Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * OHCI HCD (Host Controller Driver) for USB. | |
3 | * | |
4 | * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> | |
5 | * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net> | |
dd9048af | 6 | * |
1da177e4 LT |
7 | * [ Initialisation is based on Linus' ] |
8 | * [ uhci code and gregs ohci fragments ] | |
9 | * [ (C) Copyright 1999 Linus Torvalds ] | |
10 | * [ (C) Copyright 1999 Gregory P. Smith] | |
dd9048af DB |
11 | * |
12 | * | |
1da177e4 LT |
13 | * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller |
14 | * interfaces (though some non-x86 Intel chips use it). It supports | |
15 | * smarter hardware than UHCI. A download link for the spec available | |
16 | * through the http://www.usb.org website. | |
17 | * | |
1da177e4 LT |
18 | * This file is licenced under the GPL. |
19 | */ | |
dd9048af | 20 | |
1da177e4 LT |
21 | #include <linux/module.h> |
22 | #include <linux/moduleparam.h> | |
23 | #include <linux/pci.h> | |
24 | #include <linux/kernel.h> | |
25 | #include <linux/delay.h> | |
26 | #include <linux/ioport.h> | |
27 | #include <linux/sched.h> | |
28 | #include <linux/slab.h> | |
1da177e4 LT |
29 | #include <linux/errno.h> |
30 | #include <linux/init.h> | |
31 | #include <linux/timer.h> | |
32 | #include <linux/list.h> | |
1da177e4 | 33 | #include <linux/usb.h> |
3a16f7b4 | 34 | #include <linux/usb/otg.h> |
dd9048af | 35 | #include <linux/dma-mapping.h> |
f4df0e33 DB |
36 | #include <linux/dmapool.h> |
37 | #include <linux/reboot.h> | |
d576bb9f | 38 | #include <linux/workqueue.h> |
684c19e0 | 39 | #include <linux/debugfs.h> |
1da177e4 LT |
40 | |
41 | #include <asm/io.h> | |
42 | #include <asm/irq.h> | |
43 | #include <asm/system.h> | |
44 | #include <asm/unaligned.h> | |
45 | #include <asm/byteorder.h> | |
46 | ||
f4df0e33 | 47 | #include "../core/hcd.h" |
1da177e4 | 48 | |
1da177e4 LT |
49 | #define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell" |
50 | #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver" | |
51 | ||
52 | /*-------------------------------------------------------------------------*/ | |
53 | ||
8de98402 | 54 | #undef OHCI_VERBOSE_DEBUG /* not always helpful */ |
1da177e4 LT |
55 | |
56 | /* For initializing controller (mask in an HCFS mode too) */ | |
d413984a | 57 | #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR |
1da177e4 | 58 | #define OHCI_INTR_INIT \ |
d413984a DB |
59 | (OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \ |
60 | | OHCI_INTR_RD | OHCI_INTR_WDH) | |
1da177e4 LT |
61 | |
62 | #ifdef __hppa__ | |
63 | /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */ | |
64 | #define IR_DISABLE | |
65 | #endif | |
66 | ||
67 | #ifdef CONFIG_ARCH_OMAP | |
68 | /* OMAP doesn't support IR (no SMM; not needed) */ | |
69 | #define IR_DISABLE | |
70 | #endif | |
71 | ||
72 | /*-------------------------------------------------------------------------*/ | |
73 | ||
74 | static const char hcd_name [] = "ohci_hcd"; | |
75 | ||
d413984a DB |
76 | #define STATECHANGE_DELAY msecs_to_jiffies(300) |
77 | ||
1da177e4 LT |
78 | #include "ohci.h" |
79 | ||
80 | static void ohci_dump (struct ohci_hcd *ohci, int verbose); | |
81 | static int ohci_init (struct ohci_hcd *ohci); | |
82 | static void ohci_stop (struct usb_hcd *hcd); | |
da6fb570 DB |
83 | |
84 | #if defined(CONFIG_PM) || defined(CONFIG_PCI) | |
d576bb9f | 85 | static int ohci_restart (struct ohci_hcd *ohci); |
da6fb570 | 86 | #endif |
1da177e4 | 87 | |
ab1666c1 LY |
88 | #ifdef CONFIG_PCI |
89 | static void quirk_amd_pll(int state); | |
90 | static void amd_iso_dev_put(void); | |
91 | #else | |
92 | static inline void quirk_amd_pll(int state) | |
93 | { | |
94 | return; | |
95 | } | |
96 | static inline void amd_iso_dev_put(void) | |
97 | { | |
98 | return; | |
99 | } | |
100 | #endif | |
101 | ||
102 | ||
1da177e4 LT |
103 | #include "ohci-hub.c" |
104 | #include "ohci-dbg.c" | |
105 | #include "ohci-mem.c" | |
106 | #include "ohci-q.c" | |
107 | ||
108 | ||
109 | /* | |
110 | * On architectures with edge-triggered interrupts we must never return | |
111 | * IRQ_NONE. | |
112 | */ | |
113 | #if defined(CONFIG_SA1111) /* ... or other edge-triggered systems */ | |
114 | #define IRQ_NOTMINE IRQ_HANDLED | |
115 | #else | |
116 | #define IRQ_NOTMINE IRQ_NONE | |
117 | #endif | |
118 | ||
119 | ||
120 | /* Some boards misreport power switching/overcurrent */ | |
121 | static int distrust_firmware = 1; | |
122 | module_param (distrust_firmware, bool, 0); | |
123 | MODULE_PARM_DESC (distrust_firmware, | |
124 | "true to distrust firmware power/overcurrent setup"); | |
125 | ||
126 | /* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */ | |
127 | static int no_handshake = 0; | |
128 | module_param (no_handshake, bool, 0); | |
129 | MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake"); | |
130 | ||
131 | /*-------------------------------------------------------------------------*/ | |
132 | ||
133 | /* | |
134 | * queue up an urb for anything except the root hub | |
135 | */ | |
136 | static int ohci_urb_enqueue ( | |
137 | struct usb_hcd *hcd, | |
1da177e4 | 138 | struct urb *urb, |
55016f10 | 139 | gfp_t mem_flags |
1da177e4 LT |
140 | ) { |
141 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
142 | struct ed *ed; | |
143 | urb_priv_t *urb_priv; | |
144 | unsigned int pipe = urb->pipe; | |
145 | int i, size = 0; | |
146 | unsigned long flags; | |
147 | int retval = 0; | |
dd9048af | 148 | |
1da177e4 | 149 | #ifdef OHCI_VERBOSE_DEBUG |
55d84968 | 150 | urb_print(urb, "SUB", usb_pipein(pipe), -EINPROGRESS); |
1da177e4 | 151 | #endif |
dd9048af | 152 | |
1da177e4 | 153 | /* every endpoint has a ed, locate and maybe (re)initialize it */ |
e9df41c5 | 154 | if (! (ed = ed_get (ohci, urb->ep, urb->dev, pipe, urb->interval))) |
1da177e4 LT |
155 | return -ENOMEM; |
