Commit | Line | Data |
---|---|---|
619a6f1d GKH |
1 | /* |
2 | * spcp8x5 USB to serial adaptor driver | |
3 | * | |
fa993ca8 | 4 | * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com) |
619a6f1d GKH |
5 | * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) |
6 | * Copyright (C) 2006 S1 Corp. | |
7 | * | |
8 | * Original driver for 2.6.10 pl2303 driver by | |
9 | * Greg Kroah-Hartman (greg@kroah.com) | |
10 | * Changes for 2.6.20 by Harald Klein <hari@vt100.at> | |
11 | * | |
12 | * This program is free software; you can redistribute it and/or modify | |
13 | * it under the terms of the GNU General Public License as published by | |
14 | * the Free Software Foundation; either version 2 of the License, or | |
15 | * (at your option) any later version. | |
16 | * | |
17 | * | |
18 | */ | |
19 | #include <linux/kernel.h> | |
20 | #include <linux/errno.h> | |
21 | #include <linux/init.h> | |
22 | #include <linux/slab.h> | |
23 | #include <linux/tty.h> | |
24 | #include <linux/tty_driver.h> | |
25 | #include <linux/tty_flip.h> | |
26 | #include <linux/module.h> | |
27 | #include <linux/spinlock.h> | |
28 | #include <linux/usb.h> | |
29 | #include <linux/usb/serial.h> | |
30 | ||
619a6f1d GKH |
31 | #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" |
32 | ||
619a6f1d GKH |
33 | #define SPCP8x5_007_VID 0x04FC |
34 | #define SPCP8x5_007_PID 0x0201 | |
35 | #define SPCP8x5_008_VID 0x04fc | |
36 | #define SPCP8x5_008_PID 0x0235 | |
37 | #define SPCP8x5_PHILIPS_VID 0x0471 | |
38 | #define SPCP8x5_PHILIPS_PID 0x081e | |
39 | #define SPCP8x5_INTERMATIC_VID 0x04FC | |
40 | #define SPCP8x5_INTERMATIC_PID 0x0204 | |
41 | #define SPCP8x5_835_VID 0x04fc | |
42 | #define SPCP8x5_835_PID 0x0231 | |
43 | ||
7d40d7e8 | 44 | static const struct usb_device_id id_table[] = { |
619a6f1d GKH |
45 | { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, |
46 | { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, | |
47 | { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, | |
48 | { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, | |
49 | { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)}, | |
50 | { } /* Terminating entry */ | |
51 | }; | |
52 | MODULE_DEVICE_TABLE(usb, id_table); | |
53 | ||
54 | struct spcp8x5_usb_ctrl_arg { | |
55 | u8 type; | |
56 | u8 cmd; | |
57 | u8 cmd_type; | |
58 | u16 value; | |
59 | u16 index; | |
60 | u16 length; | |
61 | }; | |
62 | ||
619a6f1d GKH |
63 | |
64 | /* spcp8x5 spec register define */ | |
65 | #define MCR_CONTROL_LINE_RTS 0x02 | |
66 | #define MCR_CONTROL_LINE_DTR 0x01 | |
67 | #define MCR_DTR 0x01 | |
68 | #define MCR_RTS 0x02 | |
69 | ||
70 | #define MSR_STATUS_LINE_DCD 0x80 | |
71 | #define MSR_STATUS_LINE_RI 0x40 | |
72 | #define MSR_STATUS_LINE_DSR 0x20 | |
73 | #define MSR_STATUS_LINE_CTS 0x10 | |
74 | ||
75 | /* verdor command here , we should define myself */ | |
76 | #define SET_DEFAULT 0x40 | |
77 | #define SET_DEFAULT_TYPE 0x20 | |
78 | ||
79 | #define SET_UART_FORMAT 0x40 | |
80 | #define SET_UART_FORMAT_TYPE 0x21 | |
81 | #define SET_UART_FORMAT_SIZE_5 0x00 | |
82 | #define SET_UART_FORMAT_SIZE_6 0x01 | |
83 | #define SET_UART_FORMAT_SIZE_7 0x02 | |
84 | #define SET_UART_FORMAT_SIZE_8 0x03 | |
85 | #define SET_UART_FORMAT_STOP_1 0x00 | |
86 | #define SET_UART_FORMAT_STOP_2 0x04 | |
87 | #define SET_UART_FORMAT_PAR_NONE 0x00 | |
