Commit | Line | Data |
---|---|---|
5fd54ace | 1 | // SPDX-License-Identifier: GPL-1.0+ |
034d7c13 KM |
2 | /* |
3 | * Renesas USB driver | |
4 | * | |
5 | * Copyright (C) 2011 Renesas Solutions Corp. | |
6 | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
034d7c13 KM |
7 | */ |
8 | #include <linux/io.h> | |
9 | #include <linux/list.h> | |
10 | #include <linux/module.h> | |
11 | #include <linux/platform_device.h> | |
12 | #include <linux/slab.h> | |
13 | #include <linux/usb.h> | |
14 | #include <linux/usb/hcd.h> | |
15 | #include "common.h" | |
16 | ||
17 | /* | |
18 | *** HARDWARE LIMITATION *** | |
19 | * | |
20 | * 1) renesas_usbhs has a limited number of controllable devices. | |
21 | * it can control only 9 devices in generally. | |
22 | * see DEVADDn / DCPMAXP / PIPEMAXP. | |
23 | * | |
24 | * 2) renesas_usbhs pipe number is limited. | |
25 | * the pipe will be re-used for each devices. | |
26 | * so, software should control DATA0/1 sequence of each devices. | |
27 | */ | |
28 | ||
29 | ||
30 | /* | |
31 | * image of mod_host | |
32 | * | |
33 | * +--------+ | |
34 | * | udev 0 | --> it is used when set address | |
35 | * +--------+ | |
36 | * | |
37 | * +--------+ pipes are reused for each uep. | |
38 | * | udev 1 |-+- [uep 0 (dcp) ] --+ pipe will be switched when | |
e5679d07 | 39 | * +--------+ | | other device requested |
034d7c13 KM |
40 | * +- [uep 1 (bulk)] --|---+ +--------------+ |
41 | * | +--------------> | pipe0 (dcp) | | |
e5679d07 KM |
42 | * +- [uep 2 (bulk)] -@ | +--------------+ |
43 | * | | pipe1 (isoc) | | |
44 | * +--------+ | +--------------+ | |
45 | * | udev 2 |-+- [uep 0 (dcp) ] -@ +----------> | pipe2 (bulk) | | |
46 | * +--------+ | +--------------+ | |
47 | * +- [uep 1 (int) ] ----+ +------> | pipe3 (bulk) | | |
48 | * | | +--------------+ | |
49 | * +--------+ +-----|------> | pipe4 (int) | | |
50 | * | udev 3 |-+- [uep 0 (dcp) ] -@ | +--------------+ | |
51 | * +--------+ | | | .... | | |
52 | * +- [uep 1 (bulk)] -@ | | .... | | |
034d7c13 KM |
53 | * | | |
54 | * +- [uep 2 (bulk)]-----------+ | |
e5679d07 KM |
55 | * |
56 | * @ : uep requested free pipe, but all have been used. | |
57 | * now it is waiting for free pipe | |
034d7c13 KM |
58 | */ |
59 | ||
60 | ||
61 | /* | |
62 | * struct | |
63 | */ | |
034d7c13 KM |
64 | struct usbhsh_request { |
65 | struct urb *urb; | |
66 | struct usbhs_pkt pkt; | |
034d7c13 KM |
67 | }; |
68 | ||
69 | struct usbhsh_device { | |
70 | struct usb_device *usbv; | |
71 | struct list_head ep_list_head; /* list of usbhsh_ep */ | |
72 | }; | |
73 | ||
74 | struct usbhsh_ep { | |
e5679d07 | 75 | struct usbhs_pipe *pipe; /* attached pipe */ |
034d7c13 | 76 | struct usbhsh_device *udev; /* attached udev */ |
e4c57ded | 77 | struct usb_host_endpoint *ep; |
034d7c13 | 78 | struct list_head ep_list; /* list to usbhsh_device */ |
7b332e5f | 79 | unsigned int counter; /* pipe attach counter */ |
034d7c13 KM |
80 | }; |
81 | ||
82 | #define USBHSH_DEVICE_MAX 10 /* see DEVADDn / DCPMAXP / PIPEMAXP */ | |
83 | #define USBHSH_PORT_MAX 7 /* see DEVADDn :: HUBPORT */ | |
84 | struct usbhsh_hpriv { | |
85 | struct usbhs_mod mod; | |
86 | struct usbhs_pipe *dcp; | |
87 | ||
88 | struct usbhsh_device udev[USBHSH_DEVICE_MAX]; | |
89 | ||
034d7c13 KM |
90 | u32 port_stat; /* USB_PORT_STAT_xxx */ |
91 | ||
7fccd480 | 92 | struct completion setup_ack_done; |
034d7c13 KM |
93 | }; |
94 | ||
95 | ||
96 | static const char usbhsh_hcd_name[] = "renesas_usbhs host"; | |
97 | ||
98 | /* | |
99 | * macro | |
100 | */ | |
101 | #define usbhsh_priv_to_hpriv(priv) \ | |
102 | container_of(usbhs_mod_get(priv, USBHS_HOST), struct usbhsh_hpriv, mod) | |
103 | ||
034d7c13 | 104 | #define __usbhsh_for_each_udev(start, pos, h, i) \ |
925403f4 KM |
105 | for ((i) = start; \ |
106 | ((i) < USBHSH_DEVICE_MAX) && ((pos) = (h)->udev + (i)); \ | |
107 | (i)++) | |
034d7c13 KM |
108 | |
109 | #define usbhsh_for_each_udev(pos, hpriv, i) \ | |
110 | __usbhsh_for_each_udev(1, pos, hpriv, i) | |
111 | ||
112 | #define usbhsh_for_each_udev_with_dev0(pos, hpriv, i) \ | |
113 | __usbhsh_for_each_udev(0, pos, hpriv, i) | |
114 | ||
115 | #define usbhsh_hcd_to_hpriv(h) (struct usbhsh_hpriv *)((h)->hcd_priv) | |
116 | #define usbhsh_hcd_to_dev(h) ((h)->self.controller) | |
117 | ||
118 | #define usbhsh_hpriv_to_priv(h) ((h)->mod.priv) | |
119 | #define usbhsh_hpriv_to_dcp(h) ((h)->dcp) | |
120 | #define usbhsh_hpriv_to_hcd(h) \ | |
121 | container_of((void *)h, struct usb_hcd, hcd_priv) | |
122 | ||
123 | #define usbhsh_ep_to_uep(u) ((u)->hcpriv) | |
124 | #define usbhsh_uep_to_pipe(u) ((u)->pipe) | |
125 | #define usbhsh_uep_to_udev(u) ((u)->udev) | |
e4c57ded KM |
126 | #define usbhsh_uep_to_ep(u) ((u)->ep) |
127 | ||
034d7c13 KM |
128 | #define usbhsh_urb_to_ureq(u) ((u)->hcpriv) |
129 | #define usbhsh_urb_to_usbv(u) ((u)->dev) | |
130 | ||
131 | #define usbhsh_usbv_to_udev(d) dev_get_drvdata(&(d)->dev) | |
132 | ||
133 | #define usbhsh_udev_to_usbv(h) ((h)->usbv) | |
ab142308 | 134 | #define usbhsh_udev_is_used(h) usbhsh_udev_to_usbv(h) |
034d7c13 | 135 | |
e5679d07 | 136 | #define usbhsh_pipe_to_uep(p) ((p)->mod_private) |
034d7c13 | 137 | |
9c673652 KM |
138 | #define usbhsh_device_parent(d) (usbhsh_usbv_to_udev((d)->usbv->parent)) |
139 | #define usbhsh_device_hubport(d) ((d)->usbv->portnum) | |
034d7c13 KM |
140 | #define usbhsh_device_number(h, d) ((int)((d) - (h)->udev)) |
141 | #define usbhsh_device_nth(h, d) ((h)->udev + d) | |
142 | #define usbhsh_device0(h) usbhsh_device_nth(h, 0) | |
143 | ||
144 | #define usbhsh_port_stat_init(h) ((h)->port_stat = 0) | |
145 | #define usbhsh_port_stat_set(h, s) ((h)->port_stat |= (s)) | |
146 | #define usbhsh_port_stat_clear(h, s) ((h)->port_stat &= ~(s)) | |
147 | #define usbhsh_port_stat_get(h) ((h)->port_stat) | |
148 | ||
25234b46 | 149 | #define usbhsh_pkt_to_ureq(p) \ |
034d7c13 KM |
150 | container_of((void *)p, struct usbhsh_request, pkt) |
151 | ||
152 | /* | |
153 | * req alloc/free | |
154 | */ | |
25234b46 | 155 | static struct usbhsh_request *usbhsh_ureq_alloc(struct usbhsh_hpriv *hpriv, |
034d7c13 KM |
156 | struct urb *urb, |
157 | gfp_t mem_flags) | |
158 | { | |
159 | struct usbhsh_request *ureq; | |
034d7c13 | 160 | |
c5b963f8 | 161 | ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags); |
93b6cb45 | 162 | if (!ureq) |
034d7c13 | 163 | return NULL; |
034d7c13 KM |
164 | |
165 | usbhs_pkt_init(&ureq->pkt); | |
034d7c13 | 166 | ureq->urb = urb; |
fc9d5c79 | 167 | usbhsh_urb_to_ureq(urb) = ureq; |
034d7c13 KM |
168 | |
169 | return ureq; | |
170 | } | |
171 | ||
25234b46 | 172 | static void usbhsh_ureq_free(struct usbhsh_hpriv *hpriv, |
034d7c13 KM |
173 | struct usbhsh_request *ureq) |
174 | { | |
fc9d5c79 | 175 | usbhsh_urb_to_ureq(ureq->urb) = NULL; |
034d7c13 | 176 | ureq->urb = NULL; |
034d7c13 | 177 | |
c5b963f8 | 178 | kfree(ureq); |
034d7c13 | 179 | } |
034d7c13 | 180 | |
b1930da0 KM |
181 | /* |
182 | * status | |
183 | */ | |
