Commit | Line | Data |
---|---|---|
7a846d3c LJ |
1 | /* SPDX-License-Identifier: GPL-2.0 */ |
2 | #ifndef __DT_POWER_DELIVERY_H | |
3 | #define __DT_POWER_DELIVERY_H | |
4 | ||
5 | /* Power delivery Power Data Object definitions */ | |
6 | #define PDO_TYPE_FIXED 0 | |
7 | #define PDO_TYPE_BATT 1 | |
8 | #define PDO_TYPE_VAR 2 | |
9 | #define PDO_TYPE_APDO 3 | |
10 | ||
11 | #define PDO_TYPE_SHIFT 30 | |
12 | #define PDO_TYPE_MASK 0x3 | |
13 | ||
14 | #define PDO_TYPE(t) ((t) << PDO_TYPE_SHIFT) | |
15 | ||
16 | #define PDO_VOLT_MASK 0x3ff | |
17 | #define PDO_CURR_MASK 0x3ff | |
18 | #define PDO_PWR_MASK 0x3ff | |
19 | ||
20 | #define PDO_FIXED_DUAL_ROLE (1 << 29) /* Power role swap supported */ | |
21 | #define PDO_FIXED_SUSPEND (1 << 28) /* USB Suspend supported (Source) */ | |
22 | #define PDO_FIXED_HIGHER_CAP (1 << 28) /* Requires more than vSafe5V (Sink) */ | |
23 | #define PDO_FIXED_EXTPOWER (1 << 27) /* Externally powered */ | |
24 | #define PDO_FIXED_USB_COMM (1 << 26) /* USB communications capable */ | |
25 | #define PDO_FIXED_DATA_SWAP (1 << 25) /* Data role swap supported */ | |
26 | #define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */ | |
27 | #define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ | |
28 | ||
29 | #define PDO_FIXED_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT) | |
30 | #define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT) | |
31 | ||
32 | #define PDO_FIXED(mv, ma, flags) \ | |
33 | (PDO_TYPE(PDO_TYPE_FIXED) | (flags) | \ | |
34 | PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma)) | |
35 | ||
36 | #define VSAFE5V 5000 /* mv units */ | |
37 | ||
38 | #define PDO_BATT_MAX_VOLT_SHIFT 20 /* 50mV units */ | |
39 | #define PDO_BATT_MIN_VOLT_SHIFT 10 /* 50mV units */ | |
40 | #define PDO_BATT_MAX_PWR_SHIFT 0 /* 250mW units */ | |
41 | ||
42 | #define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT) | |
43 | #define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT) | |
44 | #define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT) | |
45 | ||
46 | #define PDO_BATT(min_mv, max_mv, max_mw) \ | |
47 | (PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MIN_VOLT(min_mv) | \ | |
48 | PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_MAX_POWER(max_mw)) | |
49 | ||
50 | #define PDO_VAR_MAX_VOLT_SHIFT 20 /* 50mV units */ | |
51 | #define PDO_VAR_MIN_VOLT_SHIFT 10 /* 50mV units */ | |
52 | #define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */ | |
53 | ||
54 | #define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT) | |
55 | #define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT) | |
56 | #define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT) | |
57 | ||
58 | #define PDO_VAR(min_mv, max_mv, max_ma) \ | |
59 | (PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_VOLT(min_mv) | \ | |
