 | * Kernel Documentation file Documentation/i2c/fault-codes.rst. Otherwise, the |
546 | * number of messages executed should be returned. | |
1da177e4 LT |
547 | */ |
548 | struct i2c_algorithm { | |
f6ac28d6 WS |
549 | /* |
550 | * If an adapter algorithm can't do I2C-level access, set master_xfer | |
551 | * to NULL. If an adapter algorithm can do SMBus access, set | |
552 | * smbus_xfer. If set to NULL, the SMBus protocol is simulated | |
553 | * using common I2C messages. | |
554 | * | |
555 | * master_xfer should return the number of messages successfully | |
556 | * processed, or a negative value on error | |
557 | */ | |
3ae70dee JD |
558 | int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs, |
559 | int num); | |
63b96983 WS |
560 | int (*master_xfer_atomic)(struct i2c_adapter *adap, |
561 | struct i2c_msg *msgs, int num); | |
f6ac28d6 WS |
562 | int (*smbus_xfer)(struct i2c_adapter *adap, u16 addr, |
563 | unsigned short flags, char read_write, | |
564 | u8 command, int size, union i2c_smbus_data *data); | |
63b96983 WS |
565 | int (*smbus_xfer_atomic)(struct i2c_adapter *adap, u16 addr, |
566 | unsigned short flags, char read_write, | |
567 | u8 command, int size, union i2c_smbus_data *data); | |
1da177e4 | 568 | |
1da177e4 | 569 | /* To determine what the adapter supports */ |
f6ac28d6 | 570 | u32 (*functionality)(struct i2c_adapter *adap); |
4b1acc43 | 571 | |
d5fd120e | 572 | #if IS_ENABLED(CONFIG_I2C_SLAVE) |
4b1acc43 WS |
573 | int (*reg_slave)(struct i2c_client *client); |
574 | int (*unreg_slave)(struct i2c_client *client); | |
d5fd120e | 575 | #endif |
1da177e4 LT |
576 | }; |
577 | ||
d1ed7985 PR |
578 | /** |
579 | * struct i2c_lock_operations - represent I2C locking operations | |
580 | * @lock_bus: Get exclusive access to an I2C bus segment | |
581 | * @trylock_bus: Try to get exclusive access to an I2C bus segment | |
582 | * @unlock_bus: Release exclusive access to an I2C bus segment | |
583 | * | |
584 | * The main operations are wrapped by i2c_lock_bus and i2c_unlock_bus. | |
585 | */ | |
586 | struct i2c_lock_operations { | |
d68222d4 WS |
587 | void (*lock_bus)(struct i2c_adapter *adapter, unsigned int flags); |
588 | int (*trylock_bus)(struct i2c_adapter *adapter, unsigned int flags); | |
589 | void (*unlock_bus)(struct i2c_adapter *adapter, unsigned int flags); | |
d1ed7985 PR |
590 | }; |
591 | ||
e1dba01c WS |
592 | /** |
593 | * struct i2c_timings - I2C timing information | |
594 | * @bus_freq_hz: the bus frequency in Hz | |
595 | * @scl_rise_ns: time SCL signal takes to rise in ns; t(r) in the I2C specification | |
596 | * @scl_fall_ns: time SCL signal takes to fall in ns; t(f) in the I2C specification | |
597 | * @scl_int_delay_ns: time IP core additionally needs to setup SCL in ns | |
598 | * @sda_fall_ns: time SDA signal takes to fall in ns; t(f) in the I2C specification | |
4717be73 | 599 | * @sda_hold_ns: time IP core additionally needs to hold SDA in ns |
b84dfe1a EH |
600 | * @digital_filter_width_ns: width in ns of spikes on i2c lines that the IP core |
601 | * digital filter can filter out | |
602 | * @analog_filter_cutoff_freq_hz: threshold frequency for the low pass IP core | |
603 | * analog filter | |
e1dba01c WS |
604 | */ |
605 | struct i2c_timings { | |
