Commit | Line | Data |
---|---|---|
d5e2b67a MN |
1 | /* |
2 | * file_storage.c -- File-backed USB Storage Gadget, for USB development | |
3 | * | |
4 | * Copyright (C) 2003-2008 Alan Stern | |
5 | * All rights reserved. | |
6 | * | |
7 | * Redistribution and use in source and binary forms, with or without | |
8 | * modification, are permitted provided that the following conditions | |
9 | * are met: | |
10 | * 1. Redistributions of source code must retain the above copyright | |
11 | * notice, this list of conditions, and the following disclaimer, | |
12 | * without modification. | |
13 | * 2. Redistributions in binary form must reproduce the above copyright | |
14 | * notice, this list of conditions and the following disclaimer in the | |
15 | * documentation and/or other materials provided with the distribution. | |
16 | * 3. The names of the above-listed copyright holders may not be used | |
17 | * to endorse or promote products derived from this software without | |
18 | * specific prior written permission. | |
19 | * | |
20 | * ALTERNATIVELY, this software may be distributed under the terms of the | |
21 | * GNU General Public License ("GPL") as published by the Free Software | |
22 | * Foundation, either version 2 of that License or (at your option) any | |
23 | * later version. | |
24 | * | |
25 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS | |
26 | * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, | |
27 | * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR | |
28 | * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR | |
29 | * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, | |
30 | * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, | |
31 | * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR | |
32 | * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
33 | * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
34 | * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
35 | * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
36 | */ | |
37 | ||
38 | ||
39 | /* | |
40 | * The File-backed Storage Gadget acts as a USB Mass Storage device, | |
41 | * appearing to the host as a disk drive or as a CD-ROM drive. In addition | |
42 | * to providing an example of a genuinely useful gadget driver for a USB | |
43 | * device, it also illustrates a technique of double-buffering for increased | |
44 | * throughput. Last but not least, it gives an easy way to probe the | |
45 | * behavior of the Mass Storage drivers in a USB host. | |
46 | * | |
47 | * Backing storage is provided by a regular file or a block device, specified | |
48 | * by the "file" module parameter. Access can be limited to read-only by | |
49 | * setting the optional "ro" module parameter. (For CD-ROM emulation, | |
50 | * access is always read-only.) The gadget will indicate that it has | |
51 | * removable media if the optional "removable" module parameter is set. | |
52 | * | |
d5e2b67a MN |
53 | * There is support for multiple logical units (LUNs), each of which has |
54 | * its own backing file. The number of LUNs can be set using the optional | |
55 | * "luns" module parameter (anywhere from 1 to 8), and the corresponding | |
56 | * files are specified using comma-separated lists for "file" and "ro". | |
57 | * The default number of LUNs is taken from the number of "file" elements; | |
58 | * it is 1 if "file" is not given. If "removable" is not set then a backing | |
59 | * file must be specified for each LUN. If it is set, then an unspecified | |
60 | * or empty backing filename means the LUN's medium is not loaded. Ideally | |
61 | * each LUN would be settable independently as a disk drive or a CD-ROM | |
62 | * drive, but currently all LUNs have to be the same type. The CD-ROM | |
63 | * emulation includes a single data track and no audio tracks; hence there | |
64 | * need be only one backing file per LUN. Note also that the CD-ROM block | |
65 | * length is set to 512 rather than the more common value 2048. | |
66 | * | |
67 | * Requirements are modest; only a bulk-in and a bulk-out endpoint are | |
68 | * needed (an interrupt-out endpoint is also needed for CBI). The memory | |
69 | * requirement amounts to two 16K buffers, size configurable by a parameter. | |
70 | * Support is included for both full-speed and high-speed operation. | |
71 | * | |
72 | * Note that the driver is slightly non-portable in that it assumes a | |
73 | * single memory/DMA buffer will be useable for bulk-in, bulk-out, and | |
74 | * interrupt-in endpoints. With most device controllers this isn't an | |
75 | * issue, but there may be some with hardware restrictions that prevent | |
76 | * a buffer from being used by more than one endpoint. | |
77 | * | |
78 | * Module options: | |
79 | * | |
80 | * file=filename[,filename...] | |
81 | * Required if "removable" is not set, names of | |
82 | * the files or block devices used for | |
83 | * backing storage | |
84 | * ro=b[,b...] Default false, booleans for read-only access | |
85 | * removable Default false, boolean for removable media | |
86 | * luns=N Default N = number of filenames, number of | |
87 | * LUNs to support | |
88 | * stall Default determined according to the type of | |
89 | * USB device controller (usually true), | |
90 | * boolean to permit the driver to halt | |
91 | * bulk endpoints | |
92 | * cdrom Default false, boolean for whether to emulate | |
93 | * a CD-ROM drive | |
d5e2b67a MN |
94 | * |
95 | * The pathnames of the backing files and the ro settings are available in | |
96 | * the attribute files "file" and "ro" in the lun<n> subdirectory of the | |
97 | * gadget's sysfs directory. If the "removable" option is set, writing to | |
98 | * these files will simulate ejecting/loading the medium (writing an empty | |
99 | * line means eject) and adjusting a write-enable tab. Changes to the ro | |
100 | * setting are not allowed when the medium is loaded or if CD-ROM emulation | |
101 | * is being used. | |
102 | * | |
103 | * This gadget driver is heavily based on "Gadget Zero" by David Brownell. | |
104 | * The driver's SCSI command interface was based on the "Information | |
105 | * technology - Small Computer System Interface - 2" document from | |
106 | * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at | |
107 | * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. The single exception | |
108 | * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the | |
109 | * "Universal Serial Bus Mass Storage Class UFI Command Specification" | |
110 | * document, Revision 1.0, December 14, 1998, available at | |
111 | * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. | |
112 | */ | |
113 | ||
114 | ||
115 | /* | |
116 | * Driver Design | |
117 | * | |
118 | * The FSG driver is fairly straightforward. There is a main kernel | |
119 | * thread that handles most of the work. Interrupt routines field | |
120 | * callbacks from the controller driver: bulk- and interrupt-request | |
121 | * completion notifications, endpoint-0 events, and disconnect events. | |
122 | * Completion events are passed to the main thread by wakeup calls. Many | |
123 | * ep0 requests are handled at interrupt time, but SetInterface, | |
124 | * SetConfiguration, and device reset requests are forwarded to the | |
125 | * thread in the form of "exceptions" using SIGUSR1 signals (since they | |
126 | * should interrupt any ongoing file I/O operations). | |
127 | * | |
128 | * The thread's main routine implements the standard command/data/status | |
129 | * parts of a SCSI interaction. It and its subroutines are full of tests | |
130 | * for pending signals/exceptions -- all this polling is necessary since | |
131 | * the kernel has no setjmp/longjmp equivalents. (Maybe this is an | |
132 | * indication that the driver really wants to be running in userspace.) | |
133 | * An important point is that so long as the thread is alive it keeps an | |
134 | * open reference to the backing file. This will prevent unmounting | |
135 | * the backing file's underlying filesystem and could cause problems | |
136 | * during system shutdown, for example. To prevent such problems, the | |
137 | * thread catches INT, TERM, and KILL signals and converts them into | |
138 | * an EXIT exception. | |
139 | * | |
140 | * In normal operation the main thread is started during the gadget's | |
141 | * fsg_bind() callback and stopped during fsg_unbind(). But it can also | |
142 | * exit when it receives a signal, and there's no point leaving the | |
143 | * gadget running when the thread is dead. So just before the thread | |
144 | * exits, it deregisters the gadget driver. This makes things a little | |
145 | * tricky: The driver is deregistered at two places, and the exiting | |
146 | * thread can indirectly call fsg_unbind() which in turn can tell the | |
147 | * thread to exit. The first problem is resolved through the use of the | |
148 | * REGISTERED atomic bitflag; the driver will only be deregistered once. | |
149 | * The second problem is resolved by having fsg_unbind() check | |
150 | * fsg->state; it won't try to stop the thread if the state is already | |
151 | * FSG_STATE_TERMINATED. | |
152 | * | |
153 | * To provide maximum throughput, the driver uses a circular pipeline of | |
154 | * buffer heads (struct fsg_buffhd). In principle the pipeline can be | |
155 | * arbitrarily long; in practice the benefits don't justify having more | |
156 | * than 2 stages (i.e., double buffering). But it helps to think of the | |
157 | * pipeline as being a long one. Each buffer head contains a bulk-in and | |
158 | * a bulk-out request pointer (since the buffer can be used for both | |
159 | * output and input -- directions always are given from the host's | |
160 | * point of view) as well as a pointer to the buffer and various state | |
161 | * variables. | |
162 | * | |
163 | * Use of the pipeline follows a simple protocol. There is a variable | |
164 | * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. | |
165 | * At any time that buffer head may still be in use from an earlier | |
166 | * request, so each buffer head has a state variable indicating whether | |
167 | * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the | |
168 | * buffer head to be EMPTY, filling the buffer either by file I/O or by | |
169 | * USB I/O (during which the buffer head is BUSY), and marking the buffer | |
170 | * head FULL when the I/O is complete. Then the buffer will be emptied | |
171 | * (again possibly by USB I/O, during which it is marked BUSY) and | |
172 | * finally marked EMPTY again (possibly by a completion routine). | |
173 | * | |
174 | * A module parameter tells the driver to avoid stalling the bulk | |
175 | * endpoints wherever the transport specification allows. This is | |
176 | * necessary for some UDCs like the SuperH, which cannot reliably clear a | |
177 | * halt on a bulk endpoint. However, under certain circumstances the | |
178 | * Bulk-only specification requires a stall. In such cases the driver | |
179 | * will halt the endpoint and set a flag indicating that it should clear | |
180 | * the halt in software during the next device reset. Hopefully this | |
181 | * will permit everything to work correctly. Furthermore, although the | |
182 | * specification allows the bulk-out endpoint to halt when the host sends | |
183 | * too much data, implementing this would cause an unavoidable race. | |
184 | * The driver will always use the "no-stall" approach for OUT transfers. | |
185 | * | |
186 | * One subtle point concerns sending status-stage responses for ep0 | |
187 | * requests. Some of these requests, such as device reset, can involve | |
188 | * interrupting an ongoing file I/O operation, which might take an | |
189 | * arbitrarily long time. During that delay the host might give up on | |
190 | * the original ep0 request and issue a new one. When that happens the | |
191 | * driver should not notify the host about completion of the original | |
192 | * request, as the host will no longer be waiting for it. So the driver | |
193 | * assigns to each ep0 request a unique tag, and it keeps track of the | |
194 | * tag value of the request associated with a long-running exception | |
195 | * (device-reset, interface-change, or configuration-change). When the | |
196 | * exception handler is finished, the status-stage response is submitted | |
197 | * only if the current ep0 request tag is equal to the exception request | |
198 | * tag. Thus only the most recently received ep0 request will get a | |
199 | * status-stage response. | |
200 | * | |
201 | * Warning: This driver source file is too long. It ought to be split up | |
202 | * into a header file plus about 3 separate .c files, to handle the details | |
203 | * of the Gadget, USB Mass Storage, and SCSI protocols. | |
204 | */ | |
205 | ||
206 | ||
207 | /* #define VERBOSE_DEBUG */ | |
208 | /* #define DUMP_MSGS */ | |
209 | ||
210 | ||
211 | #include <linux/blkdev.h> | |
212 | #include <linux/completion.h> | |
213 | #include <linux/dcache.h> | |
214 | #include <linux/delay.h> | |
215 | #include <linux/device.h> | |
216 | #include <linux/fcntl.h> | |
217 | #include <linux/file.h> | |
218 | #include <linux/fs.h> | |
219 | #include <linux/kref.h> | |
220 | #include <linux/kthread.h> | |
221 | #include <linux/limits.h> | |
222 | #include <linux/rwsem.h> | |
223 | #include <linux/slab.h> | |
224 | #include <linux/spinlock.h> | |
225 | #include <linux/string.h> | |
226 | #include <linux/freezer.h> | |
227 | #include <linux/utsname.h> | |
228 | ||
229 | #include <linux/usb/ch9.h> | |
230 | #include <linux/usb/gadget.h> | |
231 | ||
232 | #include "gadget_chips.h" | |
233 | ||
234 | ||
235 | ||
236 | /* | |
237 | * Kbuild is not very cooperative with respect to linking separately | |
238 | * compiled library objects into one module. So for now we won't use | |
239 | * separate compilation ... ensuring init/exit sections work to shrink | |
240 | * the runtime footprint, and giving us at least some parts of what | |
241 | * a "gcc --combine ... part1.c part2.c part3.c ... " build would. | |
242 | */ | |
243 | #include "usbstring.c" | |
244 | #include "config.c" | |
245 | #include "epautoconf.c" | |
246 | ||
247 | /*-------------------------------------------------------------------------*/ | |
248 | ||
249 | #define DRIVER_DESC "File-backed Storage Gadget" | |
250 | #define DRIVER_NAME "g_file_storage" | |
251 | #define DRIVER_VERSION "20 November 2008" | |
252 | ||
253 | static char fsg_string_manufacturer[64]; | |
254 | static const char fsg_string_product[] = DRIVER_DESC; | |
255 | static char fsg_string_serial[13]; | |
256 | static const char fsg_string_config[] = "Self-powered"; | |
257 | static const char fsg_string_interface[] = "Mass Storage"; | |
258 | ||
259 | ||
93bcf12e | 260 | #define FSG_NO_INTR_EP 1 |
606206c2 | 261 | #define FSG_BUFFHD_STATIC_BUFFER 1 |
93bcf12e | 262 | |
d5e2b67a MN |
263 | #include "storage_common.c" |
264 | ||
265 | ||
266 | MODULE_DESCRIPTION(DRIVER_DESC); | |
267 | MODULE_AUTHOR("Alan Stern"); | |
268 | MODULE_LICENSE("Dual BSD/GPL"); | |
269 | ||
270 | /* | |
