Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Watchdog device configuration | |
3 | # | |
4 | ||
261259b2 | 5 | menuconfig WATCHDOG |
1da177e4 LT |
6 | bool "Watchdog Timer Support" |
7 | ---help--- | |
8 | If you say Y here (and to one of the following options) and create a | |
9 | character special file /dev/watchdog with major number 10 and minor | |
10 | number 130 using mknod ("man mknod"), you will get a watchdog, i.e.: | |
11 | subsequently opening the file and then failing to write to it for | |
12 | longer than 1 minute will result in rebooting the machine. This | |
13 | could be useful for a networked machine that needs to come back | |
e0845bf4 | 14 | on-line as fast as possible after a lock-up. There's both a watchdog |
1da177e4 LT |
15 | implementation entirely in software (which can sometimes fail to |
16 | reboot the machine) and a driver for hardware watchdog boards, which | |
17 | are more robust and can also keep track of the temperature inside | |
e403149c DH |
18 | your computer. For details, read |
19 | <file:Documentation/watchdog/watchdog-api.txt> in the kernel source. | |
1da177e4 LT |
20 | |
21 | The watchdog is usually used together with the watchdog daemon | |
22 | which is available from | |
23 | <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can | |
24 | also monitor NFS connections and can reboot the machine when the process | |
25 | table is full. | |
26 | ||
27 | If unsure, say N. | |
28 | ||
261259b2 JE |
29 | if WATCHDOG |
30 | ||
1da177e4 LT |
31 | config WATCHDOG_NOWAYOUT |
32 | bool "Disable watchdog shutdown on close" | |
1da177e4 LT |
33 | help |
34 | The default watchdog behaviour (which you get if you say N here) is | |
35 | to stop the timer if the process managing it closes the file | |
36 | /dev/watchdog. It's always remotely possible that this process might | |
37 | get killed. If you say Y here, the watchdog cannot be stopped once | |
38 | it has been started. | |
39 | ||
40 | # | |
41 | # General Watchdog drivers | |
42 | # | |
43 | ||
44 | comment "Watchdog Device Drivers" | |
1da177e4 | 45 | |
2621e2a1 | 46 | # Architecture Independent |
1da177e4 LT |
47 | |
48 | config SOFT_WATCHDOG | |
49 | tristate "Software watchdog" | |
1da177e4 LT |
50 | help |
51 | A software monitoring watchdog. This will fail to reboot your system | |
52 | from some situations that the hardware watchdog will recover | |
53 | from. Equally it's a lot cheaper to install. | |
54 | ||
55 | To compile this driver as a module, choose M here: the | |
56 | module will be called softdog. | |
57 | ||
502a0106 MB |
58 | config WM831X_WATCHDOG |
59 | tristate "WM831x watchdog" | |
60 | depends on MFD_WM831X | |
61 | help | |
62 | Support for the watchdog in the WM831x AudioPlus PMICs. When | |
63 | the watchdog triggers the system will be reset. | |
64 | ||
006948ba MB |
65 | config WM8350_WATCHDOG |
66 | tristate "WM8350 watchdog" | |
67 | depends on MFD_WM8350 | |
68 | help | |
69 | Support for the watchdog in the WM8350 AudioPlus PMIC. When | |
70 | the watchdog triggers the system will be reset. | |
71 | ||
c0e962f9 WVS |
72 | # ALPHA Architecture |
73 | ||
1da177e4 LT |
74 | # ARM Architecture |
75 | ||
bdcff345 | 76 | config AT91RM9200_WATCHDOG |
853807fb | 77 | tristate "AT91RM9200 watchdog" |
261259b2 | 78 | depends on ARCH_AT91RM9200 |
853807fb AV |
79 | help |
80 | Watchdog timer embedded into AT91RM9200 chips. This will reboot your | |
81 | system when the timeout is reached. | |
82 | ||
e6bb42e3 | 83 | config AT91SAM9X_WATCHDOG |
f0e625c1 AV |
84 | tristate "AT91SAM9X / AT91CAP9 watchdog" |
85 | depends on ARCH_AT91 && !ARCH_AT91RM9200 | |
e6bb42e3 | 86 | help |
f0e625c1 AV |
87 | Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will |
88 | reboot your system when the timeout is reached. | |
e6bb42e3 | 89 | |
1da177e4 LT |
90 | config 21285_WATCHDOG |
91 | tristate "DC21285 watchdog" | |
261259b2 | 92 | depends on FOOTBRIDGE |
1da177e4 | 93 | help |
e0845bf4 | 94 | The Intel Footbridge chip contains a built-in watchdog circuit. Say Y |
1da177e4 LT |
95 | here if you wish to use this. Alternatively say M to compile the |
96 | driver as a module, which will be called wdt285. | |
97 | ||
98 | This driver does not work on all machines. In particular, early CATS | |
99 | boards have hardware problems that will cause the machine to simply | |
100 | lock up if the watchdog fires. | |
101 | ||
102 | "If in doubt, leave it out" - say N. | |
103 | ||
104 | config 977_WATCHDOG | |
105 | tristate "NetWinder WB83C977 watchdog" | |
261259b2 | 106 | depends on FOOTBRIDGE && ARCH_NETWINDER |
1da177e4 LT |
107 | help |
108 | Say Y here to include support for the WB977 watchdog included in | |
109 | NetWinder machines. Alternatively say M to compile the driver as | |
110 | a module, which will be called wdt977. | |
111 | ||
112 | Not sure? It's safe to say N. | |
113 | ||
180536f8 WVS |
114 | config IXP2000_WATCHDOG |
115 | tristate "IXP2000 Watchdog" | |
261259b2 | 116 | depends on ARCH_IXP2000 |
180536f8 WVS |
117 | help |
118 | Say Y here if to include support for the watchdog timer | |
119 | in the Intel IXP2000(2400, 2800, 2850) network processors. | |
120 | This driver can be built as a module by choosing M. The module | |
121 | will be called ixp2000_wdt. | |
122 | ||
123 | Say N if you are unsure. | |
124 | ||
1da177e4 LT |
125 | config IXP4XX_WATCHDOG |
126 | tristate "IXP4xx Watchdog" | |
261259b2 | 127 | depends on ARCH_IXP4XX |
1da177e4 LT |
128 | help |
129 | Say Y here if to include support for the watchdog timer | |
130 | in the Intel IXP4xx network processors. This driver can | |
131 | be built as a module by choosing M. The module will | |
132 | be called ixp4xx_wdt. | |
133 | ||
134 | Note: The internal IXP4xx watchdog does a soft CPU reset | |
