Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Prolific PL2303 USB to serial adaptor driver | |
3 | * | |
4 | * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) | |
5 | * Copyright (C) 2003 IBM Corp. | |
6 | * | |
7 | * Original driver for 2.2.x by anonymous | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License as published by | |
11 | * the Free Software Foundation; either version 2 of the License, or | |
12 | * (at your option) any later version. | |
13 | * | |
14 | * See Documentation/usb/usb-serial.txt for more information on using this driver | |
15 | * | |
16 | * 2002_Mar_26 gkh | |
17 | * allowed driver to work properly if there is no tty assigned to a port | |
18 | * (this happens for serial console devices.) | |
19 | * | |
20 | * 2001_Oct_06 gkh | |
21 | * Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. | |
22 | * | |
23 | * 2001_Sep_19 gkh | |
24 | * Added break support. | |
25 | * | |
26 | * 2001_Aug_30 gkh | |
27 | * fixed oops in write_bulk_callback. | |
28 | * | |
29 | * 2001_Aug_28 gkh | |
30 | * reworked buffer logic to be like other usb-serial drivers. Hopefully | |
31 | * removing some reported problems. | |
32 | * | |
33 | * 2001_Jun_06 gkh | |
34 | * finished porting to 2.4 format. | |
35 | * | |
36 | */ | |
37 | ||
38 | #include <linux/config.h> | |
39 | #include <linux/kernel.h> | |
40 | #include <linux/errno.h> | |
41 | #include <linux/init.h> | |
42 | #include <linux/slab.h> | |
43 | #include <linux/tty.h> | |
44 | #include <linux/tty_driver.h> | |
45 | #include <linux/tty_flip.h> | |
46 | #include <linux/serial.h> | |
47 | #include <linux/module.h> | |
48 | #include <linux/moduleparam.h> | |
49 | #include <linux/spinlock.h> | |
50 | #include <asm/uaccess.h> | |
51 | #include <linux/usb.h> | |
52 | #include "usb-serial.h" | |
53 | #include "pl2303.h" | |
54 | ||
55 | /* | |
56 | * Version Information | |
57 | */ | |
58 | #define DRIVER_VERSION "v0.12" | |
59 | #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" | |
60 | ||
61 | static int debug; | |
62 | ||
63 | #define PL2303_CLOSING_WAIT (30*HZ) | |
64 | ||
65 | #define PL2303_BUF_SIZE 1024 | |
66 | #define PL2303_TMP_BUF_SIZE 1024 | |
67 | ||
68 | static DECLARE_MUTEX(pl2303_tmp_buf_sem); | |
69 | ||
70 | struct pl2303_buf { | |
71 | unsigned int buf_size; | |
72 | char *buf_buf; | |
73 | char *buf_get; | |
74 | char *buf_put; | |
75 | }; | |
76 | ||
77 | static struct usb_device_id id_table [] = { | |
78 | { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, | |
79 | { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, | |
80 | { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, | |
81 | { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, | |
82 | { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, | |
83 | { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, | |
84 | { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, | |
85 | { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, | |
86 | { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) }, | |
87 | { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) }, | |
88 | { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) }, | |
89 | { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) }, | |
90 | { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) }, | |
91 | { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) }, | |
92 | { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) }, | |
93 | { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) }, | |
94 | { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) }, | |
95 | { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) }, | |
96 | { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) }, | |
acbb36f1 | 97 | { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) }, |
1da177e4 LT |
98 | { } /* Terminating entry */ |
99 | }; | |
100 | ||
101 | MODULE_DEVICE_TABLE (usb, id_table); | |
102 | ||
103 | static struct usb_driver pl2303_driver = { | |
104 | .owner = THIS_MODULE, | |
105 | .name = "pl2303", | |
106 | .probe = usb_serial_probe, | |
107 | .disconnect = usb_serial_disconnect, | |
108 | .id_table = id_table, | |
109 | }; | |
110 | ||
111 | #define SET_LINE_REQUEST_TYPE 0x21 | |
112 | #define SET_LINE_REQUEST 0x20 | |
113 | ||
114 | #define SET_CONTROL_REQUEST_TYPE 0x21 | |
115 | #define SET_CONTROL_REQUEST 0x22 | |
116 | #define CONTROL_DTR 0x01 | |
117 | #define CONTROL_RTS 0x02 | |
118 | ||
119 | #define BREAK_REQUEST_TYPE 0x21 | |
120 | #define BREAK_REQUEST 0x23 | |
121 | #define BREAK_ON 0xffff | |
122 | #define BREAK_OFF 0x0000 | |
123 | ||
124 | #define GET_LINE_REQUEST_TYPE 0xa1 | |
125 | #define GET_LINE_REQUEST 0x21 | |
126 | ||
127 | #define VENDOR_WRITE_REQUEST_TYPE 0x40 | |
128 | #define VENDOR_WRITE_REQUEST 0x01 | |
129 | ||
130 | #define VENDOR_READ_REQUEST_TYPE 0xc0 | |
131 | #define VENDOR_READ_REQUEST 0x01 | |
132 | ||
133 | #define UART_STATE 0x08 | |
134 | #define UART_STATE_TRANSIENT_MASK 0x74 | |
135 | #define UART_DCD 0x01 | |
136 | #define UART_DSR 0x02 | |
137 | #define UART_BREAK_ERROR 0x04 | |
138 | #define UART_RING 0x08 | |
139 | #define UART_FRAME_ERROR 0x10 | |
140 | #define UART_PARITY_ERROR 0x20 | |
141 | #define UART_OVERRUN_ERROR 0x40 | |
142 | #define UART_CTS 0x80 | |
143 | ||
144 | /* function prototypes for a PL2303 serial converter */ | |
