Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * ethtool.h: Defines for Linux ethtool. | |
3 | * | |
4 | * Copyright (C) 1998 David S. Miller (davem@redhat.com) | |
5 | * Copyright 2001 Jeff Garzik <jgarzik@pobox.com> | |
6 | * Portions Copyright 2001 Sun Microsystems (thockin@sun.com) | |
7 | * Portions Copyright 2002 Intel (eli.kupermann@intel.com, | |
8 | * christopher.leech@intel.com, | |
9 | * scott.feldman@intel.com) | |
59089d8d | 10 | * Portions Copyright (C) Sun Microsystems 2008 |
1da177e4 LT |
11 | */ |
12 | ||
13 | #ifndef _LINUX_ETHTOOL_H | |
14 | #define _LINUX_ETHTOOL_H | |
15 | ||
e621e691 | 16 | #include <linux/types.h> |
1da177e4 LT |
17 | |
18 | /* This should work for both 32 and 64 bit userland. */ | |
19 | struct ethtool_cmd { | |
c3ce7e20 DW |
20 | __u32 cmd; |
21 | __u32 supported; /* Features this interface supports */ | |
22 | __u32 advertising; /* Features this interface advertises */ | |
23 | __u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ | |
24 | __u8 duplex; /* Duplex, half or full */ | |
25 | __u8 port; /* Which connector port */ | |
26 | __u8 phy_address; | |
27 | __u8 transceiver; /* Which transceiver to use */ | |
28 | __u8 autoneg; /* Enable or disable autonegotiation */ | |
0c09c1a4 | 29 | __u8 mdio_support; |
c3ce7e20 DW |
30 | __u32 maxtxpkt; /* Tx pkts before generating tx int */ |
31 | __u32 maxrxpkt; /* Rx pkts before generating rx int */ | |
b11f8d8c | 32 | __u16 speed_hi; |
18760f1e CL |
33 | __u8 eth_tp_mdix; |
34 | __u8 reserved2; | |
0c09c1a4 BH |
35 | __u32 lp_advertising; /* Features the link partner advertises */ |
36 | __u32 reserved[2]; | |
1da177e4 LT |
37 | }; |
38 | ||
b11f8d8c BP |
39 | static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, |
40 | __u32 speed) | |
41 | { | |
42 | ||
43 | ep->speed = (__u16)speed; | |
44 | ep->speed_hi = (__u16)(speed >> 16); | |
45 | } | |
46 | ||
47 | static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep) | |
48 | { | |
49 | return (ep->speed_hi << 16) | ep->speed; | |
50 | } | |
51 | ||
141518c9 | 52 | #define ETHTOOL_FWVERS_LEN 32 |
1da177e4 LT |
53 | #define ETHTOOL_BUSINFO_LEN 32 |
54 | /* these strings are set to whatever the driver author decides... */ | |
55 | struct ethtool_drvinfo { | |
c3ce7e20 | 56 | __u32 cmd; |
1da177e4 LT |
57 | char driver[32]; /* driver short name, "tulip", "eepro100" */ |
58 | char version[32]; /* driver version string */ | |
141518c9 | 59 | char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */ |
1da177e4 LT |
60 | char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ |
61 | /* For PCI devices, use pci_name(pci_dev). */ | |
62 | char reserved1[32]; | |
339bf024 JG |
63 | char reserved2[12]; |
64 | __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */ | |
c3ce7e20 DW |
65 | __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ |
66 | __u32 testinfo_len; | |
67 | __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ | |
68 | __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ | |
1da177e4 LT |
69 | }; |
70 | ||
71 | #define SOPASS_MAX 6 | |
72 | /* wake-on-lan settings */ | |
73 | struct ethtool_wolinfo { | |
c3ce7e20 DW |
74 | __u32 cmd; |
75 | __u32 supported; | |
76 | __u32 wolopts; | |
77 | __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ | |
1da177e4 LT |
78 | }; |
79 | ||
80 | /* for passing single values */ | |
81 | struct ethtool_value { | |
c3ce7e20 DW |
82 | __u32 cmd; |
83 | __u32 data; | |
1da177e4 LT |
84 | }; |
85 | ||
86 | /* for passing big chunks of data */ | |
87 | struct ethtool_regs { | |
c3ce7e20 DW |
88 | __u32 cmd; |
89 | __u32 version; /* driver-specific, indicates different chips/revs */ | |
90 | __u32 len; /* bytes */ | |
91 | __u8 data[0]; | |
1da177e4 LT |
92 | }; |
93 | ||
94 | /* for passing EEPROM chunks */ | |
95 | struct ethtool_eeprom { | |
c3ce7e20 DW |
96 | __u32 cmd; |
97 | __u32 magic; | |
98 | __u32 offset; /* in bytes */ | |
99 | __u32 len; /* in bytes */ | |
100 | __u8 data[0]; | |
1da177e4 LT |
101 | }; |
102 | ||
103 | /* for configuring coalescing parameters of chip */ | |
104 | struct ethtool_coalesce { | |
