Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* Driver for USB Mass Storage compliant devices |
2 | * SCSI layer glue code | |
3 | * | |
1da177e4 LT |
4 | * Current development and maintenance by: |
5 | * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) | |
6 | * | |
7 | * Developed with the assistance of: | |
8 | * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) | |
9 | * (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov) | |
10 | * | |
11 | * Initial work by: | |
12 | * (c) 1999 Michael Gee (michael@linuxspecific.com) | |
13 | * | |
14 | * This driver is based on the 'USB Mass Storage Class' document. This | |
15 | * describes in detail the protocol used to communicate with such | |
16 | * devices. Clearly, the designers had SCSI and ATAPI commands in | |
17 | * mind when they created this document. The commands are all very | |
18 | * similar to commands in the SCSI-II and ATAPI specifications. | |
19 | * | |
20 | * It is important to note that in a number of cases this class | |
21 | * exhibits class-specific exemptions from the USB specification. | |
22 | * Notably the usage of NAK, STALL and ACK differs from the norm, in | |
23 | * that they are used to communicate wait, failed and OK on commands. | |
24 | * | |
25 | * Also, for certain devices, the interrupt endpoint is used to convey | |
26 | * status of a command. | |
27 | * | |
28 | * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more | |
29 | * information about this driver. | |
30 | * | |
31 | * This program is free software; you can redistribute it and/or modify it | |
32 | * under the terms of the GNU General Public License as published by the | |
33 | * Free Software Foundation; either version 2, or (at your option) any | |
34 | * later version. | |
35 | * | |
36 | * This program is distributed in the hope that it will be useful, but | |
37 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
38 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
39 | * General Public License for more details. | |
40 | * | |
41 | * You should have received a copy of the GNU General Public License along | |
42 | * with this program; if not, write to the Free Software Foundation, Inc., | |
43 | * 675 Mass Ave, Cambridge, MA 02139, USA. | |
44 | */ | |
45 | ||
1da177e4 | 46 | #include <linux/module.h> |
4186ecf8 | 47 | #include <linux/mutex.h> |
1da177e4 LT |
48 | |
49 | #include <scsi/scsi.h> | |
50 | #include <scsi/scsi_cmnd.h> | |
51 | #include <scsi/scsi_devinfo.h> | |
52 | #include <scsi/scsi_device.h> | |
53 | #include <scsi/scsi_eh.h> | |
54 | ||
55 | #include "usb.h" | |
56 | #include "scsiglue.h" | |
57 | #include "debug.h" | |
58 | #include "transport.h" | |
59 | #include "protocol.h" | |
60 | ||
a81a81a2 AS |
61 | /* Vendor IDs for companies that seem to include the READ CAPACITY bug |
62 | * in all their devices | |
63 | */ | |
64 | #define VENDOR_ID_NOKIA 0x0421 | |
65 | #define VENDOR_ID_NIKON 0x04b0 | |
506e9469 | 66 | #define VENDOR_ID_PENTAX 0x0a17 |
a81a81a2 AS |
67 | #define VENDOR_ID_MOTOROLA 0x22b8 |
68 | ||
1da177e4 LT |
69 | /*********************************************************************** |
70 | * Host functions | |
71 | ***********************************************************************/ | |
72 | ||
73 | static const char* host_info(struct Scsi_Host *host) | |
74 | { | |
00fa43ef MW |
75 | struct us_data *us = host_to_us(host); |
76 | return us->scsi_name; | |
1da177e4 LT |
77 | } |
78 | ||
79 | static int slave_alloc (struct scsi_device *sdev) | |
80 | { | |
823d12c9 AS |
81 | struct us_data *us = host_to_us(sdev->host); |
82 | ||
1da177e4 LT |
83 | /* |
84 | * Set the INQUIRY transfer length to 36. We don't use any of | |
