Commit | Line | Data |
---|---|---|
a603a7fa DB |
1 | /* |
2 | * twl4030.h - header for TWL4030 PM and audio CODEC device | |
3 | * | |
4 | * Copyright (C) 2005-2006 Texas Instruments, Inc. | |
5 | * | |
6 | * Based on tlv320aic23.c: | |
7 | * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License as published by | |
11 | * the Free Software Foundation; either version 2 of the License, or | |
12 | * (at your option) any later version. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program; if not, write to the Free Software | |
21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
22 | * | |
23 | */ | |
24 | ||
fc7b92fc B |
25 | #ifndef __TWL_H_ |
26 | #define __TWL_H_ | |
a603a7fa | 27 | |
9d834068 DB |
28 | #include <linux/types.h> |
29 | #include <linux/input/matrix_keypad.h> | |
30 | ||
a603a7fa DB |
31 | /* |
32 | * Using the twl4030 core we address registers using a pair | |
33 | * { module id, relative register offset } | |
34 | * which that core then maps to the relevant | |
35 | * { i2c slave, absolute register address } | |
36 | * | |
37 | * The module IDs are meaningful only to the twl4030 core code, | |
38 | * which uses them as array indices to look up the first register | |
39 | * address each module uses within a given i2c slave. | |
40 | */ | |
41 | ||
42 | /* Slave 0 (i2c address 0x48) */ | |
43 | #define TWL4030_MODULE_USB 0x00 | |
44 | ||
45 | /* Slave 1 (i2c address 0x49) */ | |
46 | #define TWL4030_MODULE_AUDIO_VOICE 0x01 | |
47 | #define TWL4030_MODULE_GPIO 0x02 | |
48 | #define TWL4030_MODULE_INTBR 0x03 | |
49 | #define TWL4030_MODULE_PIH 0x04 | |
50 | #define TWL4030_MODULE_TEST 0x05 | |
51 | ||
52 | /* Slave 2 (i2c address 0x4a) */ | |
53 | #define TWL4030_MODULE_KEYPAD 0x06 | |
54 | #define TWL4030_MODULE_MADC 0x07 | |
55 | #define TWL4030_MODULE_INTERRUPTS 0x08 | |
56 | #define TWL4030_MODULE_LED 0x09 | |
57 | #define TWL4030_MODULE_MAIN_CHARGE 0x0A | |
58 | #define TWL4030_MODULE_PRECHARGE 0x0B | |
59 | #define TWL4030_MODULE_PWM0 0x0C | |
60 | #define TWL4030_MODULE_PWM1 0x0D | |
61 | #define TWL4030_MODULE_PWMA 0x0E | |
62 | #define TWL4030_MODULE_PWMB 0x0F | |
63 | ||
1920a61e IK |
64 | #define TWL5031_MODULE_ACCESSORY 0x10 |
65 | #define TWL5031_MODULE_INTERRUPTS 0x11 | |
66 | ||
a603a7fa | 67 | /* Slave 3 (i2c address 0x4b) */ |
1920a61e IK |
68 | #define TWL4030_MODULE_BACKUP 0x12 |
69 | #define TWL4030_MODULE_INT 0x13 | |
70 | #define TWL4030_MODULE_PM_MASTER 0x14 | |
71 | #define TWL4030_MODULE_PM_RECEIVER 0x15 | |
72 | #define TWL4030_MODULE_RTC 0x16 | |
73 | #define TWL4030_MODULE_SECURED_REG 0x17 | |
a603a7fa | 74 | |
fc7b92fc B |
75 | #define TWL_MODULE_USB TWL4030_MODULE_USB |
76 | #define TWL_MODULE_AUDIO_VOICE TWL4030_MODULE_AUDIO_VOICE | |
77 | #define TWL_MODULE_PIH TWL4030_MODULE_PIH | |
78 | #define TWL_MODULE_MADC TWL4030_MODULE_MADC | |
79 | #define TWL_MODULE_MAIN_CHARGE TWL4030_MODULE_MAIN_CHARGE | |
80 | #define TWL_MODULE_PM_MASTER TWL4030_MODULE_PM_MASTER | |
81 | #define TWL_MODULE_PM_RECEIVER TWL4030_MODULE_PM_RECEIVER | |
82 | #define TWL_MODULE_RTC TWL4030_MODULE_RTC | |
83 | ||
84 | #define GPIO_INTR_OFFSET 0 | |
85 | #define KEYPAD_INTR_OFFSET 1 | |
86 | #define BCI_INTR_OFFSET 2 | |
