projects / linux-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[PATCH] I2C: Drop I2C_DEVNAME and i2c_clientname
[linux-block.git] / drivers / usb / media / w9968cf.c
CommitLineData
1da177e4
LT		 1/***************************************************************************
2 * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip. *
3 * *
4 * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> *
5 * *
6 * - Memory management code from bttv driver by Ralph Metzler, *
7 * Marcus Metzler and Gerd Knorr. *
8 * - I2C interface to kernel, high-level image sensor control routines and *
9 * some symbolic names from OV511 driver by Mark W. McClelland. *
10 * - Low-level I2C fast write function by Piotr Czerczak. *
11 * - Low-level I2C read function by Frederic Jouault. *
12 * *
13 * This program is free software; you can redistribute it and/or modify *
14 * it under the terms of the GNU General Public License as published by *
15 * the Free Software Foundation; either version 2 of the License, or *
16 * (at your option) any later version. *
17 * *
18 * This program is distributed in the hope that it will be useful, *
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
21 * GNU General Public License for more details. *
22 * *
23 * You should have received a copy of the GNU General Public License *
24 * along with this program; if not, write to the Free Software *
25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
26 ***************************************************************************/
27
28#include <linux/version.h>
29#include <linux/module.h>
30#include <linux/kernel.h>
31#include <linux/kmod.h>
32#include <linux/init.h>
33#include <linux/fs.h>
34#include <linux/vmalloc.h>
35#include <linux/slab.h>
36#include <linux/mm.h>
37#include <linux/string.h>
38#include <linux/errno.h>
39#include <linux/sched.h>
40#include <linux/ioctl.h>
41#include <linux/delay.h>
42#include <linux/stddef.h>
43#include <asm/page.h>
44#include <asm/uaccess.h>
45#include <linux/page-flags.h>
46#include <linux/moduleparam.h>
47
48#include "w9968cf.h"
49#include "w9968cf_decoder.h"
50
51
52
53/****************************************************************************
54 * Module macros and parameters *
55 ****************************************************************************/
56
57MODULE_DEVICE_TABLE(usb, winbond_id_table);
58
59MODULE_AUTHOR(W9968CF_MODULE_AUTHOR" "W9968CF_AUTHOR_EMAIL);
60MODULE_DESCRIPTION(W9968CF_MODULE_NAME);
61MODULE_VERSION(W9968CF_MODULE_VERSION);
62MODULE_LICENSE(W9968CF_MODULE_LICENSE);
63MODULE_SUPPORTED_DEVICE("Video");
64
65static int ovmod_load = W9968CF_OVMOD_LOAD;
66static int vppmod_load = W9968CF_VPPMOD_LOAD;
67static unsigned short simcams = W9968CF_SIMCAMS;
68static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/
69static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] =
70 W9968CF_PACKET_SIZE};
71static unsigned short max_buffers[] = {[0 ... W9968CF_MAX_DEVICES-1] =
72 W9968CF_BUFFERS};
73static int double_buffer[] = {[0 ... W9968CF_MAX_DEVICES-1] =
74 W9968CF_DOUBLE_BUFFER};
75static int clamping[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLAMPING};
76static unsigned short filter_type[]= {[0 ... W9968CF_MAX_DEVICES-1] =
77 W9968CF_FILTER_TYPE};
78static int largeview[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_LARGEVIEW};
79static unsigned short decompression[] = {[0 ... W9968CF_MAX_DEVICES-1] =
80 W9968CF_DECOMPRESSION};
81static int upscaling[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_UPSCALING};
82static unsigned short force_palette[] = {[0 ... W9968CF_MAX_DEVICES-1] = 0};
83static int force_rgb[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_FORCE_RGB};
84static int autobright[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOBRIGHT};
85static int autoexp[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOEXP};
86static unsigned short lightfreq[] = {[0 ... W9968CF_MAX_DEVICES-1] =
87 W9968CF_LIGHTFREQ};
88static int bandingfilter[] = {[0 ... W9968CF_MAX_DEVICES-1]=
89 W9968CF_BANDINGFILTER};
90static short clockdiv[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLOCKDIV};
91static int backlight[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_BACKLIGHT};
92static int mirror[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_MIRROR};
93static int monochrome[] = {[0 ... W9968CF_MAX_DEVICES-1]=W9968CF_MONOCHROME};
94static unsigned int brightness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
95 W9968CF_BRIGHTNESS};
96static unsigned int hue[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_HUE};
97static unsigned int colour[]={[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_COLOUR};
98static unsigned int contrast[] = {[0 ... W9968CF_MAX_DEVICES-1] =
99 W9968CF_CONTRAST};
100static unsigned int whiteness[] = {[0 ... W9968CF_MAX_DEVICES-1] =
101 W9968CF_WHITENESS};
102#ifdef W9968CF_DEBUG
103static unsigned short debug = W9968CF_DEBUG_LEVEL;
104static int specific_debug = W9968CF_SPECIFIC_DEBUG;
105#endif
106
107static unsigned int param_nv[24]; /* number of values per parameter */
108
109#ifdef CONFIG_KMOD
110module_param(ovmod_load, bool, 0644);
111module_param(vppmod_load, bool, 0444);
112#endif
113module_param(simcams, ushort, 0644);
114module_param_array(video_nr, short, &param_nv[0], 0444);
115module_param_array(packet_size, uint, &param_nv[1], 0444);
116module_param_array(max_buffers, ushort, &param_nv[2], 0444);
117module_param_array(double_buffer, bool, &param_nv[3], 0444);
118module_param_array(clamping, bool, &param_nv[4], 0444);
119module_param_array(filter_type, ushort, &param_nv[5], 0444);
120module_param_array(largeview, bool, &param_nv[6], 0444);
121module_param_array(decompression, ushort, &param_nv[7], 0444);
122module_param_array(upscaling, bool, &param_nv[8], 0444);
123module_param_array(force_palette, ushort, &param_nv[9], 0444);
124module_param_array(force_rgb, ushort, &param_nv[10], 0444);
125module_param_array(autobright, bool, &param_nv[11], 0444);
126module_param_array(autoexp, bool, &param_nv[12], 0444);
127module_param_array(lightfreq, ushort, &param_nv[13], 0444);
128module_param_array(bandingfilter, bool, &param_nv[14], 0444);
129module_param_array(clockdiv, short, &param_nv[15], 0444);
130module_param_array(backlight, bool, &param_nv[16], 0444);
131module_param_array(mirror, bool, &param_nv[17], 0444);
132module_param_array(monochrome, bool, &param_nv[18], 0444);
133module_param_array(brightness, uint, &param_nv[19], 0444);
134module_param_array(hue, uint, &param_nv[20], 0444);
135module_param_array(colour, uint, &param_nv[21], 0444);
136module_param_array(contrast, uint, &param_nv[22], 0444);
137module_param_array(whiteness, uint, &param_nv[23], 0444);
138#ifdef W9968CF_DEBUG
139module_param(debug, ushort, 0644);
140module_param(specific_debug, bool, 0644);
141#endif
142
143#ifdef CONFIG_KMOD
144MODULE_PARM_DESC(ovmod_load,
145 "\n<0|1> Automatic 'ovcamchip' module loading."
146 "\n0 disabled, 1 enabled."
147 "\nIf enabled,'insmod' searches for the required 'ovcamchip'"
148 "\nmodule in the system, according to its configuration, and"
149 "\nattempts to load that module automatically. This action is"
150 "\nperformed once as soon as the 'w9968cf' module is loaded"
151 "\ninto memory."
152 "\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"."
153 "\n");
154MODULE_PARM_DESC(vppmod_load,
155 "\n<0|1> Automatic 'w9968cf-vpp' module loading."
156 "\n0 disabled, 1 enabled."
157 "\nIf enabled, every time an application attempts to open a"
158 "\ncamera, 'insmod' searches for the video post-processing"
159 "\nmodule in the system and loads it automatically (if"
160 "\npresent). The optional 'w9968cf-vpp' module adds extra"
161 "\n image manipulation functions to the 'w9968cf' module,like"
162 "\nsoftware up-scaling,colour conversions and video decoding"
163 "\nfor very high frame rates."
164 "\nDefault value is "__MODULE_STRING(W9968CF_VPPMOD_LOAD)"."
165 "\n");
166#endif
167MODULE_PARM_DESC(simcams,
168 "\n<n> Number of cameras allowed to stream simultaneously."
169 "\nn may vary from 0 to "
170 __MODULE_STRING(W9968CF_MAX_DEVICES)"."
171 "\nDefault value is "__MODULE_STRING(W9968CF_SIMCAMS)"."
172 "\n");
173MODULE_PARM_DESC(video_nr,
174 "\n<-1|n[,...]> Specify V4L minor mode number."
175 "\n -1 = use next available (default)"
176 "\n n = use minor number n (integer >= 0)"
177 "\nYou can specify up to "__MODULE_STRING(W9968CF_MAX_DEVICES)
178 " cameras this way."
179 "\nFor example:"
180 "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
181 "\nthe second camera and use auto for the first"
182 "\none and for every other camera."
183 "\n");
184MODULE_PARM_DESC(packet_size,
185 "\n<n[,...]> Specify the maximum data payload"
186 "\nsize in bytes for alternate settings, for each device."
187 "\nn is scaled between 63 and 1023 "
188 "(default is "__MODULE_STRING(W9968CF_PACKET_SIZE)")."
189 "\n");
190MODULE_PARM_DESC(max_buffers,
191 "\n<n[,...]> For advanced users."
192 "\nSpecify the maximum number of video frame buffers"
193 "\nto allocate for each device, from 2 to "
194 __MODULE_STRING(W9968CF_MAX_BUFFERS)
195 ". (default is "__MODULE_STRING(W9968CF_BUFFERS)")."
196 "\n");
197MODULE_PARM_DESC(double_buffer,
198 "\n<0|1[,...]> "
199 "Hardware double buffering: 0 disabled, 1 enabled."
200 "\nIt should be enabled if you want smooth video output: if"
201 "\nyou obtain out of sync. video, disable it, or try to"
202 "\ndecrease the 'clockdiv' module parameter value."
203 "\nDefault value is "__MODULE_STRING(W9968CF_DOUBLE_BUFFER)
204 " for every device."
205 "\n");
206MODULE_PARM_DESC(clamping,
207 "\n<0|1[,...]> Video data clamping: 0 disabled, 1 enabled."
208 "\nDefault value is "__MODULE_STRING(W9968CF_CLAMPING)
209 " for every device."
210 "\n");
211MODULE_PARM_DESC(filter_type,
212 "\n<0|1|2[,...]> Video filter type."
213 "\n0 none, 1 (1-2-1) 3-tap filter, "
214 "2 (2-3-6-3-2) 5-tap filter."
215 "\nDefault value is "__MODULE_STRING(W9968CF_FILTER_TYPE)
216 " for every device."
217 "\nThe filter is used to reduce noise and aliasing artifacts"
218 "\nproduced by the CCD or CMOS image sensor, and the scaling"
219 " process."
220 "\n");
221MODULE_PARM_DESC(largeview,
222 "\n<0|1[,...]> Large view: 0 disabled, 1 enabled."
223 "\nDefault value is "__MODULE_STRING(W9968CF_LARGEVIEW)
224 " for every device."
225 "\n");
226MODULE_PARM_DESC(upscaling,
227 "\n<0|1[,...]> Software scaling (for non-compressed video):"
228 "\n0 disabled, 1 enabled."
229 "\nDisable it if you have a slow CPU or you don't have"
230 " enough memory."
231 "\nDefault value is "__MODULE_STRING(W9968CF_UPSCALING)
232 " for every device."
233 "\nIf 'w9968cf-vpp' is not present, this parameter is"
234 " set to 0."
235 "\n");
236MODULE_PARM_DESC(decompression,
237 "\n<0|1|2[,...]> Software video decompression:"
238 "\n- 0 disables decompression (doesn't allow formats needing"
239 " decompression)"
240 "\n- 1 forces decompression (allows formats needing"
241 " decompression only);"
242 "\n- 2 allows any permitted formats."
243 "\nFormats supporting compressed video are YUV422P and"
244 " YUV420P/YUV420 "
245 "\nin any resolutions where both width and height are "
246 "a multiple of 16."
247 "\nDefault value is "__MODULE_STRING(W9968CF_DECOMPRESSION)
248 " for every device."
249 "\nIf 'w9968cf-vpp' is not present, forcing decompression is "
250 "\nnot allowed; in this case this parameter is set to 2."
251 "\n");
252MODULE_PARM_DESC(force_palette,
253 "\n<0"
254 "|" __MODULE_STRING(VIDEO_PALETTE_UYVY)
255 "|" __MODULE_STRING(VIDEO_PALETTE_YUV420)
256 "|" __MODULE_STRING(VIDEO_PALETTE_YUV422P)
257 "|" __MODULE_STRING(VIDEO_PALETTE_YUV420P)
258 "|" __MODULE_STRING(VIDEO_PALETTE_YUYV)
259 "|" __MODULE_STRING(VIDEO_PALETTE_YUV422)
260 "|" __MODULE_STRING(VIDEO_PALETTE_GREY)
261 "|" __MODULE_STRING(VIDEO_PALETTE_RGB555)
262 "|" __MODULE_STRING(VIDEO_PALETTE_RGB565)
263 "|" __MODULE_STRING(VIDEO_PALETTE_RGB24)
264 "|" __MODULE_STRING(VIDEO_PALETTE_RGB32)
265 "[,...]>"
266 " Force picture palette."
267 "\nIn order:"
268 "\n- 0 allows any of the following formats:"
269 "\n- UYVY 16 bpp - Original video, compression disabled"
270 "\n- YUV420 12 bpp - Original video, compression enabled"
271 "\n- YUV422P 16 bpp - Original video, compression enabled"
272 "\n- YUV420P 12 bpp - Original video, compression enabled"
273 "\n- YUVY 16 bpp - Software conversion from UYVY"
274 "\n- YUV422 16 bpp - Software conversion from UYVY"
275 "\n- GREY 8 bpp - Software conversion from UYVY"
276 "\n- RGB555 16 bpp - Software conversion from UYVY"
277 "\n- RGB565 16 bpp - Software conversion from UYVY"
278 "\n- RGB24 24 bpp - Software conversion from UYVY"
279 "\n- RGB32 32 bpp - Software conversion from UYVY"
280 "\nWhen not 0, this parameter will override 'decompression'."
281 "\nDefault value is 0 for every device."
282 "\nInitial palette is "
283 __MODULE_STRING(W9968CF_PALETTE_DECOMP_ON)"."
284 "\nIf 'w9968cf-vpp' is not present, this parameter is"
285 " set to 9 (UYVY)."
286 "\n");
287MODULE_PARM_DESC(force_rgb,
288 "\n<0|1[,...]> Read RGB video data instead of BGR:"
289 "\n 1 = use RGB component ordering."
290 "\n 0 = use BGR component ordering."
291 "\nThis parameter has effect when using RGBX palettes only."
292 "\nDefault value is "__MODULE_STRING(W9968CF_FORCE_RGB)
293 " for every device."
294 "\n");
295MODULE_PARM_DESC(autobright,
296 "\n<0|1[,...]> Image sensor automatically changes brightness:"
297 "\n 0 = no, 1 = yes"
298 "\nDefault value is "__MODULE_STRING(W9968CF_AUTOBRIGHT)
299 " for every device."
300 "\n");
301MODULE_PARM_DESC(autoexp,
302 "\n<0|1[,...]> Image sensor automatically changes exposure:"
303 "\n 0 = no, 1 = yes"
304 "\nDefault value is "__MODULE_STRING(W9968CF_AUTOEXP)
305 " for every device."
306 "\n");
307MODULE_PARM_DESC(lightfreq,
308 "\n<50|60[,...]> Light frequency in Hz:"
309 "\n 50 for European and Asian lighting,"
310 " 60 for American lighting."
311 "\nDefault value is "__MODULE_STRING(W9968CF_LIGHTFREQ)
312 " for every device."
313 "\n");
314MODULE_PARM_DESC(bandingfilter,
315 "\n<0|1[,...]> Banding filter to reduce effects of"
316 " fluorescent lighting:"
317 "\n 0 disabled, 1 enabled."
318 "\nThis filter tries to reduce the pattern of horizontal"
319 "\nlight/dark bands caused by some (usually fluorescent)"
320 " lighting."
321 "\nDefault value is "__MODULE_STRING(W9968CF_BANDINGFILTER)
322 " for every device."
323 "\n");
324MODULE_PARM_DESC(clockdiv,
325 "\n<-1|n[,...]> "
326 "Force pixel clock divisor to a specific value (for experts):"
327 "\n n may vary from 0 to 127."
328 "\n -1 for automatic value."
329 "\nSee also the 'double_buffer' module parameter."
330 "\nDefault value is "__MODULE_STRING(W9968CF_CLOCKDIV)
331 " for every device."
332 "\n");
333MODULE_PARM_DESC(backlight,
334 "\n<0|1[,...]> Objects are lit from behind:"
335 "\n 0 = no, 1 = yes"
336 "\nDefault value is "__MODULE_STRING(W9968CF_BACKLIGHT)
337 " for every device."
338 "\n");
339MODULE_PARM_DESC(mirror,
340 "\n<0|1[,...]> Reverse image horizontally:"
341 "\n 0 = no, 1 = yes"
342 "\nDefault value is "__MODULE_STRING(W9968CF_MIRROR)
343 " for every device."
344 "\n");
345MODULE_PARM_DESC(monochrome,
346 "\n<0|1[,...]> Use image sensor as monochrome sensor:"
347 "\n 0 = no, 1 = yes"
348 "\nNot all the sensors support monochrome color."
349 "\nDefault value is "__MODULE_STRING(W9968CF_MONOCHROME)
350 " for every device."
351 "\n");
352MODULE_PARM_DESC(brightness,
353 "\n<n[,...]> Set picture brightness (0-65535)."
354 "\nDefault value is "__MODULE_STRING(W9968CF_BRIGHTNESS)
355 " for every device."
356 "\nThis parameter has no effect if 'autobright' is enabled."
357 "\n");
358MODULE_PARM_DESC(hue,
359 "\n<n[,...]> Set picture hue (0-65535)."
360 "\nDefault value is "__MODULE_STRING(W9968CF_HUE)
361 " for every device."
362 "\n");
363MODULE_PARM_DESC(colour,
364 "\n<n[,...]> Set picture saturation (0-65535)."
