Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
f8ce2547 | 2 | * linux/include/linux/clk.h |
1da177e4 LT |
3 | * |
4 | * Copyright (C) 2004 ARM Limited. | |
5 | * Written by Deep Blue Solutions Limited. | |
b2476490 | 6 | * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> |
1da177e4 LT |
7 | * |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License version 2 as | |
10 | * published by the Free Software Foundation. | |
11 | */ | |
686f8c5d TP |
12 | #ifndef __LINUX_CLK_H |
13 | #define __LINUX_CLK_H | |
1da177e4 | 14 | |
9f1612d3 | 15 | #include <linux/err.h> |
40d3e0f4 | 16 | #include <linux/kernel.h> |
b2476490 | 17 | #include <linux/notifier.h> |
40d3e0f4 | 18 | |
1da177e4 | 19 | struct device; |
b2476490 | 20 | struct clk; |
71a2f115 KM |
21 | struct device_node; |
22 | struct of_phandle_args; | |
b2476490 | 23 | |
b2476490 MT |
24 | /** |
25 | * DOC: clk notifier callback types | |
26 | * | |
27 | * PRE_RATE_CHANGE - called immediately before the clk rate is changed, | |
28 | * to indicate that the rate change will proceed. Drivers must | |
29 | * immediately terminate any operations that will be affected by the | |
fb72a059 SB |
30 | * rate change. Callbacks may either return NOTIFY_DONE, NOTIFY_OK, |
31 | * NOTIFY_STOP or NOTIFY_BAD. | |
b2476490 MT |
32 | * |
33 | * ABORT_RATE_CHANGE: called if the rate change failed for some reason | |
34 | * after PRE_RATE_CHANGE. In this case, all registered notifiers on | |
35 | * the clk will be called with ABORT_RATE_CHANGE. Callbacks must | |
fb72a059 | 36 | * always return NOTIFY_DONE or NOTIFY_OK. |
b2476490 MT |
37 | * |
38 | * POST_RATE_CHANGE - called after the clk rate change has successfully | |
fb72a059 | 39 | * completed. Callbacks must always return NOTIFY_DONE or NOTIFY_OK. |
b2476490 | 40 | * |
1da177e4 | 41 | */ |
b2476490 MT |
42 | #define PRE_RATE_CHANGE BIT(0) |
43 | #define POST_RATE_CHANGE BIT(1) | |
44 | #define ABORT_RATE_CHANGE BIT(2) | |
1da177e4 | 45 | |
b2476490 MT |
46 | /** |
47 | * struct clk_notifier - associate a clk with a notifier | |
48 | * @clk: struct clk * to associate the notifier with | |
49 | * @notifier_head: a blocking_notifier_head for this clk | |
50 | * @node: linked list pointers | |
51 | * | |
52 | * A list of struct clk_notifier is maintained by the notifier code. | |
53 | * An entry is created whenever code registers the first notifier on a | |
54 | * particular @clk. Future notifiers on that @clk are added to the | |
55 | * @notifier_head. | |
56 | */ | |
57 | struct clk_notifier { | |
58 | struct clk *clk; | |
59 | struct srcu_notifier_head notifier_head; | |
60 | struct list_head node; | |
61 | }; | |
1da177e4 | 62 | |
b2476490 MT |
63 | /** |
64 | * struct clk_notifier_data - rate data to pass to the notifier callback | |
65 | * @clk: struct clk * being changed | |
66 | * @old_rate: previous rate of this clk | |
67 | * @new_rate: new rate of this clk | |
68 | * | |
69 | * For a pre-notifier, old_rate is the clk's rate before this rate | |
70 | * change, and new_rate is what the rate will be in the future. For a | |
71 | * post-notifier, old_rate and new_rate are both set to the clk's | |
72 | * current rate (this was done to optimize the implementation). | |
1da177e4 | 73 | */ |
b2476490 MT |
74 | struct clk_notifier_data { |
75 | struct clk *clk; | |
76 | unsigned long old_rate; | |
77 | unsigned long new_rate; | |
78 | }; | |
79 | ||
266e4e9d DA |
80 | /** |
81 | * struct clk_bulk_data - Data used for bulk clk operations. | |
82 | * | |
83 | * @id: clock consumer ID | |
84 | * @clk: struct clk * to store the associated clock | |
85 | * | |
86 | * The CLK APIs provide a series of clk_bulk_() API calls as | |
87 | * a convenience to consumers which require multiple clks. This | |
88 | * structure is used to manage data for these calls. | |
89 | */ | |
90 | struct clk_bulk_data { | |
91 | const char *id; | |
92 | struct clk *clk; | |
93 | }; | |
94 | ||
e81b87d2 KK |
95 | #ifdef CONFIG_COMMON_CLK |
96 | ||
86bcfa2e MT |
97 | /** |
98 | * clk_notifier_register: register a clock rate-change notifier callback | |
99 | * @clk: clock whose rate we are interested in | |
100 | * @nb: notifier block with callback function pointer | |
101 | * | |
102 | * ProTip: debugging across notifier chains can be frustrating. Make sure that | |
103 | * your notifier callback function prints a nice big warning in case of | |
104 | * failure. | |
105 | */ | |
b2476490 MT |
106 | int clk_notifier_register(struct clk *clk, struct notifier_block *nb); |
107 | ||