156 | ||
157 | /* for the private part of the URB we need the number of TDs (size) */ | |
158 | switch (ed->type) { | |
159 | case PIPE_CONTROL: | |
160 | /* td_submit_urb() doesn't yet handle these */ | |
161 | if (urb->transfer_buffer_length > 4096) | |
162 | return -EMSGSIZE; | |
163 | ||
164 | /* 1 TD for setup, 1 for ACK, plus ... */ | |
165 | size = 2; | |
166 | /* FALLTHROUGH */ | |
167 | // case PIPE_INTERRUPT: | |
168 | // case PIPE_BULK: | |
169 | default: | |
170 | /* one TD for every 4096 Bytes (can be upto 8K) */ | |
171 | size += urb->transfer_buffer_length / 4096; | |
172 | /* ... and for any remaining bytes ... */ | |
173 | if ((urb->transfer_buffer_length % 4096) != 0) | |
174 | size++; | |
175 | /* ... and maybe a zero length packet to wrap it up */ | |
176 | if (size == 0) | |
177 | size++; | |
178 | else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 | |
179 | && (urb->transfer_buffer_length | |
180 | % usb_maxpacket (urb->dev, pipe, | |
181 | usb_pipeout (pipe))) == 0) | |
182 | size++; | |
183 | break; | |
184 | case PIPE_ISOCHRONOUS: /* number of packets from URB */ | |
185 | size = urb->number_of_packets; | |
186 | break; | |
187 | } | |
188 | ||
189 | /* allocate the private part of the URB */ | |
dd00cc48 | 190 | urb_priv = kzalloc (sizeof (urb_priv_t) + size * sizeof (struct td *), |
1da177e4 LT |
191 | mem_flags); |
192 | if (!urb_priv) | |
193 | return -ENOMEM; | |
1da177e4 LT |
194 | INIT_LIST_HEAD (&urb_priv->pending); |
195 | urb_priv->length = size; | |
dd9048af | 196 | urb_priv->ed = ed; |
1da177e4 LT |
197 | |
198 | /* allocate the TDs (deferring hash chain updates) */ | |
199 | for (i = 0; i < size; i++) { | |
200 | urb_priv->td [i] = td_alloc (ohci, mem_flags); | |
201 | if (!urb_priv->td [i]) { | |
202 | urb_priv->length = i; | |
203 | urb_free_priv (ohci, urb_priv); | |
204 | return -ENOMEM; | |
205 | } | |
dd9048af | 206 | } |
1da177e4 LT |
207 | |
208 | spin_lock_irqsave (&ohci->lock, flags); | |
209 | ||
210 | /* don't submit to a dead HC */ | |
8de98402 BH |
211 | if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { |
212 | retval = -ENODEV; | |
213 | goto fail; | |
214 | } | |
1da177e4 LT |
215 | if (!HC_IS_RUNNING(hcd->state)) { |
216 | retval = -ENODEV; | |
217 | goto fail; | |
218 | } | |
e9df41c5 AS |
219 | retval = usb_hcd_link_urb_to_ep(hcd, urb); |
220 | if (retval) | |
1da177e4 | 221 | goto fail; |
1da177e4 LT |
222 | |
223 | /* schedule the ed if needed */ | |
224 | if (ed->state == ED_IDLE) { | |
225 | retval = ed_schedule (ohci, ed); | |
e9df41c5 AS |
226 | if (retval < 0) { |
227 | usb_hcd_unlink_urb_from_ep(hcd, urb); | |
228 | goto fail; | |
229 | } | |
1da177e4 LT |
230 | if (ed->type == PIPE_ISOCHRONOUS) { |
231 | u16 frame = ohci_frame_no(ohci); | |
232 | ||
233 | /* delay a few frames before the first TD */ | |
234 | frame += max_t (u16, 8, ed->interval); | |
235 | frame &= ~(ed->interval - 1); | |
236 | frame |= ed->branch; | |
237 | urb->start_frame = frame; | |
238 | ||
239 | /* yes, only URB_ISO_ASAP is supported, and | |
240 | * urb->start_frame is never used as input. | |
241 | */ | |
242 | } | |
243 | } else if (ed->type == PIPE_ISOCHRONOUS) | |
244 | urb->start_frame = ed->last_iso + ed->interval; | |
245 | ||
246 | /* fill the TDs and link them to the ed; and | |
247 | * enable that part of the schedule, if needed | |
248 | * and update count of queued periodic urbs | |
249 | */ | |
250 | urb->hcpriv = urb_priv; | |
251 | td_submit_urb (ohci, urb); | |
252 | ||
1da177e4 LT |
253 | fail: |
254 | if (retval) | |
255 | urb_free_priv (ohci, urb_priv); | |
256 | spin_unlock_irqrestore (&ohci->lock, flags); | |
257 | return retval; | |
258 | } | |
259 | ||
260 | /* | |
55d84968 AS |
261 | * decouple the URB from the HC queues (TDs, urb_priv). |
262 | * reporting is always done | |
1da177e4 LT |
263 | * asynchronously, and we might be dealing with an urb that's |
264 | * partially transferred, or an ED with other urbs being unlinked. | |
265 | */ | |
e9df41c5 | 266 | static int ohci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) |
1da177e4 LT |
267 | { |
268 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
269 | unsigned long flags; | |
e9df41c5 | 270 | int rc; |
dd9048af | 271 | |
1da177e4 | 272 | #ifdef OHCI_VERBOSE_DEBUG |
55d84968 | 273 | urb_print(urb, "UNLINK", 1, status); |
dd9048af | 274 | #endif |
1da177e4 LT |
275 | |
276 | spin_lock_irqsave (&ohci->lock, flags); | |
e9df41c5 AS |
277 | rc = usb_hcd_check_unlink_urb(hcd, urb, status); |
278 | if (rc) { | |
279 | ; /* Do nothing */ | |
280 | } else if (HC_IS_RUNNING(hcd->state)) { | |
1da177e4 LT |
281 | urb_priv_t *urb_priv; |
282 | ||
283 | /* Unless an IRQ completed the unlink while it was being | |
284 | * handed to us, flag it for unlink and giveback, and force | |
285 | * some upcoming INTR_SF to call finish_unlinks() | |
286 | */ | |
287 | urb_priv = urb->hcpriv; | |
288 | if (urb_priv) { | |
289 | if (urb_priv->ed->state == ED_OPER) | |
290 | start_ed_unlink (ohci, urb_priv->ed); | |
291 | } | |
292 | } else { | |
293 | /* | |
294 | * with HC dead, we won't respect hc queue pointers | |
295 | * any more ... just clean up every urb's memory. | |
296 | */ | |
297 | if (urb->hcpriv) | |
55d84968 | 298 | finish_urb(ohci, urb, status); |
1da177e4 LT |
299 | } |
300 | spin_unlock_irqrestore (&ohci->lock, flags); | |
e9df41c5 | 301 | return rc; |
1da177e4 LT |
302 | } |
303 | ||
304 | /*-------------------------------------------------------------------------*/ | |
305 | ||
306 | /* frees config/altsetting state for endpoints, | |
307 | * including ED memory, dummy TD, and bulk/intr data toggle | |
308 | */ | |
309 | ||
310 | static void | |
311 | ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep) | |
312 | { | |
313 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
