Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Video configuration | |
3 | # | |
4 | ||
5 | menu "Graphics support" | |
e25df120 | 6 | depends on HAS_IOMEM |
1da177e4 | 7 | |
0912e535 NF |
8 | config HAVE_FB_ATMEL |
9 | bool | |
10 | ||
179b025f RD |
11 | source "drivers/char/agp/Kconfig" |
12 | ||
deb2d2ec BH |
13 | source "drivers/gpu/vga/Kconfig" |
14 | ||
c0e09200 | 15 | source "drivers/gpu/drm/Kconfig" |
ba70710e | 16 | |
b2f594fd AD |
17 | config VGASTATE |
18 | tristate | |
19 | default n | |
20 | ||
23b0f015 LY |
21 | config VIDEO_OUTPUT_CONTROL |
22 | tristate "Lowlevel video output switch controls" | |
23b0f015 LY |
23 | help |
24 | This framework adds support for low-level control of the video | |
25 | output switch. | |
26 | ||
179b025f | 27 | menuconfig FB |
1da177e4 LT |
28 | tristate "Support for frame buffer devices" |
29 | ---help--- | |
30 | The frame buffer device provides an abstraction for the graphics | |
31 | hardware. It represents the frame buffer of some video hardware and | |
32 | allows application software to access the graphics hardware through | |
33 | a well-defined interface, so the software doesn't need to know | |
34 | anything about the low-level (hardware register) stuff. | |
35 | ||
36 | Frame buffer devices work identically across the different | |
37 | architectures supported by Linux and make the implementation of | |
38 | application programs easier and more portable; at this point, an X | |
39 | server exists which uses the frame buffer device exclusively. | |
40 | On several non-X86 architectures, the frame buffer device is the | |
41 | only way to use the graphics hardware. | |
42 | ||
43 | The device is accessed through special device nodes, usually located | |
44 | in the /dev directory, i.e. /dev/fb*. | |
45 | ||
46 | You need an utility program called fbset to make full use of frame | |
47 | buffer devices. Please read <file:Documentation/fb/framebuffer.txt> | |
48 | and the Framebuffer-HOWTO at | |
248ae0d4 | 49 | <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more |
1da177e4 LT |
50 | information. |
51 | ||
52 | Say Y here and to the driver for your graphics board below if you | |
53 | are compiling a kernel for a non-x86 architecture. | |
54 | ||
55 | If you are compiling for the x86 architecture, you can say Y if you | |
56 | want to play with it, but it is not essential. Please note that | |
57 | running graphical applications that directly touch the hardware | |
58 | (e.g. an accelerated X server) and that are not frame buffer | |
59 | device-aware may cause unexpected results. If unsure, say N. | |
60 | ||
e0e34ef7 JS |
61 | config FIRMWARE_EDID |
62 | bool "Enable firmware EDID" | |
63 | depends on FB | |
64 | default n | |
65 | ---help--- | |
66 | This enables access to the EDID transferred from the firmware. | |
67 | On the i386, this is from the Video BIOS. Enable this if DDC/I2C | |
68 | transfers do not work for your driver and if you are using | |
69 | nvidiafb, i810fb or savagefb. | |
70 | ||
71 | In general, choosing Y for this option is safe. If you | |
72 | experience extremely long delays while booting before you get | |
73 | something on your display, try setting this to N. Matrox cards in | |
74 | combination with certain motherboards and monitors are known to | |
75 | suffer from this problem. | |
76 | ||
fc5891c8 DM |
77 | config FB_DDC |
78 | tristate | |
e0e34ef7 JS |
79 | depends on FB |
80 | select I2C_ALGOBIT | |
81 | select I2C | |
fc5891c8 DM |
82 | default n |
83 | ||
4d31a2b7 MJ |
84 | config FB_BOOT_VESA_SUPPORT |
85 | bool | |
86 | depends on FB | |
87 | default n | |
88 | ---help--- | |
89 | If true, at least one selected framebuffer driver can take advantage | |
90 | of VESA video modes set at an early boot stage via the vga= parameter. | |
91 | ||
1da177e4 LT |
92 | config FB_CFB_FILLRECT |
93 | tristate | |
94 | depends on FB | |
95 | default n | |
96 | ---help--- | |
97 | Include the cfb_fillrect function for generic software rectangle | |
98 | filling. This is used by drivers that don't provide their own | |
99 | (accelerated) version. | |
100 | ||
101 | config FB_CFB_COPYAREA | |
102 | tristate | |
103 | depends on FB | |
104 | default n | |
105 | ---help--- | |
106 | Include the cfb_copyarea function for generic software area copying. | |
107 | This is used by drivers that don't provide their own (accelerated) | |
108 | version. | |
109 | ||
110 | config FB_CFB_IMAGEBLIT | |
111 | tristate | |
112 | depends on FB | |
113 | default n | |
114 | ---help--- | |
115 | Include the cfb_imageblit function for generic software image | |
116 | blitting. This is used by drivers that don't provide their own | |
117 | (accelerated) version. | |
118 | ||
779121e9 PP |
119 | config FB_CFB_REV_PIXELS_IN_BYTE |
120 | bool | |
121 | depends on FB | |
122 | default n | |
123 | ---help--- | |
124 | Allow generic frame-buffer functions to work on displays with 1, 2 | |
125 | and 4 bits per pixel depths which has opposite order of pixels in | |
126 | byte order to bytes in long order. | |
127 | ||
68648ed1 AD |
128 | config FB_SYS_FILLRECT |
129 | tristate | |
130 | depends on FB | |
131 | default n | |
132 | ---help--- | |
133 | Include the sys_fillrect function for generic software rectangle | |
134 | filling. This is used by drivers that don't provide their own | |
135 | (accelerated) version and the framebuffer is in system RAM. | |
136 | ||
137 | config FB_SYS_COPYAREA | |
138 | tristate | |
139 | depends on FB | |
140 | default n | |
141 | ---help--- | |
142 | Include the sys_copyarea function for generic software area copying. | |
143 | This is used by drivers that don't provide their own (accelerated) | |
144 | version and the framebuffer is in system RAM. | |
145 | ||
146 | config FB_SYS_IMAGEBLIT | |
147 | tristate | |
148 | depends on FB | |
149 | default n | |
150 | ---help--- | |
151 | Include the sys_imageblit function for generic software image | |
152 | blitting. This is used by drivers that don't provide their own | |
153 | (accelerated) version and the framebuffer is in system RAM. | |
154 | ||
e4c690e0 AV |
155 | menuconfig FB_FOREIGN_ENDIAN |
156 | bool "Framebuffer foreign endianness support" | |
157 | depends on FB | |
158 | ---help--- | |
159 | This menu will let you enable support for the framebuffers with | |
160 | non-native endianness (e.g. Little-Endian framebuffer on a | |
161 | Big-Endian machine). Most probably you don't have such hardware, | |
162 | so it's safe to say "n" here. | |
163 | ||
164 | choice | |
165 | prompt "Choice endianness support" | |
166 | depends on FB_FOREIGN_ENDIAN | |
167 | ||
168 | config FB_BOTH_ENDIAN | |
169 | bool "Support for Big- and Little-Endian framebuffers" | |
170 | ||
171 | config FB_BIG_ENDIAN | |
172 | bool "Support for Big-Endian framebuffers only" | |
173 | ||
174 | config FB_LITTLE_ENDIAN | |
175 | bool "Support for Little-Endian framebuffers only" | |
176 | ||
177 | endchoice | |
178 | ||
09aaf268 AD |
179 | config FB_SYS_FOPS |
180 | tristate | |
181 | depends on FB | |
182 | default n | |
183 | ||
60b59bea JK |
184 | config FB_DEFERRED_IO |
185 | bool | |
186 | depends on FB | |
60b59bea | 187 | |
0e27aa3d JK |
188 | config FB_HECUBA |
189 | tristate | |
190 | depends on FB | |
191 | depends on FB_DEFERRED_IO | |
192 | ||
a268422d OZ |
193 | config FB_SVGALIB |
194 | tristate | |
195 | depends on FB | |
196 | default n | |
197 | ---help--- | |
198 | Common utility functions useful to fbdev drivers of VGA-based | |
199 | cards. | |
200 | ||
1da177e4 LT |
201 | config FB_MACMODES |
202 | tristate | |
203 | depends on FB | |
204 | default n | |
205 | ||
5474c120 | 206 | config FB_BACKLIGHT |
4b755999 MH |
207 | bool |
208 | depends on FB | |
209 | select BACKLIGHT_LCD_SUPPORT | |
210 | select BACKLIGHT_CLASS_DEVICE | |
211 | default n | |
5474c120 | 212 | |
1da177e4 LT |
213 | config FB_MODE_HELPERS |
214 | bool "Enable Video Mode Handling Helpers" | |
215 | depends on FB | |
216 | default n | |
217 | ---help--- | |
218 | This enables functions for handling video modes using the | |
219 | Generalized Timing Formula and the EDID parser. A few drivers rely | |
220 | on this feature such as the radeonfb, rivafb, and the i810fb. If | |
221 | your driver does not take advantage of this feature, choosing Y will | |
222 | just increase the kernel size by about 5K. | |
223 | ||
224 | config FB_TILEBLITTING | |
225 | bool "Enable Tile Blitting Support" | |
226 | depends on FB | |
227 | default n | |
228 | ---help--- | |
229 | This enables tile blitting. Tile blitting is a drawing technique | |
230 | where the screen is divided into rectangular sections (tiles), whereas | |
231 | the standard blitting divides the screen into pixels. Because the | |
232 | default drawing element is a tile, drawing functions will be passed | |
233 | parameters in terms of number of tiles instead of number of pixels. | |
234 | For example, to draw a single character, instead of using bitmaps, | |
235 | an index to an array of bitmaps will be used. To clear or move a | |
236 | rectangular section of a screen, the rectangle will be described in | |
237 | terms of number of tiles in the x- and y-axis. | |
238 | ||
239 | This is particularly important to one driver, matroxfb. If | |
240 | unsure, say N. | |
241 | ||
10ccaf4b | 242 | comment "Frame buffer hardware drivers" |
e0e34ef7 JS |
243 | depends on FB |
244 | ||
1da177e4 LT |
245 | config FB_CIRRUS |
246 | tristate "Cirrus Logic support" | |
247 | depends on FB && (ZORRO || PCI) | |
248 | select FB_CFB_FILLRECT | |
249 | select FB_CFB_COPYAREA | |
250 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
251 | ---help--- |
252 | This enables support for Cirrus Logic GD542x/543x based boards on | |
253 | Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. | |
254 | ||
255 | If you have a PCI-based system, this enables support for these | |
256 | chips: GD-543x, GD-544x, GD-5480. | |
257 | ||
258 | Please read the file <file:Documentation/fb/cirrusfb.txt>. | |
259 | ||
260 | Say N unless you have such a graphics board or plan to get one | |
261 | before you next recompile the kernel. | |
262 | ||
263 | config FB_PM2 | |
264 | tristate "Permedia2 support" | |
265 | depends on FB && ((AMIGA && BROKEN) || PCI) | |
266 | select FB_CFB_FILLRECT | |
267 | select FB_CFB_COPYAREA | |
268 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 269 | help |
4edad7f0 KH |
270 | This is the frame buffer device driver for cards based on |
271 | the 3D Labs Permedia, Permedia 2 and Permedia 2V chips. | |
272 | The driver was tested on the following cards: | |
273 | Diamond FireGL 1000 PRO AGP | |
274 | ELSA Gloria Synergy PCI | |
275 | Appian Jeronimo PRO (both heads) PCI | |
276 | 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI | |
277 | Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC | |
278 | ASK Graphic Blaster Exxtreme AGP | |
279 | ||
280 | To compile this driver as a module, choose M here: the | |
281 | module will be called pm2fb. | |
1da177e4 LT |
282 | |
283 | config FB_PM2_FIFO_DISCONNECT | |
284 | bool "enable FIFO disconnect feature" | |
285 | depends on FB_PM2 && PCI | |
286 | help | |
4edad7f0 | 287 | Support the Permedia2 FIFO disconnect feature. |
1da177e4 LT |
288 | |
289 | config FB_ARMCLCD | |
290 | tristate "ARM PrimeCell PL110 support" | |
291 | depends on FB && ARM && ARM_AMBA | |
292 | select FB_CFB_FILLRECT | |