135 | which doesn't reset any peripherals. There are circumstances | |
136 | where the watchdog will fail to reset the board correctly | |
137 | (e.g., if the boot ROM is in an unreadable state). | |
138 | ||
139 | Say N if you are unsure. | |
140 | ||
ccb8f430 AV |
141 | config KS8695_WATCHDOG |
142 | tristate "KS8695 watchdog" | |
143 | depends on ARCH_KS8695 | |
144 | help | |
145 | Watchdog timer embedded into KS8695 processor. This will reboot your | |
146 | system when the timeout is reached. | |
147 | ||
1da177e4 LT |
148 | config S3C2410_WATCHDOG |
149 | tristate "S3C2410 Watchdog" | |
261259b2 | 150 | depends on ARCH_S3C2410 |
1da177e4 LT |
151 | help |
152 | Watchdog timer block in the Samsung S3C2410 chips. This will | |
153 | reboot the system when the timer expires with the watchdog | |
154 | enabled. | |
155 | ||
156 | The driver is limited by the speed of the system's PCLK | |
2621e2a1 | 157 | signal, so with reasonably fast systems (PCLK around 50-66MHz) |
1da177e4 LT |
158 | then watchdog intervals of over approximately 20seconds are |
159 | unavailable. | |
160 | ||
161 | The driver can be built as a module by choosing M, and will | |
162 | be called s3c2410_wdt | |
163 | ||
164 | config SA1100_WATCHDOG | |
165 | tristate "SA1100/PXA2xx watchdog" | |
261259b2 | 166 | depends on ARCH_SA1100 || ARCH_PXA |
1da177e4 LT |
167 | help |
168 | Watchdog timer embedded into SA11x0 and PXA2xx chips. This will | |
169 | reboot your system when timeout is reached. | |
170 | ||
171 | NOTE: once enabled, this timer cannot be disabled. | |
172 | ||
173 | To compile this driver as a module, choose M here: the | |
174 | module will be called sa1100_wdt. | |
175 | ||
b9d36b85 RK |
176 | config MPCORE_WATCHDOG |
177 | tristate "MPcore watchdog" | |
261259b2 | 178 | depends on ARM_MPCORE_PLATFORM && LOCAL_TIMERS |
b9d36b85 RK |
179 | help |
180 | Watchdog timer embedded into the MPcore system. | |
181 | ||
182 | To compile this driver as a module, choose M here: the | |
183 | module will be called mpcore_wdt. | |
184 | ||
f52ac8fe AZ |
185 | config EP93XX_WATCHDOG |
186 | tristate "EP93xx Watchdog" | |
261259b2 | 187 | depends on ARCH_EP93XX |
f52ac8fe AZ |
188 | help |
189 | Say Y here if to include support for the watchdog timer | |
190 | embedded in the Cirrus Logic EP93xx family of devices. | |
191 | ||
192 | To compile this driver as a module, choose M here: the | |
193 | module will be called ep93xx_wdt. | |
194 | ||
7768a13c KS |
195 | config OMAP_WATCHDOG |
196 | tristate "OMAP Watchdog" | |
b7cfc9ca | 197 | depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX |
7768a13c | 198 | help |
b7cfc9ca RK |
199 | Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y' |
200 | here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer. | |
7768a13c | 201 | |
9325fa36 VW |
202 | config PNX4008_WATCHDOG |
203 | tristate "PNX4008 Watchdog" | |
261259b2 | 204 | depends on ARCH_PNX4008 |
9325fa36 VW |
205 | help |
206 | Say Y here if to include support for the watchdog timer | |
207 | in the PNX4008 processor. | |
208 | This driver can be built as a module by choosing M. The module | |
209 | will be called pnx4008_wdt. | |
210 | ||
211 | Say N if you are unsure. | |
212 | ||
70c14ff0 DW |
213 | config IOP_WATCHDOG |
214 | tristate "IOP Watchdog" | |
c0e962f9 | 215 | depends on PLAT_IOP |
70c14ff0 DW |
216 | select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X) |
217 | help | |
218 | Say Y here if to include support for the watchdog timer | |
219 | in the Intel IOP3XX & IOP13XX I/O Processors. This driver can | |
220 | be built as a module by choosing M. The module will | |
221 | be called iop_wdt. | |
222 | ||
223 | Note: The IOP13XX watchdog does an Internal Bus Reset which will | |
224 | affect both cores and the peripherals of the IOP. The ATU-X | |
225 | and/or ATUe configuration registers will remain intact, but if | |
226 | operating as an Root Complex and/or Central Resource, the PCI-X | |
227 | and/or PCIe busses will also be reset. THIS IS A VERY BIG HAMMER. | |
228 | ||
7d831bf5 VB |
229 | config DAVINCI_WATCHDOG |
230 | tristate "DaVinci watchdog" | |
c0e962f9 | 231 | depends on ARCH_DAVINCI |
7d831bf5 VB |
232 | help |
233 | Say Y here if to include support for the watchdog timer | |
234 | in the DaVinci DM644x/DM646x processors. | |
235 | To compile this driver as a module, choose M here: the | |
236 | module will be called davinci_wdt. | |
237 | ||
238 | NOTE: once enabled, this timer cannot be disabled. | |
239 | Say N if you are unsure. | |
240 | ||
3b937a7d NP |
241 | config ORION_WATCHDOG |
242 | tristate "Orion watchdog" | |
054bd3f0 | 243 | depends on ARCH_ORION5X || ARCH_KIRKWOOD |
22ac9232 SB |
244 | help |
245 | Say Y here if to include support for the watchdog timer | |
3b937a7d | 246 | in the Marvell Orion5x and Kirkwood ARM SoCs. |
22ac9232 | 247 | To compile this driver as a module, choose M here: the |
3b937a7d | 248 | module will be called orion_wdt. |
22ac9232 | 249 | |
01480701 LW |
250 | config COH901327_WATCHDOG |
251 | bool "ST-Ericsson COH 901 327 watchdog" | |
252 | depends on ARCH_U300 | |
253 | default y if MACH_U300 | |
254 | help | |
255 | Say Y here to include Watchdog timer support for the | |
256 | watchdog embedded into the ST-Ericsson U300 series platforms. | |
257 | This watchdog is used to reset the system and thus cannot be | |
258 | compiled as a module. | |
259 | ||
80e45b1e TK |
260 | config TWL4030_WATCHDOG |
261 | tristate "TWL4030 Watchdog" | |
262 | depends on TWL4030_CORE | |
263 | help | |
264 | Support for TI TWL4030 watchdog. Say 'Y' here to enable the | |
265 | watchdog timer support for TWL4030 chips. | |
266 | ||
accde168 | 267 | config STMP3XXX_WATCHDOG |
268 | tristate "Freescale STMP3XXX watchdog" | |