60 | PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MAX_CURR(max_ma)) | |
61 | ||
63f59b73 AT |
62 | #define APDO_TYPE_PPS 0 |
63 | ||
64 | #define PDO_APDO_TYPE_SHIFT 28 /* Only valid value currently is 0x0 - PPS */ | |
65 | #define PDO_APDO_TYPE_MASK 0x3 | |
66 | ||
67 | #define PDO_APDO_TYPE(t) ((t) << PDO_APDO_TYPE_SHIFT) | |
68 | ||
69 | #define PDO_PPS_APDO_MAX_VOLT_SHIFT 17 /* 100mV units */ | |
70 | #define PDO_PPS_APDO_MIN_VOLT_SHIFT 8 /* 100mV units */ | |
71 | #define PDO_PPS_APDO_MAX_CURR_SHIFT 0 /* 50mA units */ | |
72 | ||
73 | #define PDO_PPS_APDO_VOLT_MASK 0xff | |
74 | #define PDO_PPS_APDO_CURR_MASK 0x7f | |
75 | ||
76 | #define PDO_PPS_APDO_MIN_VOLT(mv) \ | |
77 | ((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MIN_VOLT_SHIFT) | |
78 | #define PDO_PPS_APDO_MAX_VOLT(mv) \ | |
79 | ((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MAX_VOLT_SHIFT) | |
80 | #define PDO_PPS_APDO_MAX_CURR(ma) \ | |
81 | ((((ma) / 50) & PDO_PPS_APDO_CURR_MASK) << PDO_PPS_APDO_MAX_CURR_SHIFT) | |
82 | ||
83 | #define PDO_PPS_APDO(min_mv, max_mv, max_ma) \ | |
84 | (PDO_TYPE(PDO_TYPE_APDO) | PDO_APDO_TYPE(APDO_TYPE_PPS) | \ | |
85 | PDO_PPS_APDO_MIN_VOLT(min_mv) | PDO_PPS_APDO_MAX_VOLT(max_mv) | \ | |
86 | PDO_PPS_APDO_MAX_CURR(max_ma)) | |
87 | ||
5ed132db BJS |
88 | /* |
89 | * Based on "Table 6-14 Fixed Supply PDO - Sink" of "USB Power Delivery Specification Revision 3.0, | |
90 | * Version 1.2" | |
91 | * Initial current capability of the new source when vSafe5V is applied. | |
92 | */ | |
93 | #define FRS_DEFAULT_POWER 1 | |
94 | #define FRS_5V_1P5A 2 | |
95 | #define FRS_5V_3A 3 | |
630dce28 KT |
96 | |
97 | /* | |
98 | * SVDM Identity Header | |
99 | * -------------------- | |
100 | * <31> :: data capable as a USB host | |
101 | * <30> :: data capable as a USB device | |
102 | * <29:27> :: product type (UFP / Cable / VPD) | |
103 | * <26> :: modal operation supported (1b == yes) | |
104 | * <25:23> :: product type (DFP) (SVDM version 2.0+ only; set to zero in version 1.0) | |
105 | * <22:21> :: connector type (SVDM version 2.0+ only; set to zero in version 1.0) | |
106 | * <20:16> :: Reserved, Shall be set to zero | |
107 | * <15:0> :: USB-IF assigned VID for this cable vendor | |
108 | */ | |
55b54c26 KT |
109 | |
110 | /* PD Rev2.0 definition */ | |
111 | #define IDH_PTYPE_UNDEF 0 | |
112 | ||
630dce28 KT |
113 | /* SOP Product Type (UFP) */ |
114 | #define IDH_PTYPE_NOT_UFP 0 | |
115 | #define IDH_PTYPE_HUB 1 | |
116 | #define IDH_PTYPE_PERIPH 2 | |
117 | #define IDH_PTYPE_PSD 3 | |
118 | #define IDH_PTYPE_AMA 5 | |
119 | ||
120 | /* SOP' Product Type (Cable Plug / VPD) */ | |
121 | #define IDH_PTYPE_NOT_CABLE 0 | |
122 | #define IDH_PTYPE_PCABLE 3 | |
123 | #define IDH_PTYPE_ACABLE 4 | |
124 | #define IDH_PTYPE_VPD 6 | |
125 | ||
126 | /* SOP Product Type (DFP) */ | |
127 | #define IDH_PTYPE_NOT_DFP 0 | |
128 | #define IDH_PTYPE_DFP_HUB 1 | |