86bcfa2e MT |
108 | /** |
109 | * clk_notifier_unregister: unregister a clock rate-change notifier callback | |
110 | * @clk: clock whose rate we are no longer interested in | |
111 | * @nb: notifier block which will be unregistered | |
112 | */ | |
b2476490 MT |
113 | int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); |
114 | ||
5279fc40 BB |
115 | /** |
116 | * clk_get_accuracy - obtain the clock accuracy in ppb (parts per billion) | |
117 | * for a clock source. | |
118 | * @clk: clock source | |
119 | * | |
120 | * This gets the clock source accuracy expressed in ppb. | |
121 | * A perfect clock returns 0. | |
122 | */ | |
123 | long clk_get_accuracy(struct clk *clk); | |
124 | ||
e59c5371 MT |
125 | /** |
126 | * clk_set_phase - adjust the phase shift of a clock signal | |
127 | * @clk: clock signal source | |
128 | * @degrees: number of degrees the signal is shifted | |
129 | * | |
130 | * Shifts the phase of a clock signal by the specified degrees. Returns 0 on | |
131 | * success, -EERROR otherwise. | |
132 | */ | |
133 | int clk_set_phase(struct clk *clk, int degrees); | |
134 | ||
135 | /** | |
136 | * clk_get_phase - return the phase shift of a clock signal | |
137 | * @clk: clock signal source | |
138 | * | |
139 | * Returns the phase shift of a clock node in degrees, otherwise returns | |
140 | * -EERROR. | |
141 | */ | |
142 | int clk_get_phase(struct clk *clk); | |
143 | ||
9fba738a JB |
144 | /** |
145 | * clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal | |
146 | * @clk: clock signal source | |
147 | * @num: numerator of the duty cycle ratio to be applied | |
148 | * @den: denominator of the duty cycle ratio to be applied | |
149 | * | |
150 | * Adjust the duty cycle of a clock signal by the specified ratio. Returns 0 on | |
151 | * success, -EERROR otherwise. | |
152 | */ | |
153 | int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den); | |
154 | ||
155 | /** | |
156 | * clk_get_duty_cycle - return the duty cycle ratio of a clock signal | |
157 | * @clk: clock signal source | |
158 | * @scale: scaling factor to be applied to represent the ratio as an integer | |
159 | * | |
160 | * Returns the duty cycle ratio multiplied by the scale provided, otherwise | |
161 | * returns -EERROR. | |
162 | */ | |
163 | int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale); | |
164 | ||
3d3801ef MT |
165 | /** |
166 | * clk_is_match - check if two clk's point to the same hardware clock | |
167 | * @p: clk compared against q | |
168 | * @q: clk compared against p | |
169 | * | |
170 | * Returns true if the two struct clk pointers both point to the same hardware | |
0e056eb5 | 171 | * clock node. Put differently, returns true if @p and @q |
172 | * share the same &struct clk_core object. | |
3d3801ef MT |
173 | * |
174 | * Returns false otherwise. Note that two NULL clks are treated as matching. | |
175 | */ | |
176 | bool clk_is_match(const struct clk *p, const struct clk *q); | |
177 | ||
5279fc40 BB |
178 | #else |
179 | ||
e81b87d2 KK |
180 | static inline int clk_notifier_register(struct clk *clk, |
181 | struct notifier_block *nb) | |
182 | { | |
183 | return -ENOTSUPP; | |
184 | } | |
185 | ||
186 | static inline int clk_notifier_unregister(struct clk *clk, | |
187 | struct notifier_block *nb) | |
188 | { | |
189 | return -ENOTSUPP; | |
190 | } | |
191 | ||
5279fc40 BB |
192 | static inline long clk_get_accuracy(struct clk *clk) |
193 | { | |
194 | return -ENOTSUPP; | |
195 | } | |
196 | ||
e59c5371 MT |
197 | static inline long clk_set_phase(struct clk *clk, int phase) |
198 | { | |
199 | return -ENOTSUPP; | |
200 | } | |
201 | ||
202 | static inline long clk_get_phase(struct clk *clk) | |
203 | { | |
204 | return -ENOTSUPP; | |
205 | } | |
206 | ||
9fba738a JB |
207 | static inline int clk_set_duty_cycle(struct clk *clk, unsigned int num, |
208 | unsigned int den) | |
209 | { | |
210 | return -ENOTSUPP; | |
211 | } | |
212 | ||
213 | static inline unsigned int clk_get_scaled_duty_cycle(struct clk *clk, | |
214 | unsigned int scale) | |
215 | { | |
216 | return 0; | |
217 | } | |
218 | ||
3d3801ef MT |
219 | static inline bool clk_is_match(const struct clk *p, const struct clk *q) |
220 | { | |
221 | return p == q; | |
222 | } | |
223 | ||
7e87aed9 | 224 | #endif |
1da177e4 | 225 | |
93abe8e4 VK |
226 | /** |
227 | * clk_prepare - prepare a clock source | |
228 | * @clk: clock source | |
229 | * | |
230 | * This prepares the clock source for use. | |
231 | * | |
232 | * Must not be called from within atomic context. | |