271 | * This driver assumes self-powered hardware and has no way for users to | |
272 | * trigger remote wakeup. It uses autoconfiguration to select endpoints | |
273 | * and endpoint addresses. | |
274 | */ | |
275 | ||
276 | ||
277 | /*-------------------------------------------------------------------------*/ | |
278 | ||
279 | ||
280 | /* Encapsulate the module parameter settings */ | |
281 | ||
282 | static struct { | |
283 | char *file[FSG_MAX_LUNS]; | |
284 | int ro[FSG_MAX_LUNS]; | |
285 | unsigned int num_filenames; | |
286 | unsigned int num_ros; | |
287 | unsigned int nluns; | |
288 | ||
289 | int removable; | |
290 | int can_stall; | |
291 | int cdrom; | |
292 | ||
d5e2b67a | 293 | unsigned short release; |
d5e2b67a | 294 | } mod_data = { // Default values |
d5e2b67a MN |
295 | .removable = 0, |
296 | .can_stall = 1, | |
297 | .cdrom = 0, | |
d5e2b67a MN |
298 | }; |
299 | ||
300 | ||
301 | module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames, | |
302 | S_IRUGO); | |
303 | MODULE_PARM_DESC(file, "names of backing files or devices"); | |
304 | ||
305 | module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO); | |
306 | MODULE_PARM_DESC(ro, "true to force read-only"); | |
307 | ||
308 | module_param_named(luns, mod_data.nluns, uint, S_IRUGO); | |
309 | MODULE_PARM_DESC(luns, "number of LUNs"); | |
310 | ||
311 | module_param_named(removable, mod_data.removable, bool, S_IRUGO); | |
312 | MODULE_PARM_DESC(removable, "true to simulate removable media"); | |
313 | ||
314 | module_param_named(stall, mod_data.can_stall, bool, S_IRUGO); | |
315 | MODULE_PARM_DESC(stall, "false to prevent bulk stalls"); | |
316 | ||
317 | module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO); | |
318 | MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk"); | |
319 | ||
320 | ||
d5e2b67a MN |
321 | /*-------------------------------------------------------------------------*/ |
322 | ||
323 | ||
a41ae418 MN |
324 | /* Data shared by all the FSG instances. */ |
325 | struct fsg_common { | |
326 | /* filesem protects: backing files in use */ | |
327 | struct rw_semaphore filesem; | |
328 | ||
329 | struct fsg_buffhd *next_buffhd_to_fill; | |
330 | struct fsg_buffhd *next_buffhd_to_drain; | |
331 | struct fsg_buffhd buffhds[FSG_NUM_BUFFERS]; | |
332 | ||
333 | int cmnd_size; | |
334 | u8 cmnd[MAX_COMMAND_SIZE]; | |
335 | ||
336 | unsigned int nluns; | |
337 | unsigned int lun; | |
338 | struct fsg_lun *luns; | |
339 | struct fsg_lun *curlun; | |
340 | }; | |
341 | ||
342 | ||
d5e2b67a | 343 | struct fsg_dev { |
a41ae418 MN |
344 | struct fsg_common *common; |
345 | ||
346 | /* lock protects: state, all the req_busy's */ | |
d5e2b67a MN |
347 | spinlock_t lock; |
348 | struct usb_gadget *gadget; | |
349 | ||
d5e2b67a MN |
350 | /* reference counting: wait until all LUNs are released */ |
351 | struct kref ref; | |
352 | ||
353 | struct usb_ep *ep0; // Handy copy of gadget->ep0 | |
354 | struct usb_request *ep0req; // For control responses | |
355 | unsigned int ep0_req_tag; | |
356 | const char *ep0req_name; | |
357 | ||
d5e2b67a MN |
358 | unsigned int bulk_out_maxpacket; |
359 | enum fsg_state state; // For exception handling | |
360 | unsigned int exception_req_tag; | |
361 | ||
362 | u8 config, new_config; | |
363 | ||
364 | unsigned int running : 1; | |
365 | unsigned int bulk_in_enabled : 1; | |
366 | unsigned int bulk_out_enabled : 1; | |
d5e2b67a MN |
367 | unsigned int phase_error : 1; |
368 | unsigned int short_packet_received : 1; | |
369 | unsigned int bad_lun_okay : 1; | |
370 | ||
371 | unsigned long atomic_bitflags; | |
372 | #define REGISTERED 0 | |
373 | #define IGNORE_BULK_OUT 1 | |
d5e2b67a MN |
374 | |
375 | struct usb_ep *bulk_in; | |
376 | struct usb_ep *bulk_out; | |
d5e2b67a | 377 | |
d5e2b67a MN |
378 | int thread_wakeup_needed; |
379 | struct completion thread_notifier; | |
380 | struct task_struct *thread_task; | |
381 | ||
d5e2b67a MN |
382 | enum data_direction data_dir; |
383 | u32 data_size; | |
384 | u32 data_size_from_cmnd; | |
385 | u32 tag; | |
d5e2b67a MN |
386 | u32 residue; |
387 | u32 usb_amount_left; | |
d5e2b67a MN |
388 | }; |
389 | ||
390 | typedef void (*fsg_routine_t)(struct fsg_dev *); | |
391 | ||
392 | static int exception_in_progress(struct fsg_dev *fsg) | |
393 | { | |
394 | return (fsg->state > FSG_STATE_IDLE); | |
395 | } | |
396 | ||
397 | /* Make bulk-out requests be divisible by the maxpacket size */ | |
398 | static void set_bulk_out_req_length(struct fsg_dev *fsg, | |
399 | struct fsg_buffhd *bh, unsigned int length) | |
400 | { | |
401 | unsigned int rem; | |
402 | ||
403 | bh->bulk_out_intended_length = length; | |
404 | rem = length % fsg->bulk_out_maxpacket; | |
405 | if (rem > 0) | |
406 | length += fsg->bulk_out_maxpacket - rem; | |
407 | bh->outreq->length = length; | |
408 | } | |
409 | ||
410 | static struct fsg_dev *the_fsg; | |
411 | static struct usb_gadget_driver fsg_driver; | |
412 | ||
413 | ||
414 | /*-------------------------------------------------------------------------*/ | |
415 | ||
416 | static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) | |
417 | { | |
418 | const char *name; | |
419 | ||
420 | if (ep == fsg->bulk_in) | |
421 | name = "bulk-in"; | |
422 | else if (ep == fsg->bulk_out) | |
423 | name = "bulk-out"; | |
424 | else | |
425 | name = ep->name; | |
426 | DBG(fsg, "%s set halt\n", name); | |
427 | return usb_ep_set_halt(ep); | |
428 | } | |
429 | ||
430 | ||
431 | /*-------------------------------------------------------------------------*/ | |
432 | ||
433 | /* | |
434 | * DESCRIPTORS ... most are static, but strings and (full) configuration | |
435 | * descriptors are built on demand. Also the (static) config and interface | |
436 | * descriptors are adjusted during fsg_bind(). | |
437 | */ | |
438 | ||
439 | /* There is only one configuration. */ | |
440 | #define CONFIG_VALUE 1 | |
441 | ||
442 | static struct usb_device_descriptor | |
443 | device_desc = { | |
444 | .bLength = sizeof device_desc, | |
445 | .bDescriptorType = USB_DT_DEVICE, | |
446 | ||
447 | .bcdUSB = cpu_to_le16(0x0200), | |
448 | .bDeviceClass = USB_CLASS_PER_INTERFACE, | |
449 | ||
450 | /* The next three values can be overridden by module parameters */ | |
451 | .idVendor = cpu_to_le16(FSG_VENDOR_ID), | |
452 | .idProduct = cpu_to_le16(FSG_PRODUCT_ID), | |
453 | .bcdDevice = cpu_to_le16(0xffff), | |
454 | ||
455 | .iManufacturer = FSG_STRING_MANUFACTURER, | |
456 | .iProduct = FSG_STRING_PRODUCT, | |
457 | .iSerialNumber = FSG_STRING_SERIAL, | |
458 | .bNumConfigurations = 1, | |
459 | }; | |
460 | ||
461 | static struct usb_config_descriptor | |
462 | config_desc = { | |
463 | .bLength = sizeof config_desc, | |
464 | .bDescriptorType = USB_DT_CONFIG, | |
465 | ||
466 | /* wTotalLength computed by usb_gadget_config_buf() */ | |
467 | .bNumInterfaces = 1, | |
468 | .bConfigurationValue = CONFIG_VALUE, | |
469 | .iConfiguration = FSG_STRING_CONFIG, | |
470 | .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, | |
471 | .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, | |
472 | }; | |
473 | ||
474 | ||
475 | static struct usb_qualifier_descriptor | |
476 | dev_qualifier = { | |
477 | .bLength = sizeof dev_qualifier, | |
478 | .bDescriptorType = USB_DT_DEVICE_QUALIFIER, | |
479 | ||
480 | .bcdUSB = cpu_to_le16(0x0200), | |
481 | .bDeviceClass = USB_CLASS_PER_INTERFACE, | |
482 | ||
483 | .bNumConfigurations = 1, | |
484 | }; | |
485 | ||
486 | ||
487 | ||
488 | /* | |
489 | * Config descriptors must agree with the code that sets configurations | |
490 | * and with code managing interfaces and their altsettings. They must | |
491 | * also handle different speeds and other-speed requests. | |
492 | */ | |
493 | static int populate_config_buf(struct usb_gadget *gadget, | |
494 | u8 *buf, u8 type, unsigned index) | |
495 | { | |
496 | enum usb_device_speed speed = gadget->speed; | |
497 | int len; | |
498 | const struct usb_descriptor_header **function; | |
499 | ||
500 | if (index > 0) | |
501 | return -EINVAL; | |
502 | ||
503 | if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG) | |
504 | speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; | |
505 | if (gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH) | |
506 | function = fsg_hs_function; | |
507 | else | |
508 | function = fsg_fs_function; | |
509 | ||
510 | /* for now, don't advertise srp-only devices */ | |
511 | if (!gadget_is_otg(gadget)) | |
512 | function++; | |
513 | ||
514 | len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function); | |
515 | ((struct usb_config_descriptor *) buf)->bDescriptorType = type; | |
516 | return len; | |
517 | } | |
518 | ||
519 | ||
520 | /*-------------------------------------------------------------------------*/ | |
521 | ||
522 | /* These routines may be called in process context or in_irq */ | |
523 | ||
524 | /* Caller must hold fsg->lock */ | |
525 | static void wakeup_thread(struct fsg_dev *fsg) | |
526 | { | |
527 | /* Tell the main thread that something has happened */ | |
528 | fsg->thread_wakeup_needed = 1; | |
529 | if (fsg->thread_task) | |
530 | wake_up_process(fsg->thread_task); | |
531 | } | |
532 | ||
533 | ||
534 | static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) | |
535 | { | |
536 | unsigned long flags; | |
537 | ||
538 | /* Do nothing if a higher-priority exception is already in progress. | |
539 | * If a lower-or-equal priority exception is in progress, preempt it | |
540 | * and notify the main thread by sending it a signal. */ | |
541 | spin_lock_irqsave(&fsg->lock, flags); | |
542 | if (fsg->state <= new_state) { | |
543 | fsg->exception_req_tag = fsg->ep0_req_tag; | |
544 | fsg->state = new_state; | |
545 | if (fsg->thread_task) | |
546 | send_sig_info(SIGUSR1, SEND_SIG_FORCED, | |
547 | fsg->thread_task); | |
548 | } | |
549 | spin_unlock_irqrestore(&fsg->lock, flags); | |
550 | } | |
551 | ||
552 | ||
553 | /*-------------------------------------------------------------------------*/ | |
554 | ||
555 | /* The disconnect callback and ep0 routines. These always run in_irq, | |
556 | * except that ep0_queue() is called in the main thread to acknowledge | |
557 | * completion of various requests: set config, set interface, and | |
558 | * Bulk-only device reset. */ | |
559 | ||
560 | static void fsg_disconnect(struct usb_gadget *gadget) | |
561 | { | |
562 | struct fsg_dev *fsg = get_gadget_data(gadget); | |
563 | ||
564 | DBG(fsg, "disconnect or port reset\n"); | |
565 | raise_exception(fsg, FSG_STATE_DISCONNECT); | |
566 | } | |
567 | ||
568 | ||
569 | static int ep0_queue(struct fsg_dev *fsg) | |
570 | { | |
571 | int rc; | |
572 | ||
573 | rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC); | |
574 | if (rc != 0 && rc != -ESHUTDOWN) { | |
575 | ||
576 | /* We can't do much more than wait for a reset */ | |
577 | WARNING(fsg, "error in submission: %s --> %d\n", | |
578 | fsg->ep0->name, rc); | |
579 | } | |
580 | return rc; | |
581 | } | |
582 | ||
583 | static void ep0_complete(struct usb_ep *ep, struct usb_request *req) | |
584 | { | |
585 | struct fsg_dev *fsg = ep->driver_data; | |
586 | ||
587 | if (req->actual > 0) | |
588 | dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual); | |
589 | if (req->status || req->actual != req->length) | |
590 | DBG(fsg, "%s --> %d, %u/%u\n", __func__, | |
591 | req->status, req->actual, req->length); | |
592 | if (req->status == -ECONNRESET) // Request was cancelled | |
593 | usb_ep_fifo_flush(ep); | |
594 | ||
595 | if (req->status == 0 && req->context) | |
596 | ((fsg_routine_t) (req->context))(fsg); | |
597 | } | |
598 | ||
599 | ||
600 | /*-------------------------------------------------------------------------*/ | |
601 | ||
602 | /* Bulk and interrupt endpoint completion handlers. | |
603 | * These always run in_irq. */ | |
604 | ||
605 | static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) | |
606 | { | |
607 | struct fsg_dev *fsg = ep->driver_data; | |
608 | struct fsg_buffhd *bh = req->context; | |
609 | ||
610 | if (req->status || req->actual != req->length) | |
611 | DBG(fsg, "%s --> %d, %u/%u\n", __func__, | |
612 | req->status, req->actual, req->length); | |
613 | if (req->status == -ECONNRESET) // Request was cancelled | |
614 | usb_ep_fifo_flush(ep); | |
615 | ||
616 | /* Hold the lock while we update the request and buffer states */ | |
617 | smp_wmb(); | |
618 | spin_lock(&fsg->lock); | |
619 | bh->inreq_busy = 0; | |
620 | bh->state = BUF_STATE_EMPTY; | |
621 | wakeup_thread(fsg); | |
622 | spin_unlock(&fsg->lock); | |
623 | } | |
624 | ||
625 | static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) | |
626 | { | |
627 | struct fsg_dev *fsg = ep->driver_data; | |
628 | struct fsg_buffhd *bh = req->context; | |
629 | ||
630 | dump_msg(fsg, "bulk-out", req->buf, req->actual); | |
631 | if (req->status || req->actual != bh->bulk_out_intended_length) | |
632 | DBG(fsg, "%s --> %d, %u/%u\n", __func__, | |
633 | req->status, req->actual, | |
634 | bh->bulk_out_intended_length); | |
635 | if (req->status == -ECONNRESET) // Request was cancelled | |
636 | usb_ep_fifo_flush(ep); | |
637 | ||
638 | /* Hold the lock while we update the request and buffer states */ | |
639 | smp_wmb(); | |
640 | spin_lock(&fsg->lock); | |
641 | bh->outreq_busy = 0; | |
642 | bh->state = BUF_STATE_FULL; | |
643 | wakeup_thread(fsg); | |
644 | spin_unlock(&fsg->lock); | |
645 | } | |
646 | ||
647 | ||
d5e2b67a MN |
648 | /*-------------------------------------------------------------------------*/ |
649 | ||
650 | /* Ep0 class-specific handlers. These always run in_irq. */ | |
651 | ||
d5e2b67a MN |
652 | static int class_setup_req(struct fsg_dev *fsg, |
653 | const struct usb_ctrlrequest *ctrl) | |
654 | { | |
655 | struct usb_request *req = fsg->ep0req; | |
d5e2b67a | 656 | u16 w_index = le16_to_cpu(ctrl->wIndex); |
93bcf12e | 657 | u16 w_value = le16_to_cpu(ctrl->wValue); |
d5e2b67a MN |
658 | u16 w_length = le16_to_cpu(ctrl->wLength); |
659 | ||
660 | if (!fsg->config) | |
93bcf12e | 661 | return -EOPNOTSUPP; |
d5e2b67a | 662 | |
93bcf12e | 663 | switch (ctrl->bRequest) { |
d5e2b67a | 664 | |
93bcf12e MN |
665 | case USB_BULK_RESET_REQUEST: |
666 | if (ctrl->bRequestType != | |
667 | (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) | |
d5e2b67a | 668 | break; |
93bcf12e MN |
669 | if (w_index != 0 || w_value != 0) |
670 | return -EDOM; | |
d5e2b67a | 671 | |
93bcf12e MN |
672 | /* Raise an exception to stop the current operation |
673 | * and reinitialize our state. */ | |
674 | DBG(fsg, "bulk reset request\n"); | |
675 | raise_exception(fsg, FSG_STATE_RESET); | |
676 | return DELAYED_STATUS; | |
d5e2b67a | 677 | |
93bcf12e MN |
678 | case USB_BULK_GET_MAX_LUN_REQUEST: |
679 | if (ctrl->bRequestType != | |
680 | (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) | |
d5e2b67a | 681 | break; |
93bcf12e MN |
682 | if (w_index != 0 || w_value != 0) |
683 | return -EDOM; | |
684 | VDBG(fsg, "get max LUN\n"); | |
a41ae418 | 685 | *(u8 *) req->buf = fsg->common->nluns - 1; |
93bcf12e MN |
686 | return 1; |
687 | } | |
688 | ||
689 | VDBG(fsg, | |
690 | "unknown class-specific control req " | |