129 | #define IDH_PTYPE_DFP_HOST 2 | |
130 | #define IDH_PTYPE_DFP_PB 3 | |
131 | ||
132 | #define VDO_IDH(usbh, usbd, ufp_cable, is_modal, dfp, conn, vid) \ | |
133 | ((usbh) << 31 | (usbd) << 30 | ((ufp_cable) & 0x7) << 27 \ | |
134 | | (is_modal) << 26 | ((dfp) & 0x7) << 23 | ((conn) & 0x3) << 21 \ | |
135 | | ((vid) & 0xffff)) | |
136 | ||
137 | /* | |
138 | * Cert Stat VDO | |
139 | * ------------- | |
140 | * <31:0> : USB-IF assigned XID for this cable | |
141 | */ | |
142 | #define VDO_CERT(xid) ((xid) & 0xffffffff) | |
143 | ||
144 | /* | |
145 | * Product VDO | |
146 | * ----------- | |
147 | * <31:16> : USB Product ID | |
148 | * <15:0> : USB bcdDevice | |
149 | */ | |
150 | #define VDO_PRODUCT(pid, bcd) (((pid) & 0xffff) << 16 | ((bcd) & 0xffff)) | |
151 | ||
152 | /* | |
153 | * UFP VDO (PD Revision 3.0+ only) | |
154 | * -------- | |
155 | * <31:29> :: UFP VDO version | |
156 | * <28> :: Reserved | |
157 | * <27:24> :: Device capability | |
158 | * <23:22> :: Connector type (10b == receptacle, 11b == captive plug) | |
159 | * <21:11> :: Reserved | |
160 | * <10:8> :: Vconn power (AMA only) | |
161 | * <7> :: Vconn required (AMA only, 0b == no, 1b == yes) | |
162 | * <6> :: Vbus required (AMA only, 0b == yes, 1b == no) | |
163 | * <5:3> :: Alternate modes | |
164 | * <2:0> :: USB highest speed | |
165 | */ | |
166 | /* UFP VDO Version */ | |
167 | #define UFP_VDO_VER1_2 2 | |
168 | ||
169 | /* Device Capability */ | |
9257bd80 KT |
170 | #define DEV_USB2_CAPABLE (1 << 0) |
171 | #define DEV_USB2_BILLBOARD (1 << 1) | |
172 | #define DEV_USB3_CAPABLE (1 << 2) | |
173 | #define DEV_USB4_CAPABLE (1 << 3) | |
630dce28 KT |
174 | |
175 | /* Connector Type */ | |
176 | #define UFP_RECEPTACLE 2 | |
177 | #define UFP_CAPTIVE 3 | |
178 | ||
179 | /* Vconn Power (AMA only, set to AMA_VCONN_NOT_REQ if Vconn is not required) */ | |
180 | #define AMA_VCONN_PWR_1W 0 | |
181 | #define AMA_VCONN_PWR_1W5 1 | |
182 | #define AMA_VCONN_PWR_2W 2 | |
183 | #define AMA_VCONN_PWR_3W 3 | |
184 | #define AMA_VCONN_PWR_4W 4 | |
185 | #define AMA_VCONN_PWR_5W 5 | |
186 | #define AMA_VCONN_PWR_6W 6 | |
187 | ||
188 | /* Vconn Required (AMA only) */ | |
189 | #define AMA_VCONN_NOT_REQ 0 | |
190 | #define AMA_VCONN_REQ 1 | |
191 | ||
192 | /* Vbus Required (AMA only) */ | |
193 | #define AMA_VBUS_REQ 0 | |
194 | #define AMA_VBUS_NOT_REQ 1 | |
195 | ||
196 | /* Alternate Modes */ | |
197 | #define UFP_ALTMODE_NOT_SUPP 0 | |
9257bd80 KT |
198 | #define UFP_ALTMODE_TBT3 (1 << 0) |
199 | #define UFP_ALTMODE_RECFG (1 << 1) | |
200 | #define UFP_ALTMODE_NO_RECFG (1 << 2) | |
630dce28 KT |
201 | |
202 | /* USB Highest Speed */ | |
203 | #define UFP_USB2_ONLY 0 | |
204 | #define UFP_USB32_GEN1 1 | |
205 | #define UFP_USB32_4_GEN2 2 | |
206 | #define UFP_USB4_GEN3 3 | |
207 | ||
208 | #define VDO_UFP(ver, cap, conn, vcpwr, vcr, vbr, alt, spd) \ | |
