Commit | Line | Data |
---|---|---|
550a7375 FB |
1 | /* |
2 | * Copyright (C) 2005-2007 by Texas Instruments | |
3 | * Some code has been taken from tusb6010.c | |
4 | * Copyrights for that are attributable to: | |
5 | * Copyright (C) 2006 Nokia Corporation | |
550a7375 FB |
6 | * Tony Lindgren <tony@atomide.com> |
7 | * | |
8 | * This file is part of the Inventra Controller Driver for Linux. | |
9 | * | |
10 | * The Inventra Controller Driver for Linux is free software; you | |
11 | * can redistribute it and/or modify it under the terms of the GNU | |
12 | * General Public License version 2 as published by the Free Software | |
13 | * Foundation. | |
14 | * | |
15 | * The Inventra Controller Driver for Linux is distributed in | |
16 | * the hope that it will be useful, but WITHOUT ANY WARRANTY; | |
17 | * without even the implied warranty of MERCHANTABILITY or | |
18 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public | |
19 | * License for more details. | |
20 | * | |
21 | * You should have received a copy of the GNU General Public License | |
22 | * along with The Inventra Controller Driver for Linux ; if not, | |
23 | * write to the Free Software Foundation, Inc., 59 Temple Place, | |
24 | * Suite 330, Boston, MA 02111-1307 USA | |
25 | * | |
26 | */ | |
27 | #include <linux/module.h> | |
28 | #include <linux/kernel.h> | |
29 | #include <linux/sched.h> | |
550a7375 FB |
30 | #include <linux/init.h> |
31 | #include <linux/list.h> | |
550a7375 | 32 | #include <linux/io.h> |
00a0b1d5 | 33 | #include <linux/of.h> |
dc09886b FB |
34 | #include <linux/platform_device.h> |
35 | #include <linux/dma-mapping.h> | |
207b0e1f HH |
36 | #include <linux/pm_runtime.h> |
37 | #include <linux/err.h> | |
12a19b5f | 38 | #include <linux/delay.h> |
8055555f | 39 | #include <linux/usb/musb.h> |
14da699b | 40 | #include <linux/phy/omap_control_phy.h> |
8934d3e4 | 41 | #include <linux/of_platform.h> |
550a7375 | 42 | |
550a7375 FB |
43 | #include "musb_core.h" |
44 | #include "omap2430.h" | |
45 | ||
a3cee12a FB |
46 | struct omap2430_glue { |
47 | struct device *dev; | |
48 | struct platform_device *musb; | |
8055555f | 49 | enum musb_vbus_id_status status; |
1e5acb8d | 50 | struct work_struct omap_musb_mailbox_work; |
ca784be3 | 51 | struct device *control_otghs; |
a3cee12a | 52 | }; |
c20aebb9 | 53 | #define glue_to_musb(g) platform_get_drvdata(g->musb) |
a3cee12a | 54 | |
4b58ed11 | 55 | static struct omap2430_glue *_glue; |
c9721438 | 56 | |
743411b3 | 57 | static void omap2430_musb_set_vbus(struct musb *musb, int is_on) |
550a7375 | 58 | { |
d445b6da | 59 | struct usb_otg *otg = musb->xceiv->otg; |
550a7375 | 60 | u8 devctl; |
594632ef | 61 | unsigned long timeout = jiffies + msecs_to_jiffies(1000); |
550a7375 FB |
62 | /* HDRC controls CPEN, but beware current surges during device |
63 | * connect. They can trigger transient overcurrent conditions | |
64 | * that must be ignored. | |
65 | */ | |
66 | ||
67 | devctl = musb_readb(musb->mregs, MUSB_DEVCTL); | |
