USB: serial: ch341: New VID/PID for CH341 USB-serial
[linux-2.6-block.git] / drivers / usb / host / ehci-orion.c
CommitLineData
e96ffe2f
TP
1/*
2 * drivers/usb/host/ehci-orion.c
3 *
4 * Tzachi Perelstein <tzachi@marvell.com>
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11#include <linux/kernel.h>
12#include <linux/module.h>
13#include <linux/platform_device.h>
92aecfa9 14#include <linux/mbus.h>
705a7521 15#include <asm/plat-orion/ehci-orion.h>
e96ffe2f
TP
16
17#define rdl(off) __raw_readl(hcd->regs + (off))
18#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
19
e96ffe2f
TP
20#define USB_CMD 0x140
21#define USB_MODE 0x1a8
92aecfa9
LB
22#define USB_CAUSE 0x310
23#define USB_MASK 0x314
24#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
25#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
e96ffe2f
TP
26#define USB_IPG 0x360
27#define USB_PHY_PWR_CTRL 0x400
28#define USB_PHY_TX_CTRL 0x420
29#define USB_PHY_RX_CTRL 0x430
30#define USB_PHY_IVREF_CTRL 0x440
31#define USB_PHY_TST_GRP_CTRL 0x450
32
33/*
34 * Implement Orion USB controller specification guidelines
35 */
36static void orion_usb_setup(struct usb_hcd *hcd)
37{
38 /*
39 * Clear interrupt cause and mask
40 */
41 wrl(USB_CAUSE, 0);
42 wrl(USB_MASK, 0);
43
44 /*
45 * Reset controller
46 */
47 wrl(USB_CMD, rdl(USB_CMD) | 0x2);
48 while (rdl(USB_CMD) & 0x2);
49
50 /*
51 * GL# USB-10: Set IPG for non start of frame packets
52 * Bits[14:8]=0xc
53 */
54 wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
55
56 /*
57 * GL# USB-9: USB 2.0 Power Control
58 * BG_VSEL[7:6]=0x1
59 */
60 wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
61
62 /*
63 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
64 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
65 */
66 wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
67
68 /*
69 * GL# USB-3 GL# USB-9: USB PHY Rx Control
70 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
71 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
72 */
73 wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
74
75 /*
76 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
77 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
78 */
79 wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
80
81 /*
82 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
83 * REG_FIFO_SQ_RST[15]=0
84 */
85 wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
86
87 /*
88 * Stop and reset controller
89 */
90 wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
91 wrl(USB_CMD, rdl(USB_CMD) | 0x2);
92 while (rdl(USB_CMD) & 0x2);
93
94 /*
95 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
96 * TBD: This need to be done after each reset!
97 * GL# USB-4 Setup USB Host mode
98 */
99 wrl(USB_MODE, 0x13);
100}
101
102static int ehci_orion_setup(struct usb_hcd *hcd)
103{
104 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
105 int retval;
106
107 retval = ehci_halt(ehci);
108 if (retval)
109 return retval;
110
111 /*
112 * data structure init
113 */
114 retval = ehci_init(hcd);
115 if (retval)
116 return retval;
117
118 ehci_reset(ehci);
119 ehci_port_power(ehci, 0);
120
121 return retval;
122}
123
124static const struct hc_driver ehci_orion_hc_driver = {
125 .description = hcd_name,
126 .product_desc = "Marvell Orion EHCI",
127 .hcd_priv_size = sizeof(struct ehci_hcd),
128
129 /*
130 * generic hardware linkage
131 */
132 .irq = ehci_irq,
133 .flags = HCD_MEMORY | HCD_USB2,
134
135 /*
136 * basic lifecycle operations
137 */
138 .reset = ehci_orion_setup,
139 .start = ehci_run,
140#ifdef CONFIG_PM
141 .suspend = ehci_bus_suspend,
142 .resume = ehci_bus_resume,
143#endif
144 .stop = ehci_stop,
145 .shutdown = ehci_shutdown,
146
147 /*
148 * managing i/o requests and associated device resources
149 */
150 .urb_enqueue = ehci_urb_enqueue,
