Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * USB ConnectTech WhiteHEAT driver | |
3 | * | |
4 | * Copyright (C) 2002 | |
5 | * Connect Tech Inc. | |
6 | * | |
7 | * Copyright (C) 1999 - 2001 | |
8 | * Greg Kroah-Hartman (greg@kroah.com) | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2 of the License, or | |
13 | * (at your option) any later version. | |
14 | * | |
15 | * See Documentation/usb/usb-serial.txt for more information on using this driver | |
16 | * | |
17 | * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com) | |
18 | * Upgrade to full working driver | |
19 | * | |
20 | * (05/30/2001) gkh | |
21 | * switched from using spinlock to a semaphore, which fixes lots of problems. | |
22 | * | |
23 | * (04/08/2001) gb | |
24 | * Identify version on module load. | |
25 | * | |
26 | * 2001_Mar_19 gkh | |
27 | * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more | |
28 | * than once, and the got the proper usb_device_id table entries so | |
29 | * the driver works again. | |
30 | * | |
31 | * (11/01/2000) Adam J. Richter | |
32 | * usb_device_id table support | |
33 | * | |
34 | * (10/05/2000) gkh | |
35 | * Fixed bug with urb->dev not being set properly, now that the usb | |
36 | * core needs it. | |
37 | * | |
38 | * (10/03/2000) smd | |
39 | * firmware is improved to guard against crap sent to device | |
40 | * firmware now replies CMD_FAILURE on bad things | |
41 | * read_callback fix you provided for private info struct | |
42 | * command_finished now indicates success or fail | |
43 | * setup_port struct now packed to avoid gcc padding | |
44 | * firmware uses 1 based port numbering, driver now handles that | |
45 | * | |
46 | * (09/11/2000) gkh | |
47 | * Removed DEBUG #ifdefs with call to usb_serial_debug_data | |
48 | * | |
49 | * (07/19/2000) gkh | |
50 | * Added module_init and module_exit functions to handle the fact that this | |
51 | * driver is a loadable module now. | |
52 | * Fixed bug with port->minor that was found by Al Borchers | |
53 | * | |
54 | * (07/04/2000) gkh | |
55 | * Added support for port settings. Baud rate can now be changed. Line signals | |
56 | * are not transferred to and from the tty layer yet, but things seem to be | |
57 | * working well now. | |
58 | * | |
59 | * (05/04/2000) gkh | |
60 | * First cut at open and close commands. Data can flow through the ports at | |
61 | * default speeds now. | |
62 | * | |
63 | * (03/26/2000) gkh | |
64 | * Split driver up into device specific pieces. | |
65 | * | |
66 | */ | |
67 | ||
1da177e4 LT |
68 | #include <linux/kernel.h> |
69 | #include <linux/errno.h> | |
70 | #include <linux/init.h> | |
71 | #include <linux/slab.h> | |
72 | #include <linux/tty.h> | |
73 | #include <linux/tty_driver.h> | |
74 | #include <linux/tty_flip.h> | |
75 | #include <linux/module.h> | |
76 | #include <linux/spinlock.h> | |
08a2b3b6 | 77 | #include <linux/mutex.h> |
1da177e4 LT |
78 | #include <asm/uaccess.h> |
79 | #include <asm/termbits.h> | |
80 | #include <linux/usb.h> | |
81 | #include <linux/serial_reg.h> | |
82 | #include <linux/serial.h> | |
a969888c | 83 | #include <linux/usb/serial.h> |
1da177e4 LT |
84 | #include "whiteheat_fw.h" /* firmware for the ConnectTech WhiteHEAT device */ |
85 | #include "whiteheat.h" /* WhiteHEAT specific commands */ | |
86 | ||
87 | static int debug; | |
88 | ||
89 | #ifndef CMSPAR | |
90 | #define CMSPAR 0 | |
91 | #endif | |
92 | ||
93 | /* | |
94 | * Version Information | |
95 | */ | |
96 | #define DRIVER_VERSION "v2.0" | |
97 | #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>" | |
98 | #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" | |
99 | ||
100 | #define CONNECT_TECH_VENDOR_ID 0x0710 | |
101 | #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001 | |
102 | #define CONNECT_TECH_WHITE_HEAT_ID 0x8001 | |
103 | ||
104 | /* | |
105 | ID tables for whiteheat are unusual, because we want to different | |
106 | things for different versions of the device. Eventually, this | |
107 | will be doable from a single table. But, for now, we define two | |
108 | separate ID tables, and then a third table that combines them | |
109 | just for the purpose of exporting the autoloading information. | |
110 | */ | |
111 | static struct usb_device_id id_table_std [] = { | |
112 | { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, | |
113 | { } /* Terminating entry */ | |
114 | }; | |
115 | ||
116 | static struct usb_device_id id_table_prerenumeration [] = { | |
117 | { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, | |
118 | { } /* Terminating entry */ | |
119 | }; | |
120 | ||
121 | static struct usb_device_id id_table_combined [] = { | |
122 | { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, | |
123 | { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, | |
124 | { } /* Terminating entry */ | |
125 | }; | |
126 | ||
127 | MODULE_DEVICE_TABLE (usb, id_table_combined); | |
128 | ||
129 | static struct usb_driver whiteheat_driver = { | |
1da177e4 LT |
130 | .name = "whiteheat", |
131 | .probe = usb_serial_probe, | |
132 | .disconnect = usb_serial_disconnect, | |
133 | .id_table = id_table_combined, | |
ba9dc657 | 134 | .no_dynamic_id = 1, |
1da177e4 LT |
135 | }; |
136 | ||
137 | /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ | |
138 | static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id); | |
139 | static int whiteheat_firmware_attach (struct usb_serial *serial); | |
140 | ||
141 | /* function prototypes for the Connect Tech WhiteHEAT serial converter */ | |
142 | static int whiteheat_attach (struct usb_serial *serial); | |
143 | static void whiteheat_shutdown (struct usb_serial *serial); | |
144 | static int whiteheat_open (struct usb_serial_port *port, struct file *filp); | |
145 | static void whiteheat_close (struct usb_serial_port *port, struct file *filp); | |
146 | static int whiteheat_write (struct usb_serial_port *port, const unsigned char *buf, int count); | |
147 | static int whiteheat_write_room (struct usb_serial_port *port); | |
148 | static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); | |
606d099c | 149 | static void whiteheat_set_termios (struct usb_serial_port *port, struct ktermios * old); |
1da177e4 LT |
150 | static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file); |
151 | static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear); | |
152 | static void whiteheat_break_ctl (struct usb_serial_port *port, int break_state); | |
153 | static int whiteheat_chars_in_buffer (struct usb_serial_port *port); | |
154 | static void whiteheat_throttle (struct usb_serial_port *port); | |
155 | static void whiteheat_unthrottle (struct usb_serial_port *port); | |
7d12e780 DH |
156 | static void whiteheat_read_callback (struct urb *urb); |
157 | static void whiteheat_write_callback (struct urb *urb); | |
1da177e4 | 158 | |
ea65370d | 159 | static struct usb_serial_driver whiteheat_fake_device = { |
18fcac35 GKH |
160 | .driver = { |
161 | .owner = THIS_MODULE, | |
269bda1c | 162 | .name = "whiteheatnofirm", |
18fcac35 | 163 | }, |
269bda1c | 164 | .description = "Connect Tech - WhiteHEAT - (prerenumeration)", |
d9b1b787 | 165 | .usb_driver = &whiteheat_driver, |
1da177e4 LT |
166 | .id_table = id_table_prerenumeration, |
167 | .num_interrupt_in = NUM_DONT_CARE, | |
