[linux-2.6-block.git] / drivers / usb / host / bcma-hcd.c

/*
 * Broadcom specific Advanced Microcontroller Bus
 * Broadcom USB-core driver (BCMA bus glue)
 *
 * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
 *
 * Based on ssb-ohci driver
 * Copyright 2007 Michael Buesch <m@bues.ch>
 *
 * Derived from the OHCI-PCI driver
 * Copyright 1999 Roman Weissgaerber
 * Copyright 2000-2002 David Brownell
 * Copyright 1999 Linus Torvalds
 * Copyright 1999 Gregory P. Smith
 *
 * Derived from the USBcore related parts of Broadcom-SB
 * Copyright 2005-2011 Broadcom Corporation
 *
 * Licensed under the GNU/GPL. See COPYING for details.
 */
#include <linux/bcma/bcma.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>

MODULE_AUTHOR("Hauke Mehrtens");
MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
MODULE_LICENSE("GPL");

struct bcma_hcd_device {
	struct platform_device *ehci_dev;
	struct platform_device *ohci_dev;
};

/* Wait for bitmask in a register to get set or cleared.
 * timeout is in units of ten-microseconds.
 */
static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
			  int timeout)
{
	int i;
	u32 val;

	for (i = 0; i < timeout; i++) {
		val = bcma_read32(dev, reg);
		if ((val & bitmask) == bitmask)
			return 0;
		udelay(10);
	}

	return -ETIMEDOUT;
}

static void bcma_hcd_4716wa(struct bcma_device *dev)
{
#ifdef CONFIG_BCMA_DRIVER_MIPS
	/* Work around for 4716 failures. */
	if (dev->bus->chipinfo.id == 0x4716) {
		u32 tmp;

		tmp = bcma_cpu_clock(&dev->bus->drv_mips);
		if (tmp >= 480000000)
			tmp = 0x1846b; /* set CDR to 0x11(fast) */
		else if (tmp == 453000000)
			tmp = 0x1046b; /* set CDR to 0x10(slow) */
		else
			tmp = 0;

		/* Change Shim mdio control reg to fix host not acking at
		 * high frequencies
		 */
		if (tmp) {
			bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
			udelay(500);

			bcma_write32(dev, 0x524, tmp);
			udelay(500);
			bcma_write32(dev, 0x524, 0x4ab);
			udelay(500);
			bcma_read32(dev, 0x528);
			bcma_write32(dev, 0x528, 0x80000000);
		}
	}
#endif /* CONFIG_BCMA_DRIVER_MIPS */
}

/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
static void bcma_hcd_init_chip(struct bcma_device *dev)
{
	u32 tmp;

	/*
	 * USB 2.0 special considerations:
	 *
	 * 1. Since the core supports both OHCI and EHCI functions, it must
	 *    only be reset once.
	 *
	 * 2. In addition to the standard SI reset sequence, the Host Control
	 *    Register must be programmed to bring the USB core and various
	 *    phy components out of reset.
	 */
	if (!bcma_core_is_enabled(dev)) {
		bcma_core_enable(dev, 0);
		mdelay(10);
		if (dev->id.rev >= 5) {
			/* Enable Misc PLL */
			tmp = bcma_read32(dev, 0x1e0);
			tmp |= 0x100;
			bcma_write32(dev, 0x1e0, tmp);
			if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
				printk(KERN_EMERG "Failed to enable misc PPL!\n");

			/* Take out of resets */
			bcma_write32(dev, 0x200, 0x4ff);
			udelay(25);
			bcma_write32(dev, 0x200, 0x6ff);
			udelay(25);

			/* Make sure digital and AFE are locked in USB PHY */
			bcma_write32(dev, 0x524, 0x6b);
			udelay(50);
			tmp = bcma_read32(dev, 0x524);
			udelay(50);
			bcma_write32(dev, 0x524, 0xab);
			udelay(50);
			tmp = bcma_read32(dev, 0x524);
			udelay(50);
			bcma_write32(dev, 0x524, 0x2b);
			udelay(50);
			tmp = bcma_read32(dev, 0x524);
			udelay(50);
			bcma_write32(dev, 0x524, 0x10ab);
			udelay(50);
			tmp = bcma_read32(dev, 0x524);

			if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
				tmp = bcma_read32(dev, 0x528);
				printk(KERN_EMERG
				       "USB20H mdio_rddata 0x%08x\n", tmp);
			}
			bcma_write32(dev, 0x528, 0x80000000);
			tmp = bcma_read32(dev, 0x314);
			udelay(265);
			bcma_write32(dev, 0x200, 0x7ff);
			udelay(10);

