Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Video configuration | |
3 | # | |
4 | ||
5 | menu "Graphics support" | |
6 | ||
8f27489d | 7 | source "drivers/video/backlight/Kconfig" |
2ee12163 | 8 | source "drivers/video/display/Kconfig" |
ba70710e | 9 | |
b2f594fd AD |
10 | config VGASTATE |
11 | tristate | |
12 | default n | |
13 | ||
1da177e4 LT |
14 | config FB |
15 | tristate "Support for frame buffer devices" | |
16 | ---help--- | |
17 | The frame buffer device provides an abstraction for the graphics | |
18 | hardware. It represents the frame buffer of some video hardware and | |
19 | allows application software to access the graphics hardware through | |
20 | a well-defined interface, so the software doesn't need to know | |
21 | anything about the low-level (hardware register) stuff. | |
22 | ||
23 | Frame buffer devices work identically across the different | |
24 | architectures supported by Linux and make the implementation of | |
25 | application programs easier and more portable; at this point, an X | |
26 | server exists which uses the frame buffer device exclusively. | |
27 | On several non-X86 architectures, the frame buffer device is the | |
28 | only way to use the graphics hardware. | |
29 | ||
30 | The device is accessed through special device nodes, usually located | |
31 | in the /dev directory, i.e. /dev/fb*. | |
32 | ||
33 | You need an utility program called fbset to make full use of frame | |
34 | buffer devices. Please read <file:Documentation/fb/framebuffer.txt> | |
35 | and the Framebuffer-HOWTO at | |
36 | <http://www.tahallah.demon.co.uk/programming/prog.html> for more | |
37 | information. | |
38 | ||
39 | Say Y here and to the driver for your graphics board below if you | |
40 | are compiling a kernel for a non-x86 architecture. | |
41 | ||
42 | If you are compiling for the x86 architecture, you can say Y if you | |
43 | want to play with it, but it is not essential. Please note that | |
44 | running graphical applications that directly touch the hardware | |
45 | (e.g. an accelerated X server) and that are not frame buffer | |
46 | device-aware may cause unexpected results. If unsure, say N. | |
47 | ||
e0e34ef7 JS |
48 | config FIRMWARE_EDID |
49 | bool "Enable firmware EDID" | |
50 | depends on FB | |
51 | default n | |
52 | ---help--- | |
53 | This enables access to the EDID transferred from the firmware. | |
54 | On the i386, this is from the Video BIOS. Enable this if DDC/I2C | |
55 | transfers do not work for your driver and if you are using | |
56 | nvidiafb, i810fb or savagefb. | |
57 | ||
58 | In general, choosing Y for this option is safe. If you | |
59 | experience extremely long delays while booting before you get | |
60 | something on your display, try setting this to N. Matrox cards in | |
61 | combination with certain motherboards and monitors are known to | |
62 | suffer from this problem. | |
63 | ||
fc5891c8 DM |
64 | config FB_DDC |
65 | tristate | |
e0e34ef7 JS |
66 | depends on FB |
67 | select I2C_ALGOBIT | |
68 | select I2C | |
fc5891c8 DM |
69 | default n |
70 | ||
1da177e4 LT |
71 | config FB_CFB_FILLRECT |
72 | tristate | |
73 | depends on FB | |
74 | default n | |
75 | ---help--- | |
76 | Include the cfb_fillrect function for generic software rectangle | |
77 | filling. This is used by drivers that don't provide their own | |
78 | (accelerated) version. | |
79 | ||
80 | config FB_CFB_COPYAREA | |
81 | tristate | |
82 | depends on FB | |
83 | default n | |
84 | ---help--- | |
85 | Include the cfb_copyarea function for generic software area copying. | |
86 | This is used by drivers that don't provide their own (accelerated) | |
87 | version. | |
88 | ||
89 | config FB_CFB_IMAGEBLIT | |
90 | tristate | |
91 | depends on FB | |
92 | default n | |
93 | ---help--- | |
94 | Include the cfb_imageblit function for generic software image | |
95 | blitting. This is used by drivers that don't provide their own | |
96 | (accelerated) version. | |
97 | ||
68648ed1 AD |
98 | config FB_SYS_FILLRECT |
99 | tristate | |
100 | depends on FB | |
101 | default n | |
102 | ---help--- | |
103 | Include the sys_fillrect function for generic software rectangle | |
104 | filling. This is used by drivers that don't provide their own | |
105 | (accelerated) version and the framebuffer is in system RAM. | |
106 | ||
107 | config FB_SYS_COPYAREA | |
108 | tristate | |
109 | depends on FB | |
110 | default n | |
111 | ---help--- | |
112 | Include the sys_copyarea function for generic software area copying. | |
113 | This is used by drivers that don't provide their own (accelerated) | |
114 | version and the framebuffer is in system RAM. | |
115 | ||
116 | config FB_SYS_IMAGEBLIT | |
117 | tristate | |
118 | depends on FB | |
119 | default n | |
120 | ---help--- | |
121 | Include the sys_imageblit function for generic software image | |
122 | blitting. This is used by drivers that don't provide their own | |
123 | (accelerated) version and the framebuffer is in system RAM. | |
124 | ||
09aaf268 AD |
125 | config FB_SYS_FOPS |
126 | tristate | |
127 | depends on FB | |
128 | default n | |
129 | ||
60b59bea JK |
130 | config FB_DEFERRED_IO |
131 | bool | |
132 | depends on FB | |
133 | default y | |
134 | ||
a268422d OZ |
135 | config FB_SVGALIB |
136 | tristate | |
137 | depends on FB | |
138 | default n | |
139 | ---help--- | |
140 | Common utility functions useful to fbdev drivers of VGA-based | |
141 | cards. | |
142 | ||
1da177e4 LT |
143 | config FB_MACMODES |
144 | tristate | |
145 | depends on FB | |
146 | default n | |
147 | ||
5474c120 | 148 | config FB_BACKLIGHT |
4b755999 MH |
149 | bool |
150 | depends on FB | |
151 | select BACKLIGHT_LCD_SUPPORT | |
152 | select BACKLIGHT_CLASS_DEVICE | |
153 | default n | |
5474c120 | 154 | |
1da177e4 LT |
155 | config FB_MODE_HELPERS |
156 | bool "Enable Video Mode Handling Helpers" | |
157 | depends on FB | |
158 | default n | |
159 | ---help--- | |
160 | This enables functions for handling video modes using the | |
161 | Generalized Timing Formula and the EDID parser. A few drivers rely | |
162 | on this feature such as the radeonfb, rivafb, and the i810fb. If | |
163 | your driver does not take advantage of this feature, choosing Y will | |
164 | just increase the kernel size by about 5K. | |
165 | ||
166 | config FB_TILEBLITTING | |
167 | bool "Enable Tile Blitting Support" | |
168 | depends on FB | |
169 | default n | |
170 | ---help--- | |
171 | This enables tile blitting. Tile blitting is a drawing technique | |
172 | where the screen is divided into rectangular sections (tiles), whereas | |
173 | the standard blitting divides the screen into pixels. Because the | |
174 | default drawing element is a tile, drawing functions will be passed | |
175 | parameters in terms of number of tiles instead of number of pixels. | |
176 | For example, to draw a single character, instead of using bitmaps, | |
177 | an index to an array of bitmaps will be used. To clear or move a | |
178 | rectangular section of a screen, the rectangle will be described in | |
179 | terms of number of tiles in the x- and y-axis. | |
180 | ||
181 | This is particularly important to one driver, matroxfb. If | |
182 | unsure, say N. | |
183 | ||
10ccaf4b | 184 | comment "Frame buffer hardware drivers" |
e0e34ef7 JS |
185 | depends on FB |
186 | ||
1da177e4 LT |
187 | config FB_CIRRUS |
188 | tristate "Cirrus Logic support" | |
189 | depends on FB && (ZORRO || PCI) | |
190 | select FB_CFB_FILLRECT | |
191 | select FB_CFB_COPYAREA | |
192 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
193 | ---help--- |
194 | This enables support for Cirrus Logic GD542x/543x based boards on | |
195 | Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. | |
196 | ||
197 | If you have a PCI-based system, this enables support for these | |
198 | chips: GD-543x, GD-544x, GD-5480. | |
199 | ||
200 | Please read the file <file:Documentation/fb/cirrusfb.txt>. | |
201 | ||
202 | Say N unless you have such a graphics board or plan to get one | |
203 | before you next recompile the kernel. | |
204 | ||
205 | config FB_PM2 | |
206 | tristate "Permedia2 support" | |
207 | depends on FB && ((AMIGA && BROKEN) || PCI) | |
208 | select FB_CFB_FILLRECT | |
209 | select FB_CFB_COPYAREA | |
210 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
211 | help |
212 | This is the frame buffer device driver for the Permedia2 AGP frame | |
213 | buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a | |
214 | product page at | |
215 | <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>. | |
216 | ||
217 | config FB_PM2_FIFO_DISCONNECT | |
218 | bool "enable FIFO disconnect feature" | |
219 | depends on FB_PM2 && PCI | |
220 | help | |
221 | Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2). | |
222 | ||
223 | config FB_ARMCLCD | |
224 | tristate "ARM PrimeCell PL110 support" | |
225 | depends on FB && ARM && ARM_AMBA | |
226 | select FB_CFB_FILLRECT | |
227 | select FB_CFB_COPYAREA | |
228 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
229 | help |
230 | This framebuffer device driver is for the ARM PrimeCell PL110 | |
231 | Colour LCD controller. ARM PrimeCells provide the building | |
232 | blocks for System on a Chip devices. | |
233 | ||
234 | If you want to compile this as a module (=code which can be | |
235 | inserted into and removed from the running kernel), say M | |