184 | static int usbhsh_is_running(struct usbhsh_hpriv *hpriv) | |
185 | { | |
034d7c13 | 186 | /* |
b1930da0 KM |
187 | * we can decide some device is attached or not |
188 | * by checking mod.irq_attch | |
189 | * see | |
190 | * usbhsh_irq_attch() | |
191 | * usbhsh_irq_dtch() | |
034d7c13 | 192 | */ |
b1930da0 | 193 | return (hpriv->mod.irq_attch == NULL); |
034d7c13 KM |
194 | } |
195 | ||
196 | /* | |
e5679d07 | 197 | * pipe control |
034d7c13 | 198 | */ |
3edeee38 KM |
199 | static void usbhsh_endpoint_sequence_save(struct usbhsh_hpriv *hpriv, |
200 | struct urb *urb, | |
201 | struct usbhs_pkt *pkt) | |
034d7c13 | 202 | { |
3edeee38 KM |
203 | int len = urb->actual_length; |
204 | int maxp = usb_endpoint_maxp(&urb->ep->desc); | |
205 | int t = 0; | |
034d7c13 | 206 | |
3edeee38 KM |
207 | /* DCP is out of sequence control */ |
208 | if (usb_pipecontrol(urb->pipe)) | |
209 | return; | |
034d7c13 KM |
210 | |
211 | /* | |
3edeee38 KM |
212 | * renesas_usbhs pipe has a limitation in a number. |
213 | * So, driver should re-use the limited pipe for each device/endpoint. | |
214 | * DATA0/1 sequence should be saved for it. | |
215 | * see [image of mod_host] | |
216 | * [HARDWARE LIMITATION] | |
034d7c13 | 217 | */ |
034d7c13 KM |
218 | |
219 | /* | |
3edeee38 KM |
220 | * next sequence depends on actual_length |
221 | * | |
222 | * ex) actual_length = 1147, maxp = 512 | |
223 | * data0 : 512 | |
224 | * data1 : 512 | |
225 | * data0 : 123 | |
226 | * data1 is the next sequence | |
034d7c13 | 227 | */ |
3edeee38 KM |
228 | t = len / maxp; |
229 | if (len % maxp) | |
230 | t++; | |
231 | if (pkt->zero) | |
232 | t++; | |
233 | t %= 2; | |
234 | ||
235 | if (t) | |
236 | usb_dotoggle(urb->dev, | |
237 | usb_pipeendpoint(urb->pipe), | |
238 | usb_pipeout(urb->pipe)); | |
239 | } | |
240 | ||
e4c57ded KM |
241 | static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv, |
242 | struct urb *urb); | |
e5679d07 KM |
243 | |
244 | static int usbhsh_pipe_attach(struct usbhsh_hpriv *hpriv, | |
245 | struct urb *urb) | |
e4c57ded KM |
246 | { |
247 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); | |
e5679d07 | 248 | struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep); |
e4c57ded | 249 | struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb); |
e5679d07 KM |
250 | struct usbhs_pipe *pipe; |
251 | struct usb_endpoint_descriptor *desc = &urb->ep->desc; | |
e4c57ded | 252 | struct device *dev = usbhs_priv_to_dev(priv); |
e4c57ded | 253 | unsigned long flags; |
e5679d07 KM |
254 | int dir_in_req = !!usb_pipein(urb->pipe); |
255 | int is_dcp = usb_endpoint_xfer_control(desc); | |
256 | int i, dir_in; | |
257 | int ret = -EBUSY; | |
e4c57ded KM |
258 | |
259 | /******************** spin lock ********************/ | |
260 | usbhs_lock(priv, flags); | |
261 | ||
7b332e5f KM |
262 | /* |
263 | * if uep has been attached to pipe, | |
264 | * reuse it | |
265 | */ | |
266 | if (usbhsh_uep_to_pipe(uep)) { | |
267 | ret = 0; | |
e5679d07 | 268 | goto usbhsh_pipe_attach_done; |
034d7c13 KM |
269 | } |
270 | ||
e5679d07 | 271 | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { |
034d7c13 | 272 | |
e5679d07 KM |
273 | /* check pipe type */ |
274 | if (!usbhs_pipe_type_is(pipe, usb_endpoint_type(desc))) | |
275 | continue; | |
034d7c13 | 276 | |
e5679d07 KM |
277 | /* check pipe direction if normal pipe */ |
278 | if (!is_dcp) { | |
e4c57ded KM |
279 | dir_in = !!usbhs_pipe_is_dir_in(pipe); |
280 | if (0 != (dir_in - dir_in_req)) | |
281 | continue; | |
e5679d07 | 282 | } |
034d7c13 | 283 | |
e5679d07 KM |
284 | /* check pipe is free */ |
285 | if (usbhsh_pipe_to_uep(pipe)) | |
286 | continue; | |
034d7c13 | 287 | |
e5679d07 KM |
288 | /* |
289 | * attach pipe to uep | |
290 | * | |
291 | * usbhs_pipe_config_update() should be called after | |
292 | * usbhs_set_device_config() | |
293 | * see | |
294 | * DCPMAXP/PIPEMAXP | |
295 | */ | |
296 | usbhsh_uep_to_pipe(uep) = pipe; | |
297 | usbhsh_pipe_to_uep(pipe) = uep; | |
034d7c13 | 298 | |
e5679d07 KM |
299 | usbhs_pipe_config_update(pipe, |
300 | usbhsh_device_number(hpriv, udev), | |
301 | usb_endpoint_num(desc), | |
302 | usb_endpoint_maxp(desc)); | |
034d7c13 | 303 | |
e5679d07 KM |
304 | dev_dbg(dev, "%s [%d-%d(%s:%s)]\n", __func__, |
305 | usbhsh_device_number(hpriv, udev), | |
306 | usb_endpoint_num(desc), | |
307 | usbhs_pipe_name(pipe), | |
308 | dir_in_req ? "in" : "out"); | |
034d7c13 | 309 | |
e5679d07 KM |
310 | ret = 0; |
311 | break; | |
e4c57ded KM |
312 | } |
313 | ||
e5679d07 | 314 | usbhsh_pipe_attach_done: |
7b332e5f KM |
315 | if (0 == ret) |
316 | uep->counter++; | |
317 | ||
e5679d07 KM |
318 | usbhs_unlock(priv, flags); |
319 | /******************** spin unlock ******************/ | |
e4c57ded | 320 | |
e5679d07 | 321 | return ret; |
034d7c13 KM |
322 | } |
323 | ||
e5679d07 KM |
324 | static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv, |
325 | struct usbhsh_ep *uep) | |
034d7c13 | 326 | { |
e5679d07 KM |
327 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
328 | struct usbhs_pipe *pipe; | |
329 | struct device *dev = usbhs_priv_to_dev(priv); | |
330 | unsigned long flags; | |
034d7c13 | 331 | |
4f053a24 KM |
332 | if (unlikely(!uep)) { |
333 | dev_err(dev, "no uep\n"); | |
334 | return; | |
335 | } | |
336 | ||
e5679d07 KM |
337 | /******************** spin lock ********************/ |
338 | usbhs_lock(priv, flags); | |
034d7c13 | 339 | |
e5679d07 | 340 | pipe = usbhsh_uep_to_pipe(uep); |
034d7c13 | 341 | |
e5679d07 KM |
342 | if (unlikely(!pipe)) { |
343 | dev_err(dev, "uep doens't have pipe\n"); | |
7b332e5f | 344 | } else if (1 == uep->counter--) { /* last user */ |
e5679d07 KM |
345 | struct usb_host_endpoint *ep = usbhsh_uep_to_ep(uep); |
346 | struct usbhsh_device *udev = usbhsh_uep_to_udev(uep); | |
347 | ||
348 | /* detach pipe from uep */ | |
349 | usbhsh_uep_to_pipe(uep) = NULL; | |
350 | usbhsh_pipe_to_uep(pipe) = NULL; | |
351 | ||
352 | dev_dbg(dev, "%s [%d-%d(%s)]\n", __func__, | |
353 | usbhsh_device_number(hpriv, udev), | |
354 | usb_endpoint_num(&ep->desc), | |
355 | usbhs_pipe_name(pipe)); | |
e4c57ded KM |
356 | } |
357 | ||
358 | usbhs_unlock(priv, flags); | |
359 | /******************** spin unlock ******************/ | |
034d7c13 KM |
360 | } |
361 | ||
362 | /* | |
e5679d07 | 363 | * endpoint control |
034d7c13 | 364 | */ |
e5679d07 KM |
365 | static int usbhsh_endpoint_attach(struct usbhsh_hpriv *hpriv, |
366 | struct urb *urb, | |
367 | gfp_t mem_flags) | |
034d7c13 KM |
368 | { |
369 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); | |
e5679d07 KM |
370 | struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb); |
371 | struct usb_host_endpoint *ep = urb->ep; | |
034d7c13 | 372 | struct usbhsh_ep *uep; |
e5679d07 | 373 | struct device *dev = usbhs_priv_to_dev(priv); |
034d7c13 | 374 | struct usb_endpoint_descriptor *desc = &ep->desc; |
e5679d07 | 375 | unsigned long flags; |
73ef635a | 376 | |
