projects / linux-block.git / blame
| Commit | Line | Data |
|---|---|---|
| 1da177e4 LT |
1 | /* |
| 2 | * Definitions for the FTDI USB Single Port Serial Converter - | |
| 3 | * known as FTDI_SIO (Serial Input/Output application of the chipset) | |
| 4 | * | |
| 5 | * The example I have is known as the USC-1000 which is available from | |
| 6 | * http://www.dse.co.nz - cat no XH4214 It looks similar to this: | |
| 7 | * http://www.dansdata.com/usbser.htm but I can't be sure There are other | |
| 8 | * USC-1000s which don't look like my device though so beware! | |
| 9 | * | |
| 10 | * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, | |
| 11 | * USB on the other. | |
| 12 | * | |
| 13 | * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details | |
| 14 | * of the protocol required to talk to the device and ongoing assistence | |
| 15 | * during development. | |
| 16 | * | |
| 17 | * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the | |
| 18 | * FTDI_SIO implementation. | |
| 19 | * | |
| 96de0e25 | 20 | * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais |
| 1da177e4 LT |
21 | * from Rudolf Gugler |
| 22 | * | |
| 23 | */ | |
| 24 | ||
| 25 | #define FTDI_VID 0x0403 /* Vendor Id */ | |
| 26 | #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ | |
| 27 | #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ | |
| 28 | #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ | |
| 1da177e4 | 29 | #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ |
| d8b21606 | 30 | #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ |
| 1da177e4 LT |
31 | #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ |
| 32 | #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ | |
| 33 | #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ | |
| 868e440d | 34 | #define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ |
| 1da177e4 | 35 | |
| 641adaae | 36 | |
| 2011e924 JD |
37 | /* www.canusb.com Lawicel CANUSB device */ |
| 38 | #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ | |
| 39 | ||
| 40 | /* AlphaMicro Components AMC-232USB01 device */ | |
| 41 | #define FTDI_AMC232_PID 0xFF00 /* Product Id */ | |
| 42 | ||
| 72a9f958 RG |
43 | /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ |
| 44 | #define FTDI_ACTZWAVE_PID 0xF2D0 | |
| 45 | ||
| 46 | ||
| 96de0e25 | 47 | /* www.starting-point-systems.com µChameleon device */ |
| c0f8d561 CM |
48 | #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ |
| 49 | ||
| 1da177e4 LT |
50 | /* www.irtrans.de device */ |
| 51 | #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ | |
| 52 | ||
| 641adaae LN |
53 | |
| 54 | /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ | |
| 55 | #define FTDI_TTUSB_PID 0xFF20 /* Product Id */ | |
| 56 | ||
| 69737dfa LFC |
57 | /* iPlus device */ |
| 58 | #define FTDI_IPLUS_PID 0xD070 /* Product Id */ | |
| d099321b | 59 | #define FTDI_IPLUS2_PID 0xD071 /* Product Id */ |
| 69737dfa | 60 | |
| fad14a0d FS |
61 | /* DMX4ALL DMX Interfaces */ |
| 62 | #define FTDI_DMX4ALL 0xC850 | |
| 63 | ||
| 2adb80e9 GS |
64 | /* OpenDCC (www.opendcc.de) product id */ |
| 65 | #define FTDI_OPENDCC_PID 0xBFD8 | |
| 66 | ||
| 1da177e4 LT |
67 | /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ |
| 68 | /* they use the ftdi chipset for the USB interface and the vendor id is the same */ | |
| 69 | #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ | |
| 70 | #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ | |
| 71 | #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ | |
| 72 | #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ | |
| 73 | #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ | |
| 74 | #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ | |
| 75 | #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ | |
| 76 | #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ | |
| 77 | ||
| 78 | /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ | |
| 79 | /* broadband internet service. The following PID is exhibited by the usb device supplied */ | |
| 80 | /* (the VID is the standard ftdi vid (FTDI_VID) */ | |
| 81 | #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ | |
| 82 | ||
| ce40d290 WP |
83 | /* |
| 84 | * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device | |
| 85 | * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) | |
| 86 | * (the VID is the standard ftdi vid (FTDI_VID) */ | |
| 87 | #define FTDI_PCDJ_DAC2_PID 0xFA88 | |
| 88 | ||
| 1da177e4 LT |
89 | /* |
| 90 | * The following are the values for the Matrix Orbital LCD displays, | |
| 91 | * which are the FT232BM ( similar to the 8U232AM ) | |
| 92 | */ | |
| 93 | #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ | |
| 94 | #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ | |
| 95 | #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ | |
| 96 | #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ | |
| 97 | #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ | |
| 98 | #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ | |
| 99 | #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ | |
| 100 | ||
| 101 | /* Interbiometrics USB I/O Board */ | |
| 102 | /* Developed for Interbiometrics by Rudolf Gugler */ | |
| 103 | #define INTERBIOMETRICS_VID 0x1209 | |
| 104 | #define INTERBIOMETRICS_IOBOARD_PID 0x1002 | |
| 105 | #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 | |
| 106 | ||
| 107 | /* | |
| 108 | * The following are the values for the Perle Systems | |
| 109 | * UltraPort USB serial converters | |
| 110 | */ | |
| 111 | #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ | |
| 112 | ||
| 113 | /* | |
| 114 | * The following are the values for the Sealevel SeaLINK+ adapters. | |
| 115 | * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and | |
| 116 | * removed some PIDs that don't seem to match any existing products.) | |
| 117 | */ | |