209 | (((ver) & 0x7) << 29 | ((cap) & 0xf) << 24 | ((conn) & 0x3) << 22 \ | |
210 | | ((vcpwr) & 0x7) << 8 | (vcr) << 7 | (vbr) << 6 | ((alt) & 0x7) << 3 \ | |
211 | | ((spd) & 0x7)) | |
212 | ||
213 | /* | |
214 | * DFP VDO (PD Revision 3.0+ only) | |
215 | * -------- | |
216 | * <31:29> :: DFP VDO version | |
217 | * <28:27> :: Reserved | |
218 | * <26:24> :: Host capability | |
219 | * <23:22> :: Connector type (10b == receptacle, 11b == captive plug) | |
220 | * <21:5> :: Reserved | |
221 | * <4:0> :: Port number | |
222 | */ | |
223 | #define DFP_VDO_VER1_1 1 | |
9257bd80 KT |
224 | #define HOST_USB2_CAPABLE (1 << 0) |
225 | #define HOST_USB3_CAPABLE (1 << 1) | |
226 | #define HOST_USB4_CAPABLE (1 << 2) | |
630dce28 KT |
227 | #define DFP_RECEPTACLE 2 |
228 | #define DFP_CAPTIVE 3 | |
229 | ||
230 | #define VDO_DFP(ver, cap, conn, pnum) \ | |
231 | (((ver) & 0x7) << 29 | ((cap) & 0x7) << 24 | ((conn) & 0x3) << 22 \ | |
232 | | ((pnum) & 0x1f)) | |
233 | ||
234 | /* | |
55b54c26 KT |
235 | * Cable VDO (for both Passive and Active Cable VDO in PD Rev2.0) |
236 | * --------- | |
237 | * <31:28> :: Cable HW version | |
238 | * <27:24> :: Cable FW version | |
239 | * <23:20> :: Reserved, Shall be set to zero | |
240 | * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive) | |
241 | * <17> :: Reserved, Shall be set to zero | |
242 | * <16:13> :: cable latency (0001 == <10ns(~1m length)) | |
243 | * <12:11> :: cable termination type (11b == both ends active VCONN req) | |
244 | * <10> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) | |
245 | * <9> :: SSTX2 Directionality support | |
246 | * <8> :: SSRX1 Directionality support | |
247 | * <7> :: SSRX2 Directionality support | |
248 | * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) | |
249 | * <4> :: Vbus through cable (0b == no, 1b == yes) | |
250 | * <3> :: SOP" controller present? (0b == no, 1b == yes) | |
251 | * <2:0> :: USB SS Signaling support | |
252 | * | |
253 | * Passive Cable VDO (PD Rev3.0+) | |
630dce28 KT |
254 | * --------- |
255 | * <31:28> :: Cable HW version | |
256 | * <27:24> :: Cable FW version | |
257 | * <23:21> :: VDO version | |
258 | * <20> :: Reserved, Shall be set to zero | |
259 | * <19:18> :: Type-C to Type-C/Captive (10b == C, 11b == Captive) | |
260 | * <17> :: Reserved, Shall be set to zero | |
261 | * <16:13> :: cable latency (0001 == <10ns(~1m length)) | |
262 | * <12:11> :: cable termination type (10b == Vconn not req, 01b == Vconn req) | |
263 | * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) | |
264 | * <8:7> :: Reserved, Shall be set to zero | |
265 | * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) | |
266 | * <4:3> :: Reserved, Shall be set to zero | |
267 | * <2:0> :: USB highest speed | |
268 | * | |
55b54c26 | 269 | * Active Cable VDO 1 (PD Rev3.0+) |
630dce28 KT |