034d7c13 | 377 | uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags); |
93b6cb45 | 378 | if (!uep) |
e5679d07 | 379 | return -ENOMEM; |
73ef635a | 380 | |
e5679d07 KM |
381 | /******************** spin lock ********************/ |
382 | usbhs_lock(priv, flags); | |
383 | ||
e4c57ded | 384 | /* |
e5679d07 | 385 | * init endpoint |
e4c57ded | 386 | */ |
7b332e5f | 387 | uep->counter = 0; |
e5679d07 KM |
388 | INIT_LIST_HEAD(&uep->ep_list); |
389 | list_add_tail(&uep->ep_list, &udev->ep_list_head); | |
390 | ||
e4c57ded KM |
391 | usbhsh_uep_to_udev(uep) = udev; |
392 | usbhsh_uep_to_ep(uep) = ep; | |
393 | usbhsh_ep_to_uep(ep) = uep; | |
394 | ||
e5679d07 KM |
395 | usbhs_unlock(priv, flags); |
396 | /******************** spin unlock ******************/ | |
e4c57ded | 397 | |
e5679d07 | 398 | dev_dbg(dev, "%s [%d-%d]\n", __func__, |
e4c57ded | 399 | usbhsh_device_number(hpriv, udev), |
e5679d07 | 400 | usb_endpoint_num(desc)); |
e4c57ded KM |
401 | |
402 | return 0; | |
403 | } | |
404 | ||
405 | static void usbhsh_endpoint_detach(struct usbhsh_hpriv *hpriv, | |
406 | struct usb_host_endpoint *ep) | |
407 | { | |
408 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); | |
409 | struct device *dev = usbhs_priv_to_dev(priv); | |
410 | struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep); | |
e4c57ded KM |
411 | unsigned long flags; |
412 | ||
413 | if (!uep) | |
414 | return; | |
415 | ||
e5679d07 | 416 | dev_dbg(dev, "%s [%d-%d]\n", __func__, |
e4c57ded | 417 | usbhsh_device_number(hpriv, usbhsh_uep_to_udev(uep)), |
e5679d07 KM |
418 | usb_endpoint_num(&ep->desc)); |
419 | ||
420 | if (usbhsh_uep_to_pipe(uep)) | |
421 | usbhsh_pipe_detach(hpriv, uep); | |
e4c57ded KM |
422 | |
423 | /******************** spin lock ********************/ | |
424 | usbhs_lock(priv, flags); | |
425 | ||
e4c57ded KM |
426 | /* remove this endpoint from udev */ |
427 | list_del_init(&uep->ep_list); | |
428 | ||
e4c57ded KM |
429 | usbhsh_uep_to_udev(uep) = NULL; |
430 | usbhsh_uep_to_ep(uep) = NULL; | |
431 | usbhsh_ep_to_uep(ep) = NULL; | |
432 | ||
433 | usbhs_unlock(priv, flags); | |
434 | /******************** spin unlock ******************/ | |
435 | ||
436 | kfree(uep); | |
437 | } | |
438 | ||
439 | static void usbhsh_endpoint_detach_all(struct usbhsh_hpriv *hpriv, | |
440 | struct usbhsh_device *udev) | |
441 | { | |
442 | struct usbhsh_ep *uep, *next; | |
443 | ||
444 | list_for_each_entry_safe(uep, next, &udev->ep_list_head, ep_list) | |
445 | usbhsh_endpoint_detach(hpriv, usbhsh_uep_to_ep(uep)); | |
446 | } | |
447 | ||
034d7c13 KM |
448 | /* |
449 | * device control | |
450 | */ | |
9c673652 KM |
451 | static int usbhsh_connected_to_rhdev(struct usb_hcd *hcd, |
452 | struct usbhsh_device *udev) | |
453 | { | |
454 | struct usb_device *usbv = usbhsh_udev_to_usbv(udev); | |
455 | ||
456 | return hcd->self.root_hub == usbv->parent; | |
457 | } | |
034d7c13 KM |
458 | |
459 | static int usbhsh_device_has_endpoint(struct usbhsh_device *udev) | |
460 | { | |
461 | return !list_empty(&udev->ep_list_head); | |
462 | } | |
463 | ||
c1e4877a KM |
464 | static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv, |
465 | struct urb *urb) | |
466 | { | |
467 | struct usb_device *usbv = usbhsh_urb_to_usbv(urb); | |
468 | struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv); | |
469 | ||
470 | /* usbhsh_device_attach() is still not called */ | |
471 | if (!udev) | |
472 | return NULL; | |
473 | ||
474 | /* if it is device0, return it */ | |
475 | if (0 == usb_pipedevice(urb->pipe)) | |
476 | return usbhsh_device0(hpriv); | |
477 | ||
478 | /* return attached device */ | |
479 | return udev; | |
480 | } | |
481 | ||
7aac8d15 | 482 | static struct usbhsh_device *usbhsh_device_attach(struct usbhsh_hpriv *hpriv, |
034d7c13 KM |
483 | struct urb *urb) |
484 | { | |
485 | struct usbhsh_device *udev = NULL; | |
c1e4877a KM |
486 | struct usbhsh_device *udev0 = usbhsh_device0(hpriv); |
487 | struct usbhsh_device *pos; | |
034d7c13 KM |
488 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); |
489 | struct device *dev = usbhsh_hcd_to_dev(hcd); | |
490 | struct usb_device *usbv = usbhsh_urb_to_usbv(urb); | |
491 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); | |
d399f90d | 492 | unsigned long flags; |
9c673652 | 493 | u16 upphub, hubport; |
034d7c13 KM |
494 | int i; |
495 | ||
c1e4877a KM |
496 | /* |
497 | * This function should be called only while urb is pointing to device0. | |
498 | * It will attach unused usbhsh_device to urb (usbv), | |
499 | * and initialize device0. | |
500 | * You can use usbhsh_device_get() to get "current" udev, | |
501 | * and usbhsh_usbv_to_udev() is for "attached" udev. | |
502 | */ | |
503 | if (0 != usb_pipedevice(urb->pipe)) { | |
504 | dev_err(dev, "%s fail: urb isn't pointing device0\n", __func__); | |
505 | return NULL; | |
73ef635a | 506 | } |
034d7c13 | 507 | |
d399f90d KM |
508 | /******************** spin lock ********************/ |
509 | usbhs_lock(priv, flags); | |
510 | ||
034d7c13 | 511 | /* |
c1e4877a | 512 | * find unused device |
034d7c13 | 513 | */ |
c1e4877a KM |
514 | usbhsh_for_each_udev(pos, hpriv, i) { |
515 | if (usbhsh_udev_is_used(pos)) | |
034d7c13 | 516 | continue; |
c1e4877a KM |
517 | udev = pos; |
518 | break; | |
034d7c13 | 519 | } |
034d7c13 | 520 | |
d399f90d KM |
521 | if (udev) { |
522 | /* | |
523 | * usbhsh_usbv_to_udev() | |
524 | * usbhsh_udev_to_usbv() | |
525 | * will be enable | |
526 | */ | |
527 | dev_set_drvdata(&usbv->dev, udev); | |
528 | udev->usbv = usbv; | |
529 | } | |
73ef635a | 530 | |
d399f90d KM |
531 | usbhs_unlock(priv, flags); |
532 | /******************** spin unlock ******************/ | |
034d7c13 | 533 | |
ab142308 KM |
534 | if (!udev) { |
535 | dev_err(dev, "no free usbhsh_device\n"); | |
536 | return NULL; | |
034d7c13 KM |
537 | } |
538 | ||
e4c57ded | 539 | if (usbhsh_device_has_endpoint(udev)) { |
034d7c13 | 540 | dev_warn(dev, "udev have old endpoint\n"); |
e4c57ded KM |
541 | usbhsh_endpoint_detach_all(hpriv, udev); |
542 | } | |
034d7c13 | 543 | |
e4c57ded | 544 | if (usbhsh_device_has_endpoint(udev0)) { |
c1e4877a | 545 | dev_warn(dev, "udev0 have old endpoint\n"); |
e4c57ded | 546 | usbhsh_endpoint_detach_all(hpriv, udev0); |
034d7c13 | 547 | } |
c1e4877a | 548 | |
034d7c13 | 549 | /* uep will be attached */ |
c1e4877a | 550 | INIT_LIST_HEAD(&udev0->ep_list_head); |
034d7c13 KM |
551 | INIT_LIST_HEAD(&udev->ep_list_head); |
552 | ||
034d7c13 | 553 | /* |
c1e4877a | 554 | * set device0 config |
034d7c13 | 555 | */ |
c1e4877a KM |
556 | usbhs_set_device_config(priv, |
557 | 0, 0, 0, usbv->speed); | |
034d7c13 KM |
558 | |
559 | /* | |
c1e4877a | 560 | * set new device config |
034d7c13 | 561 | */ |
9c673652 KM |
562 | upphub = 0; |
563 | hubport = 0; | |
564 | if (!usbhsh_connected_to_rhdev(hcd, udev)) { | |
565 | /* if udev is not connected to rhdev, it means parent is Hub */ | |
