Commit | Line | Data |
---|---|---|
b2476490 MT |
1 | /* |
2 | * linux/include/linux/clk-provider.h | |
3 | * | |
4 | * Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com> | |
5 | * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
10 | */ | |
11 | #ifndef __LINUX_CLK_PROVIDER_H | |
12 | #define __LINUX_CLK_PROVIDER_H | |
13 | ||
14 | #include <linux/clk.h> | |
15 | ||
16 | #ifdef CONFIG_COMMON_CLK | |
17 | ||
b2476490 MT |
18 | /* |
19 | * flags used across common struct clk. these flags should only affect the | |
20 | * top-level framework. custom flags for dealing with hardware specifics | |
21 | * belong in struct clk_foo | |
22 | */ | |
23 | #define CLK_SET_RATE_GATE BIT(0) /* must be gated across rate change */ | |
24 | #define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */ | |
25 | #define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */ | |
26 | #define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ | |
27 | #define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ | |
f7d8caad | 28 | #define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */ |
a093bde2 | 29 | #define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */ |
b2476490 | 30 | |
0197b3ea SK |
31 | struct clk_hw; |
32 | ||
b2476490 MT |
33 | /** |
34 | * struct clk_ops - Callback operations for hardware clocks; these are to | |
35 | * be provided by the clock implementation, and will be called by drivers | |
36 | * through the clk_* api. | |
37 | * | |
38 | * @prepare: Prepare the clock for enabling. This must not return until | |
39 | * the clock is fully prepared, and it's safe to call clk_enable. | |
40 | * This callback is intended to allow clock implementations to | |
41 | * do any initialisation that may sleep. Called with | |
42 | * prepare_lock held. | |
43 | * | |
44 | * @unprepare: Release the clock from its prepared state. This will typically | |
45 | * undo any work done in the @prepare callback. Called with | |
46 | * prepare_lock held. | |
47 | * | |
48 | * @enable: Enable the clock atomically. This must not return until the | |
49 | * clock is generating a valid clock signal, usable by consumer | |
50 | * devices. Called with enable_lock held. This function must not | |
51 | * sleep. | |
52 | * | |
53 | * @disable: Disable the clock atomically. Called with enable_lock held. | |
54 | * This function must not sleep. | |
55 | * | |
119c7127 SB |
56 | * @is_enabled: Queries the hardware to determine if the clock is enabled. |
57 | * This function must not sleep. Optional, if this op is not | |
58 | * set then the enable count will be used. | |
59 | * | |
7c045a55 MT |
60 | * @disable_unused: Disable the clock atomically. Only called from |
61 | * clk_disable_unused for gate clocks with special needs. | |
62 | * Called with enable_lock held. This function must not | |
63 | * sleep. | |
64 | * | |
7ce3e8cc | 65 | * @recalc_rate Recalculate the rate of this clock, by querying hardware. The |
b2476490 | 66 | * parent rate is an input parameter. It is up to the caller to |
7ce3e8cc | 67 | * ensure that the prepare_mutex is held across this call. |
b2476490 MT |
68 | * Returns the calculated rate. Optional, but recommended - if |
69 | * this op is not set then clock rate will be initialized to 0. | |
70 | * | |
71 | * @round_rate: Given a target rate as input, returns the closest rate actually | |
72 | * supported by the clock. | |
73 | * | |
74 | * @get_parent: Queries the hardware to determine the parent of a clock. The | |
75 | * return value is a u8 which specifies the index corresponding to | |