c3ce7e20 | 105 | __u32 cmd; /* ETHTOOL_{G,S}COALESCE */ |
1da177e4 LT |
106 | |
107 | /* How many usecs to delay an RX interrupt after | |
108 | * a packet arrives. If 0, only rx_max_coalesced_frames | |
109 | * is used. | |
110 | */ | |
c3ce7e20 | 111 | __u32 rx_coalesce_usecs; |
1da177e4 LT |
112 | |
113 | /* How many packets to delay an RX interrupt after | |
114 | * a packet arrives. If 0, only rx_coalesce_usecs is | |
115 | * used. It is illegal to set both usecs and max frames | |
116 | * to zero as this would cause RX interrupts to never be | |
117 | * generated. | |
118 | */ | |
c3ce7e20 | 119 | __u32 rx_max_coalesced_frames; |
1da177e4 LT |
120 | |
121 | /* Same as above two parameters, except that these values | |
122 | * apply while an IRQ is being serviced by the host. Not | |
123 | * all cards support this feature and the values are ignored | |
124 | * in that case. | |
125 | */ | |
c3ce7e20 DW |
126 | __u32 rx_coalesce_usecs_irq; |
127 | __u32 rx_max_coalesced_frames_irq; | |
1da177e4 LT |
128 | |
129 | /* How many usecs to delay a TX interrupt after | |
130 | * a packet is sent. If 0, only tx_max_coalesced_frames | |
131 | * is used. | |
132 | */ | |
c3ce7e20 | 133 | __u32 tx_coalesce_usecs; |
1da177e4 LT |
134 | |
135 | /* How many packets to delay a TX interrupt after | |
136 | * a packet is sent. If 0, only tx_coalesce_usecs is | |
137 | * used. It is illegal to set both usecs and max frames | |
138 | * to zero as this would cause TX interrupts to never be | |
139 | * generated. | |
140 | */ | |
c3ce7e20 | 141 | __u32 tx_max_coalesced_frames; |
1da177e4 LT |
142 | |
143 | /* Same as above two parameters, except that these values | |
144 | * apply while an IRQ is being serviced by the host. Not | |
145 | * all cards support this feature and the values are ignored | |
146 | * in that case. | |
147 | */ | |
c3ce7e20 DW |
148 | __u32 tx_coalesce_usecs_irq; |
149 | __u32 tx_max_coalesced_frames_irq; | |
1da177e4 LT |
150 | |
151 | /* How many usecs to delay in-memory statistics | |
152 | * block updates. Some drivers do not have an in-memory | |
153 | * statistic block, and in such cases this value is ignored. | |
154 | * This value must not be zero. | |
155 | */ | |
c3ce7e20 | 156 | __u32 stats_block_coalesce_usecs; |
1da177e4 LT |
157 | |
158 | /* Adaptive RX/TX coalescing is an algorithm implemented by | |
159 | * some drivers to improve latency under low packet rates and | |
160 | * improve throughput under high packet rates. Some drivers | |
161 | * only implement one of RX or TX adaptive coalescing. Anything | |
162 | * not implemented by the driver causes these values to be | |
163 | * silently ignored. | |
164 | */ | |
c3ce7e20 DW |
165 | __u32 use_adaptive_rx_coalesce; |
166 | __u32 use_adaptive_tx_coalesce; | |
1da177e4 LT |
167 | |
168 | /* When the packet rate (measured in packets per second) | |
169 | * is below pkt_rate_low, the {rx,tx}_*_low parameters are | |
170 | * used. | |
171 | */ | |
c3ce7e20 DW |
172 | __u32 pkt_rate_low; |
173 | __u32 rx_coalesce_usecs_low; | |
174 | __u32 rx_max_coalesced_frames_low; | |
175 | __u32 tx_coalesce_usecs_low; | |
176 | __u32 tx_max_coalesced_frames_low; | |
1da177e4 LT |
177 | |
178 | /* When the packet rate is below pkt_rate_high but above | |
179 | * pkt_rate_low (both measured in packets per second) the | |
180 | * normal {rx,tx}_* coalescing parameters are used. | |
181 | */ | |
182 | ||
183 | /* When the packet rate is (measured in packets per second) | |
184 | * is above pkt_rate_high, the {rx,tx}_*_high parameters are | |
185 | * used. | |
186 | */ | |
c3ce7e20 DW |
187 | __u32 pkt_rate_high; |
188 | __u32 rx_coalesce_usecs_high; | |
189 | __u32 rx_max_coalesced_frames_high; | |
190 | __u32 tx_coalesce_usecs_high; | |
191 | __u32 tx_max_coalesced_frames_high; | |
1da177e4 LT |
192 | |
193 | /* How often to do adaptive coalescing packet rate sampling, | |
194 | * measured in seconds. Must not be zero. | |
195 | */ | |
c3ce7e20 | 196 | __u32 rate_sample_interval; |
1da177e4 LT |
197 | }; |
198 | ||
199 | /* for configuring RX/TX ring parameters */ | |
200 | struct ethtool_ringparam { | |