145 | static int pl2303_open (struct usb_serial_port *port, struct file *filp); | |
146 | static void pl2303_close (struct usb_serial_port *port, struct file *filp); | |
147 | static void pl2303_set_termios (struct usb_serial_port *port, | |
148 | struct termios *old); | |
149 | static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, | |
150 | unsigned int cmd, unsigned long arg); | |
151 | static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs); | |
152 | static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs); | |
153 | static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs); | |
154 | static int pl2303_write (struct usb_serial_port *port, | |
155 | const unsigned char *buf, int count); | |
156 | static void pl2303_send (struct usb_serial_port *port); | |
157 | static int pl2303_write_room(struct usb_serial_port *port); | |
158 | static int pl2303_chars_in_buffer(struct usb_serial_port *port); | |
159 | static void pl2303_break_ctl(struct usb_serial_port *port,int break_state); | |
160 | static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file); | |
161 | static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, | |
162 | unsigned int set, unsigned int clear); | |
163 | static int pl2303_startup (struct usb_serial *serial); | |
164 | static void pl2303_shutdown (struct usb_serial *serial); | |
165 | static struct pl2303_buf *pl2303_buf_alloc(unsigned int size); | |
166 | static void pl2303_buf_free(struct pl2303_buf *pb); | |
167 | static void pl2303_buf_clear(struct pl2303_buf *pb); | |
168 | static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb); | |
169 | static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb); | |
170 | static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, | |
171 | unsigned int count); | |
172 | static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, | |
173 | unsigned int count); | |
174 | ||
175 | ||
176 | /* All of the device info needed for the PL2303 SIO serial converter */ | |
177 | static struct usb_serial_device_type pl2303_device = { | |
178 | .owner = THIS_MODULE, | |
179 | .name = "PL-2303", | |
180 | .id_table = id_table, | |
181 | .num_interrupt_in = NUM_DONT_CARE, | |
182 | .num_bulk_in = 1, | |
183 | .num_bulk_out = 1, | |
184 | .num_ports = 1, | |
185 | .open = pl2303_open, | |
186 | .close = pl2303_close, | |
187 | .write = pl2303_write, | |
188 | .ioctl = pl2303_ioctl, | |
189 | .break_ctl = pl2303_break_ctl, | |
190 | .set_termios = pl2303_set_termios, | |
191 | .tiocmget = pl2303_tiocmget, | |
192 | .tiocmset = pl2303_tiocmset, | |
193 | .read_bulk_callback = pl2303_read_bulk_callback, | |
194 | .read_int_callback = pl2303_read_int_callback, | |
195 | .write_bulk_callback = pl2303_write_bulk_callback, | |
196 | .write_room = pl2303_write_room, | |
197 | .chars_in_buffer = pl2303_chars_in_buffer, | |
198 | .attach = pl2303_startup, | |
199 | .shutdown = pl2303_shutdown, | |
200 | }; | |
201 | ||
202 | enum pl2303_type { | |
203 | type_0, /* don't know the difference between type 0 and */ | |
204 | type_1, /* type 1, until someone from prolific tells us... */ | |
205 | HX, /* HX version of the pl2303 chip */ | |
206 | }; | |
207 | ||
208 | struct pl2303_private { | |
209 | spinlock_t lock; | |
210 | struct pl2303_buf *buf; | |
211 | int write_urb_in_use; | |
212 | wait_queue_head_t delta_msr_wait; | |
213 | u8 line_control; | |
214 | u8 line_status; | |
215 | u8 termios_initialized; | |
216 | enum pl2303_type type; | |
217 | }; | |
218 | ||
219 | ||
220 | static int pl2303_startup (struct usb_serial *serial) | |
221 | { | |
222 | struct pl2303_private *priv; | |
223 | enum pl2303_type type = type_0; | |
224 | int i; | |
225 | ||
226 | if (serial->dev->descriptor.bDeviceClass == 0x02) | |
227 | type = type_0; | |
228 | else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) | |
229 | type = HX; | |
230 | else if (serial->dev->descriptor.bDeviceClass == 0x00) | |
231 | type = type_1; | |
232 | else if (serial->dev->descriptor.bDeviceClass == 0xFF) | |
233 | type = type_1; | |
234 | dbg("device type: %d", type); | |
235 | ||
236 | for (i = 0; i < serial->num_ports; ++i) { | |
237 | priv = kmalloc (sizeof (struct pl2303_private), GFP_KERNEL); | |
238 | if (!priv) | |
239 | goto cleanup; | |
240 | memset (priv, 0x00, sizeof (struct pl2303_private)); | |
241 | spin_lock_init(&priv->lock); | |
242 | priv->buf = pl2303_buf_alloc(PL2303_BUF_SIZE); | |
243 | if (priv->buf == NULL) { | |
244 | kfree(priv); | |
245 | goto cleanup; | |
246 | } | |
247 | init_waitqueue_head(&priv->delta_msr_wait); | |
248 | priv->type = type; | |
249 | usb_set_serial_port_data(serial->port[i], priv); | |
250 | } | |
251 | return 0; | |
252 | ||
253 | cleanup: | |
254 | for (--i; i>=0; --i) { | |
255 | priv = usb_get_serial_port_data(serial->port[i]); | |
256 | pl2303_buf_free(priv->buf); | |
257 | kfree(priv); | |
258 | usb_set_serial_port_data(serial->port[i], NULL); | |
259 | } | |
260 | return -ENOMEM; | |
261 | } | |
262 | ||
263 | static int set_control_lines (struct usb_device *dev, u8 value) | |
264 | { | |
265 | int retval; | |
266 | ||
267 | retval = usb_control_msg (dev, usb_sndctrlpipe (dev, 0), | |
268 | SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, | |
269 | value, 0, NULL, 0, 100); | |
270 | dbg("%s - value = %d, retval = %d", __FUNCTION__, value, retval); | |
271 | return retval; | |