| 118 | #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ | |
| 119 | #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ | |
| 120 | #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ | |
| 121 | #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ | |
| 122 | #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ | |
| a1484827 | 123 | #define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ |
| 1da177e4 LT |
124 | #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ |
| 125 | #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ | |
| 126 | #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ | |
| 127 | #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ | |
| 128 | #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ | |
| 129 | #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ | |
| 130 | #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ | |
| 131 | #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ | |
| 132 | #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ | |
| 133 | #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ | |
| 134 | #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ | |
| 135 | #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ | |
| 136 | #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ | |
| 137 | #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ | |
| 138 | #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ | |
| 139 | #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ | |
| 140 | #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ | |
| 141 | #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ | |
| 142 | #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ | |
| 143 | #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ | |
| 144 | #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ | |
| 145 | #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ | |
| 146 | #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ | |
| 147 | #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ | |
| 148 | #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ | |
| 149 | #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ | |
| 150 | #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ | |
| 151 | #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ | |
| 152 | #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ | |
| 153 | #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ | |
| 154 | #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ | |
| 155 | #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ | |
| 156 | #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ | |
| 157 | #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ | |
| 158 | #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ | |
| 159 | #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ | |
| 160 | #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ | |
| 161 | #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ | |
| 162 | #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ | |
| 163 | #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ | |
| 164 | #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ | |
| 165 | #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ | |
| 166 | ||
| b4723ae3 IA |
167 | /* |
| 168 | * The following are the values for two KOBIL chipcard terminals. | |
| 169 | */ | |
| 170 | #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ | |
| 171 | #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ | |
| 172 | #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ | |
| 173 | ||
| bf58fbd5 MB |
174 | /* |
| 175 | * Icom ID-1 digital transceiver | |
| 176 | */ | |
| 177 | ||
| 178 | #define ICOM_ID1_VID 0x0C26 | |
| 179 | #define ICOM_ID1_PID 0x0004 | |
| 180 | ||
| 7e0258fd IA |
181 | /* |
| 182 | * ASK.fr devices | |
| 183 | */ | |
| 184 | #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ | |
| 185 | ||
| 40c36092 KM |
186 | /* |
| 187 | * FTDI USB UART chips used in construction projects from the | |
| 188 | * Elektor Electronics magazine (http://elektor-electronics.co.uk) | |
| 189 | */ | |
| 190 | #define ELEKTOR_VID 0x0C7D | |
| 191 | #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ | |
| 192 | ||
| 1da177e4 LT |
193 | /* |
| 194 | * DSS-20 Sync Station for Sony Ericsson P800 | |
| 195 | */ | |
| 1da177e4 LT |
196 | #define FTDI_DSS20_PID 0xFC82 |
| 197 | ||
| 198 | /* | |
| 199 | * Home Electronics (www.home-electro.com) USB gadgets | |
| 200 | */ | |
| 093cf723 | 201 | #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ |
| 1da177e4 LT |
202 | |
| 203 | /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ | |
| 204 | /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ | |
| 205 | #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ | |
| 206 | ||
| 274a4bbc DP |
207 | /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ |
| 208 | ||
| 209 | #define FTDI_TNC_X_PID 0xEBE0 | |
| 210 | ||
| e6ac4a40 IA |
211 | /* |
| 212 | * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). | |
| 213 | * All of these devices use FTDI's vendor ID (0x0403). | |
| 214 | * | |
| 215 | * The previously included PID for the UO 100 module was incorrect. | |
| 216 | * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). | |
| 217 | * | |
| 218 | * Armin Laeuger originally sent the PID for the UM 100 module. | |
| 219 | */ | |
| 220 | #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ | |
| 221 | #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ | |
| 222 | #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ | |
| 223 | #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ | |
| 224 | /* Additional ELV PIDs that default to using the FTDI D2XX drivers on | |
| 225 | * MS Windows, rather than the FTDI Virtual Com Port drivers. | |
| 226 | * Maybe these will be easier to use with the libftdi/libusb user-space | |