88 | #define SET_UART_FORMAT_PAR_ODD 0x10 | |
89 | #define SET_UART_FORMAT_PAR_EVEN 0x30 | |
90 | #define SET_UART_FORMAT_PAR_MASK 0xD0 | |
91 | #define SET_UART_FORMAT_PAR_SPACE 0x90 | |
92 | ||
93 | #define GET_UART_STATUS_TYPE 0xc0 | |
94 | #define GET_UART_STATUS 0x22 | |
95 | #define GET_UART_STATUS_MSR 0x06 | |
96 | ||
97 | #define SET_UART_STATUS 0x40 | |
98 | #define SET_UART_STATUS_TYPE 0x23 | |
99 | #define SET_UART_STATUS_MCR 0x0004 | |
100 | #define SET_UART_STATUS_MCR_DTR 0x01 | |
101 | #define SET_UART_STATUS_MCR_RTS 0x02 | |
102 | #define SET_UART_STATUS_MCR_LOOP 0x10 | |
103 | ||
104 | #define SET_WORKING_MODE 0x40 | |
105 | #define SET_WORKING_MODE_TYPE 0x24 | |
106 | #define SET_WORKING_MODE_U2C 0x00 | |
107 | #define SET_WORKING_MODE_RS485 0x01 | |
108 | #define SET_WORKING_MODE_PDMA 0x02 | |
109 | #define SET_WORKING_MODE_SPP 0x03 | |
110 | ||
111 | #define SET_FLOWCTL_CHAR 0x40 | |
112 | #define SET_FLOWCTL_CHAR_TYPE 0x25 | |
113 | ||
114 | #define GET_VERSION 0xc0 | |
115 | #define GET_VERSION_TYPE 0x26 | |
116 | ||
117 | #define SET_REGISTER 0x40 | |
118 | #define SET_REGISTER_TYPE 0x27 | |
119 | ||
120 | #define GET_REGISTER 0xc0 | |
121 | #define GET_REGISTER_TYPE 0x28 | |
122 | ||
123 | #define SET_RAM 0x40 | |
124 | #define SET_RAM_TYPE 0x31 | |
125 | ||
126 | #define GET_RAM 0xc0 | |
127 | #define GET_RAM_TYPE 0x32 | |
128 | ||
129 | /* how come ??? */ | |
130 | #define UART_STATE 0x08 | |
d14fc1a7 | 131 | #define UART_STATE_TRANSIENT_MASK 0x75 |
619a6f1d GKH |
132 | #define UART_DCD 0x01 |
133 | #define UART_DSR 0x02 | |
134 | #define UART_BREAK_ERROR 0x04 | |
135 | #define UART_RING 0x08 | |
136 | #define UART_FRAME_ERROR 0x10 | |
137 | #define UART_PARITY_ERROR 0x20 | |
138 | #define UART_OVERRUN_ERROR 0x40 | |
139 | #define UART_CTS 0x80 | |
140 | ||
141 | enum spcp8x5_type { | |
142 | SPCP825_007_TYPE, | |
143 | SPCP825_008_TYPE, | |
144 | SPCP825_PHILIP_TYPE, | |
145 | SPCP825_INTERMATIC_TYPE, | |
146 | SPCP835_TYPE, | |
147 | }; | |
148 | ||
619a6f1d GKH |
149 | struct spcp8x5_private { |
150 | spinlock_t lock; | |
619a6f1d | 151 | enum spcp8x5_type type; |
619a6f1d GKH |
152 | u8 line_control; |
153 | u8 line_status; | |
619a6f1d GKH |
154 | }; |
155 | ||
bf90ff5f | 156 | static int spcp8x5_port_probe(struct usb_serial_port *port) |
619a6f1d | 157 | { |
bf90ff5f | 158 | struct usb_serial *serial = port->serial; |
619a6f1d | 159 | struct spcp8x5_private *priv; |
619a6f1d | 160 | enum spcp8x5_type type = SPCP825_007_TYPE; |
fd05e720 | 161 | u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); |
619a6f1d | 162 | |
fd05e720 | 163 | if (product == 0x0201) |
619a6f1d | 164 | type = SPCP825_007_TYPE; |
fd05e720 | 165 | else if (product == 0x0231) |
619a6f1d | 166 | type = SPCP835_TYPE; |
fd05e720 | 167 | else if (product == 0x0235) |
619a6f1d | 168 | type = SPCP825_008_TYPE; |
fd05e720 | 169 | else if (product == 0x0204) |
619a6f1d | 170 | type = SPCP825_INTERMATIC_TYPE; |
fd05e720 AV |
171 | else if (product == 0x0471 && |
172 | serial->dev->descriptor.idVendor == cpu_to_le16(0x081e)) | |
619a6f1d GKH |
173 | type = SPCP825_PHILIP_TYPE; |
174 | dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type); | |
175 | ||
bf90ff5f JH |
176 | priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
177 | if (!priv) | |
178 | return -ENOMEM; | |
