Commit | Line | Data |
---|---|---|
66d4eadd SS |
1 | /* |
2 | * xHCI host controller driver | |
3 | * | |
4 | * Copyright (C) 2008 Intel Corp. | |
5 | * | |
6 | * Author: Sarah Sharp | |
7 | * Some code borrowed from the Linux EHCI driver. | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License version 2 as | |
11 | * published by the Free Software Foundation. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, but | |
14 | * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
15 | * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
16 | * for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software Foundation, | |
20 | * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
21 | */ | |
22 | ||
43b86af8 | 23 | #include <linux/pci.h> |
66d4eadd | 24 | #include <linux/irq.h> |
8df75f42 | 25 | #include <linux/log2.h> |
66d4eadd | 26 | #include <linux/module.h> |
b0567b3f | 27 | #include <linux/moduleparam.h> |
5a0e3ad6 | 28 | #include <linux/slab.h> |
71c731a2 | 29 | #include <linux/dmi.h> |
008eb957 | 30 | #include <linux/dma-mapping.h> |
66d4eadd SS |
31 | |
32 | #include "xhci.h" | |
84a99f6f | 33 | #include "xhci-trace.h" |
66d4eadd SS |
34 | |
35 | #define DRIVER_AUTHOR "Sarah Sharp" | |
36 | #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" | |
37 | ||
b0567b3f SS |
38 | /* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */ |
39 | static int link_quirk; | |
40 | module_param(link_quirk, int, S_IRUGO | S_IWUSR); | |
41 | MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); | |
42 | ||
4e6a1ee7 TI |
43 | static unsigned int quirks; |
44 | module_param(quirks, uint, S_IRUGO); | |
45 | MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default"); | |
46 | ||
66d4eadd SS |
47 | /* TODO: copied from ehci-hcd.c - can this be refactored? */ |
48 | /* | |
2611bd18 | 49 | * xhci_handshake - spin reading hc until handshake completes or fails |
66d4eadd SS |
50 | * @ptr: address of hc register to be read |
51 | * @mask: bits to look at in result of read | |
52 | * @done: value of those bits when handshake succeeds | |
53 | * @usec: timeout in microseconds | |
54 | * | |
55 | * Returns negative errno, or zero on success | |
56 | * | |
57 | * Success happens when the "mask" bits have the specified value (hardware | |
58 | * handshake done). There are two failure modes: "usec" have passed (major | |
59 | * hardware flakeout), or the register reads as all-ones (hardware removed). | |
60 | */ | |
2611bd18 | 61 | int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr, |
66d4eadd SS |
62 | u32 mask, u32 done, int usec) |
63 | { | |
64 | u32 result; | |
65 | ||
66 | do { | |
b0ba9720 | 67 | result = readl(ptr); |
66d4eadd SS |
68 | if (result == ~(u32)0) /* card removed */ |
69 | return -ENODEV; | |
70 | result &= mask; | |
71 | if (result == done) | |
72 | return 0; | |
73 | udelay(1); | |
74 | usec--; | |
75 | } while (usec > 0); | |
76 | return -ETIMEDOUT; | |
77 | } | |
78 | ||
79 | /* | |
4f0f0bae | 80 | * Disable interrupts and begin the xHCI halting process. |
66d4eadd | 81 | */ |
4f0f0bae | 82 | void xhci_quiesce(struct xhci_hcd *xhci) |
66d4eadd SS |
83 | { |
84 | u32 halted; | |
85 | u32 cmd; | |
86 | u32 mask; | |
87 | ||
66d4eadd | 88 | mask = ~(XHCI_IRQS); |
b0ba9720 | 89 | halted = readl(&xhci->op_regs->status) & STS_HALT; |
66d4eadd SS |
90 | if (!halted) |
91 | mask &= ~CMD_RUN; | |
92 | ||
b0ba9720 | 93 | cmd = readl(&xhci->op_regs->command); |
66d4eadd | 94 | cmd &= mask; |
204b7793 | 95 | writel(cmd, &xhci->op_regs->command); |
4f0f0bae SS |
96 | } |
97 | ||
98 | /* | |
99 | * Force HC into halt state. | |
100 | * | |
101 | * Disable any IRQs and clear the run/stop bit. | |
102 | * HC will complete any current and actively pipelined transactions, and | |
bdfca502 | 103 | * should halt within 16 ms of the run/stop bit being cleared. |
4f0f0bae | 104 | * Read HC Halted bit in the status register to see when the HC is finished. |
4f0f0bae SS |
105 | */ |
106 | int xhci_halt(struct xhci_hcd *xhci) | |
107 | { | |
c6cc27c7 | 108 | int ret; |
d195fcff | 109 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Halt the HC"); |
4f0f0bae | 110 | xhci_quiesce(xhci); |
66d4eadd | 111 | |
2611bd18 | 112 | ret = xhci_handshake(xhci, &xhci->op_regs->status, |
66d4eadd | 113 | STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); |
c181bc5b | 114 | if (!ret) { |
c6cc27c7 | 115 | xhci->xhc_state |= XHCI_STATE_HALTED; |
c181bc5b EF |
116 | xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; |
117 | } else | |
5af98bb0 SS |
118 | xhci_warn(xhci, "Host not halted after %u microseconds.\n", |
119 | XHCI_MAX_HALT_USEC); | |
c6cc27c7 | 120 | return ret; |
66d4eadd SS |
121 | } |
122 | ||
ed07453f SS |
123 | /* |
124 | * Set the run bit and wait for the host to be running. | |
125 | */ | |
8212a49d | 126 | static int xhci_start(struct xhci_hcd *xhci) |
ed07453f SS |
127 | { |
128 | u32 temp; | |
129 | int ret; | |
130 | ||
b0ba9720 | 131 | temp = readl(&xhci->op_regs->command); |
ed07453f | 132 | temp |= (CMD_RUN); |
d195fcff | 133 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Turn on HC, cmd = 0x%x.", |
ed07453f | 134 | temp); |
204b7793 | 135 | writel(temp, &xhci->op_regs->command); |
ed07453f SS |
136 | |
137 | /* | |
138 | * Wait for the HCHalted Status bit to be 0 to indicate the host is | |
139 | * running. | |
140 | */ | |
2611bd18 | 141 | ret = xhci_handshake(xhci, &xhci->op_regs->status, |
ed07453f SS |
142 | STS_HALT, 0, XHCI_MAX_HALT_USEC); |
143 | if (ret == -ETIMEDOUT) | |
144 | xhci_err(xhci, "Host took too long to start, " | |
145 | "waited %u microseconds.\n", | |
146 | XHCI_MAX_HALT_USEC); | |
c6cc27c7 SS |
147 | if (!ret) |
148 | xhci->xhc_state &= ~XHCI_STATE_HALTED; | |
ed07453f SS |
149 | return ret; |
150 | } | |
151 | ||
66d4eadd | 152 | /* |
ac04e6ff | 153 | * Reset a halted HC. |
66d4eadd SS |
154 | * |
155 | * This resets pipelines, timers, counters, state machines, etc. | |
156 | * Transactions will be terminated immediately, and operational registers | |
157 | * will be set to their defaults. | |
158 | */ | |
159 | int xhci_reset(struct xhci_hcd *xhci) | |
160 | { | |
161 | u32 command; | |
162 | u32 state; | |
f370b996 | 163 | int ret, i; |
66d4eadd | 164 | |
b0ba9720 | 165 | state = readl(&xhci->op_regs->status); |
d3512f63 SS |
166 | if ((state & STS_HALT) == 0) { |
167 | xhci_warn(xhci, "Host controller not halted, aborting reset.\n"); | |
168 | return 0; | |
169 | } | |
66d4eadd | 170 | |
d195fcff | 171 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Reset the HC"); |
b0ba9720 | 172 | command = readl(&xhci->op_regs->command); |
66d4eadd | 173 | command |= CMD_RESET; |
204b7793 | 174 | writel(command, &xhci->op_regs->command); |
66d4eadd | 175 | |
2611bd18 | 176 | ret = xhci_handshake(xhci, &xhci->op_regs->command, |
22ceac19 | 177 | CMD_RESET, 0, 10 * 1000 * 1000); |
2d62f3ee SS |
178 | if (ret) |
179 | return ret; | |
180 | ||
d195fcff XR |
181 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
182 | "Wait for controller to be ready for doorbell rings"); | |
2d62f3ee SS |
183 | /* |
184 | * xHCI cannot write to any doorbells or operational registers other | |
185 | * than status until the "Controller Not Ready" flag is cleared. | |
186 | */ | |
2611bd18 | 187 | ret = xhci_handshake(xhci, &xhci->op_regs->status, |
22ceac19 | 188 | STS_CNR, 0, 10 * 1000 * 1000); |
f370b996 AX |
189 | |
190 | for (i = 0; i < 2; ++i) { | |
191 | xhci->bus_state[i].port_c_suspend = 0; | |
192 | xhci->bus_state[i].suspended_ports = 0; | |
193 | xhci->bus_state[i].resuming_ports = 0; | |
194 | } | |
195 | ||
196 | return ret; | |
66d4eadd SS |
197 | } |
198 | ||
421aa841 SAS |
199 | #ifdef CONFIG_PCI |
200 | static int xhci_free_msi(struct xhci_hcd *xhci) | |
43b86af8 DN |
201 | { |
202 | int i; | |
43b86af8 | 203 | |
421aa841 SAS |
204 | if (!xhci->msix_entries) |
205 | return -EINVAL; | |
43b86af8 | 206 | |
421aa841 SAS |
207 | for (i = 0; i < xhci->msix_count; i++) |
208 | if (xhci->msix_entries[i].vector) | |
209 | free_irq(xhci->msix_entries[i].vector, | |
210 | xhci_to_hcd(xhci)); | |
211 | return 0; | |
43b86af8 DN |
212 | } |
213 | ||
214 | /* | |
215 | * Set up MSI | |
216 | */ | |
217 | static int xhci_setup_msi(struct xhci_hcd *xhci) | |
66d4eadd SS |
218 | { |
219 | int ret; | |
43b86af8 DN |
220 | struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); |
221 | ||
222 | ret = pci_enable_msi(pdev); | |
223 | if (ret) { | |
d195fcff XR |
224 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
225 | "failed to allocate MSI entry"); | |
43b86af8 DN |
226 | return ret; |
227 | } | |
228 | ||
851ec164 | 229 | ret = request_irq(pdev->irq, xhci_msi_irq, |
43b86af8 DN |
230 | 0, "xhci_hcd", xhci_to_hcd(xhci)); |
231 | if (ret) { | |
d195fcff XR |
232 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
233 | "disable MSI interrupt"); | |
43b86af8 DN |
234 | pci_disable_msi(pdev); |
235 | } | |
236 | ||
237 | return ret; | |
238 | } | |
239 | ||
421aa841 SAS |
240 | /* |
241 | * Free IRQs | |
242 | * free all IRQs request | |
243 | */ | |
244 | static void xhci_free_irq(struct xhci_hcd *xhci) | |
245 | { | |
246 | struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); | |
247 | int ret; | |
248 | ||
249 | /* return if using legacy interrupt */ | |
cd70469d | 250 | if (xhci_to_hcd(xhci)->irq > 0) |
421aa841 SAS |
251 | return; |
252 | ||
253 | ret = xhci_free_msi(xhci); | |
254 | if (!ret) | |
255 | return; | |
cd70469d | 256 | if (pdev->irq > 0) |
421aa841 SAS |
257 | free_irq(pdev->irq, xhci_to_hcd(xhci)); |
258 | ||
259 | return; | |
260 | } | |
261 | ||
43b86af8 DN |
262 | /* |
263 | * Set up MSI-X | |
264 | */ | |
265 | static int xhci_setup_msix(struct xhci_hcd *xhci) | |
266 | { | |
267 | int i, ret = 0; | |
0029227f AX |
268 | struct usb_hcd *hcd = xhci_to_hcd(xhci); |
269 | struct pci_dev *pdev = to_pci_dev(hcd->self.controller); | |
66d4eadd | 270 | |
43b86af8 DN |
271 | /* |
272 | * calculate number of msi-x vectors supported. | |
273 | * - HCS_MAX_INTRS: the max number of interrupts the host can handle, | |
274 | * with max number of interrupters based on the xhci HCSPARAMS1. | |
275 | * - num_online_cpus: maximum msi-x vectors per CPUs core. | |
276 | * Add additional 1 vector to ensure always available interrupt. | |
277 | */ | |
278 | xhci->msix_count = min(num_online_cpus() + 1, | |
279 | HCS_MAX_INTRS(xhci->hcs_params1)); | |
280 | ||
281 | xhci->msix_entries = | |
282 | kmalloc((sizeof(struct msix_entry))*xhci->msix_count, | |
86871975 | 283 | GFP_KERNEL); |
66d4eadd SS |
284 | if (!xhci->msix_entries) { |
285 | xhci_err(xhci, "Failed to allocate MSI-X entries\n"); | |
286 | return -ENOMEM; | |
287 | } | |
43b86af8 DN |
288 | |
289 | for (i = 0; i < xhci->msix_count; i++) { | |
290 | xhci->msix_entries[i].entry = i; | |
291 | xhci->msix_entries[i].vector = 0; | |
292 | } | |
66d4eadd | 293 | |
a62445ae | 294 | ret = pci_enable_msix_exact(pdev, xhci->msix_entries, xhci->msix_count); |
66d4eadd | 295 | if (ret) { |
d195fcff XR |
296 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
297 | "Failed to enable MSI-X"); | |
66d4eadd SS |
298 | goto free_entries; |
299 | } | |
300 | ||
43b86af8 DN |
301 | for (i = 0; i < xhci->msix_count; i++) { |
302 | ret = request_irq(xhci->msix_entries[i].vector, | |
851ec164 | 303 | xhci_msi_irq, |
43b86af8 DN |
304 | 0, "xhci_hcd", xhci_to_hcd(xhci)); |
305 | if (ret) | |
306 | goto disable_msix; | |
66d4eadd | 307 | } |
43b86af8 | 308 | |
0029227f | 309 | hcd->msix_enabled = 1; |
43b86af8 | 310 | return ret; |
66d4eadd SS |
311 | |
312 | disable_msix: | |
d195fcff | 313 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable MSI-X interrupt"); |
43b86af8 | 314 | xhci_free_irq(xhci); |
66d4eadd SS |
315 | pci_disable_msix(pdev); |
316 | free_entries: | |
317 | kfree(xhci->msix_entries); | |
318 | xhci->msix_entries = NULL; | |
319 | return ret; | |
320 | } | |
321 | ||
66d4eadd SS |
322 | /* Free any IRQs and disable MSI-X */ |
323 | static void xhci_cleanup_msix(struct xhci_hcd *xhci) | |
324 | { | |
0029227f AX |
325 | struct usb_hcd *hcd = xhci_to_hcd(xhci); |
326 | struct pci_dev *pdev = to_pci_dev(hcd->self.controller); | |
66d4eadd | 327 | |
9005355a JP |
328 | if (xhci->quirks & XHCI_PLAT) |
329 | return; | |
330 | ||
43b86af8 DN |
331 | xhci_free_irq(xhci); |
332 | ||
333 | if (xhci->msix_entries) { | |
334 | pci_disable_msix(pdev); | |
335 | kfree(xhci->msix_entries); | |
336 | xhci->msix_entries = NULL; | |
337 | } else { | |
338 | pci_disable_msi(pdev); | |
339 | } | |
340 | ||
0029227f | 341 | hcd->msix_enabled = 0; |
43b86af8 | 342 | return; |
66d4eadd | 343 | } |
66d4eadd | 344 | |
d5c82feb | 345 | static void __maybe_unused xhci_msix_sync_irqs(struct xhci_hcd *xhci) |
421aa841 SAS |
346 | { |
347 | int i; | |
348 | ||
349 | if (xhci->msix_entries) { | |
350 | for (i = 0; i < xhci->msix_count; i++) | |
351 | synchronize_irq(xhci->msix_entries[i].vector); | |
352 | } | |
353 | } | |
354 | ||
355 | static int xhci_try_enable_msi(struct usb_hcd *hcd) | |
356 | { | |
357 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
52fb6125 | 358 | struct pci_dev *pdev; |
421aa841 SAS |
359 | int ret; |
360 | ||
52fb6125 SS |
361 | /* The xhci platform device has set up IRQs through usb_add_hcd. */ |
362 | if (xhci->quirks & XHCI_PLAT) | |
363 | return 0; | |
364 | ||
365 | pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); | |
421aa841 SAS |
366 | /* |
367 | * Some Fresco Logic host controllers advertise MSI, but fail to | |
368 | * generate interrupts. Don't even try to enable MSI. | |
369 | */ | |
370 | if (xhci->quirks & XHCI_BROKEN_MSI) | |
00eed9c8 | 371 | goto legacy_irq; |
421aa841 SAS |
372 | |
373 | /* unregister the legacy interrupt */ | |
374 | if (hcd->irq) | |
375 | free_irq(hcd->irq, hcd); | |
cd70469d | 376 | hcd->irq = 0; |
421aa841 SAS |
377 | |
378 | ret = xhci_setup_msix(xhci); | |
379 | if (ret) | |
380 | /* fall back to msi*/ | |
381 | ret = xhci_setup_msi(xhci); | |
382 | ||
383 | if (!ret) | |
cd70469d | 384 | /* hcd->irq is 0, we have MSI */ |
421aa841 SAS |
385 | return 0; |
386 | ||
68d07f64 SS |
387 | if (!pdev->irq) { |
388 | xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n"); | |
389 | return -EINVAL; | |
390 | } | |
391 | ||
00eed9c8 | 392 | legacy_irq: |
79699437 AH |
393 | if (!strlen(hcd->irq_descr)) |
394 | snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", | |
395 | hcd->driver->description, hcd->self.busnum); | |
396 | ||
421aa841 SAS |
397 | /* fall back to legacy interrupt*/ |
398 | ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, | |
399 | hcd->irq_descr, hcd); | |
400 | if (ret) { | |
401 | xhci_err(xhci, "request interrupt %d failed\n", | |
402 | pdev->irq); | |
403 | return ret; | |
404 | } | |
405 | hcd->irq = pdev->irq; | |
406 | return 0; | |
407 | } | |
408 | ||
409 | #else | |
410 | ||
01bb59eb | 411 | static inline int xhci_try_enable_msi(struct usb_hcd *hcd) |
421aa841 SAS |
412 | { |
413 | return 0; | |
414 | } | |
415 | ||
01bb59eb | 416 | static inline void xhci_cleanup_msix(struct xhci_hcd *xhci) |
421aa841 SAS |
417 | { |
418 | } | |
419 | ||
01bb59eb | 420 | static inline void xhci_msix_sync_irqs(struct xhci_hcd *xhci) |
421aa841 SAS |
421 | { |
422 | } | |
423 | ||
424 | #endif | |
425 | ||
71c731a2 AC |
426 | static void compliance_mode_recovery(unsigned long arg) |
427 | { | |
428 | struct xhci_hcd *xhci; | |
429 | struct usb_hcd *hcd; | |
430 | u32 temp; | |
431 | int i; | |
432 | ||
433 | xhci = (struct xhci_hcd *)arg; | |
434 | ||
435 | for (i = 0; i < xhci->num_usb3_ports; i++) { | |
b0ba9720 | 436 | temp = readl(xhci->usb3_ports[i]); |
71c731a2 AC |
437 | if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) { |
438 | /* | |
439 | * Compliance Mode Detected. Letting USB Core | |
440 | * handle the Warm Reset | |
441 | */ | |
4bdfe4c3 XR |
442 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
443 | "Compliance mode detected->port %d", | |
71c731a2 | 444 | i + 1); |
4bdfe4c3 XR |
445 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
446 | "Attempting compliance mode recovery"); | |
71c731a2 AC |
447 | hcd = xhci->shared_hcd; |
448 | ||
449 | if (hcd->state == HC_STATE_SUSPENDED) | |
450 | usb_hcd_resume_root_hub(hcd); | |
451 | ||
452 | usb_hcd_poll_rh_status(hcd); | |
453 | } | |
454 | } | |
455 | ||
456 | if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1)) | |
457 | mod_timer(&xhci->comp_mode_recovery_timer, | |
458 | jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); | |
459 | } | |
460 | ||
461 | /* | |
462 | * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver | |
463 | * that causes ports behind that hardware to enter compliance mode sometimes. | |
464 | * The quirk creates a timer that polls every 2 seconds the link state of | |
465 | * each host controller's port and recovers it by issuing a Warm reset | |
466 | * if Compliance mode is detected, otherwise the port will become "dead" (no | |
467 | * device connections or disconnections will be detected anymore). Becasue no | |
468 | * status event is generated when entering compliance mode (per xhci spec), | |
469 | * this quirk is needed on systems that have the failing hardware installed. | |
470 | */ | |
471 | static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) | |
472 | { | |
473 | xhci->port_status_u0 = 0; | |
474 | init_timer(&xhci->comp_mode_recovery_timer); | |
475 | ||
476 | xhci->comp_mode_recovery_timer.data = (unsigned long) xhci; | |
477 | xhci->comp_mode_recovery_timer.function = compliance_mode_recovery; | |
478 | xhci->comp_mode_recovery_timer.expires = jiffies + | |
479 | msecs_to_jiffies(COMP_MODE_RCVRY_MSECS); | |
480 | ||
481 | set_timer_slack(&xhci->comp_mode_recovery_timer, | |
482 | msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); | |
483 | add_timer(&xhci->comp_mode_recovery_timer); | |
4bdfe4c3 XR |
484 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
485 | "Compliance mode recovery timer initialized"); | |
71c731a2 AC |
486 | } |
487 | ||
488 | /* | |
489 | * This function identifies the systems that have installed the SN65LVPE502CP | |
490 | * USB3.0 re-driver and that need the Compliance Mode Quirk. | |
491 | * Systems: | |
492 | * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820 | |
493 | */ | |
e1cd9727 | 494 | static bool xhci_compliance_mode_recovery_timer_quirk_check(void) |
71c731a2 AC |
495 | { |
496 | const char *dmi_product_name, *dmi_sys_vendor; | |
497 | ||
498 | dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); | |
499 | dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); | |
457a73d3 VG |
500 | if (!dmi_product_name || !dmi_sys_vendor) |
501 | return false; | |
71c731a2 AC |
502 | |
503 | if (!(strstr(dmi_sys_vendor, "Hewlett-Packard"))) | |
504 | return false; | |
505 | ||
506 | if (strstr(dmi_product_name, "Z420") || | |
507 | strstr(dmi_product_name, "Z620") || | |
47080974 | 508 | strstr(dmi_product_name, "Z820") || |
b0e4e606 | 509 | strstr(dmi_product_name, "Z1 Workstation")) |
71c731a2 AC |
510 | return true; |
511 | ||
512 | return false; | |
513 | } | |
514 | ||
515 | static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci) | |
516 | { | |
517 | return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1)); | |
518 | } | |
519 | ||
520 | ||
66d4eadd SS |
521 | /* |
522 | * Initialize memory for HCD and xHC (one-time init). | |
523 | * | |
524 | * Program the PAGESIZE register, initialize the device context array, create | |
525 | * device contexts (?), set up a command ring segment (or two?), create event | |
526 | * ring (one for now). | |
527 | */ | |
528 | int xhci_init(struct usb_hcd *hcd) | |
529 | { | |
530 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
531 | int retval = 0; | |
532 | ||
d195fcff | 533 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_init"); |
66d4eadd | 534 | spin_lock_init(&xhci->lock); |
d7826599 | 535 | if (xhci->hci_version == 0x95 && link_quirk) { |
4bdfe4c3 XR |
536 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
537 | "QUIRK: Not clearing Link TRB chain bits."); | |
b0567b3f SS |
538 | xhci->quirks |= XHCI_LINK_TRB_QUIRK; |
539 | } else { | |
d195fcff XR |
540 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
541 | "xHCI doesn't need link TRB QUIRK"); | |
b0567b3f | 542 | } |
66d4eadd | 543 | retval = xhci_mem_init(xhci, GFP_KERNEL); |
d195fcff | 544 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init"); |
66d4eadd | 545 | |
71c731a2 | 546 | /* Initializing Compliance Mode Recovery Data If Needed */ |
c3897aa5 | 547 | if (xhci_compliance_mode_recovery_timer_quirk_check()) { |
71c731a2 AC |
548 | xhci->quirks |= XHCI_COMP_MODE_QUIRK; |
549 | compliance_mode_recovery_timer_init(xhci); | |
550 | } | |
551 | ||
66d4eadd SS |
552 | return retval; |
553 | } | |
554 | ||
7f84eef0 SS |
555 | /*-------------------------------------------------------------------------*/ |
556 | ||
7f84eef0 | 557 | |
f6ff0ac8 SS |
558 | static int xhci_run_finished(struct xhci_hcd *xhci) |
559 | { | |
560 | if (xhci_start(xhci)) { | |
561 | xhci_halt(xhci); | |
562 | return -ENODEV; | |
563 | } | |
564 | xhci->shared_hcd->state = HC_STATE_RUNNING; | |
c181bc5b | 565 | xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; |
f6ff0ac8 SS |
566 | |
567 | if (xhci->quirks & XHCI_NEC_HOST) | |
568 | xhci_ring_cmd_db(xhci); | |
569 | ||
d195fcff XR |
570 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
571 | "Finished xhci_run for USB3 roothub"); | |
f6ff0ac8 SS |
572 | return 0; |
573 | } | |
574 | ||
66d4eadd SS |
575 | /* |
576 | * Start the HC after it was halted. | |
577 | * | |
578 | * This function is called by the USB core when the HC driver is added. | |
579 | * Its opposite is xhci_stop(). | |
580 | * | |
581 | * xhci_init() must be called once before this function can be called. | |
582 | * Reset the HC, enable device slot contexts, program DCBAAP, and | |
583 | * set command ring pointer and event ring pointer. | |
584 | * | |
585 | * Setup MSI-X vectors and enable interrupts. | |
586 | */ | |
587 | int xhci_run(struct usb_hcd *hcd) | |
588 | { | |
589 | u32 temp; | |
8e595a5d | 590 | u64 temp_64; |
3fd1ec58 | 591 | int ret; |
66d4eadd | 592 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
66d4eadd | 593 | |
f6ff0ac8 SS |
594 | /* Start the xHCI host controller running only after the USB 2.0 roothub |
595 | * is setup. | |
596 | */ | |
66d4eadd | 597 | |
0f2a7930 | 598 | hcd->uses_new_polling = 1; |
f6ff0ac8 SS |
599 | if (!usb_hcd_is_primary_hcd(hcd)) |
600 | return xhci_run_finished(xhci); | |
0f2a7930 | 601 | |
d195fcff | 602 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_run"); |
43b86af8 | 603 | |
3fd1ec58 | 604 | ret = xhci_try_enable_msi(hcd); |
43b86af8 | 605 | if (ret) |
3fd1ec58 | 606 | return ret; |
66d4eadd | 607 | |
66e49d87 SS |
608 | xhci_dbg(xhci, "Command ring memory map follows:\n"); |
609 | xhci_debug_ring(xhci, xhci->cmd_ring); | |
610 | xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); | |
611 | xhci_dbg_cmd_ptrs(xhci); | |
612 | ||
613 | xhci_dbg(xhci, "ERST memory map follows:\n"); | |
614 | xhci_dbg_erst(xhci, &xhci->erst); | |
615 | xhci_dbg(xhci, "Event ring:\n"); | |
616 | xhci_debug_ring(xhci, xhci->event_ring); | |
617 | xhci_dbg_ring_ptrs(xhci, xhci->event_ring); | |
f7b2e403 | 618 | temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); |
66e49d87 | 619 | temp_64 &= ~ERST_PTR_MASK; |
d195fcff XR |
620 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
621 | "ERST deq = 64'h%0lx", (long unsigned int) temp_64); | |
66e49d87 | 622 | |
d195fcff XR |
623 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
624 | "// Set the interrupt modulation register"); | |
b0ba9720 | 625 | temp = readl(&xhci->ir_set->irq_control); |
a4d88302 | 626 | temp &= ~ER_IRQ_INTERVAL_MASK; |
66d4eadd | 627 | temp |= (u32) 160; |
204b7793 | 628 | writel(temp, &xhci->ir_set->irq_control); |
66d4eadd SS |
629 | |
630 | /* Set the HCD state before we enable the irqs */ | |
b0ba9720 | 631 | temp = readl(&xhci->op_regs->command); |
66d4eadd | 632 | temp |= (CMD_EIE); |
d195fcff XR |
633 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
634 | "// Enable interrupts, cmd = 0x%x.", temp); | |
204b7793 | 635 | writel(temp, &xhci->op_regs->command); |
66d4eadd | 636 | |
b0ba9720 | 637 | temp = readl(&xhci->ir_set->irq_pending); |
d195fcff XR |
638 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
639 | "// Enabling event ring interrupter %p by writing 0x%x to irq_pending", | |
700e2052 | 640 | xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp)); |
204b7793 | 641 | writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending); |
09ece30e | 642 | xhci_print_ir_set(xhci, 0); |
66d4eadd | 643 | |
ddba5cd0 MN |
644 | if (xhci->quirks & XHCI_NEC_HOST) { |
645 | struct xhci_command *command; | |
646 | command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); | |
647 | if (!command) | |
648 | return -ENOMEM; | |
649 | xhci_queue_vendor_command(xhci, command, 0, 0, 0, | |
0238634d | 650 | TRB_TYPE(TRB_NEC_GET_FW)); |
ddba5cd0 | 651 | } |
d195fcff XR |
652 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
653 | "Finished xhci_run for USB2 roothub"); | |
f6ff0ac8 SS |
654 | return 0; |
655 | } | |
436e8c7d | 656 | EXPORT_SYMBOL_GPL(xhci_run); |
ed07453f | 657 | |
f6ff0ac8 SS |
658 | static void xhci_only_stop_hcd(struct usb_hcd *hcd) |
659 | { | |
660 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
66d4eadd | 661 | |
f6ff0ac8 SS |
662 | spin_lock_irq(&xhci->lock); |
663 | xhci_halt(xhci); | |
664 | ||
665 | /* The shared_hcd is going to be deallocated shortly (the USB core only | |
666 | * calls this function when allocation fails in usb_add_hcd(), or | |
667 | * usb_remove_hcd() is called). So we need to unset xHCI's pointer. | |
668 | */ | |
669 | xhci->shared_hcd = NULL; | |
670 | spin_unlock_irq(&xhci->lock); | |
66d4eadd SS |
671 | } |
672 | ||
673 | /* | |
674 | * Stop xHCI driver. | |
675 | * | |
676 | * This function is called by the USB core when the HC driver is removed. | |
677 | * Its opposite is xhci_run(). | |
678 | * | |
679 | * Disable device contexts, disable IRQs, and quiesce the HC. | |
680 | * Reset the HC, finish any completed transactions, and cleanup memory. | |
681 | */ | |
682 | void xhci_stop(struct usb_hcd *hcd) | |
683 | { | |
684 | u32 temp; | |
685 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
686 | ||
f6ff0ac8 SS |
687 | if (!usb_hcd_is_primary_hcd(hcd)) { |