365 "\nDefault value is "__MODULE_STRING(W9968CF_COLOUR)
366 " for every device."
367 "\n");
368MODULE_PARM_DESC(contrast,
369 "\n<n[,...]> Set picture contrast (0-65535)."
370 "\nDefault value is "__MODULE_STRING(W9968CF_CONTRAST)
371 " for every device."
372 "\n");
373MODULE_PARM_DESC(whiteness,
374 "\n<n[,...]> Set picture whiteness (0-65535)."
375 "\nDefault value is "__MODULE_STRING(W9968CF_WHITENESS)
376 " for every device."
377 "\n");
378#ifdef W9968CF_DEBUG
379MODULE_PARM_DESC(debug,
380 "\n<n> Debugging information level, from 0 to 6:"
381 "\n0 = none (use carefully)"
382 "\n1 = critical errors"
383 "\n2 = significant informations"
384 "\n3 = configuration or general messages"
385 "\n4 = warnings"
386 "\n5 = called functions"
387 "\n6 = function internals"
388 "\nLevel 5 and 6 are useful for testing only, when only "
389 "one device is used."
390 "\nDefault value is "__MODULE_STRING(W9968CF_DEBUG_LEVEL)"."
391 "\n");
392MODULE_PARM_DESC(specific_debug,
393 "\n<0|1> Enable or disable specific debugging messages:"
394 "\n0 = print messages concerning every level"
395 " <= 'debug' level."
396 "\n1 = print messages concerning the level"
397 " indicated by 'debug'."
398 "\nDefault value is "
399 __MODULE_STRING(W9968CF_SPECIFIC_DEBUG)"."
400 "\n");
401#endif /* W9968CF_DEBUG */
402
403
404
405/****************************************************************************
406 * Some prototypes *
407 ****************************************************************************/
408
409/* Video4linux interface */
410static struct file_operations w9968cf_fops;
411static int w9968cf_open(struct inode*, struct file*);
412static int w9968cf_release(struct inode*, struct file*);
413static int w9968cf_mmap(struct file*, struct vm_area_struct*);
414static int w9968cf_ioctl(struct inode*, struct file*, unsigned, unsigned long);
415static ssize_t w9968cf_read(struct file*, char __user *, size_t, loff_t*);
416static int w9968cf_v4l_ioctl(struct inode*, struct file*, unsigned int,
417 void __user *);
418
419/* USB-specific */
420static int w9968cf_start_transfer(struct w9968cf_device*);
421static int w9968cf_stop_transfer(struct w9968cf_device*);
422static int w9968cf_write_reg(struct w9968cf_device*, u16 value, u16 index);
423static int w9968cf_read_reg(struct w9968cf_device*, u16 index);
424static int w9968cf_write_fsb(struct w9968cf_device*, u16* data);
425static int w9968cf_write_sb(struct w9968cf_device*, u16 value);
426static int w9968cf_read_sb(struct w9968cf_device*);
427static int w9968cf_upload_quantizationtables(struct w9968cf_device*);
428static void w9968cf_urb_complete(struct urb *urb, struct pt_regs *regs);
429
430/* Low-level I2C (SMBus) I/O */
431static int w9968cf_smbus_start(struct w9968cf_device*);
432static int w9968cf_smbus_stop(struct w9968cf_device*);
433static int w9968cf_smbus_write_byte(struct w9968cf_device*, u8 v);
434static int w9968cf_smbus_read_byte(struct w9968cf_device*, u8* v);
435static int w9968cf_smbus_write_ack(struct w9968cf_device*);
436static int w9968cf_smbus_read_ack(struct w9968cf_device*);
437static int w9968cf_smbus_refresh_bus(struct w9968cf_device*);
438static int w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
439 u16 address, u8* value);
440static int w9968cf_i2c_adap_read_byte_data(struct w9968cf_device*, u16 address,
441 u8 subaddress, u8* value);
442static int w9968cf_i2c_adap_write_byte(struct w9968cf_device*,
443 u16 address, u8 subaddress);
444static int w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device*,
445 u16 address, u8 subaddress,
446 u8 value);
447
448/* I2C interface to kernel */
449static int w9968cf_i2c_init(struct w9968cf_device*);
450static int w9968cf_i2c_smbus_xfer(struct i2c_adapter*, u16 addr,
451 unsigned short flags, char read_write,
452 u8 command, int size, union i2c_smbus_data*);
453static u32 w9968cf_i2c_func(struct i2c_adapter*);
454static int w9968cf_i2c_attach_inform(struct i2c_client*);
455static int w9968cf_i2c_detach_inform(struct i2c_client*);
456static int w9968cf_i2c_control(struct i2c_adapter*, unsigned int cmd,
457 unsigned long arg);
458
459/* Memory management */
460static void* rvmalloc(unsigned long size);
461static void rvfree(void *mem, unsigned long size);
462static void w9968cf_deallocate_memory(struct w9968cf_device*);
463static int w9968cf_allocate_memory(struct w9968cf_device*);
464
465/* High-level image sensor control functions */
466static int w9968cf_sensor_set_control(struct w9968cf_device*,int cid,int val);
467static int w9968cf_sensor_get_control(struct w9968cf_device*,int cid,int *val);
468static int w9968cf_sensor_cmd(struct w9968cf_device*,
469 unsigned int cmd, void *arg);
470static int w9968cf_sensor_init(struct w9968cf_device*);
471static int w9968cf_sensor_update_settings(struct w9968cf_device*);
472static int w9968cf_sensor_get_picture(struct w9968cf_device*);
473static int w9968cf_sensor_update_picture(struct w9968cf_device*,
474 struct video_picture pict);
475
476/* Other helper functions */
477static void w9968cf_configure_camera(struct w9968cf_device*,struct usb_device*,
478 enum w9968cf_model_id,
479 const unsigned short dev_nr);
480static void w9968cf_adjust_configuration(struct w9968cf_device*);
481static int w9968cf_turn_on_led(struct w9968cf_device*);
482static int w9968cf_init_chip(struct w9968cf_device*);
483static inline u16 w9968cf_valid_palette(u16 palette);
484static inline u16 w9968cf_valid_depth(u16 palette);
485static inline u8 w9968cf_need_decompression(u16 palette);
486static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture);
487static int w9968cf_set_window(struct w9968cf_device*, struct video_window);
488static int w9968cf_postprocess_frame(struct w9968cf_device*,
489 struct w9968cf_frame_t*);
490static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h);
491static void w9968cf_init_framelist(struct w9968cf_device*);
492static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num);
493static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
494static void w9968cf_release_resources(struct w9968cf_device*);
495
496/* Intermodule communication */
497static int w9968cf_vppmod_detect(struct w9968cf_device*);
498static void w9968cf_vppmod_release(struct w9968cf_device*);
499
500
501
502/****************************************************************************
503 * Symbolic names *
504 ****************************************************************************/
505
506/* Used to represent a list of values and their respective symbolic names */
507struct w9968cf_symbolic_list {
508 const int num;
509 const char *name;
510};
511
512/*--------------------------------------------------------------------------
513 Returns the name of the matching element in the symbolic_list array. The
514 end of the list must be marked with an element that has a NULL name.
515 --------------------------------------------------------------------------*/
516static inline const char *
517symbolic(struct w9968cf_symbolic_list list[], const int num)
518{
519 int i;
520
521 for (i = 0; list[i].name != NULL; i++)
522 if (list[i].num == num)
523 return (list[i].name);
524
525 return "Unknown";
526}
527
528static struct w9968cf_symbolic_list camlist[] = {
529 { W9968CF_MOD_GENERIC, "W996[87]CF JPEG USB Dual Mode Camera" },
530 { W9968CF_MOD_CLVBWGP, "Creative Labs Video Blaster WebCam Go Plus" },
531
532 /* Other cameras (having the same descriptors as Generic W996[87]CF) */
533 { W9968CF_MOD_ADPVDMA, "Aroma Digi Pen VGA Dual Mode ADG-5000" },
534 { W9986CF_MOD_AAU, "AVerMedia AVerTV USB" },
535 { W9968CF_MOD_CLVBWG, "Creative Labs Video Blaster WebCam Go" },
536 { W9968CF_MOD_LL, "Lebon LDC-035A" },
537 { W9968CF_MOD_EEEMC, "Ezonics EZ-802 EZMega Cam" },
538 { W9968CF_MOD_OOE, "OmniVision OV8610-EDE" },
539 { W9968CF_MOD_ODPVDMPC, "OPCOM Digi Pen VGA Dual Mode Pen Camera" },
540 { W9968CF_MOD_PDPII, "Pretec Digi Pen-II" },
541 { W9968CF_MOD_PDP480, "Pretec DigiPen-480" },
542
543 { -1, NULL }
544};
545
546static struct w9968cf_symbolic_list senlist[] = {
547 { CC_OV76BE, "OV76BE" },
548 { CC_OV7610, "OV7610" },
549 { CC_OV7620, "OV7620" },
550 { CC_OV7620AE, "OV7620AE" },
551 { CC_OV6620, "OV6620" },
552 { CC_OV6630, "OV6630" },
553 { CC_OV6630AE, "OV6630AE" },
554 { CC_OV6630AF, "OV6630AF" },
555 { -1, NULL }
556};
557
558/* Video4Linux1 palettes */
559static struct w9968cf_symbolic_list v4l1_plist[] = {
560 { VIDEO_PALETTE_GREY, "GREY" },
561 { VIDEO_PALETTE_HI240, "HI240" },
562 { VIDEO_PALETTE_RGB565, "RGB565" },
563 { VIDEO_PALETTE_RGB24, "RGB24" },
564 { VIDEO_PALETTE_RGB32, "RGB32" },
565 { VIDEO_PALETTE_RGB555, "RGB555" },
566 { VIDEO_PALETTE_YUV422, "YUV422" },
567 { VIDEO_PALETTE_YUYV, "YUYV" },
568 { VIDEO_PALETTE_UYVY, "UYVY" },
569 { VIDEO_PALETTE_YUV420, "YUV420" },
570 { VIDEO_PALETTE_YUV411, "YUV411" },
571 { VIDEO_PALETTE_RAW, "RAW" },
572 { VIDEO_PALETTE_YUV422P, "YUV422P" },
573 { VIDEO_PALETTE_YUV411P, "YUV411P" },
574 { VIDEO_PALETTE_YUV420P, "YUV420P" },
575 { VIDEO_PALETTE_YUV410P, "YUV410P" },
576 { -1, NULL }
577};
578
579/* Decoder error codes: */
580static struct w9968cf_symbolic_list decoder_errlist[] = {
581 { W9968CF_DEC_ERR_CORRUPTED_DATA, "Corrupted data" },
582 { W9968CF_DEC_ERR_BUF_OVERFLOW, "Buffer overflow" },
583 { W9968CF_DEC_ERR_NO_SOI, "SOI marker not found" },
584 { W9968CF_DEC_ERR_NO_SOF0, "SOF0 marker not found" },
585 { W9968CF_DEC_ERR_NO_SOS, "SOS marker not found" },
586 { W9968CF_DEC_ERR_NO_EOI, "EOI marker not found" },
587 { -1, NULL }
588};
589
590/* URB error codes: */
591static struct w9968cf_symbolic_list urb_errlist[] = {
592 { -ENOMEM, "No memory for allocation of internal structures" },
593 { -ENOSPC, "The host controller's bandwidth is already consumed" },
594 { -ENOENT, "URB was canceled by unlink_urb" },
595 { -EXDEV, "ISO transfer only partially completed" },
596 { -EAGAIN, "Too match scheduled for the future" },
597 { -ENXIO, "URB already queued" },
598 { -EFBIG, "Too much ISO frames requested" },
599 { -ENOSR, "Buffer error (overrun)" },
600 { -EPIPE, "Specified endpoint is stalled (device not responding)"},
601 { -EOVERFLOW, "Babble (bad cable?)" },
602 { -EPROTO, "Bit-stuff error (bad cable?)" },
603 { -EILSEQ, "CRC/Timeout" },
604 { -ETIMEDOUT, "NAK (device does not respond)" },
605 { -1, NULL }
606};
607
608
609
610/****************************************************************************
611 * Memory management functions *
612 ****************************************************************************/
613static void* rvmalloc(unsigned long size)
614{
615 void* mem;
616 unsigned long adr;
617
618 size = PAGE_ALIGN(size);
619 mem = vmalloc_32(size);
620 if (!mem)
621 return NULL;
622
623 memset(mem, 0, size); /* Clear the ram out, no junk to the user */
624 adr = (unsigned long) mem;
625 while (size > 0) {
626 SetPageReserved(vmalloc_to_page((void *)adr));
627 adr += PAGE_SIZE;
628 size -= PAGE_SIZE;
629 }
630
631 return mem;
632}
633
634
635static void rvfree(void* mem, unsigned long size)
636{
637 unsigned long adr;
638
639 if (!mem)
640 return;
641
642 adr = (unsigned long) mem;
643 while ((long) size > 0) {
644 ClearPageReserved(vmalloc_to_page((void *)adr));
645 adr += PAGE_SIZE;
646 size -= PAGE_SIZE;
647 }
648 vfree(mem);
649}
650
651
652/*--------------------------------------------------------------------------
653 Deallocate previously allocated memory.
654 --------------------------------------------------------------------------*/
655static void w9968cf_deallocate_memory(struct w9968cf_device* cam)
656{
657 u8 i;
658
659 /* Free the isochronous transfer buffers */
660 for (i = 0; i < W9968CF_URBS; i++) {
661 kfree(cam->transfer_buffer[i]);
662 cam->transfer_buffer[i] = NULL;
663 }
664
665 /* Free temporary frame buffer */
666 if (cam->frame_tmp.buffer) {
667 rvfree(cam->frame_tmp.buffer, cam->frame_tmp.size);
668 cam->frame_tmp.buffer = NULL;
669 }
670
671 /* Free helper buffer */
672 if (cam->frame_vpp.buffer) {
673 rvfree(cam->frame_vpp.buffer, cam->frame_vpp.size);
674 cam->frame_vpp.buffer = NULL;
675 }
676
677 /* Free video frame buffers */
678 if (cam->frame[0].buffer) {
679 rvfree(cam->frame[0].buffer, cam->nbuffers*cam->frame[0].size);
680 cam->frame[0].buffer = NULL;
681 }
682
683 cam->nbuffers = 0;
684
685 DBG(5, "Memory successfully deallocated")
686}
687
688
689/*--------------------------------------------------------------------------
690 Allocate memory buffers for USB transfers and video frames.
691 This function is called by open() only.
692 Return 0 on success, a negative number otherwise.
693 --------------------------------------------------------------------------*/
694static int w9968cf_allocate_memory(struct w9968cf_device* cam)
695{
696 const u16 p_size = wMaxPacketSize[cam->altsetting-1];
697 void* buff = NULL;
698 unsigned long hw_bufsize, vpp_bufsize;
699 u8 i, bpp;
700
701 /* NOTE: Deallocation is done elsewhere in case of error */
702
703 /* Calculate the max amount of raw data per frame from the device */
704 hw_bufsize = cam->maxwidth*cam->maxheight*2;
705
706 /* Calculate the max buf. size needed for post-processing routines */
707 bpp = (w9968cf_vpp) ? 4 : 2;
708 if (cam->upscaling)
709 vpp_bufsize = max(W9968CF_MAX_WIDTH*W9968CF_MAX_HEIGHT*bpp,
710 cam->maxwidth*cam->maxheight*bpp);
711 else
712 vpp_bufsize = cam->maxwidth*cam->maxheight*bpp;
713
714 /* Allocate memory for the isochronous transfer buffers */
715 for (i = 0; i < W9968CF_URBS; i++) {
716 if (!(cam->transfer_buffer[i] =
717 kmalloc(W9968CF_ISO_PACKETS*p_size, GFP_KERNEL))) {
718 DBG(1, "Couldn't allocate memory for the isochronous "
719 "transfer buffers (%u bytes)",
720 p_size * W9968CF_ISO_PACKETS)
721 return -ENOMEM;
722 }
723 memset(cam->transfer_buffer[i], 0, W9968CF_ISO_PACKETS*p_size);
724 }
725
726 /* Allocate memory for the temporary frame buffer */
727 if (!(cam->frame_tmp.buffer = rvmalloc(hw_bufsize))) {
728 DBG(1, "Couldn't allocate memory for the temporary "
729 "video frame buffer (%lu bytes)", hw_bufsize)
730 return -ENOMEM;
731 }
732 cam->frame_tmp.size = hw_bufsize;
733 cam->frame_tmp.number = -1;
734
735 /* Allocate memory for the helper buffer */
736 if (w9968cf_vpp) {
737 if (!(cam->frame_vpp.buffer = rvmalloc(vpp_bufsize))) {
738 DBG(1, "Couldn't allocate memory for the helper buffer"
739 " (%lu bytes)", vpp_bufsize)
740 return -ENOMEM;
741 }
742 cam->frame_vpp.size = vpp_bufsize;
743 } else
744 cam->frame_vpp.buffer = NULL;
745
746 /* Allocate memory for video frame buffers */
747 cam->nbuffers = cam->max_buffers;
748 while (cam->nbuffers >= 2) {
749 if ((buff = rvmalloc(cam->nbuffers * vpp_bufsize)))
750 break;
751 else
752 cam->nbuffers--;
753 }
754
755 if (!buff) {
756 DBG(1, "Couldn't allocate memory for the video frame buffers")
757 cam->nbuffers = 0;
758 return -ENOMEM;
759 }
760
761 if (cam->nbuffers != cam->max_buffers)
762 DBG(2, "Couldn't allocate memory for %u video frame buffers. "
763 "Only memory for %u buffers has been allocated",
764 cam->max_buffers, cam->nbuffers)
765
766 for (i = 0; i < cam->nbuffers; i++) {
767 cam->frame[i].buffer = buff + i*vpp_bufsize;
768 cam->frame[i].size = vpp_bufsize;
769 cam->frame[i].number = i;
770 /* Circular list */
771 if (i != cam->nbuffers-1)
772 cam->frame[i].next = &cam->frame[i+1];
773 else
774 cam->frame[i].next = &cam->frame[0];
775 cam->frame[i].status = F_UNUSED;
776 }
777
778 DBG(5, "Memory successfully allocated")
779 return 0;
780}
781
782
783
784/****************************************************************************
785 * USB-specific functions *
786 ****************************************************************************/
787
788/*--------------------------------------------------------------------------
789 This is an handler function which is called after the URBs are completed.
790 It collects multiple data packets coming from the camera by putting them
791 into frame buffers: one or more zero data length data packets are used to
792 mark the end of a video frame; the first non-zero data packet is the start
793 of the next video frame; if an error is encountered in a packet, the entire
794 video frame is discarded and grabbed again.