691 | "%02x.%02x v%04x i%04x l%u\n", | |
692 | ctrl->bRequestType, ctrl->bRequest, | |
693 | le16_to_cpu(ctrl->wValue), w_index, w_length); | |
694 | return -EOPNOTSUPP; | |
d5e2b67a MN |
695 | } |
696 | ||
697 | ||
698 | /*-------------------------------------------------------------------------*/ | |
699 | ||
700 | /* Ep0 standard request handlers. These always run in_irq. */ | |
701 | ||
702 | static int standard_setup_req(struct fsg_dev *fsg, | |
703 | const struct usb_ctrlrequest *ctrl) | |
704 | { | |
705 | struct usb_request *req = fsg->ep0req; | |
706 | int value = -EOPNOTSUPP; | |
707 | u16 w_index = le16_to_cpu(ctrl->wIndex); | |
708 | u16 w_value = le16_to_cpu(ctrl->wValue); | |
709 | ||
710 | /* Usually this just stores reply data in the pre-allocated ep0 buffer, | |
711 | * but config change events will also reconfigure hardware. */ | |
712 | switch (ctrl->bRequest) { | |
713 | ||
714 | case USB_REQ_GET_DESCRIPTOR: | |
715 | if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | | |
716 | USB_RECIP_DEVICE)) | |
717 | break; | |
718 | switch (w_value >> 8) { | |
719 | ||
720 | case USB_DT_DEVICE: | |
721 | VDBG(fsg, "get device descriptor\n"); | |
722 | value = sizeof device_desc; | |
723 | memcpy(req->buf, &device_desc, value); | |
724 | break; | |
725 | case USB_DT_DEVICE_QUALIFIER: | |
726 | VDBG(fsg, "get device qualifier\n"); | |
727 | if (!gadget_is_dualspeed(fsg->gadget)) | |
728 | break; | |
729 | value = sizeof dev_qualifier; | |
730 | memcpy(req->buf, &dev_qualifier, value); | |
731 | break; | |
732 | ||
733 | case USB_DT_OTHER_SPEED_CONFIG: | |
734 | VDBG(fsg, "get other-speed config descriptor\n"); | |
735 | if (!gadget_is_dualspeed(fsg->gadget)) | |
736 | break; | |
737 | goto get_config; | |
738 | case USB_DT_CONFIG: | |
739 | VDBG(fsg, "get configuration descriptor\n"); | |
740 | get_config: | |
741 | value = populate_config_buf(fsg->gadget, | |
742 | req->buf, | |
743 | w_value >> 8, | |
744 | w_value & 0xff); | |
745 | break; | |
746 | ||
747 | case USB_DT_STRING: | |
748 | VDBG(fsg, "get string descriptor\n"); | |
749 | ||
750 | /* wIndex == language code */ | |
751 | value = usb_gadget_get_string(&fsg_stringtab, | |
752 | w_value & 0xff, req->buf); | |
753 | break; | |
754 | } | |
755 | break; | |
756 | ||
757 | /* One config, two speeds */ | |
758 | case USB_REQ_SET_CONFIGURATION: | |
759 | if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | | |
760 | USB_RECIP_DEVICE)) | |
761 | break; | |
762 | VDBG(fsg, "set configuration\n"); | |
763 | if (w_value == CONFIG_VALUE || w_value == 0) { | |
764 | fsg->new_config = w_value; | |
765 | ||
766 | /* Raise an exception to wipe out previous transaction | |
767 | * state (queued bufs, etc) and set the new config. */ | |
768 | raise_exception(fsg, FSG_STATE_CONFIG_CHANGE); | |
769 | value = DELAYED_STATUS; | |
770 | } | |
771 | break; | |
772 | case USB_REQ_GET_CONFIGURATION: | |
773 | if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | | |
774 | USB_RECIP_DEVICE)) | |
775 | break; | |
776 | VDBG(fsg, "get configuration\n"); | |
777 | *(u8 *) req->buf = fsg->config; | |
778 | value = 1; | |
779 | break; | |
780 | ||
781 | case USB_REQ_SET_INTERFACE: | |
782 | if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD | | |
783 | USB_RECIP_INTERFACE)) | |
784 | break; | |
785 | if (fsg->config && w_index == 0) { | |
786 | ||
787 | /* Raise an exception to wipe out previous transaction | |
788 | * state (queued bufs, etc) and install the new | |
789 | * interface altsetting. */ | |
790 | raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE); | |
791 | value = DELAYED_STATUS; | |
792 | } | |
793 | break; | |
794 | case USB_REQ_GET_INTERFACE: | |
795 | if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | | |
796 | USB_RECIP_INTERFACE)) | |
797 | break; | |
798 | if (!fsg->config) | |
799 | break; | |
800 | if (w_index != 0) { | |
801 | value = -EDOM; | |
802 | break; | |
803 | } | |
804 | VDBG(fsg, "get interface\n"); | |
805 | *(u8 *) req->buf = 0; | |
806 | value = 1; | |
807 | break; | |
808 | ||
809 | default: | |
810 | VDBG(fsg, | |
811 | "unknown control req %02x.%02x v%04x i%04x l%u\n", | |
812 | ctrl->bRequestType, ctrl->bRequest, | |
813 | w_value, w_index, le16_to_cpu(ctrl->wLength)); | |
814 | } | |
815 | ||
816 | return value; | |
817 | } | |
818 | ||
819 | ||
820 | static int fsg_setup(struct usb_gadget *gadget, | |
821 | const struct usb_ctrlrequest *ctrl) | |
822 | { | |
823 | struct fsg_dev *fsg = get_gadget_data(gadget); | |
824 | int rc; | |
825 | int w_length = le16_to_cpu(ctrl->wLength); | |
826 | ||
827 | ++fsg->ep0_req_tag; // Record arrival of a new request | |
828 | fsg->ep0req->context = NULL; | |
829 | fsg->ep0req->length = 0; | |
830 | dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); | |
831 | ||
832 | if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) | |
833 | rc = class_setup_req(fsg, ctrl); | |
834 | else | |
835 | rc = standard_setup_req(fsg, ctrl); | |
836 | ||
837 | /* Respond with data/status or defer until later? */ | |
838 | if (rc >= 0 && rc != DELAYED_STATUS) { | |
839 | rc = min(rc, w_length); | |
840 | fsg->ep0req->length = rc; | |
841 | fsg->ep0req->zero = rc < w_length; | |
842 | fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ? | |
843 | "ep0-in" : "ep0-out"); | |
844 | rc = ep0_queue(fsg); | |
845 | } | |
846 | ||
847 | /* Device either stalls (rc < 0) or reports success */ | |
848 | return rc; | |
849 | } | |
850 | ||
851 | ||
852 | /*-------------------------------------------------------------------------*/ | |
853 | ||
854 | /* All the following routines run in process context */ | |
855 | ||
856 | ||
857 | /* Use this for bulk or interrupt transfers, not ep0 */ | |
858 | static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, | |
859 | struct usb_request *req, int *pbusy, | |
860 | enum fsg_buffer_state *state) | |
861 | { | |
862 | int rc; | |
863 | ||
864 | if (ep == fsg->bulk_in) | |
865 | dump_msg(fsg, "bulk-in", req->buf, req->length); | |
d5e2b67a MN |
866 | |
867 | spin_lock_irq(&fsg->lock); | |
868 | *pbusy = 1; | |
869 | *state = BUF_STATE_BUSY; | |
870 | spin_unlock_irq(&fsg->lock); | |
871 | rc = usb_ep_queue(ep, req, GFP_KERNEL); | |
872 | if (rc != 0) { | |
873 | *pbusy = 0; | |
874 | *state = BUF_STATE_EMPTY; | |
875 | ||
876 | /* We can't do much more than wait for a reset */ | |
877 | ||
878 | /* Note: currently the net2280 driver fails zero-length | |
879 | * submissions if DMA is enabled. */ | |
880 | if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && | |
881 | req->length == 0)) | |
882 | WARNING(fsg, "error in submission: %s --> %d\n", | |
883 | ep->name, rc); | |
884 | } | |
885 | } | |
886 | ||
887 | ||
888 | static int sleep_thread(struct fsg_dev *fsg) | |
889 | { | |
890 | int rc = 0; | |
891 | ||
892 | /* Wait until a signal arrives or we are woken up */ | |
893 | for (;;) { | |
894 | try_to_freeze(); | |
895 | set_current_state(TASK_INTERRUPTIBLE); | |
896 | if (signal_pending(current)) { | |
897 | rc = -EINTR; | |
898 | break; | |
899 | } | |
900 | if (fsg->thread_wakeup_needed) | |
901 | break; | |
902 | schedule(); | |
903 | } | |
904 | __set_current_state(TASK_RUNNING); | |
905 | fsg->thread_wakeup_needed = 0; | |
906 | return rc; | |
907 | } | |
908 | ||
909 | ||
910 | /*-------------------------------------------------------------------------*/ | |
911 | ||
912 | static int do_read(struct fsg_dev *fsg) | |
913 | { | |
a41ae418 | 914 | struct fsg_lun *curlun = fsg->common->curlun; |
d5e2b67a MN |
915 | u32 lba; |
916 | struct fsg_buffhd *bh; | |
917 | int rc; | |
918 | u32 amount_left; | |
919 | loff_t file_offset, file_offset_tmp; | |
920 | unsigned int amount; | |
921 | unsigned int partial_page; | |
922 | ssize_t nread; | |
923 | ||
924 | /* Get the starting Logical Block Address and check that it's | |
925 | * not too big */ | |
a41ae418 MN |
926 | if (fsg->common->cmnd[0] == SC_READ_6) |
927 | lba = get_unaligned_be24(&fsg->common->cmnd[1]); | |
d5e2b67a | 928 | else { |
a41ae418 | 929 | lba = get_unaligned_be32(&fsg->common->cmnd[2]); |
d5e2b67a MN |
930 | |
931 | /* We allow DPO (Disable Page Out = don't save data in the | |
932 | * cache) and FUA (Force Unit Access = don't read from the | |
933 | * cache), but we don't implement them. */ | |
a41ae418 | 934 | if ((fsg->common->cmnd[1] & ~0x18) != 0) { |
d5e2b67a MN |
935 | curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
936 | return -EINVAL; | |
937 | } | |
938 | } | |
939 | if (lba >= curlun->num_sectors) { | |
940 | curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; | |
941 | return -EINVAL; | |
942 | } | |
943 | file_offset = ((loff_t) lba) << 9; | |
944 | ||
945 | /* Carry out the file reads */ | |
946 | amount_left = fsg->data_size_from_cmnd; | |
947 | if (unlikely(amount_left == 0)) | |
948 | return -EIO; // No default reply | |
949 | ||
950 | for (;;) { | |
951 | ||
952 | /* Figure out how much we need to read: | |
953 | * Try to read the remaining amount. | |
954 | * But don't read more than the buffer size. | |
955 | * And don't try to read past the end of the file. | |
956 | * Finally, if we're not at a page boundary, don't read past | |
957 | * the next page. | |
958 | * If this means reading 0 then we were asked to read past | |
959 | * the end of file. */ | |
93bcf12e | 960 | amount = min(amount_left, FSG_BUFLEN); |
d5e2b67a MN |
961 | amount = min((loff_t) amount, |
962 | curlun->file_length - file_offset); | |
963 | partial_page = file_offset & (PAGE_CACHE_SIZE - 1); | |
964 | if (partial_page > 0) | |
965 | amount = min(amount, (unsigned int) PAGE_CACHE_SIZE - | |
966 | partial_page); | |
967 | ||
968 | /* Wait for the next buffer to become available */ | |
a41ae418 | 969 | bh = fsg->common->next_buffhd_to_fill; |
d5e2b67a MN |
970 | while (bh->state != BUF_STATE_EMPTY) { |
971 | rc = sleep_thread(fsg); | |
972 | if (rc) | |
973 | return rc; | |
974 | } | |
975 | ||
976 | /* If we were asked to read past the end of file, | |
977 | * end with an empty buffer. */ | |
978 | if (amount == 0) { | |
979 | curlun->sense_data = | |
980 | SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; | |
981 | curlun->sense_data_info = file_offset >> 9; | |
982 | curlun->info_valid = 1; | |
983 | bh->inreq->length = 0; | |
984 | bh->state = BUF_STATE_FULL; | |
985 | break; | |
986 | } | |
987 | ||
988 | /* Perform the read */ | |
989 | file_offset_tmp = file_offset; | |
990 | nread = vfs_read(curlun->filp, | |
991 | (char __user *) bh->buf, | |
992 | amount, &file_offset_tmp); | |
993 | VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, | |
994 | (unsigned long long) file_offset, | |
995 | (int) nread); | |
996 | if (signal_pending(current)) | |
997 | return -EINTR; | |
998 | ||
999 | if (nread < 0) { | |
1000 | LDBG(curlun, "error in file read: %d\n", | |
1001 | (int) nread); | |
1002 | nread = 0; | |
1003 | } else if (nread < amount) { | |
1004 | LDBG(curlun, "partial file read: %d/%u\n", | |
1005 | (int) nread, amount); | |
1006 | nread -= (nread & 511); // Round down to a block | |
1007 | } | |
1008 | file_offset += nread; | |
1009 | amount_left -= nread; | |
1010 | fsg->residue -= nread; | |
1011 | bh->inreq->length = nread; | |
1012 | bh->state = BUF_STATE_FULL; | |
1013 | ||
1014 | /* If an error occurred, report it and its position */ | |
1015 | if (nread < amount) { | |
1016 | curlun->sense_data = SS_UNRECOVERED_READ_ERROR; | |
1017 | curlun->sense_data_info = file_offset >> 9; | |
1018 | curlun->info_valid = 1; | |
1019 | break; | |
1020 | } | |
1021 | ||
1022 | if (amount_left == 0) | |
1023 | break; // No more left to read | |
1024 | ||
1025 | /* Send this buffer and go read some more */ | |
1026 | bh->inreq->zero = 0; | |
1027 | start_transfer(fsg, fsg->bulk_in, bh->inreq, | |
1028 | &bh->inreq_busy, &bh->state); | |
a41ae418 | 1029 | fsg->common->next_buffhd_to_fill = bh->next; |
d5e2b67a MN |
1030 | } |
1031 | ||
1032 | return -EIO; // No default reply | |
1033 | } | |
1034 | ||
1035 | ||
1036 | /*-------------------------------------------------------------------------*/ | |
1037 | ||
1038 | static int do_write(struct fsg_dev *fsg) | |
1039 | { | |
a41ae418 | 1040 | struct fsg_lun *curlun = fsg->common->curlun; |
d5e2b67a MN |
1041 | u32 lba; |
1042 | struct fsg_buffhd *bh; | |
1043 | int get_some_more; | |
1044 | u32 amount_left_to_req, amount_left_to_write; | |
1045 | loff_t usb_offset, file_offset, file_offset_tmp; | |
1046 | unsigned int amount; | |
1047 | unsigned int partial_page; | |
1048 | ssize_t nwritten; | |
1049 | int rc; | |
1050 | ||
1051 | if (curlun->ro) { | |
1052 | curlun->sense_data = SS_WRITE_PROTECTED; | |
1053 | return -EINVAL; | |
1054 | } | |
1055 | spin_lock(&curlun->filp->f_lock); | |
1056 | curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait | |
1057 | spin_unlock(&curlun->filp->f_lock); | |
1058 | ||
1059 | /* Get the starting Logical Block Address and check that it's | |
1060 | * not too big */ | |
a41ae418 MN |
1061 | if (fsg->common->cmnd[0] == SC_WRITE_6) |
1062 | lba = get_unaligned_be24(&fsg->common->cmnd[1]); | |
d5e2b67a | 1063 | else { |
a41ae418 | 1064 | lba = get_unaligned_be32(&fsg->common->cmnd[2]); |
d5e2b67a MN |
1065 | |
1066 | /* We allow DPO (Disable Page Out = don't save data in the | |
1067 | * cache) and FUA (Force Unit Access = write directly to the | |
1068 | * medium). We don't implement DPO; we implement FUA by | |
1069 | * performing synchronous output. */ | |
a41ae418 | 1070 | if ((fsg->common->cmnd[1] & ~0x18) != 0) { |
d5e2b67a MN |
1071 | curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
1072 | return -EINVAL; | |
1073 | } | |
a41ae418 | 1074 | if (fsg->common->cmnd[1] & 0x08) { // FUA |
d5e2b67a MN |
1075 | spin_lock(&curlun->filp->f_lock); |
1076 | curlun->filp->f_flags |= O_SYNC; | |
1077 | spin_unlock(&curlun->filp->f_lock); | |
1078 | } | |
1079 | } | |
1080 | if (lba >= curlun->num_sectors) { | |
1081 | curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; | |
1082 | return -EINVAL; | |
1083 | } | |
1084 | ||
1085 | /* Carry out the file writes */ | |
1086 | get_some_more = 1; | |
1087 | file_offset = usb_offset = ((loff_t) lba) << 9; | |
1088 | amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; | |
1089 | ||
1090 | while (amount_left_to_write > 0) { | |
1091 | ||
1092 | /* Queue a request for more data from the host */ | |
a41ae418 | 1093 | bh = fsg->common->next_buffhd_to_fill; |
d5e2b67a MN |
1094 | if (bh->state == BUF_STATE_EMPTY && get_some_more) { |
1095 | ||
1096 | /* Figure out how much we want to get: | |
1097 | * Try to get the remaining amount. | |
1098 | * But don't get more than the buffer size. | |
1099 | * And don't try to go past the end of the file. | |
1100 | * If we're not at a page boundary, | |
1101 | * don't go past the next page. | |
1102 | * If this means getting 0, then we were asked | |
1103 | * to write past the end of file. | |
1104 | * Finally, round down to a block boundary. */ | |
93bcf12e | 1105 | amount = min(amount_left_to_req, FSG_BUFLEN); |
d5e2b67a MN |
1106 | amount = min((loff_t) amount, curlun->file_length - |
1107 | usb_offset); | |