566 | struct usbhsh_device *parent = usbhsh_device_parent(udev); | |
034d7c13 | 567 | |
9c673652 KM |
568 | upphub = usbhsh_device_number(hpriv, parent); |
569 | hubport = usbhsh_device_hubport(udev); | |
034d7c13 | 570 | |
9038a038 | 571 | dev_dbg(dev, "%s connected to Hub [%d:%d](%p)\n", __func__, |
9c673652 KM |
572 | upphub, hubport, parent); |
573 | } | |
034d7c13 | 574 | |
3dd49268 | 575 | usbhs_set_device_config(priv, |
034d7c13 | 576 | usbhsh_device_number(hpriv, udev), |
9c673652 | 577 | upphub, hubport, usbv->speed); |
034d7c13 | 578 | |
034d7c13 KM |
579 | dev_dbg(dev, "%s [%d](%p)\n", __func__, |
580 | usbhsh_device_number(hpriv, udev), udev); | |
581 | ||
582 | return udev; | |
034d7c13 KM |
583 | } |
584 | ||
7aac8d15 | 585 | static void usbhsh_device_detach(struct usbhsh_hpriv *hpriv, |
034d7c13 | 586 | struct usbhsh_device *udev) |
034d7c13 | 587 | { |
034d7c13 | 588 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); |
034d7c13 | 589 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
034d7c13 KM |
590 | struct device *dev = usbhsh_hcd_to_dev(hcd); |
591 | struct usb_device *usbv = usbhsh_udev_to_usbv(udev); | |
d399f90d | 592 | unsigned long flags; |
034d7c13 | 593 | |
034d7c13 KM |
594 | dev_dbg(dev, "%s [%d](%p)\n", __func__, |
595 | usbhsh_device_number(hpriv, udev), udev); | |
034d7c13 | 596 | |
e4c57ded | 597 | if (usbhsh_device_has_endpoint(udev)) { |
034d7c13 | 598 | dev_warn(dev, "udev still have endpoint\n"); |
e4c57ded KM |
599 | usbhsh_endpoint_detach_all(hpriv, udev); |
600 | } | |
034d7c13 | 601 | |
c1e4877a KM |
602 | /* |
603 | * There is nothing to do if it is device0. | |
604 | * see | |
605 | * usbhsh_device_attach() | |
606 | * usbhsh_device_get() | |
607 | */ | |
608 | if (0 == usbhsh_device_number(hpriv, udev)) | |
609 | return; | |
034d7c13 | 610 | |
d399f90d KM |
611 | /******************** spin lock ********************/ |
612 | usbhs_lock(priv, flags); | |
034d7c13 | 613 | |
034d7c13 KM |
614 | /* |
615 | * usbhsh_usbv_to_udev() | |
616 | * usbhsh_udev_to_usbv() | |
617 | * will be disable | |
618 | */ | |
619 | dev_set_drvdata(&usbv->dev, NULL); | |
620 | udev->usbv = NULL; | |
034d7c13 | 621 | |
d399f90d KM |
622 | usbhs_unlock(priv, flags); |
623 | /******************** spin unlock ******************/ | |
034d7c13 KM |
624 | } |
625 | ||
626 | /* | |
627 | * queue push/pop | |
628 | */ | |
629 | static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt) | |
630 | { | |
25234b46 | 631 | struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt); |
034d7c13 KM |
632 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
633 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); | |
634 | struct urb *urb = ureq->urb; | |
635 | struct device *dev = usbhs_priv_to_dev(priv); | |
6d0376f8 | 636 | int status = 0; |
034d7c13 KM |
637 | |
638 | dev_dbg(dev, "%s\n", __func__); | |
639 | ||
640 | if (!urb) { | |
641 | dev_warn(dev, "pkt doesn't have urb\n"); | |
642 | return; | |
643 | } | |
644 | ||
6d0376f8 KM |
645 | if (!usbhsh_is_running(hpriv)) |
646 | status = -ESHUTDOWN; | |
647 | ||
034d7c13 | 648 | urb->actual_length = pkt->actual; |
034d7c13 | 649 | |
3edeee38 | 650 | usbhsh_endpoint_sequence_save(hpriv, urb, pkt); |
e0b64ce6 KM |
651 | usbhsh_ureq_free(hpriv, ureq); |
652 | ||
d9b78f33 | 653 | usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep)); |
034d7c13 KM |
654 | |
655 | usb_hcd_unlink_urb_from_ep(hcd, urb); | |
6d0376f8 | 656 | usb_hcd_giveback_urb(hcd, urb, status); |
034d7c13 KM |
657 | } |
658 | ||
659 | static int usbhsh_queue_push(struct usb_hcd *hcd, | |
ee8a0bf5 KM |
660 | struct urb *urb, |
661 | gfp_t mem_flags) | |
034d7c13 | 662 | { |
ee8a0bf5 | 663 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); |
3eddc9e4 KM |
664 | struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep); |
665 | struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep); | |
034d7c13 | 666 | struct device *dev = usbhsh_hcd_to_dev(hcd); |
ee8a0bf5 | 667 | struct usbhsh_request *ureq; |
034d7c13 | 668 | void *buf; |
3edeee38 | 669 | int len, sequence; |
034d7c13 KM |
670 | |
671 | if (usb_pipeisoc(urb->pipe)) { | |
672 | dev_err(dev, "pipe iso is not supported now\n"); | |
673 | return -EIO; | |
674 | } | |
675 | ||
ee8a0bf5 KM |
676 | /* this ureq will be freed on usbhsh_queue_done() */ |
677 | ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags); | |
678 | if (unlikely(!ureq)) { | |
679 | dev_err(dev, "ureq alloc fail\n"); | |
680 | return -ENOMEM; | |
681 | } | |
ee8a0bf5 | 682 | |
034d7c13 | 683 | if (usb_pipein(urb->pipe)) |
87c2905f | 684 | pipe->handler = &usbhs_fifo_dma_pop_handler; |
034d7c13 | 685 | else |
87c2905f | 686 | pipe->handler = &usbhs_fifo_dma_push_handler; |
034d7c13 KM |
687 | |
688 | buf = (void *)(urb->transfer_buffer + urb->actual_length); | |
689 | len = urb->transfer_buffer_length - urb->actual_length; | |
690 | ||
3edeee38 KM |
691 | sequence = usb_gettoggle(urb->dev, |
692 | usb_pipeendpoint(urb->pipe), | |
693 | usb_pipeout(urb->pipe)); | |
694 | ||
034d7c13 | 695 | dev_dbg(dev, "%s\n", __func__); |
ee8a0bf5 | 696 | usbhs_pkt_push(pipe, &ureq->pkt, usbhsh_queue_done, |
3edeee38 KM |
697 | buf, len, (urb->transfer_flags & URB_ZERO_PACKET), |
698 | sequence); | |
699 | ||
034d7c13 KM |
700 | usbhs_pkt_start(pipe); |
701 | ||
702 | return 0; | |
703 | } | |
704 | ||
2d833faa KM |
705 | static void usbhsh_queue_force_pop(struct usbhs_priv *priv, |
706 | struct usbhs_pipe *pipe) | |
707 | { | |
708 | struct usbhs_pkt *pkt; | |
709 | ||
710 | while (1) { | |
711 | pkt = usbhs_pkt_pop(pipe, NULL); | |
712 | if (!pkt) | |
713 | break; | |
714 | ||
715 | /* | |
716 | * if all packet are gone, usbhsh_endpoint_disable() | |
717 | * will be called. | |
718 | * then, attached device/endpoint/pipe will be detached | |
719 | */ | |
720 | usbhsh_queue_done(priv, pkt); | |
721 | } | |
722 | } | |
723 | ||
724 | static void usbhsh_queue_force_pop_all(struct usbhs_priv *priv) | |
725 | { | |
726 | struct usbhs_pipe *pos; | |
727 | int i; | |
728 | ||
729 | usbhs_for_each_pipe_with_dcp(pos, priv, i) | |
730 | usbhsh_queue_force_pop(priv, pos); | |
731 | } | |
732 | ||
034d7c13 KM |
733 | /* |
734 | * DCP setup stage | |
735 | */ | |
736 | static int usbhsh_is_request_address(struct urb *urb) | |
737 | { | |
25234b46 | 738 | struct usb_ctrlrequest *req; |
034d7c13 | 739 | |
25234b46 | 740 | req = (struct usb_ctrlrequest *)urb->setup_packet; |
034d7c13 | 741 | |
25234b46 KM |
742 | if ((DeviceOutRequest == req->bRequestType << 8) && |
743 | (USB_REQ_SET_ADDRESS == req->bRequest)) | |
034d7c13 KM |
744 | return 1; |
745 | else | |
746 | return 0; | |
747 | } | |
748 | ||
749 | static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv, | |
750 | struct urb *urb, | |
751 | struct usbhs_pipe *pipe) | |
752 | { | |
753 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); | |
754 | struct usb_ctrlrequest req; | |
755 | struct device *dev = usbhs_priv_to_dev(priv); | |