795 If there are no requested frames in the FIFO list, packets are collected into
796 a temporary buffer.
797 --------------------------------------------------------------------------*/
798static void w9968cf_urb_complete(struct urb *urb, struct pt_regs *regs)
799{
800 struct w9968cf_device* cam = (struct w9968cf_device*)urb->context;
801 struct w9968cf_frame_t** f;
802 unsigned int len, status;
803 void* pos;
804 u8 i;
805 int err = 0;
806
807 if ((!cam->streaming) || cam->disconnected) {
808 DBG(4, "Got interrupt, but not streaming")
809 return;
810 }
811
812 /* "(*f)" will be used instead of "cam->frame_current" */
813 f = &cam->frame_current;
814
815 /* If a frame has been requested and we are grabbing into
816 the temporary frame, we'll switch to that requested frame */
817 if ((*f) == &cam->frame_tmp && *cam->requested_frame) {
818 if (cam->frame_tmp.status == F_GRABBING) {
819 w9968cf_pop_frame(cam, &cam->frame_current);
820 (*f)->status = F_GRABBING;
821 (*f)->length = cam->frame_tmp.length;
822 memcpy((*f)->buffer, cam->frame_tmp.buffer,
823 (*f)->length);
824 DBG(6, "Switched from temp. frame to frame #%d",
825 (*f)->number)
826 }
827 }
828
829 for (i = 0; i < urb->number_of_packets; i++) {
830 len = urb->iso_frame_desc[i].actual_length;
831 status = urb->iso_frame_desc[i].status;
832 pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
833
834 if (status && len != 0) {
835 DBG(4, "URB failed, error in data packet "
836 "(error #%u, %s)",
837 status, symbolic(urb_errlist, status))
838 (*f)->status = F_ERROR;
839 continue;
840 }
841
842 if (len) { /* start of frame */
843
844 if ((*f)->status == F_UNUSED) {
845 (*f)->status = F_GRABBING;
846 (*f)->length = 0;
847 }
848
849 /* Buffer overflows shouldn't happen, however...*/
850 if ((*f)->length + len > (*f)->size) {
851 DBG(4, "Buffer overflow: bad data packets")
852 (*f)->status = F_ERROR;
853 }
854
855 if ((*f)->status == F_GRABBING) {
856 memcpy((*f)->buffer + (*f)->length, pos, len);
857 (*f)->length += len;
858 }
859
860 } else if ((*f)->status == F_GRABBING) { /* end of frame */
861
862 DBG(6, "Frame #%d successfully grabbed", (*f)->number)
863
864 if (cam->vpp_flag & VPP_DECOMPRESSION) {
865 err = w9968cf_vpp->check_headers((*f)->buffer,
866 (*f)->length);
867 if (err) {
868 DBG(4, "Skip corrupted frame: %s",
869 symbolic(decoder_errlist, err))
870 (*f)->status = F_UNUSED;
871 continue; /* grab this frame again */
872 }
873 }
874
875 (*f)->status = F_READY;
876 (*f)->queued = 0;
877
878 /* Take a pointer to the new frame from the FIFO list.
879 If the list is empty,we'll use the temporary frame*/
880 if (*cam->requested_frame)
881 w9968cf_pop_frame(cam, &cam->frame_current);
882 else {
883 cam->frame_current = &cam->frame_tmp;
884 (*f)->status = F_UNUSED;
885 }
886
887 } else if ((*f)->status == F_ERROR)
888 (*f)->status = F_UNUSED; /* grab it again */
889
890 PDBGG("Frame length %lu | pack.#%u | pack.len. %u | state %d",
891 (unsigned long)(*f)->length, i, len, (*f)->status)
892
893 } /* end for */
894
895 /* Resubmit this URB */
896 urb->dev = cam->usbdev;
897 urb->status = 0;
898 spin_lock(&cam->urb_lock);
899 if (cam->streaming)
900 if ((err = usb_submit_urb(urb, GFP_ATOMIC))) {
901 cam->misconfigured = 1;
902 DBG(1, "Couldn't resubmit the URB: error %d, %s",
903 err, symbolic(urb_errlist, err))
904 }
905 spin_unlock(&cam->urb_lock);
906
907 /* Wake up the user process */
908 wake_up_interruptible(&cam->wait_queue);
909}
910
911
912/*---------------------------------------------------------------------------
913 Setup the URB structures for the isochronous transfer.
914 Submit the URBs so that the data transfer begins.
915 Return 0 on success, a negative number otherwise.
916 ---------------------------------------------------------------------------*/
917static int w9968cf_start_transfer(struct w9968cf_device* cam)
918{
919 struct usb_device *udev = cam->usbdev;
920 struct urb* urb;
921 const u16 p_size = wMaxPacketSize[cam->altsetting-1];
922 u16 w, h, d;
923 int vidcapt;
924 u32 t_size;
925 int err = 0;
926 s8 i, j;
927
928 for (i = 0; i < W9968CF_URBS; i++) {
929 urb = usb_alloc_urb(W9968CF_ISO_PACKETS, GFP_KERNEL);
930 cam->urb[i] = urb;
931 if (!urb) {
932 for (j = 0; j < i; j++)
933 usb_free_urb(cam->urb[j]);
934 DBG(1, "Couldn't allocate the URB structures")
935 return -ENOMEM;
936 }
937
938 urb->dev = udev;
939 urb->context = (void*)cam;
940 urb->pipe = usb_rcvisocpipe(udev, 1);
941 urb->transfer_flags = URB_ISO_ASAP;
942 urb->number_of_packets = W9968CF_ISO_PACKETS;
943 urb->complete = w9968cf_urb_complete;
944 urb->transfer_buffer = cam->transfer_buffer[i];
945 urb->transfer_buffer_length = p_size*W9968CF_ISO_PACKETS;
946 urb->interval = 1;
947 for (j = 0; j < W9968CF_ISO_PACKETS; j++) {
948 urb->iso_frame_desc[j].offset = p_size*j;
949 urb->iso_frame_desc[j].length = p_size;
950 }
951 }
952
953 /* Transfer size per frame, in WORD ! */
954 d = cam->hw_depth;
955 w = cam->hw_width;
956 h = cam->hw_height;
957
958 t_size = (w*h*d)/16;
959
960 err = w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */
961 err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */
962
963 /* Transfer size */
964 err += w9968cf_write_reg(cam, t_size & 0xffff, 0x3d); /* low bits */
965 err += w9968cf_write_reg(cam, t_size >> 16, 0x3e); /* high bits */
966
967 if (cam->vpp_flag & VPP_DECOMPRESSION)
968 err += w9968cf_upload_quantizationtables(cam);
969
970 vidcapt = w9968cf_read_reg(cam, 0x16); /* read picture settings */
971 err += w9968cf_write_reg(cam, vidcapt|0x8000, 0x16); /* capt. enable */
972
973 err += usb_set_interface(udev, 0, cam->altsetting);
974 err += w9968cf_write_reg(cam, 0x8a05, 0x3c); /* USB FIFO enable */
975
976 if (err || (vidcapt < 0)) {
977 for (i = 0; i < W9968CF_URBS; i++)
978 usb_free_urb(cam->urb[i]);
979 DBG(1, "Couldn't tell the camera to start the data transfer")
980 return err;
981 }
982
983 w9968cf_init_framelist(cam);
984
985 /* Begin to grab into the temporary buffer */
986 cam->frame_tmp.status = F_UNUSED;
987 cam->frame_tmp.queued = 0;
988 cam->frame_current = &cam->frame_tmp;
989
990 if (!(cam->vpp_flag & VPP_DECOMPRESSION))
991 DBG(5, "Isochronous transfer size: %lu bytes/frame",
992 (unsigned long)t_size*2)
993
994 DBG(5, "Starting the isochronous transfer...")
995
996 cam->streaming = 1;
997
998 /* Submit the URBs */
999 for (i = 0; i < W9968CF_URBS; i++) {
1000 err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
1001 if (err) {
1002 cam->streaming = 0;
1003 for (j = i-1; j >= 0; j--) {
1004 usb_kill_urb(cam->urb[j]);
1005 usb_free_urb(cam->urb[j]);
1006 }
1007 DBG(1, "Couldn't send a transfer request to the "
1008 "USB core (error #%d, %s)", err,
1009 symbolic(urb_errlist, err))
1010 return err;
1011 }
1012 }
1013
1014 return 0;
1015}
1016
1017
1018/*--------------------------------------------------------------------------
1019 Stop the isochronous transfer and set alternate setting to 0 (0Mb/s).
1020 Return 0 on success, a negative number otherwise.
1021 --------------------------------------------------------------------------*/
1022static int w9968cf_stop_transfer(struct w9968cf_device* cam)
1023{
1024 struct usb_device *udev = cam->usbdev;
1025 unsigned long lock_flags;
1026 int err = 0;
1027 s8 i;
1028
1029 if (!cam->streaming)
1030 return 0;
1031
1032 /* This avoids race conditions with usb_submit_urb()
1033 in the URB completition handler */
1034 spin_lock_irqsave(&cam->urb_lock, lock_flags);
1035 cam->streaming = 0;
1036 spin_unlock_irqrestore(&cam->urb_lock, lock_flags);
1037
1038 for (i = W9968CF_URBS-1; i >= 0; i--)
1039 if (cam->urb[i]) {
1040 usb_kill_urb(cam->urb[i]);
1041 usb_free_urb(cam->urb[i]);
1042 cam->urb[i] = NULL;
1043 }
1044
1045 if (cam->disconnected)
1046 goto exit;
1047
1048 err = w9968cf_write_reg(cam, 0x0a05, 0x3c); /* stop USB transfer */
1049 err += usb_set_interface(udev, 0, 0); /* 0 Mb/s */
1050 err += w9968cf_write_reg(cam, 0x0000, 0x39); /* disable JPEG encoder */
1051 err += w9968cf_write_reg(cam, 0x0000, 0x16); /* stop video capture */
1052
1053 if (err) {
1054 DBG(2, "Failed to tell the camera to stop the isochronous "
1055 "transfer. However this is not a critical error.")
1056 return -EIO;
1057 }
1058
1059exit:
1060 DBG(5, "Isochronous transfer stopped")
1061 return 0;
1062}
1063
1064
1065/*--------------------------------------------------------------------------
1066 Write a W9968CF register.
1067 Return 0 on success, -1 otherwise.
1068 --------------------------------------------------------------------------*/
1069static int w9968cf_write_reg(struct w9968cf_device* cam, u16 value, u16 index)
1070{
1071 struct usb_device* udev = cam->usbdev;
1072 int res;
1073
1074 res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
1075 USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
1076 value, index, NULL, 0, W9968CF_USB_CTRL_TIMEOUT);
1077
1078 if (res < 0)
1079 DBG(4, "Failed to write a register "
1080 "(value 0x%04X, index 0x%02X, error #%d, %s)",
1081 value, index, res, symbolic(urb_errlist, res))
1082
1083 return (res >= 0) ? 0 : -1;
1084}
1085
1086
1087/*--------------------------------------------------------------------------
1088 Read a W9968CF register.
1089 Return the register value on success, -1 otherwise.
1090 --------------------------------------------------------------------------*/
1091static int w9968cf_read_reg(struct w9968cf_device* cam, u16 index)
1092{
1093 struct usb_device* udev = cam->usbdev;
1094 u16* buff = cam->control_buffer;
1095 int res;
1096
1097 res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 1,
1098 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1099 0, index, buff, 2, W9968CF_USB_CTRL_TIMEOUT);
1100
1101 if (res < 0)
1102 DBG(4, "Failed to read a register "
1103 "(index 0x%02X, error #%d, %s)",
1104 index, res, symbolic(urb_errlist, res))
1105
1106 return (res >= 0) ? (int)(*buff) : -1;
1107}
1108
1109
1110/*--------------------------------------------------------------------------
1111 Write 64-bit data to the fast serial bus registers.
1112 Return 0 on success, -1 otherwise.
1113 --------------------------------------------------------------------------*/
1114static int w9968cf_write_fsb(struct w9968cf_device* cam, u16* data)
1115{
1116 struct usb_device* udev = cam->usbdev;
1117 u16 value;
1118 int res;
1119
1120 value = *data++;
1121
1122 res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
1123 USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
1124 value, 0x06, data, 6, W9968CF_USB_CTRL_TIMEOUT);
1125
1126 if (res < 0)
1127 DBG(4, "Failed to write the FSB registers "
1128 "(error #%d, %s)", res, symbolic(urb_errlist, res))
1129
1130 return (res >= 0) ? 0 : -1;
1131}
1132
1133
1134/*--------------------------------------------------------------------------
1135 Write data to the serial bus control register.
1136 Return 0 on success, a negative number otherwise.
1137 --------------------------------------------------------------------------*/
1138static int w9968cf_write_sb(struct w9968cf_device* cam, u16 value)
1139{
1140 int err = 0;
1141
1142 err = w9968cf_write_reg(cam, value, 0x01);
1143 udelay(W9968CF_I2C_BUS_DELAY);
1144
1145 return err;
1146}
1147
1148
1149/*--------------------------------------------------------------------------
1150 Read data from the serial bus control register.
1151 Return 0 on success, a negative number otherwise.
1152 --------------------------------------------------------------------------*/
1153static int w9968cf_read_sb(struct w9968cf_device* cam)
1154{
1155 int v = 0;
1156
1157 v = w9968cf_read_reg(cam, 0x01);
1158 udelay(W9968CF_I2C_BUS_DELAY);
1159
1160 return v;