168 | .num_bulk_in = NUM_DONT_CARE, | |
169 | .num_bulk_out = NUM_DONT_CARE, | |
170 | .num_ports = 1, | |
171 | .probe = whiteheat_firmware_download, | |
172 | .attach = whiteheat_firmware_attach, | |
173 | }; | |
174 | ||
ea65370d | 175 | static struct usb_serial_driver whiteheat_device = { |
18fcac35 GKH |
176 | .driver = { |
177 | .owner = THIS_MODULE, | |
269bda1c | 178 | .name = "whiteheat", |
18fcac35 | 179 | }, |
269bda1c | 180 | .description = "Connect Tech - WhiteHEAT", |
d9b1b787 | 181 | .usb_driver = &whiteheat_driver, |
1da177e4 LT |
182 | .id_table = id_table_std, |
183 | .num_interrupt_in = NUM_DONT_CARE, | |
184 | .num_bulk_in = NUM_DONT_CARE, | |
185 | .num_bulk_out = NUM_DONT_CARE, | |
186 | .num_ports = 4, | |
187 | .attach = whiteheat_attach, | |
188 | .shutdown = whiteheat_shutdown, | |
189 | .open = whiteheat_open, | |
190 | .close = whiteheat_close, | |
191 | .write = whiteheat_write, | |
192 | .write_room = whiteheat_write_room, | |
193 | .ioctl = whiteheat_ioctl, | |
194 | .set_termios = whiteheat_set_termios, | |
195 | .break_ctl = whiteheat_break_ctl, | |
196 | .tiocmget = whiteheat_tiocmget, | |
197 | .tiocmset = whiteheat_tiocmset, | |
198 | .chars_in_buffer = whiteheat_chars_in_buffer, | |
199 | .throttle = whiteheat_throttle, | |
200 | .unthrottle = whiteheat_unthrottle, | |
201 | .read_bulk_callback = whiteheat_read_callback, | |
202 | .write_bulk_callback = whiteheat_write_callback, | |
203 | }; | |
204 | ||
205 | ||
206 | struct whiteheat_command_private { | |
08a2b3b6 | 207 | struct mutex mutex; |
1da177e4 LT |
208 | __u8 port_running; |
209 | __u8 command_finished; | |
210 | wait_queue_head_t wait_command; /* for handling sleeping while waiting for a command to finish */ | |
211 | __u8 result_buffer[64]; | |
212 | }; | |
213 | ||
214 | ||
215 | #define THROTTLED 0x01 | |
216 | #define ACTUALLY_THROTTLED 0x02 | |
217 | ||
218 | static int urb_pool_size = 8; | |
219 | ||
220 | struct whiteheat_urb_wrap { | |
221 | struct list_head list; | |
222 | struct urb *urb; | |
223 | }; | |
224 | ||
225 | struct whiteheat_private { | |
226 | spinlock_t lock; | |
227 | __u8 flags; | |
228 | __u8 mcr; | |
229 | struct list_head rx_urbs_free; | |
230 | struct list_head rx_urbs_submitted; | |
231 | struct list_head rx_urb_q; | |
232 | struct work_struct rx_work; | |
c4028958 | 233 | struct usb_serial_port *port; |
1da177e4 LT |
234 | struct list_head tx_urbs_free; |
235 | struct list_head tx_urbs_submitted; | |
08a2b3b6 | 236 | struct mutex deathwarrant; |
1da177e4 LT |
237 | }; |
238 | ||
239 | ||
240 | /* local function prototypes */ | |
241 | static int start_command_port(struct usb_serial *serial); | |
242 | static void stop_command_port(struct usb_serial *serial); | |
7d12e780 DH |
243 | static void command_port_write_callback(struct urb *urb); |
244 | static void command_port_read_callback(struct urb *urb); | |
1da177e4 LT |
245 | |
246 | static int start_port_read(struct usb_serial_port *port); | |
247 | static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head); | |
248 | static struct list_head *list_first(struct list_head *head); | |
c4028958 | 249 | static void rx_data_softint(struct work_struct *work); |
1da177e4 LT |
250 | |
251 | static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize); | |
252 | static int firm_open(struct usb_serial_port *port); | |
253 | static int firm_close(struct usb_serial_port *port); | |
254 | static int firm_setup_port(struct usb_serial_port *port); | |
255 | static int firm_set_rts(struct usb_serial_port *port, __u8 onoff); | |
256 | static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff); | |
257 | static int firm_set_break(struct usb_serial_port *port, __u8 onoff); | |
258 | static int firm_purge(struct usb_serial_port *port, __u8 rxtx); | |
259 | static int firm_get_dtr_rts(struct usb_serial_port *port); | |
260 | static int firm_report_tx_done(struct usb_serial_port *port); | |
261 | ||
262 | ||
263 | #define COMMAND_PORT 4 | |
264 | #define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */ | |
265 | #define COMMAND_TIMEOUT_MS 2000 | |
266 | #define CLOSING_DELAY (30 * HZ) | |
267 | ||
268 | ||
269 | /***************************************************************************** | |
270 | * Connect Tech's White Heat prerenumeration driver functions | |
271 | *****************************************************************************/ | |
272 | ||
273 | /* steps to download the firmware to the WhiteHEAT device: | |
274 | - hold the reset (by writing to the reset bit of the CPUCS register) | |
275 | - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD | |
276 | - release the reset (by writing to the CPUCS register) | |
277 | - download the WH.HEX file for all addresses greater than 0x1b3f using | |
278 | VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD | |
279 | - hold the reset | |
280 | - download the WH.HEX file for all addresses less than 0x1b40 using | |
281 | VENDOR_REQUEST_ANCHOR_LOAD | |
282 | - release the reset | |
283 | - device renumerated itself and comes up as new device id with all | |
284 | firmware download completed. | |
285 | */ | |
286 | static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id) | |
287 | { | |
288 | int response; | |
289 | const struct whiteheat_hex_record *record; | |
290 | ||
291 | dbg("%s", __FUNCTION__); | |
292 | ||
293 | response = ezusb_set_reset (serial, 1); | |
294 | ||
295 | record = &whiteheat_loader[0]; | |
296 | while (record->address != 0xffff) { | |
297 | response = ezusb_writememory (serial, record->address, | |
298 | (unsigned char *)record->data, record->data_size, 0xa0); | |
299 | if (response < 0) { | |
300 | err("%s - ezusb_writememory failed for loader (%d %04X %p %d)", | |
301 | __FUNCTION__, response, record->address, record->data, record->data_size); | |
302 | break; | |
303 | } | |
304 | ++record; | |
305 | } | |
306 | ||
307 | response = ezusb_set_reset (serial, 0); | |
308 | ||
309 | record = &whiteheat_firmware[0]; | |
310 | while (record->address < 0x1b40) { | |
311 | ++record; | |
312 | } | |
313 | while (record->address != 0xffff) { | |
314 | response = ezusb_writememory (serial, record->address, | |
315 | (unsigned char *)record->data, record->data_size, 0xa3); | |
316 | if (response < 0) { | |
317 | err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)", | |
318 | __FUNCTION__, response, record->address, record->data, record->data_size); | |
319 | break; | |
320 | } | |
321 | ++record; | |
322 | } | |
323 | ||
324 | response = ezusb_set_reset (serial, 1); | |
325 | ||
326 | record = &whiteheat_firmware[0]; | |
327 | while (record->address < 0x1b40) { | |
328 | response = ezusb_writememory (serial, record->address, | |
329 | (unsigned char *)record->data, record->data_size, 0xa0); | |
330 | if (response < 0) { | |
331 | err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)", | |
332 | __FUNCTION__, response, record->address, record->data, record->data_size); | |
333 | break; | |
334 | } | |
335 | ++record; | |
336 | } | |
337 | ||
338 | response = ezusb_set_reset (serial, 0); | |
339 | ||
340 | return 0; | |
341 | } | |
342 | ||
343 | ||
344 | static int whiteheat_firmware_attach (struct usb_serial *serial) | |
345 | { | |
346 | /* We want this device to fail to have a driver assigned to it */ | |