85 | * the extra data and many devices choke if asked for more or | |
86 | * less than 36 bytes. | |
87 | */ | |
88 | sdev->inquiry_len = 36; | |
3a3416b1 | 89 | |
f756cbd4 AS |
90 | /* USB has unusual DMA-alignment requirements: Although the |
91 | * starting address of each scatter-gather element doesn't matter, | |
92 | * the length of each element except the last must be divisible | |
93 | * by the Bulk maxpacket value. There's currently no way to | |
94 | * express this by block-layer constraints, so we'll cop out | |
95 | * and simply require addresses to be aligned at 512-byte | |
96 | * boundaries. This is okay since most block I/O involves | |
97 | * hardware sectors that are multiples of 512 bytes in length, | |
98 | * and since host controllers up through USB 2.0 have maxpacket | |
99 | * values no larger than 512. | |
100 | * | |
101 | * But it doesn't suffice for Wireless USB, where Bulk maxpacket | |
102 | * values can be as large as 2048. To make that work properly | |
103 | * will require changes to the block layer. | |
148d9fe4 | 104 | */ |
f756cbd4 | 105 | blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); |
465ff318 | 106 | |
823d12c9 AS |
107 | /* Tell the SCSI layer if we know there is more than one LUN */ |
108 | if (us->protocol == USB_PR_BULK && us->max_lun > 0) | |
109 | sdev->sdev_bflags |= BLIST_FORCELUN; | |
110 | ||
1da177e4 LT |
111 | return 0; |
112 | } | |
113 | ||
114 | static int slave_configure(struct scsi_device *sdev) | |
115 | { | |
116 | struct us_data *us = host_to_us(sdev->host); | |
117 | ||
25985edc | 118 | /* Many devices have trouble transferring more than 32KB at a time, |
883d989a PD |
119 | * while others have trouble with more than 64K. At this time we |
120 | * are limiting both to 32K (64 sectores). | |
121 | */ | |
7e4d6c38 | 122 | if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) { |
33abc04f DM |
123 | unsigned int max_sectors = 64; |
124 | ||
7e4d6c38 | 125 | if (us->fflags & US_FL_MAX_SECTORS_MIN) |
33abc04f | 126 | max_sectors = PAGE_CACHE_SIZE >> 9; |
49d6271b | 127 | if (queue_max_hw_sectors(sdev->request_queue) > max_sectors) |
086fa5ff | 128 | blk_queue_max_hw_sectors(sdev->request_queue, |
33abc04f | 129 | max_sectors); |
5c16034d AS |
130 | } else if (sdev->type == TYPE_TAPE) { |
131 | /* Tapes need much higher max_sector limits, so just | |
132 | * raise it to the maximum possible (4 GB / 512) and | |
133 | * let the queue segment size sort out the real limit. | |
134 | */ | |
086fa5ff | 135 | blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF); |
33abc04f | 136 | } |
1da177e4 | 137 | |
96983d2d AS |
138 | /* Some USB host controllers can't do DMA; they have to use PIO. |
139 | * They indicate this by setting their dma_mask to NULL. For | |
140 | * such controllers we need to make sure the block layer sets | |
141 | * up bounce buffers in addressable memory. | |
142 | */ | |
143 | if (!us->pusb_dev->bus->controller->dma_mask) | |
144 | blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH); | |
145 | ||
1da177e4 LT |
146 | /* We can't put these settings in slave_alloc() because that gets |
147 | * called before the device type is known. Consequently these | |
148 | * settings can't be overridden via the scsi devinfo mechanism. */ | |
149 | if (sdev->type == TYPE_DISK) { | |
150 | ||
a81a81a2 AS |
151 | /* Some vendors seem to put the READ CAPACITY bug into |
152 | * all their devices -- primarily makers of cell phones | |
153 | * and digital cameras. Since these devices always use | |
154 | * flash media and can be expected to have an even number | |
155 | * of sectors, we will always enable the CAPACITY_HEURISTICS | |
156 | * flag unless told otherwise. */ | |