272 | } | |
273 | ||
274 | static int pl2303_write (struct usb_serial_port *port, const unsigned char *buf, int count) | |
275 | { | |
276 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
277 | unsigned long flags; | |
278 | ||
279 | dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count); | |
280 | ||
281 | if (!count) | |
282 | return count; | |
283 | ||
284 | spin_lock_irqsave(&priv->lock, flags); | |
285 | count = pl2303_buf_put(priv->buf, buf, count); | |
286 | spin_unlock_irqrestore(&priv->lock, flags); | |
287 | ||
288 | pl2303_send(port); | |
289 | ||
290 | return count; | |
291 | } | |
292 | ||
293 | static void pl2303_send(struct usb_serial_port *port) | |
294 | { | |
295 | int count, result; | |
296 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
297 | unsigned long flags; | |
298 | ||
299 | dbg("%s - port %d", __FUNCTION__, port->number); | |
300 | ||
301 | spin_lock_irqsave(&priv->lock, flags); | |
302 | ||
303 | if (priv->write_urb_in_use) { | |
304 | spin_unlock_irqrestore(&priv->lock, flags); | |
305 | return; | |
306 | } | |
307 | ||
308 | count = pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer, | |
309 | port->bulk_out_size); | |
310 | ||
311 | if (count == 0) { | |
312 | spin_unlock_irqrestore(&priv->lock, flags); | |
313 | return; | |
314 | } | |
315 | ||
316 | priv->write_urb_in_use = 1; | |
317 | ||
318 | spin_unlock_irqrestore(&priv->lock, flags); | |
319 | ||
320 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer); | |
321 | ||
322 | port->write_urb->transfer_buffer_length = count; | |
323 | port->write_urb->dev = port->serial->dev; | |
324 | result = usb_submit_urb (port->write_urb, GFP_ATOMIC); | |
325 | if (result) { | |
326 | dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result); | |
327 | priv->write_urb_in_use = 0; | |
328 | // TODO: reschedule pl2303_send | |
329 | } | |
330 | ||
331 | schedule_work(&port->work); | |
332 | } | |
333 | ||
334 | static int pl2303_write_room(struct usb_serial_port *port) | |
335 | { | |
336 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
337 | int room = 0; | |
338 | unsigned long flags; | |
339 | ||
340 | dbg("%s - port %d", __FUNCTION__, port->number); | |
341 | ||
342 | spin_lock_irqsave(&priv->lock, flags); | |
343 | room = pl2303_buf_space_avail(priv->buf); | |
344 | spin_unlock_irqrestore(&priv->lock, flags); | |
345 | ||
346 | dbg("%s - returns %d", __FUNCTION__, room); | |
347 | return room; | |
348 | } | |
349 | ||
350 | static int pl2303_chars_in_buffer(struct usb_serial_port *port) | |
351 | { | |
352 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
353 | int chars = 0; | |
354 | unsigned long flags; | |
355 | ||
356 | dbg("%s - port %d", __FUNCTION__, port->number); | |
357 | ||
358 | spin_lock_irqsave(&priv->lock, flags); | |
359 | chars = pl2303_buf_data_avail(priv->buf); | |
360 | spin_unlock_irqrestore(&priv->lock, flags); | |
361 | ||
362 | dbg("%s - returns %d", __FUNCTION__, chars); | |
363 | return chars; | |
364 | } | |
365 | ||
366 | static void pl2303_set_termios (struct usb_serial_port *port, struct termios *old_termios) | |
367 | { | |
368 | struct usb_serial *serial = port->serial; | |
369 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
370 | unsigned long flags; | |
371 | unsigned int cflag; | |
372 | unsigned char *buf; | |
373 | int baud; | |
374 | int i; | |
375 | u8 control; | |
376 | ||
377 | dbg("%s - port %d", __FUNCTION__, port->number); | |
378 | ||
379 | if ((!port->tty) || (!port->tty->termios)) { | |
380 | dbg("%s - no tty structures", __FUNCTION__); | |
381 | return; | |
382 | } | |
383 | ||
384 | spin_lock_irqsave(&priv->lock, flags); | |
385 | if (!priv->termios_initialized) { | |
386 | *(port->tty->termios) = tty_std_termios; | |
387 | port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; | |
388 | priv->termios_initialized = 1; | |
389 | } | |
390 | spin_unlock_irqrestore(&priv->lock, flags); | |
391 | ||
392 | cflag = port->tty->termios->c_cflag; | |
393 | /* check that they really want us to change something */ | |
394 | if (old_termios) { | |
395 | if ((cflag == old_termios->c_cflag) && | |
396 | (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) { | |
397 | dbg("%s - nothing to change...", __FUNCTION__); | |
398 | return; | |
399 | } | |
400 | } | |
401 | ||
402 | buf = kmalloc (7, GFP_KERNEL); | |
403 | if (!buf) { | |
404 | dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__); | |
405 | return; | |
406 | } | |
407 | memset (buf, 0x00, 0x07); | |
408 | ||
409 | i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0), | |
410 | GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, | |
411 | 0, 0, buf, 7, 100); | |
412 | dbg ("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, | |
413 | buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); | |
414 | ||
415 | ||
416 | if (cflag & CSIZE) { | |
417 | switch (cflag & CSIZE) { | |
418 | case CS5: buf[6] = 5; break; | |
419 | case CS6: buf[6] = 6; break; | |
420 | case CS7: buf[6] = 7; break; | |
421 | default: | |
422 | case CS8: buf[6] = 8; break; | |
423 | } | |
424 | dbg("%s - data bits = %d", __FUNCTION__, buf[6]); | |
425 | } | |
426 | ||
427 | baud = 0; | |
428 | switch (cflag & CBAUD) { | |
429 | case B0: baud = 0; break; | |
430 | case B75: baud = 75; break; | |
431 | case B150: baud = 150; break; | |
