projects / linux-2.6-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
pcie: utilize pcie transaction pending bit
[linux-2.6-block.git] / include / linux / ethtool.h
CommitLineData
1da177e4
LT		 1/*
2 * ethtool.h: Defines for Linux ethtool.
3 *
4 * Copyright (C) 1998 David S. Miller (davem@redhat.com)
5 * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
6 * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
7 * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
8 * christopher.leech@intel.com,
9 * scott.feldman@intel.com)
10 */
11
12#ifndef _LINUX_ETHTOOL_H
13#define _LINUX_ETHTOOL_H
14
15
16/* This should work for both 32 and 64 bit userland. */
17struct ethtool_cmd {
c3ce7e20
DW		 18 __u32 cmd;
19 __u32 supported; /* Features this interface supports */
20 __u32 advertising; /* Features this interface advertises */
21 __u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
22 __u8 duplex; /* Duplex, half or full */
23 __u8 port; /* Which connector port */
24 __u8 phy_address;
25 __u8 transceiver; /* Which transceiver to use */
26 __u8 autoneg; /* Enable or disable autonegotiation */
27 __u32 maxtxpkt; /* Tx pkts before generating tx int */
28 __u32 maxrxpkt; /* Rx pkts before generating rx int */
29 __u32 reserved[4];
1da177e4
LT		 30};
31
32#define ETHTOOL_BUSINFO_LEN 32
33/* these strings are set to whatever the driver author decides... */
34struct ethtool_drvinfo {
c3ce7e20 35 __u32 cmd;
1da177e4
LT		 36 char driver[32]; /* driver short name, "tulip", "eepro100" */
37 char version[32]; /* driver version string */
38 char fw_version[32]; /* firmware version string, if applicable */
39 char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
40 /* For PCI devices, use pci_name(pci_dev). */
41 char reserved1[32];
339bf024
JG		 42 char reserved2[12];
43 __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
c3ce7e20
DW		 44 __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
45 __u32 testinfo_len;
46 __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
47 __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
1da177e4
LT		 48};
49
50#define SOPASS_MAX 6
51/* wake-on-lan settings */
52struct ethtool_wolinfo {
c3ce7e20
DW		 53 __u32 cmd;
54 __u32 supported;
55 __u32 wolopts;
56 __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
1da177e4
LT		 57};
58
59/* for passing single values */
60struct ethtool_value {
c3ce7e20
DW		 61 __u32 cmd;
62 __u32 data;
1da177e4
LT		 63};
64
65/* for passing big chunks of data */
66struct ethtool_regs {
c3ce7e20
DW		 67 __u32 cmd;
68 __u32 version; /* driver-specific, indicates different chips/revs */
69 __u32 len; /* bytes */
70 __u8 data[0];
1da177e4
LT		 71};
72
73/* for passing EEPROM chunks */
74struct ethtool_eeprom {
c3ce7e20
DW		 75 __u32 cmd;
76 __u32 magic;
77 __u32 offset; /* in bytes */
78 __u32 len; /* in bytes */
79 __u8 data[0];
1da177e4
LT		 80};
81
82/* for configuring coalescing parameters of chip */
83struct ethtool_coalesce {
c3ce7e20 84 __u32 cmd; /* ETHTOOL_{G,S}COALESCE */
1da177e4
LT		 85
86 /* How many usecs to delay an RX interrupt after
87 * a packet arrives. If 0, only rx_max_coalesced_frames
88 * is used.
89 */
c3ce7e20 90 __u32 rx_coalesce_usecs;
1da177e4
LT		 91
92 /* How many packets to delay an RX interrupt after
93 * a packet arrives. If 0, only rx_coalesce_usecs is
94 * used. It is illegal to set both usecs and max frames
95 * to zero as this would cause RX interrupts to never be
96 * generated.
97 */
c3ce7e20 98 __u32 rx_max_coalesced_frames;
1da177e4
LT		 99
100 /* Same as above two parameters, except that these values
101 * apply while an IRQ is being serviced by the host. Not
102 * all cards support this feature and the values are ignored
103 * in that case.
104 */
c3ce7e20
DW		 105 __u32 rx_coalesce_usecs_irq;
106 __u32 rx_max_coalesced_frames_irq;
1da177e4
LT		 107
108 /* How many usecs to delay a TX interrupt after
109 * a packet is sent. If 0, only tx_max_coalesced_frames
110 * is used.