151 .urb_dequeue = ehci_urb_dequeue,
152 .endpoint_disable = ehci_endpoint_disable,
153
154 /*
155 * scheduling support
156 */
157 .get_frame_number = ehci_get_frame,
158
159 /*
160 * root hub support
161 */
162 .hub_status_data = ehci_hub_status_data,
163 .hub_control = ehci_hub_control,
164 .bus_suspend = ehci_bus_suspend,
165 .bus_resume = ehci_bus_resume,
166};
167
92aecfa9
LB
168static void __init
169ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
170 struct mbus_dram_target_info *dram)
171{
172 int i;
173
174 for (i = 0; i < 4; i++) {
175 wrl(USB_WINDOW_CTRL(i), 0);
176 wrl(USB_WINDOW_BASE(i), 0);
177 }
178
179 for (i = 0; i < dram->num_cs; i++) {
180 struct mbus_dram_window *cs = dram->cs + i;
181
182 wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
183 (cs->mbus_attr << 8) |
184 (dram->mbus_dram_target_id << 4) | 1);
185 wrl(USB_WINDOW_BASE(i), cs->base);
186 }
187}
188
e96ffe2f
TP
189static int __init ehci_orion_drv_probe(struct platform_device *pdev)
190{
92aecfa9 191 struct orion_ehci_data *pd = pdev->dev.platform_data;
e96ffe2f
TP
192 struct resource *res;
193 struct usb_hcd *hcd;
194 struct ehci_hcd *ehci;
195 void __iomem *regs;
196 int irq, err;
197
198 if (usb_disabled())
199 return -ENODEV;
200
201 pr_debug("Initializing Orion-SoC USB Host Controller\n");
202
203 irq = platform_get_irq(pdev, 0);
204 if (irq <= 0) {
205 dev_err(&pdev->dev,
206 "Found HC with no IRQ. Check %s setup!\n",
207 pdev->dev.bus_id);
208 err = -ENODEV;
209 goto err1;
210 }
211
212 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
213 if (!res) {
214 dev_err(&pdev->dev,
215 "Found HC with no register addr. Check %s setup!\n",
216 pdev->dev.bus_id);
217 err = -ENODEV;
218 goto err1;
219 }
220
221 if (!request_mem_region(res->start, res->end - res->start + 1,
222 ehci_orion_hc_driver.description)) {
223 dev_dbg(&pdev->dev, "controller already in use\n");
224 err = -EBUSY;
225 goto err1;
226 }
227
228 regs = ioremap(res->start, res->end - res->start + 1);
229 if (regs == NULL) {
230 dev_dbg(&pdev->dev, "error mapping memory\n");
231 err = -EFAULT;
232 goto err2;
233 }
234
235 hcd = usb_create_hcd(&ehci_orion_hc_driver,
236 &pdev->dev, pdev->dev.bus_id);
237 if (!hcd) {
238 err = -ENOMEM;
239 goto err3;
240 }
241
242 hcd->rsrc_start = res->start;
243 hcd->rsrc_len = res->end - res->start + 1;
244 hcd->regs = regs;
245
246 ehci = hcd_to_ehci(hcd);
247 ehci->caps = hcd->regs + 0x100;
248 ehci->regs = hcd->regs + 0x100 +
249 HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
250 ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
251 ehci->is_tdi_rh_tt = 1;
252 ehci->sbrn = 0x20;
253
92aecfa9
LB
254 /*
255 * (Re-)program MBUS remapping windows if we are asked to.
256 */
257 if (pd != NULL && pd->dram != NULL)
258 ehci_orion_conf_mbus_windows(hcd, pd->dram);
259
e96ffe2f
TP
260 /*
261 * setup Orion USB controller
262 */
263 orion_usb_setup(hcd);
264
265 err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
266 if (err)
267 goto err4;
268
269 return 0;
270
271err4:
272 usb_put_hcd(hcd);
273err3:
274 iounmap(regs);
275err2:
276 release_mem_region(res->start, res->end - res->start + 1);
277err1:
278 dev_err(&pdev->dev, "init %s fail, %d\n",
279 pdev->dev.bus_id, err);
280
281 return err;
282}
283
284static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
285{
286 struct usb_hcd *hcd = platform_get_drvdata(pdev);
287
288 usb_remove_hcd(hcd);
289 iounmap(hcd->regs);
290 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
291 usb_put_hcd(hcd);
292
293 return 0;
294}
295
296MODULE_ALIAS("platform:orion-ehci");
297
298static struct platform_driver ehci_orion_driver = {
299 .probe = ehci_orion_drv_probe,
300 .remove = __exit_p(ehci_orion_drv_remove),
301 .shutdown = usb_hcd_platform_shutdown,
302 .driver.name = "orion-ehci",
303};