68 | ||
69 | if (is_on) { | |
e47d9254 | 70 | if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) { |
12a19b5f | 71 | int loops = 100; |
594632ef HH |
72 | /* start the session */ |
73 | devctl |= MUSB_DEVCTL_SESSION; | |
74 | musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); | |
75 | /* | |
76 | * Wait for the musb to set as A device to enable the | |
77 | * VBUS | |
78 | */ | |
5a805309 SS |
79 | while (musb_readb(musb->mregs, MUSB_DEVCTL) & |
80 | MUSB_DEVCTL_BDEVICE) { | |
594632ef | 81 | |
12a19b5f | 82 | mdelay(5); |
594632ef HH |
83 | cpu_relax(); |
84 | ||
12a19b5f N |
85 | if (time_after(jiffies, timeout) |
86 | || loops-- <= 0) { | |
594632ef HH |
87 | dev_err(musb->controller, |
88 | "configured as A device timeout"); | |
594632ef HH |
89 | break; |
90 | } | |
91 | } | |
92 | ||
bb467cf5 | 93 | otg_set_vbus(otg, 1); |
594632ef HH |
94 | } else { |
95 | musb->is_active = 1; | |
d445b6da | 96 | otg->default_a = 1; |
e47d9254 | 97 | musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; |
594632ef HH |
98 | devctl |= MUSB_DEVCTL_SESSION; |
99 | MUSB_HST_MODE(musb); | |
100 | } | |
550a7375 FB |
101 | } else { |
102 | musb->is_active = 0; | |
103 | ||
104 | /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and | |
105 | * jumping right to B_IDLE... | |
106 | */ | |
107 | ||
d445b6da | 108 | otg->default_a = 0; |
e47d9254 | 109 | musb->xceiv->otg->state = OTG_STATE_B_IDLE; |
550a7375 FB |
110 | devctl &= ~MUSB_DEVCTL_SESSION; |
111 | ||
112 | MUSB_DEV_MODE(musb); | |
113 | } | |
114 | musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); | |
115 | ||
5c8a86e1 | 116 | dev_dbg(musb->controller, "VBUS %s, devctl %02x " |
550a7375 | 117 | /* otg %3x conf %08x prcm %08x */ "\n", |
e47d9254 | 118 | usb_otg_state_string(musb->xceiv->otg->state), |
550a7375 FB |
119 | musb_readb(musb->mregs, MUSB_DEVCTL)); |
120 | } | |
550a7375 | 121 | |
c20aebb9 FB |
122 | static inline void omap2430_low_level_exit(struct musb *musb) |
123 | { | |
124 | u32 l; | |
125 | ||
126 | /* in any role */ | |
127 | l = musb_readl(musb->mregs, OTG_FORCESTDBY); | |
128 | l |= ENABLEFORCE; /* enable MSTANDBY */ | |
129 | musb_writel(musb->mregs, OTG_FORCESTDBY, l); | |
c20aebb9 FB |
130 | } |
131 | ||
132 | static inline void omap2430_low_level_init(struct musb *musb) | |
133 | { | |
134 | u32 l; | |
135 | ||
c20aebb9 FB |
136 | l = musb_readl(musb->mregs, OTG_FORCESTDBY); |
137 | l &= ~ENABLEFORCE; /* disable MSTANDBY */ | |
138 | musb_writel(musb->mregs, OTG_FORCESTDBY, l); | |
139 | } | |
140 | ||
12b7db2b | 141 | static int omap2430_musb_mailbox(enum musb_vbus_id_status status) |
594632ef | 142 | { |
c9721438 | 143 | struct omap2430_glue *glue = _glue; |
712d8efa | 144 | |
f8c4b0e7 AK |
145 | if (!glue) { |
146 | pr_err("%s: musb core is not yet initialized\n", __func__); | |
12b7db2b | 147 | return -EPROBE_DEFER; |
f8c4b0e7 AK |
148 | } |
149 | glue->status = status; | |
150 | ||
151 | if (!glue_to_musb(glue)) { | |
80ab72e1 | 152 | pr_err("%s: musb core is not yet ready\n", __func__); |