1108 | partial_page = usb_offset & (PAGE_CACHE_SIZE - 1); | |
1109 | if (partial_page > 0) | |
1110 | amount = min(amount, | |
1111 | (unsigned int) PAGE_CACHE_SIZE - partial_page); | |
1112 | ||
1113 | if (amount == 0) { | |
1114 | get_some_more = 0; | |
1115 | curlun->sense_data = | |
1116 | SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; | |
1117 | curlun->sense_data_info = usb_offset >> 9; | |
1118 | curlun->info_valid = 1; | |
1119 | continue; | |
1120 | } | |
1121 | amount -= (amount & 511); | |
1122 | if (amount == 0) { | |
1123 | ||
1124 | /* Why were we were asked to transfer a | |
1125 | * partial block? */ | |
1126 | get_some_more = 0; | |
1127 | continue; | |
1128 | } | |
1129 | ||
1130 | /* Get the next buffer */ | |
1131 | usb_offset += amount; | |
1132 | fsg->usb_amount_left -= amount; | |
1133 | amount_left_to_req -= amount; | |
1134 | if (amount_left_to_req == 0) | |
1135 | get_some_more = 0; | |
1136 | ||
1137 | /* amount is always divisible by 512, hence by | |
1138 | * the bulk-out maxpacket size */ | |
1139 | bh->outreq->length = bh->bulk_out_intended_length = | |
1140 | amount; | |
1141 | bh->outreq->short_not_ok = 1; | |
1142 | start_transfer(fsg, fsg->bulk_out, bh->outreq, | |
1143 | &bh->outreq_busy, &bh->state); | |
a41ae418 | 1144 | fsg->common->next_buffhd_to_fill = bh->next; |
d5e2b67a MN |
1145 | continue; |
1146 | } | |
1147 | ||
1148 | /* Write the received data to the backing file */ | |
a41ae418 | 1149 | bh = fsg->common->next_buffhd_to_drain; |
d5e2b67a MN |
1150 | if (bh->state == BUF_STATE_EMPTY && !get_some_more) |
1151 | break; // We stopped early | |
1152 | if (bh->state == BUF_STATE_FULL) { | |
1153 | smp_rmb(); | |
a41ae418 | 1154 | fsg->common->next_buffhd_to_drain = bh->next; |
d5e2b67a MN |
1155 | bh->state = BUF_STATE_EMPTY; |
1156 | ||
1157 | /* Did something go wrong with the transfer? */ | |
1158 | if (bh->outreq->status != 0) { | |
1159 | curlun->sense_data = SS_COMMUNICATION_FAILURE; | |
1160 | curlun->sense_data_info = file_offset >> 9; | |
1161 | curlun->info_valid = 1; | |
1162 | break; | |
1163 | } | |
1164 | ||
1165 | amount = bh->outreq->actual; | |
1166 | if (curlun->file_length - file_offset < amount) { | |
1167 | LERROR(curlun, | |
1168 | "write %u @ %llu beyond end %llu\n", | |
1169 | amount, (unsigned long long) file_offset, | |
1170 | (unsigned long long) curlun->file_length); | |
1171 | amount = curlun->file_length - file_offset; | |
1172 | } | |
1173 | ||
1174 | /* Perform the write */ | |
1175 | file_offset_tmp = file_offset; | |
1176 | nwritten = vfs_write(curlun->filp, | |
1177 | (char __user *) bh->buf, | |
1178 | amount, &file_offset_tmp); | |
1179 | VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, | |
1180 | (unsigned long long) file_offset, | |
1181 | (int) nwritten); | |
1182 | if (signal_pending(current)) | |
1183 | return -EINTR; // Interrupted! | |
1184 | ||
1185 | if (nwritten < 0) { | |
1186 | LDBG(curlun, "error in file write: %d\n", | |
1187 | (int) nwritten); | |
1188 | nwritten = 0; | |
1189 | } else if (nwritten < amount) { | |
1190 | LDBG(curlun, "partial file write: %d/%u\n", | |
1191 | (int) nwritten, amount); | |
1192 | nwritten -= (nwritten & 511); | |
1193 | // Round down to a block | |
1194 | } | |
1195 | file_offset += nwritten; | |
1196 | amount_left_to_write -= nwritten; | |
1197 | fsg->residue -= nwritten; | |
1198 | ||
1199 | /* If an error occurred, report it and its position */ | |
1200 | if (nwritten < amount) { | |
1201 | curlun->sense_data = SS_WRITE_ERROR; | |
1202 | curlun->sense_data_info = file_offset >> 9; | |
1203 | curlun->info_valid = 1; | |
1204 | break; | |
1205 | } | |
1206 | ||
1207 | /* Did the host decide to stop early? */ | |
1208 | if (bh->outreq->actual != bh->outreq->length) { | |
1209 | fsg->short_packet_received = 1; | |
1210 | break; | |
1211 | } | |
1212 | continue; | |
1213 | } | |
1214 | ||
1215 | /* Wait for something to happen */ | |
1216 | rc = sleep_thread(fsg); | |
1217 | if (rc) | |
1218 | return rc; | |
1219 | } | |
1220 | ||
1221 | return -EIO; // No default reply | |
1222 | } | |
1223 | ||
1224 | ||
1225 | /*-------------------------------------------------------------------------*/ | |
1226 | ||
1227 | static int do_synchronize_cache(struct fsg_dev *fsg) | |
1228 | { | |
a41ae418 | 1229 | struct fsg_lun *curlun = fsg->common->curlun; |
d5e2b67a MN |
1230 | int rc; |
1231 | ||
1232 | /* We ignore the requested LBA and write out all file's | |
1233 | * dirty data buffers. */ | |
1234 | rc = fsg_lun_fsync_sub(curlun); | |
1235 | if (rc) | |
1236 | curlun->sense_data = SS_WRITE_ERROR; | |
1237 | return 0; | |
1238 | } | |
1239 | ||
1240 | ||
1241 | /*-------------------------------------------------------------------------*/ | |
1242 | ||
1243 | static void invalidate_sub(struct fsg_lun *curlun) | |
1244 | { | |
1245 | struct file *filp = curlun->filp; | |
1246 | struct inode *inode = filp->f_path.dentry->d_inode; | |
1247 | unsigned long rc; | |
1248 | ||
1249 | rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); | |
1250 | VLDBG(curlun, "invalidate_inode_pages -> %ld\n", rc); | |
1251 | } | |
1252 | ||
1253 | static int do_verify(struct fsg_dev *fsg) | |
1254 | { | |
a41ae418 | 1255 | struct fsg_lun *curlun = fsg->common->curlun; |
d5e2b67a MN |
1256 | u32 lba; |
1257 | u32 verification_length; | |
a41ae418 | 1258 | struct fsg_buffhd *bh = fsg->common->next_buffhd_to_fill; |
d5e2b67a MN |
1259 | loff_t file_offset, file_offset_tmp; |
1260 | u32 amount_left; | |
1261 | unsigned int amount; | |
1262 | ssize_t nread; | |
1263 | ||
1264 | /* Get the starting Logical Block Address and check that it's | |
1265 | * not too big */ | |
a41ae418 | 1266 | lba = get_unaligned_be32(&fsg->common->cmnd[2]); |
d5e2b67a MN |
1267 | if (lba >= curlun->num_sectors) { |
1268 | curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; | |
1269 | return -EINVAL; | |
1270 | } | |
1271 | ||
1272 | /* We allow DPO (Disable Page Out = don't save data in the | |
1273 | * cache) but we don't implement it. */ | |
a41ae418 | 1274 | if ((fsg->common->cmnd[1] & ~0x10) != 0) { |
d5e2b67a MN |
1275 | curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
1276 | return -EINVAL; | |
1277 | } | |
1278 | ||
a41ae418 | 1279 | verification_length = get_unaligned_be16(&fsg->common->cmnd[7]); |
d5e2b67a MN |
1280 | if (unlikely(verification_length == 0)) |
1281 | return -EIO; // No default reply | |
1282 | ||
1283 | /* Prepare to carry out the file verify */ | |
1284 | amount_left = verification_length << 9; | |
1285 | file_offset = ((loff_t) lba) << 9; | |
1286 | ||
1287 | /* Write out all the dirty buffers before invalidating them */ | |
1288 | fsg_lun_fsync_sub(curlun); | |
1289 | if (signal_pending(current)) | |
1290 | return -EINTR; | |
1291 | ||
1292 | invalidate_sub(curlun); | |
1293 | if (signal_pending(current)) | |
1294 | return -EINTR; | |
1295 | ||
1296 | /* Just try to read the requested blocks */ | |
1297 | while (amount_left > 0) { | |
1298 | ||
1299 | /* Figure out how much we need to read: | |
1300 | * Try to read the remaining amount, but not more than | |
1301 | * the buffer size. | |
1302 | * And don't try to read past the end of the file. | |
1303 | * If this means reading 0 then we were asked to read | |
1304 | * past the end of file. */ | |
93bcf12e | 1305 | amount = min(amount_left, FSG_BUFLEN); |
d5e2b67a MN |
1306 | amount = min((loff_t) amount, |
1307 | curlun->file_length - file_offset); | |
1308 | if (amount == 0) { | |
1309 | curlun->sense_data = | |
1310 | SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; | |
1311 | curlun->sense_data_info = file_offset >> 9; | |
1312 | curlun->info_valid = 1; | |
1313 | break; | |
1314 | } | |
1315 | ||
1316 | /* Perform the read */ | |
1317 | file_offset_tmp = file_offset; | |
1318 | nread = vfs_read(curlun->filp, | |
1319 | (char __user *) bh->buf, | |
1320 | amount, &file_offset_tmp); | |
1321 | VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, | |
1322 | (unsigned long long) file_offset, | |
1323 | (int) nread); | |
1324 | if (signal_pending(current)) | |
1325 | return -EINTR; | |
1326 | ||
1327 | if (nread < 0) { | |
1328 | LDBG(curlun, "error in file verify: %d\n", | |
1329 | (int) nread); | |
1330 | nread = 0; | |
1331 | } else if (nread < amount) { | |
1332 | LDBG(curlun, "partial file verify: %d/%u\n", | |
1333 | (int) nread, amount); | |
1334 | nread -= (nread & 511); // Round down to a sector | |
1335 | } | |
1336 | if (nread == 0) { | |
1337 | curlun->sense_data = SS_UNRECOVERED_READ_ERROR; | |
1338 | curlun->sense_data_info = file_offset >> 9; | |
1339 | curlun->info_valid = 1; | |
1340 | break; | |
1341 | } | |
1342 | file_offset += nread; | |
1343 | amount_left -= nread; | |
1344 | } | |
1345 | return 0; | |
1346 | } | |
1347 | ||
1348 | ||
1349 | /*-------------------------------------------------------------------------*/ | |
1350 | ||
1351 | static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh) | |
1352 | { | |
1353 | u8 *buf = (u8 *) bh->buf; | |
1354 | ||
1355 | static char vendor_id[] = "Linux "; | |
1356 | static char product_disk_id[] = "File-Stor Gadget"; | |
1357 | static char product_cdrom_id[] = "File-CD Gadget "; | |
1358 | ||
a41ae418 | 1359 | if (!fsg->common->curlun) { // Unsupported LUNs are okay |
d5e2b67a MN |
1360 | fsg->bad_lun_okay = 1; |
1361 | memset(buf, 0, 36); | |
1362 | buf[0] = 0x7f; // Unsupported, no device-type | |
1363 | buf[4] = 31; // Additional length | |
1364 | return 36; | |
1365 | } | |
1366 | ||
1367 | memset(buf, 0, 8); | |
1368 | buf[0] = (mod_data.cdrom ? TYPE_CDROM : TYPE_DISK); | |
1369 | if (mod_data.removable) | |
1370 | buf[1] = 0x80; | |
1371 | buf[2] = 2; // ANSI SCSI level 2 | |
1372 | buf[3] = 2; // SCSI-2 INQUIRY data format | |
1373 | buf[4] = 31; // Additional length | |
1374 | // No special options | |
1375 | sprintf(buf + 8, "%-8s%-16s%04x", vendor_id, | |
1376 | (mod_data.cdrom ? product_cdrom_id : | |
1377 | product_disk_id), | |
1378 | mod_data.release); | |
1379 | return 36; | |
1380 | } | |
1381 | ||
1382 | ||
1383 | static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) | |
1384 | { | |
a41ae418 | 1385 | struct fsg_lun *curlun = fsg->common->curlun; |
d5e2b67a MN |
1386 | u8 *buf = (u8 *) bh->buf; |
1387 | u32 sd, sdinfo; | |
1388 | int valid; | |
1389 | ||
1390 | /* | |
1391 | * From the SCSI-2 spec., section 7.9 (Unit attention condition): | |
1392 | * | |
1393 | * If a REQUEST SENSE command is received from an initiator | |
1394 | * with a pending unit attention condition (before the target | |
1395 | * generates the contingent allegiance condition), then the | |
1396 | * target shall either: | |
1397 | * a) report any pending sense data and preserve the unit | |
1398 | * attention condition on the logical unit, or, | |
1399 | * b) report the unit attention condition, may discard any | |
1400 | * pending sense data, and clear the unit attention | |
1401 | * condition on the logical unit for that initiator. | |
1402 | * | |
1403 | * FSG normally uses option a); enable this code to use option b). | |
1404 | */ | |
1405 | #if 0 | |
1406 | if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { | |
1407 | curlun->sense_data = curlun->unit_attention_data; | |
1408 | curlun->unit_attention_data = SS_NO_SENSE; | |
1409 | } | |
1410 | #endif | |
1411 | ||
1412 | if (!curlun) { // Unsupported LUNs are okay | |
1413 | fsg->bad_lun_okay = 1; | |
1414 | sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; | |
1415 | sdinfo = 0; | |
1416 | valid = 0; | |
1417 | } else { | |
1418 | sd = curlun->sense_data; | |
1419 | sdinfo = curlun->sense_data_info; | |
1420 | valid = curlun->info_valid << 7; | |
1421 | curlun->sense_data = SS_NO_SENSE; | |
1422 | curlun->sense_data_info = 0; | |
1423 | curlun->info_valid = 0; | |
1424 | } | |
1425 | ||
1426 | memset(buf, 0, 18); | |
1427 | buf[0] = valid | 0x70; // Valid, current error | |
1428 | buf[2] = SK(sd); | |
1429 | put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ | |
1430 | buf[7] = 18 - 8; // Additional sense length | |
1431 | buf[12] = ASC(sd); | |
1432 | buf[13] = ASCQ(sd); | |
1433 | return 18; | |
1434 | } | |
1435 | ||
1436 | ||
1437 | static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) | |
1438 | { | |
a41ae418 MN |
1439 | struct fsg_lun *curlun = fsg->common->curlun; |
1440 | u32 lba = get_unaligned_be32(&fsg->common->cmnd[2]); | |
1441 | int pmi = fsg->common->cmnd[8]; | |
d5e2b67a MN |
1442 | u8 *buf = (u8 *) bh->buf; |
1443 | ||
1444 | /* Check the PMI and LBA fields */ | |
1445 | if (pmi > 1 || (pmi == 0 && lba != 0)) { | |
1446 | curlun->sense_data = SS_INVALID_FIELD_IN_CDB; | |
1447 | return -EINVAL; | |
1448 | } | |
1449 | ||
1450 | put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); | |
1451 | /* Max logical block */ | |
1452 | put_unaligned_be32(512, &buf[4]); /* Block length */ | |
1453 | return 8; | |
1454 | } | |
1455 | ||
1456 | ||
1457 | static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh) | |
1458 | { | |
a41ae418 MN |
1459 | struct fsg_lun *curlun = fsg->common->curlun; |
1460 | int msf = fsg->common->cmnd[1] & 0x02; | |
1461 | u32 lba = get_unaligned_be32(&fsg->common->cmnd[2]); | |
d5e2b67a MN |
1462 | u8 *buf = (u8 *) bh->buf; |
1463 | ||
a41ae418 | 1464 | if ((fsg->common->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */ |
d5e2b67a MN |
1465 | curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
1466 | return -EINVAL; | |
1467 | } | |
1468 | if (lba >= curlun->num_sectors) { | |
1469 | curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; | |
1470 | return -EINVAL; | |
1471 | } | |
1472 | ||
1473 | memset(buf, 0, 8); | |
1474 | buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ | |
1475 | store_cdrom_address(&buf[4], msf, lba); | |
1476 | return 8; | |
1477 | } | |
1478 | ||
1479 | ||
1480 | static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh) | |
1481 | { | |
a41ae418 MN |
1482 | struct fsg_lun *curlun = fsg->common->curlun; |
1483 | int msf = fsg->common->cmnd[1] & 0x02; | |
1484 | int start_track = fsg->common->cmnd[6]; | |
d5e2b67a MN |
1485 | u8 *buf = (u8 *) bh->buf; |
1486 | ||
a41ae418 | 1487 | if ((fsg->common->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ |
d5e2b67a MN |
1488 | start_track > 1) { |
1489 | curlun->sense_data = SS_INVALID_FIELD_IN_CDB; | |
1490 | return -EINVAL; | |
1491 | } | |
1492 | ||
1493 | memset(buf, 0, 20); | |
1494 | buf[1] = (20-2); /* TOC data length */ | |
1495 | buf[2] = 1; /* First track number */ | |
1496 | buf[3] = 1; /* Last track number */ | |
1497 | buf[5] = 0x16; /* Data track, copying allowed */ | |
1498 | buf[6] = 0x01; /* Only track is number 1 */ | |
1499 | store_cdrom_address(&buf[8], msf, 0); | |
1500 | ||
1501 | buf[13] = 0x16; /* Lead-out track is data */ | |
1502 | buf[14] = 0xAA; /* Lead-out track number */ | |
1503 | store_cdrom_address(&buf[16], msf, curlun->num_sectors); | |
1504 | return 20; | |
1505 | } | |
1506 | ||
1507 | ||
1508 | static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) | |
1509 | { | |
a41ae418 MN |
1510 | struct fsg_lun *curlun = fsg->common->curlun; |
1511 | int mscmnd = fsg->common->cmnd[0]; | |