293 | select FB_CFB_COPYAREA | |
294 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
295 | help |
296 | This framebuffer device driver is for the ARM PrimeCell PL110 | |
297 | Colour LCD controller. ARM PrimeCells provide the building | |
298 | blocks for System on a Chip devices. | |
299 | ||
300 | If you want to compile this as a module (=code which can be | |
301 | inserted into and removed from the running kernel), say M | |
39f5fb30 | 302 | here and read <file:Documentation/kbuild/modules.txt>. The module |
1da177e4 LT |
303 | will be called amba-clcd. |
304 | ||
903e2bbd MS |
305 | choice |
306 | ||
307 | depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) | |
308 | prompt "LCD Panel" | |
309 | default FB_ARMCLCD_SHARP_LQ035Q7DB02 | |
310 | ||
311 | config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT | |
312 | bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" | |
313 | help | |
314 | This is an implementation of the Sharp LQ035Q7DB02, a 3.5" | |
cab00891 | 315 | color QVGA, HRTFT panel. The LogicPD device includes |
903e2bbd MS |
316 | an integrated HRTFT controller IC. |
317 | The native resolution is 240x320. | |
318 | ||
319 | config FB_ARMCLCD_SHARP_LQ057Q3DC02 | |
320 | bool "LogicPD LCD 5.7\" QVGA" | |
321 | help | |
322 | This is an implementation of the Sharp LQ057Q3DC02, a 5.7" | |
323 | color QVGA, TFT panel. The LogicPD device includes an | |
324 | The native resolution is 320x240. | |
325 | ||
326 | config FB_ARMCLCD_SHARP_LQ64D343 | |
327 | bool "LogicPD LCD 6.4\" VGA" | |
328 | help | |
329 | This is an implementation of the Sharp LQ64D343, a 6.4" | |
330 | color VGA, TFT panel. The LogicPD device includes an | |
331 | The native resolution is 640x480. | |
332 | ||
333 | config FB_ARMCLCD_SHARP_LQ10D368 | |
334 | bool "LogicPD LCD 10.4\" VGA" | |
335 | help | |
336 | This is an implementation of the Sharp LQ10D368, a 10.4" | |
337 | color VGA, TFT panel. The LogicPD device includes an | |
338 | The native resolution is 640x480. | |
339 | ||
340 | ||
341 | config FB_ARMCLCD_SHARP_LQ121S1DG41 | |
342 | bool "LogicPD LCD 12.1\" SVGA" | |
343 | help | |
344 | This is an implementation of the Sharp LQ121S1DG41, a 12.1" | |
345 | color SVGA, TFT panel. The LogicPD device includes an | |
346 | The native resolution is 800x600. | |
347 | ||
348 | This panel requires a clock rate may be an integer fraction | |
349 | of the base LCDCLK frequency. The driver will select the | |
350 | highest frequency available that is lower than the maximum | |
351 | allowed. The panel may flicker if the clock rate is | |
352 | slower than the recommended minimum. | |
353 | ||
354 | config FB_ARMCLCD_AUO_A070VW01_WIDE | |
355 | bool "AU Optronics A070VW01 LCD 7.0\" WIDE" | |
356 | help | |
357 | This is an implementation of the AU Optronics, a 7.0" | |
358 | WIDE Color. The native resolution is 234x480. | |
359 | ||
360 | config FB_ARMCLCD_HITACHI | |
361 | bool "Hitachi Wide Screen 800x480" | |
362 | help | |
363 | This is an implementation of the Hitachi 800x480. | |
364 | ||
365 | endchoice | |
366 | ||
367 | ||
1da177e4 LT |
368 | config FB_ACORN |
369 | bool "Acorn VIDC support" | |
635f0258 | 370 | depends on (FB = y) && ARM && ARCH_ACORN |
1da177e4 LT |
371 | select FB_CFB_FILLRECT |
372 | select FB_CFB_COPYAREA | |
373 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
374 | help |
375 | This is the frame buffer device driver for the Acorn VIDC graphics | |
376 | hardware found in Acorn RISC PCs and other ARM-based machines. If | |
377 | unsure, say N. | |
378 | ||
379 | config FB_CLPS711X | |
380 | bool "CLPS711X LCD support" | |
381 | depends on (FB = y) && ARM && ARCH_CLPS711X | |
382 | select FB_CFB_FILLRECT | |
383 | select FB_CFB_COPYAREA | |
384 | select FB_CFB_IMAGEBLIT | |
e65c0850 RD |
385 | help |
386 | Say Y to enable the Framebuffer driver for the CLPS7111 and | |
387 | EP7212 processors. | |
1da177e4 LT |
388 | |
389 | config FB_SA1100 | |
390 | bool "SA-1100 LCD support" | |
391 | depends on (FB = y) && ARM && ARCH_SA1100 | |
392 | select FB_CFB_FILLRECT | |
393 | select FB_CFB_COPYAREA | |
394 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
395 | help |
396 | This is a framebuffer device for the SA-1100 LCD Controller. | |
397 | See <http://www.linux-fbdev.org/> for information on framebuffer | |
398 | devices. | |
399 | ||
400 | If you plan to use the LCD display with your SA-1100 system, say | |
401 | Y here. | |
402 | ||
7c2f891c SH |
403 | config FB_IMX |
404 | tristate "Motorola i.MX LCD support" | |
8c8fdbc9 | 405 | depends on FB && (ARCH_MX1 || ARCH_MX2) |
7c2f891c SH |
406 | select FB_CFB_FILLRECT |
407 | select FB_CFB_COPYAREA | |
408 | select FB_CFB_IMAGEBLIT | |
7c2f891c | 409 | |
1da177e4 LT |
410 | config FB_CYBER2000 |
411 | tristate "CyberPro 2000/2010/5000 support" | |
412 | depends on FB && PCI && (BROKEN || !SPARC64) | |
413 | select FB_CFB_FILLRECT | |
414 | select FB_CFB_COPYAREA | |
415 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
416 | help |
417 | This enables support for the Integraphics CyberPro 20x0 and 5000 | |
418 | VGA chips used in the Rebel.com Netwinder and other machines. | |
419 | Say Y if you have a NetWinder or a graphics card containing this | |
420 | device, otherwise say N. | |
421 | ||
422 | config FB_APOLLO | |
423 | bool | |
424 | depends on (FB = y) && APOLLO | |
425 | default y | |
426 | select FB_CFB_FILLRECT | |
427 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
428 | |
429 | config FB_Q40 | |
430 | bool | |
431 | depends on (FB = y) && Q40 | |
432 | default y | |
433 | select FB_CFB_FILLRECT | |
434 | select FB_CFB_COPYAREA | |
435 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
436 | |
437 | config FB_AMIGA | |
438 | tristate "Amiga native chipset support" | |
439 | depends on FB && AMIGA | |
1da177e4 LT |
440 | help |
441 | This is the frame buffer device driver for the builtin graphics | |
442 | chipset found in Amigas. | |
443 | ||
444 | To compile this driver as a module, choose M here: the | |
445 | module will be called amifb. | |
446 | ||
447 | config FB_AMIGA_OCS | |
448 | bool "Amiga OCS chipset support" | |
449 | depends on FB_AMIGA | |
450 | help | |
451 | This enables support for the original Agnus and Denise video chips, | |
452 | found in the Amiga 1000 and most A500's and A2000's. If you intend | |
453 | to run Linux on any of these systems, say Y; otherwise say N. | |
454 | ||
455 | config FB_AMIGA_ECS | |
456 | bool "Amiga ECS chipset support" | |
457 | depends on FB_AMIGA | |
458 | help | |
459 | This enables support for the Enhanced Chip Set, found in later | |
460 | A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If | |
461 | you intend to run Linux on any of these systems, say Y; otherwise | |
462 | say N. | |
463 | ||
464 | config FB_AMIGA_AGA | |
465 | bool "Amiga AGA chipset support" | |
466 | depends on FB_AMIGA | |
467 | help | |
468 | This enables support for the Advanced Graphics Architecture (also | |
469 | known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T | |
470 | and CD32. If you intend to run Linux on any of these systems, say Y; | |
471 | otherwise say N. | |
472 | ||
1da177e4 LT |
473 | config FB_FM2 |
474 | bool "Amiga FrameMaster II/Rainbow II support" | |
475 | depends on (FB = y) && ZORRO | |
476 | select FB_CFB_FILLRECT | |
477 | select FB_CFB_COPYAREA | |
478 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
479 | help |
480 | This is the frame buffer device driver for the Amiga FrameMaster | |
481 | card from BSC (exhibited 1992 but not shipped as a CBM product). | |
482 | ||
1154ea7d JK |
483 | config FB_ARC |
484 | tristate "Arc Monochrome LCD board support" | |
485 | depends on FB && X86 | |
922e6f9a AD |
486 | select FB_SYS_FILLRECT |
487 | select FB_SYS_COPYAREA | |
488 | select FB_SYS_IMAGEBLIT | |
d9a05f18 | 489 | select FB_SYS_FOPS |
1154ea7d JK |
490 | help |
491 | This enables support for the Arc Monochrome LCD board. The board | |
492 | is based on the KS-108 lcd controller and is typically a matrix | |
493 | of 2*n chips. This driver was tested with a 128x64 panel. This | |
494 | driver supports it for use with x86 SBCs through a 16 bit GPIO | |
09509603 | 495 | interface (8 bit data, 8 bit control). If you anticipate using |
1154ea7d JK |
496 | this driver, say Y or M; otherwise say N. You must specify the |
497 | GPIO IO address to be used for setting control and data. | |
498 | ||
1da177e4 LT |
499 | config FB_ATARI |
500 | bool "Atari native chipset support" | |
a1005012 MS |
501 | depends on (FB = y) && ATARI |
502 | select FB_CFB_FILLRECT | |
503 | select FB_CFB_COPYAREA | |
504 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
505 | help |
506 | This is the frame buffer device driver for the builtin graphics | |
507 | chipset found in Ataris. | |
508 | ||
509 | config FB_OF | |
510 | bool "Open Firmware frame buffer device support" | |
bed59275 | 511 | depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI) |
1da177e4 LT |
512 | select FB_CFB_FILLRECT |
513 | select FB_CFB_COPYAREA | |
514 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
515 | select FB_MACMODES |
516 | help | |
517 | Say Y if you want support with Open Firmware for your graphics | |
518 | board. | |
519 | ||
520 | config FB_CONTROL | |
521 | bool "Apple \"control\" display support" | |
a04b61d3 | 522 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
523 | select FB_CFB_FILLRECT |
524 | select FB_CFB_COPYAREA | |
525 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
526 | select FB_MACMODES |
527 | help | |
528 | This driver supports a frame buffer for the graphics adapter in the | |
529 | Power Macintosh 7300 and others. | |
530 | ||
531 | config FB_PLATINUM | |
532 | bool "Apple \"platinum\" display support" | |
a04b61d3 | 533 | depends on (FB = y) && PPC_PMAC && PPC32 |
1da177e4 LT |
534 | select FB_CFB_FILLRECT |
535 | select FB_CFB_COPYAREA | |
536 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
537 | select FB_MACMODES |
538 | help | |
539 | This driver supports a frame buffer for the "platinum" graphics | |
540 | adapter in some Power Macintoshes. | |
541 | ||
542 | config FB_VALKYRIE | |
543 | bool "Apple \"valkyrie\" display support" | |
a04b61d3 | 544 | depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) |
1da177e4 LT |
545 | select FB_CFB_FILLRECT |
546 | select FB_CFB_COPYAREA | |
547 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
548 | select FB_MACMODES |
549 | help | |
550 | This driver supports a frame buffer for the "valkyrie" graphics | |
551 | adapter in some Power Macintoshes. | |
552 | ||
553 | config FB_CT65550 | |
554 | bool "Chips 65550 display support" | |
0f8c0234 | 555 | depends on (FB = y) && PPC32 && PCI |
1da177e4 LT |
556 | select FB_CFB_FILLRECT |
557 | select FB_CFB_COPYAREA | |
558 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
559 | help |
560 | This is the frame buffer device driver for the Chips & Technologies | |
561 | 65550 graphics chip in PowerBooks. | |
562 | ||
563 | config FB_ASILIANT | |
e65c0850 | 564 | bool "Asiliant (Chips) 69000 display support" |
1da177e4 LT |
565 | depends on (FB = y) && PCI |
566 | select FB_CFB_FILLRECT | |
567 | select FB_CFB_COPYAREA | |
568 | select FB_CFB_IMAGEBLIT | |
4de0b1ee AD |
569 | help |
570 | This is the frame buffer device driver for the Asiliant 69030 chipset | |
1da177e4 LT |
571 | |
572 | config FB_IMSTT | |