12b7db2b | 153 | return -EPROBE_DEFER; |
c9721438 | 154 | } |
712d8efa | 155 | |
c9721438 | 156 | schedule_work(&glue->omap_musb_mailbox_work); |
12b7db2b TL |
157 | |
158 | return 0; | |
712d8efa VP |
159 | } |
160 | ||
c9721438 | 161 | static void omap_musb_set_mailbox(struct omap2430_glue *glue) |
712d8efa | 162 | { |
1e5acb8d | 163 | struct musb *musb = glue_to_musb(glue); |
ae909fe4 TL |
164 | struct musb_hdrc_platform_data *pdata = |
165 | dev_get_platdata(musb->controller); | |
594632ef | 166 | struct omap_musb_board_data *data = pdata->board_data; |
c83a8542 | 167 | struct usb_otg *otg = musb->xceiv->otg; |
594632ef | 168 | |
ae909fe4 | 169 | pm_runtime_get_sync(musb->controller); |
c9721438 | 170 | switch (glue->status) { |
8055555f | 171 | case MUSB_ID_GROUND: |
ae909fe4 | 172 | dev_dbg(musb->controller, "ID GND\n"); |
594632ef | 173 | |
c83a8542 | 174 | otg->default_a = true; |
e47d9254 | 175 | musb->xceiv->otg->state = OTG_STATE_A_IDLE; |
c9721438 | 176 | musb->xceiv->last_event = USB_EVENT_ID; |
032ec49f | 177 | if (musb->gadget_driver) { |
ca784be3 KVA |
178 | omap_control_usb_set_mode(glue->control_otghs, |
179 | USB_MODE_HOST); | |
70045c57 | 180 | omap2430_musb_set_vbus(musb, 1); |
594632ef HH |
181 | } |
182 | break; | |
183 | ||
8055555f | 184 | case MUSB_VBUS_VALID: |
ae909fe4 | 185 | dev_dbg(musb->controller, "VBUS Connect\n"); |
594632ef | 186 | |
c83a8542 | 187 | otg->default_a = false; |
e47d9254 | 188 | musb->xceiv->otg->state = OTG_STATE_B_IDLE; |
c9721438 | 189 | musb->xceiv->last_event = USB_EVENT_VBUS; |
ca784be3 | 190 | omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); |
594632ef HH |
191 | break; |
192 | ||
8055555f TL |
193 | case MUSB_ID_FLOAT: |
194 | case MUSB_VBUS_OFF: | |
ae909fe4 | 195 | dev_dbg(musb->controller, "VBUS Disconnect\n"); |
594632ef | 196 | |
c9721438 | 197 | musb->xceiv->last_event = USB_EVENT_NONE; |
21f77bee | 198 | if (musb->gadget_driver) |
2c1fe89d | 199 | omap2430_musb_set_vbus(musb, 0); |
7acc6197 | 200 | |
bb467cf5 KVA |
201 | if (data->interface_type == MUSB_INTERFACE_UTMI) |
202 | otg_set_vbus(musb->xceiv->otg, 0); | |
203 | ||
ca784be3 KVA |
204 | omap_control_usb_set_mode(glue->control_otghs, |
205 | USB_MODE_DISCONNECT); | |
594632ef HH |
206 | break; |
207 | default: | |
ae909fe4 | 208 | dev_dbg(musb->controller, "ID float\n"); |
594632ef | 209 | } |
ae909fe4 TL |
210 | pm_runtime_mark_last_busy(musb->controller); |
211 | pm_runtime_put_autosuspend(musb->controller); | |
6fa7178c PR |
212 | atomic_notifier_call_chain(&musb->xceiv->notifier, |
213 | musb->xceiv->last_event, NULL); | |
594632ef HH |
214 | } |
215 | ||
c9721438 KVA |
216 | |
217 | static void omap_musb_mailbox_work(struct work_struct *mailbox_work) | |
218 | { | |
219 | struct omap2430_glue *glue = container_of(mailbox_work, | |
220 | struct omap2430_glue, omap_musb_mailbox_work); | |
8b2bc2c9 | 221 | |
c9721438 KVA |
222 | omap_musb_set_mailbox(glue); |
223 | } | |
224 | ||
baef653a PDS |