347 | return 1; | |
348 | } | |
349 | ||
350 | ||
351 | /***************************************************************************** | |
352 | * Connect Tech's White Heat serial driver functions | |
353 | *****************************************************************************/ | |
354 | static int whiteheat_attach (struct usb_serial *serial) | |
355 | { | |
356 | struct usb_serial_port *command_port; | |
357 | struct whiteheat_command_private *command_info; | |
358 | struct usb_serial_port *port; | |
359 | struct whiteheat_private *info; | |
360 | struct whiteheat_hw_info *hw_info; | |
361 | int pipe; | |
362 | int ret; | |
363 | int alen; | |
364 | __u8 *command; | |
365 | __u8 *result; | |
366 | int i; | |
367 | int j; | |
368 | struct urb *urb; | |
369 | int buf_size; | |
370 | struct whiteheat_urb_wrap *wrap; | |
371 | struct list_head *tmp; | |
372 | ||
373 | command_port = serial->port[COMMAND_PORT]; | |
374 | ||
375 | pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress); | |
376 | command = kmalloc(2, GFP_KERNEL); | |
377 | if (!command) | |
378 | goto no_command_buffer; | |
379 | command[0] = WHITEHEAT_GET_HW_INFO; | |
380 | command[1] = 0; | |
381 | ||
382 | result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL); | |
383 | if (!result) | |
384 | goto no_result_buffer; | |
385 | /* | |
386 | * When the module is reloaded the firmware is still there and | |
387 | * the endpoints are still in the usb core unchanged. This is the | |
388 | * unlinking bug in disguise. Same for the call below. | |
389 | */ | |
390 | usb_clear_halt(serial->dev, pipe); | |
391 | ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); | |
392 | if (ret) { | |
269bda1c | 393 | err("%s: Couldn't send command [%d]", serial->type->description, ret); |
1da177e4 | 394 | goto no_firmware; |
09fd6bc8 | 395 | } else if (alen != 2) { |
269bda1c | 396 | err("%s: Send command incomplete [%d]", serial->type->description, alen); |
1da177e4 LT |
397 | goto no_firmware; |
398 | } | |
399 | ||
400 | pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress); | |
401 | /* See the comment on the usb_clear_halt() above */ | |
402 | usb_clear_halt(serial->dev, pipe); | |
403 | ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); | |
404 | if (ret) { | |
269bda1c | 405 | err("%s: Couldn't get results [%d]", serial->type->description, ret); |
1da177e4 | 406 | goto no_firmware; |
09fd6bc8 | 407 | } else if (alen != sizeof(*hw_info) + 1) { |
269bda1c | 408 | err("%s: Get results incomplete [%d]", serial->type->description, alen); |
1da177e4 LT |
409 | goto no_firmware; |
410 | } else if (result[0] != command[0]) { | |
269bda1c | 411 | err("%s: Command failed [%d]", serial->type->description, result[0]); |
1da177e4 LT |
412 | goto no_firmware; |
413 | } | |
414 | ||
415 | hw_info = (struct whiteheat_hw_info *)&result[1]; | |
416 | ||
269bda1c | 417 | info("%s: Driver %s: Firmware v%d.%02d", serial->type->description, |
1da177e4 LT |
418 | DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev); |
419 | ||
420 | for (i = 0; i < serial->num_ports; i++) { | |
421 | port = serial->port[i]; | |
422 | ||
5cbded58 | 423 | info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); |
1da177e4 | 424 | if (info == NULL) { |
269bda1c | 425 | err("%s: Out of memory for port structures\n", serial->type->description); |
1da177e4 LT |
426 | goto no_private; |
427 | } | |
428 | ||
429 | spin_lock_init(&info->lock); | |
08a2b3b6 | 430 | mutex_init(&info->deathwarrant); |
1da177e4 LT |
431 | info->flags = 0; |
432 | info->mcr = 0; | |
c4028958 DH |
433 | INIT_WORK(&info->rx_work, rx_data_softint); |
434 | info->port = port; | |
1da177e4 LT |
435 | |
436 | INIT_LIST_HEAD(&info->rx_urbs_free); | |
437 | INIT_LIST_HEAD(&info->rx_urbs_submitted); | |
438 | INIT_LIST_HEAD(&info->rx_urb_q); | |
439 | INIT_LIST_HEAD(&info->tx_urbs_free); | |
440 | INIT_LIST_HEAD(&info->tx_urbs_submitted); | |
441 | ||
442 | for (j = 0; j < urb_pool_size; j++) { | |
443 | urb = usb_alloc_urb(0, GFP_KERNEL); | |
444 | if (!urb) { | |
445 | err("No free urbs available"); | |
446 | goto no_rx_urb; | |
447 | } | |
448 | buf_size = port->read_urb->transfer_buffer_length; | |
449 | urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); | |
450 | if (!urb->transfer_buffer) { | |
451 | err("Couldn't allocate urb buffer"); | |
452 | goto no_rx_buf; | |
453 | } | |
454 | wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); | |
455 | if (!wrap) { | |
456 | err("Couldn't allocate urb wrapper"); | |
457 | goto no_rx_wrap; | |
458 | } | |
459 | usb_fill_bulk_urb(urb, serial->dev, | |
460 | usb_rcvbulkpipe(serial->dev, | |
461 | port->bulk_in_endpointAddress), | |
462 | urb->transfer_buffer, buf_size, | |
463 | whiteheat_read_callback, port); | |
464 | wrap->urb = urb; | |
465 | list_add(&wrap->list, &info->rx_urbs_free); | |
466 | ||
467 | urb = usb_alloc_urb(0, GFP_KERNEL); | |
468 | if (!urb) { | |
469 | err("No free urbs available"); | |
470 | goto no_tx_urb; | |
471 | } | |
472 | buf_size = port->write_urb->transfer_buffer_length; | |
473 | urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL); | |
474 | if (!urb->transfer_buffer) { | |
475 | err("Couldn't allocate urb buffer"); | |
476 | goto no_tx_buf; | |
477 | } | |
478 | wrap = kmalloc(sizeof(*wrap), GFP_KERNEL); | |
479 | if (!wrap) { | |
480 | err("Couldn't allocate urb wrapper"); | |
481 | goto no_tx_wrap; | |
482 | } | |
483 | usb_fill_bulk_urb(urb, serial->dev, | |
484 | usb_sndbulkpipe(serial->dev, | |
485 | port->bulk_out_endpointAddress), | |
486 | urb->transfer_buffer, buf_size, | |
487 | whiteheat_write_callback, port); | |
488 | wrap->urb = urb; | |
489 | list_add(&wrap->list, &info->tx_urbs_free); | |
490 | } | |
491 | ||
492 | usb_set_serial_port_data(port, info); | |
493 | } | |
494 | ||
5cbded58 | 495 | command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); |
1da177e4 | 496 | if (command_info == NULL) { |
269bda1c | 497 | err("%s: Out of memory for port structures\n", serial->type->description); |
1da177e4 LT |
498 | goto no_command_private; |
499 | } | |
500 | ||
08a2b3b6 | 501 | mutex_init(&command_info->mutex); |
1da177e4 LT |
502 | command_info->port_running = 0; |
503 | init_waitqueue_head(&command_info->wait_command); | |
504 | usb_set_serial_port_data(command_port, command_info); | |
505 | command_port->write_urb->complete = command_port_write_callback; | |
506 | command_port->read_urb->complete = command_port_read_callback; | |
507 | kfree(result); | |
508 | kfree(command); | |
509 | ||
510 | return 0; | |
511 | ||
512 | no_firmware: | |
513 | /* Firmware likely not running */ | |
269bda1c GKH |
514 | err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); |
515 | err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description); | |
516 | err("%s: please contact support@connecttech.com\n", serial->type->description); | |
67ca0284 | 517 | kfree(result); |
1da177e4 LT |
518 | return -ENODEV; |
519 | ||
520 | no_command_private: | |
521 | for (i = serial->num_ports - 1; i >= 0; i--) { | |
522 | port = serial->port[i]; | |
523 | info = usb_get_serial_port_data(port); | |
524 | for (j = urb_pool_size - 1; j >= 0; j--) { | |
525 | tmp = list_first(&info->tx_urbs_free); | |
526 | list_del(tmp); | |