432 | case B300: baud = 300; break; | |
433 | case B600: baud = 600; break; | |
434 | case B1200: baud = 1200; break; | |
435 | case B1800: baud = 1800; break; | |
436 | case B2400: baud = 2400; break; | |
437 | case B4800: baud = 4800; break; | |
438 | case B9600: baud = 9600; break; | |
439 | case B19200: baud = 19200; break; | |
440 | case B38400: baud = 38400; break; | |
441 | case B57600: baud = 57600; break; | |
442 | case B115200: baud = 115200; break; | |
443 | case B230400: baud = 230400; break; | |
444 | case B460800: baud = 460800; break; | |
445 | default: | |
446 | dev_err(&port->dev, "pl2303 driver does not support the baudrate requested (fix it)\n"); | |
447 | break; | |
448 | } | |
449 | dbg("%s - baud = %d", __FUNCTION__, baud); | |
450 | if (baud) { | |
451 | buf[0] = baud & 0xff; | |
452 | buf[1] = (baud >> 8) & 0xff; | |
453 | buf[2] = (baud >> 16) & 0xff; | |
454 | buf[3] = (baud >> 24) & 0xff; | |
455 | } | |
456 | ||
457 | /* For reference buf[4]=0 is 1 stop bits */ | |
458 | /* For reference buf[4]=1 is 1.5 stop bits */ | |
459 | /* For reference buf[4]=2 is 2 stop bits */ | |
460 | if (cflag & CSTOPB) { | |
461 | buf[4] = 2; | |
462 | dbg("%s - stop bits = 2", __FUNCTION__); | |
463 | } else { | |
464 | buf[4] = 0; | |
465 | dbg("%s - stop bits = 1", __FUNCTION__); | |
466 | } | |
467 | ||
468 | if (cflag & PARENB) { | |
469 | /* For reference buf[5]=0 is none parity */ | |
470 | /* For reference buf[5]=1 is odd parity */ | |
471 | /* For reference buf[5]=2 is even parity */ | |
472 | /* For reference buf[5]=3 is mark parity */ | |
473 | /* For reference buf[5]=4 is space parity */ | |
474 | if (cflag & PARODD) { | |
475 | buf[5] = 1; | |
476 | dbg("%s - parity = odd", __FUNCTION__); | |
477 | } else { | |
478 | buf[5] = 2; | |
479 | dbg("%s - parity = even", __FUNCTION__); | |
480 | } | |
481 | } else { | |
482 | buf[5] = 0; | |
483 | dbg("%s - parity = none", __FUNCTION__); | |
484 | } | |
485 | ||
486 | i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0), | |
487 | SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE, | |
488 | 0, 0, buf, 7, 100); | |
489 | dbg ("0x21:0x20:0:0 %d", i); | |
490 | ||
491 | /* change control lines if we are switching to or from B0 */ | |
492 | spin_lock_irqsave(&priv->lock, flags); | |
493 | control = priv->line_control; | |
494 | if ((cflag & CBAUD) == B0) | |
495 | priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); | |
496 | else | |
497 | priv->line_control |= (CONTROL_DTR | CONTROL_RTS); | |
498 | if (control != priv->line_control) { | |
499 | control = priv->line_control; | |
500 | spin_unlock_irqrestore(&priv->lock, flags); | |
501 | set_control_lines(serial->dev, control); | |
502 | } else { | |
503 | spin_unlock_irqrestore(&priv->lock, flags); | |
504 | } | |
505 | ||
506 | buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0; | |
507 | ||
508 | i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0), | |
509 | GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, | |
510 | 0, 0, buf, 7, 100); | |
511 | dbg ("0xa1:0x21:0:0 %d - %x %x %x %x %x %x %x", i, | |
512 | buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); | |
513 | ||
514 | if (cflag & CRTSCTS) { | |
515 | __u16 index; | |
516 | if (priv->type == HX) | |
517 | index = 0x61; | |
518 | else | |
519 | index = 0x41; | |
520 | i = usb_control_msg(serial->dev, | |
521 | usb_sndctrlpipe(serial->dev, 0), | |
522 | VENDOR_WRITE_REQUEST, | |
523 | VENDOR_WRITE_REQUEST_TYPE, | |
524 | 0x0, index, NULL, 0, 100); | |
525 | dbg ("0x40:0x1:0x0:0x%x %d", index, i); | |
526 | } | |
527 | ||
528 | kfree (buf); | |
529 | } | |
530 | ||
531 | static int pl2303_open (struct usb_serial_port *port, struct file *filp) | |
532 | { | |
533 | struct termios tmp_termios; | |
534 | struct usb_serial *serial = port->serial; | |
535 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
536 | unsigned char *buf; | |
537 | int result; | |
538 | ||
539 | dbg("%s - port %d", __FUNCTION__, port->number); | |
540 | ||
541 | usb_clear_halt(serial->dev, port->write_urb->pipe); | |
542 | usb_clear_halt(serial->dev, port->read_urb->pipe); | |
543 | ||
544 | buf = kmalloc(10, GFP_KERNEL); | |
545 | if (buf==NULL) | |
546 | return -ENOMEM; | |
547 | ||
548 | #define FISH(a,b,c,d) \ | |
549 | result=usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev,0), \ | |
550 | b, a, c, d, buf, 1, 100); \ | |
551 | dbg("0x%x:0x%x:0x%x:0x%x %d - %x",a,b,c,d,result,buf[0]); | |
552 | ||
553 | #define SOUP(a,b,c,d) \ | |
554 | result=usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev,0), \ | |
555 | b, a, c, d, NULL, 0, 100); \ | |
556 | dbg("0x%x:0x%x:0x%x:0x%x %d",a,b,c,d,result); | |
557 | ||
558 | FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0); | |
559 | SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 0); | |
560 | FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0); | |
561 | FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0); | |
562 | FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0); | |
563 | SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 1); | |
564 | FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0); | |
565 | FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0); | |
566 | SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0, 1); | |
567 | SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 1, 0); | |