688 | xhci_only_stop_hcd(xhci->shared_hcd); | |
689 | return; | |
690 | } | |
691 | ||
66d4eadd | 692 | spin_lock_irq(&xhci->lock); |
f6ff0ac8 SS |
693 | /* Make sure the xHC is halted for a USB3 roothub |
694 | * (xhci_stop() could be called as part of failed init). | |
695 | */ | |
66d4eadd SS |
696 | xhci_halt(xhci); |
697 | xhci_reset(xhci); | |
698 | spin_unlock_irq(&xhci->lock); | |
699 | ||
40a9fb17 ZR |
700 | xhci_cleanup_msix(xhci); |
701 | ||
71c731a2 AC |
702 | /* Deleting Compliance Mode Recovery Timer */ |
703 | if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && | |
58b1d799 | 704 | (!(xhci_all_ports_seen_u0(xhci)))) { |
71c731a2 | 705 | del_timer_sync(&xhci->comp_mode_recovery_timer); |
4bdfe4c3 XR |
706 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
707 | "%s: compliance mode recovery timer deleted", | |
58b1d799 TC |
708 | __func__); |
709 | } | |
71c731a2 | 710 | |
c41136b0 AX |
711 | if (xhci->quirks & XHCI_AMD_PLL_FIX) |
712 | usb_amd_dev_put(); | |
713 | ||
d195fcff XR |
714 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
715 | "// Disabling event ring interrupts"); | |
b0ba9720 | 716 | temp = readl(&xhci->op_regs->status); |
204b7793 | 717 | writel(temp & ~STS_EINT, &xhci->op_regs->status); |
b0ba9720 | 718 | temp = readl(&xhci->ir_set->irq_pending); |
204b7793 | 719 | writel(ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); |
09ece30e | 720 | xhci_print_ir_set(xhci, 0); |
66d4eadd | 721 | |
d195fcff | 722 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, "cleaning up memory"); |
66d4eadd | 723 | xhci_mem_cleanup(xhci); |
d195fcff XR |
724 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
725 | "xhci_stop completed - status = %x", | |
b0ba9720 | 726 | readl(&xhci->op_regs->status)); |
66d4eadd SS |
727 | } |
728 | ||
729 | /* | |
730 | * Shutdown HC (not bus-specific) | |
731 | * | |
732 | * This is called when the machine is rebooting or halting. We assume that the | |
733 | * machine will be powered off, and the HC's internal state will be reset. | |
734 | * Don't bother to free memory. | |
f6ff0ac8 SS |
735 | * |
736 | * This will only ever be called with the main usb_hcd (the USB3 roothub). | |
66d4eadd SS |
737 | */ |
738 | void xhci_shutdown(struct usb_hcd *hcd) | |
739 | { | |
740 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
741 | ||
052c7f9f | 742 | if (xhci->quirks & XHCI_SPURIOUS_REBOOT) |
e95829f4 SS |
743 | usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); |
744 | ||
66d4eadd SS |
745 | spin_lock_irq(&xhci->lock); |
746 | xhci_halt(xhci); | |
638298dc TI |
747 | /* Workaround for spurious wakeups at shutdown with HSW */ |
748 | if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) | |
749 | xhci_reset(xhci); | |
43b86af8 | 750 | spin_unlock_irq(&xhci->lock); |
66d4eadd | 751 | |
40a9fb17 ZR |
752 | xhci_cleanup_msix(xhci); |
753 | ||
d195fcff XR |
754 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
755 | "xhci_shutdown completed - status = %x", | |
b0ba9720 | 756 | readl(&xhci->op_regs->status)); |
638298dc TI |
757 | |
758 | /* Yet another workaround for spurious wakeups at shutdown with HSW */ | |
759 | if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) | |
760 | pci_set_power_state(to_pci_dev(hcd->self.controller), PCI_D3hot); | |
66d4eadd SS |
761 | } |
762 | ||
b5b5c3ac | 763 | #ifdef CONFIG_PM |
5535b1d5 AX |
764 | static void xhci_save_registers(struct xhci_hcd *xhci) |
765 | { | |
b0ba9720 XR |
766 | xhci->s3.command = readl(&xhci->op_regs->command); |
767 | xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification); | |
f7b2e403 | 768 | xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); |
b0ba9720 XR |
769 | xhci->s3.config_reg = readl(&xhci->op_regs->config_reg); |
770 | xhci->s3.erst_size = readl(&xhci->ir_set->erst_size); | |
f7b2e403 SS |
771 | xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base); |
772 | xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); | |
b0ba9720 XR |
773 | xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending); |
774 | xhci->s3.irq_control = readl(&xhci->ir_set->irq_control); | |
5535b1d5 AX |
775 | } |
776 | ||
777 | static void xhci_restore_registers(struct xhci_hcd *xhci) | |
778 | { | |
204b7793 XR |
779 | writel(xhci->s3.command, &xhci->op_regs->command); |
780 | writel(xhci->s3.dev_nt, &xhci->op_regs->dev_notification); | |
477632df | 781 | xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); |
204b7793 XR |
782 | writel(xhci->s3.config_reg, &xhci->op_regs->config_reg); |
783 | writel(xhci->s3.erst_size, &xhci->ir_set->erst_size); | |
477632df SS |
784 | xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); |
785 | xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue); | |
204b7793 XR |
786 | writel(xhci->s3.irq_pending, &xhci->ir_set->irq_pending); |
787 | writel(xhci->s3.irq_control, &xhci->ir_set->irq_control); | |
5535b1d5 AX |
788 | } |
789 | ||
89821320 SS |
790 | static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) |
791 | { | |
792 | u64 val_64; | |
793 | ||
794 | /* step 2: initialize command ring buffer */ | |
f7b2e403 | 795 | val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); |
89821320 SS |
796 | val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | |
797 | (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, | |
798 | xhci->cmd_ring->dequeue) & | |
799 | (u64) ~CMD_RING_RSVD_BITS) | | |
800 | xhci->cmd_ring->cycle_state; | |
d195fcff XR |
801 | xhci_dbg_trace(xhci, trace_xhci_dbg_init, |
802 | "// Setting command ring address to 0x%llx", | |
89821320 | 803 | (long unsigned long) val_64); |
477632df | 804 | xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); |
89821320 SS |
805 | } |
806 | ||
807 | /* | |
808 | * The whole command ring must be cleared to zero when we suspend the host. | |
809 | * | |
810 | * The host doesn't save the command ring pointer in the suspend well, so we | |
811 | * need to re-program it on resume. Unfortunately, the pointer must be 64-byte | |
812 | * aligned, because of the reserved bits in the command ring dequeue pointer | |
813 | * register. Therefore, we can't just set the dequeue pointer back in the | |
814 | * middle of the ring (TRBs are 16-byte aligned). | |
815 | */ | |
816 | static void xhci_clear_command_ring(struct xhci_hcd *xhci) | |
817 | { | |
818 | struct xhci_ring *ring; | |
819 | struct xhci_segment *seg; | |
820 | ||
821 | ring = xhci->cmd_ring; | |
822 | seg = ring->deq_seg; | |
823 | do { | |
158886cd AX |
824 | memset(seg->trbs, 0, |
825 | sizeof(union xhci_trb) * (TRBS_PER_SEGMENT - 1)); | |
826 | seg->trbs[TRBS_PER_SEGMENT - 1].link.control &= | |
827 | cpu_to_le32(~TRB_CYCLE); | |
89821320 SS |
828 | seg = seg->next; |
829 | } while (seg != ring->deq_seg); | |
830 | ||
831 | /* Reset the software enqueue and dequeue pointers */ | |
832 | ring->deq_seg = ring->first_seg; | |
833 | ring->dequeue = ring->first_seg->trbs; | |
834 | ring->enq_seg = ring->deq_seg; | |
835 | ring->enqueue = ring->dequeue; | |
836 | ||
b008df60 | 837 | ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1; |
89821320 SS |
838 | /* |
839 | * Ring is now zeroed, so the HW should look for change of ownership | |
840 | * when the cycle bit is set to 1. | |
841 | */ | |
842 | ring->cycle_state = 1; | |
843 | ||
844 | /* | |
845 | * Reset the hardware dequeue pointer. | |
846 | * Yes, this will need to be re-written after resume, but we're paranoid | |
847 | * and want to make sure the hardware doesn't access bogus memory | |
848 | * because, say, the BIOS or an SMI started the host without changing | |
849 | * the command ring pointers. | |
850 | */ | |
851 | xhci_set_cmd_ring_deq(xhci); | |
852 | } | |
853 | ||
5535b1d5 AX |
854 | /* |
855 | * Stop HC (not bus-specific) | |
856 | * | |
857 | * This is called when the machine transition into S3/S4 mode. | |
858 | * | |
859 | */ | |
860 | int xhci_suspend(struct xhci_hcd *xhci) | |
861 | { | |
862 | int rc = 0; | |
455f5892 | 863 | unsigned int delay = XHCI_MAX_HALT_USEC; |
5535b1d5 AX |
864 | struct usb_hcd *hcd = xhci_to_hcd(xhci); |
865 | u32 command; | |
866 | ||
77b84767 FB |
867 | if (hcd->state != HC_STATE_SUSPENDED || |
868 | xhci->shared_hcd->state != HC_STATE_SUSPENDED) | |
869 | return -EINVAL; | |
870 | ||
c52804a4 SS |
871 | /* Don't poll the roothubs on bus suspend. */ |
872 | xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); | |
873 | clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); | |
874 | del_timer_sync(&hcd->rh_timer); | |
14e61a1b AC |
875 | clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); |
876 | del_timer_sync(&xhci->shared_hcd->rh_timer); | |
c52804a4 | 877 | |
5535b1d5 AX |
878 | spin_lock_irq(&xhci->lock); |
879 | clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); | |
b3209379 | 880 | clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); |
5535b1d5 AX |
881 | /* step 1: stop endpoint */ |
882 | /* skipped assuming that port suspend has done */ | |
883 | ||
884 | /* step 2: clear Run/Stop bit */ | |
b0ba9720 | 885 | command = readl(&xhci->op_regs->command); |
5535b1d5 | 886 | command &= ~CMD_RUN; |
204b7793 | 887 | writel(command, &xhci->op_regs->command); |
455f5892 ON |
888 | |
889 | /* Some chips from Fresco Logic need an extraordinary delay */ | |
890 | delay *= (xhci->quirks & XHCI_SLOW_SUSPEND) ? 10 : 1; | |
891 | ||
2611bd18 | 892 | if (xhci_handshake(xhci, &xhci->op_regs->status, |
455f5892 | 893 | STS_HALT, STS_HALT, delay)) { |
5535b1d5 AX |
894 | xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n"); |
895 | spin_unlock_irq(&xhci->lock); | |
896 | return -ETIMEDOUT; | |
897 | } | |
89821320 | 898 | xhci_clear_command_ring(xhci); |
5535b1d5 AX |
899 | |
900 | /* step 3: save registers */ | |
901 | xhci_save_registers(xhci); | |
902 | ||
903 | /* step 4: set CSS flag */ | |
b0ba9720 | 904 | command = readl(&xhci->op_regs->command); |
5535b1d5 | 905 | command |= CMD_CSS; |
204b7793 | 906 | writel(command, &xhci->op_regs->command); |
2611bd18 SS |
907 | if (xhci_handshake(xhci, &xhci->op_regs->status, |
908 | STS_SAVE, 0, 10 * 1000)) { | |
622eb783 | 909 | xhci_warn(xhci, "WARN: xHC save state timeout\n"); |
5535b1d5 AX |
910 | spin_unlock_irq(&xhci->lock); |
911 | return -ETIMEDOUT; | |
912 | } | |
5535b1d5 AX |
913 | spin_unlock_irq(&xhci->lock); |
914 | ||
71c731a2 AC |
915 | /* |
916 | * Deleting Compliance Mode Recovery Timer because the xHCI Host | |
917 | * is about to be suspended. | |
918 | */ | |
919 | if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && | |
920 | (!(xhci_all_ports_seen_u0(xhci)))) { | |
921 | del_timer_sync(&xhci->comp_mode_recovery_timer); | |
4bdfe4c3 XR |
922 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
923 | "%s: compliance mode recovery timer deleted", | |
58b1d799 | 924 | __func__); |
71c731a2 AC |
925 | } |
926 | ||
0029227f AX |
927 | /* step 5: remove core well power */ |
928 | /* synchronize irq when using MSI-X */ | |
421aa841 | 929 | xhci_msix_sync_irqs(xhci); |
0029227f | 930 | |
5535b1d5 AX |
931 | return rc; |
932 | } | |
436e8c7d | 933 | EXPORT_SYMBOL_GPL(xhci_suspend); |
5535b1d5 AX |
934 | |
935 | /* | |
936 | * start xHC (not bus-specific) | |
937 | * | |
938 | * This is called when the machine transition from S3/S4 mode. | |
939 | * | |
940 | */ | |
941 | int xhci_resume(struct xhci_hcd *xhci, bool hibernated) | |
942 | { | |
d6236f6d | 943 | u32 command, temp = 0, status; |
5535b1d5 | 944 | struct usb_hcd *hcd = xhci_to_hcd(xhci); |
65b22f93 | 945 | struct usb_hcd *secondary_hcd; |
f69e3120 | 946 | int retval = 0; |
77df9e0b | 947 | bool comp_timer_running = false; |
5535b1d5 | 948 | |
f6ff0ac8 | 949 | /* Wait a bit if either of the roothubs need to settle from the |
25985edc | 950 | * transition into bus suspend. |
20b67cf5 | 951 | */ |
f6ff0ac8 SS |
952 | if (time_before(jiffies, xhci->bus_state[0].next_statechange) || |
953 | time_before(jiffies, | |
954 | xhci->bus_state[1].next_statechange)) | |
5535b1d5 AX |
955 | msleep(100); |
956 | ||
f69e3120 AS |
957 | set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
958 | set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); | |
959 | ||
5535b1d5 | 960 | spin_lock_irq(&xhci->lock); |
c877b3b2 ML |
961 | if (xhci->quirks & XHCI_RESET_ON_RESUME) |
962 | hibernated = true; | |
5535b1d5 AX |
963 | |
964 | if (!hibernated) { | |
965 | /* step 1: restore register */ | |
966 | xhci_restore_registers(xhci); | |
967 | /* step 2: initialize command ring buffer */ | |
89821320 | 968 | xhci_set_cmd_ring_deq(xhci); |
5535b1d5 AX |
969 | /* step 3: restore state and start state*/ |
970 | /* step 3: set CRS flag */ | |
b0ba9720 | 971 | command = readl(&xhci->op_regs->command); |
5535b1d5 | 972 | command |= CMD_CRS; |
204b7793 | 973 | writel(command, &xhci->op_regs->command); |
2611bd18 | 974 | if (xhci_handshake(xhci, &xhci->op_regs->status, |
622eb783 AX |
975 | STS_RESTORE, 0, 10 * 1000)) { |
976 | xhci_warn(xhci, "WARN: xHC restore state timeout\n"); | |
5535b1d5 AX |
977 | spin_unlock_irq(&xhci->lock); |
978 | return -ETIMEDOUT; | |
979 | } | |
b0ba9720 | 980 | temp = readl(&xhci->op_regs->status); |
5535b1d5 AX |
981 | } |
982 | ||
983 | /* If restore operation fails, re-initialize the HC during resume */ | |
984 | if ((temp & STS_SRE) || hibernated) { | |
77df9e0b TC |
985 | |
986 | if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && | |
987 | !(xhci_all_ports_seen_u0(xhci))) { | |
988 | del_timer_sync(&xhci->comp_mode_recovery_timer); | |
4bdfe4c3 XR |
989 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
990 | "Compliance Mode Recovery Timer deleted!"); | |
77df9e0b TC |
991 | } |
992 | ||
fedd383e SS |
993 | /* Let the USB core know _both_ roothubs lost power. */ |
994 | usb_root_hub_lost_power(xhci->main_hcd->self.root_hub); | |
995 | usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub); | |
5535b1d5 AX |
996 | |
997 | xhci_dbg(xhci, "Stop HCD\n"); | |
998 | xhci_halt(xhci); | |
999 | xhci_reset(xhci); | |
5535b1d5 | 1000 | spin_unlock_irq(&xhci->lock); |
0029227f | 1001 | xhci_cleanup_msix(xhci); |
5535b1d5 | 1002 | |
5535b1d5 | 1003 | xhci_dbg(xhci, "// Disabling event ring interrupts\n"); |
b0ba9720 | 1004 | temp = readl(&xhci->op_regs->status); |
204b7793 | 1005 | writel(temp & ~STS_EINT, &xhci->op_regs->status); |
b0ba9720 | 1006 | temp = readl(&xhci->ir_set->irq_pending); |
204b7793 | 1007 | writel(ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); |
09ece30e | 1008 | xhci_print_ir_set(xhci, 0); |
5535b1d5 AX |
1009 | |
1010 | xhci_dbg(xhci, "cleaning up memory\n"); | |
1011 | xhci_mem_cleanup(xhci); | |
1012 | xhci_dbg(xhci, "xhci_stop completed - status = %x\n", | |
b0ba9720 | 1013 | readl(&xhci->op_regs->status)); |
5535b1d5 | 1014 | |
65b22f93 SS |
1015 | /* USB core calls the PCI reinit and start functions twice: |
1016 | * first with the primary HCD, and then with the secondary HCD. | |
1017 | * If we don't do the same, the host will never be started. | |
1018 | */ | |
1019 | if (!usb_hcd_is_primary_hcd(hcd)) | |
1020 | secondary_hcd = hcd; | |
1021 | else | |
1022 | secondary_hcd = xhci->shared_hcd; | |
1023 | ||
1024 | xhci_dbg(xhci, "Initialize the xhci_hcd\n"); | |
1025 | retval = xhci_init(hcd->primary_hcd); | |
5535b1d5 AX |
1026 | if (retval) |
1027 | return retval; | |
77df9e0b TC |
1028 | comp_timer_running = true; |
1029 | ||
65b22f93 SS |
1030 | xhci_dbg(xhci, "Start the primary HCD\n"); |
1031 | retval = xhci_run(hcd->primary_hcd); | |
b3209379 | 1032 | if (!retval) { |
f69e3120 AS |
1033 | xhci_dbg(xhci, "Start the secondary HCD\n"); |
1034 | retval = xhci_run(secondary_hcd); | |
b3209379 | 1035 | } |
5535b1d5 | 1036 | hcd->state = HC_STATE_SUSPENDED; |
b3209379 | 1037 | xhci->shared_hcd->state = HC_STATE_SUSPENDED; |
f69e3120 | 1038 | goto done; |
5535b1d5 AX |
1039 | } |
1040 | ||
5535b1d5 | 1041 | /* step 4: set Run/Stop bit */ |
b0ba9720 | 1042 | command = readl(&xhci->op_regs->command); |
5535b1d5 | 1043 | command |= CMD_RUN; |
204b7793 | 1044 | writel(command, &xhci->op_regs->command); |
2611bd18 | 1045 | xhci_handshake(xhci, &xhci->op_regs->status, STS_HALT, |
5535b1d5 AX |
1046 | 0, 250 * 1000); |
1047 | ||
1048 | /* step 5: walk topology and initialize portsc, | |
1049 | * portpmsc and portli | |
1050 | */ | |
1051 | /* this is done in bus_resume */ | |
1052 | ||
1053 | /* step 6: restart each of the previously | |
1054 | * Running endpoints by ringing their doorbells | |
1055 | */ | |
1056 | ||
5535b1d5 | 1057 | spin_unlock_irq(&xhci->lock); |
f69e3120 AS |
1058 | |
1059 | done: | |
1060 | if (retval == 0) { | |
d6236f6d WY |
1061 | /* Resume root hubs only when have pending events. */ |
1062 | status = readl(&xhci->op_regs->status); | |
1063 | if (status & STS_EINT) { | |
1064 | usb_hcd_resume_root_hub(hcd); | |
1065 | usb_hcd_resume_root_hub(xhci->shared_hcd); | |
1066 | } | |
f69e3120 | 1067 | } |
71c731a2 AC |
1068 | |
1069 | /* | |
1070 | * If system is subject to the Quirk, Compliance Mode Timer needs to | |
1071 | * be re-initialized Always after a system resume. Ports are subject | |
1072 | * to suffer the Compliance Mode issue again. It doesn't matter if | |
1073 | * ports have entered previously to U0 before system's suspension. | |
1074 | */ | |
77df9e0b | 1075 | if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running) |
71c731a2 AC |
1076 | compliance_mode_recovery_timer_init(xhci); |
1077 | ||
c52804a4 SS |
1078 | /* Re-enable port polling. */ |
1079 | xhci_dbg(xhci, "%s: starting port polling.\n", __func__); | |
1080 | set_bit(HCD_FLAG_POLL_RH, &hcd->flags); | |
1081 | usb_hcd_poll_rh_status(hcd); | |
14e61a1b AC |
1082 | set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); |
1083 | usb_hcd_poll_rh_status(xhci->shared_hcd); | |
c52804a4 | 1084 | |
f69e3120 | 1085 | return retval; |
5535b1d5 | 1086 | } |
436e8c7d | 1087 | EXPORT_SYMBOL_GPL(xhci_resume); |
b5b5c3ac SS |
1088 | #endif /* CONFIG_PM */ |
1089 | ||
7f84eef0 SS |
1090 | /*-------------------------------------------------------------------------*/ |
1091 | ||
d0e96f5a SS |
1092 | /** |
1093 | * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and | |
1094 | * HCDs. Find the index for an endpoint given its descriptor. Use the return | |
1095 | * value to right shift 1 for the bitmask. | |
1096 | * | |
1097 | * Index = (epnum * 2) + direction - 1, | |
1098 | * where direction = 0 for OUT, 1 for IN. | |
1099 | * For control endpoints, the IN index is used (OUT index is unused), so | |
1100 | * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2) | |
1101 | */ | |
1102 | unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc) | |
1103 | { | |
1104 | unsigned int index; | |
1105 | if (usb_endpoint_xfer_control(desc)) | |
1106 | index = (unsigned int) (usb_endpoint_num(desc)*2); | |
1107 | else | |
1108 | index = (unsigned int) (usb_endpoint_num(desc)*2) + | |
1109 | (usb_endpoint_dir_in(desc) ? 1 : 0) - 1; | |
1110 | return index; | |
1111 | } | |
1112 | ||
01c5f447 JW |
1113 | /* The reverse operation to xhci_get_endpoint_index. Calculate the USB endpoint |
1114 | * address from the XHCI endpoint index. | |
1115 | */ | |
1116 | unsigned int xhci_get_endpoint_address(unsigned int ep_index) | |
1117 | { | |
1118 | unsigned int number = DIV_ROUND_UP(ep_index, 2); | |
1119 | unsigned int direction = ep_index % 2 ? USB_DIR_OUT : USB_DIR_IN; | |
1120 | return direction | number; | |
1121 | } | |
1122 | ||
f94e0186 SS |
1123 | /* Find the flag for this endpoint (for use in the control context). Use the |
1124 | * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is | |
1125 | * bit 1, etc. | |
1126 | */ | |
1127 | unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc) | |
1128 | { | |
1129 | return 1 << (xhci_get_endpoint_index(desc) + 1); | |
1130 | } | |
1131 | ||
ac9d8fe7 SS |
1132 | /* Find the flag for this endpoint (for use in the control context). Use the |
1133 | * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is | |
1134 | * bit 1, etc. | |
1135 | */ | |
1136 | unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index) | |
1137 | { | |
1138 | return 1 << (ep_index + 1); | |
1139 | } | |
1140 | ||
f94e0186 SS |
1141 | /* Compute the last valid endpoint context index. Basically, this is the |
1142 | * endpoint index plus one. For slot contexts with more than valid endpoint, | |
1143 | * we find the most significant bit set in the added contexts flags. | |
1144 | * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000 | |
1145 | * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one. | |
1146 | */ | |
ac9d8fe7 | 1147 | unsigned int xhci_last_valid_endpoint(u32 added_ctxs) |
f94e0186 SS |
1148 | { |
1149 | return fls(added_ctxs) - 1; | |
1150 | } | |
1151 | ||
d0e96f5a SS |
1152 | /* Returns 1 if the arguments are OK; |
1153 | * returns 0 this is a root hub; returns -EINVAL for NULL pointers. | |
1154 | */ | |
8212a49d | 1155 | static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, |
64927730 AX |
1156 | struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev, |
1157 | const char *func) { | |
1158 | struct xhci_hcd *xhci; | |
1159 | struct xhci_virt_device *virt_dev; | |
1160 | ||
d0e96f5a | 1161 | if (!hcd || (check_ep && !ep) || !udev) { |
5c1127d3 | 1162 | pr_debug("xHCI %s called with invalid args\n", func); |
d0e96f5a SS |
1163 | return -EINVAL; |
1164 | } | |
1165 | if (!udev->parent) { | |
5c1127d3 | 1166 | pr_debug("xHCI %s called for root hub\n", func); |
d0e96f5a SS |
1167 | return 0; |
1168 | } | |
64927730 | 1169 | |
7bd89b40 | 1170 | xhci = hcd_to_xhci(hcd); |
64927730 | 1171 | if (check_virt_dev) { |
73ddc247 | 1172 | if (!udev->slot_id || !xhci->devs[udev->slot_id]) { |
5c1127d3 XR |
1173 | xhci_dbg(xhci, "xHCI %s called with unaddressed device\n", |
1174 | func); | |
64927730 AX |
1175 | return -EINVAL; |
1176 | } | |
1177 | ||
1178 | virt_dev = xhci->devs[udev->slot_id]; | |
1179 | if (virt_dev->udev != udev) { | |
5c1127d3 | 1180 | xhci_dbg(xhci, "xHCI %s called with udev and " |
64927730 AX |
1181 | "virt_dev does not match\n", func); |
1182 | return -EINVAL; | |
1183 | } | |
d0e96f5a | 1184 | } |
64927730 | 1185 | |
203a8661 SS |
1186 | if (xhci->xhc_state & XHCI_STATE_HALTED) |
1187 | return -ENODEV; | |
1188 | ||
d0e96f5a SS |
1189 | return 1; |
1190 | } | |
1191 | ||
2d3f1fac | 1192 | static int xhci_configure_endpoint(struct xhci_hcd *xhci, |
913a8a34 SS |
1193 | struct usb_device *udev, struct xhci_command *command, |
1194 | bool ctx_change, bool must_succeed); | |
2d3f1fac SS |
1195 | |
1196 | /* | |
1197 | * Full speed devices may have a max packet size greater than 8 bytes, but the | |
1198 | * USB core doesn't know that until it reads the first 8 bytes of the | |
1199 | * descriptor. If the usb_device's max packet size changes after that point, | |
1200 | * we need to issue an evaluate context command and wait on it. | |
1201 | */ | |
1202 | static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, | |
1203 | unsigned int ep_index, struct urb *urb) | |
1204 | { | |
2d3f1fac SS |
1205 | struct xhci_container_ctx *out_ctx; |
1206 | struct xhci_input_control_ctx *ctrl_ctx; | |
1207 | struct xhci_ep_ctx *ep_ctx; | |
ddba5cd0 | 1208 | struct xhci_command *command; |
2d3f1fac SS |
1209 | int max_packet_size; |
1210 | int hw_max_packet_size; | |
1211 | int ret = 0; | |
1212 | ||
1213 | out_ctx = xhci->devs[slot_id]->out_ctx; | |
1214 | ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); | |
28ccd296 | 1215 | hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); |
29cc8897 | 1216 | max_packet_size = usb_endpoint_maxp(&urb->dev->ep0.desc); |
2d3f1fac | 1217 | if (hw_max_packet_size != max_packet_size) { |
3a7fa5be XR |
1218 | xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, |
1219 | "Max Packet Size for ep 0 changed."); | |
1220 | xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, | |
1221 | "Max packet size in usb_device = %d", | |
2d3f1fac | 1222 | max_packet_size); |
3a7fa5be XR |
1223 | xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, |
1224 | "Max packet size in xHCI HW = %d", | |
2d3f1fac | 1225 | hw_max_packet_size); |
3a7fa5be XR |
1226 | xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, |
1227 | "Issuing evaluate context command."); | |
2d3f1fac | 1228 | |
92f8e767 SS |
1229 | /* Set up the input context flags for the command */ |
1230 | /* FIXME: This won't work if a non-default control endpoint | |
1231 | * changes max packet sizes. | |
1232 | */ | |
ddba5cd0 MN |
1233 | |
1234 | command = xhci_alloc_command(xhci, false, true, GFP_KERNEL); | |
1235 | if (!command) | |
1236 | return -ENOMEM; | |
1237 | ||
1238 | command->in_ctx = xhci->devs[slot_id]->in_ctx; | |
1239 | ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); | |
92f8e767 SS |
1240 | if (!ctrl_ctx) { |
1241 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", | |
1242 | __func__); | |
ddba5cd0 MN |
1243 | ret = -ENOMEM; |
1244 | goto command_cleanup; | |
92f8e767 | 1245 | } |
2d3f1fac | 1246 | /* Set up the modified control endpoint 0 */ |
913a8a34 SS |
1247 | xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx, |
1248 | xhci->devs[slot_id]->out_ctx, ep_index); | |
92f8e767 | 1249 | |
ddba5cd0 | 1250 | ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index); |
28ccd296 ME |
1251 | ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK); |
1252 | ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size)); | |
2d3f1fac | 1253 | |
28ccd296 | 1254 | ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG); |
2d3f1fac SS |
1255 | ctrl_ctx->drop_flags = 0; |
1256 | ||
1257 | xhci_dbg(xhci, "Slot %d input context\n", slot_id); | |
ddba5cd0 | 1258 | xhci_dbg_ctx(xhci, command->in_ctx, ep_index); |
2d3f1fac SS |
1259 | xhci_dbg(xhci, "Slot %d output context\n", slot_id); |
1260 | xhci_dbg_ctx(xhci, out_ctx, ep_index); | |
1261 | ||
ddba5cd0 | 1262 | ret = xhci_configure_endpoint(xhci, urb->dev, command, |
913a8a34 | 1263 | true, false); |
2d3f1fac SS |
1264 | |
1265 | /* Clean up the input context for later use by bandwidth | |
1266 | * functions. | |
1267 | */ | |
28ccd296 | 1268 | ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG); |
ddba5cd0 MN |
1269 | command_cleanup: |
1270 | kfree(command->completion); | |
1271 | kfree(command); | |
2d3f1fac SS |
1272 | } |
1273 | return ret; | |
1274 | } | |
1275 | ||
d0e96f5a SS |
1276 | /* |
1277 | * non-error returns are a promise to giveback() the urb later | |
1278 | * we drop ownership so next owner (or urb unlink) can get it | |
1279 | */ | |