d5e2b67a MN |
1512 | u8 *buf = (u8 *) bh->buf; |
1513 | u8 *buf0 = buf; | |
1514 | int pc, page_code; | |
1515 | int changeable_values, all_pages; | |
1516 | int valid_page = 0; | |
1517 | int len, limit; | |
1518 | ||
a41ae418 | 1519 | if ((fsg->common->cmnd[1] & ~0x08) != 0) { // Mask away DBD |
d5e2b67a MN |
1520 | curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
1521 | return -EINVAL; | |
1522 | } | |
a41ae418 MN |
1523 | pc = fsg->common->cmnd[2] >> 6; |
1524 | page_code = fsg->common->cmnd[2] & 0x3f; | |
d5e2b67a MN |
1525 | if (pc == 3) { |
1526 | curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; | |
1527 | return -EINVAL; | |
1528 | } | |
1529 | changeable_values = (pc == 1); | |
1530 | all_pages = (page_code == 0x3f); | |
1531 | ||
1532 | /* Write the mode parameter header. Fixed values are: default | |
1533 | * medium type, no cache control (DPOFUA), and no block descriptors. | |
1534 | * The only variable value is the WriteProtect bit. We will fill in | |
1535 | * the mode data length later. */ | |
1536 | memset(buf, 0, 8); | |
1537 | if (mscmnd == SC_MODE_SENSE_6) { | |
1538 | buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA | |
1539 | buf += 4; | |
1540 | limit = 255; | |
1541 | } else { // SC_MODE_SENSE_10 | |
1542 | buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA | |
1543 | buf += 8; | |
93bcf12e | 1544 | limit = 65535; // Should really be FSG_BUFLEN |
d5e2b67a MN |
1545 | } |
1546 | ||
1547 | /* No block descriptors */ | |
1548 | ||
1549 | /* The mode pages, in numerical order. The only page we support | |
1550 | * is the Caching page. */ | |
1551 | if (page_code == 0x08 || all_pages) { | |
1552 | valid_page = 1; | |
1553 | buf[0] = 0x08; // Page code | |
1554 | buf[1] = 10; // Page length | |
1555 | memset(buf+2, 0, 10); // None of the fields are changeable | |
1556 | ||
1557 | if (!changeable_values) { | |
1558 | buf[2] = 0x04; // Write cache enable, | |
1559 | // Read cache not disabled | |
1560 | // No cache retention priorities | |
1561 | put_unaligned_be16(0xffff, &buf[4]); | |
1562 | /* Don't disable prefetch */ | |
1563 | /* Minimum prefetch = 0 */ | |
1564 | put_unaligned_be16(0xffff, &buf[8]); | |
1565 | /* Maximum prefetch */ | |
1566 | put_unaligned_be16(0xffff, &buf[10]); | |
1567 | /* Maximum prefetch ceiling */ | |
1568 | } | |
1569 | buf += 12; | |
1570 | } | |
1571 | ||
1572 | /* Check that a valid page was requested and the mode data length | |
1573 | * isn't too long. */ | |
1574 | len = buf - buf0; | |
1575 | if (!valid_page || len > limit) { | |
1576 | curlun->sense_data = SS_INVALID_FIELD_IN_CDB; | |
1577 | return -EINVAL; | |
1578 | } | |
1579 | ||
1580 | /* Store the mode data length */ | |
1581 | if (mscmnd == SC_MODE_SENSE_6) | |
1582 | buf0[0] = len - 1; | |
1583 | else | |
1584 | put_unaligned_be16(len - 2, buf0); | |
1585 | return len; | |
1586 | } | |
1587 | ||
1588 | ||
1589 | static int do_start_stop(struct fsg_dev *fsg) | |
1590 | { | |
d5e2b67a | 1591 | if (!mod_data.removable) { |
a41ae418 | 1592 | fsg->common->curlun->sense_data = SS_INVALID_COMMAND; |
d5e2b67a MN |
1593 | return -EINVAL; |
1594 | } | |
d5e2b67a MN |
1595 | return 0; |
1596 | } | |
1597 | ||
1598 | ||
1599 | static int do_prevent_allow(struct fsg_dev *fsg) | |
1600 | { | |
a41ae418 | 1601 | struct fsg_lun *curlun = fsg->common->curlun; |
d5e2b67a MN |
1602 | int prevent; |
1603 | ||
1604 | if (!mod_data.removable) { | |
1605 | curlun->sense_data = SS_INVALID_COMMAND; | |
1606 | return -EINVAL; | |
1607 | } | |
1608 | ||
a41ae418 MN |
1609 | prevent = fsg->common->cmnd[4] & 0x01; |
1610 | if ((fsg->common->cmnd[4] & ~0x01) != 0) { // Mask away Prevent | |
d5e2b67a MN |
1611 | curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
1612 | return -EINVAL; | |
1613 | } | |
1614 | ||
1615 | if (curlun->prevent_medium_removal && !prevent) | |
1616 | fsg_lun_fsync_sub(curlun); | |
1617 | curlun->prevent_medium_removal = prevent; | |
1618 | return 0; | |
1619 | } | |
1620 | ||
1621 | ||
1622 | static int do_read_format_capacities(struct fsg_dev *fsg, | |
1623 | struct fsg_buffhd *bh) | |
1624 | { | |
a41ae418 | 1625 | struct fsg_lun *curlun = fsg->common->curlun; |
d5e2b67a MN |
1626 | u8 *buf = (u8 *) bh->buf; |
1627 | ||
1628 | buf[0] = buf[1] = buf[2] = 0; | |
1629 | buf[3] = 8; // Only the Current/Maximum Capacity Descriptor | |
1630 | buf += 4; | |
1631 | ||
1632 | put_unaligned_be32(curlun->num_sectors, &buf[0]); | |
1633 | /* Number of blocks */ | |
1634 | put_unaligned_be32(512, &buf[4]); /* Block length */ | |
1635 | buf[4] = 0x02; /* Current capacity */ | |
1636 | return 12; | |
1637 | } | |
1638 | ||
1639 | ||
1640 | static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh) | |
1641 | { | |
a41ae418 | 1642 | struct fsg_lun *curlun = fsg->common->curlun; |
d5e2b67a MN |
1643 | |
1644 | /* We don't support MODE SELECT */ | |
1645 | curlun->sense_data = SS_INVALID_COMMAND; | |
1646 | return -EINVAL; | |
1647 | } | |
1648 | ||
1649 | ||
1650 | /*-------------------------------------------------------------------------*/ | |
1651 | ||
1652 | static int halt_bulk_in_endpoint(struct fsg_dev *fsg) | |
1653 | { | |
1654 | int rc; | |
1655 | ||
1656 | rc = fsg_set_halt(fsg, fsg->bulk_in); | |
1657 | if (rc == -EAGAIN) | |
1658 | VDBG(fsg, "delayed bulk-in endpoint halt\n"); | |
1659 | while (rc != 0) { | |
1660 | if (rc != -EAGAIN) { | |
1661 | WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); | |
1662 | rc = 0; | |
1663 | break; | |
1664 | } | |
1665 | ||
1666 | /* Wait for a short time and then try again */ | |
1667 | if (msleep_interruptible(100) != 0) | |
1668 | return -EINTR; | |
1669 | rc = usb_ep_set_halt(fsg->bulk_in); | |
1670 | } | |
1671 | return rc; | |
1672 | } | |
1673 | ||
1674 | static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) | |
1675 | { | |
1676 | int rc; | |
1677 | ||
1678 | DBG(fsg, "bulk-in set wedge\n"); | |
1679 | rc = usb_ep_set_wedge(fsg->bulk_in); | |
1680 | if (rc == -EAGAIN) | |
1681 | VDBG(fsg, "delayed bulk-in endpoint wedge\n"); | |
1682 | while (rc != 0) { | |
1683 | if (rc != -EAGAIN) { | |
1684 | WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); | |
1685 | rc = 0; | |
1686 | break; | |
1687 | } | |
1688 | ||
1689 | /* Wait for a short time and then try again */ | |
1690 | if (msleep_interruptible(100) != 0) | |
1691 | return -EINTR; | |
1692 | rc = usb_ep_set_wedge(fsg->bulk_in); | |
1693 | } | |
1694 | return rc; | |
1695 | } | |
1696 | ||
1697 | static int pad_with_zeros(struct fsg_dev *fsg) | |
1698 | { | |
a41ae418 | 1699 | struct fsg_buffhd *bh = fsg->common->next_buffhd_to_fill; |
d5e2b67a MN |
1700 | u32 nkeep = bh->inreq->length; |
1701 | u32 nsend; | |
1702 | int rc; | |
1703 | ||
1704 | bh->state = BUF_STATE_EMPTY; // For the first iteration | |
1705 | fsg->usb_amount_left = nkeep + fsg->residue; | |
1706 | while (fsg->usb_amount_left > 0) { | |
1707 | ||
1708 | /* Wait for the next buffer to be free */ | |
1709 | while (bh->state != BUF_STATE_EMPTY) { | |
1710 | rc = sleep_thread(fsg); | |
1711 | if (rc) | |
1712 | return rc; | |
1713 | } | |
1714 | ||
93bcf12e | 1715 | nsend = min(fsg->usb_amount_left, FSG_BUFLEN); |
d5e2b67a MN |
1716 | memset(bh->buf + nkeep, 0, nsend - nkeep); |
1717 | bh->inreq->length = nsend; | |
1718 | bh->inreq->zero = 0; | |
1719 | start_transfer(fsg, fsg->bulk_in, bh->inreq, | |
1720 | &bh->inreq_busy, &bh->state); | |
a41ae418 | 1721 | bh = fsg->common->next_buffhd_to_fill = bh->next; |
d5e2b67a MN |
1722 | fsg->usb_amount_left -= nsend; |
1723 | nkeep = 0; | |
1724 | } | |
1725 | return 0; | |
1726 | } | |
1727 | ||
1728 | static int throw_away_data(struct fsg_dev *fsg) | |
1729 | { | |
1730 | struct fsg_buffhd *bh; | |
1731 | u32 amount; | |
1732 | int rc; | |
1733 | ||
a41ae418 MN |
1734 | for (bh = fsg->common->next_buffhd_to_drain; |
1735 | bh->state != BUF_STATE_EMPTY || fsg->usb_amount_left > 0; | |
1736 | bh = fsg->common->next_buffhd_to_drain) { | |
d5e2b67a MN |
1737 | |
1738 | /* Throw away the data in a filled buffer */ | |
1739 | if (bh->state == BUF_STATE_FULL) { | |
1740 | smp_rmb(); | |
1741 | bh->state = BUF_STATE_EMPTY; | |
a41ae418 | 1742 | fsg->common->next_buffhd_to_drain = bh->next; |
d5e2b67a MN |
1743 | |
1744 | /* A short packet or an error ends everything */ | |
1745 | if (bh->outreq->actual != bh->outreq->length || | |
1746 | bh->outreq->status != 0) { | |
1747 | raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); | |
1748 | return -EINTR; | |
1749 | } | |
1750 | continue; | |
1751 | } | |
1752 | ||
1753 | /* Try to submit another request if we need one */ | |
a41ae418 | 1754 | bh = fsg->common->next_buffhd_to_fill; |
d5e2b67a | 1755 | if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) { |
93bcf12e | 1756 | amount = min(fsg->usb_amount_left, FSG_BUFLEN); |
d5e2b67a MN |
1757 | |
1758 | /* amount is always divisible by 512, hence by | |
1759 | * the bulk-out maxpacket size */ | |
1760 | bh->outreq->length = bh->bulk_out_intended_length = | |
1761 | amount; | |
1762 | bh->outreq->short_not_ok = 1; | |
1763 | start_transfer(fsg, fsg->bulk_out, bh->outreq, | |
1764 | &bh->outreq_busy, &bh->state); | |
a41ae418 | 1765 | fsg->common->next_buffhd_to_fill = bh->next; |
d5e2b67a MN |
1766 | fsg->usb_amount_left -= amount; |
1767 | continue; | |
1768 | } | |
1769 | ||
1770 | /* Otherwise wait for something to happen */ | |
1771 | rc = sleep_thread(fsg); | |
1772 | if (rc) | |
1773 | return rc; | |
1774 | } | |
1775 | return 0; | |
1776 | } | |
1777 | ||
1778 | ||
1779 | static int finish_reply(struct fsg_dev *fsg) | |
1780 | { | |
a41ae418 | 1781 | struct fsg_buffhd *bh = fsg->common->next_buffhd_to_fill; |
d5e2b67a MN |
1782 | int rc = 0; |
1783 | ||
1784 | switch (fsg->data_dir) { | |
1785 | case DATA_DIR_NONE: | |
1786 | break; // Nothing to send | |
1787 | ||
1788 | /* If we don't know whether the host wants to read or write, | |
1789 | * this must be CB or CBI with an unknown command. We mustn't | |
1790 | * try to send or receive any data. So stall both bulk pipes | |
1791 | * if we can and wait for a reset. */ | |
1792 | case DATA_DIR_UNKNOWN: | |
1793 | if (mod_data.can_stall) { | |
1794 | fsg_set_halt(fsg, fsg->bulk_out); | |
1795 | rc = halt_bulk_in_endpoint(fsg); | |
1796 | } | |
1797 | break; | |
1798 | ||
1799 | /* All but the last buffer of data must have already been sent */ | |
1800 | case DATA_DIR_TO_HOST: | |
93bcf12e MN |
1801 | if (fsg->data_size == 0) { |
1802 | /* Nothing to send */ | |
d5e2b67a MN |
1803 | |
1804 | /* If there's no residue, simply send the last buffer */ | |
93bcf12e | 1805 | } else if (fsg->residue == 0) { |
d5e2b67a MN |
1806 | bh->inreq->zero = 0; |
1807 | start_transfer(fsg, fsg->bulk_in, bh->inreq, | |
1808 | &bh->inreq_busy, &bh->state); | |
a41ae418 | 1809 | fsg->common->next_buffhd_to_fill = bh->next; |
d5e2b67a MN |
1810 | |
1811 | /* For Bulk-only, if we're allowed to stall then send the | |
1812 | * short packet and halt the bulk-in endpoint. If we can't | |
1813 | * stall, pad out the remaining data with 0's. */ | |
93bcf12e MN |
1814 | } else if (mod_data.can_stall) { |
1815 | bh->inreq->zero = 1; | |
1816 | start_transfer(fsg, fsg->bulk_in, bh->inreq, | |
1817 | &bh->inreq_busy, &bh->state); | |
a41ae418 | 1818 | fsg->common->next_buffhd_to_fill = bh->next; |
93bcf12e MN |
1819 | rc = halt_bulk_in_endpoint(fsg); |
1820 | } else { | |
1821 | rc = pad_with_zeros(fsg); | |
d5e2b67a MN |
1822 | } |
1823 | break; | |
1824 | ||
1825 | /* We have processed all we want from the data the host has sent. | |
1826 | * There may still be outstanding bulk-out requests. */ | |
1827 | case DATA_DIR_FROM_HOST: | |
1828 | if (fsg->residue == 0) | |
1829 | ; // Nothing to receive | |
1830 | ||
1831 | /* Did the host stop sending unexpectedly early? */ | |
1832 | else if (fsg->short_packet_received) { | |
1833 | raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); | |
1834 | rc = -EINTR; | |
1835 | } | |
1836 | ||
1837 | /* We haven't processed all the incoming data. Even though | |
1838 | * we may be allowed to stall, doing so would cause a race. | |
1839 | * The controller may already have ACK'ed all the remaining | |
1840 | * bulk-out packets, in which case the host wouldn't see a | |
1841 | * STALL. Not realizing the endpoint was halted, it wouldn't | |
1842 | * clear the halt -- leading to problems later on. */ | |
1843 | #if 0 | |
1844 | else if (mod_data.can_stall) { | |
1845 | fsg_set_halt(fsg, fsg->bulk_out); | |
1846 | raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); | |
1847 | rc = -EINTR; | |
1848 | } | |
1849 | #endif | |
1850 | ||
1851 | /* We can't stall. Read in the excess data and throw it | |
1852 | * all away. */ | |
1853 | else | |
1854 | rc = throw_away_data(fsg); | |
1855 | break; | |
1856 | } | |
1857 | return rc; | |
1858 | } | |
1859 | ||
1860 | ||
1861 | static int send_status(struct fsg_dev *fsg) | |
1862 | { | |
a41ae418 | 1863 | struct fsg_lun *curlun = fsg->common->curlun; |
d5e2b67a | 1864 | struct fsg_buffhd *bh; |
93bcf12e | 1865 | struct bulk_cs_wrap *csw; |
d5e2b67a MN |
1866 | int rc; |
1867 | u8 status = USB_STATUS_PASS; | |
1868 | u32 sd, sdinfo = 0; | |
1869 | ||
1870 | /* Wait for the next buffer to become available */ | |
a41ae418 | 1871 | bh = fsg->common->next_buffhd_to_fill; |
d5e2b67a MN |
1872 | while (bh->state != BUF_STATE_EMPTY) { |
1873 | rc = sleep_thread(fsg); | |
1874 | if (rc) | |
1875 | return rc; | |
1876 | } | |
1877 | ||
1878 | if (curlun) { | |
1879 | sd = curlun->sense_data; | |
1880 | sdinfo = curlun->sense_data_info; | |
1881 | } else if (fsg->bad_lun_okay) | |
1882 | sd = SS_NO_SENSE; | |
1883 | else | |
1884 | sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; | |
1885 | ||
1886 | if (fsg->phase_error) { | |
1887 | DBG(fsg, "sending phase-error status\n"); | |
1888 | status = USB_STATUS_PHASE_ERROR; | |
1889 | sd = SS_INVALID_COMMAND; | |
1890 | } else if (sd != SS_NO_SENSE) { | |
1891 | DBG(fsg, "sending command-failure status\n"); | |
1892 | status = USB_STATUS_FAIL; | |
1893 | VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" | |
1894 | " info x%x\n", | |
1895 | SK(sd), ASC(sd), ASCQ(sd), sdinfo); | |
1896 | } | |
1897 | ||
93bcf12e | 1898 | /* Store and send the Bulk-only CSW */ |
606206c2 | 1899 | csw = (void*)bh->buf; |
d5e2b67a | 1900 | |
93bcf12e MN |
1901 | csw->Signature = cpu_to_le32(USB_BULK_CS_SIG); |
1902 | csw->Tag = fsg->tag; | |
1903 | csw->Residue = cpu_to_le32(fsg->residue); | |
1904 | csw->Status = status; | |
d5e2b67a | 1905 | |
93bcf12e MN |
1906 | bh->inreq->length = USB_BULK_CS_WRAP_LEN; |
1907 | bh->inreq->zero = 0; | |
1908 | start_transfer(fsg, fsg->bulk_in, bh->inreq, | |
1909 | &bh->inreq_busy, &bh->state); | |
d5e2b67a | 1910 | |
a41ae418 | 1911 | fsg->common->next_buffhd_to_fill = bh->next; |
d5e2b67a MN |
1912 | return 0; |
1913 | } | |
1914 | ||
1915 | ||
1916 | /*-------------------------------------------------------------------------*/ | |
1917 | ||
1918 | /* Check whether the command is properly formed and whether its data size | |
1919 | * and direction agree with the values we already have. */ | |
