Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
464cbb24 AC |
2 | * Definitions for the FTDI USB Single Port Serial Converter - |
3 | * known as FTDI_SIO (Serial Input/Output application of the chipset) | |
1da177e4 LT |
4 | * |
5 | * The example I have is known as the USC-1000 which is available from | |
6 | * http://www.dse.co.nz - cat no XH4214 It looks similar to this: | |
7 | * http://www.dansdata.com/usbser.htm but I can't be sure There are other | |
8 | * USC-1000s which don't look like my device though so beware! | |
9 | * | |
464cbb24 | 10 | * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, |
1da177e4 LT |
11 | * USB on the other. |
12 | * | |
13 | * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details | |
14 | * of the protocol required to talk to the device and ongoing assistence | |
15 | * during development. | |
16 | * | |
464cbb24 | 17 | * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the |
1da177e4 LT |
18 | * FTDI_SIO implementation. |
19 | * | |
96de0e25 | 20 | * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais |
1da177e4 LT |
21 | * from Rudolf Gugler |
22 | * | |
23 | */ | |
24 | ||
25 | #define FTDI_VID 0x0403 /* Vendor Id */ | |
26 | #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ | |
27 | #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ | |
28 | #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ | |
1da177e4 | 29 | #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ |
d8b21606 | 30 | #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ |
1da177e4 LT |
31 | #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ |
32 | #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ | |
33 | #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ | |
868e440d | 34 | #define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ |
1da177e4 | 35 | |
641adaae | 36 | |
2011e924 JD |
37 | /* www.canusb.com Lawicel CANUSB device */ |
38 | #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ | |
39 | ||
40 | /* AlphaMicro Components AMC-232USB01 device */ | |
41 | #define FTDI_AMC232_PID 0xFF00 /* Product Id */ | |
42 | ||
6e1ab3ed PM |
43 | /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ |
44 | /* the VID is the standard ftdi vid (FTDI_VID) */ | |
45 | #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ | |
46 | #define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ | |
47 | #define FTDI_SCS_DEVICE_2_PID 0xD012 | |
48 | #define FTDI_SCS_DEVICE_3_PID 0xD013 | |
49 | #define FTDI_SCS_DEVICE_4_PID 0xD014 | |
50 | #define FTDI_SCS_DEVICE_5_PID 0xD015 | |
51 | #define FTDI_SCS_DEVICE_6_PID 0xD016 | |
52 | #define FTDI_SCS_DEVICE_7_PID 0xD017 | |
53 | ||
72a9f958 RG |
54 | /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ |
55 | #define FTDI_ACTZWAVE_PID 0xF2D0 | |
56 | ||
57 | ||
96de0e25 | 58 | /* www.starting-point-systems.com µChameleon device */ |
c0f8d561 CM |
59 | #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ |
60 | ||
1da177e4 LT |
61 | /* www.irtrans.de device */ |
62 | #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ | |
63 | ||
641adaae LN |
64 | |
65 | /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ | |
66 | #define FTDI_TTUSB_PID 0xFF20 /* Product Id */ | |
67 | ||
69737dfa LFC |
68 | /* iPlus device */ |
69 | #define FTDI_IPLUS_PID 0xD070 /* Product Id */ | |
d099321b | 70 | #define FTDI_IPLUS2_PID 0xD071 /* Product Id */ |
69737dfa | 71 | |
fad14a0d FS |
72 | /* DMX4ALL DMX Interfaces */ |
73 | #define FTDI_DMX4ALL 0xC850 | |
74 | ||
2adb80e9 GS |
75 | /* OpenDCC (www.opendcc.de) product id */ |
76 | #define FTDI_OPENDCC_PID 0xBFD8 | |
77 | ||
1da177e4 LT |
78 | /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ |
79 | /* they use the ftdi chipset for the USB interface and the vendor id is the same */ | |
80 | #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ | |
81 | #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ | |
82 | #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ | |
83 | #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ | |
84 | #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ | |
85 | #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ | |
86 | #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ | |
87 | #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ | |
88 | ||
89 | /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ | |
90 | /* broadband internet service. The following PID is exhibited by the usb device supplied */ | |
91 | /* (the VID is the standard ftdi vid (FTDI_VID) */ | |
92 | #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ | |
93 | ||
ce40d290 WP |
94 | /* |
95 | * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device | |
96 | * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) | |
97 | * (the VID is the standard ftdi vid (FTDI_VID) */ | |
98 | #define FTDI_PCDJ_DAC2_PID 0xFA88 | |
99 | ||
1da177e4 LT |
100 | /* |
101 | * The following are the values for the Matrix Orbital LCD displays, | |
102 | * which are the FT232BM ( similar to the 8U232AM ) | |
103 | */ | |
104 | #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ | |
105 | #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ | |
106 | #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ | |
107 | #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ | |
108 | #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ | |
109 | #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ | |
110 | #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ | |
111 | ||
20734345 HW |
112 | /* OOCDlink by Joern Kaipf <joernk@web.de> |
113 | * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ | |
114 | #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ | |
115 | ||
546d7eec | 116 | /* |
ebb3770c RM |
117 | * The following are the values for the Matrix Orbital FTDI Range |
118 | * Anything in this range will use an FT232RL. | |
546d7eec | 119 | */ |
ebb3770c RM |
120 | #define MTXORB_VID 0x1B3D |
121 | #define MTXORB_FTDI_RANGE_0100_PID 0x0100 | |
122 | #define MTXORB_FTDI_RANGE_0101_PID 0x0101 | |
123 | #define MTXORB_FTDI_RANGE_0102_PID 0x0102 | |
124 | #define MTXORB_FTDI_RANGE_0103_PID 0x0103 | |
125 | #define MTXORB_FTDI_RANGE_0104_PID 0x0104 | |
126 | #define MTXORB_FTDI_RANGE_0105_PID 0x0105 | |
127 | #define MTXORB_FTDI_RANGE_0106_PID 0x0106 | |
128 | #define MTXORB_FTDI_RANGE_0107_PID 0x0107 | |
129 | #define MTXORB_FTDI_RANGE_0108_PID 0x0108 | |
130 | #define MTXORB_FTDI_RANGE_0109_PID 0x0109 | |
131 | #define MTXORB_FTDI_RANGE_010A_PID 0x010A | |
132 | #define MTXORB_FTDI_RANGE_010B_PID 0x010B | |
133 | #define MTXORB_FTDI_RANGE_010C_PID 0x010C | |
134 | #define MTXORB_FTDI_RANGE_010D_PID 0x010D | |
135 | #define MTXORB_FTDI_RANGE_010E_PID 0x010E | |
136 | #define MTXORB_FTDI_RANGE_010F_PID 0x010F | |
137 | #define MTXORB_FTDI_RANGE_0110_PID 0x0110 | |
138 | #define MTXORB_FTDI_RANGE_0111_PID 0x0111 | |
139 | #define MTXORB_FTDI_RANGE_0112_PID 0x0112 | |
140 | #define MTXORB_FTDI_RANGE_0113_PID 0x0113 | |
141 | #define MTXORB_FTDI_RANGE_0114_PID 0x0114 | |
142 | #define MTXORB_FTDI_RANGE_0115_PID 0x0115 | |
143 | #define MTXORB_FTDI_RANGE_0116_PID 0x0116 | |
144 | #define MTXORB_FTDI_RANGE_0117_PID 0x0117 | |
145 | #define MTXORB_FTDI_RANGE_0118_PID 0x0118 | |
146 | #define MTXORB_FTDI_RANGE_0119_PID 0x0119 | |
147 | #define MTXORB_FTDI_RANGE_011A_PID 0x011A | |
148 | #define MTXORB_FTDI_RANGE_011B_PID 0x011B | |
149 | #define MTXORB_FTDI_RANGE_011C_PID 0x011C | |
150 | #define MTXORB_FTDI_RANGE_011D_PID 0x011D | |
151 | #define MTXORB_FTDI_RANGE_011E_PID 0x011E | |
152 | #define MTXORB_FTDI_RANGE_011F_PID 0x011F | |
153 | #define MTXORB_FTDI_RANGE_0120_PID 0x0120 | |
154 | #define MTXORB_FTDI_RANGE_0121_PID 0x0121 | |
155 | #define MTXORB_FTDI_RANGE_0122_PID 0x0122 | |
156 | #define MTXORB_FTDI_RANGE_0123_PID 0x0123 | |
157 | #define MTXORB_FTDI_RANGE_0124_PID 0x0124 | |