39f5fb30 | 236 | here and read <file:Documentation/kbuild/modules.txt>. The module |
1da177e4 LT |
237 | will be called amba-clcd. |
238 | ||
903e2bbd MS |
239 | choice |
240 | ||
241 | depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) | |
242 | prompt "LCD Panel" | |
243 | default FB_ARMCLCD_SHARP_LQ035Q7DB02 | |
244 | ||
245 | config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT | |
246 | bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" | |
247 | help | |
248 | This is an implementation of the Sharp LQ035Q7DB02, a 3.5" | |
cab00891 | 249 | color QVGA, HRTFT panel. The LogicPD device includes |
903e2bbd MS |
250 | an integrated HRTFT controller IC. |
251 | The native resolution is 240x320. | |
252 | ||
253 | config FB_ARMCLCD_SHARP_LQ057Q3DC02 | |
254 | bool "LogicPD LCD 5.7\" QVGA" | |
255 | help | |
256 | This is an implementation of the Sharp LQ057Q3DC02, a 5.7" | |
257 | color QVGA, TFT panel. The LogicPD device includes an | |
258 | The native resolution is 320x240. | |
259 | ||
260 | config FB_ARMCLCD_SHARP_LQ64D343 | |
261 | bool "LogicPD LCD 6.4\" VGA" | |
262 | help | |
263 | This is an implementation of the Sharp LQ64D343, a 6.4" | |
264 | color VGA, TFT panel. The LogicPD device includes an | |
265 | The native resolution is 640x480. | |
266 | ||
267 | config FB_ARMCLCD_SHARP_LQ10D368 | |
268 | bool "LogicPD LCD 10.4\" VGA" | |
269 | help | |
270 | This is an implementation of the Sharp LQ10D368, a 10.4" | |
271 | color VGA, TFT panel. The LogicPD device includes an | |
272 | The native resolution is 640x480. | |
273 | ||
274 | ||
275 | config FB_ARMCLCD_SHARP_LQ121S1DG41 | |
276 | bool "LogicPD LCD 12.1\" SVGA" | |
277 | help | |
278 | This is an implementation of the Sharp LQ121S1DG41, a 12.1" | |
279 | color SVGA, TFT panel. The LogicPD device includes an | |
280 | The native resolution is 800x600. | |
281 | ||
282 | This panel requires a clock rate may be an integer fraction | |
283 | of the base LCDCLK frequency. The driver will select the | |
284 | highest frequency available that is lower than the maximum | |
285 | allowed. The panel may flicker if the clock rate is | |
286 | slower than the recommended minimum. | |
287 | ||
288 | config FB_ARMCLCD_AUO_A070VW01_WIDE | |
289 | bool "AU Optronics A070VW01 LCD 7.0\" WIDE" | |
290 | help | |
291 | This is an implementation of the AU Optronics, a 7.0" | |
292 | WIDE Color. The native resolution is 234x480. | |
293 | ||
294 | config FB_ARMCLCD_HITACHI | |
295 | bool "Hitachi Wide Screen 800x480" | |
296 | help | |
297 | This is an implementation of the Hitachi 800x480. | |
298 | ||
299 | endchoice | |
300 | ||
301 | ||
1da177e4 LT |
302 | config FB_ACORN |
303 | bool "Acorn VIDC support" | |
304 | depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) | |
305 | select FB_CFB_FILLRECT | |
306 | select FB_CFB_COPYAREA | |
307 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
308 | help |
309 | This is the frame buffer device driver for the Acorn VIDC graphics | |
310 | hardware found in Acorn RISC PCs and other ARM-based machines. If | |
311 | unsure, say N. | |
312 | ||
313 | config FB_CLPS711X | |
314 | bool "CLPS711X LCD support" | |
315 | depends on (FB = y) && ARM && ARCH_CLPS711X | |
316 | select FB_CFB_FILLRECT | |
317 | select FB_CFB_COPYAREA | |
318 | select FB_CFB_IMAGEBLIT | |
e65c0850 RD |
319 | help |
320 | Say Y to enable the Framebuffer driver for the CLPS7111 and | |
321 | EP7212 processors. | |
1da177e4 LT |
322 | |
323 | config FB_SA1100 | |
324 | bool "SA-1100 LCD support" | |
325 | depends on (FB = y) && ARM && ARCH_SA1100 | |
326 | select FB_CFB_FILLRECT | |
327 | select FB_CFB_COPYAREA | |
328 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
329 | help |
330 | This is a framebuffer device for the SA-1100 LCD Controller. | |
331 | See <http://www.linux-fbdev.org/> for information on framebuffer | |
332 | devices. | |
333 | ||
334 | If you plan to use the LCD display with your SA-1100 system, say | |
335 | Y here. | |
336 | ||
7c2f891c SH |
337 | config FB_IMX |
338 | tristate "Motorola i.MX LCD support" | |
339 | depends on FB && ARM && ARCH_IMX | |
340 | select FB_CFB_FILLRECT | |
341 | select FB_CFB_COPYAREA | |
342 | select FB_CFB_IMAGEBLIT | |
7c2f891c | 343 | |
1da177e4 LT |
344 | config FB_CYBER2000 |
345 | tristate "CyberPro 2000/2010/5000 support" | |
346 | depends on FB && PCI && (BROKEN || !SPARC64) | |
347 | select FB_CFB_FILLRECT | |
348 | select FB_CFB_COPYAREA | |
349 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
350 | help |
351 | This enables support for the Integraphics CyberPro 20x0 and 5000 | |
352 | VGA chips used in the Rebel.com Netwinder and other machines. | |
353 | Say Y if you have a NetWinder or a graphics card containing this | |
354 | device, otherwise say N. | |
355 | ||
356 | config FB_APOLLO | |
357 | bool | |
358 | depends on (FB = y) && APOLLO | |
359 | default y | |
360 | select FB_CFB_FILLRECT | |
361 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
362 | |
363 | config FB_Q40 | |
364 | bool | |
365 | depends on (FB = y) && Q40 | |
366 | default y | |
367 | select FB_CFB_FILLRECT | |
368 | select FB_CFB_COPYAREA | |
369 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
370 | |
371 | config FB_AMIGA | |
372 | tristate "Amiga native chipset support" | |
373 | depends on FB && AMIGA | |
1da177e4 LT |
374 | help |
375 | This is the frame buffer device driver for the builtin graphics | |
376 | chipset found in Amigas. | |
377 | ||
378 | To compile this driver as a module, choose M here: the | |
379 | module will be called amifb. | |
380 | ||
381 | config FB_AMIGA_OCS | |
382 | bool "Amiga OCS chipset support" | |
383 | depends on FB_AMIGA | |
384 | help | |
385 | This enables support for the original Agnus and Denise video chips, | |
386 | found in the Amiga 1000 and most A500's and A2000's. If you intend | |
387 | to run Linux on any of these systems, say Y; otherwise say N. | |
388 | ||
389 | config FB_AMIGA_ECS | |
390 | bool "Amiga ECS chipset support" | |
391 | depends on FB_AMIGA | |
392 | help | |
393 | This enables support for the Enhanced Chip Set, found in later | |
394 | A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If | |
395 | you intend to run Linux on any of these systems, say Y; otherwise | |
396 | say N. | |
397 | ||
398 | config FB_AMIGA_AGA | |
399 | bool "Amiga AGA chipset support" | |
400 | depends on FB_AMIGA | |
401 | help | |
402 | This enables support for the Advanced Graphics Architecture (also | |
403 | known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T | |
404 | and CD32. If you intend to run Linux on any of these systems, say Y; | |
405 | otherwise say N. | |
406 | ||
1da177e4 LT |
407 | config FB_FM2 |
408 | bool "Amiga FrameMaster II/Rainbow II support" | |
409 | depends on (FB = y) && ZORRO | |
410 | select FB_CFB_FILLRECT | |
411 | select FB_CFB_COPYAREA | |
412 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
413 | help |
414 | This is the frame buffer device driver for the Amiga FrameMaster | |
415 | card from BSC (exhibited 1992 but not shipped as a CBM product). | |
416 | ||
1154ea7d JK |
417 | config FB_ARC |
418 | tristate "Arc Monochrome LCD board support" | |
419 | depends on FB && X86 | |
922e6f9a AD |
420 | select FB_SYS_FILLRECT |
421 | select FB_SYS_COPYAREA | |
422 | select FB_SYS_IMAGEBLIT | |
d9a05f18 | 423 | select FB_SYS_FOPS |
1154ea7d JK |
424 | help |
425 | This enables support for the Arc Monochrome LCD board. The board | |
426 | is based on the KS-108 lcd controller and is typically a matrix | |
427 | of 2*n chips. This driver was tested with a 128x64 panel. This | |
428 | driver supports it for use with x86 SBCs through a 16 bit GPIO | |
09509603 | 429 | interface (8 bit data, 8 bit control). If you anticipate using |
1154ea7d JK |
430 | this driver, say Y or M; otherwise say N. You must specify the |
431 | GPIO IO address to be used for setting control and data. | |
432 | ||
1da177e4 LT |
433 | config FB_ATARI |
434 | bool "Atari native chipset support" | |
a1005012 MS |
435 | depends on (FB = y) && ATARI |
436 | select FB_CFB_FILLRECT | |
437 | select FB_CFB_COPYAREA | |
438 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
439 | help |
440 | This is the frame buffer device driver for the builtin graphics | |
441 | chipset found in Ataris. | |
442 | ||
443 | config FB_OF | |
444 | bool "Open Firmware frame buffer device support" | |
bed59275 | 445 | depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI) |
1da177e4 LT |
446 | select FB_CFB_FILLRECT |
447 | select FB_CFB_COPYAREA | |
448 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
449 | select FB_MACMODES |
450 | help | |
451 | Say Y if you want support with Open Firmware for your graphics | |
452 | board. | |
453 | ||
454 | config FB_CONTROL | |
455 | bool "Apple \"control\" display support" | |
a04b61d3 | 456 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
457 | select FB_CFB_FILLRECT |
458 | select FB_CFB_COPYAREA | |
459 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
460 | select FB_MACMODES |
461 | help | |
462 | This driver supports a frame buffer for the graphics adapter in the | |
463 | Power Macintosh 7300 and others. | |
464 | ||
465 | config FB_PLATINUM | |
466 | bool "Apple \"platinum\" display support" | |
a04b61d3 | 467 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
468 | select FB_CFB_FILLRECT |
469 | select FB_CFB_COPYAREA | |
