Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * MCT (Magic Control Technology Corp.) USB RS232 Converter Driver | |
3 | * | |
4 | * Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch) | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is largely derived from the Belkin USB Serial Adapter Driver | |
12 | * (see belkin_sa.[ch]). All of the information about the device was acquired | |
13 | * by using SniffUSB on Windows98. For technical details see mct_u232.h. | |
14 | * | |
15 | * William G. Greathouse and Greg Kroah-Hartman provided great help on how to | |
16 | * do the reverse engineering and how to write a USB serial device driver. | |
17 | * | |
18 | * TO BE DONE, TO BE CHECKED: | |
19 | * DTR/RTS signal handling may be incomplete or incorrect. I have mainly | |
20 | * implemented what I have seen with SniffUSB or found in belkin_sa.c. | |
21 | * For further TODOs check also belkin_sa.c. | |
22 | * | |
23 | * TEST STATUS: | |
24 | * Basic tests have been performed with minicom/zmodem transfers and | |
25 | * modem dialing under Linux 2.4.0-test10 (for me it works fine). | |
26 | * | |
27 | * 04-Nov-2003 Bill Marr <marr at flex dot com> | |
28 | * - Mimic Windows driver by sending 2 USB 'device request' messages | |
29 | * following normal 'baud rate change' message. This allows data to be | |
30 | * transmitted to RS-232 devices which don't assert the 'CTS' signal. | |
31 | * | |
32 | * 10-Nov-2001 Wolfgang Grandegger | |
33 | * - Fixed an endianess problem with the baudrate selection for PowerPC. | |
34 | * | |
35 | * 06-Dec-2001 Martin Hamilton <martinh@gnu.org> | |
36 | * Added support for the Belkin F5U109 DB9 adaptor | |
37 | * | |
38 | * 30-May-2001 Greg Kroah-Hartman | |
39 | * switched from using spinlock to a semaphore, which fixes lots of problems. | |
40 | * | |
41 | * 04-May-2001 Stelian Pop | |
42 | * - Set the maximum bulk output size for Sitecom U232-P25 model to 16 bytes | |
43 | * instead of the device reported 32 (using 32 bytes causes many data | |
44 | * loss, Windows driver uses 16 too). | |
45 | * | |
46 | * 02-May-2001 Stelian Pop | |
47 | * - Fixed the baud calculation for Sitecom U232-P25 model | |
48 | * | |
49 | * 08-Apr-2001 gb | |
50 | * - Identify version on module load. | |
51 | * | |
52 | * 06-Jan-2001 Cornel Ciocirlan | |
53 | * - Added support for Sitecom U232-P25 model (Product Id 0x0230) | |
54 | * - Added support for D-Link DU-H3SP USB BAY (Product Id 0x0200) | |
55 | * | |
56 | * 29-Nov-2000 Greg Kroah-Hartman | |
57 | * - Added device id table to fit with 2.4.0-test11 structure. | |
58 | * - took out DEAL_WITH_TWO_INT_IN_ENDPOINTS #define as it's not needed | |
59 | * (lots of things will change if/when the usb-serial core changes to | |
60 | * handle these issues. | |
61 | * | |
62 | * 27-Nov-2000 Wolfgang Grandegger | |
63 | * A version for kernel 2.4.0-test10 released to the Linux community | |
64 | * (via linux-usb-devel). | |
65 | */ | |
66 | ||
1da177e4 LT |
67 | #include <linux/kernel.h> |
68 | #include <linux/errno.h> | |
69 | #include <linux/init.h> | |
70 | #include <linux/slab.h> | |
71 | #include <linux/tty.h> | |
72 | #include <linux/tty_driver.h> | |
73 | #include <linux/tty_flip.h> | |
74 | #include <linux/module.h> | |
75 | #include <linux/spinlock.h> | |
76 | #include <asm/uaccess.h> | |
77 | #include <linux/usb.h> | |
a969888c | 78 | #include <linux/usb/serial.h> |
1da177e4 LT |
79 | #include "mct_u232.h" |
80 | ||
81 | /* | |
82 | * Version Information | |
83 | */ | |
84 | #define DRIVER_VERSION "z2.0" /* Linux in-kernel version */ | |
85 | #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>" | |