568 | ||
569 | if (priv->type == HX) { | |
570 | /* HX chip */ | |
571 | SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x44); | |
572 | /* reset upstream data pipes */ | |
573 | SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 8, 0); | |
574 | SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 9, 0); | |
575 | } else { | |
576 | SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x24); | |
577 | } | |
578 | ||
579 | kfree(buf); | |
580 | ||
581 | /* Setup termios */ | |
582 | if (port->tty) { | |
583 | pl2303_set_termios (port, &tmp_termios); | |
584 | } | |
585 | ||
586 | //FIXME: need to assert RTS and DTR if CRTSCTS off | |
587 | ||
588 | dbg("%s - submitting read urb", __FUNCTION__); | |
589 | port->read_urb->dev = serial->dev; | |
590 | result = usb_submit_urb (port->read_urb, GFP_KERNEL); | |
591 | if (result) { | |
592 | dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result); | |
593 | pl2303_close (port, NULL); | |
594 | return -EPROTO; | |
595 | } | |
596 | ||
597 | dbg("%s - submitting interrupt urb", __FUNCTION__); | |
598 | port->interrupt_in_urb->dev = serial->dev; | |
599 | result = usb_submit_urb (port->interrupt_in_urb, GFP_KERNEL); | |
600 | if (result) { | |
601 | dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n", __FUNCTION__, result); | |
602 | pl2303_close (port, NULL); | |
603 | return -EPROTO; | |
604 | } | |
605 | return 0; | |
606 | } | |
607 | ||
608 | ||
609 | static void pl2303_close (struct usb_serial_port *port, struct file *filp) | |
610 | { | |
611 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
612 | unsigned long flags; | |
613 | unsigned int c_cflag; | |
614 | int bps; | |
615 | long timeout; | |
616 | wait_queue_t wait; \ | |
617 | ||
618 | dbg("%s - port %d", __FUNCTION__, port->number); | |
619 | ||
620 | /* wait for data to drain from the buffer */ | |
621 | spin_lock_irqsave(&priv->lock, flags); | |
622 | timeout = PL2303_CLOSING_WAIT; | |
623 | init_waitqueue_entry(&wait, current); | |
624 | add_wait_queue(&port->tty->write_wait, &wait); | |
625 | for (;;) { | |
626 | set_current_state(TASK_INTERRUPTIBLE); | |
627 | if (pl2303_buf_data_avail(priv->buf) == 0 | |
628 | || timeout == 0 || signal_pending(current) | |
629 | || !usb_get_intfdata(port->serial->interface)) /* disconnect */ | |
630 | break; | |
631 | spin_unlock_irqrestore(&priv->lock, flags); | |
632 | timeout = schedule_timeout(timeout); | |
633 | spin_lock_irqsave(&priv->lock, flags); | |
634 | } | |
635 | set_current_state(TASK_RUNNING); | |
636 | remove_wait_queue(&port->tty->write_wait, &wait); | |
637 | /* clear out any remaining data in the buffer */ | |
638 | pl2303_buf_clear(priv->buf); | |
639 | spin_unlock_irqrestore(&priv->lock, flags); | |
640 | ||
641 | /* wait for characters to drain from the device */ | |
642 | /* (this is long enough for the entire 256 byte */ | |
643 | /* pl2303 hardware buffer to drain with no flow */ | |
644 | /* control for data rates of 1200 bps or more, */ | |
645 | /* for lower rates we should really know how much */ | |
646 | /* data is in the buffer to compute a delay */ | |
647 | /* that is not unnecessarily long) */ | |
648 | bps = tty_get_baud_rate(port->tty); | |
649 | if (bps > 1200) | |
650 | timeout = max((HZ*2560)/bps,HZ/10); | |
651 | else | |
652 | timeout = 2*HZ; | |
653 | set_current_state(TASK_INTERRUPTIBLE); | |
654 | schedule_timeout(timeout); | |
655 | ||
656 | /* shutdown our urbs */ | |
657 | dbg("%s - shutting down urbs", __FUNCTION__); | |
658 | usb_kill_urb(port->write_urb); | |
659 | usb_kill_urb(port->read_urb); | |
660 | usb_kill_urb(port->interrupt_in_urb); | |
661 | ||
662 | if (port->tty) { | |
663 | c_cflag = port->tty->termios->c_cflag; | |
664 | if (c_cflag & HUPCL) { | |
665 | /* drop DTR and RTS */ | |
666 | spin_lock_irqsave(&priv->lock, flags); | |
667 | priv->line_control = 0; | |
668 | spin_unlock_irqrestore (&priv->lock, flags); | |
669 | set_control_lines (port->serial->dev, 0); | |
670 | } | |
671 | } | |
672 | } | |
673 | ||
674 | static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file, | |
675 | unsigned int set, unsigned int clear) | |
676 | { | |
677 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
678 | unsigned long flags; | |
679 | u8 control; | |
680 | ||
6fdd8e8e FL |
681 | if (!usb_get_intfdata(port->serial->interface)) |
682 | return -ENODEV; | |
683 | ||
1da177e4 LT |
684 | spin_lock_irqsave (&priv->lock, flags); |
685 | if (set & TIOCM_RTS) | |
686 | priv->line_control |= CONTROL_RTS; | |
687 | if (set & TIOCM_DTR) | |
688 | priv->line_control |= CONTROL_DTR; | |
689 | if (clear & TIOCM_RTS) | |
690 | priv->line_control &= ~CONTROL_RTS; | |
691 | if (clear & TIOCM_DTR) | |
692 | priv->line_control &= ~CONTROL_DTR; | |
693 | control = priv->line_control; | |
694 | spin_unlock_irqrestore (&priv->lock, flags); | |
695 | ||
696 | return set_control_lines (port->serial->dev, control); | |
697 | } | |
698 | ||
699 | static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file) | |
700 | { | |
701 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
702 | unsigned long flags; | |
703 | unsigned int mcr; | |
704 | unsigned int status; | |
705 | unsigned int result; | |
706 | ||
707 | dbg("%s (%d)", __FUNCTION__, port->number); | |
708 | ||
6fdd8e8e FL |
709 | if (!usb_get_intfdata(port->serial->interface)) |