| 227 | * drivers, or possibly the Comedi drivers in some cases. */ | |
| 228 | #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ | |
| 229 | #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ | |
| 230 | #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ | |
| 231 | #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ | |
| 232 | #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ | |
| 233 | #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ | |
| 234 | #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ | |
| 235 | #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ | |
| 236 | #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ | |
| 237 | #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ | |
| 238 | #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ | |
| 239 | #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ | |
| 240 | #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ | |
| 241 | #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ | |
| 242 | #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ | |
| 243 | #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ | |
| 244 | #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ | |
| 245 | #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ | |
| 246 | #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ | |
| 247 | #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ | |
| 42f8aa94 | 248 | #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ |
| 1da177e4 LT |
249 | |
| 250 | /* | |
| 251 | * Definitions for ID TECH (www.idt-net.com) devices | |
| 252 | */ | |
| 253 | #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ | |
| 254 | #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ | |
| 255 | ||
| 256 | /* | |
| 257 | * Definitions for Omnidirectional Control Technology, Inc. devices | |
| 258 | */ | |
| 259 | #define OCT_VID 0x0B39 /* OCT vendor ID */ | |
| 260 | /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ | |
| 6f92872c IA |
261 | /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ |
| 262 | /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ | |
| 1da177e4 LT |
263 | #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ |
| 264 | ||
| 265 | /* an infrared receiver for user access control with IR tags */ | |
| 266 | #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ | |
| 267 | ||
| c9c7746d RS |
268 | /* |
| 269 | * Definitions for Artemis astronomical USB based cameras | |
| 270 | * Check it at http://www.artemisccd.co.uk/ | |
| 271 | */ | |
| 272 | #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ | |
| 273 | ||
| 274 | /* | |
| 275 | * Definitions for ATIK Instruments astronomical USB based cameras | |
| 276 | * Check it at http://www.atik-instruments.com/ | |
| 277 | */ | |
| 09c280a2 RS |
278 | #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ |
| 279 | #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ | |
| 280 | #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ | |
| 281 | #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ | |
| 34910434 | 282 | #define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ |
| c9c7746d | 283 | |
| 1da177e4 LT |
284 | /* |
| 285 | * Protego product ids | |
| 286 | */ | |
| 287 | #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ | |
| 288 | #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ | |
| 289 | #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ | |
| 290 | #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ | |
| 291 | ||
| 292 | /* | |
| 293 | * Gude Analog- und Digitalsysteme GmbH | |
| 294 | */ | |
| 295 | #define FTDI_GUDEADS_E808_PID 0xE808 | |
| 296 | #define FTDI_GUDEADS_E809_PID 0xE809 | |
| 297 | #define FTDI_GUDEADS_E80A_PID 0xE80A | |
| 298 | #define FTDI_GUDEADS_E80B_PID 0xE80B | |
| 299 | #define FTDI_GUDEADS_E80C_PID 0xE80C | |
| 300 | #define FTDI_GUDEADS_E80D_PID 0xE80D | |
| 301 | #define FTDI_GUDEADS_E80E_PID 0xE80E | |
| 302 | #define FTDI_GUDEADS_E80F_PID 0xE80F | |
| 303 | #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ | |
| 304 | #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ | |
| 305 | #define FTDI_GUDEADS_E88A_PID 0xE88A | |
| 306 | #define FTDI_GUDEADS_E88B_PID 0xE88B | |
| 307 | #define FTDI_GUDEADS_E88C_PID 0xE88C | |
| 308 | #define FTDI_GUDEADS_E88D_PID 0xE88D | |
| 309 | #define FTDI_GUDEADS_E88E_PID 0xE88E | |
| 310 | #define FTDI_GUDEADS_E88F_PID 0xE88F | |
| 311 | ||
| 312 | /* | |
| 313 | * Linx Technologies product ids | |
| 314 | */ | |
| 315 | #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ | |
| 316 | #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ | |
| 317 | #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ | |
| 318 | #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ | |
| 319 | #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ | |
| 320 | ||
| 321 | /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ | |
| 322 | /* unit for PIC16's/PIC18's */ | |
| ec434e9b JC |
323 | #define FTDI_CCSICDU20_0_PID 0xF9D0 |
| 324 | #define FTDI_CCSICDU40_1_PID 0xF9D1 | |
| 325 | #define FTDI_CCSMACHX_2_PID 0xF9D2 | |
| 1da177e4 LT |
326 | |
| 327 | /* Inside Accesso contactless reader (http://www.insidefr.com) */ | |
| 328 | #define INSIDE_ACCESSO 0xFAD0 | |
| 329 | ||
| 330 | /* | |
| 331 | * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI | |
| 332 | */ | |
| 333 | #define INTREPID_VID 0x093C | |
| 334 | #define INTREPID_VALUECAN_PID 0x0601 | |
| 335 | #define INTREPID_NEOVI_PID 0x0701 | |
| 336 | ||
| 337 | /* | |
| 338 | * Falcom Wireless Communications GmbH | |
| 339 | */ | |
| 340 | #define FALCOM_VID 0x0F94 /* Vendor Id */ | |
| 341 | #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ | |
| e6ac4a40 | 342 | #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ |
| 1da177e4 LT |
343 | |
| 344 | /* | |
| 345 | * SUUNTO product ids | |
| 346 | */ | |
| 347 | #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ | |
| 348 | ||
| ef31fec0 MO |
349 | /* |
| 350 | * TTi (Thurlby Thandar Instruments) | |
| 351 | */ | |
| 352 | #define TTI_VID 0x103E /* Vendor Id */ | |
| 353 | #define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ | |
| 354 | ||
| 1da177e4 LT |
355 | /* |
| 356 | * Definitions for B&B Electronics products. | |
| 357 | */ | |
| 358 | #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ | |
| 359 | #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ | |
| 360 | #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ | |
| 361 | #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ | |
| 362 | ||
| 363 | /* | |
| 364 | * RM Michaelides CANview USB (http://www.rmcan.com) | |
| 6f92872c IA |
365 | * CAN fieldbus interface adapter, added by port GmbH www.port.de) |
| 366 | * Ian Abbott changed the macro names for consistency. | |
| 1da177e4 | 367 | */ |
| 6f92872c | 368 | #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ |
| 1da177e4 LT |
369 | |
| 370 | /* | |
| 371 | * EVER Eco Pro UPS (http://www.ever.com.pl/) | |
| 372 | */ | |
| 373 | ||
| 374 | #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ | |
| 375 | ||
| 6f92872c IA |
376 | /* |
| 377 | * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, | |
| 378 | * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices | |
| 379 | * and I'm not entirely sure which are used by which. | |
| 380 | */ | |
| 6f92872c IA |
381 | #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 |
| 382 | #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 | |
| 383 | ||
| 384 | /* | |
| 385 | * Mobility Electronics products. | |
| 386 | */ | |
| 387 | #define MOBILITY_VID 0x1342 | |
| 388 | #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ | |
| 389 | ||
| 9b1513d9 IA |
390 | /* |
| 391 | * microHAM product IDs (http://www.microham.com). | |
| 34d1a8aa IA |
392 | * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> |
| 393 | * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. | |
| 394 | * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. | |
| 9b1513d9 | 395 | */ |
| 34d1a8aa IA |
396 | #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ |
| 397 | #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ | |
| 9b1513d9 IA |
398 | #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ |
| 399 | #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ | |
| 34d1a8aa IA |
400 | #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ |
| 401 | #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ | |
| 402 | #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ | |
| 403 | #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ | |
| 9b1513d9 | 404 | |
| 6f92872c IA |
405 | /* |
| 406 | * Active Robots product ids. | |
| 407 | */ | |
| 408 | #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ | |
| 409 | ||
| e6ac4a40 IA |
410 | /* |
| 411 | * Xsens Technologies BV products (http://www.xsens.com). | |
| 412 | */ | |
| 413 | #define XSENS_CONVERTER_0_PID 0xD388 | |
| 414 | #define XSENS_CONVERTER_1_PID 0xD389 | |
| 415 | #define XSENS_CONVERTER_2_PID 0xD38A | |
| 416 | #define XSENS_CONVERTER_3_PID 0xD38B | |
| 417 | #define XSENS_CONVERTER_4_PID 0xD38C | |
| 418 | #define XSENS_CONVERTER_5_PID 0xD38D | |
| 419 | #define XSENS_CONVERTER_6_PID 0xD38E | |
| 420 | #define XSENS_CONVERTER_7_PID 0xD38F | |
| 421 | ||
| 740a4282 IA |
422 | /* |
| 423 | * Teratronik product ids. | |
| 96de0e25 | 424 | * Submitted by O. Wölfelschneider. |
| 740a4282 IA |
425 | */ |
| 426 | #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ | |
| 427 | #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ | |
| 428 | ||
| 9b1513d9 IA |
429 | /* |
| 430 | * Evolution Robotics products (http://www.evolution.com/). | |
| 431 | * Submitted by Shawn M. Lavelle. | |
| 432 | */ | |
| 433 | #define EVOLUTION_VID 0xDEEE /* Vendor ID */ | |
| 434 | #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ | |
| c1f8ea7d SH |
435 | #define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ |
| 436 | #define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ | |
| 437 | #define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ | |
| 9b1513d9 | 438 | |
| 207c47e1 TR |
439 | /* Pyramid Computer GmbH */ |
| 440 | #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ | |
| 441 | ||
| effac8be PF |
442 | /* |
| 443 | * Posiflex inc retail equipment (http://www.posiflex.com.tw) | |
| 444 | */ | |
| 445 | #define POSIFLEX_VID 0x0d3a /* Vendor ID */ | |
| 446 | #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ | |
| 447 | ||
| a94b52ac IA |
448 | /* |
| 449 | * Westrex International devices submitted by Cory Lee | |
| 450 | */ | |
| 451 | #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ | |
| 452 | #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ | |
| 453 | ||
| cdd3b156 NB |
454 | /* |
| 455 | * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) | |
| 456 | */ | |
| 457 | #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ | |
| 458 | ||
| 7e1c0b86 IA |
459 | /* |
| 460 | * Eclo (http://www.eclo.pt/) product IDs. | |
| 461 | * PID 0xEA90 submitted by Martin Grill. | |
| 462 | */ | |
| 463 | #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ | |
| 464 | ||
| 62a13db3 FH |
465 | /* |
| 466 | * Papouch products (http://www.papouch.com/) | |
| 467 | * Submitted by Folkert van Heusden | |
| 468 | */ | |
| 469 | ||
| 470 | #define PAPOUCH_VID 0x5050 /* Vendor ID */ | |
| 471 | #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ | |
| 472 | ||
| 20a0f47e IA |
473 | /* |
| 474 | * ACG Identification Technologies GmbH products (http://www.acg.de/). | |
| 475 | * Submitted by anton -at- goto10 -dot- org. | |
| 476 | */ | |
| 477 | #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ | |
| 62a13db3 | 478 | |
| eb79b4fd IA |
479 | /* |
| 480 | * Yost Engineering, Inc. products (www.yostengineering.com). | |
