[linux-2.6-block.git] / include / asm-sparc / system.h

/* $Id: system.h,v 1.86 2001/10/30 04:57:10 davem Exp $ */
#include <linux/config.h>

#ifndef __SPARC_SYSTEM_H
#define __SPARC_SYSTEM_H

#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/threads.h>	/* NR_CPUS */
#include <linux/thread_info.h>

#include <asm/page.h>
#include <asm/psr.h>
#include <asm/ptrace.h>
#include <asm/btfixup.h>

#ifndef __ASSEMBLY__

/*
 * Sparc (general) CPU types
 */
enum sparc_cpu {
  sun4        = 0x00,
  sun4c       = 0x01,
  sun4m       = 0x02,
  sun4d       = 0x03,
  sun4e       = 0x04,
  sun4u       = 0x05, /* V8 ploos ploos */
  sun_unknown = 0x06,
  ap1000      = 0x07, /* almost a sun4m */
};

/* Really, userland should not be looking at any of this... */
#ifdef __KERNEL__

extern enum sparc_cpu sparc_cpu_model;

#ifndef CONFIG_SUN4
#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
#define ARCH_SUN4 0
#else
#define ARCH_SUN4C_SUN4 1
#define ARCH_SUN4 1
#endif

#define SUN4M_NCPUS            4              /* Architectural limit of sun4m. */

extern struct thread_info *current_set[NR_CPUS];

extern unsigned long empty_bad_page;
extern unsigned long empty_bad_page_table;
extern unsigned long empty_zero_page;

extern void sun_do_break(void);
extern int serial_console;
extern int stop_a_enabled;

static __inline__ int con_is_present(void)
{
	return serial_console ? 0 : 1;
}

/* When a context switch happens we must flush all user windows so that
 * the windows of the current process are flushed onto its stack. This
 * way the windows are all clean for the next process and the stack
 * frames are up to date.
 */
extern void flush_user_windows(void);
extern void kill_user_windows(void);
extern void synchronize_user_stack(void);
extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
		   void *fpqueue, unsigned long *fpqdepth);

#ifdef CONFIG_SMP
#define SWITCH_ENTER(prv) \
	do {			\
	if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \
		put_psr(get_psr() | PSR_EF); \
		fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \
		       &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \
		clear_tsk_thread_flag(prv, TIF_USEDFPU); \
		(prv)->thread.kregs->psr &= ~PSR_EF; \
	} \
	} while(0)

#define SWITCH_DO_LAZY_FPU(next)	/* */
#else
#define SWITCH_ENTER(prv)		/* */
#define SWITCH_DO_LAZY_FPU(nxt)	\
	do {			\
	if (last_task_used_math != (nxt))		\
		(nxt)->thread.kregs->psr&=~PSR_EF;	\
	} while(0)
#endif

/*
 * Flush windows so that the VM switch which follows
 * would not pull the stack from under us.
 *
 * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
 * XXX WTF is the above comment? Found in late teen 2.4.x.
 */
#define prepare_arch_switch(next) do { \
	__asm__ __volatile__( \
	".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \
	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
	"save %sp, -0x40, %sp\n\t" \
	"restore; restore; restore; restore; restore; restore; restore"); \
} while(0)