87 | #define MADC_INTR_OFFSET 3 | |
88 | #define USB_INTR_OFFSET 4 | |
89 | #define BCI_PRES_INTR_OFFSET 9 | |
90 | #define USB_PRES_INTR_OFFSET 10 | |
91 | #define RTC_INTR_OFFSET 11 | |
e8deb28c B |
92 | |
93 | /* | |
94 | * Offset from TWL6030_IRQ_BASE / pdata->irq_base | |
95 | */ | |
96 | #define PWR_INTR_OFFSET 0 | |
97 | #define HOTDIE_INTR_OFFSET 12 | |
98 | #define SMPSLDO_INTR_OFFSET 13 | |
99 | #define BATDETECT_INTR_OFFSET 14 | |
100 | #define SIMDETECT_INTR_OFFSET 15 | |
101 | #define MMCDETECT_INTR_OFFSET 16 | |
102 | #define GASGAUGE_INTR_OFFSET 17 | |
103 | #define USBOTG_INTR_OFFSET 4 | |
104 | #define CHARGER_INTR_OFFSET 2 | |
105 | #define RSV_INTR_OFFSET 0 | |
106 | ||
107 | /* INT register offsets */ | |
108 | #define REG_INT_STS_A 0x00 | |
109 | #define REG_INT_STS_B 0x01 | |
110 | #define REG_INT_STS_C 0x02 | |
111 | ||
112 | #define REG_INT_MSK_LINE_A 0x03 | |
113 | #define REG_INT_MSK_LINE_B 0x04 | |
114 | #define REG_INT_MSK_LINE_C 0x05 | |
115 | ||
116 | #define REG_INT_MSK_STS_A 0x06 | |
117 | #define REG_INT_MSK_STS_B 0x07 | |
118 | #define REG_INT_MSK_STS_C 0x08 | |
119 | ||
120 | /* MASK INT REG GROUP A */ | |
121 | #define TWL6030_PWR_INT_MASK 0x07 | |
122 | #define TWL6030_RTC_INT_MASK 0x18 | |
123 | #define TWL6030_HOTDIE_INT_MASK 0x20 | |
124 | #define TWL6030_SMPSLDOA_INT_MASK 0xC0 | |
125 | ||
126 | /* MASK INT REG GROUP B */ | |
127 | #define TWL6030_SMPSLDOB_INT_MASK 0x01 | |
128 | #define TWL6030_BATDETECT_INT_MASK 0x02 | |
129 | #define TWL6030_SIMDETECT_INT_MASK 0x04 | |
130 | #define TWL6030_MMCDETECT_INT_MASK 0x08 | |
131 | #define TWL6030_GPADC_INT_MASK 0x60 | |
132 | #define TWL6030_GASGAUGE_INT_MASK 0x80 | |
133 | ||
134 | /* MASK INT REG GROUP C */ | |
135 | #define TWL6030_USBOTG_INT_MASK 0x0F | |
136 | #define TWL6030_CHARGER_CTRL_INT_MASK 0x10 | |
137 | #define TWL6030_CHARGER_FAULT_INT_MASK 0x60 | |
138 | ||
139 | ||
140 | #define TWL4030_CLASS_ID 0x4030 | |
141 | #define TWL6030_CLASS_ID 0x6030 | |
142 | unsigned int twl_rev(void); | |
143 | #define GET_TWL_REV (twl_rev()) | |
144 | #define TWL_CLASS_IS(class, id) \ | |
145 | static inline int twl_class_is_ ##class(void) \ | |
146 | { \ | |
147 | return ((id) == (GET_TWL_REV)) ? 1 : 0; \ | |
148 | } | |
149 | ||
150 | TWL_CLASS_IS(4030, TWL4030_CLASS_ID) | |
151 | TWL_CLASS_IS(6030, TWL6030_CLASS_ID) | |
152 | ||
a603a7fa DB |
153 | /* |
154 | * Read and write single 8-bit registers | |
155 | */ | |
fc7b92fc B |
156 | int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg); |
157 | int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); | |
a603a7fa DB |
158 | |
159 | /* | |
160 | * Read and write several 8-bit registers at once. | |
161 | * | |
fc7b92fc | 162 | * IMPORTANT: For twl_i2c_write(), allocate num_bytes + 1 |
a603a7fa DB |
163 | * for the value, and populate your data starting at offset 1. |
164 | */ | |
fc7b92fc B |
165 | int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); |
166 | int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); | |
a603a7fa | 167 | |
e8deb28c B |
168 | int twl6030_interrupt_unmask(u8 bit_mask, u8 offset); |
169 | int twl6030_interrupt_mask(u8 bit_mask, u8 offset); | |
170 | ||
a603a7fa DB |