| 481 | * PID 0xE050 submitted by Aaron Prose. | |
| 482 | */ | |
| 483 | #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ | |
| 484 | ||
| 48437486 PS |
485 | /* |
| 486 | * ThorLabs USB motor drivers | |
| 487 | */ | |
| 488 | #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ | |
| 489 | ||
| e1979fef CL |
490 | /* |
| 491 | * Testo products (http://www.testo.com/) | |
| 492 | * Submitted by Colin Leroy | |
| 493 | */ | |
| 494 | #define TESTO_VID 0x128D | |
| 495 | #define TESTO_USB_INTERFACE_PID 0x0001 | |
| 496 | ||
| eaede2cb RS |
497 | /* |
| 498 | * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. | |
| 499 | */ | |
| 500 | #define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ | |
| 501 | ||
| 9978f9e1 IA |
502 | /* |
| 503 | * Tactrix OpenPort (ECU) devices. | |
| 504 | * OpenPort 1.3M submitted by Donour Sizemore. | |
| 505 | * OpenPort 1.3S and 1.3U submitted by Ian Abbott. | |
| 506 | */ | |
| 507 | #define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ | |
| 508 | #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ | |
| 509 | #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ | |
| 510 | ||
| 822c7ef4 MP |
511 | /* |
| 512 | * Telldus Technologies | |
| 513 | */ | |
| 514 | #define TELLDUS_VID 0x1781 /* Vendor ID */ | |
| 515 | #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ | |
| 516 | ||
| 4eaf60e0 TS |
517 | /* |
| 518 | * IBS elektronik product ids | |
| 519 | * Submitted by Thomas Schleusener | |
| 520 | */ | |
| 521 | #define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ | |
| 522 | #define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ | |
| 523 | #define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ | |
| 524 | #define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ | |
| 525 | #define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ | |
| 526 | #define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ | |
| 527 | #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ | |
| 528 | #define FTDI_IBS_PROD_PID 0xff3f /* future device */ | |
| 529 | ||
| 762e92fa NSA |
530 | /* |
| 531 | * MaxStream devices www.maxstream.net | |
| 532 | */ | |
| 533 | #define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ | |
| 534 | ||
| fa91d43b TL |
535 | /* Olimex */ |
| 536 | #define OLIMEX_VID 0x15BA | |
| 537 | #define OLIMEX_ARM_USB_OCD_PID 0x0003 | |
| 538 | ||
| 4bb0ef19 EB |
539 | /* www.elsterelectricity.com Elster Unicom III Optical Probe */ |
| 540 | #define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ | |
| d7fde2d6 PC |
541 | |
| 542 | /* | |
| 543 | * The Mobility Lab (TML) | |
| 544 | * Submitted by Pierre Castella | |
| 545 | */ | |
| 546 | #define TML_VID 0x1B91 /* Vendor ID */ | |
| 547 | #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ | |
| 548 | ||
| 1da177e4 LT |
549 | /* Commands */ |
| 550 | #define FTDI_SIO_RESET 0 /* Reset the port */ | |
| 551 | #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ | |
| 552 | #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ | |
| 553 | #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ | |
| 554 | #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ | |
| 555 | #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */ | |
| 556 | #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ | |
| 557 | #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ | |
| 558 | #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ | |
| 559 | #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ | |
| 560 | ||
| 1da177e4 LT |
561 | |
| 562 | /* | |
| 563 | * BmRequestType: 1100 0000b | |
| 564 | * bRequest: FTDI_E2_READ | |
| 565 | * wValue: 0 | |
| 566 | * wIndex: Address of word to read | |
| 567 | * wLength: 2 | |
| 568 | * Data: Will return a word of data from E2Address | |
| 569 | * | |
| 570 | */ | |
| 571 | ||
| 572 | /* Port Identifier Table */ | |
| 573 | #define PIT_DEFAULT 0 /* SIOA */ | |
| 574 | #define PIT_SIOA 1 /* SIOA */ | |
| 575 | /* The device this driver is tested with one has only one port */ | |
| 576 | #define PIT_SIOB 2 /* SIOB */ | |
| 577 | #define PIT_PARALLEL 3 /* Parallel */ | |
| 578 | ||
| 579 | /* FTDI_SIO_RESET */ | |
| 580 | #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET | |
| 581 | #define FTDI_SIO_RESET_REQUEST_TYPE 0x40 | |
| 582 | #define FTDI_SIO_RESET_SIO 0 | |
| 583 | #define FTDI_SIO_RESET_PURGE_RX 1 | |
| 584 | #define FTDI_SIO_RESET_PURGE_TX 2 | |
| 585 | ||
| 586 | /* | |
| 587 | * BmRequestType: 0100 0000B | |
| 588 | * bRequest: FTDI_SIO_RESET | |
| 589 | * wValue: Control Value | |
| 590 | * 0 = Reset SIO | |
| 591 | * 1 = Purge RX buffer | |
| 592 | * 2 = Purge TX buffer | |
| 593 | * wIndex: Port | |
| 594 | * wLength: 0 | |
| 595 | * Data: None | |
| 596 | * | |
| 597 | * The Reset SIO command has this effect: | |
| 598 | * | |
| 599 | * Sets flow control set to 'none' | |
| 600 | * Event char = $0D | |
| 601 | * Event trigger = disabled | |
| 602 | * Purge RX buffer | |
| 603 | * Purge TX buffer | |
| 604 | * Clear DTR | |
| 605 | * Clear RTS | |
| 606 | * baud and data format not reset | |
| 607 | * | |
| 608 | * The Purge RX and TX buffer commands affect nothing except the buffers | |
| 609 | * | |
| 610 | */ | |
| 611 | ||
| 612 | /* FTDI_SIO_SET_BAUDRATE */ | |
| 613 | #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 | |
| 614 | #define FTDI_SIO_SET_BAUDRATE_REQUEST 3 | |
| 615 | ||
| 616 | /* | |
| 617 | * BmRequestType: 0100 0000B | |
| 618 | * bRequest: FTDI_SIO_SET_BAUDRATE | |
| 619 | * wValue: BaudDivisor value - see below | |
| 620 | * wIndex: Port | |
| 621 | * wLength: 0 | |
| 622 | * Data: None | |
| 623 | * The BaudDivisor values are calculated as follows: | |
| 624 | * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish | |
| 625 | * I knew how to detect old chips to select proper base clock! | |
| 626 | * - BaudDivisor is a fixed point number encoded in a funny way. | |