269 | depends on ARCH_STMP3XXX | |
270 | help | |
271 | Say Y here if to include support for the watchdog timer | |
272 | for the Sigmatel STMP37XX/378X SoC. | |
273 | To compile this driver as a module, choose M here: the | |
274 | module will be called stmp3xxx_wdt. | |
275 | ||
0400e313 WZ |
276 | config NUC900_WATCHDOG |
277 | tristate "Nuvoton NUC900 watchdog" | |
278 | depends on ARCH_W90X900 | |
279 | help | |
280 | Say Y here if to include support for the watchdog timer | |
281 | for the Nuvoton NUC900 series SoCs. | |
282 | To compile this driver as a module, choose M here: the | |
283 | module will be called nuc900_wdt. | |
284 | ||
38461c5c TR |
285 | config ADX_WATCHDOG |
286 | tristate "Avionic Design Xanthos watchdog" | |
287 | depends on ARCH_PXA_ADX | |
288 | help | |
289 | Say Y here if you want support for the watchdog timer on Avionic | |
290 | Design Xanthos boards. | |
291 | ||
a9cb3959 HCE |
292 | # AVR32 Architecture |
293 | ||
294 | config AT32AP700X_WDT | |
295 | tristate "AT32AP700x watchdog" | |
438ff3f3 | 296 | depends on CPU_AT32AP700X |
a9cb3959 HCE |
297 | help |
298 | Watchdog timer embedded into AT32AP700x devices. This will reboot | |
299 | your system when the timeout is reached. | |
300 | ||
c0e962f9 | 301 | # BLACKFIN Architecture |
1e6d320f BW |
302 | |
303 | config BFIN_WDT | |
304 | tristate "Blackfin On-Chip Watchdog Timer" | |
c0e962f9 | 305 | depends on BLACKFIN |
1e6d320f BW |
306 | ---help--- |
307 | If you say yes here you will get support for the Blackfin On-Chip | |
308 | Watchdog Timer. If you have one of these processors and wish to | |
309 | have watchdog support enabled, say Y, otherwise say N. | |
310 | ||
311 | To compile this driver as a module, choose M here: the | |
312 | module will be called bfin_wdt. | |
313 | ||
c0e962f9 WVS |
314 | # CRIS Architecture |
315 | ||
316 | # FRV Architecture | |
317 | ||
318 | # H8300 Architecture | |
319 | ||
1da177e4 LT |
320 | # X86 (i386 + ia64 + x86_64) Architecture |
321 | ||
322 | config ACQUIRE_WDT | |
323 | tristate "Acquire SBC Watchdog Timer" | |
261259b2 | 324 | depends on X86 |
1da177e4 LT |
325 | ---help--- |
326 | This is the driver for the hardware watchdog on Single Board | |
327 | Computers produced by Acquire Inc (and others). This watchdog | |
328 | simply watches your kernel to make sure it doesn't freeze, and if | |
329 | it does, it reboots your computer after a certain amount of time. | |
330 | ||
331 | To compile this driver as a module, choose M here: the | |
332 | module will be called acquirewdt. | |
333 | ||
334 | Most people will say N. | |
335 | ||
336 | config ADVANTECH_WDT | |
337 | tristate "Advantech SBC Watchdog Timer" | |
261259b2 | 338 | depends on X86 |
1da177e4 LT |
339 | help |
340 | If you are configuring a Linux kernel for the Advantech single-board | |
341 | computer, say `Y' here to support its built-in watchdog timer | |
342 | feature. More information can be found at | |
343 | <http://www.advantech.com.tw/products/> | |
344 | ||
345 | config ALIM1535_WDT | |
346 | tristate "ALi M1535 PMU Watchdog Timer" | |
261259b2 | 347 | depends on X86 && PCI |
1da177e4 LT |
348 | ---help--- |
349 | This is the driver for the hardware watchdog on the ALi M1535 PMU. | |
350 | ||
351 | To compile this driver as a module, choose M here: the | |
352 | module will be called alim1535_wdt. | |
353 | ||
354 | Most people will say N. | |
355 | ||
356 | config ALIM7101_WDT | |
357 | tristate "ALi M7101 PMU Computer Watchdog" | |
bdd87354 | 358 | depends on PCI |
1da177e4 LT |
359 | help |
360 | This is the driver for the hardware watchdog on the ALi M7101 PMU | |
bdd87354 AC |
361 | as used in the x86 Cobalt servers and also found in some |
362 | SPARC Netra servers too. | |
1da177e4 LT |
363 | |
364 | To compile this driver as a module, choose M here: the | |
365 | module will be called alim7101_wdt. | |
366 | ||
367 | Most people will say N. | |
368 | ||
0b36086b JC |
369 | config GEODE_WDT |
370 | tristate "AMD Geode CS5535/CS5536 Watchdog" | |
9b0fd114 | 371 | depends on CS5535_MFGPT |
0b36086b JC |
372 | help |
373 | This driver enables a watchdog capability built into the | |
374 | CS5535/CS5536 companion chips for the AMD Geode GX and LX | |
375 | processors. This watchdog watches your kernel to make sure | |
376 | it doesn't freeze, and if it does, it reboots your computer after | |
377 | a certain amount of time. | |
378 | ||
379 | You can compile this driver directly into the kernel, or use | |
380 | it as a module. The module will be called geodewdt. | |
381 | ||
1da177e4 LT |
382 | config SC520_WDT |
383 | tristate "AMD Elan SC520 processor Watchdog" | |
261259b2 | 384 | depends on X86 |
1da177e4 LT |
385 | help |
386 | This is the driver for the hardware watchdog built in to the | |
387 | AMD "Elan" SC520 microcomputer commonly used in embedded systems. | |
388 | This watchdog simply watches your kernel to make sure it doesn't | |
389 | freeze, and if it does, it reboots your computer after a certain | |
390 | amount of time. | |
391 | ||
392 | You can compile this driver directly into the kernel, or use | |
393 | it as a module. The module will be called sc520_wdt. | |
394 | ||
3a5f9000 DT |
395 | config SBC_FITPC2_WATCHDOG |
396 | tristate "Compulab SBC-FITPC2 watchdog" | |
397 | depends on X86 | |
398 | ---help--- | |
399 | This is the driver for the built-in watchdog timer on the fit-PC2 | |
400 | Single-board computer made by Compulab. | |
401 | ||
402 | It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux. | |
403 | When "Watchdog Timer Value" enabled one can set 31-255 s operational range. | |
404 | ||
405 | Entering BIOS setup temporary disables watchdog operation regardless to current state, | |