171 | /*----------------------------------------------------------------------*/ |
172 | ||
173 | /* | |
174 | * NOTE: at up to 1024 registers, this is a big chip. | |
175 | * | |
176 | * Avoid putting register declarations in this file, instead of into | |
177 | * a driver-private file, unless some of the registers in a block | |
178 | * need to be shared with other drivers. One example is blocks that | |
179 | * have Secondary IRQ Handler (SIH) registers. | |
180 | */ | |
181 | ||
182 | #define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0) | |
183 | #define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1) | |
184 | #define TWL4030_SIH_CTRL_COR_MASK BIT(2) | |
185 | ||
186 | /*----------------------------------------------------------------------*/ | |
187 | ||
188 | /* | |
189 | * GPIO Block Register offsets (use TWL4030_MODULE_GPIO) | |
190 | */ | |
191 | ||
192 | #define REG_GPIODATAIN1 0x0 | |
193 | #define REG_GPIODATAIN2 0x1 | |
194 | #define REG_GPIODATAIN3 0x2 | |
195 | #define REG_GPIODATADIR1 0x3 | |
196 | #define REG_GPIODATADIR2 0x4 | |
197 | #define REG_GPIODATADIR3 0x5 | |
198 | #define REG_GPIODATAOUT1 0x6 | |
199 | #define REG_GPIODATAOUT2 0x7 | |
200 | #define REG_GPIODATAOUT3 0x8 | |
201 | #define REG_CLEARGPIODATAOUT1 0x9 | |
202 | #define REG_CLEARGPIODATAOUT2 0xA | |
203 | #define REG_CLEARGPIODATAOUT3 0xB | |
204 | #define REG_SETGPIODATAOUT1 0xC | |
205 | #define REG_SETGPIODATAOUT2 0xD | |
206 | #define REG_SETGPIODATAOUT3 0xE | |
207 | #define REG_GPIO_DEBEN1 0xF | |
208 | #define REG_GPIO_DEBEN2 0x10 | |
209 | #define REG_GPIO_DEBEN3 0x11 | |
210 | #define REG_GPIO_CTRL 0x12 | |
211 | #define REG_GPIOPUPDCTR1 0x13 | |
212 | #define REG_GPIOPUPDCTR2 0x14 | |
213 | #define REG_GPIOPUPDCTR3 0x15 | |
214 | #define REG_GPIOPUPDCTR4 0x16 | |
215 | #define REG_GPIOPUPDCTR5 0x17 | |
216 | #define REG_GPIO_ISR1A 0x19 | |
217 | #define REG_GPIO_ISR2A 0x1A | |
218 | #define REG_GPIO_ISR3A 0x1B | |
219 | #define REG_GPIO_IMR1A 0x1C | |
220 | #define REG_GPIO_IMR2A 0x1D | |
221 | #define REG_GPIO_IMR3A 0x1E | |
222 | #define REG_GPIO_ISR1B 0x1F | |
223 | #define REG_GPIO_ISR2B 0x20 | |
224 | #define REG_GPIO_ISR3B 0x21 | |
225 | #define REG_GPIO_IMR1B 0x22 | |
226 | #define REG_GPIO_IMR2B 0x23 | |
227 | #define REG_GPIO_IMR3B 0x24 | |
228 | #define REG_GPIO_EDR1 0x28 | |
229 | #define REG_GPIO_EDR2 0x29 | |
230 | #define REG_GPIO_EDR3 0x2A | |
231 | #define REG_GPIO_EDR4 0x2B | |
232 | #define REG_GPIO_EDR5 0x2C | |
233 | #define REG_GPIO_SIH_CTRL 0x2D | |
234 | ||
235 | /* Up to 18 signals are available as GPIOs, when their | |
236 | * pins are not assigned to another use (such as ULPI/USB). | |
237 | */ | |
238 | #define TWL4030_GPIO_MAX 18 | |
239 | ||
240 | /*----------------------------------------------------------------------*/ | |
241 | ||
242 | /* | |
243 | * Keypad register offsets (use TWL4030_MODULE_KEYPAD) | |
244 | * ... SIH/interrupt only | |
245 | */ | |
246 | ||
247 | #define TWL4030_KEYPAD_KEYP_ISR1 0x11 | |
248 | #define TWL4030_KEYPAD_KEYP_IMR1 0x12 | |
249 | #define TWL4030_KEYPAD_KEYP_ISR2 0x13 | |
250 | #define TWL4030_KEYPAD_KEYP_IMR2 0x14 | |
251 | #define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */ | |
252 | #define TWL4030_KEYPAD_KEYP_EDR 0x16 | |