c3ce7e20 | 201 | __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ |
1da177e4 LT |
202 | |
203 | /* Read only attributes. These indicate the maximum number | |
204 | * of pending RX/TX ring entries the driver will allow the | |
205 | * user to set. | |
206 | */ | |
c3ce7e20 DW |
207 | __u32 rx_max_pending; |
208 | __u32 rx_mini_max_pending; | |
209 | __u32 rx_jumbo_max_pending; | |
210 | __u32 tx_max_pending; | |
1da177e4 LT |
211 | |
212 | /* Values changeable by the user. The valid values are | |
213 | * in the range 1 to the "*_max_pending" counterpart above. | |
214 | */ | |
c3ce7e20 DW |
215 | __u32 rx_pending; |
216 | __u32 rx_mini_pending; | |
217 | __u32 rx_jumbo_pending; | |
218 | __u32 tx_pending; | |
1da177e4 LT |
219 | }; |
220 | ||
221 | /* for configuring link flow control parameters */ | |
222 | struct ethtool_pauseparam { | |
c3ce7e20 | 223 | __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ |
1da177e4 LT |
224 | |
225 | /* If the link is being auto-negotiated (via ethtool_cmd.autoneg | |
226 | * being true) the user may set 'autonet' here non-zero to have the | |
227 | * pause parameters be auto-negotiated too. In such a case, the | |
228 | * {rx,tx}_pause values below determine what capabilities are | |
229 | * advertised. | |
230 | * | |
231 | * If 'autoneg' is zero or the link is not being auto-negotiated, | |
232 | * then {rx,tx}_pause force the driver to use/not-use pause | |
233 | * flow control. | |
234 | */ | |
c3ce7e20 DW |
235 | __u32 autoneg; |
236 | __u32 rx_pause; | |
237 | __u32 tx_pause; | |
1da177e4 LT |
238 | }; |
239 | ||
240 | #define ETH_GSTRING_LEN 32 | |
241 | enum ethtool_stringset { | |
242 | ETH_SS_TEST = 0, | |
243 | ETH_SS_STATS, | |
339bf024 | 244 | ETH_SS_PRIV_FLAGS, |
1da177e4 LT |
245 | }; |
246 | ||
247 | /* for passing string sets for data tagging */ | |
248 | struct ethtool_gstrings { | |
c3ce7e20 DW |
249 | __u32 cmd; /* ETHTOOL_GSTRINGS */ |
250 | __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ | |
251 | __u32 len; /* number of strings in the string set */ | |
252 | __u8 data[0]; | |
1da177e4 LT |
253 | }; |
254 | ||
255 | enum ethtool_test_flags { | |
256 | ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */ | |
257 | ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */ | |
258 | }; | |
259 | ||
260 | /* for requesting NIC test and getting results*/ | |
261 | struct ethtool_test { | |
c3ce7e20 DW |
262 | __u32 cmd; /* ETHTOOL_TEST */ |
263 | __u32 flags; /* ETH_TEST_FL_xxx */ | |
264 | __u32 reserved; | |
265 | __u32 len; /* result length, in number of u64 elements */ | |
266 | __u64 data[0]; | |
1da177e4 LT |
267 | }; |
268 | ||
269 | /* for dumping NIC-specific statistics */ | |
270 | struct ethtool_stats { | |
c3ce7e20 DW |
271 | __u32 cmd; /* ETHTOOL_GSTATS */ |
272 | __u32 n_stats; /* number of u64's being returned */ | |
273 | __u64 data[0]; | |
1da177e4 LT |
274 | }; |
275 | ||
a6f9a705 | 276 | struct ethtool_perm_addr { |
c3ce7e20 DW |
277 | __u32 cmd; /* ETHTOOL_GPERMADDR */ |
278 | __u32 size; | |
279 | __u8 data[0]; | |
a6f9a705 JW |
280 | }; |
281 | ||
3ae7c0b2 JG |
282 | /* boolean flags controlling per-interface behavior characteristics. |
283 | * When reading, the flag indicates whether or not a certain behavior | |
284 | * is enabled/present. When writing, the flag indicates whether | |
285 | * or not the driver should turn on (set) or off (clear) a behavior. | |
286 | * | |
287 | * Some behaviors may read-only (unconditionally absent or present). | |
288 | * If such is the case, return EINVAL in the set-flags operation if the | |
289 | * flag differs from the read-only value. | |
290 | */ | |
291 | enum ethtool_flags { | |
292 | ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */ | |
293 | }; | |
294 | ||
59089d8d SB |
295 | /* The following structures are for supporting RX network flow |
296 | * classification configuration. Note, all multibyte fields, e.g., | |
297 | * ip4src, ip4dst, psrc, pdst, spi, etc. are expected to be in network | |
298 | * byte order. | |
299 | */ | |
300 | struct ethtool_tcpip4_spec { | |