314 | unsigned long flags; | |
315 | struct ed *ed = ep->hcpriv; | |
316 | unsigned limit = 1000; | |
317 | ||
318 | /* ASSERT: any requests/urbs are being unlinked */ | |
319 | /* ASSERT: nobody can be submitting urbs for this any more */ | |
320 | ||
321 | if (!ed) | |
322 | return; | |
323 | ||
324 | rescan: | |
325 | spin_lock_irqsave (&ohci->lock, flags); | |
326 | ||
327 | if (!HC_IS_RUNNING (hcd->state)) { | |
328 | sanitize: | |
329 | ed->state = ED_IDLE; | |
89a0fd18 MN |
330 | if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT) |
331 | ohci->eds_scheduled--; | |
7d12e780 | 332 | finish_unlinks (ohci, 0); |
1da177e4 LT |
333 | } |
334 | ||
335 | switch (ed->state) { | |
336 | case ED_UNLINK: /* wait for hw to finish? */ | |
337 | /* major IRQ delivery trouble loses INTR_SF too... */ | |
338 | if (limit-- == 0) { | |
89a0fd18 MN |
339 | ohci_warn(ohci, "ED unlink timeout\n"); |
340 | if (quirk_zfmicro(ohci)) { | |
341 | ohci_warn(ohci, "Attempting ZF TD recovery\n"); | |
342 | ohci->ed_to_check = ed; | |
343 | ohci->zf_delay = 2; | |
344 | } | |
1da177e4 LT |
345 | goto sanitize; |
346 | } | |
347 | spin_unlock_irqrestore (&ohci->lock, flags); | |
22c43863 | 348 | schedule_timeout_uninterruptible(1); |
1da177e4 LT |
349 | goto rescan; |
350 | case ED_IDLE: /* fully unlinked */ | |
351 | if (list_empty (&ed->td_list)) { | |
352 | td_free (ohci, ed->dummy); | |
353 | ed_free (ohci, ed); | |
354 | break; | |
355 | } | |
356 | /* else FALL THROUGH */ | |
357 | default: | |
358 | /* caller was supposed to have unlinked any requests; | |
359 | * that's not our job. can't recover; must leak ed. | |
360 | */ | |
361 | ohci_err (ohci, "leak ed %p (#%02x) state %d%s\n", | |
362 | ed, ep->desc.bEndpointAddress, ed->state, | |
363 | list_empty (&ed->td_list) ? "" : " (has tds)"); | |
364 | td_free (ohci, ed->dummy); | |
365 | break; | |
366 | } | |
367 | ep->hcpriv = NULL; | |
368 | spin_unlock_irqrestore (&ohci->lock, flags); | |
369 | return; | |
370 | } | |
371 | ||
372 | static int ohci_get_frame (struct usb_hcd *hcd) | |
373 | { | |
374 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
375 | ||
376 | return ohci_frame_no(ohci); | |
377 | } | |
378 | ||
379 | static void ohci_usb_reset (struct ohci_hcd *ohci) | |
380 | { | |
381 | ohci->hc_control = ohci_readl (ohci, &ohci->regs->control); | |
382 | ohci->hc_control &= OHCI_CTRL_RWC; | |
383 | ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); | |
384 | } | |
385 | ||
64a21d02 | 386 | /* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and |
f4df0e33 DB |
387 | * other cases where the next software may expect clean state from the |
388 | * "firmware". this is bus-neutral, unlike shutdown() methods. | |
389 | */ | |
64a21d02 AG |
390 | static void |
391 | ohci_shutdown (struct usb_hcd *hcd) | |
f4df0e33 DB |
392 | { |
393 | struct ohci_hcd *ohci; | |
394 | ||
64a21d02 | 395 | ohci = hcd_to_ohci (hcd); |
f4df0e33 DB |
396 | ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); |
397 | ohci_usb_reset (ohci); | |
398 | /* flush the writes */ | |
399 | (void) ohci_readl (ohci, &ohci->regs->control); | |
f4df0e33 DB |
400 | } |
401 | ||
89a0fd18 MN |
402 | static int check_ed(struct ohci_hcd *ohci, struct ed *ed) |
403 | { | |
404 | return (hc32_to_cpu(ohci, ed->hwINFO) & ED_IN) != 0 | |
405 | && (hc32_to_cpu(ohci, ed->hwHeadP) & TD_MASK) | |
406 | == (hc32_to_cpu(ohci, ed->hwTailP) & TD_MASK) | |
407 | && !list_empty(&ed->td_list); | |
408 | } | |
409 | ||
410 | /* ZF Micro watchdog timer callback. The ZF Micro chipset sometimes completes | |
411 | * an interrupt TD but neglects to add it to the donelist. On systems with | |
412 | * this chipset, we need to periodically check the state of the queues to look | |
413 | * for such "lost" TDs. | |
414 | */ | |
415 | static void unlink_watchdog_func(unsigned long _ohci) | |
416 | { | |
da6fb570 | 417 | unsigned long flags; |
89a0fd18 MN |
418 | unsigned max; |
419 | unsigned seen_count = 0; | |
420 | unsigned i; | |
421 | struct ed **seen = NULL; | |
422 | struct ohci_hcd *ohci = (struct ohci_hcd *) _ohci; | |
423 | ||
424 | spin_lock_irqsave(&ohci->lock, flags); | |
425 | max = ohci->eds_scheduled; | |
426 | if (!max) | |
427 | goto done; | |
428 | ||
429 | if (ohci->ed_to_check) | |
430 | goto out; | |
431 | ||
432 | seen = kcalloc(max, sizeof *seen, GFP_ATOMIC); | |
433 | if (!seen) | |
434 | goto out; | |
435 | ||
436 | for (i = 0; i < NUM_INTS; i++) { | |
437 | struct ed *ed = ohci->periodic[i]; | |
438 | ||
439 | while (ed) { | |
440 | unsigned temp; | |
441 | ||
442 | /* scan this branch of the periodic schedule tree */ | |
443 | for (temp = 0; temp < seen_count; temp++) { | |
444 | if (seen[temp] == ed) { | |
445 | /* we've checked it and what's after */ | |
446 | ed = NULL; | |
447 | break; | |
448 | } | |
449 | } | |
450 | if (!ed) | |
451 | break; | |
452 | seen[seen_count++] = ed; | |
453 | if (!check_ed(ohci, ed)) { | |
454 | ed = ed->ed_next; | |
455 | continue; | |
456 | } | |
457 | ||
458 | /* HC's TD list is empty, but HCD sees at least one | |
459 | * TD that's not been sent through the donelist. | |
460 | */ | |
461 | ohci->ed_to_check = ed; | |
462 | ohci->zf_delay = 2; | |
463 | ||
464 | /* The HC may wait until the next frame to report the | |
465 | * TD as done through the donelist and INTR_WDH. (We | |
466 | * just *assume* it's not a multi-TD interrupt URB; | |
467 | * those could defer the IRQ more than one frame, using | |
468 | * DI...) Check again after the next INTR_SF. | |
469 | */ | |
470 | ohci_writel(ohci, OHCI_INTR_SF, | |
471 | &ohci->regs->intrstatus); | |
472 | ohci_writel(ohci, OHCI_INTR_SF, | |
473 | &ohci->regs->intrenable); | |
474 | ||
475 | /* flush those writes */ | |
476 | (void) ohci_readl(ohci, &ohci->regs->control); | |
477 | ||
478 | goto out; | |
479 | } | |
480 | } | |
481 | out: | |