			/* Take USB and HSIC out of non-driving modes */
			bcma_write32(dev, 0x510, 0);
		} else {
			bcma_write32(dev, 0x200, 0x7ff);

			udelay(1);
		}

		bcma_hcd_4716wa(dev);
	}
}

static const struct usb_ehci_pdata ehci_pdata = {
};

static const struct usb_ohci_pdata ohci_pdata = {
};

static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
{
	struct platform_device *hci_dev;
	struct resource hci_res[2];
	int ret = -ENOMEM;

	memset(hci_res, 0, sizeof(hci_res));

	hci_res[0].start = addr;
	hci_res[0].end = hci_res[0].start + 0x1000 - 1;
	hci_res[0].flags = IORESOURCE_MEM;

	hci_res[1].start = dev->irq;
	hci_res[1].flags = IORESOURCE_IRQ;

	hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
					"ehci-platform" , 0);
	if (!hci_dev)
		return NULL;

	hci_dev->dev.parent = &dev->dev;
	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;

	ret = platform_device_add_resources(hci_dev, hci_res,
					    ARRAY_SIZE(hci_res));
	if (ret)
		goto err_alloc;
	if (ohci)
		ret = platform_device_add_data(hci_dev, &ohci_pdata,
					       sizeof(ohci_pdata));
	else
		ret = platform_device_add_data(hci_dev, &ehci_pdata,
					       sizeof(ehci_pdata));
	if (ret)
		goto err_alloc;
	ret = platform_device_add(hci_dev);
	if (ret)
		goto err_alloc;

	return hci_dev;

err_alloc:
	platform_device_put(hci_dev);
	return ERR_PTR(ret);
}

static int bcma_hcd_probe(struct bcma_device *dev)
{
	int err;
	u16 chipid_top;
	u32 ohci_addr;
	struct bcma_hcd_device *usb_dev;
	struct bcma_chipinfo *chipinfo;

	chipinfo = &dev->bus->chipinfo;
	/* USBcores are only connected on embedded devices. */
	chipid_top = (chipinfo->id & 0xFF00);
	if (chipid_top != 0x4700 && chipid_top != 0x5300)
		return -ENODEV;

	/* TODO: Probably need checks here; is the core connected? */

	if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
		return -EOPNOTSUPP;

	usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
	if (!usb_dev)
		return -ENOMEM;

	bcma_hcd_init_chip(dev);

	/* In AI chips EHCI is addrspace 0, OHCI is 1 */
	ohci_addr = dev->addr_s[0];
	if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
	    && chipinfo->rev == 0)
		ohci_addr = 0x18009000;

	usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
	if (IS_ERR(usb_dev->ohci_dev)) {
		err = PTR_ERR(usb_dev->ohci_dev);
		goto err_free_usb_dev;
	}

	usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
	if (IS_ERR(usb_dev->ehci_dev)) {
		err = PTR_ERR(usb_dev->ehci_dev);
		goto err_unregister_ohci_dev;
	}

	bcma_set_drvdata(dev, usb_dev);
	return 0;

err_unregister_ohci_dev:
	platform_device_unregister(usb_dev->ohci_dev);
err_free_usb_dev:
	kfree(usb_dev);
	return err;
}

static void bcma_hcd_remove(struct bcma_device *dev)
{
	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
	struct platform_device *ohci_dev = usb_dev->ohci_dev;
	struct platform_device *ehci_dev = usb_dev->ehci_dev;

	if (ohci_dev)
		platform_device_unregister(ohci_dev);
	if (ehci_dev)
		platform_device_unregister(ehci_dev);

	bcma_core_disable(dev, 0);
}

static void bcma_hcd_shutdown(struct bcma_device *dev)
{
	bcma_core_disable(dev, 0);
}