225 | static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci) |
226 | { | |
227 | unsigned long flags; | |
228 | irqreturn_t retval = IRQ_NONE; | |
229 | struct musb *musb = __hci; | |
230 | ||
231 | spin_lock_irqsave(&musb->lock, flags); | |
232 | ||
233 | musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); | |
234 | musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); | |
235 | musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); | |
236 | ||
237 | if (musb->int_usb || musb->int_tx || musb->int_rx) | |
238 | retval = musb_interrupt(musb); | |
239 | ||
240 | spin_unlock_irqrestore(&musb->lock, flags); | |
241 | ||
242 | return retval; | |
243 | } | |
244 | ||
743411b3 | 245 | static int omap2430_musb_init(struct musb *musb) |
550a7375 | 246 | { |
ad579699 S |
247 | u32 l; |
248 | int status = 0; | |
ea65df57 | 249 | struct device *dev = musb->controller; |
c9721438 | 250 | struct omap2430_glue *glue = dev_get_drvdata(dev->parent); |
c1a7d67c | 251 | struct musb_hdrc_platform_data *plat = dev_get_platdata(dev); |
ea65df57 | 252 | struct omap_musb_board_data *data = plat->board_data; |
550a7375 | 253 | |
84e250ff DB |
254 | /* We require some kind of external transceiver, hooked |
255 | * up through ULPI. TWL4030-family PMICs include one, | |
256 | * which needs a driver, drivers aren't always needed. | |
257 | */ | |
3e3101d5 KVA |
258 | if (dev->parent->of_node) { |
259 | musb->phy = devm_phy_get(dev->parent, "usb2-phy"); | |
260 | ||
261 | /* We can't totally remove musb->xceiv as of now because | |
262 | * musb core uses xceiv.state and xceiv.otg. Once we have | |
263 | * a separate state machine to handle otg, these can be moved | |
264 | * out of xceiv and then we can start using the generic PHY | |
265 | * framework | |
266 | */ | |
b16604f2 KVA |
267 | musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, |
268 | "usb-phy", 0); | |
3e3101d5 | 269 | } else { |
b16604f2 | 270 | musb->xceiv = devm_usb_get_phy_dev(dev, 0); |
3e3101d5 KVA |
271 | musb->phy = devm_phy_get(dev, "usb"); |
272 | } | |
b16604f2 | 273 | |
a90199bb FB |
274 | if (IS_ERR(musb->xceiv)) { |
275 | status = PTR_ERR(musb->xceiv); | |
276 | ||
277 | if (status == -ENXIO) | |
278 | return status; | |
279 | ||
dc66ba8d | 280 | dev_dbg(dev, "HS USB OTG: no transceiver configured\n"); |
25736e0c | 281 | return -EPROBE_DEFER; |
84e250ff DB |
282 | } |
283 | ||
3e3101d5 | 284 | if (IS_ERR(musb->phy)) { |
71127a79 | 285 | dev_err(dev, "HS USB OTG: no PHY configured\n"); |
3e3101d5 KVA |
286 | return PTR_ERR(musb->phy); |
287 | } | |
baef653a | 288 | musb->isr = omap2430_musb_interrupt; |
a83e17d0 | 289 | phy_init(musb->phy); |
d8e5f0ec | 290 | phy_power_on(musb->phy); |
baef653a | 291 | |
8573e6a6 | 292 | l = musb_readl(musb->mregs, OTG_INTERFSEL); |
de2e1b0c MM |
293 | |
294 | if (data->interface_type == MUSB_INTERFACE_UTMI) { | |
295 | /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */ | |
296 | l &= ~ULPI_12PIN; /* Disable ULPI */ | |
297 | l |= UTMI_8BIT; /* Enable UTMI */ | |