710 | return -ENODEV; | |
711 | ||
1da177e4 LT |
712 | spin_lock_irqsave (&priv->lock, flags); |
713 | mcr = priv->line_control; | |
714 | status = priv->line_status; | |
715 | spin_unlock_irqrestore (&priv->lock, flags); | |
716 | ||
717 | result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0) | |
718 | | ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0) | |
719 | | ((status & UART_CTS) ? TIOCM_CTS : 0) | |
720 | | ((status & UART_DSR) ? TIOCM_DSR : 0) | |
721 | | ((status & UART_RING) ? TIOCM_RI : 0) | |
722 | | ((status & UART_DCD) ? TIOCM_CD : 0); | |
723 | ||
724 | dbg("%s - result = %x", __FUNCTION__, result); | |
725 | ||
726 | return result; | |
727 | } | |
728 | ||
729 | static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) | |
730 | { | |
731 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
732 | unsigned long flags; | |
733 | unsigned int prevstatus; | |
734 | unsigned int status; | |
735 | unsigned int changed; | |
736 | ||
737 | spin_lock_irqsave (&priv->lock, flags); | |
738 | prevstatus = priv->line_status; | |
739 | spin_unlock_irqrestore (&priv->lock, flags); | |
740 | ||
741 | while (1) { | |
742 | interruptible_sleep_on(&priv->delta_msr_wait); | |
743 | /* see if a signal did it */ | |
744 | if (signal_pending(current)) | |
745 | return -ERESTARTSYS; | |
746 | ||
747 | spin_lock_irqsave (&priv->lock, flags); | |
748 | status = priv->line_status; | |
749 | spin_unlock_irqrestore (&priv->lock, flags); | |
750 | ||
751 | changed=prevstatus^status; | |
752 | ||
753 | if (((arg & TIOCM_RNG) && (changed & UART_RING)) || | |
754 | ((arg & TIOCM_DSR) && (changed & UART_DSR)) || | |
755 | ((arg & TIOCM_CD) && (changed & UART_DCD)) || | |
756 | ((arg & TIOCM_CTS) && (changed & UART_CTS)) ) { | |
757 | return 0; | |
758 | } | |
759 | prevstatus = status; | |
760 | } | |
761 | /* NOTREACHED */ | |
762 | return 0; | |
763 | } | |
764 | ||
765 | static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg) | |
766 | { | |
767 | dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd); | |
768 | ||
769 | switch (cmd) { | |
770 | case TIOCMIWAIT: | |
771 | dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number); | |
772 | return wait_modem_info(port, arg); | |
773 | ||
774 | default: | |
775 | dbg("%s not supported = 0x%04x", __FUNCTION__, cmd); | |
776 | break; | |
777 | } | |
778 | ||
779 | return -ENOIOCTLCMD; | |
780 | } | |
781 | ||
782 | static void pl2303_break_ctl (struct usb_serial_port *port, int break_state) | |
783 | { | |
784 | struct usb_serial *serial = port->serial; | |
785 | u16 state; | |
786 | int result; | |
787 | ||
788 | dbg("%s - port %d", __FUNCTION__, port->number); | |
789 | ||
790 | if (break_state == 0) | |
791 | state = BREAK_OFF; | |
792 | else | |
793 | state = BREAK_ON; | |
794 | dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on"); | |
795 | ||
796 | result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0), | |
797 | BREAK_REQUEST, BREAK_REQUEST_TYPE, state, | |
798 | 0, NULL, 0, 100); | |
799 | if (result) | |
800 | dbg("%s - error sending break = %d", __FUNCTION__, result); | |
801 | } | |
802 | ||
803 | ||
804 | static void pl2303_shutdown (struct usb_serial *serial) | |
805 | { | |
806 | int i; | |
807 | struct pl2303_private *priv; | |
808 | ||
809 | dbg("%s", __FUNCTION__); | |
810 | ||
811 | for (i = 0; i < serial->num_ports; ++i) { | |
812 | priv = usb_get_serial_port_data(serial->port[i]); | |
813 | if (priv) { | |
814 | pl2303_buf_free(priv->buf); | |
815 | kfree(priv); | |
816 | usb_set_serial_port_data(serial->port[i], NULL); | |
817 | } | |
818 | } | |
819 | } | |
820 | ||
97bb13ec FL |
821 | static void pl2303_update_line_status(struct usb_serial_port *port, |
822 | unsigned char *data, | |
823 | unsigned int actual_length) | |
824 | { | |
825 | ||
826 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
827 | unsigned long flags; | |
828 | u8 status_idx = UART_STATE; | |
829 | u8 length = UART_STATE; | |
830 | ||
831 | if ((le16_to_cpu(port->serial->dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && | |
832 | (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65)) { | |
833 | length = 1; | |
834 | status_idx = 0; | |
835 | } | |
836 | ||
837 | if (actual_length < length) | |
838 | goto exit; | |
839 | ||
840 | /* Save off the uart status for others to look at */ | |
841 | spin_lock_irqsave(&priv->lock, flags); | |
842 | priv->line_status = data[status_idx]; | |
843 | spin_unlock_irqrestore(&priv->lock, flags); | |
844 | ||
845 | exit: | |
846 | return; | |
847 | } | |
1da177e4 LT |
848 | |
849 | static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs) | |
850 | { | |
851 | struct usb_serial_port *port = (struct usb_serial_port *) urb->context; | |
1da177e4 | 852 | unsigned char *data = urb->transfer_buffer; |
97bb13ec | 853 | unsigned int actual_length = urb->actual_length; |
1da177e4 | 854 | int status; |
1da177e4 LT |
855 | |
856 | dbg("%s (%d)", __FUNCTION__, port->number); | |
857 | ||
858 | switch (urb->status) { | |
859 | case 0: | |
860 | /* success */ | |
861 | break; | |
862 | case -ECONNRESET: | |
863 | case -ENOENT: | |
864 | case -ESHUTDOWN: | |
865 | /* this urb is terminated, clean up */ | |
866 | dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); | |
867 | return; | |
868 | default: | |
869 | dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); | |