1280 | int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) | |
1281 | { | |
1282 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
2ffdea25 | 1283 | struct xhci_td *buffer; |
d0e96f5a SS |
1284 | unsigned long flags; |
1285 | int ret = 0; | |
1286 | unsigned int slot_id, ep_index; | |
8e51adcc AX |
1287 | struct urb_priv *urb_priv; |
1288 | int size, i; | |
2d3f1fac | 1289 | |
64927730 AX |
1290 | if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, |
1291 | true, true, __func__) <= 0) | |
d0e96f5a SS |
1292 | return -EINVAL; |
1293 | ||
1294 | slot_id = urb->dev->slot_id; | |
1295 | ep_index = xhci_get_endpoint_index(&urb->ep->desc); | |
d0e96f5a | 1296 | |
541c7d43 | 1297 | if (!HCD_HW_ACCESSIBLE(hcd)) { |
d0e96f5a SS |
1298 | if (!in_interrupt()) |
1299 | xhci_dbg(xhci, "urb submitted during PCI suspend\n"); | |
1300 | ret = -ESHUTDOWN; | |
1301 | goto exit; | |
1302 | } | |
8e51adcc AX |
1303 | |
1304 | if (usb_endpoint_xfer_isoc(&urb->ep->desc)) | |
1305 | size = urb->number_of_packets; | |
1306 | else | |
1307 | size = 1; | |
1308 | ||
1309 | urb_priv = kzalloc(sizeof(struct urb_priv) + | |
1310 | size * sizeof(struct xhci_td *), mem_flags); | |
1311 | if (!urb_priv) | |
1312 | return -ENOMEM; | |
1313 | ||
2ffdea25 AX |
1314 | buffer = kzalloc(size * sizeof(struct xhci_td), mem_flags); |
1315 | if (!buffer) { | |
1316 | kfree(urb_priv); | |
1317 | return -ENOMEM; | |
1318 | } | |
1319 | ||
8e51adcc | 1320 | for (i = 0; i < size; i++) { |
2ffdea25 AX |
1321 | urb_priv->td[i] = buffer; |
1322 | buffer++; | |
8e51adcc AX |
1323 | } |
1324 | ||
1325 | urb_priv->length = size; | |
1326 | urb_priv->td_cnt = 0; | |
1327 | urb->hcpriv = urb_priv; | |
1328 | ||
2d3f1fac SS |
1329 | if (usb_endpoint_xfer_control(&urb->ep->desc)) { |
1330 | /* Check to see if the max packet size for the default control | |
1331 | * endpoint changed during FS device enumeration | |
1332 | */ | |
1333 | if (urb->dev->speed == USB_SPEED_FULL) { | |
1334 | ret = xhci_check_maxpacket(xhci, slot_id, | |
1335 | ep_index, urb); | |
d13565c1 SS |
1336 | if (ret < 0) { |
1337 | xhci_urb_free_priv(xhci, urb_priv); | |
1338 | urb->hcpriv = NULL; | |
2d3f1fac | 1339 | return ret; |
d13565c1 | 1340 | } |
2d3f1fac SS |
1341 | } |
1342 | ||
b11069f5 SS |
1343 | /* We have a spinlock and interrupts disabled, so we must pass |
1344 | * atomic context to this function, which may allocate memory. | |
1345 | */ | |
2d3f1fac | 1346 | spin_lock_irqsave(&xhci->lock, flags); |
6f5165cf SS |
1347 | if (xhci->xhc_state & XHCI_STATE_DYING) |
1348 | goto dying; | |
b11069f5 | 1349 | ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb, |
23e3be11 | 1350 | slot_id, ep_index); |
d13565c1 SS |
1351 | if (ret) |
1352 | goto free_priv; | |
2d3f1fac SS |
1353 | spin_unlock_irqrestore(&xhci->lock, flags); |
1354 | } else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) { | |
1355 | spin_lock_irqsave(&xhci->lock, flags); | |
6f5165cf SS |
1356 | if (xhci->xhc_state & XHCI_STATE_DYING) |
1357 | goto dying; | |
8df75f42 SS |
1358 | if (xhci->devs[slot_id]->eps[ep_index].ep_state & |
1359 | EP_GETTING_STREAMS) { | |
1360 | xhci_warn(xhci, "WARN: Can't enqueue URB while bulk ep " | |
1361 | "is transitioning to using streams.\n"); | |
1362 | ret = -EINVAL; | |
1363 | } else if (xhci->devs[slot_id]->eps[ep_index].ep_state & | |
1364 | EP_GETTING_NO_STREAMS) { | |
1365 | xhci_warn(xhci, "WARN: Can't enqueue URB while bulk ep " | |
1366 | "is transitioning to " | |
1367 | "not having streams.\n"); | |
1368 | ret = -EINVAL; | |
1369 | } else { | |
1370 | ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, | |
1371 | slot_id, ep_index); | |
1372 | } | |
d13565c1 SS |
1373 | if (ret) |
1374 | goto free_priv; | |
2d3f1fac | 1375 | spin_unlock_irqrestore(&xhci->lock, flags); |
624defa1 SS |
1376 | } else if (usb_endpoint_xfer_int(&urb->ep->desc)) { |
1377 | spin_lock_irqsave(&xhci->lock, flags); | |
6f5165cf SS |
1378 | if (xhci->xhc_state & XHCI_STATE_DYING) |
1379 | goto dying; | |
624defa1 SS |
1380 | ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb, |
1381 | slot_id, ep_index); | |
d13565c1 SS |
1382 | if (ret) |
1383 | goto free_priv; | |
624defa1 | 1384 | spin_unlock_irqrestore(&xhci->lock, flags); |
2d3f1fac | 1385 | } else { |
787f4e5a AX |
1386 | spin_lock_irqsave(&xhci->lock, flags); |
1387 | if (xhci->xhc_state & XHCI_STATE_DYING) | |
1388 | goto dying; | |
1389 | ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb, | |
1390 | slot_id, ep_index); | |
d13565c1 SS |
1391 | if (ret) |
1392 | goto free_priv; | |
787f4e5a | 1393 | spin_unlock_irqrestore(&xhci->lock, flags); |
2d3f1fac | 1394 | } |
d0e96f5a | 1395 | exit: |
d0e96f5a | 1396 | return ret; |
6f5165cf SS |
1397 | dying: |
1398 | xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for " | |
1399 | "non-responsive xHCI host.\n", | |
1400 | urb->ep->desc.bEndpointAddress, urb); | |
d13565c1 SS |
1401 | ret = -ESHUTDOWN; |
1402 | free_priv: | |
1403 | xhci_urb_free_priv(xhci, urb_priv); | |
1404 | urb->hcpriv = NULL; | |
6f5165cf | 1405 | spin_unlock_irqrestore(&xhci->lock, flags); |
d13565c1 | 1406 | return ret; |
d0e96f5a SS |
1407 | } |
1408 | ||
021bff91 SS |
1409 | /* Get the right ring for the given URB. |
1410 | * If the endpoint supports streams, boundary check the URB's stream ID. | |
1411 | * If the endpoint doesn't support streams, return the singular endpoint ring. | |
1412 | */ | |
1413 | static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, | |
1414 | struct urb *urb) | |
1415 | { | |
1416 | unsigned int slot_id; | |
1417 | unsigned int ep_index; | |
1418 | unsigned int stream_id; | |
1419 | struct xhci_virt_ep *ep; | |
1420 | ||
1421 | slot_id = urb->dev->slot_id; | |
1422 | ep_index = xhci_get_endpoint_index(&urb->ep->desc); | |
1423 | stream_id = urb->stream_id; | |
1424 | ep = &xhci->devs[slot_id]->eps[ep_index]; | |
1425 | /* Common case: no streams */ | |
1426 | if (!(ep->ep_state & EP_HAS_STREAMS)) | |
1427 | return ep->ring; | |
1428 | ||
1429 | if (stream_id == 0) { | |
1430 | xhci_warn(xhci, | |
1431 | "WARN: Slot ID %u, ep index %u has streams, " | |
1432 | "but URB has no stream ID.\n", | |
1433 | slot_id, ep_index); | |
1434 | return NULL; | |
1435 | } | |
1436 | ||
1437 | if (stream_id < ep->stream_info->num_streams) | |
1438 | return ep->stream_info->stream_rings[stream_id]; | |
1439 | ||
1440 | xhci_warn(xhci, | |
1441 | "WARN: Slot ID %u, ep index %u has " | |
1442 | "stream IDs 1 to %u allocated, " | |
1443 | "but stream ID %u is requested.\n", | |
1444 | slot_id, ep_index, | |
1445 | ep->stream_info->num_streams - 1, | |
1446 | stream_id); | |
1447 | return NULL; | |
1448 | } | |
1449 | ||
ae636747 SS |
1450 | /* |
1451 | * Remove the URB's TD from the endpoint ring. This may cause the HC to stop | |
1452 | * USB transfers, potentially stopping in the middle of a TRB buffer. The HC | |
1453 | * should pick up where it left off in the TD, unless a Set Transfer Ring | |
1454 | * Dequeue Pointer is issued. | |
1455 | * | |
1456 | * The TRBs that make up the buffers for the canceled URB will be "removed" from | |
1457 | * the ring. Since the ring is a contiguous structure, they can't be physically | |
1458 | * removed. Instead, there are two options: | |
1459 | * | |
1460 | * 1) If the HC is in the middle of processing the URB to be canceled, we | |
1461 | * simply move the ring's dequeue pointer past those TRBs using the Set | |
1462 | * Transfer Ring Dequeue Pointer command. This will be the common case, | |
1463 | * when drivers timeout on the last submitted URB and attempt to cancel. | |
1464 | * | |
1465 | * 2) If the HC is in the middle of a different TD, we turn the TRBs into a | |
1466 | * series of 1-TRB transfer no-op TDs. (No-ops shouldn't be chained.) The | |
1467 | * HC will need to invalidate the any TRBs it has cached after the stop | |
1468 | * endpoint command, as noted in the xHCI 0.95 errata. | |
1469 | * | |
1470 | * 3) The TD may have completed by the time the Stop Endpoint Command | |
1471 | * completes, so software needs to handle that case too. | |
1472 | * | |
1473 | * This function should protect against the TD enqueueing code ringing the | |
1474 | * doorbell while this code is waiting for a Stop Endpoint command to complete. | |
1475 | * It also needs to account for multiple cancellations on happening at the same | |
1476 | * time for the same endpoint. | |
1477 | * | |
1478 | * Note that this function can be called in any context, or so says | |
1479 | * usb_hcd_unlink_urb() | |
d0e96f5a SS |
1480 | */ |
1481 | int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) | |
1482 | { | |
ae636747 | 1483 | unsigned long flags; |
8e51adcc | 1484 | int ret, i; |
e34b2fbf | 1485 | u32 temp; |
ae636747 | 1486 | struct xhci_hcd *xhci; |
8e51adcc | 1487 | struct urb_priv *urb_priv; |
ae636747 SS |
1488 | struct xhci_td *td; |
1489 | unsigned int ep_index; | |
1490 | struct xhci_ring *ep_ring; | |
63a0d9ab | 1491 | struct xhci_virt_ep *ep; |
ddba5cd0 | 1492 | struct xhci_command *command; |
ae636747 SS |
1493 | |
1494 | xhci = hcd_to_xhci(hcd); | |
1495 | spin_lock_irqsave(&xhci->lock, flags); | |
1496 | /* Make sure the URB hasn't completed or been unlinked already */ | |
1497 | ret = usb_hcd_check_unlink_urb(hcd, urb, status); | |
1498 | if (ret || !urb->hcpriv) | |
1499 | goto done; | |
b0ba9720 | 1500 | temp = readl(&xhci->op_regs->status); |
c6cc27c7 | 1501 | if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) { |
aa50b290 XR |
1502 | xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, |
1503 | "HW died, freeing TD."); | |
8e51adcc | 1504 | urb_priv = urb->hcpriv; |
585df1d9 SS |
1505 | for (i = urb_priv->td_cnt; i < urb_priv->length; i++) { |
1506 | td = urb_priv->td[i]; | |
1507 | if (!list_empty(&td->td_list)) | |
1508 | list_del_init(&td->td_list); | |
1509 | if (!list_empty(&td->cancelled_td_list)) | |
1510 | list_del_init(&td->cancelled_td_list); | |
1511 | } | |
e34b2fbf SS |
1512 | |
1513 | usb_hcd_unlink_urb_from_ep(hcd, urb); | |
1514 | spin_unlock_irqrestore(&xhci->lock, flags); | |
214f76f7 | 1515 | usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN); |
8e51adcc | 1516 | xhci_urb_free_priv(xhci, urb_priv); |
e34b2fbf SS |
1517 | return ret; |
1518 | } | |
7bd89b40 SS |
1519 | if ((xhci->xhc_state & XHCI_STATE_DYING) || |
1520 | (xhci->xhc_state & XHCI_STATE_HALTED)) { | |
aa50b290 XR |
1521 | xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, |
1522 | "Ep 0x%x: URB %p to be canceled on " | |
1523 | "non-responsive xHCI host.", | |
6f5165cf SS |
1524 | urb->ep->desc.bEndpointAddress, urb); |
1525 | /* Let the stop endpoint command watchdog timer (which set this | |
1526 | * state) finish cleaning up the endpoint TD lists. We must | |
1527 | * have caught it in the middle of dropping a lock and giving | |
1528 | * back an URB. | |
1529 | */ | |
1530 | goto done; | |
1531 | } | |
ae636747 | 1532 | |
ae636747 | 1533 | ep_index = xhci_get_endpoint_index(&urb->ep->desc); |
63a0d9ab | 1534 | ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index]; |
e9df17eb SS |
1535 | ep_ring = xhci_urb_to_transfer_ring(xhci, urb); |
1536 | if (!ep_ring) { | |
1537 | ret = -EINVAL; | |
1538 | goto done; | |
1539 | } | |
1540 | ||
8e51adcc | 1541 | urb_priv = urb->hcpriv; |
79688acf SS |
1542 | i = urb_priv->td_cnt; |
1543 | if (i < urb_priv->length) | |
aa50b290 XR |
1544 | xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, |
1545 | "Cancel URB %p, dev %s, ep 0x%x, " | |
1546 | "starting at offset 0x%llx", | |
79688acf SS |
1547 | urb, urb->dev->devpath, |
1548 | urb->ep->desc.bEndpointAddress, | |
1549 | (unsigned long long) xhci_trb_virt_to_dma( | |
1550 | urb_priv->td[i]->start_seg, | |
1551 | urb_priv->td[i]->first_trb)); | |
1552 | ||
1553 | for (; i < urb_priv->length; i++) { | |
8e51adcc AX |
1554 | td = urb_priv->td[i]; |
1555 | list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list); | |
1556 | } | |
1557 | ||
ae636747 SS |
1558 | /* Queue a stop endpoint command, but only if this is |
1559 | * the first cancellation to be handled. | |
1560 | */ | |
678539cf | 1561 | if (!(ep->ep_state & EP_HALT_PENDING)) { |
ddba5cd0 | 1562 | command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); |
a0ee619f HG |
1563 | if (!command) { |
1564 | ret = -ENOMEM; | |
1565 | goto done; | |
1566 | } | |
678539cf | 1567 | ep->ep_state |= EP_HALT_PENDING; |
6f5165cf SS |
1568 | ep->stop_cmds_pending++; |
1569 | ep->stop_cmd_timer.expires = jiffies + | |
1570 | XHCI_STOP_EP_CMD_TIMEOUT * HZ; | |
1571 | add_timer(&ep->stop_cmd_timer); | |
ddba5cd0 MN |
1572 | xhci_queue_stop_endpoint(xhci, command, urb->dev->slot_id, |
1573 | ep_index, 0); | |
23e3be11 | 1574 | xhci_ring_cmd_db(xhci); |
ae636747 SS |
1575 | } |
1576 | done: | |
1577 | spin_unlock_irqrestore(&xhci->lock, flags); | |
1578 | return ret; | |
d0e96f5a SS |
1579 | } |
1580 | ||
f94e0186 SS |
1581 | /* Drop an endpoint from a new bandwidth configuration for this device. |
1582 | * Only one call to this function is allowed per endpoint before | |
1583 | * check_bandwidth() or reset_bandwidth() must be called. | |
1584 | * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will | |
1585 | * add the endpoint to the schedule with possibly new parameters denoted by a | |
1586 | * different endpoint descriptor in usb_host_endpoint. | |
1587 | * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is | |
1588 | * not allowed. | |
f88ba78d SS |
1589 | * |
1590 | * The USB core will not allow URBs to be queued to an endpoint that is being | |
1591 | * disabled, so there's no need for mutual exclusion to protect | |
1592 | * the xhci->devs[slot_id] structure. | |
f94e0186 SS |
1593 | */ |
1594 | int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, | |
1595 | struct usb_host_endpoint *ep) | |
1596 | { | |
f94e0186 | 1597 | struct xhci_hcd *xhci; |
d115b048 JY |
1598 | struct xhci_container_ctx *in_ctx, *out_ctx; |
1599 | struct xhci_input_control_ctx *ctrl_ctx; | |
f94e0186 SS |
1600 | unsigned int ep_index; |
1601 | struct xhci_ep_ctx *ep_ctx; | |
1602 | u32 drop_flag; | |
d6759133 | 1603 | u32 new_add_flags, new_drop_flags; |
f94e0186 SS |
1604 | int ret; |
1605 | ||
64927730 | 1606 | ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); |
f94e0186 SS |
1607 | if (ret <= 0) |
1608 | return ret; | |
1609 | xhci = hcd_to_xhci(hcd); | |
fe6c6c13 SS |
1610 | if (xhci->xhc_state & XHCI_STATE_DYING) |
1611 | return -ENODEV; | |
f94e0186 | 1612 | |
fe6c6c13 | 1613 | xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); |
f94e0186 SS |
1614 | drop_flag = xhci_get_endpoint_flag(&ep->desc); |
1615 | if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) { | |
1616 | xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n", | |
1617 | __func__, drop_flag); | |
1618 | return 0; | |
1619 | } | |
1620 | ||
f94e0186 | 1621 | in_ctx = xhci->devs[udev->slot_id]->in_ctx; |
d115b048 JY |
1622 | out_ctx = xhci->devs[udev->slot_id]->out_ctx; |
1623 | ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); | |
92f8e767 SS |
1624 | if (!ctrl_ctx) { |
1625 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", | |
1626 | __func__); | |
1627 | return 0; | |
1628 | } | |
1629 | ||
f94e0186 | 1630 | ep_index = xhci_get_endpoint_index(&ep->desc); |
d115b048 | 1631 | ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); |
f94e0186 SS |
1632 | /* If the HC already knows the endpoint is disabled, |
1633 | * or the HCD has noted it is disabled, ignore this request | |
1634 | */ | |
f5960b69 ME |
1635 | if (((ep_ctx->ep_info & cpu_to_le32(EP_STATE_MASK)) == |
1636 | cpu_to_le32(EP_STATE_DISABLED)) || | |
28ccd296 ME |
1637 | le32_to_cpu(ctrl_ctx->drop_flags) & |
1638 | xhci_get_endpoint_flag(&ep->desc)) { | |
700e2052 GKH |
1639 | xhci_warn(xhci, "xHCI %s called with disabled ep %p\n", |
1640 | __func__, ep); | |
f94e0186 SS |
1641 | return 0; |
1642 | } | |
1643 | ||
28ccd296 ME |
1644 | ctrl_ctx->drop_flags |= cpu_to_le32(drop_flag); |
1645 | new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags); | |
f94e0186 | 1646 | |
28ccd296 ME |
1647 | ctrl_ctx->add_flags &= cpu_to_le32(~drop_flag); |
1648 | new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); | |
f94e0186 | 1649 | |
f94e0186 SS |
1650 | xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); |
1651 | ||
d6759133 | 1652 | xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", |
f94e0186 SS |
1653 | (unsigned int) ep->desc.bEndpointAddress, |
1654 | udev->slot_id, | |
1655 | (unsigned int) new_drop_flags, | |
d6759133 | 1656 | (unsigned int) new_add_flags); |
f94e0186 SS |
1657 | return 0; |
1658 | } | |
1659 | ||
1660 | /* Add an endpoint to a new possible bandwidth configuration for this device. | |
1661 | * Only one call to this function is allowed per endpoint before | |
1662 | * check_bandwidth() or reset_bandwidth() must be called. | |
1663 | * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will | |
1664 | * add the endpoint to the schedule with possibly new parameters denoted by a | |
1665 | * different endpoint descriptor in usb_host_endpoint. | |
1666 | * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is | |
1667 | * not allowed. | |
f88ba78d SS |
1668 | * |
1669 | * The USB core will not allow URBs to be queued to an endpoint until the | |
1670 | * configuration or alt setting is installed in the device, so there's no need | |
1671 | * for mutual exclusion to protect the xhci->devs[slot_id] structure. | |
f94e0186 SS |
1672 | */ |
1673 | int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, | |
1674 | struct usb_host_endpoint *ep) | |
1675 | { | |
f94e0186 | 1676 | struct xhci_hcd *xhci; |
d115b048 | 1677 | struct xhci_container_ctx *in_ctx, *out_ctx; |
f94e0186 | 1678 | unsigned int ep_index; |
d115b048 | 1679 | struct xhci_input_control_ctx *ctrl_ctx; |
f94e0186 | 1680 | u32 added_ctxs; |
d6759133 | 1681 | u32 new_add_flags, new_drop_flags; |
fa75ac37 | 1682 | struct xhci_virt_device *virt_dev; |
f94e0186 SS |
1683 | int ret = 0; |
1684 | ||
64927730 | 1685 | ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); |
a1587d97 SS |
1686 | if (ret <= 0) { |
1687 | /* So we won't queue a reset ep command for a root hub */ | |
1688 | ep->hcpriv = NULL; | |
f94e0186 | 1689 | return ret; |
a1587d97 | 1690 | } |
f94e0186 | 1691 | xhci = hcd_to_xhci(hcd); |
fe6c6c13 SS |
1692 | if (xhci->xhc_state & XHCI_STATE_DYING) |
1693 | return -ENODEV; | |
f94e0186 SS |
1694 | |
1695 | added_ctxs = xhci_get_endpoint_flag(&ep->desc); | |
f94e0186 SS |
1696 | if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) { |
1697 | /* FIXME when we have to issue an evaluate endpoint command to | |
1698 | * deal with ep0 max packet size changing once we get the | |
1699 | * descriptors | |
1700 | */ | |
1701 | xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n", | |
1702 | __func__, added_ctxs); | |
1703 | return 0; | |
1704 | } | |
1705 | ||
fa75ac37 SS |
1706 | virt_dev = xhci->devs[udev->slot_id]; |
1707 | in_ctx = virt_dev->in_ctx; | |
1708 | out_ctx = virt_dev->out_ctx; | |
d115b048 | 1709 | ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); |
92f8e767 SS |
1710 | if (!ctrl_ctx) { |
1711 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", | |
1712 | __func__); | |
1713 | return 0; | |
1714 | } | |
fa75ac37 | 1715 | |
92f8e767 | 1716 | ep_index = xhci_get_endpoint_index(&ep->desc); |
fa75ac37 SS |
1717 | /* If this endpoint is already in use, and the upper layers are trying |
1718 | * to add it again without dropping it, reject the addition. | |
1719 | */ | |
1720 | if (virt_dev->eps[ep_index].ring && | |
1721 | !(le32_to_cpu(ctrl_ctx->drop_flags) & | |
1722 | xhci_get_endpoint_flag(&ep->desc))) { | |
1723 | xhci_warn(xhci, "Trying to add endpoint 0x%x " | |
1724 | "without dropping it.\n", | |
1725 | (unsigned int) ep->desc.bEndpointAddress); | |
1726 | return -EINVAL; | |
1727 | } | |
1728 | ||
f94e0186 SS |
1729 | /* If the HCD has already noted the endpoint is enabled, |
1730 | * ignore this request. | |
1731 | */ | |
28ccd296 ME |
1732 | if (le32_to_cpu(ctrl_ctx->add_flags) & |
1733 | xhci_get_endpoint_flag(&ep->desc)) { | |
700e2052 GKH |
1734 | xhci_warn(xhci, "xHCI %s called with enabled ep %p\n", |
1735 | __func__, ep); | |
f94e0186 SS |
1736 | return 0; |
1737 | } | |
1738 | ||
f88ba78d SS |
1739 | /* |
1740 | * Configuration and alternate setting changes must be done in | |
1741 | * process context, not interrupt context (or so documenation | |
1742 | * for usb_set_interface() and usb_set_configuration() claim). | |
1743 | */ | |
fa75ac37 | 1744 | if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) { |
f94e0186 SS |
1745 | dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n", |
1746 | __func__, ep->desc.bEndpointAddress); | |
f94e0186 SS |
1747 | return -ENOMEM; |
1748 | } | |
1749 | ||
28ccd296 ME |
1750 | ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); |
1751 | new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); | |
f94e0186 SS |
1752 | |
1753 | /* If xhci_endpoint_disable() was called for this endpoint, but the | |
1754 | * xHC hasn't been notified yet through the check_bandwidth() call, | |
1755 | * this re-adds a new state for the endpoint from the new endpoint | |
1756 | * descriptors. We must drop and re-add this endpoint, so we leave the | |
1757 | * drop flags alone. | |
1758 | */ | |
28ccd296 | 1759 | new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags); |
f94e0186 | 1760 | |
a1587d97 SS |
1761 | /* Store the usb_device pointer for later use */ |
1762 | ep->hcpriv = udev; | |
1763 | ||
d6759133 | 1764 | xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", |
f94e0186 SS |
1765 | (unsigned int) ep->desc.bEndpointAddress, |
1766 | udev->slot_id, | |
1767 | (unsigned int) new_drop_flags, | |
d6759133 | 1768 | (unsigned int) new_add_flags); |
f94e0186 SS |
1769 | return 0; |
1770 | } | |
1771 | ||
d115b048 | 1772 | static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev) |
f94e0186 | 1773 | { |
d115b048 | 1774 | struct xhci_input_control_ctx *ctrl_ctx; |
f94e0186 | 1775 | struct xhci_ep_ctx *ep_ctx; |
d115b048 | 1776 | struct xhci_slot_ctx *slot_ctx; |
f94e0186 SS |
1777 | int i; |
1778 | ||
92f8e767 SS |
1779 | ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); |
1780 | if (!ctrl_ctx) { | |
1781 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", | |
1782 | __func__); | |
1783 | return; | |
1784 | } | |
1785 | ||
f94e0186 SS |
1786 | /* When a device's add flag and drop flag are zero, any subsequent |
1787 | * configure endpoint command will leave that endpoint's state | |
1788 | * untouched. Make sure we don't leave any old state in the input | |
1789 | * endpoint contexts. | |
1790 | */ | |
d115b048 JY |
1791 | ctrl_ctx->drop_flags = 0; |
1792 | ctrl_ctx->add_flags = 0; | |
1793 | slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); | |
28ccd296 | 1794 | slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK); |
f94e0186 | 1795 | /* Endpoint 0 is always valid */ |
28ccd296 | 1796 | slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1)); |
f94e0186 | 1797 | for (i = 1; i < 31; ++i) { |
d115b048 | 1798 | ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i); |
f94e0186 SS |
1799 | ep_ctx->ep_info = 0; |
1800 | ep_ctx->ep_info2 = 0; | |
8e595a5d | 1801 | ep_ctx->deq = 0; |
f94e0186 SS |
1802 | ep_ctx->tx_info = 0; |
1803 | } | |
1804 | } | |
1805 | ||
f2217e8e | 1806 | static int xhci_configure_endpoint_result(struct xhci_hcd *xhci, |
00161f7d | 1807 | struct usb_device *udev, u32 *cmd_status) |
f2217e8e SS |
1808 | { |
1809 | int ret; | |
1810 | ||
913a8a34 | 1811 | switch (*cmd_status) { |
c311e391 MN |
1812 | case COMP_CMD_ABORT: |
1813 | case COMP_CMD_STOP: | |
1814 | xhci_warn(xhci, "Timeout while waiting for configure endpoint command\n"); | |
1815 | ret = -ETIME; | |
1816 | break; | |
f2217e8e | 1817 | case COMP_ENOMEM: |
288c0f44 ON |
1818 | dev_warn(&udev->dev, |
1819 | "Not enough host controller resources for new device state.\n"); | |
f2217e8e SS |
1820 | ret = -ENOMEM; |
1821 | /* FIXME: can we allocate more resources for the HC? */ | |
1822 | break; | |
1823 | case COMP_BW_ERR: | |
71d85724 | 1824 | case COMP_2ND_BW_ERR: |
288c0f44 ON |
1825 | dev_warn(&udev->dev, |
1826 | "Not enough bandwidth for new device state.\n"); | |
f2217e8e SS |
1827 | ret = -ENOSPC; |
1828 | /* FIXME: can we go back to the old state? */ | |
1829 | break; | |
1830 | case COMP_TRB_ERR: | |
1831 | /* the HCD set up something wrong */ | |
1832 | dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, " | |
1833 | "add flag = 1, " | |
1834 | "and endpoint is not disabled.\n"); | |
1835 | ret = -EINVAL; | |
1836 | break; | |
f6ba6fe2 | 1837 | case COMP_DEV_ERR: |
288c0f44 ON |
1838 | dev_warn(&udev->dev, |
1839 | "ERROR: Incompatible device for endpoint configure command.\n"); | |
f6ba6fe2 AH |
1840 | ret = -ENODEV; |
1841 | break; | |
f2217e8e | 1842 | case COMP_SUCCESS: |
3a7fa5be XR |
1843 | xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, |
1844 | "Successful Endpoint Configure command"); | |
f2217e8e SS |
1845 | ret = 0; |
1846 | break; | |
1847 | default: | |
288c0f44 ON |
1848 | xhci_err(xhci, "ERROR: unexpected command completion code 0x%x.\n", |
1849 | *cmd_status); | |
f2217e8e SS |
1850 | ret = -EINVAL; |
1851 | break; | |
1852 | } | |
1853 | return ret; | |
1854 | } | |
1855 | ||
1856 | static int xhci_evaluate_context_result(struct xhci_hcd *xhci, | |
00161f7d | 1857 | struct usb_device *udev, u32 *cmd_status) |
f2217e8e SS |
1858 | { |
1859 | int ret; | |
913a8a34 | 1860 | struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id]; |
f2217e8e | 1861 | |
913a8a34 | 1862 | switch (*cmd_status) { |
c311e391 MN |
1863 | case COMP_CMD_ABORT: |
1864 | case COMP_CMD_STOP: | |
1865 | xhci_warn(xhci, "Timeout while waiting for evaluate context command\n"); | |
1866 | ret = -ETIME; | |
1867 | break; | |
f2217e8e | 1868 | case COMP_EINVAL: |
288c0f44 ON |
1869 | dev_warn(&udev->dev, |
1870 | "WARN: xHCI driver setup invalid evaluate context command.\n"); | |
f2217e8e SS |
1871 | ret = -EINVAL; |
1872 | break; | |
1873 | case COMP_EBADSLT: | |
288c0f44 ON |
1874 | dev_warn(&udev->dev, |
1875 | "WARN: slot not enabled for evaluate context command.\n"); | |
b8031342 SS |
1876 | ret = -EINVAL; |
1877 | break; | |
f2217e8e | 1878 | case COMP_CTX_STATE: |
288c0f44 ON |
1879 | dev_warn(&udev->dev, |
1880 | "WARN: invalid context state for evaluate context command.\n"); | |
f2217e8e SS |