233 | */ | |
234 | #ifdef CONFIG_HAVE_CLK_PREPARE | |
235 | int clk_prepare(struct clk *clk); | |
266e4e9d DA |
236 | int __must_check clk_bulk_prepare(int num_clks, |
237 | const struct clk_bulk_data *clks); | |
93abe8e4 VK |
238 | #else |
239 | static inline int clk_prepare(struct clk *clk) | |
240 | { | |
241 | might_sleep(); | |
242 | return 0; | |
243 | } | |
266e4e9d | 244 | |
6e0d4ff4 | 245 | static inline int __must_check clk_bulk_prepare(int num_clks, struct clk_bulk_data *clks) |
266e4e9d DA |
246 | { |
247 | might_sleep(); | |
248 | return 0; | |
249 | } | |
93abe8e4 VK |
250 | #endif |
251 | ||
252 | /** | |
253 | * clk_unprepare - undo preparation of a clock source | |
254 | * @clk: clock source | |
255 | * | |
256 | * This undoes a previously prepared clock. The caller must balance | |
257 | * the number of prepare and unprepare calls. | |
258 | * | |
259 | * Must not be called from within atomic context. | |
260 | */ | |
261 | #ifdef CONFIG_HAVE_CLK_PREPARE | |
262 | void clk_unprepare(struct clk *clk); | |
266e4e9d | 263 | void clk_bulk_unprepare(int num_clks, const struct clk_bulk_data *clks); |
93abe8e4 VK |
264 | #else |
265 | static inline void clk_unprepare(struct clk *clk) | |
266 | { | |
267 | might_sleep(); | |
268 | } | |
266e4e9d DA |
269 | static inline void clk_bulk_unprepare(int num_clks, struct clk_bulk_data *clks) |
270 | { | |
271 | might_sleep(); | |
272 | } | |
93abe8e4 VK |
273 | #endif |
274 | ||
275 | #ifdef CONFIG_HAVE_CLK | |
1da177e4 LT |
276 | /** |
277 | * clk_get - lookup and obtain a reference to a clock producer. | |
278 | * @dev: device for clock "consumer" | |
a58b3a4a | 279 | * @id: clock consumer ID |
1da177e4 LT |
280 | * |
281 | * Returns a struct clk corresponding to the clock producer, or | |
ea3f4eac RK |
282 | * valid IS_ERR() condition containing errno. The implementation |
283 | * uses @dev and @id to determine the clock consumer, and thereby | |
284 | * the clock producer. (IOW, @id may be identical strings, but | |
285 | * clk_get may return different clock producers depending on @dev.) | |
f47fc0ac RK |
286 | * |
287 | * Drivers must assume that the clock source is not enabled. | |
f7ad160b AR |
288 | * |
289 | * clk_get should not be called from within interrupt context. | |
1da177e4 LT |
290 | */ |
291 | struct clk *clk_get(struct device *dev, const char *id); | |
292 | ||
266e4e9d DA |
293 | /** |
294 | * clk_bulk_get - lookup and obtain a number of references to clock producer. | |
295 | * @dev: device for clock "consumer" | |
296 | * @num_clks: the number of clk_bulk_data | |
297 | * @clks: the clk_bulk_data table of consumer | |
298 | * | |
299 | * This helper function allows drivers to get several clk consumers in one | |
300 | * operation. If any of the clk cannot be acquired then any clks | |
301 | * that were obtained will be freed before returning to the caller. | |
302 | * | |
303 | * Returns 0 if all clocks specified in clk_bulk_data table are obtained | |
304 | * successfully, or valid IS_ERR() condition containing errno. | |
305 | * The implementation uses @dev and @clk_bulk_data.id to determine the | |
306 | * clock consumer, and thereby the clock producer. | |
307 | * The clock returned is stored in each @clk_bulk_data.clk field. | |
308 | * | |
309 | * Drivers must assume that the clock source is not enabled. | |
310 | * | |
311 | * clk_bulk_get should not be called from within interrupt context. | |
312 | */ | |
313 | int __must_check clk_bulk_get(struct device *dev, int num_clks, | |
314 | struct clk_bulk_data *clks); | |
616e45df DA |
315 | /** |
316 | * clk_bulk_get_all - lookup and obtain all available references to clock | |
317 | * producer. | |
318 | * @dev: device for clock "consumer" | |
319 | * @clks: pointer to the clk_bulk_data table of consumer | |
320 | * | |
321 | * This helper function allows drivers to get all clk consumers in one | |
322 | * operation. If any of the clk cannot be acquired then any clks | |
323 | * that were obtained will be freed before returning to the caller. | |
324 | * | |
325 | * Returns a positive value for the number of clocks obtained while the | |
326 | * clock references are stored in the clk_bulk_data table in @clks field. | |
327 | * Returns 0 if there're none and a negative value if something failed. | |
328 | * | |
329 | * Drivers must assume that the clock source is not enabled. | |
330 | * | |
331 | * clk_bulk_get should not be called from within interrupt context. | |
332 | */ | |
333 | int __must_check clk_bulk_get_all(struct device *dev, | |