	/* Much care has gone into this code, do not touch it.
	 *
	 * We need to loadup regs l0/l1 for the newly forked child
	 * case because the trap return path relies on those registers
	 * holding certain values, gcc is told that they are clobbered.
	 * Gcc needs registers for 3 values in and 1 value out, so we
	 * clobber every non-fixed-usage register besides l2/l3/o4/o5.  -DaveM
	 *
	 * Hey Dave, that do not touch sign is too much of an incentive
	 * - Anton & Pete
	 */
#define switch_to(prev, next, last) do {						\
	SWITCH_ENTER(prev);								\
	SWITCH_DO_LAZY_FPU(next);							\
	cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask);			\
	__asm__ __volatile__(								\
	"sethi	%%hi(here - 0x8), %%o7\n\t"						\
	"mov	%%g6, %%g3\n\t"								\
	"or	%%o7, %%lo(here - 0x8), %%o7\n\t"					\
	"rd	%%psr, %%g4\n\t"							\
	"std	%%sp, [%%g6 + %4]\n\t"							\
	"rd	%%wim, %%g5\n\t"							\
	"wr	%%g4, 0x20, %%psr\n\t"							\
	"nop\n\t"									\
	"std	%%g4, [%%g6 + %3]\n\t"							\
	"ldd	[%2 + %3], %%g4\n\t"							\
	"mov	%2, %%g6\n\t"								\
	".globl	patchme_store_new_current\n"						\
"patchme_store_new_current:\n\t"							\
	"st	%2, [%1]\n\t"								\
	"wr	%%g4, 0x20, %%psr\n\t"							\
	"nop\n\t"									\
	"nop\n\t"									\
	"nop\n\t"	/* LEON needs all 3 nops: load to %sp depends on CWP. */		\
	"ldd	[%%g6 + %4], %%sp\n\t"							\
	"wr	%%g5, 0x0, %%wim\n\t"							\
	"ldd	[%%sp + 0x00], %%l0\n\t"						\
	"ldd	[%%sp + 0x38], %%i6\n\t"						\
	"wr	%%g4, 0x0, %%psr\n\t"							\
	"nop\n\t"									\
	"nop\n\t"									\
	"jmpl	%%o7 + 0x8, %%g0\n\t"							\
	" ld	[%%g3 + %5], %0\n\t"							\
	"here:\n"									\
        : "=&r" (last)									\
        : "r" (&(current_set[hard_smp_processor_id()])),	\
	  "r" (task_thread_info(next)),				\
	  "i" (TI_KPSR),					\
	  "i" (TI_KSP),						\
	  "i" (TI_TASK)						\
	:       "g1", "g2", "g3", "g4", "g5",       "g7",	\
	  "l0", "l1",       "l3", "l4", "l5", "l6", "l7",	\
	  "i0", "i1", "i2", "i3", "i4", "i5",			\
	  "o0", "o1", "o2", "o3",                   "o7");	\
	} while(0)

/*
 * On SMP systems, when the scheduler does migration-cost autodetection,
 * it needs a way to flush as much of the CPU's caches as possible.
 *
 * TODO: fill this in!
 */
static inline void sched_cacheflush(void)
{
}

/*
 * Changing the IRQ level on the Sparc.
 */
extern void local_irq_restore(unsigned long);
extern unsigned long __local_irq_save(void);
extern void local_irq_enable(void);

static inline unsigned long getipl(void)
{
	unsigned long retval;

	__asm__ __volatile__("rd	%%psr, %0" : "=r" (retval));
	return retval;
}

#define local_save_flags(flags)	((flags) = getipl())
#define local_irq_save(flags)	((flags) = __local_irq_save())
#define local_irq_disable()	((void) __local_irq_save())
#define irqs_disabled()		((getipl() & PSR_PIL) != 0)

/* XXX Change this if we ever use a PSO mode kernel. */
#define mb()	__asm__ __volatile__ ("" : : : "memory")
#define rmb()	mb()
#define wmb()	mb()
#define read_barrier_depends()	do { } while(0)
#define set_mb(__var, __value)  do { __var = __value; mb(); } while(0)
#define set_wmb(__var, __value) set_mb(__var, __value)
#define smp_mb()	__asm__ __volatile__("":::"memory")
#define smp_rmb()	__asm__ __volatile__("":::"memory")
#define smp_wmb()	__asm__ __volatile__("":::"memory")
#define smp_read_barrier_depends()	do { } while(0)

#define nop() __asm__ __volatile__ ("nop")

/* This has special calling conventions */
#ifndef CONFIG_SMP
BTFIXUPDEF_CALL(void, ___xchg32, void)
#endif

static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
{
#ifdef CONFIG_SMP
	__asm__ __volatile__("swap [%2], %0"
			     : "=&r" (val)
			     : "0" (val), "r" (m)
			     : "memory");
	return val;
#else
	register unsigned long *ptr asm("g1");
	register unsigned long ret asm("g2");

	ptr = (unsigned long *) m;
	ret = val;