253 | #define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17 | |
254 | ||
255 | /*----------------------------------------------------------------------*/ | |
256 | ||
257 | /* | |
258 | * Multichannel ADC register offsets (use TWL4030_MODULE_MADC) | |
259 | * ... SIH/interrupt only | |
260 | */ | |
261 | ||
262 | #define TWL4030_MADC_ISR1 0x61 | |
263 | #define TWL4030_MADC_IMR1 0x62 | |
264 | #define TWL4030_MADC_ISR2 0x63 | |
265 | #define TWL4030_MADC_IMR2 0x64 | |
266 | #define TWL4030_MADC_SIR 0x65 /* test register */ | |
267 | #define TWL4030_MADC_EDR 0x66 | |
268 | #define TWL4030_MADC_SIH_CTRL 0x67 | |
269 | ||
270 | /*----------------------------------------------------------------------*/ | |
271 | ||
272 | /* | |
273 | * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS) | |
274 | */ | |
275 | ||
276 | #define TWL4030_INTERRUPTS_BCIISR1A 0x0 | |
277 | #define TWL4030_INTERRUPTS_BCIISR2A 0x1 | |
278 | #define TWL4030_INTERRUPTS_BCIIMR1A 0x2 | |
279 | #define TWL4030_INTERRUPTS_BCIIMR2A 0x3 | |
280 | #define TWL4030_INTERRUPTS_BCIISR1B 0x4 | |
281 | #define TWL4030_INTERRUPTS_BCIISR2B 0x5 | |
282 | #define TWL4030_INTERRUPTS_BCIIMR1B 0x6 | |
283 | #define TWL4030_INTERRUPTS_BCIIMR2B 0x7 | |
284 | #define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */ | |
285 | #define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */ | |
286 | #define TWL4030_INTERRUPTS_BCIEDR1 0xa | |
287 | #define TWL4030_INTERRUPTS_BCIEDR2 0xb | |
288 | #define TWL4030_INTERRUPTS_BCIEDR3 0xc | |
289 | #define TWL4030_INTERRUPTS_BCISIHCTRL 0xd | |
290 | ||
291 | /*----------------------------------------------------------------------*/ | |
292 | ||
293 | /* | |
294 | * Power Interrupt block register offsets (use TWL4030_MODULE_INT) | |
295 | */ | |
296 | ||
297 | #define TWL4030_INT_PWR_ISR1 0x0 | |
298 | #define TWL4030_INT_PWR_IMR1 0x1 | |
299 | #define TWL4030_INT_PWR_ISR2 0x2 | |
300 | #define TWL4030_INT_PWR_IMR2 0x3 | |
301 | #define TWL4030_INT_PWR_SIR 0x4 /* test register */ | |
302 | #define TWL4030_INT_PWR_EDR1 0x5 | |
303 | #define TWL4030_INT_PWR_EDR2 0x6 | |
304 | #define TWL4030_INT_PWR_SIH_CTRL 0x7 | |
305 | ||
306 | /*----------------------------------------------------------------------*/ | |
307 | ||
1920a61e IK |
308 | /* |
309 | * Accessory Interrupts | |
310 | */ | |
311 | #define TWL5031_ACIIMR_LSB 0x05 | |
312 | #define TWL5031_ACIIMR_MSB 0x06 | |
313 | #define TWL5031_ACIIDR_LSB 0x07 | |
314 | #define TWL5031_ACIIDR_MSB 0x08 | |
315 | #define TWL5031_ACCISR1 0x0F | |
316 | #define TWL5031_ACCIMR1 0x10 | |
317 | #define TWL5031_ACCISR2 0x11 | |
318 | #define TWL5031_ACCIMR2 0x12 | |
319 | #define TWL5031_ACCSIR 0x13 | |
320 | #define TWL5031_ACCEDR1 0x14 | |
321 | #define TWL5031_ACCSIHCTRL 0x15 | |
322 | ||
323 | /*----------------------------------------------------------------------*/ | |
324 | ||
325 | /* | |
326 | * Battery Charger Controller | |
327 | */ | |
328 | ||
329 | #define TWL5031_INTERRUPTS_BCIISR1 0x0 | |
330 | #define TWL5031_INTERRUPTS_BCIIMR1 0x1 | |
331 | #define TWL5031_INTERRUPTS_BCIISR2 0x2 | |
332 | #define TWL5031_INTERRUPTS_BCIIMR2 0x3 | |
333 | #define TWL5031_INTERRUPTS_BCISIR 0x4 | |