482 | kfree(seen); | |
483 | if (ohci->eds_scheduled) | |
9cebcdc7 | 484 | mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ)); |
89a0fd18 MN |
485 | done: |
486 | spin_unlock_irqrestore(&ohci->lock, flags); | |
487 | } | |
488 | ||
1da177e4 LT |
489 | /*-------------------------------------------------------------------------* |
490 | * HC functions | |
491 | *-------------------------------------------------------------------------*/ | |
492 | ||
493 | /* init memory, and kick BIOS/SMM off */ | |
494 | ||
495 | static int ohci_init (struct ohci_hcd *ohci) | |
496 | { | |
497 | int ret; | |
6a9062f3 | 498 | struct usb_hcd *hcd = ohci_to_hcd(ohci); |
1da177e4 | 499 | |
1133cd8a DB |
500 | if (distrust_firmware) |
501 | ohci->flags |= OHCI_QUIRK_HUB_POWER; | |
502 | ||
1da177e4 | 503 | disable (ohci); |
6a9062f3 | 504 | ohci->regs = hcd->regs; |
1da177e4 | 505 | |
6a9062f3 DB |
506 | /* REVISIT this BIOS handshake is now moved into PCI "quirks", and |
507 | * was never needed for most non-PCI systems ... remove the code? | |
508 | */ | |
509 | ||
1da177e4 LT |
510 | #ifndef IR_DISABLE |
511 | /* SMM owns the HC? not for long! */ | |
512 | if (!no_handshake && ohci_readl (ohci, | |
513 | &ohci->regs->control) & OHCI_CTRL_IR) { | |
514 | u32 temp; | |
515 | ||
516 | ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n"); | |
517 | ||
518 | /* this timeout is arbitrary. we make it long, so systems | |
519 | * depending on usb keyboards may be usable even if the | |
520 | * BIOS/SMM code seems pretty broken. | |
521 | */ | |
522 | temp = 500; /* arbitrary: five seconds */ | |
523 | ||
524 | ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable); | |
525 | ohci_writel (ohci, OHCI_OCR, &ohci->regs->cmdstatus); | |
526 | while (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_IR) { | |
527 | msleep (10); | |
528 | if (--temp == 0) { | |
529 | ohci_err (ohci, "USB HC takeover failed!" | |
530 | " (BIOS/SMM bug)\n"); | |
531 | return -EBUSY; | |
532 | } | |
533 | } | |
534 | ohci_usb_reset (ohci); | |
535 | } | |
536 | #endif | |
537 | ||
538 | /* Disable HC interrupts */ | |
539 | ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); | |
6a9062f3 DB |
540 | |
541 | /* flush the writes, and save key bits like RWC */ | |
542 | if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC) | |
543 | ohci->hc_control |= OHCI_CTRL_RWC; | |
1da177e4 | 544 | |
fdd13b36 DB |
545 | /* Read the number of ports unless overridden */ |
546 | if (ohci->num_ports == 0) | |
547 | ohci->num_ports = roothub_a(ohci) & RH_A_NDP; | |
548 | ||
1da177e4 LT |
549 | if (ohci->hcca) |
550 | return 0; | |
551 | ||
6a9062f3 | 552 | ohci->hcca = dma_alloc_coherent (hcd->self.controller, |
1da177e4 LT |
553 | sizeof *ohci->hcca, &ohci->hcca_dma, 0); |
554 | if (!ohci->hcca) | |
555 | return -ENOMEM; | |
556 | ||
557 | if ((ret = ohci_mem_init (ohci)) < 0) | |
6a9062f3 DB |
558 | ohci_stop (hcd); |
559 | else { | |
6a9062f3 DB |
560 | create_debug_files (ohci); |
561 | } | |
1da177e4 LT |
562 | |
563 | return ret; | |
1da177e4 LT |
564 | } |
565 | ||
566 | /*-------------------------------------------------------------------------*/ | |
567 | ||
568 | /* Start an OHCI controller, set the BUS operational | |
569 | * resets USB and controller | |
dd9048af | 570 | * enable interrupts |
1da177e4 LT |
571 | */ |
572 | static int ohci_run (struct ohci_hcd *ohci) | |
573 | { | |
dd9048af | 574 | u32 mask, temp; |
1da177e4 | 575 | int first = ohci->fminterval == 0; |
6a9062f3 | 576 | struct usb_hcd *hcd = ohci_to_hcd(ohci); |
1da177e4 LT |
577 | |
578 | disable (ohci); | |
579 | ||
580 | /* boot firmware should have set this up (5.1.1.3.1) */ | |
581 | if (first) { | |
582 | ||
583 | temp = ohci_readl (ohci, &ohci->regs->fminterval); | |
584 | ohci->fminterval = temp & 0x3fff; | |
585 | if (ohci->fminterval != FI) | |
586 | ohci_dbg (ohci, "fminterval delta %d\n", | |
587 | ohci->fminterval - FI); | |
588 | ohci->fminterval |= FSMP (ohci->fminterval) << 16; | |
589 | /* also: power/overcurrent flags in roothub.a */ | |
590 | } | |
591 | ||
6fd9086a AS |
592 | /* Reset USB nearly "by the book". RemoteWakeupConnected has |
593 | * to be checked in case boot firmware (BIOS/SMM/...) has set up | |
594 | * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM). | |
595 | * If the bus glue detected wakeup capability then it should | |
596 | * already be enabled. Either way, if wakeup should be enabled | |
597 | * but isn't, we'll enable it now. | |
1da177e4 | 598 | */ |
6a9062f3 | 599 | if ((ohci->hc_control & OHCI_CTRL_RWC) != 0 |
6fd9086a | 600 | && !device_can_wakeup(hcd->self.controller)) |
6a9062f3 | 601 | device_init_wakeup(hcd->self.controller, 1); |
1da177e4 LT |
602 | |
603 | switch (ohci->hc_control & OHCI_CTRL_HCFS) { | |
604 | case OHCI_USB_OPER: | |
605 | temp = 0; | |
606 | break; | |
607 | case OHCI_USB_SUSPEND: | |
608 | case OHCI_USB_RESUME: | |
609 | ohci->hc_control &= OHCI_CTRL_RWC; | |
610 | ohci->hc_control |= OHCI_USB_RESUME; | |
611 | temp = 10 /* msec wait */; | |
612 | break; | |
613 | // case OHCI_USB_RESET: | |
614 | default: | |
615 | ohci->hc_control &= OHCI_CTRL_RWC; | |
616 | ohci->hc_control |= OHCI_USB_RESET; | |
617 | temp = 50 /* msec wait */; | |
618 | break; | |
619 | } | |
620 | ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); | |
621 | // flush the writes | |
622 | (void) ohci_readl (ohci, &ohci->regs->control); | |
623 | msleep(temp); | |
383975d7 | 624 | |
1da177e4 LT |
625 | memset (ohci->hcca, 0, sizeof (struct ohci_hcca)); |
626 | ||
627 | /* 2msec timelimit here means no irqs/preempt */ | |
628 | spin_lock_irq (&ohci->lock); | |
629 | ||
630 | retry: | |
631 | /* HC Reset requires max 10 us delay */ | |
632 | ohci_writel (ohci, OHCI_HCR, &ohci->regs->cmdstatus); | |
633 | temp = 30; /* ... allow extra time */ | |