| 627 | * (--WRONG WAY OF THINKING--) | |
| 628 | * BaudDivisor is a fixed point number encoded with following bit weighs: | |
| 629 | * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values | |
| 630 | * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...). | |
| 631 | * (--THE REALITY--) | |
| 632 | * The both-bits-set has quite different meaning from 0.75 - the chip designers | |
| 633 | * have decided it to mean 0.125 instead of 0.75. | |
| 634 | * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates | |
| 635 | * and Flow Control Consideration for USB to RS232". | |
| 636 | * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should | |
| 637 | * automagically re-encode the resulting value to take fractions into consideration. | |
| 638 | * As all values are integers, some bit twiddling is in order: | |
| 639 | * BaudDivisor = (BaseClock / 16 / BaudRate) | | |
| 640 | * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5 | |
| 641 | * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25 | |
| 642 | * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125 | |
| 643 | * : 0) | |
| 644 | * | |
| 645 | * For the FT232BM, a 17th divisor bit was introduced to encode the multiples | |
| 646 | * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows | |
| 647 | * (the first four codes are the same as for the FT8U232AM, where bit 16 is | |
| 648 | * always 0): | |
| 649 | * 000 - add .000 to divisor | |
| 650 | * 001 - add .500 to divisor | |
| 651 | * 010 - add .250 to divisor | |
| 652 | * 011 - add .125 to divisor | |
| 653 | * 100 - add .375 to divisor | |
| 654 | * 101 - add .625 to divisor | |
| 655 | * 110 - add .750 to divisor | |
| 656 | * 111 - add .875 to divisor | |
| 657 | * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is | |
| 658 | * placed in bit 0 of the urb index. | |
| 659 | * | |
| 660 | * Note that there are a couple of special cases to support the highest baud | |
| 661 | * rates. If the calculated divisor value is 1, this needs to be replaced with | |
| 662 | * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001 | |
| 663 | * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is | |
| 664 | * not supported by the FT8U232AM). | |
| 665 | */ | |
| 666 | ||
| 667 | typedef enum { | |
| 668 | SIO = 1, | |
| 669 | FT8U232AM = 2, | |
| 670 | FT232BM = 3, | |
| 671 | FT2232C = 4, | |
| d8b21606 | 672 | FT232RL = 5, |
| 1da177e4 LT |
673 | } ftdi_chip_type_t; |
| 674 | ||
| 675 | typedef enum { | |
| 676 | ftdi_sio_b300 = 0, | |
| 677 | ftdi_sio_b600 = 1, | |
| 678 | ftdi_sio_b1200 = 2, | |
| 679 | ftdi_sio_b2400 = 3, | |
| 680 | ftdi_sio_b4800 = 4, | |
| 681 | ftdi_sio_b9600 = 5, | |
| 682 | ftdi_sio_b19200 = 6, | |
| 683 | ftdi_sio_b38400 = 7, | |
| 684 | ftdi_sio_b57600 = 8, | |
| 685 | ftdi_sio_b115200 = 9 | |
| 686 | } FTDI_SIO_baudrate_t ; | |
| 687 | ||
| 688 | /* | |
| 689 | * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values | |
| 690 | * are calculated internally. | |
| 691 | */ | |
| 692 | ||
| 693 | #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA | |
| 694 | #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 | |
| 695 | #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 ) | |
| 696 | #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 ) | |
| 697 | #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 ) | |
| 698 | #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 ) | |
| 699 | #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 ) | |
| 700 | #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 ) | |
| 701 | #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 ) | |
| 702 | #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 ) | |
| 703 | #define FTDI_SIO_SET_BREAK (0x1 << 14) | |
| 704 | /* FTDI_SIO_SET_DATA */ | |
| 705 | ||
| 706 | /* | |
| 707 | * BmRequestType: 0100 0000B | |
| 708 | * bRequest: FTDI_SIO_SET_DATA | |
| 709 | * wValue: Data characteristics (see below) | |
| 710 | * wIndex: Port | |
| 711 | * wLength: 0 | |
| 712 | * Data: No | |
| 713 | * | |
| 714 | * Data characteristics | |
| 715 | * | |
| 716 | * B0..7 Number of data bits | |
| 717 | * B8..10 Parity | |
| 718 | * 0 = None | |
| 719 | * 1 = Odd | |
| 720 | * 2 = Even | |
| 721 | * 3 = Mark | |
| 722 | * 4 = Space | |
| 723 | * B11..13 Stop Bits | |
| 724 | * 0 = 1 | |
| 725 | * 1 = 1.5 | |
| 726 | * 2 = 2 | |
| 727 | * B14 | |
| 728 | * 1 = TX ON (break) | |
| 729 | * 0 = TX OFF (normal state) | |
| 730 | * B15 Reserved | |
| 731 | * | |
| 732 | */ | |
| 733 | ||
| 734 | ||
| 735 | ||
| 736 | /* FTDI_SIO_MODEM_CTRL */ | |
| 737 | #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 | |
| 738 | #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL | |
| 739 | ||
| 740 | /* | |
| 741 | * BmRequestType: 0100 0000B | |
| 742 | * bRequest: FTDI_SIO_MODEM_CTRL | |
| 743 | * wValue: ControlValue (see below) | |
| 744 | * wIndex: Port | |
| 745 | * wLength: 0 | |
| 746 | * Data: None | |
| 747 | * | |
| 748 | * NOTE: If the device is in RTS/CTS flow control, the RTS set by this | |
| 749 | * command will be IGNORED without an error being returned | |
| 750 | * Also - you can not set DTR and RTS with one control message | |
| 751 | */ | |
| 752 | ||
| 753 | #define FTDI_SIO_SET_DTR_MASK 0x1 | |
| 754 | #define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK << 8)) | |
| 755 | #define FTDI_SIO_SET_DTR_LOW ( 0 | ( FTDI_SIO_SET_DTR_MASK << 8)) | |
| 756 | #define FTDI_SIO_SET_RTS_MASK 0x2 | |
| 757 | #define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 )) | |
| 758 | #define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 )) | |
| 759 | ||
| 760 | /* | |
| 761 | * ControlValue | |
| 762 | * B0 DTR state | |
| 763 | * 0 = reset | |
| 764 | * 1 = set | |
| 765 | * B1 RTS state | |
| 766 | * 0 = reset | |
| 767 | * 1 = set | |
| 768 | * B2..7 Reserved | |
| 769 | * B8 DTR state enable | |
| 770 | * 0 = ignore | |