1920 | static int check_command(struct fsg_dev *fsg, int cmnd_size, | |
1921 | enum data_direction data_dir, unsigned int mask, | |
1922 | int needs_medium, const char *name) | |
1923 | { | |
1924 | int i; | |
a41ae418 | 1925 | int lun = fsg->common->cmnd[1] >> 5; |
d5e2b67a MN |
1926 | static const char dirletter[4] = {'u', 'o', 'i', 'n'}; |
1927 | char hdlen[20]; | |
1928 | struct fsg_lun *curlun; | |
1929 | ||
d5e2b67a MN |
1930 | hdlen[0] = 0; |
1931 | if (fsg->data_dir != DATA_DIR_UNKNOWN) | |
1932 | sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir], | |
1933 | fsg->data_size); | |
1934 | VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", | |
1935 | name, cmnd_size, dirletter[(int) data_dir], | |
a41ae418 | 1936 | fsg->data_size_from_cmnd, fsg->common->cmnd_size, hdlen); |
d5e2b67a MN |
1937 | |
1938 | /* We can't reply at all until we know the correct data direction | |
1939 | * and size. */ | |
1940 | if (fsg->data_size_from_cmnd == 0) | |
1941 | data_dir = DATA_DIR_NONE; | |
1942 | if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI | |
1943 | fsg->data_dir = data_dir; | |
1944 | fsg->data_size = fsg->data_size_from_cmnd; | |
1945 | ||
1946 | } else { // Bulk-only | |
1947 | if (fsg->data_size < fsg->data_size_from_cmnd) { | |
1948 | ||
1949 | /* Host data size < Device data size is a phase error. | |
1950 | * Carry out the command, but only transfer as much | |
1951 | * as we are allowed. */ | |
1952 | fsg->data_size_from_cmnd = fsg->data_size; | |
1953 | fsg->phase_error = 1; | |
1954 | } | |
1955 | } | |
1956 | fsg->residue = fsg->usb_amount_left = fsg->data_size; | |
1957 | ||
1958 | /* Conflicting data directions is a phase error */ | |
1959 | if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) { | |
1960 | fsg->phase_error = 1; | |
1961 | return -EINVAL; | |
1962 | } | |
1963 | ||
1964 | /* Verify the length of the command itself */ | |
a41ae418 | 1965 | if (cmnd_size != fsg->common->cmnd_size) { |
d5e2b67a MN |
1966 | |
1967 | /* Special case workaround: There are plenty of buggy SCSI | |
1968 | * implementations. Many have issues with cbw->Length | |
1969 | * field passing a wrong command size. For those cases we | |
1970 | * always try to work around the problem by using the length | |
1971 | * sent by the host side provided it is at least as large | |
1972 | * as the correct command length. | |
1973 | * Examples of such cases would be MS-Windows, which issues | |
1974 | * REQUEST SENSE with cbw->Length == 12 where it should | |
1975 | * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and | |
1976 | * REQUEST SENSE with cbw->Length == 10 where it should | |
1977 | * be 6 as well. | |
1978 | */ | |
a41ae418 | 1979 | if (cmnd_size <= fsg->common->cmnd_size) { |
d5e2b67a | 1980 | DBG(fsg, "%s is buggy! Expected length %d " |
a41ae418 MN |
1981 | "but we got %d\n", name, |
1982 | cmnd_size, fsg->common->cmnd_size); | |
1983 | cmnd_size = fsg->common->cmnd_size; | |
d5e2b67a MN |
1984 | } else { |
1985 | fsg->phase_error = 1; | |
1986 | return -EINVAL; | |
1987 | } | |
1988 | } | |
1989 | ||
1990 | /* Check that the LUN values are consistent */ | |
a41ae418 | 1991 | if (fsg->common->lun != lun) |
93bcf12e | 1992 | DBG(fsg, "using LUN %d from CBW, not LUN %d from CDB\n", |
a41ae418 | 1993 | fsg->common->lun, lun); |
d5e2b67a MN |
1994 | |
1995 | /* Check the LUN */ | |
a41ae418 MN |
1996 | if (fsg->common->lun >= 0 && fsg->common->lun < fsg->common->nluns) { |
1997 | fsg->common->curlun = curlun = &fsg->common->luns[fsg->common->lun]; | |
1998 | if (fsg->common->cmnd[0] != SC_REQUEST_SENSE) { | |
d5e2b67a MN |
1999 | curlun->sense_data = SS_NO_SENSE; |
2000 | curlun->sense_data_info = 0; | |
2001 | curlun->info_valid = 0; | |
2002 | } | |
2003 | } else { | |
a41ae418 | 2004 | fsg->common->curlun = curlun = NULL; |
d5e2b67a MN |
2005 | fsg->bad_lun_okay = 0; |
2006 | ||
2007 | /* INQUIRY and REQUEST SENSE commands are explicitly allowed | |
2008 | * to use unsupported LUNs; all others may not. */ | |
a41ae418 MN |
2009 | if (fsg->common->cmnd[0] != SC_INQUIRY && |
2010 | fsg->common->cmnd[0] != SC_REQUEST_SENSE) { | |
2011 | DBG(fsg, "unsupported LUN %d\n", fsg->common->lun); | |
d5e2b67a MN |
2012 | return -EINVAL; |
2013 | } | |
2014 | } | |
2015 | ||
2016 | /* If a unit attention condition exists, only INQUIRY and | |
2017 | * REQUEST SENSE commands are allowed; anything else must fail. */ | |
2018 | if (curlun && curlun->unit_attention_data != SS_NO_SENSE && | |
a41ae418 MN |
2019 | fsg->common->cmnd[0] != SC_INQUIRY && |
2020 | fsg->common->cmnd[0] != SC_REQUEST_SENSE) { | |
d5e2b67a MN |
2021 | curlun->sense_data = curlun->unit_attention_data; |
2022 | curlun->unit_attention_data = SS_NO_SENSE; | |
2023 | return -EINVAL; | |
2024 | } | |
2025 | ||
2026 | /* Check that only command bytes listed in the mask are non-zero */ | |
a41ae418 | 2027 | fsg->common->cmnd[1] &= 0x1f; // Mask away the LUN |
d5e2b67a | 2028 | for (i = 1; i < cmnd_size; ++i) { |
a41ae418 | 2029 | if (fsg->common->cmnd[i] && !(mask & (1 << i))) { |
d5e2b67a MN |
2030 | if (curlun) |
2031 | curlun->sense_data = SS_INVALID_FIELD_IN_CDB; | |
2032 | return -EINVAL; | |
2033 | } | |
2034 | } | |
2035 | ||
2036 | /* If the medium isn't mounted and the command needs to access | |
2037 | * it, return an error. */ | |
2038 | if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { | |
2039 | curlun->sense_data = SS_MEDIUM_NOT_PRESENT; | |
2040 | return -EINVAL; | |
2041 | } | |
2042 | ||
2043 | return 0; | |
2044 | } | |
2045 | ||
2046 | ||
2047 | static int do_scsi_command(struct fsg_dev *fsg) | |
2048 | { | |
2049 | struct fsg_buffhd *bh; | |
2050 | int rc; | |
2051 | int reply = -EINVAL; | |
2052 | int i; | |
2053 | static char unknown[16]; | |
2054 | ||
a41ae418 | 2055 | dump_cdb(fsg->common); |
d5e2b67a MN |
2056 | |
2057 | /* Wait for the next buffer to become available for data or status */ | |
a41ae418 | 2058 | bh = fsg->common->next_buffhd_to_drain = fsg->common->next_buffhd_to_fill; |
d5e2b67a MN |
2059 | while (bh->state != BUF_STATE_EMPTY) { |
2060 | rc = sleep_thread(fsg); | |
2061 | if (rc) | |
2062 | return rc; | |
2063 | } | |
2064 | fsg->phase_error = 0; | |
2065 | fsg->short_packet_received = 0; | |
2066 | ||
a41ae418 MN |
2067 | down_read(&fsg->common->filesem); // We're using the backing file |
2068 | switch (fsg->common->cmnd[0]) { | |
d5e2b67a MN |
2069 | |
2070 | case SC_INQUIRY: | |
a41ae418 | 2071 | fsg->data_size_from_cmnd = fsg->common->cmnd[4]; |
d5e2b67a MN |
2072 | if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, |
2073 | (1<<4), 0, | |
2074 | "INQUIRY")) == 0) | |
2075 | reply = do_inquiry(fsg, bh); | |
2076 | break; | |
2077 | ||
2078 | case SC_MODE_SELECT_6: | |
a41ae418 | 2079 | fsg->data_size_from_cmnd = fsg->common->cmnd[4]; |
d5e2b67a MN |
2080 | if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, |
2081 | (1<<1) | (1<<4), 0, | |
2082 | "MODE SELECT(6)")) == 0) | |
2083 | reply = do_mode_select(fsg, bh); | |
2084 | break; | |
2085 | ||
2086 | case SC_MODE_SELECT_10: | |
a41ae418 | 2087 | fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->common->cmnd[7]); |
d5e2b67a MN |
2088 | if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, |
2089 | (1<<1) | (3<<7), 0, | |
2090 | "MODE SELECT(10)")) == 0) | |
2091 | reply = do_mode_select(fsg, bh); | |
2092 | break; | |
2093 | ||
2094 | case SC_MODE_SENSE_6: | |
a41ae418 | 2095 | fsg->data_size_from_cmnd = fsg->common->cmnd[4]; |
d5e2b67a MN |
2096 | if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, |
2097 | (1<<1) | (1<<2) | (1<<4), 0, | |
2098 | "MODE SENSE(6)")) == 0) | |
2099 | reply = do_mode_sense(fsg, bh); | |
2100 | break; | |
2101 | ||
2102 | case SC_MODE_SENSE_10: | |
a41ae418 | 2103 | fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->common->cmnd[7]); |
d5e2b67a MN |
2104 | if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, |
2105 | (1<<1) | (1<<2) | (3<<7), 0, | |
2106 | "MODE SENSE(10)")) == 0) | |
2107 | reply = do_mode_sense(fsg, bh); | |
2108 | break; | |
2109 | ||
2110 | case SC_PREVENT_ALLOW_MEDIUM_REMOVAL: | |
2111 | fsg->data_size_from_cmnd = 0; | |
2112 | if ((reply = check_command(fsg, 6, DATA_DIR_NONE, | |
2113 | (1<<4), 0, | |
2114 | "PREVENT-ALLOW MEDIUM REMOVAL")) == 0) | |
2115 | reply = do_prevent_allow(fsg); | |
2116 | break; | |
2117 | ||
2118 | case SC_READ_6: | |
a41ae418 | 2119 | i = fsg->common->cmnd[4]; |
d5e2b67a MN |
2120 | fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; |
2121 | if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, | |
2122 | (7<<1) | (1<<4), 1, | |
2123 | "READ(6)")) == 0) | |
2124 | reply = do_read(fsg); | |
2125 | break; | |
2126 | ||
2127 | case SC_READ_10: | |
2128 | fsg->data_size_from_cmnd = | |
a41ae418 | 2129 | get_unaligned_be16(&fsg->common->cmnd[7]) << 9; |
d5e2b67a MN |
2130 | if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, |
2131 | (1<<1) | (0xf<<2) | (3<<7), 1, | |
2132 | "READ(10)")) == 0) | |
2133 | reply = do_read(fsg); | |
2134 | break; | |
2135 | ||
2136 | case SC_READ_12: | |
2137 | fsg->data_size_from_cmnd = | |
a41ae418 | 2138 | get_unaligned_be32(&fsg->common->cmnd[6]) << 9; |
d5e2b67a MN |
2139 | if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST, |
2140 | (1<<1) | (0xf<<2) | (0xf<<6), 1, | |
2141 | "READ(12)")) == 0) | |
2142 | reply = do_read(fsg); | |
2143 | break; | |
2144 | ||
2145 | case SC_READ_CAPACITY: | |
2146 | fsg->data_size_from_cmnd = 8; | |
2147 | if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, | |
2148 | (0xf<<2) | (1<<8), 1, | |
2149 | "READ CAPACITY")) == 0) | |
2150 | reply = do_read_capacity(fsg, bh); | |
2151 | break; | |
2152 | ||
2153 | case SC_READ_HEADER: | |
2154 | if (!mod_data.cdrom) | |
2155 | goto unknown_cmnd; | |
a41ae418 | 2156 | fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->common->cmnd[7]); |
d5e2b67a MN |
2157 | if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, |
2158 | (3<<7) | (0x1f<<1), 1, | |
2159 | "READ HEADER")) == 0) | |
2160 | reply = do_read_header(fsg, bh); | |
2161 | break; | |
2162 | ||
2163 | case SC_READ_TOC: | |
2164 | if (!mod_data.cdrom) | |
2165 | goto unknown_cmnd; | |
a41ae418 | 2166 | fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->common->cmnd[7]); |
d5e2b67a MN |
2167 | if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, |
2168 | (7<<6) | (1<<1), 1, | |
2169 | "READ TOC")) == 0) | |
2170 | reply = do_read_toc(fsg, bh); | |
2171 | break; | |
2172 | ||
2173 | case SC_READ_FORMAT_CAPACITIES: | |
a41ae418 | 2174 | fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->common->cmnd[7]); |
d5e2b67a MN |
2175 | if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, |
2176 | (3<<7), 1, | |
2177 | "READ FORMAT CAPACITIES")) == 0) | |
2178 | reply = do_read_format_capacities(fsg, bh); | |
2179 | break; | |
2180 | ||
2181 | case SC_REQUEST_SENSE: | |
a41ae418 | 2182 | fsg->data_size_from_cmnd = fsg->common->cmnd[4]; |
d5e2b67a MN |
2183 | if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, |
2184 | (1<<4), 0, | |
2185 | "REQUEST SENSE")) == 0) | |
2186 | reply = do_request_sense(fsg, bh); | |
2187 | break; | |
2188 | ||
2189 | case SC_START_STOP_UNIT: | |
2190 | fsg->data_size_from_cmnd = 0; | |
2191 | if ((reply = check_command(fsg, 6, DATA_DIR_NONE, | |
2192 | (1<<1) | (1<<4), 0, | |
2193 | "START-STOP UNIT")) == 0) | |
2194 | reply = do_start_stop(fsg); | |
2195 | break; | |
2196 | ||
2197 | case SC_SYNCHRONIZE_CACHE: | |
2198 | fsg->data_size_from_cmnd = 0; | |
2199 | if ((reply = check_command(fsg, 10, DATA_DIR_NONE, | |
2200 | (0xf<<2) | (3<<7), 1, | |
2201 | "SYNCHRONIZE CACHE")) == 0) | |
2202 | reply = do_synchronize_cache(fsg); | |
2203 | break; | |
2204 | ||
2205 | case SC_TEST_UNIT_READY: | |
2206 | fsg->data_size_from_cmnd = 0; | |
2207 | reply = check_command(fsg, 6, DATA_DIR_NONE, | |
2208 | 0, 1, | |
2209 | "TEST UNIT READY"); | |
2210 | break; | |
2211 | ||
2212 | /* Although optional, this command is used by MS-Windows. We | |
2213 | * support a minimal version: BytChk must be 0. */ | |
2214 | case SC_VERIFY: | |
2215 | fsg->data_size_from_cmnd = 0; | |
2216 | if ((reply = check_command(fsg, 10, DATA_DIR_NONE, | |
2217 | (1<<1) | (0xf<<2) | (3<<7), 1, | |
2218 | "VERIFY")) == 0) | |
2219 | reply = do_verify(fsg); | |
2220 | break; | |
2221 | ||
2222 | case SC_WRITE_6: | |
a41ae418 | 2223 | i = fsg->common->cmnd[4]; |
d5e2b67a MN |
2224 | fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; |
2225 | if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, | |
2226 | (7<<1) | (1<<4), 1, | |
2227 | "WRITE(6)")) == 0) | |
2228 | reply = do_write(fsg); | |
2229 | break; | |
2230 | ||
2231 | case SC_WRITE_10: | |
2232 | fsg->data_size_from_cmnd = | |
a41ae418 | 2233 | get_unaligned_be16(&fsg->common->cmnd[7]) << 9; |
d5e2b67a MN |
2234 | if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, |
2235 | (1<<1) | (0xf<<2) | (3<<7), 1, | |
2236 | "WRITE(10)")) == 0) | |
2237 | reply = do_write(fsg); | |
2238 | break; | |
2239 | ||
2240 | case SC_WRITE_12: | |
2241 | fsg->data_size_from_cmnd = | |
a41ae418 | 2242 | get_unaligned_be32(&fsg->common->cmnd[6]) << 9; |
d5e2b67a MN |
2243 | if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST, |
2244 | (1<<1) | (0xf<<2) | (0xf<<6), 1, | |
2245 | "WRITE(12)")) == 0) | |
2246 | reply = do_write(fsg); | |
2247 | break; | |
2248 | ||
2249 | /* Some mandatory commands that we recognize but don't implement. | |
2250 | * They don't mean much in this setting. It's left as an exercise | |
2251 | * for anyone interested to implement RESERVE and RELEASE in terms | |
2252 | * of Posix locks. */ | |
2253 | case SC_FORMAT_UNIT: | |
2254 | case SC_RELEASE: | |
2255 | case SC_RESERVE: | |
2256 | case SC_SEND_DIAGNOSTIC: | |
2257 | // Fall through | |
2258 | ||
2259 | default: | |
2260 | unknown_cmnd: | |
2261 | fsg->data_size_from_cmnd = 0; | |
a41ae418 MN |
2262 | sprintf(unknown, "Unknown x%02x", fsg->common->cmnd[0]); |
2263 | if ((reply = check_command(fsg, fsg->common->cmnd_size, | |
d5e2b67a | 2264 | DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) { |
a41ae418 | 2265 | fsg->common->curlun->sense_data = SS_INVALID_COMMAND; |
d5e2b67a MN |
2266 | reply = -EINVAL; |
2267 | } | |
2268 | break; | |
2269 | } | |
a41ae418 | 2270 | up_read(&fsg->common->filesem); |
d5e2b67a MN |
2271 | |
2272 | if (reply == -EINTR || signal_pending(current)) | |
2273 | return -EINTR; | |
2274 | ||
2275 | /* Set up the single reply buffer for finish_reply() */ | |
2276 | if (reply == -EINVAL) | |
2277 | reply = 0; // Error reply length | |
2278 | if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) { | |
2279 | reply = min((u32) reply, fsg->data_size_from_cmnd); | |
2280 | bh->inreq->length = reply; | |
2281 | bh->state = BUF_STATE_FULL; | |
2282 | fsg->residue -= reply; | |
2283 | } // Otherwise it's already set | |
2284 | ||
2285 | return 0; | |
2286 | } | |
2287 | ||
2288 | ||
2289 | /*-------------------------------------------------------------------------*/ | |
2290 | ||
2291 | static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) | |
2292 | { | |
2293 | struct usb_request *req = bh->outreq; | |
2294 | struct fsg_bulk_cb_wrap *cbw = req->buf; | |