1161}
1162
1163
1164/*--------------------------------------------------------------------------
1165 Upload quantization tables for the JPEG compression.
1166 This function is called by w9968cf_start_transfer().
1167 Return 0 on success, a negative number otherwise.
1168 --------------------------------------------------------------------------*/
1169static int w9968cf_upload_quantizationtables(struct w9968cf_device* cam)
1170{
1171 u16 a, b;
1172 int err = 0, i, j;
1173
1174 err += w9968cf_write_reg(cam, 0x0010, 0x39); /* JPEG clock enable */
1175
1176 for (i = 0, j = 0; i < 32; i++, j += 2) {
1177 a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8);
1178 b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8);
1179 err += w9968cf_write_reg(cam, a, 0x40+i);
1180 err += w9968cf_write_reg(cam, b, 0x60+i);
1181 }
1182 err += w9968cf_write_reg(cam, 0x0012, 0x39); /* JPEG encoder enable */
1183
1184 return err;
1185}
1186
1187
1188
1189/****************************************************************************
1190 * Low-level I2C I/O functions. *
1191 * The adapter supports the following I2C transfer functions: *
1192 * i2c_adap_fastwrite_byte_data() (at 400 kHz bit frequency only) *
1193 * i2c_adap_read_byte_data() *
1194 * i2c_adap_read_byte() *
1195 ****************************************************************************/
1196
1197static int w9968cf_smbus_start(struct w9968cf_device* cam)
1198{
1199 int err = 0;
1200
1201 err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
1202 err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
1203
1204 return err;
1205}
1206
1207
1208static int w9968cf_smbus_stop(struct w9968cf_device* cam)
1209{
1210 int err = 0;
1211
1212 err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
1213 err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */
1214
1215 return err;
1216}
1217
1218
1219static int w9968cf_smbus_write_byte(struct w9968cf_device* cam, u8 v)
1220{
1221 u8 bit;
1222 int err = 0, sda;
1223
1224 for (bit = 0 ; bit < 8 ; bit++) {
1225 sda = (v & 0x80) ? 2 : 0;
1226 v <<= 1;
1227 /* SDE=1, SDA=sda, SCL=0 */
1228 err += w9968cf_write_sb(cam, 0x10 | sda);
1229 /* SDE=1, SDA=sda, SCL=1 */
1230 err += w9968cf_write_sb(cam, 0x11 | sda);
1231 /* SDE=1, SDA=sda, SCL=0 */
1232 err += w9968cf_write_sb(cam, 0x10 | sda);
1233 }
1234
1235 return err;
1236}
1237
1238
1239static int w9968cf_smbus_read_byte(struct w9968cf_device* cam, u8* v)
1240{
1241 u8 bit;
1242 int err = 0;
1243
1244 *v = 0;
1245 for (bit = 0 ; bit < 8 ; bit++) {
1246 *v <<= 1;
1247 err += w9968cf_write_sb(cam, 0x0013);
1248 *v |= (w9968cf_read_sb(cam) & 0x0008) ? 1 : 0;
1249 err += w9968cf_write_sb(cam, 0x0012);
1250 }
1251
1252 return err;
1253}
1254
1255
1256static int w9968cf_smbus_write_ack(struct w9968cf_device* cam)
1257{
1258 int err = 0;
1259
1260 err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
1261 err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */
1262 err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */
1263
1264 return err;
1265}
1266
1267
1268static int w9968cf_smbus_read_ack(struct w9968cf_device* cam)
1269{
1270 int err = 0, sda;
1271
1272 err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */
1273 sda = (w9968cf_read_sb(cam) & 0x08) ? 1 : 0; /* sda = SDA */
1274 err += w9968cf_write_sb(cam, 0x0012); /* SDE=1, SDA=1, SCL=0 */
1275 if (sda < 0)
1276 err += sda;
1277 if (sda == 1) {
1278 DBG(6, "Couldn't receive the ACK")
1279 err += -1;
1280 }
1281
1282 return err;
1283}
1284
1285
1286/* This seems to refresh the communication through the serial bus */
1287static int w9968cf_smbus_refresh_bus(struct w9968cf_device* cam)
1288{
1289 int err = 0, j;
1290
1291 for (j = 1; j <= 10; j++) {
1292 err = w9968cf_write_reg(cam, 0x0020, 0x01);
1293 err += w9968cf_write_reg(cam, 0x0000, 0x01);
1294 if (err)
1295 break;
1296 }
1297
1298 return err;
1299}
1300
1301
1302/* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */
1303static int
1304w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device* cam,
1305 u16 address, u8 subaddress,u8 value)
1306{
1307 u16* data = cam->data_buffer;
1308 int err = 0;
1309
1310 err += w9968cf_smbus_refresh_bus(cam);
1311
1312 /* Enable SBUS outputs */
1313 err += w9968cf_write_sb(cam, 0x0020);
1314
1315 data[0] = 0x082f | ((address & 0x80) ? 0x1500 : 0x0);
1316 data[0] |= (address & 0x40) ? 0x4000 : 0x0;
1317 data[1] = 0x2082 | ((address & 0x40) ? 0x0005 : 0x0);
1318 data[1] |= (address & 0x20) ? 0x0150 : 0x0;
1319 data[1] |= (address & 0x10) ? 0x5400 : 0x0;
1320 data[2] = 0x8208 | ((address & 0x08) ? 0x0015 : 0x0);
1321 data[2] |= (address & 0x04) ? 0x0540 : 0x0;
1322 data[2] |= (address & 0x02) ? 0x5000 : 0x0;
1323 data[3] = 0x1d20 | ((address & 0x02) ? 0x0001 : 0x0);
1324 data[3] |= (address & 0x01) ? 0x0054 : 0x0;
1325
1326 err += w9968cf_write_fsb(cam, data);
1327
1328 data[0] = 0x8208 | ((subaddress & 0x80) ? 0x0015 : 0x0);
1329 data[0] |= (subaddress & 0x40) ? 0x0540 : 0x0;
1330 data[0] |= (subaddress & 0x20) ? 0x5000 : 0x0;
1331 data[1] = 0x0820 | ((subaddress & 0x20) ? 0x0001 : 0x0);
1332 data[1] |= (subaddress & 0x10) ? 0x0054 : 0x0;
1333 data[1] |= (subaddress & 0x08) ? 0x1500 : 0x0;
1334 data[1] |= (subaddress & 0x04) ? 0x4000 : 0x0;
1335 data[2] = 0x2082 | ((subaddress & 0x04) ? 0x0005 : 0x0);
1336 data[2] |= (subaddress & 0x02) ? 0x0150 : 0x0;
1337 data[2] |= (subaddress & 0x01) ? 0x5400 : 0x0;
1338 data[3] = 0x001d;
1339
1340 err += w9968cf_write_fsb(cam, data);
1341
1342 data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0);
1343 data[0] |= (value & 0x40) ? 0x0540 : 0x0;
1344 data[0] |= (value & 0x20) ? 0x5000 : 0x0;
1345 data[1] = 0x0820 | ((value & 0x20) ? 0x0001 : 0x0);
1346 data[1] |= (value & 0x10) ? 0x0054 : 0x0;
1347 data[1] |= (value & 0x08) ? 0x1500 : 0x0;
1348 data[1] |= (value & 0x04) ? 0x4000 : 0x0;
1349 data[2] = 0x2082 | ((value & 0x04) ? 0x0005 : 0x0);
1350 data[2] |= (value & 0x02) ? 0x0150 : 0x0;
1351 data[2] |= (value & 0x01) ? 0x5400 : 0x0;
1352 data[3] = 0xfe1d;
1353
1354 err += w9968cf_write_fsb(cam, data);
1355
1356 /* Disable SBUS outputs */
1357 err += w9968cf_write_sb(cam, 0x0000);
1358
1359 if (!err)
1360 DBG(5, "I2C write byte data done, addr.0x%04X, subaddr.0x%02X "
1361 "value 0x%02X", address, subaddress, value)
1362 else
1363 DBG(5, "I2C write byte data failed, addr.0x%04X, "
1364 "subaddr.0x%02X, value 0x%02X",
1365 address, subaddress, value)
1366
1367 return err;
1368}
1369
1370
1371/* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */
1372static int
1373w9968cf_i2c_adap_read_byte_data(struct w9968cf_device* cam,
1374 u16 address, u8 subaddress,
1375 u8* value)
1376{
1377 int err = 0;
1378
1379 /* Serial data enable */
1380 err += w9968cf_write_sb(cam, 0x0013); /* don't change ! */
1381
1382 err += w9968cf_smbus_start(cam);
1383 err += w9968cf_smbus_write_byte(cam, address);
1384 err += w9968cf_smbus_read_ack(cam);
1385 err += w9968cf_smbus_write_byte(cam, subaddress);
1386 err += w9968cf_smbus_read_ack(cam);
1387 err += w9968cf_smbus_stop(cam);
1388 err += w9968cf_smbus_start(cam);
1389 err += w9968cf_smbus_write_byte(cam, address + 1);
1390 err += w9968cf_smbus_read_ack(cam);
1391 err += w9968cf_smbus_read_byte(cam, value);
1392 err += w9968cf_smbus_write_ack(cam);
1393 err += w9968cf_smbus_stop(cam);
1394
1395 /* Serial data disable */
1396 err += w9968cf_write_sb(cam, 0x0000);
1397
1398 if (!err)
1399 DBG(5, "I2C read byte data done, addr.0x%04X, "
1400 "subaddr.0x%02X, value 0x%02X",
1401 address, subaddress, *value)
1402 else
1403 DBG(5, "I2C read byte data failed, addr.0x%04X, "
1404 "subaddr.0x%02X, wrong value 0x%02X",
1405 address, subaddress, *value)
1406
1407 return err;
1408}
1409
1410
1411/* SMBus protocol: S Addr+1 Rd [A] [Value] NA P */
1412static int
1413w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam,
1414 u16 address, u8* value)
1415{
1416 int err = 0;
1417
1418 /* Serial data enable */
1419 err += w9968cf_write_sb(cam, 0x0013);
1420
1421 err += w9968cf_smbus_start(cam);
1422 err += w9968cf_smbus_write_byte(cam, address + 1);
1423 err += w9968cf_smbus_read_ack(cam);
1424 err += w9968cf_smbus_read_byte(cam, value);
1425 err += w9968cf_smbus_write_ack(cam);
1426 err += w9968cf_smbus_stop(cam);
1427
1428 /* Serial data disable */
1429 err += w9968cf_write_sb(cam, 0x0000);
1430
1431 if (!err)
1432 DBG(5, "I2C read byte done, addr.0x%04X, "
1433 "value 0x%02X", address, *value)
1434 else
1435 DBG(5, "I2C read byte failed, addr.0x%04X, "
1436 "wrong value 0x%02X", address, *value)
1437
1438 return err;
1439}
1440
1441
1442/* SMBus protocol: S Addr Wr [A] Value [A] P */
1443static int
1444w9968cf_i2c_adap_write_byte(struct w9968cf_device* cam,
1445 u16 address, u8 value)
1446{
1447 DBG(4, "i2c_write_byte() is an unsupported transfer mode")
1448 return -EINVAL;
1449}
1450
1451
1452
1453/****************************************************************************
1454 * I2C interface to kernel *
1455 ****************************************************************************/
1456
1457static int
1458w9968cf_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
1459 unsigned short flags, char read_write, u8 command,
1460 int size, union i2c_smbus_data *data)
1461{
1462 struct w9968cf_device* cam = i2c_get_adapdata(adapter);
1463 u8 i;
1464 int err = 0;
1465
1466 switch (addr) {
1467 case OV6xx0_SID:
1468 case OV7xx0_SID:
1469 break;
1470 default:
1471 DBG(4, "Rejected slave ID 0x%04X", addr)
1472 return -EINVAL;
1473 }
1474
1475 if (size == I2C_SMBUS_BYTE) {
1476 /* Why addr <<= 1? See OVXXX0_SID defines in ovcamchip.h */
1477 addr <<= 1;
1478
1479 if (read_write == I2C_SMBUS_WRITE)
1480 err = w9968cf_i2c_adap_write_byte(cam, addr, command);
1481 else if (read_write == I2C_SMBUS_READ)
1482 err = w9968cf_i2c_adap_read_byte(cam,addr,&data->byte);
1483
1484 } else if (size == I2C_SMBUS_BYTE_DATA) {
1485 addr <<= 1;
1486
1487 if (read_write == I2C_SMBUS_WRITE)
1488 err = w9968cf_i2c_adap_fastwrite_byte_data(cam, addr,
1489 command, data->byte);
1490 else if (read_write == I2C_SMBUS_READ) {
1491 for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) {
1492 err = w9968cf_i2c_adap_read_byte_data(cam,addr,
1493 command, &data->byte);
1494 if (err) {
1495 if (w9968cf_smbus_refresh_bus(cam)) {
1496 err = -EIO;
1497 break;
1498 }
1499 } else
1500 break;
1501 }
1502
1503 } else
1504 return -EINVAL;
1505
1506 } else {
1507 DBG(4, "Unsupported I2C transfer mode (%d)", size)
1508 return -EINVAL;
1509 }
1510
1511 return err;
1512}
1513
1514
1515static u32 w9968cf_i2c_func(struct i2c_adapter* adap)
1516{
1517 return I2C_FUNC_SMBUS_READ_BYTE |
1518 I2C_FUNC_SMBUS_READ_BYTE_DATA |
1519 I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
1520}
1521
1522
1523static int w9968cf_i2c_attach_inform(struct i2c_client* client)
1524{
1525 struct w9968cf_device* cam = i2c_get_adapdata(client->adapter);
1da177e4
LT		 1526 int id = client->driver->id, err = 0;
1527
1528 if (id == I2C_DRIVERID_OVCAMCHIP) {
1529 cam->sensor_client = client;
1530 err = w9968cf_sensor_init(cam);
1531 if (err) {
1532 cam->sensor_client = NULL;
1533 return err;
1534 }
1535 } else {
1536 DBG(4, "Rejected client [%s] with driver [%s]",
fae91e72 1537 client->name, client->driver->name)
1da177e4
LT		 1538 return -EINVAL;
1539 }
1540
1541 DBG(5, "I2C attach client [%s] with driver [%s]",
fae91e72 1542 client->name, client->driver->name)
1da177e4
LT		 1543
1544 return 0;
1545}
1546
1547
1548static int w9968cf_i2c_detach_inform(struct i2c_client* client)
1549{
1550 struct w9968cf_device* cam = i2c_get_adapdata(client->adapter);
1da177e4
LT		 1551
1552 if (cam->sensor_client == client)
1553 cam->sensor_client = NULL;
1554
fae91e72 1555 DBG(5, "I2C detach client [%s]", client->name)
1da177e4
LT		 1556
1557 return 0;
1558}
1559
1560
1561static int
1562w9968cf_i2c_control(struct i2c_adapter* adapter, unsigned int cmd,
1563 unsigned long arg)
1564{
1565 return 0;
1566}
1567
1568
1569static int w9968cf_i2c_init(struct w9968cf_device* cam)
1570{
1571 int err = 0;
1572
1573 static struct i2c_algorithm algo = {
1da177e4
LT		 1574 .smbus_xfer = w9968cf_i2c_smbus_xfer,
1575 .algo_control = w9968cf_i2c_control,
1576 .functionality = w9968cf_i2c_func,
1577 };
1578
1579 static struct i2c_adapter adap = {
c7a46533 1580 .id = I2C_HW_SMBUS_W9968CF,
1da177e4
LT		 1581 .class = I2C_CLASS_CAM_DIGITAL,
1582 .owner = THIS_MODULE,
1583 .client_register = w9968cf_i2c_attach_inform,
1584 .client_unregister = w9968cf_i2c_detach_inform,
1585 .algo = &algo,
1586 };
1587
1588 memcpy(&cam->i2c_adapter, &adap, sizeof(struct i2c_adapter));
1589 strcpy(cam->i2c_adapter.name, "w9968cf");
1590 i2c_set_adapdata(&cam->i2c_adapter, cam);
1591
1592 DBG(6, "Registering I2C adapter with kernel...")
1593
1594 err = i2c_add_adapter(&cam->i2c_adapter);
1595 if (err)
1596 DBG(1, "Failed to register the I2C adapter")
1597 else
1598 DBG(5, "I2C adapter registered")
1599
1600 return err;
1601}
1602
1603
1604
1605/****************************************************************************
1606 * Helper functions *
1607 ****************************************************************************/
1608
1609/*--------------------------------------------------------------------------
1610 Turn on the LED on some webcams. A beep should be heard too.
1611 Return 0 on success, a negative number otherwise.
1612 --------------------------------------------------------------------------*/
1613static int w9968cf_turn_on_led(struct w9968cf_device* cam)
1614{
1615 int err = 0;
1616
1617 err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power-down */
1618 err += w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */
1619 err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */
1620 err += w9968cf_write_reg(cam, 0x0010, 0x01); /* serial bus, SDS high */
1621 err += w9968cf_write_reg(cam, 0x0000, 0x01); /* serial bus, SDS low */
1622 err += w9968cf_write_reg(cam, 0x0010, 0x01); /* ..high 'beep-beep' */
1623
1624 if (err)
1625 DBG(2, "Couldn't turn on the LED")
1626
1627 DBG(5, "LED turned on")
1628
1629 return err;
1630}
1631
1632
1633/*--------------------------------------------------------------------------
1634 Write some registers for the device initialization.
1635 This function is called once on open().
1636 Return 0 on success, a negative number otherwise.
1637 --------------------------------------------------------------------------*/
1638static int w9968cf_init_chip(struct w9968cf_device* cam)
1639{
1640 unsigned long hw_bufsize = cam->maxwidth*cam->maxheight*2,
1641 y0 = 0x0000,
1642 u0 = y0 + hw_bufsize/2,
1643 v0 = u0 + hw_bufsize/4,
1644 y1 = v0 + hw_bufsize/4,
1645 u1 = y1 + hw_bufsize/2,
1646 v1 = u1 + hw_bufsize/4;
1647 int err = 0;
1648
1649 err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power off */
1650 err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* power on */
1651
1652 err += w9968cf_write_reg(cam, 0x405d, 0x03); /* DRAM timings */
1653 err += w9968cf_write_reg(cam, 0x0030, 0x04); /* SDRAM timings */
1654
1655 err += w9968cf_write_reg(cam, y0 & 0xffff, 0x20); /* Y buf.0, low */
1656 err += w9968cf_write_reg(cam, y0 >> 16, 0x21); /* Y buf.0, high */
1657 err += w9968cf_write_reg(cam, u0 & 0xffff, 0x24); /* U buf.0, low */
1658 err += w9968cf_write_reg(cam, u0 >> 16, 0x25); /* U buf.0, high */
1659 err += w9968cf_write_reg(cam, v0 & 0xffff, 0x28); /* V buf.0, low */
1660 err += w9968cf_write_reg(cam, v0 >> 16, 0x29); /* V buf.0, high */
1661
1662 err += w9968cf_write_reg(cam, y1 & 0xffff, 0x22); /* Y buf.1, low */
1663 err += w9968cf_write_reg(cam, y1 >> 16, 0x23); /* Y buf.1, high */
1664 err += w9968cf_write_reg(cam, u1 & 0xffff, 0x26); /* U buf.1, low */
1665 err += w9968cf_write_reg(cam, u1 >> 16, 0x27); /* U buf.1, high */
1666 err += w9968cf_write_reg(cam, v1 & 0xffff, 0x2a); /* V buf.1, low */
1667 err += w9968cf_write_reg(cam, v1 >> 16, 0x2b); /* V buf.1, high */
1668
1669 err += w9968cf_write_reg(cam, y1 & 0xffff, 0x32); /* JPEG buf 0 low */
1670 err += w9968cf_write_reg(cam, y1 >> 16, 0x33); /* JPEG buf 0 high */
1671
1672 err += w9968cf_write_reg(cam, y1 & 0xffff, 0x34); /* JPEG buf 1 low */
1673 err += w9968cf_write_reg(cam, y1 >> 16, 0x35); /* JPEG bug 1 high */
1674
1675 err += w9968cf_write_reg(cam, 0x0000, 0x36);/* JPEG restart interval */
1676 err += w9968cf_write_reg(cam, 0x0804, 0x37);/*JPEG VLE FIFO threshold*/
1677 err += w9968cf_write_reg(cam, 0x0000, 0x38);/* disable hw up-scaling */
1678 err += w9968cf_write_reg(cam, 0x0000, 0x3f); /* JPEG/MCTL test data */
1679
1680 err += w9968cf_set_picture(cam, cam->picture); /* this before */
1681 err += w9968cf_set_window(cam, cam->window);
1682
1683 if (err)
1684 DBG(1, "Chip initialization failed")
1685 else
1686 DBG(5, "Chip successfully initialized")
1687
1688 return err;
1689}
1690
1691
1692/*--------------------------------------------------------------------------
1693 Return non-zero if the palette is supported, 0 otherwise.
1694 --------------------------------------------------------------------------*/
1695static inline u16 w9968cf_valid_palette(u16 palette)
1696{
1697 u8 i = 0;
1698 while (w9968cf_formatlist[i].palette != 0) {
1699 if (palette == w9968cf_formatlist[i].palette)
1700 return palette;
1701 i++;
1702 }
1703 return 0;
1704}
1705
1706
1707/*--------------------------------------------------------------------------
1708 Return the depth corresponding to the given palette.
1709 Palette _must_ be supported !
1710 --------------------------------------------------------------------------*/
1711static inline u16 w9968cf_valid_depth(u16 palette)
1712{
1713 u8 i=0;
1714 while (w9968cf_formatlist[i].palette != palette)
1715 i++;
1716
1717 return w9968cf_formatlist[i].depth;
1718}
1719
1720
1721/*--------------------------------------------------------------------------
1722 Return non-zero if the format requires decompression, 0 otherwise.
1723 --------------------------------------------------------------------------*/
1724static inline u8 w9968cf_need_decompression(u16 palette)
1725{
1726 u8 i = 0;
1727 while (w9968cf_formatlist[i].palette != 0) {
1728 if (palette == w9968cf_formatlist[i].palette)
1729 return w9968cf_formatlist[i].compression;
1730 i++;
1731 }
1732 return 0;
1733}
1734
1735
1736/*--------------------------------------------------------------------------
1737 Change the picture settings of the camera.
1738 Return 0 on success, a negative number otherwise.
1739 --------------------------------------------------------------------------*/
1740static int
1741w9968cf_set_picture(struct w9968cf_device* cam, struct video_picture pict)
1742{
1743 u16 fmt, hw_depth, hw_palette, reg_v = 0x0000;
1744 int err = 0;
1745
1746 /* Make sure we are using a valid depth */
1747 pict.depth = w9968cf_valid_depth(pict.palette);
1748
1749 fmt = pict.palette;
1750
1751 hw_depth = pict.depth; /* depth used by the winbond chip */
1752 hw_palette = pict.palette; /* palette used by the winbond chip */
1753
1754 /* VS & HS polarities */
1755 reg_v = (cam->vs_polarity << 12) | (cam->hs_polarity << 11);
1756
1757 switch (fmt)
1758 {
1759 case VIDEO_PALETTE_UYVY:
1760 reg_v |= 0x0000;
1761 cam->vpp_flag = VPP_NONE;
1762 break;
1763 case VIDEO_PALETTE_YUV422P:
1764 reg_v |= 0x0002;
1765 cam->vpp_flag = VPP_DECOMPRESSION;
1766 break;
1767 case VIDEO_PALETTE_YUV420:
1768 case VIDEO_PALETTE_YUV420P:
1769 reg_v |= 0x0003;
1770 cam->vpp_flag = VPP_DECOMPRESSION;
1771 break;
1772 case VIDEO_PALETTE_YUYV:
1773 case VIDEO_PALETTE_YUV422:
1774 reg_v |= 0x0000;
1775 cam->vpp_flag = VPP_SWAP_YUV_BYTES;
1776 hw_palette = VIDEO_PALETTE_UYVY;
1777 break;
1778 /* Original video is used instead of RGBX palettes.