573 | bool "IMS Twin Turbo display support" | |
574 | depends on (FB = y) && PCI | |
575 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
576 | select FB_MACMODES if PPC |
577 | help | |
578 | The IMS Twin Turbo is a PCI-based frame buffer card bundled with | |
579 | many Macintosh and compatible computers. | |
580 | ||
1da177e4 LT |
581 | config FB_VGA16 |
582 | tristate "VGA 16-color graphics support" | |
583 | depends on FB && (X86 || PPC) | |
584 | select FB_CFB_FILLRECT | |
585 | select FB_CFB_COPYAREA | |
586 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 587 | select VGASTATE |
d60d2d8a | 588 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
1da177e4 LT |
589 | help |
590 | This is the frame buffer device driver for VGA 16 color graphic | |
591 | cards. Say Y if you have such a card. | |
592 | ||
593 | To compile this driver as a module, choose M here: the | |
594 | module will be called vga16fb. | |
595 | ||
e9fa7c43 MH |
596 | config FB_BF54X_LQ043 |
597 | tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)" | |
e7a05aa9 | 598 | depends on FB && (BF54x) && !BF542 |
e9fa7c43 MH |
599 | select FB_CFB_FILLRECT |
600 | select FB_CFB_COPYAREA | |
601 | select FB_CFB_IMAGEBLIT | |
602 | help | |
603 | This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD | |
604 | ||
99eeed47 MH |
605 | config FB_BFIN_T350MCQB |
606 | tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)" | |
607 | depends on FB && BLACKFIN | |
608 | select BFIN_GPTIMERS | |
609 | select FB_CFB_FILLRECT | |
610 | select FB_CFB_COPYAREA | |
611 | select FB_CFB_IMAGEBLIT | |
612 | help | |
613 | This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD | |
614 | This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI | |
615 | It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK. | |
616 | ||
9cfe4a93 MH |
617 | config FB_BFIN_LQ035Q1 |
618 | tristate "SHARP LQ035Q1DH02 TFT LCD" | |
619 | depends on FB && BLACKFIN && SPI | |
620 | select FB_CFB_FILLRECT | |
621 | select FB_CFB_COPYAREA | |
622 | select FB_CFB_IMAGEBLIT | |
623 | select BFIN_GPTIMERS | |
624 | help | |
625 | This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on | |
626 | the Blackfin Landscape LCD EZ-Extender Card. | |
627 | This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI | |
628 | It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK. | |
629 | ||
630 | To compile this driver as a module, choose M here: the | |
631 | module will be called bfin-lq035q1-fb. | |
99eeed47 | 632 | |
1da177e4 LT |
633 | config FB_STI |
634 | tristate "HP STI frame buffer device support" | |
635 | depends on FB && PARISC | |
636 | select FB_CFB_FILLRECT | |
637 | select FB_CFB_COPYAREA | |
638 | select FB_CFB_IMAGEBLIT | |
17085a93 AB |
639 | select STI_CONSOLE |
640 | select VT | |
1da177e4 LT |
641 | default y |
642 | ---help--- | |
643 | STI refers to the HP "Standard Text Interface" which is a set of | |
644 | BIOS routines contained in a ROM chip in HP PA-RISC based machines. | |
645 | Enabling this option will implement the linux framebuffer device | |
646 | using calls to the STI BIOS routines for initialisation. | |
647 | ||
648 | If you enable this option, you will get a planar framebuffer device | |
649 | /dev/fb which will work on the most common HP graphic cards of the | |
650 | NGLE family, including the artist chips (in the 7xx and Bxxx series), | |
651 | HCRX, HCRX24, CRX, CRX24 and VisEG series. | |
652 | ||
653 | It is safe to enable this option, so you should probably say "Y". | |
654 | ||
655 | config FB_MAC | |
656 | bool "Generic Macintosh display support" | |
657 | depends on (FB = y) && MAC | |
658 | select FB_CFB_FILLRECT | |
659 | select FB_CFB_COPYAREA | |
660 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
661 | select FB_MACMODES |
662 | ||
1da177e4 LT |
663 | config FB_HP300 |
664 | bool | |
ad7e484f | 665 | depends on (FB = y) && DIO |
1da177e4 | 666 | select FB_CFB_IMAGEBLIT |
1da177e4 LT |
667 | default y |
668 | ||
669 | config FB_TGA | |
86c6f7d0 MR |
670 | tristate "TGA/SFB+ framebuffer support" |
671 | depends on FB && (ALPHA || TC) | |
1da177e4 LT |
672 | select FB_CFB_FILLRECT |
673 | select FB_CFB_COPYAREA | |
674 | select FB_CFB_IMAGEBLIT | |
1c667682 | 675 | select BITREVERSE |
86c6f7d0 MR |
676 | ---help--- |
677 | This is the frame buffer device driver for generic TGA and SFB+ | |
678 | graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, | |
679 | also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 | |
680 | TURBOchannel cards, also known as PMAGD-A, -B and -C. | |
681 | ||
682 | Due to hardware limitations ZLX-E2 and E3 cards are not supported | |
683 | for DECstation 5000/200 systems. Additionally due to firmware | |
684 | limitations these cards may cause troubles with booting DECstation | |
685 | 5000/240 and /260 systems, but are fully supported under Linux if | |
686 | you manage to get it going. ;-) | |
687 | ||
688 | Say Y if you have one of those. | |
1da177e4 | 689 | |
8bdb3a2d MJ |
690 | config FB_UVESA |
691 | tristate "Userspace VESA VGA graphics support" | |
692 | depends on FB && CONNECTOR | |
693 | select FB_CFB_FILLRECT | |
694 | select FB_CFB_COPYAREA | |
695 | select FB_CFB_IMAGEBLIT | |
696 | select FB_MODE_HELPERS | |
697 | help | |
698 | This is the frame buffer driver for generic VBE 2.0 compliant | |
699 | graphic cards. It can also take advantage of VBE 3.0 features, | |
700 | such as refresh rate adjustment. | |
701 | ||
702 | This driver generally provides more features than vesafb but | |
703 | requires a userspace helper application called 'v86d'. See | |
704 | <file:Documentation/fb/uvesafb.txt> for more information. | |
705 | ||
706 | If unsure, say N. | |
707 | ||
1da177e4 LT |
708 | config FB_VESA |
709 | bool "VESA VGA graphics support" | |
0d078f6f | 710 | depends on (FB = y) && X86 |
1da177e4 LT |
711 | select FB_CFB_FILLRECT |
712 | select FB_CFB_COPYAREA | |
713 | select FB_CFB_IMAGEBLIT | |
4d31a2b7 | 714 | select FB_BOOT_VESA_SUPPORT |
1da177e4 LT |
715 | help |
716 | This is the frame buffer device driver for generic VESA 2.0 | |
717 | compliant graphic cards. The older VESA 1.2 cards are not supported. | |
718 | You will get a boot time penguin logo at no additional cost. Please | |
719 | read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. | |
720 | ||
7c83172b HY |
721 | config FB_EFI |
722 | bool "EFI-based Framebuffer Support" | |
b64ef8af | 723 | depends on (FB = y) && X86 && EFI |
90b4f9ac EH |
724 | select FB_CFB_FILLRECT |
725 | select FB_CFB_COPYAREA | |
726 | select FB_CFB_IMAGEBLIT | |
727 | help | |
7c08c9ae PJ |
728 | This is the EFI frame buffer device driver. If the firmware on |
729 | your platform is EFI 1.10 or UEFI 2.0, select Y to add support for | |
730 | using the EFI framebuffer as your console. | |
90b4f9ac | 731 | |
0e27aa3d JK |
732 | config FB_N411 |
733 | tristate "N411 Apollo/Hecuba devkit support" | |
aad09e51 | 734 | depends on FB && X86 && MMU |
d6774935 AD |
735 | select FB_SYS_FILLRECT |
736 | select FB_SYS_COPYAREA | |
737 | select FB_SYS_IMAGEBLIT | |
28d4564b | 738 | select FB_SYS_FOPS |
aad09e51 | 739 | select FB_DEFERRED_IO |
0e27aa3d | 740 | select FB_HECUBA |
aad09e51 | 741 | help |
0e27aa3d JK |
742 | This enables support for the Apollo display controller in its |
743 | Hecuba form using the n411 devkit. | |
aad09e51 | 744 | |
1da177e4 LT |
745 | config FB_HGA |
746 | tristate "Hercules mono graphics support" | |
747 | depends on FB && X86 | |
748 | select FB_CFB_FILLRECT | |
749 | select FB_CFB_COPYAREA | |
750 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
751 | help |
752 | Say Y here if you have a Hercules mono graphics card. | |
753 | ||
754 | To compile this driver as a module, choose M here: the | |
755 | module will be called hgafb. | |
756 | ||
757 | As this card technology is 15 years old, most people will answer N | |
758 | here. | |
759 | ||
760 | config FB_HGA_ACCEL | |
761 | bool "Hercules mono Acceleration functions (EXPERIMENTAL)" | |
762 | depends on FB_HGA && EXPERIMENTAL | |
763 | ---help--- | |
764 | This will compile the Hercules mono graphics with | |
765 | acceleration functions. | |
766 | ||
1da177e4 LT |
767 | config FB_SGIVW |
768 | tristate "SGI Visual Workstation framebuffer support" | |
769 | depends on FB && X86_VISWS | |
770 | select FB_CFB_FILLRECT | |
771 | select FB_CFB_COPYAREA | |
772 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
773 | help |
774 | SGI Visual Workstation support for framebuffer graphics. | |
775 | ||
776 | config FB_GBE | |
777 | bool "SGI Graphics Backend frame buffer support" | |
778 | depends on (FB = y) && (SGI_IP32 || X86_VISWS) | |
779 | select FB_CFB_FILLRECT | |
780 | select FB_CFB_COPYAREA | |
781 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
782 | help |
783 | This is the frame buffer device driver for SGI Graphics Backend. | |
784 | This chip is used in SGI O2 and Visual Workstation 320/540. | |
785 | ||
786 | config FB_GBE_MEM | |
787 | int "Video memory size in MB" | |
788 | depends on FB_GBE | |
80c410dc | 789 | default 4 |
1da177e4 LT |
790 | help |
791 | This is the amount of memory reserved for the framebuffer, | |
792 | which can be any value between 1MB and 8MB. | |
793 | ||
1a571986 MF |
794 | config FB_SBUS |
795 | bool "SBUS and UPA framebuffers" | |
0b57ee9e | 796 | depends on (FB = y) && SPARC |
1a571986 MF |
797 | help |
798 | Say Y if you want support for SBUS or UPA based frame buffer device. | |
799 | ||
1da177e4 LT |
800 | config FB_BW2 |
801 | bool "BWtwo support" | |
e019630e | 802 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
803 | select FB_CFB_FILLRECT |
804 | select FB_CFB_COPYAREA | |
805 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
806 | help |
807 | This is the frame buffer device driver for the BWtwo frame buffer. | |
808 | ||
809 | config FB_CG3 | |
810 | bool "CGthree support" | |
e019630e | 811 | depends on (FB = y) && (SPARC && FB_SBUS) |
1a571986 | 812 | select FB_CFB_FILLRECT |
1da177e4 LT |
813 | select FB_CFB_COPYAREA |
814 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
815 | help |
816 | This is the frame buffer device driver for the CGthree frame buffer. | |
817 | ||
818 | config FB_CG6 | |
819 | bool "CGsix (GX,TurboGX) support" | |
e019630e | 820 | depends on (FB = y) && (SPARC && FB_SBUS) |
1da177e4 LT |
821 | select FB_CFB_COPYAREA |
822 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
823 | help |
824 | This is the frame buffer device driver for the CGsix (GX, TurboGX) | |
825 | frame buffer. | |
826 | ||
8d74c1fd KH |
827 | config FB_FFB |
828 | bool "Creator/Creator3D/Elite3D support" | |
829 | depends on FB_SBUS && SPARC64 | |
830 | select FB_CFB_COPYAREA | |
831 | select FB_CFB_IMAGEBLIT | |
832 | help | |
833 | This is the frame buffer device driver for the Creator, Creator3D, | |
834 | and Elite3D graphics boards. | |
835 | ||
836 | config FB_TCX | |
837 | bool "TCX (SS4/SS5 only) support" | |
838 | depends on FB_SBUS | |
839 | select FB_CFB_FILLRECT | |
840 | select FB_CFB_COPYAREA | |
841 | select FB_CFB_IMAGEBLIT | |
842 | help | |
843 | This is the frame buffer device driver for the TCX 24/8bit frame | |
844 | buffer. | |
845 | ||
846 | config FB_CG14 | |
847 | bool "CGfourteen (SX) support" | |
848 | depends on FB_SBUS | |
849 | select FB_CFB_FILLRECT | |
850 | select FB_CFB_COPYAREA | |
851 | select FB_CFB_IMAGEBLIT | |
852 | help | |