2295 | ||
2296 | /* Was this a real packet? Should it be ignored? */ | |
2297 | if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) | |
2298 | return -EINVAL; | |
2299 | ||
2300 | /* Is the CBW valid? */ | |
2301 | if (req->actual != USB_BULK_CB_WRAP_LEN || | |
2302 | cbw->Signature != cpu_to_le32( | |
2303 | USB_BULK_CB_SIG)) { | |
2304 | DBG(fsg, "invalid CBW: len %u sig 0x%x\n", | |
2305 | req->actual, | |
2306 | le32_to_cpu(cbw->Signature)); | |
2307 | ||
2308 | /* The Bulk-only spec says we MUST stall the IN endpoint | |
2309 | * (6.6.1), so it's unavoidable. It also says we must | |
2310 | * retain this state until the next reset, but there's | |
2311 | * no way to tell the controller driver it should ignore | |
2312 | * Clear-Feature(HALT) requests. | |
2313 | * | |
2314 | * We aren't required to halt the OUT endpoint; instead | |
2315 | * we can simply accept and discard any data received | |
2316 | * until the next reset. */ | |
2317 | wedge_bulk_in_endpoint(fsg); | |
2318 | set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); | |
2319 | return -EINVAL; | |
2320 | } | |
2321 | ||
2322 | /* Is the CBW meaningful? */ | |
2323 | if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG || | |
2324 | cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { | |
2325 | DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " | |
2326 | "cmdlen %u\n", | |
2327 | cbw->Lun, cbw->Flags, cbw->Length); | |
2328 | ||
2329 | /* We can do anything we want here, so let's stall the | |
2330 | * bulk pipes if we are allowed to. */ | |
2331 | if (mod_data.can_stall) { | |
2332 | fsg_set_halt(fsg, fsg->bulk_out); | |
2333 | halt_bulk_in_endpoint(fsg); | |
2334 | } | |
2335 | return -EINVAL; | |
2336 | } | |
2337 | ||
2338 | /* Save the command for later */ | |
a41ae418 MN |
2339 | fsg->common->cmnd_size = cbw->Length; |
2340 | memcpy(fsg->common->cmnd, cbw->CDB, fsg->common->cmnd_size); | |
d5e2b67a MN |
2341 | if (cbw->Flags & USB_BULK_IN_FLAG) |
2342 | fsg->data_dir = DATA_DIR_TO_HOST; | |
2343 | else | |
2344 | fsg->data_dir = DATA_DIR_FROM_HOST; | |
2345 | fsg->data_size = le32_to_cpu(cbw->DataTransferLength); | |
2346 | if (fsg->data_size == 0) | |
2347 | fsg->data_dir = DATA_DIR_NONE; | |
a41ae418 | 2348 | fsg->common->lun = cbw->Lun; |
d5e2b67a MN |
2349 | fsg->tag = cbw->Tag; |
2350 | return 0; | |
2351 | } | |
2352 | ||
2353 | ||
2354 | static int get_next_command(struct fsg_dev *fsg) | |
2355 | { | |
2356 | struct fsg_buffhd *bh; | |
2357 | int rc = 0; | |
2358 | ||
93bcf12e | 2359 | /* Wait for the next buffer to become available */ |
a41ae418 | 2360 | bh = fsg->common->next_buffhd_to_fill; |
93bcf12e MN |
2361 | while (bh->state != BUF_STATE_EMPTY) { |
2362 | rc = sleep_thread(fsg); | |
2363 | if (rc) | |
2364 | return rc; | |
2365 | } | |
d5e2b67a | 2366 | |
93bcf12e MN |
2367 | /* Queue a request to read a Bulk-only CBW */ |
2368 | set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN); | |
2369 | bh->outreq->short_not_ok = 1; | |
2370 | start_transfer(fsg, fsg->bulk_out, bh->outreq, | |
2371 | &bh->outreq_busy, &bh->state); | |
d5e2b67a | 2372 | |
93bcf12e MN |
2373 | /* We will drain the buffer in software, which means we |
2374 | * can reuse it for the next filling. No need to advance | |
2375 | * next_buffhd_to_fill. */ | |
d5e2b67a | 2376 | |
93bcf12e MN |
2377 | /* Wait for the CBW to arrive */ |
2378 | while (bh->state != BUF_STATE_FULL) { | |
2379 | rc = sleep_thread(fsg); | |
2380 | if (rc) | |
2381 | return rc; | |
d5e2b67a | 2382 | } |
93bcf12e MN |
2383 | smp_rmb(); |
2384 | rc = received_cbw(fsg, bh); | |
2385 | bh->state = BUF_STATE_EMPTY; | |
2386 | ||
d5e2b67a MN |
2387 | return rc; |
2388 | } | |
2389 | ||
2390 | ||
2391 | /*-------------------------------------------------------------------------*/ | |
2392 | ||
2393 | static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep, | |
2394 | const struct usb_endpoint_descriptor *d) | |
2395 | { | |
2396 | int rc; | |
2397 | ||
2398 | ep->driver_data = fsg; | |
2399 | rc = usb_ep_enable(ep, d); | |
2400 | if (rc) | |
2401 | ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc); | |
2402 | return rc; | |
2403 | } | |
2404 | ||
2405 | static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep, | |
2406 | struct usb_request **preq) | |
2407 | { | |
2408 | *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); | |
2409 | if (*preq) | |
2410 | return 0; | |
2411 | ERROR(fsg, "can't allocate request for %s\n", ep->name); | |
2412 | return -ENOMEM; | |
2413 | } | |
2414 | ||
2415 | /* | |
2416 | * Reset interface setting and re-init endpoint state (toggle etc). | |
2417 | * Call with altsetting < 0 to disable the interface. The only other | |
2418 | * available altsetting is 0, which enables the interface. | |
2419 | */ | |
2420 | static int do_set_interface(struct fsg_dev *fsg, int altsetting) | |
2421 | { | |
2422 | int rc = 0; | |
2423 | int i; | |
2424 | const struct usb_endpoint_descriptor *d; | |
2425 | ||
2426 | if (fsg->running) | |
2427 | DBG(fsg, "reset interface\n"); | |
2428 | ||
2429 | reset: | |
2430 | /* Deallocate the requests */ | |
2431 | for (i = 0; i < FSG_NUM_BUFFERS; ++i) { | |
a41ae418 | 2432 | struct fsg_buffhd *bh = &fsg->common->buffhds[i]; |
d5e2b67a MN |
2433 | |
2434 | if (bh->inreq) { | |
2435 | usb_ep_free_request(fsg->bulk_in, bh->inreq); | |
2436 | bh->inreq = NULL; | |
2437 | } | |
2438 | if (bh->outreq) { | |
2439 | usb_ep_free_request(fsg->bulk_out, bh->outreq); | |
2440 | bh->outreq = NULL; | |
2441 | } | |
2442 | } | |
d5e2b67a MN |
2443 | |
2444 | /* Disable the endpoints */ | |
2445 | if (fsg->bulk_in_enabled) { | |
2446 | usb_ep_disable(fsg->bulk_in); | |
2447 | fsg->bulk_in_enabled = 0; | |
2448 | } | |
2449 | if (fsg->bulk_out_enabled) { | |
2450 | usb_ep_disable(fsg->bulk_out); | |
2451 | fsg->bulk_out_enabled = 0; | |
2452 | } | |
d5e2b67a MN |
2453 | |
2454 | fsg->running = 0; | |
2455 | if (altsetting < 0 || rc != 0) | |
2456 | return rc; | |
2457 | ||
2458 | DBG(fsg, "set interface %d\n", altsetting); | |
2459 | ||
2460 | /* Enable the endpoints */ | |
2461 | d = fsg_ep_desc(fsg->gadget, | |
2462 | &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc); | |
2463 | if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) | |
2464 | goto reset; | |
2465 | fsg->bulk_in_enabled = 1; | |
2466 | ||
2467 | d = fsg_ep_desc(fsg->gadget, | |
2468 | &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc); | |
2469 | if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) | |
2470 | goto reset; | |
2471 | fsg->bulk_out_enabled = 1; | |
2472 | fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); | |
2473 | clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); | |
2474 | ||
d5e2b67a MN |
2475 | /* Allocate the requests */ |
2476 | for (i = 0; i < FSG_NUM_BUFFERS; ++i) { | |
a41ae418 | 2477 | struct fsg_buffhd *bh = &fsg->common->buffhds[i]; |
d5e2b67a MN |
2478 | |
2479 | if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) | |
2480 | goto reset; | |
2481 | if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) | |
2482 | goto reset; | |
2483 | bh->inreq->buf = bh->outreq->buf = bh->buf; | |
2484 | bh->inreq->context = bh->outreq->context = bh; | |
2485 | bh->inreq->complete = bulk_in_complete; | |
2486 | bh->outreq->complete = bulk_out_complete; | |
2487 | } | |
d5e2b67a MN |
2488 | |
2489 | fsg->running = 1; | |
a41ae418 MN |
2490 | for (i = 0; i < fsg->common->nluns; ++i) |
2491 | fsg->common->luns[i].unit_attention_data = SS_RESET_OCCURRED; | |
d5e2b67a MN |
2492 | return rc; |
2493 | } | |
2494 | ||
2495 | ||
2496 | /* | |
2497 | * Change our operational configuration. This code must agree with the code | |
2498 | * that returns config descriptors, and with interface altsetting code. | |
2499 | * | |
2500 | * It's also responsible for power management interactions. Some | |
2501 | * configurations might not work with our current power sources. | |
2502 | * For now we just assume the gadget is always self-powered. | |
2503 | */ | |
2504 | static int do_set_config(struct fsg_dev *fsg, u8 new_config) | |
2505 | { | |
2506 | int rc = 0; | |
2507 | ||
2508 | /* Disable the single interface */ | |
2509 | if (fsg->config != 0) { | |
2510 | DBG(fsg, "reset config\n"); | |
2511 | fsg->config = 0; | |
2512 | rc = do_set_interface(fsg, -1); | |
2513 | } | |
2514 | ||
2515 | /* Enable the interface */ | |
2516 | if (new_config != 0) { | |
2517 | fsg->config = new_config; | |
2518 | if ((rc = do_set_interface(fsg, 0)) != 0) | |
2519 | fsg->config = 0; // Reset on errors | |
2520 | else { | |
2521 | char *speed; | |
2522 | ||
2523 | switch (fsg->gadget->speed) { | |
2524 | case USB_SPEED_LOW: speed = "low"; break; | |
2525 | case USB_SPEED_FULL: speed = "full"; break; | |
2526 | case USB_SPEED_HIGH: speed = "high"; break; | |
2527 | default: speed = "?"; break; | |
2528 | } | |
2529 | INFO(fsg, "%s speed config #%d\n", speed, fsg->config); | |
2530 | } | |
2531 | } | |
2532 | return rc; | |
2533 | } | |
2534 | ||
2535 | ||
2536 | /*-------------------------------------------------------------------------*/ | |
2537 | ||
2538 | static void handle_exception(struct fsg_dev *fsg) | |
2539 | { | |
2540 | siginfo_t info; | |
2541 | int sig; | |
2542 | int i; | |
d5e2b67a MN |
2543 | struct fsg_buffhd *bh; |
2544 | enum fsg_state old_state; | |
2545 | u8 new_config; | |
2546 | struct fsg_lun *curlun; | |
2547 | unsigned int exception_req_tag; | |
2548 | int rc; | |
2549 | ||
2550 | /* Clear the existing signals. Anything but SIGUSR1 is converted | |
2551 | * into a high-priority EXIT exception. */ | |
2552 | for (;;) { | |
2553 | sig = dequeue_signal_lock(current, ¤t->blocked, &info); | |
2554 | if (!sig) | |
2555 | break; | |
2556 | if (sig != SIGUSR1) { | |
2557 | if (fsg->state < FSG_STATE_EXIT) | |
2558 | DBG(fsg, "Main thread exiting on signal\n"); | |
2559 | raise_exception(fsg, FSG_STATE_EXIT); | |
2560 | } | |
2561 | } | |
2562 | ||
2563 | /* Cancel all the pending transfers */ | |
d5e2b67a | 2564 | for (i = 0; i < FSG_NUM_BUFFERS; ++i) { |
a41ae418 | 2565 | bh = &fsg->common->buffhds[i]; |
d5e2b67a MN |
2566 | if (bh->inreq_busy) |
2567 | usb_ep_dequeue(fsg->bulk_in, bh->inreq); | |
2568 | if (bh->outreq_busy) | |
2569 | usb_ep_dequeue(fsg->bulk_out, bh->outreq); | |
2570 | } | |
2571 | ||
2572 | /* Wait until everything is idle */ | |
2573 | for (;;) { | |
a41ae418 | 2574 | int num_active = 0; |
d5e2b67a | 2575 | for (i = 0; i < FSG_NUM_BUFFERS; ++i) { |
a41ae418 | 2576 | bh = &fsg->common->buffhds[i]; |
d5e2b67a MN |
2577 | num_active += bh->inreq_busy + bh->outreq_busy; |
2578 | } | |
2579 | if (num_active == 0) | |
2580 | break; | |
2581 | if (sleep_thread(fsg)) | |
2582 | return; | |
2583 | } | |
2584 | ||
2585 | /* Clear out the controller's fifos */ | |
2586 | if (fsg->bulk_in_enabled) | |
2587 | usb_ep_fifo_flush(fsg->bulk_in); | |
2588 | if (fsg->bulk_out_enabled) | |
2589 | usb_ep_fifo_flush(fsg->bulk_out); | |
d5e2b67a MN |
2590 | |
2591 | /* Reset the I/O buffer states and pointers, the SCSI | |
2592 | * state, and the exception. Then invoke the handler. */ | |
2593 | spin_lock_irq(&fsg->lock); | |
2594 | ||
2595 | for (i = 0; i < FSG_NUM_BUFFERS; ++i) { | |
a41ae418 | 2596 | bh = &fsg->common->buffhds[i]; |
d5e2b67a MN |
2597 | bh->state = BUF_STATE_EMPTY; |
2598 | } | |
a41ae418 MN |
2599 | fsg->common->next_buffhd_to_fill = fsg->common->next_buffhd_to_drain = |
2600 | &fsg->common->buffhds[0]; | |
d5e2b67a MN |
2601 | |
2602 | exception_req_tag = fsg->exception_req_tag; | |
2603 | new_config = fsg->new_config; | |
2604 | old_state = fsg->state; | |
2605 | ||
2606 | if (old_state == FSG_STATE_ABORT_BULK_OUT) | |
2607 | fsg->state = FSG_STATE_STATUS_PHASE; | |
2608 | else { | |
a41ae418 MN |
2609 | for (i = 0; i < fsg->common->nluns; ++i) { |
2610 | curlun = &fsg->common->luns[i]; | |
d5e2b67a MN |
2611 | curlun->prevent_medium_removal = 0; |
2612 | curlun->sense_data = curlun->unit_attention_data = | |
2613 | SS_NO_SENSE; | |
2614 | curlun->sense_data_info = 0; | |
2615 | curlun->info_valid = 0; | |
2616 | } | |
2617 | fsg->state = FSG_STATE_IDLE; | |
2618 | } | |
2619 | spin_unlock_irq(&fsg->lock); | |
2620 | ||
2621 | /* Carry out any extra actions required for the exception */ | |
2622 | switch (old_state) { | |
2623 | default: | |
2624 | break; | |
2625 | ||
2626 | case FSG_STATE_ABORT_BULK_OUT: | |
2627 | send_status(fsg); | |
2628 | spin_lock_irq(&fsg->lock); | |
2629 | if (fsg->state == FSG_STATE_STATUS_PHASE) | |
2630 | fsg->state = FSG_STATE_IDLE; | |
2631 | spin_unlock_irq(&fsg->lock); | |
2632 | break; | |
2633 | ||
2634 | case FSG_STATE_RESET: | |
2635 | /* In case we were forced against our will to halt a | |
2636 | * bulk endpoint, clear the halt now. (The SuperH UDC | |
2637 | * requires this.) */ | |
2638 | if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) | |
2639 | usb_ep_clear_halt(fsg->bulk_in); | |
2640 | ||
93bcf12e MN |
2641 | if (fsg->ep0_req_tag == exception_req_tag) |
2642 | ep0_queue(fsg); // Complete the status stage | |
d5e2b67a MN |
2643 | |
2644 | /* Technically this should go here, but it would only be | |
2645 | * a waste of time. Ditto for the INTERFACE_CHANGE and | |
2646 | * CONFIG_CHANGE cases. */ | |
a41ae418 MN |
2647 | // for (i = 0; i < fsg->common->nluns; ++i) |
2648 | // fsg->common->luns[i].unit_attention_data = SS_RESET_OCCURRED; | |
d5e2b67a MN |
2649 | break; |
2650 | ||
2651 | case FSG_STATE_INTERFACE_CHANGE: | |
2652 | rc = do_set_interface(fsg, 0); | |
2653 | if (fsg->ep0_req_tag != exception_req_tag) | |
2654 | break; | |
2655 | if (rc != 0) // STALL on errors | |
2656 | fsg_set_halt(fsg, fsg->ep0); | |
2657 | else // Complete the status stage | |
2658 | ep0_queue(fsg); | |
2659 | break; | |
2660 | ||
2661 | case FSG_STATE_CONFIG_CHANGE: | |
2662 | rc = do_set_config(fsg, new_config); | |
2663 | if (fsg->ep0_req_tag != exception_req_tag) | |
2664 | break; | |
2665 | if (rc != 0) // STALL on errors | |
2666 | fsg_set_halt(fsg, fsg->ep0); | |
2667 | else // Complete the status stage | |
2668 | ep0_queue(fsg); | |
2669 | break; | |
2670 | ||
2671 | case FSG_STATE_DISCONNECT: | |
a41ae418 MN |
2672 | for (i = 0; i < fsg->common->nluns; ++i) |
2673 | fsg_lun_fsync_sub(&fsg->common->luns[i]); | |
d5e2b67a MN |
2674 | do_set_config(fsg, 0); // Unconfigured state |
2675 | break; | |
2676 | ||
2677 | case FSG_STATE_EXIT: | |
2678 | case FSG_STATE_TERMINATED: | |
2679 | do_set_config(fsg, 0); // Free resources | |
2680 | spin_lock_irq(&fsg->lock); | |
2681 | fsg->state = FSG_STATE_TERMINATED; // Stop the thread | |
2682 | spin_unlock_irq(&fsg->lock); | |
2683 | break; | |
2684 | } | |
2685 | } | |
2686 | ||
2687 | ||
2688 | /*-------------------------------------------------------------------------*/ | |
2689 | ||
2690 | static int fsg_main_thread(void *fsg_) | |
2691 | { | |
2692 | struct fsg_dev *fsg = fsg_; | |
2693 | ||
2694 | /* Allow the thread to be killed by a signal, but set the signal mask | |
2695 | * to block everything but INT, TERM, KILL, and USR1. */ | |
2696 | allow_signal(SIGINT); | |
2697 | allow_signal(SIGTERM); | |
2698 | allow_signal(SIGKILL); | |