334 | struct clk_bulk_data **clks); | |
618aee02 DA |
335 | /** |
336 | * devm_clk_bulk_get - managed get multiple clk consumers | |
337 | * @dev: device for clock "consumer" | |
338 | * @num_clks: the number of clk_bulk_data | |
339 | * @clks: the clk_bulk_data table of consumer | |
340 | * | |
341 | * Return 0 on success, an errno on failure. | |
342 | * | |
343 | * This helper function allows drivers to get several clk | |
344 | * consumers in one operation with management, the clks will | |
345 | * automatically be freed when the device is unbound. | |
346 | */ | |
347 | int __must_check devm_clk_bulk_get(struct device *dev, int num_clks, | |
348 | struct clk_bulk_data *clks); | |
f08c2e28 DA |
349 | /** |
350 | * devm_clk_bulk_get_all - managed get multiple clk consumers | |
351 | * @dev: device for clock "consumer" | |
352 | * @clks: pointer to the clk_bulk_data table of consumer | |
353 | * | |
354 | * Returns a positive value for the number of clocks obtained while the | |
355 | * clock references are stored in the clk_bulk_data table in @clks field. | |
356 | * Returns 0 if there're none and a negative value if something failed. | |
357 | * | |
358 | * This helper function allows drivers to get several clk | |
359 | * consumers in one operation with management, the clks will | |
360 | * automatically be freed when the device is unbound. | |
361 | */ | |
362 | ||
363 | int __must_check devm_clk_bulk_get_all(struct device *dev, | |
364 | struct clk_bulk_data **clks); | |
618aee02 | 365 | |
a8a97db9 MB |
366 | /** |
367 | * devm_clk_get - lookup and obtain a managed reference to a clock producer. | |
368 | * @dev: device for clock "consumer" | |
a58b3a4a | 369 | * @id: clock consumer ID |
a8a97db9 MB |
370 | * |
371 | * Returns a struct clk corresponding to the clock producer, or | |
372 | * valid IS_ERR() condition containing errno. The implementation | |
373 | * uses @dev and @id to determine the clock consumer, and thereby | |
374 | * the clock producer. (IOW, @id may be identical strings, but | |
375 | * clk_get may return different clock producers depending on @dev.) | |
376 | * | |
377 | * Drivers must assume that the clock source is not enabled. | |
378 | * | |
379 | * devm_clk_get should not be called from within interrupt context. | |
380 | * | |
381 | * The clock will automatically be freed when the device is unbound | |
382 | * from the bus. | |
383 | */ | |
384 | struct clk *devm_clk_get(struct device *dev, const char *id); | |
385 | ||
60b8f0dd PE |
386 | /** |
387 | * devm_clk_get_optional - lookup and obtain a managed reference to an optional | |
388 | * clock producer. | |
389 | * @dev: device for clock "consumer" | |
390 | * @id: clock consumer ID | |
391 | * | |
392 | * Behaves the same as devm_clk_get() except where there is no clock producer. | |
393 | * In this case, instead of returning -ENOENT, the function returns NULL. | |
394 | */ | |
395 | struct clk *devm_clk_get_optional(struct device *dev, const char *id); | |
396 | ||
71a2f115 KM |
397 | /** |
398 | * devm_get_clk_from_child - lookup and obtain a managed reference to a | |
399 | * clock producer from child node. | |
400 | * @dev: device for clock "consumer" | |
401 | * @np: pointer to clock consumer node | |
402 | * @con_id: clock consumer ID | |
403 | * | |
404 | * This function parses the clocks, and uses them to look up the | |
405 | * struct clk from the registered list of clock providers by using | |
406 | * @np and @con_id | |
407 | * | |
408 | * The clock will automatically be freed when the device is unbound | |
409 | * from the bus. | |
410 | */ | |
411 | struct clk *devm_get_clk_from_child(struct device *dev, | |
412 | struct device_node *np, const char *con_id); | |
55e9b8b7 JB |
413 | /** |
414 | * clk_rate_exclusive_get - get exclusivity over the rate control of a | |
415 | * producer | |
416 | * @clk: clock source | |
417 | * | |
418 | * This function allows drivers to get exclusive control over the rate of a | |
419 | * provider. It prevents any other consumer to execute, even indirectly, | |
420 | * opereation which could alter the rate of the provider or cause glitches | |
421 | * | |
422 | * If exlusivity is claimed more than once on clock, even by the same driver, | |
423 | * the rate effectively gets locked as exclusivity can't be preempted. | |
424 | * | |
425 | * Must not be called from within atomic context. | |
426 | * | |
427 | * Returns success (0) or negative errno. | |
428 | */ | |
429 | int clk_rate_exclusive_get(struct clk *clk); | |