1881 | xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1); |
1882 | ret = -EINVAL; | |
1883 | break; | |
f6ba6fe2 | 1884 | case COMP_DEV_ERR: |
288c0f44 ON |
1885 | dev_warn(&udev->dev, |
1886 | "ERROR: Incompatible device for evaluate context command.\n"); | |
f6ba6fe2 AH |
1887 | ret = -ENODEV; |
1888 | break; | |
1bb73a88 AH |
1889 | case COMP_MEL_ERR: |
1890 | /* Max Exit Latency too large error */ | |
1891 | dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n"); | |
1892 | ret = -EINVAL; | |
1893 | break; | |
f2217e8e | 1894 | case COMP_SUCCESS: |
3a7fa5be XR |
1895 | xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, |
1896 | "Successful evaluate context command"); | |
f2217e8e SS |
1897 | ret = 0; |
1898 | break; | |
1899 | default: | |
288c0f44 ON |
1900 | xhci_err(xhci, "ERROR: unexpected command completion code 0x%x.\n", |
1901 | *cmd_status); | |
f2217e8e SS |
1902 | ret = -EINVAL; |
1903 | break; | |
1904 | } | |
1905 | return ret; | |
1906 | } | |
1907 | ||
2cf95c18 | 1908 | static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci, |
92f8e767 | 1909 | struct xhci_input_control_ctx *ctrl_ctx) |
2cf95c18 | 1910 | { |
2cf95c18 SS |
1911 | u32 valid_add_flags; |
1912 | u32 valid_drop_flags; | |
1913 | ||
2cf95c18 SS |
1914 | /* Ignore the slot flag (bit 0), and the default control endpoint flag |
1915 | * (bit 1). The default control endpoint is added during the Address | |
1916 | * Device command and is never removed until the slot is disabled. | |
1917 | */ | |
ef73400c XR |
1918 | valid_add_flags = le32_to_cpu(ctrl_ctx->add_flags) >> 2; |
1919 | valid_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags) >> 2; | |
2cf95c18 SS |
1920 | |
1921 | /* Use hweight32 to count the number of ones in the add flags, or | |
1922 | * number of endpoints added. Don't count endpoints that are changed | |
1923 | * (both added and dropped). | |
1924 | */ | |
1925 | return hweight32(valid_add_flags) - | |
1926 | hweight32(valid_add_flags & valid_drop_flags); | |
1927 | } | |
1928 | ||
1929 | static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci, | |
92f8e767 | 1930 | struct xhci_input_control_ctx *ctrl_ctx) |
2cf95c18 | 1931 | { |
2cf95c18 SS |
1932 | u32 valid_add_flags; |
1933 | u32 valid_drop_flags; | |
1934 | ||
78d1ff02 XR |
1935 | valid_add_flags = le32_to_cpu(ctrl_ctx->add_flags) >> 2; |
1936 | valid_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags) >> 2; | |
2cf95c18 SS |
1937 | |
1938 | return hweight32(valid_drop_flags) - | |
1939 | hweight32(valid_add_flags & valid_drop_flags); | |
1940 | } | |
1941 | ||
1942 | /* | |
1943 | * We need to reserve the new number of endpoints before the configure endpoint | |
1944 | * command completes. We can't subtract the dropped endpoints from the number | |
1945 | * of active endpoints until the command completes because we can oversubscribe | |
1946 | * the host in this case: | |
1947 | * | |
1948 | * - the first configure endpoint command drops more endpoints than it adds | |
1949 | * - a second configure endpoint command that adds more endpoints is queued | |
1950 | * - the first configure endpoint command fails, so the config is unchanged | |
1951 | * - the second command may succeed, even though there isn't enough resources | |
1952 | * | |
1953 | * Must be called with xhci->lock held. | |
1954 | */ | |
1955 | static int xhci_reserve_host_resources(struct xhci_hcd *xhci, | |
92f8e767 | 1956 | struct xhci_input_control_ctx *ctrl_ctx) |
2cf95c18 SS |
1957 | { |
1958 | u32 added_eps; | |
1959 | ||
92f8e767 | 1960 | added_eps = xhci_count_num_new_endpoints(xhci, ctrl_ctx); |
2cf95c18 | 1961 | if (xhci->num_active_eps + added_eps > xhci->limit_active_eps) { |
4bdfe4c3 XR |
1962 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
1963 | "Not enough ep ctxs: " | |
1964 | "%u active, need to add %u, limit is %u.", | |
2cf95c18 SS |
1965 | xhci->num_active_eps, added_eps, |
1966 | xhci->limit_active_eps); | |
1967 | return -ENOMEM; | |
1968 | } | |
1969 | xhci->num_active_eps += added_eps; | |
4bdfe4c3 XR |
1970 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
1971 | "Adding %u ep ctxs, %u now active.", added_eps, | |
2cf95c18 SS |
1972 | xhci->num_active_eps); |
1973 | return 0; | |
1974 | } | |
1975 | ||
1976 | /* | |
1977 | * The configure endpoint was failed by the xHC for some other reason, so we | |
1978 | * need to revert the resources that failed configuration would have used. | |
1979 | * | |
1980 | * Must be called with xhci->lock held. | |
1981 | */ | |
1982 | static void xhci_free_host_resources(struct xhci_hcd *xhci, | |
92f8e767 | 1983 | struct xhci_input_control_ctx *ctrl_ctx) |
2cf95c18 SS |
1984 | { |
1985 | u32 num_failed_eps; | |
1986 | ||
92f8e767 | 1987 | num_failed_eps = xhci_count_num_new_endpoints(xhci, ctrl_ctx); |
2cf95c18 | 1988 | xhci->num_active_eps -= num_failed_eps; |
4bdfe4c3 XR |
1989 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
1990 | "Removing %u failed ep ctxs, %u now active.", | |
2cf95c18 SS |
1991 | num_failed_eps, |
1992 | xhci->num_active_eps); | |
1993 | } | |
1994 | ||
1995 | /* | |
1996 | * Now that the command has completed, clean up the active endpoint count by | |
1997 | * subtracting out the endpoints that were dropped (but not changed). | |
1998 | * | |
1999 | * Must be called with xhci->lock held. | |
2000 | */ | |
2001 | static void xhci_finish_resource_reservation(struct xhci_hcd *xhci, | |
92f8e767 | 2002 | struct xhci_input_control_ctx *ctrl_ctx) |
2cf95c18 SS |
2003 | { |
2004 | u32 num_dropped_eps; | |
2005 | ||
92f8e767 | 2006 | num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, ctrl_ctx); |
2cf95c18 SS |
2007 | xhci->num_active_eps -= num_dropped_eps; |
2008 | if (num_dropped_eps) | |
4bdfe4c3 XR |
2009 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
2010 | "Removing %u dropped ep ctxs, %u now active.", | |
2cf95c18 SS |
2011 | num_dropped_eps, |
2012 | xhci->num_active_eps); | |
2013 | } | |
2014 | ||
ed384bd3 | 2015 | static unsigned int xhci_get_block_size(struct usb_device *udev) |
c29eea62 SS |
2016 | { |
2017 | switch (udev->speed) { | |
2018 | case USB_SPEED_LOW: | |
2019 | case USB_SPEED_FULL: | |
2020 | return FS_BLOCK; | |
2021 | case USB_SPEED_HIGH: | |
2022 | return HS_BLOCK; | |
2023 | case USB_SPEED_SUPER: | |
2024 | return SS_BLOCK; | |
2025 | case USB_SPEED_UNKNOWN: | |
2026 | case USB_SPEED_WIRELESS: | |
2027 | default: | |
2028 | /* Should never happen */ | |
2029 | return 1; | |
2030 | } | |
2031 | } | |
2032 | ||
ed384bd3 FB |
2033 | static unsigned int |
2034 | xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw) | |
c29eea62 SS |
2035 | { |
2036 | if (interval_bw->overhead[LS_OVERHEAD_TYPE]) | |
2037 | return LS_OVERHEAD; | |
2038 | if (interval_bw->overhead[FS_OVERHEAD_TYPE]) | |
2039 | return FS_OVERHEAD; | |
2040 | return HS_OVERHEAD; | |
2041 | } | |
2042 | ||
2043 | /* If we are changing a LS/FS device under a HS hub, | |
2044 | * make sure (if we are activating a new TT) that the HS bus has enough | |
2045 | * bandwidth for this new TT. | |
2046 | */ | |
2047 | static int xhci_check_tt_bw_table(struct xhci_hcd *xhci, | |
2048 | struct xhci_virt_device *virt_dev, | |
2049 | int old_active_eps) | |
2050 | { | |
2051 | struct xhci_interval_bw_table *bw_table; | |
2052 | struct xhci_tt_bw_info *tt_info; | |
2053 | ||
2054 | /* Find the bandwidth table for the root port this TT is attached to. */ | |
2055 | bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table; | |
2056 | tt_info = virt_dev->tt_info; | |
2057 | /* If this TT already had active endpoints, the bandwidth for this TT | |
2058 | * has already been added. Removing all periodic endpoints (and thus | |
2059 | * making the TT enactive) will only decrease the bandwidth used. | |
2060 | */ | |
2061 | if (old_active_eps) | |
2062 | return 0; | |
2063 | if (old_active_eps == 0 && tt_info->active_eps != 0) { | |
2064 | if (bw_table->bw_used + TT_HS_OVERHEAD > HS_BW_LIMIT) | |
2065 | return -ENOMEM; | |
2066 | return 0; | |
2067 | } | |
2068 | /* Not sure why we would have no new active endpoints... | |
2069 | * | |
2070 | * Maybe because of an Evaluate Context change for a hub update or a | |
2071 | * control endpoint 0 max packet size change? | |
2072 | * FIXME: skip the bandwidth calculation in that case. | |
2073 | */ | |
2074 | return 0; | |
2075 | } | |
2076 | ||
2b698999 SS |
2077 | static int xhci_check_ss_bw(struct xhci_hcd *xhci, |
2078 | struct xhci_virt_device *virt_dev) | |
2079 | { | |
2080 | unsigned int bw_reserved; | |
2081 | ||
2082 | bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_IN, 100); | |
2083 | if (virt_dev->bw_table->ss_bw_in > (SS_BW_LIMIT_IN - bw_reserved)) | |
2084 | return -ENOMEM; | |
2085 | ||
2086 | bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_OUT, 100); | |
2087 | if (virt_dev->bw_table->ss_bw_out > (SS_BW_LIMIT_OUT - bw_reserved)) | |
2088 | return -ENOMEM; | |
2089 | ||
2090 | return 0; | |
2091 | } | |
2092 | ||
c29eea62 SS |
2093 | /* |
2094 | * This algorithm is a very conservative estimate of the worst-case scheduling | |
2095 | * scenario for any one interval. The hardware dynamically schedules the | |
2096 | * packets, so we can't tell which microframe could be the limiting factor in | |
2097 | * the bandwidth scheduling. This only takes into account periodic endpoints. | |
2098 | * | |
2099 | * Obviously, we can't solve an NP complete problem to find the minimum worst | |
2100 | * case scenario. Instead, we come up with an estimate that is no less than | |
2101 | * the worst case bandwidth used for any one microframe, but may be an | |
2102 | * over-estimate. | |
2103 | * | |
2104 | * We walk the requirements for each endpoint by interval, starting with the | |
2105 | * smallest interval, and place packets in the schedule where there is only one | |
2106 | * possible way to schedule packets for that interval. In order to simplify | |
2107 | * this algorithm, we record the largest max packet size for each interval, and | |
2108 | * assume all packets will be that size. | |
2109 | * | |
2110 | * For interval 0, we obviously must schedule all packets for each interval. | |
2111 | * The bandwidth for interval 0 is just the amount of data to be transmitted | |
2112 | * (the sum of all max ESIT payload sizes, plus any overhead per packet times | |
2113 | * the number of packets). | |
2114 | * | |
2115 | * For interval 1, we have two possible microframes to schedule those packets | |
2116 | * in. For this algorithm, if we can schedule the same number of packets for | |
2117 | * each possible scheduling opportunity (each microframe), we will do so. The | |
2118 | * remaining number of packets will be saved to be transmitted in the gaps in | |
2119 | * the next interval's scheduling sequence. | |
2120 | * | |
2121 | * As we move those remaining packets to be scheduled with interval 2 packets, | |
2122 | * we have to double the number of remaining packets to transmit. This is | |
2123 | * because the intervals are actually powers of 2, and we would be transmitting | |
2124 | * the previous interval's packets twice in this interval. We also have to be | |
2125 | * sure that when we look at the largest max packet size for this interval, we | |
2126 | * also look at the largest max packet size for the remaining packets and take | |
2127 | * the greater of the two. | |
2128 | * | |
2129 | * The algorithm continues to evenly distribute packets in each scheduling | |
2130 | * opportunity, and push the remaining packets out, until we get to the last | |
2131 | * interval. Then those packets and their associated overhead are just added | |
2132 | * to the bandwidth used. | |
2e27980e SS |
2133 | */ |
2134 | static int xhci_check_bw_table(struct xhci_hcd *xhci, | |
2135 | struct xhci_virt_device *virt_dev, | |
2136 | int old_active_eps) | |
2137 | { | |
c29eea62 SS |
2138 | unsigned int bw_reserved; |
2139 | unsigned int max_bandwidth; | |
2140 | unsigned int bw_used; | |
2141 | unsigned int block_size; | |
2142 | struct xhci_interval_bw_table *bw_table; | |
2143 | unsigned int packet_size = 0; | |
2144 | unsigned int overhead = 0; | |
2145 | unsigned int packets_transmitted = 0; | |
2146 | unsigned int packets_remaining = 0; | |
2147 | unsigned int i; | |
2148 | ||
2b698999 SS |
2149 | if (virt_dev->udev->speed == USB_SPEED_SUPER) |
2150 | return xhci_check_ss_bw(xhci, virt_dev); | |
2151 | ||
c29eea62 SS |
2152 | if (virt_dev->udev->speed == USB_SPEED_HIGH) { |
2153 | max_bandwidth = HS_BW_LIMIT; | |
2154 | /* Convert percent of bus BW reserved to blocks reserved */ | |
2155 | bw_reserved = DIV_ROUND_UP(HS_BW_RESERVED * max_bandwidth, 100); | |
2156 | } else { | |
2157 | max_bandwidth = FS_BW_LIMIT; | |
2158 | bw_reserved = DIV_ROUND_UP(FS_BW_RESERVED * max_bandwidth, 100); | |
2159 | } | |
2160 | ||
2161 | bw_table = virt_dev->bw_table; | |
2162 | /* We need to translate the max packet size and max ESIT payloads into | |
2163 | * the units the hardware uses. | |
2164 | */ | |
2165 | block_size = xhci_get_block_size(virt_dev->udev); | |
2166 | ||
2167 | /* If we are manipulating a LS/FS device under a HS hub, double check | |
2168 | * that the HS bus has enough bandwidth if we are activing a new TT. | |
2169 | */ | |
2170 | if (virt_dev->tt_info) { | |
4bdfe4c3 XR |
2171 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
2172 | "Recalculating BW for rootport %u", | |
c29eea62 SS |
2173 | virt_dev->real_port); |
2174 | if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) { | |
2175 | xhci_warn(xhci, "Not enough bandwidth on HS bus for " | |
2176 | "newly activated TT.\n"); | |
2177 | return -ENOMEM; | |
2178 | } | |
4bdfe4c3 XR |
2179 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
2180 | "Recalculating BW for TT slot %u port %u", | |
c29eea62 SS |
2181 | virt_dev->tt_info->slot_id, |
2182 | virt_dev->tt_info->ttport); | |
2183 | } else { | |
4bdfe4c3 XR |
2184 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
2185 | "Recalculating BW for rootport %u", | |
c29eea62 SS |
2186 | virt_dev->real_port); |
2187 | } | |
2188 | ||
2189 | /* Add in how much bandwidth will be used for interval zero, or the | |
2190 | * rounded max ESIT payload + number of packets * largest overhead. | |
2191 | */ | |
2192 | bw_used = DIV_ROUND_UP(bw_table->interval0_esit_payload, block_size) + | |
2193 | bw_table->interval_bw[0].num_packets * | |
2194 | xhci_get_largest_overhead(&bw_table->interval_bw[0]); | |
2195 | ||
2196 | for (i = 1; i < XHCI_MAX_INTERVAL; i++) { | |
2197 | unsigned int bw_added; | |
2198 | unsigned int largest_mps; | |
2199 | unsigned int interval_overhead; | |
2200 | ||
2201 | /* | |
2202 | * How many packets could we transmit in this interval? | |
2203 | * If packets didn't fit in the previous interval, we will need | |
2204 | * to transmit that many packets twice within this interval. | |
2205 | */ | |
2206 | packets_remaining = 2 * packets_remaining + | |
2207 | bw_table->interval_bw[i].num_packets; | |
2208 | ||
2209 | /* Find the largest max packet size of this or the previous | |
2210 | * interval. | |
2211 | */ | |
2212 | if (list_empty(&bw_table->interval_bw[i].endpoints)) | |
2213 | largest_mps = 0; | |
2214 | else { | |
2215 | struct xhci_virt_ep *virt_ep; | |
2216 | struct list_head *ep_entry; | |
2217 | ||
2218 | ep_entry = bw_table->interval_bw[i].endpoints.next; | |
2219 | virt_ep = list_entry(ep_entry, | |
2220 | struct xhci_virt_ep, bw_endpoint_list); | |
2221 | /* Convert to blocks, rounding up */ | |
2222 | largest_mps = DIV_ROUND_UP( | |
2223 | virt_ep->bw_info.max_packet_size, | |
2224 | block_size); | |
2225 | } | |
2226 | if (largest_mps > packet_size) | |
2227 | packet_size = largest_mps; | |
2228 | ||
2229 | /* Use the larger overhead of this or the previous interval. */ | |
2230 | interval_overhead = xhci_get_largest_overhead( | |
2231 | &bw_table->interval_bw[i]); | |
2232 | if (interval_overhead > overhead) | |
2233 | overhead = interval_overhead; | |
2234 | ||
2235 | /* How many packets can we evenly distribute across | |
2236 | * (1 << (i + 1)) possible scheduling opportunities? | |
2237 | */ | |
2238 | packets_transmitted = packets_remaining >> (i + 1); | |
2239 | ||
2240 | /* Add in the bandwidth used for those scheduled packets */ | |
2241 | bw_added = packets_transmitted * (overhead + packet_size); | |
2242 | ||
2243 | /* How many packets do we have remaining to transmit? */ | |
2244 | packets_remaining = packets_remaining % (1 << (i + 1)); | |
2245 | ||
2246 | /* What largest max packet size should those packets have? */ | |
2247 | /* If we've transmitted all packets, don't carry over the | |
2248 | * largest packet size. | |
2249 | */ | |
2250 | if (packets_remaining == 0) { | |
2251 | packet_size = 0; | |
2252 | overhead = 0; | |
2253 | } else if (packets_transmitted > 0) { | |
2254 | /* Otherwise if we do have remaining packets, and we've | |
2255 | * scheduled some packets in this interval, take the | |
2256 | * largest max packet size from endpoints with this | |
2257 | * interval. | |
2258 | */ | |
2259 | packet_size = largest_mps; | |
2260 | overhead = interval_overhead; | |
2261 | } | |
2262 | /* Otherwise carry over packet_size and overhead from the last | |
2263 | * time we had a remainder. | |
2264 | */ | |
2265 | bw_used += bw_added; | |
2266 | if (bw_used > max_bandwidth) { | |
2267 | xhci_warn(xhci, "Not enough bandwidth. " | |
2268 | "Proposed: %u, Max: %u\n", | |
2269 | bw_used, max_bandwidth); | |
2270 | return -ENOMEM; | |
2271 | } | |
2272 | } | |
2273 | /* | |
2274 | * Ok, we know we have some packets left over after even-handedly | |
2275 | * scheduling interval 15. We don't know which microframes they will | |
2276 | * fit into, so we over-schedule and say they will be scheduled every | |
2277 | * microframe. | |
2278 | */ | |
2279 | if (packets_remaining > 0) | |
2280 | bw_used += overhead + packet_size; | |
2281 | ||
2282 | if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) { | |
2283 | unsigned int port_index = virt_dev->real_port - 1; | |
2284 | ||
2285 | /* OK, we're manipulating a HS device attached to a | |
2286 | * root port bandwidth domain. Include the number of active TTs | |
2287 | * in the bandwidth used. | |
2288 | */ | |
2289 | bw_used += TT_HS_OVERHEAD * | |
2290 | xhci->rh_bw[port_index].num_active_tts; | |
2291 | } | |
2292 | ||
4bdfe4c3 XR |
2293 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
2294 | "Final bandwidth: %u, Limit: %u, Reserved: %u, " | |
2295 | "Available: %u " "percent", | |
c29eea62 SS |
2296 | bw_used, max_bandwidth, bw_reserved, |
2297 | (max_bandwidth - bw_used - bw_reserved) * 100 / | |
2298 | max_bandwidth); | |
2299 | ||
2300 | bw_used += bw_reserved; | |
2301 | if (bw_used > max_bandwidth) { | |
2302 | xhci_warn(xhci, "Not enough bandwidth. Proposed: %u, Max: %u\n", | |
2303 | bw_used, max_bandwidth); | |
2304 | return -ENOMEM; | |
2305 | } | |
2306 | ||
2307 | bw_table->bw_used = bw_used; | |
2e27980e SS |
2308 | return 0; |
2309 | } | |
2310 | ||
2311 | static bool xhci_is_async_ep(unsigned int ep_type) | |
2312 | { | |
2313 | return (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP && | |
2314 | ep_type != ISOC_IN_EP && | |
2315 | ep_type != INT_IN_EP); | |
2316 | } | |
2317 | ||
2b698999 SS |
2318 | static bool xhci_is_sync_in_ep(unsigned int ep_type) |
2319 | { | |
392a07ae | 2320 | return (ep_type == ISOC_IN_EP || ep_type == INT_IN_EP); |
2b698999 SS |
2321 | } |
2322 | ||
2323 | static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw) | |
2324 | { | |
2325 | unsigned int mps = DIV_ROUND_UP(ep_bw->max_packet_size, SS_BLOCK); | |
2326 | ||
2327 | if (ep_bw->ep_interval == 0) | |
2328 | return SS_OVERHEAD_BURST + | |
2329 | (ep_bw->mult * ep_bw->num_packets * | |
2330 | (SS_OVERHEAD + mps)); | |
2331 | return DIV_ROUND_UP(ep_bw->mult * ep_bw->num_packets * | |
2332 | (SS_OVERHEAD + mps + SS_OVERHEAD_BURST), | |
2333 | 1 << ep_bw->ep_interval); | |
2334 | ||
2335 | } | |
2336 | ||
2e27980e SS |
2337 | void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci, |
2338 | struct xhci_bw_info *ep_bw, | |
2339 | struct xhci_interval_bw_table *bw_table, | |
2340 | struct usb_device *udev, | |
2341 | struct xhci_virt_ep *virt_ep, | |
2342 | struct xhci_tt_bw_info *tt_info) | |
2343 | { | |
2344 | struct xhci_interval_bw *interval_bw; | |
2345 | int normalized_interval; | |
2346 | ||
2b698999 | 2347 | if (xhci_is_async_ep(ep_bw->type)) |
2e27980e SS |
2348 | return; |
2349 | ||
2b698999 SS |
2350 | if (udev->speed == USB_SPEED_SUPER) { |
2351 | if (xhci_is_sync_in_ep(ep_bw->type)) | |
2352 | xhci->devs[udev->slot_id]->bw_table->ss_bw_in -= | |
2353 | xhci_get_ss_bw_consumed(ep_bw); | |
2354 | else | |
2355 | xhci->devs[udev->slot_id]->bw_table->ss_bw_out -= | |
2356 | xhci_get_ss_bw_consumed(ep_bw); | |
2357 | return; | |
2358 | } | |
2359 | ||
2360 | /* SuperSpeed endpoints never get added to intervals in the table, so | |
2361 | * this check is only valid for HS/FS/LS devices. | |
2362 | */ | |
2363 | if (list_empty(&virt_ep->bw_endpoint_list)) | |
2364 | return; | |
2e27980e SS |
2365 | /* For LS/FS devices, we need to translate the interval expressed in |
2366 | * microframes to frames. | |
2367 | */ | |
2368 | if (udev->speed == USB_SPEED_HIGH) | |
2369 | normalized_interval = ep_bw->ep_interval; | |
2370 | else | |
2371 | normalized_interval = ep_bw->ep_interval - 3; | |
2372 | ||
2373 | if (normalized_interval == 0) | |
2374 | bw_table->interval0_esit_payload -= ep_bw->max_esit_payload; | |
2375 | interval_bw = &bw_table->interval_bw[normalized_interval]; | |
2376 | interval_bw->num_packets -= ep_bw->num_packets; | |
2377 | switch (udev->speed) { | |
2378 | case USB_SPEED_LOW: | |
2379 | interval_bw->overhead[LS_OVERHEAD_TYPE] -= 1; | |
2380 | break; | |
2381 | case USB_SPEED_FULL: | |
2382 | interval_bw->overhead[FS_OVERHEAD_TYPE] -= 1; | |
2383 | break; | |
2384 | case USB_SPEED_HIGH: | |
2385 | interval_bw->overhead[HS_OVERHEAD_TYPE] -= 1; | |
2386 | break; | |
2387 | case USB_SPEED_SUPER: | |
2388 | case USB_SPEED_UNKNOWN: | |
2389 | case USB_SPEED_WIRELESS: | |
2390 | /* Should never happen because only LS/FS/HS endpoints will get | |
2391 | * added to the endpoint list. | |
2392 | */ | |
2393 | return; | |
2394 | } | |
2395 | if (tt_info) | |
2396 | tt_info->active_eps -= 1; | |
2397 | list_del_init(&virt_ep->bw_endpoint_list); | |
2398 | } | |
2399 | ||
2400 | static void xhci_add_ep_to_interval_table(struct xhci_hcd *xhci, | |
2401 | struct xhci_bw_info *ep_bw, | |
2402 | struct xhci_interval_bw_table *bw_table, | |
2403 | struct usb_device *udev, | |
2404 | struct xhci_virt_ep *virt_ep, | |
2405 | struct xhci_tt_bw_info *tt_info) | |
2406 | { | |
2407 | struct xhci_interval_bw *interval_bw; | |
2408 | struct xhci_virt_ep *smaller_ep; | |
2409 | int normalized_interval; | |
2410 | ||
2411 | if (xhci_is_async_ep(ep_bw->type)) | |
2412 | return; | |
2413 | ||
2b698999 SS |
2414 | if (udev->speed == USB_SPEED_SUPER) { |
2415 | if (xhci_is_sync_in_ep(ep_bw->type)) | |
2416 | xhci->devs[udev->slot_id]->bw_table->ss_bw_in += | |
2417 | xhci_get_ss_bw_consumed(ep_bw); | |
2418 | else | |
2419 | xhci->devs[udev->slot_id]->bw_table->ss_bw_out += | |
2420 | xhci_get_ss_bw_consumed(ep_bw); | |
2421 | return; | |
2422 | } | |
2423 | ||
2e27980e SS |
2424 | /* For LS/FS devices, we need to translate the interval expressed in |
2425 | * microframes to frames. | |
2426 | */ | |
2427 | if (udev->speed == USB_SPEED_HIGH) | |
2428 | normalized_interval = ep_bw->ep_interval; | |
2429 | else | |
2430 | normalized_interval = ep_bw->ep_interval - 3; | |
2431 | ||
2432 | if (normalized_interval == 0) | |
2433 | bw_table->interval0_esit_payload += ep_bw->max_esit_payload; | |
2434 | interval_bw = &bw_table->interval_bw[normalized_interval]; | |
2435 | interval_bw->num_packets += ep_bw->num_packets; | |
2436 | switch (udev->speed) { | |
2437 | case USB_SPEED_LOW: | |
2438 | interval_bw->overhead[LS_OVERHEAD_TYPE] += 1; | |
2439 | break; | |
2440 | case USB_SPEED_FULL: | |
2441 | interval_bw->overhead[FS_OVERHEAD_TYPE] += 1; | |
2442 | break; | |
2443 | case USB_SPEED_HIGH: | |
2444 | interval_bw->overhead[HS_OVERHEAD_TYPE] += 1; | |
2445 | break; | |
2446 | case USB_SPEED_SUPER: | |
2447 | case USB_SPEED_UNKNOWN: | |
2448 | case USB_SPEED_WIRELESS: | |
2449 | /* Should never happen because only LS/FS/HS endpoints will get | |
2450 | * added to the endpoint list. | |
2451 | */ | |
2452 | return; | |
2453 | } | |
2454 | ||
2455 | if (tt_info) | |
2456 | tt_info->active_eps += 1; | |
2457 | /* Insert the endpoint into the list, largest max packet size first. */ | |
2458 | list_for_each_entry(smaller_ep, &interval_bw->endpoints, | |
2459 | bw_endpoint_list) { | |
2460 | if (ep_bw->max_packet_size >= | |
2461 | smaller_ep->bw_info.max_packet_size) { | |
2462 | /* Add the new ep before the smaller endpoint */ | |
2463 | list_add_tail(&virt_ep->bw_endpoint_list, | |
2464 | &smaller_ep->bw_endpoint_list); | |
2465 | return; | |
2466 | } | |
2467 | } | |
2468 | /* Add the new endpoint at the end of the list. */ | |
2469 | list_add_tail(&virt_ep->bw_endpoint_list, | |
2470 | &interval_bw->endpoints); | |
2471 | } | |
2472 | ||
2473 | void xhci_update_tt_active_eps(struct xhci_hcd *xhci, | |
2474 | struct xhci_virt_device *virt_dev, | |
2475 | int old_active_eps) | |
2476 | { | |
2477 | struct xhci_root_port_bw_info *rh_bw_info; | |
2478 | if (!virt_dev->tt_info) | |
2479 | return; | |
2480 | ||
2481 | rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1]; | |
2482 | if (old_active_eps == 0 && | |
2483 | virt_dev->tt_info->active_eps != 0) { | |
2484 | rh_bw_info->num_active_tts += 1; | |
c29eea62 | 2485 | rh_bw_info->bw_table.bw_used += TT_HS_OVERHEAD; |
2e27980e SS |
2486 | } else if (old_active_eps != 0 && |
2487 | virt_dev->tt_info->active_eps == 0) { | |
2488 | rh_bw_info->num_active_tts -= 1; | |
c29eea62 | 2489 | rh_bw_info->bw_table.bw_used -= TT_HS_OVERHEAD; |
2e27980e SS |
2490 | } |
2491 | } | |
2492 | ||
2493 | static int xhci_reserve_bandwidth(struct xhci_hcd *xhci, | |
2494 | struct xhci_virt_device *virt_dev, | |
2495 | struct xhci_container_ctx *in_ctx) | |
2496 | { | |
2497 | struct xhci_bw_info ep_bw_info[31]; | |
2498 | int i; | |
2499 | struct xhci_input_control_ctx *ctrl_ctx; | |
2500 | int old_active_eps = 0; | |
2501 | ||
2e27980e SS |
2502 | if (virt_dev->tt_info) |
2503 | old_active_eps = virt_dev->tt_info->active_eps; | |
2504 | ||
