Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | #define SUSBCRequest_SetBaudRateParityAndStopBits 1 |
2 | #define SUSBCR_SBR_MASK 0xFF00 | |
3 | #define SUSBCR_SBR_1200 0x0100 | |
4 | #define SUSBCR_SBR_9600 0x0200 | |
5 | #define SUSBCR_SBR_19200 0x0400 | |
6 | #define SUSBCR_SBR_28800 0x0800 | |
7 | #define SUSBCR_SBR_38400 0x1000 | |
8 | #define SUSBCR_SBR_57600 0x2000 | |
9 | #define SUSBCR_SBR_115200 0x4000 | |
10 | ||
11 | #define SUSBCR_SPASB_MASK 0x0070 | |
12 | #define SUSBCR_SPASB_NoParity 0x0010 | |
13 | #define SUSBCR_SPASB_OddParity 0x0020 | |
14 | #define SUSBCR_SPASB_EvenParity 0x0040 | |
15 | ||
16 | #define SUSBCR_SPASB_STPMASK 0x0003 | |
17 | #define SUSBCR_SPASB_1StopBit 0x0001 | |
18 | #define SUSBCR_SPASB_2StopBits 0x0002 | |
19 | ||
20 | #define SUSBCRequest_SetStatusLinesOrQueues 2 | |
21 | #define SUSBCR_SSL_SETRTS 0x0001 | |
22 | #define SUSBCR_SSL_CLRRTS 0x0002 | |
23 | #define SUSBCR_SSL_SETDTR 0x0004 | |
24 | #define SUSBCR_SSL_CLRDTR 0x0010 | |
25 | ||
e4582b6a GKH |
26 | /* Kill the pending/current writes to the comm port. */ |
27 | #define SUSBCR_SSL_PURGE_TXABORT 0x0100 | |
28 | /* Kill the pending/current reads to the comm port. */ | |
29 | #define SUSBCR_SSL_PURGE_RXABORT 0x0200 | |
30 | /* Kill the transmit queue if there. */ | |
31 | #define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 | |
32 | /* Kill the typeahead buffer if there. */ | |
33 | #define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 | |
1da177e4 LT |
34 | |
35 | #define SUSBCRequest_GetStatusLineState 4 | |
e4582b6a GKH |
36 | /* Any Character received */ |
37 | #define SUSBCR_GSL_RXCHAR 0x0001 | |
38 | /* Transmitt Queue Empty */ | |
39 | #define SUSBCR_GSL_TXEMPTY 0x0004 | |
40 | /* CTS changed state */ | |
41 | #define SUSBCR_GSL_CTS 0x0008 | |
42 | /* DSR changed state */ | |
43 | #define SUSBCR_GSL_DSR 0x0010 | |
44 | /* RLSD changed state */ | |
45 | #define SUSBCR_GSL_RLSD 0x0020 | |
46 | /* BREAK received */ | |
47 | #define SUSBCR_GSL_BREAK 0x0040 | |
48 | /* Line status error occurred */ | |
49 | #define SUSBCR_GSL_ERR 0x0080 | |
50 | /* Ring signal detected */ | |
51 | #define SUSBCR_GSL_RING 0x0100 | |
1da177e4 LT |
52 | |
53 | #define SUSBCRequest_Misc 8 | |
e4582b6a GKH |
54 | /* use a predefined reset sequence */ |
55 | #define SUSBCR_MSC_ResetReader 0x0001 | |
56 | /* use a predefined sequence to reset the internal queues */ | |
57 | #define SUSBCR_MSC_ResetAllQueues 0x0002 | |
1da177e4 LT |
58 | |
59 | #define SUSBCRequest_GetMisc 0x10 | |
e4582b6a GKH |
60 | |
61 | /* | |
62 | * get the firmware version from device, coded like this 0xHHLLBBPP with | |
63 | * HH = Firmware Version High Byte | |
64 | * LL = Firmware Version Low Byte | |
65 | * BB = Build Number | |
66 | * PP = Further Attributes | |
67 | */ | |
68 | #define SUSBCR_MSC_GetFWVersion 0x0001 | |
69 | ||
70 | /* | |
71 | * get the hardware version from device coded like this 0xHHLLPPRR with | |
72 | * HH = Software Version High Byte | |
73 | * LL = Software Version Low Byte | |
74 | * PP = Further Attributes | |
75 | * RR = Reserved for the hardware ID | |
76 | */ | |
77 | #define SUSBCR_MSC_GetHWVersion 0x0002 |