430 | ||
431 | /** | |
432 | * clk_rate_exclusive_put - release exclusivity over the rate control of a | |
433 | * producer | |
434 | * @clk: clock source | |
435 | * | |
436 | * This function allows drivers to release the exclusivity it previously got | |
437 | * from clk_rate_exclusive_get() | |
438 | * | |
439 | * The caller must balance the number of clk_rate_exclusive_get() and | |
440 | * clk_rate_exclusive_put() calls. | |
441 | * | |
442 | * Must not be called from within atomic context. | |
443 | */ | |
444 | void clk_rate_exclusive_put(struct clk *clk); | |
71a2f115 | 445 | |
1da177e4 LT |
446 | /** |
447 | * clk_enable - inform the system when the clock source should be running. | |
448 | * @clk: clock source | |
449 | * | |
450 | * If the clock can not be enabled/disabled, this should return success. | |
451 | * | |
40d3e0f4 RK |
452 | * May be called from atomic contexts. |
453 | * | |
1da177e4 LT |
454 | * Returns success (0) or negative errno. |
455 | */ | |
456 | int clk_enable(struct clk *clk); | |
457 | ||
266e4e9d DA |
458 | /** |
459 | * clk_bulk_enable - inform the system when the set of clks should be running. | |
460 | * @num_clks: the number of clk_bulk_data | |
461 | * @clks: the clk_bulk_data table of consumer | |
462 | * | |
463 | * May be called from atomic contexts. | |
464 | * | |
465 | * Returns success (0) or negative errno. | |
466 | */ | |
467 | int __must_check clk_bulk_enable(int num_clks, | |
468 | const struct clk_bulk_data *clks); | |
469 | ||
1da177e4 LT |
470 | /** |
471 | * clk_disable - inform the system when the clock source is no longer required. | |
472 | * @clk: clock source | |
f47fc0ac RK |
473 | * |
474 | * Inform the system that a clock source is no longer required by | |
475 | * a driver and may be shut down. | |
476 | * | |
40d3e0f4 RK |
477 | * May be called from atomic contexts. |
478 | * | |
f47fc0ac RK |
479 | * Implementation detail: if the clock source is shared between |
480 | * multiple drivers, clk_enable() calls must be balanced by the | |
481 | * same number of clk_disable() calls for the clock source to be | |
482 | * disabled. | |
1da177e4 LT |
483 | */ |
484 | void clk_disable(struct clk *clk); | |
485 | ||
266e4e9d DA |
486 | /** |
487 | * clk_bulk_disable - inform the system when the set of clks is no | |
488 | * longer required. | |
489 | * @num_clks: the number of clk_bulk_data | |
490 | * @clks: the clk_bulk_data table of consumer | |
491 | * | |
492 | * Inform the system that a set of clks is no longer required by | |
493 | * a driver and may be shut down. | |
494 | * | |
495 | * May be called from atomic contexts. | |
496 | * | |
497 | * Implementation detail: if the set of clks is shared between | |
498 | * multiple drivers, clk_bulk_enable() calls must be balanced by the | |
499 | * same number of clk_bulk_disable() calls for the clock source to be | |
500 | * disabled. | |
501 | */ | |
502 | void clk_bulk_disable(int num_clks, const struct clk_bulk_data *clks); | |
503 | ||
1da177e4 LT |
504 | /** |
505 | * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. | |
506 | * This is only valid once the clock source has been enabled. | |
507 | * @clk: clock source | |
508 | */ | |
509 | unsigned long clk_get_rate(struct clk *clk); | |
510 | ||
511 | /** | |
512 | * clk_put - "free" the clock source | |
513 | * @clk: clock source | |
f47fc0ac RK |
514 | * |
515 | * Note: drivers must ensure that all clk_enable calls made on this | |
516 | * clock source are balanced by clk_disable calls prior to calling | |
517 | * this function. | |
f7ad160b AR |
518 | * |
519 | * clk_put should not be called from within interrupt context. | |
1da177e4 LT |
520 | */ |
521 | void clk_put(struct clk *clk); | |
522 | ||
266e4e9d DA |
523 | /** |
524 | * clk_bulk_put - "free" the clock source | |
525 | * @num_clks: the number of clk_bulk_data | |
526 | * @clks: the clk_bulk_data table of consumer | |
527 | * | |
528 | * Note: drivers must ensure that all clk_bulk_enable calls made on this | |
529 | * clock source are balanced by clk_bulk_disable calls prior to calling | |
530 | * this function. | |
531 | * | |
532 | * clk_bulk_put should not be called from within interrupt context. | |
533 | */ | |
534 | void clk_bulk_put(int num_clks, struct clk_bulk_data *clks); | |
535 | ||
616e45df DA |
536 | /** |
537 | * clk_bulk_put_all - "free" all the clock source | |
538 | * @num_clks: the number of clk_bulk_data | |
539 | * @clks: the clk_bulk_data table of consumer | |
540 | * | |