2505 | ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); | |
92f8e767 SS |
2506 | if (!ctrl_ctx) { |
2507 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", | |
2508 | __func__); | |
2509 | return -ENOMEM; | |
2510 | } | |
2e27980e SS |
2511 | |
2512 | for (i = 0; i < 31; i++) { | |
2513 | if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i)) | |
2514 | continue; | |
2515 | ||
2516 | /* Make a copy of the BW info in case we need to revert this */ | |
2517 | memcpy(&ep_bw_info[i], &virt_dev->eps[i].bw_info, | |
2518 | sizeof(ep_bw_info[i])); | |
2519 | /* Drop the endpoint from the interval table if the endpoint is | |
2520 | * being dropped or changed. | |
2521 | */ | |
2522 | if (EP_IS_DROPPED(ctrl_ctx, i)) | |
2523 | xhci_drop_ep_from_interval_table(xhci, | |
2524 | &virt_dev->eps[i].bw_info, | |
2525 | virt_dev->bw_table, | |
2526 | virt_dev->udev, | |
2527 | &virt_dev->eps[i], | |
2528 | virt_dev->tt_info); | |
2529 | } | |
2530 | /* Overwrite the information stored in the endpoints' bw_info */ | |
2531 | xhci_update_bw_info(xhci, virt_dev->in_ctx, ctrl_ctx, virt_dev); | |
2532 | for (i = 0; i < 31; i++) { | |
2533 | /* Add any changed or added endpoints to the interval table */ | |
2534 | if (EP_IS_ADDED(ctrl_ctx, i)) | |
2535 | xhci_add_ep_to_interval_table(xhci, | |
2536 | &virt_dev->eps[i].bw_info, | |
2537 | virt_dev->bw_table, | |
2538 | virt_dev->udev, | |
2539 | &virt_dev->eps[i], | |
2540 | virt_dev->tt_info); | |
2541 | } | |
2542 | ||
2543 | if (!xhci_check_bw_table(xhci, virt_dev, old_active_eps)) { | |
2544 | /* Ok, this fits in the bandwidth we have. | |
2545 | * Update the number of active TTs. | |
2546 | */ | |
2547 | xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps); | |
2548 | return 0; | |
2549 | } | |
2550 | ||
2551 | /* We don't have enough bandwidth for this, revert the stored info. */ | |
2552 | for (i = 0; i < 31; i++) { | |
2553 | if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i)) | |
2554 | continue; | |
2555 | ||
2556 | /* Drop the new copies of any added or changed endpoints from | |
2557 | * the interval table. | |
2558 | */ | |
2559 | if (EP_IS_ADDED(ctrl_ctx, i)) { | |
2560 | xhci_drop_ep_from_interval_table(xhci, | |
2561 | &virt_dev->eps[i].bw_info, | |
2562 | virt_dev->bw_table, | |
2563 | virt_dev->udev, | |
2564 | &virt_dev->eps[i], | |
2565 | virt_dev->tt_info); | |
2566 | } | |
2567 | /* Revert the endpoint back to its old information */ | |
2568 | memcpy(&virt_dev->eps[i].bw_info, &ep_bw_info[i], | |
2569 | sizeof(ep_bw_info[i])); | |
2570 | /* Add any changed or dropped endpoints back into the table */ | |
2571 | if (EP_IS_DROPPED(ctrl_ctx, i)) | |
2572 | xhci_add_ep_to_interval_table(xhci, | |
2573 | &virt_dev->eps[i].bw_info, | |
2574 | virt_dev->bw_table, | |
2575 | virt_dev->udev, | |
2576 | &virt_dev->eps[i], | |
2577 | virt_dev->tt_info); | |
2578 | } | |
2579 | return -ENOMEM; | |
2580 | } | |
2581 | ||
2582 | ||
f2217e8e SS |
2583 | /* Issue a configure endpoint command or evaluate context command |
2584 | * and wait for it to finish. | |
2585 | */ | |
2586 | static int xhci_configure_endpoint(struct xhci_hcd *xhci, | |
913a8a34 SS |
2587 | struct usb_device *udev, |
2588 | struct xhci_command *command, | |
2589 | bool ctx_change, bool must_succeed) | |
f2217e8e SS |
2590 | { |
2591 | int ret; | |
f2217e8e | 2592 | unsigned long flags; |
92f8e767 | 2593 | struct xhci_input_control_ctx *ctrl_ctx; |
913a8a34 | 2594 | struct xhci_virt_device *virt_dev; |
ddba5cd0 MN |
2595 | |
2596 | if (!command) | |
2597 | return -EINVAL; | |
f2217e8e SS |
2598 | |
2599 | spin_lock_irqsave(&xhci->lock, flags); | |
913a8a34 | 2600 | virt_dev = xhci->devs[udev->slot_id]; |
750645f8 | 2601 | |
ddba5cd0 | 2602 | ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); |
92f8e767 | 2603 | if (!ctrl_ctx) { |
1f21569c | 2604 | spin_unlock_irqrestore(&xhci->lock, flags); |
92f8e767 SS |
2605 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", |
2606 | __func__); | |
2607 | return -ENOMEM; | |
2608 | } | |
2cf95c18 | 2609 | |
750645f8 | 2610 | if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) && |
92f8e767 | 2611 | xhci_reserve_host_resources(xhci, ctrl_ctx)) { |
750645f8 SS |
2612 | spin_unlock_irqrestore(&xhci->lock, flags); |
2613 | xhci_warn(xhci, "Not enough host resources, " | |
2614 | "active endpoint contexts = %u\n", | |
2615 | xhci->num_active_eps); | |
2616 | return -ENOMEM; | |
2617 | } | |
2e27980e | 2618 | if ((xhci->quirks & XHCI_SW_BW_CHECKING) && |
ddba5cd0 | 2619 | xhci_reserve_bandwidth(xhci, virt_dev, command->in_ctx)) { |
2e27980e | 2620 | if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) |
92f8e767 | 2621 | xhci_free_host_resources(xhci, ctrl_ctx); |
2e27980e SS |
2622 | spin_unlock_irqrestore(&xhci->lock, flags); |
2623 | xhci_warn(xhci, "Not enough bandwidth\n"); | |
2624 | return -ENOMEM; | |
2625 | } | |
750645f8 | 2626 | |
f2217e8e | 2627 | if (!ctx_change) |
ddba5cd0 MN |
2628 | ret = xhci_queue_configure_endpoint(xhci, command, |
2629 | command->in_ctx->dma, | |
913a8a34 | 2630 | udev->slot_id, must_succeed); |
f2217e8e | 2631 | else |
ddba5cd0 MN |
2632 | ret = xhci_queue_evaluate_context(xhci, command, |
2633 | command->in_ctx->dma, | |
4b266541 | 2634 | udev->slot_id, must_succeed); |
f2217e8e | 2635 | if (ret < 0) { |
2cf95c18 | 2636 | if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) |
92f8e767 | 2637 | xhci_free_host_resources(xhci, ctrl_ctx); |
f2217e8e | 2638 | spin_unlock_irqrestore(&xhci->lock, flags); |
3a7fa5be XR |
2639 | xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, |
2640 | "FIXME allocate a new ring segment"); | |
f2217e8e SS |
2641 | return -ENOMEM; |
2642 | } | |
2643 | xhci_ring_cmd_db(xhci); | |
2644 | spin_unlock_irqrestore(&xhci->lock, flags); | |
2645 | ||
2646 | /* Wait for the configure endpoint command to complete */ | |
c311e391 | 2647 | wait_for_completion(command->completion); |
f2217e8e SS |
2648 | |
2649 | if (!ctx_change) | |
ddba5cd0 MN |
2650 | ret = xhci_configure_endpoint_result(xhci, udev, |
2651 | &command->status); | |
2cf95c18 | 2652 | else |
ddba5cd0 MN |
2653 | ret = xhci_evaluate_context_result(xhci, udev, |
2654 | &command->status); | |
2cf95c18 SS |
2655 | |
2656 | if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) { | |
2657 | spin_lock_irqsave(&xhci->lock, flags); | |
2658 | /* If the command failed, remove the reserved resources. | |
2659 | * Otherwise, clean up the estimate to include dropped eps. | |
2660 | */ | |
2661 | if (ret) | |
92f8e767 | 2662 | xhci_free_host_resources(xhci, ctrl_ctx); |
2cf95c18 | 2663 | else |
92f8e767 | 2664 | xhci_finish_resource_reservation(xhci, ctrl_ctx); |
2cf95c18 SS |
2665 | spin_unlock_irqrestore(&xhci->lock, flags); |
2666 | } | |
2667 | return ret; | |
f2217e8e SS |
2668 | } |
2669 | ||
df613834 HG |
2670 | static void xhci_check_bw_drop_ep_streams(struct xhci_hcd *xhci, |
2671 | struct xhci_virt_device *vdev, int i) | |
2672 | { | |
2673 | struct xhci_virt_ep *ep = &vdev->eps[i]; | |
2674 | ||
2675 | if (ep->ep_state & EP_HAS_STREAMS) { | |
2676 | xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on set_interface, freeing streams.\n", | |
2677 | xhci_get_endpoint_address(i)); | |
2678 | xhci_free_stream_info(xhci, ep->stream_info); | |
2679 | ep->stream_info = NULL; | |
2680 | ep->ep_state &= ~EP_HAS_STREAMS; | |
2681 | } | |
2682 | } | |
2683 | ||
f88ba78d SS |
2684 | /* Called after one or more calls to xhci_add_endpoint() or |
2685 | * xhci_drop_endpoint(). If this call fails, the USB core is expected | |
2686 | * to call xhci_reset_bandwidth(). | |
2687 | * | |
2688 | * Since we are in the middle of changing either configuration or | |
2689 | * installing a new alt setting, the USB core won't allow URBs to be | |
2690 | * enqueued for any endpoint on the old config or interface. Nothing | |
2691 | * else should be touching the xhci->devs[slot_id] structure, so we | |
2692 | * don't need to take the xhci->lock for manipulating that. | |
2693 | */ | |
f94e0186 SS |
2694 | int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) |
2695 | { | |
2696 | int i; | |
2697 | int ret = 0; | |
f94e0186 SS |
2698 | struct xhci_hcd *xhci; |
2699 | struct xhci_virt_device *virt_dev; | |
d115b048 JY |
2700 | struct xhci_input_control_ctx *ctrl_ctx; |
2701 | struct xhci_slot_ctx *slot_ctx; | |
ddba5cd0 | 2702 | struct xhci_command *command; |
f94e0186 | 2703 | |
64927730 | 2704 | ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__); |
f94e0186 SS |
2705 | if (ret <= 0) |
2706 | return ret; | |
2707 | xhci = hcd_to_xhci(hcd); | |
fe6c6c13 SS |
2708 | if (xhci->xhc_state & XHCI_STATE_DYING) |
2709 | return -ENODEV; | |
f94e0186 | 2710 | |
700e2052 | 2711 | xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); |
f94e0186 SS |
2712 | virt_dev = xhci->devs[udev->slot_id]; |
2713 | ||
ddba5cd0 MN |
2714 | command = xhci_alloc_command(xhci, false, true, GFP_KERNEL); |
2715 | if (!command) | |
2716 | return -ENOMEM; | |
2717 | ||
2718 | command->in_ctx = virt_dev->in_ctx; | |
2719 | ||
f94e0186 | 2720 | /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */ |
ddba5cd0 | 2721 | ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); |
92f8e767 SS |
2722 | if (!ctrl_ctx) { |
2723 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", | |
2724 | __func__); | |
ddba5cd0 MN |
2725 | ret = -ENOMEM; |
2726 | goto command_cleanup; | |
92f8e767 | 2727 | } |
28ccd296 ME |
2728 | ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); |
2729 | ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG); | |
2730 | ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG)); | |
2dc37539 SS |
2731 | |
2732 | /* Don't issue the command if there's no endpoints to update. */ | |
2733 | if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) && | |
ddba5cd0 MN |
2734 | ctrl_ctx->drop_flags == 0) { |
2735 | ret = 0; | |
2736 | goto command_cleanup; | |
2737 | } | |
d6759133 | 2738 | /* Fix up Context Entries field. Minimum value is EP0 == BIT(1). */ |
d115b048 | 2739 | slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); |
d6759133 JW |
2740 | for (i = 31; i >= 1; i--) { |
2741 | __le32 le32 = cpu_to_le32(BIT(i)); | |
2742 | ||
2743 | if ((virt_dev->eps[i-1].ring && !(ctrl_ctx->drop_flags & le32)) | |
2744 | || (ctrl_ctx->add_flags & le32) || i == 1) { | |
2745 | slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK); | |
2746 | slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(i)); | |
2747 | break; | |
2748 | } | |
2749 | } | |
2750 | xhci_dbg(xhci, "New Input Control Context:\n"); | |
d115b048 | 2751 | xhci_dbg_ctx(xhci, virt_dev->in_ctx, |
28ccd296 | 2752 | LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info))); |
f94e0186 | 2753 | |
ddba5cd0 | 2754 | ret = xhci_configure_endpoint(xhci, udev, command, |
913a8a34 | 2755 | false, false); |
ddba5cd0 | 2756 | if (ret) |
f94e0186 | 2757 | /* Callee should call reset_bandwidth() */ |
ddba5cd0 | 2758 | goto command_cleanup; |
f94e0186 SS |
2759 | |
2760 | xhci_dbg(xhci, "Output context after successful config ep cmd:\n"); | |
d115b048 | 2761 | xhci_dbg_ctx(xhci, virt_dev->out_ctx, |
28ccd296 | 2762 | LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info))); |
f94e0186 | 2763 | |
834cb0fc SS |
2764 | /* Free any rings that were dropped, but not changed. */ |
2765 | for (i = 1; i < 31; ++i) { | |
4819fef5 | 2766 | if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) && |
df613834 | 2767 | !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) { |
834cb0fc | 2768 | xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); |
df613834 HG |
2769 | xhci_check_bw_drop_ep_streams(xhci, virt_dev, i); |
2770 | } | |
834cb0fc | 2771 | } |
d115b048 | 2772 | xhci_zero_in_ctx(xhci, virt_dev); |
834cb0fc SS |
2773 | /* |
2774 | * Install any rings for completely new endpoints or changed endpoints, | |
2775 | * and free or cache any old rings from changed endpoints. | |
2776 | */ | |
f94e0186 | 2777 | for (i = 1; i < 31; ++i) { |
74f9fe21 SS |
2778 | if (!virt_dev->eps[i].new_ring) |
2779 | continue; | |
2780 | /* Only cache or free the old ring if it exists. | |
2781 | * It may not if this is the first add of an endpoint. | |
2782 | */ | |
2783 | if (virt_dev->eps[i].ring) { | |
412566bd | 2784 | xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); |
f94e0186 | 2785 | } |
df613834 | 2786 | xhci_check_bw_drop_ep_streams(xhci, virt_dev, i); |
74f9fe21 SS |
2787 | virt_dev->eps[i].ring = virt_dev->eps[i].new_ring; |
2788 | virt_dev->eps[i].new_ring = NULL; | |
f94e0186 | 2789 | } |
ddba5cd0 MN |
2790 | command_cleanup: |
2791 | kfree(command->completion); | |
2792 | kfree(command); | |
f94e0186 | 2793 | |
f94e0186 SS |
2794 | return ret; |
2795 | } | |
2796 | ||
2797 | void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) | |
2798 | { | |
f94e0186 SS |
2799 | struct xhci_hcd *xhci; |
2800 | struct xhci_virt_device *virt_dev; | |
2801 | int i, ret; | |
2802 | ||
64927730 | 2803 | ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__); |
f94e0186 SS |
2804 | if (ret <= 0) |
2805 | return; | |
2806 | xhci = hcd_to_xhci(hcd); | |
2807 | ||
700e2052 | 2808 | xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); |
f94e0186 SS |
2809 | virt_dev = xhci->devs[udev->slot_id]; |
2810 | /* Free any rings allocated for added endpoints */ | |
2811 | for (i = 0; i < 31; ++i) { | |
63a0d9ab SS |
2812 | if (virt_dev->eps[i].new_ring) { |
2813 | xhci_ring_free(xhci, virt_dev->eps[i].new_ring); | |
2814 | virt_dev->eps[i].new_ring = NULL; | |
f94e0186 SS |
2815 | } |
2816 | } | |
d115b048 | 2817 | xhci_zero_in_ctx(xhci, virt_dev); |
f94e0186 SS |
2818 | } |
2819 | ||
5270b951 | 2820 | static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci, |
913a8a34 SS |
2821 | struct xhci_container_ctx *in_ctx, |
2822 | struct xhci_container_ctx *out_ctx, | |
92f8e767 | 2823 | struct xhci_input_control_ctx *ctrl_ctx, |
913a8a34 | 2824 | u32 add_flags, u32 drop_flags) |
5270b951 | 2825 | { |
28ccd296 ME |
2826 | ctrl_ctx->add_flags = cpu_to_le32(add_flags); |
2827 | ctrl_ctx->drop_flags = cpu_to_le32(drop_flags); | |
913a8a34 | 2828 | xhci_slot_copy(xhci, in_ctx, out_ctx); |
28ccd296 | 2829 | ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); |
5270b951 | 2830 | |
913a8a34 SS |
2831 | xhci_dbg(xhci, "Input Context:\n"); |
2832 | xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags)); | |
5270b951 SS |
2833 | } |
2834 | ||
8212a49d | 2835 | static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, |
ac9d8fe7 SS |
2836 | unsigned int slot_id, unsigned int ep_index, |
2837 | struct xhci_dequeue_state *deq_state) | |
2838 | { | |
92f8e767 | 2839 | struct xhci_input_control_ctx *ctrl_ctx; |
ac9d8fe7 | 2840 | struct xhci_container_ctx *in_ctx; |
ac9d8fe7 SS |
2841 | struct xhci_ep_ctx *ep_ctx; |
2842 | u32 added_ctxs; | |
2843 | dma_addr_t addr; | |
2844 | ||
92f8e767 SS |
2845 | in_ctx = xhci->devs[slot_id]->in_ctx; |
2846 | ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); | |
2847 | if (!ctrl_ctx) { | |
2848 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", | |
2849 | __func__); | |
2850 | return; | |
2851 | } | |
2852 | ||
913a8a34 SS |
2853 | xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx, |
2854 | xhci->devs[slot_id]->out_ctx, ep_index); | |
ac9d8fe7 SS |
2855 | ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); |
2856 | addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg, | |
2857 | deq_state->new_deq_ptr); | |
2858 | if (addr == 0) { | |
2859 | xhci_warn(xhci, "WARN Cannot submit config ep after " | |
2860 | "reset ep command\n"); | |
2861 | xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n", | |
2862 | deq_state->new_deq_seg, | |
2863 | deq_state->new_deq_ptr); | |
2864 | return; | |
2865 | } | |
28ccd296 | 2866 | ep_ctx->deq = cpu_to_le64(addr | deq_state->new_cycle_state); |
ac9d8fe7 | 2867 | |
ac9d8fe7 | 2868 | added_ctxs = xhci_get_endpoint_flag_from_index(ep_index); |
913a8a34 | 2869 | xhci_setup_input_ctx_for_config_ep(xhci, xhci->devs[slot_id]->in_ctx, |
92f8e767 SS |
2870 | xhci->devs[slot_id]->out_ctx, ctrl_ctx, |
2871 | added_ctxs, added_ctxs); | |
ac9d8fe7 SS |
2872 | } |
2873 | ||
82d1009f | 2874 | void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, |
63a0d9ab | 2875 | struct usb_device *udev, unsigned int ep_index) |
82d1009f SS |
2876 | { |
2877 | struct xhci_dequeue_state deq_state; | |
63a0d9ab | 2878 | struct xhci_virt_ep *ep; |
82d1009f | 2879 | |
a0254324 XR |
2880 | xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, |
2881 | "Cleaning up stalled endpoint ring"); | |
63a0d9ab | 2882 | ep = &xhci->devs[udev->slot_id]->eps[ep_index]; |
82d1009f SS |
2883 | /* We need to move the HW's dequeue pointer past this TD, |
2884 | * or it will attempt to resend it on the next doorbell ring. | |
2885 | */ | |
2886 | xhci_find_new_dequeue_state(xhci, udev->slot_id, | |
e9df17eb | 2887 | ep_index, ep->stopped_stream, ep->stopped_td, |
ac9d8fe7 | 2888 | &deq_state); |
82d1009f | 2889 | |
365038d8 MN |
2890 | if (!deq_state.new_deq_ptr || !deq_state.new_deq_seg) |
2891 | return; | |
2892 | ||
ac9d8fe7 SS |
2893 | /* HW with the reset endpoint quirk will use the saved dequeue state to |
2894 | * issue a configure endpoint command later. | |
2895 | */ | |
2896 | if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) { | |
a0254324 XR |
2897 | xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, |
2898 | "Queueing new dequeue state"); | |
1e3452e3 | 2899 | xhci_queue_new_dequeue_state(xhci, udev->slot_id, |
e9df17eb | 2900 | ep_index, ep->stopped_stream, &deq_state); |
ac9d8fe7 SS |
2901 | } else { |
2902 | /* Better hope no one uses the input context between now and the | |
2903 | * reset endpoint completion! | |
e9df17eb SS |
2904 | * XXX: No idea how this hardware will react when stream rings |
2905 | * are enabled. | |
ac9d8fe7 | 2906 | */ |
4bdfe4c3 XR |
2907 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
2908 | "Setting up input context for " | |
2909 | "configure endpoint command"); | |
ac9d8fe7 SS |
2910 | xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id, |
2911 | ep_index, &deq_state); | |
2912 | } | |
82d1009f SS |
2913 | } |
2914 | ||
a1587d97 SS |
2915 | /* Deal with stalled endpoints. The core should have sent the control message |
2916 | * to clear the halt condition. However, we need to make the xHCI hardware | |
2917 | * reset its sequence number, since a device will expect a sequence number of | |
2918 | * zero after the halt condition is cleared. | |
2919 | * Context: in_interrupt | |
2920 | */ | |
2921 | void xhci_endpoint_reset(struct usb_hcd *hcd, | |
2922 | struct usb_host_endpoint *ep) | |
2923 | { | |
2924 | struct xhci_hcd *xhci; | |
2925 | struct usb_device *udev; | |
2926 | unsigned int ep_index; | |
2927 | unsigned long flags; | |
2928 | int ret; | |
63a0d9ab | 2929 | struct xhci_virt_ep *virt_ep; |
ddba5cd0 | 2930 | struct xhci_command *command; |
a1587d97 SS |
2931 | |
2932 | xhci = hcd_to_xhci(hcd); | |
2933 | udev = (struct usb_device *) ep->hcpriv; | |
2934 | /* Called with a root hub endpoint (or an endpoint that wasn't added | |
2935 | * with xhci_add_endpoint() | |
2936 | */ | |
2937 | if (!ep->hcpriv) | |
2938 | return; | |
2939 | ep_index = xhci_get_endpoint_index(&ep->desc); | |
63a0d9ab SS |
2940 | virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index]; |
2941 | if (!virt_ep->stopped_td) { | |
a0254324 XR |
2942 | xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, |
2943 | "Endpoint 0x%x not halted, refusing to reset.", | |
2944 | ep->desc.bEndpointAddress); | |
c92bcfa7 SS |
2945 | return; |
2946 | } | |
82d1009f | 2947 | if (usb_endpoint_xfer_control(&ep->desc)) { |
a0254324 XR |
2948 | xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, |
2949 | "Control endpoint stall already handled."); | |
82d1009f SS |
2950 | return; |
2951 | } | |
a1587d97 | 2952 | |
ddba5cd0 MN |
2953 | command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); |
2954 | if (!command) | |
2955 | return; | |
2956 | ||
a0254324 XR |
2957 | xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, |
2958 | "Queueing reset endpoint command"); | |
a1587d97 | 2959 | spin_lock_irqsave(&xhci->lock, flags); |
ddba5cd0 | 2960 | ret = xhci_queue_reset_ep(xhci, command, udev->slot_id, ep_index); |
c92bcfa7 SS |
2961 | /* |
2962 | * Can't change the ring dequeue pointer until it's transitioned to the | |
2963 | * stopped state, which is only upon a successful reset endpoint | |
2964 | * command. Better hope that last command worked! | |
2965 | */ | |
a1587d97 | 2966 | if (!ret) { |
63a0d9ab SS |
2967 | xhci_cleanup_stalled_ring(xhci, udev, ep_index); |
2968 | kfree(virt_ep->stopped_td); | |
a1587d97 SS |
2969 | xhci_ring_cmd_db(xhci); |
2970 | } | |
1624ae1c | 2971 | virt_ep->stopped_td = NULL; |
5e5cf6fc | 2972 | virt_ep->stopped_stream = 0; |
a1587d97 SS |
2973 | spin_unlock_irqrestore(&xhci->lock, flags); |
2974 | ||
2975 | if (ret) | |
2976 | xhci_warn(xhci, "FIXME allocate a new ring segment\n"); | |
2977 | } | |
2978 | ||
8df75f42 SS |
2979 | static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, |
2980 | struct usb_device *udev, struct usb_host_endpoint *ep, | |
2981 | unsigned int slot_id) | |
2982 | { | |
2983 | int ret; | |
2984 | unsigned int ep_index; | |
2985 | unsigned int ep_state; | |
2986 | ||
2987 | if (!ep) | |
2988 | return -EINVAL; | |
64927730 | 2989 | ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__); |
8df75f42 SS |
2990 | if (ret <= 0) |
2991 | return -EINVAL; | |
a3901538 | 2992 | if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) { |
8df75f42 SS |
2993 | xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion" |
2994 | " descriptor for ep 0x%x does not support streams\n", | |
2995 | ep->desc.bEndpointAddress); | |
2996 | return -EINVAL; | |
2997 | } | |
2998 | ||
2999 | ep_index = xhci_get_endpoint_index(&ep->desc); | |
3000 | ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state; | |
3001 | if (ep_state & EP_HAS_STREAMS || | |
3002 | ep_state & EP_GETTING_STREAMS) { | |
3003 | xhci_warn(xhci, "WARN: SuperSpeed bulk endpoint 0x%x " | |
3004 | "already has streams set up.\n", | |
3005 | ep->desc.bEndpointAddress); | |
3006 | xhci_warn(xhci, "Send email to xHCI maintainer and ask for " | |
3007 | "dynamic stream context array reallocation.\n"); | |
3008 | return -EINVAL; | |
3009 | } | |
3010 | if (!list_empty(&xhci->devs[slot_id]->eps[ep_index].ring->td_list)) { | |
3011 | xhci_warn(xhci, "Cannot setup streams for SuperSpeed bulk " | |
3012 | "endpoint 0x%x; URBs are pending.\n", | |
3013 | ep->desc.bEndpointAddress); | |
3014 | return -EINVAL; | |
3015 | } | |
3016 | return 0; | |
3017 | } | |
3018 | ||
3019 | static void xhci_calculate_streams_entries(struct xhci_hcd *xhci, | |
3020 | unsigned int *num_streams, unsigned int *num_stream_ctxs) | |
3021 | { | |
3022 | unsigned int max_streams; | |
3023 | ||
3024 | /* The stream context array size must be a power of two */ | |
3025 | *num_stream_ctxs = roundup_pow_of_two(*num_streams); | |
3026 | /* | |
3027 | * Find out how many primary stream array entries the host controller | |
3028 | * supports. Later we may use secondary stream arrays (similar to 2nd | |
3029 | * level page entries), but that's an optional feature for xHCI host | |
3030 | * controllers. xHCs must support at least 4 stream IDs. | |
3031 | */ | |
3032 | max_streams = HCC_MAX_PSA(xhci->hcc_params); | |
3033 | if (*num_stream_ctxs > max_streams) { | |
3034 | xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n", | |
3035 | max_streams); | |
3036 | *num_stream_ctxs = max_streams; | |
3037 | *num_streams = max_streams; | |
3038 | } | |
3039 | } | |
3040 | ||
3041 | /* Returns an error code if one of the endpoint already has streams. | |
3042 | * This does not change any data structures, it only checks and gathers | |
3043 | * information. | |
3044 | */ | |
3045 | static int xhci_calculate_streams_and_bitmask(struct xhci_hcd *xhci, | |
3046 | struct usb_device *udev, | |
3047 | struct usb_host_endpoint **eps, unsigned int num_eps, | |
3048 | unsigned int *num_streams, u32 *changed_ep_bitmask) | |
3049 | { | |
8df75f42 SS |
3050 | unsigned int max_streams; |
3051 | unsigned int endpoint_flag; | |
3052 | int i; | |
3053 | int ret; | |
3054 | ||
3055 | for (i = 0; i < num_eps; i++) { | |
3056 | ret = xhci_check_streams_endpoint(xhci, udev, | |
3057 | eps[i], udev->slot_id); | |
3058 | if (ret < 0) | |
3059 | return ret; | |
3060 | ||
18b7ede5 | 3061 | max_streams = usb_ss_max_streams(&eps[i]->ss_ep_comp); |
8df75f42 SS |
3062 | if (max_streams < (*num_streams - 1)) { |
3063 | xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n", | |
3064 | eps[i]->desc.bEndpointAddress, | |
3065 | max_streams); | |
3066 | *num_streams = max_streams+1; | |
3067 | } | |
3068 | ||
3069 | endpoint_flag = xhci_get_endpoint_flag(&eps[i]->desc); | |
3070 | if (*changed_ep_bitmask & endpoint_flag) | |
3071 | return -EINVAL; | |
3072 | *changed_ep_bitmask |= endpoint_flag; | |
3073 | } | |
3074 | return 0; | |
3075 | } | |
3076 | ||
3077 | static u32 xhci_calculate_no_streams_bitmask(struct xhci_hcd *xhci, | |
3078 | struct usb_device *udev, | |
3079 | struct usb_host_endpoint **eps, unsigned int num_eps) | |
3080 | { | |
3081 | u32 changed_ep_bitmask = 0; | |
3082 | unsigned int slot_id; | |
3083 | unsigned int ep_index; | |
3084 | unsigned int ep_state; | |
3085 | int i; | |
3086 | ||
3087 | slot_id = udev->slot_id; | |
3088 | if (!xhci->devs[slot_id]) | |
3089 | return 0; | |
3090 | ||
3091 | for (i = 0; i < num_eps; i++) { | |
3092 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); | |
3093 | ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state; | |
3094 | /* Are streams already being freed for the endpoint? */ | |
3095 | if (ep_state & EP_GETTING_NO_STREAMS) { | |
3096 | xhci_warn(xhci, "WARN Can't disable streams for " | |
03e64e96 JP |
3097 | "endpoint 0x%x, " |
3098 | "streams are being disabled already\n", | |
8df75f42 SS |
3099 | eps[i]->desc.bEndpointAddress); |
3100 | return 0; | |
3101 | } | |
3102 | /* Are there actually any streams to free? */ | |
3103 | if (!(ep_state & EP_HAS_STREAMS) && | |
3104 | !(ep_state & EP_GETTING_STREAMS)) { | |
3105 | xhci_warn(xhci, "WARN Can't disable streams for " | |
03e64e96 JP |
3106 | "endpoint 0x%x, " |
3107 | "streams are already disabled!\n", | |
8df75f42 SS |
3108 | eps[i]->desc.bEndpointAddress); |
3109 | xhci_warn(xhci, "WARN xhci_free_streams() called " | |