756 | ||
757 | /* | |
758 | * wait setup packet ACK | |
759 | * see | |
760 | * usbhsh_irq_setup_ack() | |
761 | * usbhsh_irq_setup_err() | |
762 | */ | |
7fccd480 | 763 | init_completion(&hpriv->setup_ack_done); |
034d7c13 KM |
764 | |
765 | /* copy original request */ | |
766 | memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest)); | |
767 | ||
768 | /* | |
769 | * renesas_usbhs can not use original usb address. | |
770 | * see HARDWARE LIMITATION. | |
c1e4877a KM |
771 | * modify usb address here to use attached device. |
772 | * see usbhsh_device_attach() | |
034d7c13 KM |
773 | */ |
774 | if (usbhsh_is_request_address(urb)) { | |
c1e4877a KM |
775 | struct usb_device *usbv = usbhsh_urb_to_usbv(urb); |
776 | struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv); | |
777 | ||
778 | /* udev is a attached device */ | |
779 | req.wValue = usbhsh_device_number(hpriv, udev); | |
034d7c13 KM |
780 | dev_dbg(dev, "create new address - %d\n", req.wValue); |
781 | } | |
782 | ||
783 | /* set request */ | |
784 | usbhs_usbreq_set_val(priv, &req); | |
785 | ||
786 | /* | |
787 | * wait setup packet ACK | |
788 | */ | |
7fccd480 | 789 | wait_for_completion(&hpriv->setup_ack_done); |
034d7c13 KM |
790 | |
791 | dev_dbg(dev, "%s done\n", __func__); | |
792 | } | |
793 | ||
794 | /* | |
795 | * DCP data stage | |
796 | */ | |
797 | static void usbhsh_data_stage_packet_done(struct usbhs_priv *priv, | |
798 | struct usbhs_pkt *pkt) | |
799 | { | |
25234b46 | 800 | struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt); |
034d7c13 | 801 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
034d7c13 KM |
802 | |
803 | /* this ureq was connected to urb when usbhsh_urb_enqueue() */ | |
804 | ||
25234b46 | 805 | usbhsh_ureq_free(hpriv, ureq); |
034d7c13 KM |
806 | } |
807 | ||
ee8a0bf5 KM |
808 | static int usbhsh_data_stage_packet_push(struct usbhsh_hpriv *hpriv, |
809 | struct urb *urb, | |
810 | struct usbhs_pipe *pipe, | |
811 | gfp_t mem_flags) | |
812 | ||
034d7c13 KM |
813 | { |
814 | struct usbhsh_request *ureq; | |
034d7c13 | 815 | |
ee8a0bf5 KM |
816 | /* this ureq will be freed on usbhsh_data_stage_packet_done() */ |
817 | ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags); | |
818 | if (unlikely(!ureq)) | |
819 | return -ENOMEM; | |
034d7c13 KM |
820 | |
821 | if (usb_pipein(urb->pipe)) | |
822 | pipe->handler = &usbhs_dcp_data_stage_in_handler; | |
823 | else | |
824 | pipe->handler = &usbhs_dcp_data_stage_out_handler; | |
825 | ||
ee8a0bf5 | 826 | usbhs_pkt_push(pipe, &ureq->pkt, |
034d7c13 KM |
827 | usbhsh_data_stage_packet_done, |
828 | urb->transfer_buffer, | |
829 | urb->transfer_buffer_length, | |
3edeee38 KM |
830 | (urb->transfer_flags & URB_ZERO_PACKET), |
831 | -1); | |
ee8a0bf5 KM |
832 | |
833 | return 0; | |
034d7c13 KM |
834 | } |
835 | ||
836 | /* | |
837 | * DCP status stage | |
838 | */ | |
ee8a0bf5 | 839 | static int usbhsh_status_stage_packet_push(struct usbhsh_hpriv *hpriv, |
034d7c13 | 840 | struct urb *urb, |
ee8a0bf5 KM |
841 | struct usbhs_pipe *pipe, |
842 | gfp_t mem_flags) | |
034d7c13 KM |
843 | { |
844 | struct usbhsh_request *ureq; | |
034d7c13 | 845 | |
ee8a0bf5 KM |
846 | /* This ureq will be freed on usbhsh_queue_done() */ |
847 | ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags); | |
848 | if (unlikely(!ureq)) | |
849 | return -ENOMEM; | |
034d7c13 KM |
850 | |
851 | if (usb_pipein(urb->pipe)) | |
852 | pipe->handler = &usbhs_dcp_status_stage_in_handler; | |
853 | else | |
854 | pipe->handler = &usbhs_dcp_status_stage_out_handler; | |
855 | ||
ee8a0bf5 | 856 | usbhs_pkt_push(pipe, &ureq->pkt, |
034d7c13 KM |
857 | usbhsh_queue_done, |
858 | NULL, | |
859 | urb->transfer_buffer_length, | |
3edeee38 | 860 | 0, -1); |
ee8a0bf5 KM |
861 | |
862 | return 0; | |
034d7c13 KM |
863 | } |
864 | ||
865 | static int usbhsh_dcp_queue_push(struct usb_hcd *hcd, | |
ee8a0bf5 KM |
866 | struct urb *urb, |
867 | gfp_t mflags) | |
034d7c13 | 868 | { |
ee8a0bf5 | 869 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); |
3eddc9e4 KM |
870 | struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep); |
871 | struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep); | |
034d7c13 | 872 | struct device *dev = usbhsh_hcd_to_dev(hcd); |
ee8a0bf5 | 873 | int ret; |
034d7c13 KM |
874 | |
875 | dev_dbg(dev, "%s\n", __func__); | |
876 | ||
877 | /* | |
878 | * setup stage | |
879 | * | |
880 | * usbhsh_send_setup_stage_packet() wait SACK/SIGN | |
881 | */ | |
882 | usbhsh_setup_stage_packet_push(hpriv, urb, pipe); | |
883 | ||
884 | /* | |
885 | * data stage | |
886 | * | |
887 | * It is pushed only when urb has buffer. | |
888 | */ | |
ee8a0bf5 KM |
889 | if (urb->transfer_buffer_length) { |
890 | ret = usbhsh_data_stage_packet_push(hpriv, urb, pipe, mflags); | |
891 | if (ret < 0) { | |
892 | dev_err(dev, "data stage failed\n"); | |
893 | return ret; | |
894 | } | |
895 | } | |
034d7c13 KM |
896 | |
897 | /* | |
898 | * status stage | |
899 | */ | |
ee8a0bf5 KM |
900 | ret = usbhsh_status_stage_packet_push(hpriv, urb, pipe, mflags); |
901 | if (ret < 0) { | |
902 | dev_err(dev, "status stage failed\n"); | |
903 | return ret; | |
904 | } | |
034d7c13 KM |
905 | |
906 | /* | |
907 | * start pushed packets | |
908 | */ | |
909 | usbhs_pkt_start(pipe); | |
910 | ||
911 | return 0; | |
912 | } | |
913 | ||
914 | /* | |
915 | * dma map functions | |
916 | */ | |
c3cdcac7 YS |
917 | static int usbhsh_dma_map_ctrl(struct device *dma_dev, struct usbhs_pkt *pkt, |
918 | int map) | |
034d7c13 | 919 | { |
87c2905f KM |
920 | if (map) { |
921 | struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt); | |
922 | struct urb *urb = ureq->urb; | |
923 | ||
924 | /* it can not use scatter/gather */ | |
925 | if (urb->num_sgs) | |
926 | return -EINVAL; | |
927 | ||
928 | pkt->dma = urb->transfer_dma; | |
929 | if (!pkt->dma) | |
930 | return -EINVAL; | |
931 | } | |
932 | ||
034d7c13 KM |
933 | return 0; |
934 | } | |
935 | ||
936 | /* | |
937 | * for hc_driver | |
938 | */ | |
939 | static int usbhsh_host_start(struct usb_hcd *hcd) | |
940 | { | |
941 | return 0; | |
942 | } | |
943 | ||
944 | static void usbhsh_host_stop(struct usb_hcd *hcd) | |
945 | { | |
946 | } | |
947 | ||
948 | static int usbhsh_urb_enqueue(struct usb_hcd *hcd, | |
949 | struct urb *urb, | |
950 | gfp_t mem_flags) | |
951 | { | |
952 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); | |
953 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); | |
954 | struct device *dev = usbhs_priv_to_dev(priv); | |
034d7c13 | 955 | struct usb_host_endpoint *ep = urb->ep; |
7aac8d15 | 956 | struct usbhsh_device *new_udev = NULL; |
73ef635a | 957 | int is_dir_in = usb_pipein(urb->pipe); |
034d7c13 KM |
958 | int ret; |
959 | ||
73ef635a | 960 | dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out"); |
034d7c13 | 961 | |
b1930da0 KM |
962 | if (!usbhsh_is_running(hpriv)) { |
963 | ret = -EIO; | |