606 | u32 bus_freq_hz; | |
607 | u32 scl_rise_ns; | |
608 | u32 scl_fall_ns; | |
609 | u32 scl_int_delay_ns; | |
610 | u32 sda_fall_ns; | |
4717be73 | 611 | u32 sda_hold_ns; |
b84dfe1a EH |
612 | u32 digital_filter_width_ns; |
613 | u32 analog_filter_cutoff_freq_hz; | |
e1dba01c WS |
614 | }; |
615 | ||
5f9296ba VK |
616 | /** |
617 | * struct i2c_bus_recovery_info - I2C bus recovery information | |
618 | * @recover_bus: Recover routine. Either pass driver's recover_bus() routine, or | |
e1eb7d28 | 619 | * i2c_generic_scl_recovery(). |
5f9296ba | 620 | * @get_scl: This gets current value of SCL line. Mandatory for generic SCL |
766a4f27 WS |
621 | * recovery. Populated internally for generic GPIO recovery. |
622 | * @set_scl: This sets/clears the SCL line. Mandatory for generic SCL recovery. | |
623 | * Populated internally for generic GPIO recovery. | |
ffc59c49 WS |
624 | * @get_sda: This gets current value of SDA line. This or set_sda() is mandatory |
625 | * for generic SCL recovery. Populated internally, if sda_gpio is a valid | |
626 | * GPIO, for generic GPIO recovery. | |
627 | * @set_sda: This sets/clears the SDA line. This or get_sda() is mandatory for | |
628 | * generic SCL recovery. Populated internally, if sda_gpio is a valid GPIO, | |
629 | * for generic GPIO recovery. | |
7ca5f6be WS |
630 | * @get_bus_free: Returns the bus free state as seen from the IP core in case it |
631 | * has a more complex internal logic than just reading SDA. Optional. | |
5f9296ba VK |
632 | * @prepare_recovery: This will be called before starting recovery. Platform may |
633 | * configure padmux here for SDA/SCL line or something else they want. | |
634 | * @unprepare_recovery: This will be called after completing recovery. Platform | |
635 | * may configure padmux here for SDA/SCL line or something else they want. | |
3991c5c8 PR |
636 | * @scl_gpiod: gpiod of the SCL line. Only required for GPIO recovery. |
637 | * @sda_gpiod: gpiod of the SDA line. Only required for GPIO recovery. | |
75820314 CC |
638 | * @pinctrl: pinctrl used by GPIO recovery to change the state of the I2C pins. |
639 | * Optional. | |
640 | * @pins_default: default pinctrl state of SCL/SDA lines, when they are assigned | |
641 | * to the I2C bus. Optional. Populated internally for GPIO recovery, if | |
642 | * state with the name PINCTRL_STATE_DEFAULT is found and pinctrl is valid. | |
643 | * @pins_gpio: recovery pinctrl state of SCL/SDA lines, when they are used as | |
644 | * GPIOs. Optional. Populated internally for GPIO recovery, if this state | |
645 | * is called "gpio" or "recovery" and pinctrl is valid. | |
5f9296ba VK |
646 | */ |
647 | struct i2c_bus_recovery_info { | |
6c92204e | 648 | int (*recover_bus)(struct i2c_adapter *adap); |
5f9296ba | 649 | |
6c92204e WS |
650 | int (*get_scl)(struct i2c_adapter *adap); |
651 | void (*set_scl)(struct i2c_adapter *adap, int val); | |
652 | int (*get_sda)(struct i2c_adapter *adap); | |
8092178f | 653 | void (*set_sda)(struct i2c_adapter *adap, int val); |
7ca5f6be | 654 | int (*get_bus_free)(struct i2c_adapter *adap); |
5f9296ba | 655 | |
6c92204e WS |
656 | void (*prepare_recovery)(struct i2c_adapter *adap); |
657 | void (*unprepare_recovery)(struct i2c_adapter *adap); | |