527 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
528 | urb = wrap->urb; | |
529 | kfree(wrap); | |
530 | no_tx_wrap: | |
531 | kfree(urb->transfer_buffer); | |
532 | no_tx_buf: | |
533 | usb_free_urb(urb); | |
534 | no_tx_urb: | |
535 | tmp = list_first(&info->rx_urbs_free); | |
536 | list_del(tmp); | |
537 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
538 | urb = wrap->urb; | |
539 | kfree(wrap); | |
540 | no_rx_wrap: | |
541 | kfree(urb->transfer_buffer); | |
542 | no_rx_buf: | |
543 | usb_free_urb(urb); | |
544 | no_rx_urb: | |
545 | ; | |
546 | } | |
547 | kfree(info); | |
548 | no_private: | |
549 | ; | |
550 | } | |
551 | kfree(result); | |
552 | no_result_buffer: | |
553 | kfree(command); | |
554 | no_command_buffer: | |
555 | return -ENOMEM; | |
556 | } | |
557 | ||
558 | ||
559 | static void whiteheat_shutdown (struct usb_serial *serial) | |
560 | { | |
561 | struct usb_serial_port *command_port; | |
562 | struct usb_serial_port *port; | |
563 | struct whiteheat_private *info; | |
564 | struct whiteheat_urb_wrap *wrap; | |
565 | struct urb *urb; | |
566 | struct list_head *tmp; | |
567 | struct list_head *tmp2; | |
568 | int i; | |
569 | ||
570 | dbg("%s", __FUNCTION__); | |
571 | ||
572 | /* free up our private data for our command port */ | |
573 | command_port = serial->port[COMMAND_PORT]; | |
574 | kfree (usb_get_serial_port_data(command_port)); | |
575 | ||
576 | for (i = 0; i < serial->num_ports; i++) { | |
577 | port = serial->port[i]; | |
578 | info = usb_get_serial_port_data(port); | |
579 | list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { | |
580 | list_del(tmp); | |
581 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
582 | urb = wrap->urb; | |
583 | kfree(wrap); | |
584 | kfree(urb->transfer_buffer); | |
585 | usb_free_urb(urb); | |
586 | } | |
587 | list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) { | |
588 | list_del(tmp); | |
589 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
590 | urb = wrap->urb; | |
591 | kfree(wrap); | |
592 | kfree(urb->transfer_buffer); | |
593 | usb_free_urb(urb); | |
594 | } | |
595 | kfree(info); | |
596 | } | |
597 | ||
598 | return; | |
599 | } | |
600 | ||
601 | ||
602 | static int whiteheat_open (struct usb_serial_port *port, struct file *filp) | |
603 | { | |
604 | int retval = 0; | |
606d099c | 605 | struct ktermios old_term; |
1da177e4 LT |
606 | |
607 | dbg("%s - port %d", __FUNCTION__, port->number); | |
608 | ||
609 | retval = start_command_port(port->serial); | |
610 | if (retval) | |
611 | goto exit; | |
612 | ||
613 | if (port->tty) | |
614 | port->tty->low_latency = 1; | |
615 | ||
616 | /* send an open port command */ | |
617 | retval = firm_open(port); | |
618 | if (retval) { | |
619 | stop_command_port(port->serial); | |
620 | goto exit; | |
621 | } | |
622 | ||
623 | retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX); | |
624 | if (retval) { | |
625 | firm_close(port); | |
626 | stop_command_port(port->serial); | |
627 | goto exit; | |
628 | } | |
629 | ||
630 | old_term.c_cflag = ~port->tty->termios->c_cflag; | |
631 | old_term.c_iflag = ~port->tty->termios->c_iflag; | |
632 | whiteheat_set_termios(port, &old_term); | |
633 | ||
634 | /* Work around HCD bugs */ | |
635 | usb_clear_halt(port->serial->dev, port->read_urb->pipe); | |
636 | usb_clear_halt(port->serial->dev, port->write_urb->pipe); | |
637 | ||
638 | /* Start reading from the device */ | |
639 | retval = start_port_read(port); | |
640 | if (retval) { | |
641 | err("%s - failed submitting read urb, error %d", __FUNCTION__, retval); | |
642 | firm_close(port); | |
643 | stop_command_port(port->serial); | |
644 | goto exit; | |
645 | } | |
646 | ||
647 | exit: | |
648 | dbg("%s - exit, retval = %d", __FUNCTION__, retval); | |
649 | return retval; | |
650 | } | |
651 | ||
652 | ||
653 | static void whiteheat_close(struct usb_serial_port *port, struct file * filp) | |
654 | { | |
655 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
656 | struct whiteheat_urb_wrap *wrap; | |
657 | struct urb *urb; | |
658 | struct list_head *tmp; | |
659 | struct list_head *tmp2; | |
1da177e4 LT |
660 | |
661 | dbg("%s - port %d", __FUNCTION__, port->number); | |
662 | ||
663 | /* filp is NULL when called from usb_serial_disconnect */ | |
664 | if (filp && (tty_hung_up_p(filp))) { | |
665 | return; | |
666 | } | |
667 | ||
668 | port->tty->closing = 1; | |
669 | ||
670 | /* | |
671 | * Not currently in use; tty_wait_until_sent() calls | |
672 | * serial_chars_in_buffer() which deadlocks on the second semaphore | |
673 | * acquisition. This should be fixed at some point. Greg's been | |
674 | * notified. | |
675 | if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) { | |
676 | tty_wait_until_sent(port->tty, CLOSING_DELAY); | |
677 | } | |
678 | */ | |
679 | ||
680 | if (port->tty->driver->flush_buffer) | |
681 | port->tty->driver->flush_buffer(port->tty); | |
682 | tty_ldisc_flush(port->tty); | |
683 | ||
684 | firm_report_tx_done(port); | |
685 | ||
686 | firm_close(port); | |
687 | ||
08a2b3b6 | 688 | printk(KERN_ERR"Before processing rx_urbs_submitted.\n"); |
1da177e4 | 689 | /* shutdown our bulk reads and writes */ |
08a2b3b6 ON |
690 | mutex_lock(&info->deathwarrant); |
691 | spin_lock_irq(&info->lock); | |
1da177e4 LT |
692 | list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { |
693 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
694 | urb = wrap->urb; | |
08a2b3b6 ON |
695 | list_del(tmp); |
696 | spin_unlock_irq(&info->lock); | |
1da177e4 | 697 | usb_kill_urb(urb); |
08a2b3b6 ON |
698 | spin_lock_irq(&info->lock); |
699 | list_add(tmp, &info->rx_urbs_free); | |
1da177e4 | 700 | } |
179e0917 AM |
701 | list_for_each_safe(tmp, tmp2, &info->rx_urb_q) |
702 | list_move(tmp, &info->rx_urbs_free); | |
1da177e4 LT |
703 | list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) { |
704 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
705 | urb = wrap->urb; | |
08a2b3b6 ON |
706 | list_del(tmp); |
707 | spin_unlock_irq(&info->lock); | |
1da177e4 | 708 | usb_kill_urb(urb); |
08a2b3b6 ON |
709 | spin_lock_irq(&info->lock); |
710 | list_add(tmp, &info->tx_urbs_free); | |
1da177e4 | 711 | } |
08a2b3b6 ON |
712 | spin_unlock_irq(&info->lock); |
713 | mutex_unlock(&info->deathwarrant); | |
1da177e4 LT |
714 | |
715 | stop_command_port(port->serial); | |
716 | ||
717 | port->tty->closing = 0; | |
718 | } | |
719 | ||
720 | ||
721 | static int whiteheat_write(struct usb_serial_port *port, const unsigned char *buf, int count) | |
722 | { | |
723 | struct usb_serial *serial = port->serial; | |
724 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
725 | struct whiteheat_urb_wrap *wrap; | |
726 | struct urb *urb; | |
727 | int result; | |
728 | int bytes; | |
729 | int sent = 0; | |
730 | unsigned long flags; | |
731 | struct list_head *tmp; | |
732 | ||
733 | dbg("%s - port %d", __FUNCTION__, port->number); | |
734 | ||
735 | if (count == 0) { | |
736 | dbg("%s - write request of 0 bytes", __FUNCTION__); | |
737 | return (0); | |
738 | } | |
739 | ||
740 | while (count) { | |
741 | spin_lock_irqsave(&info->lock, flags); | |
742 | if (list_empty(&info->tx_urbs_free)) { | |
743 | spin_unlock_irqrestore(&info->lock, flags); | |
744 | break; | |
745 | } | |
746 | tmp = list_first(&info->tx_urbs_free); | |