86 | #define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver" | |
87 | ||
88 | static int debug; | |
89 | ||
90 | /* | |
91 | * Function prototypes | |
92 | */ | |
93 | static int mct_u232_startup (struct usb_serial *serial); | |
94 | static void mct_u232_shutdown (struct usb_serial *serial); | |
95 | static int mct_u232_open (struct usb_serial_port *port, | |
96 | struct file *filp); | |
97 | static void mct_u232_close (struct usb_serial_port *port, | |
98 | struct file *filp); | |
7d12e780 | 99 | static void mct_u232_read_int_callback (struct urb *urb); |
1da177e4 LT |
100 | static void mct_u232_set_termios (struct usb_serial_port *port, |
101 | struct termios * old); | |
102 | static int mct_u232_ioctl (struct usb_serial_port *port, | |
103 | struct file * file, | |
104 | unsigned int cmd, | |
105 | unsigned long arg); | |
106 | static void mct_u232_break_ctl (struct usb_serial_port *port, | |
107 | int break_state ); | |
108 | static int mct_u232_tiocmget (struct usb_serial_port *port, | |
109 | struct file *file); | |
110 | static int mct_u232_tiocmset (struct usb_serial_port *port, | |
111 | struct file *file, unsigned int set, | |
112 | unsigned int clear); | |
113 | /* | |
114 | * All of the device info needed for the MCT USB-RS232 converter. | |
115 | */ | |
116 | static struct usb_device_id id_table_combined [] = { | |
117 | { USB_DEVICE(MCT_U232_VID, MCT_U232_PID) }, | |
118 | { USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) }, | |
119 | { USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) }, | |
120 | { USB_DEVICE(MCT_U232_BELKIN_F5U109_VID, MCT_U232_BELKIN_F5U109_PID) }, | |
121 | { } /* Terminating entry */ | |
122 | }; | |
123 | ||
124 | MODULE_DEVICE_TABLE (usb, id_table_combined); | |
125 | ||
126 | static struct usb_driver mct_u232_driver = { | |
1da177e4 LT |
127 | .name = "mct_u232", |
128 | .probe = usb_serial_probe, | |
129 | .disconnect = usb_serial_disconnect, | |
130 | .id_table = id_table_combined, | |
ba9dc657 | 131 | .no_dynamic_id = 1, |
1da177e4 LT |
132 | }; |
133 | ||
ea65370d | 134 | static struct usb_serial_driver mct_u232_device = { |
18fcac35 GKH |
135 | .driver = { |
136 | .owner = THIS_MODULE, | |
269bda1c | 137 | .name = "mct_u232", |
18fcac35 | 138 | }, |
269bda1c | 139 | .description = "MCT U232", |
1da177e4 LT |
140 | .id_table = id_table_combined, |
141 | .num_interrupt_in = 2, | |
142 | .num_bulk_in = 0, | |
143 | .num_bulk_out = 1, | |
144 | .num_ports = 1, | |
145 | .open = mct_u232_open, | |
146 | .close = mct_u232_close, | |
147 | .read_int_callback = mct_u232_read_int_callback, | |
148 | .ioctl = mct_u232_ioctl, | |
149 | .set_termios = mct_u232_set_termios, | |
150 | .break_ctl = mct_u232_break_ctl, | |
151 | .tiocmget = mct_u232_tiocmget, | |
152 | .tiocmset = mct_u232_tiocmset, | |
153 | .attach = mct_u232_startup, | |
154 | .shutdown = mct_u232_shutdown, | |
155 | }; | |
156 | ||
157 | ||
158 | struct mct_u232_private { | |
159 | spinlock_t lock; | |
160 | unsigned int control_state; /* Modem Line Setting (TIOCM) */ | |
161 | unsigned char last_lcr; /* Line Control Register */ | |
162 | unsigned char last_lsr; /* Line Status Register */ | |
163 | unsigned char last_msr; /* Modem Status Register */ | |
164 | }; | |
165 | ||
166 | /* | |
167 | * Handle vendor specific USB requests | |
168 | */ | |
169 | ||
170 | #define WDR_TIMEOUT 5000 /* default urb timeout */ | |
171 | ||
172 | /* | |
173 | * Later day 2.6.0-test kernels have new baud rates like B230400 which | |
174 | * we do not know how to support. We ignore them for the moment. | |
175 | * XXX Rate-limit the error message, it's user triggerable. | |
176 | */ | |