157 | switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) { | |
158 | case VENDOR_ID_NOKIA: | |
159 | case VENDOR_ID_NIKON: | |
506e9469 | 160 | case VENDOR_ID_PENTAX: |
a81a81a2 AS |
161 | case VENDOR_ID_MOTOROLA: |
162 | if (!(us->fflags & (US_FL_FIX_CAPACITY | | |
163 | US_FL_CAPACITY_OK))) | |
164 | us->fflags |= US_FL_CAPACITY_HEURISTICS; | |
165 | break; | |
166 | } | |
167 | ||
1da177e4 LT |
168 | /* Disk-type devices use MODE SENSE(6) if the protocol |
169 | * (SubClass) is Transparent SCSI, otherwise they use | |
170 | * MODE SENSE(10). */ | |
8fa7fd74 | 171 | if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB) |
1da177e4 LT |
172 | sdev->use_10_for_ms = 1; |
173 | ||
174 | /* Many disks only accept MODE SENSE transfer lengths of | |
175 | * 192 bytes (that's what Windows uses). */ | |
176 | sdev->use_192_bytes_for_3f = 1; | |
177 | ||
178 | /* Some devices don't like MODE SENSE with page=0x3f, | |
179 | * which is the command used for checking if a device | |
180 | * is write-protected. Now that we tell the sd driver | |
181 | * to do a 192-byte transfer with this command the | |
182 | * majority of devices work fine, but a few still can't | |
183 | * handle it. The sd driver will simply assume those | |
184 | * devices are write-enabled. */ | |
7e4d6c38 | 185 | if (us->fflags & US_FL_NO_WP_DETECT) |
1da177e4 LT |
186 | sdev->skip_ms_page_3f = 1; |
187 | ||
188 | /* A number of devices have problems with MODE SENSE for | |
189 | * page x08, so we will skip it. */ | |
190 | sdev->skip_ms_page_8 = 1; | |
191 | ||
09b6b51b AS |
192 | /* Some devices don't handle VPD pages correctly */ |
193 | sdev->skip_vpd_pages = 1; | |
194 | ||
3c6bdaea MP |
195 | /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */ |
196 | sdev->no_report_opcodes = 1; | |
197 | ||
5db44863 MP |
198 | /* Do not attempt to use WRITE SAME */ |
199 | sdev->no_write_same = 1; | |
200 | ||
1da177e4 LT |
201 | /* Some disks return the total number of blocks in response |
202 | * to READ CAPACITY rather than the highest block number. | |
203 | * If this device makes that mistake, tell the sd driver. */ | |
7e4d6c38 | 204 | if (us->fflags & US_FL_FIX_CAPACITY) |
1da177e4 | 205 | sdev->fix_capacity = 1; |
86dbde9c | 206 | |
61bf54b7 ON |
207 | /* A few disks have two indistinguishable version, one of |
208 | * which reports the correct capacity and the other does not. | |
209 | * The sd driver has to guess which is the case. */ | |
7e4d6c38 | 210 | if (us->fflags & US_FL_CAPACITY_HEURISTICS) |
61bf54b7 ON |
211 | sdev->guess_capacity = 1; |
212 | ||
00914025 HG |
213 | /* Some devices cannot handle READ_CAPACITY_16 */ |
214 | if (us->fflags & US_FL_NO_READ_CAPACITY_16) | |
215 | sdev->no_read_capacity_16 = 1; | |
216 | ||
6a0bdffa AS |
217 | /* |
218 | * Many devices do not respond properly to READ_CAPACITY_16. | |
219 | * Tell the SCSI layer to try READ_CAPACITY_10 first. | |
32c37fc3 ON |
220 | * However some USB 3.0 drive enclosures return capacity |
221 | * modulo 2TB. Those must use READ_CAPACITY_16 | |
6a0bdffa | 222 | */ |
32c37fc3 ON |
223 | if (!(us->fflags & US_FL_NEEDS_CAP16)) |
224 | sdev->try_rc_10_first = 1; | |
6a0bdffa | 225 | |
1537e0ad BE |
226 | /* assume SPC3 or latter devices support sense size > 18 */ |
227 | if (sdev->scsi_level > SCSI_SPC_2) | |
228 | us->fflags |= US_FL_SANE_SENSE; | |
229 | ||
86dbde9c MD |
230 | /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable |
231 | * Hardware Error) when any low-level error occurs, | |
232 | * recoverable or not. Setting this flag tells the SCSI | |
233 | * midlayer to retry such commands, which frequently will | |
234 | * succeed and fix the error. The worst this can lead to | |
235 | * is an occasional series of retries that will all fail. */ | |