111 */
c3ce7e20 112 __u32 tx_coalesce_usecs;
1da177e4
LT		 113
114 /* How many packets to delay a TX interrupt after
115 * a packet is sent. If 0, only tx_coalesce_usecs is
116 * used. It is illegal to set both usecs and max frames
117 * to zero as this would cause TX interrupts to never be
118 * generated.
119 */
c3ce7e20 120 __u32 tx_max_coalesced_frames;
1da177e4
LT		 121
122 /* Same as above two parameters, except that these values
123 * apply while an IRQ is being serviced by the host. Not
124 * all cards support this feature and the values are ignored
125 * in that case.
126 */
c3ce7e20
DW		 127 __u32 tx_coalesce_usecs_irq;
128 __u32 tx_max_coalesced_frames_irq;
1da177e4
LT		 129
130 /* How many usecs to delay in-memory statistics
131 * block updates. Some drivers do not have an in-memory
132 * statistic block, and in such cases this value is ignored.
133 * This value must not be zero.
134 */
c3ce7e20 135 __u32 stats_block_coalesce_usecs;
1da177e4
LT		 136
137 /* Adaptive RX/TX coalescing is an algorithm implemented by
138 * some drivers to improve latency under low packet rates and
139 * improve throughput under high packet rates. Some drivers
140 * only implement one of RX or TX adaptive coalescing. Anything
141 * not implemented by the driver causes these values to be
142 * silently ignored.
143 */
c3ce7e20
DW		 144 __u32 use_adaptive_rx_coalesce;
145 __u32 use_adaptive_tx_coalesce;
1da177e4
LT		 146
147 /* When the packet rate (measured in packets per second)
148 * is below pkt_rate_low, the {rx,tx}_*_low parameters are
149 * used.
150 */
c3ce7e20
DW		 151 __u32 pkt_rate_low;
152 __u32 rx_coalesce_usecs_low;
153 __u32 rx_max_coalesced_frames_low;
154 __u32 tx_coalesce_usecs_low;
155 __u32 tx_max_coalesced_frames_low;
1da177e4
LT		 156
157 /* When the packet rate is below pkt_rate_high but above
158 * pkt_rate_low (both measured in packets per second) the
159 * normal {rx,tx}_* coalescing parameters are used.
160 */
161
162 /* When the packet rate is (measured in packets per second)
163 * is above pkt_rate_high, the {rx,tx}_*_high parameters are
164 * used.
165 */
c3ce7e20
DW		 166 __u32 pkt_rate_high;
167 __u32 rx_coalesce_usecs_high;
168 __u32 rx_max_coalesced_frames_high;
169 __u32 tx_coalesce_usecs_high;
170 __u32 tx_max_coalesced_frames_high;
1da177e4
LT		 171
172 /* How often to do adaptive coalescing packet rate sampling,
173 * measured in seconds. Must not be zero.
174 */
c3ce7e20 175 __u32 rate_sample_interval;
1da177e4
LT		 176};
177
178/* for configuring RX/TX ring parameters */
179struct ethtool_ringparam {
c3ce7e20 180 __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
1da177e4
LT		 181
182 /* Read only attributes. These indicate the maximum number
183 * of pending RX/TX ring entries the driver will allow the
184 * user to set.
185 */
c3ce7e20
DW		 186 __u32 rx_max_pending;
187 __u32 rx_mini_max_pending;
188 __u32 rx_jumbo_max_pending;
189 __u32 tx_max_pending;
1da177e4
LT		 190
191 /* Values changeable by the user. The valid values are
192 * in the range 1 to the "*_max_pending" counterpart above.
193 */
c3ce7e20
DW		 194 __u32 rx_pending;
195 __u32 rx_mini_pending;
196 __u32 rx_jumbo_pending;
197 __u32 tx_pending;
1da177e4
LT		 198};
199
200/* for configuring link flow control parameters */
201struct ethtool_pauseparam {
c3ce7e20 202 __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
1da177e4
LT		 203
204 /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
205 * being true) the user may set 'autonet' here non-zero to have the
206 * pause parameters be auto-negotiated too. In such a case, the
207 * {rx,tx}_pause values below determine what capabilities are
208 * advertised.
209 *
210 * If 'autoneg' is zero or the link is not being auto-negotiated,
211 * then {rx,tx}_pause force the driver to use/not-use pause
212 * flow control.