158 | #define MTXORB_FTDI_RANGE_0125_PID 0x0125 | |
159 | #define MTXORB_FTDI_RANGE_0126_PID 0x0126 | |
160 | #define MTXORB_FTDI_RANGE_0127_PID 0x0127 | |
161 | #define MTXORB_FTDI_RANGE_0128_PID 0x0128 | |
162 | #define MTXORB_FTDI_RANGE_0129_PID 0x0129 | |
163 | #define MTXORB_FTDI_RANGE_012A_PID 0x012A | |
164 | #define MTXORB_FTDI_RANGE_012B_PID 0x012B | |
165 | #define MTXORB_FTDI_RANGE_012C_PID 0x012C | |
166 | #define MTXORB_FTDI_RANGE_012D_PID 0x012D | |
167 | #define MTXORB_FTDI_RANGE_012E_PID 0x012E | |
168 | #define MTXORB_FTDI_RANGE_012F_PID 0x012F | |
169 | #define MTXORB_FTDI_RANGE_0130_PID 0x0130 | |
170 | #define MTXORB_FTDI_RANGE_0131_PID 0x0131 | |
171 | #define MTXORB_FTDI_RANGE_0132_PID 0x0132 | |
172 | #define MTXORB_FTDI_RANGE_0133_PID 0x0133 | |
173 | #define MTXORB_FTDI_RANGE_0134_PID 0x0134 | |
174 | #define MTXORB_FTDI_RANGE_0135_PID 0x0135 | |
175 | #define MTXORB_FTDI_RANGE_0136_PID 0x0136 | |
176 | #define MTXORB_FTDI_RANGE_0137_PID 0x0137 | |
177 | #define MTXORB_FTDI_RANGE_0138_PID 0x0138 | |
178 | #define MTXORB_FTDI_RANGE_0139_PID 0x0139 | |
179 | #define MTXORB_FTDI_RANGE_013A_PID 0x013A | |
180 | #define MTXORB_FTDI_RANGE_013B_PID 0x013B | |
181 | #define MTXORB_FTDI_RANGE_013C_PID 0x013C | |
182 | #define MTXORB_FTDI_RANGE_013D_PID 0x013D | |
183 | #define MTXORB_FTDI_RANGE_013E_PID 0x013E | |
184 | #define MTXORB_FTDI_RANGE_013F_PID 0x013F | |
185 | #define MTXORB_FTDI_RANGE_0140_PID 0x0140 | |
186 | #define MTXORB_FTDI_RANGE_0141_PID 0x0141 | |
187 | #define MTXORB_FTDI_RANGE_0142_PID 0x0142 | |
188 | #define MTXORB_FTDI_RANGE_0143_PID 0x0143 | |
189 | #define MTXORB_FTDI_RANGE_0144_PID 0x0144 | |
190 | #define MTXORB_FTDI_RANGE_0145_PID 0x0145 | |
191 | #define MTXORB_FTDI_RANGE_0146_PID 0x0146 | |
192 | #define MTXORB_FTDI_RANGE_0147_PID 0x0147 | |
193 | #define MTXORB_FTDI_RANGE_0148_PID 0x0148 | |
194 | #define MTXORB_FTDI_RANGE_0149_PID 0x0149 | |
195 | #define MTXORB_FTDI_RANGE_014A_PID 0x014A | |
196 | #define MTXORB_FTDI_RANGE_014B_PID 0x014B | |
197 | #define MTXORB_FTDI_RANGE_014C_PID 0x014C | |
198 | #define MTXORB_FTDI_RANGE_014D_PID 0x014D | |
199 | #define MTXORB_FTDI_RANGE_014E_PID 0x014E | |
200 | #define MTXORB_FTDI_RANGE_014F_PID 0x014F | |
201 | #define MTXORB_FTDI_RANGE_0150_PID 0x0150 | |
202 | #define MTXORB_FTDI_RANGE_0151_PID 0x0151 | |
203 | #define MTXORB_FTDI_RANGE_0152_PID 0x0152 | |
204 | #define MTXORB_FTDI_RANGE_0153_PID 0x0153 | |
205 | #define MTXORB_FTDI_RANGE_0154_PID 0x0154 | |
206 | #define MTXORB_FTDI_RANGE_0155_PID 0x0155 | |
207 | #define MTXORB_FTDI_RANGE_0156_PID 0x0156 | |
208 | #define MTXORB_FTDI_RANGE_0157_PID 0x0157 | |
209 | #define MTXORB_FTDI_RANGE_0158_PID 0x0158 | |
210 | #define MTXORB_FTDI_RANGE_0159_PID 0x0159 | |
211 | #define MTXORB_FTDI_RANGE_015A_PID 0x015A | |
212 | #define MTXORB_FTDI_RANGE_015B_PID 0x015B | |
213 | #define MTXORB_FTDI_RANGE_015C_PID 0x015C | |
214 | #define MTXORB_FTDI_RANGE_015D_PID 0x015D | |
215 | #define MTXORB_FTDI_RANGE_015E_PID 0x015E | |
216 | #define MTXORB_FTDI_RANGE_015F_PID 0x015F | |
217 | #define MTXORB_FTDI_RANGE_0160_PID 0x0160 | |
218 | #define MTXORB_FTDI_RANGE_0161_PID 0x0161 | |
219 | #define MTXORB_FTDI_RANGE_0162_PID 0x0162 | |
220 | #define MTXORB_FTDI_RANGE_0163_PID 0x0163 | |
221 | #define MTXORB_FTDI_RANGE_0164_PID 0x0164 | |
222 | #define MTXORB_FTDI_RANGE_0165_PID 0x0165 | |
223 | #define MTXORB_FTDI_RANGE_0166_PID 0x0166 | |
224 | #define MTXORB_FTDI_RANGE_0167_PID 0x0167 | |
225 | #define MTXORB_FTDI_RANGE_0168_PID 0x0168 | |
226 | #define MTXORB_FTDI_RANGE_0169_PID 0x0169 | |
227 | #define MTXORB_FTDI_RANGE_016A_PID 0x016A | |
228 | #define MTXORB_FTDI_RANGE_016B_PID 0x016B | |
229 | #define MTXORB_FTDI_RANGE_016C_PID 0x016C | |
230 | #define MTXORB_FTDI_RANGE_016D_PID 0x016D | |
231 | #define MTXORB_FTDI_RANGE_016E_PID 0x016E | |
232 | #define MTXORB_FTDI_RANGE_016F_PID 0x016F | |
233 | #define MTXORB_FTDI_RANGE_0170_PID 0x0170 | |
234 | #define MTXORB_FTDI_RANGE_0171_PID 0x0171 | |
235 | #define MTXORB_FTDI_RANGE_0172_PID 0x0172 | |
236 | #define MTXORB_FTDI_RANGE_0173_PID 0x0173 | |
237 | #define MTXORB_FTDI_RANGE_0174_PID 0x0174 | |
238 | #define MTXORB_FTDI_RANGE_0175_PID 0x0175 | |
239 | #define MTXORB_FTDI_RANGE_0176_PID 0x0176 | |
240 | #define MTXORB_FTDI_RANGE_0177_PID 0x0177 | |
241 | #define MTXORB_FTDI_RANGE_0178_PID 0x0178 | |
242 | #define MTXORB_FTDI_RANGE_0179_PID 0x0179 | |
243 | #define MTXORB_FTDI_RANGE_017A_PID 0x017A | |
244 | #define MTXORB_FTDI_RANGE_017B_PID 0x017B | |
245 | #define MTXORB_FTDI_RANGE_017C_PID 0x017C | |
246 | #define MTXORB_FTDI_RANGE_017D_PID 0x017D | |
247 | #define MTXORB_FTDI_RANGE_017E_PID 0x017E | |
248 | #define MTXORB_FTDI_RANGE_017F_PID 0x017F | |
249 | #define MTXORB_FTDI_RANGE_0180_PID 0x0180 | |
250 | #define MTXORB_FTDI_RANGE_0181_PID 0x0181 | |
251 | #define MTXORB_FTDI_RANGE_0182_PID 0x0182 | |
252 | #define MTXORB_FTDI_RANGE_0183_PID 0x0183 | |
253 | #define MTXORB_FTDI_RANGE_0184_PID 0x0184 | |
254 | #define MTXORB_FTDI_RANGE_0185_PID 0x0185 | |
255 | #define MTXORB_FTDI_RANGE_0186_PID 0x0186 | |
256 | #define MTXORB_FTDI_RANGE_0187_PID 0x0187 | |
257 | #define MTXORB_FTDI_RANGE_0188_PID 0x0188 | |
258 | #define MTXORB_FTDI_RANGE_0189_PID 0x0189 | |
259 | #define MTXORB_FTDI_RANGE_018A_PID 0x018A | |
260 | #define MTXORB_FTDI_RANGE_018B_PID 0x018B | |
261 | #define MTXORB_FTDI_RANGE_018C_PID 0x018C | |
262 | #define MTXORB_FTDI_RANGE_018D_PID 0x018D | |
263 | #define MTXORB_FTDI_RANGE_018E_PID 0x018E | |
264 | #define MTXORB_FTDI_RANGE_018F_PID 0x018F | |
265 | #define MTXORB_FTDI_RANGE_0190_PID 0x0190 | |
266 | #define MTXORB_FTDI_RANGE_0191_PID 0x0191 | |
267 | #define MTXORB_FTDI_RANGE_0192_PID 0x0192 | |
268 | #define MTXORB_FTDI_RANGE_0193_PID 0x0193 | |
269 | #define MTXORB_FTDI_RANGE_0194_PID 0x0194 | |
270 | #define MTXORB_FTDI_RANGE_0195_PID 0x0195 | |
271 | #define MTXORB_FTDI_RANGE_0196_PID 0x0196 | |
272 | #define MTXORB_FTDI_RANGE_0197_PID 0x0197 | |
273 | #define MTXORB_FTDI_RANGE_0198_PID 0x0198 | |
274 | #define MTXORB_FTDI_RANGE_0199_PID 0x0199 | |
275 | #define MTXORB_FTDI_RANGE_019A_PID 0x019A | |
276 | #define MTXORB_FTDI_RANGE_019B_PID 0x019B | |
277 | #define MTXORB_FTDI_RANGE_019C_PID 0x019C | |
278 | #define MTXORB_FTDI_RANGE_019D_PID 0x019D | |
279 | #define MTXORB_FTDI_RANGE_019E_PID 0x019E | |
280 | #define MTXORB_FTDI_RANGE_019F_PID 0x019F | |
281 | #define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 | |
282 | #define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 | |
283 | #define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 | |
284 | #define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 | |
285 | #define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 | |
286 | #define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 | |
287 | #define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 | |
288 | #define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 | |
289 | #define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 | |
290 | #define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 | |
291 | #define MTXORB_FTDI_RANGE_01AA_PID 0x01AA | |
292 | #define MTXORB_FTDI_RANGE_01AB_PID 0x01AB | |
293 | #define MTXORB_FTDI_RANGE_01AC_PID 0x01AC | |
294 | #define MTXORB_FTDI_RANGE_01AD_PID 0x01AD | |
295 | #define MTXORB_FTDI_RANGE_01AE_PID 0x01AE | |
296 | #define MTXORB_FTDI_RANGE_01AF_PID 0x01AF | |
297 | #define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 | |
298 | #define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 | |
299 | #define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 | |
300 | #define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 | |
301 | #define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 | |
302 | #define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 | |