236 | sdev->retry_hwerror = 1; | |
237 | ||
f09e495d MCC |
238 | /* USB disks should allow restart. Some drives spin down |
239 | * automatically, requiring a START-STOP UNIT command. */ | |
240 | sdev->allow_restart = 1; | |
241 | ||
23c3e290 HG |
242 | /* Some USB cardreaders have trouble reading an sdcard's last |
243 | * sector in a larger then 1 sector read, since the performance | |
244 | * impact is negible we set this flag for all USB disks */ | |
245 | sdev->last_sector_bug = 1; | |
25ff1c31 AS |
246 | |
247 | /* Enable last-sector hacks for single-target devices using | |
248 | * the Bulk-only transport, unless we already know the | |
249 | * capacity will be decremented or is correct. */ | |
250 | if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK | | |
251 | US_FL_SCM_MULT_TARG)) && | |
8fa7fd74 | 252 | us->protocol == USB_PR_BULK) |
25ff1c31 | 253 | us->use_last_sector_hacks = 1; |
eaa05dfc NJ |
254 | |
255 | /* Check if write cache default on flag is set or not */ | |
256 | if (us->fflags & US_FL_WRITE_CACHE) | |
257 | sdev->wce_default_on = 1; | |
258 | ||
1da177e4 LT |
259 | } else { |
260 | ||
261 | /* Non-disk-type devices don't need to blacklist any pages | |
262 | * or to force 192-byte transfer lengths for MODE SENSE. | |
263 | * But they do need to use MODE SENSE(10). */ | |
264 | sdev->use_10_for_ms = 1; | |
ae38c78a HG |
265 | |
266 | /* Some (fake) usb cdrom devices don't like READ_DISC_INFO */ | |
267 | if (us->fflags & US_FL_NO_READ_DISC_INFO) | |
268 | sdev->no_read_disc_info = 1; | |
1da177e4 LT |
269 | } |
270 | ||
f3f49065 AS |
271 | /* The CB and CBI transports have no way to pass LUN values |
272 | * other than the bits in the second byte of a CDB. But those | |
273 | * bits don't get set to the LUN value if the device reports | |
274 | * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily | |
275 | * be single-LUN. | |
276 | */ | |
8fa7fd74 | 277 | if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) && |
f3f49065 AS |
278 | sdev->scsi_level == SCSI_UNKNOWN) |
279 | us->max_lun = 0; | |
280 | ||
1da177e4 LT |
281 | /* Some devices choke when they receive a PREVENT-ALLOW MEDIUM |
282 | * REMOVAL command, so suppress those commands. */ | |
7e4d6c38 | 283 | if (us->fflags & US_FL_NOT_LOCKABLE) |
1da177e4 LT |
284 | sdev->lockable = 0; |
285 | ||
286 | /* this is to satisfy the compiler, tho I don't think the | |
287 | * return code is ever checked anywhere. */ | |
288 | return 0; | |
289 | } | |
290 | ||
09b6b51b AS |
291 | static int target_alloc(struct scsi_target *starget) |
292 | { | |
af74d2da AS |
293 | struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent)); |
294 | ||
09b6b51b AS |
295 | /* |
296 | * Some USB drives don't support REPORT LUNS, even though they | |
297 | * report a SCSI revision level above 2. Tell the SCSI layer | |
298 | * not to issue that command; it will perform a normal sequential | |
299 | * scan instead. | |
300 | */ | |
301 | starget->no_report_luns = 1; | |
af74d2da AS |
302 | |
303 | /* | |
304 | * The UFI spec treats the Peripheral Qualifier bits in an | |
305 | * INQUIRY result as reserved and requires devices to set them | |
306 | * to 0. However the SCSI spec requires these bits to be set | |
307 | * to 3 to indicate when a LUN is not present. | |
308 | * | |
309 | * Let the scanning code know if this target merely sets | |
310 | * Peripheral Device Type to 0x1f to indicate no LUN. | |
311 | */ | |
312 | if (us->subclass == USB_SC_UFI) | |
313 | starget->pdt_1f_for_no_lun = 1; | |
314 | ||
09b6b51b AS |
315 | return 0; |
316 | } | |
317 | ||
1da177e4 LT |
318 | /* queue a command */ |
319 | /* This is always called with scsi_lock(host) held */ | |