177 | static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value) | |
178 | { | |
179 | if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID | |
180 | || le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) { | |
181 | switch (value) { | |
182 | case B300: return 0x01; | |
183 | case B600: return 0x02; /* this one not tested */ | |
184 | case B1200: return 0x03; | |
185 | case B2400: return 0x04; | |
186 | case B4800: return 0x06; | |
187 | case B9600: return 0x08; | |
188 | case B19200: return 0x09; | |
189 | case B38400: return 0x0a; | |
190 | case B57600: return 0x0b; | |
191 | case B115200: return 0x0c; | |
192 | default: | |
193 | err("MCT USB-RS232: unsupported baudrate request 0x%x," | |
194 | " using default of B9600", value); | |
195 | return 0x08; | |
196 | } | |
197 | } else { | |
198 | switch (value) { | |
199 | case B300: value = 300; break; | |
200 | case B600: value = 600; break; | |
201 | case B1200: value = 1200; break; | |
202 | case B2400: value = 2400; break; | |
203 | case B4800: value = 4800; break; | |
204 | case B9600: value = 9600; break; | |
205 | case B19200: value = 19200; break; | |
206 | case B38400: value = 38400; break; | |
207 | case B57600: value = 57600; break; | |
208 | case B115200: value = 115200; break; | |
209 | default: | |
210 | err("MCT USB-RS232: unsupported baudrate request 0x%x," | |
211 | " using default of B9600", value); | |
212 | value = 9600; | |
213 | } | |
214 | return 115200/value; | |
215 | } | |
216 | } | |
217 | ||
218 | static int mct_u232_set_baud_rate(struct usb_serial *serial, int value) | |
219 | { | |
220 | __le32 divisor; | |
221 | int rc; | |
222 | unsigned char zero_byte = 0; | |
223 | ||
224 | divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value)); | |
225 | ||
226 | rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
227 | MCT_U232_SET_BAUD_RATE_REQUEST, | |
228 | MCT_U232_SET_REQUEST_TYPE, | |
229 | 0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE, | |
230 | WDR_TIMEOUT); | |
231 | if (rc < 0) | |
232 | err("Set BAUD RATE %d failed (error = %d)", value, rc); | |
233 | dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor); | |
234 | ||
235 | /* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which | |
236 | always sends two extra USB 'device request' messages after the | |
237 | 'baud rate change' message. The actual functionality of the | |
238 | request codes in these messages is not fully understood but these | |
239 | particular codes are never seen in any operation besides a baud | |
240 | rate change. Both of these messages send a single byte of data | |
241 | whose value is always zero. The second of these two extra messages | |
242 | is required in order for data to be properly written to an RS-232 | |
243 | device which does not assert the 'CTS' signal. */ | |
244 | ||
245 | rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
246 | MCT_U232_SET_UNKNOWN1_REQUEST, | |
247 | MCT_U232_SET_REQUEST_TYPE, | |
248 | 0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE, | |
249 | WDR_TIMEOUT); | |
250 | if (rc < 0) | |
251 | err("Sending USB device request code %d failed (error = %d)", | |
252 | MCT_U232_SET_UNKNOWN1_REQUEST, rc); | |
253 | ||
254 | rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
255 | MCT_U232_SET_UNKNOWN2_REQUEST, | |
256 | MCT_U232_SET_REQUEST_TYPE, | |
257 | 0, 0, &zero_byte, MCT_U232_SET_UNKNOWN2_SIZE, | |
258 | WDR_TIMEOUT); | |
259 | if (rc < 0) | |
260 | err("Sending USB device request code %d failed (error = %d)", | |
261 | MCT_U232_SET_UNKNOWN2_REQUEST, rc); | |
262 | ||
263 | return rc; | |
264 | } /* mct_u232_set_baud_rate */ | |
265 | ||