213 */
c3ce7e20
DW		 214 __u32 autoneg;
215 __u32 rx_pause;
216 __u32 tx_pause;
1da177e4
LT		 217};
218
219#define ETH_GSTRING_LEN 32
220enum ethtool_stringset {
221 ETH_SS_TEST = 0,
222 ETH_SS_STATS,
339bf024 223 ETH_SS_PRIV_FLAGS,
1da177e4
LT		 224};
225
226/* for passing string sets for data tagging */
227struct ethtool_gstrings {
c3ce7e20
DW		 228 __u32 cmd; /* ETHTOOL_GSTRINGS */
229 __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
230 __u32 len; /* number of strings in the string set */
231 __u8 data[0];
1da177e4
LT		 232};
233
234enum ethtool_test_flags {
235 ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */
236 ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */
237};
238
239/* for requesting NIC test and getting results*/
240struct ethtool_test {
c3ce7e20
DW		 241 __u32 cmd; /* ETHTOOL_TEST */
242 __u32 flags; /* ETH_TEST_FL_xxx */
243 __u32 reserved;
244 __u32 len; /* result length, in number of u64 elements */
245 __u64 data[0];
1da177e4
LT		 246};
247
248/* for dumping NIC-specific statistics */
249struct ethtool_stats {
c3ce7e20
DW		 250 __u32 cmd; /* ETHTOOL_GSTATS */
251 __u32 n_stats; /* number of u64's being returned */
252 __u64 data[0];
1da177e4
LT		 253};
254
a6f9a705 255struct ethtool_perm_addr {
c3ce7e20
DW		 256 __u32 cmd; /* ETHTOOL_GPERMADDR */
257 __u32 size;
258 __u8 data[0];
a6f9a705
JW		 259};
260
3ae7c0b2
JG		 261/* boolean flags controlling per-interface behavior characteristics.
262 * When reading, the flag indicates whether or not a certain behavior
263 * is enabled/present. When writing, the flag indicates whether
264 * or not the driver should turn on (set) or off (clear) a behavior.
265 *
266 * Some behaviors may read-only (unconditionally absent or present).
267 * If such is the case, return EINVAL in the set-flags operation if the
268 * flag differs from the read-only value.
269 */
270enum ethtool_flags {
271 ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
272};
273
c3ce7e20
DW		 274#ifdef __KERNEL__
275
1da177e4
LT		 276struct net_device;
277
278/* Some generic methods drivers may use in their ethtool_ops */
279u32 ethtool_op_get_link(struct net_device *dev);
280u32 ethtool_op_get_tx_csum(struct net_device *dev);
281int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
69f6a0fa 282int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data);
6460d948 283int ethtool_op_set_tx_ipv6_csum(struct net_device *dev, u32 data);
1da177e4
LT		 284u32 ethtool_op_get_sg(struct net_device *dev);
285int ethtool_op_set_sg(struct net_device *dev, u32 data);
286u32 ethtool_op_get_tso(struct net_device *dev);
287int ethtool_op_set_tso(struct net_device *dev, u32 data);
e89e9cf5
AR		 288u32 ethtool_op_get_ufo(struct net_device *dev);
289int ethtool_op_set_ufo(struct net_device *dev, u32 data);
3ae7c0b2
JG		 290u32 ethtool_op_get_flags(struct net_device *dev);
291int ethtool_op_set_flags(struct net_device *dev, u32 data);
1da177e4
LT		 292
293/**
294 * &ethtool_ops - Alter and report network device settings
295 * get_settings: Get device-specific settings
296 * set_settings: Set device-specific settings
297 * get_drvinfo: Report driver information
298 * get_regs: Get device registers
299 * get_wol: Report whether Wake-on-Lan is enabled
300 * set_wol: Turn Wake-on-Lan on or off
301 * get_msglevel: Report driver message level
302 * set_msglevel: Set driver message level
303 * nway_reset: Restart autonegotiation
304 * get_link: Get link status
305 * get_eeprom: Read data from the device EEPROM
306 * set_eeprom: Write data to the device EEPROM
307 * get_coalesce: Get interrupt coalescing parameters
308 * set_coalesce: Set interrupt coalescing parameters
309 * get_ringparam: Report ring sizes
310 * set_ringparam: Set ring sizes
311 * get_pauseparam: Report pause parameters
312 * set_pauseparam: Set pause paramters
313 * get_rx_csum: Report whether receive checksums are turned on or off
314 * set_rx_csum: Turn receive checksum on or off
315 * get_tx_csum: Report whether transmit checksums are turned on or off
316 * set_tx_csum: Turn transmit checksums on or off
317 * get_sg: Report whether scatter-gather is enabled
318 * set_sg: Turn scatter-gather on or off
319 * get_tso: Report whether TCP segmentation offload is enabled
320 * set_tso: Turn TCP segmentation offload on or off
e89e9cf5
AR		 321 * get_ufo: Report whether UDP fragmentation offload is enabled
322 * set_ufo: Turn UDP fragmentation offload on or off
1da177e4
LT		 323 * self_test: Run specified self-tests
324 * get_strings: Return a set of strings that describe the requested objects
325 * phys_id: Identify the device
326 * get_stats: Return statistics about the device
3ae7c0b2
JG		 327 * get_flags: get 32-bit flags bitmap
328 * set_flags: set 32-bit flags bitmap
a6f9a705 329 *
1da177e4
LT		 330 * Description:
331 *
332 * get_settings:
333 * @get_settings is passed an &ethtool_cmd to fill in. It returns
334 * an negative errno or zero.