303 | #define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 | |
304 | #define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 | |
305 | #define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 | |
306 | #define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 | |
307 | #define MTXORB_FTDI_RANGE_01BA_PID 0x01BA | |
308 | #define MTXORB_FTDI_RANGE_01BB_PID 0x01BB | |
309 | #define MTXORB_FTDI_RANGE_01BC_PID 0x01BC | |
310 | #define MTXORB_FTDI_RANGE_01BD_PID 0x01BD | |
311 | #define MTXORB_FTDI_RANGE_01BE_PID 0x01BE | |
312 | #define MTXORB_FTDI_RANGE_01BF_PID 0x01BF | |
313 | #define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 | |
314 | #define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 | |
315 | #define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 | |
316 | #define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 | |
317 | #define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 | |
318 | #define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 | |
319 | #define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 | |
320 | #define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 | |
321 | #define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 | |
322 | #define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 | |
323 | #define MTXORB_FTDI_RANGE_01CA_PID 0x01CA | |
324 | #define MTXORB_FTDI_RANGE_01CB_PID 0x01CB | |
325 | #define MTXORB_FTDI_RANGE_01CC_PID 0x01CC | |
326 | #define MTXORB_FTDI_RANGE_01CD_PID 0x01CD | |
327 | #define MTXORB_FTDI_RANGE_01CE_PID 0x01CE | |
328 | #define MTXORB_FTDI_RANGE_01CF_PID 0x01CF | |
329 | #define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 | |
330 | #define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 | |
331 | #define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 | |
332 | #define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 | |
333 | #define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 | |
334 | #define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 | |
335 | #define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 | |
336 | #define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 | |
337 | #define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 | |
338 | #define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 | |
339 | #define MTXORB_FTDI_RANGE_01DA_PID 0x01DA | |
340 | #define MTXORB_FTDI_RANGE_01DB_PID 0x01DB | |
341 | #define MTXORB_FTDI_RANGE_01DC_PID 0x01DC | |
342 | #define MTXORB_FTDI_RANGE_01DD_PID 0x01DD | |
343 | #define MTXORB_FTDI_RANGE_01DE_PID 0x01DE | |
344 | #define MTXORB_FTDI_RANGE_01DF_PID 0x01DF | |
345 | #define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 | |
346 | #define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 | |
347 | #define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 | |
348 | #define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 | |
349 | #define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 | |
350 | #define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 | |
351 | #define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 | |
352 | #define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 | |
353 | #define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 | |
354 | #define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 | |
355 | #define MTXORB_FTDI_RANGE_01EA_PID 0x01EA | |
356 | #define MTXORB_FTDI_RANGE_01EB_PID 0x01EB | |
357 | #define MTXORB_FTDI_RANGE_01EC_PID 0x01EC | |
358 | #define MTXORB_FTDI_RANGE_01ED_PID 0x01ED | |
359 | #define MTXORB_FTDI_RANGE_01EE_PID 0x01EE | |
360 | #define MTXORB_FTDI_RANGE_01EF_PID 0x01EF | |
361 | #define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 | |
362 | #define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 | |
363 | #define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 | |
364 | #define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 | |
365 | #define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 | |
366 | #define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 | |
367 | #define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 | |
368 | #define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 | |
369 | #define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 | |
370 | #define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 | |
371 | #define MTXORB_FTDI_RANGE_01FA_PID 0x01FA | |
372 | #define MTXORB_FTDI_RANGE_01FB_PID 0x01FB | |
373 | #define MTXORB_FTDI_RANGE_01FC_PID 0x01FC | |
374 | #define MTXORB_FTDI_RANGE_01FD_PID 0x01FD | |
375 | #define MTXORB_FTDI_RANGE_01FE_PID 0x01FE | |
376 | #define MTXORB_FTDI_RANGE_01FF_PID 0x01FF | |
377 | ||
378 | ||
546d7eec | 379 | |
1da177e4 LT |
380 | /* Interbiometrics USB I/O Board */ |
381 | /* Developed for Interbiometrics by Rudolf Gugler */ | |
382 | #define INTERBIOMETRICS_VID 0x1209 | |
383 | #define INTERBIOMETRICS_IOBOARD_PID 0x1002 | |
384 | #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 | |
385 | ||
386 | /* | |
387 | * The following are the values for the Perle Systems | |
388 | * UltraPort USB serial converters | |
389 | */ | |
390 | #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ | |
391 | ||
392 | /* | |
393 | * The following are the values for the Sealevel SeaLINK+ adapters. | |
394 | * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and | |
395 | * removed some PIDs that don't seem to match any existing products.) | |
396 | */ | |
397 | #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ | |
398 | #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ | |
399 | #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ | |
400 | #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ | |
401 | #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ | |
a1484827 | 402 | #define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ |
1da177e4 LT |
403 | #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ |
404 | #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ | |
405 | #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ | |
406 | #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ | |
407 | #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ | |
408 | #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ | |
409 | #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ | |
410 | #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ | |
411 | #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ | |
412 | #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ | |
413 | #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ | |
414 | #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ | |
415 | #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ | |
416 | #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ | |
417 | #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ | |
418 | #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ | |
419 | #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ | |
420 | #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ | |
421 | #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ | |
422 | #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ | |
423 | #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ | |
424 | #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ | |
425 | #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ | |
426 | #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ | |
427 | #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ | |
428 | #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ | |
429 | #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ | |
430 | #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ | |
431 | #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ | |
432 | #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ | |
433 | #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ | |
434 | #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ | |
435 | #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ | |
436 | #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ | |
437 | #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ | |
438 | #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ | |
439 | #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ | |
440 | #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ | |
441 | #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ | |
442 | #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ | |
443 | #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ | |
444 | #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ | |
445 | ||
b4723ae3 IA |
446 | /* |
447 | * The following are the values for two KOBIL chipcard terminals. | |
448 | */ | |
449 | #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ | |
450 | #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ | |
451 | #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ | |
452 | ||
bf58fbd5 MB |
453 | /* |
454 | * Icom ID-1 digital transceiver | |
455 | */ | |
456 | ||
457 | #define ICOM_ID1_VID 0x0C26 | |
458 | #define ICOM_ID1_PID 0x0004 | |
459 | ||
7e0258fd IA |
460 | /* |
461 | * ASK.fr devices | |
462 | */ | |
463 | #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ | |
464 | ||
40c36092 KM |
465 | /* |
466 | * FTDI USB UART chips used in construction projects from the | |
467 | * Elektor Electronics magazine (http://elektor-electronics.co.uk) | |
468 | */ | |
469 | #define ELEKTOR_VID 0x0C7D | |
470 | #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ | |
471 | ||
1da177e4 LT |
472 | /* |
473 | * DSS-20 Sync Station for Sony Ericsson P800 | |
474 | */ | |
464cbb24 | 475 | #define FTDI_DSS20_PID 0xFC82 |
1da177e4 LT |
476 | |
477 | /* | |
478 | * Home Electronics (www.home-electro.com) USB gadgets | |
479 | */ | |
093cf723 | 480 | #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ |
1da177e4 LT |
481 | |
482 | /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ | |
483 | /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ | |
484 | #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ | |
485 | ||
274a4bbc DP |
486 | /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ |
487 | ||
488 | #define FTDI_TNC_X_PID 0xEBE0 | |
489 | ||
e6ac4a40 IA |
490 | /* |
491 | * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). | |
492 | * All of these devices use FTDI's vendor ID (0x0403). | |
493 | * | |
494 | * The previously included PID for the UO 100 module was incorrect. | |
495 | * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). | |
496 | * | |
497 | * Armin Laeuger originally sent the PID for the UM 100 module. | |
498 | */ | |
499 | #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ | |
500 | #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ | |
501 | #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ | |
502 | #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ | |
503 | /* Additional ELV PIDs that default to using the FTDI D2XX drivers on | |
504 | * MS Windows, rather than the FTDI Virtual Com Port drivers. | |
505 | * Maybe these will be easier to use with the libftdi/libusb user-space | |
506 | * drivers, or possibly the Comedi drivers in some cases. */ | |
507 | #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ | |
508 | #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ | |
509 | #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ | |
510 | #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ | |
511 | #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ | |
512 | #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ | |
513 | #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ | |
514 | #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ | |
515 | #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ | |
516 | #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ | |
517 | #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ | |
518 | #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ | |
519 | #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ | |
520 | #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ | |
521 | #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ | |
522 | #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ | |
523 | #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ | |
524 | #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ | |
525 | #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ | |
526 | #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ | |
b5894a50 | 527 | #define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ |
42f8aa94 | 528 | #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ |
a5f62399 | 529 | #define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ |
1da177e4 LT |
530 | |
531 | /* | |
532 | * Definitions for ID TECH (www.idt-net.com) devices | |
533 | */ | |
534 | #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ | |
535 | #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ | |
536 | ||
537 | /* | |
538 | * Definitions for Omnidirectional Control Technology, Inc. devices | |
539 | */ | |
540 | #define OCT_VID 0x0B39 /* OCT vendor ID */ | |
541 | /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ | |
6f92872c IA |
542 | /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ |
543 | /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ | |
1da177e4 LT |
544 | #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ |
545 | ||
546 | /* an infrared receiver for user access control with IR tags */ | |
547 | #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ | |
548 | ||
c9c7746d RS |
549 | /* |
550 | * Definitions for Artemis astronomical USB based cameras | |
551 | * Check it at http://www.artemisccd.co.uk/ | |
552 | */ | |
553 | #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ | |
554 | ||
555 | /* | |
556 | * Definitions for ATIK Instruments astronomical USB based cameras | |
557 | * Check it at http://www.atik-instruments.com/ | |
558 | */ | |
09c280a2 RS |
559 | #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ |
560 | #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ | |
561 | #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ | |
562 | #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ | |
34910434 | 563 | #define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ |
c9c7746d | 564 | |
1da177e4 LT |
565 | /* |
566 | * Protego product ids | |
567 | */ | |
568 | #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ | |
569 | #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ | |
570 | #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ | |
571 | #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ | |
572 | ||
573 | /* | |
574 | * Gude Analog- und Digitalsysteme GmbH | |
575 | */ | |
576 | #define FTDI_GUDEADS_E808_PID 0xE808 | |
577 | #define FTDI_GUDEADS_E809_PID 0xE809 | |
578 | #define FTDI_GUDEADS_E80A_PID 0xE80A | |
579 | #define FTDI_GUDEADS_E80B_PID 0xE80B | |
580 | #define FTDI_GUDEADS_E80C_PID 0xE80C | |
581 | #define FTDI_GUDEADS_E80D_PID 0xE80D | |
582 | #define FTDI_GUDEADS_E80E_PID 0xE80E | |
583 | #define FTDI_GUDEADS_E80F_PID 0xE80F | |
584 | #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ | |
585 | #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ | |
586 | #define FTDI_GUDEADS_E88A_PID 0xE88A | |
587 | #define FTDI_GUDEADS_E88B_PID 0xE88B | |
588 | #define FTDI_GUDEADS_E88C_PID 0xE88C | |
589 | #define FTDI_GUDEADS_E88D_PID 0xE88D | |
590 | #define FTDI_GUDEADS_E88E_PID 0xE88E | |
591 | #define FTDI_GUDEADS_E88F_PID 0xE88F | |
592 | ||
593 | /* | |
594 | * Linx Technologies product ids | |
595 | */ | |
596 | #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ | |
597 | #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ | |
598 | #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ | |
599 | #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ | |
600 | #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ | |
601 | ||
602 | /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ | |
603 | /* unit for PIC16's/PIC18's */ | |
ec434e9b JC |
604 | #define FTDI_CCSICDU20_0_PID 0xF9D0 |
605 | #define FTDI_CCSICDU40_1_PID 0xF9D1 | |
606 | #define FTDI_CCSMACHX_2_PID 0xF9D2 | |
1da177e4 LT |
607 | |
608 | /* Inside Accesso contactless reader (http://www.insidefr.com) */ | |
609 | #define INSIDE_ACCESSO 0xFAD0 | |
610 | ||
611 | /* | |
612 | * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI | |
613 | */ | |
614 | #define INTREPID_VID 0x093C | |
615 | #define INTREPID_VALUECAN_PID 0x0601 | |
616 | #define INTREPID_NEOVI_PID 0x0701 | |
617 | ||
618 | /* | |
619 | * Falcom Wireless Communications GmbH | |
620 | */ | |
621 | #define FALCOM_VID 0x0F94 /* Vendor Id */ | |
622 | #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ | |
e6ac4a40 | 623 | #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ |
1da177e4 LT |
624 | |
625 | /* | |
626 | * SUUNTO product ids | |
627 | */ | |
628 | #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ | |
629 | ||
ef31fec0 MO |
630 | /* |
631 | * TTi (Thurlby Thandar Instruments) | |
632 | */ | |
633 | #define TTI_VID 0x103E /* Vendor Id */ | |
634 | #define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ | |
635 | ||
1da177e4 LT |
636 | /* |
637 | * Definitions for B&B Electronics products. | |
638 | */ | |
639 | #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ | |
640 | #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ | |
641 | #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ | |
642 | #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ | |
643 | ||
644 | /* | |
645 | * RM Michaelides CANview USB (http://www.rmcan.com) | |
6f92872c IA |
646 | * CAN fieldbus interface adapter, added by port GmbH www.port.de) |
647 | * Ian Abbott changed the macro names for consistency. | |
1da177e4 | 648 | */ |
6f92872c | 649 | #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ |
1da177e4 LT |
650 | |
651 | /* | |
652 | * EVER Eco Pro UPS (http://www.ever.com.pl/) | |
653 | */ | |
654 | ||
655 | #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ | |
656 | ||
6f92872c IA |
657 | /* |
658 | * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, | |
659 | * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices | |
660 | * and I'm not entirely sure which are used by which. | |
661 | */ | |
6f92872c IA |
662 | #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 |
663 | #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 | |
664 | ||
665 | /* | |
666 | * Mobility Electronics products. | |
667 | */ | |
668 | #define MOBILITY_VID 0x1342 | |
669 | #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ | |
670 | ||
9b1513d9 IA |
671 | /* |
672 | * microHAM product IDs (http://www.microham.com). | |
34d1a8aa IA |
673 | * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> |
674 | * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. | |
675 | * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. | |
9b1513d9 | 676 | */ |
34d1a8aa IA |
677 | #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ |
678 | #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ | |
9b1513d9 IA |
679 | #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ |
680 | #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ | |
34d1a8aa IA |
681 | #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ |
682 | #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ | |
683 | #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ | |
684 | #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ | |
9b1513d9 | 685 | |
6f92872c IA |
686 | /* |
687 | * Active Robots product ids. | |
688 | */ | |
689 | #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ | |
690 | ||
e6ac4a40 IA |
691 | /* |
692 | * Xsens Technologies BV products (http://www.xsens.com). | |
693 | */ | |
694 | #define XSENS_CONVERTER_0_PID 0xD388 | |
695 | #define XSENS_CONVERTER_1_PID 0xD389 | |
696 | #define XSENS_CONVERTER_2_PID 0xD38A | |
697 | #define XSENS_CONVERTER_3_PID 0xD38B | |
698 | #define XSENS_CONVERTER_4_PID 0xD38C | |
699 | #define XSENS_CONVERTER_5_PID 0xD38D | |
700 | #define XSENS_CONVERTER_6_PID 0xD38E | |
701 | #define XSENS_CONVERTER_7_PID 0xD38F | |
702 | ||
740a4282 IA |
703 | /* |
704 | * Teratronik product ids. | |
96de0e25 | 705 | * Submitted by O. Wölfelschneider. |
740a4282 IA |
706 | */ |
707 | #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ | |
708 | #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ | |
709 | ||
9b1513d9 IA |
710 | /* |
711 | * Evolution Robotics products (http://www.evolution.com/). | |
712 | * Submitted by Shawn M. Lavelle. | |
713 | */ | |
714 | #define EVOLUTION_VID 0xDEEE /* Vendor ID */ | |
715 | #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ | |
c1f8ea7d SH |
716 | #define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ |
717 | #define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ | |
718 | #define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ | |
9b1513d9 | 719 | |
207c47e1 TR |
720 | /* Pyramid Computer GmbH */ |
721 | #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ | |
722 | ||
effac8be PF |
723 | /* |
724 | * Posiflex inc retail equipment (http://www.posiflex.com.tw) | |
725 | */ | |
726 | #define POSIFLEX_VID 0x0d3a /* Vendor ID */ | |
727 | #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ | |
728 | ||
a94b52ac IA |
729 | /* |
730 | * Westrex International devices submitted by Cory Lee | |
731 | */ | |
732 | #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ | |
733 | #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ | |
734 | ||
cdd3b156 NB |
735 | /* |
736 | * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) | |
737 | */ | |
738 | #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ | |
739 | ||
7e1c0b86 IA |
740 | /* |
741 | * Eclo (http://www.eclo.pt/) product IDs. | |
742 | * PID 0xEA90 submitted by Martin Grill. | |
743 | */ | |
744 | #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ | |
745 | ||
62a13db3 FH |
746 | /* |
747 | * Papouch products (http://www.papouch.com/) | |
748 | * Submitted by Folkert van Heusden | |
749 | */ | |
750 | ||
751 | #define PAPOUCH_VID 0x5050 /* Vendor ID */ | |
752 | #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ | |
753 | ||
20a0f47e IA |
754 | /* |
755 | * ACG Identification Technologies GmbH products (http://www.acg.de/). | |
756 | * Submitted by anton -at- goto10 -dot- org. | |
757 | */ | |
758 | #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ | |
62a13db3 | 759 | |
eb79b4fd IA |
760 | /* |
761 | * Yost Engineering, Inc. products (www.yostengineering.com). | |
762 | * PID 0xE050 submitted by Aaron Prose. | |
763 | */ | |
764 | #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ | |
765 | ||
48437486 PS |
766 | /* |
767 | * ThorLabs USB motor drivers | |
768 | */ | |
769 | #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ | |
770 | ||
e1979fef CL |
771 | /* |
772 | * Testo products (http://www.testo.com/) | |
773 | * Submitted by Colin Leroy | |
774 | */ | |
775 | #define TESTO_VID 0x128D | |
776 | #define TESTO_USB_INTERFACE_PID 0x0001 | |
777 | ||
eaede2cb RS |
778 | /* |
779 | * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. | |
780 | */ | |
781 | #define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ | |
782 | ||
9978f9e1 IA |
783 | /* |
784 | * Tactrix OpenPort (ECU) devices. | |
785 | * OpenPort 1.3M submitted by Donour Sizemore. | |
786 | * OpenPort 1.3S and 1.3U submitted by Ian Abbott. | |
787 | */ | |
788 | #define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ | |
789 | #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ | |
790 | #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ | |
791 | ||
822c7ef4 MP |
792 | /* |
793 | * Telldus Technologies | |
794 | */ | |
795 | #define TELLDUS_VID 0x1781 /* Vendor ID */ | |
796 | #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ | |
797 | ||
4eaf60e0 TS |
798 | /* |
799 | * IBS elektronik product ids | |
800 | * Submitted by Thomas Schleusener | |
801 | */ | |
802 | #define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ | |
803 | #define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ | |
804 | #define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ | |
805 | #define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ | |
806 | #define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ | |
807 | #define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ | |
808 | #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ | |
809 | #define FTDI_IBS_PROD_PID 0xff3f /* future device */ | |
810 | ||
762e92fa NSA |
811 | /* |
812 | * MaxStream devices www.maxstream.net | |
813 | */ | |
814 | #define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ | |
815 | ||
fa91d43b TL |
816 | /* Olimex */ |
817 | #define OLIMEX_VID 0x15BA | |
818 | #define OLIMEX_ARM_USB_OCD_PID 0x0003 | |
819 | ||
a00c3cad FK |
820 | /* Luminary Micro Stellaris Boards, VID = FTDI_VID */ |
821 | /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ | |
822 | #define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 | |
823 | #define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 | |
824 | ||
4bb0ef19 EB |
825 | /* www.elsterelectricity.com Elster Unicom III Optical Probe */ |
826 | #define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ | |
d7fde2d6 PC |
827 | |
828 | /* | |
829 | * The Mobility Lab (TML) | |
830 | * Submitted by Pierre Castella | |
831 | */ | |
832 | #define TML_VID 0x1B91 /* Vendor ID */ | |
833 | #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ | |
834 | ||
11171d1b MB |
835 | /* Propox devices */ |
836 | #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 | |
837 | ||
2542335c JH |
838 | /* Rig Expert Ukraine devices */ |
839 | #define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ | |
840 | ||
1da177e4 LT |
841 | /* Commands */ |
842 | #define FTDI_SIO_RESET 0 /* Reset the port */ | |
843 | #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ | |
844 | #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ | |
845 | #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ | |
846 | #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ | |
847 | #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */ | |
848 | #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ | |
849 | #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ | |
850 | #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ | |
851 | #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ | |
852 | ||
1da177e4 | 853 | |
20734345 HW |
854 | /* |
855 | * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 | |
856 | * Submitted by Harald Welte <laforge@openmoko.org> | |
857 | */ | |
858 | #define FIC_VID 0x1457 | |
859 | #define FIC_NEO1973_DEBUG_PID 0x5118 | |
860 | ||
26ab7053 AN |
861 | /* |
862 | * RATOC REX-USB60F | |
863 | */ | |
864 | #define RATOC_VENDOR_ID 0x0584 | |
865 | #define RATOC_PRODUCT_ID_USB60F 0xb020 | |
866 | ||
1da177e4 LT |
867 | /* |
868 | * BmRequestType: 1100 0000b | |
869 | * bRequest: FTDI_E2_READ | |
870 | * wValue: 0 | |
871 | * wIndex: Address of word to read | |
872 | * wLength: 2 | |
873 | * Data: Will return a word of data from E2Address | |
874 | * | |
875 | */ | |
876 | ||
877 | /* Port Identifier Table */ | |
878 | #define PIT_DEFAULT 0 /* SIOA */ | |
879 | #define PIT_SIOA 1 /* SIOA */ | |
880 | /* The device this driver is tested with one has only one port */ | |
881 | #define PIT_SIOB 2 /* SIOB */ | |
882 | #define PIT_PARALLEL 3 /* Parallel */ | |
883 | ||
884 | /* FTDI_SIO_RESET */ | |
885 | #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET | |
886 | #define FTDI_SIO_RESET_REQUEST_TYPE 0x40 | |
887 | #define FTDI_SIO_RESET_SIO 0 | |
888 | #define FTDI_SIO_RESET_PURGE_RX 1 | |
889 | #define FTDI_SIO_RESET_PURGE_TX 2 | |
890 | ||
891 | /* | |
892 | * BmRequestType: 0100 0000B | |
893 | * bRequest: FTDI_SIO_RESET | |
464cbb24 | 894 | * wValue: Control Value |
1da177e4 LT |
895 | * 0 = Reset SIO |
896 | * 1 = Purge RX buffer | |
897 | * 2 = Purge TX buffer | |
898 | * wIndex: Port | |
899 | * wLength: 0 | |
900 | * Data: None | |
901 | * | |
902 | * The Reset SIO command has this effect: | |
903 | * | |
904 | * Sets flow control set to 'none' | |
905 | * Event char = $0D | |
906 | * Event trigger = disabled | |
907 | * Purge RX buffer | |
908 | * Purge TX buffer | |
909 | * Clear DTR | |
910 | * Clear RTS | |
911 | * baud and data format not reset | |
912 | * | |
913 | * The Purge RX and TX buffer commands affect nothing except the buffers | |
914 | * | |
915 | */ | |
916 | ||
917 | /* FTDI_SIO_SET_BAUDRATE */ | |
918 | #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 | |
919 | #define FTDI_SIO_SET_BAUDRATE_REQUEST 3 | |
920 | ||
921 | /* | |
922 | * BmRequestType: 0100 0000B | |
923 | * bRequest: FTDI_SIO_SET_BAUDRATE | |
924 | * wValue: BaudDivisor value - see below | |
925 | * wIndex: Port | |
926 | * wLength: 0 | |
927 | * Data: None | |
928 | * The BaudDivisor values are calculated as follows: | |
929 | * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish | |
930 | * I knew how to detect old chips to select proper base clock! | |
931 | * - BaudDivisor is a fixed point number encoded in a funny way. | |
932 | * (--WRONG WAY OF THINKING--) | |
933 | * BaudDivisor is a fixed point number encoded with following bit weighs: | |
934 | * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values | |
935 | * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...). | |
936 | * (--THE REALITY--) | |
937 | * The both-bits-set has quite different meaning from 0.75 - the chip designers | |
938 | * have decided it to mean 0.125 instead of 0.75. | |
939 | * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates | |
940 | * and Flow Control Consideration for USB to RS232". | |
941 | * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should | |
942 | * automagically re-encode the resulting value to take fractions into consideration. | |
943 | * As all values are integers, some bit twiddling is in order: | |
944 | * BaudDivisor = (BaseClock / 16 / BaudRate) | | |
945 | * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5 | |
946 | * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25 | |
947 | * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125 | |
948 | * : 0) | |
949 | * | |
950 | * For the FT232BM, a 17th divisor bit was introduced to encode the multiples | |
951 | * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows | |
952 | * (the first four codes are the same as for the FT8U232AM, where bit 16 is | |
953 | * always 0): | |
954 | * 000 - add .000 to divisor | |
955 | * 001 - add .500 to divisor | |
956 | * 010 - add .250 to divisor | |
957 | * 011 - add .125 to divisor | |
958 | * 100 - add .375 to divisor | |
959 | * 101 - add .625 to divisor | |
960 | * 110 - add .750 to divisor | |
961 | * 111 - add .875 to divisor | |
464cbb24 | 962 | * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is |
1da177e4 LT |
963 | * placed in bit 0 of the urb index. |
964 | * | |
965 | * Note that there are a couple of special cases to support the highest baud | |
966 | * rates. If the calculated divisor value is 1, this needs to be replaced with | |
967 | * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001 | |
968 | * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is | |
969 | * not supported by the FT8U232AM). | |
970 | */ | |
971 | ||
972 | typedef enum { | |
973 | SIO = 1, | |
974 | FT8U232AM = 2, | |
975 | FT232BM = 3, | |
976 | FT2232C = 4, | |