406 | so system will not be restarted while user in BIOS setup. | |
407 | ||
408 | Once watchdog was enabled the system will be restarted every | |
409 | "Watchdog Timer Value" period, so to prevent it user can restart or | |
410 | disable the watchdog. | |
411 | ||
412 | To compile this driver as a module, choose M here: the | |
413 | module will be called sbc_fitpc2_wdt. | |
414 | ||
415 | Most people will say N. | |
416 | ||
1da177e4 LT |
417 | config EUROTECH_WDT |
418 | tristate "Eurotech CPU-1220/1410 Watchdog Timer" | |
261259b2 | 419 | depends on X86 |
1da177e4 LT |
420 | help |
421 | Enable support for the watchdog timer on the Eurotech CPU-1220 and | |
422 | CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product | |
423 | information are at <http://www.eurotech.it/>. | |
424 | ||
425 | config IB700_WDT | |
426 | tristate "IB700 SBC Watchdog Timer" | |
261259b2 | 427 | depends on X86 |
1da177e4 LT |
428 | ---help--- |
429 | This is the driver for the hardware watchdog on the IB700 Single | |
430 | Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog | |
431 | simply watches your kernel to make sure it doesn't freeze, and if | |
432 | it does, it reboots your computer after a certain amount of time. | |
433 | ||
434 | This driver is like the WDT501 driver but for slightly different hardware. | |
435 | ||
436 | To compile this driver as a module, choose M here: the | |
437 | module will be called ib700wdt. | |
438 | ||
439 | Most people will say N. | |
440 | ||
d532134d | 441 | config IBMASR |
c310e2b9 | 442 | tristate "IBM Automatic Server Restart" |
261259b2 | 443 | depends on X86 |
c310e2b9 | 444 | help |
d532134d | 445 | This is the driver for the IBM Automatic Server Restart watchdog |
e0845bf4 | 446 | timer built-in into some eServer xSeries machines. |
d532134d AP |
447 | |
448 | To compile this driver as a module, choose M here: the | |
449 | module will be called ibmasr. | |
450 | ||
1da177e4 | 451 | config WAFER_WDT |
01ed08c1 | 452 | tristate "ICP Single Board Computer Watchdog Timer" |
261259b2 | 453 | depends on X86 |
1da177e4 | 454 | help |
01ed08c1 VS |
455 | This is a driver for the hardware watchdog on the ICP Single |
456 | Board Computer. This driver is working on (at least) the following | |
457 | IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782. | |
1da177e4 LT |
458 | |
459 | To compile this driver as a module, choose M here: the | |
460 | module will be called wafer5823wdt. | |
461 | ||
cc90ef0f DH |
462 | config I6300ESB_WDT |
463 | tristate "Intel 6300ESB Timer/Watchdog" | |
261259b2 | 464 | depends on X86 && PCI |
cc90ef0f DH |
465 | ---help--- |
466 | Hardware driver for the watchdog timer built into the Intel | |
467 | 6300ESB controller hub. | |
468 | ||
469 | To compile this driver as a module, choose M here: the | |
470 | module will be called i6300esb. | |
471 | ||
9e0ea345 | 472 | config ITCO_WDT |
cbf40d3f | 473 | tristate "Intel TCO Timer/Watchdog" |
261259b2 | 474 | depends on (X86 || IA64) && PCI |
9e0ea345 WVS |
475 | ---help--- |
476 | Hardware driver for the intel TCO timer based watchdog devices. | |
477 | These drivers are included in the Intel 82801 I/O Controller | |
12d60e28 | 478 | Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB |
9e0ea345 WVS |
479 | controller hub. |
480 | ||
481 | The TCO (Total Cost of Ownership) timer is a watchdog timer | |
482 | that will reboot the machine after its second expiration. The | |
483 | expiration time can be configured with the "heartbeat" parameter. | |
484 | ||
485 | On some motherboards the driver may fail to reset the chipset's | |
486 | NO_REBOOT flag which prevents the watchdog from rebooting the | |
487 | machine. If this is the case you will get a kernel message like | |
488 | "failed to reset NO_REBOOT flag, reboot disabled by hardware". | |
489 | ||
490 | To compile this driver as a module, choose M here: the | |
491 | module will be called iTCO_wdt. | |
492 | ||
e033351d WVS |
493 | config ITCO_VENDOR_SUPPORT |
494 | bool "Intel TCO Timer/Watchdog Specific Vendor Support" | |
495 | depends on ITCO_WDT | |
496 | ---help--- | |
497 | Add vendor specific support to the intel TCO timer based watchdog | |
498 | devices. At this moment we only have additional support for some | |
499 | SuperMicro Inc. motherboards. | |
500 | ||
38ff6fd2 JBD |
501 | config IT8712F_WDT |
502 | tristate "IT8712F (Smart Guardian) Watchdog Timer" | |
503 | depends on X86 | |
504 | ---help--- | |
505 | This is the driver for the built-in watchdog timer on the IT8712F | |
506 | Super I/0 chipset used on many motherboards. | |
507 | ||
508 | To compile this driver as a module, choose M here: the | |
509 | module will be called it8712f_wdt. | |
510 | ||
e1fee94f OS |
511 | config IT87_WDT |
512 | tristate "IT87 Watchdog Timer" | |
513 | depends on X86 && EXPERIMENTAL | |
514 | ---help--- | |
515 | This is the driver for the hardware watchdog on the ITE IT8716, | |
516 | IT8718, IT8726, IT8712(Version J,K) Super I/O chips. This watchdog | |
517 | simply watches your kernel to make sure it doesn't freeze, and if | |
518 | it does, it reboots your computer after a certain amount of time. | |
519 | ||
520 | To compile this driver as a module, choose M here: the module will | |
521 | be called it87_wdt. | |
522 | ||
7f4da474 TM |
523 | config HP_WATCHDOG |
524 | tristate "HP Proliant iLO 2 Hardware Watchdog Timer" | |
525 | depends on X86 | |
526 | help | |
527 | A software monitoring watchdog and NMI sourcing driver. This driver | |
528 | will detect lockups and provide stack trace. Also, when an NMI | |
529 | occurs this driver will make the necessary BIOS calls to log | |
530 | the cause of the NMI. This is a driver that will only load on a | |
531 | HP ProLiant system with a minimum of iLO2 support. | |