301 | __be32 ip4src; | |
302 | __be32 ip4dst; | |
303 | __be16 psrc; | |
304 | __be16 pdst; | |
305 | __u8 tos; | |
306 | }; | |
307 | ||
308 | struct ethtool_ah_espip4_spec { | |
309 | __be32 ip4src; | |
310 | __be32 ip4dst; | |
311 | __be32 spi; | |
312 | __u8 tos; | |
313 | }; | |
314 | ||
315 | struct ethtool_rawip4_spec { | |
316 | __be32 ip4src; | |
317 | __be32 ip4dst; | |
318 | __u8 hdata[64]; | |
319 | }; | |
320 | ||
321 | struct ethtool_ether_spec { | |
322 | __be16 ether_type; | |
323 | __u8 frame_size; | |
324 | __u8 eframe[16]; | |
325 | }; | |
326 | ||
327 | #define ETH_RX_NFC_IP4 1 | |
328 | #define ETH_RX_NFC_IP6 2 | |
329 | ||
330 | struct ethtool_usrip4_spec { | |
331 | __be32 ip4src; | |
332 | __be32 ip4dst; | |
333 | __be32 l4_4_bytes; | |
334 | __u8 tos; | |
335 | __u8 ip_ver; | |
336 | __u8 proto; | |
337 | }; | |
338 | ||
339 | struct ethtool_rx_flow_spec { | |
0853ad66 | 340 | __u32 flow_type; |
59089d8d SB |
341 | union { |
342 | struct ethtool_tcpip4_spec tcp_ip4_spec; | |
343 | struct ethtool_tcpip4_spec udp_ip4_spec; | |
344 | struct ethtool_tcpip4_spec sctp_ip4_spec; | |
345 | struct ethtool_ah_espip4_spec ah_ip4_spec; | |
346 | struct ethtool_ah_espip4_spec esp_ip4_spec; | |
347 | struct ethtool_rawip4_spec raw_ip4_spec; | |
348 | struct ethtool_ether_spec ether_spec; | |
349 | struct ethtool_usrip4_spec usr_ip4_spec; | |
350 | __u8 hdata[64]; | |
351 | } h_u, m_u; /* entry, mask */ | |
352 | __u64 ring_cookie; | |
353 | __u32 location; | |
354 | }; | |
355 | ||
356 | struct ethtool_rxnfc { | |
357 | __u32 cmd; | |
358 | __u32 flow_type; | |
359 | /* The rx flow hash value or the rule DB size */ | |
360 | __u64 data; | |
361 | struct ethtool_rx_flow_spec fs; | |
362 | __u32 rule_cnt; | |
363 | __u32 rule_locs[0]; | |
0853ad66 SB |
364 | }; |
365 | ||
05c6a8d7 AK |
366 | #define ETHTOOL_FLASH_MAX_FILENAME 128 |
367 | enum ethtool_flash_op_type { | |
368 | ETHTOOL_FLASH_ALL_REGIONS = 0, | |
369 | }; | |
370 | ||
371 | /* for passing firmware flashing related parameters */ | |
372 | struct ethtool_flash { | |
373 | __u32 cmd; | |
374 | __u32 region; | |
375 | char data[ETHTOOL_FLASH_MAX_FILENAME]; | |
376 | }; | |
377 | ||
c3ce7e20 DW |
378 | #ifdef __KERNEL__ |
379 | ||
1da177e4 LT |
380 | struct net_device; |
381 | ||
382 | /* Some generic methods drivers may use in their ethtool_ops */ | |
383 | u32 ethtool_op_get_link(struct net_device *dev); | |
8a729fce | 384 | u32 ethtool_op_get_rx_csum(struct net_device *dev); |
1da177e4 LT |
385 | u32 ethtool_op_get_tx_csum(struct net_device *dev); |
386 | int ethtool_op_set_tx_csum(struct net_device *dev, u32 data); | |
69f6a0fa | 387 | int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data); |
6460d948 | 388 | int ethtool_op_set_tx_ipv6_csum(struct net_device *dev, u32 data); |
1da177e4 LT |
389 | u32 ethtool_op_get_sg(struct net_device *dev); |
390 | int ethtool_op_set_sg(struct net_device *dev, u32 data); | |
391 | u32 ethtool_op_get_tso(struct net_device *dev); | |
392 | int ethtool_op_set_tso(struct net_device *dev, u32 data); | |
e89e9cf5 AR |
393 | u32 ethtool_op_get_ufo(struct net_device *dev); |
394 | int ethtool_op_set_ufo(struct net_device *dev, u32 data); | |
3ae7c0b2 JG |
395 | u32 ethtool_op_get_flags(struct net_device *dev); |
396 | int ethtool_op_set_flags(struct net_device *dev, u32 data); | |
1da177e4 LT |
397 | |
398 | /** | |
399 | * ðtool_ops - Alter and report network device settings | |
400 | * get_settings: Get device-specific settings | |
401 | * set_settings: Set device-specific settings | |
402 | * get_drvinfo: Report driver information | |
403 | * get_regs: Get device registers | |
404 | * get_wol: Report whether Wake-on-Lan is enabled | |
405 | * set_wol: Turn Wake-on-Lan on or off | |
406 | * get_msglevel: Report driver message level | |
407 | * set_msglevel: Set driver message level | |
408 | * nway_reset: Restart autonegotiation | |
409 | * get_link: Get link status | |
410 | * get_eeprom: Read data from the device EEPROM | |
411 | * set_eeprom: Write data to the device EEPROM | |
412 | * get_coalesce: Get interrupt coalescing parameters | |