d8b21606 | 977 | FT232RL = 5, |
1da177e4 LT |
978 | } ftdi_chip_type_t; |
979 | ||
980 | typedef enum { | |
464cbb24 AC |
981 | ftdi_sio_b300 = 0, |
982 | ftdi_sio_b600 = 1, | |
1da177e4 LT |
983 | ftdi_sio_b1200 = 2, |
984 | ftdi_sio_b2400 = 3, | |
985 | ftdi_sio_b4800 = 4, | |
986 | ftdi_sio_b9600 = 5, | |
987 | ftdi_sio_b19200 = 6, | |
988 | ftdi_sio_b38400 = 7, | |
989 | ftdi_sio_b57600 = 8, | |
990 | ftdi_sio_b115200 = 9 | |
464cbb24 | 991 | } FTDI_SIO_baudrate_t; |
1da177e4 LT |
992 | |
993 | /* | |
994 | * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values | |
995 | * are calculated internally. | |
996 | */ | |
997 | ||
998 | #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA | |
999 | #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 | |
464cbb24 AC |
1000 | #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8) |
1001 | #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8) | |
1002 | #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8) | |
1003 | #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8) | |
1004 | #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8) | |
1005 | #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11) | |
1006 | #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11) | |
1007 | #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11) | |
1da177e4 LT |
1008 | #define FTDI_SIO_SET_BREAK (0x1 << 14) |
1009 | /* FTDI_SIO_SET_DATA */ | |
1010 | ||
1011 | /* | |
464cbb24 | 1012 | * BmRequestType: 0100 0000B |
1da177e4 LT |
1013 | * bRequest: FTDI_SIO_SET_DATA |
1014 | * wValue: Data characteristics (see below) | |
1015 | * wIndex: Port | |
1016 | * wLength: 0 | |
1017 | * Data: No | |
1018 | * | |
1019 | * Data characteristics | |
1020 | * | |
1021 | * B0..7 Number of data bits | |
1022 | * B8..10 Parity | |
1023 | * 0 = None | |
1024 | * 1 = Odd | |
1025 | * 2 = Even | |
1026 | * 3 = Mark | |
1027 | * 4 = Space | |
1028 | * B11..13 Stop Bits | |
1029 | * 0 = 1 | |
1030 | * 1 = 1.5 | |
1031 | * 2 = 2 | |
1032 | * B14 | |
1033 | * 1 = TX ON (break) | |
1034 | * 0 = TX OFF (normal state) | |
1035 | * B15 Reserved | |
1036 | * | |
1037 | */ | |
1038 | ||
1039 | ||
1040 | ||
1041 | /* FTDI_SIO_MODEM_CTRL */ | |
1042 | #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 | |
1043 | #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL | |
1044 | ||
464cbb24 | 1045 | /* |
1da177e4 LT |
1046 | * BmRequestType: 0100 0000B |
1047 | * bRequest: FTDI_SIO_MODEM_CTRL | |
1048 | * wValue: ControlValue (see below) | |
1049 | * wIndex: Port | |
1050 | * wLength: 0 | |
1051 | * Data: None | |
1052 | * | |
1053 | * NOTE: If the device is in RTS/CTS flow control, the RTS set by this | |
1054 | * command will be IGNORED without an error being returned | |
1055 | * Also - you can not set DTR and RTS with one control message | |
1056 | */ | |
1057 | ||
1058 | #define FTDI_SIO_SET_DTR_MASK 0x1 | |
464cbb24 AC |
1059 | #define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK << 8)) |
1060 | #define FTDI_SIO_SET_DTR_LOW (0 | (FTDI_SIO_SET_DTR_MASK << 8)) | |
1da177e4 | 1061 | #define FTDI_SIO_SET_RTS_MASK 0x2 |
464cbb24 AC |
1062 | #define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8)) |
1063 | #define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8)) | |
1da177e4 LT |
1064 | |
1065 | /* | |
1066 | * ControlValue | |
1067 | * B0 DTR state | |
1068 | * 0 = reset | |
1069 | * 1 = set | |
1070 | * B1 RTS state | |
1071 | * 0 = reset | |
1072 | * 1 = set | |
1073 | * B2..7 Reserved | |
1074 | * B8 DTR state enable | |
1075 | * 0 = ignore | |
1076 | * 1 = use DTR state | |
1077 | * B9 RTS state enable | |
1078 | * 0 = ignore | |
1079 | * 1 = use RTS state | |
1080 | * B10..15 Reserved | |
1081 | */ | |
1082 | ||
1083 | /* FTDI_SIO_SET_FLOW_CTRL */ | |
1084 | #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 | |
1085 | #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL | |
464cbb24 | 1086 | #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 |
1da177e4 LT |
1087 | #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) |
1088 | #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) | |
1089 | #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) | |
1090 | /* | |
1091 | * BmRequestType: 0100 0000b | |
1092 | * bRequest: FTDI_SIO_SET_FLOW_CTRL | |
1093 | * wValue: Xoff/Xon | |
1094 | * wIndex: Protocol/Port - hIndex is protocl / lIndex is port | |
464cbb24 | 1095 | * wLength: 0 |
1da177e4 LT |
1096 | * Data: None |
1097 | * | |
1098 | * hIndex protocol is: | |
1099 | * B0 Output handshaking using RTS/CTS | |
1100 | * 0 = disabled | |
1101 | * 1 = enabled | |
1102 | * B1 Output handshaking using DTR/DSR | |
1103 | * 0 = disabled | |
1104 | * 1 = enabled | |
1105 | * B2 Xon/Xoff handshaking | |
1106 | * 0 = disabled | |
1107 | * 1 = enabled | |
1108 | * | |
1109 | * A value of zero in the hIndex field disables handshaking | |
1110 | * | |
464cbb24 | 1111 | * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character |
1da177e4 | 1112 | * and the lValue field contains the XON character. |
464cbb24 AC |
1113 | */ |
1114 | ||
1da177e4 LT |
1115 | /* |
1116 | * FTDI_SIO_GET_LATENCY_TIMER | |
1117 | * | |
1118 | * Set the timeout interval. The FTDI collects data from the slave | |
1119 | * device, transmitting it to the host when either A) 62 bytes are | |
1120 | * received, or B) the timeout interval has elapsed and the buffer | |
1121 | * contains at least 1 byte. Setting this value to a small number | |
1122 | * can dramatically improve performance for applications which send | |
1123 | * small packets, since the default value is 16ms. | |
1124 | */ | |
1125 | #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER | |
1126 | #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 | |
1127 | ||
464cbb24 | 1128 | /* |
1da177e4 LT |
1129 | * BmRequestType: 1100 0000b |
1130 | * bRequest: FTDI_SIO_GET_LATENCY_TIMER | |
1131 | * wValue: 0 | |
1132 | * wIndex: Port | |
1133 | * wLength: 0 | |
1134 | * Data: latency (on return) | |
1135 | */ | |
1136 | ||
464cbb24 | 1137 | /* |
1da177e4 LT |
1138 | * FTDI_SIO_SET_LATENCY_TIMER |
1139 | * | |
1140 | * Set the timeout interval. The FTDI collects data from the slave | |
1141 | * device, transmitting it to the host when either A) 62 bytes are | |
1142 | * received, or B) the timeout interval has elapsed and the buffer | |
1143 | * contains at least 1 byte. Setting this value to a small number | |
1144 | * can dramatically improve performance for applications which send | |
1145 | * small packets, since the default value is 16ms. | |
1146 | */ | |
1147 | #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER | |
1148 | #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 | |
1149 | ||
464cbb24 | 1150 | /* |
1da177e4 LT |
1151 | * BmRequestType: 0100 0000b |
1152 | * bRequest: FTDI_SIO_SET_LATENCY_TIMER | |
1153 | * wValue: Latency (milliseconds) | |
1154 | * wIndex: Port | |
1155 | * wLength: 0 | |
1156 | * Data: None | |
1157 | * | |
1158 | * wValue: | |
1159 | * B0..7 Latency timer | |
1160 | * B8..15 0 | |
1161 | * | |
1162 | */ | |
1163 | ||
1164 | /* | |
464cbb24 | 1165 | * FTDI_SIO_SET_EVENT_CHAR |
1da177e4 LT |
1166 | * |
1167 | * Set the special event character for the specified communications port. | |
1168 | * If the device sees this character it will immediately return the | |
1169 | * data read so far - rather than wait 40ms or until 62 bytes are read | |
1170 | * which is what normally happens. | |
1171 | */ | |
1172 | ||
1173 | ||
1174 | #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR | |
1175 | #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 | |
1176 | ||
1177 | ||
464cbb24 | 1178 | /* |
1da177e4 LT |
1179 | * BmRequestType: 0100 0000b |
1180 | * bRequest: FTDI_SIO_SET_EVENT_CHAR | |
1181 | * wValue: EventChar | |
1182 | * wIndex: Port | |
1183 | * wLength: 0 | |