335 *
336 * set_settings:
337 * @set_settings is passed an &ethtool_cmd and should attempt to set
338 * all the settings this device supports. It may return an error value
339 * if something goes wrong (otherwise 0).
340 *
341 * get_eeprom:
342 * Should fill in the magic field. Don't need to check len for zero
343 * or wraparound. Fill in the data argument with the eeprom values
344 * from offset to offset + len. Update len to the amount read.
345 * Returns an error or zero.
346 *
347 * set_eeprom:
348 * Should validate the magic field. Don't need to check len for zero
349 * or wraparound. Update len to the amount written. Returns an error
350 * or zero.
351 */
352struct ethtool_ops {
353 int (*get_settings)(struct net_device *, struct ethtool_cmd *);
354 int (*set_settings)(struct net_device *, struct ethtool_cmd *);
355 void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
356 int (*get_regs_len)(struct net_device *);
357 void (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
358 void (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
359 int (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
360 u32 (*get_msglevel)(struct net_device *);
361 void (*set_msglevel)(struct net_device *, u32);
362 int (*nway_reset)(struct net_device *);
363 u32 (*get_link)(struct net_device *);
364 int (*get_eeprom_len)(struct net_device *);
365 int (*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
366 int (*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
367 int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
368 int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
369 void (*get_ringparam)(struct net_device *, struct ethtool_ringparam *);
370 int (*set_ringparam)(struct net_device *, struct ethtool_ringparam *);
371 void (*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
372 int (*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
373 u32 (*get_rx_csum)(struct net_device *);
374 int (*set_rx_csum)(struct net_device *, u32);
375 u32 (*get_tx_csum)(struct net_device *);
376 int (*set_tx_csum)(struct net_device *, u32);
377 u32 (*get_sg)(struct net_device *);
378 int (*set_sg)(struct net_device *, u32);
379 u32 (*get_tso)(struct net_device *);
380 int (*set_tso)(struct net_device *, u32);
1da177e4
LT		 381 void (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
382 void (*get_strings)(struct net_device *, u32 stringset, u8 *);
383 int (*phys_id)(struct net_device *, u32);
1da177e4
LT		 384 void (*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *);
385 int (*begin)(struct net_device *);
386 void (*complete)(struct net_device *);
e89e9cf5
AR		 387 u32 (*get_ufo)(struct net_device *);
388 int (*set_ufo)(struct net_device *, u32);
3ae7c0b2
JG		 389 u32 (*get_flags)(struct net_device *);
390 int (*set_flags)(struct net_device *, u32);
339bf024
JG		 391 u32 (*get_priv_flags)(struct net_device *);
392 int (*set_priv_flags)(struct net_device *, u32);
ff03d49f
JG		 393 int (*get_sset_count)(struct net_device *, int);
394
395 /* the following hooks are obsolete */
396 int (*self_test_count)(struct net_device *);/* use get_sset_count */
397 int (*get_stats_count)(struct net_device *);/* use get_sset_count */
1da177e4 398};
c3ce7e20 399#endif /* __KERNEL__ */
1da177e4
LT		 400
401/* CMDs currently supported */
402#define ETHTOOL_GSET 0x00000001 /* Get settings. */
403#define ETHTOOL_SSET 0x00000002 /* Set settings. */
404#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
405#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
406#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
407#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
408#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
409#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
410#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
411#define ETHTOOL_GLINK 0x0000000a /* Get link status (ethtool_value) */
412#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
413#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
414#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
415#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
416#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
417#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
418#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
419#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
420#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