1779 Software conversion later. */
1780 case VIDEO_PALETTE_GREY:
1781 case VIDEO_PALETTE_RGB555:
1782 case VIDEO_PALETTE_RGB565:
1783 case VIDEO_PALETTE_RGB24:
1784 case VIDEO_PALETTE_RGB32:
1785 reg_v |= 0x0000; /* UYVY 16 bit is used */
1786 hw_depth = 16;
1787 hw_palette = VIDEO_PALETTE_UYVY;
1788 cam->vpp_flag = VPP_UYVY_TO_RGBX;
1789 break;
1790 }
1791
1792 /* NOTE: due to memory issues, it is better to disable the hardware
1793 double buffering during compression */
1794 if (cam->double_buffer && !(cam->vpp_flag & VPP_DECOMPRESSION))
1795 reg_v |= 0x0080;
1796
1797 if (cam->clamping)
1798 reg_v |= 0x0020;
1799
1800 if (cam->filter_type == 1)
1801 reg_v |= 0x0008;
1802 else if (cam->filter_type == 2)
1803 reg_v |= 0x000c;
1804
1805 if ((err = w9968cf_write_reg(cam, reg_v, 0x16)))
1806 goto error;
1807
1808 if ((err = w9968cf_sensor_update_picture(cam, pict)))
1809 goto error;
1810
1811 /* If all went well, update the device data structure */
1812 memcpy(&cam->picture, &pict, sizeof(pict));
1813 cam->hw_depth = hw_depth;
1814 cam->hw_palette = hw_palette;
1815
1816 /* Settings changed, so we clear the frame buffers */
1817 memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size);
1818
1819 DBG(4, "Palette is %s, depth is %u bpp",
1820 symbolic(v4l1_plist, pict.palette), pict.depth)
1821
1822 return 0;
1823
1824error:
1825 DBG(1, "Failed to change picture settings")
1826 return err;
1827}
1828
1829
1830/*--------------------------------------------------------------------------
1831 Change the capture area size of the camera.
1832 This function _must_ be called _after_ w9968cf_set_picture().
1833 Return 0 on success, a negative number otherwise.
1834 --------------------------------------------------------------------------*/
1835static int
1836w9968cf_set_window(struct w9968cf_device* cam, struct video_window win)
1837{
1838 u16 x, y, w, h, scx, scy, cw, ch, ax, ay;
1839 unsigned long fw, fh;
1840 struct ovcamchip_window s_win;
1841 int err = 0;
1842
1843 /* Work around to avoid FP arithmetics */
1844 #define __SC(x) ((x) << 10)
1845 #define __UNSC(x) ((x) >> 10)
1846
1847 /* Make sure we are using a supported resolution */
1848 if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
1849 (u16*)&win.height)))
1850 goto error;
1851
1852 /* Scaling factors */
1853 fw = __SC(win.width) / cam->maxwidth;
1854 fh = __SC(win.height) / cam->maxheight;
1855
1856 /* Set up the width and height values used by the chip */
1857 if ((win.width > cam->maxwidth) || (win.height > cam->maxheight)) {
1858 cam->vpp_flag |= VPP_UPSCALE;
1859 /* Calculate largest w,h mantaining the same w/h ratio */
1860 w = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh;
1861 h = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight;
1862 if (w < cam->minwidth) /* just in case */
1863 w = cam->minwidth;
1864 if (h < cam->minheight) /* just in case */
1865 h = cam->minheight;
1866 } else {
1867 cam->vpp_flag &= ~VPP_UPSCALE;
1868 w = win.width;
1869 h = win.height;
1870 }
1871
1872 /* x,y offsets of the cropped area */
1873 scx = cam->start_cropx;
1874 scy = cam->start_cropy;
1875
1876 /* Calculate cropped area manteining the right w/h ratio */
1877 if (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) {
1878 cw = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh;
1879 ch = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight;
1880 } else {
1881 cw = w;
1882 ch = h;
1883 }
1884
1885 /* Setup the window of the sensor */
1886 s_win.format = VIDEO_PALETTE_UYVY;
1887 s_win.width = cam->maxwidth;
1888 s_win.height = cam->maxheight;
1889 s_win.quarter = 0; /* full progressive video */
1890
1891 /* Center it */
1892 s_win.x = (s_win.width - cw) / 2;
1893 s_win.y = (s_win.height - ch) / 2;
1894
1895 /* Clock divisor */
1896 if (cam->clockdiv >= 0)
1897 s_win.clockdiv = cam->clockdiv; /* manual override */
1898 else
1899 switch (cam->sensor) {
1900 case CC_OV6620:
1901 s_win.clockdiv = 0;
1902 break;
1903 case CC_OV6630:
1904 s_win.clockdiv = 0;
1905 break;
1906 case CC_OV76BE:
1907 case CC_OV7610:
1908 case CC_OV7620:
1909 s_win.clockdiv = 0;
1910 break;
1911 default:
1912 s_win.clockdiv = W9968CF_DEF_CLOCKDIVISOR;
1913 }
1914
1915 /* We have to scale win.x and win.y offsets */
1916 if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
1917 || (cam->vpp_flag & VPP_UPSCALE) ) {
1918 ax = __SC(win.x)/fw;
1919 ay = __SC(win.y)/fh;
1920 } else {
1921 ax = win.x;
1922 ay = win.y;
1923 }
1924
1925 if ((ax + cw) > cam->maxwidth)
1926 ax = cam->maxwidth - cw;
1927
1928 if ((ay + ch) > cam->maxheight)
1929 ay = cam->maxheight - ch;
1930
1931 /* Adjust win.x, win.y */
1932 if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE))
1933 || (cam->vpp_flag & VPP_UPSCALE) ) {
1934 win.x = __UNSC(ax*fw);
1935 win.y = __UNSC(ay*fh);
1936 } else {
1937 win.x = ax;
1938 win.y = ay;
1939 }
1940
1941 /* Offsets used by the chip */
1942 x = ax + s_win.x;
1943 y = ay + s_win.y;
1944
1945 /* Go ! */
1946 if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_MODE, &s_win)))
1947 goto error;
1948
1949 err += w9968cf_write_reg(cam, scx + x, 0x10);
1950 err += w9968cf_write_reg(cam, scy + y, 0x11);
1951 err += w9968cf_write_reg(cam, scx + x + cw, 0x12);
1952 err += w9968cf_write_reg(cam, scy + y + ch, 0x13);
1953 err += w9968cf_write_reg(cam, w, 0x14);
1954 err += w9968cf_write_reg(cam, h, 0x15);
1955
1956 /* JPEG width & height */
1957 err += w9968cf_write_reg(cam, w, 0x30);
1958 err += w9968cf_write_reg(cam, h, 0x31);
1959
1960 /* Y & UV frame buffer strides (in WORD) */
1961 if (cam->vpp_flag & VPP_DECOMPRESSION) {
1962 err += w9968cf_write_reg(cam, w/2, 0x2c);
1963 err += w9968cf_write_reg(cam, w/4, 0x2d);
1964 } else
1965 err += w9968cf_write_reg(cam, w, 0x2c);
1966
1967 if (err)
1968 goto error;
1969
1970 /* If all went well, update the device data structure */
1971 memcpy(&cam->window, &win, sizeof(win));
1972 cam->hw_width = w;
1973 cam->hw_height = h;
1974
1975 /* Settings changed, so we clear the frame buffers */
1976 memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size);
1977
1978 DBG(4, "The capture area is %dx%d, Offset (x,y)=(%u,%u)",
1979 win.width, win.height, win.x, win.y)
1980
1981 PDBGG("x=%u ,y=%u, w=%u, h=%u, ax=%u, ay=%u, s_win.x=%u, s_win.y=%u, "
1982 "cw=%u, ch=%u, win.x=%u, win.y=%u, win.width=%u, win.height=%u",
1983 x, y, w, h, ax, ay, s_win.x, s_win.y, cw, ch, win.x, win.y,
1984 win.width, win.height)
1985
1986 return 0;
1987
1988error:
1989 DBG(1, "Failed to change the capture area size")
1990 return err;
1991}
1992
1993
1994/*--------------------------------------------------------------------------
1995 Adjust the asked values for window width and height.
1996 Return 0 on success, -1 otherwise.
1997 --------------------------------------------------------------------------*/
1998static int
1999w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height)
2000{
2001 u16 maxw, maxh;
2002
2003 if ((*width < cam->minwidth) || (*height < cam->minheight))
2004 return -ERANGE;
2005
2006 maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
2007 w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
2008 : cam->maxwidth;
2009 maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) &&
2010 w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
2011 : cam->maxheight;
2012
2013 if (*width > maxw)
2014 *width = maxw;
2015 if (*height > maxh)
2016 *height = maxh;
2017
2018 if (cam->vpp_flag & VPP_DECOMPRESSION) {
2019 *width &= ~15L; /* multiple of 16 */
2020 *height &= ~15L;
2021 }
2022
2023 PDBGG("Window size adjusted w=%u, h=%u ", *width, *height)
2024
2025 return 0;
2026}
2027
2028
2029/*--------------------------------------------------------------------------
2030 Initialize the FIFO list of requested frames.
2031 --------------------------------------------------------------------------*/
2032static void w9968cf_init_framelist(struct w9968cf_device* cam)
2033{
2034 u8 i;
2035
2036 for (i = 0; i < cam->nbuffers; i++) {
2037 cam->requested_frame[i] = NULL;
2038 cam->frame[i].queued = 0;
2039 cam->frame[i].status = F_UNUSED;
2040 }
2041}
2042
2043
2044/*--------------------------------------------------------------------------
2045 Add a frame in the FIFO list of requested frames.
2046 This function is called in process context.
2047 --------------------------------------------------------------------------*/
2048static void w9968cf_push_frame(struct w9968cf_device* cam, u8 f_num)
2049{
2050 u8 f;
2051 unsigned long lock_flags;
2052
2053 spin_lock_irqsave(&cam->flist_lock, lock_flags);
2054
2055 for (f=0; cam->requested_frame[f] != NULL; f++);
2056 cam->requested_frame[f] = &cam->frame[f_num];
2057 cam->frame[f_num].queued = 1;
2058 cam->frame[f_num].status = F_UNUSED; /* clear the status */
2059
2060 spin_unlock_irqrestore(&cam->flist_lock, lock_flags);
2061
2062 DBG(6, "Frame #%u pushed into the FIFO list. Position %u", f_num, f)
2063}
2064
2065
2066/*--------------------------------------------------------------------------
2067 Read, store and remove the first pointer in the FIFO list of requested
2068 frames. This function is called in interrupt context.
2069 --------------------------------------------------------------------------*/
2070static void
2071w9968cf_pop_frame(struct w9968cf_device* cam, struct w9968cf_frame_t** framep)
2072{
2073 u8 i;
2074
2075 spin_lock(&cam->flist_lock);
2076
2077 *framep = cam->requested_frame[0];
2078
2079 /* Shift the list of pointers */
2080 for (i = 0; i < cam->nbuffers-1; i++)
2081 cam->requested_frame[i] = cam->requested_frame[i+1];
2082 cam->requested_frame[i] = NULL;
2083
2084 spin_unlock(&cam->flist_lock);
2085
2086 DBG(6,"Popped frame #%d from the list", (*framep)->number)
2087}
2088
2089
2090/*--------------------------------------------------------------------------
2091 High-level video post-processing routine on grabbed frames.
2092 Return 0 on success, a negative number otherwise.
2093 --------------------------------------------------------------------------*/
2094static int
2095w9968cf_postprocess_frame(struct w9968cf_device* cam,
2096 struct w9968cf_frame_t* fr)
2097{
2098 void *pIn = fr->buffer, *pOut = cam->frame_vpp.buffer, *tmp;
2099 u16 w = cam->window.width,
2100 h = cam->window.height,
2101 d = cam->picture.depth,
2102 fmt = cam->picture.palette,
2103 rgb = cam->force_rgb,
2104 hw_w = cam->hw_width,
2105 hw_h = cam->hw_height,
2106 hw_d = cam->hw_depth;
2107 int err = 0;
2108
2109 #define _PSWAP(pIn, pOut) {tmp = (pIn); (pIn) = (pOut); (pOut) = tmp;}
2110
2111 if (cam->vpp_flag & VPP_DECOMPRESSION) {
2112 memcpy(pOut, pIn, fr->length);
2113 _PSWAP(pIn, pOut)
2114 err = w9968cf_vpp->decode(pIn, fr->length, hw_w, hw_h, pOut);
2115 PDBGG("Compressed frame length: %lu",(unsigned long)fr->length)
2116 fr->length = (hw_w*hw_h*hw_d)/8;
2117 _PSWAP(pIn, pOut)
2118 if (err) {
2119 DBG(4, "An error occurred while decoding the frame: "
2120 "%s", symbolic(decoder_errlist, err))
2121 return err;
2122 } else
2123 DBG(6, "Frame decoded")
2124 }
2125
2126 if (cam->vpp_flag & VPP_SWAP_YUV_BYTES) {
2127 w9968cf_vpp->swap_yuvbytes(pIn, fr->length);
2128 DBG(6, "Original UYVY component ordering changed")
2129 }
2130
2131 if (cam->vpp_flag & VPP_UPSCALE) {
2132 w9968cf_vpp->scale_up(pIn, pOut, hw_w, hw_h, hw_d, w, h);
2133 fr->length = (w*h*hw_d)/8;
2134 _PSWAP(pIn, pOut)
2135 DBG(6, "Vertical up-scaling done: %u,%u,%ubpp->%u,%u",
2136 hw_w, hw_h, hw_d, w, h)
2137 }
2138
2139 if (cam->vpp_flag & VPP_UYVY_TO_RGBX) {
2140 w9968cf_vpp->uyvy_to_rgbx(pIn, fr->length, pOut, fmt, rgb);
2141 fr->length = (w*h*d)/8;
2142 _PSWAP(pIn, pOut)
2143 DBG(6, "UYVY-16bit to %s conversion done",
2144 symbolic(v4l1_plist, fmt))
2145 }
2146
2147 if (pOut == fr->buffer)
2148 memcpy(fr->buffer, cam->frame_vpp.buffer, fr->length);
2149
2150 return 0;
2151}
2152
2153
2154
2155/****************************************************************************
2156 * Image sensor control routines *
2157 ****************************************************************************/
2158
2159static int
2160w9968cf_sensor_set_control(struct w9968cf_device* cam, int cid, int val)
2161{
2162 struct ovcamchip_control ctl;
2163 int err;
2164
2165 ctl.id = cid;
2166 ctl.value = val;
2167
2168 err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_CTRL, &ctl);
2169
2170 return err;
2171}
2172
2173
2174static int
2175w9968cf_sensor_get_control(struct w9968cf_device* cam, int cid, int* val)
2176{
2177 struct ovcamchip_control ctl;
2178 int err;
2179
2180 ctl.id = cid;
2181
2182 err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_G_CTRL, &ctl);
2183 if (!err)
2184 *val = ctl.value;
2185
2186 return err;
2187}
2188
2189
2190static int
2191w9968cf_sensor_cmd(struct w9968cf_device* cam, unsigned int cmd, void* arg)
2192{
2193 struct i2c_client* c = cam->sensor_client;
2194 int rc = 0;
2195
2196 if (!c || !c->driver || !c->driver->command)
2197 return -EINVAL;
2198
2199 rc = c->driver->command(c, cmd, arg);
2200 /* The I2C driver returns -EPERM on non-supported controls */
2201 return (rc < 0 && rc != -EPERM) ? rc : 0;
2202}
2203
2204
2205/*--------------------------------------------------------------------------
2206 Update some settings of the image sensor.
2207 Returns: 0 on success, a negative number otherwise.
2208 --------------------------------------------------------------------------*/
2209static int w9968cf_sensor_update_settings(struct w9968cf_device* cam)
2210{
2211 int err = 0;
2212
2213 /* Auto brightness */
2214 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOBRIGHT,
2215 cam->auto_brt);
2216 if (err)
2217 return err;
2218
2219 /* Auto exposure */
2220 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOEXP,
2221 cam->auto_exp);
2222 if (err)
2223 return err;
2224
2225 /* Banding filter */
2226 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BANDFILT,
2227 cam->bandfilt);
2228 if (err)
2229 return err;
2230
2231 /* Light frequency */
2232 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_FREQ,
2233 cam->lightfreq);
2234 if (err)
2235 return err;
2236
2237 /* Back light */
2238 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BACKLIGHT,
2239 cam->backlight);
2240 if (err)
2241 return err;
2242
2243 /* Mirror */
2244 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_MIRROR,
2245 cam->mirror);
2246 if (err)
2247 return err;
2248
2249 return 0;
2250}
2251
2252
2253/*--------------------------------------------------------------------------
2254 Get some current picture settings from the image sensor and update the
2255 internal 'picture' structure of the camera.