619a6f1d | 179 | |
bf90ff5f | 180 | spin_lock_init(&priv->lock); |
bf90ff5f JH |
181 | priv->type = type; |
182 | ||
183 | usb_set_serial_port_data(port , priv); | |
619a6f1d GKH |
184 | |
185 | return 0; | |
619a6f1d GKH |
186 | } |
187 | ||
bf90ff5f | 188 | static int spcp8x5_port_remove(struct usb_serial_port *port) |
619a6f1d | 189 | { |
bf90ff5f | 190 | struct spcp8x5_private *priv; |
619a6f1d | 191 | |
bf90ff5f JH |
192 | priv = usb_get_serial_port_data(port); |
193 | kfree(priv); | |
194 | ||
195 | return 0; | |
619a6f1d GKH |
196 | } |
197 | ||
198 | /* set the modem control line of the device. | |
199 | * NOTE spcp825-007 not supported this */ | |
200 | static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value, | |
201 | enum spcp8x5_type type) | |
202 | { | |
203 | int retval; | |
204 | u8 mcr = 0 ; | |
205 | ||
206 | if (type == SPCP825_007_TYPE) | |
207 | return -EPERM; | |
208 | ||
209 | mcr = (unsigned short)value; | |
210 | retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
211 | SET_UART_STATUS_TYPE, SET_UART_STATUS, | |
212 | mcr, 0x04, NULL, 0, 100); | |
213 | if (retval != 0) | |
214 | dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval); | |
215 | return retval; | |
216 | } | |
217 | ||
218 | /* get the modem status register of the device | |
219 | * NOTE spcp825-007 not supported this */ | |
220 | static int spcp8x5_get_msr(struct usb_device *dev, u8 *status, | |
221 | enum spcp8x5_type type) | |
222 | { | |
223 | u8 *status_buffer; | |
224 | int ret; | |
225 | ||
226 | /* I return Permited not support here but seem inval device | |
227 | * is more fix */ | |
228 | if (type == SPCP825_007_TYPE) | |
229 | return -EPERM; | |
230 | if (status == NULL) | |
231 | return -EINVAL; | |
232 | ||
233 | status_buffer = kmalloc(1, GFP_KERNEL); | |
234 | if (!status_buffer) | |
235 | return -ENOMEM; | |
236 | status_buffer[0] = status[0]; | |
237 | ||
238 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), | |
239 | GET_UART_STATUS, GET_UART_STATUS_TYPE, | |
240 | 0, GET_UART_STATUS_MSR, status_buffer, 1, 100); | |
241 | if (ret < 0) | |
242 | dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)", | |
243 | status_buffer, ret); | |
244 | ||
245 | dev_dbg(&dev->dev, "0xc0:0x22:0:6 %d - 0x%p ", ret, status_buffer); | |
246 | status[0] = status_buffer[0]; | |
247 | kfree(status_buffer); | |
248 | ||
249 | return ret; | |
250 | } | |
251 | ||
252 | /* select the work mode. | |
253 | * NOTE this function not supported by spcp825-007 */ | |
254 | static void spcp8x5_set_workMode(struct usb_device *dev, u16 value, | |
255 | u16 index, enum spcp8x5_type type) | |
256 | { | |
257 | int ret; | |
258 | ||
259 | /* I return Permited not support here but seem inval device | |
260 | * is more fix */ | |
261 | if (type == SPCP825_007_TYPE) | |
262 | return; | |
263 | ||
264 | ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
265 | SET_WORKING_MODE_TYPE, SET_WORKING_MODE, | |
266 | value, index, NULL, 0, 100); | |
267 | dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index); | |
268 | if (ret < 0) | |
269 | dev_dbg(&dev->dev, | |
270 | "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret); | |
271 | } | |
272 | ||
335f8514 AC |
273 | static int spcp8x5_carrier_raised(struct usb_serial_port *port) |
274 | { | |
275 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