853 | This is the frame buffer device driver for the CGfourteen frame | |
854 | buffer on Desktop SPARCsystems with the SX graphics option. | |
855 | ||
856 | config FB_P9100 | |
857 | bool "P9100 (Sparcbook 3 only) support" | |
858 | depends on FB_SBUS | |
859 | select FB_CFB_FILLRECT | |
860 | select FB_CFB_COPYAREA | |
861 | select FB_CFB_IMAGEBLIT | |
862 | help | |
863 | This is the frame buffer device driver for the P9100 card | |
864 | supported on Sparcbook 3 machines. | |
865 | ||
866 | config FB_LEO | |
867 | bool "Leo (ZX) support" | |
868 | depends on FB_SBUS | |
869 | select FB_CFB_FILLRECT | |
870 | select FB_CFB_COPYAREA | |
871 | select FB_CFB_IMAGEBLIT | |
872 | help | |
873 | This is the frame buffer device driver for the SBUS-based Sun ZX | |
874 | (leo) frame buffer cards. | |
875 | ||
876 | config FB_IGA | |
877 | bool "IGA 168x display support" | |
e11a6c23 | 878 | depends on (FB = y) && SPARC32 |
8d74c1fd KH |
879 | select FB_CFB_FILLRECT |
880 | select FB_CFB_COPYAREA | |
881 | select FB_CFB_IMAGEBLIT | |
882 | help | |
883 | This is the framebuffer device for the INTERGRAPHICS 1680 and | |
884 | successor frame buffer cards. | |
885 | ||
886 | config FB_XVR500 | |
887 | bool "Sun XVR-500 3DLABS Wildcat support" | |
e11a6c23 | 888 | depends on (FB = y) && PCI && SPARC64 |
8d74c1fd KH |
889 | select FB_CFB_FILLRECT |
890 | select FB_CFB_COPYAREA | |
891 | select FB_CFB_IMAGEBLIT | |
892 | help | |
893 | This is the framebuffer device for the Sun XVR-500 and similar | |
894 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
01dd2fbf | 895 | only works on sparc64 systems where the system firmware has |
8d74c1fd KH |
896 | mostly initialized the card already. It is treated as a |
897 | completely dumb framebuffer device. | |
898 | ||
899 | config FB_XVR2500 | |
900 | bool "Sun XVR-2500 3DLABS Wildcat support" | |
e11a6c23 | 901 | depends on (FB = y) && PCI && SPARC64 |
8d74c1fd KH |
902 | select FB_CFB_FILLRECT |
903 | select FB_CFB_COPYAREA | |
904 | select FB_CFB_IMAGEBLIT | |
905 | help | |
906 | This is the framebuffer device for the Sun XVR-2500 and similar | |
907 | graphics cards based upon the 3DLABS Wildcat chipset. The driver | |
01dd2fbf | 908 | only works on sparc64 systems where the system firmware has |
8d74c1fd KH |
909 | mostly initialized the card already. It is treated as a |
910 | completely dumb framebuffer device. | |
911 | ||
1da177e4 LT |
912 | config FB_PVR2 |
913 | tristate "NEC PowerVR 2 display support" | |
914 | depends on FB && SH_DREAMCAST | |
915 | select FB_CFB_FILLRECT | |
916 | select FB_CFB_COPYAREA | |
917 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
918 | ---help--- |
919 | Say Y here if you have a PowerVR 2 card in your box. If you plan to | |
920 | run linux on your Dreamcast, you will have to say Y here. | |
921 | This driver may or may not work on other PowerVR 2 cards, but is | |
922 | totally untested. Use at your own risk. If unsure, say N. | |
923 | ||
924 | To compile this driver as a module, choose M here: the | |
925 | module will be called pvr2fb. | |
926 | ||
927 | You can pass several parameters to the driver at boot time or at | |
928 | module load time. The parameters look like "video=pvr2:XXX", where | |
929 | the meaning of XXX can be found at the end of the main source file | |
930 | (<file:drivers/video/pvr2fb.c>). Please see the file | |
931 | <file:Documentation/fb/pvr2fb.txt>. | |
932 | ||
933 | config FB_EPSON1355 | |
934 | bool "Epson 1355 framebuffer support" | |
1a3f2881 | 935 | depends on (FB = y) && ARCH_CEIVA |
1da177e4 LT |
936 | select FB_CFB_FILLRECT |
937 | select FB_CFB_COPYAREA | |
938 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
939 | help |
940 | Build in support for the SED1355 Epson Research Embedded RAMDAC | |
941 | LCD/CRT Controller (since redesignated as the S1D13505) as a | |
942 | framebuffer. Product specs at | |
943 | <http://www.erd.epson.com/vdc/html/products.htm>. | |
944 | ||
ecc41d5e RD |
945 | config FB_S1D13XXX |
946 | tristate "Epson S1D13XXX framebuffer support" | |
947 | depends on FB | |
948 | select FB_CFB_FILLRECT | |
949 | select FB_CFB_COPYAREA | |
950 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
951 | help |
952 | Support for S1D13XXX framebuffer device family (currently only | |
953 | working with S1D13806). Product specs at | |
954 | <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> | |
955 | ||
14340586 NF |
956 | config FB_ATMEL |
957 | tristate "AT91/AT32 LCD Controller support" | |
0912e535 | 958 | depends on FB && HAVE_FB_ATMEL |
14340586 NF |
959 | select FB_CFB_FILLRECT |
960 | select FB_CFB_COPYAREA | |
961 | select FB_CFB_IMAGEBLIT | |
962 | help | |
963 | This enables support for the AT91/AT32 LCD Controller. | |
964 | ||
965 | config FB_INTSRAM | |
966 | bool "Frame Buffer in internal SRAM" | |
967 | depends on FB_ATMEL && ARCH_AT91SAM9261 | |
968 | help | |
969 | Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want | |
970 | to let frame buffer in external SDRAM. | |
971 | ||
250a269d NF |
972 | config FB_ATMEL_STN |
973 | bool "Use a STN display with AT91/AT32 LCD Controller" | |
915190f7 | 974 | depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK) |
250a269d NF |
975 | default n |
976 | help | |
977 | Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD | |
978 | Controller. Say N if you want to connect a TFT. | |
979 | ||
980 | If unsure, say N. | |
981 | ||
1da177e4 LT |
982 | config FB_NVIDIA |
983 | tristate "nVidia Framebuffer Support" | |
984 | depends on FB && PCI | |
e0e34ef7 | 985 | select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT |
1da177e4 LT |
986 | select FB_MODE_HELPERS |
987 | select FB_CFB_FILLRECT | |
988 | select FB_CFB_COPYAREA | |
989 | select FB_CFB_IMAGEBLIT | |
1c667682 | 990 | select BITREVERSE |
b2f594fd | 991 | select VGASTATE |
1da177e4 LT |
992 | help |
993 | This driver supports graphics boards with the nVidia chips, TNT | |
994 | and newer. For very old chipsets, such as the RIVA128, then use | |
995 | the rivafb. | |
996 | Say Y if you have such a graphics board. | |
997 | ||
998 | To compile this driver as a module, choose M here: the | |
999 | module will be called nvidiafb. | |
1000 | ||
1001 | config FB_NVIDIA_I2C | |
1002 | bool "Enable DDC Support" | |
85f1503a | 1003 | depends on FB_NVIDIA |
166f60dd | 1004 | select FB_DDC |
1da177e4 LT |
1005 | help |
1006 | This enables I2C support for nVidia Chipsets. This is used | |
1007 | only for getting EDID information from the attached display | |
1008 | allowing for robust video mode handling and switching. | |
1009 | ||
1010 | Because fbdev-2.6 requires that drivers must be able to | |
1011 | independently validate video mode parameters, you should say Y | |
1012 | here. | |
1013 | ||
647f2e7a JD |
1014 | config FB_NVIDIA_DEBUG |
1015 | bool "Lots of debug output" | |
1016 | depends on FB_NVIDIA | |
1017 | default n | |
1018 | help | |
1019 | Say Y here if you want the nVidia driver to output all sorts | |
1020 | of debugging information to provide to the maintainer when | |
1021 | something goes wrong. | |
1022 | ||
5474c120 MH |
1023 | config FB_NVIDIA_BACKLIGHT |
1024 | bool "Support for backlight control" | |
e0e34ef7 | 1025 | depends on FB_NVIDIA |
5474c120 MH |
1026 | default y |
1027 | help | |
1028 | Say Y here if you want to control the backlight of your display. | |
1029 | ||
1da177e4 LT |
1030 | config FB_RIVA |
1031 | tristate "nVidia Riva support" | |
1032 | depends on FB && PCI | |
e0e34ef7 | 1033 | select FB_BACKLIGHT if FB_RIVA_BACKLIGHT |
1da177e4 LT |
1034 | select FB_MODE_HELPERS |
1035 | select FB_CFB_FILLRECT | |
1036 | select FB_CFB_COPYAREA | |
1037 | select FB_CFB_IMAGEBLIT | |
1c667682 | 1038 | select BITREVERSE |
b2f594fd | 1039 | select VGASTATE |
1da177e4 LT |
1040 | help |
1041 | This driver supports graphics boards with the nVidia Riva/Geforce | |
1042 | chips. | |
1043 | Say Y if you have such a graphics board. | |
1044 | ||
1045 | To compile this driver as a module, choose M here: the | |
1046 | module will be called rivafb. | |
1047 | ||
1048 | config FB_RIVA_I2C | |
1049 | bool "Enable DDC Support" | |
1050 | depends on FB_RIVA | |
166f60dd | 1051 | select FB_DDC |
1da177e4 LT |
1052 | help |
1053 | This enables I2C support for nVidia Chipsets. This is used | |
1054 | only for getting EDID information from the attached display | |
1055 | allowing for robust video mode handling and switching. | |
1056 | ||
1057 | Because fbdev-2.6 requires that drivers must be able to | |
1058 | independently validate video mode parameters, you should say Y | |
1059 | here. | |
1060 | ||
1061 | config FB_RIVA_DEBUG | |
647f2e7a | 1062 | bool "Lots of debug output" |
1da177e4 LT |
1063 | depends on FB_RIVA |
1064 | default n | |
1065 | help | |
1066 | Say Y here if you want the Riva driver to output all sorts | |
09509603 | 1067 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1068 | something goes wrong. |
1069 | ||
5474c120 MH |
1070 | config FB_RIVA_BACKLIGHT |
1071 | bool "Support for backlight control" | |
e0e34ef7 | 1072 | depends on FB_RIVA |
5474c120 MH |
1073 | default y |
1074 | help | |
1075 | Say Y here if you want to control the backlight of your display. | |
1076 | ||
1da177e4 LT |
1077 | config FB_I810 |
1078 | tristate "Intel 810/815 support (EXPERIMENTAL)" | |
a1a5c3b9 | 1079 | depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL |
1da177e4 LT |
1080 | select FB_MODE_HELPERS |
1081 | select FB_CFB_FILLRECT | |
1082 | select FB_CFB_COPYAREA | |
1083 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1084 | select VGASTATE |
1da177e4 LT |
1085 | help |
1086 | This driver supports the on-board graphics built in to the Intel 810 | |
1087 | and 815 chipsets. Say Y if you have and plan to use such a board. | |
1088 | ||
1089 | To compile this driver as a module, choose M here: the | |
1090 | module will be called i810fb. | |
1091 | ||
1092 | For more information, please read | |
1093 | <file:Documentation/fb/intel810.txt> | |
1094 | ||
1095 | config FB_I810_GTF | |
1096 | bool "use VESA Generalized Timing Formula" | |
1097 | depends on FB_I810 | |
1098 | help | |
1099 | If you say Y, then the VESA standard, Generalized Timing Formula | |
1100 | or GTF, will be used to calculate the required video timing values | |
1101 | per video mode. Since the GTF allows nondiscrete timings | |
1102 | (nondiscrete being a range of values as opposed to discrete being a | |
1103 | set of values), you'll be able to use any combination of horizontal | |
1104 | and vertical resolutions, and vertical refresh rates without having | |
1105 | to specify your own timing parameters. This is especially useful | |
1106 | to maximize the performance of an aging display, or if you just | |
1107 | have a display with nonstandard dimensions. A VESA compliant | |
1108 | monitor is recommended, but can still work with non-compliant ones. | |
1109 | If you need or want this, then select this option. The timings may | |
1110 | not be compliant with Intel's recommended values. Use at your own | |
1111 | risk. | |
1112 | ||
1113 | If you say N, the driver will revert to discrete video timings | |
1114 | using a set recommended by Intel in their documentation. | |
1115 | ||
1116 | If unsure, say N. | |
1117 | ||
74f6ae84 AD |
1118 | config FB_I810_I2C |
1119 | bool "Enable DDC Support" | |
db84502b | 1120 | depends on FB_I810 && FB_I810_GTF |