5f9296ba VK |
658 | |
659 | /* gpio recovery */ | |
3991c5c8 PR |
660 | struct gpio_desc *scl_gpiod; |
661 | struct gpio_desc *sda_gpiod; | |
75820314 CC |
662 | struct pinctrl *pinctrl; |
663 | struct pinctrl_state *pins_default; | |
664 | struct pinctrl_state *pins_gpio; | |
5f9296ba VK |
665 | }; |
666 | ||
667 | int i2c_recover_bus(struct i2c_adapter *adap); | |
668 | ||
669 | /* Generic recovery routines */ | |
5f9296ba VK |
670 | int i2c_generic_scl_recovery(struct i2c_adapter *adap); |
671 | ||
2187f03a WS |
672 | /** |
673 | * struct i2c_adapter_quirks - describe flaws of an i2c adapter | |
674 | * @flags: see I2C_AQ_* for possible flags and read below | |
675 | * @max_num_msgs: maximum number of messages per transfer | |
676 | * @max_write_len: maximum length of a write message | |
677 | * @max_read_len: maximum length of a read message | |
678 | * @max_comb_1st_msg_len: maximum length of the first msg in a combined message | |
679 | * @max_comb_2nd_msg_len: maximum length of the second msg in a combined message | |
680 | * | |
681 | * Note about combined messages: Some I2C controllers can only send one message | |
682 | * per transfer, plus something called combined message or write-then-read. | |
683 | * This is (usually) a small write message followed by a read message and | |
684 | * barely enough to access register based devices like EEPROMs. There is a flag | |
685 | * to support this mode. It implies max_num_msg = 2 and does the length checks | |
686 | * with max_comb_*_len because combined message mode usually has its own | |
687 | * limitations. Because of HW implementations, some controllers can actually do | |
688 | * write-then-anything or other variants. To support that, write-then-read has | |
689 | * been broken out into smaller bits like write-first and read-second which can | |
690 | * be combined as needed. | |
691 | */ | |
692 | ||
693 | struct i2c_adapter_quirks { | |
694 | u64 flags; | |
695 | int max_num_msgs; | |
696 | u16 max_write_len; | |
697 | u16 max_read_len; | |
698 | u16 max_comb_1st_msg_len; | |
699 | u16 max_comb_2nd_msg_len; | |
700 | }; | |
701 | ||
702 | /* enforce max_num_msgs = 2 and use max_comb_*_len for length checks */ | |
703 | #define I2C_AQ_COMB BIT(0) | |
704 | /* first combined message must be write */ | |
705 | #define I2C_AQ_COMB_WRITE_FIRST BIT(1) | |
706 | /* second combined message must be read */ | |
707 | #define I2C_AQ_COMB_READ_SECOND BIT(2) | |
708 | /* both combined messages must have the same target address */ | |
709 | #define I2C_AQ_COMB_SAME_ADDR BIT(3) | |
710 | /* convenience macro for typical write-then read case */ | |
711 | #define I2C_AQ_COMB_WRITE_THEN_READ (I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | \ | |
712 | I2C_AQ_COMB_READ_SECOND | I2C_AQ_COMB_SAME_ADDR) | |
749de3da NC |
713 | /* clock stretching is not supported */ |
714 | #define I2C_AQ_NO_CLK_STRETCH BIT(4) | |
d9cfe2ce WS |
715 | /* message cannot have length of 0 */ |
716 | #define I2C_AQ_NO_ZERO_LEN_READ BIT(5) | |
717 | #define I2C_AQ_NO_ZERO_LEN_WRITE BIT(6) | |
718 | #define I2C_AQ_NO_ZERO_LEN (I2C_AQ_NO_ZERO_LEN_READ | I2C_AQ_NO_ZERO_LEN_WRITE) | |
aca01415 BC |
719 | /* adapter cannot do repeated START */ |
