[linux-2.6-block.git] / drivers / usb / host / ehci-orion.c

/*
 * drivers/usb/host/ehci-orion.c
 *
 * Tzachi Perelstein <tzachi@marvell.com>
 *
 * This file is licensed under  the terms of the GNU General Public
 * License version 2. This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mbus.h>
#include <plat/ehci-orion.h>

#define rdl(off)	__raw_readl(hcd->regs + (off))
#define wrl(off, val)	__raw_writel((val), hcd->regs + (off))

#define USB_CMD			0x140
#define USB_MODE		0x1a8
#define USB_CAUSE		0x310
#define USB_MASK		0x314
#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
#define USB_IPG			0x360
#define USB_PHY_PWR_CTRL	0x400
#define USB_PHY_TX_CTRL		0x420
#define USB_PHY_RX_CTRL		0x430
#define USB_PHY_IVREF_CTRL	0x440
#define USB_PHY_TST_GRP_CTRL	0x450

/*
 * Implement Orion USB controller specification guidelines
 */
static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
{
	/* The below GLs are according to the Orion Errata document */
	/*
	 * Clear interrupt cause and mask
	 */
	wrl(USB_CAUSE, 0);
	wrl(USB_MASK, 0);

	/*
	 * Reset controller
	 */
	wrl(USB_CMD, rdl(USB_CMD) | 0x2);
	while (rdl(USB_CMD) & 0x2);

	/*
	 * GL# USB-10: Set IPG for non start of frame packets
	 * Bits[14:8]=0xc
	 */
	wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);

	/*
	 * GL# USB-9: USB 2.0 Power Control
	 * BG_VSEL[7:6]=0x1
	 */
	wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);

	/*
	 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
	 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
	 */
	wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);

	/*
	 * GL# USB-3 GL# USB-9: USB PHY Rx Control
	 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
	 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
	 */
	wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);

	/*
	 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
	 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
	 */
	wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);

	/*
	 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
	 * REG_FIFO_SQ_RST[15]=0
	 */
	wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);

	/*
	 * Stop and reset controller
	 */
	wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
	wrl(USB_CMD, rdl(USB_CMD) | 0x2);
	while (rdl(USB_CMD) & 0x2);

	/*
	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
	 * TBD: This need to be done after each reset!
	 * GL# USB-4 Setup USB Host mode
	 */
	wrl(USB_MODE, 0x13);
}

static int ehci_orion_setup(struct usb_hcd *hcd)
{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	int retval;

	ehci_reset(ehci);
	retval = ehci_halt(ehci);
	if (retval)
		return retval;

	/*
	 * data structure init
	 */
	retval = ehci_init(hcd);
	if (retval)
		return retval;

	hcd->has_tt = 1;

	ehci_port_power(ehci, 0);

	return retval;
}

static const struct hc_driver ehci_orion_hc_driver = {
	.description = hcd_name,
	.product_desc = "Marvell Orion EHCI",
	.hcd_priv_size = sizeof(struct ehci_hcd),

	/*
	 * generic hardware linkage
	 */
	.irq = ehci_irq,
	.flags = HCD_MEMORY | HCD_USB2,

	/*
	 * basic lifecycle operations
	 */
	.reset = ehci_orion_setup,
	.start = ehci_run,
	.stop = ehci_stop,
	.shutdown = ehci_shutdown,

	/*
	 * managing i/o requests and associated device resources
	 */
	.urb_enqueue = ehci_urb_enqueue,
	.urb_dequeue = ehci_urb_dequeue,
	.endpoint_disable = ehci_endpoint_disable,
	.endpoint_reset = ehci_endpoint_reset,

	/*
	 * scheduling support
	 */
	.get_frame_number = ehci_get_frame,

	/*
	 * root hub support
	 */
	.hub_status_data = ehci_hub_status_data,
	.hub_control = ehci_hub_control,
	.bus_suspend = ehci_bus_suspend,
	.bus_resume = ehci_bus_resume,
	.relinquish_port = ehci_relinquish_port,
	.port_handed_over = ehci_port_handed_over,

	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};

static void __init
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
				struct mbus_dram_target_info *dram)
{
	int i;

	for (i = 0; i < 4; i++) {
		wrl(USB_WINDOW_CTRL(i), 0);
		wrl(USB_WINDOW_BASE(i), 0);
	}

	for (i = 0; i < dram->num_cs; i++) {
		struct mbus_dram_window *cs = dram->cs + i;