f281233d | 320 | static int queuecommand_lck(struct scsi_cmnd *srb, |
1da177e4 LT |
321 | void (*done)(struct scsi_cmnd *)) |
322 | { | |
323 | struct us_data *us = host_to_us(srb->device->host); | |
324 | ||
1da177e4 LT |
325 | /* check for state-transition errors */ |
326 | if (us->srb != NULL) { | |
327 | printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n", | |
441b62c1 | 328 | __func__, us->srb); |
1da177e4 LT |
329 | return SCSI_MLQUEUE_HOST_BUSY; |
330 | } | |
331 | ||
332 | /* fail the command if we are disconnecting */ | |
7e4d6c38 | 333 | if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { |
191648d0 | 334 | usb_stor_dbg(us, "Fail command during disconnect\n"); |
1da177e4 LT |
335 | srb->result = DID_NO_CONNECT << 16; |
336 | done(srb); | |
337 | return 0; | |
338 | } | |
339 | ||
340 | /* enqueue the command and wake up the control thread */ | |
341 | srb->scsi_done = done; | |
342 | us->srb = srb; | |
7119e3c3 | 343 | complete(&us->cmnd_ready); |
1da177e4 LT |
344 | |
345 | return 0; | |
346 | } | |
347 | ||
f281233d JG |
348 | static DEF_SCSI_QCMD(queuecommand) |
349 | ||
1da177e4 LT |
350 | /*********************************************************************** |
351 | * Error handling functions | |
352 | ***********************************************************************/ | |
353 | ||
354 | /* Command timeout and abort */ | |
1da177e4 LT |
355 | static int command_abort(struct scsi_cmnd *srb) |
356 | { | |
357 | struct us_data *us = host_to_us(srb->device->host); | |
358 | ||
191648d0 | 359 | usb_stor_dbg(us, "%s called\n", __func__); |
1da177e4 | 360 | |
226173ed MD |
361 | /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING |
362 | * bits are protected by the host lock. */ | |
363 | scsi_lock(us_to_host(us)); | |
364 | ||
1da177e4 LT |
365 | /* Is this command still active? */ |
366 | if (us->srb != srb) { | |
226173ed | 367 | scsi_unlock(us_to_host(us)); |
191648d0 | 368 | usb_stor_dbg(us, "-- nothing to abort\n"); |
1da177e4 LT |
369 | return FAILED; |
370 | } | |
371 | ||
372 | /* Set the TIMED_OUT bit. Also set the ABORTING bit, but only if | |
373 | * a device reset isn't already in progress (to avoid interfering | |
226173ed MD |
374 | * with the reset). Note that we must retain the host lock while |
375 | * calling usb_stor_stop_transport(); otherwise it might interfere | |
376 | * with an auto-reset that begins as soon as we release the lock. */ | |
7e4d6c38 AS |
377 | set_bit(US_FLIDX_TIMED_OUT, &us->dflags); |
378 | if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) { | |
379 | set_bit(US_FLIDX_ABORTING, &us->dflags); | |
1da177e4 LT |
380 | usb_stor_stop_transport(us); |
381 | } | |
226173ed | 382 | scsi_unlock(us_to_host(us)); |
1da177e4 LT |
383 | |
384 | /* Wait for the aborted command to finish */ | |
385 | wait_for_completion(&us->notify); | |
1da177e4 LT |
386 | return SUCCESS; |
387 | } | |
388 | ||
389 | /* This invokes the transport reset mechanism to reset the state of the | |
390 | * device */ | |
1da177e4 LT |
391 | static int device_reset(struct scsi_cmnd *srb) |
392 | { | |
393 | struct us_data *us = host_to_us(srb->device->host); | |
394 | int result; | |
395 | ||
191648d0 | 396 | usb_stor_dbg(us, "%s called\n", __func__); |
1da177e4 | 397 | |
d526875d GKH |
398 | /* lock the device pointers and do the reset */ |
399 | mutex_lock(&(us->dev_mutex)); | |
400 | result = us->transport_reset(us); | |
401 | mutex_unlock(&us->dev_mutex); | |
1da177e4 | 402 | |
4d07ef76 | 403 | return result < 0 ? FAILED : SUCCESS; |
1da177e4 LT |
404 | } |
405 | ||
4d07ef76 | 406 | /* Simulate a SCSI bus reset by resetting the device's USB port. */ |
1da177e4 LT |
407 | static int bus_reset(struct scsi_cmnd *srb) |