3110 | "with non-streams endpoint\n"); | |
3111 | return 0; | |
3112 | } | |
3113 | changed_ep_bitmask |= xhci_get_endpoint_flag(&eps[i]->desc); | |
3114 | } | |
3115 | return changed_ep_bitmask; | |
3116 | } | |
3117 | ||
3118 | /* | |
3119 | * The USB device drivers use this function (though the HCD interface in USB | |
3120 | * core) to prepare a set of bulk endpoints to use streams. Streams are used to | |
3121 | * coordinate mass storage command queueing across multiple endpoints (basically | |
3122 | * a stream ID == a task ID). | |
3123 | * | |
3124 | * Setting up streams involves allocating the same size stream context array | |
3125 | * for each endpoint and issuing a configure endpoint command for all endpoints. | |
3126 | * | |
3127 | * Don't allow the call to succeed if one endpoint only supports one stream | |
3128 | * (which means it doesn't support streams at all). | |
3129 | * | |
3130 | * Drivers may get less stream IDs than they asked for, if the host controller | |
3131 | * hardware or endpoints claim they can't support the number of requested | |
3132 | * stream IDs. | |
3133 | */ | |
3134 | int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, | |
3135 | struct usb_host_endpoint **eps, unsigned int num_eps, | |
3136 | unsigned int num_streams, gfp_t mem_flags) | |
3137 | { | |
3138 | int i, ret; | |
3139 | struct xhci_hcd *xhci; | |
3140 | struct xhci_virt_device *vdev; | |
3141 | struct xhci_command *config_cmd; | |
92f8e767 | 3142 | struct xhci_input_control_ctx *ctrl_ctx; |
8df75f42 SS |
3143 | unsigned int ep_index; |
3144 | unsigned int num_stream_ctxs; | |
3145 | unsigned long flags; | |
3146 | u32 changed_ep_bitmask = 0; | |
3147 | ||
3148 | if (!eps) | |
3149 | return -EINVAL; | |
3150 | ||
3151 | /* Add one to the number of streams requested to account for | |
3152 | * stream 0 that is reserved for xHCI usage. | |
3153 | */ | |
3154 | num_streams += 1; | |
3155 | xhci = hcd_to_xhci(hcd); | |
3156 | xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n", | |
3157 | num_streams); | |
3158 | ||
f7920884 | 3159 | /* MaxPSASize value 0 (2 streams) means streams are not supported */ |
8f873c1f HG |
3160 | if ((xhci->quirks & XHCI_BROKEN_STREAMS) || |
3161 | HCC_MAX_PSA(xhci->hcc_params) < 4) { | |
f7920884 HG |
3162 | xhci_dbg(xhci, "xHCI controller does not support streams.\n"); |
3163 | return -ENOSYS; | |
3164 | } | |
3165 | ||
8df75f42 SS |
3166 | config_cmd = xhci_alloc_command(xhci, true, true, mem_flags); |
3167 | if (!config_cmd) { | |
3168 | xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); | |
3169 | return -ENOMEM; | |
3170 | } | |
92f8e767 SS |
3171 | ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx); |
3172 | if (!ctrl_ctx) { | |
3173 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", | |
3174 | __func__); | |
3175 | xhci_free_command(xhci, config_cmd); | |
3176 | return -ENOMEM; | |
3177 | } | |
8df75f42 SS |
3178 | |
3179 | /* Check to make sure all endpoints are not already configured for | |
3180 | * streams. While we're at it, find the maximum number of streams that | |
3181 | * all the endpoints will support and check for duplicate endpoints. | |
3182 | */ | |
3183 | spin_lock_irqsave(&xhci->lock, flags); | |
3184 | ret = xhci_calculate_streams_and_bitmask(xhci, udev, eps, | |
3185 | num_eps, &num_streams, &changed_ep_bitmask); | |
3186 | if (ret < 0) { | |
3187 | xhci_free_command(xhci, config_cmd); | |
3188 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3189 | return ret; | |
3190 | } | |
3191 | if (num_streams <= 1) { | |
3192 | xhci_warn(xhci, "WARN: endpoints can't handle " | |
3193 | "more than one stream.\n"); | |
3194 | xhci_free_command(xhci, config_cmd); | |
3195 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3196 | return -EINVAL; | |
3197 | } | |
3198 | vdev = xhci->devs[udev->slot_id]; | |
25985edc | 3199 | /* Mark each endpoint as being in transition, so |
8df75f42 SS |
3200 | * xhci_urb_enqueue() will reject all URBs. |
3201 | */ | |
3202 | for (i = 0; i < num_eps; i++) { | |
3203 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); | |
3204 | vdev->eps[ep_index].ep_state |= EP_GETTING_STREAMS; | |
3205 | } | |
3206 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3207 | ||
3208 | /* Setup internal data structures and allocate HW data structures for | |
3209 | * streams (but don't install the HW structures in the input context | |
3210 | * until we're sure all memory allocation succeeded). | |
3211 | */ | |
3212 | xhci_calculate_streams_entries(xhci, &num_streams, &num_stream_ctxs); | |
3213 | xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n", | |
3214 | num_stream_ctxs, num_streams); | |
3215 | ||
3216 | for (i = 0; i < num_eps; i++) { | |
3217 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); | |
3218 | vdev->eps[ep_index].stream_info = xhci_alloc_stream_info(xhci, | |
3219 | num_stream_ctxs, | |
3220 | num_streams, mem_flags); | |
3221 | if (!vdev->eps[ep_index].stream_info) | |
3222 | goto cleanup; | |
3223 | /* Set maxPstreams in endpoint context and update deq ptr to | |
3224 | * point to stream context array. FIXME | |
3225 | */ | |
3226 | } | |
3227 | ||
3228 | /* Set up the input context for a configure endpoint command. */ | |
3229 | for (i = 0; i < num_eps; i++) { | |
3230 | struct xhci_ep_ctx *ep_ctx; | |
3231 | ||
3232 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); | |
3233 | ep_ctx = xhci_get_ep_ctx(xhci, config_cmd->in_ctx, ep_index); | |
3234 | ||
3235 | xhci_endpoint_copy(xhci, config_cmd->in_ctx, | |
3236 | vdev->out_ctx, ep_index); | |
3237 | xhci_setup_streams_ep_input_ctx(xhci, ep_ctx, | |
3238 | vdev->eps[ep_index].stream_info); | |
3239 | } | |
3240 | /* Tell the HW to drop its old copy of the endpoint context info | |
3241 | * and add the updated copy from the input context. | |
3242 | */ | |
3243 | xhci_setup_input_ctx_for_config_ep(xhci, config_cmd->in_ctx, | |
92f8e767 SS |
3244 | vdev->out_ctx, ctrl_ctx, |
3245 | changed_ep_bitmask, changed_ep_bitmask); | |
8df75f42 SS |
3246 | |
3247 | /* Issue and wait for the configure endpoint command */ | |
3248 | ret = xhci_configure_endpoint(xhci, udev, config_cmd, | |
3249 | false, false); | |
3250 | ||
3251 | /* xHC rejected the configure endpoint command for some reason, so we | |
3252 | * leave the old ring intact and free our internal streams data | |
3253 | * structure. | |
3254 | */ | |
3255 | if (ret < 0) | |
3256 | goto cleanup; | |
3257 | ||
3258 | spin_lock_irqsave(&xhci->lock, flags); | |
3259 | for (i = 0; i < num_eps; i++) { | |
3260 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); | |
3261 | vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS; | |
3262 | xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n", | |
3263 | udev->slot_id, ep_index); | |
3264 | vdev->eps[ep_index].ep_state |= EP_HAS_STREAMS; | |
3265 | } | |
3266 | xhci_free_command(xhci, config_cmd); | |
3267 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3268 | ||
3269 | /* Subtract 1 for stream 0, which drivers can't use */ | |
3270 | return num_streams - 1; | |
3271 | ||
3272 | cleanup: | |
3273 | /* If it didn't work, free the streams! */ | |
3274 | for (i = 0; i < num_eps; i++) { | |
3275 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); | |
3276 | xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info); | |
8a007748 | 3277 | vdev->eps[ep_index].stream_info = NULL; |
8df75f42 SS |
3278 | /* FIXME Unset maxPstreams in endpoint context and |
3279 | * update deq ptr to point to normal string ring. | |
3280 | */ | |
3281 | vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS; | |
3282 | vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS; | |
3283 | xhci_endpoint_zero(xhci, vdev, eps[i]); | |
3284 | } | |
3285 | xhci_free_command(xhci, config_cmd); | |
3286 | return -ENOMEM; | |
3287 | } | |
3288 | ||
3289 | /* Transition the endpoint from using streams to being a "normal" endpoint | |
3290 | * without streams. | |
3291 | * | |
3292 | * Modify the endpoint context state, submit a configure endpoint command, | |
3293 | * and free all endpoint rings for streams if that completes successfully. | |
3294 | */ | |
3295 | int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, | |
3296 | struct usb_host_endpoint **eps, unsigned int num_eps, | |
3297 | gfp_t mem_flags) | |
3298 | { | |
3299 | int i, ret; | |
3300 | struct xhci_hcd *xhci; | |
3301 | struct xhci_virt_device *vdev; | |
3302 | struct xhci_command *command; | |
92f8e767 | 3303 | struct xhci_input_control_ctx *ctrl_ctx; |
8df75f42 SS |
3304 | unsigned int ep_index; |
3305 | unsigned long flags; | |
3306 | u32 changed_ep_bitmask; | |
3307 | ||
3308 | xhci = hcd_to_xhci(hcd); | |
3309 | vdev = xhci->devs[udev->slot_id]; | |
3310 | ||
3311 | /* Set up a configure endpoint command to remove the streams rings */ | |
3312 | spin_lock_irqsave(&xhci->lock, flags); | |
3313 | changed_ep_bitmask = xhci_calculate_no_streams_bitmask(xhci, | |
3314 | udev, eps, num_eps); | |
3315 | if (changed_ep_bitmask == 0) { | |
3316 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3317 | return -EINVAL; | |
3318 | } | |
3319 | ||
3320 | /* Use the xhci_command structure from the first endpoint. We may have | |
3321 | * allocated too many, but the driver may call xhci_free_streams() for | |
3322 | * each endpoint it grouped into one call to xhci_alloc_streams(). | |
3323 | */ | |
3324 | ep_index = xhci_get_endpoint_index(&eps[0]->desc); | |
3325 | command = vdev->eps[ep_index].stream_info->free_streams_command; | |
92f8e767 SS |
3326 | ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); |
3327 | if (!ctrl_ctx) { | |
1f21569c | 3328 | spin_unlock_irqrestore(&xhci->lock, flags); |
92f8e767 SS |
3329 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", |
3330 | __func__); | |
3331 | return -EINVAL; | |
3332 | } | |
3333 | ||
8df75f42 SS |
3334 | for (i = 0; i < num_eps; i++) { |
3335 | struct xhci_ep_ctx *ep_ctx; | |
3336 | ||
3337 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); | |
3338 | ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index); | |
3339 | xhci->devs[udev->slot_id]->eps[ep_index].ep_state |= | |
3340 | EP_GETTING_NO_STREAMS; | |
3341 | ||
3342 | xhci_endpoint_copy(xhci, command->in_ctx, | |
3343 | vdev->out_ctx, ep_index); | |
3344 | xhci_setup_no_streams_ep_input_ctx(xhci, ep_ctx, | |
3345 | &vdev->eps[ep_index]); | |
3346 | } | |
3347 | xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx, | |
92f8e767 SS |
3348 | vdev->out_ctx, ctrl_ctx, |
3349 | changed_ep_bitmask, changed_ep_bitmask); | |
8df75f42 SS |
3350 | spin_unlock_irqrestore(&xhci->lock, flags); |
3351 | ||
3352 | /* Issue and wait for the configure endpoint command, | |
3353 | * which must succeed. | |
3354 | */ | |
3355 | ret = xhci_configure_endpoint(xhci, udev, command, | |
3356 | false, true); | |
3357 | ||
3358 | /* xHC rejected the configure endpoint command for some reason, so we | |
3359 | * leave the streams rings intact. | |
3360 | */ | |
3361 | if (ret < 0) | |
3362 | return ret; | |
3363 | ||
3364 | spin_lock_irqsave(&xhci->lock, flags); | |
3365 | for (i = 0; i < num_eps; i++) { | |
3366 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); | |
3367 | xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info); | |
8a007748 | 3368 | vdev->eps[ep_index].stream_info = NULL; |
8df75f42 SS |
3369 | /* FIXME Unset maxPstreams in endpoint context and |
3370 | * update deq ptr to point to normal string ring. | |
3371 | */ | |
3372 | vdev->eps[ep_index].ep_state &= ~EP_GETTING_NO_STREAMS; | |
3373 | vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS; | |
3374 | } | |
3375 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3376 | ||
3377 | return 0; | |
3378 | } | |
3379 | ||
2cf95c18 SS |
3380 | /* |
3381 | * Deletes endpoint resources for endpoints that were active before a Reset | |
3382 | * Device command, or a Disable Slot command. The Reset Device command leaves | |
3383 | * the control endpoint intact, whereas the Disable Slot command deletes it. | |
3384 | * | |
3385 | * Must be called with xhci->lock held. | |
3386 | */ | |
3387 | void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, | |
3388 | struct xhci_virt_device *virt_dev, bool drop_control_ep) | |
3389 | { | |
3390 | int i; | |
3391 | unsigned int num_dropped_eps = 0; | |
3392 | unsigned int drop_flags = 0; | |
3393 | ||
3394 | for (i = (drop_control_ep ? 0 : 1); i < 31; i++) { | |
3395 | if (virt_dev->eps[i].ring) { | |
3396 | drop_flags |= 1 << i; | |
3397 | num_dropped_eps++; | |
3398 | } | |
3399 | } | |
3400 | xhci->num_active_eps -= num_dropped_eps; | |
3401 | if (num_dropped_eps) | |
4bdfe4c3 XR |
3402 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
3403 | "Dropped %u ep ctxs, flags = 0x%x, " | |
3404 | "%u now active.", | |
2cf95c18 SS |
3405 | num_dropped_eps, drop_flags, |
3406 | xhci->num_active_eps); | |
3407 | } | |
3408 | ||
2a8f82c4 SS |
3409 | /* |
3410 | * This submits a Reset Device Command, which will set the device state to 0, | |
3411 | * set the device address to 0, and disable all the endpoints except the default | |
3412 | * control endpoint. The USB core should come back and call | |
3413 | * xhci_address_device(), and then re-set up the configuration. If this is | |
3414 | * called because of a usb_reset_and_verify_device(), then the old alternate | |
3415 | * settings will be re-installed through the normal bandwidth allocation | |
3416 | * functions. | |
3417 | * | |
3418 | * Wait for the Reset Device command to finish. Remove all structures | |
3419 | * associated with the endpoints that were disabled. Clear the input device | |
3420 | * structure? Cache the rings? Reset the control endpoint 0 max packet size? | |
f0615c45 AX |
3421 | * |
3422 | * If the virt_dev to be reset does not exist or does not match the udev, | |
3423 | * it means the device is lost, possibly due to the xHC restore error and | |
3424 | * re-initialization during S3/S4. In this case, call xhci_alloc_dev() to | |
3425 | * re-allocate the device. | |
2a8f82c4 | 3426 | */ |
f0615c45 | 3427 | int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) |
2a8f82c4 SS |
3428 | { |
3429 | int ret, i; | |
3430 | unsigned long flags; | |
3431 | struct xhci_hcd *xhci; | |
3432 | unsigned int slot_id; | |
3433 | struct xhci_virt_device *virt_dev; | |
3434 | struct xhci_command *reset_device_cmd; | |
2a8f82c4 | 3435 | int last_freed_endpoint; |
001fd382 | 3436 | struct xhci_slot_ctx *slot_ctx; |
2e27980e | 3437 | int old_active_eps = 0; |
2a8f82c4 | 3438 | |
f0615c45 | 3439 | ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__); |
2a8f82c4 SS |
3440 | if (ret <= 0) |
3441 | return ret; | |
3442 | xhci = hcd_to_xhci(hcd); | |
3443 | slot_id = udev->slot_id; | |
3444 | virt_dev = xhci->devs[slot_id]; | |
f0615c45 AX |
3445 | if (!virt_dev) { |
3446 | xhci_dbg(xhci, "The device to be reset with slot ID %u does " | |
3447 | "not exist. Re-allocate the device\n", slot_id); | |
3448 | ret = xhci_alloc_dev(hcd, udev); | |
3449 | if (ret == 1) | |
3450 | return 0; | |
3451 | else | |
3452 | return -EINVAL; | |
3453 | } | |
3454 | ||
3455 | if (virt_dev->udev != udev) { | |
3456 | /* If the virt_dev and the udev does not match, this virt_dev | |
3457 | * may belong to another udev. | |
3458 | * Re-allocate the device. | |
3459 | */ | |
3460 | xhci_dbg(xhci, "The device to be reset with slot ID %u does " | |
3461 | "not match the udev. Re-allocate the device\n", | |
3462 | slot_id); | |
3463 | ret = xhci_alloc_dev(hcd, udev); | |
3464 | if (ret == 1) | |
3465 | return 0; | |
3466 | else | |
3467 | return -EINVAL; | |
3468 | } | |
2a8f82c4 | 3469 | |
001fd382 ML |
3470 | /* If device is not setup, there is no point in resetting it */ |
3471 | slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); | |
3472 | if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) == | |
3473 | SLOT_STATE_DISABLED) | |
3474 | return 0; | |
3475 | ||
2a8f82c4 SS |
3476 | xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); |
3477 | /* Allocate the command structure that holds the struct completion. | |
3478 | * Assume we're in process context, since the normal device reset | |
3479 | * process has to wait for the device anyway. Storage devices are | |
3480 | * reset as part of error handling, so use GFP_NOIO instead of | |
3481 | * GFP_KERNEL. | |
3482 | */ | |
3483 | reset_device_cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO); | |
3484 | if (!reset_device_cmd) { | |
3485 | xhci_dbg(xhci, "Couldn't allocate command structure.\n"); | |
3486 | return -ENOMEM; | |
3487 | } | |
3488 | ||
3489 | /* Attempt to submit the Reset Device command to the command ring */ | |
3490 | spin_lock_irqsave(&xhci->lock, flags); | |
7a3783ef | 3491 | |
ddba5cd0 | 3492 | ret = xhci_queue_reset_device(xhci, reset_device_cmd, slot_id); |
2a8f82c4 SS |
3493 | if (ret) { |
3494 | xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); | |
2a8f82c4 SS |
3495 | spin_unlock_irqrestore(&xhci->lock, flags); |
3496 | goto command_cleanup; | |
3497 | } | |
3498 | xhci_ring_cmd_db(xhci); | |
3499 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3500 | ||
3501 | /* Wait for the Reset Device command to finish */ | |
c311e391 | 3502 | wait_for_completion(reset_device_cmd->completion); |
2a8f82c4 SS |
3503 | |
3504 | /* The Reset Device command can't fail, according to the 0.95/0.96 spec, | |
3505 | * unless we tried to reset a slot ID that wasn't enabled, | |
3506 | * or the device wasn't in the addressed or configured state. | |
3507 | */ | |
3508 | ret = reset_device_cmd->status; | |
3509 | switch (ret) { | |
c311e391 MN |
3510 | case COMP_CMD_ABORT: |
3511 | case COMP_CMD_STOP: | |
3512 | xhci_warn(xhci, "Timeout waiting for reset device command\n"); | |
3513 | ret = -ETIME; | |
3514 | goto command_cleanup; | |
2a8f82c4 SS |
3515 | case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */ |
3516 | case COMP_CTX_STATE: /* 0.96 completion code for same thing */ | |
38a532a6 | 3517 | xhci_dbg(xhci, "Can't reset device (slot ID %u) in %s state\n", |
2a8f82c4 SS |
3518 | slot_id, |
3519 | xhci_get_slot_state(xhci, virt_dev->out_ctx)); | |
38a532a6 | 3520 | xhci_dbg(xhci, "Not freeing device rings.\n"); |
2a8f82c4 SS |
3521 | /* Don't treat this as an error. May change my mind later. */ |
3522 | ret = 0; | |
3523 | goto command_cleanup; | |
3524 | case COMP_SUCCESS: | |
3525 | xhci_dbg(xhci, "Successful reset device command.\n"); | |
3526 | break; | |
3527 | default: | |
3528 | if (xhci_is_vendor_info_code(xhci, ret)) | |
3529 | break; | |
3530 | xhci_warn(xhci, "Unknown completion code %u for " | |
3531 | "reset device command.\n", ret); | |
3532 | ret = -EINVAL; | |
3533 | goto command_cleanup; | |
3534 | } | |
3535 | ||
2cf95c18 SS |
3536 | /* Free up host controller endpoint resources */ |
3537 | if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) { | |
3538 | spin_lock_irqsave(&xhci->lock, flags); | |
3539 | /* Don't delete the default control endpoint resources */ | |
3540 | xhci_free_device_endpoint_resources(xhci, virt_dev, false); | |
3541 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3542 | } | |
3543 | ||
2a8f82c4 SS |
3544 | /* Everything but endpoint 0 is disabled, so free or cache the rings. */ |
3545 | last_freed_endpoint = 1; | |
3546 | for (i = 1; i < 31; ++i) { | |
2dea75d9 DT |
3547 | struct xhci_virt_ep *ep = &virt_dev->eps[i]; |
3548 | ||
3549 | if (ep->ep_state & EP_HAS_STREAMS) { | |
df613834 HG |
3550 | xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on device reset, freeing streams.\n", |
3551 | xhci_get_endpoint_address(i)); | |
2dea75d9 DT |
3552 | xhci_free_stream_info(xhci, ep->stream_info); |
3553 | ep->stream_info = NULL; | |
3554 | ep->ep_state &= ~EP_HAS_STREAMS; | |
3555 | } | |
3556 | ||
3557 | if (ep->ring) { | |
3558 | xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); | |
3559 | last_freed_endpoint = i; | |
3560 | } | |
2e27980e SS |
3561 | if (!list_empty(&virt_dev->eps[i].bw_endpoint_list)) |
3562 | xhci_drop_ep_from_interval_table(xhci, | |
3563 | &virt_dev->eps[i].bw_info, | |
3564 | virt_dev->bw_table, | |
3565 | udev, | |
3566 | &virt_dev->eps[i], | |
3567 | virt_dev->tt_info); | |
9af5d71d | 3568 | xhci_clear_endpoint_bw_info(&virt_dev->eps[i].bw_info); |
2a8f82c4 | 3569 | } |
2e27980e SS |
3570 | /* If necessary, update the number of active TTs on this root port */ |
3571 | xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps); | |
3572 | ||
2a8f82c4 SS |
3573 | xhci_dbg(xhci, "Output context after successful reset device cmd:\n"); |
3574 | xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint); | |
3575 | ret = 0; | |
3576 | ||
3577 | command_cleanup: | |
3578 | xhci_free_command(xhci, reset_device_cmd); | |
3579 | return ret; | |
3580 | } | |
3581 | ||
3ffbba95 SS |
3582 | /* |
3583 | * At this point, the struct usb_device is about to go away, the device has | |
3584 | * disconnected, and all traffic has been stopped and the endpoints have been | |
3585 | * disabled. Free any HC data structures associated with that device. | |
3586 | */ | |
3587 | void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) | |
3588 | { | |
3589 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
6f5165cf | 3590 | struct xhci_virt_device *virt_dev; |
3ffbba95 | 3591 | unsigned long flags; |
c526d0d4 | 3592 | u32 state; |
64927730 | 3593 | int i, ret; |
ddba5cd0 MN |
3594 | struct xhci_command *command; |
3595 | ||
3596 | command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); | |
3597 | if (!command) | |
3598 | return; | |
3ffbba95 | 3599 | |
c8476fb8 SN |
3600 | #ifndef CONFIG_USB_DEFAULT_PERSIST |
3601 | /* | |
3602 | * We called pm_runtime_get_noresume when the device was attached. | |
3603 | * Decrement the counter here to allow controller to runtime suspend | |
3604 | * if no devices remain. | |
3605 | */ | |
3606 | if (xhci->quirks & XHCI_RESET_ON_RESUME) | |
e7ecf069 | 3607 | pm_runtime_put_noidle(hcd->self.controller); |
c8476fb8 SN |
3608 | #endif |
3609 | ||
64927730 | 3610 | ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__); |
7bd89b40 SS |
3611 | /* If the host is halted due to driver unload, we still need to free the |
3612 | * device. | |
3613 | */ | |
ddba5cd0 MN |
3614 | if (ret <= 0 && ret != -ENODEV) { |
3615 | kfree(command); | |
3ffbba95 | 3616 | return; |
ddba5cd0 | 3617 | } |
64927730 | 3618 | |
6f5165cf | 3619 | virt_dev = xhci->devs[udev->slot_id]; |
6f5165cf SS |
3620 | |
3621 | /* Stop any wayward timer functions (which may grab the lock) */ | |
3622 | for (i = 0; i < 31; ++i) { | |
3623 | virt_dev->eps[i].ep_state &= ~EP_HALT_PENDING; | |
3624 | del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); | |
3625 | } | |
3ffbba95 SS |
3626 | |
3627 | spin_lock_irqsave(&xhci->lock, flags); | |
c526d0d4 | 3628 | /* Don't disable the slot if the host controller is dead. */ |
b0ba9720 | 3629 | state = readl(&xhci->op_regs->status); |
7bd89b40 SS |
3630 | if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) || |
3631 | (xhci->xhc_state & XHCI_STATE_HALTED)) { | |
c526d0d4 SS |
3632 | xhci_free_virt_device(xhci, udev->slot_id); |
3633 | spin_unlock_irqrestore(&xhci->lock, flags); | |
ddba5cd0 | 3634 | kfree(command); |
c526d0d4 SS |
3635 | return; |
3636 | } | |
3637 | ||
ddba5cd0 MN |
3638 | if (xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT, |
3639 | udev->slot_id)) { | |
3ffbba95 SS |
3640 | spin_unlock_irqrestore(&xhci->lock, flags); |
3641 | xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); | |
3642 | return; | |
3643 | } | |
23e3be11 | 3644 | xhci_ring_cmd_db(xhci); |
3ffbba95 | 3645 | spin_unlock_irqrestore(&xhci->lock, flags); |
ddba5cd0 | 3646 | |
3ffbba95 SS |
3647 | /* |
3648 | * Event command completion handler will free any data structures | |
f88ba78d | 3649 | * associated with the slot. XXX Can free sleep? |
3ffbba95 SS |
3650 | */ |
3651 | } | |
3652 | ||
2cf95c18 SS |
3653 | /* |
3654 | * Checks if we have enough host controller resources for the default control | |
3655 | * endpoint. | |
3656 | * | |
3657 | * Must be called with xhci->lock held. | |
3658 | */ | |
3659 | static int xhci_reserve_host_control_ep_resources(struct xhci_hcd *xhci) | |
3660 | { | |
3661 | if (xhci->num_active_eps + 1 > xhci->limit_active_eps) { | |
4bdfe4c3 XR |
3662 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
3663 | "Not enough ep ctxs: " | |
3664 | "%u active, need to add 1, limit is %u.", | |
2cf95c18 SS |
3665 | xhci->num_active_eps, xhci->limit_active_eps); |
3666 | return -ENOMEM; | |
3667 | } | |
3668 | xhci->num_active_eps += 1; | |
4bdfe4c3 XR |
3669 | xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, |
3670 | "Adding 1 ep ctx, %u now active.", | |
2cf95c18 SS |
3671 | xhci->num_active_eps); |
3672 | return 0; | |
3673 | } | |
3674 | ||
3675 | ||
3ffbba95 SS |
3676 | /* |
3677 | * Returns 0 if the xHC ran out of device slots, the Enable Slot command | |
3678 | * timed out, or allocating memory failed. Returns 1 on success. | |
3679 | */ | |
3680 | int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) | |
3681 | { | |
3682 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
3683 | unsigned long flags; | |
3ffbba95 | 3684 | int ret; |
ddba5cd0 MN |
3685 | struct xhci_command *command; |
3686 | ||
3687 | command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); | |
3688 | if (!command) | |
3689 | return 0; | |
3ffbba95 SS |
3690 | |
3691 | spin_lock_irqsave(&xhci->lock, flags); | |
ddba5cd0 MN |
3692 | command->completion = &xhci->addr_dev; |
3693 | ret = xhci_queue_slot_control(xhci, command, TRB_ENABLE_SLOT, 0); | |
3ffbba95 SS |
3694 | if (ret) { |
3695 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3696 | xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); | |
ddba5cd0 | 3697 | kfree(command); |
3ffbba95 SS |
3698 | return 0; |
3699 | } | |
23e3be11 | 3700 | xhci_ring_cmd_db(xhci); |
3ffbba95 SS |
3701 | spin_unlock_irqrestore(&xhci->lock, flags); |
3702 | ||
c311e391 | 3703 | wait_for_completion(command->completion); |
3ffbba95 | 3704 | |
c311e391 | 3705 | if (!xhci->slot_id || command->status != COMP_SUCCESS) { |
3ffbba95 | 3706 | xhci_err(xhci, "Error while assigning device slot ID\n"); |
be982038 SS |
3707 | xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n", |
3708 | HCS_MAX_SLOTS( | |
3709 | readl(&xhci->cap_regs->hcs_params1))); | |
ddba5cd0 | 3710 | kfree(command); |
3ffbba95 SS |
3711 | return 0; |
3712 | } | |
2cf95c18 SS |
3713 | |