		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
					(cs->mbus_attr << 8) |
					(dram->mbus_dram_target_id << 4) | 1);
		wrl(USB_WINDOW_BASE(i), cs->base);
	}
}

static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
{
	struct orion_ehci_data *pd = pdev->dev.platform_data;
	struct resource *res;
	struct usb_hcd *hcd;
	struct ehci_hcd *ehci;
	void __iomem *regs;
	int irq, err;

	if (usb_disabled())
		return -ENODEV;

	pr_debug("Initializing Orion-SoC USB Host Controller\n");

	irq = platform_get_irq(pdev, 0);
	if (irq <= 0) {
		dev_err(&pdev->dev,
			"Found HC with no IRQ. Check %s setup!\n",
			dev_name(&pdev->dev));
		err = -ENODEV;
		goto err1;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		dev_err(&pdev->dev,
			"Found HC with no register addr. Check %s setup!\n",
			dev_name(&pdev->dev));
		err = -ENODEV;
		goto err1;
	}

	if (!request_mem_region(res->start, res->end - res->start + 1,
				ehci_orion_hc_driver.description)) {
		dev_dbg(&pdev->dev, "controller already in use\n");
		err = -EBUSY;
		goto err1;
	}

	regs = ioremap(res->start, res->end - res->start + 1);
	if (regs == NULL) {
		dev_dbg(&pdev->dev, "error mapping memory\n");
		err = -EFAULT;
		goto err2;
	}

	hcd = usb_create_hcd(&ehci_orion_hc_driver,
			&pdev->dev, dev_name(&pdev->dev));
	if (!hcd) {
		err = -ENOMEM;
		goto err3;
	}

	hcd->rsrc_start = res->start;
	hcd->rsrc_len = res->end - res->start + 1;
	hcd->regs = regs;

	ehci = hcd_to_ehci(hcd);
	ehci->caps = hcd->regs + 0x100;
	ehci->regs = hcd->regs + 0x100 +
		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
	hcd->has_tt = 1;
	ehci->sbrn = 0x20;

	/*
	 * (Re-)program MBUS remapping windows if we are asked to.
	 */
	if (pd != NULL && pd->dram != NULL)
		ehci_orion_conf_mbus_windows(hcd, pd->dram);

	/*
	 * setup Orion USB controller.
	 */
	switch (pd->phy_version) {
	case EHCI_PHY_NA:	/* dont change USB phy settings */
		break;
	case EHCI_PHY_ORION:
		orion_usb_phy_v1_setup(hcd);
		break;
	case EHCI_PHY_DD:
	case EHCI_PHY_KW:
	default:
		printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n");
	}

	err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
	if (err)
		goto err4;

	return 0;

err4:
	usb_put_hcd(hcd);
err3:
	iounmap(regs);
err2:
	release_mem_region(res->start, res->end - res->start + 1);
err1:
	dev_err(&pdev->dev, "init %s fail, %d\n",
		dev_name(&pdev->dev), err);

	return err;
}

static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
{
	struct usb_hcd *hcd = platform_get_drvdata(pdev);

	usb_remove_hcd(hcd);
	iounmap(hcd->regs);
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
	usb_put_hcd(hcd);

	return 0;
}

MODULE_ALIAS("platform:orion-ehci");