266 | static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr) | |
267 | { | |
268 | int rc; | |
269 | rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
270 | MCT_U232_SET_LINE_CTRL_REQUEST, | |
271 | MCT_U232_SET_REQUEST_TYPE, | |
272 | 0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE, | |
273 | WDR_TIMEOUT); | |
274 | if (rc < 0) | |
275 | err("Set LINE CTRL 0x%x failed (error = %d)", lcr, rc); | |
276 | dbg("set_line_ctrl: 0x%x", lcr); | |
277 | return rc; | |
278 | } /* mct_u232_set_line_ctrl */ | |
279 | ||
280 | static int mct_u232_set_modem_ctrl(struct usb_serial *serial, | |
281 | unsigned int control_state) | |
282 | { | |
283 | int rc; | |
284 | unsigned char mcr = MCT_U232_MCR_NONE; | |
285 | ||
286 | if (control_state & TIOCM_DTR) | |
287 | mcr |= MCT_U232_MCR_DTR; | |
288 | if (control_state & TIOCM_RTS) | |
289 | mcr |= MCT_U232_MCR_RTS; | |
290 | ||
291 | rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
292 | MCT_U232_SET_MODEM_CTRL_REQUEST, | |
293 | MCT_U232_SET_REQUEST_TYPE, | |
294 | 0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE, | |
295 | WDR_TIMEOUT); | |
296 | if (rc < 0) | |
297 | err("Set MODEM CTRL 0x%x failed (error = %d)", mcr, rc); | |
298 | dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr); | |
299 | ||
300 | return rc; | |
301 | } /* mct_u232_set_modem_ctrl */ | |
302 | ||
303 | static int mct_u232_get_modem_stat(struct usb_serial *serial, unsigned char *msr) | |
304 | { | |
305 | int rc; | |
306 | rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), | |
307 | MCT_U232_GET_MODEM_STAT_REQUEST, | |
308 | MCT_U232_GET_REQUEST_TYPE, | |
309 | 0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE, | |
310 | WDR_TIMEOUT); | |
311 | if (rc < 0) { | |
312 | err("Get MODEM STATus failed (error = %d)", rc); | |
313 | *msr = 0; | |
314 | } | |
315 | dbg("get_modem_stat: 0x%x", *msr); | |
316 | return rc; | |
317 | } /* mct_u232_get_modem_stat */ | |
318 | ||
319 | static void mct_u232_msr_to_state(unsigned int *control_state, unsigned char msr) | |
320 | { | |
321 | /* Translate Control Line states */ | |
322 | if (msr & MCT_U232_MSR_DSR) | |
323 | *control_state |= TIOCM_DSR; | |
324 | else | |
325 | *control_state &= ~TIOCM_DSR; | |
326 | if (msr & MCT_U232_MSR_CTS) | |
327 | *control_state |= TIOCM_CTS; | |
328 | else | |
329 | *control_state &= ~TIOCM_CTS; | |
330 | if (msr & MCT_U232_MSR_RI) | |
331 | *control_state |= TIOCM_RI; | |
332 | else | |
333 | *control_state &= ~TIOCM_RI; | |
334 | if (msr & MCT_U232_MSR_CD) | |
335 | *control_state |= TIOCM_CD; | |
336 | else | |
337 | *control_state &= ~TIOCM_CD; | |
338 | dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state); | |
339 | } /* mct_u232_msr_to_state */ | |
340 | ||
341 | /* | |
342 | * Driver's tty interface functions | |
343 | */ | |
344 | ||
345 | static int mct_u232_startup (struct usb_serial *serial) | |
346 | { | |
347 | struct mct_u232_private *priv; | |
348 | struct usb_serial_port *port, *rport; | |
349 | ||
80b6ca48 | 350 | priv = kzalloc(sizeof(struct mct_u232_private), GFP_KERNEL); |
1da177e4 LT |
351 | if (!priv) |
352 | return -ENOMEM; | |
1da177e4 LT |
353 | spin_lock_init(&priv->lock); |
354 | usb_set_serial_port_data(serial->port[0], priv); | |
355 | ||
356 | init_waitqueue_head(&serial->port[0]->write_wait); | |
357 | ||
358 | /* Puh, that's dirty */ | |
359 | port = serial->port[0]; | |
360 | rport = serial->port[1]; | |
361 | if (port->read_urb) { | |
362 | /* No unlinking, it wasn't submitted yet. */ | |
363 | usb_free_urb(port->read_urb); | |
364 | } | |
365 | port->read_urb = rport->interrupt_in_urb; | |
366 | rport->interrupt_in_urb = NULL; | |