298 | } else { | |
299 | l |= ULPI_12PIN; | |
300 | } | |
301 | ||
8573e6a6 | 302 | musb_writel(musb->mregs, OTG_INTERFSEL, l); |
550a7375 | 303 | |
71127a79 | 304 | dev_dbg(dev, "HS USB OTG: revision 0x%x, sysconfig 0x%02x, " |
550a7375 | 305 | "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n", |
8573e6a6 FB |
306 | musb_readl(musb->mregs, OTG_REVISION), |
307 | musb_readl(musb->mregs, OTG_SYSCONFIG), | |
308 | musb_readl(musb->mregs, OTG_SYSSTATUS), | |
309 | musb_readl(musb->mregs, OTG_INTERFSEL), | |
310 | musb_readl(musb->mregs, OTG_SIMENABLE)); | |
550a7375 | 311 | |
8055555f | 312 | if (glue->status != MUSB_UNKNOWN) |
c9721438 KVA |
313 | omap_musb_set_mailbox(glue); |
314 | ||
550a7375 FB |
315 | return 0; |
316 | } | |
317 | ||
002eda13 HH |
318 | static void omap2430_musb_enable(struct musb *musb) |
319 | { | |
320 | u8 devctl; | |
321 | unsigned long timeout = jiffies + msecs_to_jiffies(1000); | |
322 | struct device *dev = musb->controller; | |
c9721438 | 323 | struct omap2430_glue *glue = dev_get_drvdata(dev->parent); |
c1a7d67c | 324 | struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); |
002eda13 HH |
325 | struct omap_musb_board_data *data = pdata->board_data; |
326 | ||
a83e17d0 | 327 | |
c9721438 | 328 | switch (glue->status) { |
002eda13 | 329 | |
8055555f | 330 | case MUSB_ID_GROUND: |
ca784be3 | 331 | omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST); |
08dec56e FC |
332 | if (data->interface_type != MUSB_INTERFACE_UTMI) |
333 | break; | |
334 | devctl = musb_readb(musb->mregs, MUSB_DEVCTL); | |
335 | /* start the session */ | |
336 | devctl |= MUSB_DEVCTL_SESSION; | |
337 | musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); | |
338 | while (musb_readb(musb->mregs, MUSB_DEVCTL) & | |
339 | MUSB_DEVCTL_BDEVICE) { | |
340 | cpu_relax(); | |
341 | ||
342 | if (time_after(jiffies, timeout)) { | |
343 | dev_err(dev, "configured as A device timeout"); | |
344 | break; | |
002eda13 HH |
345 | } |
346 | } | |
347 | break; | |
348 | ||
8055555f | 349 | case MUSB_VBUS_VALID: |
ca784be3 | 350 | omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); |
002eda13 HH |
351 | break; |
352 | ||
353 | default: | |
354 | break; | |
355 | } | |
356 | } | |
357 | ||
358 | static void omap2430_musb_disable(struct musb *musb) | |
359 | { | |
c9721438 KVA |
360 | struct device *dev = musb->controller; |
361 | struct omap2430_glue *glue = dev_get_drvdata(dev->parent); | |
362 | ||
8055555f | 363 | if (glue->status != MUSB_UNKNOWN) |
ca784be3 KVA |
364 | omap_control_usb_set_mode(glue->control_otghs, |
365 | USB_MODE_DISCONNECT); | |
550a7375 FB |
366 | } |
367 | ||
743411b3 | 368 | static int omap2430_musb_exit(struct musb *musb) |
550a7375 | 369 | { |
a83e17d0 TL |
370 | struct device *dev = musb->controller; |
371 | struct omap2430_glue *glue = dev_get_drvdata(dev->parent); | |
550a7375 | 372 | |
c20aebb9 | 373 | omap2430_low_level_exit(musb); |
d8e5f0ec | 374 | phy_power_off(musb->phy); |
3e3101d5 | 375 | phy_exit(musb->phy); |