634 | while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) { | |
635 | if (--temp == 0) { | |
636 | spin_unlock_irq (&ohci->lock); | |
637 | ohci_err (ohci, "USB HC reset timed out!\n"); | |
638 | return -1; | |
639 | } | |
640 | udelay (1); | |
641 | } | |
642 | ||
643 | /* now we're in the SUSPEND state ... must go OPERATIONAL | |
644 | * within 2msec else HC enters RESUME | |
645 | * | |
646 | * ... but some hardware won't init fmInterval "by the book" | |
647 | * (SiS, OPTi ...), so reset again instead. SiS doesn't need | |
648 | * this if we write fmInterval after we're OPERATIONAL. | |
649 | * Unclear about ALi, ServerWorks, and others ... this could | |
650 | * easily be a longstanding bug in chip init on Linux. | |
651 | */ | |
652 | if (ohci->flags & OHCI_QUIRK_INITRESET) { | |
653 | ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); | |
654 | // flush those writes | |
655 | (void) ohci_readl (ohci, &ohci->regs->control); | |
656 | } | |
657 | ||
658 | /* Tell the controller where the control and bulk lists are | |
659 | * The lists are empty now. */ | |
660 | ohci_writel (ohci, 0, &ohci->regs->ed_controlhead); | |
661 | ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead); | |
662 | ||
663 | /* a reset clears this */ | |
664 | ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca); | |
665 | ||
666 | periodic_reinit (ohci); | |
667 | ||
668 | /* some OHCI implementations are finicky about how they init. | |
669 | * bogus values here mean not even enumeration could work. | |
670 | */ | |
671 | if ((ohci_readl (ohci, &ohci->regs->fminterval) & 0x3fff0000) == 0 | |
672 | || !ohci_readl (ohci, &ohci->regs->periodicstart)) { | |
673 | if (!(ohci->flags & OHCI_QUIRK_INITRESET)) { | |
674 | ohci->flags |= OHCI_QUIRK_INITRESET; | |
675 | ohci_dbg (ohci, "enabling initreset quirk\n"); | |
676 | goto retry; | |
677 | } | |
678 | spin_unlock_irq (&ohci->lock); | |
679 | ohci_err (ohci, "init err (%08x %04x)\n", | |
680 | ohci_readl (ohci, &ohci->regs->fminterval), | |
681 | ohci_readl (ohci, &ohci->regs->periodicstart)); | |
682 | return -EOVERFLOW; | |
683 | } | |
684 | ||
d413984a DB |
685 | /* use rhsc irqs after khubd is fully initialized */ |
686 | hcd->poll_rh = 1; | |
687 | hcd->uses_new_polling = 1; | |
688 | ||
689 | /* start controller operations */ | |
1da177e4 | 690 | ohci->hc_control &= OHCI_CTRL_RWC; |
d413984a DB |
691 | ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER; |
692 | ohci_writel (ohci, ohci->hc_control, &ohci->regs->control); | |
6a9062f3 | 693 | hcd->state = HC_STATE_RUNNING; |
1da177e4 LT |
694 | |
695 | /* wake on ConnectStatusChange, matching external hubs */ | |
696 | ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status); | |
697 | ||
698 | /* Choose the interrupts we care about now, others later on demand */ | |
699 | mask = OHCI_INTR_INIT; | |
d413984a | 700 | ohci_writel (ohci, ~0, &ohci->regs->intrstatus); |
1da177e4 LT |
701 | ohci_writel (ohci, mask, &ohci->regs->intrenable); |
702 | ||
703 | /* handle root hub init quirks ... */ | |
704 | temp = roothub_a (ohci); | |
705 | temp &= ~(RH_A_PSM | RH_A_OCPM); | |
706 | if (ohci->flags & OHCI_QUIRK_SUPERIO) { | |
707 | /* NSC 87560 and maybe others */ | |
708 | temp |= RH_A_NOCP; | |
709 | temp &= ~(RH_A_POTPGT | RH_A_NPS); | |
710 | ohci_writel (ohci, temp, &ohci->regs->roothub.a); | |
1133cd8a DB |
711 | } else if ((ohci->flags & OHCI_QUIRK_AMD756) || |
712 | (ohci->flags & OHCI_QUIRK_HUB_POWER)) { | |
1da177e4 LT |
713 | /* hub power always on; required for AMD-756 and some |
714 | * Mac platforms. ganged overcurrent reporting, if any. | |
715 | */ | |
716 | temp |= RH_A_NPS; | |
717 | ohci_writel (ohci, temp, &ohci->regs->roothub.a); | |
718 | } | |
719 | ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status); | |
720 | ohci_writel (ohci, (temp & RH_A_NPS) ? 0 : RH_B_PPCM, | |
721 | &ohci->regs->roothub.b); | |
722 | // flush those writes | |
723 | (void) ohci_readl (ohci, &ohci->regs->control); | |
724 | ||
d413984a | 725 | ohci->next_statechange = jiffies + STATECHANGE_DELAY; |
1da177e4 LT |
726 | spin_unlock_irq (&ohci->lock); |
727 | ||
728 | // POTPGT delay is bits 24-31, in 2 ms units. | |
729 | mdelay ((temp >> 23) & 0x1fe); | |
6a9062f3 | 730 | hcd->state = HC_STATE_RUNNING; |
1da177e4 | 731 | |
89a0fd18 MN |
732 | if (quirk_zfmicro(ohci)) { |
733 | /* Create timer to watch for bad queue state on ZF Micro */ | |
734 | setup_timer(&ohci->unlink_watchdog, unlink_watchdog_func, | |
735 | (unsigned long) ohci); | |
736 | ||
737 | ohci->eds_scheduled = 0; | |
738 | ohci->ed_to_check = NULL; | |
739 | } | |
740 | ||
1da177e4 LT |
741 | ohci_dump (ohci, 1); |
742 | ||
1da177e4 LT |
743 | return 0; |
744 | } | |
745 | ||
746 | /*-------------------------------------------------------------------------*/ | |
747 | ||
748 | /* an interrupt happens */ | |
749 | ||
7d12e780 | 750 | static irqreturn_t ohci_irq (struct usb_hcd *hcd) |
1da177e4 LT |
751 | { |
752 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); | |
753 | struct ohci_regs __iomem *regs = ohci->regs; | |
89a0fd18 | 754 | int ints; |
1da177e4 | 755 | |
565227c0 BH |
756 | /* Read interrupt status (and flush pending writes). We ignore the |
757 | * optimization of checking the LSB of hcca->done_head; it doesn't | |
758 | * work on all systems (edge triggering for OHCI can be a factor). | |
89a0fd18 | 759 | */ |
565227c0 | 760 | ints = ohci_readl(ohci, ®s->intrstatus); |
1da177e4 | 761 | |
565227c0 BH |
762 | /* Check for an all 1's result which is a typical consequence |
763 | * of dead, unclocked, or unplugged (CardBus...) devices | |
764 | */ | |
765 | if (ints == ~(u32)0) { | |
1da177e4 LT |
766 | disable (ohci); |
767 | ohci_dbg (ohci, "device removed!\n"); | |
768 | return IRQ_HANDLED; | |
565227c0 BH |
769 | } |
770 | ||