e80987f8 | 1121 | select FB_DDC |
74f6ae84 AD |
1122 | help |
1123 | ||
dbe7e429 AH |
1124 | config FB_LE80578 |
1125 | tristate "Intel LE80578 (Vermilion) support" | |
1126 | depends on FB && PCI && X86 | |
1127 | select FB_MODE_HELPERS | |
1128 | select FB_CFB_FILLRECT | |
1129 | select FB_CFB_COPYAREA | |
1130 | select FB_CFB_IMAGEBLIT | |
1131 | help | |
1132 | This driver supports the LE80578 (Vermilion Range) chipset | |
1133 | ||
1134 | config FB_CARILLO_RANCH | |
1135 | tristate "Intel Carillo Ranch support" | |
1136 | depends on FB_LE80578 && FB && PCI && X86 | |
1137 | help | |
1138 | This driver supports the LE80578 (Carillo Ranch) board | |
1139 | ||
1da177e4 | 1140 | config FB_INTEL |
0e170c72 | 1141 | tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" |
ba0ab823 | 1142 | depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED |
1da177e4 LT |
1143 | select FB_MODE_HELPERS |
1144 | select FB_CFB_FILLRECT | |
1145 | select FB_CFB_COPYAREA | |
1146 | select FB_CFB_IMAGEBLIT | |
4b198289 | 1147 | select FB_BOOT_VESA_SUPPORT if FB_INTEL = y |
ba0ab823 | 1148 | depends on !DRM_I915 |
1da177e4 LT |
1149 | help |
1150 | This driver supports the on-board graphics built in to the Intel | |
0e170c72 | 1151 | 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. |
1da177e4 LT |
1152 | Say Y if you have and plan to use such a board. |
1153 | ||
4b198289 KH |
1154 | To make FB_INTELFB=Y work you need to say AGP_INTEL=y too. |
1155 | ||
1f6e8449 | 1156 | To compile this driver as a module, choose M here: the |
1da177e4 LT |
1157 | module will be called intelfb. |
1158 | ||
d463d34e CM |
1159 | For more information, please read <file:Documentation/fb/intelfb.txt> |
1160 | ||
1da177e4 | 1161 | config FB_INTEL_DEBUG |
1f6e8449 | 1162 | bool "Intel driver Debug Messages" |
1da177e4 LT |
1163 | depends on FB_INTEL |
1164 | ---help--- | |
1165 | Say Y here if you want the Intel driver to output all sorts | |
09509603 | 1166 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1167 | something goes wrong. |
1168 | ||
1f6e8449 DM |
1169 | config FB_INTEL_I2C |
1170 | bool "DDC/I2C for Intel framebuffer support" | |
1171 | depends on FB_INTEL | |
166f60dd | 1172 | select FB_DDC |
1f6e8449 DM |
1173 | default y |
1174 | help | |
1175 | Say Y here if you want DDC/I2C support for your on-board Intel graphics. | |
1176 | ||
1da177e4 LT |
1177 | config FB_MATROX |
1178 | tristate "Matrox acceleration" | |
1179 | depends on FB && PCI | |
1180 | select FB_CFB_FILLRECT | |
1181 | select FB_CFB_COPYAREA | |
1182 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1183 | select FB_TILEBLITTING |
1184 | select FB_MACMODES if PPC_PMAC | |
1185 | ---help--- | |
1186 | Say Y here if you have a Matrox Millennium, Matrox Millennium II, | |
1187 | Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox | |
1188 | Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, | |
1189 | Matrox G400, G450 or G550 card in your box. | |
1190 | ||
1191 | To compile this driver as a module, choose M here: the | |
1192 | module will be called matroxfb. | |
1193 | ||
1194 | You can pass several parameters to the driver at boot time or at | |
1195 | module load time. The parameters look like "video=matrox:XXX", and | |
1196 | are described in <file:Documentation/fb/matroxfb.txt>. | |
1197 | ||
1198 | config FB_MATROX_MILLENIUM | |
1199 | bool "Millennium I/II support" | |
1200 | depends on FB_MATROX | |
1201 | help | |
1202 | Say Y here if you have a Matrox Millennium or Matrox Millennium II | |
1203 | video card. If you select "Advanced lowlevel driver options" below, | |
1204 | you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp | |
1205 | packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can | |
1206 | also use font widths different from 8. | |
1207 | ||
1208 | config FB_MATROX_MYSTIQUE | |
1209 | bool "Mystique support" | |
1210 | depends on FB_MATROX | |
1211 | help | |
1212 | Say Y here if you have a Matrox Mystique or Matrox Mystique 220 | |
1213 | video card. If you select "Advanced lowlevel driver options" below, | |
1214 | you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp | |
1215 | packed pixel and 32 bpp packed pixel. You can also use font widths | |
1216 | different from 8. | |
1217 | ||
1218 | config FB_MATROX_G | |
1219 | bool "G100/G200/G400/G450/G550 support" | |
1220 | depends on FB_MATROX | |
1221 | ---help--- | |
1222 | Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based | |
1223 | video card. If you select "Advanced lowlevel driver options", you | |
1224 | should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed | |
1225 | pixel and 32 bpp packed pixel. You can also use font widths | |
1226 | different from 8. | |
1227 | ||
ee83126b JD |
1228 | If you need support for G400 secondary head, you must say Y to |
1229 | "Matrox I2C support" and "G400 second head support" right below. | |
1230 | G450/G550 secondary head and digital output are supported without | |
1231 | additional modules. | |
1da177e4 LT |
1232 | |
1233 | The driver starts in monitor mode. You must use the matroxset tool | |
1234 | (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to | |
1235 | swap primary and secondary head outputs, or to change output mode. | |
1236 | Secondary head driver always start in 640x480 resolution and you | |
1237 | must use fbset to change it. | |
1238 | ||
1239 | Do not forget that second head supports only 16 and 32 bpp | |
1240 | packed pixels, so it is a good idea to compile them into the kernel | |
1241 | too. You can use only some font widths, as the driver uses generic | |
1242 | painting procedures (the secondary head does not use acceleration | |
1243 | engine). | |
1244 | ||
1245 | G450/G550 hardware can display TV picture only from secondary CRTC, | |
1246 | and it performs no scaling, so picture must have 525 or 625 lines. | |
1247 | ||
1248 | config FB_MATROX_I2C | |
1249 | tristate "Matrox I2C support" | |
166f60dd JS |
1250 | depends on FB_MATROX |
1251 | select FB_DDC | |
1da177e4 LT |
1252 | ---help--- |
1253 | This drivers creates I2C buses which are needed for accessing the | |
1254 | DDC (I2C) bus present on all Matroxes, an I2C bus which | |
1255 | interconnects Matrox optional devices, like MGA-TVO on G200 and | |
1256 | G400, and the secondary head DDC bus, present on G400 only. | |
1257 | ||
1258 | You can say Y or M here if you want to experiment with monitor | |
1259 | detection code. You must say Y or M here if you want to use either | |
1260 | second head of G400 or MGA-TVO on G200 or G400. | |
1261 | ||
1262 | If you compile it as module, it will create a module named | |
1263 | i2c-matroxfb. | |
1264 | ||
1265 | config FB_MATROX_MAVEN | |
1266 | tristate "G400 second head support" | |
1267 | depends on FB_MATROX_G && FB_MATROX_I2C | |
1268 | ---help--- | |
1269 | WARNING !!! This support does not work with G450 !!! | |
1270 | ||
1271 | Say Y or M here if you want to use a secondary head (meaning two | |
1272 | monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary | |
1273 | head is not compatible with accelerated XFree 3.3.x SVGA servers - | |
1274 | secondary head output is blanked while you are in X. With XFree | |
1275 | 3.9.17 preview you can use both heads if you use SVGA over fbdev or | |
1276 | the fbdev driver on first head and the fbdev driver on second head. | |
1277 | ||
1278 | If you compile it as module, two modules are created, | |
1279 | matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for | |
1280 | both G200 and G400, matroxfb_crtc2 is needed only by G400. You must | |
1281 | also load i2c-matroxfb to get it to run. | |
1282 | ||
1283 | The driver starts in monitor mode and you must use the matroxset | |
1284 | tool (available at | |
1285 | <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to | |
1286 | PAL or NTSC or to swap primary and secondary head outputs. | |
1287 | Secondary head driver also always start in 640x480 resolution, you | |
1288 | must use fbset to change it. | |
1289 | ||
1290 | Also do not forget that second head supports only 16 and 32 bpp | |
1291 | packed pixels, so it is a good idea to compile them into the kernel | |
1292 | too. You can use only some font widths, as the driver uses generic | |
1293 | painting procedures (the secondary head does not use acceleration | |
1294 | engine). | |
1295 | ||
1da177e4 LT |
1296 | config FB_RADEON |
1297 | tristate "ATI Radeon display support" | |
1298 | depends on FB && PCI | |
e0e34ef7 | 1299 | select FB_BACKLIGHT if FB_RADEON_BACKLIGHT |
1da177e4 LT |
1300 | select FB_MODE_HELPERS |
1301 | select FB_CFB_FILLRECT | |
1302 | select FB_CFB_COPYAREA | |
1303 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1304 | select FB_MACMODES if PPC_OF |
1305 | help | |
1306 | Choose this option if you want to use an ATI Radeon graphics card as | |
1307 | a framebuffer device. There are both PCI and AGP versions. You | |
1308 | don't need to choose this to run the Radeon in plain VGA mode. | |
1309 | ||
1da177e4 | 1310 | There is a product page at |
f510a3c3 | 1311 | http://apps.ati.com/ATIcompare/ |
5474c120 | 1312 | |
1da177e4 LT |
1313 | config FB_RADEON_I2C |
1314 | bool "DDC/I2C for ATI Radeon support" | |
1315 | depends on FB_RADEON | |
166f60dd | 1316 | select FB_DDC |
1da177e4 LT |
1317 | default y |
1318 | help | |
1319 | Say Y here if you want DDC/I2C support for your Radeon board. | |
1320 | ||
5474c120 MH |
1321 | config FB_RADEON_BACKLIGHT |
1322 | bool "Support for backlight control" | |
e0e34ef7 | 1323 | depends on FB_RADEON |
5474c120 MH |
1324 | default y |
1325 | help | |
1326 | Say Y here if you want to control the backlight of your display. | |
1327 | ||
1da177e4 LT |
1328 | config FB_RADEON_DEBUG |
1329 | bool "Lots of debug output from Radeon driver" | |
1330 | depends on FB_RADEON | |
1331 | default n | |
1332 | help | |
1333 | Say Y here if you want the Radeon driver to output all sorts | |
09509603 | 1334 | of debugging information to provide to the maintainer when |
1da177e4 LT |
1335 | something goes wrong. |
1336 | ||
1337 | config FB_ATY128 | |
1338 | tristate "ATI Rage128 display support" | |
1339 | depends on FB && PCI | |
1340 | select FB_CFB_FILLRECT | |
1341 | select FB_CFB_COPYAREA | |
1342 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1343 | select FB_BACKLIGHT if FB_ATY128_BACKLIGHT |
1da177e4 LT |
1344 | select FB_MACMODES if PPC_PMAC |
1345 | help | |
1346 | This driver supports graphics boards with the ATI Rage128 chips. | |
1347 | Say Y if you have such a graphics board and read | |
1348 | <file:Documentation/fb/aty128fb.txt>. | |
1349 | ||
1350 | To compile this driver as a module, choose M here: the | |
1351 | module will be called aty128fb. | |
1352 | ||
5474c120 MH |
1353 | config FB_ATY128_BACKLIGHT |
1354 | bool "Support for backlight control" | |
e0e34ef7 | 1355 | depends on FB_ATY128 |
5474c120 MH |
1356 | default y |
1357 | help | |
1358 | Say Y here if you want to control the backlight of your display. | |
1359 | ||
1da177e4 LT |
1360 | config FB_ATY |
1361 | tristate "ATI Mach64 display support" if PCI || ATARI | |
f2e782ef | 1362 | depends on FB && !SPARC32 |
1da177e4 LT |
1363 | select FB_CFB_FILLRECT |
1364 | select FB_CFB_COPYAREA | |
1365 | select FB_CFB_IMAGEBLIT | |
e0e34ef7 | 1366 | select FB_BACKLIGHT if FB_ATY_BACKLIGHT |
1da177e4 LT |
1367 | select FB_MACMODES if PPC |
1368 | help | |