421#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
422#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
423#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
424#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
425 * (ethtool_value) */
426#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
427 * (ethtool_value). */
428#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
429#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
430#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
431#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
432#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
433#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
a6f9a705 434#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
e89e9cf5
AR		 435#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
436#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
37c3185a
HX		 437#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
438#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
3ae7c0b2
JG		 439#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
440#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
339bf024
JG		 441#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
442#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
1da177e4
LT		 443
444/* compatibility with older code */
445#define SPARC_ETH_GSET ETHTOOL_GSET
446#define SPARC_ETH_SSET ETHTOOL_SSET
447
448/* Indicates what features are supported by the interface. */
449#define SUPPORTED_10baseT_Half (1 << 0)
450#define SUPPORTED_10baseT_Full (1 << 1)
451#define SUPPORTED_100baseT_Half (1 << 2)
452#define SUPPORTED_100baseT_Full (1 << 3)
453#define SUPPORTED_1000baseT_Half (1 << 4)
454#define SUPPORTED_1000baseT_Full (1 << 5)
455#define SUPPORTED_Autoneg (1 << 6)
456#define SUPPORTED_TP (1 << 7)
457#define SUPPORTED_AUI (1 << 8)
458#define SUPPORTED_MII (1 << 9)
459#define SUPPORTED_FIBRE (1 << 10)
460#define SUPPORTED_BNC (1 << 11)
461#define SUPPORTED_10000baseT_Full (1 << 12)
00db8189
AF		 462#define SUPPORTED_Pause (1 << 13)
463#define SUPPORTED_Asym_Pause (1 << 14)
427c2196 464#define SUPPORTED_2500baseX_Full (1 << 15)
1da177e4
LT		 465
466/* Indicates what features are advertised by the interface. */
467#define ADVERTISED_10baseT_Half (1 << 0)
468#define ADVERTISED_10baseT_Full (1 << 1)
469#define ADVERTISED_100baseT_Half (1 << 2)
470#define ADVERTISED_100baseT_Full (1 << 3)
471#define ADVERTISED_1000baseT_Half (1 << 4)
472#define ADVERTISED_1000baseT_Full (1 << 5)
473#define ADVERTISED_Autoneg (1 << 6)
474#define ADVERTISED_TP (1 << 7)
475#define ADVERTISED_AUI (1 << 8)
476#define ADVERTISED_MII (1 << 9)
477#define ADVERTISED_FIBRE (1 << 10)
478#define ADVERTISED_BNC (1 << 11)
479#define ADVERTISED_10000baseT_Full (1 << 12)
00db8189
AF		 480#define ADVERTISED_Pause (1 << 13)
481#define ADVERTISED_Asym_Pause (1 << 14)
427c2196 482#define ADVERTISED_2500baseX_Full (1 << 15)
1da177e4
LT		 483
484/* The following are all involved in forcing a particular link
485 * mode for the device for setting things. When getting the
486 * devices settings, these indicate the current mode and whether
487 * it was foced up into this mode or autonegotiated.
488 */
489
5b0c76ad 490/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
1da177e4
LT		 491#define SPEED_10 10
492#define SPEED_100 100
493#define SPEED_1000 1000
5b0c76ad 494#define SPEED_2500 2500
1da177e4
LT		 495#define SPEED_10000 10000
496
497/* Duplex, half or full. */
498#define DUPLEX_HALF 0x00
499#define DUPLEX_FULL 0x01
500
501/* Which connector port. */
502#define PORT_TP 0x00
503#define PORT_AUI 0x01
504#define PORT_MII 0x02
505#define PORT_FIBRE 0x03
506#define PORT_BNC 0x04
507
508/* Which transceiver to use. */
509#define XCVR_INTERNAL 0x00
510#define XCVR_EXTERNAL 0x01
511#define XCVR_DUMMY1 0x02
512#define XCVR_DUMMY2 0x03
513#define XCVR_DUMMY3 0x04
514
515/* Enable or disable autonegotiation. If this is set to enable,
516 * the forced link modes above are completely ignored.
517 */
518#define AUTONEG_DISABLE 0x00
519#define AUTONEG_ENABLE 0x01
520
521/* Wake-On-Lan options. */
522#define WAKE_PHY (1 << 0)
523#define WAKE_UCAST (1 << 1)
524#define WAKE_MCAST (1 << 2)
525#define WAKE_BCAST (1 << 3)
526#define WAKE_ARP (1 << 4)
527#define WAKE_MAGIC (1 << 5)
528#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
529
530#endif /* _LINUX_ETHTOOL_H */
Linux 6.x block layer and io_uring tree(s)