367 | port->read_urb->context = port; | |
368 | ||
369 | return (0); | |
370 | } /* mct_u232_startup */ | |
371 | ||
372 | ||
373 | static void mct_u232_shutdown (struct usb_serial *serial) | |
374 | { | |
375 | struct mct_u232_private *priv; | |
376 | int i; | |
377 | ||
378 | dbg("%s", __FUNCTION__); | |
379 | ||
380 | for (i=0; i < serial->num_ports; ++i) { | |
381 | /* My special items, the standard routines free my urbs */ | |
382 | priv = usb_get_serial_port_data(serial->port[i]); | |
383 | if (priv) { | |
384 | usb_set_serial_port_data(serial->port[i], NULL); | |
385 | kfree(priv); | |
386 | } | |
387 | } | |
388 | } /* mct_u232_shutdown */ | |
389 | ||
390 | static int mct_u232_open (struct usb_serial_port *port, struct file *filp) | |
391 | { | |
392 | struct usb_serial *serial = port->serial; | |
393 | struct mct_u232_private *priv = usb_get_serial_port_data(port); | |
394 | int retval = 0; | |
395 | unsigned int control_state; | |
396 | unsigned long flags; | |
397 | unsigned char last_lcr; | |
398 | unsigned char last_msr; | |
399 | ||
400 | dbg("%s port %d", __FUNCTION__, port->number); | |
401 | ||
402 | /* Compensate for a hardware bug: although the Sitecom U232-P25 | |
403 | * device reports a maximum output packet size of 32 bytes, | |
404 | * it seems to be able to accept only 16 bytes (and that's what | |
405 | * SniffUSB says too...) | |
406 | */ | |
407 | if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID) | |
408 | port->bulk_out_size = 16; | |
409 | ||
410 | /* Do a defined restart: the normal serial device seems to | |
411 | * always turn on DTR and RTS here, so do the same. I'm not | |
412 | * sure if this is really necessary. But it should not harm | |
413 | * either. | |
414 | */ | |
415 | spin_lock_irqsave(&priv->lock, flags); | |
416 | if (port->tty->termios->c_cflag & CBAUD) | |
417 | priv->control_state = TIOCM_DTR | TIOCM_RTS; | |
418 | else | |
419 | priv->control_state = 0; | |
420 | ||
421 | priv->last_lcr = (MCT_U232_DATA_BITS_8 | | |
422 | MCT_U232_PARITY_NONE | | |
423 | MCT_U232_STOP_BITS_1); | |
424 | control_state = priv->control_state; | |
425 | last_lcr = priv->last_lcr; | |
426 | spin_unlock_irqrestore(&priv->lock, flags); | |
427 | mct_u232_set_modem_ctrl(serial, control_state); | |
428 | mct_u232_set_line_ctrl(serial, last_lcr); | |
429 | ||
430 | /* Read modem status and update control state */ | |
431 | mct_u232_get_modem_stat(serial, &last_msr); | |
432 | spin_lock_irqsave(&priv->lock, flags); | |
433 | priv->last_msr = last_msr; | |
434 | mct_u232_msr_to_state(&priv->control_state, priv->last_msr); | |
435 | spin_unlock_irqrestore(&priv->lock, flags); | |
436 | ||
437 | port->read_urb->dev = port->serial->dev; | |
438 | retval = usb_submit_urb(port->read_urb, GFP_KERNEL); | |
439 | if (retval) { | |
440 | err("usb_submit_urb(read bulk) failed pipe 0x%x err %d", | |
441 | port->read_urb->pipe, retval); | |
442 | goto exit; | |
443 | } | |
444 | ||
445 | port->interrupt_in_urb->dev = port->serial->dev; | |
446 | retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); | |
447 | if (retval) | |
448 | err(" usb_submit_urb(read int) failed pipe 0x%x err %d", | |
449 | port->interrupt_in_urb->pipe, retval); | |
450 | ||
451 | exit: | |
452 | return 0; | |
453 | } /* mct_u232_open */ | |
454 | ||
455 | ||
456 | static void mct_u232_close (struct usb_serial_port *port, struct file *filp) | |
457 | { | |
458 | dbg("%s port %d", __FUNCTION__, port->number); | |
459 | ||
460 | if (port->serial->dev) { | |
461 | /* shutdown our urbs */ | |
462 | usb_kill_urb(port->write_urb); | |
463 | usb_kill_urb(port->read_urb); | |
464 | usb_kill_urb(port->interrupt_in_urb); | |