| 771 | * 1 = use DTR state | |
| 772 | * B9 RTS state enable | |
| 773 | * 0 = ignore | |
| 774 | * 1 = use RTS state | |
| 775 | * B10..15 Reserved | |
| 776 | */ | |
| 777 | ||
| 778 | /* FTDI_SIO_SET_FLOW_CTRL */ | |
| 779 | #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 | |
| 780 | #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL | |
| 781 | #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 | |
| 782 | #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) | |
| 783 | #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) | |
| 784 | #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) | |
| 785 | /* | |
| 786 | * BmRequestType: 0100 0000b | |
| 787 | * bRequest: FTDI_SIO_SET_FLOW_CTRL | |
| 788 | * wValue: Xoff/Xon | |
| 789 | * wIndex: Protocol/Port - hIndex is protocl / lIndex is port | |
| 790 | * wLength: 0 | |
| 791 | * Data: None | |
| 792 | * | |
| 793 | * hIndex protocol is: | |
| 794 | * B0 Output handshaking using RTS/CTS | |
| 795 | * 0 = disabled | |
| 796 | * 1 = enabled | |
| 797 | * B1 Output handshaking using DTR/DSR | |
| 798 | * 0 = disabled | |
| 799 | * 1 = enabled | |
| 800 | * B2 Xon/Xoff handshaking | |
| 801 | * 0 = disabled | |
| 802 | * 1 = enabled | |
| 803 | * | |
| 804 | * A value of zero in the hIndex field disables handshaking | |
| 805 | * | |
| 806 | * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character | |
| 807 | * and the lValue field contains the XON character. | |
| 808 | */ | |
| 809 | ||
| 810 | /* | |
| 811 | * FTDI_SIO_GET_LATENCY_TIMER | |
| 812 | * | |
| 813 | * Set the timeout interval. The FTDI collects data from the slave | |
| 814 | * device, transmitting it to the host when either A) 62 bytes are | |
| 815 | * received, or B) the timeout interval has elapsed and the buffer | |
| 816 | * contains at least 1 byte. Setting this value to a small number | |
| 817 | * can dramatically improve performance for applications which send | |
| 818 | * small packets, since the default value is 16ms. | |
| 819 | */ | |
| 820 | #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER | |
| 821 | #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 | |
| 822 | ||
| 823 | /* | |
| 824 | * BmRequestType: 1100 0000b | |
| 825 | * bRequest: FTDI_SIO_GET_LATENCY_TIMER | |
| 826 | * wValue: 0 | |
| 827 | * wIndex: Port | |
| 828 | * wLength: 0 | |
| 829 | * Data: latency (on return) | |
| 830 | */ | |
| 831 | ||
| 832 | /* | |
| 833 | * FTDI_SIO_SET_LATENCY_TIMER | |
| 834 | * | |
| 835 | * Set the timeout interval. The FTDI collects data from the slave | |
| 836 | * device, transmitting it to the host when either A) 62 bytes are | |
| 837 | * received, or B) the timeout interval has elapsed and the buffer | |
| 838 | * contains at least 1 byte. Setting this value to a small number | |
| 839 | * can dramatically improve performance for applications which send | |
| 840 | * small packets, since the default value is 16ms. | |
| 841 | */ | |
| 842 | #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER | |
| 843 | #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 | |
| 844 | ||
| 845 | /* | |
| 846 | * BmRequestType: 0100 0000b | |
| 847 | * bRequest: FTDI_SIO_SET_LATENCY_TIMER | |
| 848 | * wValue: Latency (milliseconds) | |
| 849 | * wIndex: Port | |
| 850 | * wLength: 0 | |
| 851 | * Data: None | |
| 852 | * | |
| 853 | * wValue: | |
| 854 | * B0..7 Latency timer | |
| 855 | * B8..15 0 | |
| 856 | * | |
| 857 | */ | |
| 858 | ||
| 859 | /* | |
| 860 | * FTDI_SIO_SET_EVENT_CHAR | |
| 861 | * | |
| 862 | * Set the special event character for the specified communications port. | |
| 863 | * If the device sees this character it will immediately return the | |
| 864 | * data read so far - rather than wait 40ms or until 62 bytes are read | |
| 865 | * which is what normally happens. | |
| 866 | */ | |
| 867 | ||
| 868 | ||
| 869 | #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR | |
| 870 | #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 | |
| 871 | ||
| 872 | ||
| 873 | /* | |
| 874 | * BmRequestType: 0100 0000b | |
| 875 | * bRequest: FTDI_SIO_SET_EVENT_CHAR | |
| 876 | * wValue: EventChar | |
| 877 | * wIndex: Port | |
| 878 | * wLength: 0 | |
| 879 | * Data: None | |
| 880 | * | |
| 881 | * wValue: | |
| 882 | * B0..7 Event Character | |
| 883 | * B8 Event Character Processing | |
| 884 | * 0 = disabled | |
| 885 | * 1 = enabled | |
| 886 | * B9..15 Reserved | |
| 887 | * | |
| 888 | */ | |
| 889 | ||
| 890 | /* FTDI_SIO_SET_ERROR_CHAR */ | |
| 891 | ||
| 892 | /* Set the parity error replacement character for the specified communications port */ | |
| 893 | ||
| 894 | /* | |
| 895 | * BmRequestType: 0100 0000b | |
| 896 | * bRequest: FTDI_SIO_SET_EVENT_CHAR | |
| 897 | * wValue: Error Char | |
| 898 | * wIndex: Port | |
| 899 | * wLength: 0 | |
| 900 | * Data: None | |
| 901 | * | |
| 902 | *Error Char | |
| 903 | * B0..7 Error Character | |
| 904 | * B8 Error Character Processing | |
| 905 | * 0 = disabled | |
| 906 | * 1 = enabled | |
| 907 | * B9..15 Reserved | |
| 908 | * | |
| 909 | */ | |
| 910 | ||
| 911 | /* FTDI_SIO_GET_MODEM_STATUS */ | |
| 4a4efbde | 912 | /* Retrieve the current value of the modem status register */ |
| 1da177e4 LT |
913 | |
| 914 | #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 | |
| 915 | #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS | |
| 916 | #define FTDI_SIO_CTS_MASK 0x10 | |
| 917 | #define FTDI_SIO_DSR_MASK 0x20 | |
| 918 | #define FTDI_SIO_RI_MASK 0x40 | |
| 919 | #define FTDI_SIO_RLSD_MASK 0x80 | |
| 920 | /* | |
| 921 | * BmRequestType: 1100 0000b | |
| 922 | * bRequest: FTDI_SIO_GET_MODEM_STATUS | |
| 923 | * wValue: zero | |
| 924 | * wIndex: Port | |
| 925 | * wLength: 1 | |
| 926 | * Data: Status | |
| 927 | * | |
| 928 | * One byte of data is returned | |
| 929 | * B0..3 0 | |
| 930 | * B4 CTS | |
| 931 | * 0 = inactive | |
| 932 | * 1 = active | |