720 | #define I2C_AQ_NO_REP_START BIT(7) | |
2187f03a | 721 | |
1da177e4 LT |
722 | /* |
723 | * i2c_adapter is the structure used to identify a physical i2c bus along | |
724 | * with the access algorithms necessary to access it. | |
725 | */ | |
726 | struct i2c_adapter { | |
727 | struct module *owner; | |
14f55f7a | 728 | unsigned int class; /* classes to allow probing for */ |
af71ff69 | 729 | const struct i2c_algorithm *algo; /* the algorithm to access the bus */ |
1da177e4 LT |
730 | void *algo_data; |
731 | ||
1da177e4 | 732 | /* data fields that are valid for all devices */ |
d1ed7985 | 733 | const struct i2c_lock_operations *lock_ops; |
194684e5 | 734 | struct rt_mutex bus_lock; |
6ef91fcc | 735 | struct rt_mutex mux_lock; |
1da177e4 | 736 | |
cd97f39b | 737 | int timeout; /* in jiffies */ |
1da177e4 LT |
738 | int retries; |
739 | struct device dev; /* the adapter device */ | |
9ac6cb5f | 740 | unsigned long locked_flags; /* owned by the I2C core */ |
4db61c2a WS |
741 | #define I2C_ALF_IS_SUSPENDED 0 |
742 | #define I2C_ALF_SUSPEND_REPORTED 1 | |
1da177e4 | 743 | |
1da177e4 | 744 | int nr; |
2096b956 | 745 | char name[48]; |
1da177e4 | 746 | struct completion dev_released; |
6629dcff | 747 | |
dafc50d1 | 748 | struct mutex userspace_clients_lock; |
6629dcff | 749 | struct list_head userspace_clients; |
5f9296ba VK |
750 | |
751 | struct i2c_bus_recovery_info *bus_recovery_info; | |
2187f03a | 752 | const struct i2c_adapter_quirks *quirks; |
4d5538f5 BT |
753 | |
754 | struct irq_domain *host_notify_domain; | |
5a7b95fb | 755 | struct regulator *bus_regulator; |
1da177e4 | 756 | }; |
ef2c8321 | 757 | #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev) |
1da177e4 | 758 | |
e1714daa | 759 | static inline void *i2c_get_adapdata(const struct i2c_adapter *adap) |
1da177e4 | 760 | { |
e1714daa | 761 | return dev_get_drvdata(&adap->dev); |
1da177e4 LT |
762 | } |
763 | ||
e1714daa | 764 | static inline void i2c_set_adapdata(struct i2c_adapter *adap, void *data) |
1da177e4 | 765 | { |
e1714daa | 766 | dev_set_drvdata(&adap->dev, data); |
1da177e4 LT |
767 | } |
768 | ||
97cc4d49 JD |
769 | static inline struct i2c_adapter * |
770 | i2c_parent_is_i2c_adapter(const struct i2c_adapter *adapter) | |
0826374b | 771 | { |
2fac2b89 | 772 | #if IS_ENABLED(CONFIG_I2C_MUX) |
97cc4d49 JD |
773 | struct device *parent = adapter->dev.parent; |
774 | ||
775 | if (parent != NULL && parent->type == &i2c_adapter_type) | |
776 | return to_i2c_adapter(parent); | |
777 | else | |
3923172b | 778 | #endif |
97cc4d49 | 779 | return NULL; |
0826374b ML |
780 | } |
781 | ||
d68222d4 | 782 | int i2c_for_each_dev(void *data, int (*fn)(struct device *dev, void *data)); |
7ae31482 | 783 | |
fe61e07e | 784 | /* Adapter locking functions, exported for shared pin cases */ |
8320f495 PR |
785 | #define I2C_LOCK_ROOT_ADAPTER BIT(0) |
786 | #define I2C_LOCK_SEGMENT BIT(1) | |
787 | ||
788 | /** | |
789 | * i2c_lock_bus - Get exclusive access to an I2C bus segment | |
790 | * @adapter: Target I2C bus segment | |
791 | * @flags: I2C_LOCK_ROOT_ADAPTER locks the root i2c adapter, I2C_LOCK_SEGMENT | |
792 | * locks only this branch in the adapter tree | |
793 | */ | |
794 | static inline void | |
795 | i2c_lock_bus(struct i2c_adapter *adapter, unsigned int flags) | |