2256 Returns: 0 on success, a negative number otherwise.
2257 --------------------------------------------------------------------------*/
2258static int w9968cf_sensor_get_picture(struct w9968cf_device* cam)
2259{
2260 int err, v;
2261
2262 err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_CONT, &v);
2263 if (err)
2264 return err;
2265 cam->picture.contrast = v;
2266
2267 err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_BRIGHT, &v);
2268 if (err)
2269 return err;
2270 cam->picture.brightness = v;
2271
2272 err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_SAT, &v);
2273 if (err)
2274 return err;
2275 cam->picture.colour = v;
2276
2277 err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_HUE, &v);
2278 if (err)
2279 return err;
2280 cam->picture.hue = v;
2281
2282 DBG(5, "Got picture settings from the image sensor")
2283
2284 PDBGG("Brightness, contrast, hue, colour, whiteness are "
2285 "%u,%u,%u,%u,%u", cam->picture.brightness,cam->picture.contrast,
2286 cam->picture.hue, cam->picture.colour, cam->picture.whiteness)
2287
2288 return 0;
2289}
2290
2291
2292/*--------------------------------------------------------------------------
2293 Update picture settings of the image sensor.
2294 Returns: 0 on success, a negative number otherwise.
2295 --------------------------------------------------------------------------*/
2296static int
2297w9968cf_sensor_update_picture(struct w9968cf_device* cam,
2298 struct video_picture pict)
2299{
2300 int err = 0;
2301
2302 if ((!cam->sensor_initialized)
2303 || pict.contrast != cam->picture.contrast) {
2304 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_CONT,
2305 pict.contrast);
2306 if (err)
2307 goto fail;
2308 DBG(4, "Contrast changed from %u to %u",
2309 cam->picture.contrast, pict.contrast)
2310 cam->picture.contrast = pict.contrast;
2311 }
2312
2313 if (((!cam->sensor_initialized) ||
2314 pict.brightness != cam->picture.brightness) && (!cam->auto_brt)) {
2315 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BRIGHT,
2316 pict.brightness);
2317 if (err)
2318 goto fail;
2319 DBG(4, "Brightness changed from %u to %u",
2320 cam->picture.brightness, pict.brightness)
2321 cam->picture.brightness = pict.brightness;
2322 }
2323
2324 if ((!cam->sensor_initialized) || pict.colour != cam->picture.colour) {
2325 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_SAT,
2326 pict.colour);
2327 if (err)
2328 goto fail;
2329 DBG(4, "Colour changed from %u to %u",
2330 cam->picture.colour, pict.colour)
2331 cam->picture.colour = pict.colour;
2332 }
2333
2334 if ((!cam->sensor_initialized) || pict.hue != cam->picture.hue) {
2335 err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_HUE,
2336 pict.hue);
2337 if (err)
2338 goto fail;
2339 DBG(4, "Hue changed from %u to %u",
2340 cam->picture.hue, pict.hue)
2341 cam->picture.hue = pict.hue;
2342 }
2343
2344 return 0;
2345
2346fail:
2347 DBG(4, "Failed to change sensor picture setting")
2348 return err;
2349}
2350
2351
2352
2353/****************************************************************************
2354 * Camera configuration *
2355 ****************************************************************************/
2356
2357/*--------------------------------------------------------------------------
2358 This function is called when a supported image sensor is detected.
2359 Return 0 if the initialization succeeds, a negative number otherwise.
2360 --------------------------------------------------------------------------*/
2361static int w9968cf_sensor_init(struct w9968cf_device* cam)
2362{
2363 int err = 0;
2364
2365 if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_INITIALIZE,
2366 &cam->monochrome)))
2367 goto error;
2368
2369 if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_Q_SUBTYPE,
2370 &cam->sensor)))
2371 goto error;
2372
2373 /* NOTE: Make sure width and height are a multiple of 16 */
2374 switch (cam->sensor_client->addr) {
2375 case OV6xx0_SID:
2376 cam->maxwidth = 352;
2377 cam->maxheight = 288;
2378 cam->minwidth = 64;
2379 cam->minheight = 48;
2380 break;
2381 case OV7xx0_SID:
2382 cam->maxwidth = 640;
2383 cam->maxheight = 480;
2384 cam->minwidth = 64;
2385 cam->minheight = 48;
2386 break;
2387 default:
2388 DBG(1, "Not supported image sensor detected for %s",
2389 symbolic(camlist, cam->id))
2390 return -EINVAL;
2391 }
2392
2393 /* These values depend on the ones in the ovxxx0.c sources */
2394 switch (cam->sensor) {
2395 case CC_OV7620:
2396 cam->start_cropx = 287;
2397 cam->start_cropy = 35;
2398 /* Seems to work around a bug in the image sensor */
2399 cam->vs_polarity = 1;
2400 cam->hs_polarity = 1;
2401 break;
2402 default:
2403 cam->start_cropx = 320;
2404 cam->start_cropy = 35;
2405 cam->vs_polarity = 1;
2406 cam->hs_polarity = 0;
2407 }
2408
2409 if ((err = w9968cf_sensor_update_settings(cam)))
2410 goto error;
2411
2412 if ((err = w9968cf_sensor_update_picture(cam, cam->picture)))
2413 goto error;
2414
2415 cam->sensor_initialized = 1;
2416
2417 DBG(2, "%s image sensor initialized", symbolic(senlist, cam->sensor))
2418 return 0;
2419
2420error:
2421 cam->sensor_initialized = 0;
2422 cam->sensor = CC_UNKNOWN;
2423 DBG(1, "Image sensor initialization failed for %s (/dev/video%d). "
2424 "Try to detach and attach this device again",
2425 symbolic(camlist, cam->id), cam->v4ldev->minor)
2426 return err;
2427}
2428
2429
2430/*--------------------------------------------------------------------------
2431 Fill some basic fields in the main device data structure.
2432 This function is called once on w9968cf_usb_probe() for each recognized
2433 camera.
2434 --------------------------------------------------------------------------*/
2435static void
2436w9968cf_configure_camera(struct w9968cf_device* cam,
2437 struct usb_device* udev,
2438 enum w9968cf_model_id mod_id,
2439 const unsigned short dev_nr)
2440{
2441 init_MUTEX(&cam->fileop_sem);
2442 init_waitqueue_head(&cam->open);
2443 spin_lock_init(&cam->urb_lock);
2444 spin_lock_init(&cam->flist_lock);
2445
2446 cam->users = 0;
2447 cam->disconnected = 0;
2448 cam->id = mod_id;
2449 cam->sensor = CC_UNKNOWN;
2450 cam->sensor_initialized = 0;
2451
2452 /* Calculate the alternate setting number (from 1 to 16)
2453 according to the 'packet_size' module parameter */
2454 if (packet_size[dev_nr] < W9968CF_MIN_PACKET_SIZE)
2455 packet_size[dev_nr] = W9968CF_MIN_PACKET_SIZE;
2456 for (cam->altsetting = 1;
2457 packet_size[dev_nr] < wMaxPacketSize[cam->altsetting-1];
2458 cam->altsetting++);
2459
2460 cam->max_buffers = (max_buffers[dev_nr] < 2 ||
2461 max_buffers[dev_nr] > W9968CF_MAX_BUFFERS)
2462 ? W9968CF_BUFFERS : (u8)max_buffers[dev_nr];
2463
2464 cam->double_buffer = (double_buffer[dev_nr] == 0 ||
2465 double_buffer[dev_nr] == 1)
2466 ? (u8)double_buffer[dev_nr]:W9968CF_DOUBLE_BUFFER;
2467
2468 cam->clamping = (clamping[dev_nr] == 0 || clamping[dev_nr] == 1)
2469 ? (u8)clamping[dev_nr] : W9968CF_CLAMPING;
2470
2471 cam->filter_type = (filter_type[dev_nr] == 0 ||
2472 filter_type[dev_nr] == 1 ||
2473 filter_type[dev_nr] == 2)
2474 ? (u8)filter_type[dev_nr] : W9968CF_FILTER_TYPE;
2475
2476 cam->capture = 1;
2477
2478 cam->largeview = (largeview[dev_nr] == 0 || largeview[dev_nr] == 1)
2479 ? (u8)largeview[dev_nr] : W9968CF_LARGEVIEW;
2480
2481 cam->decompression = (decompression[dev_nr] == 0 ||
2482 decompression[dev_nr] == 1 ||
2483 decompression[dev_nr] == 2)
2484 ? (u8)decompression[dev_nr]:W9968CF_DECOMPRESSION;
2485
2486 cam->upscaling = (upscaling[dev_nr] == 0 ||
2487 upscaling[dev_nr] == 1)
2488 ? (u8)upscaling[dev_nr] : W9968CF_UPSCALING;
2489
2490 cam->auto_brt = (autobright[dev_nr] == 0 || autobright[dev_nr] == 1)
2491 ? (u8)autobright[dev_nr] : W9968CF_AUTOBRIGHT;
2492
2493 cam->auto_exp = (autoexp[dev_nr] == 0 || autoexp[dev_nr] == 1)
2494 ? (u8)autoexp[dev_nr] : W9968CF_AUTOEXP;
2495
2496 cam->lightfreq = (lightfreq[dev_nr] == 50 || lightfreq[dev_nr] == 60)
2497 ? (u8)lightfreq[dev_nr] : W9968CF_LIGHTFREQ;
2498
2499 cam->bandfilt = (bandingfilter[dev_nr] == 0 ||
2500 bandingfilter[dev_nr] == 1)
2501 ? (u8)bandingfilter[dev_nr] : W9968CF_BANDINGFILTER;
2502
2503 cam->backlight = (backlight[dev_nr] == 0 || backlight[dev_nr] == 1)
2504 ? (u8)backlight[dev_nr] : W9968CF_BACKLIGHT;
2505
2506 cam->clockdiv = (clockdiv[dev_nr] == -1 || clockdiv[dev_nr] >= 0)
2507 ? (s8)clockdiv[dev_nr] : W9968CF_CLOCKDIV;
2508
2509 cam->mirror = (mirror[dev_nr] == 0 || mirror[dev_nr] == 1)
2510 ? (u8)mirror[dev_nr] : W9968CF_MIRROR;
2511
2512 cam->monochrome = (monochrome[dev_nr] == 0 || monochrome[dev_nr] == 1)
2513 ? monochrome[dev_nr] : W9968CF_MONOCHROME;
2514
2515 cam->picture.brightness = (u16)brightness[dev_nr];
2516 cam->picture.hue = (u16)hue[dev_nr];
2517 cam->picture.colour = (u16)colour[dev_nr];
2518 cam->picture.contrast = (u16)contrast[dev_nr];
2519 cam->picture.whiteness = (u16)whiteness[dev_nr];
2520 if (w9968cf_valid_palette((u16)force_palette[dev_nr])) {
2521 cam->picture.palette = (u16)force_palette[dev_nr];
2522 cam->force_palette = 1;
2523 } else {
2524 cam->force_palette = 0;
2525 if (cam->decompression == 0)
2526 cam->picture.palette = W9968CF_PALETTE_DECOMP_OFF;
2527 else if (cam->decompression == 1)
2528 cam->picture.palette = W9968CF_PALETTE_DECOMP_FORCE;
2529 else
2530 cam->picture.palette = W9968CF_PALETTE_DECOMP_ON;
2531 }
2532 cam->picture.depth = w9968cf_valid_depth(cam->picture.palette);
2533
2534 cam->force_rgb = (force_rgb[dev_nr] == 0 || force_rgb[dev_nr] == 1)
2535 ? (u8)force_rgb[dev_nr] : W9968CF_FORCE_RGB;
2536
2537 cam->window.x = 0;
2538 cam->window.y = 0;
2539 cam->window.width = W9968CF_WIDTH;
2540 cam->window.height = W9968CF_HEIGHT;
2541 cam->window.chromakey = 0;
2542 cam->window.clipcount = 0;
2543 cam->window.flags = 0;
2544
2545 DBG(3, "%s configured with settings #%u:",
2546 symbolic(camlist, cam->id), dev_nr)
2547
2548 DBG(3, "- Data packet size for USB isochrnous transfer: %u bytes",
2549 wMaxPacketSize[cam->altsetting-1])
2550
2551 DBG(3, "- Number of requested video frame buffers: %u",
2552 cam->max_buffers)
2553
2554 if (cam->double_buffer)
2555 DBG(3, "- Hardware double buffering enabled")
2556 else
2557 DBG(3, "- Hardware double buffering disabled")
2558
2559 if (cam->filter_type == 0)
2560 DBG(3, "- Video filtering disabled")
2561 else if (cam->filter_type == 1)
2562 DBG(3, "- Video filtering enabled: type 1-2-1")
2563 else if (cam->filter_type == 2)
2564 DBG(3, "- Video filtering enabled: type 2-3-6-3-2")
2565
2566 if (cam->clamping)
2567 DBG(3, "- Video data clamping (CCIR-601 format) enabled")
2568 else
2569 DBG(3, "- Video data clamping (CCIR-601 format) disabled")
2570
2571 if (cam->largeview)
2572 DBG(3, "- Large view enabled")
2573 else
2574 DBG(3, "- Large view disabled")
2575
2576 if ((cam->decompression) == 0 && (!cam->force_palette))
2577 DBG(3, "- Decompression disabled")
2578 else if ((cam->decompression) == 1 && (!cam->force_palette))
2579 DBG(3, "- Decompression forced")
2580 else if ((cam->decompression) == 2 && (!cam->force_palette))
2581 DBG(3, "- Decompression allowed")
2582
2583 if (cam->upscaling)
2584 DBG(3, "- Software image scaling enabled")
2585 else
2586 DBG(3, "- Software image scaling disabled")
2587
2588 if (cam->force_palette)
2589 DBG(3, "- Image palette forced to %s",
2590 symbolic(v4l1_plist, cam->picture.palette))
2591
2592 if (cam->force_rgb)
2593 DBG(3, "- RGB component ordering will be used instead of BGR")
2594
2595 if (cam->auto_brt)
2596 DBG(3, "- Auto brightness enabled")
2597 else
2598 DBG(3, "- Auto brightness disabled")
2599
2600 if (cam->auto_exp)
2601 DBG(3, "- Auto exposure enabled")
2602 else
2603 DBG(3, "- Auto exposure disabled")
2604
2605 if (cam->backlight)
2606 DBG(3, "- Backlight exposure algorithm enabled")
2607 else
2608 DBG(3, "- Backlight exposure algorithm disabled")
2609
2610 if (cam->mirror)
2611 DBG(3, "- Mirror enabled")
2612 else
2613 DBG(3, "- Mirror disabled")
2614
2615 if (cam->bandfilt)
2616 DBG(3, "- Banding filter enabled")
2617 else
2618 DBG(3, "- Banding filter disabled")
2619
2620 DBG(3, "- Power lighting frequency: %u", cam->lightfreq)
2621
2622 if (cam->clockdiv == -1)
2623 DBG(3, "- Automatic clock divisor enabled")
2624 else
2625 DBG(3, "- Clock divisor: %d", cam->clockdiv)
2626
2627 if (cam->monochrome)
2628 DBG(3, "- Image sensor used as monochrome")
2629 else
2630 DBG(3, "- Image sensor not used as monochrome")
2631}
2632
2633
2634/*--------------------------------------------------------------------------
2635 If the video post-processing module is not loaded, some parameters
2636 must be overridden.
2637 --------------------------------------------------------------------------*/
2638static void w9968cf_adjust_configuration(struct w9968cf_device* cam)
2639{
2640 if (!w9968cf_vpp) {
2641 if (cam->decompression == 1) {
2642 cam->decompression = 2;
2643 DBG(2, "Video post-processing module not found: "
2644 "'decompression' parameter forced to 2")
2645 }
2646 if (cam->upscaling) {
2647 cam->upscaling = 0;
2648 DBG(2, "Video post-processing module not found: "
2649 "'upscaling' parameter forced to 0")
2650 }
2651 if (cam->picture.palette != VIDEO_PALETTE_UYVY) {
2652 cam->force_palette = 0;
2653 DBG(2, "Video post-processing module not found: "
2654 "'force_palette' parameter forced to 0")
2655 }
2656 cam->picture.palette = VIDEO_PALETTE_UYVY;
2657 cam->picture.depth = w9968cf_valid_depth(cam->picture.palette);
2658 }
2659}
2660
2661
2662/*--------------------------------------------------------------------------
2663 Release the resources used by the driver.
2664 This function is called on disconnect
2665 (or on close if deallocation has been deferred)
2666 --------------------------------------------------------------------------*/
2667static void w9968cf_release_resources(struct w9968cf_device* cam)
2668{
2669 down(&w9968cf_devlist_sem);
2670
2671 DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->minor)
2672
2673 video_unregister_device(cam->v4ldev);
2674 list_del(&cam->v4llist);
2675 i2c_del_adapter(&cam->i2c_adapter);
2676 w9968cf_deallocate_memory(cam);
2677 kfree(cam->control_buffer);
2678 kfree(cam->data_buffer);
2679
2680 up(&w9968cf_devlist_sem);
2681}
2682
2683
2684
2685/****************************************************************************
2686 * Video4Linux interface *
2687 ****************************************************************************/
2688
2689static int w9968cf_open(struct inode* inode, struct file* filp)
2690{
2691 struct w9968cf_device* cam;
2692 int err;
2693
2694 /* This the only safe way to prevent race conditions with disconnect */
2695 if (!down_read_trylock(&w9968cf_disconnect))
2696 return -ERESTARTSYS;
2697
2698 cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
2699
2700 down(&cam->dev_sem);
2701
2702 if (cam->sensor == CC_UNKNOWN) {
2703 DBG(2, "No supported image sensor has been detected by the "
2704 "'ovcamchip' module for the %s (/dev/video%d). Make "
2705 "sure it is loaded *before* (re)connecting the camera.",
2706 symbolic(camlist, cam->id), cam->v4ldev->minor)
2707 up(&cam->dev_sem);
2708 up_read(&w9968cf_disconnect);
2709 return -ENODEV;
2710 }
2711
2712 if (cam->users) {
2713 DBG(2, "%s (/dev/video%d) has been already occupied by '%s'",
2714 symbolic(camlist, cam->id),cam->v4ldev->minor,cam->command)
2715 if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) {
2716 up(&cam->dev_sem);
2717 up_read(&w9968cf_disconnect);
2718 return -EWOULDBLOCK;
2719 }
2720 up(&cam->dev_sem);
2721 err = wait_event_interruptible_exclusive(cam->open,
2722 cam->disconnected ||
2723 !cam->users);
2724 if (err) {
2725 up_read(&w9968cf_disconnect);
2726 return err;
2727 }
2728 if (cam->disconnected) {
2729 up_read(&w9968cf_disconnect);
2730 return -ENODEV;
2731 }
2732 down(&cam->dev_sem);
2733 }
2734
2735 DBG(5, "Opening '%s', /dev/video%d ...",
2736 symbolic(camlist, cam->id), cam->v4ldev->minor)
2737
2738 cam->streaming = 0;
2739 cam->misconfigured = 0;
2740
2741 if (!w9968cf_vpp)
2742 if ((err = w9968cf_vppmod_detect(cam)))
2743 goto out;
2744
2745 if ((err = w9968cf_allocate_memory(cam)))
2746 goto deallocate_memory;
2747
2748 if ((err = w9968cf_init_chip(cam)))
2749 goto deallocate_memory;
2750
2751 if ((err = w9968cf_start_transfer(cam)))
2752 goto deallocate_memory;
2753
2754 filp->private_data = cam;
2755
2756 cam->users++;
2757 strcpy(cam->command, current->comm);
2758
2759 init_waitqueue_head(&cam->wait_queue);
2760
2761 DBG(5, "Video device is open")
2762
2763 up(&cam->dev_sem);
2764 up_read(&w9968cf_disconnect);
2765
2766 return 0;
2767
2768deallocate_memory:
2769 w9968cf_deallocate_memory(cam);
2770out:
2771 DBG(2, "Failed to open the video device")
2772 up(&cam->dev_sem);
2773 up_read(&w9968cf_disconnect);
2774 return err;
2775}
2776
2777
2778static int w9968cf_release(struct inode* inode, struct file* filp)
2779{
2780 struct w9968cf_device* cam;
2781
2782 cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
2783
2784 down(&cam->dev_sem); /* prevent disconnect() to be called */
2785
2786 w9968cf_stop_transfer(cam);
2787
2788 w9968cf_vppmod_release(cam);
2789
2790 if (cam->disconnected) {
2791 w9968cf_release_resources(cam);
2792 up(&cam->dev_sem);
2793 kfree(cam);
2794 return 0;
2795 }
2796
2797 cam->users--;
2798 w9968cf_deallocate_memory(cam);
2799 wake_up_interruptible_nr(&cam->open, 1);
2800
2801 DBG(5, "Video device closed")
2802 up(&cam->dev_sem);
2803 return 0;
2804}
2805
2806
2807static ssize_t
2808w9968cf_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos)
2809{
2810 struct w9968cf_device* cam;
2811 struct w9968cf_frame_t* fr;
2812 int err = 0;
2813
2814 cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
2815
2816 if (filp->f_flags & O_NONBLOCK)
2817 return -EWOULDBLOCK;
2818
2819 if (down_interruptible(&cam->fileop_sem))
2820 return -ERESTARTSYS;
2821
2822 if (cam->disconnected) {
2823 DBG(2, "Device not present")
2824 up(&cam->fileop_sem);
2825 return -ENODEV;