3714 | if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) { | |
3715 | spin_lock_irqsave(&xhci->lock, flags); | |
3716 | ret = xhci_reserve_host_control_ep_resources(xhci); | |
3717 | if (ret) { | |
3718 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3719 | xhci_warn(xhci, "Not enough host resources, " | |
3720 | "active endpoint contexts = %u\n", | |
3721 | xhci->num_active_eps); | |
3722 | goto disable_slot; | |
3723 | } | |
3724 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3725 | } | |
3726 | /* Use GFP_NOIO, since this function can be called from | |
a6d940dd SS |
3727 | * xhci_discover_or_reset_device(), which may be called as part of |
3728 | * mass storage driver error handling. | |
3729 | */ | |
3730 | if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) { | |
3ffbba95 | 3731 | xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); |
2cf95c18 | 3732 | goto disable_slot; |
3ffbba95 SS |
3733 | } |
3734 | udev->slot_id = xhci->slot_id; | |
c8476fb8 SN |
3735 | |
3736 | #ifndef CONFIG_USB_DEFAULT_PERSIST | |
3737 | /* | |
3738 | * If resetting upon resume, we can't put the controller into runtime | |
3739 | * suspend if there is a device attached. | |
3740 | */ | |
3741 | if (xhci->quirks & XHCI_RESET_ON_RESUME) | |
e7ecf069 | 3742 | pm_runtime_get_noresume(hcd->self.controller); |
c8476fb8 SN |
3743 | #endif |
3744 | ||
ddba5cd0 MN |
3745 | |
3746 | kfree(command); | |
3ffbba95 SS |
3747 | /* Is this a LS or FS device under a HS hub? */ |
3748 | /* Hub or peripherial? */ | |
3ffbba95 | 3749 | return 1; |
2cf95c18 SS |
3750 | |
3751 | disable_slot: | |
3752 | /* Disable slot, if we can do it without mem alloc */ | |
3753 | spin_lock_irqsave(&xhci->lock, flags); | |
ddba5cd0 MN |
3754 | command->completion = NULL; |
3755 | command->status = 0; | |
3756 | if (!xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT, | |
3757 | udev->slot_id)) | |
2cf95c18 SS |
3758 | xhci_ring_cmd_db(xhci); |
3759 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3760 | return 0; | |
3ffbba95 SS |
3761 | } |
3762 | ||
3763 | /* | |
48fc7dbd DW |
3764 | * Issue an Address Device command and optionally send a corresponding |
3765 | * SetAddress request to the device. | |
37ebb549 PM |
3766 | * We should be protected by the usb_address0_mutex in hub_wq's hub_port_init, |
3767 | * so we should only issue and wait on one address command at the same time. | |
3ffbba95 | 3768 | */ |
48fc7dbd DW |
3769 | static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, |
3770 | enum xhci_setup_dev setup) | |
3ffbba95 | 3771 | { |
6f8ffc0b | 3772 | const char *act = setup == SETUP_CONTEXT_ONLY ? "context" : "address"; |
3ffbba95 | 3773 | unsigned long flags; |
3ffbba95 SS |
3774 | struct xhci_virt_device *virt_dev; |
3775 | int ret = 0; | |
3776 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
d115b048 JY |
3777 | struct xhci_slot_ctx *slot_ctx; |
3778 | struct xhci_input_control_ctx *ctrl_ctx; | |
8e595a5d | 3779 | u64 temp_64; |
ddba5cd0 | 3780 | struct xhci_command *command; |
3ffbba95 SS |
3781 | |
3782 | if (!udev->slot_id) { | |
84a99f6f XR |
3783 | xhci_dbg_trace(xhci, trace_xhci_dbg_address, |
3784 | "Bad Slot ID %d", udev->slot_id); | |
3ffbba95 SS |
3785 | return -EINVAL; |
3786 | } | |
3787 | ||
3ffbba95 SS |
3788 | virt_dev = xhci->devs[udev->slot_id]; |
3789 | ||
7ed603ec ME |
3790 | if (WARN_ON(!virt_dev)) { |
3791 | /* | |
3792 | * In plug/unplug torture test with an NEC controller, | |
3793 | * a zero-dereference was observed once due to virt_dev = 0. | |
3794 | * Print useful debug rather than crash if it is observed again! | |
3795 | */ | |
3796 | xhci_warn(xhci, "Virt dev invalid for slot_id 0x%x!\n", | |
3797 | udev->slot_id); | |
3798 | return -EINVAL; | |
3799 | } | |
3800 | ||
ddba5cd0 MN |
3801 | command = xhci_alloc_command(xhci, false, false, GFP_KERNEL); |
3802 | if (!command) | |
3803 | return -ENOMEM; | |
3804 | ||
3805 | command->in_ctx = virt_dev->in_ctx; | |
3806 | command->completion = &xhci->addr_dev; | |
3807 | ||
f0615c45 | 3808 | slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); |
92f8e767 SS |
3809 | ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); |
3810 | if (!ctrl_ctx) { | |
3811 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", | |
3812 | __func__); | |
ddba5cd0 | 3813 | kfree(command); |
92f8e767 SS |
3814 | return -EINVAL; |
3815 | } | |
f0615c45 AX |
3816 | /* |
3817 | * If this is the first Set Address since device plug-in or | |
3818 | * virt_device realloaction after a resume with an xHCI power loss, | |
3819 | * then set up the slot context. | |
3820 | */ | |
3821 | if (!slot_ctx->dev_info) | |
3ffbba95 | 3822 | xhci_setup_addressable_virt_dev(xhci, udev); |
f0615c45 | 3823 | /* Otherwise, update the control endpoint ring enqueue pointer. */ |
2d1ee590 SS |
3824 | else |
3825 | xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev); | |
d31c285b SS |
3826 | ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG); |
3827 | ctrl_ctx->drop_flags = 0; | |
3828 | ||
66e49d87 | 3829 | xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); |
d115b048 | 3830 | xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); |
1d27fabe | 3831 | trace_xhci_address_ctx(xhci, virt_dev->in_ctx, |
0c052aab | 3832 | le32_to_cpu(slot_ctx->dev_info) >> 27); |
3ffbba95 | 3833 | |
f88ba78d | 3834 | spin_lock_irqsave(&xhci->lock, flags); |
ddba5cd0 | 3835 | ret = xhci_queue_address_device(xhci, command, virt_dev->in_ctx->dma, |
48fc7dbd | 3836 | udev->slot_id, setup); |
3ffbba95 SS |
3837 | if (ret) { |
3838 | spin_unlock_irqrestore(&xhci->lock, flags); | |
84a99f6f XR |
3839 | xhci_dbg_trace(xhci, trace_xhci_dbg_address, |
3840 | "FIXME: allocate a command ring segment"); | |
ddba5cd0 | 3841 | kfree(command); |
3ffbba95 SS |
3842 | return ret; |
3843 | } | |
23e3be11 | 3844 | xhci_ring_cmd_db(xhci); |
3ffbba95 SS |
3845 | spin_unlock_irqrestore(&xhci->lock, flags); |
3846 | ||
3847 | /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */ | |
c311e391 MN |
3848 | wait_for_completion(command->completion); |
3849 | ||
3ffbba95 SS |
3850 | /* FIXME: From section 4.3.4: "Software shall be responsible for timing |
3851 | * the SetAddress() "recovery interval" required by USB and aborting the | |
3852 | * command on a timeout. | |
3853 | */ | |
9ea1833e | 3854 | switch (command->status) { |
c311e391 MN |
3855 | case COMP_CMD_ABORT: |
3856 | case COMP_CMD_STOP: | |
3857 | xhci_warn(xhci, "Timeout while waiting for setup device command\n"); | |
3858 | ret = -ETIME; | |
3859 | break; | |
3ffbba95 SS |
3860 | case COMP_CTX_STATE: |
3861 | case COMP_EBADSLT: | |
6f8ffc0b DW |
3862 | xhci_err(xhci, "Setup ERROR: setup %s command for slot %d.\n", |
3863 | act, udev->slot_id); | |
3ffbba95 SS |
3864 | ret = -EINVAL; |
3865 | break; | |
3866 | case COMP_TX_ERR: | |
6f8ffc0b | 3867 | dev_warn(&udev->dev, "Device not responding to setup %s.\n", act); |
3ffbba95 SS |
3868 | ret = -EPROTO; |
3869 | break; | |
f6ba6fe2 | 3870 | case COMP_DEV_ERR: |
6f8ffc0b DW |
3871 | dev_warn(&udev->dev, |
3872 | "ERROR: Incompatible device for setup %s command\n", act); | |
f6ba6fe2 AH |
3873 | ret = -ENODEV; |
3874 | break; | |
3ffbba95 | 3875 | case COMP_SUCCESS: |
84a99f6f | 3876 | xhci_dbg_trace(xhci, trace_xhci_dbg_address, |
6f8ffc0b | 3877 | "Successful setup %s command", act); |
3ffbba95 SS |
3878 | break; |
3879 | default: | |
6f8ffc0b DW |
3880 | xhci_err(xhci, |
3881 | "ERROR: unexpected setup %s command completion code 0x%x.\n", | |
9ea1833e | 3882 | act, command->status); |
66e49d87 | 3883 | xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); |
d115b048 | 3884 | xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); |
1d27fabe | 3885 | trace_xhci_address_ctx(xhci, virt_dev->out_ctx, 1); |
3ffbba95 SS |
3886 | ret = -EINVAL; |
3887 | break; | |
3888 | } | |
3889 | if (ret) { | |
ddba5cd0 | 3890 | kfree(command); |
3ffbba95 SS |
3891 | return ret; |
3892 | } | |
f7b2e403 | 3893 | temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); |
84a99f6f XR |
3894 | xhci_dbg_trace(xhci, trace_xhci_dbg_address, |
3895 | "Op regs DCBAA ptr = %#016llx", temp_64); | |
3896 | xhci_dbg_trace(xhci, trace_xhci_dbg_address, | |
3897 | "Slot ID %d dcbaa entry @%p = %#016llx", | |
3898 | udev->slot_id, | |
3899 | &xhci->dcbaa->dev_context_ptrs[udev->slot_id], | |
3900 | (unsigned long long) | |
3901 | le64_to_cpu(xhci->dcbaa->dev_context_ptrs[udev->slot_id])); | |
3902 | xhci_dbg_trace(xhci, trace_xhci_dbg_address, | |
3903 | "Output Context DMA address = %#08llx", | |
d115b048 | 3904 | (unsigned long long)virt_dev->out_ctx->dma); |
3ffbba95 | 3905 | xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); |
d115b048 | 3906 | xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); |
1d27fabe | 3907 | trace_xhci_address_ctx(xhci, virt_dev->in_ctx, |
0c052aab | 3908 | le32_to_cpu(slot_ctx->dev_info) >> 27); |
3ffbba95 | 3909 | xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); |
d115b048 | 3910 | xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); |
3ffbba95 SS |
3911 | /* |
3912 | * USB core uses address 1 for the roothubs, so we add one to the | |
3913 | * address given back to us by the HC. | |
3914 | */ | |
d115b048 | 3915 | slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); |
1d27fabe | 3916 | trace_xhci_address_ctx(xhci, virt_dev->out_ctx, |
0c052aab | 3917 | le32_to_cpu(slot_ctx->dev_info) >> 27); |
f94e0186 | 3918 | /* Zero the input context control for later use */ |
d115b048 JY |
3919 | ctrl_ctx->add_flags = 0; |
3920 | ctrl_ctx->drop_flags = 0; | |
3ffbba95 | 3921 | |
84a99f6f | 3922 | xhci_dbg_trace(xhci, trace_xhci_dbg_address, |
a2cdc343 DW |
3923 | "Internal device address = %d", |
3924 | le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK); | |
ddba5cd0 | 3925 | kfree(command); |
3ffbba95 SS |
3926 | return 0; |
3927 | } | |
3928 | ||
48fc7dbd DW |
3929 | int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) |
3930 | { | |
3931 | return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ADDRESS); | |
3932 | } | |
3933 | ||
3934 | int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev) | |
3935 | { | |
3936 | return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ONLY); | |
3937 | } | |
3938 | ||
3f5eb141 LT |
3939 | /* |
3940 | * Transfer the port index into real index in the HW port status | |
3941 | * registers. Caculate offset between the port's PORTSC register | |
3942 | * and port status base. Divide the number of per port register | |
3943 | * to get the real index. The raw port number bases 1. | |
3944 | */ | |
3945 | int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1) | |
3946 | { | |
3947 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
3948 | __le32 __iomem *base_addr = &xhci->op_regs->port_status_base; | |
3949 | __le32 __iomem *addr; | |
3950 | int raw_port; | |
3951 | ||
3952 | if (hcd->speed != HCD_USB3) | |
3953 | addr = xhci->usb2_ports[port1 - 1]; | |
3954 | else | |
3955 | addr = xhci->usb3_ports[port1 - 1]; | |
3956 | ||
3957 | raw_port = (addr - base_addr)/NUM_PORT_REGS + 1; | |
3958 | return raw_port; | |
3959 | } | |
3960 | ||
a558ccdc MN |
3961 | /* |
3962 | * Issue an Evaluate Context command to change the Maximum Exit Latency in the | |
3963 | * slot context. If that succeeds, store the new MEL in the xhci_virt_device. | |
3964 | */ | |
d5c82feb | 3965 | static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci, |
a558ccdc MN |
3966 | struct usb_device *udev, u16 max_exit_latency) |
3967 | { | |
3968 | struct xhci_virt_device *virt_dev; | |
3969 | struct xhci_command *command; | |
3970 | struct xhci_input_control_ctx *ctrl_ctx; | |
3971 | struct xhci_slot_ctx *slot_ctx; | |
3972 | unsigned long flags; | |
3973 | int ret; | |
3974 | ||
3975 | spin_lock_irqsave(&xhci->lock, flags); | |
96044694 MN |
3976 | |
3977 | virt_dev = xhci->devs[udev->slot_id]; | |
3978 | ||
3979 | /* | |
3980 | * virt_dev might not exists yet if xHC resumed from hibernate (S4) and | |
3981 | * xHC was re-initialized. Exit latency will be set later after | |
3982 | * hub_port_finish_reset() is done and xhci->devs[] are re-allocated | |
3983 | */ | |
3984 | ||
3985 | if (!virt_dev || max_exit_latency == virt_dev->current_mel) { | |
a558ccdc MN |
3986 | spin_unlock_irqrestore(&xhci->lock, flags); |
3987 | return 0; | |
3988 | } | |
3989 | ||
3990 | /* Attempt to issue an Evaluate Context command to change the MEL. */ | |
a558ccdc | 3991 | command = xhci->lpm_command; |
92f8e767 SS |
3992 | ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); |
3993 | if (!ctrl_ctx) { | |
3994 | spin_unlock_irqrestore(&xhci->lock, flags); | |
3995 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", | |
3996 | __func__); | |
3997 | return -ENOMEM; | |
3998 | } | |
3999 | ||
a558ccdc MN |
4000 | xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx); |
4001 | spin_unlock_irqrestore(&xhci->lock, flags); | |
4002 | ||
a558ccdc MN |
4003 | ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); |
4004 | slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx); | |
4005 | slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT)); | |
4006 | slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency); | |
4007 | ||
3a7fa5be XR |
4008 | xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, |
4009 | "Set up evaluate context for LPM MEL change."); | |
a558ccdc MN |
4010 | xhci_dbg(xhci, "Slot %u Input Context:\n", udev->slot_id); |
4011 | xhci_dbg_ctx(xhci, command->in_ctx, 0); | |
4012 | ||
4013 | /* Issue and wait for the evaluate context command. */ | |
4014 | ret = xhci_configure_endpoint(xhci, udev, command, | |
4015 | true, true); | |
4016 | xhci_dbg(xhci, "Slot %u Output Context:\n", udev->slot_id); | |
4017 | xhci_dbg_ctx(xhci, virt_dev->out_ctx, 0); | |
4018 | ||
4019 | if (!ret) { | |
4020 | spin_lock_irqsave(&xhci->lock, flags); | |
4021 | virt_dev->current_mel = max_exit_latency; | |
4022 | spin_unlock_irqrestore(&xhci->lock, flags); | |
4023 | } | |
4024 | return ret; | |
4025 | } | |
4026 | ||
84ebc102 | 4027 | #ifdef CONFIG_PM_RUNTIME |
9574323c AX |
4028 | |
4029 | /* BESL to HIRD Encoding array for USB2 LPM */ | |
4030 | static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000, | |
4031 | 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000}; | |
4032 | ||
4033 | /* Calculate HIRD/BESL for USB2 PORTPMSC*/ | |
f99298bf AX |
4034 | static int xhci_calculate_hird_besl(struct xhci_hcd *xhci, |
4035 | struct usb_device *udev) | |
9574323c | 4036 | { |
f99298bf AX |
4037 | int u2del, besl, besl_host; |
4038 | int besl_device = 0; | |
4039 | u32 field; | |
4040 | ||
4041 | u2del = HCS_U2_LATENCY(xhci->hcs_params3); | |
4042 | field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); | |
9574323c | 4043 | |
f99298bf AX |
4044 | if (field & USB_BESL_SUPPORT) { |
4045 | for (besl_host = 0; besl_host < 16; besl_host++) { | |
4046 | if (xhci_besl_encoding[besl_host] >= u2del) | |
9574323c AX |
4047 | break; |
4048 | } | |
f99298bf AX |
4049 | /* Use baseline BESL value as default */ |
4050 | if (field & USB_BESL_BASELINE_VALID) | |
4051 | besl_device = USB_GET_BESL_BASELINE(field); | |
4052 | else if (field & USB_BESL_DEEP_VALID) | |
4053 | besl_device = USB_GET_BESL_DEEP(field); | |
9574323c AX |
4054 | } else { |
4055 | if (u2del <= 50) | |
f99298bf | 4056 | besl_host = 0; |
9574323c | 4057 | else |
f99298bf | 4058 | besl_host = (u2del - 51) / 75 + 1; |
9574323c AX |
4059 | } |
4060 | ||
f99298bf AX |
4061 | besl = besl_host + besl_device; |
4062 | if (besl > 15) | |
4063 | besl = 15; | |
4064 | ||
4065 | return besl; | |
9574323c AX |
4066 | } |
4067 | ||
a558ccdc MN |
4068 | /* Calculate BESLD, L1 timeout and HIRDM for USB2 PORTHLPMC */ |
4069 | static int xhci_calculate_usb2_hw_lpm_params(struct usb_device *udev) | |
4070 | { | |
4071 | u32 field; | |
4072 | int l1; | |
4073 | int besld = 0; | |
4074 | int hirdm = 0; | |
4075 | ||
4076 | field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); | |
4077 | ||
4078 | /* xHCI l1 is set in steps of 256us, xHCI 1.0 section 5.4.11.2 */ | |
17f34867 | 4079 | l1 = udev->l1_params.timeout / 256; |
a558ccdc MN |
4080 | |
4081 | /* device has preferred BESLD */ | |
4082 | if (field & USB_BESL_DEEP_VALID) { | |
4083 | besld = USB_GET_BESL_DEEP(field); | |
4084 | hirdm = 1; | |
4085 | } | |
4086 | ||
4087 | return PORT_BESLD(besld) | PORT_L1_TIMEOUT(l1) | PORT_HIRDM(hirdm); | |
4088 | } | |
4089 | ||
65580b43 AX |
4090 | int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, |
4091 | struct usb_device *udev, int enable) | |
4092 | { | |
4093 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
4094 | __le32 __iomem **port_array; | |
a558ccdc MN |
4095 | __le32 __iomem *pm_addr, *hlpm_addr; |
4096 | u32 pm_val, hlpm_val, field; | |
65580b43 AX |
4097 | unsigned int port_num; |
4098 | unsigned long flags; | |
a558ccdc MN |
4099 | int hird, exit_latency; |
4100 | int ret; | |
65580b43 AX |
4101 | |
4102 | if (hcd->speed == HCD_USB3 || !xhci->hw_lpm_support || | |
4103 | !udev->lpm_capable) | |
4104 | return -EPERM; | |
4105 | ||
4106 | if (!udev->parent || udev->parent->parent || | |
4107 | udev->descriptor.bDeviceClass == USB_CLASS_HUB) | |
4108 | return -EPERM; | |
4109 | ||
4110 | if (udev->usb2_hw_lpm_capable != 1) | |
4111 | return -EPERM; | |
4112 | ||
4113 | spin_lock_irqsave(&xhci->lock, flags); | |
4114 | ||
4115 | port_array = xhci->usb2_ports; | |
4116 | port_num = udev->portnum - 1; | |
b6e76371 | 4117 | pm_addr = port_array[port_num] + PORTPMSC; |
b0ba9720 | 4118 | pm_val = readl(pm_addr); |
a558ccdc MN |
4119 | hlpm_addr = port_array[port_num] + PORTHLPMC; |
4120 | field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); | |
65580b43 AX |
4121 | |
4122 | xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", | |
654a55d3 | 4123 | enable ? "enable" : "disable", port_num + 1); |
65580b43 | 4124 | |
65580b43 | 4125 | if (enable) { |
a558ccdc MN |
4126 | /* Host supports BESL timeout instead of HIRD */ |
4127 | if (udev->usb2_hw_lpm_besl_capable) { | |
4128 | /* if device doesn't have a preferred BESL value use a | |
4129 | * default one which works with mixed HIRD and BESL | |
4130 | * systems. See XHCI_DEFAULT_BESL definition in xhci.h | |
4131 | */ | |
4132 | if ((field & USB_BESL_SUPPORT) && | |
4133 | (field & USB_BESL_BASELINE_VALID)) | |
4134 | hird = USB_GET_BESL_BASELINE(field); | |
4135 | else | |
17f34867 | 4136 | hird = udev->l1_params.besl; |
a558ccdc MN |
4137 | |
4138 | exit_latency = xhci_besl_encoding[hird]; | |
4139 | spin_unlock_irqrestore(&xhci->lock, flags); | |
4140 | ||
4141 | /* USB 3.0 code dedicate one xhci->lpm_command->in_ctx | |
4142 | * input context for link powermanagement evaluate | |
4143 | * context commands. It is protected by hcd->bandwidth | |
4144 | * mutex and is shared by all devices. We need to set | |
4145 | * the max ext latency in USB 2 BESL LPM as well, so | |
4146 | * use the same mutex and xhci_change_max_exit_latency() | |
4147 | */ | |
4148 | mutex_lock(hcd->bandwidth_mutex); | |
4149 | ret = xhci_change_max_exit_latency(xhci, udev, | |
4150 | exit_latency); | |
4151 | mutex_unlock(hcd->bandwidth_mutex); | |
4152 | ||
4153 | if (ret < 0) | |
4154 | return ret; | |
4155 | spin_lock_irqsave(&xhci->lock, flags); | |
4156 | ||
4157 | hlpm_val = xhci_calculate_usb2_hw_lpm_params(udev); | |
204b7793 | 4158 | writel(hlpm_val, hlpm_addr); |
a558ccdc | 4159 | /* flush write */ |
b0ba9720 | 4160 | readl(hlpm_addr); |
a558ccdc MN |
4161 | } else { |
4162 | hird = xhci_calculate_hird_besl(xhci, udev); | |
4163 | } | |
4164 | ||
4165 | pm_val &= ~PORT_HIRD_MASK; | |
58e21f73 | 4166 | pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id); |
204b7793 | 4167 | writel(pm_val, pm_addr); |
b0ba9720 | 4168 | pm_val = readl(pm_addr); |
a558ccdc | 4169 | pm_val |= PORT_HLE; |
204b7793 | 4170 | writel(pm_val, pm_addr); |
a558ccdc | 4171 | /* flush write */ |
b0ba9720 | 4172 | readl(pm_addr); |
65580b43 | 4173 | } else { |
58e21f73 | 4174 | pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK | PORT_L1DS_MASK); |
204b7793 | 4175 | writel(pm_val, pm_addr); |
a558ccdc | 4176 | /* flush write */ |
b0ba9720 | 4177 | readl(pm_addr); |
a558ccdc MN |
4178 | if (udev->usb2_hw_lpm_besl_capable) { |
4179 | spin_unlock_irqrestore(&xhci->lock, flags); | |
4180 | mutex_lock(hcd->bandwidth_mutex); | |
4181 | xhci_change_max_exit_latency(xhci, udev, 0); | |
4182 | mutex_unlock(hcd->bandwidth_mutex); | |
4183 | return 0; | |
4184 | } | |
65580b43 AX |
4185 | } |
4186 | ||
4187 | spin_unlock_irqrestore(&xhci->lock, flags); | |
4188 | return 0; | |
4189 | } | |
4190 | ||
b630d4b9 MN |
4191 | /* check if a usb2 port supports a given extened capability protocol |
4192 | * only USB2 ports extended protocol capability values are cached. | |
4193 | * Return 1 if capability is supported | |
4194 | */ | |
4195 | static int xhci_check_usb2_port_capability(struct xhci_hcd *xhci, int port, | |
4196 | unsigned capability) | |
4197 | { | |
4198 | u32 port_offset, port_count; | |
4199 | int i; | |
4200 | ||
4201 | for (i = 0; i < xhci->num_ext_caps; i++) { | |
4202 | if (xhci->ext_caps[i] & capability) { | |
4203 | /* port offsets starts at 1 */ | |
4204 | port_offset = XHCI_EXT_PORT_OFF(xhci->ext_caps[i]) - 1; | |
4205 | port_count = XHCI_EXT_PORT_COUNT(xhci->ext_caps[i]); | |
4206 | if (port >= port_offset && | |
4207 | port < port_offset + port_count) | |
4208 | return 1; | |
4209 | } | |
4210 | } | |
4211 | return 0; | |
4212 | } | |
4213 | ||
b01bcbf7 SS |
4214 | int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) |
4215 | { | |
4216 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
b630d4b9 | 4217 | int portnum = udev->portnum - 1; |
b01bcbf7 | 4218 | |
de68bab4 SS |
4219 | if (hcd->speed == HCD_USB3 || !xhci->sw_lpm_support || |
4220 | !udev->lpm_capable) | |
4221 | return 0; | |
4222 | ||
4223 | /* we only support lpm for non-hub device connected to root hub yet */ | |
4224 | if (!udev->parent || udev->parent->parent || | |
4225 | udev->descriptor.bDeviceClass == USB_CLASS_HUB) | |
4226 | return 0; | |
4227 | ||
4228 | if (xhci->hw_lpm_support == 1 && | |
4229 | xhci_check_usb2_port_capability( | |
4230 | xhci, portnum, XHCI_HLC)) { | |
4231 | udev->usb2_hw_lpm_capable = 1; | |
4232 | udev->l1_params.timeout = XHCI_L1_TIMEOUT; | |
4233 | udev->l1_params.besl = XHCI_DEFAULT_BESL; | |
4234 | if (xhci_check_usb2_port_capability(xhci, portnum, | |
4235 | XHCI_BLC)) | |
4236 | udev->usb2_hw_lpm_besl_capable = 1; | |
b01bcbf7 SS |
4237 | } |
4238 | ||
4239 | return 0; | |
4240 | } | |
4241 | ||
4242 | #else | |
4243 | ||
4244 | int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, | |
4245 | struct usb_device *udev, int enable) | |
4246 | { | |
4247 | return 0; | |
4248 | } | |
4249 | ||
4250 | int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) | |
4251 | { | |
4252 | return 0; | |
4253 | } | |
4254 | ||
84ebc102 | 4255 | #endif /* CONFIG_PM_RUNTIME */ |
b01bcbf7 | 4256 | |
3b3db026 SS |
4257 | /*---------------------- USB 3.0 Link PM functions ------------------------*/ |
4258 | ||
b01bcbf7 | 4259 | #ifdef CONFIG_PM |
e3567d2c SS |
4260 | /* Service interval in nanoseconds = 2^(bInterval - 1) * 125us * 1000ns / 1us */ |
4261 | static unsigned long long xhci_service_interval_to_ns( | |
4262 | struct usb_endpoint_descriptor *desc) | |
4263 | { | |
16b45fdf | 4264 | return (1ULL << (desc->bInterval - 1)) * 125 * 1000; |
e3567d2c SS |
4265 | } |
4266 | ||
3b3db026 SS |
4267 | static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev, |
4268 | enum usb3_link_state state) | |
4269 | { | |
4270 | unsigned long long sel; | |
4271 | unsigned long long pel; | |
4272 | unsigned int max_sel_pel; | |
4273 | char *state_name; | |
4274 | ||
4275 | switch (state) { | |
4276 | case USB3_LPM_U1: | |
4277 | /* Convert SEL and PEL stored in nanoseconds to microseconds */ | |
4278 | sel = DIV_ROUND_UP(udev->u1_params.sel, 1000); | |
4279 | pel = DIV_ROUND_UP(udev->u1_params.pel, 1000); | |
4280 | max_sel_pel = USB3_LPM_MAX_U1_SEL_PEL; | |
4281 | state_name = "U1"; | |
4282 | break; | |
4283 | case USB3_LPM_U2: | |
4284 | sel = DIV_ROUND_UP(udev->u2_params.sel, 1000); | |
4285 | pel = DIV_ROUND_UP(udev->u2_params.pel, 1000); | |
4286 | max_sel_pel = USB3_LPM_MAX_U2_SEL_PEL; | |
4287 | state_name = "U2"; | |
4288 | break; | |
4289 | default: | |
4290 | dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n", | |
4291 | __func__); | |
e25e62ae | 4292 | return USB3_LPM_DISABLED; |
3b3db026 SS |
4293 | } |
4294 | ||
4295 | if (sel <= max_sel_pel && pel <= max_sel_pel) | |
4296 | return USB3_LPM_DEVICE_INITIATED; | |
4297 | ||
4298 | if (sel > max_sel_pel) | |
4299 | dev_dbg(&udev->dev, "Device-initiated %s disabled " | |
4300 | "due to long SEL %llu ms\n", | |
4301 | state_name, sel); | |
4302 | else | |
4303 | dev_dbg(&udev->dev, "Device-initiated %s disabled " | |
03e64e96 | 4304 | "due to long PEL %llu ms\n", |
3b3db026 SS |
4305 | state_name, pel); |
4306 | return USB3_LPM_DISABLED; | |
4307 | } | |
4308 | ||
9502c46c | 4309 | /* The U1 timeout should be the maximum of the following values: |
e3567d2c SS |
4310 | * - For control endpoints, U1 system exit latency (SEL) * 3 |
4311 | * - For bulk endpoints, U1 SEL * 5 | |
4312 | * - For interrupt endpoints: | |
4313 | * - Notification EPs, U1 SEL * 3 | |
4314 | * - Periodic EPs, max(105% of bInterval, U1 SEL * 2) | |
4315 | * - For isochronous endpoints, max(105% of bInterval, U1 SEL * 2) | |
4316 | */ | |
9502c46c PA |
4317 | static unsigned long long xhci_calculate_intel_u1_timeout( |
4318 | struct usb_device *udev, | |
e3567d2c SS |
4319 | struct usb_endpoint_descriptor *desc) |
4320 | { | |
4321 | unsigned long long timeout_ns; | |
4322 | int ep_type; | |
4323 | int intr_type; | |
4324 | ||
4325 | ep_type = usb_endpoint_type(desc); | |
4326 | switch (ep_type) { | |
4327 | case USB_ENDPOINT_XFER_CONTROL: | |
4328 | timeout_ns = udev->u1_params.sel * 3; | |
4329 | break; | |
4330 | case USB_ENDPOINT_XFER_BULK: | |
4331 | timeout_ns = udev->u1_params.sel * 5; | |
4332 | break; | |
4333 | case USB_ENDPOINT_XFER_INT: | |
4334 | intr_type = usb_endpoint_interrupt_type(desc); | |
4335 | if (intr_type == USB_ENDPOINT_INTR_NOTIFICATION) { | |
4336 | timeout_ns = udev->u1_params.sel * 3; | |
4337 | break; | |
4338 | } | |
4339 | /* Otherwise the calculation is the same as isoc eps */ | |
4340 | case USB_ENDPOINT_XFER_ISOC: | |
4341 | timeout_ns = xhci_service_interval_to_ns(desc); | |