796 | { | |
d1ed7985 | 797 | adapter->lock_ops->lock_bus(adapter, flags); |
8320f495 PR |
798 | } |
799 | ||
fb79e09a PR |
800 | /** |
801 | * i2c_trylock_bus - Try to get exclusive access to an I2C bus segment | |
802 | * @adapter: Target I2C bus segment | |
803 | * @flags: I2C_LOCK_ROOT_ADAPTER tries to locks the root i2c adapter, | |
804 | * I2C_LOCK_SEGMENT tries to lock only this branch in the adapter tree | |
805 | * | |
806 | * Return: true if the I2C bus segment is locked, false otherwise | |
807 | */ | |
808 | static inline int | |
809 | i2c_trylock_bus(struct i2c_adapter *adapter, unsigned int flags) | |
810 | { | |
d1ed7985 | 811 | return adapter->lock_ops->trylock_bus(adapter, flags); |
fb79e09a PR |
812 | } |
813 | ||
8320f495 PR |
814 | /** |
815 | * i2c_unlock_bus - Release exclusive access to an I2C bus segment | |
816 | * @adapter: Target I2C bus segment | |
817 | * @flags: I2C_LOCK_ROOT_ADAPTER unlocks the root i2c adapter, I2C_LOCK_SEGMENT | |
818 | * unlocks only this branch in the adapter tree | |
819 | */ | |
820 | static inline void | |
821 | i2c_unlock_bus(struct i2c_adapter *adapter, unsigned int flags) | |
822 | { | |
d1ed7985 | 823 | adapter->lock_ops->unlock_bus(adapter, flags); |
8320f495 PR |
824 | } |
825 | ||
9ac6cb5f WS |
826 | /** |
827 | * i2c_mark_adapter_suspended - Report suspended state of the adapter to the core | |
828 | * @adap: Adapter to mark as suspended | |
829 | * | |
830 | * When using this helper to mark an adapter as suspended, the core will reject | |
831 | * further transfers to this adapter. The usage of this helper is optional but | |
832 | * recommended for devices having distinct handlers for system suspend and | |
833 | * runtime suspend. More complex devices are free to implement custom solutions | |
834 | * to reject transfers when suspended. | |
835 | */ | |
836 | static inline void i2c_mark_adapter_suspended(struct i2c_adapter *adap) | |
837 | { | |
838 | i2c_lock_bus(adap, I2C_LOCK_ROOT_ADAPTER); | |
839 | set_bit(I2C_ALF_IS_SUSPENDED, &adap->locked_flags); | |
840 | i2c_unlock_bus(adap, I2C_LOCK_ROOT_ADAPTER); | |
841 | } | |
842 | ||
843 | /** | |
844 | * i2c_mark_adapter_resumed - Report resumed state of the adapter to the core | |
845 | * @adap: Adapter to mark as resumed | |
846 | * | |
847 | * When using this helper to mark an adapter as resumed, the core will allow | |
848 | * further transfers to this adapter. See also further notes to | |
849 | * @i2c_mark_adapter_suspended(). | |
850 | */ | |
851 | static inline void i2c_mark_adapter_resumed(struct i2c_adapter *adap) | |
852 | { | |
853 | i2c_lock_bus(adap, I2C_LOCK_ROOT_ADAPTER); | |
854 | clear_bit(I2C_ALF_IS_SUSPENDED, &adap->locked_flags); | |
855 | i2c_unlock_bus(adap, I2C_LOCK_ROOT_ADAPTER); | |
856 | } | |
857 | ||
1da177e4 LT |
858 | /* i2c adapter classes (bitmask) */ |
859 | #define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */ | |
c1b6b4f2 | 860 | #define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */ |
774466ad | 861 | #define I2C_CLASS_SPD (1<<7) /* Memory modules */ |
9c800349 WS |
862 | /* Warn users that the adapter doesn't support classes anymore */ |
863 | #define I2C_CLASS_DEPRECATED (1<<8) | |
1da177e4 | 864 | |