870 | goto exit; | |
871 | } | |
872 | ||
1da177e4 | 873 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, urb->transfer_buffer); |
97bb13ec | 874 | pl2303_update_line_status(port, data, actual_length); |
1da177e4 | 875 | |
1da177e4 LT |
876 | exit: |
877 | status = usb_submit_urb (urb, GFP_ATOMIC); | |
878 | if (status) | |
879 | dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n", | |
880 | __FUNCTION__, status); | |
881 | } | |
882 | ||
883 | ||
884 | static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs) | |
885 | { | |
886 | struct usb_serial_port *port = (struct usb_serial_port *) urb->context; | |
887 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
888 | struct tty_struct *tty; | |
889 | unsigned char *data = urb->transfer_buffer; | |
890 | unsigned long flags; | |
891 | int i; | |
892 | int result; | |
893 | u8 status; | |
894 | char tty_flag; | |
895 | ||
896 | dbg("%s - port %d", __FUNCTION__, port->number); | |
897 | ||
898 | if (urb->status) { | |
899 | dbg("%s - urb->status = %d", __FUNCTION__, urb->status); | |
900 | if (!port->open_count) { | |
901 | dbg("%s - port is closed, exiting.", __FUNCTION__); | |
902 | return; | |
903 | } | |
904 | if (urb->status == -EPROTO) { | |
905 | /* PL2303 mysteriously fails with -EPROTO reschedule the read */ | |
906 | dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__); | |
907 | urb->status = 0; | |
908 | urb->dev = port->serial->dev; | |
909 | result = usb_submit_urb(urb, GFP_ATOMIC); | |
910 | if (result) | |
911 | dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); | |
912 | return; | |
913 | } | |
914 | dbg("%s - unable to handle the error, exiting.", __FUNCTION__); | |
915 | return; | |
916 | } | |
917 | ||
918 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); | |
919 | ||
920 | /* get tty_flag from status */ | |
921 | tty_flag = TTY_NORMAL; | |
922 | ||
923 | spin_lock_irqsave(&priv->lock, flags); | |
924 | status = priv->line_status; | |
925 | priv->line_status &= ~UART_STATE_TRANSIENT_MASK; | |
926 | spin_unlock_irqrestore(&priv->lock, flags); | |
927 | wake_up_interruptible (&priv->delta_msr_wait); | |
928 | ||
929 | /* break takes precedence over parity, */ | |
930 | /* which takes precedence over framing errors */ | |
931 | if (status & UART_BREAK_ERROR ) | |
932 | tty_flag = TTY_BREAK; | |
933 | else if (status & UART_PARITY_ERROR) | |
934 | tty_flag = TTY_PARITY; | |
935 | else if (status & UART_FRAME_ERROR) | |
936 | tty_flag = TTY_FRAME; | |
937 | dbg("%s - tty_flag = %d", __FUNCTION__, tty_flag); | |
938 | ||
939 | tty = port->tty; | |
940 | if (tty && urb->actual_length) { | |
941 | /* overrun is special, not associated with a char */ | |
942 | if (status & UART_OVERRUN_ERROR) | |
943 | tty_insert_flip_char(tty, 0, TTY_OVERRUN); | |
944 | ||
945 | for (i = 0; i < urb->actual_length; ++i) { | |
946 | if (tty->flip.count >= TTY_FLIPBUF_SIZE) { | |
947 | tty_flip_buffer_push(tty); | |
948 | } | |
949 | tty_insert_flip_char (tty, data[i], tty_flag); | |
950 | } | |
951 | tty_flip_buffer_push (tty); | |
952 | } | |
953 | ||
954 | /* Schedule the next read _if_ we are still open */ | |
955 | if (port->open_count) { | |
956 | urb->dev = port->serial->dev; | |
957 | result = usb_submit_urb(urb, GFP_ATOMIC); | |
958 | if (result) | |
959 | dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); | |
960 | } | |
961 | ||
962 | return; | |
963 | } | |
964 | ||
965 | ||
966 | ||
967 | static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs) | |
968 | { | |
969 | struct usb_serial_port *port = (struct usb_serial_port *) urb->context; | |
970 | struct pl2303_private *priv = usb_get_serial_port_data(port); | |
971 | int result; | |
972 | ||
973 | dbg("%s - port %d", __FUNCTION__, port->number); | |
974 | ||
975 | switch (urb->status) { | |
976 | case 0: | |
977 | /* success */ | |
978 | break; | |
979 | case -ECONNRESET: | |
980 | case -ENOENT: | |
981 | case -ESHUTDOWN: | |
982 | /* this urb is terminated, clean up */ | |
983 | dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); | |
984 | priv->write_urb_in_use = 0; | |
985 | return; | |
986 | default: | |
987 | /* error in the urb, so we have to resubmit it */ | |
988 | dbg("%s - Overflow in write", __FUNCTION__); | |
989 | dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status); | |
990 | port->write_urb->transfer_buffer_length = 1; | |
991 | port->write_urb->dev = port->serial->dev; | |
992 | result = usb_submit_urb (port->write_urb, GFP_ATOMIC); | |
993 | if (result) | |
994 | dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", __FUNCTION__, result); | |
995 | else | |
996 | return; | |
997 | } | |
998 | ||
999 | priv->write_urb_in_use = 0; | |
1000 | ||
1001 | /* send any buffered data */ | |
1002 | pl2303_send(port); | |
1003 | } | |
1004 | ||
1005 | ||
1006 | /* | |
1007 | * pl2303_buf_alloc | |
1008 | * | |
1009 | * Allocate a circular buffer and all associated memory. | |
1010 | */ | |
1011 | ||
1012 | static struct pl2303_buf *pl2303_buf_alloc(unsigned int size) | |
1013 | { | |
1014 | ||
1015 | struct pl2303_buf *pb; | |
1016 | ||
1017 | ||
1018 | if (size == 0) | |
1019 | return NULL; | |
1020 | ||
1021 | pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL); | |
1022 | if (pb == NULL) | |
1023 | return NULL; | |
1024 | ||
1025 | pb->buf_buf = kmalloc(size, GFP_KERNEL); | |
