Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | #define SUSBCRequest_SetBaudRateParityAndStopBits 1 |
2 | #define SUSBCR_SBR_MASK 0xFF00 | |
3 | #define SUSBCR_SBR_1200 0x0100 | |
4 | #define SUSBCR_SBR_9600 0x0200 | |
5 | #define SUSBCR_SBR_19200 0x0400 | |
6 | #define SUSBCR_SBR_28800 0x0800 | |
7 | #define SUSBCR_SBR_38400 0x1000 | |
8 | #define SUSBCR_SBR_57600 0x2000 | |
9 | #define SUSBCR_SBR_115200 0x4000 | |
10 | ||
11 | #define SUSBCR_SPASB_MASK 0x0070 | |
12 | #define SUSBCR_SPASB_NoParity 0x0010 | |
13 | #define SUSBCR_SPASB_OddParity 0x0020 | |
14 | #define SUSBCR_SPASB_EvenParity 0x0040 | |
15 | ||
16 | #define SUSBCR_SPASB_STPMASK 0x0003 | |
17 | #define SUSBCR_SPASB_1StopBit 0x0001 | |
18 | #define SUSBCR_SPASB_2StopBits 0x0002 | |
19 | ||
20 | #define SUSBCRequest_SetStatusLinesOrQueues 2 | |
21 | #define SUSBCR_SSL_SETRTS 0x0001 | |
22 | #define SUSBCR_SSL_CLRRTS 0x0002 | |
23 | #define SUSBCR_SSL_SETDTR 0x0004 | |
24 | #define SUSBCR_SSL_CLRDTR 0x0010 | |
25 | ||
26 | #define SUSBCR_SSL_PURGE_TXABORT 0x0100 // Kill the pending/current writes to the comm port. | |
27 | #define SUSBCR_SSL_PURGE_RXABORT 0x0200 // Kill the pending/current reads to the comm port. | |
28 | #define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 // Kill the transmit queue if there. | |
29 | #define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 // Kill the typeahead buffer if there. | |
30 | ||
31 | #define SUSBCRequest_GetStatusLineState 4 | |
32 | #define SUSBCR_GSL_RXCHAR 0x0001 // Any Character received | |
33 | #define SUSBCR_GSL_TXEMPTY 0x0004 // Transmitt Queue Empty | |
34 | #define SUSBCR_GSL_CTS 0x0008 // CTS changed state | |
35 | #define SUSBCR_GSL_DSR 0x0010 // DSR changed state | |
36 | #define SUSBCR_GSL_RLSD 0x0020 // RLSD changed state | |
37 | #define SUSBCR_GSL_BREAK 0x0040 // BREAK received | |
38 | #define SUSBCR_GSL_ERR 0x0080 // Line status error occurred | |
39 | #define SUSBCR_GSL_RING 0x0100 // Ring signal detected | |
40 | ||
41 | #define SUSBCRequest_Misc 8 | |
42 | #define SUSBCR_MSC_ResetReader 0x0001 // use a predefined reset sequence | |
43 | #define SUSBCR_MSC_ResetAllQueues 0x0002 // use a predefined sequence to reset the internal queues | |
44 | ||
45 | #define SUSBCRequest_GetMisc 0x10 | |
46 | #define SUSBCR_MSC_GetFWVersion 0x0001 /* get the firmware version from device, | |
47 | coded like this 0xHHLLBBPP | |
48 | with HH = Firmware Version High Byte | |
49 | LL = Firmware Version Low Byte | |
50 | BB = Build Number | |
51 | PP = Further Attributes | |
52 | */ | |
53 | ||
54 | #define SUSBCR_MSC_GetHWVersion 0x0002 /* get the hardware version from device | |
55 | coded like this 0xHHLLPPRR | |
56 | with HH = Software Version High Byte | |
57 | LL = Software Version Low Byte | |
58 | PP = Further Attributes | |
59 | RR = Reserved for the hardware ID | |
60 | */ |