747 | list_del(tmp); | |
748 | spin_unlock_irqrestore(&info->lock, flags); | |
749 | ||
750 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
751 | urb = wrap->urb; | |
752 | bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count; | |
753 | memcpy (urb->transfer_buffer, buf + sent, bytes); | |
754 | ||
755 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, bytes, urb->transfer_buffer); | |
756 | ||
757 | urb->dev = serial->dev; | |
758 | urb->transfer_buffer_length = bytes; | |
759 | result = usb_submit_urb(urb, GFP_ATOMIC); | |
760 | if (result) { | |
761 | err("%s - failed submitting write urb, error %d", __FUNCTION__, result); | |
762 | sent = result; | |
763 | spin_lock_irqsave(&info->lock, flags); | |
764 | list_add(tmp, &info->tx_urbs_free); | |
765 | spin_unlock_irqrestore(&info->lock, flags); | |
766 | break; | |
767 | } else { | |
768 | sent += bytes; | |
769 | count -= bytes; | |
770 | spin_lock_irqsave(&info->lock, flags); | |
771 | list_add(tmp, &info->tx_urbs_submitted); | |
772 | spin_unlock_irqrestore(&info->lock, flags); | |
773 | } | |
774 | } | |
775 | ||
776 | return sent; | |
777 | } | |
778 | ||
779 | ||
780 | static int whiteheat_write_room(struct usb_serial_port *port) | |
781 | { | |
782 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
783 | struct list_head *tmp; | |
784 | int room = 0; | |
785 | unsigned long flags; | |
786 | ||
787 | dbg("%s - port %d", __FUNCTION__, port->number); | |
788 | ||
789 | spin_lock_irqsave(&info->lock, flags); | |
790 | list_for_each(tmp, &info->tx_urbs_free) | |
791 | room++; | |
792 | spin_unlock_irqrestore(&info->lock, flags); | |
793 | room *= port->bulk_out_size; | |
794 | ||
795 | dbg("%s - returns %d", __FUNCTION__, room); | |
796 | return (room); | |
797 | } | |
798 | ||
799 | ||
800 | static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file) | |
801 | { | |
802 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
803 | unsigned int modem_signals = 0; | |
804 | ||
805 | dbg("%s - port %d", __FUNCTION__, port->number); | |
806 | ||
807 | firm_get_dtr_rts(port); | |
808 | if (info->mcr & UART_MCR_DTR) | |
809 | modem_signals |= TIOCM_DTR; | |
810 | if (info->mcr & UART_MCR_RTS) | |
811 | modem_signals |= TIOCM_RTS; | |
812 | ||
813 | return modem_signals; | |
814 | } | |
815 | ||
816 | ||
817 | static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file, | |
818 | unsigned int set, unsigned int clear) | |
819 | { | |
820 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
821 | ||
822 | dbg("%s - port %d", __FUNCTION__, port->number); | |
823 | ||
824 | if (set & TIOCM_RTS) | |
825 | info->mcr |= UART_MCR_RTS; | |
826 | if (set & TIOCM_DTR) | |
827 | info->mcr |= UART_MCR_DTR; | |
828 | ||
829 | if (clear & TIOCM_RTS) | |
830 | info->mcr &= ~UART_MCR_RTS; | |
831 | if (clear & TIOCM_DTR) | |
832 | info->mcr &= ~UART_MCR_DTR; | |
833 | ||
834 | firm_set_dtr(port, info->mcr & UART_MCR_DTR); | |
835 | firm_set_rts(port, info->mcr & UART_MCR_RTS); | |
836 | return 0; | |
837 | } | |
838 | ||
839 | ||
840 | static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) | |
841 | { | |
842 | struct serial_struct serstruct; | |
843 | void __user *user_arg = (void __user *)arg; | |
844 | ||
845 | dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); | |
846 | ||
847 | switch (cmd) { | |
848 | case TIOCGSERIAL: | |
849 | memset(&serstruct, 0, sizeof(serstruct)); | |
850 | serstruct.type = PORT_16654; | |
851 | serstruct.line = port->serial->minor; | |
852 | serstruct.port = port->number; | |
853 | serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; | |
854 | serstruct.xmit_fifo_size = port->bulk_out_size; | |
855 | serstruct.custom_divisor = 0; | |
856 | serstruct.baud_base = 460800; | |
857 | serstruct.close_delay = CLOSING_DELAY; | |
858 | serstruct.closing_wait = CLOSING_DELAY; | |
859 | ||
860 | if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) | |
861 | return -EFAULT; | |
862 | ||
863 | break; | |
864 | ||
865 | case TIOCSSERIAL: | |
866 | if (copy_from_user(&serstruct, user_arg, sizeof(serstruct))) | |
867 | return -EFAULT; | |
868 | ||
869 | /* | |
870 | * For now this is ignored. dip sets the ASYNC_[V]HI flags | |
871 | * but this isn't used by us at all. Maybe someone somewhere | |
872 | * will need the custom_divisor setting. | |
873 | */ | |
874 | ||
875 | break; | |
876 | ||
877 | default: | |
878 | break; | |
879 | } | |
880 | ||
881 | return -ENOIOCTLCMD; | |
882 | } | |
883 | ||
884 | ||
08a2b3b6 | 885 | static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios) |
1da177e4 LT |
886 | { |
887 | dbg("%s -port %d", __FUNCTION__, port->number); | |
888 | ||
889 | if ((!port->tty) || (!port->tty->termios)) { | |
890 | dbg("%s - no tty structures", __FUNCTION__); | |
891 | goto exit; | |
892 | } | |
893 | ||
894 | /* check that they really want us to change something */ | |
895 | if (old_termios) { | |
896 | if ((port->tty->termios->c_cflag == old_termios->c_cflag) && | |
897 | (port->tty->termios->c_iflag == old_termios->c_iflag)) { | |
898 | dbg("%s - nothing to change...", __FUNCTION__); | |
899 | goto exit; | |
900 | } | |
901 | } | |
902 | ||
903 | firm_setup_port(port); | |
904 | ||
905 | exit: | |
906 | return; | |
907 | } | |
908 | ||
909 | ||
910 | static void whiteheat_break_ctl(struct usb_serial_port *port, int break_state) { | |
911 | firm_set_break(port, break_state); | |
912 | } | |
913 | ||
914 | ||
915 | static int whiteheat_chars_in_buffer(struct usb_serial_port *port) | |
916 | { | |
917 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
918 | struct list_head *tmp; | |
919 | struct whiteheat_urb_wrap *wrap; | |
920 | int chars = 0; | |
921 | unsigned long flags; | |
922 | ||
923 | dbg("%s - port %d", __FUNCTION__, port->number); | |
924 | ||
925 | spin_lock_irqsave(&info->lock, flags); | |
926 | list_for_each(tmp, &info->tx_urbs_submitted) { | |
927 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
928 | chars += wrap->urb->transfer_buffer_length; | |
929 | } | |
930 | spin_unlock_irqrestore(&info->lock, flags); | |
931 | ||
932 | dbg ("%s - returns %d", __FUNCTION__, chars); | |
08a2b3b6 | 933 | return chars; |
1da177e4 LT |
934 | } |
935 | ||
936 | ||
937 | static void whiteheat_throttle (struct usb_serial_port *port) | |
938 | { | |
939 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
940 | unsigned long flags; | |
941 | ||
942 | dbg("%s - port %d", __FUNCTION__, port->number); | |
943 | ||
944 | spin_lock_irqsave(&info->lock, flags); | |
945 | info->flags |= THROTTLED; | |
946 | spin_unlock_irqrestore(&info->lock, flags); | |
947 | ||
948 | return; | |
949 | } | |
950 | ||
951 | ||
952 | static void whiteheat_unthrottle (struct usb_serial_port *port) | |
953 | { | |
954 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
955 | int actually_throttled; | |
956 | unsigned long flags; | |
957 | ||
958 | dbg("%s - port %d", __FUNCTION__, port->number); | |
959 | ||
960 | spin_lock_irqsave(&info->lock, flags); | |
961 | actually_throttled = info->flags & ACTUALLY_THROTTLED; | |
962 | info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED); | |
963 | spin_unlock_irqrestore(&info->lock, flags); | |
964 | ||
965 | if (actually_throttled) | |
c4028958 | 966 | rx_data_softint(&info->rx_work); |
1da177e4 LT |