470 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
471 | select FB_MACMODES |
472 | help | |
473 | This driver supports a frame buffer for the "platinum" graphics | |
474 | adapter in some Power Macintoshes. | |
475 | ||
476 | config FB_VALKYRIE | |
477 | bool "Apple \"valkyrie\" display support" | |
a04b61d3 | 478 | depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) |
1da177e4 LT |
479 | select FB_CFB_FILLRECT |
480 | select FB_CFB_COPYAREA | |
481 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
482 | select FB_MACMODES |
483 | help | |
484 | This driver supports a frame buffer for the "valkyrie" graphics | |
485 | adapter in some Power Macintoshes. | |
486 | ||
487 | config FB_CT65550 | |
488 | bool "Chips 65550 display support" | |
a04b61d3 | 489 | depends on (FB = y) && PPC32 |
1da177e4 LT |
490 | select FB_CFB_FILLRECT |
491 | select FB_CFB_COPYAREA | |
492 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
493 | help |
494 | This is the frame buffer device driver for the Chips & Technologies | |
495 | 65550 graphics chip in PowerBooks. | |
496 | ||
497 | config FB_ASILIANT | |
e65c0850 | 498 | bool "Asiliant (Chips) 69000 display support" |
1da177e4 LT |
499 | depends on (FB = y) && PCI |
500 | select FB_CFB_FILLRECT | |
501 | select FB_CFB_COPYAREA | |
502 | select FB_CFB_IMAGEBLIT | |
4de0b1ee AD |
503 | help |
504 | This is the frame buffer device driver for the Asiliant 69030 chipset | |
1da177e4 LT |
505 | |
506 | config FB_IMSTT | |
507 | bool "IMS Twin Turbo display support" | |
508 | depends on (FB = y) && PCI | |
509 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
510 | select FB_MACMODES if PPC |
511 | help | |
512 | The IMS Twin Turbo is a PCI-based frame buffer card bundled with | |
513 | many Macintosh and compatible computers. | |
514 | ||
1da177e4 LT |
515 | config FB_VGA16 |
516 | tristate "VGA 16-color graphics support" | |
517 | depends on FB && (X86 || PPC) | |
518 | select FB_CFB_FILLRECT | |
519 | select FB_CFB_COPYAREA | |
520 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 521 | select VGASTATE |
d60d2d8a | 522 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
1da177e4 LT |
523 | help |
524 | This is the frame buffer device driver for VGA 16 color graphic | |
525 | cards. Say Y if you have such a card. | |
526 | ||
527 | To compile this driver as a module, choose M here: the | |
528 | module will be called vga16fb. | |
529 | ||
530 | config FB_STI | |
531 | tristate "HP STI frame buffer device support" | |
532 | depends on FB && PARISC | |
533 | select FB_CFB_FILLRECT | |
534 | select FB_CFB_COPYAREA | |
535 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
536 | default y |
537 | ---help--- | |
538 | STI refers to the HP "Standard Text Interface" which is a set of | |
539 | BIOS routines contained in a ROM chip in HP PA-RISC based machines. | |
540 | Enabling this option will implement the linux framebuffer device | |
541 | using calls to the STI BIOS routines for initialisation. | |
542 | ||
543 | If you enable this option, you will get a planar framebuffer device | |
544 | /dev/fb which will work on the most common HP graphic cards of the | |
545 | NGLE family, including the artist chips (in the 7xx and Bxxx series), | |
546 | HCRX, HCRX24, CRX, CRX24 and VisEG series. | |
547 | ||
548 | It is safe to enable this option, so you should probably say "Y". | |
549 | ||
550 | config FB_MAC | |
551 | bool "Generic Macintosh display support" | |
552 | depends on (FB = y) && MAC | |
553 | select FB_CFB_FILLRECT | |
554 | select FB_CFB_COPYAREA | |
555 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
556 | select FB_MACMODES |
557 | ||
558 | # bool ' Apple DAFB display support' CONFIG_FB_DAFB | |
559 | config FB_HP300 | |
560 | bool | |
561 | depends on (FB = y) && HP300 | |
562 | select FB_CFB_FILLRECT | |
563 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
564 | default y |
565 | ||
566 | config FB_TGA | |
86c6f7d0 MR |
567 | tristate "TGA/SFB+ framebuffer support" |
568 | depends on FB && (ALPHA || TC) | |
1da177e4 LT |
569 | select FB_CFB_FILLRECT |
570 | select FB_CFB_COPYAREA | |
571 | select FB_CFB_IMAGEBLIT | |
1c667682 | 572 | select BITREVERSE |
86c6f7d0 MR |
573 | ---help--- |
574 | This is the frame buffer device driver for generic TGA and SFB+ | |
575 | graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, | |
576 | also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 | |
577 | TURBOchannel cards, also known as PMAGD-A, -B and -C. | |
578 | ||
579 | Due to hardware limitations ZLX-E2 and E3 cards are not supported | |
580 | for DECstation 5000/200 systems. Additionally due to firmware | |
581 | limitations these cards may cause troubles with booting DECstation | |
582 | 5000/240 and /260 systems, but are fully supported under Linux if | |
583 | you manage to get it going. ;-) | |
584 | ||
585 | Say Y if you have one of those. | |
1da177e4 LT |
586 | |
587 | config FB_VESA | |
588 | bool "VESA VGA graphics support" | |
0d078f6f | 589 | depends on (FB = y) && X86 |
1da177e4 LT |
590 | select FB_CFB_FILLRECT |
591 | select FB_CFB_COPYAREA | |
592 | select FB_CFB_IMAGEBLIT | |
c9b2ec4d | 593 | select VIDEO_SELECT |
1da177e4 LT |
594 | help |
595 | This is the frame buffer device driver for generic VESA 2.0 | |
596 | compliant graphic cards. The older VESA 1.2 cards are not supported. | |
597 | You will get a boot time penguin logo at no additional cost. Please | |
598 | read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. | |
599 | ||
90b4f9ac EH |
600 | config FB_IMAC |
601 | bool "Intel-based Macintosh Framebuffer Support" | |
b64ef8af | 602 | depends on (FB = y) && X86 && EFI |
90b4f9ac EH |
603 | select FB_CFB_FILLRECT |
604 | select FB_CFB_COPYAREA | |
605 | select FB_CFB_IMAGEBLIT | |
606 | help | |
607 | This is the frame buffer device driver for the Intel-based Macintosh | |
608 | ||
aad09e51 JK |
609 | config FB_HECUBA |
610 | tristate "Hecuba board support" | |
611 | depends on FB && X86 && MMU | |
d6774935 AD |
612 | select FB_SYS_FILLRECT |
613 | select FB_SYS_COPYAREA | |
614 | select FB_SYS_IMAGEBLIT | |
28d4564b | 615 | select FB_SYS_FOPS |
aad09e51 JK |
616 | select FB_DEFERRED_IO |
617 | help | |
618 | This enables support for the Hecuba board. This driver was tested | |
619 | with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO | |
620 | interface (8 bit data, 4 bit control). If you anticpate using | |
621 | this driver, say Y or M; otherwise say N. You must specify the | |
622 | GPIO IO address to be used for setting control and data. | |
623 | ||
1da177e4 LT |
624 | config FB_HGA |
625 | tristate "Hercules mono graphics support" | |
626 | depends on FB && X86 | |
627 | select FB_CFB_FILLRECT | |
628 | select FB_CFB_COPYAREA | |
629 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
630 | help |
631 | Say Y here if you have a Hercules mono graphics card. | |
632 | ||
633 | To compile this driver as a module, choose M here: the | |
634 | module will be called hgafb. | |
635 | ||
636 | As this card technology is 15 years old, most people will answer N | |
637 | here. | |
638 | ||
639 | config FB_HGA_ACCEL | |
640 | bool "Hercules mono Acceleration functions (EXPERIMENTAL)" | |
641 | depends on FB_HGA && EXPERIMENTAL | |
642 | ---help--- | |
643 | This will compile the Hercules mono graphics with | |
644 | acceleration functions. | |
645 | ||
1da177e4 LT |
646 | config FB_SGIVW |
647 | tristate "SGI Visual Workstation framebuffer support" | |
648 | depends on FB && X86_VISWS | |
649 | select FB_CFB_FILLRECT | |
650 | select FB_CFB_COPYAREA | |
651 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
652 | help |
653 | SGI Visual Workstation support for framebuffer graphics. | |
654 | ||
655 | config FB_GBE | |
656 | bool "SGI Graphics Backend frame buffer support" | |
657 | depends on (FB = y) && (SGI_IP32 || X86_VISWS) | |
658 | select FB_CFB_FILLRECT | |
659 | select FB_CFB_COPYAREA | |
660 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
661 | help |
662 | This is the frame buffer device driver for SGI Graphics Backend. | |
663 | This chip is used in SGI O2 and Visual Workstation 320/540. | |
664 | ||
665 | config FB_GBE_MEM | |
666 | int "Video memory size in MB" | |
667 | depends on FB_GBE | |
80c410dc | 668 | default 4 |
1da177e4 LT |
669 | help |
670 | This is the amount of memory reserved for the framebuffer, | |
671 | which can be any value between 1MB and 8MB. | |
672 | ||
1a571986 MF |
673 | config FB_SBUS |
674 | bool "SBUS and UPA framebuffers" | |
0b57ee9e | 675 | depends on (FB = y) && SPARC |
1a571986 MF |
676 | help |
677 | Say Y if you want support for SBUS or UPA based frame buffer device. | |
678 | ||
1da177e4 LT |
679 | config FB_BW2 |
680 | bool "BWtwo support" | |
e019630e | 681 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
682 | select FB_CFB_FILLRECT |
683 | select FB_CFB_COPYAREA | |
684 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
685 | help |
686 | This is the frame buffer device driver for the BWtwo frame buffer. | |
687 | ||
688 | config FB_CG3 | |
689 | bool "CGthree support" | |
e019630e | 690 | depends on (FB = y) && (SPARC && FB_SBUS) |
1a571986 | 691 | select FB_CFB_FILLRECT |
1da177e4 LT |
692 | select FB_CFB_COPYAREA |
693 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
694 | help |
695 | This is the frame buffer device driver for the CGthree frame buffer. | |
696 | ||
697 | config FB_CG6 | |