a83e17d0 TL |
376 | musb->phy = NULL; |
377 | cancel_work_sync(&glue->omap_musb_mailbox_work); | |
c20aebb9 | 378 | |
550a7375 FB |
379 | return 0; |
380 | } | |
743411b3 | 381 | |
f7ec9437 | 382 | static const struct musb_platform_ops omap2430_ops = { |
f8e9f34f | 383 | .quirks = MUSB_DMA_INVENTRA, |
7f6283ed TL |
384 | #ifdef CONFIG_USB_INVENTRA_DMA |
385 | .dma_init = musbhs_dma_controller_create, | |
386 | .dma_exit = musbhs_dma_controller_destroy, | |
387 | #endif | |
743411b3 FB |
388 | .init = omap2430_musb_init, |
389 | .exit = omap2430_musb_exit, | |
390 | ||
743411b3 | 391 | .set_vbus = omap2430_musb_set_vbus, |
002eda13 HH |
392 | |
393 | .enable = omap2430_musb_enable, | |
394 | .disable = omap2430_musb_disable, | |
8055555f TL |
395 | |
396 | .phy_callback = omap2430_musb_mailbox, | |
743411b3 | 397 | }; |
dc09886b FB |
398 | |
399 | static u64 omap2430_dmamask = DMA_BIT_MASK(32); | |
400 | ||
41ac7b3a | 401 | static int omap2430_probe(struct platform_device *pdev) |
dc09886b | 402 | { |
c1f01be4 | 403 | struct resource musb_resources[3]; |
c1a7d67c | 404 | struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); |
00a0b1d5 | 405 | struct omap_musb_board_data *data; |
dc09886b | 406 | struct platform_device *musb; |
a3cee12a | 407 | struct omap2430_glue *glue; |
00a0b1d5 KVA |
408 | struct device_node *np = pdev->dev.of_node; |
409 | struct musb_hdrc_config *config; | |
606bf4d5 | 410 | int ret = -ENOMEM, val; |
dc09886b | 411 | |
b1183c24 | 412 | glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); |
af1bdfc9 | 413 | if (!glue) |
a3cee12a | 414 | goto err0; |
a3cee12a | 415 | |
2f771164 | 416 | musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); |
dc09886b FB |
417 | if (!musb) { |
418 | dev_err(&pdev->dev, "failed to allocate musb device\n"); | |
2f771164 | 419 | goto err0; |
dc09886b FB |
420 | } |
421 | ||
422 | musb->dev.parent = &pdev->dev; | |
423 | musb->dev.dma_mask = &omap2430_dmamask; | |
424 | musb->dev.coherent_dma_mask = omap2430_dmamask; | |
425 | ||
a3cee12a FB |
426 | glue->dev = &pdev->dev; |
427 | glue->musb = musb; | |
8055555f | 428 | glue->status = MUSB_UNKNOWN; |
8934d3e4 | 429 | glue->control_otghs = ERR_PTR(-ENODEV); |
a3cee12a | 430 | |
00a0b1d5 | 431 | if (np) { |
8934d3e4 RQ |
432 | struct device_node *control_node; |
433 | struct platform_device *control_pdev; | |
434 | ||
00a0b1d5 | 435 | pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); |
af1bdfc9 | 436 | if (!pdata) |
2f771164 | 437 | goto err2; |
00a0b1d5 KVA |
438 | |
439 | data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); | |
af1bdfc9 | 440 | if (!data) |
2f771164 | 441 | goto err2; |
00a0b1d5 KVA |
442 | |
443 | config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); | |
af1bdfc9 | 444 | if (!config) |
2f771164 | 445 | goto err2; |
00a0b1d5 KVA |
446 | |
447 | of_property_read_u32(np, "mode", (u32 *)&pdata->mode); | |
eee44da0 | 448 | of_property_read_u32(np, "interface-type", |
00a0b1d5 | 449 | (u32 *)&data->interface_type); |