#ifdef CONFIG_PM

static int bcma_hcd_suspend(struct bcma_device *dev)
{
	bcma_core_disable(dev, 0);

	return 0;
}

static int bcma_hcd_resume(struct bcma_device *dev)
{
	bcma_core_enable(dev, 0);

	return 0;
}

#else /* !CONFIG_PM */
#define bcma_hcd_suspend	NULL
#define bcma_hcd_resume	NULL
#endif /* CONFIG_PM */

static const struct bcma_device_id bcma_hcd_table[] = {
	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
	BCMA_CORETABLE_END
};
MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);

static struct bcma_driver bcma_hcd_driver = {
	.name		= KBUILD_MODNAME,
	.id_table	= bcma_hcd_table,
	.probe		= bcma_hcd_probe,
	.remove		= bcma_hcd_remove,
	.shutdown	= bcma_hcd_shutdown,
	.suspend	= bcma_hcd_suspend,
	.resume		= bcma_hcd_resume,
};

static int __init bcma_hcd_init(void)
{
	return bcma_driver_register(&bcma_hcd_driver);
}
module_init(bcma_hcd_init);

static void __exit bcma_hcd_exit(void)
{
	bcma_driver_unregister(&bcma_hcd_driver);
}
module_exit(bcma_hcd_exit);
Commit	Line	Data
62e11d1b HM	1	/*
	2	* Broadcom specific Advanced Microcontroller Bus
	3	* Broadcom USB-core driver (BCMA bus glue)
	4	*
	5	* Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
	6	*
	7	* Based on ssb-ohci driver
	8	* Copyright 2007 Michael Buesch <m@bues.ch>
	9	*
	10	* Derived from the OHCI-PCI driver
	11	* Copyright 1999 Roman Weissgaerber
	12	* Copyright 2000-2002 David Brownell
	13	* Copyright 1999 Linus Torvalds
	14	* Copyright 1999 Gregory P. Smith
	15	*
	16	* Derived from the USBcore related parts of Broadcom-SB
	17	* Copyright 2005-2011 Broadcom Corporation
	18	*
	19	* Licensed under the GNU/GPL. See COPYING for details.
	20	*/
	21	#include <linux/bcma/bcma.h>
	22	#include <linux/delay.h>
	23	#include <linux/platform_device.h>
	24	#include <linux/module.h>
6ba0d809	25	#include <linux/slab.h>
62e11d1b HM	26	#include <linux/usb/ehci_pdriver.h>
	27	#include <linux/usb/ohci_pdriver.h>
	28
	29	MODULE_AUTHOR("Hauke Mehrtens");
	30	MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
	31	MODULE_LICENSE("GPL");
	32
	33	struct bcma_hcd_device {
	34	struct platform_device *ehci_dev;
	35	struct platform_device *ohci_dev;
	36	};
	37
	38	/* Wait for bitmask in a register to get set or cleared.
	39	* timeout is in units of ten-microseconds.
	40	*/
	41	static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
	42	int timeout)
	43	{
	44	int i;
	45	u32 val;
	46
	47	for (i = 0; i < timeout; i++) {
	48	val = bcma_read32(dev, reg);
	49	if ((val & bitmask) == bitmask)
	50	return 0;
	51	udelay(10);
	52	}
	53
	54	return -ETIMEDOUT;
	55	}
	56
41ac7b3a	57	static void bcma_hcd_4716wa(struct bcma_device *dev)
62e11d1b HM	58	{
	59	#ifdef CONFIG_BCMA_DRIVER_MIPS
	60	/* Work around for 4716 failures. */
	61	if (dev->bus->chipinfo.id == 0x4716) {
	62	u32 tmp;
	63
	64	tmp = bcma_cpu_clock(&dev->bus->drv_mips);
	65	if (tmp >= 480000000)
	66	tmp = 0x1846b; /* set CDR to 0x11(fast) */
	67	else if (tmp == 453000000)
	68	tmp = 0x1046b; /* set CDR to 0x10(slow) */
	69	else
	70	tmp = 0;
	71
	72	/* Change Shim mdio control reg to fix host not acking at
	73	* high frequencies
	74	*/
	75	if (tmp) {
	76	bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
	77	udelay(500);
	78
	79	bcma_write32(dev, 0x524, tmp);
	80	udelay(500);
	81	bcma_write32(dev, 0x524, 0x4ab);
	82	udelay(500);
	83	bcma_read32(dev, 0x528);
	84	bcma_write32(dev, 0x528, 0x80000000);
	85	}
	86	}
	87	#endif /* CONFIG_BCMA_DRIVER_MIPS */