408 | { | |
409 | struct us_data *us = host_to_us(srb->device->host); | |
4d07ef76 | 410 | int result; |
1da177e4 | 411 | |
191648d0 JP |
412 | usb_stor_dbg(us, "%s called\n", __func__); |
413 | ||
4d07ef76 | 414 | result = usb_stor_port_reset(us); |
1da177e4 LT |
415 | return result < 0 ? FAILED : SUCCESS; |
416 | } | |
417 | ||
418 | /* Report a driver-initiated device reset to the SCSI layer. | |
419 | * Calling this for a SCSI-initiated reset is unnecessary but harmless. | |
420 | * The caller must own the SCSI host lock. */ | |
421 | void usb_stor_report_device_reset(struct us_data *us) | |
422 | { | |
423 | int i; | |
424 | struct Scsi_Host *host = us_to_host(us); | |
425 | ||
426 | scsi_report_device_reset(host, 0, 0); | |
7e4d6c38 | 427 | if (us->fflags & US_FL_SCM_MULT_TARG) { |
1da177e4 LT |
428 | for (i = 1; i < host->max_id; ++i) |
429 | scsi_report_device_reset(host, 0, i); | |
430 | } | |
431 | } | |
432 | ||
4d07ef76 MD |
433 | /* Report a driver-initiated bus reset to the SCSI layer. |
434 | * Calling this for a SCSI-initiated reset is unnecessary but harmless. | |
f07600cf | 435 | * The caller must not own the SCSI host lock. */ |
4d07ef76 MD |
436 | void usb_stor_report_bus_reset(struct us_data *us) |
437 | { | |
f07600cf AS |
438 | struct Scsi_Host *host = us_to_host(us); |
439 | ||
440 | scsi_lock(host); | |
441 | scsi_report_bus_reset(host, 0); | |
442 | scsi_unlock(host); | |
4d07ef76 MD |
443 | } |
444 | ||
1da177e4 LT |
445 | /*********************************************************************** |
446 | * /proc/scsi/ functions | |
447 | ***********************************************************************/ | |
448 | ||
09dae7fc AV |
449 | static int write_info(struct Scsi_Host *host, char *buffer, int length) |
450 | { | |
451 | /* if someone is sending us data, just throw it away */ | |
452 | return length; | |
453 | } | |
454 | ||
1da177e4 LT |
455 | /* we use this macro to help us write into the buffer */ |
456 | #undef SPRINTF | |
09dae7fc | 457 | #define SPRINTF(args...) seq_printf(m, ## args) |
1da177e4 | 458 | |
09dae7fc | 459 | static int show_info (struct seq_file *m, struct Scsi_Host *host) |
1da177e4 LT |
460 | { |
461 | struct us_data *us = host_to_us(host); | |
1da177e4 LT |
462 | const char *string; |
463 | ||
1da177e4 LT |
464 | /* print the controller name */ |
465 | SPRINTF(" Host scsi%d: usb-storage\n", host->host_no); | |
466 | ||
467 | /* print product, vendor, and serial number strings */ | |
468 | if (us->pusb_dev->manufacturer) | |
469 | string = us->pusb_dev->manufacturer; | |
470 | else if (us->unusual_dev->vendorName) | |
471 | string = us->unusual_dev->vendorName; | |
472 | else | |
473 | string = "Unknown"; | |
474 | SPRINTF(" Vendor: %s\n", string); | |
475 | if (us->pusb_dev->product) | |
476 | string = us->pusb_dev->product; | |
477 | else if (us->unusual_dev->productName) | |
478 | string = us->unusual_dev->productName; | |
479 | else | |
480 | string = "Unknown"; | |
481 | SPRINTF(" Product: %s\n", string); | |
482 | if (us->pusb_dev->serial) | |
483 | string = us->pusb_dev->serial; | |
484 | else | |
485 | string = "None"; | |
486 | SPRINTF("Serial Number: %s\n", string); | |
487 | ||
488 | /* show the protocol and transport */ | |
489 | SPRINTF(" Protocol: %s\n", us->protocol_name); | |
490 | SPRINTF(" Transport: %s\n", us->transport_name); | |
491 | ||
492 | /* show the device flags */ | |
09dae7fc | 493 | SPRINTF(" Quirks:"); |
1da177e4 LT |
494 | |
495 | #define US_FLAG(name, value) \ | |
09dae7fc | 496 | if (us->fflags & value) seq_printf(m, " " #name); |
1da177e4 LT |
497 | US_DO_ALL_FLAGS |
498 | #undef US_FLAG | |
09dae7fc AV |
499 | seq_putc(m, '\n'); |
500 | return 0; | |