771 | /* We only care about interrupts that are enabled */ | |
772 | ints &= ohci_readl(ohci, ®s->intrenable); | |
1da177e4 LT |
773 | |
774 | /* interrupt for some other device? */ | |
565227c0 | 775 | if (ints == 0) |
1da177e4 | 776 | return IRQ_NOTMINE; |
d413984a | 777 | |
1da177e4 | 778 | if (ints & OHCI_INTR_UE) { |
1da177e4 | 779 | // e.g. due to PCI Master/Target Abort |
89a0fd18 | 780 | if (quirk_nec(ohci)) { |
d576bb9f MH |
781 | /* Workaround for a silicon bug in some NEC chips used |
782 | * in Apple's PowerBooks. Adapted from Darwin code. | |
783 | */ | |
784 | ohci_err (ohci, "OHCI Unrecoverable Error, scheduling NEC chip restart\n"); | |
785 | ||
786 | ohci_writel (ohci, OHCI_INTR_UE, ®s->intrdisable); | |
787 | ||
788 | schedule_work (&ohci->nec_work); | |
789 | } else { | |
790 | disable (ohci); | |
791 | ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n"); | |
792 | } | |
1da177e4 LT |
793 | |
794 | ohci_dump (ohci, 1); | |
795 | ohci_usb_reset (ohci); | |
796 | } | |
797 | ||
583ceada AS |
798 | if (ints & OHCI_INTR_RHSC) { |
799 | ohci_vdbg(ohci, "rhsc\n"); | |
800 | ohci->next_statechange = jiffies + STATECHANGE_DELAY; | |
801 | ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC, | |
802 | ®s->intrstatus); | |
052ac01a AS |
803 | |
804 | /* NOTE: Vendors didn't always make the same implementation | |
805 | * choices for RHSC. Many followed the spec; RHSC triggers | |
806 | * on an edge, like setting and maybe clearing a port status | |
807 | * change bit. With others it's level-triggered, active | |
808 | * until khubd clears all the port status change bits. We'll | |
809 | * always disable it here and rely on polling until khubd | |
810 | * re-enables it. | |
811 | */ | |
812 | ohci_writel(ohci, OHCI_INTR_RHSC, ®s->intrdisable); | |
583ceada AS |
813 | usb_hcd_poll_rh_status(hcd); |
814 | } | |
815 | ||
816 | /* For connect and disconnect events, we expect the controller | |
817 | * to turn on RHSC along with RD. But for remote wakeup events | |
818 | * this might not happen. | |
819 | */ | |
820 | else if (ints & OHCI_INTR_RD) { | |
821 | ohci_vdbg(ohci, "resume detect\n"); | |
822 | ohci_writel(ohci, OHCI_INTR_RD, ®s->intrstatus); | |
8d1a243b AS |
823 | hcd->poll_rh = 1; |
824 | if (ohci->autostop) { | |
825 | spin_lock (&ohci->lock); | |
826 | ohci_rh_resume (ohci); | |
827 | spin_unlock (&ohci->lock); | |
828 | } else | |
f197b2c5 | 829 | usb_hcd_resume_root_hub(hcd); |
1da177e4 LT |
830 | } |
831 | ||
832 | if (ints & OHCI_INTR_WDH) { | |
1da177e4 | 833 | spin_lock (&ohci->lock); |
7d12e780 | 834 | dl_done_list (ohci); |
1da177e4 | 835 | spin_unlock (&ohci->lock); |
1da177e4 | 836 | } |
dd9048af | 837 | |
89a0fd18 MN |
838 | if (quirk_zfmicro(ohci) && (ints & OHCI_INTR_SF)) { |
839 | spin_lock(&ohci->lock); | |
840 | if (ohci->ed_to_check) { | |
841 | struct ed *ed = ohci->ed_to_check; | |
842 | ||
843 | if (check_ed(ohci, ed)) { | |
844 | /* HC thinks the TD list is empty; HCD knows | |
845 | * at least one TD is outstanding | |
846 | */ | |
847 | if (--ohci->zf_delay == 0) { | |
848 | struct td *td = list_entry( | |
849 | ed->td_list.next, | |
850 | struct td, td_list); | |
851 | ohci_warn(ohci, | |
852 | "Reclaiming orphan TD %p\n", | |
853 | td); | |
854 | takeback_td(ohci, td); | |
855 | ohci->ed_to_check = NULL; | |
856 | } | |
857 | } else | |
858 | ohci->ed_to_check = NULL; | |
859 | } | |
860 | spin_unlock(&ohci->lock); | |
861 | } | |
862 | ||
1da177e4 LT |
863 | /* could track INTR_SO to reduce available PCI/... bandwidth */ |
864 | ||
865 | /* handle any pending URB/ED unlinks, leaving INTR_SF enabled | |
866 | * when there's still unlinking to be done (next frame). | |
867 | */ | |
868 | spin_lock (&ohci->lock); | |
869 | if (ohci->ed_rm_list) | |
7d12e780 | 870 | finish_unlinks (ohci, ohci_frame_no(ohci)); |
89a0fd18 MN |
871 | if ((ints & OHCI_INTR_SF) != 0 |
872 | && !ohci->ed_rm_list | |
873 | && !ohci->ed_to_check | |
1da177e4 | 874 | && HC_IS_RUNNING(hcd->state)) |
dd9048af | 875 | ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable); |
1da177e4 LT |
876 | spin_unlock (&ohci->lock); |
877 | ||
878 | if (HC_IS_RUNNING(hcd->state)) { | |
879 | ohci_writel (ohci, ints, ®s->intrstatus); | |
dd9048af | 880 | ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable); |
1da177e4 LT |
881 | // flush those writes |
882 | (void) ohci_readl (ohci, &ohci->regs->control); | |
883 | } | |
884 | ||
885 | return IRQ_HANDLED; | |
886 | } | |
887 | ||
888 | /*-------------------------------------------------------------------------*/ | |
889 | ||
890 | static void ohci_stop (struct usb_hcd *hcd) | |
dd9048af | 891 | { |
1da177e4 LT |
892 | struct ohci_hcd *ohci = hcd_to_ohci (hcd); |
893 | ||
1da177e4 LT |
894 | ohci_dump (ohci, 1); |
895 | ||
896 | flush_scheduled_work(); | |
897 | ||
898 | ohci_usb_reset (ohci); | |
899 | ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); | |
71795c1d PZ |
900 | free_irq(hcd->irq, hcd); |
901 | hcd->irq = -1; | |
902 | ||
89a0fd18 MN |
903 | if (quirk_zfmicro(ohci)) |
904 | del_timer(&ohci->unlink_watchdog); | |
ab1666c1 LY |
905 | if (quirk_amdiso(ohci)) |
906 | amd_iso_dev_put(); | |
89a0fd18 | 907 | |
1da177e4 LT |
908 | remove_debug_files (ohci); |
909 | ohci_mem_cleanup (ohci); | |
910 | if (ohci->hcca) { | |
dd9048af DB |
911 | dma_free_coherent (hcd->self.controller, |
912 | sizeof *ohci->hcca, | |
1da177e4 LT |
913 | ohci->hcca, ohci->hcca_dma); |
914 | ohci->hcca = NULL; | |
915 | ohci->hcca_dma = 0; | |
916 | } | |
917 | } | |
918 | ||
919 | /*-------------------------------------------------------------------------*/ | |
920 | ||
da6fb570 DB |
921 | #if defined(CONFIG_PM) || defined(CONFIG_PCI) |
922 | ||
1da177e4 | 923 | /* must not be called from interrupt context */ |
1da177e4 LT |
924 | static int ohci_restart (struct ohci_hcd *ohci) |
925 | { | |
926 | int temp; | |