c88db160 | 4342 | timeout_ns = DIV_ROUND_UP_ULL(timeout_ns * 105, 100); |
e3567d2c SS |
4343 | if (timeout_ns < udev->u1_params.sel * 2) |
4344 | timeout_ns = udev->u1_params.sel * 2; | |
4345 | break; | |
4346 | default: | |
4347 | return 0; | |
4348 | } | |
4349 | ||
9502c46c PA |
4350 | return timeout_ns; |
4351 | } | |
4352 | ||
4353 | /* Returns the hub-encoded U1 timeout value. */ | |
4354 | static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci, | |
4355 | struct usb_device *udev, | |
4356 | struct usb_endpoint_descriptor *desc) | |
4357 | { | |
4358 | unsigned long long timeout_ns; | |
4359 | ||
4360 | if (xhci->quirks & XHCI_INTEL_HOST) | |
4361 | timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); | |
4362 | else | |
4363 | timeout_ns = udev->u1_params.sel; | |
4364 | ||
4365 | /* The U1 timeout is encoded in 1us intervals. | |
4366 | * Don't return a timeout of zero, because that's USB3_LPM_DISABLED. | |
4367 | */ | |
e3567d2c | 4368 | if (timeout_ns == USB3_LPM_DISABLED) |
9502c46c PA |
4369 | timeout_ns = 1; |
4370 | else | |
4371 | timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 1000); | |
e3567d2c SS |
4372 | |
4373 | /* If the necessary timeout value is bigger than what we can set in the | |
4374 | * USB 3.0 hub, we have to disable hub-initiated U1. | |
4375 | */ | |
4376 | if (timeout_ns <= USB3_LPM_U1_MAX_TIMEOUT) | |
4377 | return timeout_ns; | |
4378 | dev_dbg(&udev->dev, "Hub-initiated U1 disabled " | |
4379 | "due to long timeout %llu ms\n", timeout_ns); | |
4380 | return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U1); | |
4381 | } | |
4382 | ||
9502c46c | 4383 | /* The U2 timeout should be the maximum of: |
e3567d2c SS |
4384 | * - 10 ms (to avoid the bandwidth impact on the scheduler) |
4385 | * - largest bInterval of any active periodic endpoint (to avoid going | |
4386 | * into lower power link states between intervals). | |
4387 | * - the U2 Exit Latency of the device | |
4388 | */ | |
9502c46c PA |
4389 | static unsigned long long xhci_calculate_intel_u2_timeout( |
4390 | struct usb_device *udev, | |
e3567d2c SS |
4391 | struct usb_endpoint_descriptor *desc) |
4392 | { | |
4393 | unsigned long long timeout_ns; | |
4394 | unsigned long long u2_del_ns; | |
4395 | ||
4396 | timeout_ns = 10 * 1000 * 1000; | |
4397 | ||
4398 | if ((usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) && | |
4399 | (xhci_service_interval_to_ns(desc) > timeout_ns)) | |
4400 | timeout_ns = xhci_service_interval_to_ns(desc); | |
4401 | ||
966e7a85 | 4402 | u2_del_ns = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat) * 1000ULL; |
e3567d2c SS |
4403 | if (u2_del_ns > timeout_ns) |
4404 | timeout_ns = u2_del_ns; | |
4405 | ||
9502c46c PA |
4406 | return timeout_ns; |
4407 | } | |
4408 | ||
4409 | /* Returns the hub-encoded U2 timeout value. */ | |
4410 | static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci, | |
4411 | struct usb_device *udev, | |
4412 | struct usb_endpoint_descriptor *desc) | |
4413 | { | |
4414 | unsigned long long timeout_ns; | |
4415 | ||
4416 | if (xhci->quirks & XHCI_INTEL_HOST) | |
4417 | timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); | |
4418 | else | |
4419 | timeout_ns = udev->u2_params.sel; | |
4420 | ||
e3567d2c | 4421 | /* The U2 timeout is encoded in 256us intervals */ |
c88db160 | 4422 | timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000); |
e3567d2c SS |
4423 | /* If the necessary timeout value is bigger than what we can set in the |
4424 | * USB 3.0 hub, we have to disable hub-initiated U2. | |
4425 | */ | |
4426 | if (timeout_ns <= USB3_LPM_U2_MAX_TIMEOUT) | |
4427 | return timeout_ns; | |
4428 | dev_dbg(&udev->dev, "Hub-initiated U2 disabled " | |
4429 | "due to long timeout %llu ms\n", timeout_ns); | |
4430 | return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U2); | |
4431 | } | |
4432 | ||
3b3db026 SS |
4433 | static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci, |
4434 | struct usb_device *udev, | |
4435 | struct usb_endpoint_descriptor *desc, | |
4436 | enum usb3_link_state state, | |
4437 | u16 *timeout) | |
4438 | { | |
9502c46c PA |
4439 | if (state == USB3_LPM_U1) |
4440 | return xhci_calculate_u1_timeout(xhci, udev, desc); | |
4441 | else if (state == USB3_LPM_U2) | |
4442 | return xhci_calculate_u2_timeout(xhci, udev, desc); | |
e3567d2c | 4443 | |
3b3db026 SS |
4444 | return USB3_LPM_DISABLED; |
4445 | } | |
4446 | ||
4447 | static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci, | |
4448 | struct usb_device *udev, | |
4449 | struct usb_endpoint_descriptor *desc, | |
4450 | enum usb3_link_state state, | |
4451 | u16 *timeout) | |
4452 | { | |
4453 | u16 alt_timeout; | |
4454 | ||
4455 | alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev, | |
4456 | desc, state, timeout); | |
4457 | ||
4458 | /* If we found we can't enable hub-initiated LPM, or | |
4459 | * the U1 or U2 exit latency was too high to allow | |
4460 | * device-initiated LPM as well, just stop searching. | |
4461 | */ | |
4462 | if (alt_timeout == USB3_LPM_DISABLED || | |
4463 | alt_timeout == USB3_LPM_DEVICE_INITIATED) { | |
4464 | *timeout = alt_timeout; | |
4465 | return -E2BIG; | |
4466 | } | |
4467 | if (alt_timeout > *timeout) | |
4468 | *timeout = alt_timeout; | |
4469 | return 0; | |
4470 | } | |
4471 | ||
4472 | static int xhci_update_timeout_for_interface(struct xhci_hcd *xhci, | |
4473 | struct usb_device *udev, | |
4474 | struct usb_host_interface *alt, | |
4475 | enum usb3_link_state state, | |
4476 | u16 *timeout) | |
4477 | { | |
4478 | int j; | |
4479 | ||
4480 | for (j = 0; j < alt->desc.bNumEndpoints; j++) { | |
4481 | if (xhci_update_timeout_for_endpoint(xhci, udev, | |
4482 | &alt->endpoint[j].desc, state, timeout)) | |
4483 | return -E2BIG; | |
4484 | continue; | |
4485 | } | |
4486 | return 0; | |
4487 | } | |
4488 | ||
e3567d2c SS |
4489 | static int xhci_check_intel_tier_policy(struct usb_device *udev, |
4490 | enum usb3_link_state state) | |
4491 | { | |
4492 | struct usb_device *parent; | |
4493 | unsigned int num_hubs; | |
4494 | ||
4495 | if (state == USB3_LPM_U2) | |
4496 | return 0; | |
4497 | ||
4498 | /* Don't enable U1 if the device is on a 2nd tier hub or lower. */ | |
4499 | for (parent = udev->parent, num_hubs = 0; parent->parent; | |
4500 | parent = parent->parent) | |
4501 | num_hubs++; | |
4502 | ||
4503 | if (num_hubs < 2) | |
4504 | return 0; | |
4505 | ||
4506 | dev_dbg(&udev->dev, "Disabling U1 link state for device" | |
4507 | " below second-tier hub.\n"); | |
4508 | dev_dbg(&udev->dev, "Plug device into first-tier hub " | |
4509 | "to decrease power consumption.\n"); | |
4510 | return -E2BIG; | |
4511 | } | |
4512 | ||
3b3db026 SS |
4513 | static int xhci_check_tier_policy(struct xhci_hcd *xhci, |
4514 | struct usb_device *udev, | |
4515 | enum usb3_link_state state) | |
4516 | { | |
e3567d2c SS |
4517 | if (xhci->quirks & XHCI_INTEL_HOST) |
4518 | return xhci_check_intel_tier_policy(udev, state); | |
9502c46c PA |
4519 | else |
4520 | return 0; | |
3b3db026 SS |
4521 | } |
4522 | ||
4523 | /* Returns the U1 or U2 timeout that should be enabled. | |
4524 | * If the tier check or timeout setting functions return with a non-zero exit | |
4525 | * code, that means the timeout value has been finalized and we shouldn't look | |
4526 | * at any more endpoints. | |
4527 | */ | |
4528 | static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd, | |
4529 | struct usb_device *udev, enum usb3_link_state state) | |
4530 | { | |
4531 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
4532 | struct usb_host_config *config; | |
4533 | char *state_name; | |
4534 | int i; | |
4535 | u16 timeout = USB3_LPM_DISABLED; | |
4536 | ||
4537 | if (state == USB3_LPM_U1) | |
4538 | state_name = "U1"; | |
4539 | else if (state == USB3_LPM_U2) | |
4540 | state_name = "U2"; | |
4541 | else { | |
4542 | dev_warn(&udev->dev, "Can't enable unknown link state %i\n", | |
4543 | state); | |
4544 | return timeout; | |
4545 | } | |
4546 | ||
4547 | if (xhci_check_tier_policy(xhci, udev, state) < 0) | |
4548 | return timeout; | |
4549 | ||
4550 | /* Gather some information about the currently installed configuration | |
4551 | * and alternate interface settings. | |
4552 | */ | |
4553 | if (xhci_update_timeout_for_endpoint(xhci, udev, &udev->ep0.desc, | |
4554 | state, &timeout)) | |
4555 | return timeout; | |
4556 | ||
4557 | config = udev->actconfig; | |
4558 | if (!config) | |
4559 | return timeout; | |
4560 | ||
64ba419b | 4561 | for (i = 0; i < config->desc.bNumInterfaces; i++) { |
3b3db026 SS |
4562 | struct usb_driver *driver; |
4563 | struct usb_interface *intf = config->interface[i]; | |
4564 | ||
4565 | if (!intf) | |
4566 | continue; | |
4567 | ||
4568 | /* Check if any currently bound drivers want hub-initiated LPM | |
4569 | * disabled. | |
4570 | */ | |
4571 | if (intf->dev.driver) { | |
4572 | driver = to_usb_driver(intf->dev.driver); | |
4573 | if (driver && driver->disable_hub_initiated_lpm) { | |
4574 | dev_dbg(&udev->dev, "Hub-initiated %s disabled " | |
4575 | "at request of driver %s\n", | |
4576 | state_name, driver->name); | |
4577 | return xhci_get_timeout_no_hub_lpm(udev, state); | |
4578 | } | |
4579 | } | |
4580 | ||
4581 | /* Not sure how this could happen... */ | |
4582 | if (!intf->cur_altsetting) | |
4583 | continue; | |
4584 | ||
4585 | if (xhci_update_timeout_for_interface(xhci, udev, | |
4586 | intf->cur_altsetting, | |
4587 | state, &timeout)) | |
4588 | return timeout; | |
4589 | } | |
4590 | return timeout; | |
4591 | } | |
4592 | ||
3b3db026 SS |
4593 | static int calculate_max_exit_latency(struct usb_device *udev, |
4594 | enum usb3_link_state state_changed, | |
4595 | u16 hub_encoded_timeout) | |
4596 | { | |
4597 | unsigned long long u1_mel_us = 0; | |
4598 | unsigned long long u2_mel_us = 0; | |
4599 | unsigned long long mel_us = 0; | |
4600 | bool disabling_u1; | |
4601 | bool disabling_u2; | |
4602 | bool enabling_u1; | |
4603 | bool enabling_u2; | |
4604 | ||
4605 | disabling_u1 = (state_changed == USB3_LPM_U1 && | |
4606 | hub_encoded_timeout == USB3_LPM_DISABLED); | |
4607 | disabling_u2 = (state_changed == USB3_LPM_U2 && | |
4608 | hub_encoded_timeout == USB3_LPM_DISABLED); | |
4609 | ||
4610 | enabling_u1 = (state_changed == USB3_LPM_U1 && | |
4611 | hub_encoded_timeout != USB3_LPM_DISABLED); | |
4612 | enabling_u2 = (state_changed == USB3_LPM_U2 && | |
4613 | hub_encoded_timeout != USB3_LPM_DISABLED); | |
4614 | ||
4615 | /* If U1 was already enabled and we're not disabling it, | |
4616 | * or we're going to enable U1, account for the U1 max exit latency. | |
4617 | */ | |
4618 | if ((udev->u1_params.timeout != USB3_LPM_DISABLED && !disabling_u1) || | |
4619 | enabling_u1) | |
4620 | u1_mel_us = DIV_ROUND_UP(udev->u1_params.mel, 1000); | |
4621 | if ((udev->u2_params.timeout != USB3_LPM_DISABLED && !disabling_u2) || | |
4622 | enabling_u2) | |
4623 | u2_mel_us = DIV_ROUND_UP(udev->u2_params.mel, 1000); | |
4624 | ||
4625 | if (u1_mel_us > u2_mel_us) | |
4626 | mel_us = u1_mel_us; | |
4627 | else | |
4628 | mel_us = u2_mel_us; | |
4629 | /* xHCI host controller max exit latency field is only 16 bits wide. */ | |
4630 | if (mel_us > MAX_EXIT) { | |
4631 | dev_warn(&udev->dev, "Link PM max exit latency of %lluus " | |
4632 | "is too big.\n", mel_us); | |
4633 | return -E2BIG; | |
4634 | } | |
4635 | return mel_us; | |
4636 | } | |
4637 | ||
4638 | /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */ | |
4639 | int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, | |
4640 | struct usb_device *udev, enum usb3_link_state state) | |
4641 | { | |
4642 | struct xhci_hcd *xhci; | |
4643 | u16 hub_encoded_timeout; | |
4644 | int mel; | |
4645 | int ret; | |
4646 | ||
4647 | xhci = hcd_to_xhci(hcd); | |
4648 | /* The LPM timeout values are pretty host-controller specific, so don't | |
4649 | * enable hub-initiated timeouts unless the vendor has provided | |
4650 | * information about their timeout algorithm. | |
4651 | */ | |
4652 | if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) || | |
4653 | !xhci->devs[udev->slot_id]) | |
4654 | return USB3_LPM_DISABLED; | |
4655 | ||
4656 | hub_encoded_timeout = xhci_calculate_lpm_timeout(hcd, udev, state); | |
4657 | mel = calculate_max_exit_latency(udev, state, hub_encoded_timeout); | |
4658 | if (mel < 0) { | |
4659 | /* Max Exit Latency is too big, disable LPM. */ | |
4660 | hub_encoded_timeout = USB3_LPM_DISABLED; | |
4661 | mel = 0; | |
4662 | } | |
4663 | ||
4664 | ret = xhci_change_max_exit_latency(xhci, udev, mel); | |
4665 | if (ret) | |
4666 | return ret; | |
4667 | return hub_encoded_timeout; | |
4668 | } | |
4669 | ||
4670 | int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, | |
4671 | struct usb_device *udev, enum usb3_link_state state) | |
4672 | { | |
4673 | struct xhci_hcd *xhci; | |
4674 | u16 mel; | |
4675 | int ret; | |
4676 | ||
4677 | xhci = hcd_to_xhci(hcd); | |
4678 | if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) || | |
4679 | !xhci->devs[udev->slot_id]) | |
4680 | return 0; | |
4681 | ||
4682 | mel = calculate_max_exit_latency(udev, state, USB3_LPM_DISABLED); | |
4683 | ret = xhci_change_max_exit_latency(xhci, udev, mel); | |
4684 | if (ret) | |
4685 | return ret; | |
4686 | return 0; | |
4687 | } | |
b01bcbf7 | 4688 | #else /* CONFIG_PM */ |
9574323c | 4689 | |
b01bcbf7 SS |
4690 | int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, |
4691 | struct usb_device *udev, enum usb3_link_state state) | |
65580b43 | 4692 | { |
b01bcbf7 | 4693 | return USB3_LPM_DISABLED; |
65580b43 AX |
4694 | } |
4695 | ||
b01bcbf7 SS |
4696 | int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, |
4697 | struct usb_device *udev, enum usb3_link_state state) | |
9574323c AX |
4698 | { |
4699 | return 0; | |
4700 | } | |
b01bcbf7 | 4701 | #endif /* CONFIG_PM */ |
9574323c | 4702 | |
b01bcbf7 | 4703 | /*-------------------------------------------------------------------------*/ |
9574323c | 4704 | |
ac1c1b7f SS |
4705 | /* Once a hub descriptor is fetched for a device, we need to update the xHC's |
4706 | * internal data structures for the device. | |
4707 | */ | |
4708 | int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, | |
4709 | struct usb_tt *tt, gfp_t mem_flags) | |
4710 | { | |
4711 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
4712 | struct xhci_virt_device *vdev; | |
4713 | struct xhci_command *config_cmd; | |
4714 | struct xhci_input_control_ctx *ctrl_ctx; | |
4715 | struct xhci_slot_ctx *slot_ctx; | |
4716 | unsigned long flags; | |
4717 | unsigned think_time; | |
4718 | int ret; | |
4719 | ||
4720 | /* Ignore root hubs */ | |
4721 | if (!hdev->parent) | |
4722 | return 0; | |
4723 | ||
4724 | vdev = xhci->devs[hdev->slot_id]; | |
4725 | if (!vdev) { | |
4726 | xhci_warn(xhci, "Cannot update hub desc for unknown device.\n"); | |
4727 | return -EINVAL; | |
4728 | } | |
a1d78c16 | 4729 | config_cmd = xhci_alloc_command(xhci, true, true, mem_flags); |
ac1c1b7f SS |
4730 | if (!config_cmd) { |
4731 | xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); | |
4732 | return -ENOMEM; | |
4733 | } | |
92f8e767 SS |
4734 | ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx); |
4735 | if (!ctrl_ctx) { | |
4736 | xhci_warn(xhci, "%s: Could not get input context, bad type.\n", | |
4737 | __func__); | |
4738 | xhci_free_command(xhci, config_cmd); | |
4739 | return -ENOMEM; | |
4740 | } | |
ac1c1b7f SS |
4741 | |
4742 | spin_lock_irqsave(&xhci->lock, flags); | |
839c817c SS |
4743 | if (hdev->speed == USB_SPEED_HIGH && |
4744 | xhci_alloc_tt_info(xhci, vdev, hdev, tt, GFP_ATOMIC)) { | |
4745 | xhci_dbg(xhci, "Could not allocate xHCI TT structure.\n"); | |
4746 | xhci_free_command(xhci, config_cmd); | |
4747 | spin_unlock_irqrestore(&xhci->lock, flags); | |
4748 | return -ENOMEM; | |
4749 | } | |
4750 | ||
ac1c1b7f | 4751 | xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx); |
28ccd296 | 4752 | ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); |
ac1c1b7f | 4753 | slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx); |
28ccd296 | 4754 | slot_ctx->dev_info |= cpu_to_le32(DEV_HUB); |
ac1c1b7f | 4755 | if (tt->multi) |
28ccd296 | 4756 | slot_ctx->dev_info |= cpu_to_le32(DEV_MTT); |
ac1c1b7f SS |
4757 | if (xhci->hci_version > 0x95) { |
4758 | xhci_dbg(xhci, "xHCI version %x needs hub " | |
4759 | "TT think time and number of ports\n", | |
4760 | (unsigned int) xhci->hci_version); | |
28ccd296 | 4761 | slot_ctx->dev_info2 |= cpu_to_le32(XHCI_MAX_PORTS(hdev->maxchild)); |
ac1c1b7f SS |
4762 | /* Set TT think time - convert from ns to FS bit times. |
4763 | * 0 = 8 FS bit times, 1 = 16 FS bit times, | |
4764 | * 2 = 24 FS bit times, 3 = 32 FS bit times. | |
700b4173 AX |
4765 | * |
4766 | * xHCI 1.0: this field shall be 0 if the device is not a | |
4767 | * High-spped hub. | |
ac1c1b7f SS |
4768 | */ |
4769 | think_time = tt->think_time; | |
4770 | if (think_time != 0) | |
4771 | think_time = (think_time / 666) - 1; | |
700b4173 AX |
4772 | if (xhci->hci_version < 0x100 || hdev->speed == USB_SPEED_HIGH) |
4773 | slot_ctx->tt_info |= | |
4774 | cpu_to_le32(TT_THINK_TIME(think_time)); | |
ac1c1b7f SS |
4775 | } else { |
4776 | xhci_dbg(xhci, "xHCI version %x doesn't need hub " | |
4777 | "TT think time or number of ports\n", | |
4778 | (unsigned int) xhci->hci_version); | |
4779 | } | |
4780 | slot_ctx->dev_state = 0; | |
4781 | spin_unlock_irqrestore(&xhci->lock, flags); | |
4782 | ||
4783 | xhci_dbg(xhci, "Set up %s for hub device.\n", | |
4784 | (xhci->hci_version > 0x95) ? | |
4785 | "configure endpoint" : "evaluate context"); | |
4786 | xhci_dbg(xhci, "Slot %u Input Context:\n", hdev->slot_id); | |
4787 | xhci_dbg_ctx(xhci, config_cmd->in_ctx, 0); | |
4788 | ||
4789 | /* Issue and wait for the configure endpoint or | |
4790 | * evaluate context command. | |
4791 | */ | |
4792 | if (xhci->hci_version > 0x95) | |
4793 | ret = xhci_configure_endpoint(xhci, hdev, config_cmd, | |
4794 | false, false); | |
4795 | else | |
4796 | ret = xhci_configure_endpoint(xhci, hdev, config_cmd, | |
4797 | true, false); | |
4798 | ||
4799 | xhci_dbg(xhci, "Slot %u Output Context:\n", hdev->slot_id); | |
4800 | xhci_dbg_ctx(xhci, vdev->out_ctx, 0); | |
4801 | ||
4802 | xhci_free_command(xhci, config_cmd); | |
4803 | return ret; | |
4804 | } | |
4805 | ||
66d4eadd SS |
4806 | int xhci_get_frame(struct usb_hcd *hcd) |
4807 | { | |
4808 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); | |
4809 | /* EHCI mods by the periodic size. Why? */ | |
b0ba9720 | 4810 | return readl(&xhci->run_regs->microframe_index) >> 3; |
66d4eadd SS |
4811 | } |
4812 | ||
552e0c4f SAS |
4813 | int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) |
4814 | { | |
4815 | struct xhci_hcd *xhci; | |
4816 | struct device *dev = hcd->self.controller; | |
4817 | int retval; | |
552e0c4f | 4818 | |
1386ff75 SS |
4819 | /* Accept arbitrarily long scatter-gather lists */ |
4820 | hcd->self.sg_tablesize = ~0; | |
fc76051c | 4821 | |
e2ed5114 MN |
4822 | /* support to build packet from discontinuous buffers */ |
4823 | hcd->self.no_sg_constraint = 1; | |
4824 | ||
19181bc5 HG |
4825 | /* XHCI controllers don't stop the ep queue on short packets :| */ |
4826 | hcd->self.no_stop_on_short = 1; | |
552e0c4f SAS |
4827 | |
4828 | if (usb_hcd_is_primary_hcd(hcd)) { | |
4829 | xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); | |
4830 | if (!xhci) | |
4831 | return -ENOMEM; | |
4832 | *((struct xhci_hcd **) hcd->hcd_priv) = xhci; | |
4833 | xhci->main_hcd = hcd; | |
4834 | /* Mark the first roothub as being USB 2.0. | |
4835 | * The xHCI driver will register the USB 3.0 roothub. | |
4836 | */ | |
4837 | hcd->speed = HCD_USB2; | |
4838 | hcd->self.root_hub->speed = USB_SPEED_HIGH; | |
4839 | /* | |
4840 | * USB 2.0 roothub under xHCI has an integrated TT, | |
4841 | * (rate matching hub) as opposed to having an OHCI/UHCI | |
4842 | * companion controller. | |
4843 | */ | |
4844 | hcd->has_tt = 1; | |
4845 | } else { | |
4846 | /* xHCI private pointer was set in xhci_pci_probe for the second | |
4847 | * registered roothub. | |
4848 | */ | |
552e0c4f SAS |
4849 | return 0; |
4850 | } | |
4851 | ||
4852 | xhci->cap_regs = hcd->regs; | |
4853 | xhci->op_regs = hcd->regs + | |
b0ba9720 | 4854 | HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); |
552e0c4f | 4855 | xhci->run_regs = hcd->regs + |
b0ba9720 | 4856 | (readl(&xhci->cap_regs->run_regs_off) & RTSOFF_MASK); |
552e0c4f | 4857 | /* Cache read-only capability registers */ |
b0ba9720 XR |
4858 | xhci->hcs_params1 = readl(&xhci->cap_regs->hcs_params1); |
4859 | xhci->hcs_params2 = readl(&xhci->cap_regs->hcs_params2); | |
4860 | xhci->hcs_params3 = readl(&xhci->cap_regs->hcs_params3); | |
4861 | xhci->hcc_params = readl(&xhci->cap_regs->hc_capbase); | |
552e0c4f | 4862 | xhci->hci_version = HC_VERSION(xhci->hcc_params); |
b0ba9720 | 4863 | xhci->hcc_params = readl(&xhci->cap_regs->hcc_params); |
552e0c4f SAS |
4864 | xhci_print_registers(xhci); |
4865 | ||
4e6a1ee7 TI |
4866 | xhci->quirks = quirks; |
4867 | ||
552e0c4f SAS |
4868 | get_quirks(dev, xhci); |
4869 | ||
07f3cb7c GC |
4870 | /* In xhci controllers which follow xhci 1.0 spec gives a spurious |
4871 | * success event after a short transfer. This quirk will ignore such | |
4872 | * spurious event. | |
4873 | */ | |
4874 | if (xhci->hci_version > 0x96) | |
4875 | xhci->quirks |= XHCI_SPURIOUS_SUCCESS; | |
4876 | ||
552e0c4f SAS |
4877 | /* Make sure the HC is halted. */ |
4878 | retval = xhci_halt(xhci); | |
4879 | if (retval) | |
4880 | goto error; | |
4881 | ||
4882 | xhci_dbg(xhci, "Resetting HCD\n"); | |
4883 | /* Reset the internal HC memory state and registers. */ | |
4884 | retval = xhci_reset(xhci); | |
4885 | if (retval) | |
4886 | goto error; | |
4887 | xhci_dbg(xhci, "Reset complete\n"); | |
4888 | ||
c10cf118 XR |
4889 | /* Set dma_mask and coherent_dma_mask to 64-bits, |
4890 | * if xHC supports 64-bit addressing */ | |
4891 | if (HCC_64BIT_ADDR(xhci->hcc_params) && | |
4892 | !dma_set_mask(dev, DMA_BIT_MASK(64))) { | |
552e0c4f | 4893 | xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); |
c10cf118 | 4894 | dma_set_coherent_mask(dev, DMA_BIT_MASK(64)); |
552e0c4f SAS |
4895 | } |
4896 | ||
4897 | xhci_dbg(xhci, "Calling HCD init\n"); | |
4898 | /* Initialize HCD and host controller data structures. */ | |
4899 | retval = xhci_init(hcd); | |
4900 | if (retval) | |
4901 | goto error; | |
4902 | xhci_dbg(xhci, "Called HCD init\n"); | |
4903 | return 0; | |
4904 | error: | |
4905 | kfree(xhci); | |
4906 | return retval; | |
4907 | } | |
436e8c7d | 4908 | EXPORT_SYMBOL_GPL(xhci_gen_setup); |
552e0c4f | 4909 | |
1885d9a3 AB |
4910 | static const struct hc_driver xhci_hc_driver = { |
4911 | .description = "xhci-hcd", | |
4912 | .product_desc = "xHCI Host Controller", | |
4913 | .hcd_priv_size = sizeof(struct xhci_hcd *), | |
4914 | ||
4915 | /* | |
4916 | * generic hardware linkage | |
4917 | */ | |
4918 | .irq = xhci_irq, | |
4919 | .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED, | |
4920 | ||
4921 | /* | |
4922 | * basic lifecycle operations | |
4923 | */ | |
4924 | .reset = NULL, /* set in xhci_init_driver() */ | |
4925 | .start = xhci_run, | |
4926 | .stop = xhci_stop, | |
4927 | .shutdown = xhci_shutdown, | |
4928 | ||
4929 | /* | |
4930 | * managing i/o requests and associated device resources | |
4931 | */ | |
4932 | .urb_enqueue = xhci_urb_enqueue, | |
4933 | .urb_dequeue = xhci_urb_dequeue, | |
4934 | .alloc_dev = xhci_alloc_dev, | |
4935 | .free_dev = xhci_free_dev, | |
4936 | .alloc_streams = xhci_alloc_streams, | |
4937 | .free_streams = xhci_free_streams, | |
4938 | .add_endpoint = xhci_add_endpoint, | |
4939 | .drop_endpoint = xhci_drop_endpoint, | |
4940 | .endpoint_reset = xhci_endpoint_reset, | |
4941 | .check_bandwidth = xhci_check_bandwidth, | |
4942 | .reset_bandwidth = xhci_reset_bandwidth, | |
4943 | .address_device = xhci_address_device, | |
4944 | .enable_device = xhci_enable_device, | |
4945 | .update_hub_device = xhci_update_hub_device, | |
4946 | .reset_device = xhci_discover_or_reset_device, | |
4947 | ||
4948 | /* | |
4949 | * scheduling support | |
4950 | */ | |
4951 | .get_frame_number = xhci_get_frame, | |
4952 | ||
4953 | /* | |
4954 | * root hub support | |
4955 | */ | |
4956 | .hub_control = xhci_hub_control, | |
4957 | .hub_status_data = xhci_hub_status_data, | |
4958 | .bus_suspend = xhci_bus_suspend, | |
4959 | .bus_resume = xhci_bus_resume, | |
4960 | ||
4961 | /* | |
4962 | * call back when device connected and addressed | |
4963 | */ | |
4964 | .update_device = xhci_update_device, | |
4965 | .set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm, | |
4966 | .enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout, | |
4967 | .disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout, | |
4968 | .find_raw_port_number = xhci_find_raw_port_number, | |
4969 | }; | |
4970 | ||
4971 | void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *)) | |
4972 | { | |
4973 | BUG_ON(!setup_fn); | |
4974 | *drv = xhci_hc_driver; | |
4975 | drv->reset = setup_fn; | |
4976 | } | |
4977 | EXPORT_SYMBOL_GPL(xhci_init_driver); | |
4978 | ||
66d4eadd SS |
4979 | MODULE_DESCRIPTION(DRIVER_DESC); |
4980 | MODULE_AUTHOR(DRIVER_AUTHOR); | |
4981 | MODULE_LICENSE("GPL"); | |
4982 | ||
4983 | static int __init xhci_hcd_init(void) | |
4984 | { | |
98441973 SS |
4985 | /* |
4986 | * Check the compiler generated sizes of structures that must be laid | |
4987 | * out in specific ways for hardware access. | |
4988 | */ | |
4989 | BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8); | |
4990 | BUILD_BUG_ON(sizeof(struct xhci_slot_ctx) != 8*32/8); | |
4991 | BUILD_BUG_ON(sizeof(struct xhci_ep_ctx) != 8*32/8); | |
4992 | /* xhci_device_control has eight fields, and also | |
4993 | * embeds one xhci_slot_ctx and 31 xhci_ep_ctx | |
4994 | */ | |
98441973 SS |
4995 | BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8); |
4996 | BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8); | |
4997 | BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8); | |
4998 | BUILD_BUG_ON(sizeof(struct xhci_cap_regs) != 7*32/8); | |
4999 | BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8); | |
5000 | /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */ | |
5001 | BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); | |
66d4eadd SS |
5002 | return 0; |
5003 | } | |
5004 | module_init(xhci_hcd_init); |