76 | * the parent clock. This index can be applied to either the | |
77 | * .parent_names or .parents arrays. In short, this function | |
78 | * translates the parent value read from hardware into an array | |
79 | * index. Currently only called when the clock is initialized by | |
80 | * __clk_init. This callback is mandatory for clocks with | |
81 | * multiple parents. It is optional (and unnecessary) for clocks | |
82 | * with 0 or 1 parents. | |
83 | * | |
84 | * @set_parent: Change the input source of this clock; for clocks with multiple | |
85 | * possible parents specify a new parent by passing in the index | |
86 | * as a u8 corresponding to the parent in either the .parent_names | |
87 | * or .parents arrays. This function in affect translates an | |
88 | * array index into the value programmed into the hardware. | |
89 | * Returns 0 on success, -EERROR otherwise. | |
90 | * | |
1c0035d7 SG |
91 | * @set_rate: Change the rate of this clock. The requested rate is specified |
92 | * by the second argument, which should typically be the return | |
93 | * of .round_rate call. The third argument gives the parent rate | |
94 | * which is likely helpful for most .set_rate implementation. | |
95 | * Returns 0 on success, -EERROR otherwise. | |
b2476490 MT |
96 | * |
97 | * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow | |
98 | * implementations to split any work between atomic (enable) and sleepable | |
99 | * (prepare) contexts. If enabling a clock requires code that might sleep, | |
100 | * this must be done in clk_prepare. Clock enable code that will never be | |
7ce3e8cc | 101 | * called in a sleepable context may be implemented in clk_enable. |
b2476490 MT |
102 | * |
103 | * Typically, drivers will call clk_prepare when a clock may be needed later | |
104 | * (eg. when a device is opened), and clk_enable when the clock is actually | |
105 | * required (eg. from an interrupt). Note that clk_prepare MUST have been | |
106 | * called before clk_enable. | |
107 | */ | |
108 | struct clk_ops { | |
109 | int (*prepare)(struct clk_hw *hw); | |
110 | void (*unprepare)(struct clk_hw *hw); | |
111 | int (*enable)(struct clk_hw *hw); | |
112 | void (*disable)(struct clk_hw *hw); | |
113 | int (*is_enabled)(struct clk_hw *hw); | |
7c045a55 | 114 | void (*disable_unused)(struct clk_hw *hw); |
b2476490 MT |
115 | unsigned long (*recalc_rate)(struct clk_hw *hw, |
116 | unsigned long parent_rate); | |
117 | long (*round_rate)(struct clk_hw *hw, unsigned long, | |
118 | unsigned long *); | |
119 | int (*set_parent)(struct clk_hw *hw, u8 index); | |
120 | u8 (*get_parent)(struct clk_hw *hw); | |
1c0035d7 SG |
121 | int (*set_rate)(struct clk_hw *hw, unsigned long, |
122 | unsigned long); | |
b2476490 MT |
123 | void (*init)(struct clk_hw *hw); |
124 | }; | |
125 | ||
0197b3ea SK |
126 | /** |
127 | * struct clk_init_data - holds init data that's common to all clocks and is | |
128 | * shared between the clock provider and the common clock framework. | |
129 | * | |
130 | * @name: clock name | |
131 | * @ops: operations this clock supports | |
132 | * @parent_names: array of string names for all possible parents | |
133 | * @num_parents: number of possible parents | |
134 | * @flags: framework-level hints and quirks | |
135 | */ | |
136 | struct clk_init_data { | |
137 | const char *name; | |
138 | const struct clk_ops *ops; | |
139 | const char **parent_names; | |
140 | u8 num_parents; | |
141 | unsigned long flags; | |
142 | }; | |
143 | ||
144 | /** | |