334 | #define TWL5031_INTERRUPTS_BCIEDR1 0x5 | |
335 | #define TWL5031_INTERRUPTS_BCIEDR2 0x6 | |
336 | #define TWL5031_INTERRUPTS_BCISIHCTRL 0x7 | |
337 | ||
338 | /*----------------------------------------------------------------------*/ | |
339 | ||
fa16a5c1 DB |
340 | /* Power bus message definitions */ |
341 | ||
ebf0bd36 AK |
342 | /* The TWL4030/5030 splits its power-management resources (the various |
343 | * regulators, clock and reset lines) into 3 processor groups - P1, P2 and | |
344 | * P3. These groups can then be configured to transition between sleep, wait-on | |
345 | * and active states by sending messages to the power bus. See Section 5.4.2 | |
346 | * Power Resources of TWL4030 TRM | |
347 | */ | |
fa16a5c1 | 348 | |
ebf0bd36 AK |
349 | /* Processor groups */ |
350 | #define DEV_GRP_NULL 0x0 | |
351 | #define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ | |
352 | #define DEV_GRP_P2 0x2 /* P2: all Modem devices */ | |
353 | #define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ | |
354 | ||
355 | /* Resource groups */ | |
356 | #define RES_GRP_RES 0x0 /* Reserved */ | |
357 | #define RES_GRP_PP 0x1 /* Power providers */ | |
358 | #define RES_GRP_RC 0x2 /* Reset and control */ | |
fa16a5c1 | 359 | #define RES_GRP_PP_RC 0x3 |
ebf0bd36 | 360 | #define RES_GRP_PR 0x4 /* Power references */ |
fa16a5c1 DB |
361 | #define RES_GRP_PP_PR 0x5 |
362 | #define RES_GRP_RC_PR 0x6 | |
ebf0bd36 | 363 | #define RES_GRP_ALL 0x7 /* All resource groups */ |
fa16a5c1 DB |
364 | |
365 | #define RES_TYPE2_R0 0x0 | |
366 | ||
367 | #define RES_TYPE_ALL 0x7 | |
368 | ||
b4ead61e | 369 | /* Resource states */ |
fa16a5c1 DB |
370 | #define RES_STATE_WRST 0xF |
371 | #define RES_STATE_ACTIVE 0xE | |
372 | #define RES_STATE_SLEEP 0x8 | |
373 | #define RES_STATE_OFF 0x0 | |
374 | ||
ebf0bd36 AK |
375 | /* Power resources */ |
376 | ||
377 | /* Power providers */ | |
378 | #define RES_VAUX1 1 | |
379 | #define RES_VAUX2 2 | |
380 | #define RES_VAUX3 3 | |
381 | #define RES_VAUX4 4 | |
382 | #define RES_VMMC1 5 | |
383 | #define RES_VMMC2 6 | |
384 | #define RES_VPLL1 7 | |
385 | #define RES_VPLL2 8 | |
386 | #define RES_VSIM 9 | |
387 | #define RES_VDAC 10 | |
388 | #define RES_VINTANA1 11 | |
389 | #define RES_VINTANA2 12 | |
390 | #define RES_VINTDIG 13 | |
391 | #define RES_VIO 14 | |
392 | #define RES_VDD1 15 | |
393 | #define RES_VDD2 16 | |
394 | #define RES_VUSB_1V5 17 | |
395 | #define RES_VUSB_1V8 18 | |
396 | #define RES_VUSB_3V1 19 | |
397 | #define RES_VUSBCP 20 | |
398 | #define RES_REGEN 21 | |
399 | /* Reset and control */ | |
400 | #define RES_NRES_PWRON 22 | |
401 | #define RES_CLKEN 23 | |
402 | #define RES_SYSEN 24 | |
403 | #define RES_HFCLKOUT 25 | |
404 | #define RES_32KCLKOUT 26 | |
405 | #define RES_RESET 27 | |
406 | /* Power Reference */ | |
407 | #define RES_Main_Ref 28 | |
408 | ||
409 | #define TOTAL_RESOURCES 28 | |
fa16a5c1 DB |
410 | /* |
411 | * Power Bus Message Format ... these can be sent individually by Linux, | |
412 | * but are usually part of downloaded scripts that are run when various | |
413 | * power events are triggered. | |
414 | * | |
415 | * Broadcast Message (16 Bits): | |
416 | * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4] | |