1da177e4 LT |
865 | /* Internal numbers to terminate lists */ |
866 | #define I2C_CLIENT_END 0xfffeU | |
1da177e4 | 867 | |
c7036673 HV |
868 | /* Construct an I2C_CLIENT_END-terminated array of i2c addresses */ |
869 | #define I2C_ADDRS(addr, addrs...) \ | |
870 | ((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END }) | |
871 | ||
1da177e4 LT |
872 | |
873 | /* ----- functions exported by i2c.o */ | |
874 | ||
875 | /* administration... | |
876 | */ | |
901a891f | 877 | #if IS_ENABLED(CONFIG_I2C) |
c807da53 | 878 | int i2c_add_adapter(struct i2c_adapter *adap); |
07740c92 | 879 | int devm_i2c_add_adapter(struct device *dev, struct i2c_adapter *adapter); |
c807da53 LC |
880 | void i2c_del_adapter(struct i2c_adapter *adap); |
881 | int i2c_add_numbered_adapter(struct i2c_adapter *adap); | |
1da177e4 | 882 | |
c807da53 LC |
883 | int i2c_register_driver(struct module *owner, struct i2c_driver *driver); |
884 | void i2c_del_driver(struct i2c_driver *driver); | |
1da177e4 | 885 | |
eb5589a8 PG |
886 | /* use a define to avoid include chaining to get THIS_MODULE */ |
887 | #define i2c_add_driver(driver) \ | |
888 | i2c_register_driver(THIS_MODULE, driver) | |
de59cf9e | 889 | |
8c9312a9 WS |
890 | static inline bool i2c_client_has_driver(struct i2c_client *client) |
891 | { | |
892 | return !IS_ERR_OR_NULL(client) && client->dev.driver; | |
893 | } | |
894 | ||
1da177e4 LT |
895 | /* call the i2c_client->command() of all attached clients with |
896 | * the given arguments */ | |
c807da53 LC |
897 | void i2c_clients_command(struct i2c_adapter *adap, |
898 | unsigned int cmd, void *arg); | |
1da177e4 | 899 | |
c807da53 LC |
900 | struct i2c_adapter *i2c_get_adapter(int nr); |
901 | void i2c_put_adapter(struct i2c_adapter *adap); | |
902 | unsigned int i2c_adapter_depth(struct i2c_adapter *adapter); | |
1da177e4 | 903 | |
e1dba01c | 904 | void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults); |
1da177e4 LT |
905 | |
906 | /* Return the functionality mask */ | |
907 | static inline u32 i2c_get_functionality(struct i2c_adapter *adap) | |
908 | { | |
909 | return adap->algo->functionality(adap); | |
910 | } | |
911 | ||
912 | /* Return 1 if adapter supports everything we need, 0 if not. */ | |
913 | static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func) | |
914 | { | |
915 | return (func & i2c_get_functionality(adap)) == func; | |
916 | } | |
917 | ||
cfa576db NC |
918 | /** |
919 | * i2c_check_quirks() - Function for checking the quirk flags in an i2c adapter | |
920 | * @adap: i2c adapter | |
921 | * @quirks: quirk flags | |
922 | * | |
923 | * Return: true if the adapter has all the specified quirk flags, false if not | |
924 | */ | |
925 | static inline bool i2c_check_quirks(struct i2c_adapter *adap, u64 quirks) | |
926 | { | |
927 | if (!adap->quirks) | |
928 | return false; | |
929 | return (adap->quirks->flags & quirks) == quirks; | |
930 | } | |
931 | ||
3ae70dee | 932 | /* Return the adapter number for a specific adapter */ |
cdcb1921 JD |
933 | static inline int i2c_adapter_id(struct i2c_adapter *adap) |
934 | { | |
935 | return adap->nr; | |
936 | } | |
7c92784a | 937 | |
a16d6ebc WS |
938 | static inline u8 i2c_8bit_addr_from_msg(const struct i2c_msg *msg) |
939 | { | |