1369 | This driver supports graphics boards with the ATI Mach64 chips. | |
1370 | Say Y if you have such a graphics board. | |
1371 | ||
1372 | To compile this driver as a module, choose M here: the | |
1373 | module will be called atyfb. | |
1374 | ||
1375 | config FB_ATY_CT | |
1376 | bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" | |
1377 | depends on PCI && FB_ATY | |
8d74c1fd | 1378 | default y if SPARC64 && PCI |
1da177e4 LT |
1379 | help |
1380 | Say Y here to support use of ATI's 64-bit Rage boards (or other | |
1381 | boards based on the Mach64 CT, VT, GT, and LT chipsets) as a | |
1382 | framebuffer device. The ATI product support page for these boards | |
1383 | is at <http://support.ati.com/products/pc/mach64/>. | |
1384 | ||
1385 | config FB_ATY_GENERIC_LCD | |
1386 | bool "Mach64 generic LCD support (EXPERIMENTAL)" | |
1387 | depends on FB_ATY_CT | |
1388 | help | |
1389 | Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, | |
1390 | Rage XC, or Rage XL chipset. | |
1391 | ||
1da177e4 LT |
1392 | config FB_ATY_GX |
1393 | bool "Mach64 GX support" if PCI | |
1394 | depends on FB_ATY | |
1395 | default y if ATARI | |
1396 | help | |
1397 | Say Y here to support use of the ATI Mach64 Graphics Expression | |
1398 | board (or other boards based on the Mach64 GX chipset) as a | |
1399 | framebuffer device. The ATI product support page for these boards | |
1400 | is at | |
1401 | <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. | |
1402 | ||
5474c120 MH |
1403 | config FB_ATY_BACKLIGHT |
1404 | bool "Support for backlight control" | |
e0e34ef7 | 1405 | depends on FB_ATY |
5474c120 MH |
1406 | default y |
1407 | help | |
1408 | Say Y here if you want to control the backlight of your display. | |
1409 | ||
a268422d OZ |
1410 | config FB_S3 |
1411 | tristate "S3 Trio/Virge support" | |
1412 | depends on FB && PCI | |
1413 | select FB_CFB_FILLRECT | |
1414 | select FB_CFB_COPYAREA | |
1415 | select FB_CFB_IMAGEBLIT | |
1416 | select FB_TILEBLITTING | |
1417 | select FB_SVGALIB | |
b2f594fd | 1418 | select VGASTATE |
8db51668 | 1419 | select FONT_8x16 if FRAMEBUFFER_CONSOLE |
a268422d OZ |
1420 | ---help--- |
1421 | Driver for graphics boards with S3 Trio / S3 Virge chip. | |
1422 | ||
1da177e4 LT |
1423 | config FB_SAVAGE |
1424 | tristate "S3 Savage support" | |
1425 | depends on FB && PCI && EXPERIMENTAL | |
1da177e4 LT |
1426 | select FB_MODE_HELPERS |
1427 | select FB_CFB_FILLRECT | |
1428 | select FB_CFB_COPYAREA | |
1429 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1430 | select VGASTATE |
1da177e4 LT |
1431 | help |
1432 | This driver supports notebooks and computers with S3 Savage PCI/AGP | |
1433 | chips. | |
1434 | ||
1435 | Say Y if you have such a graphics card. | |
1436 | ||
1437 | To compile this driver as a module, choose M here; the module | |
1438 | will be called savagefb. | |
1439 | ||
1440 | config FB_SAVAGE_I2C | |
1441 | bool "Enable DDC2 Support" | |
1442 | depends on FB_SAVAGE | |
166f60dd | 1443 | select FB_DDC |
1da177e4 LT |
1444 | help |
1445 | This enables I2C support for S3 Savage Chipsets. This is used | |
1446 | only for getting EDID information from the attached display | |
1447 | allowing for robust video mode handling and switching. | |
1448 | ||
1449 | Because fbdev-2.6 requires that drivers must be able to | |
1450 | independently validate video mode parameters, you should say Y | |
1451 | here. | |
1452 | ||
1453 | config FB_SAVAGE_ACCEL | |
1454 | bool "Enable Console Acceleration" | |
1455 | depends on FB_SAVAGE | |
1456 | default n | |
1457 | help | |
1458 | This option will compile in console acceleration support. If | |
1459 | the resulting framebuffer console has bothersome glitches, then | |
1460 | choose N here. | |
1461 | ||
1462 | config FB_SIS | |
544393fe | 1463 | tristate "SiS/XGI display support" |
1da177e4 LT |
1464 | depends on FB && PCI |
1465 | select FB_CFB_FILLRECT | |
1466 | select FB_CFB_COPYAREA | |
1467 | select FB_CFB_IMAGEBLIT | |
4b198289 | 1468 | select FB_BOOT_VESA_SUPPORT if FB_SIS = y |
1da177e4 | 1469 | help |
544393fe TW |
1470 | This is the frame buffer device driver for the SiS 300, 315, 330 |
1471 | and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. | |
1472 | Specs available at <http://www.sis.com> and <http://www.xgitech.com>. | |
1da177e4 LT |
1473 | |
1474 | To compile this driver as a module, choose M here; the module | |
1475 | will be called sisfb. | |
1476 | ||
1477 | config FB_SIS_300 | |
1478 | bool "SiS 300 series support" | |
1479 | depends on FB_SIS | |
1480 | help | |
1481 | Say Y here to support use of the SiS 300/305, 540, 630 and 730. | |
1482 | ||
1483 | config FB_SIS_315 | |
544393fe | 1484 | bool "SiS 315/330/340 series and XGI support" |
1da177e4 LT |
1485 | depends on FB_SIS |
1486 | help | |
544393fe TW |
1487 | Say Y here to support use of the SiS 315, 330 and 340 series |
1488 | (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well | |
1489 | as XGI V3XT, V5, V8 and Z7. | |
1da177e4 | 1490 | |
6bde3ed9 JC |
1491 | config FB_VIA |
1492 | tristate "VIA UniChrome (Pro) and Chrome9 display support" | |
1493 | depends on FB && PCI | |
1494 | select FB_CFB_FILLRECT | |
1495 | select FB_CFB_COPYAREA | |
1496 | select FB_CFB_IMAGEBLIT | |
1497 | select FB_SOFT_CURSOR | |
1498 | select I2C_ALGOBIT | |
1499 | select I2C | |
1500 | help | |
1501 | This is the frame buffer device driver for Graphics chips of VIA | |
1502 | UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/ | |
1503 | CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896 | |
1504 | /P4M900,VX800) | |
1505 | Say Y if you have a VIA UniChrome graphics board. | |
1506 | ||
1507 | To compile this driver as a module, choose M here: the | |
1508 | module will be called viafb. | |
1da177e4 LT |
1509 | config FB_NEOMAGIC |
1510 | tristate "NeoMagic display support" | |
1511 | depends on FB && PCI | |
1512 | select FB_MODE_HELPERS | |
1513 | select FB_CFB_FILLRECT | |
1514 | select FB_CFB_COPYAREA | |
1515 | select FB_CFB_IMAGEBLIT | |
b2f594fd | 1516 | select VGASTATE |
1da177e4 LT |
1517 | help |
1518 | This driver supports notebooks with NeoMagic PCI chips. | |
1519 | Say Y if you have such a graphics card. | |
1520 | ||
1521 | To compile this driver as a module, choose M here: the | |
1522 | module will be called neofb. | |
1523 | ||
1524 | config FB_KYRO | |
1525 | tristate "IMG Kyro support" | |
1526 | depends on FB && PCI | |
1527 | select FB_CFB_FILLRECT | |
1528 | select FB_CFB_COPYAREA | |
1529 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1530 | help |
1531 | Say Y here if you have a STG4000 / Kyro / PowerVR 3 based | |
1532 | graphics board. | |
1533 | ||
1534 | To compile this driver as a module, choose M here: the | |
1535 | module will be called kyrofb. | |
1536 | ||
1537 | config FB_3DFX | |
4edad7f0 | 1538 | tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support" |
1da177e4 LT |
1539 | depends on FB && PCI |
1540 | select FB_CFB_IMAGEBLIT | |
1541 | select FB_CFB_FILLRECT | |
1542 | select FB_CFB_COPYAREA | |
feff3880 | 1543 | select FB_MODE_HELPERS |
1da177e4 | 1544 | help |
4edad7f0 KH |
1545 | This driver supports graphics boards with the 3Dfx Banshee, |
1546 | Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have | |
1547 | such a graphics board. | |
1da177e4 LT |
1548 | |
1549 | To compile this driver as a module, choose M here: the | |
1550 | module will be called tdfxfb. | |
1551 | ||
1552 | config FB_3DFX_ACCEL | |
4edad7f0 | 1553 | bool "3Dfx Acceleration functions (EXPERIMENTAL)" |
1da177e4 LT |
1554 | depends on FB_3DFX && EXPERIMENTAL |
1555 | ---help--- | |
4edad7f0 KH |
1556 | This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer |
1557 | device driver with acceleration functions. | |
1da177e4 | 1558 | |
feff3880 KH |
1559 | config FB_3DFX_I2C |
1560 | bool "Enable DDC/I2C support" | |
1561 | depends on FB_3DFX && EXPERIMENTAL | |
1562 | select FB_DDC | |
1563 | default y | |
1564 | help | |
1565 | Say Y here if you want DDC/I2C support for your 3dfx Voodoo3. | |
1566 | ||
1da177e4 LT |
1567 | config FB_VOODOO1 |
1568 | tristate "3Dfx Voodoo Graphics (sst1) support" | |
1569 | depends on FB && PCI | |
1570 | select FB_CFB_FILLRECT | |
1571 | select FB_CFB_COPYAREA | |
1572 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1573 | ---help--- |
1574 | Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or | |
1575 | Voodoo2 (cvg) based graphics card. | |
1576 | ||
1577 | To compile this driver as a module, choose M here: the | |
1578 | module will be called sstfb. | |
1579 | ||
1580 | WARNING: Do not use any application that uses the 3D engine | |
1581 | (namely glide) while using this driver. | |
e403149c | 1582 | Please read the <file:Documentation/fb/sstfb.txt> for supported |
1da177e4 LT |
1583 | options and other important info support. |
1584 | ||
558b7bd8 OZ |
1585 | config FB_VT8623 |
1586 | tristate "VIA VT8623 support" | |
1587 | depends on FB && PCI | |
1588 | select FB_CFB_FILLRECT | |
1589 | select FB_CFB_COPYAREA | |
1590 | select FB_CFB_IMAGEBLIT | |
1591 | select FB_TILEBLITTING | |
1592 | select FB_SVGALIB | |
1593 | select VGASTATE | |
1594 | select FONT_8x16 if FRAMEBUFFER_CONSOLE | |
1595 | ---help--- | |
1596 | Driver for CastleRock integrated graphics core in the | |
1597 | VIA VT8623 [Apollo CLE266] chipset. | |
1598 | ||
1da177e4 | 1599 | config FB_TRIDENT |
04645fc3 | 1600 | tristate "Trident/CyberXXX/CyberBlade support" |
1da177e4 LT |
1601 | depends on FB && PCI |
1602 | select FB_CFB_FILLRECT | |
1603 | select FB_CFB_COPYAREA | |
1604 | select FB_CFB_IMAGEBLIT | |
1da177e4 | 1605 | ---help--- |
4edad7f0 KH |
1606 | This is the frame buffer device driver for Trident PCI/AGP chipsets. |
1607 | Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D | |
1608 | and Blade XP. | |
1609 | There are also integrated versions of these chips called CyberXXXX, | |
1610 | CyberImage or CyberBlade. These chips are mostly found in laptops | |
ddb53d48 KH |
1611 | but also on some motherboards including early VIA EPIA motherboards. |
1612 | For more information, read <file:Documentation/fb/tridentfb.txt> | |
1da177e4 LT |
1613 | |
1614 | Say Y if you have such a graphics board. | |
1615 | ||
1616 | To compile this driver as a module, choose M here: the | |
1617 | module will be called tridentfb. | |
1618 | ||
681e1473 OZ |
1619 | config FB_ARK |
1620 | tristate "ARK 2000PV support" | |
1621 | depends on FB && PCI | |
1622 | select FB_CFB_FILLRECT | |
1623 | select FB_CFB_COPYAREA | |
1624 | select FB_CFB_IMAGEBLIT | |
1625 | select FB_TILEBLITTING | |
1626 | select FB_SVGALIB | |
1627 | select VGASTATE | |
1628 | select FONT_8x16 if FRAMEBUFFER_CONSOLE | |
1629 | ---help--- | |
1630 | Driver for PCI graphics boards with ARK 2000PV chip | |
1631 | and ICS 5342 RAMDAC. | |
1632 | ||
1da177e4 | 1633 | config FB_PM3 |
f23a06f0 KH |
1634 | tristate "Permedia3 support (EXPERIMENTAL)" |
1635 | depends on FB && PCI && EXPERIMENTAL | |
1636 | select FB_CFB_FILLRECT | |
1637 | select FB_CFB_COPYAREA | |
1638 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1639 | help |
1640 | This is the frame buffer device driver for the 3DLabs Permedia3 | |
1641 | chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & | |
1642 | similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 | |
1643 | and maybe other boards. | |
1644 | ||
2ece5f43 SS |
1645 | config FB_CARMINE |