1da177e4 LT |
501 | } |
502 | ||
503 | /*********************************************************************** | |
504 | * Sysfs interface | |
505 | ***********************************************************************/ | |
506 | ||
507 | /* Output routine for the sysfs max_sectors file */ | |
f2e0ae93 | 508 | static ssize_t max_sectors_show(struct device *dev, struct device_attribute *attr, char *buf) |
1da177e4 LT |
509 | { |
510 | struct scsi_device *sdev = to_scsi_device(dev); | |
511 | ||
49d6271b | 512 | return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue)); |
1da177e4 LT |
513 | } |
514 | ||
515 | /* Input routine for the sysfs max_sectors file */ | |
f2e0ae93 | 516 | static ssize_t max_sectors_store(struct device *dev, struct device_attribute *attr, const char *buf, |
1da177e4 LT |
517 | size_t count) |
518 | { | |
519 | struct scsi_device *sdev = to_scsi_device(dev); | |
520 | unsigned short ms; | |
521 | ||
49d6271b | 522 | if (sscanf(buf, "%hu", &ms) > 0) { |
086fa5ff | 523 | blk_queue_max_hw_sectors(sdev->request_queue, ms); |
49d6271b | 524 | return count; |
1da177e4 | 525 | } |
f2e0ae93 | 526 | return -EINVAL; |
1da177e4 | 527 | } |
f2e0ae93 | 528 | static DEVICE_ATTR_RW(max_sectors); |
1da177e4 LT |
529 | |
530 | static struct device_attribute *sysfs_device_attr_list[] = { | |
f2e0ae93 GKH |
531 | &dev_attr_max_sectors, |
532 | NULL, | |
533 | }; | |
1da177e4 LT |
534 | |
535 | /* | |
536 | * this defines our host template, with which we'll allocate hosts | |
537 | */ | |
538 | ||
539 | struct scsi_host_template usb_stor_host_template = { | |
540 | /* basic userland interface stuff */ | |
541 | .name = "usb-storage", | |
542 | .proc_name = "usb-storage", | |
09dae7fc AV |
543 | .show_info = show_info, |
544 | .write_info = write_info, | |
1da177e4 LT |
545 | .info = host_info, |
546 | ||
547 | /* command interface -- queued only */ | |
548 | .queuecommand = queuecommand, | |
549 | ||
550 | /* error and abort handlers */ | |
551 | .eh_abort_handler = command_abort, | |
552 | .eh_device_reset_handler = device_reset, | |
553 | .eh_bus_reset_handler = bus_reset, | |
554 | ||
555 | /* queue commands only, only one command per LUN */ | |
556 | .can_queue = 1, | |
557 | .cmd_per_lun = 1, | |
558 | ||
559 | /* unknown initiator id */ | |
560 | .this_id = -1, | |
561 | ||
562 | .slave_alloc = slave_alloc, | |
563 | .slave_configure = slave_configure, | |
09b6b51b | 564 | .target_alloc = target_alloc, |
1da177e4 LT |
565 | |
566 | /* lots of sg segments can be handled */ | |
49d6271b | 567 | .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, |
1da177e4 LT |
568 | |
569 | /* limit the total size of a transfer to 120 KB */ | |
570 | .max_sectors = 240, | |
571 | ||
572 | /* merge commands... this seems to help performance, but | |
573 | * periodically someone should test to see which setting is more | |
574 | * optimal. | |
575 | */ | |
576 | .use_clustering = 1, | |
577 | ||
578 | /* emulated HBA */ | |
579 | .emulated = 1, | |
580 | ||
581 | /* we do our own delay after a device or bus reset */ | |
582 | .skip_settle_delay = 1, | |
583 | ||
584 | /* sysfs device attributes */ | |
585 | .sdev_attrs = sysfs_device_attr_list, | |
586 | ||
587 | /* module management */ | |
588 | .module = THIS_MODULE | |
589 | }; | |
590 | ||
591 | /* To Report "Illegal Request: Invalid Field in CDB */ | |
592 | unsigned char usb_stor_sense_invalidCDB[18] = { | |
593 | [0] = 0x70, /* current error */ | |
594 | [2] = ILLEGAL_REQUEST, /* Illegal Request = 0x05 */ | |
595 | [7] = 0x0a, /* additional length */ | |
596 | [12] = 0x24 /* Invalid Field in CDB */ | |
597 | }; | |
e6e244b6 | 598 | EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB); |