2699 | allow_signal(SIGUSR1); | |
2700 | ||
2701 | /* Allow the thread to be frozen */ | |
2702 | set_freezable(); | |
2703 | ||
2704 | /* Arrange for userspace references to be interpreted as kernel | |
2705 | * pointers. That way we can pass a kernel pointer to a routine | |
2706 | * that expects a __user pointer and it will work okay. */ | |
2707 | set_fs(get_ds()); | |
2708 | ||
2709 | /* The main loop */ | |
2710 | while (fsg->state != FSG_STATE_TERMINATED) { | |
2711 | if (exception_in_progress(fsg) || signal_pending(current)) { | |
2712 | handle_exception(fsg); | |
2713 | continue; | |
2714 | } | |
2715 | ||
2716 | if (!fsg->running) { | |
2717 | sleep_thread(fsg); | |
2718 | continue; | |
2719 | } | |
2720 | ||
2721 | if (get_next_command(fsg)) | |
2722 | continue; | |
2723 | ||
2724 | spin_lock_irq(&fsg->lock); | |
2725 | if (!exception_in_progress(fsg)) | |
2726 | fsg->state = FSG_STATE_DATA_PHASE; | |
2727 | spin_unlock_irq(&fsg->lock); | |
2728 | ||
2729 | if (do_scsi_command(fsg) || finish_reply(fsg)) | |
2730 | continue; | |
2731 | ||
2732 | spin_lock_irq(&fsg->lock); | |
2733 | if (!exception_in_progress(fsg)) | |
2734 | fsg->state = FSG_STATE_STATUS_PHASE; | |
2735 | spin_unlock_irq(&fsg->lock); | |
2736 | ||
2737 | if (send_status(fsg)) | |
2738 | continue; | |
2739 | ||
2740 | spin_lock_irq(&fsg->lock); | |
2741 | if (!exception_in_progress(fsg)) | |
2742 | fsg->state = FSG_STATE_IDLE; | |
2743 | spin_unlock_irq(&fsg->lock); | |
2744 | } | |
2745 | ||
2746 | spin_lock_irq(&fsg->lock); | |
2747 | fsg->thread_task = NULL; | |
2748 | spin_unlock_irq(&fsg->lock); | |
2749 | ||
2750 | /* If we are exiting because of a signal, unregister the | |
2751 | * gadget driver. */ | |
2752 | if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) | |
2753 | usb_gadget_unregister_driver(&fsg_driver); | |
2754 | ||
2755 | /* Let the unbind and cleanup routines know the thread has exited */ | |
2756 | complete_and_exit(&fsg->thread_notifier, 0); | |
2757 | } | |
2758 | ||
2759 | ||
2760 | /*-------------------------------------------------------------------------*/ | |
2761 | ||
2762 | ||
2763 | /* The write permissions and store_xxx pointers are set in fsg_bind() */ | |
2764 | static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); | |
2765 | static DEVICE_ATTR(file, 0444, fsg_show_file, NULL); | |
2766 | ||
2767 | ||
2768 | /*-------------------------------------------------------------------------*/ | |
2769 | ||
a41ae418 | 2770 | static void fsg_release(struct fsg_dev *fsg) |
d5e2b67a | 2771 | { |
a41ae418 | 2772 | kfree(fsg->common->luns); |
d5e2b67a MN |
2773 | kfree(fsg); |
2774 | } | |
2775 | ||
2776 | static void lun_release(struct device *dev) | |
2777 | { | |
d5e2b67a MN |
2778 | } |
2779 | ||
2780 | static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) | |
2781 | { | |
2782 | struct fsg_dev *fsg = get_gadget_data(gadget); | |
2783 | int i; | |
2784 | struct fsg_lun *curlun; | |
2785 | struct usb_request *req = fsg->ep0req; | |
2786 | ||
2787 | DBG(fsg, "unbind\n"); | |
2788 | clear_bit(REGISTERED, &fsg->atomic_bitflags); | |
2789 | ||
2790 | /* Unregister the sysfs attribute files and the LUNs */ | |
a41ae418 MN |
2791 | for (i = 0; i < fsg->common->nluns; ++i) { |
2792 | curlun = &fsg->common->luns[i]; | |
d5e2b67a MN |
2793 | if (curlun->registered) { |
2794 | device_remove_file(&curlun->dev, &dev_attr_ro); | |
2795 | device_remove_file(&curlun->dev, &dev_attr_file); | |
2796 | fsg_lun_close(curlun); | |
2797 | device_unregister(&curlun->dev); | |
2798 | curlun->registered = 0; | |
2799 | } | |
2800 | } | |
2801 | ||
2802 | /* If the thread isn't already dead, tell it to exit now */ | |
2803 | if (fsg->state != FSG_STATE_TERMINATED) { | |
2804 | raise_exception(fsg, FSG_STATE_EXIT); | |
2805 | wait_for_completion(&fsg->thread_notifier); | |
2806 | ||
2807 | /* The cleanup routine waits for this completion also */ | |
2808 | complete(&fsg->thread_notifier); | |
2809 | } | |
2810 | ||
d5e2b67a MN |
2811 | /* Free the request and buffer for endpoint 0 */ |
2812 | if (req) { | |
2813 | kfree(req->buf); | |
2814 | usb_ep_free_request(fsg->ep0, req); | |
2815 | } | |
2816 | ||
2817 | set_gadget_data(gadget, NULL); | |
2818 | } | |
2819 | ||
2820 | ||
2821 | static int __init check_parameters(struct fsg_dev *fsg) | |
2822 | { | |
d5e2b67a MN |
2823 | int gcnum; |
2824 | ||
d5e2b67a MN |
2825 | /* Some peripheral controllers are known not to be able to |
2826 | * halt bulk endpoints correctly. If one of them is present, | |
2827 | * disable stalls. | |
2828 | */ | |
2829 | if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget)) | |
2830 | mod_data.can_stall = 0; | |
2831 | ||
2832 | if (mod_data.release == 0xffff) { // Parameter wasn't set | |
2833 | /* The sa1100 controller is not supported */ | |
2834 | if (gadget_is_sa1100(fsg->gadget)) | |
2835 | gcnum = -1; | |
2836 | else | |
2837 | gcnum = usb_gadget_controller_number(fsg->gadget); | |
2838 | if (gcnum >= 0) | |
2839 | mod_data.release = 0x0300 + gcnum; | |
2840 | else { | |
2841 | WARNING(fsg, "controller '%s' not recognized\n", | |
2842 | fsg->gadget->name); | |
2843 | mod_data.release = 0x0399; | |
2844 | } | |
2845 | } | |
2846 | ||
d5e2b67a MN |
2847 | return 0; |
2848 | } | |
2849 | ||
2850 | ||
2851 | static int __init fsg_bind(struct usb_gadget *gadget) | |
2852 | { | |
2853 | struct fsg_dev *fsg = the_fsg; | |
2854 | int rc; | |
2855 | int i; | |
2856 | struct fsg_lun *curlun; | |
2857 | struct usb_ep *ep; | |
2858 | struct usb_request *req; | |
2859 | char *pathbuf, *p; | |
2860 | ||
2861 | fsg->gadget = gadget; | |
2862 | set_gadget_data(gadget, fsg); | |
2863 | fsg->ep0 = gadget->ep0; | |
2864 | fsg->ep0->driver_data = fsg; | |
2865 | ||
2866 | if ((rc = check_parameters(fsg)) != 0) | |
2867 | goto out; | |
2868 | ||
2869 | if (mod_data.removable) { // Enable the store_xxx attributes | |
2870 | dev_attr_file.attr.mode = 0644; | |
2871 | dev_attr_file.store = fsg_store_file; | |
2872 | if (!mod_data.cdrom) { | |
2873 | dev_attr_ro.attr.mode = 0644; | |
2874 | dev_attr_ro.store = fsg_store_ro; | |
2875 | } | |
2876 | } | |
2877 | ||
2878 | /* Find out how many LUNs there should be */ | |
2879 | i = mod_data.nluns; | |
2880 | if (i == 0) | |
2881 | i = max(mod_data.num_filenames, 1u); | |
2882 | if (i > FSG_MAX_LUNS) { | |
2883 | ERROR(fsg, "invalid number of LUNs: %d\n", i); | |
2884 | rc = -EINVAL; | |
2885 | goto out; | |
2886 | } | |
2887 | ||
2888 | /* Create the LUNs, open their backing files, and register the | |
2889 | * LUN devices in sysfs. */ | |
a41ae418 MN |
2890 | fsg->common->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL); |
2891 | if (!fsg->common->luns) { | |
d5e2b67a MN |
2892 | rc = -ENOMEM; |
2893 | goto out; | |
2894 | } | |
a41ae418 | 2895 | fsg->common->nluns = i; |
d5e2b67a | 2896 | |
a41ae418 MN |
2897 | for (i = 0; i < fsg->common->nluns; ++i) { |
2898 | curlun = &fsg->common->luns[i]; | |
d5e2b67a MN |
2899 | curlun->cdrom = !!mod_data.cdrom; |
2900 | curlun->ro = mod_data.cdrom || mod_data.ro[i]; | |
2901 | curlun->initially_ro = curlun->ro; | |
2902 | curlun->removable = mod_data.removable; | |
2903 | curlun->dev.release = lun_release; | |
2904 | curlun->dev.parent = &gadget->dev; | |
2905 | curlun->dev.driver = &fsg_driver.driver; | |
a41ae418 | 2906 | dev_set_drvdata(&curlun->dev, &fsg->common->filesem); |
d5e2b67a MN |
2907 | dev_set_name(&curlun->dev,"%s-lun%d", |
2908 | dev_name(&gadget->dev), i); | |
2909 | ||
2910 | if ((rc = device_register(&curlun->dev)) != 0) { | |
2911 | INFO(fsg, "failed to register LUN%d: %d\n", i, rc); | |
2912 | goto out; | |
2913 | } | |
2914 | if ((rc = device_create_file(&curlun->dev, | |
2915 | &dev_attr_ro)) != 0 || | |
2916 | (rc = device_create_file(&curlun->dev, | |
2917 | &dev_attr_file)) != 0) { | |
2918 | device_unregister(&curlun->dev); | |
2919 | goto out; | |
2920 | } | |
2921 | curlun->registered = 1; | |
d5e2b67a MN |
2922 | |
2923 | if (mod_data.file[i] && *mod_data.file[i]) { | |
2924 | if ((rc = fsg_lun_open(curlun, | |
2925 | mod_data.file[i])) != 0) | |
2926 | goto out; | |
2927 | } else if (!mod_data.removable) { | |
2928 | ERROR(fsg, "no file given for LUN%d\n", i); | |
2929 | rc = -EINVAL; | |
2930 | goto out; | |
2931 | } | |
2932 | } | |
2933 | ||
2934 | /* Find all the endpoints we will use */ | |
2935 | usb_ep_autoconfig_reset(gadget); | |
2936 | ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); | |
2937 | if (!ep) | |
2938 | goto autoconf_fail; | |
2939 | ep->driver_data = fsg; // claim the endpoint | |
2940 | fsg->bulk_in = ep; | |
2941 | ||
2942 | ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); | |
2943 | if (!ep) | |
2944 | goto autoconf_fail; | |
2945 | ep->driver_data = fsg; // claim the endpoint | |
2946 | fsg->bulk_out = ep; | |
2947 | ||
d5e2b67a MN |
2948 | /* Fix up the descriptors */ |
2949 | device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket; | |
d5e2b67a MN |
2950 | device_desc.bcdDevice = cpu_to_le16(mod_data.release); |
2951 | ||
d5e2b67a | 2952 | if (gadget_is_dualspeed(gadget)) { |
d5e2b67a MN |
2953 | /* Assume ep0 uses the same maxpacket value for both speeds */ |
2954 | dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; | |
2955 | ||
2956 | /* Assume endpoint addresses are the same for both speeds */ | |
2957 | fsg_hs_bulk_in_desc.bEndpointAddress = | |
2958 | fsg_fs_bulk_in_desc.bEndpointAddress; | |
2959 | fsg_hs_bulk_out_desc.bEndpointAddress = | |
2960 | fsg_fs_bulk_out_desc.bEndpointAddress; | |
d5e2b67a MN |
2961 | } |
2962 | ||
2963 | if (gadget_is_otg(gadget)) | |
2964 | fsg_otg_desc.bmAttributes |= USB_OTG_HNP; | |
2965 | ||
2966 | rc = -ENOMEM; | |
2967 | ||
2968 | /* Allocate the request and buffer for endpoint 0 */ | |
2969 | fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL); | |
2970 | if (!req) | |
2971 | goto out; | |
2972 | req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL); | |
2973 | if (!req->buf) | |
2974 | goto out; | |
2975 | req->complete = ep0_complete; | |
2976 | ||
d5e2b67a MN |
2977 | /* This should reflect the actual gadget power source */ |
2978 | usb_gadget_set_selfpowered(gadget); | |
2979 | ||
2980 | snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer, | |
2981 | "%s %s with %s", | |
2982 | init_utsname()->sysname, init_utsname()->release, | |
2983 | gadget->name); | |
2984 | ||
2985 | /* On a real device, serial[] would be loaded from permanent | |
2986 | * storage. We just encode it from the driver version string. */ | |
2987 | for (i = 0; i < sizeof fsg_string_serial - 2; i += 2) { | |
2988 | unsigned char c = DRIVER_VERSION[i / 2]; | |
2989 | ||
2990 | if (!c) | |
2991 | break; | |
2992 | sprintf(&fsg_string_serial[i], "%02X", c); | |
2993 | } | |
2994 | ||
2995 | fsg->thread_task = kthread_create(fsg_main_thread, fsg, | |
2996 | "file-storage-gadget"); | |
2997 | if (IS_ERR(fsg->thread_task)) { | |
2998 | rc = PTR_ERR(fsg->thread_task); | |
2999 | goto out; | |
3000 | } | |
3001 | ||
3002 | INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); | |
a41ae418 | 3003 | INFO(fsg, "Number of LUNs=%d\n", fsg->common->nluns); |
d5e2b67a MN |
3004 | |
3005 | pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); | |
a41ae418 MN |
3006 | for (i = 0; i < fsg->common->nluns; ++i) { |
3007 | curlun = &fsg->common->luns[i]; | |
d5e2b67a MN |
3008 | if (fsg_lun_is_open(curlun)) { |
3009 | p = NULL; | |
3010 | if (pathbuf) { | |
3011 | p = d_path(&curlun->filp->f_path, | |
3012 | pathbuf, PATH_MAX); | |
3013 | if (IS_ERR(p)) | |
3014 | p = NULL; | |
3015 | } | |
3016 | LINFO(curlun, "ro=%d, file: %s\n", | |
3017 | curlun->ro, (p ? p : "(error)")); | |
3018 | } | |
3019 | } | |
3020 | kfree(pathbuf); | |
3021 | ||
d5e2b67a MN |
3022 | DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n", |
3023 | mod_data.removable, mod_data.can_stall, | |
93bcf12e | 3024 | mod_data.cdrom, FSG_BUFLEN); |
d5e2b67a MN |
3025 | DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task)); |
3026 | ||
3027 | set_bit(REGISTERED, &fsg->atomic_bitflags); | |
3028 | ||
3029 | /* Tell the thread to start working */ | |
3030 | wake_up_process(fsg->thread_task); | |
3031 | return 0; | |
3032 | ||
3033 | autoconf_fail: | |
3034 | ERROR(fsg, "unable to autoconfigure all endpoints\n"); | |
3035 | rc = -ENOTSUPP; | |
3036 | ||
3037 | out: | |
3038 | fsg->state = FSG_STATE_TERMINATED; // The thread is dead | |
3039 | fsg_unbind(gadget); | |
3040 | complete(&fsg->thread_notifier); | |
3041 | return rc; | |
3042 | } | |
3043 | ||
3044 | ||
d5e2b67a MN |
3045 | /*-------------------------------------------------------------------------*/ |
3046 | ||
3047 | static struct usb_gadget_driver fsg_driver = { | |
3048 | #ifdef CONFIG_USB_GADGET_DUALSPEED | |
3049 | .speed = USB_SPEED_HIGH, | |
3050 | #else | |
3051 | .speed = USB_SPEED_FULL, | |
3052 | #endif | |
3053 | .function = (char *) fsg_string_product, | |
3054 | .bind = fsg_bind, | |
3055 | .unbind = fsg_unbind, | |
3056 | .disconnect = fsg_disconnect, | |
3057 | .setup = fsg_setup, | |
d5e2b67a MN |
3058 | |
3059 | .driver = { | |
3060 | .name = DRIVER_NAME, | |
3061 | .owner = THIS_MODULE, | |
3062 | // .release = ... | |
3063 | // .suspend = ... | |
3064 | // .resume = ... | |
3065 | }, | |
3066 | }; | |
3067 | ||
3068 | ||
3069 | static int __init fsg_alloc(void) | |
3070 | { | |
3071 | struct fsg_dev *fsg; | |
606206c2 MN |
3072 | struct fsg_buffhd *bh; |
3073 | unsigned i; | |
d5e2b67a MN |
3074 | |
3075 | fsg = kzalloc(sizeof *fsg, GFP_KERNEL); | |
3076 | if (!fsg) | |
3077 | return -ENOMEM; | |
a41ae418 MN |
3078 | |
3079 | fsg->common = kzalloc(sizeof *fsg->common, GFP_KERNEL); | |
3080 | if (!fsg->common) { | |
3081 | kfree(fsg); | |
3082 | return -ENOMEM; | |
3083 | } | |
3084 | ||
606206c2 MN |
3085 | bh = fsg->common->buffhds; |
3086 | i = FSG_NUM_BUFFERS - 1; | |
3087 | do { | |
3088 | bh->next = bh + 1; | |
3089 | } while (++bh, --i); | |
3090 | bh->next = fsg->common->buffhds; | |
3091 | ||
d5e2b67a | 3092 | spin_lock_init(&fsg->lock); |
a41ae418 | 3093 | init_rwsem(&fsg->common->filesem); |
d5e2b67a MN |
3094 | init_completion(&fsg->thread_notifier); |
3095 | ||
3096 | the_fsg = fsg; | |
3097 | return 0; | |
3098 | } | |
3099 | ||
3100 | ||
3101 | static int __init fsg_init(void) | |
3102 | { | |
3103 | int rc; | |
3104 | struct fsg_dev *fsg; | |
3105 | ||
3106 | if ((rc = fsg_alloc()) != 0) | |
3107 | return rc; | |
3108 | fsg = the_fsg; | |
3109 | if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) | |
a41ae418 | 3110 | fsg_release(fsg); |
d5e2b67a MN |
3111 | return rc; |
3112 | } | |
3113 | module_init(fsg_init); | |
3114 | ||
3115 | ||
3116 | static void __exit fsg_cleanup(void) | |
3117 | { | |
3118 | struct fsg_dev *fsg = the_fsg; | |
3119 | ||
3120 | /* Unregister the driver iff the thread hasn't already done so */ | |
3121 | if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) | |
3122 | usb_gadget_unregister_driver(&fsg_driver); | |
3123 | ||
3124 | /* Wait for the thread to finish up */ | |
3125 | wait_for_completion(&fsg->thread_notifier); | |
3126 | ||
a41ae418 | 3127 | fsg_release(fsg); |
d5e2b67a MN |
3128 | } |
3129 | module_exit(fsg_cleanup); |