	88	}
	89
	90	/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
41ac7b3a	91	static void bcma_hcd_init_chip(struct bcma_device *dev)
62e11d1b HM	92	{
	93	u32 tmp;
	94
	95	/*
	96	* USB 2.0 special considerations:
	97	*
	98	* 1. Since the core supports both OHCI and EHCI functions, it must
	99	* only be reset once.
	100	*
	101	* 2. In addition to the standard SI reset sequence, the Host Control
	102	* Register must be programmed to bring the USB core and various
	103	* phy components out of reset.
	104	*/
	105	if (!bcma_core_is_enabled(dev)) {
	106	bcma_core_enable(dev, 0);
	107	mdelay(10);
	108	if (dev->id.rev >= 5) {
	109	/* Enable Misc PLL */
	110	tmp = bcma_read32(dev, 0x1e0);
	111	tmp \|= 0x100;
	112	bcma_write32(dev, 0x1e0, tmp);
	113	if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
	114	printk(KERN_EMERG "Failed to enable misc PPL!\n");
	115
	116	/* Take out of resets */
	117	bcma_write32(dev, 0x200, 0x4ff);
	118	udelay(25);
	119	bcma_write32(dev, 0x200, 0x6ff);
	120	udelay(25);
	121
	122	/* Make sure digital and AFE are locked in USB PHY */
	123	bcma_write32(dev, 0x524, 0x6b);
	124	udelay(50);
	125	tmp = bcma_read32(dev, 0x524);
	126	udelay(50);
	127	bcma_write32(dev, 0x524, 0xab);
	128	udelay(50);
	129	tmp = bcma_read32(dev, 0x524);
	130	udelay(50);
	131	bcma_write32(dev, 0x524, 0x2b);
	132	udelay(50);
	133	tmp = bcma_read32(dev, 0x524);
	134	udelay(50);
	135	bcma_write32(dev, 0x524, 0x10ab);
	136	udelay(50);
	137	tmp = bcma_read32(dev, 0x524);
	138
	139	if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
	140	tmp = bcma_read32(dev, 0x528);
	141	printk(KERN_EMERG
	142	"USB20H mdio_rddata 0x%08x\n", tmp);
	143	}
	144	bcma_write32(dev, 0x528, 0x80000000);
	145	tmp = bcma_read32(dev, 0x314);
	146	udelay(265);
	147	bcma_write32(dev, 0x200, 0x7ff);
	148	udelay(10);
	149
	150	/* Take USB and HSIC out of non-driving modes */
	151	bcma_write32(dev, 0x510, 0);
	152	} else {
	153	bcma_write32(dev, 0x200, 0x7ff);
	154
	155	udelay(1);
156	}
157
158	bcma_hcd_4716wa(dev);
159	}
160	}
161
162	static const struct usb_ehci_pdata ehci_pdata = {
163	};
164
165	static const struct usb_ohci_pdata ohci_pdata = {
166	};
167
41ac7b3a	168	static struct platform_device bcma_hcd_create_pdev(struct bcma_device dev, bool ohci, u32 addr)
62e11d1b HM	169	{
	170	struct platform_device *hci_dev;
	171	struct resource hci_res[2];
	172	int ret = -ENOMEM;
	173
	174	memset(hci_res, 0, sizeof(hci_res));
	175
	176	hci_res[0].start = addr;
	177	hci_res[0].end = hci_res[0].start + 0x1000 - 1;
	178	hci_res[0].flags = IORESOURCE_MEM;
	179
	180	hci_res[1].start = dev->irq;
	181	hci_res[1].flags = IORESOURCE_IRQ;
	182
	183	hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
	184	"ehci-platform" , 0);
	185	if (!hci_dev)
	186	return NULL;
	187
	188	hci_dev->dev.parent = &dev->dev;
	189	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
	190
	191	ret = platform_device_add_resources(hci_dev, hci_res,
	192	ARRAY_SIZE(hci_res));
	193	if (ret)
	194	goto err_alloc;
	195	if (ohci)
	196	ret = platform_device_add_data(hci_dev, &ohci_pdata,
	197	sizeof(ohci_pdata));
	198	else
	199	ret = platform_device_add_data(hci_dev, &ehci_pdata,
	200	sizeof(ehci_pdata));
	201	if (ret)
	202	goto err_alloc;
	203	ret = platform_device_add(hci_dev);
	204	if (ret)
	205	goto err_alloc;
	206
	207	return hci_dev;
	208
	209	err_alloc:
	210	platform_device_put(hci_dev);