417 | * RES_STATE[3:0] | |
418 | * | |
419 | * Singular Message (16 Bits): | |
420 | * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] | |
421 | */ | |
422 | ||
423 | #define MSG_BROADCAST(devgrp, grp, type, type2, state) \ | |
424 | ( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \ | |
425 | | (type) << 4 | (state)) | |
426 | ||
427 | #define MSG_SINGULAR(devgrp, id, state) \ | |
428 | ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state)) | |
429 | ||
441a4505 RN |
430 | #define MSG_BROADCAST_ALL(devgrp, state) \ |
431 | ((devgrp) << 5 | (state)) | |
432 | ||
433 | #define MSG_BROADCAST_REF MSG_BROADCAST_ALL | |
434 | #define MSG_BROADCAST_PROV MSG_BROADCAST_ALL | |
435 | #define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL | |
fa16a5c1 DB |
436 | /*----------------------------------------------------------------------*/ |
437 | ||
38a68496 IK |
438 | struct twl4030_clock_init_data { |
439 | bool ck32k_lowpwr_enable; | |
440 | }; | |
441 | ||
a603a7fa DB |
442 | struct twl4030_bci_platform_data { |
443 | int *battery_tmp_tbl; | |
444 | unsigned int tblsize; | |
445 | }; | |
446 | ||
447 | /* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */ | |
448 | struct twl4030_gpio_platform_data { | |
449 | int gpio_base; | |
450 | unsigned irq_base, irq_end; | |
451 | ||
a30d46c0 DB |
452 | /* package the two LED signals as output-only GPIOs? */ |
453 | bool use_leds; | |
454 | ||
455 | /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */ | |
456 | u8 mmc_cd; | |
457 | ||
cabb3fc4 DB |
458 | /* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */ |
459 | u32 debounce; | |
460 | ||
a603a7fa DB |
461 | /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup |
462 | * should be enabled. Else, if that bit is set in "pulldowns", | |
463 | * that pulldown is enabled. Don't waste power by letting any | |
464 | * digital inputs float... | |
465 | */ | |
466 | u32 pullups; | |
467 | u32 pulldowns; | |
468 | ||
469 | int (*setup)(struct device *dev, | |
470 | unsigned gpio, unsigned ngpio); | |
471 | int (*teardown)(struct device *dev, | |
472 | unsigned gpio, unsigned ngpio); | |
473 | }; | |
474 | ||
475 | struct twl4030_madc_platform_data { | |
476 | int irq_line; | |
477 | }; | |
478 | ||
acf442dc AK |
479 | /* Boards have uniqe mappings of {row, col} --> keycode. |
480 | * Column and row are 8 bits each, but range only from 0..7. | |
9d834068 DB |
481 | * a PERSISTENT_KEY is "always on" and never reported. |
482 | */ | |
acf442dc | 483 | #define PERSISTENT_KEY(r, c) KEY((r), (c), KEY_RESERVED) |
9d834068 | 484 | |
a603a7fa | 485 | struct twl4030_keypad_data { |
9d834068 DB |
486 | const struct matrix_keymap_data *keymap_data; |
487 | unsigned rows; | |
488 | unsigned cols; | |
489 | bool rep; | |
a603a7fa DB |
490 | }; |
491 | ||
492 | enum twl4030_usb_mode { | |
493 | T2_USB_MODE_ULPI = 1, | |
494 | T2_USB_MODE_CEA2011_3PIN = 2, | |
495 | }; | |
496 | ||
497 | struct twl4030_usb_data { | |
498 | enum twl4030_usb_mode usb_mode; | |
499 | }; | |
500 | ||
ebf0bd36 AK |
501 | struct twl4030_ins { |
502 | u16 pmb_message; | |
503 | u8 delay; | |
504 | }; | |
505 | ||
506 | struct twl4030_script { | |
507 | struct twl4030_ins *script; | |