967 | |
968 | return; | |
969 | } | |
970 | ||
971 | ||
972 | /***************************************************************************** | |
973 | * Connect Tech's White Heat callback routines | |
974 | *****************************************************************************/ | |
08a2b3b6 | 975 | static void command_port_write_callback(struct urb *urb) |
1da177e4 LT |
976 | { |
977 | dbg("%s", __FUNCTION__); | |
978 | ||
979 | if (urb->status) { | |
980 | dbg ("nonzero urb status: %d", urb->status); | |
981 | return; | |
982 | } | |
983 | } | |
984 | ||
985 | ||
08a2b3b6 | 986 | static void command_port_read_callback(struct urb *urb) |
1da177e4 LT |
987 | { |
988 | struct usb_serial_port *command_port = (struct usb_serial_port *)urb->context; | |
989 | struct whiteheat_command_private *command_info; | |
990 | unsigned char *data = urb->transfer_buffer; | |
991 | int result; | |
1da177e4 LT |
992 | |
993 | dbg("%s", __FUNCTION__); | |
994 | ||
08a2b3b6 ON |
995 | command_info = usb_get_serial_port_data(command_port); |
996 | if (!command_info) { | |
997 | dbg ("%s - command_info is NULL, exiting.", __FUNCTION__); | |
998 | return; | |
999 | } | |
1da177e4 LT |
1000 | if (urb->status) { |
1001 | dbg("%s - nonzero urb status: %d", __FUNCTION__, urb->status); | |
08a2b3b6 ON |
1002 | if (urb->status != -ENOENT) |
1003 | command_info->command_finished = WHITEHEAT_CMD_FAILURE; | |
1004 | wake_up(&command_info->wait_command); | |
1da177e4 LT |
1005 | return; |
1006 | } | |
1007 | ||
1008 | usb_serial_debug_data(debug, &command_port->dev, __FUNCTION__, urb->actual_length, data); | |
1009 | ||
1da177e4 LT |
1010 | if (data[0] == WHITEHEAT_CMD_COMPLETE) { |
1011 | command_info->command_finished = WHITEHEAT_CMD_COMPLETE; | |
08a2b3b6 | 1012 | wake_up(&command_info->wait_command); |
1da177e4 LT |
1013 | } else if (data[0] == WHITEHEAT_CMD_FAILURE) { |
1014 | command_info->command_finished = WHITEHEAT_CMD_FAILURE; | |
08a2b3b6 | 1015 | wake_up(&command_info->wait_command); |
1da177e4 LT |
1016 | } else if (data[0] == WHITEHEAT_EVENT) { |
1017 | /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */ | |
1018 | dbg("%s - event received", __FUNCTION__); | |
1019 | } else if (data[0] == WHITEHEAT_GET_DTR_RTS) { | |
1020 | memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1); | |
1021 | command_info->command_finished = WHITEHEAT_CMD_COMPLETE; | |
08a2b3b6 | 1022 | wake_up(&command_info->wait_command); |
1da177e4 LT |
1023 | } else { |
1024 | dbg("%s - bad reply from firmware", __FUNCTION__); | |
1025 | } | |
1026 | ||
1027 | /* Continue trying to always read */ | |
1028 | command_port->read_urb->dev = command_port->serial->dev; | |
1029 | result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); | |
1da177e4 LT |
1030 | if (result) |
1031 | dbg("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); | |
1032 | } | |
1033 | ||
1034 | ||
7d12e780 | 1035 | static void whiteheat_read_callback(struct urb *urb) |
1da177e4 LT |
1036 | { |
1037 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; | |
1038 | struct whiteheat_urb_wrap *wrap; | |
1039 | unsigned char *data = urb->transfer_buffer; | |
1040 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
1041 | ||
1042 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1043 | ||
1044 | spin_lock(&info->lock); | |
1045 | wrap = urb_to_wrap(urb, &info->rx_urbs_submitted); | |
1046 | if (!wrap) { | |
1047 | spin_unlock(&info->lock); | |
1048 | err("%s - Not my urb!", __FUNCTION__); | |
1049 | return; | |
1050 | } | |
1051 | list_del(&wrap->list); | |
1052 | spin_unlock(&info->lock); | |
1053 | ||
1054 | if (urb->status) { | |
1055 | dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); | |
1056 | spin_lock(&info->lock); | |
1057 | list_add(&wrap->list, &info->rx_urbs_free); | |
1058 | spin_unlock(&info->lock); | |
1059 | return; | |
1060 | } | |
1061 | ||
1062 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); | |
1063 | ||
1064 | spin_lock(&info->lock); | |
1065 | list_add_tail(&wrap->list, &info->rx_urb_q); | |
1066 | if (info->flags & THROTTLED) { | |
1067 | info->flags |= ACTUALLY_THROTTLED; | |
1068 | spin_unlock(&info->lock); | |
1069 | return; | |
1070 | } | |
1071 | spin_unlock(&info->lock); | |
1072 | ||
1073 | schedule_work(&info->rx_work); | |
1074 | } | |
1075 | ||
1076 | ||
7d12e780 | 1077 | static void whiteheat_write_callback(struct urb *urb) |
1da177e4 LT |
1078 | { |
1079 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; | |
1080 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
1081 | struct whiteheat_urb_wrap *wrap; | |
1082 | ||
1083 | dbg("%s - port %d", __FUNCTION__, port->number); | |
1084 | ||
1085 | spin_lock(&info->lock); | |
1086 | wrap = urb_to_wrap(urb, &info->tx_urbs_submitted); | |
1087 | if (!wrap) { | |
1088 | spin_unlock(&info->lock); | |
1089 | err("%s - Not my urb!", __FUNCTION__); | |
1090 | return; | |
1091 | } | |
179e0917 | 1092 | list_move(&wrap->list, &info->tx_urbs_free); |
1da177e4 LT |
1093 | spin_unlock(&info->lock); |
1094 | ||
1095 | if (urb->status) { | |
1096 | dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); | |
1097 | return; | |
1098 | } | |
1099 | ||
cf2c7481 | 1100 | usb_serial_port_softint(port); |
1da177e4 LT |
1101 | } |
1102 | ||
1103 | ||
1104 | /***************************************************************************** | |
1105 | * Connect Tech's White Heat firmware interface | |
1106 | *****************************************************************************/ | |
08a2b3b6 | 1107 | static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize) |
1da177e4 LT |
1108 | { |
1109 | struct usb_serial_port *command_port; | |
1110 | struct whiteheat_command_private *command_info; | |
1111 | struct whiteheat_private *info; | |
1112 | __u8 *transfer_buffer; | |
1113 | int retval = 0; | |
08a2b3b6 | 1114 | int t; |
1da177e4 LT |
1115 | |
1116 | dbg("%s - command %d", __FUNCTION__, command); | |
1117 | ||
1118 | command_port = port->serial->port[COMMAND_PORT]; | |
1119 | command_info = usb_get_serial_port_data(command_port); | |
08a2b3b6 | 1120 | mutex_lock(&command_info->mutex); |
38c3cb5b | 1121 | command_info->command_finished = false; |
1da177e4 LT |
1122 | |
1123 | transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; | |
1124 | transfer_buffer[0] = command; | |
1125 | memcpy (&transfer_buffer[1], data, datasize); | |
1126 | command_port->write_urb->transfer_buffer_length = datasize + 1; | |
1127 | command_port->write_urb->dev = port->serial->dev; | |
08a2b3b6 | 1128 | retval = usb_submit_urb (command_port->write_urb, GFP_NOIO); |
1da177e4 LT |
1129 | if (retval) { |
1130 | dbg("%s - submit urb failed", __FUNCTION__); | |
1131 | goto exit; | |
1132 | } | |
1da177e4 LT |
1133 | |
1134 | /* wait for the command to complete */ | |
08a2b3b6 | 1135 | t = wait_event_timeout(command_info->wait_command, |
38c3cb5b | 1136 | (bool)command_info->command_finished, COMMAND_TIMEOUT); |
08a2b3b6 ON |
1137 | if (!t) |
1138 | usb_kill_urb(command_port->write_urb); | |
1da177e4 | 1139 | |
38c3cb5b | 1140 | if (command_info->command_finished == false) { |
1da177e4 LT |
1141 | dbg("%s - command timed out.", __FUNCTION__); |
1142 | retval = -ETIMEDOUT; | |
1143 | goto exit; | |
1144 | } | |
1145 | ||
1146 | if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { | |
1147 | dbg("%s - command failed.", __FUNCTION__); | |
1148 | retval = -EIO; | |
1149 | goto exit; | |
1150 | } | |
1151 | ||
1152 | if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { | |
1153 | dbg("%s - command completed.", __FUNCTION__); | |
1154 | switch (command) { | |
1155 | case WHITEHEAT_GET_DTR_RTS: | |
1156 | info = usb_get_serial_port_data(port); | |
1157 | memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info)); | |
1158 | break; | |
1159 | } | |
1160 | } | |
1161 | ||
1162 | exit: | |
08a2b3b6 | 1163 | mutex_unlock(&command_info->mutex); |
1da177e4 LT |
1164 | return retval; |
1165 | } | |
1166 | ||
1167 | ||
1168 | static int firm_open(struct usb_serial_port *port) { | |
1169 | struct whiteheat_simple open_command; | |
1170 | ||
1171 | open_command.port = port->number - port->serial->minor + 1; | |
1172 | return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command)); | |
1173 | } | |
1174 | ||
1175 | ||
1176 | static int firm_close(struct usb_serial_port *port) { | |
1177 | struct whiteheat_simple close_command; | |
1178 | ||
1179 | close_command.port = port->number - port->serial->minor + 1; | |
1180 | return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command)); | |
1181 | } | |
1182 | ||
1183 | ||
1184 | static int firm_setup_port(struct usb_serial_port *port) { | |
1185 | struct whiteheat_port_settings port_settings; | |
1186 | unsigned int cflag = port->tty->termios->c_cflag; | |
1187 | ||
1188 | port_settings.port = port->number + 1; | |
1189 | ||
1190 | /* get the byte size */ | |
1191 | switch (cflag & CSIZE) { | |
1192 | case CS5: port_settings.bits = 5; break; | |
1193 | case CS6: port_settings.bits = 6; break; | |
1194 | case CS7: port_settings.bits = 7; break; | |
1195 | default: | |
1196 | case CS8: port_settings.bits = 8; break; | |
1197 | } | |
1198 | dbg("%s - data bits = %d", __FUNCTION__, port_settings.bits); | |
1199 | ||
1200 | /* determine the parity */ | |
1201 | if (cflag & PARENB) | |
1202 | if (cflag & CMSPAR) | |
1203 | if (cflag & PARODD) | |
1204 | port_settings.parity = WHITEHEAT_PAR_MARK; | |
1205 | else | |
1206 | port_settings.parity = WHITEHEAT_PAR_SPACE; | |
1207 | else | |
1208 | if (cflag & PARODD) | |
1209 | port_settings.parity = WHITEHEAT_PAR_ODD; | |
1210 | else | |
1211 | port_settings.parity = WHITEHEAT_PAR_EVEN; | |
1212 | else | |
1213 | port_settings.parity = WHITEHEAT_PAR_NONE; | |
1214 | dbg("%s - parity = %c", __FUNCTION__, port_settings.parity); | |
1215 | ||
1216 | /* figure out the stop bits requested */ | |
1217 | if (cflag & CSTOPB) | |
1218 | port_settings.stop = 2; | |
1219 | else | |
1220 | port_settings.stop = 1; | |
1221 | dbg("%s - stop bits = %d", __FUNCTION__, port_settings.stop); | |
1222 | ||
1223 | /* figure out the flow control settings */ | |
1224 | if (cflag & CRTSCTS) | |
1225 | port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS); | |
1226 | else | |
1227 | port_settings.hflow = WHITEHEAT_HFLOW_NONE; | |
1228 | dbg("%s - hardware flow control = %s %s %s %s", __FUNCTION__, | |
1229 | (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", | |
1230 | (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", | |
1231 | (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", | |
1232 | (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : ""); | |
1233 | ||
1234 | /* determine software flow control */ | |
1235 | if (I_IXOFF(port->tty)) | |
1236 | port_settings.sflow = WHITEHEAT_SFLOW_RXTX; | |
1237 | else | |
1238 | port_settings.sflow = WHITEHEAT_SFLOW_NONE; | |
1239 | dbg("%s - software flow control = %c", __FUNCTION__, port_settings.sflow); | |
1240 | ||
1241 | port_settings.xon = START_CHAR(port->tty); | |
1242 | port_settings.xoff = STOP_CHAR(port->tty); | |
1243 | dbg("%s - XON = %2x, XOFF = %2x", __FUNCTION__, port_settings.xon, port_settings.xoff); | |
1244 | ||
1245 | /* get the baud rate wanted */ | |
1246 | port_settings.baud = tty_get_baud_rate(port->tty); | |
1247 | dbg("%s - baud rate = %d", __FUNCTION__, port_settings.baud); | |
1248 | ||
1249 | /* handle any settings that aren't specified in the tty structure */ | |
1250 | port_settings.lloop = 0; | |
1251 | ||
1252 | /* now send the message to the device */ | |
1253 | return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings)); | |
1254 | } | |
1255 | ||
1256 | ||
1257 | static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) { | |
1258 | struct whiteheat_set_rdb rts_command; | |
1259 | ||
1260 | rts_command.port = port->number - port->serial->minor + 1; | |
1261 | rts_command.state = onoff; | |
1262 | return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command)); | |
1263 | } | |
1264 | ||
1265 | ||
1266 | static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) { | |
1267 | struct whiteheat_set_rdb dtr_command; | |
1268 | ||
1269 | dtr_command.port = port->number - port->serial->minor + 1; | |
1270 | dtr_command.state = onoff; | |
1271 | return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command)); | |
1272 | } | |
1273 | ||
1274 | ||
1275 | static int firm_set_break(struct usb_serial_port *port, __u8 onoff) { | |
1276 | struct whiteheat_set_rdb break_command; | |
1277 | ||
1278 | break_command.port = port->number - port->serial->minor + 1; | |
1279 | break_command.state = onoff; | |
1280 | return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command)); | |
1281 | } | |
1282 | ||
1283 | ||
1284 | static int firm_purge(struct usb_serial_port *port, __u8 rxtx) { | |
1285 | struct whiteheat_purge purge_command; | |
1286 | ||
1287 | purge_command.port = port->number - port->serial->minor + 1; | |
1288 | purge_command.what = rxtx; | |
1289 | return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command)); | |
1290 | } | |
1291 | ||
1292 | ||
1293 | static int firm_get_dtr_rts(struct usb_serial_port *port) { | |
1294 | struct whiteheat_simple get_dr_command; | |
1295 | ||
1296 | get_dr_command.port = port->number - port->serial->minor + 1; | |
1297 | return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command)); | |
1298 | } | |
1299 | ||
1300 | ||
1301 | static int firm_report_tx_done(struct usb_serial_port *port) { | |
1302 | struct whiteheat_simple close_command; | |
1303 | ||
1304 | close_command.port = port->number - port->serial->minor + 1; | |
1305 | return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command)); | |
1306 | } | |
1307 | ||
1308 | ||
1309 | /***************************************************************************** | |
1310 | * Connect Tech's White Heat utility functions | |
1311 | *****************************************************************************/ | |
1312 | static int start_command_port(struct usb_serial *serial) | |
1313 | { | |
1314 | struct usb_serial_port *command_port; | |
1315 | struct whiteheat_command_private *command_info; | |
1da177e4 LT |
1316 | int retval = 0; |
1317 | ||
1318 | command_port = serial->port[COMMAND_PORT]; | |
1319 | command_info = usb_get_serial_port_data(command_port); | |
08a2b3b6 | 1320 | mutex_lock(&command_info->mutex); |
1da177e4 LT |
1321 | if (!command_info->port_running) { |
1322 | /* Work around HCD bugs */ | |
1323 | usb_clear_halt(serial->dev, command_port->read_urb->pipe); | |
1324 | ||
1325 | command_port->read_urb->dev = serial->dev; | |