	/* Note: this is magic and the nop there is
	   really needed. */
	__asm__ __volatile__(
	"mov	%%o7, %%g4\n\t"
	"call	___f____xchg32\n\t"
	" nop\n\t"
	: "=&r" (ret)
	: "0" (ret), "r" (ptr)
	: "g3", "g4", "g7", "memory", "cc");

	return ret;
#endif
}

#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
#define tas(ptr) (xchg((ptr),1))

extern void __xchg_called_with_bad_pointer(void);

static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
{
	switch (size) {
	case 4:
		return xchg_u32(ptr, x);
	};
	__xchg_called_with_bad_pointer();
	return x;
}

extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));

#endif /* __KERNEL__ */

#endif /* __ASSEMBLY__ */

#define arch_align_stack(x) (x)

#endif /* !(__SPARC_SYSTEM_H) */
Commit	Line	Data
1da177e4 LT	1	/* $Id: system.h,v 1.86 2001/10/30 04:57:10 davem Exp $ */
	2	#include <linux/config.h>
	3
	4	#ifndef __SPARC_SYSTEM_H
	5	#define __SPARC_SYSTEM_H
	6
	7	#include <linux/config.h>
	8	#include <linux/kernel.h>
	9	#include <linux/threads.h> /* NR_CPUS */
	10	#include <linux/thread_info.h>
	11
1da177e4 LT	12	#include <asm/page.h>
	13	#include <asm/psr.h>
	14	#include <asm/ptrace.h>
	15	#include <asm/btfixup.h>
	16
	17	#ifndef __ASSEMBLY__
	18
	19	/*
	20	* Sparc (general) CPU types
	21	*/
	22	enum sparc_cpu {
	23	sun4 = 0x00,
	24	sun4c = 0x01,
	25	sun4m = 0x02,
	26	sun4d = 0x03,
	27	sun4e = 0x04,
	28	sun4u = 0x05, /* V8 ploos ploos */
	29	sun_unknown = 0x06,
	30	ap1000 = 0x07, /* almost a sun4m */
	31	};
	32
	33	/* Really, userland should not be looking at any of this... */
	34	#ifdef __KERNEL__
	35
	36	extern enum sparc_cpu sparc_cpu_model;
	37
	38	#ifndef CONFIG_SUN4
	39	#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
	40	#define ARCH_SUN4 0
	41	#else
	42	#define ARCH_SUN4C_SUN4 1
	43	#define ARCH_SUN4 1
	44	#endif
	45
	46	#define SUN4M_NCPUS 4 /* Architectural limit of sun4m. */
	47
	48	extern struct thread_info *current_set[NR_CPUS];
	49
	50	extern unsigned long empty_bad_page;
	51	extern unsigned long empty_bad_page_table;
	52	extern unsigned long empty_zero_page;
	53
	54	extern void sun_do_break(void);
	55	extern int serial_console;
	56	extern int stop_a_enabled;
	57
	58	static __inline__ int con_is_present(void)
	59	{
	60	return serial_console ? 0 : 1;
	61	}
	62
	63	/* When a context switch happens we must flush all user windows so that
	64	* the windows of the current process are flushed onto its stack. This
	65	* way the windows are all clean for the next process and the stack
	66	* frames are up to date.
	67	*/
	68	extern void flush_user_windows(void);
	69	extern void kill_user_windows(void);
	70	extern void synchronize_user_stack(void);
	71	extern void fpsave(unsigned long fpregs, unsigned long fsr,
	72	void fpqueue, unsigned long fpqdepth);
	73
	74	#ifdef CONFIG_SMP
	75	#define SWITCH_ENTER(prv) \
76	do { \
77	if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \
78	put_psr(get_psr() \| PSR_EF); \
79	fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \
80	&(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \
81	clear_tsk_thread_flag(prv, TIF_USEDFPU); \
82	(prv)->thread.kregs->psr &= ~PSR_EF; \
83	} \
84	} while(0)
85
86	#define SWITCH_DO_LAZY_FPU(next) /* */
87	#else
88	#define SWITCH_ENTER(prv) /* */
89	#define SWITCH_DO_LAZY_FPU(nxt) \
90	do { \
91	if (last_task_used_math != (nxt)) \
92	(nxt)->thread.kregs->psr&=~PSR_EF; \
93	} while(0)
94	#endif
95
96	/*
97	* Flush windows so that the VM switch which follows
98	* would not pull the stack from under us.
99	*
100	* SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
101	* XXX WTF is the above comment? Found in late teen 2.4.x.
102	*/
4866cde0	103	#define prepare_arch_switch(next) do { \
1da177e4 LT	104	__asm__ __volatile__( \
	105	".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \
	106	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
	107	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
	108	"save %sp, -0x40, %sp\n\t" \
	109	"restore; restore; restore; restore; restore; restore; restore"); \
	110	} while(0)
1da177e4 LT	111
	112	/* Much care has gone into this code, do not touch it.
	113	*
	114	* We need to loadup regs l0/l1 for the newly forked child
	115	* case because the trap return path relies on those registers
	116	* holding certain values, gcc is told that they are clobbered.
	117	* Gcc needs registers for 3 values in and 1 value out, so we
	118	* clobber every non-fixed-usage register besides l2/l3/o4/o5. -DaveM
	119	*
	120	* Hey Dave, that do not touch sign is too much of an incentive
	121	* - Anton & Pete
	122	*/
	123	#define switch_to(prev, next, last) do { \
	124	SWITCH_ENTER(prev); \
	125	SWITCH_DO_LAZY_FPU(next); \
	126	cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask); \
	127	__asm__ __volatile__( \
	128	"sethi %%hi(here - 0x8), %%o7\n\t" \
	129	"mov %%g6, %%g3\n\t" \
	130	"or %%o7, %%lo(here - 0x8), %%o7\n\t" \
	131	"rd %%psr, %%g4\n\t" \
	132	"std %%sp, [%%g6 + %4]\n\t" \
	133	"rd %%wim, %%g5\n\t" \
	134	"wr %%g4, 0x20, %%psr\n\t" \
	135	"nop\n\t" \
	136	"std %%g4, [%%g6 + %3]\n\t" \
	137	"ldd [%2 + %3], %%g4\n\t" \
	138	"mov %2, %%g6\n\t" \
	139	".globl patchme_store_new_current\n" \
	140	"patchme_store_new_current:\n\t" \
	141	"st %2, [%1]\n\t" \
	142	"wr %%g4, 0x20, %%psr\n\t" \
	143	"nop\n\t" \
	144	"nop\n\t" \
	145	"nop\n\t" /* LEON needs all 3 nops: load to %sp depends on CWP. */ \
	146	"ldd [%%g6 + %4], %%sp\n\t" \
	147	"wr %%g5, 0x0, %%wim\n\t" \
	148	"ldd [%%sp + 0x00], %%l0\n\t" \
	149	"ldd [%%sp + 0x38], %%i6\n\t" \
	150	"wr %%g4, 0x0, %%psr\n\t" \
	151	"nop\n\t" \
	152	"nop\n\t" \
	153	"jmpl %%o7 + 0x8, %%g0\n\t" \
	154	" ld [%%g3 + %5], %0\n\t" \
	155	"here:\n" \
	156	: "=&r" (last) \
	157	: "r" (&(current_set[hard_smp_processor_id()])), \
d562ef6a	158	"r" (task_thread_info(next)), \
1da177e4 LT	159	"i" (TI_KPSR), \
	160	"i" (TI_KSP), \
	161	"i" (TI_TASK) \
	162	: "g1", "g2", "g3", "g4", "g5", "g7", \
	163	"l0", "l1", "l3", "l4", "l5", "l6", "l7", \
	164	"i0", "i1", "i2", "i3", "i4", "i5", \
	165	"o0", "o1", "o2", "o3", "o7"); \
	166	} while(0)
	167
4dc7a0bb IM	168	/*