698 | bool "CGsix (GX,TurboGX) support" | |
e019630e | 699 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
700 | select FB_CFB_COPYAREA |
701 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
702 | help |
703 | This is the frame buffer device driver for the CGsix (GX, TurboGX) | |
704 | frame buffer. | |
705 | ||
706 | config FB_PVR2 | |
707 | tristate "NEC PowerVR 2 display support" | |
708 | depends on FB && SH_DREAMCAST | |
709 | select FB_CFB_FILLRECT | |
710 | select FB_CFB_COPYAREA | |
711 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
712 | ---help--- |
713 | Say Y here if you have a PowerVR 2 card in your box. If you plan to | |
714 | run linux on your Dreamcast, you will have to say Y here. | |
715 | This driver may or may not work on other PowerVR 2 cards, but is | |
716 | totally untested. Use at your own risk. If unsure, say N. | |
717 | ||
718 | To compile this driver as a module, choose M here: the | |
719 | module will be called pvr2fb. | |
720 | ||
721 | You can pass several parameters to the driver at boot time or at | |
722 | module load time. The parameters look like "video=pvr2:XXX", where | |
723 | the meaning of XXX can be found at the end of the main source file | |
724 | (<file:drivers/video/pvr2fb.c>). Please see the file | |
725 | <file:Documentation/fb/pvr2fb.txt>. | |
726 | ||
727 | config FB_EPSON1355 | |
728 | bool "Epson 1355 framebuffer support" | |
729 | depends on (FB = y) && (SUPERH || ARCH_CEIVA) | |
730 | select FB_CFB_FILLRECT | |
731 | select FB_CFB_COPYAREA | |
732 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
733 | help |
734 | Build in support for the SED1355 Epson Research Embedded RAMDAC | |
735 | LCD/CRT Controller (since redesignated as the S1D13505) as a | |
736 | framebuffer. Product specs at | |
737 | <http://www.erd.epson.com/vdc/html/products.htm>. | |
738 | ||
ecc41d5e RD |
739 | config FB_S1D13XXX |
740 | tristate "Epson S1D13XXX framebuffer support" | |
741 | depends on FB | |
742 | select FB_CFB_FILLRECT | |
743 | select FB_CFB_COPYAREA | |
744 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
745 | help |
746 | Support for S1D13XXX framebuffer device family (currently only | |
747 | working with S1D13806). Product specs at | |
748 | <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> | |
749 | ||
1da177e4 LT |
750 | config FB_NVIDIA |
751 | tristate "nVidia Framebuffer Support" | |
752 | depends on FB && PCI | |
e0e34ef7 | 753 | select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT |
1da177e4 LT |
754 | select FB_MODE_HELPERS |
755 | select FB_CFB_FILLRECT | |
756 | select FB_CFB_COPYAREA | |
757 | select FB_CFB_IMAGEBLIT | |
1c667682 | 758 | select BITREVERSE |
b2f594fd | 759 | select VGASTATE |
1da177e4 LT |
760 | help |
761 | This driver supports graphics boards with the nVidia chips, TNT | |
762 | and newer. For very old chipsets, such as the RIVA128, then use | |
763 | the rivafb. | |
764 | Say Y if you have such a graphics board. | |
765 | ||
766 | To compile this driver as a module, choose M here: the | |
767 | module will be called nvidiafb. | |
768 | ||
769 | config FB_NVIDIA_I2C | |
770 | bool "Enable DDC Support" | |
85f1503a | 771 | depends on FB_NVIDIA |
166f60dd | 772 | select FB_DDC |
1da177e4 LT |
773 | help |
774 | This enables I2C support for nVidia Chipsets. This is used | |
775 | only for getting EDID information from the attached display | |
776 | allowing for robust video mode handling and switching. | |
777 | ||
778 | Because fbdev-2.6 requires that drivers must be able to | |
779 | independently validate video mode parameters, you should say Y | |
780 | here. | |
781 | ||
5474c120 MH |
782 | config FB_NVIDIA_BACKLIGHT |
783 | bool "Support for backlight control" | |
e0e34ef7 | 784 | depends on FB_NVIDIA |
5474c120 MH |
785 | default y |
786 | help | |
787 | Say Y here if you want to control the backlight of your display. | |
788 | ||
1da177e4 LT |
789 | config FB_RIVA |
790 | tristate "nVidia Riva support" | |
791 | depends on FB && PCI | |
e0e34ef7 | 792 | select FB_BACKLIGHT if FB_RIVA_BACKLIGHT |
1da177e4 LT |
793 | select FB_MODE_HELPERS |
794 | select FB_CFB_FILLRECT | |
795 | select FB_CFB_COPYAREA | |
796 | select FB_CFB_IMAGEBLIT | |
1c667682 | 797 | select BITREVERSE |
b2f594fd | 798 | select VGASTATE |
1da177e4 LT |
799 | help |
800 | This driver supports graphics boards with the nVidia Riva/Geforce | |
801 | chips. | |
802 | Say Y if you have such a graphics board. | |
803 | ||
804 | To compile this driver as a module, choose M here: the | |
805 | module will be called rivafb. | |
806 | ||
807 | config FB_RIVA_I2C | |
808 | bool "Enable DDC Support" | |
809 | depends on FB_RIVA | |
166f60dd | 810 | select FB_DDC |
1da177e4 LT |
811 | help |
812 | This enables I2C support for nVidia Chipsets. This is used | |
813 | only for getting EDID information from the attached display | |
814 | allowing for robust video mode handling and switching. | |
815 | ||
816 | Because fbdev-2.6 requires that drivers must be able to | |
817 | independently validate video mode parameters, you should say Y | |
818 | here. | |
819 | ||
820 | config FB_RIVA_DEBUG | |
821 | bool "Lots of debug output from Riva(nVidia) driver" | |
822 | depends on FB_RIVA | |
823 | default n | |
824 | help | |
825 | Say Y here if you want the Riva driver to output all sorts | |
09509603 | 826 | of debugging information to provide to the maintainer when |
1da177e4 LT |
827 | something goes wrong. |
828 | ||
5474c120 MH |
829 | config FB_RIVA_BACKLIGHT |
830 | bool "Support for backlight control" | |
e0e34ef7 | 831 | depends on FB_RIVA |
5474c120 MH |
832 | default y |
833 | help | |
834 | Say Y here if you want to control the backlight of your display. | |
835 | ||
1da177e4 LT |
836 | config FB_I810 |
837 | tristate "Intel 810/815 support (EXPERIMENTAL)" | |
0d078f6f | 838 | depends on FB && EXPERIMENTAL && PCI && X86_32 |
1da177e4 LT |
839 | select AGP |
840 | select AGP_INTEL | |
841 | select FB_MODE_HELPERS | |
842 | select FB_CFB_FILLRECT | |
843 | select FB_CFB_COPYAREA | |
844 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 845 | select VGASTATE |
1da177e4 LT |
846 | help |
847 | This driver supports the on-board graphics built in to the Intel 810 | |
848 | and 815 chipsets. Say Y if you have and plan to use such a board. | |
849 | ||
850 | To compile this driver as a module, choose M here: the | |
851 | module will be called i810fb. | |
852 | ||
853 | For more information, please read | |
854 | <file:Documentation/fb/intel810.txt> | |
855 | ||
856 | config FB_I810_GTF | |
857 | bool "use VESA Generalized Timing Formula" | |
858 | depends on FB_I810 | |
859 | help | |
860 | If you say Y, then the VESA standard, Generalized Timing Formula | |
861 | or GTF, will be used to calculate the required video timing values | |
862 | per video mode. Since the GTF allows nondiscrete timings | |
863 | (nondiscrete being a range of values as opposed to discrete being a | |
864 | set of values), you'll be able to use any combination of horizontal | |
865 | and vertical resolutions, and vertical refresh rates without having | |
866 | to specify your own timing parameters. This is especially useful | |
867 | to maximize the performance of an aging display, or if you just | |
868 | have a display with nonstandard dimensions. A VESA compliant | |
869 | monitor is recommended, but can still work with non-compliant ones. | |
870 | If you need or want this, then select this option. The timings may | |
871 | not be compliant with Intel's recommended values. Use at your own | |
872 | risk. | |
873 | ||
874 | If you say N, the driver will revert to discrete video timings | |
875 | using a set recommended by Intel in their documentation. | |
876 | ||
877 | If unsure, say N. | |
878 | ||
74f6ae84 AD |
879 | config FB_I810_I2C |
880 | bool "Enable DDC Support" | |
db84502b | 881 | depends on FB_I810 && FB_I810_GTF |
e80987f8 | 882 | select FB_DDC |
74f6ae84 AD |
883 | help |
884 | ||
dbe7e429 AH |
885 | config FB_LE80578 |
886 | tristate "Intel LE80578 (Vermilion) support" | |
887 | depends on FB && PCI && X86 | |
888 | select FB_MODE_HELPERS | |
889 | select FB_CFB_FILLRECT | |
890 | select FB_CFB_COPYAREA | |
891 | select FB_CFB_IMAGEBLIT | |
892 | help | |
893 | This driver supports the LE80578 (Vermilion Range) chipset | |
894 | ||
895 | config FB_CARILLO_RANCH | |
896 | tristate "Intel Carillo Ranch support" | |
897 | depends on FB_LE80578 && FB && PCI && X86 | |
898 | help | |
899 | This driver supports the LE80578 (Carillo Ranch) board | |
900 | ||
1da177e4 | 901 | config FB_INTEL |
d463d34e | 902 | tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" |
0c187add | 903 | depends on FB && EXPERIMENTAL && PCI && X86 |
1da177e4 LT |
904 | select AGP |
905 | select AGP_INTEL | |
906 | select FB_MODE_HELPERS | |
907 | select FB_CFB_FILLRECT | |
908 | select FB_CFB_COPYAREA | |
909 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
910 | help |
911 | This driver supports the on-board graphics built in to the Intel | |
d463d34e | 912 | 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets. |
1da177e4 LT |
913 | Say Y if you have and plan to use such a board. |
914 | ||
1f6e8449 DM |
915 | If you say Y here and want DDC/I2C support you must first say Y to |
916 | "I2C support" and "I2C bit-banging support" in the character devices | |
917 | section. | |
918 | ||