2826 }
2827
2828 if (cam->misconfigured) {
2829 DBG(2, "The camera is misconfigured. Close and open it again.")
2830 up(&cam->fileop_sem);
2831 return -EIO;
2832 }
2833
2834 if (!cam->frame[0].queued)
2835 w9968cf_push_frame(cam, 0);
2836
2837 if (!cam->frame[1].queued)
2838 w9968cf_push_frame(cam, 1);
2839
2840 err = wait_event_interruptible(cam->wait_queue,
2841 cam->frame[0].status == F_READY ||
2842 cam->frame[1].status == F_READY ||
2843 cam->disconnected);
2844 if (err) {
2845 up(&cam->fileop_sem);
2846 return err;
2847 }
2848 if (cam->disconnected) {
2849 up(&cam->fileop_sem);
2850 return -ENODEV;
2851 }
2852
2853 fr = (cam->frame[0].status == F_READY) ? &cam->frame[0]:&cam->frame[1];
2854
2855 if (w9968cf_vpp)
2856 w9968cf_postprocess_frame(cam, fr);
2857
2858 if (count > fr->length)
2859 count = fr->length;
2860
2861 if (copy_to_user(buf, fr->buffer, count)) {
2862 fr->status = F_UNUSED;
2863 up(&cam->fileop_sem);
2864 return -EFAULT;
2865 }
2866 *f_pos += count;
2867
2868 fr->status = F_UNUSED;
2869
2870 DBG(5, "%zu bytes read", count)
2871
2872 up(&cam->fileop_sem);
2873 return count;
2874}
2875
2876
2877static int w9968cf_mmap(struct file* filp, struct vm_area_struct *vma)
2878{
2879 struct w9968cf_device* cam = (struct w9968cf_device*)
2880 video_get_drvdata(video_devdata(filp));
2881 unsigned long vsize = vma->vm_end - vma->vm_start,
2882 psize = cam->nbuffers * cam->frame[0].size,
2883 start = vma->vm_start,
2884 pos = (unsigned long)cam->frame[0].buffer,
2885 page;
2886
2887 if (cam->disconnected) {
2888 DBG(2, "Device not present")
2889 return -ENODEV;
2890 }
2891
2892 if (cam->misconfigured) {
2893 DBG(2, "The camera is misconfigured. Close and open it again")
2894 return -EIO;
2895 }
2896
2897 PDBGG("mmapping %lu bytes...", vsize)
2898
2899 if (vsize > psize - (vma->vm_pgoff << PAGE_SHIFT))
2900 return -EINVAL;
2901
2902 while (vsize > 0) {
2903 page = vmalloc_to_pfn((void *)pos);
2904 if (remap_pfn_range(vma, start, page + vma->vm_pgoff,
2905 PAGE_SIZE, vma->vm_page_prot))
2906 return -EAGAIN;
2907 start += PAGE_SIZE;
2908 pos += PAGE_SIZE;
2909 vsize -= PAGE_SIZE;
2910 }
2911
2912 DBG(5, "mmap method successfully called")
2913 return 0;
2914}
2915
2916
2917static int
2918w9968cf_ioctl(struct inode* inode, struct file* filp,
2919 unsigned int cmd, unsigned long arg)
2920{
2921 struct w9968cf_device* cam;
2922 int err;
2923
2924 cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
2925
2926 if (down_interruptible(&cam->fileop_sem))
2927 return -ERESTARTSYS;
2928
2929 if (cam->disconnected) {
2930 DBG(2, "Device not present")
2931 up(&cam->fileop_sem);
2932 return -ENODEV;
2933 }
2934
2935 if (cam->misconfigured) {
2936 DBG(2, "The camera is misconfigured. Close and open it again.")
2937 up(&cam->fileop_sem);
2938 return -EIO;
2939 }
2940
2941 err = w9968cf_v4l_ioctl(inode, filp, cmd, (void __user *)arg);
2942
2943 up(&cam->fileop_sem);
2944 return err;
2945}
2946
2947
2948static int w9968cf_v4l_ioctl(struct inode* inode, struct file* filp,
2949 unsigned int cmd, void __user * arg)
2950{
2951 struct w9968cf_device* cam;
2952 const char* v4l1_ioctls[] = {
2953 "?", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER",
2954 "GPICT", "SPICT", "CCAPTURE", "GWIN", "SWIN", "GFBUF",
2955 "SFBUF", "KEY", "GFREQ", "SFREQ", "GAUDIO", "SAUDIO",
2956 "SYNC", "MCAPTURE", "GMBUF", "GUNIT", "GCAPTURE", "SCAPTURE",
2957 "SPLAYMODE", "SWRITEMODE", "GPLAYINFO", "SMICROCODE",
2958 "GVBIFMT", "SVBIFMT"
2959 };
2960
2961 #define V4L1_IOCTL(cmd) \
2962 ((_IOC_NR((cmd)) < sizeof(v4l1_ioctls)/sizeof(char*)) ? \
2963 v4l1_ioctls[_IOC_NR((cmd))] : "?")
2964
2965 cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp));
2966
2967 switch (cmd) {
2968
2969 case VIDIOCGCAP: /* get video capability */
2970 {
2971 struct video_capability cap = {
2972 .type = VID_TYPE_CAPTURE | VID_TYPE_SCALES,
2973 .channels = 1,
2974 .audios = 0,
2975 .minwidth = cam->minwidth,
2976 .minheight = cam->minheight,
2977 };
2978 sprintf(cap.name, "W996[87]CF USB Camera #%d",
2979 cam->v4ldev->minor);
2980 cap.maxwidth = (cam->upscaling && w9968cf_vpp)
2981 ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth)
2982 : cam->maxwidth;
2983 cap.maxheight = (cam->upscaling && w9968cf_vpp)
2984 ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight)
2985 : cam->maxheight;
2986
2987 if (copy_to_user(arg, &cap, sizeof(cap)))
2988 return -EFAULT;
2989
2990 DBG(5, "VIDIOCGCAP successfully called")
2991 return 0;
2992 }
2993
2994 case VIDIOCGCHAN: /* get video channel informations */
2995 {
2996 struct video_channel chan;
2997 if (copy_from_user(&chan, arg, sizeof(chan)))
2998 return -EFAULT;
2999
3000 if (chan.channel != 0)
3001 return -EINVAL;
3002
3003 strcpy(chan.name, "Camera");
3004 chan.tuners = 0;
3005 chan.flags = 0;
3006 chan.type = VIDEO_TYPE_CAMERA;
3007 chan.norm = VIDEO_MODE_AUTO;
3008
3009 if (copy_to_user(arg, &chan, sizeof(chan)))
3010 return -EFAULT;
3011
3012 DBG(5, "VIDIOCGCHAN successfully called")
3013 return 0;
3014 }
3015
3016 case VIDIOCSCHAN: /* set active channel */
3017 {
3018 struct video_channel chan;
3019
3020 if (copy_from_user(&chan, arg, sizeof(chan)))
3021 return -EFAULT;
3022
3023 if (chan.channel != 0)
3024 return -EINVAL;
3025
3026 DBG(5, "VIDIOCSCHAN successfully called")
3027 return 0;
3028 }
3029
3030 case VIDIOCGPICT: /* get image properties of the picture */
3031 {
3032 if (w9968cf_sensor_get_picture(cam))
3033 return -EIO;
3034
3035 if (copy_to_user(arg, &cam->picture, sizeof(cam->picture)))
3036 return -EFAULT;
3037
3038 DBG(5, "VIDIOCGPICT successfully called")
3039 return 0;
3040 }
3041
3042 case VIDIOCSPICT: /* change picture settings */
3043 {
3044 struct video_picture pict;
3045 int err = 0;
3046
3047 if (copy_from_user(&pict, arg, sizeof(pict)))
3048 return -EFAULT;
3049
3050 if ( (cam->force_palette || !w9968cf_vpp)
3051 && pict.palette != cam->picture.palette ) {
3052 DBG(4, "Palette %s rejected: only %s is allowed",
3053 symbolic(v4l1_plist, pict.palette),
3054 symbolic(v4l1_plist, cam->picture.palette))
3055 return -EINVAL;
3056 }
3057
3058 if (!w9968cf_valid_palette(pict.palette)) {
3059 DBG(4, "Palette %s not supported. VIDIOCSPICT failed",
3060 symbolic(v4l1_plist, pict.palette))
3061 return -EINVAL;
3062 }
3063
3064 if (!cam->force_palette) {
3065 if (cam->decompression == 0) {
3066 if (w9968cf_need_decompression(pict.palette)) {
3067 DBG(4, "Decompression disabled: palette %s is not "
3068 "allowed. VIDIOCSPICT failed",
3069 symbolic(v4l1_plist, pict.palette))
3070 return -EINVAL;
3071 }
3072 } else if (cam->decompression == 1) {
3073 if (!w9968cf_need_decompression(pict.palette)) {
3074 DBG(4, "Decompression forced: palette %s is not "
3075 "allowed. VIDIOCSPICT failed",
3076 symbolic(v4l1_plist, pict.palette))
3077 return -EINVAL;
3078 }
3079 }
3080 }
3081
3082 if (pict.depth != w9968cf_valid_depth(pict.palette)) {
3083 DBG(4, "Requested depth %u bpp is not valid for %s "
3084 "palette: ignored and changed to %u bpp",
3085 pict.depth, symbolic(v4l1_plist, pict.palette),
3086 w9968cf_valid_depth(pict.palette))
3087 pict.depth = w9968cf_valid_depth(pict.palette);
3088 }
3089
3090 if (pict.palette != cam->picture.palette) {
3091 if(*cam->requested_frame
3092 || cam->frame_current->queued) {
3093 err = wait_event_interruptible
3094 ( cam->wait_queue,
3095 cam->disconnected ||
3096 (!*cam->requested_frame &&
3097 !cam->frame_current->queued) );
3098 if (err)
3099 return err;
3100 if (cam->disconnected)
3101 return -ENODEV;
3102 }
3103
3104 if (w9968cf_stop_transfer(cam))
3105 goto ioctl_fail;
3106
3107 if (w9968cf_set_picture(cam, pict))
3108 goto ioctl_fail;
3109
3110 if (w9968cf_start_transfer(cam))
3111 goto ioctl_fail;
3112
3113 } else if (w9968cf_sensor_update_picture(cam, pict))
3114 return -EIO;
3115
3116
3117 DBG(5, "VIDIOCSPICT successfully called")
3118 return 0;
3119 }
3120
3121 case VIDIOCSWIN: /* set capture area */
3122 {
3123 struct video_window win;
3124 int err = 0;
3125
3126 if (copy_from_user(&win, arg, sizeof(win)))
3127 return -EFAULT;
3128
3129 DBG(6, "VIDIOCSWIN called: clipcount=%d, flags=%u, "
3130 "x=%u, y=%u, %ux%u", win.clipcount, win.flags,
3131 win.x, win.y, win.width, win.height)
3132
3133 if (win.clipcount != 0 || win.flags != 0)
3134 return -EINVAL;
3135
3136 if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width,
3137 (u16*)&win.height))) {
3138 DBG(4, "Resolution not supported (%ux%u). "
3139 "VIDIOCSWIN failed", win.width, win.height)
3140 return err;
3141 }
3142
3143 if (win.x != cam->window.x ||
3144 win.y != cam->window.y ||
3145 win.width != cam->window.width ||
3146 win.height != cam->window.height) {
3147 if(*cam->requested_frame
3148 || cam->frame_current->queued) {
3149 err = wait_event_interruptible
3150 ( cam->wait_queue,
3151 cam->disconnected ||
3152 (!*cam->requested_frame &&
3153 !cam->frame_current->queued) );
3154 if (err)
3155 return err;
3156 if (cam->disconnected)
3157 return -ENODEV;
3158 }
3159
3160 if (w9968cf_stop_transfer(cam))
3161 goto ioctl_fail;
3162
3163 /* This _must_ be called before set_window() */
3164 if (w9968cf_set_picture(cam, cam->picture))
3165 goto ioctl_fail;
3166
3167 if (w9968cf_set_window(cam, win))
3168 goto ioctl_fail;
3169
3170 if (w9968cf_start_transfer(cam))
3171 goto ioctl_fail;
3172 }
3173
3174 DBG(5, "VIDIOCSWIN successfully called. ")
3175 return 0;
3176 }
3177
3178 case VIDIOCGWIN: /* get current window properties */
3179 {
3180 if (copy_to_user(arg,&cam->window,sizeof(struct video_window)))
3181 return -EFAULT;
3182
3183 DBG(5, "VIDIOCGWIN successfully called")
3184 return 0;
3185 }
3186
3187 case VIDIOCGMBUF: /* request for memory (mapped) buffer */
3188 {
3189 struct video_mbuf mbuf;
3190 u8 i;
3191
3192 mbuf.size = cam->nbuffers * cam->frame[0].size;
3193 mbuf.frames = cam->nbuffers;
3194 for (i = 0; i < cam->nbuffers; i++)
3195 mbuf.offsets[i] = (unsigned long)cam->frame[i].buffer -
3196 (unsigned long)cam->frame[0].buffer;
3197
3198 if (copy_to_user(arg, &mbuf, sizeof(mbuf)))
3199 return -EFAULT;
3200
3201 DBG(5, "VIDIOCGMBUF successfully called")
3202 return 0;
3203 }
3204
3205 case VIDIOCMCAPTURE: /* start the capture to a frame */
3206 {
3207 struct video_mmap mmap;
3208 struct w9968cf_frame_t* fr;
3209 int err = 0;
3210
3211 if (copy_from_user(&mmap, arg, sizeof(mmap)))
3212 return -EFAULT;
3213
3214 DBG(6, "VIDIOCMCAPTURE called: frame #%u, format=%s, %dx%d",
3215 mmap.frame, symbolic(v4l1_plist, mmap.format),
3216 mmap.width, mmap.height)
3217
3218 if (mmap.frame >= cam->nbuffers) {
3219 DBG(4, "Invalid frame number (%u). "
3220 "VIDIOCMCAPTURE failed", mmap.frame)
3221 return -EINVAL;
3222 }
3223
3224 if (mmap.format!=cam->picture.palette &&
3225 (cam->force_palette || !w9968cf_vpp)) {
3226 DBG(4, "Palette %s rejected: only %s is allowed",
3227 symbolic(v4l1_plist, mmap.format),
3228 symbolic(v4l1_plist, cam->picture.palette))
3229 return -EINVAL;
3230 }
3231
3232 if (!w9968cf_valid_palette(mmap.format)) {
3233 DBG(4, "Palette %s not supported. "
3234 "VIDIOCMCAPTURE failed",
3235 symbolic(v4l1_plist, mmap.format))
3236 return -EINVAL;
3237 }
3238
3239 if (!cam->force_palette) {
3240 if (cam->decompression == 0) {
3241 if (w9968cf_need_decompression(mmap.format)) {
3242 DBG(4, "Decompression disabled: palette %s is not "
3243 "allowed. VIDIOCSPICT failed",
3244 symbolic(v4l1_plist, mmap.format))
3245 return -EINVAL;
3246 }
3247 } else if (cam->decompression == 1) {
3248 if (!w9968cf_need_decompression(mmap.format)) {
3249 DBG(4, "Decompression forced: palette %s is not "
3250 "allowed. VIDIOCSPICT failed",
3251 symbolic(v4l1_plist, mmap.format))
3252 return -EINVAL;
3253 }
3254 }
3255 }
3256
3257 if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width,
3258 (u16*)&mmap.height))) {
3259 DBG(4, "Resolution not supported (%dx%d). "
3260 "VIDIOCMCAPTURE failed",
3261 mmap.width, mmap.height)
3262 return err;
3263 }
3264
3265 fr = &cam->frame[mmap.frame];
3266
3267 if (mmap.width != cam->window.width ||
3268 mmap.height != cam->window.height ||
3269 mmap.format != cam->picture.palette) {
3270
3271 struct video_window win;
3272 struct video_picture pict;
3273
3274 if(*cam->requested_frame
3275 || cam->frame_current->queued) {
3276 DBG(6, "VIDIOCMCAPTURE. Change settings for "
3277 "frame #%u: %dx%d, format %s. Wait...",
3278 mmap.frame, mmap.width, mmap.height,
3279 symbolic(v4l1_plist, mmap.format))
3280 err = wait_event_interruptible
3281 ( cam->wait_queue,
3282 cam->disconnected ||
3283 (!*cam->requested_frame &&
3284 !cam->frame_current->queued) );
3285 if (err)
3286 return err;
3287 if (cam->disconnected)
3288 return -ENODEV;
3289 }
3290
3291 memcpy(&win, &cam->window, sizeof(win));
3292 memcpy(&pict, &cam->picture, sizeof(pict));
3293 win.width = mmap.width;
3294 win.height = mmap.height;
3295 pict.palette = mmap.format;
3296
3297 if (w9968cf_stop_transfer(cam))
3298 goto ioctl_fail;
3299
3300 /* This before set_window */
3301 if (w9968cf_set_picture(cam, pict))
3302 goto ioctl_fail;
3303
3304 if (w9968cf_set_window(cam, win))
3305 goto ioctl_fail;
3306
3307 if (w9968cf_start_transfer(cam))
3308 goto ioctl_fail;
3309
3310 } else if (fr->queued) {
3311
3312 DBG(6, "Wait until frame #%u is free", mmap.frame)