276 | if (priv->line_status & MSR_STATUS_LINE_DCD) | |
277 | return 1; | |
278 | return 0; | |
279 | } | |
280 | ||
281 | static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) | |
282 | { | |
283 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
284 | unsigned long flags; | |
285 | u8 control; | |
286 | ||
287 | spin_lock_irqsave(&priv->lock, flags); | |
288 | if (on) | |
289 | priv->line_control = MCR_CONTROL_LINE_DTR | |
290 | | MCR_CONTROL_LINE_RTS; | |
291 | else | |
292 | priv->line_control &= ~ (MCR_CONTROL_LINE_DTR | |
293 | | MCR_CONTROL_LINE_RTS); | |
294 | control = priv->line_control; | |
295 | spin_unlock_irqrestore(&priv->lock, flags); | |
296 | spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); | |
297 | } | |
298 | ||
fe1ae7fd AC |
299 | static void spcp8x5_init_termios(struct tty_struct *tty) |
300 | { | |
301 | /* for the 1st time call this function */ | |
adc8d746 AC |
302 | tty->termios = tty_std_termios; |
303 | tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; | |
304 | tty->termios.c_ispeed = 115200; | |
305 | tty->termios.c_ospeed = 115200; | |
fe1ae7fd AC |
306 | } |
307 | ||
619a6f1d | 308 | /* set the serial param for transfer. we should check if we really need to |
95da310e AC |
309 | * transfer. if we set flow control we should do this too. */ |
310 | static void spcp8x5_set_termios(struct tty_struct *tty, | |
311 | struct usb_serial_port *port, struct ktermios *old_termios) | |
619a6f1d GKH |
312 | { |
313 | struct usb_serial *serial = port->serial; | |
314 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
315 | unsigned long flags; | |
adc8d746 | 316 | unsigned int cflag = tty->termios.c_cflag; |
619a6f1d GKH |
317 | unsigned int old_cflag = old_termios->c_cflag; |
318 | unsigned short uartdata; | |
319 | unsigned char buf[2] = {0, 0}; | |
320 | int baud; | |
321 | int i; | |
322 | u8 control; | |
323 | ||
619a6f1d GKH |
324 | |
325 | /* check that they really want us to change something */ | |
adc8d746 | 326 | if (!tty_termios_hw_change(&tty->termios, old_termios)) |
619a6f1d GKH |
327 | return; |
328 | ||
329 | /* set DTR/RTS active */ | |
330 | spin_lock_irqsave(&priv->lock, flags); | |
331 | control = priv->line_control; | |
332 | if ((old_cflag & CBAUD) == B0) { | |
333 | priv->line_control |= MCR_DTR; | |
334 | if (!(old_cflag & CRTSCTS)) | |
335 | priv->line_control |= MCR_RTS; | |
336 | } | |
337 | if (control != priv->line_control) { | |
338 | control = priv->line_control; | |
339 | spin_unlock_irqrestore(&priv->lock, flags); | |
340 | spcp8x5_set_ctrlLine(serial->dev, control , priv->type); | |
341 | } else { | |
342 | spin_unlock_irqrestore(&priv->lock, flags); | |
343 | } | |
344 | ||
345 | /* Set Baud Rate */ | |
a419aef8 | 346 | baud = tty_get_baud_rate(tty); |
619a6f1d GKH |
347 | switch (baud) { |
348 | case 300: buf[0] = 0x00; break; | |
349 | case 600: buf[0] = 0x01; break; | |
350 | case 1200: buf[0] = 0x02; break; | |
351 | case 2400: buf[0] = 0x03; break; | |
352 | case 4800: buf[0] = 0x04; break; | |
353 | case 9600: buf[0] = 0x05; break; | |
354 | case 19200: buf[0] = 0x07; break; | |
355 | case 38400: buf[0] = 0x09; break; | |
356 | case 57600: buf[0] = 0x0a; break; | |
357 | case 115200: buf[0] = 0x0b; break; | |
358 | case 230400: buf[0] = 0x0c; break; | |
359 | case 460800: buf[0] = 0x0d; break; | |