919 | If you say M here then "I2C support" and "I2C bit-banging support" | |
920 | can be build either as modules or built-in. | |
921 | ||
922 | To compile this driver as a module, choose M here: the | |
1da177e4 LT |
923 | module will be called intelfb. |
924 | ||
d463d34e CM |
925 | For more information, please read <file:Documentation/fb/intelfb.txt> |
926 | ||
1da177e4 | 927 | config FB_INTEL_DEBUG |
1f6e8449 | 928 | bool "Intel driver Debug Messages" |
1da177e4 LT |
929 | depends on FB_INTEL |
930 | ---help--- | |
931 | Say Y here if you want the Intel driver to output all sorts | |
09509603 | 932 | of debugging information to provide to the maintainer when |
1da177e4 LT |
933 | something goes wrong. |
934 | ||
1f6e8449 DM |
935 | config FB_INTEL_I2C |
936 | bool "DDC/I2C for Intel framebuffer support" | |
937 | depends on FB_INTEL | |
166f60dd | 938 | select FB_DDC |
1f6e8449 DM |
939 | default y |
940 | help | |
941 | Say Y here if you want DDC/I2C support for your on-board Intel graphics. | |
942 | ||
1da177e4 LT |
943 | config FB_MATROX |
944 | tristate "Matrox acceleration" | |
945 | depends on FB && PCI | |
946 | select FB_CFB_FILLRECT | |
947 | select FB_CFB_COPYAREA | |
948 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
949 | select FB_TILEBLITTING |
950 | select FB_MACMODES if PPC_PMAC | |
951 | ---help--- | |
952 | Say Y here if you have a Matrox Millennium, Matrox Millennium II, | |
953 | Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox | |
954 | Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, | |
955 | Matrox G400, G450 or G550 card in your box. | |
956 | ||
957 | To compile this driver as a module, choose M here: the | |
958 | module will be called matroxfb. | |
959 | ||
960 | You can pass several parameters to the driver at boot time or at | |
961 | module load time. The parameters look like "video=matrox:XXX", and | |
962 | are described in <file:Documentation/fb/matroxfb.txt>. | |
963 | ||
964 | config FB_MATROX_MILLENIUM | |
965 | bool "Millennium I/II support" | |
966 | depends on FB_MATROX | |
967 | help | |
968 | Say Y here if you have a Matrox Millennium or Matrox Millennium II | |
969 | video card. If you select "Advanced lowlevel driver options" below, | |
970 | you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp | |
971 | packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can | |
972 | also use font widths different from 8. | |
973 | ||
974 | config FB_MATROX_MYSTIQUE | |
975 | bool "Mystique support" | |
976 | depends on FB_MATROX | |
977 | help | |
978 | Say Y here if you have a Matrox Mystique or Matrox Mystique 220 | |
979 | video card. If you select "Advanced lowlevel driver options" below, | |
980 | you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp | |
981 | packed pixel and 32 bpp packed pixel. You can also use font widths | |
982 | different from 8. | |
983 | ||
984 | config FB_MATROX_G | |
985 | bool "G100/G200/G400/G450/G550 support" | |
986 | depends on FB_MATROX | |
987 | ---help--- | |
988 | Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based | |
989 | video card. If you select "Advanced lowlevel driver options", you | |
990 | should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed | |
991 | pixel and 32 bpp packed pixel. You can also use font widths | |
992 | different from 8. | |
993 | ||
994 | If you need support for G400 secondary head, you must first say Y to | |
995 | "I2C support" in the character devices section, and then to | |
996 | "Matrox I2C support" and "G400 second head support" here in the | |
997 | framebuffer section. G450/G550 secondary head and digital output | |
998 | are supported without additional modules. | |
999 | ||
1000 | The driver starts in monitor mode. You must use the matroxset tool | |
1001 | (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to | |
1002 | swap primary and secondary head outputs, or to change output mode. | |
1003 | Secondary head driver always start in 640x480 resolution and you | |
1004 | must use fbset to change it. | |
1005 | ||
1006 | Do not forget that second head supports only 16 and 32 bpp | |
1007 | packed pixels, so it is a good idea to compile them into the kernel | |
1008 | too. You can use only some font widths, as the driver uses generic | |
1009 | painting procedures (the secondary head does not use acceleration | |
1010 | engine). | |
1011 | ||
1012 | G450/G550 hardware can display TV picture only from secondary CRTC, | |
1013 | and it performs no scaling, so picture must have 525 or 625 lines. | |
1014 | ||
1015 | config FB_MATROX_I2C | |
1016 | tristate "Matrox I2C support" | |
166f60dd JS |
1017 | depends on FB_MATROX |
1018 | select FB_DDC | |
1da177e4 LT |
1019 | ---help--- |
1020 | This drivers creates I2C buses which are needed for accessing the | |
1021 | DDC (I2C) bus present on all Matroxes, an I2C bus which | |
1022 | interconnects Matrox optional devices, like MGA-TVO on G200 and | |
1023 | G400, and the secondary head DDC bus, present on G400 only. | |
1024 | ||
1025 | You can say Y or M here if you want to experiment with monitor | |
1026 | detection code. You must say Y or M here if you want to use either | |
1027 | second head of G400 or MGA-TVO on G200 or G400. | |
1028 | ||
1029 | If you compile it as module, it will create a module named | |
1030 | i2c-matroxfb. | |
1031 | ||
1032 | config FB_MATROX_MAVEN | |
1033 | tristate "G400 second head support" | |
1034 | depends on FB_MATROX_G && FB_MATROX_I2C | |
1035 | ---help--- | |
1036 | WARNING !!! This support does not work with G450 !!! | |
1037 | ||
1038 | Say Y or M here if you want to use a secondary head (meaning two | |
1039 | monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary | |
1040 | head is not compatible with accelerated XFree 3.3.x SVGA servers - | |
1041 | secondary head output is blanked while you are in X. With XFree | |
1042 | 3.9.17 preview you can use both heads if you use SVGA over fbdev or | |
1043 | the fbdev driver on first head and the fbdev driver on second head. | |
1044 | ||
1045 | If you compile it as module, two modules are created, | |
1046 | matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for | |
1047 | both G200 and G400, matroxfb_crtc2 is needed only by G400. You must | |
1048 | also load i2c-matroxfb to get it to run. | |
1049 | ||
1050 | The driver starts in monitor mode and you must use the matroxset | |
1051 | tool (available at | |
1052 | <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to | |
1053 | PAL or NTSC or to swap primary and secondary head outputs. | |
1054 | Secondary head driver also always start in 640x480 resolution, you | |
1055 | must use fbset to change it. | |
1056 | ||
1057 | Also do not forget that second head supports only 16 and 32 bpp | |
1058 | packed pixels, so it is a good idea to compile them into the kernel | |
1059 | too. You can use only some font widths, as the driver uses generic | |
1060 | painting procedures (the secondary head does not use acceleration | |
1061 | engine). | |
1062 | ||
1063 | config FB_MATROX_MULTIHEAD | |
1064 | bool "Multihead support" | |
1065 | depends on FB_MATROX | |
1066 | ---help--- | |
1067 | Say Y here if you have more than one (supported) Matrox device in | |
1068 | your computer and you want to use all of them for different monitors | |
1069 | ("multihead"). If you have only one device, you should say N because | |
1070 | the driver compiled with Y is larger and a bit slower, especially on | |
1071 | ia32 (ix86). | |
1072 | ||
1073 | If you said M to "Matrox unified accelerated driver" and N here, you | |
1074 | will still be able to use several Matrox devices simultaneously: | |
1075 | insert several instances of the module matroxfb into the kernel | |
1076 | with insmod, supplying the parameter "dev=N" where N is 0, 1, etc. | |
1077 | for the different Matrox devices. This method is slightly faster but | |
1078 | uses 40 KB of kernel memory per Matrox card. | |
1079 | ||
1080 | There is no need for enabling 'Matrox multihead support' if you have | |
1081 | only one Matrox card in the box. | |
1082 | ||
1da177e4 LT |
1083 | config FB_RADEON |
1084 | tristate "ATI Radeon display support" | |
1085 | depends on FB && PCI | |
e0e34ef7 | 1086 | select FB_BACKLIGHT if FB_RADEON_BACKLIGHT |
1da177e4 LT |
1087 | select FB_MODE_HELPERS |
1088 | select FB_CFB_FILLRECT | |
1089 | select FB_CFB_COPYAREA | |
1090 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1091 | select FB_MACMODES if PPC_OF |
1092 | help | |
1093 | Choose this option if you want to use an ATI Radeon graphics card as | |
1094 | a framebuffer device. There are both PCI and AGP versions. You | |
1095 | don't need to choose this to run the Radeon in plain VGA mode. | |
1096 | ||
1097 | If you say Y here and want DDC/I2C support you must first say Y to | |
1098 | "I2C support" and "I2C bit-banging support" in the character devices | |
1099 | section. | |
1100 | ||
1101 | If you say M here then "I2C support" and "I2C bit-banging support" | |
1102 | can be build either as modules or built-in. | |
1103 | ||
1104 | There is a product page at | |
f510a3c3 | 1105 | http://apps.ati.com/ATIcompare/ |
5474c120 | 1106 | |
1da177e4 LT |
1107 | config FB_RADEON_I2C |
1108 | bool "DDC/I2C for ATI Radeon support" | |
1109 | depends on FB_RADEON | |
166f60dd | 1110 | select FB_DDC |
1da177e4 LT |
1111 | default y |
1112 | help | |
1113 | Say Y here if you want DDC/I2C support for your Radeon board. | |