	169	* On SMP systems, when the scheduler does migration-cost autodetection,
	170	* it needs a way to flush as much of the CPU's caches as possible.
	171	*
	172	* TODO: fill this in!
	173	*/
	174	static inline void sched_cacheflush(void)
	175	{
	176	}
	177
1da177e4 LT	178	/*
	179	* Changing the IRQ level on the Sparc.
	180	*/
	181	extern void local_irq_restore(unsigned long);
	182	extern unsigned long __local_irq_save(void);
	183	extern void local_irq_enable(void);
	184
	185	static inline unsigned long getipl(void)
	186	{
	187	unsigned long retval;
	188
	189	__asm__ __volatile__("rd %%psr, %0" : "=r" (retval));
	190	return retval;
	191	}
	192
	193	#define local_save_flags(flags) ((flags) = getipl())
	194	#define local_irq_save(flags) ((flags) = __local_irq_save())
	195	#define local_irq_disable() ((void) __local_irq_save())
	196	#define irqs_disabled() ((getipl() & PSR_PIL) != 0)
	197
	198	/* XXX Change this if we ever use a PSO mode kernel. */
	199	#define mb() __asm__ __volatile__ ("" : : : "memory")
	200	#define rmb() mb()
	201	#define wmb() mb()
	202	#define read_barrier_depends() do { } while(0)
	203	#define set_mb(__var, __value) do { __var = __value; mb(); } while(0)
	204	#define set_wmb(__var, __value) set_mb(__var, __value)
	205	#define smp_mb() __asm__ __volatile__("":::"memory")
	206	#define smp_rmb() __asm__ __volatile__("":::"memory")
	207	#define smp_wmb() __asm__ __volatile__("":::"memory")
	208	#define smp_read_barrier_depends() do { } while(0)
	209
	210	#define nop() __asm__ __volatile__ ("nop")
	211
	212	/* This has special calling conventions */
	213	#ifndef CONFIG_SMP
	214	BTFIXUPDEF_CALL(void, ___xchg32, void)
	215	#endif
	216
3115624e	217	static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
1da177e4 LT	218	{
	219	#ifdef CONFIG_SMP
	220	__asm__ __volatile__("swap [%2], %0"
	221	: "=&r" (val)
	222	: "0" (val), "r" (m)
	223	: "memory");
	224	return val;
	225	#else
	226	register unsigned long *ptr asm("g1");
	227	register unsigned long ret asm("g2");
	228
	229	ptr = (unsigned long *) m;
	230	ret = val;
	231
	232	/* Note: this is magic and the nop there is
	233	really needed. */
	234	__asm__ __volatile__(
	235	"mov %%o7, %%g4\n\t"
	236	"call ___f____xchg32\n\t"
	237	" nop\n\t"
	238	: "=&r" (ret)
	239	: "0" (ret), "r" (ptr)
	240	: "g3", "g4", "g7", "memory", "cc");
	241
	242	return ret;
	243	#endif
	244	}
	245
	246	#define xchg(ptr,x) ((__typeof__((ptr)))__xchg((unsigned long)(x),(ptr),sizeof((ptr))))
	247	#define tas(ptr) (xchg((ptr),1))
	248
	249	extern void __xchg_called_with_bad_pointer(void);
	250
	251	static __inline__ unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
	252	{
	253	switch (size) {
	254	case 4:
	255	return xchg_u32(ptr, x);
	256	};
	257	__xchg_called_with_bad_pointer();
	258	return x;
	259	}
	260
	261	extern void die_if_kernel(char str, struct pt_regs regs) __attribute__ ((noreturn));
	262
	263	#endif /* __KERNEL__ */
	264
	265	#endif /* __ASSEMBLY__ */
	266
	267	#define arch_align_stack(x) (x)
	268
	269	#endif /* !(__SPARC_SYSTEM_H) */