940 | return (msg->addr << 1) | (msg->flags & I2C_M_RD ? 1 : 0); | |
941 | } | |
942 | ||
e94bc5d1 | 943 | u8 *i2c_get_dma_safe_msg_buf(struct i2c_msg *msg, unsigned int threshold); |
82fe39a6 | 944 | void i2c_put_dma_safe_msg_buf(u8 *buf, struct i2c_msg *msg, bool xferred); |
e94bc5d1 | 945 | |
4d5538f5 | 946 | int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr); |
7c92784a | 947 | /** |
c698d639 | 948 | * module_i2c_driver() - Helper macro for registering a modular I2C driver |
7c92784a LPC |
949 | * @__i2c_driver: i2c_driver struct |
950 | * | |
951 | * Helper macro for I2C drivers which do not do anything special in module | |
952 | * init/exit. This eliminates a lot of boilerplate. Each module may only | |
953 | * use this macro once, and calling it replaces module_init() and module_exit() | |
954 | */ | |
955 | #define module_i2c_driver(__i2c_driver) \ | |
956 | module_driver(__i2c_driver, i2c_add_driver, \ | |
957 | i2c_del_driver) | |
958 | ||
c698d639 PG |
959 | /** |
960 | * builtin_i2c_driver() - Helper macro for registering a builtin I2C driver | |
961 | * @__i2c_driver: i2c_driver struct | |
962 | * | |
963 | * Helper macro for I2C drivers which do not do anything special in their | |
964 | * init. This eliminates a lot of boilerplate. Each driver may only | |
965 | * use this macro once, and calling it replaces device_initcall(). | |
966 | */ | |
967 | #define builtin_i2c_driver(__i2c_driver) \ | |
968 | builtin_driver(__i2c_driver, i2c_add_driver) | |
969 | ||
23af8400 | 970 | #endif /* I2C */ |
907ddf89 | 971 | |
373c612d RKO |
972 | /* must call put_device() when done with returned i2c_client device */ |
973 | struct i2c_client *i2c_find_device_by_fwnode(struct fwnode_handle *fwnode); | |
974 | ||
975 | /* must call put_device() when done with returned i2c_adapter device */ | |
976 | struct i2c_adapter *i2c_find_adapter_by_fwnode(struct fwnode_handle *fwnode); | |
977 | ||
978 | /* must call i2c_put_adapter() when done with returned i2c_adapter device */ | |
979 | struct i2c_adapter *i2c_get_adapter_by_fwnode(struct fwnode_handle *fwnode); | |
980 | ||
687b81d0 WS |
981 | #if IS_ENABLED(CONFIG_OF) |
982 | /* must call put_device() when done with returned i2c_client device */ | |
373c612d RKO |
983 | static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) |
984 | { | |
985 | return i2c_find_device_by_fwnode(of_fwnode_handle(node)); | |
986 | } | |
687b81d0 WS |
987 | |
988 | /* must call put_device() when done with returned i2c_adapter device */ | |
373c612d RKO |
989 | static inline struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) |
990 | { | |
991 | return i2c_find_adapter_by_fwnode(of_fwnode_handle(node)); | |
992 | } | |
687b81d0 | 993 | |
48e9743d | 994 | /* must call i2c_put_adapter() when done with returned i2c_adapter device */ |
373c612d RKO |
995 | static inline struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node) |
996 | { | |
997 | return i2c_get_adapter_by_fwnode(of_fwnode_handle(node)); | |
998 | } | |
e1dba01c | 999 | |
c807da53 | 1000 | const struct of_device_id |
298d4de1 LJ |
1001 | *i2c_of_match_device(const struct of_device_id *matches, |
1002 | struct i2c_client *client); | |
1003 | ||
da0086d0 BB |