1114 | ||
5474c120 MH |
1115 | config FB_RADEON_BACKLIGHT |
1116 | bool "Support for backlight control" | |
e0e34ef7 | 1117 | depends on FB_RADEON |
5474c120 MH |
1118 | default y |
1119 | help | |
1120 | Say Y here if you want to control the backlight of your display. | |
1121 | ||
1da177e4 LT |
1122 | config FB_RADEON_DEBUG |
1123 | bool "Lots of debug output from Radeon driver" | |
1124 | depends on FB_RADEON | |
1125 | default n | |
1126 | help | |
1127 | Say Y here if you want the Radeon driver to output all sorts | |
09509603 | 1128 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1129 | something goes wrong. |
1130 | ||
1131 | config FB_ATY128 | |
1132 | tristate "ATI Rage128 display support" | |
1133 | depends on FB && PCI | |
1134 | select FB_CFB_FILLRECT | |
1135 | select FB_CFB_COPYAREA | |
1136 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1137 | select FB_BACKLIGHT if FB_ATY128_BACKLIGHT |
1da177e4 LT |
1138 | select FB_MACMODES if PPC_PMAC |
1139 | help | |
1140 | This driver supports graphics boards with the ATI Rage128 chips. | |
1141 | Say Y if you have such a graphics board and read | |
1142 | <file:Documentation/fb/aty128fb.txt>. | |
1143 | ||
1144 | To compile this driver as a module, choose M here: the | |
1145 | module will be called aty128fb. | |
1146 | ||
5474c120 MH |
1147 | config FB_ATY128_BACKLIGHT |
1148 | bool "Support for backlight control" | |
e0e34ef7 | 1149 | depends on FB_ATY128 |
5474c120 MH |
1150 | default y |
1151 | help | |
1152 | Say Y here if you want to control the backlight of your display. | |
1153 | ||
1da177e4 LT |
1154 | config FB_ATY |
1155 | tristate "ATI Mach64 display support" if PCI || ATARI | |
f2e782ef | 1156 | depends on FB && !SPARC32 |
1da177e4 LT |
1157 | select FB_CFB_FILLRECT |
1158 | select FB_CFB_COPYAREA | |
1159 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1160 | select FB_BACKLIGHT if FB_ATY_BACKLIGHT |
1da177e4 LT |
1161 | select FB_MACMODES if PPC |
1162 | help | |
1163 | This driver supports graphics boards with the ATI Mach64 chips. | |
1164 | Say Y if you have such a graphics board. | |
1165 | ||
1166 | To compile this driver as a module, choose M here: the | |
1167 | module will be called atyfb. | |
1168 | ||
1169 | config FB_ATY_CT | |
1170 | bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" | |
1171 | depends on PCI && FB_ATY | |
1172 | default y if SPARC64 && FB_PCI | |
1173 | help | |
1174 | Say Y here to support use of ATI's 64-bit Rage boards (or other | |
1175 | boards based on the Mach64 CT, VT, GT, and LT chipsets) as a | |
1176 | framebuffer device. The ATI product support page for these boards | |
1177 | is at <http://support.ati.com/products/pc/mach64/>. | |
1178 | ||
1179 | config FB_ATY_GENERIC_LCD | |
1180 | bool "Mach64 generic LCD support (EXPERIMENTAL)" | |
1181 | depends on FB_ATY_CT | |
1182 | help | |
1183 | Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, | |
1184 | Rage XC, or Rage XL chipset. | |
1185 | ||
1da177e4 LT |
1186 | config FB_ATY_GX |
1187 | bool "Mach64 GX support" if PCI | |
1188 | depends on FB_ATY | |
1189 | default y if ATARI | |
1190 | help | |
1191 | Say Y here to support use of the ATI Mach64 Graphics Expression | |
1192 | board (or other boards based on the Mach64 GX chipset) as a | |
1193 | framebuffer device. The ATI product support page for these boards | |
1194 | is at | |
1195 | <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. | |
1196 | ||
5474c120 MH |
1197 | config FB_ATY_BACKLIGHT |
1198 | bool "Support for backlight control" | |
e0e34ef7 | 1199 | depends on FB_ATY |
5474c120 MH |
1200 | default y |
1201 | help | |
1202 | Say Y here if you want to control the backlight of your display. | |
1203 | ||
a268422d OZ |
1204 | config FB_S3 |
1205 | tristate "S3 Trio/Virge support" | |
1206 | depends on FB && PCI | |
1207 | select FB_CFB_FILLRECT | |
1208 | select FB_CFB_COPYAREA | |
1209 | select FB_CFB_IMAGEBLIT | |
1210 | select FB_TILEBLITTING | |
1211 | select FB_SVGALIB | |
b2f594fd | 1212 | select VGASTATE |
8db51668 | 1213 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
a268422d OZ |
1214 | ---help--- |
1215 | Driver for graphics boards with S3 Trio / S3 Virge chip. | |
1216 | ||
1da177e4 LT |
1217 | config FB_SAVAGE |
1218 | tristate "S3 Savage support" | |
1219 | depends on FB && PCI && EXPERIMENTAL | |
1da177e4 LT |
1220 | select FB_MODE_HELPERS |
1221 | select FB_CFB_FILLRECT | |
1222 | select FB_CFB_COPYAREA | |
1223 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1224 | select VGASTATE |
1da177e4 LT |
1225 | help |
1226 | This driver supports notebooks and computers with S3 Savage PCI/AGP | |
1227 | chips. | |
1228 | ||
1229 | Say Y if you have such a graphics card. | |
1230 | ||
1231 | To compile this driver as a module, choose M here; the module | |
1232 | will be called savagefb. | |
1233 | ||
1234 | config FB_SAVAGE_I2C | |
1235 | bool "Enable DDC2 Support" | |
1236 | depends on FB_SAVAGE | |
166f60dd | 1237 | select FB_DDC |
1da177e4 LT |
1238 | help |
1239 | This enables I2C support for S3 Savage Chipsets. This is used | |
1240 | only for getting EDID information from the attached display | |
1241 | allowing for robust video mode handling and switching. | |
1242 | ||
1243 | Because fbdev-2.6 requires that drivers must be able to | |
1244 | independently validate video mode parameters, you should say Y | |
1245 | here. | |
1246 | ||
1247 | config FB_SAVAGE_ACCEL | |
1248 | bool "Enable Console Acceleration" | |
1249 | depends on FB_SAVAGE | |
1250 | default n | |
1251 | help | |
1252 | This option will compile in console acceleration support. If | |
1253 | the resulting framebuffer console has bothersome glitches, then | |
1254 | choose N here. | |
1255 | ||
1256 | config FB_SIS | |
544393fe | 1257 | tristate "SiS/XGI display support" |
1da177e4 LT |
1258 | depends on FB && PCI |
1259 | select FB_CFB_FILLRECT | |
1260 | select FB_CFB_COPYAREA | |
1261 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 1262 | help |
544393fe TW |
1263 | This is the frame buffer device driver for the SiS 300, 315, 330 |
1264 | and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. | |
1265 | Specs available at <http://www.sis.com> and <http://www.xgitech.com>. | |
1da177e4 LT |
1266 | |
1267 | To compile this driver as a module, choose M here; the module | |
1268 | will be called sisfb. | |
1269 | ||
1270 | config FB_SIS_300 | |
1271 | bool "SiS 300 series support" | |
1272 | depends on FB_SIS | |
1273 | help | |
1274 | Say Y here to support use of the SiS 300/305, 540, 630 and 730. | |
1275 | ||
1276 | config FB_SIS_315 | |
544393fe | 1277 | bool "SiS 315/330/340 series and XGI support" |
1da177e4 LT |
1278 | depends on FB_SIS |
1279 | help | |
544393fe TW |
1280 | Say Y here to support use of the SiS 315, 330 and 340 series |
1281 | (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well | |
1282 | as XGI V3XT, V5, V8 and Z7. | |
1da177e4 LT |
1283 | |
1284 | config FB_NEOMAGIC | |
1285 | tristate "NeoMagic display support" | |
1286 | depends on FB && PCI | |
1287 | select FB_MODE_HELPERS | |
1288 | select FB_CFB_FILLRECT | |
1289 | select FB_CFB_COPYAREA | |
1290 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1291 | select VGASTATE |
1da177e4 LT |
1292 | help |
1293 | This driver supports notebooks with NeoMagic PCI chips. | |
1294 | Say Y if you have such a graphics card. | |
1295 | ||
1296 | To compile this driver as a module, choose M here: the | |
1297 | module will be called neofb. | |
1298 | ||
1299 | config FB_KYRO | |
1300 | tristate "IMG Kyro support" | |
1301 | depends on FB && PCI | |
1302 | select FB_CFB_FILLRECT | |
1303 | select FB_CFB_COPYAREA | |
1304 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1305 | help |
1306 | Say Y here if you have a STG4000 / Kyro / PowerVR 3 based | |
1307 | graphics board. | |
1308 | ||
1309 | To compile this driver as a module, choose M here: the | |
1310 | module will be called kyrofb. | |
1311 | ||
1312 | config FB_3DFX | |
1313 | tristate "3Dfx Banshee/Voodoo3 display support" | |
1314 | depends on FB && PCI | |
1315 | select FB_CFB_IMAGEBLIT | |
1316 | select FB_CFB_FILLRECT | |
1317 | select FB_CFB_COPYAREA | |
1da177e4 LT |
1318 | help |
1319 | This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 | |
1320 | chips. Say Y if you have such a graphics board. | |
1321 | ||
1322 | To compile this driver as a module, choose M here: the | |
1323 | module will be called tdfxfb. | |
1324 | ||
1325 | config FB_3DFX_ACCEL | |
1326 | bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)" | |
1327 | depends on FB_3DFX && EXPERIMENTAL | |
1328 | ---help--- | |
1329 | This will compile the 3Dfx Banshee/Voodoo3 frame buffer device | |
1330 | with acceleration functions. | |
1331 | ||
1332 | ||
1333 | config FB_VOODOO1 | |
1334 | tristate "3Dfx Voodoo Graphics (sst1) support" | |
1335 | depends on FB && PCI | |
1336 | select FB_CFB_FILLRECT | |
1337 | select FB_CFB_COPYAREA | |
1338 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1339 | ---help--- |
1340 | Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or | |
1341 | Voodoo2 (cvg) based graphics card. | |
1342 | ||
1343 | To compile this driver as a module, choose M here: the | |
1344 | module will be called sstfb. | |
1345 | ||
1346 | WARNING: Do not use any application that uses the 3D engine | |
1347 | (namely glide) while using this driver. | |