532 | To compile this driver as a module, choose M here: the | |
533 | module will be called hpwdt. | |
534 | ||
1da177e4 LT |
535 | config SC1200_WDT |
536 | tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" | |
261259b2 | 537 | depends on X86 |
1da177e4 LT |
538 | help |
539 | This is a driver for National Semiconductor PC87307/PC97307 hardware | |
540 | watchdog cards as found on the SC1200. This watchdog is mainly used | |
541 | for power management purposes and can be used to power down the device | |
542 | during inactivity periods (includes interrupt activity monitoring). | |
543 | ||
544 | To compile this driver as a module, choose M here: the | |
545 | module will be called sc1200wdt. | |
546 | ||
547 | Most people will say N. | |
548 | ||
549 | config SCx200_WDT | |
550 | tristate "National Semiconductor SCx200 Watchdog" | |
261259b2 | 551 | depends on SCx200 && PCI |
1da177e4 LT |
552 | help |
553 | Enable the built-in watchdog timer support on the National | |
554 | Semiconductor SCx200 processors. | |
555 | ||
556 | If compiled as a module, it will be called scx200_wdt. | |
557 | ||
789fc0ad SAMJ |
558 | config PC87413_WDT |
559 | tristate "NS PC87413 watchdog" | |
261259b2 | 560 | depends on X86 |
789fc0ad SAMJ |
561 | ---help--- |
562 | This is the driver for the hardware watchdog on the PC87413 chipset | |
563 | This watchdog simply watches your kernel to make sure it doesn't | |
564 | freeze, and if it does, it reboots your computer after a certain | |
565 | amount of time. | |
566 | ||
567 | To compile this driver as a module, choose M here: the | |
568 | module will be called pc87413_wdt. | |
569 | ||
570 | Most people will say N. | |
7944d3a5 | 571 | |
b3e8f2c1 FF |
572 | config RDC321X_WDT |
573 | tristate "RDC R-321x SoC watchdog" | |
574 | depends on X86_RDC321X | |
575 | help | |
576 | This is the driver for the built in hardware watchdog | |
577 | in the RDC R-321x SoC. | |
578 | ||
579 | To compile this driver as a module, choose M here: the | |
580 | module will be called rdc321x_wdt. | |
581 | ||
1da177e4 LT |
582 | config 60XX_WDT |
583 | tristate "SBC-60XX Watchdog Timer" | |
261259b2 | 584 | depends on X86 |
1da177e4 LT |
585 | help |
586 | This driver can be used with the watchdog timer found on some | |
587 | single board computers, namely the 6010 PII based computer. | |
588 | It may well work with other cards. It reads port 0x443 to enable | |
589 | and re-set the watchdog timer, and reads port 0x45 to disable | |
590 | the watchdog. If you have a card that behave in similar ways, | |
591 | you can probably make this driver work with your card as well. | |
592 | ||
593 | You can compile this driver directly into the kernel, or use | |
594 | it as a module. The module will be called sbc60xxwdt. | |
595 | ||
3809ad38 IM |
596 | config SBC8360_WDT |
597 | tristate "SBC8360 Watchdog Timer" | |
261259b2 | 598 | depends on X86 |
3809ad38 IM |
599 | ---help--- |
600 | ||
601 | This is the driver for the hardware watchdog on the SBC8360 Single | |
602 | Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com). | |
603 | ||
604 | To compile this driver as a module, choose M here: the | |
4737f097 | 605 | module will be called sbc8360. |
3809ad38 IM |
606 | |
607 | Most people will say N. | |
608 | ||
c4c28335 GG |
609 | config SBC7240_WDT |
610 | tristate "SBC Nano 7240 Watchdog Timer" | |
611 | depends on X86_32 | |
612 | ---help--- | |
613 | This is the driver for the hardware watchdog found on the IEI | |
614 | single board computers EPIC Nano 7240 (and likely others). This | |
615 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
616 | and if it does, it reboots your computer after a certain amount of | |
617 | time. | |
618 | ||
619 | To compile this driver as a module, choose M here: the | |
620 | module will be called sbc7240_wdt. | |
621 | ||
1da177e4 LT |
622 | config CPU5_WDT |
623 | tristate "SMA CPU5 Watchdog" | |
261259b2 | 624 | depends on X86 |
1da177e4 LT |
625 | ---help--- |
626 | TBD. | |
627 | To compile this driver as a module, choose M here: the | |
628 | module will be called cpu5wdt. | |
629 | ||
4c6e63bd WVS |
630 | config SMSC_SCH311X_WDT |
631 | tristate "SMSC SCH311X Watchdog Timer" | |
632 | depends on X86 | |
633 | ---help--- | |
634 | This is the driver for the hardware watchdog timer on the | |
635 | SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset | |
636 | (LPC IO with 8042 KBC, Reset Generation, HWM and multiple | |
637 | serial ports). | |
638 | ||
639 | To compile this driver as a module, choose M here: the | |
640 | module will be called sch311x_wdt. | |
641 | ||
485ae77d SA |
642 | config SMSC37B787_WDT |
643 | tristate "Winbond SMsC37B787 Watchdog Timer" | |
261259b2 | 644 | depends on X86 |
485ae77d SA |
645 | ---help--- |
646 | This is the driver for the hardware watchdog component on the | |
647 | Winbond SMsC37B787 chipset as used on the NetRunner Mainboard | |
648 | from Vision Systems and maybe others. | |
649 | ||
650 | This watchdog simply watches your kernel to make sure it doesn't | |
651 | freeze, and if it does, it reboots your computer after a certain | |
652 | amount of time. | |
653 | ||
654 | Usually a userspace daemon will notify the kernel WDT driver that | |
655 | userspace is still alive, at regular intervals. | |
656 | ||
657 | To compile this driver as a module, choose M here: the | |
658 | module will be called smsc37b787_wdt. | |
659 | ||
660 | Most people will say N. | |
661 | ||
1da177e4 LT |
662 | config W83627HF_WDT |
663 | tristate "W83627HF Watchdog Timer" | |
261259b2 | 664 | depends on X86 |
1da177e4 LT |
665 | ---help--- |
666 | This is the driver for the hardware watchdog on the W83627HF chipset | |
667 | as used in Advantech PC-9578 and Tyan S2721-533 motherboards | |