static struct platform_driver ehci_orion_driver = {
	.probe		= ehci_orion_drv_probe,
	.remove		= __exit_p(ehci_orion_drv_remove),
	.shutdown	= usb_hcd_platform_shutdown,
	.driver.name	= "orion-ehci",
};
Commit	Line	Data
e96ffe2f TP	1	/*
	2	* drivers/usb/host/ehci-orion.c
	3	*
	4	* Tzachi Perelstein <tzachi@marvell.com>
	5	*
	6	* This file is licensed under the terms of the GNU General Public
	7	* License version 2. This program is licensed "as is" without any
	8	* warranty of any kind, whether express or implied.
	9	*/
	10
	11	#include <linux/kernel.h>
	12	#include <linux/module.h>
	13	#include <linux/platform_device.h>
92aecfa9	14	#include <linux/mbus.h>
6f088f1d	15	#include <plat/ehci-orion.h>
e96ffe2f TP	16
	17	#define rdl(off) __raw_readl(hcd->regs + (off))
	18	#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
	19
e96ffe2f TP	20	#define USB_CMD 0x140
e96ffe2f TP	21	#define USB_MODE 0x1a8
92aecfa9 LB	22	#define USB_CAUSE 0x310
	23	#define USB_MASK 0x314
	24	#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
	25	#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
e96ffe2f TP	26	#define USB_IPG 0x360
	27	#define USB_PHY_PWR_CTRL 0x400
	28	#define USB_PHY_TX_CTRL 0x420
	29	#define USB_PHY_RX_CTRL 0x430
	30	#define USB_PHY_IVREF_CTRL 0x440
	31	#define USB_PHY_TST_GRP_CTRL 0x450
	32
	33	/*
	34	* Implement Orion USB controller specification guidelines
	35	*/
fb6f5529	36	static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
e96ffe2f	37	{
fb6f5529	38	/* The below GLs are according to the Orion Errata document */
e96ffe2f TP	39	/*
	40	* Clear interrupt cause and mask
	41	*/
	42	wrl(USB_CAUSE, 0);
	43	wrl(USB_MASK, 0);
	44
	45	/*
	46	* Reset controller
	47	*/
	48	wrl(USB_CMD, rdl(USB_CMD) \| 0x2);
	49	while (rdl(USB_CMD) & 0x2);
	50
	51	/*
	52	* GL# USB-10: Set IPG for non start of frame packets
	53	* Bits[14:8]=0xc
	54	*/
	55	wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) \| 0xc00);
	56
	57	/*
	58	* GL# USB-9: USB 2.0 Power Control
	59	* BG_VSEL[7:6]=0x1
	60	*/
	61	wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)\| 0x40);
	62
	63	/*
	64	* GL# USB-1: USB PHY Tx Control - force calibration to '8'
	65	* TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
	66	*/
	67	wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) \| 0x202040);
	68
	69	/*
	70	* GL# USB-3 GL# USB-9: USB PHY Rx Control
	71	* RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
	72	* CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
	73	*/
	74	wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) \| 0xc0000010);
	75
	76	/*
	77	* GL# USB-3 GL# USB-9: USB PHY IVREF Control
	78	* PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
	79	*/
	80	wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) \| 0x32);
	81
	82	/*
	83	* GL# USB-3 GL# USB-9: USB PHY Test Group Control
	84	* REG_FIFO_SQ_RST[15]=0
	85	*/
	86	wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
	87
	88	/*
	89	* Stop and reset controller
	90	*/
	91	wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
	92	wrl(USB_CMD, rdl(USB_CMD) \| 0x2);
	93	while (rdl(USB_CMD) & 0x2);
	94
	95	/*
	96	* GL# USB-5 Streaming disable REG_USB_MODE[4]=1
	97	* TBD: This need to be done after each reset!
	98	* GL# USB-4 Setup USB Host mode
	99	*/
	100	wrl(USB_MODE, 0x13);
	101	}
	102
103	static int ehci_orion_setup(struct usb_hcd *hcd)
104	{
105	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
106	int retval;
107
bcfa4e68	108	ehci_reset(ehci);
e96ffe2f TP	109	retval = ehci_halt(ehci);
	110	if (retval)
	111	return retval;
	112
	113	/*
	114	* data structure init
	115	*/
	116	retval = ehci_init(hcd);
	117	if (retval)
	118	return retval;
	119
129bd474 LB	120	hcd->has_tt = 1;
129bd474 LB	121
e96ffe2f TP	122	ehci_port_power(ehci, 0);
	123
	124	return retval;
	125	}
	126
	127	static const struct hc_driver ehci_orion_hc_driver = {
	128	.description = hcd_name,
	129	.product_desc = "Marvell Orion EHCI",
	130	.hcd_priv_size = sizeof(struct ehci_hcd),
	131
	132	/*
	133	* generic hardware linkage
	134	*/
	135	.irq = ehci_irq,
	136	.flags = HCD_MEMORY \| HCD_USB2,
	137
	138	/*
	139	* basic lifecycle operations
	140	*/
	141	.reset = ehci_orion_setup,
	142	.start = ehci_run,
e96ffe2f TP	143	.stop = ehci_stop,
	144	.shutdown = ehci_shutdown,
	145
	146	/*
	147	* managing i/o requests and associated device resources
	148	*/
	149	.urb_enqueue = ehci_urb_enqueue,
	150	.urb_dequeue = ehci_urb_dequeue,
	151	.endpoint_disable = ehci_endpoint_disable,
b18ffd49	152	.endpoint_reset = ehci_endpoint_reset,
e96ffe2f TP	153