1326 | retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); | |
1327 | if (retval) { | |
1328 | err("%s - failed submitting read urb, error %d", __FUNCTION__, retval); | |
1329 | goto exit; | |
1330 | } | |
1331 | } | |
1332 | command_info->port_running++; | |
1333 | ||
1334 | exit: | |
08a2b3b6 | 1335 | mutex_unlock(&command_info->mutex); |
1da177e4 LT |
1336 | return retval; |
1337 | } | |
1338 | ||
1339 | ||
1340 | static void stop_command_port(struct usb_serial *serial) | |
1341 | { | |
1342 | struct usb_serial_port *command_port; | |
1343 | struct whiteheat_command_private *command_info; | |
1da177e4 LT |
1344 | |
1345 | command_port = serial->port[COMMAND_PORT]; | |
1346 | command_info = usb_get_serial_port_data(command_port); | |
08a2b3b6 | 1347 | mutex_lock(&command_info->mutex); |
1da177e4 LT |
1348 | command_info->port_running--; |
1349 | if (!command_info->port_running) | |
1350 | usb_kill_urb(command_port->read_urb); | |
08a2b3b6 | 1351 | mutex_unlock(&command_info->mutex); |
1da177e4 LT |
1352 | } |
1353 | ||
1354 | ||
1355 | static int start_port_read(struct usb_serial_port *port) | |
1356 | { | |
1357 | struct whiteheat_private *info = usb_get_serial_port_data(port); | |
1358 | struct whiteheat_urb_wrap *wrap; | |
1359 | struct urb *urb; | |
1360 | int retval = 0; | |
1361 | unsigned long flags; | |
1362 | struct list_head *tmp; | |
1363 | struct list_head *tmp2; | |
1364 | ||
1365 | spin_lock_irqsave(&info->lock, flags); | |
1366 | ||
1367 | list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) { | |
1368 | list_del(tmp); | |
1369 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
1370 | urb = wrap->urb; | |
1371 | urb->dev = port->serial->dev; | |
08a2b3b6 | 1372 | spin_unlock_irqrestore(&info->lock, flags); |
1da177e4 LT |
1373 | retval = usb_submit_urb(urb, GFP_KERNEL); |
1374 | if (retval) { | |
08a2b3b6 | 1375 | spin_lock_irqsave(&info->lock, flags); |
1da177e4 LT |
1376 | list_add(tmp, &info->rx_urbs_free); |
1377 | list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) { | |
1378 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
1379 | urb = wrap->urb; | |
08a2b3b6 ON |
1380 | list_del(tmp); |
1381 | spin_unlock_irqrestore(&info->lock, flags); | |
1da177e4 | 1382 | usb_kill_urb(urb); |
08a2b3b6 ON |
1383 | spin_lock_irqsave(&info->lock, flags); |
1384 | list_add(tmp, &info->rx_urbs_free); | |
1da177e4 LT |
1385 | } |
1386 | break; | |
1387 | } | |
08a2b3b6 | 1388 | spin_lock_irqsave(&info->lock, flags); |
1da177e4 LT |
1389 | list_add(tmp, &info->rx_urbs_submitted); |
1390 | } | |
1391 | ||
1392 | spin_unlock_irqrestore(&info->lock, flags); | |
1393 | ||
1394 | return retval; | |
1395 | } | |
1396 | ||
1397 | ||
1398 | static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head) | |
1399 | { | |
1400 | struct whiteheat_urb_wrap *wrap; | |
1401 | struct list_head *tmp; | |
1402 | ||
1403 | list_for_each(tmp, head) { | |
1404 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
1405 | if (wrap->urb == urb) | |
1406 | return wrap; | |
1407 | } | |
1408 | ||
1409 | return NULL; | |
1410 | } | |
1411 | ||
1412 | ||
1413 | static struct list_head *list_first(struct list_head *head) | |
1414 | { | |
1415 | return head->next; | |
1416 | } | |
1417 | ||
1418 | ||
c4028958 | 1419 | static void rx_data_softint(struct work_struct *work) |
1da177e4 | 1420 | { |
c4028958 DH |
1421 | struct whiteheat_private *info = |
1422 | container_of(work, struct whiteheat_private, rx_work); | |
1423 | struct usb_serial_port *port = info->port; | |
1da177e4 LT |
1424 | struct tty_struct *tty = port->tty; |
1425 | struct whiteheat_urb_wrap *wrap; | |
1426 | struct urb *urb; | |
1427 | unsigned long flags; | |
1428 | struct list_head *tmp; | |
1429 | struct list_head *tmp2; | |
1430 | int result; | |
1431 | int sent = 0; | |
1432 | ||
1433 | spin_lock_irqsave(&info->lock, flags); | |
1434 | if (info->flags & THROTTLED) { | |
1435 | spin_unlock_irqrestore(&info->lock, flags); | |
1436 | return; | |
1437 | } | |
1438 | ||
1439 | list_for_each_safe(tmp, tmp2, &info->rx_urb_q) { | |
1440 | list_del(tmp); | |
1441 | spin_unlock_irqrestore(&info->lock, flags); | |
1442 | ||
1443 | wrap = list_entry(tmp, struct whiteheat_urb_wrap, list); | |
1444 | urb = wrap->urb; | |
1445 | ||
1446 | if (tty && urb->actual_length) { | |
33f0f88f AC |
1447 | int len = tty_buffer_request_room(tty, urb->actual_length); |
1448 | /* This stuff can go away now I suspect */ | |
1449 | if (unlikely(len < urb->actual_length)) { | |
1da177e4 LT |
1450 | spin_lock_irqsave(&info->lock, flags); |
1451 | list_add(tmp, &info->rx_urb_q); | |
1452 | spin_unlock_irqrestore(&info->lock, flags); | |
1453 | tty_flip_buffer_push(tty); | |
1454 | schedule_work(&info->rx_work); | |
1455 | return; | |
1456 | } | |
33f0f88f AC |
1457 | tty_insert_flip_string(tty, urb->transfer_buffer, len); |
1458 | sent += len; | |
1da177e4 LT |
1459 | } |
1460 | ||
1461 | urb->dev = port->serial->dev; | |
1462 | result = usb_submit_urb(urb, GFP_ATOMIC); | |
1463 | if (result) { | |
1464 | err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result); | |
1465 | spin_lock_irqsave(&info->lock, flags); | |
1466 | list_add(tmp, &info->rx_urbs_free); | |
1467 | continue; | |
1468 | } | |
1469 | ||
1470 | spin_lock_irqsave(&info->lock, flags); | |
1471 | list_add(tmp, &info->rx_urbs_submitted); | |
1472 | } | |
1473 | spin_unlock_irqrestore(&info->lock, flags); | |
1474 | ||
1475 | if (sent) | |
1476 | tty_flip_buffer_push(tty); | |
1477 | } | |
1478 | ||
1479 | ||
1480 | /***************************************************************************** | |
1481 | * Connect Tech's White Heat module functions | |
1482 | *****************************************************************************/ | |
1483 | static int __init whiteheat_init (void) | |
1484 | { | |
1485 | int retval; | |
1486 | retval = usb_serial_register(&whiteheat_fake_device); | |
1487 | if (retval) | |
1488 | goto failed_fake_register; | |
1489 | retval = usb_serial_register(&whiteheat_device); | |
1490 | if (retval) | |
1491 | goto failed_device_register; | |
1492 | retval = usb_register(&whiteheat_driver); | |
1493 | if (retval) | |
1494 | goto failed_usb_register; | |
1495 | info(DRIVER_DESC " " DRIVER_VERSION); | |
1496 | return 0; | |
1497 | failed_usb_register: | |
1498 | usb_serial_deregister(&whiteheat_device); | |
1499 | failed_device_register: | |
1500 | usb_serial_deregister(&whiteheat_fake_device); | |
1501 | failed_fake_register: | |
1502 | return retval; | |
1503 | } | |
1504 | ||
1505 | ||
1506 | static void __exit whiteheat_exit (void) | |
1507 | { | |
1508 | usb_deregister (&whiteheat_driver); | |
1509 | usb_serial_deregister (&whiteheat_fake_device); | |
1510 | usb_serial_deregister (&whiteheat_device); | |
1511 | } | |
1512 | ||
1513 | ||
1514 | module_init(whiteheat_init); | |
1515 | module_exit(whiteheat_exit); | |
1516 | ||
1517 | MODULE_AUTHOR( DRIVER_AUTHOR ); | |
1518 | MODULE_DESCRIPTION( DRIVER_DESC ); | |
1519 | MODULE_LICENSE("GPL"); | |
1520 | ||
1521 | module_param(urb_pool_size, int, 0); | |
1522 | MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering"); | |
1523 | ||
1524 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
1525 | MODULE_PARM_DESC(debug, "Debug enabled or not"); |