1184 | * Data: None | |
1185 | * | |
1186 | * wValue: | |
1187 | * B0..7 Event Character | |
1188 | * B8 Event Character Processing | |
1189 | * 0 = disabled | |
1190 | * 1 = enabled | |
1191 | * B9..15 Reserved | |
1192 | * | |
1193 | */ | |
464cbb24 | 1194 | |
1da177e4 LT |
1195 | /* FTDI_SIO_SET_ERROR_CHAR */ |
1196 | ||
1197 | /* Set the parity error replacement character for the specified communications port */ | |
1198 | ||
464cbb24 | 1199 | /* |
1da177e4 LT |
1200 | * BmRequestType: 0100 0000b |
1201 | * bRequest: FTDI_SIO_SET_EVENT_CHAR | |
1202 | * wValue: Error Char | |
1203 | * wIndex: Port | |
1204 | * wLength: 0 | |
1205 | * Data: None | |
1206 | * | |
1207 | *Error Char | |
1208 | * B0..7 Error Character | |
1209 | * B8 Error Character Processing | |
1210 | * 0 = disabled | |
1211 | * 1 = enabled | |
1212 | * B9..15 Reserved | |
1213 | * | |
1214 | */ | |
1215 | ||
1216 | /* FTDI_SIO_GET_MODEM_STATUS */ | |
4a4efbde | 1217 | /* Retrieve the current value of the modem status register */ |
1da177e4 LT |
1218 | |
1219 | #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 | |
1220 | #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS | |
1221 | #define FTDI_SIO_CTS_MASK 0x10 | |
1222 | #define FTDI_SIO_DSR_MASK 0x20 | |
1223 | #define FTDI_SIO_RI_MASK 0x40 | |
1224 | #define FTDI_SIO_RLSD_MASK 0x80 | |
464cbb24 | 1225 | /* |
1da177e4 LT |
1226 | * BmRequestType: 1100 0000b |
1227 | * bRequest: FTDI_SIO_GET_MODEM_STATUS | |
1228 | * wValue: zero | |
1229 | * wIndex: Port | |
1230 | * wLength: 1 | |
1231 | * Data: Status | |
464cbb24 AC |
1232 | * |
1233 | * One byte of data is returned | |
1da177e4 LT |
1234 | * B0..3 0 |
1235 | * B4 CTS | |
1236 | * 0 = inactive | |
1237 | * 1 = active | |
1238 | * B5 DSR | |
1239 | * 0 = inactive | |
1240 | * 1 = active | |
1241 | * B6 Ring Indicator (RI) | |
1242 | * 0 = inactive | |
1243 | * 1 = active | |
1244 | * B7 Receive Line Signal Detect (RLSD) | |
1245 | * 0 = inactive | |
464cbb24 | 1246 | * 1 = active |
1da177e4 LT |
1247 | */ |
1248 | ||
1249 | ||
1250 | ||
464cbb24 AC |
1251 | /* Descriptors returned by the device |
1252 | * | |
1da177e4 | 1253 | * Device Descriptor |
464cbb24 | 1254 | * |
1da177e4 LT |
1255 | * Offset Field Size Value Description |
1256 | * 0 bLength 1 0x12 Size of descriptor in bytes | |
1257 | * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type | |
1258 | * 2 bcdUSB 2 0x0110 USB Spec Release Number | |
1259 | * 4 bDeviceClass 1 0x00 Class Code | |
1260 | * 5 bDeviceSubClass 1 0x00 SubClass Code | |
1261 | * 6 bDeviceProtocol 1 0x00 Protocol Code | |
1262 | * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0 | |
1263 | * 8 idVendor 2 0x0403 Vendor ID | |
1264 | * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID) | |
1265 | * 12 bcdDevice 2 0x0001 Device release number | |
1266 | * 14 iManufacturer 1 0x01 Index of man. string desc | |
1267 | * 15 iProduct 1 0x02 Index of prod string desc | |
1268 | * 16 iSerialNumber 1 0x02 Index of serial nmr string desc | |
1269 | * 17 bNumConfigurations 1 0x01 Number of possible configurations | |
464cbb24 | 1270 | * |
1da177e4 | 1271 | * Configuration Descriptor |
464cbb24 | 1272 | * |
1da177e4 LT |
1273 | * Offset Field Size Value |
1274 | * 0 bLength 1 0x09 Size of descriptor in bytes | |
1275 | * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type | |
1276 | * 2 wTotalLength 2 0x0020 Total length of data | |
1277 | * 4 bNumInterfaces 1 0x01 Number of interfaces supported | |
1278 | * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req | |
1279 | * 6 iConfiguration 1 0x02 Index of config string descriptor | |
1280 | * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup | |
1281 | * 8 MaxPower 1 0x1E Max power consumption | |
464cbb24 | 1282 | * |
1da177e4 | 1283 | * Interface Descriptor |
464cbb24 | 1284 | * |
1da177e4 LT |
1285 | * Offset Field Size Value |
1286 | * 0 bLength 1 0x09 Size of descriptor in bytes | |
1287 | * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type | |
1288 | * 2 bInterfaceNumber 1 0x00 Number of interface | |
1289 | * 3 bAlternateSetting 1 0x00 Value used to select alternate | |
1290 | * 4 bNumEndpoints 1 0x02 Number of endpoints | |
1291 | * 5 bInterfaceClass 1 0xFF Class Code | |
1292 | * 6 bInterfaceSubClass 1 0xFF Subclass Code | |
1293 | * 7 bInterfaceProtocol 1 0xFF Protocol Code | |
1294 | * 8 iInterface 1 0x02 Index of interface string description | |
464cbb24 | 1295 | * |
1da177e4 | 1296 | * IN Endpoint Descriptor |
464cbb24 | 1297 | * |
1da177e4 LT |
1298 | * Offset Field Size Value |
1299 | * 0 bLength 1 0x07 Size of descriptor in bytes | |
1300 | * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type | |
1301 | * 2 bEndpointAddress 1 0x82 Address of endpoint | |
1302 | * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk | |
1303 | * 4 bNumEndpoints 2 0x0040 maximum packet size | |
1304 | * 5 bInterval 1 0x00 Interval for polling endpoint | |
464cbb24 | 1305 | * |
1da177e4 | 1306 | * OUT Endpoint Descriptor |
464cbb24 | 1307 | * |
1da177e4 LT |
1308 | * Offset Field Size Value |
1309 | * 0 bLength 1 0x07 Size of descriptor in bytes | |
1310 | * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type | |
1311 | * 2 bEndpointAddress 1 0x02 Address of endpoint | |
1312 | * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk | |
1313 | * 4 bNumEndpoints 2 0x0040 maximum packet size | |
1314 | * 5 bInterval 1 0x00 Interval for polling endpoint | |
464cbb24 | 1315 | * |
1da177e4 | 1316 | * DATA FORMAT |
464cbb24 | 1317 | * |
1da177e4 | 1318 | * IN Endpoint |
464cbb24 | 1319 | * |
1da177e4 LT |
1320 | * The device reserves the first two bytes of data on this endpoint to contain the current |
1321 | * values of the modem and line status registers. In the absence of data, the device | |
1322 | * generates a message consisting of these two status bytes every 40 ms | |
464cbb24 | 1323 | * |
1da177e4 | 1324 | * Byte 0: Modem Status |
464cbb24 | 1325 | * |
1da177e4 LT |
1326 | * Offset Description |
1327 | * B0 Reserved - must be 1 | |
1328 | * B1 Reserved - must be 0 | |
1329 | * B2 Reserved - must be 0 | |
1330 | * B3 Reserved - must be 0 | |
1331 | * B4 Clear to Send (CTS) | |
1332 | * B5 Data Set Ready (DSR) | |
1333 | * B6 Ring Indicator (RI) | |
1334 | * B7 Receive Line Signal Detect (RLSD) | |
464cbb24 | 1335 | * |
1da177e4 | 1336 | * Byte 1: Line Status |
464cbb24 | 1337 | * |
1da177e4 LT |
1338 | * Offset Description |
1339 | * B0 Data Ready (DR) | |
1340 | * B1 Overrun Error (OE) | |
1341 | * B2 Parity Error (PE) | |
1342 | * B3 Framing Error (FE) | |
1343 | * B4 Break Interrupt (BI) | |
1344 | * B5 Transmitter Holding Register (THRE) | |
1345 | * B6 Transmitter Empty (TEMT) | |
1346 | * B7 Error in RCVR FIFO | |
464cbb24 | 1347 | * |
1da177e4 LT |
1348 | */ |
1349 | #define FTDI_RS0_CTS (1 << 4) | |
1350 | #define FTDI_RS0_DSR (1 << 5) | |
1351 | #define FTDI_RS0_RI (1 << 6) | |
1352 | #define FTDI_RS0_RLSD (1 << 7) | |
1353 | ||
1354 | #define FTDI_RS_DR 1 | |
1355 | #define FTDI_RS_OE (1<<1) | |
1356 | #define FTDI_RS_PE (1<<2) | |
1357 | #define FTDI_RS_FE (1<<3) | |
1358 | #define FTDI_RS_BI (1<<4) | |
1359 | #define FTDI_RS_THRE (1<<5) | |
1360 | #define FTDI_RS_TEMT (1<<6) | |
1361 | #define FTDI_RS_FIFO (1<<7) | |
1362 | ||
1363 | /* | |
1364 | * OUT Endpoint | |
464cbb24 | 1365 | * |
1da177e4 LT |
1366 | * This device reserves the first bytes of data on this endpoint contain the length |
1367 | * and port identifier of the message. For the FTDI USB Serial converter the port | |
1368 | * identifier is always 1. | |
464cbb24 | 1369 | * |
1da177e4 | 1370 | * Byte 0: Line Status |
464cbb24 | 1371 | * |
1da177e4 LT |
1372 | * Offset Description |
1373 | * B0 Reserved - must be 1 | |
1374 | * B1 Reserved - must be 0 | |
1375 | * B2..7 Length of message - (not including Byte 0) | |
464cbb24 | 1376 | * |
1da177e4 LT |
1377 | */ |
1378 |