145 | * struct clk_hw - handle for traversing from a struct clk to its corresponding | |
146 | * hardware-specific structure. struct clk_hw should be declared within struct | |
147 | * clk_foo and then referenced by the struct clk instance that uses struct | |
148 | * clk_foo's clk_ops | |
149 | * | |
150 | * @clk: pointer to the struct clk instance that points back to this struct | |
151 | * clk_hw instance | |
152 | * | |
153 | * @init: pointer to struct clk_init_data that contains the init data shared | |
154 | * with the common clock framework. | |
155 | */ | |
156 | struct clk_hw { | |
157 | struct clk *clk; | |
dc4cd941 | 158 | const struct clk_init_data *init; |
0197b3ea SK |
159 | }; |
160 | ||
9d9f78ed MT |
161 | /* |
162 | * DOC: Basic clock implementations common to many platforms | |
163 | * | |
164 | * Each basic clock hardware type is comprised of a structure describing the | |
165 | * clock hardware, implementations of the relevant callbacks in struct clk_ops, | |
166 | * unique flags for that hardware type, a registration function and an | |
167 | * alternative macro for static initialization | |
168 | */ | |
169 | ||
170 | /** | |
171 | * struct clk_fixed_rate - fixed-rate clock | |
172 | * @hw: handle between common and hardware-specific interfaces | |
173 | * @fixed_rate: constant frequency of clock | |
174 | */ | |
175 | struct clk_fixed_rate { | |
176 | struct clk_hw hw; | |
177 | unsigned long fixed_rate; | |
178 | u8 flags; | |
179 | }; | |
180 | ||
bffad66e | 181 | extern const struct clk_ops clk_fixed_rate_ops; |
9d9f78ed MT |
182 | struct clk *clk_register_fixed_rate(struct device *dev, const char *name, |
183 | const char *parent_name, unsigned long flags, | |
184 | unsigned long fixed_rate); | |
185 | ||
015ba402 GL |
186 | void of_fixed_clk_setup(struct device_node *np); |
187 | ||
9d9f78ed MT |
188 | /** |
189 | * struct clk_gate - gating clock | |
190 | * | |
191 | * @hw: handle between common and hardware-specific interfaces | |
192 | * @reg: register controlling gate | |
193 | * @bit_idx: single bit controlling gate | |
194 | * @flags: hardware-specific flags | |
195 | * @lock: register lock | |
196 | * | |
197 | * Clock which can gate its output. Implements .enable & .disable | |
198 | * | |
199 | * Flags: | |
1f73f31a | 200 | * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to |
9d9f78ed MT |
201 | * enable the clock. Setting this flag does the opposite: setting the bit |
202 | * disable the clock and clearing it enables the clock | |
203 | */ | |
204 | struct clk_gate { | |
205 | struct clk_hw hw; | |
206 | void __iomem *reg; | |
207 | u8 bit_idx; | |
208 | u8 flags; | |
209 | spinlock_t *lock; | |
9d9f78ed MT |
210 | }; |
211 | ||
212 | #define CLK_GATE_SET_TO_DISABLE BIT(0) | |
213 | ||
bffad66e | 214 | extern const struct clk_ops clk_gate_ops; |
9d9f78ed MT |
215 | struct clk *clk_register_gate(struct device *dev, const char *name, |
216 | const char *parent_name, unsigned long flags, | |
217 | void __iomem *reg, u8 bit_idx, | |
218 | u8 clk_gate_flags, spinlock_t *lock); | |
219 | ||
357c3f0a RN |
220 | struct clk_div_table { |
221 | unsigned int val; | |
222 | unsigned int div; | |
223 | }; | |
224 | ||
9d9f78ed MT |
225 | /** |
226 | * struct clk_divider - adjustable divider clock | |
227 | * | |
228 | * @hw: handle between common and hardware-specific interfaces | |
229 | * @reg: register containing the divider | |
230 | * @shift: shift to the divider bit field | |
231 | * @width: width of the divider bit field | |
357c3f0a | 232 | * @table: array of value/divider pairs, last entry should have div = 0 |