668 | (and likely others). This watchdog simply watches your kernel to | |
669 | make sure it doesn't freeze, and if it does, it reboots your computer | |
670 | after a certain amount of time. | |
671 | ||
672 | To compile this driver as a module, choose M here: the | |
673 | module will be called w83627hf_wdt. | |
674 | ||
675 | Most people will say N. | |
676 | ||
f9a8c891 | 677 | config W83697HF_WDT |
ff02cfc7 | 678 | tristate "W83697HF/W83697HG Watchdog Timer" |
261259b2 | 679 | depends on X86 |
e0845bf4 | 680 | ---help--- |
ff02cfc7 ST |
681 | This is the driver for the hardware watchdog on the W83697HF/HG |
682 | chipset as used in Dedibox/VIA motherboards (and likely others). | |
683 | This watchdog simply watches your kernel to make sure it doesn't | |
684 | freeze, and if it does, it reboots your computer after a certain | |
685 | amount of time. | |
f9a8c891 | 686 | |
e0845bf4 WVS |
687 | To compile this driver as a module, choose M here: the |
688 | module will be called w83697hf_wdt. | |
f9a8c891 | 689 | |
e0845bf4 | 690 | Most people will say N. |
f9a8c891 | 691 | |
7d8b0906 FF |
692 | config W83697UG_WDT |
693 | tristate "W83697UG/W83697UF Watchdog Timer" | |
694 | depends on X86 | |
695 | ---help--- | |
696 | This is the driver for the hardware watchdog on the W83697UG/UF | |
697 | chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others). | |
698 | This watchdog simply watches your kernel to make sure it doesn't | |
699 | freeze, and if it does, it reboots your computer after a certain | |
700 | amount of time. | |
701 | ||
702 | To compile this driver as a module, choose M here: the | |
703 | module will be called w83697ug_wdt. | |
704 | ||
705 | Most people will say N. | |
706 | ||
1da177e4 LT |
707 | config W83877F_WDT |
708 | tristate "W83877F (EMACS) Watchdog Timer" | |
261259b2 | 709 | depends on X86 |
1da177e4 LT |
710 | ---help--- |
711 | This is the driver for the hardware watchdog on the W83877F chipset | |
712 | as used in EMACS PC-104 motherboards (and likely others). This | |
713 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
714 | and if it does, it reboots your computer after a certain amount of | |
715 | time. | |
716 | ||
717 | To compile this driver as a module, choose M here: the | |
718 | module will be called w83877f_wdt. | |
719 | ||
720 | Most people will say N. | |
721 | ||
b4cc4aa2 JMG |
722 | config W83977F_WDT |
723 | tristate "W83977F (PCM-5335) Watchdog Timer" | |
261259b2 | 724 | depends on X86 |
b4cc4aa2 JMG |
725 | ---help--- |
726 | This is the driver for the hardware watchdog on the W83977F I/O chip | |
727 | as used in AAEON's PCM-5335 SBC (and likely others). This | |
728 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
729 | and if it does, it reboots your computer after a certain amount of | |
730 | time. | |
731 | ||
732 | To compile this driver as a module, choose M here: the | |
733 | module will be called w83977f_wdt. | |
734 | ||
1da177e4 LT |
735 | config MACHZ_WDT |
736 | tristate "ZF MachZ Watchdog" | |
261259b2 | 737 | depends on X86 |
1da177e4 LT |
738 | ---help--- |
739 | If you are using a ZF Micro MachZ processor, say Y here, otherwise | |
e0845bf4 | 740 | N. This is the driver for the watchdog timer built-in on that |
1da177e4 LT |
741 | processor using ZF-Logic interface. This watchdog simply watches |
742 | your kernel to make sure it doesn't freeze, and if it does, it | |
743 | reboots your computer after a certain amount of time. | |
744 | ||
745 | To compile this driver as a module, choose M here: the | |
746 | module will be called machzwd. | |
747 | ||
eed6565f CC |
748 | config SBC_EPX_C3_WATCHDOG |
749 | tristate "Winsystems SBC EPX-C3 watchdog" | |
261259b2 | 750 | depends on X86 |
eed6565f CC |
751 | ---help--- |
752 | This is the driver for the built-in watchdog timer on the EPX-C3 | |
753 | Single-board computer made by Winsystems, Inc. | |
754 | ||
755 | *Note*: This hardware watchdog is not probeable and thus there | |
756 | is no way to know if writing to its IO address will corrupt | |
757 | your system or have any real effect. The only way to be sure | |
758 | that this driver does what you want is to make sure you | |
2621e2a1 | 759 | are running it on an EPX-C3 from Winsystems with the watchdog |
eed6565f CC |
760 | timer at IO address 0x1ee and 0x1ef. It will write to both those |
761 | IO ports. Basically, the assumption is made that if you compile | |
762 | this driver into your kernel and/or load it as a module, that you | |
763 | know what you are doing and that you are in fact running on an | |
764 | EPX-C3 board! | |
765 | ||
766 | To compile this driver as a module, choose M here: the | |
767 | module will be called sbc_epx_c3. | |
768 | ||
c0e962f9 | 769 | # M32R Architecture |
1da177e4 | 770 | |
c0e962f9 WVS |
771 | # M68K Architecture |
772 | ||
773 | # M68KNOMMU Architecture | |
774 | ||
775 | # MIPS Architecture | |
776 | ||
90074dce | 777 | config BCM47XX_WDT |
778 | tristate "Broadcom BCM47xx Watchdog Timer" | |
779 | depends on BCM47XX | |
780 | help | |
781 | Hardware driver for the Broadcom BCM47xx Watchog Timer. | |
782 | ||
03ec5856 FF |
783 | config RC32434_WDT |
784 | tristate "IDT RC32434 SoC Watchdog Timer" | |
785 | depends on MIKROTIK_RB532 | |
786 | help | |
787 | Hardware driver for the IDT RC32434 SoC built-in | |
788 | watchdog timer. | |
789 | ||
790 | To compile this driver as a module, choose M here: the | |
791 | module will be called rc32434_wdt. | |
792 | ||
c0e962f9 WVS |
793 | config INDYDOG |
794 | tristate "Indy/I2 Hardware Watchdog" | |
1ceea824 | 795 | depends on SGI_HAS_INDYDOG |
c0e962f9 WVS |
796 | help |
797 | Hardware driver for the Indy's/I2's watchdog. This is a | |