1026 | if (pb->buf_buf == NULL) { | |
1027 | kfree(pb); | |
1028 | return NULL; | |
1029 | } | |
1030 | ||
1031 | pb->buf_size = size; | |
1032 | pb->buf_get = pb->buf_put = pb->buf_buf; | |
1033 | ||
1034 | return pb; | |
1035 | ||
1036 | } | |
1037 | ||
1038 | ||
1039 | /* | |
1040 | * pl2303_buf_free | |
1041 | * | |
1042 | * Free the buffer and all associated memory. | |
1043 | */ | |
1044 | ||
1045 | static void pl2303_buf_free(struct pl2303_buf *pb) | |
1046 | { | |
1bc3c9e1 JJ |
1047 | if (pb) { |
1048 | kfree(pb->buf_buf); | |
1da177e4 LT |
1049 | kfree(pb); |
1050 | } | |
1051 | } | |
1052 | ||
1053 | ||
1054 | /* | |
1055 | * pl2303_buf_clear | |
1056 | * | |
1057 | * Clear out all data in the circular buffer. | |
1058 | */ | |
1059 | ||
1060 | static void pl2303_buf_clear(struct pl2303_buf *pb) | |
1061 | { | |
1062 | if (pb != NULL) | |
1063 | pb->buf_get = pb->buf_put; | |
1064 | /* equivalent to a get of all data available */ | |
1065 | } | |
1066 | ||
1067 | ||
1068 | /* | |
1069 | * pl2303_buf_data_avail | |
1070 | * | |
1071 | * Return the number of bytes of data available in the circular | |
1072 | * buffer. | |
1073 | */ | |
1074 | ||
1075 | static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb) | |
1076 | { | |
1077 | if (pb != NULL) | |
1078 | return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); | |
1079 | else | |
1080 | return 0; | |
1081 | } | |
1082 | ||
1083 | ||
1084 | /* | |
1085 | * pl2303_buf_space_avail | |
1086 | * | |
1087 | * Return the number of bytes of space available in the circular | |
1088 | * buffer. | |
1089 | */ | |
1090 | ||
1091 | static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb) | |
1092 | { | |
1093 | if (pb != NULL) | |
1094 | return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); | |
1095 | else | |
1096 | return 0; | |
1097 | } | |
1098 | ||
1099 | ||
1100 | /* | |
1101 | * pl2303_buf_put | |
1102 | * | |
1103 | * Copy data data from a user buffer and put it into the circular buffer. | |
1104 | * Restrict to the amount of space available. | |
1105 | * | |
1106 | * Return the number of bytes copied. | |
1107 | */ | |
1108 | ||
1109 | static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf, | |
1110 | unsigned int count) | |
1111 | { | |
1112 | ||
1113 | unsigned int len; | |
1114 | ||
1115 | ||
1116 | if (pb == NULL) | |
1117 | return 0; | |
1118 | ||
1119 | len = pl2303_buf_space_avail(pb); | |
1120 | if (count > len) | |
1121 | count = len; | |
1122 | ||
1123 | if (count == 0) | |
1124 | return 0; | |
1125 | ||
1126 | len = pb->buf_buf + pb->buf_size - pb->buf_put; | |
1127 | if (count > len) { | |
1128 | memcpy(pb->buf_put, buf, len); | |
1129 | memcpy(pb->buf_buf, buf+len, count - len); | |
1130 | pb->buf_put = pb->buf_buf + count - len; | |
1131 | } else { | |
1132 | memcpy(pb->buf_put, buf, count); | |
1133 | if (count < len) | |
1134 | pb->buf_put += count; | |
1135 | else /* count == len */ | |
1136 | pb->buf_put = pb->buf_buf; | |
1137 | } | |
1138 | ||
1139 | return count; | |
1140 | ||
1141 | } | |
1142 | ||
1143 | ||
1144 | /* | |
1145 | * pl2303_buf_get | |
1146 | * | |
1147 | * Get data from the circular buffer and copy to the given buffer. | |
1148 | * Restrict to the amount of data available. | |
1149 | * | |
1150 | * Return the number of bytes copied. | |
1151 | */ | |
1152 | ||
1153 | static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, | |
1154 | unsigned int count) | |
1155 | { | |
1156 | ||
1157 | unsigned int len; | |
1158 | ||
1159 | ||
1160 | if (pb == NULL) | |
1161 | return 0; | |
1162 | ||
1163 | len = pl2303_buf_data_avail(pb); | |
1164 | if (count > len) | |
1165 | count = len; | |
1166 | ||
1167 | if (count == 0) | |
1168 | return 0; | |
1169 | ||
1170 | len = pb->buf_buf + pb->buf_size - pb->buf_get; | |
1171 | if (count > len) { | |
1172 | memcpy(buf, pb->buf_get, len); | |
1173 | memcpy(buf+len, pb->buf_buf, count - len); | |
1174 | pb->buf_get = pb->buf_buf + count - len; | |
1175 | } else { | |
1176 | memcpy(buf, pb->buf_get, count); | |
1177 | if (count < len) | |
1178 | pb->buf_get += count; | |
1179 | else /* count == len */ | |
1180 | pb->buf_get = pb->buf_buf; | |
1181 | } | |
1182 | ||
1183 | return count; | |
1184 | ||
1185 | } | |
1186 | ||
1187 | static int __init pl2303_init (void) | |
1188 | { | |
1189 | int retval; | |
1190 | retval = usb_serial_register(&pl2303_device); | |
1191 | if (retval) | |
1192 | goto failed_usb_serial_register; | |
1193 | retval = usb_register(&pl2303_driver); | |
1194 | if (retval) | |
1195 | goto failed_usb_register; | |
1196 | info(DRIVER_DESC " " DRIVER_VERSION); | |
1197 | return 0; | |
1198 | failed_usb_register: | |
1199 | usb_serial_deregister(&pl2303_device); | |
1200 | failed_usb_serial_register: | |
1201 | return retval; | |
1202 | } | |
1203 | ||
1204 | ||
1205 | static void __exit pl2303_exit (void) | |
1206 | { | |
1207 | usb_deregister (&pl2303_driver); | |
1208 | usb_serial_deregister (&pl2303_device); | |
1209 | } | |
1210 | ||
1211 | ||
1212 | module_init(pl2303_init); | |
1213 | module_exit(pl2303_exit); | |
1214 | ||
1215 | MODULE_DESCRIPTION(DRIVER_DESC); | |
1216 | MODULE_VERSION(DRIVER_VERSION); | |
1217 | MODULE_LICENSE("GPL"); | |
1218 | ||
1219 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
1220 | MODULE_PARM_DESC(debug, "Debug enabled or not"); | |
1221 |