9d9f78ed MT |
233 | * @lock: register lock |
234 | * | |
235 | * Clock with an adjustable divider affecting its output frequency. Implements | |
236 | * .recalc_rate, .set_rate and .round_rate | |
237 | * | |
238 | * Flags: | |
239 | * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the | |
240 | * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is | |
241 | * the raw value read from the register, with the value of zero considered | |
242 | * invalid | |
243 | * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from | |
244 | * the hardware register | |
245 | */ | |
246 | struct clk_divider { | |
247 | struct clk_hw hw; | |
248 | void __iomem *reg; | |
249 | u8 shift; | |
250 | u8 width; | |
251 | u8 flags; | |
357c3f0a | 252 | const struct clk_div_table *table; |
9d9f78ed | 253 | spinlock_t *lock; |
9d9f78ed MT |
254 | }; |
255 | ||
256 | #define CLK_DIVIDER_ONE_BASED BIT(0) | |
257 | #define CLK_DIVIDER_POWER_OF_TWO BIT(1) | |
258 | ||
bffad66e | 259 | extern const struct clk_ops clk_divider_ops; |
9d9f78ed MT |
260 | struct clk *clk_register_divider(struct device *dev, const char *name, |
261 | const char *parent_name, unsigned long flags, | |
262 | void __iomem *reg, u8 shift, u8 width, | |
263 | u8 clk_divider_flags, spinlock_t *lock); | |
357c3f0a RN |
264 | struct clk *clk_register_divider_table(struct device *dev, const char *name, |
265 | const char *parent_name, unsigned long flags, | |
266 | void __iomem *reg, u8 shift, u8 width, | |
267 | u8 clk_divider_flags, const struct clk_div_table *table, | |
268 | spinlock_t *lock); | |
9d9f78ed MT |
269 | |
270 | /** | |
271 | * struct clk_mux - multiplexer clock | |
272 | * | |
273 | * @hw: handle between common and hardware-specific interfaces | |
274 | * @reg: register controlling multiplexer | |
275 | * @shift: shift to multiplexer bit field | |
276 | * @width: width of mutliplexer bit field | |
277 | * @num_clks: number of parent clocks | |
278 | * @lock: register lock | |
279 | * | |
280 | * Clock with multiple selectable parents. Implements .get_parent, .set_parent | |
281 | * and .recalc_rate | |
282 | * | |
283 | * Flags: | |
284 | * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 | |
1f73f31a | 285 | * CLK_MUX_INDEX_BIT - register index is a single bit (power of two) |
9d9f78ed MT |
286 | */ |
287 | struct clk_mux { | |
288 | struct clk_hw hw; | |
289 | void __iomem *reg; | |
290 | u8 shift; | |
291 | u8 width; | |
292 | u8 flags; | |
293 | spinlock_t *lock; | |
294 | }; | |
295 | ||
296 | #define CLK_MUX_INDEX_ONE BIT(0) | |
297 | #define CLK_MUX_INDEX_BIT BIT(1) | |
298 | ||
bffad66e | 299 | extern const struct clk_ops clk_mux_ops; |
9d9f78ed | 300 | struct clk *clk_register_mux(struct device *dev, const char *name, |
d305fb78 | 301 | const char **parent_names, u8 num_parents, unsigned long flags, |
9d9f78ed MT |
302 | void __iomem *reg, u8 shift, u8 width, |
303 | u8 clk_mux_flags, spinlock_t *lock); | |
b2476490 | 304 | |
f0948f59 SH |
305 | /** |
306 | * struct clk_fixed_factor - fixed multiplier and divider clock | |
307 | * | |
308 | * @hw: handle between common and hardware-specific interfaces | |
309 | * @mult: multiplier | |
310 | * @div: divider | |
311 | * | |
312 | * Clock with a fixed multiplier and divider. The output frequency is the | |
313 | * parent clock rate divided by div and multiplied by mult. | |
314 | * Implements .recalc_rate, .set_rate and .round_rate | |
315 | */ | |
316 | ||
317 | struct clk_fixed_factor { | |
318 | struct clk_hw hw; | |