465 | } | |
466 | } /* mct_u232_close */ | |
467 | ||
468 | ||
7d12e780 | 469 | static void mct_u232_read_int_callback (struct urb *urb) |
1da177e4 LT |
470 | { |
471 | struct usb_serial_port *port = (struct usb_serial_port *)urb->context; | |
472 | struct mct_u232_private *priv = usb_get_serial_port_data(port); | |
473 | struct usb_serial *serial = port->serial; | |
474 | struct tty_struct *tty; | |
475 | unsigned char *data = urb->transfer_buffer; | |
476 | int status; | |
477 | unsigned long flags; | |
478 | ||
479 | switch (urb->status) { | |
480 | case 0: | |
481 | /* success */ | |
482 | break; | |
483 | case -ECONNRESET: | |
484 | case -ENOENT: | |
485 | case -ESHUTDOWN: | |
486 | /* this urb is terminated, clean up */ | |
487 | dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); | |
488 | return; | |
489 | default: | |
490 | dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); | |
491 | goto exit; | |
492 | } | |
493 | ||
494 | if (!serial) { | |
495 | dbg("%s - bad serial pointer, exiting", __FUNCTION__); | |
496 | return; | |
497 | } | |
498 | ||
499 | dbg("%s - port %d", __FUNCTION__, port->number); | |
500 | usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); | |
501 | ||
502 | /* | |
503 | * Work-a-round: handle the 'usual' bulk-in pipe here | |
504 | */ | |
505 | if (urb->transfer_buffer_length > 2) { | |
506 | int i; | |
507 | tty = port->tty; | |
508 | if (urb->actual_length) { | |
509 | for (i = 0; i < urb->actual_length ; ++i) { | |
510 | tty_insert_flip_char(tty, data[i], 0); | |
511 | } | |
512 | tty_flip_buffer_push(tty); | |
513 | } | |
514 | goto exit; | |
515 | } | |
516 | ||
517 | /* | |
518 | * The interrupt-in pipe signals exceptional conditions (modem line | |
519 | * signal changes and errors). data[0] holds MSR, data[1] holds LSR. | |
520 | */ | |
521 | spin_lock_irqsave(&priv->lock, flags); | |
522 | priv->last_msr = data[MCT_U232_MSR_INDEX]; | |
523 | ||
524 | /* Record Control Line states */ | |
525 | mct_u232_msr_to_state(&priv->control_state, priv->last_msr); | |
526 | ||
527 | #if 0 | |
528 | /* Not yet handled. See belin_sa.c for further information */ | |
529 | /* Now to report any errors */ | |
530 | priv->last_lsr = data[MCT_U232_LSR_INDEX]; | |
531 | /* | |
532 | * fill in the flip buffer here, but I do not know the relation | |
533 | * to the current/next receive buffer or characters. I need | |
534 | * to look in to this before committing any code. | |
535 | */ | |
536 | if (priv->last_lsr & MCT_U232_LSR_ERR) { | |
537 | tty = port->tty; | |
538 | /* Overrun Error */ | |
539 | if (priv->last_lsr & MCT_U232_LSR_OE) { | |
540 | } | |
541 | /* Parity Error */ | |
542 | if (priv->last_lsr & MCT_U232_LSR_PE) { | |
543 | } | |
544 | /* Framing Error */ | |
545 | if (priv->last_lsr & MCT_U232_LSR_FE) { | |
546 | } | |
547 | /* Break Indicator */ | |
548 | if (priv->last_lsr & MCT_U232_LSR_BI) { | |
549 | } | |
550 | } | |
551 | #endif | |
552 | spin_unlock_irqrestore(&priv->lock, flags); | |
553 | exit: | |
554 | status = usb_submit_urb (urb, GFP_ATOMIC); | |
555 | if (status) | |
556 | err ("%s - usb_submit_urb failed with result %d", | |
557 | __FUNCTION__, status); | |
558 | } /* mct_u232_read_int_callback */ | |
559 | ||
560 | static void mct_u232_set_termios (struct usb_serial_port *port, | |
561 | struct termios *old_termios) | |
562 | { | |
563 | struct usb_serial *serial = port->serial; | |
564 | struct mct_u232_private *priv = usb_get_serial_port_data(port); | |
565 | unsigned int iflag = port->tty->termios->c_iflag; | |
566 | unsigned int cflag = port->tty->termios->c_cflag; | |
567 | unsigned int old_cflag = old_termios->c_cflag; | |