413 | * set_coalesce: Set interrupt coalescing parameters | |
414 | * get_ringparam: Report ring sizes | |
415 | * set_ringparam: Set ring sizes | |
416 | * get_pauseparam: Report pause parameters | |
fd3f8984 | 417 | * set_pauseparam: Set pause parameters |
1da177e4 LT |
418 | * get_rx_csum: Report whether receive checksums are turned on or off |
419 | * set_rx_csum: Turn receive checksum on or off | |
420 | * get_tx_csum: Report whether transmit checksums are turned on or off | |
421 | * set_tx_csum: Turn transmit checksums on or off | |
422 | * get_sg: Report whether scatter-gather is enabled | |
423 | * set_sg: Turn scatter-gather on or off | |
424 | * get_tso: Report whether TCP segmentation offload is enabled | |
425 | * set_tso: Turn TCP segmentation offload on or off | |
e89e9cf5 AR |
426 | * get_ufo: Report whether UDP fragmentation offload is enabled |
427 | * set_ufo: Turn UDP fragmentation offload on or off | |
1da177e4 LT |
428 | * self_test: Run specified self-tests |
429 | * get_strings: Return a set of strings that describe the requested objects | |
430 | * phys_id: Identify the device | |
431 | * get_stats: Return statistics about the device | |
3ae7c0b2 JG |
432 | * get_flags: get 32-bit flags bitmap |
433 | * set_flags: set 32-bit flags bitmap | |
a6f9a705 | 434 | * |
1da177e4 LT |
435 | * Description: |
436 | * | |
437 | * get_settings: | |
438 | * @get_settings is passed an ðtool_cmd to fill in. It returns | |
439 | * an negative errno or zero. | |
440 | * | |
441 | * set_settings: | |
442 | * @set_settings is passed an ðtool_cmd and should attempt to set | |
443 | * all the settings this device supports. It may return an error value | |
444 | * if something goes wrong (otherwise 0). | |
445 | * | |
446 | * get_eeprom: | |
447 | * Should fill in the magic field. Don't need to check len for zero | |
448 | * or wraparound. Fill in the data argument with the eeprom values | |
449 | * from offset to offset + len. Update len to the amount read. | |
450 | * Returns an error or zero. | |
451 | * | |
452 | * set_eeprom: | |
453 | * Should validate the magic field. Don't need to check len for zero | |
454 | * or wraparound. Update len to the amount written. Returns an error | |
455 | * or zero. | |
456 | */ | |
457 | struct ethtool_ops { | |
458 | int (*get_settings)(struct net_device *, struct ethtool_cmd *); | |
459 | int (*set_settings)(struct net_device *, struct ethtool_cmd *); | |
460 | void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *); | |
461 | int (*get_regs_len)(struct net_device *); | |
462 | void (*get_regs)(struct net_device *, struct ethtool_regs *, void *); | |
463 | void (*get_wol)(struct net_device *, struct ethtool_wolinfo *); | |
464 | int (*set_wol)(struct net_device *, struct ethtool_wolinfo *); | |
465 | u32 (*get_msglevel)(struct net_device *); | |
466 | void (*set_msglevel)(struct net_device *, u32); | |
467 | int (*nway_reset)(struct net_device *); | |
468 | u32 (*get_link)(struct net_device *); | |
469 | int (*get_eeprom_len)(struct net_device *); | |
470 | int (*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); | |
471 | int (*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *); | |
472 | int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *); | |
473 | int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *); | |
474 | void (*get_ringparam)(struct net_device *, struct ethtool_ringparam *); | |
475 | int (*set_ringparam)(struct net_device *, struct ethtool_ringparam *); | |
476 | void (*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*); | |
477 | int (*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*); | |
478 | u32 (*get_rx_csum)(struct net_device *); | |
479 | int (*set_rx_csum)(struct net_device *, u32); | |
480 | u32 (*get_tx_csum)(struct net_device *); | |
481 | int (*set_tx_csum)(struct net_device *, u32); | |
482 | u32 (*get_sg)(struct net_device *); | |
483 | int (*set_sg)(struct net_device *, u32); | |
484 | u32 (*get_tso)(struct net_device *); | |
485 | int (*set_tso)(struct net_device *, u32); | |
1da177e4 LT |