	154	/*
	155	* scheduling support
	156	*/
	157	.get_frame_number = ehci_get_frame,
	158
	159	/*
	160	* root hub support
	161	*/
	162	.hub_status_data = ehci_hub_status_data,
	163	.hub_control = ehci_hub_control,
	164	.bus_suspend = ehci_bus_suspend,
	165	.bus_resume = ehci_bus_resume,
a8e51775	166	.relinquish_port = ehci_relinquish_port,
3a31155c	167	.port_handed_over = ehci_port_handed_over,
914b7012 AS	168
914b7012 AS	169	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
e96ffe2f TP	170	};
e96ffe2f TP	171
92aecfa9 LB	172	static void __init
	173	ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
	174	struct mbus_dram_target_info *dram)
	175	{
	176	int i;
	177
	178	for (i = 0; i < 4; i++) {
	179	wrl(USB_WINDOW_CTRL(i), 0);
	180	wrl(USB_WINDOW_BASE(i), 0);
	181	}
	182
	183	for (i = 0; i < dram->num_cs; i++) {
	184	struct mbus_dram_window *cs = dram->cs + i;
	185
	186	wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) \|
	187	(cs->mbus_attr << 8) \|
	188	(dram->mbus_dram_target_id << 4) \| 1);
	189	wrl(USB_WINDOW_BASE(i), cs->base);
	190	}
	191	}
	192
dc2f2b75	193	static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
e96ffe2f	194	{
92aecfa9	195	struct orion_ehci_data *pd = pdev->dev.platform_data;
e96ffe2f TP	196	struct resource *res;
	197	struct usb_hcd *hcd;
	198	struct ehci_hcd *ehci;
	199	void __iomem *regs;
	200	int irq, err;
	201
	202	if (usb_disabled())
	203	return -ENODEV;
	204
	205	pr_debug("Initializing Orion-SoC USB Host Controller\n");
	206
	207	irq = platform_get_irq(pdev, 0);
	208	if (irq <= 0) {
	209	dev_err(&pdev->dev,
	210	"Found HC with no IRQ. Check %s setup!\n",
7071a3ce	211	dev_name(&pdev->dev));
e96ffe2f TP	212	err = -ENODEV;
	213	goto err1;
	214	}
	215
	216	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	217	if (!res) {
	218	dev_err(&pdev->dev,
	219	"Found HC with no register addr. Check %s setup!\n",
7071a3ce	220	dev_name(&pdev->dev));
e96ffe2f TP	221	err = -ENODEV;
	222	goto err1;
	223	}
	224
	225	if (!request_mem_region(res->start, res->end - res->start + 1,
	226	ehci_orion_hc_driver.description)) {
	227	dev_dbg(&pdev->dev, "controller already in use\n");
	228	err = -EBUSY;
	229	goto err1;
	230	}
	231
	232	regs = ioremap(res->start, res->end - res->start + 1);
	233	if (regs == NULL) {
	234	dev_dbg(&pdev->dev, "error mapping memory\n");
	235	err = -EFAULT;
	236	goto err2;
	237	}
	238
	239	hcd = usb_create_hcd(&ehci_orion_hc_driver,
7071a3ce	240	&pdev->dev, dev_name(&pdev->dev));
e96ffe2f TP	241	if (!hcd) {
	242	err = -ENOMEM;
	243	goto err3;
	244	}
	245
	246	hcd->rsrc_start = res->start;
	247	hcd->rsrc_len = res->end - res->start + 1;
	248	hcd->regs = regs;
	249
	250	ehci = hcd_to_ehci(hcd);
	251	ehci->caps = hcd->regs + 0x100;
	252	ehci->regs = hcd->regs + 0x100 +
	253	HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
	254	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
a8e51775	255	hcd->has_tt = 1;
e96ffe2f TP	256	ehci->sbrn = 0x20;
e96ffe2f TP	257
92aecfa9 LB	258	/*
	259	* (Re-)program MBUS remapping windows if we are asked to.
	260	*/
	261	if (pd != NULL && pd->dram != NULL)
	262	ehci_orion_conf_mbus_windows(hcd, pd->dram);
	263
e96ffe2f	264	/*
fb6f5529	265	* setup Orion USB controller.
e96ffe2f	266	*/
fb6f5529 RS	267	switch (pd->phy_version) {
	268	case EHCI_PHY_NA: /* dont change USB phy settings */
	269	break;
	270	case EHCI_PHY_ORION:
	271	orion_usb_phy_v1_setup(hcd);
	272	break;
	273	case EHCI_PHY_DD:
	274	case EHCI_PHY_KW:
	275	default:
	276	printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n");
	277	}
e96ffe2f TP	278
	279	err = usb_add_hcd(hcd, irq, IRQF_SHARED \| IRQF_DISABLED);
	280	if (err)
	281	goto err4;
	282
	283	return 0;
	284
	285	err4:
	286	usb_put_hcd(hcd);
	287	err3:
	288	iounmap(regs);
	289	err2:
	290	release_mem_region(res->start, res->end - res->start + 1);
	291	err1:
	292	dev_err(&pdev->dev, "init %s fail, %d\n",
7071a3ce	293	dev_name(&pdev->dev), err);
e96ffe2f TP	294
	295	return err;
	296	}
	297
	298	static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
	299	{
	300	struct usb_hcd *hcd = platform_get_drvdata(pdev);
	301
	302	usb_remove_hcd(hcd);
	303	iounmap(hcd->regs);
	304	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
	305	usb_put_hcd(hcd);
	306
	307	return 0;
	308	}
	309
	310	MODULE_ALIAS("platform:orion-ehci");
	311
	312	static struct platform_driver ehci_orion_driver = {
	313	.probe = ehci_orion_drv_probe,
	314	.remove = __exit_p(ehci_orion_drv_remove),
	315	.shutdown = usb_hcd_platform_shutdown,
	316	.driver.name = "orion-ehci",
	317	};