568 | unsigned long flags; | |
569 | unsigned int control_state, new_state; | |
570 | unsigned char last_lcr; | |
571 | ||
572 | /* get a local copy of the current port settings */ | |
573 | spin_lock_irqsave(&priv->lock, flags); | |
574 | control_state = priv->control_state; | |
575 | spin_unlock_irqrestore(&priv->lock, flags); | |
576 | last_lcr = 0; | |
577 | ||
578 | /* | |
579 | * Update baud rate. | |
580 | * Do not attempt to cache old rates and skip settings, | |
581 | * disconnects screw such tricks up completely. | |
582 | * Premature optimization is the root of all evil. | |
583 | */ | |
584 | ||
585 | /* reassert DTR and (maybe) RTS on transition from B0 */ | |
586 | if ((old_cflag & CBAUD) == B0) { | |
587 | dbg("%s: baud was B0", __FUNCTION__); | |
588 | control_state |= TIOCM_DTR; | |
589 | /* don't set RTS if using hardware flow control */ | |
590 | if (!(old_cflag & CRTSCTS)) { | |
591 | control_state |= TIOCM_RTS; | |
592 | } | |
593 | mct_u232_set_modem_ctrl(serial, control_state); | |
594 | } | |
595 | ||
596 | mct_u232_set_baud_rate(serial, cflag & CBAUD); | |
597 | ||
598 | if ((cflag & CBAUD) == B0 ) { | |
599 | dbg("%s: baud is B0", __FUNCTION__); | |
600 | /* Drop RTS and DTR */ | |
601 | control_state &= ~(TIOCM_DTR | TIOCM_RTS); | |
602 | mct_u232_set_modem_ctrl(serial, control_state); | |
603 | } | |
604 | ||
605 | /* | |
606 | * Update line control register (LCR) | |
607 | */ | |
608 | ||
609 | /* set the parity */ | |
610 | if (cflag & PARENB) | |
611 | last_lcr |= (cflag & PARODD) ? | |
612 | MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN; | |
613 | else | |
614 | last_lcr |= MCT_U232_PARITY_NONE; | |
615 | ||
616 | /* set the number of data bits */ | |
617 | switch (cflag & CSIZE) { | |
618 | case CS5: | |
619 | last_lcr |= MCT_U232_DATA_BITS_5; break; | |
620 | case CS6: | |
621 | last_lcr |= MCT_U232_DATA_BITS_6; break; | |
622 | case CS7: | |
623 | last_lcr |= MCT_U232_DATA_BITS_7; break; | |
624 | case CS8: | |
625 | last_lcr |= MCT_U232_DATA_BITS_8; break; | |
626 | default: | |
627 | err("CSIZE was not CS5-CS8, using default of 8"); | |
628 | last_lcr |= MCT_U232_DATA_BITS_8; | |
629 | break; | |
630 | } | |
631 | ||
632 | /* set the number of stop bits */ | |
633 | last_lcr |= (cflag & CSTOPB) ? | |
634 | MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1; | |
635 | ||
636 | mct_u232_set_line_ctrl(serial, last_lcr); | |
637 | ||
638 | /* | |
639 | * Set flow control: well, I do not really now how to handle DTR/RTS. | |
640 | * Just do what we have seen with SniffUSB on Win98. | |
641 | */ | |
642 | /* Drop DTR/RTS if no flow control otherwise assert */ | |
643 | new_state = control_state; | |
644 | if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS)) | |
645 | new_state |= TIOCM_DTR | TIOCM_RTS; | |
646 | else | |
647 | new_state &= ~(TIOCM_DTR | TIOCM_RTS); | |
648 | if (new_state != control_state) { | |
649 | mct_u232_set_modem_ctrl(serial, new_state); | |
650 | control_state = new_state; | |
651 | } | |
652 | ||
653 | /* save off the modified port settings */ | |
654 | spin_lock_irqsave(&priv->lock, flags); | |
655 | priv->control_state = control_state; | |
656 | priv->last_lcr = last_lcr; | |
657 | spin_unlock_irqrestore(&priv->lock, flags); | |
658 | } /* mct_u232_set_termios */ | |
659 | ||
660 | static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state ) | |
661 | { | |
662 | struct usb_serial *serial = port->serial; | |
663 | struct mct_u232_private *priv = usb_get_serial_port_data(port); | |
664 | unsigned char lcr; | |
665 | unsigned long flags; | |
666 | ||
667 | dbg("%sstate=%d", __FUNCTION__, break_state); | |