508 | unsigned size; | |
509 | u8 flags; | |
510 | #define TWL4030_WRST_SCRIPT (1<<0) | |
511 | #define TWL4030_WAKEUP12_SCRIPT (1<<1) | |
512 | #define TWL4030_WAKEUP3_SCRIPT (1<<2) | |
513 | #define TWL4030_SLEEP_SCRIPT (1<<3) | |
514 | }; | |
515 | ||
516 | struct twl4030_resconfig { | |
517 | u8 resource; | |
518 | u8 devgroup; /* Processor group that Power resource belongs to */ | |
519 | u8 type; /* Power resource addressed, 6 / broadcast message */ | |
520 | u8 type2; /* Power resource addressed, 3 / broadcast message */ | |
b4ead61e AK |
521 | u8 remap_off; /* off state remapping */ |
522 | u8 remap_sleep; /* sleep state remapping */ | |
ebf0bd36 AK |
523 | }; |
524 | ||
525 | struct twl4030_power_data { | |
526 | struct twl4030_script **scripts; | |
527 | unsigned num; | |
528 | struct twl4030_resconfig *resource_config; | |
56baa667 | 529 | #define TWL4030_RESCONFIG_UNDEF ((u8)-1) |
ebf0bd36 AK |
530 | }; |
531 | ||
532 | extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); | |
533 | ||
0b83ddeb PU |
534 | struct twl4030_codec_audio_data { |
535 | unsigned int audio_mclk; | |
536 | unsigned int ramp_delay_value; | |
537 | unsigned int hs_extmute:1; | |
538 | void (*set_hs_extmute)(int mute); | |
539 | }; | |
540 | ||
541 | struct twl4030_codec_vibra_data { | |
542 | unsigned int audio_mclk; | |
543 | unsigned int coexist; | |
544 | }; | |
545 | ||
546 | struct twl4030_codec_data { | |
cfd5324e | 547 | unsigned int audio_mclk; |
0b83ddeb PU |
548 | struct twl4030_codec_audio_data *audio; |
549 | struct twl4030_codec_vibra_data *vibra; | |
550 | }; | |
551 | ||
a603a7fa DB |
552 | struct twl4030_platform_data { |
553 | unsigned irq_base, irq_end; | |
38a68496 | 554 | struct twl4030_clock_init_data *clock; |
a603a7fa DB |
555 | struct twl4030_bci_platform_data *bci; |
556 | struct twl4030_gpio_platform_data *gpio; | |
557 | struct twl4030_madc_platform_data *madc; | |
558 | struct twl4030_keypad_data *keypad; | |
559 | struct twl4030_usb_data *usb; | |
ebf0bd36 | 560 | struct twl4030_power_data *power; |
0b83ddeb | 561 | struct twl4030_codec_data *codec; |
a603a7fa | 562 | |
dad759ff DB |
563 | /* LDO regulators */ |
564 | struct regulator_init_data *vdac; | |
565 | struct regulator_init_data *vpll1; | |
566 | struct regulator_init_data *vpll2; | |
567 | struct regulator_init_data *vmmc1; | |
568 | struct regulator_init_data *vmmc2; | |
569 | struct regulator_init_data *vsim; | |
570 | struct regulator_init_data *vaux1; | |
571 | struct regulator_init_data *vaux2; | |
572 | struct regulator_init_data *vaux3; | |
573 | struct regulator_init_data *vaux4; | |
ab4abe05 JKS |
574 | struct regulator_init_data *vio; |
575 | struct regulator_init_data *vdd1; | |
576 | struct regulator_init_data *vdd2; | |
577 | struct regulator_init_data *vintana1; | |
578 | struct regulator_init_data *vintana2; | |
579 | struct regulator_init_data *vintdig; | |
a603a7fa DB |
580 | }; |
581 | ||
582 | /*----------------------------------------------------------------------*/ | |
583 | ||
a30d46c0 DB |
584 | int twl4030_sih_setup(int module); |
585 | ||
a603a7fa DB |
586 | /* Offsets to Power Registers */ |
587 | #define TWL4030_VDAC_DEV_GRP 0x3B | |
