[linux-2.6-block.git] / drivers / usb / serial / cypress_m8.h

#ifndef CYPRESS_M8_H
#define CYPRESS_M8_H

/*
 * definitions and function prototypes used for the cypress USB to Serial
 * controller
 */

/*
 * For sending our feature buffer - controlling serial communication states.
 * Linux HID has no support for serial devices so we do this through the driver
 */
#define HID_REQ_GET_REPORT	0x01
#define HID_REQ_SET_REPORT	0x09

/* List other cypress USB to Serial devices here, and add them to the id_table */

/* DeLorme Earthmate USB - a GPS device */
#define VENDOR_ID_DELORME		0x1163
#define PRODUCT_ID_EARTHMATEUSB		0x0100
#define PRODUCT_ID_EARTHMATEUSB_LT20	0x0200

/* Cypress HID->COM RS232 Adapter */
#define VENDOR_ID_CYPRESS		0x04b4
#define PRODUCT_ID_CYPHIDCOM		0x5500

/* Powercom UPS, chip CY7C63723 */
#define VENDOR_ID_POWERCOM		0x0d9f
#define PRODUCT_ID_UPS			0x0002

/* Nokia CA-42 USB to serial cable */
#define VENDOR_ID_DAZZLE		0x07d0
#define PRODUCT_ID_CA42			0x4101
/* End of device listing */

/* Used for setting / requesting serial line settings */
#define CYPRESS_SET_CONFIG	0x01
#define CYPRESS_GET_CONFIG	0x02

/* Used for throttle control */
#define THROTTLED		0x1
#define ACTUALLY_THROTTLED	0x2

/*
 * chiptypes - used in case firmware differs from the generic form ... offering
 * different baud speeds/etc.
 */
#define CT_EARTHMATE	0x01
#define CT_CYPHIDCOM	0x02
#define CT_CA42V2	0x03
#define CT_GENERIC	0x0F
/* End of chiptype definitions */

/* RS-232 serial data communication protocol definitions */
/* these are sent / read at byte 0 of the input/output hid reports */
/* You can find these values defined in the CY4601 USB to Serial design notes */

#define CONTROL_DTR	0x20	/* data terminal ready - flow control - host to device */
#define UART_DSR	0x20	/* data set ready - flow control - device to host */
#define CONTROL_RTS	0x10	/* request to send - flow control - host to device */
#define UART_CTS	0x10	/* clear to send - flow control - device to host */
#define UART_RI		0x10	/* ring indicator - modem - device to host */
#define UART_CD		0x40	/* carrier detect - modem - device to host */
#define CYP_ERROR	0x08	/* received from input report - device to host */
/* Note - the below has nothing to do with the "feature report" reset */
#define CONTROL_RESET	0x08	/* sent with output report - host to device */

/* End of RS-232 protocol definitions */

#endif /* CYPRESS_M8_H */
Commit	Line	Data
1da177e4 LT	1	#ifndef CYPRESS_M8_H
	2	#define CYPRESS_M8_H
	3
995834eb GKH	4	/*
	5	* definitions and function prototypes used for the cypress USB to Serial
	6	* controller
	7	*/
1da177e4	8
995834eb GKH	9	/*
	10	* For sending our feature buffer - controlling serial communication states.
	11	* Linux HID has no support for serial devices so we do this through the driver
	12	*/
	13	#define HID_REQ_GET_REPORT 0x01
	14	#define HID_REQ_SET_REPORT 0x09
1da177e4 LT	15
	16	/* List other cypress USB to Serial devices here, and add them to the id_table */
	17
	18	/* DeLorme Earthmate USB - a GPS device */
995834eb GKH	19	#define VENDOR_ID_DELORME 0x1163
	20	#define PRODUCT_ID_EARTHMATEUSB 0x0100
	21	#define PRODUCT_ID_EARTHMATEUSB_LT20 0x0200
1da177e4 LT	22
1da177e4 LT	23	/* Cypress HID->COM RS232 Adapter */
995834eb GKH	24	#define VENDOR_ID_CYPRESS 0x04b4
995834eb GKH	25	#define PRODUCT_ID_CYPHIDCOM 0x5500
a5c44e29	26
6f6f06ee	27	/* Powercom UPS, chip CY7C63723 */
995834eb GKH	28	#define VENDOR_ID_POWERCOM 0x0d9f
995834eb GKH	29	#define PRODUCT_ID_UPS 0x0002
6f6f06ee	30
a5c44e29 LM	31	/* Nokia CA-42 USB to serial cable */
	32	#define VENDOR_ID_DAZZLE 0x07d0
	33	#define PRODUCT_ID_CA42 0x4101
1da177e4 LT	34	/* End of device listing */
	35
	36	/* Used for setting / requesting serial line settings */
995834eb GKH	37	#define CYPRESS_SET_CONFIG 0x01
995834eb GKH	38	#define CYPRESS_GET_CONFIG 0x02
1da177e4 LT	39
1da177e4 LT	40	/* Used for throttle control */
995834eb GKH	41	#define THROTTLED 0x1
995834eb GKH	42	#define ACTUALLY_THROTTLED 0x2
1da177e4	43
995834eb GKH	44	/*
	45	* chiptypes - used in case firmware differs from the generic form ... offering
	46	* different baud speeds/etc.
1da177e4	47	*/
1da177e4 LT	48	#define CT_EARTHMATE 0x01
1da177e4 LT	49	#define CT_CYPHIDCOM 0x02
a5c44e29	50	#define CT_CA42V2 0x03
1da177e4 LT	51	#define CT_GENERIC 0x0F
	52	/* End of chiptype definitions */
	53
	54	/* RS-232 serial data communication protocol definitions */
	55	/* these are sent / read at byte 0 of the input/output hid reports */
	56	/* You can find these values defined in the CY4601 USB to Serial design notes */
	57
995834eb	58	#define CONTROL_DTR 0x20 /* data terminal ready - flow control - host to device */
1da177e4	59	#define UART_DSR 0x20 /* data set ready - flow control - device to host */
995834eb	60	#define CONTROL_RTS 0x10 /* request to send - flow control - host to device */
1da177e4	61	#define UART_CTS 0x10 /* clear to send - flow control - device to host */
995834eb	62	#define UART_RI 0x10 /* ring indicator - modem - device to host */
1da177e4	63	#define UART_CD 0x40 /* carrier detect - modem - device to host */
995834eb	64	#define CYP_ERROR 0x08 /* received from input report - device to host */
fd589a8f	65	/* Note - the below has nothing to do with the "feature report" reset */
995834eb	66	#define CONTROL_RESET 0x08 /* sent with output report - host to device */
1da177e4 LT	67
	68	/* End of RS-232 protocol definitions */
	69
	70	#endif /* CYPRESS_M8_H */