eee44da0 KVA |
450 | of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); |
451 | of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); | |
00a0b1d5 | 452 | of_property_read_u32(np, "power", (u32 *)&pdata->power); |
606bf4d5 TL |
453 | |
454 | ret = of_property_read_u32(np, "multipoint", &val); | |
455 | if (!ret && val) | |
456 | config->multipoint = true; | |
00a0b1d5 KVA |
457 | |
458 | pdata->board_data = data; | |
459 | pdata->config = config; | |
00a0b1d5 | 460 | |
8934d3e4 RQ |
461 | control_node = of_parse_phandle(np, "ctrl-module", 0); |
462 | if (control_node) { | |
463 | control_pdev = of_find_device_by_node(control_node); | |
464 | if (!control_pdev) { | |
465 | dev_err(&pdev->dev, "Failed to get control device\n"); | |
466 | ret = -EINVAL; | |
467 | goto err2; | |
468 | } | |
469 | glue->control_otghs = &control_pdev->dev; | |
ca784be3 | 470 | } |
ca784be3 | 471 | } |
f7ec9437 FB |
472 | pdata->platform_ops = &omap2430_ops; |
473 | ||
a3cee12a | 474 | platform_set_drvdata(pdev, glue); |
dc09886b | 475 | |
c9721438 KVA |
476 | /* |
477 | * REVISIT if we ever have two instances of the wrapper, we will be | |
478 | * in big trouble | |
479 | */ | |
480 | _glue = glue; | |
481 | ||
1e5acb8d KVA |
482 | INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work); |
483 | ||
3a0ddc71 | 484 | memset(musb_resources, 0x00, sizeof(*musb_resources) * |
09fc7d22 FB |
485 | ARRAY_SIZE(musb_resources)); |
486 | ||
487 | musb_resources[0].name = pdev->resource[0].name; | |
488 | musb_resources[0].start = pdev->resource[0].start; | |
489 | musb_resources[0].end = pdev->resource[0].end; | |
490 | musb_resources[0].flags = pdev->resource[0].flags; | |
491 | ||
492 | musb_resources[1].name = pdev->resource[1].name; | |
493 | musb_resources[1].start = pdev->resource[1].start; | |
494 | musb_resources[1].end = pdev->resource[1].end; | |
495 | musb_resources[1].flags = pdev->resource[1].flags; | |
496 | ||
c1f01be4 KVA |
497 | musb_resources[2].name = pdev->resource[2].name; |
498 | musb_resources[2].start = pdev->resource[2].start; | |
499 | musb_resources[2].end = pdev->resource[2].end; | |
500 | musb_resources[2].flags = pdev->resource[2].flags; | |
501 | ||
09fc7d22 FB |
502 | ret = platform_device_add_resources(musb, musb_resources, |
503 | ARRAY_SIZE(musb_resources)); | |
dc09886b FB |
504 | if (ret) { |
505 | dev_err(&pdev->dev, "failed to add resources\n"); | |
65b3d52d | 506 | goto err2; |
dc09886b FB |
507 | } |
508 | ||
509 | ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); | |
510 | if (ret) { | |
511 | dev_err(&pdev->dev, "failed to add platform_data\n"); | |
65b3d52d | 512 | goto err2; |
dc09886b FB |
513 | } |
514 | ||
87326e85 | 515 | pm_runtime_enable(glue->dev); |
3006dc8c | 516 | |
dc09886b FB |
517 | ret = platform_device_add(musb); |
518 | if (ret) { | |
519 | dev_err(&pdev->dev, "failed to register musb device\n"); | |
536d599d | 520 | goto err3; |
dc09886b FB |
521 | } |
522 | ||
207b0e1f | 523 | return 0; |