486 | void (*self_test)(struct net_device *, struct ethtool_test *, u64 *); |
487 | void (*get_strings)(struct net_device *, u32 stringset, u8 *); | |
488 | int (*phys_id)(struct net_device *, u32); | |
1da177e4 LT |
489 | void (*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *); |
490 | int (*begin)(struct net_device *); | |
491 | void (*complete)(struct net_device *); | |
e89e9cf5 AR |
492 | u32 (*get_ufo)(struct net_device *); |
493 | int (*set_ufo)(struct net_device *, u32); | |
3ae7c0b2 JG |
494 | u32 (*get_flags)(struct net_device *); |
495 | int (*set_flags)(struct net_device *, u32); | |
339bf024 JG |
496 | u32 (*get_priv_flags)(struct net_device *); |
497 | int (*set_priv_flags)(struct net_device *, u32); | |
ff03d49f | 498 | int (*get_sset_count)(struct net_device *, int); |
59089d8d SB |
499 | int (*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *); |
500 | int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *); | |
05c6a8d7 | 501 | int (*flash_device)(struct net_device *, struct ethtool_flash *); |
d73d3a8c | 502 | int (*reset)(struct net_device *, u32 *); |
1da177e4 | 503 | }; |
c3ce7e20 | 504 | #endif /* __KERNEL__ */ |
1da177e4 LT |
505 | |
506 | /* CMDs currently supported */ | |
507 | #define ETHTOOL_GSET 0x00000001 /* Get settings. */ | |
508 | #define ETHTOOL_SSET 0x00000002 /* Set settings. */ | |
509 | #define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ | |
510 | #define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ | |
511 | #define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ | |
512 | #define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */ | |
513 | #define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ | |
514 | #define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */ | |
515 | #define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */ | |
516 | #define ETHTOOL_GLINK 0x0000000a /* Get link status (ethtool_value) */ | |
517 | #define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ | |
518 | #define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */ | |
519 | #define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ | |
520 | #define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ | |
521 | #define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ | |
522 | #define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */ | |
523 | #define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ | |
524 | #define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ | |
525 | #define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ | |
526 | #define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ | |
527 | #define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ | |
528 | #define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ | |
529 | #define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable | |
530 | * (ethtool_value) */ | |
531 | #define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable | |
532 | * (ethtool_value). */ | |
533 | #define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */ | |
534 | #define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ | |
535 | #define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ | |
536 | #define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ | |
537 | #define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ | |
538 | #define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ | |
a6f9a705 | 539 | #define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */ |
e89e9cf5 AR |
540 | #define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ |
541 | #define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ | |
37c3185a HX |
542 | #define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ |
543 | #define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ | |
3ae7c0b2 JG |
544 | #define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */ |
545 | #define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */ | |
339bf024 JG |
546 | #define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */ |
547 | #define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */ | |
1da177e4 | 548 | |
0853ad66 SB |
549 | #define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */ |
550 | #define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */ | |
b240a0e5 HX |
551 | #define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */ |
552 | #define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */ | |
59089d8d SB |
553 | #define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */ |
554 | #define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */ | |
555 | #define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */ | |
556 | #define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */ | |
557 | #define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */ | |
558 | #define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */ | |
05c6a8d7 | 559 | #define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */ |
d73d3a8c | 560 | #define ETHTOOL_RESET 0x00000034 /* Reset hardware */ |
0853ad66 | 561 | |
1da177e4 LT |
562 | /* compatibility with older code */ |
563 | #define SPARC_ETH_GSET ETHTOOL_GSET | |
564 | #define SPARC_ETH_SSET ETHTOOL_SSET | |
565 | ||
566 | /* Indicates what features are supported by the interface. */ | |
567 | #define SUPPORTED_10baseT_Half (1 << 0) | |
568 | #define SUPPORTED_10baseT_Full (1 << 1) | |
569 | #define SUPPORTED_100baseT_Half (1 << 2) | |
570 | #define SUPPORTED_100baseT_Full (1 << 3) | |
571 | #define SUPPORTED_1000baseT_Half (1 << 4) | |
572 | #define SUPPORTED_1000baseT_Full (1 << 5) | |
573 | #define SUPPORTED_Autoneg (1 << 6) | |
574 | #define SUPPORTED_TP (1 << 7) | |
575 | #define SUPPORTED_AUI (1 << 8) | |
576 | #define SUPPORTED_MII (1 << 9) | |
577 | #define SUPPORTED_FIBRE (1 << 10) | |
578 | #define SUPPORTED_BNC (1 << 11) | |
579 | #define SUPPORTED_10000baseT_Full (1 << 12) | |
00db8189 AF |
580 | #define SUPPORTED_Pause (1 << 13) |
581 | #define SUPPORTED_Asym_Pause (1 << 14) | |
427c2196 | 582 | #define SUPPORTED_2500baseX_Full (1 << 15) |
894b19a6 BH |
583 | #define SUPPORTED_Backplane (1 << 16) |
584 | #define SUPPORTED_1000baseKX_Full (1 << 17) | |
585 | #define SUPPORTED_10000baseKX4_Full (1 << 18) | |
586 | #define SUPPORTED_10000baseKR_Full (1 << 19) | |
587 | #define SUPPORTED_10000baseR_FEC (1 << 20) | |
1da177e4 LT |
588 | |
589 | /* Indicates what features are advertised by the interface. */ | |
590 | #define ADVERTISED_10baseT_Half (1 << 0) | |
591 | #define ADVERTISED_10baseT_Full (1 << 1) | |
592 | #define ADVERTISED_100baseT_Half (1 << 2) | |
593 | #define ADVERTISED_100baseT_Full (1 << 3) | |
594 | #define ADVERTISED_1000baseT_Half (1 << 4) | |
595 | #define ADVERTISED_1000baseT_Full (1 << 5) | |
596 | #define ADVERTISED_Autoneg (1 << 6) | |
597 | #define ADVERTISED_TP (1 << 7) | |
598 | #define ADVERTISED_AUI (1 << 8) | |
599 | #define ADVERTISED_MII (1 << 9) | |
600 | #define ADVERTISED_FIBRE (1 << 10) | |
601 | #define ADVERTISED_BNC (1 << 11) | |
602 | #define ADVERTISED_10000baseT_Full (1 << 12) | |
00db8189 AF |
603 | #define ADVERTISED_Pause (1 << 13) |
604 | #define ADVERTISED_Asym_Pause (1 << 14) | |
427c2196 | 605 | #define ADVERTISED_2500baseX_Full (1 << 15) |
894b19a6 BH |
606 | #define ADVERTISED_Backplane (1 << 16) |
607 | #define ADVERTISED_1000baseKX_Full (1 << 17) | |
608 | #define ADVERTISED_10000baseKX4_Full (1 << 18) | |
609 | #define ADVERTISED_10000baseKR_Full (1 << 19) | |
610 | #define ADVERTISED_10000baseR_FEC (1 << 20) | |
1da177e4 LT |
611 | |
612 | /* The following are all involved in forcing a particular link | |
613 | * mode for the device for setting things. When getting the | |
614 | * devices settings, these indicate the current mode and whether | |
615 | * it was foced up into this mode or autonegotiated. | |
616 | */ | |
617 | ||
5b0c76ad | 618 | /* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */ |
1da177e4 LT |
619 | #define SPEED_10 10 |
620 | #define SPEED_100 100 | |
621 | #define SPEED_1000 1000 | |
5b0c76ad | 622 | #define SPEED_2500 2500 |
1da177e4 LT |
623 | #define SPEED_10000 10000 |
624 | ||
625 | /* Duplex, half or full. */ | |
626 | #define DUPLEX_HALF 0x00 | |