15a3838b | 964 | dev_err(dev, "host is not running\n"); |
b1930da0 KM |
965 | goto usbhsh_urb_enqueue_error_not_linked; |
966 | } | |
967 | ||
034d7c13 | 968 | ret = usb_hcd_link_urb_to_ep(hcd, urb); |
15a3838b KM |
969 | if (ret) { |
970 | dev_err(dev, "urb link failed\n"); | |
034d7c13 | 971 | goto usbhsh_urb_enqueue_error_not_linked; |
15a3838b | 972 | } |
034d7c13 KM |
973 | |
974 | /* | |
7aac8d15 | 975 | * attach udev if needed |
e5679d07 | 976 | * see [image of mod_host] |
034d7c13 | 977 | */ |
c1e4877a | 978 | if (!usbhsh_device_get(hpriv, urb)) { |
7aac8d15 | 979 | new_udev = usbhsh_device_attach(hpriv, urb); |
37332ee0 KM |
980 | if (!new_udev) { |
981 | ret = -EIO; | |
15a3838b | 982 | dev_err(dev, "device attach failed\n"); |
034d7c13 | 983 | goto usbhsh_urb_enqueue_error_not_linked; |
37332ee0 | 984 | } |
034d7c13 KM |
985 | } |
986 | ||
987 | /* | |
4825093e | 988 | * attach endpoint if needed |
e5679d07 | 989 | * see [image of mod_host] |
034d7c13 | 990 | */ |
4825093e KM |
991 | if (!usbhsh_ep_to_uep(ep)) { |
992 | ret = usbhsh_endpoint_attach(hpriv, urb, mem_flags); | |
15a3838b KM |
993 | if (ret < 0) { |
994 | dev_err(dev, "endpoint attach failed\n"); | |
034d7c13 | 995 | goto usbhsh_urb_enqueue_error_free_device; |
15a3838b | 996 | } |
034d7c13 | 997 | } |
034d7c13 KM |
998 | |
999 | /* | |
e5679d07 KM |
1000 | * attach pipe to endpoint |
1001 | * see [image of mod_host] | |
034d7c13 | 1002 | */ |
7b332e5f | 1003 | ret = usbhsh_pipe_attach(hpriv, urb); |
15a3838b KM |
1004 | if (ret < 0) { |
1005 | dev_err(dev, "pipe attach failed\n"); | |
034d7c13 KM |
1006 | goto usbhsh_urb_enqueue_error_free_endpoint; |
1007 | } | |
034d7c13 KM |
1008 | |
1009 | /* | |
1010 | * push packet | |
1011 | */ | |
1012 | if (usb_pipecontrol(urb->pipe)) | |
3eddc9e4 | 1013 | ret = usbhsh_dcp_queue_push(hcd, urb, mem_flags); |
034d7c13 | 1014 | else |
3eddc9e4 | 1015 | ret = usbhsh_queue_push(hcd, urb, mem_flags); |
034d7c13 | 1016 | |
ee8a0bf5 | 1017 | return ret; |
034d7c13 KM |
1018 | |
1019 | usbhsh_urb_enqueue_error_free_endpoint: | |
e5679d07 | 1020 | usbhsh_endpoint_detach(hpriv, ep); |
034d7c13 KM |
1021 | usbhsh_urb_enqueue_error_free_device: |
1022 | if (new_udev) | |
7aac8d15 | 1023 | usbhsh_device_detach(hpriv, new_udev); |
034d7c13 KM |
1024 | usbhsh_urb_enqueue_error_not_linked: |
1025 | ||
1026 | dev_dbg(dev, "%s error\n", __func__); | |
1027 | ||
1028 | return ret; | |
1029 | } | |
1030 | ||
1031 | static int usbhsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) | |
1032 | { | |
1033 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); | |
1034 | struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb); | |
1035 | ||
1036 | if (ureq) { | |
54796543 KM |
1037 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
1038 | struct usbhs_pkt *pkt = &ureq->pkt; | |
1039 | ||
1040 | usbhs_pkt_pop(pkt->pipe, pkt); | |
1041 | usbhsh_queue_done(priv, pkt); | |
034d7c13 KM |
1042 | } |
1043 | ||
1044 | return 0; | |
1045 | } | |
1046 | ||
1047 | static void usbhsh_endpoint_disable(struct usb_hcd *hcd, | |
1048 | struct usb_host_endpoint *ep) | |
1049 | { | |
1050 | struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep); | |
1051 | struct usbhsh_device *udev; | |
1052 | struct usbhsh_hpriv *hpriv; | |
1053 | ||
1054 | /* | |
1055 | * this function might be called manytimes by same hcd/ep | |
fca8ab7e | 1056 | * in-endpoint == out-endpoint if ep == dcp. |
034d7c13 KM |
1057 | */ |
1058 | if (!uep) | |
1059 | return; | |
1060 | ||
1061 | udev = usbhsh_uep_to_udev(uep); | |
1062 | hpriv = usbhsh_hcd_to_hpriv(hcd); | |
1063 | ||
4825093e | 1064 | usbhsh_endpoint_detach(hpriv, ep); |
034d7c13 KM |
1065 | |
1066 | /* | |
1067 | * if there is no endpoint, | |
1068 | * free device | |
1069 | */ | |
1070 | if (!usbhsh_device_has_endpoint(udev)) | |
7aac8d15 | 1071 | usbhsh_device_detach(hpriv, udev); |
034d7c13 KM |
1072 | } |
1073 | ||
1074 | static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf) | |
1075 | { | |
1076 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); | |
034d7c13 KM |
1077 | int roothub_id = 1; /* only 1 root hub */ |
1078 | ||
1079 | /* | |
1080 | * does port stat was changed ? | |
1081 | * check USB_PORT_STAT_C_xxx << 16 | |
1082 | */ | |
1083 | if (usbhsh_port_stat_get(hpriv) & 0xFFFF0000) | |
1084 | *buf = (1 << roothub_id); | |
1085 | else | |
1086 | *buf = 0; | |
1087 | ||
034d7c13 KM |
1088 | return !!(*buf); |
1089 | } | |
1090 | ||
1091 | static int __usbhsh_hub_hub_feature(struct usbhsh_hpriv *hpriv, | |
1092 | u16 typeReq, u16 wValue, | |
1093 | u16 wIndex, char *buf, u16 wLength) | |
1094 | { | |
1095 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); | |
1096 | struct device *dev = usbhs_priv_to_dev(priv); | |
1097 | ||
1098 | switch (wValue) { | |
1099 | case C_HUB_OVER_CURRENT: | |
1100 | case C_HUB_LOCAL_POWER: | |
1101 | dev_dbg(dev, "%s :: C_HUB_xx\n", __func__); | |
1102 | return 0; | |
1103 | } | |
1104 | ||
1105 | return -EPIPE; | |
1106 | } | |
1107 | ||
1108 | static int __usbhsh_hub_port_feature(struct usbhsh_hpriv *hpriv, | |
1109 | u16 typeReq, u16 wValue, | |
1110 | u16 wIndex, char *buf, u16 wLength) | |
1111 | { | |
1112 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); | |
1113 | struct device *dev = usbhs_priv_to_dev(priv); | |
1114 | int enable = (typeReq == SetPortFeature); | |
1115 | int speed, i, timeout = 128; | |
1116 | int roothub_id = 1; /* only 1 root hub */ | |
1117 | ||
1118 | /* common error */ | |
1119 | if (wIndex > roothub_id || wLength != 0) | |
1120 | return -EPIPE; | |
1121 | ||
1122 | /* check wValue */ | |
1123 | switch (wValue) { | |
1124 | case USB_PORT_FEAT_POWER: | |
1125 | usbhs_vbus_ctrl(priv, enable); | |
1126 | dev_dbg(dev, "%s :: USB_PORT_FEAT_POWER\n", __func__); | |
1127 | break; | |
1128 | ||
1129 | case USB_PORT_FEAT_ENABLE: | |
1130 | case USB_PORT_FEAT_SUSPEND: | |
1131 | case USB_PORT_FEAT_C_ENABLE: | |
1132 | case USB_PORT_FEAT_C_SUSPEND: | |
1133 | case USB_PORT_FEAT_C_CONNECTION: | |
1134 | case USB_PORT_FEAT_C_OVER_CURRENT: | |
1135 | case USB_PORT_FEAT_C_RESET: | |
1136 | dev_dbg(dev, "%s :: USB_PORT_FEAT_xxx\n", __func__); | |
1137 | break; | |
1138 | ||
1139 | case USB_PORT_FEAT_RESET: | |
1140 | if (!enable) | |
1141 | break; | |
1142 | ||
1143 | usbhsh_port_stat_clear(hpriv, | |
1144 | USB_PORT_STAT_HIGH_SPEED | | |
1145 | USB_PORT_STAT_LOW_SPEED); | |
1146 | ||
2d833faa KM |
1147 | usbhsh_queue_force_pop_all(priv); |
1148 | ||
034d7c13 KM |
1149 | usbhs_bus_send_reset(priv); |
1150 | msleep(20); | |
1151 | usbhs_bus_send_sof_enable(priv); | |
1152 | ||
1153 | for (i = 0; i < timeout ; i++) { | |
1154 | switch (usbhs_bus_get_speed(priv)) { | |
1155 | case USB_SPEED_LOW: | |
1156 | speed = USB_PORT_STAT_LOW_SPEED; | |
1157 | goto got_usb_bus_speed; | |
1158 | case USB_SPEED_HIGH: | |
1159 | speed = USB_PORT_STAT_HIGH_SPEED; | |
1160 | goto got_usb_bus_speed; | |
1161 | case USB_SPEED_FULL: | |
1162 | speed = 0; | |