| 933 | * B5 DSR | |
| 934 | * 0 = inactive | |
| 935 | * 1 = active | |
| 936 | * B6 Ring Indicator (RI) | |
| 937 | * 0 = inactive | |
| 938 | * 1 = active | |
| 939 | * B7 Receive Line Signal Detect (RLSD) | |
| 940 | * 0 = inactive | |
| 941 | * 1 = active | |
| 942 | */ | |
| 943 | ||
| 944 | ||
| 945 | ||
| 946 | /* Descriptors returned by the device | |
| 947 | * | |
| 948 | * Device Descriptor | |
| 949 | * | |
| 950 | * Offset Field Size Value Description | |
| 951 | * 0 bLength 1 0x12 Size of descriptor in bytes | |
| 952 | * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type | |
| 953 | * 2 bcdUSB 2 0x0110 USB Spec Release Number | |
| 954 | * 4 bDeviceClass 1 0x00 Class Code | |
| 955 | * 5 bDeviceSubClass 1 0x00 SubClass Code | |
| 956 | * 6 bDeviceProtocol 1 0x00 Protocol Code | |
| 957 | * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0 | |
| 958 | * 8 idVendor 2 0x0403 Vendor ID | |
| 959 | * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID) | |
| 960 | * 12 bcdDevice 2 0x0001 Device release number | |
| 961 | * 14 iManufacturer 1 0x01 Index of man. string desc | |
| 962 | * 15 iProduct 1 0x02 Index of prod string desc | |
| 963 | * 16 iSerialNumber 1 0x02 Index of serial nmr string desc | |
| 964 | * 17 bNumConfigurations 1 0x01 Number of possible configurations | |
| 965 | * | |
| 966 | * Configuration Descriptor | |
| 967 | * | |
| 968 | * Offset Field Size Value | |
| 969 | * 0 bLength 1 0x09 Size of descriptor in bytes | |
| 970 | * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type | |
| 971 | * 2 wTotalLength 2 0x0020 Total length of data | |
| 972 | * 4 bNumInterfaces 1 0x01 Number of interfaces supported | |
| 973 | * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req | |
| 974 | * 6 iConfiguration 1 0x02 Index of config string descriptor | |
| 975 | * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup | |
| 976 | * 8 MaxPower 1 0x1E Max power consumption | |
| 977 | * | |
| 978 | * Interface Descriptor | |
| 979 | * | |
| 980 | * Offset Field Size Value | |
| 981 | * 0 bLength 1 0x09 Size of descriptor in bytes | |
| 982 | * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type | |
| 983 | * 2 bInterfaceNumber 1 0x00 Number of interface | |
| 984 | * 3 bAlternateSetting 1 0x00 Value used to select alternate | |
| 985 | * 4 bNumEndpoints 1 0x02 Number of endpoints | |
| 986 | * 5 bInterfaceClass 1 0xFF Class Code | |
| 987 | * 6 bInterfaceSubClass 1 0xFF Subclass Code | |
| 988 | * 7 bInterfaceProtocol 1 0xFF Protocol Code | |
| 989 | * 8 iInterface 1 0x02 Index of interface string description | |
| 990 | * | |
| 991 | * IN Endpoint Descriptor | |
| 992 | * | |
| 993 | * Offset Field Size Value | |
| 994 | * 0 bLength 1 0x07 Size of descriptor in bytes | |
| 995 | * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type | |
| 996 | * 2 bEndpointAddress 1 0x82 Address of endpoint | |
| 997 | * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk | |
| 998 | * 4 bNumEndpoints 2 0x0040 maximum packet size | |
| 999 | * 5 bInterval 1 0x00 Interval for polling endpoint | |
| 1000 | * | |
| 1001 | * OUT Endpoint Descriptor | |
| 1002 | * | |
| 1003 | * Offset Field Size Value | |
| 1004 | * 0 bLength 1 0x07 Size of descriptor in bytes | |
| 1005 | * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type | |
| 1006 | * 2 bEndpointAddress 1 0x02 Address of endpoint | |
| 1007 | * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk | |
| 1008 | * 4 bNumEndpoints 2 0x0040 maximum packet size | |
| 1009 | * 5 bInterval 1 0x00 Interval for polling endpoint | |
| 1010 | * | |
| 1011 | * DATA FORMAT | |
| 1012 | * | |
| 1013 | * IN Endpoint | |
| 1014 | * | |
| 1015 | * The device reserves the first two bytes of data on this endpoint to contain the current | |
| 1016 | * values of the modem and line status registers. In the absence of data, the device | |
| 1017 | * generates a message consisting of these two status bytes every 40 ms | |
| 1018 | * | |
| 1019 | * Byte 0: Modem Status | |
| 1020 | * | |
| 1021 | * Offset Description | |
| 1022 | * B0 Reserved - must be 1 | |
| 1023 | * B1 Reserved - must be 0 | |
| 1024 | * B2 Reserved - must be 0 | |
| 1025 | * B3 Reserved - must be 0 | |
| 1026 | * B4 Clear to Send (CTS) | |
| 1027 | * B5 Data Set Ready (DSR) | |
| 1028 | * B6 Ring Indicator (RI) | |
| 1029 | * B7 Receive Line Signal Detect (RLSD) | |
| 1030 | * | |
| 1031 | * Byte 1: Line Status | |
| 1032 | * | |
| 1033 | * Offset Description | |
| 1034 | * B0 Data Ready (DR) | |
| 1035 | * B1 Overrun Error (OE) | |
| 1036 | * B2 Parity Error (PE) | |
| 1037 | * B3 Framing Error (FE) | |
| 1038 | * B4 Break Interrupt (BI) | |
| 1039 | * B5 Transmitter Holding Register (THRE) | |
| 1040 | * B6 Transmitter Empty (TEMT) | |
| 1041 | * B7 Error in RCVR FIFO | |
| 1042 | * | |
| 1043 | */ | |
| 1044 | #define FTDI_RS0_CTS (1 << 4) | |
| 1045 | #define FTDI_RS0_DSR (1 << 5) | |
| 1046 | #define FTDI_RS0_RI (1 << 6) | |
| 1047 | #define FTDI_RS0_RLSD (1 << 7) | |
| 1048 | ||
| 1049 | #define FTDI_RS_DR 1 | |
| 1050 | #define FTDI_RS_OE (1<<1) | |
| 1051 | #define FTDI_RS_PE (1<<2) | |
| 1052 | #define FTDI_RS_FE (1<<3) | |
| 1053 | #define FTDI_RS_BI (1<<4) | |
| 1054 | #define FTDI_RS_THRE (1<<5) | |
| 1055 | #define FTDI_RS_TEMT (1<<6) | |
| 1056 | #define FTDI_RS_FIFO (1<<7) | |
| 1057 | ||
| 1058 | /* | |
| 1059 | * OUT Endpoint | |
| 1060 | * | |
| 1061 | * This device reserves the first bytes of data on this endpoint contain the length | |
| 1062 | * and port identifier of the message. For the FTDI USB Serial converter the port | |
| 1063 | * identifier is always 1. | |
| 1064 | * | |
| 1065 | * Byte 0: Line Status | |
| 1066 | * | |
| 1067 | * Offset Description | |
| 1068 | * B0 Reserved - must be 1 | |
| 1069 | * B1 Reserved - must be 0 | |
| 1070 | * B2..7 Length of message - (not including Byte 0) | |
| 1071 | * | |
| 1072 | */ | |
| 1073 |