798 | watchdog timer that will reboot the machine after a 60 second | |
799 | timer expired and no process has written to /dev/watchdog during | |
800 | that time. | |
801 | ||
802 | config WDT_MTX1 | |
803 | tristate "MTX-1 Hardware Watchdog" | |
804 | depends on MIPS_MTX1 | |
805 | help | |
806 | Hardware driver for the MTX-1 boards. This is a watchdog timer that | |
807 | will reboot the machine after a 100 seconds timer expired. | |
808 | ||
33c050c5 DL |
809 | config PNX833X_WDT |
810 | tristate "PNX833x Hardware Watchdog" | |
811 | depends on SOC_PNX8335 | |
812 | help | |
813 | Hardware driver for the PNX833x's watchdog. This is a | |
814 | watchdog timer that will reboot the machine after a programable | |
815 | timer has expired and no process has written to /dev/watchdog during | |
816 | that time. | |
817 | ||
75c752e6 AS |
818 | config SIBYTE_WDOG |
819 | tristate "Sibyte SoC hardware watchdog" | |
820 | depends on CPU_SB1 | |
821 | help | |
822 | Watchdog driver for the built in watchdog hardware in Sibyte | |
823 | SoC processors. There are apparently two watchdog timers | |
824 | on such processors; this driver supports only the first one, | |
825 | because currently Linux only supports exporting one watchdog | |
826 | to userspace. | |
827 | ||
828 | To compile this driver as a loadable module, choose M here. | |
829 | The module will be called sb_wdog. | |
830 | ||
c283cf2c MC |
831 | config AR7_WDT |
832 | tristate "TI AR7 Watchdog Timer" | |
833 | depends on AR7 | |
834 | help | |
835 | Hardware driver for the TI AR7 Watchdog Timer. | |
836 | ||
6f702fce AN |
837 | config TXX9_WDT |
838 | tristate "Toshiba TXx9 Watchdog Timer" | |
839 | depends on CPU_TX39XX || CPU_TX49XX | |
840 | help | |
841 | Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. | |
842 | ||
c0e962f9 WVS |
843 | # PARISC Architecture |
844 | ||
845 | # POWERPC Architecture | |
1da177e4 | 846 | |
3268b561 MW |
847 | config GEF_WDT |
848 | tristate "GE Fanuc Watchdog Timer" | |
740d36ae | 849 | depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A |
3268b561 MW |
850 | ---help--- |
851 | Watchdog timer found in a number of GE Fanuc single board computers. | |
852 | ||
8cf18971 | 853 | config MPC5200_WDT |
6d535599 | 854 | bool "MPC52xx Watchdog Timer" |
8cf18971 | 855 | depends on PPC_MPC52xx |
6d535599 AD |
856 | help |
857 | Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog. | |
8cf18971 | 858 | |
28acd02f AV |
859 | config 8xxx_WDT |
860 | tristate "MPC8xxx Platform Watchdog Timer" | |
0d7b1014 | 861 | depends on PPC_8xx || PPC_83xx || PPC_86xx |
28acd02f AV |
862 | help |
863 | This driver is for a SoC level watchdog that exists on some | |
864 | Freescale PowerPC processors. So far this driver supports: | |
0d7b1014 | 865 | - MPC8xx watchdogs |
28acd02f AV |
866 | - MPC83xx watchdogs |
867 | - MPC86xx watchdogs | |
868 | ||
869 | For BookE processors (MPC85xx) use the BOOKE_WDT driver instead. | |
fabbfb9e | 870 | |
3be10211 JC |
871 | config MV64X60_WDT |
872 | tristate "MV64X60 (Marvell Discovery) Watchdog Timer" | |
261259b2 | 873 | depends on MV64X60 |
3be10211 | 874 | |
618efba9 SM |
875 | config PIKA_WDT |
876 | tristate "PIKA FPGA Watchdog" | |
877 | depends on WARP | |
878 | default y | |
879 | help | |
880 | This enables the watchdog in the PIKA FPGA. Currently used on | |
881 | the Warp platform. | |
882 | ||
a2f40ccd | 883 | config BOOKE_WDT |
34f6d749 | 884 | bool "PowerPC Book-E Watchdog Timer" |
261259b2 | 885 | depends on BOOKE || 4xx |
39cdc4bf KG |
886 | ---help--- |
887 | Please see Documentation/watchdog/watchdog-api.txt for | |
888 | more information. | |
a2f40ccd | 889 | |
180536f8 WVS |
890 | # PPC64 Architecture |
891 | ||
892 | config WATCHDOG_RTAS | |
893 | tristate "RTAS watchdog" | |
261259b2 | 894 | depends on PPC_RTAS |
180536f8 WVS |
895 | help |
896 | This driver adds watchdog support for the RTAS watchdog. | |
897 | ||
c310e2b9 | 898 | To compile this driver as a module, choose M here. The module |
180536f8 WVS |
899 | will be called wdrtas. |
900 | ||
1da177e4 LT |
901 | # S390 Architecture |
902 | ||
903 | config ZVM_WATCHDOG | |
904 | tristate "z/VM Watchdog Timer" | |
261259b2 | 905 | depends on S390 |
1da177e4 LT |
906 | help |
907 | IBM s/390 and zSeries machines running under z/VM 5.1 or later | |
908 | provide a virtual watchdog timer to their guest that cause a | |
909 | user define Control Program command to be executed after a | |
910 | timeout. | |
911 | ||
912 | To compile this driver as a module, choose M here. The module | |
913 | will be called vmwatchdog. | |
914 | ||
c0e962f9 | 915 | # SUPERH (sh + sh64) Architecture |
1da177e4 LT |
916 | |
917 | config SH_WDT | |
918 | tristate "SuperH Watchdog" | |
d0afa579 | 919 | depends on SUPERH && (CPU_SH3 || CPU_SH4) |
1da177e4 LT |
920 | help |
921 | This driver adds watchdog support for the integrated watchdog in the | |
922 | SuperH processors. If you have one of these processors and wish | |
923 | to have watchdog support enabled, say Y, otherwise say N. | |
924 | ||
925 | As a side note, saying Y here will automatically boost HZ to 1000 | |
926 | so that the timer has a chance to clear the overflow counter. On | |
927 | slower systems (such as the SH-2 and SH-3) this will likely yield | |
928 | some performance issues. As such, the WDT should be avoided here | |
929 | unless it is absolutely necessary. | |
930 | ||
931 | To compile this driver as a module, choose M here: the | |
932 | module will be called shwdt. | |
933 | ||
f118420b PM |
934 | config SH_WDT_MMAP |
935 | bool "Allow mmap of SH WDT" | |
936 | default n | |
937 | depends on SH_WDT | |
938 | help | |
939 | If you say Y here, user applications will be able to mmap the | |
940 | WDT/CPG registers. | |
cbf40d3f | 941 | |