270 | * --------- |
271 | * <31:28> :: Cable HW version | |
272 | * <27:24> :: Cable FW version | |
273 | * <23:21> :: VDO version | |
274 | * <20> :: Reserved, Shall be set to zero | |
275 | * <19:18> :: Connector type (10b == C, 11b == Captive) | |
276 | * <17> :: Reserved, Shall be set to zero | |
277 | * <16:13> :: cable latency (0001 == <10ns(~1m length)) | |
278 | * <12:11> :: cable termination type (10b == one end active, 11b == both ends active VCONN req) | |
279 | * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) | |
280 | * <8> :: SBU supported (0b == supported, 1b == not supported) | |
281 | * <7> :: SBU type (0b == passive, 1b == active) | |
282 | * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A) | |
283 | * <4> :: Vbus through cable (0b == no, 1b == yes) | |
284 | * <3> :: SOP" controller present? (0b == no, 1b == yes) | |
285 | * <2:0> :: USB highest speed | |
286 | */ | |
287 | /* Cable VDO Version */ | |
288 | #define CABLE_VDO_VER1_0 0 | |
289 | #define CABLE_VDO_VER1_3 3 | |
290 | ||
55b54c26 KT |
291 | /* Connector Type (_ATYPE and _BTYPE are for PD Rev2.0 only) */ |
292 | #define CABLE_ATYPE 0 | |
293 | #define CABLE_BTYPE 1 | |
630dce28 KT |
294 | #define CABLE_CTYPE 2 |
295 | #define CABLE_CAPTIVE 3 | |
296 | ||
297 | /* Cable Latency */ | |
298 | #define CABLE_LATENCY_1M 1 | |
299 | #define CABLE_LATENCY_2M 2 | |
300 | #define CABLE_LATENCY_3M 3 | |
301 | #define CABLE_LATENCY_4M 4 | |
302 | #define CABLE_LATENCY_5M 5 | |
303 | #define CABLE_LATENCY_6M 6 | |
304 | #define CABLE_LATENCY_7M 7 | |
305 | #define CABLE_LATENCY_7M_PLUS 8 | |
306 | ||
307 | /* Cable Termination Type */ | |
308 | #define PCABLE_VCONN_NOT_REQ 0 | |
309 | #define PCABLE_VCONN_REQ 1 | |
310 | #define ACABLE_ONE_END 2 | |
311 | #define ACABLE_BOTH_END 3 | |
312 | ||
313 | /* Maximum Vbus Voltage */ | |
314 | #define CABLE_MAX_VBUS_20V 0 | |
315 | #define CABLE_MAX_VBUS_30V 1 | |
316 | #define CABLE_MAX_VBUS_40V 2 | |
317 | #define CABLE_MAX_VBUS_50V 3 | |
318 | ||
319 | /* Active Cable SBU Supported/Type */ | |
320 | #define ACABLE_SBU_SUPP 0 | |
321 | #define ACABLE_SBU_NOT_SUPP 1 | |
322 | #define ACABLE_SBU_PASSIVE 0 | |
323 | #define ACABLE_SBU_ACTIVE 1 | |
324 | ||
325 | /* Vbus Current Handling Capability */ | |
326 | #define CABLE_CURR_DEF 0 | |
327 | #define CABLE_CURR_3A 1 | |
328 | #define CABLE_CURR_5A 2 | |
329 | ||
55b54c26 KT |
330 | /* USB SuperSpeed Signaling Support (PD Rev2.0) */ |
331 | #define CABLE_USBSS_U2_ONLY 0 | |
332 | #define CABLE_USBSS_U31_GEN1 1 | |
333 | #define CABLE_USBSS_U31_GEN2 2 | |
334 | ||
630dce28 KT |
335 | /* USB Highest Speed */ |
336 | #define CABLE_USB2_ONLY 0 | |
337 | #define CABLE_USB32_GEN1 1 | |
338 | #define CABLE_USB32_4_GEN2 2 | |
339 | #define CABLE_USB4_GEN3 3 | |
340 | ||
55b54c26 KT |
341 | #define VDO_CABLE(hw, fw, cbl, lat, term, tx1d, tx2d, rx1d, rx2d, cur, vps, sopp, usbss) \ |