319 | unsigned int mult; | |
320 | unsigned int div; | |
321 | }; | |
322 | ||
323 | extern struct clk_ops clk_fixed_factor_ops; | |
324 | struct clk *clk_register_fixed_factor(struct device *dev, const char *name, | |
325 | const char *parent_name, unsigned long flags, | |
326 | unsigned int mult, unsigned int div); | |
327 | ||
b2476490 MT |
328 | /** |
329 | * clk_register - allocate a new clock, register it and return an opaque cookie | |
330 | * @dev: device that is registering this clock | |
b2476490 | 331 | * @hw: link to hardware-specific clock data |
b2476490 MT |
332 | * |
333 | * clk_register is the primary interface for populating the clock tree with new | |
334 | * clock nodes. It returns a pointer to the newly allocated struct clk which | |
335 | * cannot be dereferenced by driver code but may be used in conjuction with the | |
d1302a36 MT |
336 | * rest of the clock API. In the event of an error clk_register will return an |
337 | * error code; drivers must test for an error code after calling clk_register. | |
b2476490 | 338 | */ |
0197b3ea | 339 | struct clk *clk_register(struct device *dev, struct clk_hw *hw); |
46c8773a | 340 | struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw); |
b2476490 | 341 | |
1df5c939 | 342 | void clk_unregister(struct clk *clk); |
46c8773a | 343 | void devm_clk_unregister(struct device *dev, struct clk *clk); |
1df5c939 | 344 | |
b2476490 MT |
345 | /* helper functions */ |
346 | const char *__clk_get_name(struct clk *clk); | |
347 | struct clk_hw *__clk_get_hw(struct clk *clk); | |
348 | u8 __clk_get_num_parents(struct clk *clk); | |
349 | struct clk *__clk_get_parent(struct clk *clk); | |
93874681 LT |
350 | unsigned int __clk_get_enable_count(struct clk *clk); |
351 | unsigned int __clk_get_prepare_count(struct clk *clk); | |
b2476490 MT |
352 | unsigned long __clk_get_rate(struct clk *clk); |
353 | unsigned long __clk_get_flags(struct clk *clk); | |
2ac6b1f5 | 354 | bool __clk_is_enabled(struct clk *clk); |
b2476490 MT |
355 | struct clk *__clk_lookup(const char *name); |
356 | ||
357 | /* | |
358 | * FIXME clock api without lock protection | |
359 | */ | |
360 | int __clk_prepare(struct clk *clk); | |
361 | void __clk_unprepare(struct clk *clk); | |
362 | void __clk_reparent(struct clk *clk, struct clk *new_parent); | |
363 | unsigned long __clk_round_rate(struct clk *clk, unsigned long rate); | |
364 | ||
766e6a4e GL |
365 | struct of_device_id; |
366 | ||
367 | typedef void (*of_clk_init_cb_t)(struct device_node *); | |
368 | ||
369 | int of_clk_add_provider(struct device_node *np, | |
370 | struct clk *(*clk_src_get)(struct of_phandle_args *args, | |
371 | void *data), | |
372 | void *data); | |
373 | void of_clk_del_provider(struct device_node *np); | |
374 | struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, | |
375 | void *data); | |
494bfec9 SG |
376 | struct clk_onecell_data { |
377 | struct clk **clks; | |
378 | unsigned int clk_num; | |
379 | }; | |
380 | struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data); | |
766e6a4e | 381 | const char *of_clk_get_parent_name(struct device_node *np, int index); |
f2f6c255 | 382 | |
766e6a4e GL |
383 | void of_clk_init(const struct of_device_id *matches); |
384 | ||
f2f6c255 PG |
385 | #define CLK_OF_DECLARE(name, compat, fn) \ |
386 | static const struct of_device_id __clk_of_table_##name \ | |
387 | __used __section(__clk_of_table) \ | |
388 | = { .compatible = compat, .data = fn }; | |
389 | ||
b2476490 MT |
390 | #endif /* CONFIG_COMMON_CLK */ |
391 | #endif /* CLK_PROVIDER_H */ |