1646 | tristate "Fujitsu carmine frame buffer support" | |
1647 | depends on FB && PCI | |
1648 | select FB_CFB_FILLRECT | |
1649 | select FB_CFB_COPYAREA | |
1650 | select FB_CFB_IMAGEBLIT | |
1651 | help | |
1652 | This is the frame buffer device driver for the Fujitsu Carmine chip. | |
1653 | The driver provides two independent frame buffer devices. | |
1654 | ||
1655 | choice | |
1656 | depends on FB_CARMINE | |
1657 | prompt "DRAM timing" | |
1658 | default FB_CARMINE_DRAM_EVAL | |
1659 | ||
1660 | config FB_CARMINE_DRAM_EVAL | |
1661 | bool "Eval board timings" | |
1662 | help | |
1663 | Use timings which work on the eval card. | |
1664 | ||
1665 | config CARMINE_DRAM_CUSTOM | |
1666 | bool "Custom board timings" | |
1667 | help | |
1668 | Use custom board timings. | |
1669 | endchoice | |
1670 | ||
1da177e4 LT |
1671 | config FB_AU1100 |
1672 | bool "Au1100 LCD Driver" | |
d1709e47 RB |
1673 | depends on (FB = y) && MIPS && SOC_AU1100 |
1674 | select FB_CFB_FILLRECT | |
1675 | select FB_CFB_COPYAREA | |
1676 | select FB_CFB_IMAGEBLIT | |
1677 | help | |
1678 | This is the framebuffer driver for the AMD Au1100 SOC. It can drive | |
1679 | various panels and CRTs by passing in kernel cmd line option | |
1680 | au1100fb:panel=<name>. | |
1da177e4 | 1681 | |
f95ec3c6 RB |
1682 | config FB_AU1200 |
1683 | bool "Au1200 LCD Driver" | |
833f8062 | 1684 | depends on (FB = y) && MIPS && SOC_AU1200 |
f95ec3c6 RB |
1685 | select FB_CFB_FILLRECT |
1686 | select FB_CFB_COPYAREA | |
1687 | select FB_CFB_IMAGEBLIT | |
1688 | help | |
1689 | This is the framebuffer driver for the AMD Au1200 SOC. It can drive | |
1690 | various panels and CRTs by passing in kernel cmd line option | |
1691 | au1200fb:panel=<name>. | |
1692 | ||
1da177e4 LT |
1693 | source "drivers/video/geode/Kconfig" |
1694 | ||
1da177e4 LT |
1695 | config FB_HIT |
1696 | tristate "HD64461 Frame Buffer support" | |
1697 | depends on FB && HD64461 | |
1698 | select FB_CFB_FILLRECT | |
1699 | select FB_CFB_COPYAREA | |
1700 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1701 | help |
1702 | This is the frame buffer device driver for the Hitachi HD64461 LCD | |
1703 | frame buffer card. | |
1704 | ||
1705 | config FB_PMAG_AA | |
1706 | bool "PMAG-AA TURBOchannel framebuffer support" | |
a9350003 | 1707 | depends on (FB = y) && TC |
1da177e4 LT |
1708 | select FB_CFB_FILLRECT |
1709 | select FB_CFB_COPYAREA | |
1710 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1711 | help |
1712 | Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) | |
1713 | used mainly in the MIPS-based DECstation series. | |
1714 | ||
1715 | config FB_PMAG_BA | |
335dc50c MR |
1716 | tristate "PMAG-BA TURBOchannel framebuffer support" |
1717 | depends on FB && TC | |
1da177e4 LT |
1718 | select FB_CFB_FILLRECT |
1719 | select FB_CFB_COPYAREA | |
1720 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1721 | help |
1722 | Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) | |
1723 | used mainly in the MIPS-based DECstation series. | |
1724 | ||
1725 | config FB_PMAGB_B | |
9084b005 | 1726 | tristate "PMAGB-B TURBOchannel framebuffer support" |
28ea28a6 | 1727 | depends on FB && TC |
1da177e4 LT |
1728 | select FB_CFB_FILLRECT |
1729 | select FB_CFB_COPYAREA | |
1730 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1731 | help |
1732 | Support for the PMAGB-B TURBOchannel framebuffer card used mainly | |
1733 | in the MIPS-based DECstation series. The card is currently only | |
1734 | supported in 1280x1024x8 mode. | |
1735 | ||
1736 | config FB_MAXINE | |
1737 | bool "Maxine (Personal DECstation) onboard framebuffer support" | |
a9350003 | 1738 | depends on (FB = y) && MACH_DECSTATION |
1da177e4 LT |
1739 | select FB_CFB_FILLRECT |
1740 | select FB_CFB_COPYAREA | |
1741 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1742 | help |
1743 | Support for the onboard framebuffer (1024x768x8) in the Personal | |
1744 | DECstation series (Personal DECstation 5000/20, /25, /33, /50, | |
1745 | Codename "Maxine"). | |
1746 | ||
1da177e4 | 1747 | config FB_G364 |
b38817dd YY |
1748 | bool "G364 frame buffer support" |
1749 | depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) | |
1da177e4 LT |
1750 | select FB_CFB_FILLRECT |
1751 | select FB_CFB_COPYAREA | |
1752 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1753 | help |
1754 | The G364 driver is the framebuffer used in MIPS Magnum 4000 and | |
1755 | Olivetti M700-10 systems. | |
1756 | ||
1757 | config FB_68328 | |
1758 | bool "Motorola 68328 native frame buffer support" | |
833f8062 | 1759 | depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) |
1da177e4 LT |
1760 | select FB_CFB_FILLRECT |
1761 | select FB_CFB_COPYAREA | |
1762 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1763 | help |
1764 | Say Y here if you want to support the built-in frame buffer of | |
1765 | the Motorola 68328 CPU family. | |
1766 | ||
638772c7 LB |
1767 | config FB_PXA168 |
1768 | tristate "PXA168/910 LCD framebuffer support" | |
1769 | depends on FB && (CPU_PXA168 || CPU_PXA910) | |
1770 | select FB_CFB_FILLRECT | |
1771 | select FB_CFB_COPYAREA | |
1772 | select FB_CFB_IMAGEBLIT | |
1773 | ---help--- | |
1774 | Frame buffer driver for the built-in LCD controller in the Marvell | |
1775 | MMP processor. | |
1776 | ||
1da177e4 LT |
1777 | config FB_PXA |
1778 | tristate "PXA LCD framebuffer support" | |
1779 | depends on FB && ARCH_PXA | |
1780 | select FB_CFB_FILLRECT | |
1781 | select FB_CFB_COPYAREA | |
1782 | select FB_CFB_IMAGEBLIT | |
1da177e4 LT |
1783 | ---help--- |
1784 | Frame buffer driver for the built-in LCD controller in the Intel | |
1785 | PXA2x0 processor. | |
1786 | ||
1787 | This driver is also available as a module ( = code which can be | |
1788 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1789 | module will be called pxafb. If you want to compile it as a module, |
39f5fb30 | 1790 | say M here and read <file:Documentation/kbuild/modules.txt>. |
1da177e4 LT |
1791 | |
1792 | If unsure, say N. | |
1793 | ||
198fc108 EM |
1794 | config FB_PXA_OVERLAY |
1795 | bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer" | |
1796 | default n | |
1797 | depends on FB_PXA && (PXA27x || PXA3xx) | |
1798 | ||
3c42a449 EM |
1799 | config FB_PXA_SMARTPANEL |
1800 | bool "PXA Smartpanel LCD support" | |
7f1133cb | 1801 | default n |
3c42a449 EM |
1802 | depends on FB_PXA |
1803 | ||
1da177e4 LT |
1804 | config FB_PXA_PARAMETERS |
1805 | bool "PXA LCD command line parameters" | |
1806 | default n | |
1807 | depends on FB_PXA | |
1808 | ---help--- | |
1809 | Enable the use of kernel command line or module parameters | |
1810 | to configure the physical properties of the LCD panel when | |
1811 | using the PXA LCD driver. | |
1812 | ||
1813 | This option allows you to override the panel parameters | |
1814 | supplied by the platform in order to support multiple | |
1815 | different models of flatpanel. If you will only be using a | |
1816 | single model of flatpanel then you can safely leave this | |
1817 | option disabled. | |
1818 | ||
1819 | <file:Documentation/fb/pxafb.txt> describes the available parameters. | |
1820 | ||
22caf042 MR |
1821 | config FB_MBX |
1822 | tristate "2700G LCD framebuffer support" | |
1823 | depends on FB && ARCH_PXA | |
1824 | select FB_CFB_FILLRECT | |
1825 | select FB_CFB_COPYAREA | |
1826 | select FB_CFB_IMAGEBLIT | |
1827 | ---help--- | |
1828 | Framebuffer driver for the Intel 2700G (Marathon) Graphics | |
1829 | Accelerator | |
1830 | ||
1831 | config FB_MBX_DEBUG | |
1832 | bool "Enable debugging info via debugfs" | |
1833 | depends on FB_MBX && DEBUG_FS | |
1834 | default n | |
1835 | ---help--- | |
1836 | Enable this if you want debugging information using the debug | |
1837 | filesystem (debugfs) | |
1838 | ||
1839 | If unsure, say N. | |
1840 | ||
9b53a9e2 YS |
1841 | config FB_FSL_DIU |
1842 | tristate "Freescale DIU framebuffer support" | |
1843 | depends on FB && FSL_SOC | |
1844 | select FB_CFB_FILLRECT | |
1845 | select FB_CFB_COPYAREA | |
1846 | select FB_CFB_IMAGEBLIT | |
1847 | select PPC_LIB_RHEAP | |
1848 | ---help--- | |
1849 | Framebuffer driver for the Freescale SoC DIU | |
1850 | ||
ecc41d5e RD |
1851 | config FB_W100 |
1852 | tristate "W100 frame buffer support" | |
e5dd3cbd | 1853 | depends on FB && ARCH_PXA |
ecc41d5e RD |
1854 | select FB_CFB_FILLRECT |
1855 | select FB_CFB_COPYAREA | |
1856 | select FB_CFB_IMAGEBLIT | |
ecc41d5e RD |
1857 | ---help--- |
1858 | Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. | |
e5dd3cbd | 1859 | It can also drive the w3220 chip found on iPAQ hx4700. |
ecc41d5e RD |
1860 | |
1861 | This driver is also available as a module ( = code which can be | |
1862 | inserted and removed from the running kernel whenever you want). The | |
74b4f042 | 1863 | module will be called w100fb. If you want to compile it as a module, |
39f5fb30 | 1864 | say M here and read <file:Documentation/kbuild/modules.txt>. |
ecc41d5e RD |
1865 | |
1866 | If unsure, say N. | |
1da177e4 | 1867 | |
cfb4f5d1 MD |
1868 | config FB_SH_MOBILE_LCDC |
1869 | tristate "SuperH Mobile LCDC framebuffer support" | |
727dc3fd | 1870 | depends on FB && SUPERH && HAVE_CLK |
2540c111 MD |
1871 | select FB_SYS_FILLRECT |
1872 | select FB_SYS_COPYAREA | |
1873 | select FB_SYS_IMAGEBLIT | |
1874 | select FB_SYS_FOPS | |
8564557a | 1875 | select FB_DEFERRED_IO |
cfb4f5d1 MD |
1876 | ---help--- |
1877 | Frame buffer driver for the on-chip SH-Mobile LCD controller. | |
1878 | ||
b53cde35 DB |
1879 | config FB_TMIO |
1880 | tristate "Toshiba Mobile IO FrameBuffer support" | |
1881 | depends on FB && MFD_CORE | |
1882 | select FB_CFB_FILLRECT | |
1883 | select FB_CFB_COPYAREA | |
1884 | select FB_CFB_IMAGEBLIT | |
1885 | ---help--- | |
1886 | Frame buffer driver for the Toshiba Mobile IO integrated as found | |
1887 | on the Sharp SL-6000 series | |
1888 | ||
1889 | This driver is also available as a module ( = code which can be | |
1890 | inserted and removed from the running kernel whenever you want). The | |
1891 | module will be called tmiofb. If you want to compile it as a module, | |
1892 | say M here and read <file:Documentation/kbuild/modules.txt>. | |
1893 | ||
1894 | If unsure, say N. | |
1895 | ||
1896 | config FB_TMIO_ACCELL | |
1897 | bool "tmiofb acceleration" | |
1898 | depends on FB_TMIO | |
1899 | default y | |
1900 | ||
ec549a0f BD |
1901 | config FB_S3C |
1902 | tristate "Samsung S3C framebuffer support" | |
1903 | depends on FB && ARCH_S3C64XX | |
1904 | select FB_CFB_FILLRECT | |
1905 | select FB_CFB_COPYAREA | |
1906 | select FB_CFB_IMAGEBLIT | |
1907 | ---help--- | |
1908 | Frame buffer driver for the built-in FB controller in the Samsung | |
1909 | SoC line from the S3C2443 onwards, including the S3C2416, S3C2450, | |
1910 | and the S3C64XX series such as the S3C6400 and S3C6410. | |
1911 | ||
1912 | These chips all have the same basic framebuffer design with the | |
1913 | actual capabilities depending on the chip. For instance the S3C6400 | |
1914 | and S3C6410 support 4 hardware windows whereas the S3C24XX series | |
1915 | currently only have two. | |
1916 | ||
1917 | Currently the support is only for the S3C6400 and S3C6410 SoCs. | |
1918 | ||
1919 | config FB_S3C_DEBUG_REGWRITE | |
1920 | bool "Debug register writes" | |
1921 | depends on FB_S3C | |
1922 | ---help--- | |
1923 | Show all register writes via printk(KERN_DEBUG) | |
1924 | ||
20fd5767 AP |