627 | #define DUPLEX_FULL 0x01 | |
628 | ||
629 | /* Which connector port. */ | |
630 | #define PORT_TP 0x00 | |
631 | #define PORT_AUI 0x01 | |
632 | #define PORT_MII 0x02 | |
633 | #define PORT_FIBRE 0x03 | |
634 | #define PORT_BNC 0x04 | |
5789d290 PW |
635 | #define PORT_DA 0x05 |
636 | #define PORT_NONE 0xef | |
0821c717 | 637 | #define PORT_OTHER 0xff |
1da177e4 LT |
638 | |
639 | /* Which transceiver to use. */ | |
640 | #define XCVR_INTERNAL 0x00 | |
641 | #define XCVR_EXTERNAL 0x01 | |
642 | #define XCVR_DUMMY1 0x02 | |
643 | #define XCVR_DUMMY2 0x03 | |
644 | #define XCVR_DUMMY3 0x04 | |
645 | ||
646 | /* Enable or disable autonegotiation. If this is set to enable, | |
647 | * the forced link modes above are completely ignored. | |
648 | */ | |
649 | #define AUTONEG_DISABLE 0x00 | |
650 | #define AUTONEG_ENABLE 0x01 | |
651 | ||
18760f1e CL |
652 | /* Mode MDI or MDI-X */ |
653 | #define ETH_TP_MDI_INVALID 0x00 | |
654 | #define ETH_TP_MDI 0x01 | |
655 | #define ETH_TP_MDI_X 0x02 | |
656 | ||
1da177e4 LT |
657 | /* Wake-On-Lan options. */ |
658 | #define WAKE_PHY (1 << 0) | |
659 | #define WAKE_UCAST (1 << 1) | |
660 | #define WAKE_MCAST (1 << 2) | |
661 | #define WAKE_BCAST (1 << 3) | |
662 | #define WAKE_ARP (1 << 4) | |
663 | #define WAKE_MAGIC (1 << 5) | |
664 | #define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ | |
665 | ||
0853ad66 SB |
666 | /* L3-L4 network traffic flow types */ |
667 | #define TCP_V4_FLOW 0x01 | |
668 | #define UDP_V4_FLOW 0x02 | |
669 | #define SCTP_V4_FLOW 0x03 | |
670 | #define AH_ESP_V4_FLOW 0x04 | |
671 | #define TCP_V6_FLOW 0x05 | |
672 | #define UDP_V6_FLOW 0x06 | |
673 | #define SCTP_V6_FLOW 0x07 | |
674 | #define AH_ESP_V6_FLOW 0x08 | |
59089d8d SB |
675 | #define AH_V4_FLOW 0x09 |
676 | #define ESP_V4_FLOW 0x0a | |
677 | #define AH_V6_FLOW 0x0b | |
678 | #define ESP_V6_FLOW 0x0c | |
679 | #define IP_USER_FLOW 0x0d | |
7a8b3372 SG |
680 | #define IPV4_FLOW 0x10 |
681 | #define IPV6_FLOW 0x11 | |
0853ad66 SB |
682 | |
683 | /* L3-L4 network traffic flow hash options */ | |
0853ad66 SB |
684 | #define RXH_L2DA (1 << 1) |
685 | #define RXH_VLAN (1 << 2) | |
686 | #define RXH_L3_PROTO (1 << 3) | |
687 | #define RXH_IP_SRC (1 << 4) | |
688 | #define RXH_IP_DST (1 << 5) | |
689 | #define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */ | |
690 | #define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */ | |
691 | #define RXH_DISCARD (1 << 31) | |
692 | ||
59089d8d | 693 | #define RX_CLS_FLOW_DISC 0xffffffffffffffffULL |
0853ad66 | 694 | |
d73d3a8c BH |
695 | /* Reset flags */ |
696 | /* The reset() operation must clear the flags for the components which | |
697 | * were actually reset. On successful return, the flags indicate the | |
698 | * components which were not reset, either because they do not exist | |
699 | * in the hardware or because they cannot be reset independently. The | |
700 | * driver must never reset any components that were not requested. | |
701 | */ | |
702 | enum ethtool_reset_flags { | |
703 | /* These flags represent components dedicated to the interface | |
704 | * the command is addressed to. Shift any flag left by | |
705 | * ETH_RESET_SHARED_SHIFT to reset a shared component of the | |
706 | * same type. | |
707 | */ | |
708 | ETH_RESET_MGMT = 1 << 0, /* Management processor */ | |
709 | ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */ | |
710 | ETH_RESET_DMA = 1 << 2, /* DMA engine */ | |
711 | ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */ | |
712 | ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */ | |
713 | ETH_RESET_MAC = 1 << 5, /* Media access controller */ | |
714 | ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */ | |
715 | ETH_RESET_RAM = 1 << 7, /* RAM shared between | |
716 | * multiple components */ | |
717 | ||
718 | ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to | |
719 | * this interface */ | |
720 | ETH_RESET_ALL = 0xffffffff, /* All components used by this | |
721 | * interface, even if shared */ | |
722 | }; | |
723 | #define ETH_RESET_SHARED_SHIFT 16 | |
724 | ||
1da177e4 | 725 | #endif /* _LINUX_ETHTOOL_H */ |