541 | * Note: drivers must ensure that all clk_bulk_enable calls made on this | |
542 | * clock source are balanced by clk_bulk_disable calls prior to calling | |
543 | * this function. | |
544 | * | |
545 | * clk_bulk_put_all should not be called from within interrupt context. | |
546 | */ | |
547 | void clk_bulk_put_all(int num_clks, struct clk_bulk_data *clks); | |
548 | ||
a8a97db9 MB |
549 | /** |
550 | * devm_clk_put - "free" a managed clock source | |
da3dae54 | 551 | * @dev: device used to acquire the clock |
a8a97db9 MB |
552 | * @clk: clock source acquired with devm_clk_get() |
553 | * | |
554 | * Note: drivers must ensure that all clk_enable calls made on this | |
555 | * clock source are balanced by clk_disable calls prior to calling | |
556 | * this function. | |
557 | * | |
558 | * clk_put should not be called from within interrupt context. | |
559 | */ | |
560 | void devm_clk_put(struct device *dev, struct clk *clk); | |
1da177e4 LT |
561 | |
562 | /* | |
563 | * The remaining APIs are optional for machine class support. | |
564 | */ | |
565 | ||
566 | ||
567 | /** | |
568 | * clk_round_rate - adjust a rate to the exact rate a clock can provide | |
569 | * @clk: clock source | |
570 | * @rate: desired clock rate in Hz | |
571 | * | |
d2d14a77 RK |
572 | * This answers the question "if I were to pass @rate to clk_set_rate(), |
573 | * what clock rate would I end up with?" without changing the hardware | |
574 | * in any way. In other words: | |
575 | * | |
576 | * rate = clk_round_rate(clk, r); | |
577 | * | |
578 | * and: | |
579 | * | |
580 | * clk_set_rate(clk, r); | |
581 | * rate = clk_get_rate(clk); | |
582 | * | |
583 | * are equivalent except the former does not modify the clock hardware | |
584 | * in any way. | |
585 | * | |
1da177e4 LT |
586 | * Returns rounded clock rate in Hz, or negative errno. |
587 | */ | |
588 | long clk_round_rate(struct clk *clk, unsigned long rate); | |
8b7730dd | 589 | |
1da177e4 LT |
590 | /** |
591 | * clk_set_rate - set the clock rate for a clock source | |
592 | * @clk: clock source | |
593 | * @rate: desired clock rate in Hz | |
594 | * | |
595 | * Returns success (0) or negative errno. | |
596 | */ | |
597 | int clk_set_rate(struct clk *clk, unsigned long rate); | |
8b7730dd | 598 | |
55e9b8b7 JB |
599 | /** |
600 | * clk_set_rate_exclusive- set the clock rate and claim exclusivity over | |
601 | * clock source | |
602 | * @clk: clock source | |
603 | * @rate: desired clock rate in Hz | |
604 | * | |
605 | * This helper function allows drivers to atomically set the rate of a producer | |
606 | * and claim exclusivity over the rate control of the producer. | |
607 | * | |
608 | * It is essentially a combination of clk_set_rate() and | |
609 | * clk_rate_exclusite_get(). Caller must balance this call with a call to | |
610 | * clk_rate_exclusive_put() | |
611 | * | |
612 | * Returns success (0) or negative errno. | |
613 | */ | |
614 | int clk_set_rate_exclusive(struct clk *clk, unsigned long rate); | |
615 | ||
4e88f3de TR |
616 | /** |
617 | * clk_has_parent - check if a clock is a possible parent for another | |
618 | * @clk: clock source | |
619 | * @parent: parent clock source | |
620 | * | |
621 | * This function can be used in drivers that need to check that a clock can be | |
622 | * the parent of another without actually changing the parent. | |
623 | * | |
624 | * Returns true if @parent is a possible parent for @clk, false otherwise. | |
625 | */ | |
626 | bool clk_has_parent(struct clk *clk, struct clk *parent); | |
627 | ||
1c8e6004 TV |
628 | /** |
629 | * clk_set_rate_range - set a rate range for a clock source | |
630 | * @clk: clock source | |
631 | * @min: desired minimum clock rate in Hz, inclusive | |
632 | * @max: desired maximum clock rate in Hz, inclusive | |
633 | * | |
634 | * Returns success (0) or negative errno. | |
635 | */ | |
636 | int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max); | |
637 | ||
638 | /** | |
639 | * clk_set_min_rate - set a minimum clock rate for a clock source | |
640 | * @clk: clock source | |
641 | * @rate: desired minimum clock rate in Hz, inclusive | |
642 | * | |
643 | * Returns success (0) or negative errno. | |
644 | */ | |
645 | int clk_set_min_rate(struct clk *clk, unsigned long rate); | |
646 | ||
647 | /** | |
648 | * clk_set_max_rate - set a maximum clock rate for a clock source | |
649 | * @clk: clock source | |
650 | * @rate: desired maximum clock rate in Hz, inclusive | |
651 | * | |
652 | * Returns success (0) or negative errno. | |
653 | */ | |