360 | case 921600: buf[0] = 0x0e; break; | |
361 | /* case 1200000: buf[0] = 0x0f; break; */ | |
362 | /* case 2400000: buf[0] = 0x10; break; */ | |
363 | case 3000000: buf[0] = 0x11; break; | |
364 | /* case 6000000: buf[0] = 0x12; break; */ | |
365 | case 0: | |
366 | case 1000000: | |
367 | buf[0] = 0x0b; break; | |
368 | default: | |
194343d9 GKH |
369 | dev_err(&port->dev, "spcp825 driver does not support the " |
370 | "baudrate requested, using default of 9600.\n"); | |
619a6f1d GKH |
371 | } |
372 | ||
373 | /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ | |
374 | if (cflag & CSIZE) { | |
375 | switch (cflag & CSIZE) { | |
376 | case CS5: | |
377 | buf[1] |= SET_UART_FORMAT_SIZE_5; | |
378 | break; | |
379 | case CS6: | |
380 | buf[1] |= SET_UART_FORMAT_SIZE_6; | |
381 | break; | |
382 | case CS7: | |
383 | buf[1] |= SET_UART_FORMAT_SIZE_7; | |
384 | break; | |
385 | default: | |
386 | case CS8: | |
387 | buf[1] |= SET_UART_FORMAT_SIZE_8; | |
388 | break; | |
389 | } | |
390 | } | |
391 | ||
392 | /* Set Stop bit2 : 0:1bit 1:2bit */ | |
393 | buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 : | |
394 | SET_UART_FORMAT_STOP_1; | |
395 | ||
396 | /* Set Parity bit3-4 01:Odd 11:Even */ | |
397 | if (cflag & PARENB) { | |
398 | buf[1] |= (cflag & PARODD) ? | |
399 | SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; | |
400 | } else | |
401 | buf[1] |= SET_UART_FORMAT_PAR_NONE; | |
402 | ||
403 | uartdata = buf[0] | buf[1]<<8; | |
404 | ||
405 | i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
406 | SET_UART_FORMAT_TYPE, SET_UART_FORMAT, | |
407 | uartdata, 0, NULL, 0, 100); | |
408 | if (i < 0) | |
194343d9 GKH |
409 | dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", |
410 | uartdata, i); | |
fe2baf87 | 411 | dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i); |
619a6f1d GKH |
412 | |
413 | if (cflag & CRTSCTS) { | |
414 | /* enable hardware flow control */ | |
415 | spcp8x5_set_workMode(serial->dev, 0x000a, | |
416 | SET_WORKING_MODE_U2C, priv->type); | |
417 | } | |
619a6f1d GKH |
418 | } |
419 | ||
420 | /* open the serial port. do some usb system call. set termios and get the line | |
fa993ca8 | 421 | * status of the device. */ |
a509a7e4 | 422 | static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) |
619a6f1d GKH |
423 | { |
424 | struct ktermios tmp_termios; | |
425 | struct usb_serial *serial = port->serial; | |
426 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); | |
427 | int ret; | |
428 | unsigned long flags; | |
429 | u8 status = 0x30; | |
430 | /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */ | |
431 | ||
619a6f1d GKH |
432 | usb_clear_halt(serial->dev, port->write_urb->pipe); |
433 | usb_clear_halt(serial->dev, port->read_urb->pipe); | |
434 | ||
435 | ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
436 | 0x09, 0x00, | |
437 | 0x01, 0x00, NULL, 0x00, 100); | |
438 | if (ret) | |
439 | return ret; | |
440 | ||
619a6f1d GKH |
441 | spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type); |
442 | ||
443 | /* Setup termios */ | |
95da310e AC |
444 | if (tty) |
445 | spcp8x5_set_termios(tty, port, &tmp_termios); | |
619a6f1d GKH |
446 | |
447 | spcp8x5_get_msr(serial->dev, &status, priv->type); | |
448 | ||
449 | /* may be we should update uart status here but now we did not do */ | |