1004 | int of_i2c_get_board_info(struct device *dev, struct device_node *node, |
1005 | struct i2c_board_info *info); | |
1006 | ||
687b81d0 WS |
1007 | #else |
1008 | ||
1009 | static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) | |
1010 | { | |
1011 | return NULL; | |
1012 | } | |
1013 | ||
1014 | static inline struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) | |
1015 | { | |
1016 | return NULL; | |
1017 | } | |
48e9743d VZ |
1018 | |
1019 | static inline struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node) | |
1020 | { | |
1021 | return NULL; | |
1022 | } | |
298d4de1 LJ |
1023 | |
1024 | static inline const struct of_device_id | |
1025 | *i2c_of_match_device(const struct of_device_id *matches, | |
1026 | struct i2c_client *client) | |
1027 | { | |
1028 | return NULL; | |
1029 | } | |
1030 | ||
da0086d0 BB |
1031 | static inline int of_i2c_get_board_info(struct device *dev, |
1032 | struct device_node *node, | |
1033 | struct i2c_board_info *info) | |
1034 | { | |
1035 | return -ENOTSUPP; | |
1036 | } | |
1037 | ||
687b81d0 WS |
1038 | #endif /* CONFIG_OF */ |
1039 | ||
b33a02aa AS |
1040 | struct acpi_resource; |
1041 | struct acpi_resource_i2c_serialbus; | |
1042 | ||
5853b22d | 1043 | #if IS_ENABLED(CONFIG_ACPI) |
b33a02aa AS |
1044 | bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares, |
1045 | struct acpi_resource_i2c_serialbus **i2c); | |
20a1b3ac | 1046 | int i2c_acpi_client_count(struct acpi_device *adev); |
5853b22d | 1047 | u32 i2c_acpi_find_bus_speed(struct device *dev); |
c537be0b HG |
1048 | struct i2c_client *i2c_acpi_new_device_by_fwnode(struct fwnode_handle *fwnode, |
1049 | int index, | |
1050 | struct i2c_board_info *info); | |
5213d7ef | 1051 | struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle); |
b18c1ad6 | 1052 | bool i2c_acpi_waive_d0_probe(struct device *dev); |
5853b22d | 1053 | #else |
b33a02aa AS |
1054 | static inline bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares, |
1055 | struct acpi_resource_i2c_serialbus **i2c) | |
1056 | { | |
1057 | return false; | |
1058 | } | |
20a1b3ac HG |
1059 | static inline int i2c_acpi_client_count(struct acpi_device *adev) |
1060 | { | |
1061 | return 0; | |
1062 | } | |
5853b22d JN |
1063 | static inline u32 i2c_acpi_find_bus_speed(struct device *dev) |
1064 | { | |
1065 | return 0; | |
1066 | } | |
c537be0b HG |
1067 | static inline struct i2c_client *i2c_acpi_new_device_by_fwnode( |
1068 | struct fwnode_handle *fwnode, int index, | |
1069 | struct i2c_board_info *info) | |
605f8fc2 | 1070 | { |
8be23aec | 1071 | return ERR_PTR(-ENODEV); |
605f8fc2 | 1072 | } |
5213d7ef RB |
1073 | static inline struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle) |
1074 | { | |
1075 | return NULL; | |
1076 | } | |
b18c1ad6 SA |
1077 | static inline bool i2c_acpi_waive_d0_probe(struct device *dev) |
1078 | { | |
1079 | return false; | |
1080 | } | |
5853b22d JN |
1081 | #endif /* CONFIG_ACPI */ |
1082 | ||
c537be0b HG |
1083 | static inline struct i2c_client *i2c_acpi_new_device(struct device *dev, |
1084 | int index, | |
1085 | struct i2c_board_info *info) | |
1086 | { | |
1087 | return i2c_acpi_new_device_by_fwnode(dev_fwnode(dev), index, info); | |
1088 | } | |
1089 | ||
1da177e4 | 1090 | #endif /* _LINUX_I2C_H */ |