668 | ||
669 | spin_lock_irqsave(&priv->lock, flags); | |
670 | lcr = priv->last_lcr; | |
671 | spin_unlock_irqrestore(&priv->lock, flags); | |
672 | ||
673 | if (break_state) | |
674 | lcr |= MCT_U232_SET_BREAK; | |
675 | ||
676 | mct_u232_set_line_ctrl(serial, lcr); | |
677 | } /* mct_u232_break_ctl */ | |
678 | ||
679 | ||
680 | static int mct_u232_tiocmget (struct usb_serial_port *port, struct file *file) | |
681 | { | |
682 | struct mct_u232_private *priv = usb_get_serial_port_data(port); | |
683 | unsigned int control_state; | |
684 | unsigned long flags; | |
685 | ||
686 | dbg("%s", __FUNCTION__); | |
687 | ||
688 | spin_lock_irqsave(&priv->lock, flags); | |
689 | control_state = priv->control_state; | |
690 | spin_unlock_irqrestore(&priv->lock, flags); | |
691 | ||
692 | return control_state; | |
693 | } | |
694 | ||
695 | static int mct_u232_tiocmset (struct usb_serial_port *port, struct file *file, | |
696 | unsigned int set, unsigned int clear) | |
697 | { | |
698 | struct usb_serial *serial = port->serial; | |
699 | struct mct_u232_private *priv = usb_get_serial_port_data(port); | |
700 | unsigned int control_state; | |
701 | unsigned long flags; | |
702 | ||
703 | dbg("%s", __FUNCTION__); | |
704 | ||
705 | spin_lock_irqsave(&priv->lock, flags); | |
706 | control_state = priv->control_state; | |
707 | ||
708 | if (set & TIOCM_RTS) | |
709 | control_state |= TIOCM_RTS; | |
710 | if (set & TIOCM_DTR) | |
711 | control_state |= TIOCM_DTR; | |
712 | if (clear & TIOCM_RTS) | |
713 | control_state &= ~TIOCM_RTS; | |
714 | if (clear & TIOCM_DTR) | |
715 | control_state &= ~TIOCM_DTR; | |
716 | ||
717 | priv->control_state = control_state; | |
718 | spin_unlock_irqrestore(&priv->lock, flags); | |
719 | return mct_u232_set_modem_ctrl(serial, control_state); | |
720 | } | |
721 | ||
722 | static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file, | |
723 | unsigned int cmd, unsigned long arg) | |
724 | { | |
725 | dbg("%scmd=0x%x", __FUNCTION__, cmd); | |
726 | ||
727 | /* Based on code from acm.c and others */ | |
728 | switch (cmd) { | |
729 | case TIOCMIWAIT: | |
730 | /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/ | |
731 | /* TODO */ | |
732 | return( 0 ); | |
733 | ||
734 | case TIOCGICOUNT: | |
735 | /* return count of modemline transitions */ | |
736 | /* TODO */ | |
737 | return 0; | |
738 | ||
739 | default: | |
740 | dbg("%s: arg not supported - 0x%04x", __FUNCTION__,cmd); | |
741 | return(-ENOIOCTLCMD); | |
742 | break; | |
743 | } | |
744 | return 0; | |
745 | } /* mct_u232_ioctl */ | |
746 | ||
747 | ||
748 | static int __init mct_u232_init (void) | |
749 | { | |
750 | int retval; | |
751 | retval = usb_serial_register(&mct_u232_device); | |
752 | if (retval) | |
753 | goto failed_usb_serial_register; | |
754 | retval = usb_register(&mct_u232_driver); | |
755 | if (retval) | |
756 | goto failed_usb_register; | |
757 | info(DRIVER_DESC " " DRIVER_VERSION); | |
758 | return 0; | |
759 | failed_usb_register: | |
760 | usb_serial_deregister(&mct_u232_device); | |
761 | failed_usb_serial_register: | |
762 | return retval; | |
763 | } | |
764 | ||
765 | ||
766 | static void __exit mct_u232_exit (void) | |
767 | { | |
768 | usb_deregister (&mct_u232_driver); | |
769 | usb_serial_deregister (&mct_u232_device); | |
770 | } | |
771 | ||
772 | ||
773 | module_init (mct_u232_init); | |
774 | module_exit(mct_u232_exit); | |
775 | ||
776 | MODULE_AUTHOR( DRIVER_AUTHOR ); | |
777 | MODULE_DESCRIPTION( DRIVER_DESC ); | |
778 | MODULE_LICENSE("GPL"); | |
779 | ||
780 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
781 | MODULE_PARM_DESC(debug, "Debug enabled or not"); |