3313
3314 err = wait_event_interruptible(cam->wait_queue,
3315 cam->disconnected ||
3316 (!fr->queued));
3317 if (err)
3318 return err;
3319 if (cam->disconnected)
3320 return -ENODEV;
3321 }
3322
3323 w9968cf_push_frame(cam, mmap.frame);
3324 DBG(5, "VIDIOCMCAPTURE(%u): successfully called", mmap.frame)
3325 return 0;
3326 }
3327
3328 case VIDIOCSYNC: /* wait until the capture of a frame is finished */
3329 {
3330 unsigned int f_num;
3331 struct w9968cf_frame_t* fr;
3332 int err = 0;
3333
3334 if (copy_from_user(&f_num, arg, sizeof(f_num)))
3335 return -EFAULT;
3336
3337 if (f_num >= cam->nbuffers) {
3338 DBG(4, "Invalid frame number (%u). "
3339 "VIDIOCMCAPTURE failed", f_num)
3340 return -EINVAL;
3341 }
3342
3343 DBG(6, "VIDIOCSYNC called for frame #%u", f_num)
3344
3345 fr = &cam->frame[f_num];
3346
3347 switch (fr->status) {
3348 case F_UNUSED:
3349 if (!fr->queued) {
3350 DBG(4, "VIDIOSYNC: Frame #%u not requested!",
3351 f_num)
3352 return -EFAULT;
3353 }
3354 case F_ERROR:
3355 case F_GRABBING:
3356 err = wait_event_interruptible(cam->wait_queue,
3357 (fr->status == F_READY)
3358 || cam->disconnected);
3359 if (err)
3360 return err;
3361 if (cam->disconnected)
3362 return -ENODEV;
3363 break;
3364 case F_READY:
3365 break;
3366 }
3367
3368 if (w9968cf_vpp)
3369 w9968cf_postprocess_frame(cam, fr);
3370
3371 fr->status = F_UNUSED;
3372
3373 DBG(5, "VIDIOCSYNC(%u) successfully called", f_num)
3374 return 0;
3375 }
3376
3377 case VIDIOCGUNIT:/* report the unit numbers of the associated devices*/
3378 {
3379 struct video_unit unit = {
3380 .video = cam->v4ldev->minor,
3381 .vbi = VIDEO_NO_UNIT,
3382 .radio = VIDEO_NO_UNIT,
3383 .audio = VIDEO_NO_UNIT,
3384 .teletext = VIDEO_NO_UNIT,
3385 };
3386
3387 if (copy_to_user(arg, &unit, sizeof(unit)))
3388 return -EFAULT;
3389
3390 DBG(5, "VIDIOCGUNIT successfully called")
3391 return 0;
3392 }
3393
3394 case VIDIOCKEY:
3395 return 0;
3396
3397 case VIDIOCGFBUF:
3398 {
3399 if (clear_user(arg, sizeof(struct video_buffer)))
3400 return -EFAULT;
3401
3402 DBG(5, "VIDIOCGFBUF successfully called")
3403 return 0;
3404 }
3405
3406 case VIDIOCGTUNER:
3407 {
3408 struct video_tuner tuner;
3409 if (copy_from_user(&tuner, arg, sizeof(tuner)))
3410 return -EFAULT;
3411
3412 if (tuner.tuner != 0)
3413 return -EINVAL;
3414
3415 strcpy(tuner.name, "no_tuner");
3416 tuner.rangelow = 0;
3417 tuner.rangehigh = 0;
3418 tuner.flags = VIDEO_TUNER_NORM;
3419 tuner.mode = VIDEO_MODE_AUTO;
3420 tuner.signal = 0xffff;
3421
3422 if (copy_to_user(arg, &tuner, sizeof(tuner)))
3423 return -EFAULT;
3424
3425 DBG(5, "VIDIOCGTUNER successfully called")
3426 return 0;
3427 }
3428
3429 case VIDIOCSTUNER:
3430 {
3431 struct video_tuner tuner;
3432 if (copy_from_user(&tuner, arg, sizeof(tuner)))
3433 return -EFAULT;
3434
3435 if (tuner.tuner != 0)
3436 return -EINVAL;
3437
3438 if (tuner.mode != VIDEO_MODE_AUTO)
3439 return -EINVAL;
3440
3441 DBG(5, "VIDIOCSTUNER successfully called")
3442 return 0;
3443 }
3444
3445 case VIDIOCSFBUF:
3446 case VIDIOCCAPTURE:
3447 case VIDIOCGFREQ:
3448 case VIDIOCSFREQ:
3449 case VIDIOCGAUDIO:
3450 case VIDIOCSAUDIO:
3451 case VIDIOCSPLAYMODE:
3452 case VIDIOCSWRITEMODE:
3453 case VIDIOCGPLAYINFO:
3454 case VIDIOCSMICROCODE:
3455 case VIDIOCGVBIFMT:
3456 case VIDIOCSVBIFMT:
3457 DBG(4, "Unsupported V4L1 IOCtl: VIDIOC%s "
3458 "(type 0x%01X, "
3459 "n. 0x%01X, "
3460 "dir. 0x%01X, "
3461 "size 0x%02X)",
3462 V4L1_IOCTL(cmd),
3463 _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd))
3464
3465 return -EINVAL;
3466
3467 default:
3468 DBG(4, "Invalid V4L1 IOCtl: VIDIOC%s "
3469 "type 0x%01X, "
3470 "n. 0x%01X, "
3471 "dir. 0x%01X, "
3472 "size 0x%02X",
3473 V4L1_IOCTL(cmd),
3474 _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd))
3475
3476 return -ENOIOCTLCMD;
3477
3478 } /* end of switch */
3479
3480ioctl_fail:
3481 cam->misconfigured = 1;
3482 DBG(1, "VIDIOC%s failed because of hardware problems. "
3483 "To use the camera, close and open it again.", V4L1_IOCTL(cmd))
3484 return -EFAULT;
3485}
3486
3487
3488static struct file_operations w9968cf_fops = {
3489 .owner = THIS_MODULE,
3490 .open = w9968cf_open,
3491 .release = w9968cf_release,
3492 .read = w9968cf_read,
3493 .ioctl = w9968cf_ioctl,
3494 .mmap = w9968cf_mmap,
3495 .llseek = no_llseek,
3496};
3497
3498
3499
3500/****************************************************************************
3501 * USB probe and V4L registration, disconnect and id_table[] definition *
3502 ****************************************************************************/
3503
3504static int
3505w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
3506{
3507 struct usb_device *udev = interface_to_usbdev(intf);
3508 struct w9968cf_device* cam;
3509 int err = 0;
3510 enum w9968cf_model_id mod_id;
3511 struct list_head* ptr;
3512 u8 sc = 0; /* number of simultaneous cameras */
3513 static unsigned short dev_nr = 0; /* we are handling device number n */
3514
3515 if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[0].idVendor &&
3516 le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct)
3517 mod_id = W9968CF_MOD_CLVBWGP; /* see camlist[] table */
3518 else if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[1].idVendor &&
3519 le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[1].idProduct)
3520 mod_id = W9968CF_MOD_GENERIC; /* see camlist[] table */
3521 else
3522 return -ENODEV;
3523
3524 cam = (struct w9968cf_device*)
3525 kmalloc(sizeof(struct w9968cf_device), GFP_KERNEL);
3526 if (!cam)
3527 return -ENOMEM;
3528
3529 memset(cam, 0, sizeof(*cam));
3530
3531 init_MUTEX(&cam->dev_sem);
3532 down(&cam->dev_sem);
3533
3534 cam->usbdev = udev;
3535 /* NOTE: a local copy is used to avoid possible race conditions */
3536 memcpy(&cam->dev, &udev->dev, sizeof(struct device));
3537
3538 DBG(2, "%s detected", symbolic(camlist, mod_id))
3539
3540 if (simcams > W9968CF_MAX_DEVICES)
3541 simcams = W9968CF_SIMCAMS;
3542
3543 /* How many cameras are connected ? */
3544 down(&w9968cf_devlist_sem);
3545 list_for_each(ptr, &w9968cf_dev_list)
3546 sc++;
3547 up(&w9968cf_devlist_sem);
3548
3549 if (sc >= simcams) {
3550 DBG(2, "Device rejected: too many connected cameras "
3551 "(max. %u)", simcams)
3552 err = -EPERM;
3553 goto fail;
3554 }
3555
3556
3557 /* Allocate 2 bytes of memory for camera control USB transfers */
3558 if (!(cam->control_buffer = (u16*)kmalloc(2, GFP_KERNEL))) {
3559 DBG(1,"Couldn't allocate memory for camera control transfers")
3560 err = -ENOMEM;
3561 goto fail;
3562 }
3563 memset(cam->control_buffer, 0, 2);
3564
3565 /* Allocate 8 bytes of memory for USB data transfers to the FSB */
3566 if (!(cam->data_buffer = (u16*)kmalloc(8, GFP_KERNEL))) {
3567 DBG(1, "Couldn't allocate memory for data "
3568 "transfers to the FSB")
3569 err = -ENOMEM;
3570 goto fail;
3571 }
3572 memset(cam->data_buffer, 0, 8);
3573
3574 /* Register the V4L device */
3575 cam->v4ldev = video_device_alloc();
3576 if (!cam->v4ldev) {
3577 DBG(1, "Could not allocate memory for a V4L structure")
3578 err = -ENOMEM;
3579 goto fail;
3580 }
3581
3582 strcpy(cam->v4ldev->name, symbolic(camlist, mod_id));
3583 cam->v4ldev->owner = THIS_MODULE;
3584 cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
3585 cam->v4ldev->hardware = VID_HARDWARE_W9968CF;
3586 cam->v4ldev->fops = &w9968cf_fops;
3587 cam->v4ldev->minor = video_nr[dev_nr];
3588 cam->v4ldev->release = video_device_release;
3589 video_set_drvdata(cam->v4ldev, cam);
3590 cam->v4ldev->dev = &cam->dev;
3591
3592 err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
3593 video_nr[dev_nr]);
3594 if (err) {
3595 DBG(1, "V4L device registration failed")
3596 if (err == -ENFILE && video_nr[dev_nr] == -1)
3597 DBG(2, "Couldn't find a free /dev/videoX node")
3598 video_nr[dev_nr] = -1;
3599 dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0;
3600 goto fail;
3601 }
3602
3603 DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->minor)
3604
3605 /* Set some basic constants */
3606 w9968cf_configure_camera(cam, udev, mod_id, dev_nr);
3607
3608 /* Add a new entry into the list of V4L registered devices */
3609 down(&w9968cf_devlist_sem);
3610 list_add(&cam->v4llist, &w9968cf_dev_list);
3611 up(&w9968cf_devlist_sem);
3612 dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0;
3613
3614 w9968cf_turn_on_led(cam);
3615
3616 w9968cf_i2c_init(cam);
3617
3618 usb_set_intfdata(intf, cam);
3619 up(&cam->dev_sem);
3620 return 0;
3621
3622fail: /* Free unused memory */
1bc3c9e1
JJ		 3623 kfree(cam->control_buffer);
3624 kfree(cam->data_buffer);
1da177e4
LT		 3625 if (cam->v4ldev)
3626 video_device_release(cam->v4ldev);
3627 up(&cam->dev_sem);
3628 kfree(cam);
3629 return err;
3630}
3631
3632
3633static void w9968cf_usb_disconnect(struct usb_interface* intf)
3634{
3635 struct w9968cf_device* cam =
3636 (struct w9968cf_device*)usb_get_intfdata(intf);
3637
3638 down_write(&w9968cf_disconnect);
3639
3640 if (cam) {
3641 /* Prevent concurrent accesses to data */
3642 down(&cam->dev_sem);
3643
3644 cam->disconnected = 1;
3645
3646 DBG(2, "Disconnecting %s...", symbolic(camlist, cam->id))
3647
3648 wake_up_interruptible_all(&cam->open);
3649
3650 if (cam->users) {
3651 DBG(2, "The device is open (/dev/video%d)! "
3652 "Process name: %s. Deregistration and memory "
3653 "deallocation are deferred on close.",
3654 cam->v4ldev->minor, cam->command)
3655 cam->misconfigured = 1;
3656 w9968cf_stop_transfer(cam);
3657 wake_up_interruptible(&cam->wait_queue);
3658 } else
3659 w9968cf_release_resources(cam);
3660
3661 up(&cam->dev_sem);
3662
3663 if (!cam->users)
3664 kfree(cam);
3665 }
3666
3667 up_write(&w9968cf_disconnect);
3668}
3669
3670
3671static struct usb_driver w9968cf_usb_driver = {
3672 .owner = THIS_MODULE,
3673 .name = "w9968cf",
3674 .id_table = winbond_id_table,
3675 .probe = w9968cf_usb_probe,
3676 .disconnect = w9968cf_usb_disconnect,
3677};
3678
3679
3680
3681/****************************************************************************
3682 * Module init, exit and intermodule communication *
3683 ****************************************************************************/
3684
3685static int w9968cf_vppmod_detect(struct w9968cf_device* cam)
3686{
3687 if (!w9968cf_vpp)
3688 if (vppmod_load)
3689 request_module("w9968cf-vpp");
3690
3691 down(&w9968cf_vppmod_lock);
3692
3693 if (!w9968cf_vpp) {
3694 DBG(4, "Video post-processing module not detected")
3695 w9968cf_adjust_configuration(cam);
3696 goto out;
3697 }
3698
3699 if (!try_module_get(w9968cf_vpp->owner)) {
3700 DBG(1, "Couldn't increment the reference count of "
3701 "the video post-processing module")
3702 up(&w9968cf_vppmod_lock);
3703 return -ENOSYS;
3704 }
3705
3706 w9968cf_vpp->busy++;
3707
3708 DBG(5, "Video post-processing module detected")
3709
3710out:
3711 up(&w9968cf_vppmod_lock);
3712 return 0;
3713}
3714
3715
3716static void w9968cf_vppmod_release(struct w9968cf_device* cam)
3717{
3718 down(&w9968cf_vppmod_lock);
3719
3720 if (w9968cf_vpp && w9968cf_vpp->busy) {
3721 module_put(w9968cf_vpp->owner);
3722 w9968cf_vpp->busy--;
3723 wake_up(&w9968cf_vppmod_wait);
3724 DBG(5, "Video post-processing module released")
3725 }
3726
3727 up(&w9968cf_vppmod_lock);
3728}
3729
3730
3731int w9968cf_vppmod_register(struct w9968cf_vpp_t* vpp)
3732{
3733 down(&w9968cf_vppmod_lock);
3734
3735 if (w9968cf_vpp) {
3736 KDBG(1, "Video post-processing module already registered")
3737 up(&w9968cf_vppmod_lock);
3738 return -EINVAL;
3739 }
3740
3741 w9968cf_vpp = vpp;
3742 w9968cf_vpp->busy = 0;
3743
3744 KDBG(2, "Video post-processing module registered")
3745 up(&w9968cf_vppmod_lock);
3746 return 0;
3747}
3748
3749
3750int w9968cf_vppmod_deregister(struct w9968cf_vpp_t* vpp)
3751{
3752 down(&w9968cf_vppmod_lock);
3753
3754 if (!w9968cf_vpp) {
3755 up(&w9968cf_vppmod_lock);
3756 return -EINVAL;
3757 }
3758
3759 if (w9968cf_vpp != vpp) {
3760 KDBG(1, "Only the owner can unregister the video "
3761 "post-processing module")
3762 up(&w9968cf_vppmod_lock);
3763 return -EINVAL;
3764 }
3765
3766 if (w9968cf_vpp->busy) {
3767 KDBG(2, "Video post-processing module busy. Wait for it to be "
3768 "released...")
3769 up(&w9968cf_vppmod_lock);
3770 wait_event(w9968cf_vppmod_wait, !w9968cf_vpp->busy);
3771 w9968cf_vpp = NULL;
3772 goto out;
3773 }
3774
3775 w9968cf_vpp = NULL;
3776
3777 up(&w9968cf_vppmod_lock);
3778
3779out:
3780 KDBG(2, "Video post-processing module unregistered")
3781 return 0;
3782}
3783
3784
3785static int __init w9968cf_module_init(void)
3786{
3787 int err;
3788
3789 KDBG(2, W9968CF_MODULE_NAME" "W9968CF_MODULE_VERSION)
3790 KDBG(3, W9968CF_MODULE_AUTHOR)
3791
3792 if (ovmod_load)
3793 request_module("ovcamchip");
3794
3795 if ((err = usb_register(&w9968cf_usb_driver)))
3796 return err;
3797
3798 return 0;
3799}
3800
3801
3802static void __exit w9968cf_module_exit(void)
3803{
3804 /* w9968cf_usb_disconnect() will be called */
3805 usb_deregister(&w9968cf_usb_driver);
3806
3807 KDBG(2, W9968CF_MODULE_NAME" deregistered")
3808}
3809
3810
3811module_init(w9968cf_module_init);
3812module_exit(w9968cf_module_exit);
3813
3814
3815EXPORT_SYMBOL(w9968cf_vppmod_register);
3816EXPORT_SYMBOL(w9968cf_vppmod_deregister);
Linux 6.x block layer and io_uring tree(s)