1163 | goto got_usb_bus_speed; | |
1164 | } | |
1165 | ||
1166 | msleep(20); | |
1167 | } | |
1168 | return -EPIPE; | |
1169 | ||
1170 | got_usb_bus_speed: | |
1171 | usbhsh_port_stat_set(hpriv, speed); | |
1172 | usbhsh_port_stat_set(hpriv, USB_PORT_STAT_ENABLE); | |
1173 | ||
1174 | dev_dbg(dev, "%s :: USB_PORT_FEAT_RESET (speed = %d)\n", | |
1175 | __func__, speed); | |
1176 | ||
1177 | /* status change is not needed */ | |
1178 | return 0; | |
1179 | ||
1180 | default: | |
1181 | return -EPIPE; | |
1182 | } | |
1183 | ||
1184 | /* set/clear status */ | |
1185 | if (enable) | |
1186 | usbhsh_port_stat_set(hpriv, (1 << wValue)); | |
1187 | else | |
1188 | usbhsh_port_stat_clear(hpriv, (1 << wValue)); | |
1189 | ||
1190 | return 0; | |
1191 | } | |
1192 | ||
1193 | static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv, | |
1194 | u16 typeReq, u16 wValue, | |
1195 | u16 wIndex, char *buf, u16 wLength) | |
1196 | { | |
1197 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); | |
1198 | struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf; | |
1199 | struct device *dev = usbhs_priv_to_dev(priv); | |
1200 | int roothub_id = 1; /* only 1 root hub */ | |
1201 | ||
1202 | switch (typeReq) { | |
1203 | case GetHubStatus: | |
1204 | dev_dbg(dev, "%s :: GetHubStatus\n", __func__); | |
1205 | ||
1206 | *buf = 0x00; | |
1207 | break; | |
1208 | ||
1209 | case GetPortStatus: | |
1210 | if (wIndex != roothub_id) | |
1211 | return -EPIPE; | |
1212 | ||
1213 | dev_dbg(dev, "%s :: GetPortStatus\n", __func__); | |
1214 | *(__le32 *)buf = cpu_to_le32(usbhsh_port_stat_get(hpriv)); | |
1215 | break; | |
1216 | ||
1217 | case GetHubDescriptor: | |
b11373de | 1218 | desc->bDescriptorType = USB_DT_HUB; |
034d7c13 KM |
1219 | desc->bHubContrCurrent = 0; |
1220 | desc->bNbrPorts = roothub_id; | |
1221 | desc->bDescLength = 9; | |
1222 | desc->bPwrOn2PwrGood = 0; | |
a1837d15 SS |
1223 | desc->wHubCharacteristics = |
1224 | cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM); | |
034d7c13 KM |
1225 | desc->u.hs.DeviceRemovable[0] = (roothub_id << 1); |
1226 | desc->u.hs.DeviceRemovable[1] = ~0; | |
1227 | dev_dbg(dev, "%s :: GetHubDescriptor\n", __func__); | |
1228 | break; | |
1229 | } | |
1230 | ||
1231 | return 0; | |
1232 | } | |
1233 | ||
1234 | static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, | |
1235 | u16 wIndex, char *buf, u16 wLength) | |
1236 | { | |
1237 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); | |
1238 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); | |
1239 | struct device *dev = usbhs_priv_to_dev(priv); | |
1240 | int ret = -EPIPE; | |
1241 | ||
1242 | switch (typeReq) { | |
1243 | ||
1244 | /* Hub Feature */ | |
1245 | case ClearHubFeature: | |
1246 | case SetHubFeature: | |
1247 | ret = __usbhsh_hub_hub_feature(hpriv, typeReq, | |
1248 | wValue, wIndex, buf, wLength); | |
1249 | break; | |
1250 | ||
1251 | /* Port Feature */ | |
1252 | case SetPortFeature: | |
1253 | case ClearPortFeature: | |
1254 | ret = __usbhsh_hub_port_feature(hpriv, typeReq, | |
1255 | wValue, wIndex, buf, wLength); | |
1256 | break; | |
1257 | ||
1258 | /* Get status */ | |
1259 | case GetHubStatus: | |
1260 | case GetPortStatus: | |
1261 | case GetHubDescriptor: | |
1262 | ret = __usbhsh_hub_get_status(hpriv, typeReq, | |
1263 | wValue, wIndex, buf, wLength); | |
1264 | break; | |
1265 | } | |
1266 | ||
1267 | dev_dbg(dev, "typeReq = %x, ret = %d, port_stat = %x\n", | |
1268 | typeReq, ret, usbhsh_port_stat_get(hpriv)); | |
1269 | ||
1270 | return ret; | |
1271 | } | |
1272 | ||
e7ae64c7 KM |
1273 | static int usbhsh_bus_nop(struct usb_hcd *hcd) |
1274 | { | |
1275 | /* nothing to do */ | |
1276 | return 0; | |
1277 | } | |
1278 | ||
37076e94 | 1279 | static const struct hc_driver usbhsh_driver = { |
034d7c13 KM |
1280 | .description = usbhsh_hcd_name, |
1281 | .hcd_priv_size = sizeof(struct usbhsh_hpriv), | |
1282 | ||
1283 | /* | |
1284 | * generic hardware linkage | |
1285 | */ | |
1286 | .flags = HCD_USB2, | |
1287 | ||
1288 | .start = usbhsh_host_start, | |
1289 | .stop = usbhsh_host_stop, | |
1290 | ||
1291 | /* | |
1292 | * managing i/o requests and associated device resources | |
1293 | */ | |
1294 | .urb_enqueue = usbhsh_urb_enqueue, | |
1295 | .urb_dequeue = usbhsh_urb_dequeue, | |
1296 | .endpoint_disable = usbhsh_endpoint_disable, | |
1297 | ||
1298 | /* | |
1299 | * root hub | |
1300 | */ | |
1301 | .hub_status_data = usbhsh_hub_status_data, | |
1302 | .hub_control = usbhsh_hub_control, | |
e7ae64c7 KM |
1303 | .bus_suspend = usbhsh_bus_nop, |
1304 | .bus_resume = usbhsh_bus_nop, | |
034d7c13 KM |
1305 | }; |
1306 | ||
1307 | /* | |
1308 | * interrupt functions | |
1309 | */ | |
1310 | static int usbhsh_irq_attch(struct usbhs_priv *priv, | |
1311 | struct usbhs_irq_state *irq_state) | |
1312 | { | |
1313 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); | |
1314 | struct device *dev = usbhs_priv_to_dev(priv); | |
1315 | ||
1316 | dev_dbg(dev, "device attached\n"); | |
1317 | ||
1318 | usbhsh_port_stat_set(hpriv, USB_PORT_STAT_CONNECTION); | |
1319 | usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16); | |
1320 | ||
31e00fd1 KM |
1321 | /* |
1322 | * attch interrupt might happen infinitely on some device | |
1323 | * (on self power USB hub ?) | |
1324 | * disable it here. | |
b1930da0 KM |
1325 | * |
1326 | * usbhsh_is_running() becomes effective | |
1327 | * according to this process. | |
1328 | * see | |
1329 | * usbhsh_is_running() | |
1330 | * usbhsh_urb_enqueue() | |
31e00fd1 KM |
1331 | */ |
1332 | hpriv->mod.irq_attch = NULL; | |
1333 | usbhs_irq_callback_update(priv, &hpriv->mod); | |
1334 | ||
034d7c13 KM |
1335 | return 0; |
1336 | } | |
1337 | ||
1338 | static int usbhsh_irq_dtch(struct usbhs_priv *priv, | |
1339 | struct usbhs_irq_state *irq_state) | |
1340 | { | |
1341 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); | |
1342 | struct device *dev = usbhs_priv_to_dev(priv); | |
1343 | ||
1344 | dev_dbg(dev, "device detached\n"); | |
1345 | ||
1346 | usbhsh_port_stat_clear(hpriv, USB_PORT_STAT_CONNECTION); | |
1347 | usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16); | |
1348 | ||
31e00fd1 KM |
1349 | /* |
1350 | * enable attch interrupt again | |
b1930da0 KM |
1351 | * |
1352 | * usbhsh_is_running() becomes invalid | |
1353 | * according to this process. | |
1354 | * see | |
1355 | * usbhsh_is_running() | |
1356 | * usbhsh_urb_enqueue() | |
31e00fd1 KM |
1357 | */ |
1358 | hpriv->mod.irq_attch = usbhsh_irq_attch; | |
1359 | usbhs_irq_callback_update(priv, &hpriv->mod); | |
1360 | ||
2d833faa KM |
1361 | /* |
1362 | * usbhsh_queue_force_pop_all() should be called | |
1363 | * after usbhsh_is_running() becomes invalid. | |
1364 | */ | |
1365 | usbhsh_queue_force_pop_all(priv); | |
1366 | ||
034d7c13 KM |
1367 | return 0; |
1368 | } | |
1369 | ||
1370 | static int usbhsh_irq_setup_ack(struct usbhs_priv *priv, | |
1371 | struct usbhs_irq_state *irq_state) | |