342 | (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18 \ | |
343 | | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 | (tx1d) << 10 \ | |
344 | | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 | ((cur) & 0x3) << 5 \ | |
345 | | (vps) << 4 | (sopp) << 3 | ((usbss) & 0x7)) | |
630dce28 KT |
346 | #define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd) \ |
347 | (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ | |
348 | | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \ | |
349 | | ((vbm) & 0x3) << 9 | ((cur) & 0x3) << 5 | ((spd) & 0x7)) | |
350 | #define VDO_ACABLE1(hw, fw, ver, conn, lat, term, vbm, sbu, sbut, cur, vbt, sopp, spd) \ | |
351 | (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ | |
352 | | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11 \ | |
353 | | ((vbm) & 0x3) << 9 | (sbu) << 8 | (sbut) << 7 | ((cur) & 0x3) << 5 \ | |
354 | | (vbt) << 4 | (sopp) << 3 | ((spd) & 0x7)) | |
355 | ||
356 | /* | |
357 | * Active Cable VDO 2 | |
358 | * --------- | |
359 | * <31:24> :: Maximum operating temperature | |
360 | * <23:16> :: Shutdown temperature | |
361 | * <15> :: Reserved, Shall be set to zero | |
362 | * <14:12> :: U3/CLd power | |
363 | * <11> :: U3 to U0 transition mode (0b == direct, 1b == through U3S) | |
364 | * <10> :: Physical connection (0b == copper, 1b == optical) | |
365 | * <9> :: Active element (0b == redriver, 1b == retimer) | |
366 | * <8> :: USB4 supported (0b == yes, 1b == no) | |
367 | * <7:6> :: USB2 hub hops consumed | |
368 | * <5> :: USB2 supported (0b == yes, 1b == no) | |
369 | * <4> :: USB3.2 supported (0b == yes, 1b == no) | |
370 | * <3> :: USB lanes supported (0b == one lane, 1b == two lanes) | |
371 | * <2> :: Optically isolated active cable (0b == no, 1b == yes) | |
372 | * <1> :: Reserved, Shall be set to zero | |
373 | * <0> :: USB gen (0b == gen1, 1b == gen2+) | |
374 | */ | |
375 | /* U3/CLd Power*/ | |
376 | #define ACAB2_U3_CLD_10MW_PLUS 0 | |
377 | #define ACAB2_U3_CLD_10MW 1 | |
378 | #define ACAB2_U3_CLD_5MW 2 | |
379 | #define ACAB2_U3_CLD_1MW 3 | |
380 | #define ACAB2_U3_CLD_500UW 4 | |
381 | #define ACAB2_U3_CLD_200UW 5 | |
382 | #define ACAB2_U3_CLD_50UW 6 | |
383 | ||
384 | /* Other Active Cable VDO 2 Fields */ | |
385 | #define ACAB2_U3U0_DIRECT 0 | |
386 | #define ACAB2_U3U0_U3S 1 | |
387 | #define ACAB2_PHY_COPPER 0 | |
388 | #define ACAB2_PHY_OPTICAL 1 | |
389 | #define ACAB2_REDRIVER 0 | |
390 | #define ACAB2_RETIMER 1 | |
391 | #define ACAB2_USB4_SUPP 0 | |
392 | #define ACAB2_USB4_NOT_SUPP 1 | |
393 | #define ACAB2_USB2_SUPP 0 | |
394 | #define ACAB2_USB2_NOT_SUPP 1 | |
395 | #define ACAB2_USB32_SUPP 0 | |
396 | #define ACAB2_USB32_NOT_SUPP 1 | |
397 | #define ACAB2_LANES_ONE 0 | |
398 | #define ACAB2_LANES_TWO 1 | |
399 | #define ACAB2_OPT_ISO_NO 0 | |
400 | #define ACAB2_OPT_ISO_YES 1 | |