927 | int i; | |
928 | struct urb_priv *priv; | |
1da177e4 | 929 | |
1da177e4 LT |
930 | spin_lock_irq(&ohci->lock); |
931 | disable (ohci); | |
d576bb9f MH |
932 | |
933 | /* Recycle any "live" eds/tds (and urbs). */ | |
1da177e4 LT |
934 | if (!list_empty (&ohci->pending)) |
935 | ohci_dbg(ohci, "abort schedule...\n"); | |
936 | list_for_each_entry (priv, &ohci->pending, pending) { | |
937 | struct urb *urb = priv->td[0]->urb; | |
938 | struct ed *ed = priv->ed; | |
939 | ||
940 | switch (ed->state) { | |
941 | case ED_OPER: | |
942 | ed->state = ED_UNLINK; | |
943 | ed->hwINFO |= cpu_to_hc32(ohci, ED_DEQUEUE); | |
944 | ed_deschedule (ohci, ed); | |
945 | ||
946 | ed->ed_next = ohci->ed_rm_list; | |
947 | ed->ed_prev = NULL; | |
948 | ohci->ed_rm_list = ed; | |
949 | /* FALLTHROUGH */ | |
950 | case ED_UNLINK: | |
951 | break; | |
952 | default: | |
953 | ohci_dbg(ohci, "bogus ed %p state %d\n", | |
954 | ed, ed->state); | |
955 | } | |
956 | ||
55d84968 AS |
957 | if (!urb->unlinked) |
958 | urb->unlinked = -ESHUTDOWN; | |
1da177e4 | 959 | } |
7d12e780 | 960 | finish_unlinks (ohci, 0); |
1da177e4 LT |
961 | spin_unlock_irq(&ohci->lock); |
962 | ||
963 | /* paranoia, in case that didn't work: */ | |
964 | ||
965 | /* empty the interrupt branches */ | |
966 | for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0; | |
967 | for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0; | |
dd9048af | 968 | |
1da177e4 LT |
969 | /* no EDs to remove */ |
970 | ohci->ed_rm_list = NULL; | |
971 | ||
dd9048af | 972 | /* empty control and bulk lists */ |
1da177e4 LT |
973 | ohci->ed_controltail = NULL; |
974 | ohci->ed_bulktail = NULL; | |
975 | ||
976 | if ((temp = ohci_run (ohci)) < 0) { | |
977 | ohci_err (ohci, "can't restart, %d\n", temp); | |
978 | return temp; | |
1da177e4 | 979 | } |
383975d7 | 980 | ohci_dbg(ohci, "restart complete\n"); |
1da177e4 LT |
981 | return 0; |
982 | } | |
d576bb9f | 983 | |
da6fb570 DB |
984 | #endif |
985 | ||
d576bb9f MH |
986 | /*-------------------------------------------------------------------------*/ |
987 | ||
1da177e4 | 988 | MODULE_AUTHOR (DRIVER_AUTHOR); |
2b70f073 | 989 | MODULE_DESCRIPTION(DRIVER_DESC); |
1da177e4 LT |
990 | MODULE_LICENSE ("GPL"); |
991 | ||
992 | #ifdef CONFIG_PCI | |
993 | #include "ohci-pci.c" | |
5e16fabe | 994 | #define PCI_DRIVER ohci_pci_driver |
1da177e4 LT |
995 | #endif |
996 | ||
6381fad7 | 997 | #if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111) |
1da177e4 | 998 | #include "ohci-sa1111.c" |
5e16fabe | 999 | #define SA1111_DRIVER ohci_hcd_sa1111_driver |
1da177e4 LT |
1000 | #endif |
1001 | ||
3eb0c5f4 BD |
1002 | #ifdef CONFIG_ARCH_S3C2410 |
1003 | #include "ohci-s3c2410.c" | |
5e16fabe | 1004 | #define PLATFORM_DRIVER ohci_hcd_s3c2410_driver |
3eb0c5f4 BD |
1005 | #endif |
1006 | ||
1da177e4 LT |
1007 | #ifdef CONFIG_ARCH_OMAP |
1008 | #include "ohci-omap.c" | |
5e16fabe | 1009 | #define PLATFORM_DRIVER ohci_hcd_omap_driver |
1da177e4 LT |
1010 | #endif |
1011 | ||
1012 | #ifdef CONFIG_ARCH_LH7A404 | |
1013 | #include "ohci-lh7a404.c" | |
5e16fabe | 1014 | #define PLATFORM_DRIVER ohci_hcd_lh7a404_driver |
1da177e4 LT |
1015 | #endif |
1016 | ||
e77ec189 | 1017 | #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) |
1da177e4 | 1018 | #include "ohci-pxa27x.c" |
5e16fabe | 1019 | #define PLATFORM_DRIVER ohci_hcd_pxa27x_driver |
1da177e4 LT |
1020 | #endif |
1021 | ||
a5b7474a LB |
1022 | #ifdef CONFIG_ARCH_EP93XX |
1023 | #include "ohci-ep93xx.c" | |
5e16fabe | 1024 | #define PLATFORM_DRIVER ohci_hcd_ep93xx_driver |
a5b7474a LB |
1025 | #endif |
1026 | ||
1da177e4 LT |
1027 | #ifdef CONFIG_SOC_AU1X00 |
1028 | #include "ohci-au1xxx.c" | |
5e16fabe | 1029 | #define PLATFORM_DRIVER ohci_hcd_au1xxx_driver |
1da177e4 LT |
1030 | #endif |
1031 | ||
5151d040 VW |
1032 | #ifdef CONFIG_PNX8550 |
1033 | #include "ohci-pnx8550.c" | |
5e16fabe | 1034 | #define PLATFORM_DRIVER ohci_hcd_pnx8550_driver |
5151d040 VW |
1035 | #endif |
1036 | ||
1da177e4 LT |
1037 | #ifdef CONFIG_USB_OHCI_HCD_PPC_SOC |
1038 | #include "ohci-ppc-soc.c" | |
5e16fabe | 1039 | #define PLATFORM_DRIVER ohci_hcd_ppc_soc_driver |
1da177e4 LT |
1040 | #endif |
1041 | ||
58a0cd78 | 1042 | #ifdef CONFIG_ARCH_AT91 |
39a269c0 | 1043 | #include "ohci-at91.c" |
5e16fabe | 1044 | #define PLATFORM_DRIVER ohci_hcd_at91_driver |
39a269c0 AV |
1045 | #endif |
1046 | ||
60bbfc84 VW |
1047 | #ifdef CONFIG_ARCH_PNX4008 |
1048 | #include "ohci-pnx4008.c" | |
5e16fabe | 1049 | #define PLATFORM_DRIVER usb_hcd_pnx4008_driver |
60bbfc84 VW |
1050 | #endif |
1051 | ||
828d55c5 YS |
1052 | #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ |
1053 | defined(CONFIG_CPU_SUBTYPE_SH7721) || \ | |
1054 | defined(CONFIG_CPU_SUBTYPE_SH7763) | |
1055 | #include "ohci-sh.c" | |
1056 | #define PLATFORM_DRIVER ohci_hcd_sh_driver | |
1057 | #endif | |
1058 | ||
5e16fabe | 1059 | |
495a678f SM |
1060 | #ifdef CONFIG_USB_OHCI_HCD_PPC_OF |
1061 | #include "ohci-ppc-of.c" | |
1062 | #define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver | |
1063 | #endif | |
1064 | ||
6a6c957e GL |
1065 | #ifdef CONFIG_PPC_PS3 |
1066 | #include "ohci-ps3.c" | |
7a4eb7fd | 1067 | #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver |
6a6c957e GL |
1068 | #endif |
1069 | ||
c604e851 MB |
1070 | #ifdef CONFIG_USB_OHCI_HCD_SSB |
1071 | #include "ohci-ssb.c" | |
1072 | #define SSB_OHCI_DRIVER ssb_ohci_driver | |
1073 | #endif | |
1074 | ||
f54aab6e MD |
1075 | #ifdef CONFIG_MFD_SM501 |
1076 | #include "ohci-sm501.c" | |
3ee38d8b | 1077 | #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver |
f54aab6e MD |
1078 | #endif |
1079 | ||
78c73414 DB |
1080 | #ifdef CONFIG_MFD_TC6393XB |
1081 | #include "ohci-tmio.c" | |
1082 | #define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver | |
1083 | #endif | |
1084 | ||
5e16fabe SM |