450 | spin_lock_irqsave(&priv->lock, flags); | |
451 | priv->line_status = status & 0xf0 ; | |
452 | spin_unlock_irqrestore(&priv->lock, flags); | |
453 | ||
335f8514 | 454 | port->port.drain_delay = 256; |
fa993ca8 JH |
455 | |
456 | return usb_serial_generic_open(tty, port); | |
619a6f1d GKH |
457 | } |
458 | ||
20b9d177 | 459 | static int spcp8x5_tiocmset(struct tty_struct *tty, |
619a6f1d GKH |
460 | unsigned int set, unsigned int clear) |
461 | { | |
95da310e | 462 | struct usb_serial_port *port = tty->driver_data; |
619a6f1d GKH |
463 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); |
464 | unsigned long flags; | |
465 | u8 control; | |
466 | ||
467 | spin_lock_irqsave(&priv->lock, flags); | |
468 | if (set & TIOCM_RTS) | |
469 | priv->line_control |= MCR_RTS; | |
470 | if (set & TIOCM_DTR) | |
471 | priv->line_control |= MCR_DTR; | |
472 | if (clear & TIOCM_RTS) | |
473 | priv->line_control &= ~MCR_RTS; | |
474 | if (clear & TIOCM_DTR) | |
475 | priv->line_control &= ~MCR_DTR; | |
476 | control = priv->line_control; | |
477 | spin_unlock_irqrestore(&priv->lock, flags); | |
478 | ||
479 | return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); | |
480 | } | |
481 | ||
60b33c13 | 482 | static int spcp8x5_tiocmget(struct tty_struct *tty) |
619a6f1d | 483 | { |
95da310e | 484 | struct usb_serial_port *port = tty->driver_data; |
619a6f1d GKH |
485 | struct spcp8x5_private *priv = usb_get_serial_port_data(port); |
486 | unsigned long flags; | |
487 | unsigned int mcr; | |
488 | unsigned int status; | |
489 | unsigned int result; | |
490 | ||
491 | spin_lock_irqsave(&priv->lock, flags); | |
492 | mcr = priv->line_control; | |
493 | status = priv->line_status; | |
494 | spin_unlock_irqrestore(&priv->lock, flags); | |
495 | ||
496 | result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) | |
497 | | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) | |
498 | | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0) | |
499 | | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0) | |
500 | | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0) | |
501 | | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0); | |
502 | ||
503 | return result; | |
504 | } | |
505 | ||
619a6f1d GKH |
506 | /* All of the device info needed for the spcp8x5 SIO serial converter */ |
507 | static struct usb_serial_driver spcp8x5_device = { | |
508 | .driver = { | |
509 | .owner = THIS_MODULE, | |
510 | .name = "SPCP8x5", | |
511 | }, | |
512 | .id_table = id_table, | |
619a6f1d GKH |
513 | .num_ports = 1, |
514 | .open = spcp8x5_open, | |
335f8514 AC |
515 | .dtr_rts = spcp8x5_dtr_rts, |
516 | .carrier_raised = spcp8x5_carrier_raised, | |
619a6f1d | 517 | .set_termios = spcp8x5_set_termios, |
fe1ae7fd | 518 | .init_termios = spcp8x5_init_termios, |
619a6f1d GKH |
519 | .tiocmget = spcp8x5_tiocmget, |
520 | .tiocmset = spcp8x5_tiocmset, | |
bf90ff5f JH |
521 | .port_probe = spcp8x5_port_probe, |
522 | .port_remove = spcp8x5_port_remove, | |
619a6f1d GKH |
523 | }; |
524 | ||
d860322f AS |
525 | static struct usb_serial_driver * const serial_drivers[] = { |
526 | &spcp8x5_device, NULL | |
527 | }; | |
528 | ||
68e24113 | 529 | module_usb_serial_driver(serial_drivers, id_table); |
619a6f1d GKH |
530 | |
531 | MODULE_DESCRIPTION(DRIVER_DESC); | |
619a6f1d | 532 | MODULE_LICENSE("GPL"); |