1372 | { | |
1373 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); | |
1374 | struct device *dev = usbhs_priv_to_dev(priv); | |
1375 | ||
1376 | dev_dbg(dev, "setup packet OK\n"); | |
1377 | ||
7fccd480 | 1378 | complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */ |
034d7c13 KM |
1379 | |
1380 | return 0; | |
1381 | } | |
1382 | ||
1383 | static int usbhsh_irq_setup_err(struct usbhs_priv *priv, | |
1384 | struct usbhs_irq_state *irq_state) | |
1385 | { | |
1386 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); | |
1387 | struct device *dev = usbhs_priv_to_dev(priv); | |
1388 | ||
1389 | dev_dbg(dev, "setup packet Err\n"); | |
1390 | ||
7fccd480 | 1391 | complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */ |
034d7c13 KM |
1392 | |
1393 | return 0; | |
1394 | } | |
1395 | ||
1396 | /* | |
1397 | * module start/stop | |
1398 | */ | |
1399 | static void usbhsh_pipe_init_for_host(struct usbhs_priv *priv) | |
1400 | { | |
1401 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); | |
034d7c13 | 1402 | struct usbhs_pipe *pipe; |
51f141a9 YS |
1403 | struct renesas_usbhs_driver_pipe_config *pipe_configs = |
1404 | usbhs_get_dparam(priv, pipe_configs); | |
034d7c13 KM |
1405 | int pipe_size = usbhs_get_dparam(priv, pipe_size); |
1406 | int old_type, dir_in, i; | |
1407 | ||
1408 | /* init all pipe */ | |
1409 | old_type = USB_ENDPOINT_XFER_CONTROL; | |
1410 | for (i = 0; i < pipe_size; i++) { | |
034d7c13 KM |
1411 | |
1412 | /* | |
1413 | * data "output" will be finished as soon as possible, | |
1414 | * but there is no guaranty at data "input" case. | |
1415 | * | |
1416 | * "input" needs "standby" pipe. | |
1417 | * So, "input" direction pipe > "output" direction pipe | |
1418 | * is good idea. | |
1419 | * | |
1420 | * 1st USB_ENDPOINT_XFER_xxx will be output direction, | |
1421 | * and the other will be input direction here. | |
1422 | * | |
1423 | * ex) | |
1424 | * ... | |
1425 | * USB_ENDPOINT_XFER_ISOC -> dir out | |
1426 | * USB_ENDPOINT_XFER_ISOC -> dir in | |
1427 | * USB_ENDPOINT_XFER_BULK -> dir out | |
1428 | * USB_ENDPOINT_XFER_BULK -> dir in | |
1429 | * USB_ENDPOINT_XFER_BULK -> dir in | |
1430 | * ... | |
1431 | */ | |
51f141a9 YS |
1432 | dir_in = (pipe_configs[i].type == old_type); |
1433 | old_type = pipe_configs[i].type; | |
034d7c13 | 1434 | |
51f141a9 | 1435 | if (USB_ENDPOINT_XFER_CONTROL == pipe_configs[i].type) { |
034d7c13 KM |
1436 | pipe = usbhs_dcp_malloc(priv); |
1437 | usbhsh_hpriv_to_dcp(hpriv) = pipe; | |
1438 | } else { | |
1439 | pipe = usbhs_pipe_malloc(priv, | |
51f141a9 | 1440 | pipe_configs[i].type, |
034d7c13 KM |
1441 | dir_in); |
1442 | } | |
1443 | ||
e5679d07 | 1444 | pipe->mod_private = NULL; |
034d7c13 KM |
1445 | } |
1446 | } | |
1447 | ||
1448 | static int usbhsh_start(struct usbhs_priv *priv) | |
1449 | { | |
1450 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); | |
1451 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); | |
1452 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | |
1453 | struct device *dev = usbhs_priv_to_dev(priv); | |
1454 | int ret; | |
1455 | ||
1456 | /* add hcd */ | |
1457 | ret = usb_add_hcd(hcd, 0, 0); | |
1458 | if (ret < 0) | |
1459 | return 0; | |
3c9740a1 | 1460 | device_wakeup_enable(hcd->self.controller); |
034d7c13 KM |
1461 | |
1462 | /* | |
1463 | * pipe initialize and enable DCP | |
1464 | */ | |
cdeb7943 | 1465 | usbhs_fifo_init(priv); |
034d7c13 KM |
1466 | usbhs_pipe_init(priv, |
1467 | usbhsh_dma_map_ctrl); | |
034d7c13 KM |
1468 | usbhsh_pipe_init_for_host(priv); |
1469 | ||
1470 | /* | |
1471 | * system config enble | |
1472 | * - HI speed | |
1473 | * - host | |
1474 | * - usb module | |
1475 | */ | |
034d7c13 | 1476 | usbhs_sys_host_ctrl(priv, 1); |
034d7c13 KM |
1477 | |
1478 | /* | |
1479 | * enable irq callback | |
1480 | */ | |
1481 | mod->irq_attch = usbhsh_irq_attch; | |
1482 | mod->irq_dtch = usbhsh_irq_dtch; | |
1483 | mod->irq_sack = usbhsh_irq_setup_ack; | |
1484 | mod->irq_sign = usbhsh_irq_setup_err; | |
1485 | usbhs_irq_callback_update(priv, mod); | |
1486 | ||
1487 | dev_dbg(dev, "start host\n"); | |
1488 | ||
1489 | return ret; | |
1490 | } | |
1491 | ||
1492 | static int usbhsh_stop(struct usbhs_priv *priv) | |
1493 | { | |
1494 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); | |
1495 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); | |
146ee50a | 1496 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
034d7c13 KM |
1497 | struct device *dev = usbhs_priv_to_dev(priv); |
1498 | ||
146ee50a KM |
1499 | /* |
1500 | * disable irq callback | |
1501 | */ | |
1502 | mod->irq_attch = NULL; | |
1503 | mod->irq_dtch = NULL; | |
1504 | mod->irq_sack = NULL; | |
1505 | mod->irq_sign = NULL; | |
1506 | usbhs_irq_callback_update(priv, mod); | |
1507 | ||
034d7c13 KM |
1508 | usb_remove_hcd(hcd); |
1509 | ||
1510 | /* disable sys */ | |
034d7c13 | 1511 | usbhs_sys_host_ctrl(priv, 0); |
034d7c13 KM |
1512 | |
1513 | dev_dbg(dev, "quit host\n"); | |
1514 | ||
1515 | return 0; | |
1516 | } | |
1517 | ||
b7a8d17d | 1518 | int usbhs_mod_host_probe(struct usbhs_priv *priv) |
034d7c13 KM |
1519 | { |
1520 | struct usbhsh_hpriv *hpriv; | |
1521 | struct usb_hcd *hcd; | |
034d7c13 KM |
1522 | struct usbhsh_device *udev; |
1523 | struct device *dev = usbhs_priv_to_dev(priv); | |
034d7c13 KM |
1524 | int i; |
1525 | ||
1526 | /* initialize hcd */ | |
1527 | hcd = usb_create_hcd(&usbhsh_driver, dev, usbhsh_hcd_name); | |
1528 | if (!hcd) { | |
1529 | dev_err(dev, "Failed to create hcd\n"); | |
1530 | return -ENOMEM; | |
1531 | } | |
1115b9e2 | 1532 | hcd->has_tt = 1; /* for low/full speed */ |
034d7c13 | 1533 | |
034d7c13 KM |
1534 | /* |
1535 | * CAUTION | |
1536 | * | |
1537 | * There is no guarantee that it is possible to access usb module here. | |
1538 | * Don't accesses to it. | |
1539 | * The accesse will be enable after "usbhsh_start" | |
1540 | */ | |
1541 | ||
1542 | hpriv = usbhsh_hcd_to_hpriv(hcd); | |
1543 | ||
1544 | /* | |
1545 | * register itself | |
1546 | */ | |
1547 | usbhs_mod_register(priv, &hpriv->mod, USBHS_HOST); | |
1548 | ||
1549 | /* init hpriv */ | |
1550 | hpriv->mod.name = "host"; | |
1551 | hpriv->mod.start = usbhsh_start; | |
1552 | hpriv->mod.stop = usbhsh_stop; | |
034d7c13 KM |
1553 | usbhsh_port_stat_init(hpriv); |
1554 | ||
1555 | /* init all device */ | |
1556 | usbhsh_for_each_udev_with_dev0(udev, hpriv, i) { | |
1557 | udev->usbv = NULL; | |
1558 | INIT_LIST_HEAD(&udev->ep_list_head); | |
1559 | } | |
1560 | ||
1561 | dev_info(dev, "host probed\n"); | |
1562 | ||
1563 | return 0; | |
034d7c13 KM |
1564 | } |
1565 | ||
b7a8d17d | 1566 | int usbhs_mod_host_remove(struct usbhs_priv *priv) |
034d7c13 KM |
1567 | { |
1568 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); | |
1569 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); | |
1570 | ||
034d7c13 KM |
1571 | usb_put_hcd(hcd); |
1572 | ||
1573 | return 0; | |
1574 | } |