1085 | #if !defined(PCI_DRIVER) && \ |
1086 | !defined(PLATFORM_DRIVER) && \ | |
495a678f | 1087 | !defined(OF_PLATFORM_DRIVER) && \ |
6a6c957e | 1088 | !defined(SA1111_DRIVER) && \ |
c604e851 | 1089 | !defined(PS3_SYSTEM_BUS_DRIVER) && \ |
3ee38d8b | 1090 | !defined(SM501_OHCI_DRIVER) && \ |
78c73414 | 1091 | !defined(TMIO_OHCI_DRIVER) && \ |
c604e851 | 1092 | !defined(SSB_OHCI_DRIVER) |
1da177e4 LT |
1093 | #error "missing bus glue for ohci-hcd" |
1094 | #endif | |
5e16fabe SM |
1095 | |
1096 | static int __init ohci_hcd_mod_init(void) | |
1097 | { | |
1098 | int retval = 0; | |
5e16fabe SM |
1099 | |
1100 | if (usb_disabled()) | |
1101 | return -ENODEV; | |
1102 | ||
2b70f073 | 1103 | printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name); |
5e16fabe SM |
1104 | pr_debug ("%s: block sizes: ed %Zd td %Zd\n", hcd_name, |
1105 | sizeof (struct ed), sizeof (struct td)); | |
9beeee65 | 1106 | set_bit(USB_OHCI_LOADED, &usb_hcds_loaded); |
5e16fabe | 1107 | |
684c19e0 TJ |
1108 | #ifdef DEBUG |
1109 | ohci_debug_root = debugfs_create_dir("ohci", NULL); | |
1110 | if (!ohci_debug_root) { | |
1111 | retval = -ENOENT; | |
1112 | goto error_debug; | |
1113 | } | |
1114 | #endif | |
1115 | ||
6a6c957e | 1116 | #ifdef PS3_SYSTEM_BUS_DRIVER |
7a4eb7fd GL |
1117 | retval = ps3_ohci_driver_register(&PS3_SYSTEM_BUS_DRIVER); |
1118 | if (retval < 0) | |
1119 | goto error_ps3; | |
6a6c957e GL |
1120 | #endif |
1121 | ||
5e16fabe SM |
1122 | #ifdef PLATFORM_DRIVER |
1123 | retval = platform_driver_register(&PLATFORM_DRIVER); | |
1124 | if (retval < 0) | |
de44743b | 1125 | goto error_platform; |
5e16fabe SM |
1126 | #endif |
1127 | ||
495a678f SM |
1128 | #ifdef OF_PLATFORM_DRIVER |
1129 | retval = of_register_platform_driver(&OF_PLATFORM_DRIVER); | |
1130 | if (retval < 0) | |
de44743b | 1131 | goto error_of_platform; |
495a678f SM |
1132 | #endif |
1133 | ||
5e16fabe SM |
1134 | #ifdef SA1111_DRIVER |
1135 | retval = sa1111_driver_register(&SA1111_DRIVER); | |
1136 | if (retval < 0) | |
de44743b | 1137 | goto error_sa1111; |
5e16fabe SM |
1138 | #endif |
1139 | ||
1140 | #ifdef PCI_DRIVER | |
1141 | retval = pci_register_driver(&PCI_DRIVER); | |
1142 | if (retval < 0) | |
de44743b | 1143 | goto error_pci; |
5e16fabe SM |
1144 | #endif |
1145 | ||
c604e851 MB |
1146 | #ifdef SSB_OHCI_DRIVER |
1147 | retval = ssb_driver_register(&SSB_OHCI_DRIVER); | |
1148 | if (retval) | |
1149 | goto error_ssb; | |
1150 | #endif | |
1151 | ||
3ee38d8b BD |
1152 | #ifdef SM501_OHCI_DRIVER |
1153 | retval = platform_driver_register(&SM501_OHCI_DRIVER); | |
1154 | if (retval < 0) | |
1155 | goto error_sm501; | |
1156 | #endif | |
1157 | ||
78c73414 DB |
1158 | #ifdef TMIO_OHCI_DRIVER |
1159 | retval = platform_driver_register(&TMIO_OHCI_DRIVER); | |
1160 | if (retval < 0) | |
1161 | goto error_tmio; | |
1162 | #endif | |
1163 | ||
5e16fabe SM |
1164 | return retval; |
1165 | ||
1166 | /* Error path */ | |
78c73414 DB |
1167 | #ifdef TMIO_OHCI_DRIVER |
1168 | platform_driver_unregister(&TMIO_OHCI_DRIVER); | |
1169 | error_tmio: | |
1170 | #endif | |
3ee38d8b | 1171 | #ifdef SM501_OHCI_DRIVER |
78c73414 | 1172 | platform_driver_unregister(&SM501_OHCI_DRIVER); |
3ee38d8b BD |
1173 | error_sm501: |
1174 | #endif | |
c604e851 | 1175 | #ifdef SSB_OHCI_DRIVER |
78c73414 | 1176 | ssb_driver_unregister(&SSB_OHCI_DRIVER); |
c604e851 MB |
1177 | error_ssb: |
1178 | #endif | |
de44743b | 1179 | #ifdef PCI_DRIVER |
c604e851 | 1180 | pci_unregister_driver(&PCI_DRIVER); |
de44743b BH |
1181 | error_pci: |
1182 | #endif | |
1183 | #ifdef SA1111_DRIVER | |
1184 | sa1111_driver_unregister(&SA1111_DRIVER); | |
1185 | error_sa1111: | |
5e16fabe | 1186 | #endif |
495a678f | 1187 | #ifdef OF_PLATFORM_DRIVER |
de44743b BH |
1188 | of_unregister_platform_driver(&OF_PLATFORM_DRIVER); |
1189 | error_of_platform: | |
495a678f | 1190 | #endif |
de44743b BH |
1191 | #ifdef PLATFORM_DRIVER |
1192 | platform_driver_unregister(&PLATFORM_DRIVER); | |
1193 | error_platform: | |
6a6c957e GL |
1194 | #endif |
1195 | #ifdef PS3_SYSTEM_BUS_DRIVER | |
7a4eb7fd | 1196 | ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); |
6a6c957e | 1197 | error_ps3: |
5e16fabe | 1198 | #endif |
684c19e0 TJ |
1199 | #ifdef DEBUG |
1200 | debugfs_remove(ohci_debug_root); | |
1201 | ohci_debug_root = NULL; | |
1202 | error_debug: | |
1203 | #endif | |
1204 | ||
9beeee65 | 1205 | clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); |
5e16fabe SM |
1206 | return retval; |
1207 | } | |
1208 | module_init(ohci_hcd_mod_init); | |
1209 | ||
1210 | static void __exit ohci_hcd_mod_exit(void) | |
1211 | { | |
78c73414 DB |
1212 | #ifdef TMIO_OHCI_DRIVER |
1213 | platform_driver_unregister(&TMIO_OHCI_DRIVER); | |
1214 | #endif | |
3ee38d8b BD |
1215 | #ifdef SM501_OHCI_DRIVER |
1216 | platform_driver_unregister(&SM501_OHCI_DRIVER); | |
1217 | #endif | |
c604e851 MB |
1218 | #ifdef SSB_OHCI_DRIVER |
1219 | ssb_driver_unregister(&SSB_OHCI_DRIVER); | |
1220 | #endif | |
5e16fabe SM |
1221 | #ifdef PCI_DRIVER |
1222 | pci_unregister_driver(&PCI_DRIVER); | |
1223 | #endif | |
1224 | #ifdef SA1111_DRIVER | |
1225 | sa1111_driver_unregister(&SA1111_DRIVER); | |
1226 | #endif | |
495a678f SM |
1227 | #ifdef OF_PLATFORM_DRIVER |
1228 | of_unregister_platform_driver(&OF_PLATFORM_DRIVER); | |
1229 | #endif | |
5e16fabe SM |
1230 | #ifdef PLATFORM_DRIVER |
1231 | platform_driver_unregister(&PLATFORM_DRIVER); | |
1232 | #endif | |
6a6c957e | 1233 | #ifdef PS3_SYSTEM_BUS_DRIVER |
7a4eb7fd | 1234 | ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); |
6a6c957e | 1235 | #endif |
684c19e0 TJ |
1236 | #ifdef DEBUG |
1237 | debugfs_remove(ohci_debug_root); | |
1238 | #endif | |
9beeee65 | 1239 | clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); |
5e16fabe SM |
1240 | } |
1241 | module_exit(ohci_hcd_mod_exit); | |
1242 |