654 | int clk_set_max_rate(struct clk *clk, unsigned long rate); | |
655 | ||
1da177e4 LT |
656 | /** |
657 | * clk_set_parent - set the parent clock source for this clock | |
658 | * @clk: clock source | |
659 | * @parent: parent clock source | |
660 | * | |
661 | * Returns success (0) or negative errno. | |
662 | */ | |
663 | int clk_set_parent(struct clk *clk, struct clk *parent); | |
664 | ||
665 | /** | |
666 | * clk_get_parent - get the parent clock source for this clock | |
667 | * @clk: clock source | |
668 | * | |
669 | * Returns struct clk corresponding to parent clock source, or | |
670 | * valid IS_ERR() condition containing errno. | |
671 | */ | |
672 | struct clk *clk_get_parent(struct clk *clk); | |
673 | ||
05fd8e73 SH |
674 | /** |
675 | * clk_get_sys - get a clock based upon the device name | |
676 | * @dev_id: device name | |
677 | * @con_id: connection ID | |
678 | * | |
679 | * Returns a struct clk corresponding to the clock producer, or | |
680 | * valid IS_ERR() condition containing errno. The implementation | |
681 | * uses @dev_id and @con_id to determine the clock consumer, and | |
682 | * thereby the clock producer. In contrast to clk_get() this function | |
683 | * takes the device name instead of the device itself for identification. | |
684 | * | |
685 | * Drivers must assume that the clock source is not enabled. | |
686 | * | |
687 | * clk_get_sys should not be called from within interrupt context. | |
688 | */ | |
689 | struct clk *clk_get_sys(const char *dev_id, const char *con_id); | |
690 | ||
8b95d1ce RD |
691 | /** |
692 | * clk_save_context - save clock context for poweroff | |
693 | * | |
694 | * Saves the context of the clock register for powerstates in which the | |
695 | * contents of the registers will be lost. Occurs deep within the suspend | |
696 | * code so locking is not necessary. | |
697 | */ | |
698 | int clk_save_context(void); | |
699 | ||
700 | /** | |
701 | * clk_restore_context - restore clock context after poweroff | |
702 | * | |
703 | * This occurs with all clocks enabled. Occurs deep within the resume code | |
704 | * so locking is not necessary. | |
705 | */ | |
706 | void clk_restore_context(void); | |
707 | ||
93abe8e4 VK |
708 | #else /* !CONFIG_HAVE_CLK */ |
709 | ||
710 | static inline struct clk *clk_get(struct device *dev, const char *id) | |
711 | { | |
712 | return NULL; | |
713 | } | |
714 | ||
6e0d4ff4 DA |
715 | static inline int __must_check clk_bulk_get(struct device *dev, int num_clks, |
716 | struct clk_bulk_data *clks) | |
266e4e9d DA |
717 | { |
718 | return 0; | |
719 | } | |
720 | ||
616e45df DA |
721 | static inline int __must_check clk_bulk_get_all(struct device *dev, |
722 | struct clk_bulk_data **clks) | |
723 | { | |
724 | return 0; | |
725 | } | |
726 | ||
93abe8e4 VK |
727 | static inline struct clk *devm_clk_get(struct device *dev, const char *id) |
728 | { | |
729 | return NULL; | |
730 | } | |
731 | ||
60b8f0dd PE |
732 | static inline struct clk *devm_clk_get_optional(struct device *dev, |
733 | const char *id) | |
734 | { | |
735 | return NULL; | |
736 | } | |
737 | ||
6e0d4ff4 DA |
738 | static inline int __must_check devm_clk_bulk_get(struct device *dev, int num_clks, |
739 | struct clk_bulk_data *clks) | |
618aee02 DA |
740 | { |
741 | return 0; | |
742 | } | |
743 | ||
f08c2e28 DA |
744 | static inline int __must_check devm_clk_bulk_get_all(struct device *dev, |
745 | struct clk_bulk_data **clks) | |
746 | { | |
747 | ||
748 | return 0; | |
749 | } | |
750 | ||
71a2f115 KM |
751 | static inline struct clk *devm_get_clk_from_child(struct device *dev, |
752 | struct device_node *np, const char *con_id) | |
753 | { | |
754 | return NULL; | |
755 | } | |
756 | ||
93abe8e4 VK |
757 | static inline void clk_put(struct clk *clk) {} |
758 | ||
266e4e9d DA |
759 | static inline void clk_bulk_put(int num_clks, struct clk_bulk_data *clks) {} |
760 | ||
616e45df DA |
761 | static inline void clk_bulk_put_all(int num_clks, struct clk_bulk_data *clks) {} |
762 | ||
93abe8e4 VK |
763 | static inline void devm_clk_put(struct device *dev, struct clk *clk) {} |
764 | ||
55e9b8b7 JB |
765 | |
766 | static inline int clk_rate_exclusive_get(struct clk *clk) | |
767 | { | |
768 | return 0; | |
769 | } | |
770 | ||
771 | static inline void clk_rate_exclusive_put(struct clk *clk) {} | |
772 | ||
93abe8e4 VK |
773 | static inline int clk_enable(struct clk *clk) |
774 | { | |
775 | return 0; | |
776 | } | |
777 | ||
6e0d4ff4 | 778 | static inline int __must_check clk_bulk_enable(int num_clks, struct clk_bulk_data *clks) |