c0e962f9 WVS |
942 | # SPARC Architecture |
943 | ||
1da177e4 LT |
944 | # SPARC64 Architecture |
945 | ||
946 | config WATCHDOG_CP1XXX | |
947 | tristate "CP1XXX Hardware Watchdog support" | |
261259b2 | 948 | depends on SPARC64 && PCI |
1da177e4 LT |
949 | ---help--- |
950 | This is the driver for the hardware watchdog timers present on | |
951 | Sun Microsystems CompactPCI models CP1400 and CP1500. | |
952 | ||
953 | To compile this driver as a module, choose M here: the | |
954 | module will be called cpwatchdog. | |
955 | ||
956 | If you do not have a CompactPCI model CP1400 or CP1500, or | |
957 | another UltraSPARC-IIi-cEngine boardset with hardware watchdog, | |
958 | you should say N to this option. | |
959 | ||
960 | config WATCHDOG_RIO | |
961 | tristate "RIO Hardware Watchdog support" | |
261259b2 | 962 | depends on SPARC64 && PCI |
1da177e4 LT |
963 | help |
964 | Say Y here to support the hardware watchdog capability on Sun RIO | |
965 | machines. The watchdog timeout period is normally one minute but | |
966 | can be changed with a boot-time parameter. | |
967 | ||
c0e962f9 WVS |
968 | # XTENSA Architecture |
969 | ||
1da177e4 LT |
970 | # |
971 | # ISA-based Watchdog Cards | |
972 | # | |
973 | ||
974 | comment "ISA-based Watchdog Cards" | |
261259b2 | 975 | depends on ISA |
1da177e4 LT |
976 | |
977 | config PCWATCHDOG | |
978 | tristate "Berkshire Products ISA-PC Watchdog" | |
261259b2 | 979 | depends on ISA |
1da177e4 LT |
980 | ---help--- |
981 | This is the driver for the Berkshire Products ISA-PC Watchdog card. | |
982 | This card simply watches your kernel to make sure it doesn't freeze, | |
983 | and if it does, it reboots your computer after a certain amount of | |
984 | time. This driver is like the WDT501 driver but for different | |
985 | hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC | |
986 | watchdog cards can be ordered from <http://www.berkprod.com/>. | |
987 | ||
988 | To compile this driver as a module, choose M here: the | |
989 | module will be called pcwd. | |
990 | ||
991 | Most people will say N. | |
992 | ||
993 | config MIXCOMWD | |
994 | tristate "Mixcom Watchdog" | |
261259b2 | 995 | depends on ISA |
1da177e4 LT |
996 | ---help--- |
997 | This is a driver for the Mixcom hardware watchdog cards. This | |
998 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
999 | and if it does, it reboots your computer after a certain amount of | |
1000 | time. | |
1001 | ||
1002 | To compile this driver as a module, choose M here: the | |
1003 | module will be called mixcomwd. | |
1004 | ||
1005 | Most people will say N. | |
1006 | ||
1007 | config WDT | |
1008 | tristate "WDT Watchdog timer" | |
261259b2 | 1009 | depends on ISA |
1da177e4 LT |
1010 | ---help--- |
1011 | If you have a WDT500P or WDT501P watchdog board, say Y here, | |
1012 | otherwise N. It is not possible to probe for this board, which means | |
1013 | that you have to inform the kernel about the IO port and IRQ that | |
1014 | is needed (you can do this via the io and irq parameters) | |
1015 | ||
1016 | To compile this driver as a module, choose M here: the | |
1017 | module will be called wdt. | |
1018 | ||
1da177e4 LT |
1019 | # |
1020 | # PCI-based Watchdog Cards | |
1021 | # | |
1022 | ||
1023 | comment "PCI-based Watchdog Cards" | |
261259b2 | 1024 | depends on PCI |
1da177e4 LT |
1025 | |
1026 | config PCIPCWATCHDOG | |
1027 | tristate "Berkshire Products PCI-PC Watchdog" | |
261259b2 | 1028 | depends on PCI |
1da177e4 LT |
1029 | ---help--- |
1030 | This is the driver for the Berkshire Products PCI-PC Watchdog card. | |
1031 | This card simply watches your kernel to make sure it doesn't freeze, | |
1032 | and if it does, it reboots your computer after a certain amount of | |
1033 | time. The card can also monitor the internal temperature of the PC. | |
1034 | More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>. | |
1035 | ||
1036 | To compile this driver as a module, choose M here: the | |
1037 | module will be called pcwd_pci. | |
1038 | ||
1039 | Most people will say N. | |
1040 | ||
1041 | config WDTPCI | |
1042 | tristate "PCI-WDT500/501 Watchdog timer" | |
261259b2 | 1043 | depends on PCI |
1da177e4 LT |
1044 | ---help--- |
1045 | If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N. | |
1046 | ||
9b901ee0 WVS |
1047 | If you have a PCI-WDT501 watchdog board then you can enable the |
1048 | temperature sensor by setting the type parameter to 501. | |
1da177e4 LT |
1049 | |
1050 | If you want to enable the Fan Tachometer on the PCI-WDT501, then you | |
1051 | can do this via the tachometer parameter. Only do this if you have a | |
1052 | fan tachometer actually set up. | |
1053 | ||
9b901ee0 WVS |
1054 | To compile this driver as a module, choose M here: the |
1055 | module will be called wdt_pci. | |
1056 | ||
1da177e4 LT |
1057 | # |
1058 | # USB-based Watchdog Cards | |
1059 | # | |
1060 | ||
1061 | comment "USB-based Watchdog Cards" | |
261259b2 | 1062 | depends on USB |
1da177e4 LT |
1063 | |
1064 | config USBPCWATCHDOG | |
1065 | tristate "Berkshire Products USB-PC Watchdog" | |
261259b2 | 1066 | depends on USB |
1da177e4 LT |
1067 | ---help--- |
1068 | This is the driver for the Berkshire Products USB-PC Watchdog card. | |
1069 | This card simply watches your kernel to make sure it doesn't freeze, | |
1070 | and if it does, it reboots your computer after a certain amount of | |
1071 | time. The card can also monitor the internal temperature of the PC. | |
1072 | More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>. | |
1073 | ||
1074 | To compile this driver as a module, choose M here: the | |
1075 | module will be called pcwd_usb. | |
1076 | ||
1077 | Most people will say N. | |
1078 | ||
261259b2 | 1079 | endif # WATCHDOG |