	211	return ERR_PTR(ret);
	212	}
	213
41ac7b3a	214	static int bcma_hcd_probe(struct bcma_device *dev)
62e11d1b HM	215	{
	216	int err;
	217	u16 chipid_top;
	218	u32 ohci_addr;
	219	struct bcma_hcd_device *usb_dev;
	220	struct bcma_chipinfo *chipinfo;
	221
	222	chipinfo = &dev->bus->chipinfo;
	223	/* USBcores are only connected on embedded devices. */
	224	chipid_top = (chipinfo->id & 0xFF00);
	225	if (chipid_top != 0x4700 && chipid_top != 0x5300)
	226	return -ENODEV;
	227
	228	/* TODO: Probably need checks here; is the core connected? */
	229
d288059e	230	if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
62e11d1b HM	231	return -EOPNOTSUPP;
	232
	233	usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
	234	if (!usb_dev)
	235	return -ENOMEM;
	236
	237	bcma_hcd_init_chip(dev);
	238
	239	/* In AI chips EHCI is addrspace 0, OHCI is 1 */
23a2f39c	240	ohci_addr = dev->addr_s[0];
62e11d1b HM	241	if ((chipinfo->id == 0x5357 \|\| chipinfo->id == 0x4749)
	242	&& chipinfo->rev == 0)
	243	ohci_addr = 0x18009000;
	244
	245	usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
	246	if (IS_ERR(usb_dev->ohci_dev)) {
	247	err = PTR_ERR(usb_dev->ohci_dev);
	248	goto err_free_usb_dev;
	249	}
	250
	251	usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
	252	if (IS_ERR(usb_dev->ehci_dev)) {
	253	err = PTR_ERR(usb_dev->ehci_dev);
	254	goto err_unregister_ohci_dev;
	255	}
	256
	257	bcma_set_drvdata(dev, usb_dev);
	258	return 0;
	259
	260	err_unregister_ohci_dev:
	261	platform_device_unregister(usb_dev->ohci_dev);
	262	err_free_usb_dev:
	263	kfree(usb_dev);
	264	return err;
	265	}
	266
fb4e98ab	267	static void bcma_hcd_remove(struct bcma_device *dev)
62e11d1b HM	268	{
	269	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
	270	struct platform_device *ohci_dev = usb_dev->ohci_dev;
	271	struct platform_device *ehci_dev = usb_dev->ehci_dev;
	272
	273	if (ohci_dev)
	274	platform_device_unregister(ohci_dev);
	275	if (ehci_dev)
	276	platform_device_unregister(ehci_dev);
	277
	278	bcma_core_disable(dev, 0);
	279	}
	280
	281	static void bcma_hcd_shutdown(struct bcma_device *dev)
	282	{
	283	bcma_core_disable(dev, 0);
	284	}
	285
	286	#ifdef CONFIG_PM
	287
1f6155f5	288	static int bcma_hcd_suspend(struct bcma_device *dev)
62e11d1b HM	289	{
	290	bcma_core_disable(dev, 0);
	291
	292	return 0;
	293	}
	294
	295	static int bcma_hcd_resume(struct bcma_device *dev)
	296	{
	297	bcma_core_enable(dev, 0);
	298
	299	return 0;
	300	}
	301
	302	#else /* !CONFIG_PM */
	303	#define bcma_hcd_suspend NULL
	304	#define bcma_hcd_resume NULL
	305	#endif /* CONFIG_PM */
	306
2f82686e	307	static const struct bcma_device_id bcma_hcd_table[] = {
62e11d1b HM	308	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
	309	BCMA_CORETABLE_END
	310	};
	311	MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
	312
	313	static struct bcma_driver bcma_hcd_driver = {
	314	.name = KBUILD_MODNAME,
	315	.id_table = bcma_hcd_table,
	316	.probe = bcma_hcd_probe,
7690417d	317	.remove = bcma_hcd_remove,
62e11d1b HM	318	.shutdown = bcma_hcd_shutdown,
	319	.suspend = bcma_hcd_suspend,
	320	.resume = bcma_hcd_resume,
	321	};
	322
	323	static int __init bcma_hcd_init(void)
	324	{
	325	return bcma_driver_register(&bcma_hcd_driver);
	326	}
	327	module_init(bcma_hcd_init);
	328
	329	static void __exit bcma_hcd_exit(void)
	330	{
	331	bcma_driver_unregister(&bcma_hcd_driver);
	332	}
	333	module_exit(bcma_hcd_exit);