588 | #define TWL4030_VDAC_DEDICATED 0x3E | |
589 | #define TWL4030_VAUX1_DEV_GRP 0x17 | |
590 | #define TWL4030_VAUX1_DEDICATED 0x1A | |
591 | #define TWL4030_VAUX2_DEV_GRP 0x1B | |
592 | #define TWL4030_VAUX2_DEDICATED 0x1E | |
593 | #define TWL4030_VAUX3_DEV_GRP 0x1F | |
594 | #define TWL4030_VAUX3_DEDICATED 0x22 | |
595 | ||
a603a7fa DB |
596 | #if defined(CONFIG_TWL4030_BCI_BATTERY) || \ |
597 | defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) | |
598 | extern int twl4030charger_usb_en(int enable); | |
599 | #else | |
600 | static inline int twl4030charger_usb_en(int enable) { return 0; } | |
601 | #endif | |
602 | ||
dad759ff DB |
603 | /*----------------------------------------------------------------------*/ |
604 | ||
605 | /* Linux-specific regulator identifiers ... for now, we only support | |
606 | * the LDOs, and leave the three buck converters alone. VDD1 and VDD2 | |
607 | * need to tie into hardware based voltage scaling (cpufreq etc), while | |
608 | * VIO is generally fixed. | |
609 | */ | |
610 | ||
441a4505 | 611 | /* TWL4030 SMPS/LDO's */ |
dad759ff DB |
612 | /* EXTERNAL dc-to-dc buck converters */ |
613 | #define TWL4030_REG_VDD1 0 | |
614 | #define TWL4030_REG_VDD2 1 | |
615 | #define TWL4030_REG_VIO 2 | |
616 | ||
617 | /* EXTERNAL LDOs */ | |
618 | #define TWL4030_REG_VDAC 3 | |
619 | #define TWL4030_REG_VPLL1 4 | |
620 | #define TWL4030_REG_VPLL2 5 /* not on all chips */ | |
621 | #define TWL4030_REG_VMMC1 6 | |
622 | #define TWL4030_REG_VMMC2 7 /* not on all chips */ | |
623 | #define TWL4030_REG_VSIM 8 /* not on all chips */ | |
624 | #define TWL4030_REG_VAUX1 9 /* not on all chips */ | |
625 | #define TWL4030_REG_VAUX2_4030 10 /* (twl4030-specific) */ | |
626 | #define TWL4030_REG_VAUX2 11 /* (twl5030 and newer) */ | |
627 | #define TWL4030_REG_VAUX3 12 /* not on all chips */ | |
628 | #define TWL4030_REG_VAUX4 13 /* not on all chips */ | |
629 | ||
630 | /* INTERNAL LDOs */ | |
631 | #define TWL4030_REG_VINTANA1 14 | |
632 | #define TWL4030_REG_VINTANA2 15 | |
633 | #define TWL4030_REG_VINTDIG 16 | |
634 | #define TWL4030_REG_VUSB1V5 17 | |
635 | #define TWL4030_REG_VUSB1V8 18 | |
636 | #define TWL4030_REG_VUSB3V1 19 | |
dad759ff | 637 | |
441a4505 RN |
638 | /* TWL6030 SMPS/LDO's */ |
639 | /* EXTERNAL dc-to-dc buck convertor contollable via SR */ | |
640 | #define TWL6030_REG_VDD1 30 | |
641 | #define TWL6030_REG_VDD2 31 | |
642 | #define TWL6030_REG_VDD3 32 | |
643 | ||
644 | /* Non SR compliant dc-to-dc buck convertors */ | |
645 | #define TWL6030_REG_VMEM 33 | |
646 | #define TWL6030_REG_V2V1 34 | |
647 | #define TWL6030_REG_V1V29 35 | |
648 | #define TWL6030_REG_V1V8 36 | |
649 | ||
650 | /* EXTERNAL LDOs */ | |
651 | #define TWL6030_REG_VAUX1_6030 37 | |
652 | #define TWL6030_REG_VAUX2_6030 38 | |
653 | #define TWL6030_REG_VAUX3_6030 39 | |
654 | #define TWL6030_REG_VMMC 40 | |
655 | #define TWL6030_REG_VPP 41 | |
656 | #define TWL6030_REG_VUSIM 42 | |
657 | #define TWL6030_REG_VANA 43 | |
658 | #define TWL6030_REG_VCXIO 44 | |
659 | #define TWL6030_REG_VDAC 45 | |
660 | #define TWL6030_REG_VUSB 46 | |
661 | ||
662 | /* INTERNAL LDOs */ | |
663 | #define TWL6030_REG_VRTC 47 | |
664 | ||
a603a7fa | 665 | #endif /* End of __TWL4030_H */ |