03491761 | 524 | |
536d599d TL |
525 | err3: |
526 | pm_runtime_disable(glue->dev); | |
527 | ||
65b3d52d | 528 | err2: |
b1183c24 | 529 | platform_device_put(musb); |
a3cee12a | 530 | |
dc09886b FB |
531 | err0: |
532 | return ret; | |
533 | } | |
534 | ||
fb4e98ab | 535 | static int omap2430_remove(struct platform_device *pdev) |
dc09886b | 536 | { |
21f77bee | 537 | struct omap2430_glue *glue = platform_get_drvdata(pdev); |
dc09886b | 538 | |
f039df58 | 539 | platform_device_unregister(glue->musb); |
03e43528 | 540 | pm_runtime_disable(glue->dev); |
dc09886b FB |
541 | |
542 | return 0; | |
543 | } | |
544 | ||
c20aebb9 | 545 | #ifdef CONFIG_PM |
c20aebb9 | 546 | |
7acc6197 | 547 | static int omap2430_runtime_suspend(struct device *dev) |
c20aebb9 FB |
548 | { |
549 | struct omap2430_glue *glue = dev_get_drvdata(dev); | |
550 | struct musb *musb = glue_to_musb(glue); | |
551 | ||
a83e17d0 TL |
552 | if (!musb) |
553 | return 0; | |
e25bec16 | 554 | |
a83e17d0 TL |
555 | musb->context.otg_interfsel = musb_readl(musb->mregs, |
556 | OTG_INTERFSEL); | |
557 | ||
558 | omap2430_low_level_exit(musb); | |
c20aebb9 FB |
559 | |
560 | return 0; | |
561 | } | |
562 | ||
7acc6197 | 563 | static int omap2430_runtime_resume(struct device *dev) |
c20aebb9 FB |
564 | { |
565 | struct omap2430_glue *glue = dev_get_drvdata(dev); | |
566 | struct musb *musb = glue_to_musb(glue); | |
c20aebb9 | 567 | |
8f2279d5 | 568 | if (!musb) |
a83e17d0 | 569 | return 0; |
8f2279d5 TL |
570 | |
571 | omap2430_low_level_init(musb); | |
572 | musb_writel(musb->mregs, OTG_INTERFSEL, | |
573 | musb->context.otg_interfsel); | |
c20aebb9 FB |
574 | |
575 | return 0; | |
576 | } | |
577 | ||
c0927fea | 578 | static const struct dev_pm_ops omap2430_pm_ops = { |
7acc6197 HH |
579 | .runtime_suspend = omap2430_runtime_suspend, |
580 | .runtime_resume = omap2430_runtime_resume, | |
c20aebb9 FB |
581 | }; |
582 | ||
583 | #define DEV_PM_OPS (&omap2430_pm_ops) | |
584 | #else | |
585 | #define DEV_PM_OPS NULL | |
586 | #endif | |
587 | ||
00a0b1d5 KVA |
588 | #ifdef CONFIG_OF |
589 | static const struct of_device_id omap2430_id_table[] = { | |
590 | { | |
591 | .compatible = "ti,omap4-musb" | |
592 | }, | |
593 | { | |
594 | .compatible = "ti,omap3-musb" | |
595 | }, | |
596 | {}, | |
597 | }; | |
598 | MODULE_DEVICE_TABLE(of, omap2430_id_table); | |
599 | #endif | |
600 | ||
dc09886b | 601 | static struct platform_driver omap2430_driver = { |
e9e8c85e | 602 | .probe = omap2430_probe, |
7690417d | 603 | .remove = omap2430_remove, |
dc09886b FB |
604 | .driver = { |
605 | .name = "musb-omap2430", | |
c20aebb9 | 606 | .pm = DEV_PM_OPS, |
00a0b1d5 | 607 | .of_match_table = of_match_ptr(omap2430_id_table), |
dc09886b FB |
608 | }, |
609 | }; | |
610 | ||
aec373c1 TL |
611 | module_platform_driver(omap2430_driver); |
612 | ||
dc09886b FB |
613 | MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer"); |
614 | MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); | |
615 | MODULE_LICENSE("GPL v2"); |