401 | #define ACAB2_GEN_1 0 | |
402 | #define ACAB2_GEN_2_PLUS 1 | |
403 | ||
404 | #define VDO_ACABLE2(mtemp, stemp, u3p, trans, phy, ele, u4, hops, u2, u32, lane, iso, gen) \ | |
405 | (((mtemp) & 0xff) << 24 | ((stemp) & 0xff) << 16 | ((u3p) & 0x7) << 12 \ | |
406 | | (trans) << 11 | (phy) << 10 | (ele) << 9 | (u4) << 8 \ | |
407 | | ((hops) & 0x3) << 6 | (u2) << 5 | (u32) << 4 | (lane) << 3 \ | |
408 | | (iso) << 2 | (gen)) | |
409 | ||
55b54c26 KT |
410 | /* |
411 | * AMA VDO (PD Rev2.0) | |
412 | * --------- | |
413 | * <31:28> :: Cable HW version | |
414 | * <27:24> :: Cable FW version | |
415 | * <23:12> :: Reserved, Shall be set to zero | |
416 | * <11> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) | |
417 | * <10> :: SSTX2 Directionality support | |
418 | * <9> :: SSRX1 Directionality support | |
419 | * <8> :: SSRX2 Directionality support | |
420 | * <7:5> :: Vconn power | |
421 | * <4> :: Vconn power required | |
422 | * <3> :: Vbus power required | |
423 | * <2:0> :: USB SS Signaling support | |
424 | */ | |
425 | #define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \ | |
426 | (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 \ | |
427 | | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8 \ | |
428 | | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3 \ | |
429 | | ((usbss) & 0x7)) | |
430 | ||
431 | #define PD_VDO_AMA_VCONN_REQ(vdo) (((vdo) >> 4) & 1) | |
432 | #define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo) >> 3) & 1) | |
433 | ||
434 | #define AMA_USBSS_U2_ONLY 0 | |
435 | #define AMA_USBSS_U31_GEN1 1 | |
436 | #define AMA_USBSS_U31_GEN2 2 | |
437 | #define AMA_USBSS_BBONLY 3 | |
438 | ||
630dce28 KT |
439 | /* |
440 | * VPD VDO | |
441 | * --------- | |
442 | * <31:28> :: HW version | |
443 | * <27:24> :: FW version | |
444 | * <23:21> :: VDO version | |
445 | * <20:17> :: Reserved, Shall be set to zero | |
446 | * <16:15> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V) | |
447 | * <14> :: Charge through current support (0b == 3A, 1b == 5A) | |
448 | * <13> :: Reserved, Shall be set to zero | |
449 | * <12:7> :: Vbus impedance | |
450 | * <6:1> :: Ground impedance | |
451 | * <0> :: Charge through support (0b == no, 1b == yes) | |
452 | */ | |
453 | #define VPD_VDO_VER1_0 0 | |
454 | #define VPD_MAX_VBUS_20V 0 | |
455 | #define VPD_MAX_VBUS_30V 1 | |
456 | #define VPD_MAX_VBUS_40V 2 | |
457 | #define VPD_MAX_VBUS_50V 3 | |
458 | #define VPDCT_CURR_3A 0 | |
459 | #define VPDCT_CURR_5A 1 | |
460 | #define VPDCT_NOT_SUPP 0 | |
461 | #define VPDCT_SUPP 1 | |
462 | ||
463 | #define VDO_VPD(hw, fw, ver, vbm, curr, vbi, gi, ct) \ | |
464 | (((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21 \ | |
465 | | ((vbm) & 0x3) << 15 | (curr) << 14 | ((vbi) & 0x3f) << 7 \ | |
466 | | ((gi) & 0x3f) << 1 | (ct)) | |
467 | ||
468 | #endif /* __DT_POWER_DELIVERY_H */ |