1348 | Please read the <file:Documentation/fb/README-sstfb.txt> for supported | |
1349 | options and other important info support. | |
1350 | ||
9fa68eae KP |
1351 | config FB_CYBLA |
1352 | tristate "Cyberblade/i1 support" | |
44637a12 | 1353 | depends on FB && PCI && X86_32 && !64BIT |
9fa68eae | 1354 | select FB_CFB_IMAGEBLIT |
9fa68eae KP |
1355 | select VIDEO_SELECT |
1356 | ---help--- | |
1357 | This driver is supposed to support the Trident Cyberblade/i1 | |
1358 | graphics core integrated in the VIA VT8601A North Bridge, | |
1359 | also known as VIA Apollo PLE133. | |
1360 | ||
1361 | Status: | |
1362 | - Developed, tested and working on EPIA 5000 and EPIA 800. | |
1363 | - Does work reliable on all systems with CRT/LCD connected to | |
1364 | normal VGA ports. | |
1365 | - Should work on systems that do use the internal LCD port, but | |
1366 | this is absolutely not tested. | |
1367 | ||
1368 | Character imageblit, copyarea and rectangle fill are hw accelerated, | |
1369 | ypan scrolling is used by default. | |
1370 | ||
1371 | Please do read <file:Documentation/fb/cyblafb/*>. | |
1372 | ||
1373 | To compile this driver as a module, choose M here: the | |
1374 | module will be called cyblafb. | |
1375 | ||
1da177e4 LT |
1376 | config FB_TRIDENT |
1377 | tristate "Trident support" | |
1378 | depends on FB && PCI | |
1379 | select FB_CFB_FILLRECT | |
1380 | select FB_CFB_COPYAREA | |
1381 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1382 | ---help--- |
1383 | This driver is supposed to support graphics boards with the | |
1384 | Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops | |
1385 | but also on some motherboards. For more information, read | |
1386 | <file:Documentation/fb/tridentfb.txt> | |
1387 | ||
9fa68eae KP |
1388 | Cyberblade/i1 support will be removed soon, use the cyblafb driver |
1389 | instead. | |
1390 | ||
1da177e4 LT |
1391 | Say Y if you have such a graphics board. |
1392 | ||
9fa68eae | 1393 | |
1da177e4 LT |
1394 | To compile this driver as a module, choose M here: the |
1395 | module will be called tridentfb. | |
1396 | ||
1397 | config FB_TRIDENT_ACCEL | |
1398 | bool "Trident Acceleration functions (EXPERIMENTAL)" | |
1399 | depends on FB_TRIDENT && EXPERIMENTAL | |
1400 | ---help--- | |
1401 | This will compile the Trident frame buffer device with | |
1402 | acceleration functions. | |
1403 | ||
1da177e4 LT |
1404 | config FB_PM3 |
1405 | tristate "Permedia3 support" | |
1406 | depends on FB && PCI && BROKEN | |
1407 | help | |
1408 | This is the frame buffer device driver for the 3DLabs Permedia3 | |
1409 | chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & | |
1410 | similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 | |
1411 | and maybe other boards. | |
1412 | ||
1da177e4 LT |
1413 | config FB_AU1100 |
1414 | bool "Au1100 LCD Driver" | |
1415 | depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y | |
1416 | ||
f95ec3c6 RB |
1417 | config FB_AU1200 |
1418 | bool "Au1200 LCD Driver" | |
833f8062 | 1419 | depends on (FB = y) && MIPS && SOC_AU1200 |
f95ec3c6 RB |
1420 | select FB_CFB_FILLRECT |
1421 | select FB_CFB_COPYAREA | |
1422 | select FB_CFB_IMAGEBLIT | |
1423 | help | |
1424 | This is the framebuffer driver for the AMD Au1200 SOC. It can drive | |
1425 | various panels and CRTs by passing in kernel cmd line option | |
1426 | au1200fb:panel=<name>. | |
1427 | ||
1da177e4 LT |
1428 | source "drivers/video/geode/Kconfig" |
1429 | ||
1da177e4 LT |
1430 | config FB_FFB |
1431 | bool "Creator/Creator3D/Elite3D support" | |
1432 | depends on FB_SBUS && SPARC64 | |
1433 | select FB_CFB_COPYAREA | |
1434 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1435 | help |
1436 | This is the frame buffer device driver for the Creator, Creator3D, | |
1437 | and Elite3D graphics boards. | |
1438 | ||
1439 | config FB_TCX | |
1440 | bool "TCX (SS4/SS5 only) support" | |
1441 | depends on FB_SBUS | |
1442 | select FB_CFB_FILLRECT | |
1443 | select FB_CFB_COPYAREA | |
1444 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1445 | help |
1446 | This is the frame buffer device driver for the TCX 24/8bit frame | |
1447 | buffer. | |
1448 | ||
1449 | config FB_CG14 | |
1450 | bool "CGfourteen (SX) support" | |
1451 | depends on FB_SBUS | |
1452 | select FB_CFB_FILLRECT | |
1453 | select FB_CFB_COPYAREA | |
1454 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1455 | help |
1456 | This is the frame buffer device driver for the CGfourteen frame | |
1457 | buffer on Desktop SPARCsystems with the SX graphics option. | |
1458 | ||
1459 | config FB_P9100 | |
1460 | bool "P9100 (Sparcbook 3 only) support" | |
1461 | depends on FB_SBUS | |
1462 | select FB_CFB_FILLRECT | |
1463 | select FB_CFB_COPYAREA | |
1464 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1465 | help |
1466 | This is the frame buffer device driver for the P9100 card | |
1467 | supported on Sparcbook 3 machines. | |
1468 | ||
1469 | config FB_LEO | |
1470 | bool "Leo (ZX) support" | |
1471 | depends on FB_SBUS | |
1472 | select FB_CFB_FILLRECT | |
1473 | select FB_CFB_COPYAREA | |
1474 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1475 | help |
1476 | This is the frame buffer device driver for the SBUS-based Sun ZX | |
1477 | (leo) frame buffer cards. | |
1478 | ||
453e93b3 DM |
1479 | config FB_XVR500 |
1480 | bool "Sun XVR-500 3DLABS Wildcat support" | |
1481 | depends on FB && PCI && SPARC64 | |
1482 | select FB_CFB_FILLRECT | |
1483 | select FB_CFB_COPYAREA | |
1484 | select FB_CFB_IMAGEBLIT | |
1485 | help | |
1486 | This is the framebuffer device for the Sun XVR-500 and similar | |
1487 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
1488 | only works on sparc64 systems where the system firwmare has | |
1489 | mostly initialized the card already. It is treated as a | |
1490 | completely dumb framebuffer device. | |
1491 | ||
71227521 DM |
1492 | config FB_XVR2500 |
1493 | bool "Sun XVR-2500 3DLABS Wildcat support" | |
1494 | depends on FB && PCI && SPARC64 | |
1495 | select FB_CFB_FILLRECT | |
1496 | select FB_CFB_COPYAREA | |
1497 | select FB_CFB_IMAGEBLIT | |
1498 | help | |
1499 | This is the framebuffer device for the Sun XVR-2500 and similar | |
1500 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
1501 | only works on sparc64 systems where the system firwmare has | |
1502 | mostly initialized the card already. It is treated as a | |
1503 | completely dumb framebuffer device. | |
1504 | ||
1da177e4 LT |
1505 | config FB_PCI |
1506 | bool "PCI framebuffers" | |
0b57ee9e | 1507 | depends on (FB = y) && PCI && SPARC |
1da177e4 LT |
1508 | |
1509 | config FB_IGA | |
1510 | bool "IGA 168x display support" | |
1511 | depends on SPARC32 && FB_PCI | |
1512 | select FB_CFB_FILLRECT | |
1513 | select FB_CFB_COPYAREA | |
1514 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1515 | help |
1516 | This is the framebuffer device for the INTERGRAPHICS 1680 and | |
1517 | successor frame buffer cards. | |
1518 | ||
1519 | config FB_HIT | |
1520 | tristate "HD64461 Frame Buffer support" | |
1521 | depends on FB && HD64461 | |
1522 | select FB_CFB_FILLRECT | |
1523 | select FB_CFB_COPYAREA | |
1524 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1525 | help |
1526 | This is the frame buffer device driver for the Hitachi HD64461 LCD | |
1527 | frame buffer card. | |
1528 | ||
1529 | config FB_PMAG_AA | |
1530 | bool "PMAG-AA TURBOchannel framebuffer support" | |
a9350003 | 1531 | depends on (FB = y) && TC |
1da177e4 LT |
1532 | select FB_CFB_FILLRECT |
1533 | select FB_CFB_COPYAREA | |
1534 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1535 | help |
1536 | Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) | |
1537 | used mainly in the MIPS-based DECstation series. | |
1538 | ||
1539 | config FB_PMAG_BA | |
335dc50c MR |
1540 | tristate "PMAG-BA TURBOchannel framebuffer support" |
1541 | depends on FB && TC | |
1da177e4 LT |
1542 | select FB_CFB_FILLRECT |
1543 | select FB_CFB_COPYAREA | |
1544 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1545 | help |
1546 | Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) | |
1547 | used mainly in the MIPS-based DECstation series. | |
1548 | ||
1549 | config FB_PMAGB_B | |
9084b005 MR |
1550 | tristate "PMAGB-B TURBOchannel framebuffer support" |
1551 | depends on TC | |
1da177e4 LT |
1552 | select FB_CFB_FILLRECT |
1553 | select FB_CFB_COPYAREA | |
1554 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1555 | help |
1556 | Support for the PMAGB-B TURBOchannel framebuffer card used mainly | |
1557 | in the MIPS-based DECstation series. The card is currently only | |
1558 | supported in 1280x1024x8 mode. | |
1559 | ||
1560 | config FB_MAXINE | |
1561 | bool "Maxine (Personal DECstation) onboard framebuffer support" | |
a9350003 | 1562 | depends on (FB = y) && MACH_DECSTATION |
1da177e4 LT |
1563 | select FB_CFB_FILLRECT |
1564 | select FB_CFB_COPYAREA | |
1565 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1566 | help |
1567 | Support for the onboard framebuffer (1024x768x8) in the Personal | |
1568 | DECstation series (Personal DECstation 5000/20, /25, /33, /50, | |
1569 | Codename "Maxine"). | |
1570 | ||
1571 | config FB_TX3912 | |
1572 | bool "TMPTX3912/PR31700 frame buffer support" | |
1573 | depends on (FB = y) && NINO | |
1574 | select FB_CFB_FILLRECT | |
1575 | select FB_CFB_COPYAREA | |
1576 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1577 | help |