1925 | config FB_S3C2410 |
1926 | tristate "S3C2410 LCD framebuffer support" | |
1927 | depends on FB && ARCH_S3C2410 | |
1928 | select FB_CFB_FILLRECT | |
1929 | select FB_CFB_COPYAREA | |
1930 | select FB_CFB_IMAGEBLIT | |
20fd5767 AP |
1931 | ---help--- |
1932 | Frame buffer driver for the built-in LCD controller in the Samsung | |
1933 | S3C2410 processor. | |
1934 | ||
1935 | This driver is also available as a module ( = code which can be | |
1936 | inserted and removed from the running kernel whenever you want). The | |
1937 | module will be called s3c2410fb. If you want to compile it as a module, | |
39f5fb30 | 1938 | say M here and read <file:Documentation/kbuild/modules.txt>. |
20fd5767 AP |
1939 | |
1940 | If unsure, say N. | |
1941 | config FB_S3C2410_DEBUG | |
1942 | bool "S3C2410 lcd debug messages" | |
1943 | depends on FB_S3C2410 | |
1944 | help | |
1945 | Turn on debugging messages. Note that you can set/unset at run time | |
1946 | through sysfs | |
1947 | ||
5fc404e4 BD |
1948 | config FB_SM501 |
1949 | tristate "Silicon Motion SM501 framebuffer support" | |
1950 | depends on FB && MFD_SM501 | |
1951 | select FB_CFB_FILLRECT | |
1952 | select FB_CFB_COPYAREA | |
1953 | select FB_CFB_IMAGEBLIT | |
1954 | ---help--- | |
1955 | Frame buffer driver for the CRT and LCD controllers in the Silicon | |
1956 | Motion SM501. | |
1957 | ||
1958 | This driver is also available as a module ( = code which can be | |
1959 | inserted and removed from the running kernel whenever you want). The | |
1960 | module will be called sm501fb. If you want to compile it as a module, | |
e403149c | 1961 | say M here and read <file:Documentation/kbuild/modules.txt>. |
5fc404e4 BD |
1962 | |
1963 | If unsure, say N. | |
1964 | ||
1965 | ||
36c9366e VW |
1966 | config FB_PNX4008_DUM |
1967 | tristate "Display Update Module support on Philips PNX4008 board" | |
1968 | depends on FB && ARCH_PNX4008 | |
1969 | ---help--- | |
1970 | Say Y here to enable support for PNX4008 Display Update Module (DUM) | |
1971 | ||
1972 | config FB_PNX4008_DUM_RGB | |
1973 | tristate "RGB Framebuffer support on Philips PNX4008 board" | |
1974 | depends on FB_PNX4008_DUM | |
1975 | select FB_CFB_FILLRECT | |
1976 | select FB_CFB_COPYAREA | |
1977 | select FB_CFB_IMAGEBLIT | |
1978 | ---help--- | |
1979 | Say Y here to enable support for PNX4008 RGB Framebuffer | |
1980 | ||
a3d89983 PM |
1981 | config FB_IBM_GXT4500 |
1982 | tristate "Framebuffer support for IBM GXT4500P adaptor" | |
0058f479 | 1983 | depends on FB && PPC |
a3d89983 PM |
1984 | select FB_CFB_FILLRECT |
1985 | select FB_CFB_COPYAREA | |
1986 | select FB_CFB_IMAGEBLIT | |
1987 | ---help--- | |
1988 | Say Y here to enable support for the IBM GXT4500P display | |
1989 | adaptor, found on some IBM System P (pSeries) machines. | |
1990 | ||
310d8c11 | 1991 | config FB_PS3 |
9e6b99bd GU |
1992 | tristate "PS3 GPU framebuffer driver" |
1993 | depends on FB && PS3_PS3AV | |
92c4579d GU |
1994 | select FB_SYS_FILLRECT |
1995 | select FB_SYS_COPYAREA | |
1996 | select FB_SYS_IMAGEBLIT | |
1997 | select FB_SYS_FOPS | |
23e9c94c | 1998 | select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE |
310d8c11 GU |
1999 | ---help--- |
2000 | Include support for the virtual frame buffer in the PS3 platform. | |
2001 | ||
2002 | config FB_PS3_DEFAULT_SIZE_M | |
2003 | int "PS3 default frame buffer size (in MiB)" | |
2004 | depends on FB_PS3 | |
50b2529e | 2005 | default 9 |
310d8c11 GU |
2006 | ---help--- |
2007 | This is the default size (in MiB) of the virtual frame buffer in | |
2008 | the PS3. | |
2009 | The default value can be overridden on the kernel command line | |
2010 | using the "ps3fb" option (e.g. "ps3fb=9M"); | |
2011 | ||
147394c8 AK |
2012 | config FB_XILINX |
2013 | tristate "Xilinx frame buffer support" | |
6fa612b5 | 2014 | depends on FB && (XILINX_VIRTEX || MICROBLAZE) |
147394c8 AK |
2015 | select FB_CFB_FILLRECT |
2016 | select FB_CFB_COPYAREA | |
2017 | select FB_CFB_IMAGEBLIT | |
2018 | ---help--- | |
2019 | Include support for the Xilinx ML300/ML403 reference design | |
2020 | framebuffer. ML300 carries a 640*480 LCD display on the board, | |
2021 | ML403 uses a standard DB15 VGA connector. | |
2022 | ||
5abe3b40 YY |
2023 | config FB_COBALT |
2024 | tristate "Cobalt server LCD frame buffer support" | |
2025 | depends on FB && MIPS_COBALT | |
2026 | ||
4a25e418 | 2027 | config FB_SH7760 |
5c72f303 NI |
2028 | bool "SH7760/SH7763/SH7720/SH7721 LCDC support" |
2029 | depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \ | |
2030 | || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721) | |
2031 | select FB_CFB_FILLRECT | |
2032 | select FB_CFB_COPYAREA | |
2033 | select FB_CFB_IMAGEBLIT | |
2034 | ---help--- | |
2035 | Support for the SH7760/SH7763/SH7720/SH7721 integrated | |
2036 | (D)STN/TFT LCD Controller. | |
2037 | Supports display resolutions up to 1024x1024 pixel, grayscale and | |
2038 | color operation, with depths ranging from 1 bpp to 8 bpp monochrome | |
2039 | and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for | |
2040 | panels <= 320 pixel horizontal resolution. | |
4a25e418 | 2041 | |
4ed824d9 SR |
2042 | config FB_DA8XX |
2043 | tristate "DA8xx/OMAP-L1xx Framebuffer support" | |
2044 | depends on FB && ARCH_DAVINCI_DA8XX | |
2045 | select FB_CFB_FILLRECT | |
2046 | select FB_CFB_COPYAREA | |
2047 | select FB_CFB_IMAGEBLIT | |
2048 | ---help--- | |
2049 | This is the frame buffer device driver for the TI LCD controller | |
2050 | found on DA8xx/OMAP-L1xx SoCs. | |
2051 | If unsure, say N. | |
2052 | ||
1da177e4 LT |
2053 | config FB_VIRTUAL |
2054 | tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" | |
2055 | depends on FB | |
87b48849 AD |
2056 | select FB_SYS_FILLRECT |
2057 | select FB_SYS_COPYAREA | |
2058 | select FB_SYS_IMAGEBLIT | |
52102c07 | 2059 | select FB_SYS_FOPS |
1da177e4 LT |
2060 | ---help--- |
2061 | This is a `virtual' frame buffer device. It operates on a chunk of | |
2062 | unswappable kernel memory instead of on the memory of a graphics | |
2063 | board. This means you cannot see any output sent to this frame | |
2064 | buffer device, while it does consume precious memory. The main use | |
2065 | of this frame buffer device is testing and debugging the frame | |
2066 | buffer subsystem. Do NOT enable it for normal systems! To protect | |
2067 | the innocent, it has to be enabled explicitly at boot time using the | |
2068 | kernel option `video=vfb:'. | |
2069 | ||
2070 | To compile this driver as a module, choose M here: the | |
66cf7512 MF |
2071 | module will be called vfb. In order to load it, you must use |
2072 | the vfb_enable=1 option. | |
1da177e4 LT |
2073 | |
2074 | If unsure, say N. | |
e0e34ef7 | 2075 | |
4ee36dc0 MA |
2076 | config XEN_FBDEV_FRONTEND |
2077 | tristate "Xen virtual frame buffer support" | |
2078 | depends on FB && XEN | |
2079 | select FB_SYS_FILLRECT | |
2080 | select FB_SYS_COPYAREA | |
2081 | select FB_SYS_IMAGEBLIT | |
2082 | select FB_SYS_FOPS | |
2083 | select FB_DEFERRED_IO | |
ba69ea42 | 2084 | select XEN_XENBUS_FRONTEND |
4ee36dc0 MA |
2085 | default y |
2086 | help | |
2087 | This driver implements the front-end of the Xen virtual | |
2088 | frame buffer driver. It communicates with a back-end | |
2089 | in another domain. | |
2090 | ||
e9355085 JK |
2091 | config FB_METRONOME |
2092 | tristate "E-Ink Metronome/8track controller support" | |
2093 | depends on FB | |
2094 | select FB_SYS_FILLRECT | |
2095 | select FB_SYS_COPYAREA | |
2096 | select FB_SYS_IMAGEBLIT | |
2097 | select FB_SYS_FOPS | |
2098 | select FB_DEFERRED_IO | |
2099 | help | |
2100 | This driver implements support for the E-Ink Metronome | |
2101 | controller. The pre-release name for this device was 8track | |
2102 | and could also have been called by some vendors as PVI-nnnn. | |
2103 | ||
17a1217e AG |
2104 | config FB_MB862XX |
2105 | tristate "Fujitsu MB862xx GDC support" | |
2106 | depends on FB | |
2107 | select FB_CFB_FILLRECT | |
2108 | select FB_CFB_COPYAREA | |
2109 | select FB_CFB_IMAGEBLIT | |
2110 | ---help--- | |
2111 | Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers. | |
2112 | ||
2113 | config FB_MB862XX_PCI_GDC | |
2114 | bool "Carmine/Coral-P(A) GDC" | |
2115 | depends on PCI && FB_MB862XX | |
2116 | ---help--- | |
2117 | This enables framebuffer support for Fujitsu Carmine/Coral-P(A) | |
2118 | PCI graphics controller devices. | |
2119 | ||
2120 | config FB_MB862XX_LIME | |
2121 | bool "Lime GDC" | |
2122 | depends on FB_MB862XX | |
2123 | depends on OF && !FB_MB862XX_PCI_GDC | |
336e747e | 2124 | depends on PPC |
17a1217e AG |
2125 | select FB_FOREIGN_ENDIAN |
2126 | select FB_LITTLE_ENDIAN | |
2127 | ---help--- | |
2128 | Framebuffer support for Fujitsu Lime GDC on host CPU bus. | |
2129 | ||
88017bda RM |
2130 | config FB_EP93XX |
2131 | tristate "EP93XX frame buffer support" | |
2132 | depends on FB && ARCH_EP93XX | |
2133 | select FB_CFB_FILLRECT | |
2134 | select FB_CFB_COPYAREA | |
2135 | select FB_CFB_IMAGEBLIT | |
2136 | ---help--- | |
2137 | Framebuffer driver for the Cirrus Logic EP93XX series of processors. | |
2138 | This driver is also available as a module. The module will be called | |
2139 | ep93xx-fb. | |
2140 | ||
17a1217e AG |
2141 | config FB_PRE_INIT_FB |
2142 | bool "Don't reinitialize, use bootloader's GDC/Display configuration" | |
93f40e6f | 2143 | depends on FB && FB_MB862XX_LIME |
17a1217e AG |
2144 | ---help--- |
2145 | Select this option if display contents should be inherited as set by | |
2146 | the bootloader. | |
2147 | ||
d480ace0 | 2148 | config FB_MSM |
4e00dc76 | 2149 | tristate "MSM Framebuffer support" |
d480ace0 PM |
2150 | depends on FB && ARCH_MSM |
2151 | select FB_CFB_FILLRECT | |
2152 | select FB_CFB_COPYAREA | |
2153 | select FB_CFB_IMAGEBLIT | |
2154 | default y | |
2155 | ||
86528da2 | 2156 | config FB_MX3 |
6e1588cb GL |
2157 | tristate "MX3 Framebuffer support" |
2158 | depends on FB && MX3_IPU | |
2159 | select FB_CFB_FILLRECT | |
2160 | select FB_CFB_COPYAREA | |
2161 | select FB_CFB_IMAGEBLIT | |
2162 | default y | |
2163 | help | |
2164 | This is a framebuffer device for the i.MX31 LCD Controller. So | |
2165 | far only synchronous displays are supported. If you plan to use | |
2166 | an LCD display with your i.MX31 system, say Y here. | |
86528da2 | 2167 | |
0d4ff4df JK |
2168 | config FB_BROADSHEET |
2169 | tristate "E-Ink Broadsheet/Epson S1D13521 controller support" | |
2170 | depends on FB | |
2171 | select FB_SYS_FILLRECT | |
2172 | select FB_SYS_COPYAREA | |
2173 | select FB_SYS_IMAGEBLIT | |
2174 | select FB_SYS_FOPS | |
2175 | select FB_DEFERRED_IO | |
2176 | help | |
2177 | This driver implements support for the E-Ink Broadsheet | |
2178 | controller. The release name for this device was Epson S1D13521 | |
2179 | and could also have been called by other names when coupled with | |
2180 | a bridge adapter. | |
2181 | ||
f08f3895 | 2182 | source "drivers/video/omap/Kconfig" |
afedec18 | 2183 | source "drivers/video/omap2/Kconfig" |
0058f479 | 2184 | |
179b025f RD |
2185 | source "drivers/video/backlight/Kconfig" |
2186 | source "drivers/video/display/Kconfig" | |
2187 | ||
1da177e4 LT |
2188 | if VT |
2189 | source "drivers/video/console/Kconfig" | |
2190 | endif | |
2191 | ||
2192 | if FB || SGI_NEWPORT_CONSOLE | |
2193 | source "drivers/video/logo/Kconfig" | |
2194 | endif | |
2195 | ||
1da177e4 | 2196 | endmenu |