266e4e9d DA |
779 | { |
780 | return 0; | |
781 | } | |
782 | ||
93abe8e4 VK |
783 | static inline void clk_disable(struct clk *clk) {} |
784 | ||
266e4e9d DA |
785 | |
786 | static inline void clk_bulk_disable(int num_clks, | |
787 | struct clk_bulk_data *clks) {} | |
788 | ||
93abe8e4 VK |
789 | static inline unsigned long clk_get_rate(struct clk *clk) |
790 | { | |
791 | return 0; | |
792 | } | |
793 | ||
794 | static inline int clk_set_rate(struct clk *clk, unsigned long rate) | |
795 | { | |
796 | return 0; | |
797 | } | |
798 | ||
55e9b8b7 JB |
799 | static inline int clk_set_rate_exclusive(struct clk *clk, unsigned long rate) |
800 | { | |
801 | return 0; | |
802 | } | |
803 | ||
93abe8e4 VK |
804 | static inline long clk_round_rate(struct clk *clk, unsigned long rate) |
805 | { | |
806 | return 0; | |
807 | } | |
808 | ||
4e88f3de TR |
809 | static inline bool clk_has_parent(struct clk *clk, struct clk *parent) |
810 | { | |
811 | return true; | |
812 | } | |
813 | ||
93abe8e4 VK |
814 | static inline int clk_set_parent(struct clk *clk, struct clk *parent) |
815 | { | |
816 | return 0; | |
817 | } | |
818 | ||
819 | static inline struct clk *clk_get_parent(struct clk *clk) | |
820 | { | |
821 | return NULL; | |
822 | } | |
823 | ||
b81ea968 DL |
824 | static inline struct clk *clk_get_sys(const char *dev_id, const char *con_id) |
825 | { | |
826 | return NULL; | |
827 | } | |
8b95d1ce RD |
828 | |
829 | static inline int clk_save_context(void) | |
830 | { | |
831 | return 0; | |
832 | } | |
833 | ||
834 | static inline void clk_restore_context(void) {} | |
835 | ||
93abe8e4 VK |
836 | #endif |
837 | ||
838 | /* clk_prepare_enable helps cases using clk_enable in non-atomic context. */ | |
839 | static inline int clk_prepare_enable(struct clk *clk) | |
840 | { | |
841 | int ret; | |
842 | ||
843 | ret = clk_prepare(clk); | |
844 | if (ret) | |
845 | return ret; | |
846 | ret = clk_enable(clk); | |
847 | if (ret) | |
848 | clk_unprepare(clk); | |
849 | ||
850 | return ret; | |
851 | } | |
852 | ||
853 | /* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */ | |
854 | static inline void clk_disable_unprepare(struct clk *clk) | |
855 | { | |
856 | clk_disable(clk); | |
857 | clk_unprepare(clk); | |
858 | } | |
859 | ||
6e0d4ff4 DA |
860 | static inline int __must_check clk_bulk_prepare_enable(int num_clks, |
861 | struct clk_bulk_data *clks) | |
3c48d86c BA |
862 | { |
863 | int ret; | |
864 | ||
865 | ret = clk_bulk_prepare(num_clks, clks); | |
866 | if (ret) | |
867 | return ret; | |
868 | ret = clk_bulk_enable(num_clks, clks); | |
869 | if (ret) | |
870 | clk_bulk_unprepare(num_clks, clks); | |
871 | ||
872 | return ret; | |
873 | } | |
874 | ||
875 | static inline void clk_bulk_disable_unprepare(int num_clks, | |
876 | struct clk_bulk_data *clks) | |
877 | { | |
878 | clk_bulk_disable(num_clks, clks); | |
879 | clk_bulk_unprepare(num_clks, clks); | |
880 | } | |
881 | ||
60b8f0dd PE |
882 | /** |
883 | * clk_get_optional - lookup and obtain a reference to an optional clock | |
884 | * producer. | |
885 | * @dev: device for clock "consumer" | |
886 | * @id: clock consumer ID | |
887 | * | |
888 | * Behaves the same as clk_get() except where there is no clock producer. In | |
889 | * this case, instead of returning -ENOENT, the function returns NULL. | |
890 | */ | |
891 | static inline struct clk *clk_get_optional(struct device *dev, const char *id) | |
892 | { | |
893 | struct clk *clk = clk_get(dev, id); | |
894 | ||
895 | if (clk == ERR_PTR(-ENOENT)) | |
896 | return NULL; | |
897 | ||
898 | return clk; | |
899 | } | |
900 | ||
137f8a72 | 901 | #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK) |
766e6a4e GL |
902 | struct clk *of_clk_get(struct device_node *np, int index); |
903 | struct clk *of_clk_get_by_name(struct device_node *np, const char *name); | |
904 | struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec); | |
905 | #else | |
906 | static inline struct clk *of_clk_get(struct device_node *np, int index) | |
907 | { | |
9f1612d3 | 908 | return ERR_PTR(-ENOENT); |
766e6a4e GL |
909 | } |
910 | static inline struct clk *of_clk_get_by_name(struct device_node *np, | |
911 | const char *name) | |
912 | { | |
9f1612d3 | 913 | return ERR_PTR(-ENOENT); |
766e6a4e | 914 | } |
428c9de5 GU |
915 | static inline struct clk *of_clk_get_from_provider(struct of_phandle_args *clkspec) |
916 | { | |
917 | return ERR_PTR(-ENOENT); | |
918 | } | |
766e6a4e GL |
919 | #endif |
920 | ||
1da177e4 | 921 | #endif |