1578 | The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core | |
1579 | see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. | |
1580 | ||
1581 | Say Y here to enable kernel support for the on-board framebuffer. | |
1582 | ||
1583 | config FB_G364 | |
b38817dd YY |
1584 | bool "G364 frame buffer support" |
1585 | depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) | |
1da177e4 LT |
1586 | select FB_CFB_FILLRECT |
1587 | select FB_CFB_COPYAREA | |
1588 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1589 | help |
1590 | The G364 driver is the framebuffer used in MIPS Magnum 4000 and | |
1591 | Olivetti M700-10 systems. | |
1592 | ||
1593 | config FB_68328 | |
1594 | bool "Motorola 68328 native frame buffer support" | |
833f8062 | 1595 | depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) |
1da177e4 LT |
1596 | select FB_CFB_FILLRECT |
1597 | select FB_CFB_COPYAREA | |
1598 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1599 | help |
1600 | Say Y here if you want to support the built-in frame buffer of | |
1601 | the Motorola 68328 CPU family. | |
1602 | ||
1603 | config FB_PXA | |
1604 | tristate "PXA LCD framebuffer support" | |
1605 | depends on FB && ARCH_PXA | |
1606 | select FB_CFB_FILLRECT | |
1607 | select FB_CFB_COPYAREA | |
1608 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1609 | ---help--- |
1610 | Frame buffer driver for the built-in LCD controller in the Intel | |
1611 | PXA2x0 processor. | |
1612 | ||
1613 | This driver is also available as a module ( = code which can be | |
1614 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1615 | module will be called pxafb. If you want to compile it as a module, |
39f5fb30 | 1616 | say M here and read <file:Documentation/kbuild/modules.txt>. |
1da177e4 LT |
1617 | |
1618 | If unsure, say N. | |
1619 | ||
1da177e4 LT |
1620 | config FB_PXA_PARAMETERS |
1621 | bool "PXA LCD command line parameters" | |
1622 | default n | |
1623 | depends on FB_PXA | |
1624 | ---help--- | |
1625 | Enable the use of kernel command line or module parameters | |
1626 | to configure the physical properties of the LCD panel when | |
1627 | using the PXA LCD driver. | |
1628 | ||
1629 | This option allows you to override the panel parameters | |
1630 | supplied by the platform in order to support multiple | |
1631 | different models of flatpanel. If you will only be using a | |
1632 | single model of flatpanel then you can safely leave this | |
1633 | option disabled. | |
1634 | ||
1635 | <file:Documentation/fb/pxafb.txt> describes the available parameters. | |
1636 | ||
22caf042 MR |
1637 | config FB_MBX |
1638 | tristate "2700G LCD framebuffer support" | |
1639 | depends on FB && ARCH_PXA | |
1640 | select FB_CFB_FILLRECT | |
1641 | select FB_CFB_COPYAREA | |
1642 | select FB_CFB_IMAGEBLIT | |
1643 | ---help--- | |
1644 | Framebuffer driver for the Intel 2700G (Marathon) Graphics | |
1645 | Accelerator | |
1646 | ||
1647 | config FB_MBX_DEBUG | |
1648 | bool "Enable debugging info via debugfs" | |
1649 | depends on FB_MBX && DEBUG_FS | |
1650 | default n | |
1651 | ---help--- | |
1652 | Enable this if you want debugging information using the debug | |
1653 | filesystem (debugfs) | |
1654 | ||
1655 | If unsure, say N. | |
1656 | ||
ecc41d5e RD |
1657 | config FB_W100 |
1658 | tristate "W100 frame buffer support" | |
1659 | depends on FB && PXA_SHARPSL | |
1660 | select FB_CFB_FILLRECT | |
1661 | select FB_CFB_COPYAREA | |
1662 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
1663 | ---help--- |
1664 | Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. | |
1665 | ||
1666 | This driver is also available as a module ( = code which can be | |
1667 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1668 | module will be called w100fb. If you want to compile it as a module, |
39f5fb30 | 1669 | say M here and read <file:Documentation/kbuild/modules.txt>. |
ecc41d5e RD |
1670 | |
1671 | If unsure, say N. | |
1da177e4 | 1672 | |
20fd5767 AP |
1673 | config FB_S3C2410 |
1674 | tristate "S3C2410 LCD framebuffer support" | |
1675 | depends on FB && ARCH_S3C2410 | |
1676 | select FB_CFB_FILLRECT | |
1677 | select FB_CFB_COPYAREA | |
1678 | select FB_CFB_IMAGEBLIT | |
20fd5767 AP |
1679 | ---help--- |
1680 | Frame buffer driver for the built-in LCD controller in the Samsung | |
1681 | S3C2410 processor. | |
1682 | ||
1683 | This driver is also available as a module ( = code which can be | |
1684 | inserted and removed from the running kernel whenever you want). The | |
1685 | module will be called s3c2410fb. If you want to compile it as a module, | |
39f5fb30 | 1686 | say M here and read <file:Documentation/kbuild/modules.txt>. |
20fd5767 AP |
1687 | |
1688 | If unsure, say N. | |
1689 | config FB_S3C2410_DEBUG | |
1690 | bool "S3C2410 lcd debug messages" | |
1691 | depends on FB_S3C2410 | |
1692 | help | |
1693 | Turn on debugging messages. Note that you can set/unset at run time | |
1694 | through sysfs | |
1695 | ||
5fc404e4 BD |
1696 | config FB_SM501 |
1697 | tristate "Silicon Motion SM501 framebuffer support" | |
1698 | depends on FB && MFD_SM501 | |
1699 | select FB_CFB_FILLRECT | |
1700 | select FB_CFB_COPYAREA | |
1701 | select FB_CFB_IMAGEBLIT | |
1702 | ---help--- | |
1703 | Frame buffer driver for the CRT and LCD controllers in the Silicon | |
1704 | Motion SM501. | |
1705 | ||
1706 | This driver is also available as a module ( = code which can be | |
1707 | inserted and removed from the running kernel whenever you want). The | |
1708 | module will be called sm501fb. If you want to compile it as a module, | |
1709 | say M here and read <file:Documentation/modules.txt>. | |
1710 | ||
1711 | If unsure, say N. | |
1712 | ||
1713 | ||
36c9366e VW |
1714 | config FB_PNX4008_DUM |
1715 | tristate "Display Update Module support on Philips PNX4008 board" | |
1716 | depends on FB && ARCH_PNX4008 | |
1717 | ---help--- | |
1718 | Say Y here to enable support for PNX4008 Display Update Module (DUM) | |
1719 | ||
1720 | config FB_PNX4008_DUM_RGB | |
1721 | tristate "RGB Framebuffer support on Philips PNX4008 board" | |
1722 | depends on FB_PNX4008_DUM | |
1723 | select FB_CFB_FILLRECT | |
1724 | select FB_CFB_COPYAREA | |
1725 | select FB_CFB_IMAGEBLIT | |
1726 | ---help--- | |
1727 | Say Y here to enable support for PNX4008 RGB Framebuffer | |
1728 | ||
a3d89983 PM |
1729 | config FB_IBM_GXT4500 |
1730 | tristate "Framebuffer support for IBM GXT4500P adaptor" | |
1731 | depends on PPC | |
1732 | select FB_CFB_FILLRECT | |
1733 | select FB_CFB_COPYAREA | |
1734 | select FB_CFB_IMAGEBLIT | |
1735 | ---help--- | |
1736 | Say Y here to enable support for the IBM GXT4500P display | |
1737 | adaptor, found on some IBM System P (pSeries) machines. | |
1738 | ||
310d8c11 GU |
1739 | config FB_PS3 |
1740 | bool "PS3 GPU framebuffer driver" | |
833f8062 | 1741 | depends on (FB = y) && PS3_PS3AV |
310d8c11 GU |
1742 | select FB_CFB_FILLRECT |
1743 | select FB_CFB_COPYAREA | |
1744 | select FB_CFB_IMAGEBLIT | |
1745 | ---help--- | |
1746 | Include support for the virtual frame buffer in the PS3 platform. | |
1747 | ||
1748 | config FB_PS3_DEFAULT_SIZE_M | |
1749 | int "PS3 default frame buffer size (in MiB)" | |
1750 | depends on FB_PS3 | |
1751 | default 18 | |
1752 | ---help--- | |
1753 | This is the default size (in MiB) of the virtual frame buffer in | |
1754 | the PS3. | |
1755 | The default value can be overridden on the kernel command line | |
1756 | using the "ps3fb" option (e.g. "ps3fb=9M"); | |
1757 | ||
147394c8 AK |
1758 | config FB_XILINX |
1759 | tristate "Xilinx frame buffer support" | |
1760 | depends on FB && XILINX_VIRTEX | |
1761 | select FB_CFB_FILLRECT | |
1762 | select FB_CFB_COPYAREA | |
1763 | select FB_CFB_IMAGEBLIT | |
1764 | ---help--- | |
1765 | Include support for the Xilinx ML300/ML403 reference design | |
1766 | framebuffer. ML300 carries a 640*480 LCD display on the board, | |
1767 | ML403 uses a standard DB15 VGA connector. | |
1768 | ||
1da177e4 LT |
1769 | config FB_VIRTUAL |
1770 | tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" | |
1771 | depends on FB | |
87b48849 AD |
1772 | select FB_SYS_FILLRECT |
1773 | select FB_SYS_COPYAREA | |
1774 | select FB_SYS_IMAGEBLIT | |
52102c07 | 1775 | select FB_SYS_FOPS |
1da177e4 LT |
1776 | ---help--- |
1777 | This is a `virtual' frame buffer device. It operates on a chunk of | |
1778 | unswappable kernel memory instead of on the memory of a graphics | |
1779 | board. This means you cannot see any output sent to this frame | |
1780 | buffer device, while it does consume precious memory. The main use | |
1781 | of this frame buffer device is testing and debugging the frame | |
1782 | buffer subsystem. Do NOT enable it for normal systems! To protect | |
1783 | the innocent, it has to be enabled explicitly at boot time using the | |
1784 | kernel option `video=vfb:'. | |
1785 | ||
1786 | To compile this driver as a module, choose M here: the | |
66cf7512 MF |
1787 | module will be called vfb. In order to load it, you must use |
1788 | the vfb_enable=1 option. | |
1da177e4 LT |
1789 | |
1790 | If unsure, say N. | |
e0e34ef7 | 1791 | |
1da177e4 LT |
1792 | if VT |
1793 | source "drivers/video/console/Kconfig" | |
1794 | endif | |
1795 | ||
1796 | if FB || SGI_NEWPORT_CONSOLE | |
1797 | source "drivers/video/logo/Kconfig" | |
1798 | endif | |
1799 | ||
1da177e4 LT |
1800 | endmenu |
1801 |